VDE
NEW SUBMINIATURE
SWITCHES
WITH HIGH PRECISION
AV (FS•FS-T)
SWITCHES
FEATURES
• Consistent quality and high
precision through sophisticated
automatic fabrication system —O.P.:
8.4 0.3 mm (O.P.of conventional
subminiature switches: 8.4 0.5)
• Flux-resistant construction with
integrally molded terminals
• 2 lever pivot positions available for
applications where low operating
force is required
TYPICAL
APPLICATIONS
• Solder terminal; Self-standing,
internationally common pitch, right
angle, left angle terminals for PC
board; Quick connect .110 terminals
for easy mounting
FS
FS-T
• Communication equipment
• Vending machines
• Security systems
• Data systems
• Medical equipment
• VCR
• Insulation guard available for safety
mounting
PC board thickness:
1.6 mm
Compliance with RoHS Directive
CONSTRUCTION (Example: AV3/AVM3 type)
CONTACT
ARRANGEMENT
Standard version
Long life version
2 lever pivot positions
Spring
Arch-shaped independent spring
Solder-terminal
Self-standing PC terminal
.110 Quick connect terminal
COM
NO
NC
Flux resistant construction
Optional insulation guard
Remark: As for FS-T switches, the terminals are the different shape.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV3,AVM3/AVT3,AVL3
APPLICABLE CURRENT RANGE
O.F.
Rating
Type
Contact
1mA
100mA
3A
5A
0.25 N
0.49 N
0.98 N
1.47 N
Silver alloy contact
Standard
version
Gold-clad triple layer
contact type
Silver alloy contact
Long life
version
Gold-clad triple layer
contact type
Remark: For high capacity contact rating up to 10.1 A, please refer to PS (AVM3ⅪⅪⅪP) switches catalog.
PRODUCT TYPES
1. FS switches (In-line terminal type)
Standard type
Part No.
Self-standing solder terminal
Operating force,
Max.
Internationally
common pitch
PC terminal
Actuator
Self-standing
PC terminal
With opposite
side guard
Without guard
With guard
0.49N
0.98N
0.20N
0.39N
0.16N
0.34N
0.12N
0.25N
0.16N
0.34N
0.20N
0.39N
0.25N
0.49N
0.98N
0.098N
0.20N
0.39N
0.078N
0.16N
0.34N
0.12N
0.25N
0.16N
0.34N
0.20N
0.39N
AV32023
AV31023
AV33023
AV34023
AV35023
Pin plunger
AV32043
AV31043
AV33043
AV34043
AV35043
AV32123
AV31123
AV33123
AV34123
AV35123
Short hinge lever
Hinge lever
AV32143
AV31143
AV33143
AV34143
AV35143
AV32223
AV31223
AV33223
AV34223
AV35223
AV32243
AV31243
AV33243
AV34243
AV35243
AgNi alloy contact
type
AV32323
AV31323
AV33323
AV34323
AV35323
Long hinge lever
Simulated roller lever
Roller lever
AV32343
AV31343
AV33343
AV34343
AV35343
AV32423
AV31423
AV33423
AV34423
AV35423
AV32443
AV31443
AV33443
AV34443
AV35443
AV32523
AV31523
AV33523
AV34523
AV35523
AV32543
AV31543
AV33543
AV34543
AV35543
AV3200613
AV3202613
AV3204613
AV3210613
AV3212613
AV3214613
AV3220613
AV3222613
AV3224613
AV3232613
AV3234613
AV3242613
AV3244613
AV3252613
AV3254613
AV3100613
AV3102613
AV3104613
AV3110613
AV3112613
AV3114613
AV3120613
AV3122613
AV3124613
AV3132613
AV3134613
AV3142613
AV3144613
AV3152613
AV3154613
AV3300613
AV3302613
AV3304613
AV3310613
AV3312613
AV3314613
AV3320613
AV3322613
AV3324613
AV3332613
AV3334613
AV3342613
AV3344613
AV3352613
AV3354613
AV3400613
AV3402613
AV3404613
AV3410613
AV3412613
AV3414613
AV3420613
AV3422613
AV3424613
AV3432613
AV3434613
AV3442613
AV3444613
AV3452613
AV3454613
AV3500613
AV3502613
AV3504613
AV3510613
AV3512613
AV3514613
AV3520613
AV3522613
AV3524613
AV3532613
AV3534613
AV3542613
AV3544613
AV3552613
AV3554613
Pin plunger
Short hinge lever
Hinge lever
Gold-clad triple layer
contact type
Long hinge lever
Simulated roller lever
Roller lever
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV3,AVM3/AVT3,AVL3
Part No.
