High Speed Laser Fax
Operating Instructions
Model No.
KX-FL503HK
Please read these Operating Instructions before using the unit and save for
future reference.
PFQX1509ZA
WM0101EN0
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions
Important safety instructions!
When using this unit, basic safety precautions
should always be followed to reduce the risk of
fire, electric shock, or personal injury.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked
on this unit.
3. Unplug this unit from power outlets before
cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this unit near water, for example
near a bathtub, wash bowl, kitchen sink, or
the like.
11. Never push any objects through slots in this
unit. This may result in the risk of fire or
electric shock. Never spill any liquid on the
unit.
12. To reduce the risk of electric shock, do not
disassemble this unit. Take the unit to an
authorized service center when service is
required. Opening or removing covers may
expose you to dangerous voltages or other
risks. Incorrect reassembly can cause
electric shock when the unit is subsequently
used.
5. Place the unit securely on a stable surface.
Serious damage and/or injury may result if
the unit falls.
6. Do not cover slots and openings on the
unit. They are provided for ventilation and
protection against overheating. Never place
the unit near radiators, or in a place where
proper ventilation is not provided.
13. Unplug this unit from the wall outlet and
refer servicing to an authorized service
center when the following conditions occur:
A. When the power supply cord or plug is
damaged or frayed.
B. If liquid has been spilled into the unit.
C. If the unit has been exposed to rain or
water.
7. Use only the power source marked on the
unit. If you are not sure of the type of power
supplied to your home, consult your dealer
or local power company.
8. For safety purposes this unit is equipped
with a grounded plug. If you do not have
this type of outlet, please have one
installed. Do not use any type of adaptor
plug to defeat this safety feature.
9. Do not place objects on the power cord.
Install the unit where no one can step or
trip on the cord.
10. Do not overload wall outlets and extension
cords. This can result in the risk of fire or
electric shock.
D. If the unit does not work normally by
following the operating instructions.
Adjust only controls covered by the
operating instructions. Improper
adjustment may require extensive work
by an authorized service center.
E. If the unit has been dropped or
physically damaged.
F. If the unit exhibits a distinct change in
performance.
14. During thunderstorms, avoid using
telephones except cordless types. There
may be a remote risk of an electric shock
from lightning.
15. Do not use this unit to report a gas leak,
when in the vicinity of the leak.
SAVE THESE INSTRUCTIONS
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions
CAUTION:
Toner cartridge
Laser radiation
●
●
Be careful of the following when you handle
The printer of this unit utilizes a laser. Use
the toner cartridge.
of controls or adjustments or performance
of procedures other than those specified
herein may result in hazardous radiation
exposure.
—If you ingest any toner, drink several
glasses of water to dilute your stomach
contents, and seek immediate medical
treatment.
—If any toner comes into contact with your
eyes, flush them thoroughly with water,
and seek medical treatment.
—If any toner comes into contact with your
skin, wash the area thoroughly with soap
and water.
Drum unit
●
Read the instructions on pages 12 and 13
before you begin installation of the drum
unit. After you have read them, open the
drum unit protection bag. The drum unit
contains a photosensitive drum. Exposing it
to light may damage the drum.
Once you have opened the protection bag:
—Do not expose the drum unit to light for
more than 5 minutes.
—Do not touch or scratch the green drum
surface.
—Do not place the drum unit near dust or
dirt, or in a high humidity area.
—Do not expose the drum unit to direct
sunlight.
Fuser unit
Fuser unit
●
The fuser unit gets hot. Do not touch it.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions
CAUTION:
OTHER INFORMATION:
●
Installation
Keep the unit away from electrical noise
●
Never install telephone wiring during a
generating devices, such as fluorescent
lamps and motors.
lightning storm.
●
●
Never install telephone jacks in wet
The unit should be kept free from dust, high
locations unless the jack is specifically
designed for wet locations.
temperature and vibration.
●
The unit should not be exposed to direct
●
Never touch uninsulated telephone wires or
sunlight.
terminals unless the telephone line has
been disconnected at the network interface.
●
Do not place heavy objects on top of this
unit.
●
Use caution when installing or modifying
●
Do not touch the plug with wet hands.
telephone lines.
