Phase Velocity Series
V52 · V5520 · V62 · V-Surround-II · V626
Installation Instructions
Thank you for your purchase of this Phase Velocity prod- CONTENTS:
Thank you
1
1
2
3
3
4
5
5
6
6
6
6
6
7
7
8
uct. Our mission and passion is to constantly advance
the art and science of accurate audio reproduction. We
are confident that your Phase Technology speaker will
accurately reproduce all the impact, detail and delicacy
of today’s digital technologies.
Table of Contents
Safety Instructions
Home Theater Speaker Placement
Subwoofer Application Note
Speaker Connections
Mounting Your Speaker On A Wall
V626 Foot Installation / Spike Installation
V5520 Foot Installation
We recommend that you take the time to read this
manual thoroughly before connecting speakers to your
amplifier or receiver. In the highly unlikely event that you
Table Top or Shelf Placement
should experience a problem with set-up or operation, Stereo / Two Channel Operation
Amplifier Setup and Bass Management
Caring for Your Phase Technology Speaker
Maintenance and Service
Troubleshooting
please contact one of our carefully chosen dealers for
assistance, or contact us directly.
Phase Technology Corporation
8650 College Boulevard
Specifications
Overland Park, KS 66210
(913) 663-9770 Telephone
(888) PHASE-TK Toll-Free (USA & Canada)
(913) 663-9790 Fax
R
Copyright © 2011 Phase Technology Corporation. All Rights Reserved.
A N M S E A U D I O G R O U P M E M B E R
Download from Www.Somanuals.com. All Manuals Search And Download.
HOME THEATER SPEAKER PLACEMENT
Today’s digital multi-channel home theater technology has elevated the art of “surround sound” to reproduce the movie theater
experience in your own home. Speaker requirements and placement are important when reproducing these multi-media
effects.
Two front speakers (left and right), two surround speakers (left and right), a center-channel speaker, and a subwoofer define
the minimum arrangement for multi-channel systems such as Dolby® Pro Logic, DTS®, Dolby® Digital, Dolby® TrueHD and
DTS® HD Master Audio. Your Phase Velocity speaker has been designed for optimal performance with these systems. You
will get the best results if you use the same type of speakers throughout your home theater (for example, match a pair of Phase
Velocity Bookshelf Speakers with the V626 Tower, V5520 Center Channel, and V-Surround-II units).
Placement of speakers in your room will impact the final listening experience. To position your speakers, there are some
general guidelines that take room size, shape, and fixtures and furnishings into account. Use the following illustrations as a
general guide for speaker placement in a typical home theater system.
LF
C
RF
LF
C
RF
SUB
SUB
SUB
RS
LS
LS
RS
LR
RR
5.1 HOME THEATER SYSTEM
7.2 HOME THEATER SYSTEM
In a 5.1 home theater system, the center channel (C) should be placed at
0º directly below or above the video screen, the left front (LF) and right front
(RF) speakers should be placed at 30º from the listening area, and the left
and right surrounds (LS and RS) should be placed at 110º. All five speakers
should be placed at or near ear level.
In a 7.2 home theater system, the center channel (C) should be placed at 0º
directly below or above the video screen, the left front (LF) and right front (RF)
speakers should be placed at 30º from the listening area, and the left and
right surrounds (LS and RS) should be placed at 90º. The left rear (LR) and
right rear (RR) speakers (sold separately) should be placed at 150º. All seven
speakers should be placed at or near ear level.
Front speakers should be placed 6-8 feet apart (or on the sides of your screen if your screen is wider) to fully separate the left
and right channels. Whether placed on speaker stands, on shelves, or on the wall your speakers should be at or slightly above
ear level.
Rear surround speakers also should be placed at or slightly above your listening position for the best reproduction of surround
sound effects. Ideally, they should be facing into your favorite listening position from either side of the room.
Center speaker placement should be, if possible, directly on top of or under your TV monitor or projection TV screen, in a
horizontal orientation, centered with your video screen. This correctly positions the critical sound track information (usually
dialogue) that filmmakers direct to the center channel.
SUBWOOFER APPLICATION NOTE
Subwoofer placement is less critical, because the frequencies they reproduce are omni directional. This means the human
ear doesn’t perceive these low frequencies as coming from a specific direction, enabling placement of a subwoofer virtually
anywhere in the listening room. It’s best, however, to keep a subwoofer within the sound field of the other speakers. The
closer the subwoofer is to a wall, the louder and more intense its bass output will be: this effect is even stronger when the sub
3
Download from Www.Somanuals.com. All Manuals Search And Download.
is placed in or near a room’s corner. If using two subwoofers, start by placing them next to the front left and right speakers,
in both front corners or one in the corner and one 1/3 of the way along the front wall from the corner. Each room is different.
