Panasonic Network Card 2SB1218G User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Transistors  
2SB1218G  
Silicon PNP epitaxial planar type  
For general amplification  
Complementary to 2SD1819G  
Features  
Package  
Code  
SMini3-F2  
Marking Symbol: B  
Pin Name  
1. Base  
High forward current transfer ratio hFE  
S-Mini type package, allowing downsizing of the equipment and  
automatic insertion through the tape packing and the magazine  
packing.  
2. Emitter  
3. Collector  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Symbol  
Rating  
45  
Unit  
V
Collector-base voltage (Emitter open) VCBO  
Collector-emitter voltage (Base open) VCEO  
Emitter-base voltage (Collector open) VEBO  
45  
V
7  
V
Collector current  
IC  
ICP  
PC  
Tj  
100  
200  
150  
mA  
mA  
mW  
°C  
Peak collector current  
Collector power dissipation  
Junction temperature  
Storage temperature  
150  
Tstg  
55 to +150  
°C  
Electrical Characteristics Ta = 25°C 3°C  
Parameter  
Symbol  
VCBO  
VCEO  
VEBO  
ICBO  
Conditions  
Min  
45  
45  
7  
Typ  
Max  
Unit  
V
Collector-base voltage (Emitter open)  
Collector-emitter voltage (Base open)  
Emitter-base voltage (Collector open)  
Collector-base cutoff current (Emitter open)  
Collector-emitter cutoff current (Base open)  
Forward current transfer ratio *  
Collector-emitter saturation voltage  
Transition frequency  
IC = −10 µA, IE = 0  
IC = −2 mA, IB = 0  
V
IE = −10 µA, IC = 0  
VCB = −20 V, IE = 0  
VCE = −10 V, IB = 0  
VCE = −10 V, IC = −2 mA  
V
0.1  
100  
460  
µA  
µA  
ICEO  
hFE  
160  
VCE(sat) IC = −100 mA, IB = −10 mA  
0.3 0.5  
V
fT  
VCB = −10 V, IE = 1 mA, f = 200 MHz  
VCB = −10 V, IE = 0, f = 1 MHz  
80  
MHz  
pF  
Collector output capacitance  
Cob  
2.7  
(Common base, input open circuited)  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.  
2. : Rank classification  
*
Rank  
Q
R
210 to 340  
BR  
S
290 to 460  
BS  
No-rank  
160 to 460  
B
hFE  
160 to 260  
BQ  
Marking symbol  
Product of no-rank is not classified and have no marking symbol for rank.  
Publication date: April 2007  
SJC00352AED  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
This product complies with the RoHS Directive (EU 2002/95/EC).  
2SB1218G  
NF IE  
NF IE  
h Parameter IE  
6
5
4
3
2
1
20  
VCB = −5 V  
VCE = −5 V  
f = 270 Hz  
Ta = 25°C  
VCB = −5 V  
Rg = 50 kΩ  
f = 1 kHz  
Ta = 25°C  
Rg = 2 kΩ  
Ta = 25°C  
hfe  
16  
12  
8
100  
10  
1
hoe (µS)  
f = 100 Hz  
1 kHz  
10 kHz  
hie (k)  
4
hre (× 104  
)
0
0.01  
0
0.1  
0.1  
1
10  
1
10  
0.1  
1
10  
(
)
Emitter current IE mA  
(
)
(
)
Emitter current IE mA  
Emitter current IE mA  
h Parameter VCE  
hfe  
100  
hoe (µS)  
10  
hre (× 104  
)
hie (k) IE = 2 mA  
f = 270 Hz  
Ta = 25°C  
1
1  
10  
100  
(
)
V
Collector-emitter voltage VCE  
SJC00352AED  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
This product complies with the RoHS Directive (EU 2002/95/EC).  
SMini3-F2  
Unit: mm  
2.00 0.20  
0.30 +00..0025  
3
1
2
0.13 +00..0025  
(0.65)  
(0.65)  
1.30 0.10  
(5°)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Minolta Webcam Riva Zoom 135EX User Manual
Mr Coffee Ice Tea Maker TM4 User Manual
Murray Lawn Mower 425016x48A User Manual
NEC Telephone Xen User Manual
Nilfisk ALTO Clothes Dryer 743 L User Manual
NordicTrack Treadmill NTL198063 User Manual
Nortel Networks Server NN43001 121 User Manual
Panasonic CD Player CQ DFX202N User Manual
Panasonic Computer Hardware AW PB302 User Manual
Panasonic Portable DVD Player CQVX100U User Manual