Operating force,
Max.
Actuator
Pin plunger
Right angle terminal
AV36023
Left angle terminal
.110 Quick-connect
AV38023
0.49N
0.98N
0.20N
0.39N
0.16N
0.34N
0.12N
0.25N
0.16N
0.34N
0.20N
0.39N
0.25N
0.49N
0.98N
0.098N
0.20N
0.39N
0.078N
0.16N
0.34N
0.12N
0.25N
0.16N
0.34N
0.20N
0.39N
AV37023
AV36043
AV37043
AV38043
AV36123
AV37123
AV38123
Short hinge lever
Hinge lever
AV36143
AV37143
AV38143
AV36223
AV37223
AV38223
AV36243
AV37243
AV38243
AgNi alloy contact
type
AV36323
AV37323
AV38323
Long hinge lever
Simulated roller lever
Roller lever
AV36343
AV37343
AV38343
AV36423
AV37423
AV38423
AV36443
AV37443
AV38443
AV36523
AV37523
AV38523
AV36543
AV37543
AV38543
AV3600613
AV3602613
AV3604613
AV3610613
AV3612613
AV3614613
AV3620613
AV3622613
AV3624613
AV3632613
AV3634613
AV3642613
AV3644613
AV3652613
AV3654613
AV3700613
AV3702613
AV3704613
AV3710613
AV3712613
AV3714613
AV3720613
AV3722613
AV3724613
AV3732613
AV3734613
AV3742613
AV3744613
AV3752613
AV3754613
AV3800613
AV3802613
AV3804613
AV3810613
AV3812613
AV3814613
AV3820613
AV3822613
AV3824613
AV3832613
AV3834613
AV3842613
AV3844613
AV3852613
AV3854613
Pin plunger
Short hinge lever
Hinge lever
Gold-clad triple layer
contact type
Long hinge lever
Simulated roller lever
Roller lever
Remark: When ordering, please refer to “Remarks” of ordering information.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV3,AVM3/AVT3,AVL3
2. FS-T switches (Cross-line terminal type)
Standard type
Part No.
Operating force,
Actuator
Solder terminal without
guard
.110 Quick-connect
terminal
Max.
PC terminal
0.49N
0.98N
0.20N
0.39N
0.16N
0.34N
0.12N
0.25N
0.16N
0.34N
0.20N
0.39N
0.25N
0.49N
0.98N
0.098N
0.20N
0.39N
0.078N
0.16N
0.34N
0.12N
0.25N
0.16N
0.34N
0.20N
0.39N
AVT32023
AVT34023
AVT38023
Pin plunger
AVT32043
AVT34043
AVT38043
AVT32123
AVT34123
AVT38123
Short hinge lever
Hinge lever
AVT32143
AVT34143
AVT38143
AVT32223
AVT34223
AVT38223
AVT32243
AVT34243
AVT38243
AgNi alloy contact
type
AVT32323
AVT34323
AVT38323
Long hinge lever
Simulated roller lever
Roller lever
AVT32343
AVT34343
AVT38343
AVT32423
AVT34423
AVT38423
AVT32443
AVT34443
AVT38443
AVT32523
AVT34523
AVT38523
AVT32543
AVT34543
AVT38543
AVT3200613
AVT3202613
AVT3204613
AVT3210613
AVT3212613
AVT3214613
AVT3220613
AVT3222613
AVT3224613
AVT3232613
AVT3234613
AVT3242613
AVT3244613
AVT3252613
AVT3254613
AVT3400613
AVT3402613
AVT3404613
AVT3410613
AVT3412613
AVT3414613
AVT3420613
AVT3422613
AVT3424613
AVT3432613
AVT3434613
AVT3442613
AVT3444613
AVT3452613
AVT3454613
AVT3800613
AVT3802613
AVT3804613
AVT3810613
AVT3812613
AVT3814613
AVT3820613
AVT3822613
AVT3824613
AVT3832613
AVT3834613
AVT3842613
AVT3844613
AVT3852613
AVT3854613
Pin plunger
Short hinge lever
Hinge lever
Gold-clad triple layer
contact type
Long hinge lever
Simulated roller lever
Roller lever
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV3,AVM3/AVT3,AVL3
3. FS switches (In-line terminal type)
Long life version
Part No.