Experiment with these options or try other locations until you get the best results. If you must choose a less-than-ideal position,
the output level of Phase Technology powered subwoofers is adjustable to compensate for your listening environment. Please
refer to your subwoofer manual for more information.
SPEAKER CONNECTIONS
The following instructions apply whether you are using a separate amplifier or Home Theater receiver. For simplicity we will use
the term “amplifier” throughout this manual to mean both.
Special note: Turn off and unplug your amplifier before connecting speakers.
Special Note: Observe Speaker Polarity Carefully!
Every cable, speaker and amplifier is clearly marked to show their positive (+) and negative (-) ter-
minals. Amps and speakers may use some combination of these symbols and/or colors to indicate
positive (usually red) and negative (usually black or white) connections. One strand of your cable will
also be ridged and/or marked with a colored line or other indicator on the positive side. For proper
polarity and, thus, ideal system performance, always connect the positive side of the cable to the
positive terminals on your speakers and amplifier and the negative side of the cable to the negative
terminals.
Front Speakers: The pair of front speaker connections (left and right) on your amplifier will be labeled “Front” or “Main.” Connect
the speaker cables for your left and right front speakers using these terminals and then connect the cables to the front
satellites. Observe positive and negative polarities.
V626 Bi-Wiring: The V626 speaker is equipped with bi-wiring, with four speaker terminals instead of two. This may enhance
speaker performance by using an additional pair of speaker cables. In order to bi-wire this speaker, remove the gold-plated
strips between the speaker terminals and connect two cables between your amplifier’s positive output terminal and the two
positive (red) terminals on the speaker. Then connect the other two cables between the amp’s negative output terminal and
the two negative (black) terminals on the speakers. If you choose not to bi-wire your speakers, do not remove the metal strips
between the speaker terminals. Connect each cable in the standard manner, with one cable each between the positive and
negative speaker terminals and your amplifier.
Center Speaker: The center speaker connections on your amplifier will be labeled “Center” or “Center Channel.” Connect the
speaker cables for your center channel speaker using these terminals and then connect the cables to the center speaker.
Observe positive and negative polarities.
Surround Speakers: The pair of surround connections (left and right) on your amplifier will be labeled “Surround.” Connect
the speaker cables for your left and right surround speakers using these terminals and then connect the cables to surround
satellite speakers. Observe positive and negative polarities.
Phase Velocity Surround speakers are marked with arrows indicating “left” or “right” to denote how
the speaker should point into the listening area. Make sure you are connecting the proper speaker
to the proper set of wires before mounting.
Rear Surround Speakers (used in 7.1 and 7.2 systems): The rear channels (left and right) on your amplifier will be labeled “Left /
Right Rear Channels” or “Left / Right Back Surrounds”. Connect the speaker cables for your left and right rear speakers using
these terminals and then connect the cables to the rear speakers. Observe positive and negative polarities.
Subwoofers: Phase Technology recommends the use of HV Series or Power FL subwoofers with the Phase Velocity system,
however, any subwoofer will work. Please consult your subwoofer’s installation manual for connection instructions.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Left
LCR
Right
LCR
Subwoofer
Center LCR
Line Input
Ampliꢀer Panel
SUB OUT
Right
Front
Left Right
Rear Rear
Left Right
Surr. Surr.
Left
Front
Center
Channel
Left
Right
Surround
Surround
Left
Rear
Right
Rear
MOUNTING YOUR PHASE VELOCITY SPEAKER ON A WALL
The V-Surround-II speaker includes a keyhole type insert for on-wall mounting. Use a #6 screw in a drywall anchor capable
of holding 2-3 times the weight of the speaker in the location you wish to mount the speaker. Then slide the keyhole over the
screw. The self adhesive bumpers included with the speaker may be used on the rear of the speaker to provide a gap for
running speaker wires.
Make certain that your wall anchors are capable of supporting the weight of the speaker!
The V52, V62 and V5520 speaker includes M6 (6mm) threaded inserts for use with standard wall mounting brackets (available
from third party vendors). Please refer to the vendors’ instructions for mounting speakers to their wall mounting brackets.
V626 FOOT INSTALLATION
The V626 Tower Speaker comes with four feet that mount to the bottom of the unit. To mount the feet, turn the speaker over,
place each foot in place on a corner of the unit so that the screw holes line up with the threaded inserts on the speaker, and
attach the feet using the provided screws. Tighten snugly but do not over tighten.