WARNING:
●
To prevent the risk of fire or electrical
shock, do not expose this product to rain or
any type of moisture.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Initial Preparation
Accessories
Included accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Accessory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Help Button
Help function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Finding the
Controls
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setup
Toner cartridge and drum unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Paper tray, document stacker and paper stacker . . . . . . . . . . . . . . . 14
Recording paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Date and time, your logo and facsimile telephone number. . . . . . . . . 17
Volumes
Adjusting volumes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Telephone
Automatic
Dialing
Storing names and telephone numbers in ONE-TOUCH DIAL. . . . . 22
Storing names and telephone numbers in EASY DIAL. . . . . . . . . . . 23
Editing and erasing a stored name and number . . . . . . . . . . . . . . . . 24
Making a voice call using ONE-TOUCH DIAL and EASY DIAL . . . . 26
Caller ID
Caller ID service from your phone company . . . . . . . . . . . . . . . . . . 27
Viewing and calling back using caller information . . . . . . . . . . . . . . 28
Confirming caller information using the Caller ID list . . . . . . . . . . . . 29
Storing caller information in ONE-TOUCH DIAL and EASY DIAL. . . 30
Voice Contact Talking to the other party after fax transmission or reception . . . . . . 31
Fax
Sending Faxes Sending a fax manually. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Sending a fax using ONE-TOUCH DIAL and EASY DIAL . . . . . . . . 33
Documents you can send . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Reports for confirmation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Broadcast transmission. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Receiving
Faxes
Setting the unit to receive faxes . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
TEL mode (answering all calls manually). . . . . . . . . . . . . . . . . . . . . 42
FAX ONLY mode (all calls are received as faxes) . . . . . . . . . . . . . . 43
Using the unit with an answering machine . . . . . . . . . . . . . . . . . . . . 44
TEL/FAX mode (receiving voice calls with rings and fax calls
without rings when you are near the unit) . . . . . . . . . . . . . . . . . . 46
Using with an answering machine and computer. . . . . . . . . . . . . . . 48
Extension telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Turning the AUTO ANSWER mode on remotely . . . . . . . . . . . . . . . 49
Receive polling (retrieving a fax placed on another fax machine). . . 49
Black list function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Pager call - when the unit receives a fax. . . . . . . . . . . . . . . . . . . . . 51
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy
Copying
Making a copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Convenient way to make a copy . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Programmable Features
Features
Summary
Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Basic features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Advanced features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Help
Error Messages Reports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Operations
Jams
When a function does not work, check here before
requesting help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
If a power failure occurs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Document jams - sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Recording paper jam. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
No feeding or multiple feeding occurs while sending . . . . . . . . . . . . 71
Cleaning
Cleaning the inside of the unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Replacing the toner cartridge and the drum unit . . . . . . . . . . . . . . . 74
Replacement
General Information
Printed Reports Reference lists and reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Specifications Technical data about this product . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Index
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Included accessories!
Power cord..............1 Telephone line cord...1 Handset...................1 Handset cord...........1
Document stacker...1 Paper tray ...............1 Operating instructions...1
Paper stacker..........1
Toner cartridge.........1
Drum unit.................1
Quick Start Sheet ....1
(complementary test starter cartridge)
This cartridge can print approx.
800 sheets of A4 size paper
with a 5% image area. Refer to
image area on page 79. Please
purchase a replacement toner
cartridge Model No. KX-FA76A
for continuous use of your unit.
●
If any item is missing or damaged, check with the place of purchase.
●
Save the original carton and packing materials for future shipping and transportation of the unit.
Accessory information!
Model No.
KX-FA76A
KX-FA77A
Item
Usage
Specifications
See page 79.
See page 79.
Toner cartridge
Drum unit
For replacement. See page 74.
For replacement. See page 74.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Help Button
Help function!
You can print a quick reference for assistance as follows.
HELP
Press
.
HELP
Display
1
2
ROTATE
& SET
Display:
Rotate
until the desired item is
EASY DIAL
displayed.
1. How to set the date, time, your logo and
fax number.
QUICK SET UP
2. How to program the features.
EASY DIAL
SET
FEATURE LIST
3. How to store names in the EASY DIAL
directory and how to dial them.
EASY DIAL
4. Help with problems receiving faxes.
FAX RECEIVING
5. How to use the copier function.
COPIER
6. List of available reports.
REPORTS
7. How to use the Caller ID service.
CALLER ID
Press
.
SET
3
PRINTING
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding the Controls
Overview!
Document guides
Handset
To make or answer calls.
●
Paper tray
Speaker
(Left side of the unit)
Recording paper entrance
Front cover
Document entrance
Document stacker
Front cover open button
Document exit
Recording paper exit
Paper stacker
Paper stacker extender
*The document stacker and
paper stacker may not be
shown in all illustrations.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding the Controls
Location!
●
To store a scanned document into
memory, and then send it (p. 32).
●
To turn on/off AUTO ANSWER (p. 40, 41).
●
●
To make a collated copy (p. 53).
To adjust volumes (p. 21).