Operating force,
Max.
Self-standing solder terminal
Internationally
common pitch
PC terminal
Actuator
Self-standing
PC terminal
With opposite
side guard
Without guard
With guard
Pin plunger
1.47N
0.59N
0.54N
0.44N
0.54N
0.59N
1.47N
0.59N
0.54N
0.44N
0.54N
0.59N
AVM32053
AVM32153
AVM32253
AVM32353
AVM32453
AVM32553
AVM31053
AVM31153
AVM31253
AVM31353
AVM31453
AVM31553
AVM33053
AVM33153
AVM33253
AVM33353
AVM33453
AVM33553
AVM34053
AVM34153
AVM34253
AVM34353
AVM34453
AVM34553
AVM35053
AVM35153
AVM35253
AVM35353
AVM35453
AVM35553
Short hinge lever
Hinge lever
AgNi alloy contact
type
Long hinge lever
Simulated roller lever
Roller lever
Pin plunger
AVM3205613 AVM3105613 AVM3305613 AVM3405613 AVM3505613
AVM3215613 AVM3115613 AVM3315613 AVM3415613 AVM3515613
AVM3225613 AVM3125613 AVM3325613 AVM3425613 AVM3525613
AVM3235613 AVM3135613 AVM3335613 AVM3435613 AVM3535613
AVM3245613 AVM3145613 AVM3345613 AVM3445613 AVM3545613
AVM3255613 AVM3155613 AVM3355613 AVM3455613 AVM3555613
Short hinge lever
Hinge lever
Gold-clad triple layer
contact type
Long hinge lever
Simulated roller lever
Roller lever
Part No.
Operating force,
Max.
Actuator
Right angle terminal
Without guard
AVM36053
Left angle terminal
With guard
.110 Quick-connect
With opposite side guard
AVM38053
Pin plunger
1.47N
0.59N
0.54N
0.44N
0.54N
0.59N
1.47N
0.59N
0.54N
0.44N
0.54N
0.59N
AVM37053
Short hinge lever
Hinge lever
AVM36153
AVM37153
AVM38153
AVM36253
AVM37253
AVM38253
AgNi alloy contact
type
Long hinge lever
Simulated roller lever
Roller lever
AVM36353
AVM37353
AVM38353
AVM36453
AVM37453
AVM38453
AVM36553
AVM37553
AVM38553
Pin plunger
AVM3605613
AVM3615613
AVM3625613
AVM3635613
AVM3645613
AVM3655613
AVM3705613
AVM3715613
AVM3725613
AVM3735613
AVM3745613
AVM3755613
AVM3805613
AVM3815613
AVM3825613
AVM3835613
AVM3845613
AVM3855613
Short hinge lever
Hinge lever
Gold-clad triple layer
contact type
Long hinge lever
Simulated roller lever
Roller lever
Remark: When ordering, please refer to “Remarks” of ordering information.