V626 Floor Spikes
Floor spikes are provided with V626 speakers to steady the speaker cabinets, especially on carpeting and
uneven floor surfaces. Because most speakers tend to rock back and forth in small increments due to the force of the in/out
motions of speaker drivers, these movements can affect the speakers’ performance. Attach the floor spikes by screwing them
into the pre-drilled holes in the base of the speaker (they will attach through the speaker feet; be sure to attach feet first) and
tighten the nuts securely. The sharp points will penetrate the carpet to make a more solid contract with the underlying floor
surface.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
If your floor is not rigid, the spikes may actually add to the rocking motion, so we recommend you audition the speakers with
and without the spikes inserted to see if you discover a personal preference in the sound quality. Be especially careful when
moving speaker cabinets with the spikes attached, as the points could damage carpeting or scratch floors.
V5520 FOOT INSTALLATION
Apply two of the provided adhesive bumpers to the two front corners of the speaker. Insert one of the two supplied 6mm
Phillips screws through the recessed hole of the plastic legs and screw the legs to the bottom of the speaker cabinet insert
locations. Adjust the angled end of the leg so it will set level on your shelf or tabletop before tightening the screws completely.
For vertical placement, apply the four adhesive bumpers to one end of the speaker, placing them at the corners of the cabinet.
TABLE TOP OR SHELF PLACEMENT (V52, V62, V5520, V-SURROUND-II)
Included with your Phase Velocity speaker are self adhesive bumpers that can be used on the bottom of the speaker to protect
the finish and surface when placing it on a shelf or table top. Simply peel off the bumpers from the backing paper and apply
them to the bottom of the speaker.
STEREO (TWO CHANNEL) OPERATION - FIRST LISTENING
Play a stereo CD that contains a strong solo vocalist. Sit at your normal listening position and listen to the singer. If the artist
sounds “center stage” with music coming between the speakers, the speakers are in phase. On the other hand, if vocals sound
as if they are coming from the two sides or are not focused in the central area, the speakers may be out of phase. In this event,
turn off the power, unplug your amplifier or receiver and check that the leads are hooked up correctly. Then, turn everything on
and listen again. When the sound is natural and the soloist appears to be in the middle of the sound stage, the speakers are in
phase.
Two-Channel Speaker Placement
Phase Technology speakers utilize our Absolute Phase™ crossover network. This design permits a much wider vertical
output pattern than conventional speakers, allowing you to achieve the best quality musical experience regardless of speaker
placement. For example, your speakers can be placed either vertically or horizontally on a bookshelf and will provide seamless
transition of sound from one speaker to another even if the speakers cannot be placed at the traditional “ear level” height
recommended by most manufacturers.
In most rectangular rooms speakers sound best when placed along one of the short walls. Begin by placing the speakers 1
– 3 feet away from the wall and approximately 6 – 8 feet apart. The exact final placement will be determined by how far away
you are sitting from the speakers and other interior environmental factors. We suggest playing a familiar piece of music and
adjusting the placement of the speakers until the desired sound is achieved.
Sometimes larger bookshelf speakers will sound better when placed upon stands designed expressly for the purpose of
supporting them above floor level. By “de-coupling” the speaker cabinet from the floor, bass frequencies are tighter and high
frequencies more distinct. Stands are available in a wide variety of types, sizes and price ranges from your local retailer.
Smaller speakers can be placed in bookshelves or cabinets; however, some loss of imaging may be experienced. Again, only
trial and error will determine the best possible result for your circumstances.
AMPLIFIER SETUP AND BASS MANAGEMENT
Many home theater receivers/processors have a feature that controls how the bass is processed and delivered to the subwoofer.
It also adjusts the amount of bass that is sent to your satellite speakers. Look carefully in your amplifier or receiver’s instruction
manual for details on how to adjust for the speaker size (sometimes called “Speaker Setup”) for your system.
CARING FOR YOUR PHASE TECHNOLOGY SPEAKER
All Phase Technology speakers are finished with a high degree of craftsmanship in either hand polished paint or vinyl laminates.
We recommend using a lint-free rag with a small amount of glass cleaner to maintain the long-lasting beauty of the finish. Avoid
products containing silicones, oils, oil derivatives, or solvents. Enclosures finished in vinyl laminates may be cleaned with a
damp cloth as necessary.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND SERVICE
Because of Phase Technology’s uncompromising quality control programs, it’s unlikely that your speakers will ever need
service if connected and used as outlined in this Owners’ Manual. In the unlikely event that a problem does occur, please
contact your Phase Technology dealer. Your dealer has the necessary factory-authorized parts and trained technicians to
quickly restore your speaker to its original performance specifications.
