Panasonic Universal Remote EUR7722KM0 User Manual

Welcome to the world of Home Theater.  
This remote control is the key to your home theater experience.  
Remote Control Operation Guide  
Model No. EUR7722KM0  
First,  
turn on the receiver.  
Page 2  
Page 4  
Now, you can operate  
other Home Theater  
components.  
Page 2  
Page 4  
You may need to enter  
a code to operate  
some equipment.  
Page 3  
Page 5  
Page 6  
P PC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RQT7999-P  
H0405WM0  
DVD RECORDER  
Watching DVDs  
Switch on  
Operating the DVD recorder  
Select drive  
Switch on the television  
and select input  
If it does not change  
After performing the following  
operations, press this button again.  
Switch on the recorder  
and start play  
1. Press [DVD RECORDER].  
2. While pressing [ENTER], press and  
hold [8] for approximately  
2 seconds.  
Switch off  
To return  
In step 2 above, while pressing [ENTER],  
press and hold [9] for approximately  
2 seconds.  
Operating the DVD recorder  
The factory setting is [9].  
When using a Panasonic  
DVD recorder  
Clear the menus or return to  
the previous menu  
Change the units remote control code to  
match the remote control code of the DVD  
recorder.  
Show disc menus  
Show recorder  
menus  
Select and enter  
menu items  
Preparations: Check the remote control  
code of the DVD recorder.  
Stop play  
For about one second press [ENTER] and  
the button ([1], [2] or [3]) which is the same  
number as the remote control code set by  
the DVD recorder.  
Skip items during play  
Search through the disc  
Pause play  
The factory setting is [1].  
Start slow-motion play  
Start play from a selected item  
To view frame-by-frame  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
VCR  
CD PLAYER  
Listening to CDs  
Watching videotapes  
Switch on  
Switch on  
Switch on the television and select input  
Switch on the player and start play  
Switch off  
Switch on the player and start play  
Operating the CD player  
Switch off  
Start play from  
a selected track  
Operating the video deck  
Specify a disc  
[3- or 5-disc changer]  
Stop play  
Change the channels  
sequentially  
Start play from a specified disc  
[MEGA CD changer] (holds more than 50 discs)  
Pause play  
Stop play  
Skip tracks during play  
Pause play  
Select the channel  
directly  
Rewind or fast-forward  
(Press and hold)  
Search through the disc  
Download from Www.Somanuals.co4m. All Manuals Search And Download.  
RECEIVER  
Listening to the radio  
Adjusting speaker  
channel balance  
Switch off  
Select FM or AM  
(Press and hold)  
Start a test signal  
Operating the radio  
Select the speaker  
channel and adjust  
its output level  
Change the preset  
channels sequentially  
Stop the test signal  
Other functions  
To mute the volume  
Select the preset channel directly  
Select radio stations by frequency  
DOLBY PRO LOGIC x MODE  
Select MOVIE (DOLBY EX), MUSIC or  
GAME when Dolby Pro Logic x mode  
or Dolby Pro Logic mode is on  
To cancel  
Change  
the sound effect  
When you select MUSIC  
To adjust the volume  
DTS NEO:6 MODE  
Select a DTS NEO:6 mode:  
CINEMA or MUSIC  
To cancel  
To select  
DVD ANALOG 6CH  
Change  
the sound effect  
When you select MUSIC  
(Press and hold)  
To adjust subwoofer  
output level  
SFC MODE  
Select an SFC mode  
To cancel  
Dim the display  
Select the speaker channel  
and adjust its output level  
For selecting  
a re-master mode  
Change the sound effect  
Download from Www.Somanuals.co5m. All Manuals Search And Download.  
CODES  
This remote control can operate Panasonic and Technics audio-visual equipment that has remote control sensors.You may need to change the remote  
control code.  
It can also operate some other brands of televisions, video cassette players, and DVD players. Check the table for the brand and enter the code as follows.  
Changing the codes  
The remote control outputs the on/off signal.  
If the code is correct, the equipment  
turns on or off.  
DVD  
player  
TV  
VCR  
If it doesn’t, try entering another code.  
Press and hold the button  
corresponding to the equipment  
Enter the first digit  
Enter the second digit  
Note that this remote control cannot operate some equipment and that it may not be able to perform some operations.  
Re-enter the codes after you change the batteries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6

Milan Technology Switch MIL 4000H User Manual
Milwaukee Power Hammer 2416 20 User Manual
Moxa Technologies Network Card CP 102U UL User Manual
MTD Yard Vacuum 242 675A User Manual
Navini Networks Modem 40 00097 00 User Manual
NETGEAR Switch GSM7224R User Manual
Network Technologies Switch ST nXm U User Manual
Nortel Networks SONAR P0992639 01 User Manual
Novatel GPS Receiver DL L1 User Manual
Panasonic Air Compressor DC66C10RCU6 User Manual