4. FS-T switches (Cross-line terminal type)
Long life version
Part No.
Operating force,
Actuator
Max.
Solder terminal Without
guard
.110 Quick-connect
terminal
PC terminal
Pin plunger
1.47N
0.59N
0.54N
0.44N
0.54N
0.59N
1.47N
0.59N
0.54N
0.44N
0.54N
0.59N
AVL32053
AVL34053
AVL38053
Short hinge lever
Hinge lever
AVL32153
AVL34153
AVL38153
AVL32253
AVL34253
AVL38253
AgNi alloy contact
type
Long hinge lever
Simulated roller lever
Roller lever
AVL32353
AVL34353
AVL38353
AVL32453
AVL34453
AVL38453
AVL32553
AVL34553
AVL38553
Pin plunger
AVL3205613
AVL3215613
AVL3225613
AVL3235613
AVL3245613
AVL3255613
AVL3405613
AVL3415613
AVL3425613
AVL3435613
AVL3445613
AVL3455613
AVL3805613
AVL3815613
AVL3825613
AVL3835613
AVL3845613
AVL3855613
Short hinge lever
Hinge lever
Gold-clad triple layer
contact type
Long hinge lever
Simulated roller lever
Roller lever
Remark: When ordering, please refer to “Remarks” of ordering information.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV3,AVM3/AVT3,AVL3
SPECIFICATIONS
1.Contact rating
Standard version
Long life version
AgNi alloy contact type
Gold-clad contact
type
Gold-clad contact
type
AgNi alloy contact type
Voltage
Triple layer
Triple layer
Resistive load
(cosφ]1)
Inductive load
(cosφ]0.6-0.7)
Resistive load
(cosφ]1)
Resistive load
(cosφ]1)
Inductive load
(cosφ]0.6-0.7)
Resistive load
(cosφ]1)
125V AC
250V AC
30V DC
3A
3A
2A
2A
0.1A
0.1A
0.1A
—
5A
5A
3A
3A
0.1A
0.1A
0.1A
—
3A
2A
5A
3A
125V DC
0.4A
0.05A
0.4A
0.05A
Remark: Time constant shall be less than 7 msec. for DC inductive loads.
2.Characteristics
Standard version
Long life version
AgNi alloy contact type
5 × 104 at 20 cpm
Gold-clad contact type
2 × 105 at 20 cpm
AgNi alloy contact type
5 × 104 at 20 cpm
Gold-clad contact type
2 × 105 at 20 cpm
Electrical life at rated load (O.T.max.)
Mechanical life
3 × 107 (O.T.: Specified value)
5 × 105 at 60 cpm (O.T.max.)
107 (O.T.max.) at 60 cpm
Insulation resistance
Min.100MΩ at 500V DC
Dielectric strength
Between non-continuous terminals
Between each terminal and other
exposed metal parts
1,000 Vrms
1,500 Vrms
1,500 Vrms
Between each terminal and ground
Vibration resistance (Pin plunger type)
10 to 55 Hz at single amplitude of 1.5mm (Contact opening: max.1 msec.)
294 m/s2 min.
294 m/s2 min.
(O.F. 0.98 N)
147 m/s2 min.
(O.F. 0.49 N)
49 m/s2 min.
(O.F. 0.25 N)
Shock resistance (Pin plunger type)
(Contact opening: less than 1 msec.)
(O.F. 0.98 N)
147 m/s2 min.
(O.F. 0.49 N)
294 m/s2 min.
50 mΩ max.
(by voltage drop 1 A
6 to 8V DC)
100 mΩ max.
(by voltage drop 0.1 A
6 to 8V DC)
Au: 50 mΩ max. (by voltage drop 0.1 A 6 to 8V DC)
Ag: 50 mΩ max. (by voltage drop 1 A 6 to 8V DC)
Contact resistance (Initial)
Allowable operating speed
Max.operating cycle rate
Ambient temeprature
Unit weight
0.1 to 1,000 mm/sec.