TROUBLESHOOTING
No sound
1.
2.
3.
Verify that all components are plugged in and turned on.
Check all speaker wires and cables for loose connections.
Check to see if you have selected the proper source on your amplifier.
Voices do not appear to come from between the speakers / bass response is weak
1.
2.
Verify that all speaker connections from the amplifier to the speakers are running PLUS+ to PLUS+ and MINUS- to
MINUS-.
Check to see if there are any furnishings or plants that may be blocking the output of a speaker. Make sure nothing
is directly in front of that speaker.
Sound, but no bass (most likely in systems with a subwoofer)
1.
2.
3.
4.
Verify that the subwoofer is plugged into an AC outlet and power is turned on.
Check that the speaker wire / cable going from the amplifier/receiver to the subwoofer is securely fastened.
Check the volume control of the subwoofer.
Refer to your amplifier/receiver manual to make sure you have adjusted its bass output properly.
Muddy or boomy bass
1.
2.
3.
4.
Check the volume control for the subwoofer. Excess volume can cause speakers to sound distorted and
unnatural.
Try adjusting the crossover control on the subwoofer (or the subwoofer setup on your receiver) to a slightly
lower frequency (example: reduce from 120 Hz to 80 or 60 Hz).
If the subwoofer or full size speaker is close to a corner, side or back wall, try moving it away from the wall.
This may reduce the “boomy” bass considerably.
Bookshelf speakers placed in a semi-enclosed space or cabinet can artificially emphasize bass output.
Reduce the bass control on your amplifier or move the speakers to the front of the cabinet. Alternatively,
reposition the speakers to a more open location.
Distorted sound from the speakers
1.
2.
This problem is usually caused by setting the volume control too high. Reduce the amplifier/receiver volume
to a lower level.
If noise and distortion are audible at higher volume levels, your amplifier may not be powerful enough.
Consider upgrading to a unit with higher power.
NOTE: Remember, even though your Phase Technology speakers can handle considerable power levels, ANY speaker if used
improperly can be damaged. Consult your Phase Technology dealer for assistance in choosing a new amplifier or receiver.
WARRANTY INFORMATION MAY BE FOUND ON THE WARRANTY CARD INCLUDED WITH YOUR PHASE VELOCITY SPEAKER.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
V52
V626
SPECIFICATIONS
Tweeter
1” soft dome
1” soft dome
Woofer
5.25” Vapor Deposited Titanium*
7.4” (W) x 10.75” (H) x 8.53” (D)
12 lbs.
2 x 6.5” Vapor Deposited Titanium
8.25” (W) x 40.5” (H) x 9.53” (D)
33 lbs.
Dimensions
Shipping Weight
System Frequency Response
Sensitivity
58Hz - 20 kHz ( 3dB)
88 dB
32 Hz - 20 kHz ( 3dB)
89 dB
Impedance
8 Ohms
8 Ohms
Finish
Black Ash Woodgrain Laminate
15-100w
Black Ash Woodgrain Laminate
15w - 150w
Recomended Amp Power
V62
V-Surround-II
Tweeter
1” soft dome
2 x 1” soft dome
Woofer
6.5” Vapor Deposited Titanium
8.25” (W) x 13.25” (H) x 9.53” (D)
17 lbs.
5.25” Vapor Deposited Titanium
11.94” (W) x 9” (H) x 4.5” (D)
18 lbs. / pair
Dimensions
Shipping Weight
System Frequency Response
Sensitivity
58Hz - 20 kHz ( 3dB)
88 dB
70 Hz - 20 Hz ( 3 dB)
87 dB
Impedance
8 Ohms
8 Ohms
Finish
Black Ash Woodgrain Laminate
15-100w
Black or white laminate
15w - 100w
Recomended Amp Power
V5520
Tweeter
Woofer
1” soft dome
1 x 5.25” Vapor Deposited Titanium
woofer, 1 x 5.25” VDT bass radiator
Dimensions
18” (W) x 8.53” (H) x 7.4” (D)
16 lbs.
Shipping Weight
System Frequency Response
Sensitivity
56 Hz - 20 kHz ( 3 dB)
88 dB
*Vapor Deposited Titanium is also
abbreviated as VDT
Impedance
8 Ohms
Finish
Black Ash Woodgrain Laminate
15-100w
Recomended Amp Power
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|