300 cpm
–25°C to +85°C (no freezing below 0°C)
Approx.2g
3.Operating characteristics
1) Pin plunger
4th digit
number of
Part No.
O.F.max.
R.F.min.
P.T.max.
0.6mm
M.D.max.
O.T.max.
0.4mm
O.P.
0
2
4
5
0.25N
0.49N
0.98N
1.47N
0.020N
0.074N
0.15N
Distance from mounting holes: 8.4 0.3mm
Distance from stand-off:
FS 11.8 0.4mm
0.1mm
FS-T 11.7 0.4mm
0.20N
2) Short hinge lever
4th digit
number of
Part No.
O.F.max.
R.F.min.
P.T.max.
2.5mm
M.D.max.
0.5mm
O.T.max.
0.8mm
O.P.
0
2
4
5
0.098N
0.20N
0.39N
0.59N
0.004N
0.017N
0.034N
0.039N
Distance from mounting holes: 8.8 0.8mm
Distance from stand-off:
FS 12.2 0.9mm
FS-T 12.1 0.9mm
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV3,AVM3/AVT3,AVL3
3) Hinge lever
4th digit
number of
Part No.
O.F.max.
R.F.min.
P.T.max.
2.8mm
M.D.max.
0.8mm
O.T.max.
1.2mm
O.P.
0
2
4
5
0.078N
0.16N
0.34N
0.54N
0.003N
0.015N
0.029N
0.034N
Distance from mounting holes: 8.8 0.8mm
Distance from stand-off:
FS 12.2 0.9mm
FS-T 12.1 0.9mm
4) Long hinge lever
4th digit
number of
Part No.
O.F.max.
R.F.min.
P.T.max.
3.5mm
M.D.max.
1.0mm
O.T.max.
1.6mm
O.P.
0
2
4
5
—
—
Distance from mounting holes: 8.8 1.2mm
Distance from stand-off:
FS 12.2 1.3mm
0.12N
0.25N
0.44N
0.012N
0.025N
0.029N
FS-T 12.1 1.3mm
5) Simulated roller lever
4th digit
number of
Part No.
O.F.max.
R.F.min.
P.T.max.
2.8mm
M.D.max.
0.8mm
O.T.max.
1.2mm
O.P.
0
—
—
Distance from mounting holes: 11.65 0.8mm
Distance from stand-off:
2
0.16N
0.34N
0.54N
0.015N
0.029N
0.034N
FS 15.05 0.9mm
FS-T 14.95 0.9mm
4
5
6) Roller lever
4th digit
number of
Part No.
O.F.max.
R.F.min.
P.T.max.
2.5mm
M.D.max.
0.5mm
O.T.max.
0.8mm
O.P.
0
2
4
5
—
—
Distance from mounting holes: 14.5 0.8mm
Distance from stand-off:
FS 17.9 0.9mm
0.20N
0.39N
0.59N
0.017N
0.034N
0.039N
FS-T 17.8 0.9mm
mm General tolerance: 0.25
DIMENSIONS
1. FS switches (In-line terminal type)
1-(1) Solder terminal (without guard)
4.0
0.2
1.85
0.12
0.15
1.1
3.4
NO
C
NC
0.12
1.5
0.5
7.4
0.2
0.15
2.8
8.7
0.1
1.25
0.15
15.4
19.8
5.2
0.3
0.2
6.4
Dimensions other than drawn above is same as self-standing PC board terminal.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV3,AVM3/AVT3,AVL3
1-(2) Solder terminal (with guard)
mm General tolerance: 0.25
NO
C
NC
8.0
24.0
Dimensions other than drawn above is same as guardless type.
1-(3) Solder terminal (with opposite side guard)
8.0
24.0
Dimensions other than drawn above is same as guardless type.
1-(4) Self-standing PC terminal
Pin plunger
PC board pattern
0.05
0.3
3-1.2
dia.
7.6
4.0
(
)
P.T.
0.6 max.
1.8
0.1
8.7
0.1
15.4
(
)
O.P.
0.3
7.7
0.2
(
)
6.7 8.4
O.P.
+0.1
-0.05
1.85
0.4
2.4
11.8
NO
0.12
C
NC
1.1
0.15
3.4
2.4
7.4
Pretravel, Max. mm
0.6
0.1
0.4
+0.1
2.4
dia.
-0.05
0.1
0.1
Movement differential, Max. mm
Overtravel, Min. mm
0.12
2.5
9.5
0.9
2.2
0.5
1.5
1.25 0.1
Distance from mounting
hole, mm
0.15
8.7
8.4 0.3
5.2
Operating
position
0.1
0.15
0.3
0.2
2.2
15.4
19.8
6.4
Distance from standoff,
mm
11.8 0.4
Short hinge lever
(
)
P.T.
4.0
0.4
12.85
5.0
2.5 max.
Pretravel, Max. mm
2.5
0.5
0.8
(
)
O.P.
Movement differential, Max. mm
Overtravel, Min. mm
0.8
8.8
(
)
O.P.
6.6
0.9
12.2
NO
C
NC
Distance from mounting
8.8 0.8
hole, mm
Operating
position
Distance from standoff,
mm
12.2 0.9
Hinge lever
(
)
P.T.
0.4
4.0
7.15
2.8 max.
Pretravel, Max. mm
2.8
0.8
1.2
(
)
O.P.
Movement differential, Max. mm
Overtravel, Min. mm
0.8
8.8
(
)
O.P.
0.9
12.2
NO
NC
Distance from mounting
C
8.8 0.8
hole, mm
Operating
position
Distance from standoff,
mm
12.2 0.9
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV3,AVM3/AVT3,AVL3
mm General tolerance: 0.25
Long hinge lever
(
)
P.T.
4.0
3.5 max.
0.4
13.1
Pretravel, Max. mm
3.5
1.0
1.6
Movement differential, Max. mm
Overtravel, Min. mm
(
)
O.P.
1.2
8.8
(
)
O.P.
1.3
12.2
NO
Distance from mounting
C
NC
8.8 1.2
hole, mm
Operating
position
Distance from standoff,
mm
12.2 1.3
Simulated roller lever
(
)
P.T.
0.4
4.0
6.3
2.8 max.
R2.5
Pretravel, Max. mm
2.8
0.8
1.2
Movement differential, Max. mm
Overtravel, Min. mm
(
)
O.P.
0.8
11.65
(
)
O.P.
0.9
15.05
Distance from mounting
hole, mm
11.65 0.8
15.05 0.9
NO
C
NC
Operating
position
Distance from standoff,
mm
Roller lever
3.2
(
)
P.T.
0.4
2.5 max.
5.15
5.0 dia.
Pretravel, Max. mm
2.5
0.5
0.8
(
)
O.P.
0.8
Movement differential, Max. mm
Overtravel, Min. mm
14.5
(
)
O.P.
0.9
17.9
Distance from mounting
hole, mm
NO
14.5 0.8
17.9 0.9
C
NC
Operating
position
Distance from standoff,
mm
1-(5) Internationally common pitch PC terminal
PC board pattern
(P.T.)
0.6max.
4.0
3-1.5 0.05 dia.
(O.P.)
8.4 0.3
(O.P.)
11.8 0.4
7.62 0.1 7.62 0.1
2.4
3.2
7.4
3.4 0.15
1.3
6-C0.3
(4.0)
0.5
7.62 0.1 7.62 0.1
19.8 0.3
1-(6) Right angle terminal
PC board pattern
(P.T.)
0.6max.
4.0
3-1.5 0.05 dia.
(O.P.)
8.4 0.3
7.62 0.1 7.62 0.1
2.4
5.08 0.2
3.4 0.15
R0.5
6.4
0.5
(2.8)
(4.0)
7.62 0.1 7.62 0.1
19.8 0.3
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV3,AVM3/AVT3,AVL3
1-(7) Left angle terminal
mm General tolerance: 0.25
PC board pattern
(P.T.)
0.6max.
4.0
3-1.5 0.05 dia.
(O.P.)
8.4 0.3
7.62 0.1 7.62 0.1
2.4
5.08 0.2
6.4
3.4 0.15
R0.5
0.5
(2.8)
(4.0)
7.62 0.1 7.62 0.1
19.8 0.3
1-(8) .110 Quick-connect terminal
4.0
NO
C
NC
0.15
3.4
0.15
7.1
11.0
0.1
5.5
0.1
2.5
0.1
6-C0.6
2.8
0.1
0.1
0.5
3-1.2 0.05 dia.
9.5
0.15
7.6
4.0-00.15
5.2
0.15
0.3
15.2
19.8
0.2
6.4
Dimensions other than drawn above is same as self-standing PC board terminal.
2.FS-T switches (Cross-line terminal type)
2-(1) PC board terminal
Pin plunger
PC board pattern
0.3
(
)
P.T.
7.6
4.0
0.6 max.
3-1.35 to 1.50 dia.
+0.1
-0.05
(
)
O.P.
2.4
10.9
0.3
7.7
3.3
8.4
6.7
(Button position)
8.8 0.1
2.4
NO
16.1 0.1
C
NC
3.2
7.0
+0.1
2.4
dia.
-0.05
0.1
2.5
Pretravel, Max. mm
0.6
0.1
0.4
0.5
0.1
1.2
0.1
9.5
Movement differential, Max. mm
Overtravel, Min. mm
0.2
6.4
8.8
16.1
19.8
Distance from mounting
hole, mm
8.4 0.3
Operating
position
0.3
Distance from standoff,
mm
11.7 0.4
Short hinge lever
0.4
(
)
P.T.
5.0
4.0
12.85
2.5 max.
Pretravel, Max. mm
2.5
0.5
0.8
(
)
O.P.
Movement differential, Max. mm
Overtravel, Min. mm
0.8
8.8
NO
C
NC
Distance from mounting
hole, mm
8.8 0.8
Operating
position
Distance from standoff,
mm
12.1 0.9
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV3,AVM3/AVT3,AVL3
mm General tolerance: 0.25
Hinge lever
0.4
(
)
P.T.
4.0
7.15
12.85
2.8 max.
Pretravel, Max. mm
2.8
0.8
1.2
(
)
O.P.
Movement differential, Max. mm
Overtravel, Min. mm
0.8
8.8
NO
Distance from mounting
C
NC
8.8 0.8
hole, mm
Operating
position
Distance from standoff,
mm
12.1 0.9
Long hinge lever
Simulated roller lever
Roller lever
(
)
P.T.
3.5 max.
0.4
4.0
13.1
Pretravel, Max. mm
3.5
1.0
1.6
(
)
O.P.
Movement differential, Max. mm
Overtravel, Min. mm
1.2
8.8
NO
C
NC
Distance from mounting
8.8 1.2
hole, mm
Operating
position
Distance from standoff,
mm
12.1 1.3
(
)
P.T.
4.0
0.4
2.8 max.
6.3
12.85
R2.5
Pretravel, Max. mm
2.8
0.8
1.2
(
)
O.P.
11.65
0.8
Movement differential, Max. mm
Overtravel, Min. mm
NO
C
NC
Distance from mounting
11.65 0.8
14.95 0.9
hole, mm
Operating
position
Distance from standoff,
mm
(
)
0.4
P.T.
3.2
5.15
2.5 max.
5.0 dia.
Pretravel, Max. mm
2.5
0.5
0.8
(
)
O.P.
0.8
14.5
Movement differential, Max. mm
Overtravel, Min. mm
NO
Distance from mounting
C
NC
14.5 0.8
17.8 0.9
hole, mm
Operating
position
Distance from standoff,
mm
2-(2) Solder terminal
(
)
P.T.
0.3
7.6
4.0
0.6 max.
(
)
O.P.
+0.1
-0.05
0.3
7.7
3.3
2.4
8.4
6.7
(
)
3.9
NO
C
NC
2.4
6.4
+0.1
2.4
dia.
-0.05
0.1
2.5
0.5
1.5
0.1
9.5
0.2
2.8
8.8
0.2
16.1
6.4
0.3
19.8
As for the dimensions of lever types, dimensions other than terminals are same as self-standing solder terminal.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV3,AVM3/AVT3,AVL3
2-(3) .110 Quick-connect terminal
mm General tolerance: 0.25
(
)
P.T.
0.3
4.0
7.6
0.6 max.
(
)
O.P.
+0.1
-0.05
0.3
2.4
7.7
6.7 8.4
NO
C
NC
2.4
3.3
+0.1
2.4
dia.
11.0
-0.05
0.1
5.5
0.15
7.1
0.1
2.5
1.2 0.05 dia.
0.1
0.5
2.8
0.1
9.5
8.8
0.2
6.4
16.1
0.3
19.8
As for the dimensions of lever types, dimensions other than terminals are same as self-standing solder terminal.
NOTES
1.Regarding fastening of switch body
In fastening the switch body, use flat
filister head M2.3 screws, with tightening
torque of not more than 0.29N·m.To
prevent loosening of the screws, it is
recommended that spring washers be
used with the screws and adhesive be
applied to lock the screws.
2.Soldering operation
6.Cautions regarding use
For manual soldering: 60W soldering
iron, soldering completed within 3
seconds; do not apply force to the
terminals.
For automatic soldering tank: 250°C
immersion, completed within 6 seconds,
350°C immersion, completed within 3
seconds.
Terminal portions must not be moved in
min.1 minute after soldering.Also no
tensile strength of lead wires should be
applied to terminals.
3.Regarding connector connections
(.110 quick connect terminals)
For making connections, a dedicated
receptacle for .110 quick connect
terminals should be used, and the
terminals should be inserted parallel to
the receptacle.Consideration should be
given to mounting so that no tensile load
is applied to the lead wires.
This subminiature switch has been
designed as a dedicated switch for AC
use, but it can be used for low capacity
DC circuits.
Please select gold-clad contact types
when loads are in the low-level area of
1mA up to 100mA and 5V up to 30V.
After mounting the switch and making
wiring connections, the insulation
distance between ground and each
terminal should be confirmed as
sufficient.
The positioning of the switch should be
such that the pushbutton or actuator for
the switch should not directly apply force
to the operating section in the free
condition.For a pushbutton, the force
from the pushbutton should be applied in
a perpendicular direction.
In setting the movement after operation,
the over-travel should be set not less
than 70% as a standard.Setting the
movement at less than 70% of O.T.may
cause troubles such as mis-contact and
welding due to small contact force of the
switch.
3 A
Ag
100 mA
Au (-61)
Triple layer contact type
1 mA
0
DC
AC
5
5
15
30V
30
250V
(Reference only)
For switching of inductive loads (relays,
solenoids, buzzers, etc.), in order to
prevent damage to contacts due to the
occurrence of arcing, an arc absorbing
circuit should be applied
4.In making the switch selection
Consideration should be given to provide
for no interference up to +20% variation
of the standard characteristics values.
5.Environment
7.Quality check under Actual Loading
Condition
To assure reliability, check the switch
under actual loading conditions.Avoid any
situation that may adversely affect
switching performance.
8.When using lever type switch, care
should be taken not to apply undue
force on the body from the opposite
side or side ways to its operating
direction.
Locations where corrosive gases having
a bad influence on contacts are present,
and locations where there is an
excessive amount of siliceous or other
abrasive dust should be avoided.
N.C.
side
Stroke
Contact
force
0
70% of O.T.
N.O.
side
specified value
Usable
area
O.T. spedified
value
P.T.
O.T. max.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|