●
To select an enlargement or
reduction rate in copy mode
●
To use ONE-TOUCH DIAL (p. 22, 26, 33).
To transmit to multiple stations (p. 36, 39).
●
(p. 53)
.
●
To print a quick reference (p. 9).
●
To select a resolution
(p. 32, 52).
Display
Dial keypad
QUICK SCAN START
MANUAL BROAD
NAME/TEL NO.
SEARCH
●
To initiate fax
●
To dial without
lifting the handset.
transmission
or reception.
To store a
setting during
programming.
●
To use
●
To initiate
or exit
caller ID
service
(p. 28–30).
●
●
To access special
programming.
telephone services
such as call waiting
or transferring an
extension call.
●
To store or edit names
and telephone numbers
(p. 22–25).
●
To initiate copying
(p. 52).
●
To mute your voice to the
other party during
conversation.
Press this button again to
resume conversation.
●
To search for a stored name
(p. 26, 33).
To select the features or
feature settings during
programming (p. 54).
●
To stop an operation or
cancel programming.
●
●
To select stations 6–10 for
ONE-TOUCH DIAL
(p. 22, 26, 33).
●
To redial the last number
dialed.*
To insert a pause during
dialing.
●
●
To confirm a stored
telephone number (p. 26).
●
To change from pulse to tone temporarily
during dialing when your line has rotary
pulse services.
*If the line is busy when you make a voice call using the
automatically redial the number up to 9 times.
button, the unit will
MONITOR
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Toner cartridge and drum unit!
Caution:
●
Read the instructions below before you begin installation. After you have read them,
open the drum unit protection bag. The drum unit contains a photosensitive drum.
Exposing it to light may damage the drum. Once you have opened the protection bag:
—Do not expose the drum unit to light for more than 5 minutes.
—Do not touch or scratch the green drum surface.
—Do not place the drum unit near dust or dirt, or in a high humidity area.
—Do not expose the drum unit to direct sunlight.
Remove the toner cartridge and drum
unit from the protection bags.
Peel off the seal from the toner
Protection bar
2
1
Seal
1
2
cartridge (
).
1
Remove the protection bar from the
drum unit ( ).
2
Toner cartridge
Hold here.
Drum unit
With Panasonic face up on the toner
cartridge, match the red arrows on
the cartridge and the drum unit.
Toner
cartridge
Red arrows
Drum unit
Green drum
surface
Slide the tab of the toner cartridge
into the slot of the drum unit.
Tab
Slot
3
4
Hold right side of the toner cartridge
under the lip on the drum unit and...
a
turn the two levers on the toner
cartridge with firm pressure.
4b
Levers
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
The toner cartridge is installed when
the triangles match.
5
6
Triangles
Tap on the toner cartridge several
times to allow the toner to fall into
the drum unit. Grab the tabs, and
shake the drum and toner unit
horizontally several times.
Toner cartridge
Tabs
Push the front cover open button
then open the front cover.
Front cover
7
8
Front cover
open button
Install the drum and toner unit by
holding the tabs.
Drum and toner unit
●
If the lower glass is dirty, clean it with
a soft dry cloth.
Lower glass
Close the front cover, until locked, by
pushing down on both sides.
Front cover
9
Toner save feature
●
If you want to save on toner consumption, set the toner save setting to on (feature #79 on page 61). The
toner cartridge will last approx. 40% longer. This feature may reduce print quality.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Paper tray, document stacker and
paper stacker!
Paper tray
Insert the paper tray into the two slots on the
Paper tray
back of the unit ( ).
1
Let it lean back until it clicks into place ( ).
2
2
1
Document stacker
Align with the ribs on the document exit ( ).
1
2
Pull the document stacker forward gently until
it clicks into place (
).
2
Document exit
Document
stacker
1
Ribs
Paper stacker
Line up the slots in the paper stacker with the
pegs on the bottom of the unit, then slide until
locked.
Pegs
Open the paper stacker extender.
●
The paper stacker can hold approx. 100
Paper stacker
sheets of printed paper. Remove the printed
paper before they are filled on the paper
stacker.
Slots
Paper stacker extender
Note for installation:
●
Do not place the unit in an area where the paper tray may be obstructed by a wall, etc.
●
Document and recording paper will be ejected from the front of the unit. Do not place anything in front of
the unit.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Recording paper!
A4 size recording paper can be loaded. The unit can hold up to 150 sheets of 60 g/m2 to 75 g/m2
(16 lb. to 20 lb.) paper or 120 sheets of 90 g/m2 (24 lb.) paper.
Fan the stack of paper to prevent a paper
1
2
jam.
Printing side
is back.
Insert the paper into the recording paper
entrance.
●
The paper should not be over the tab.
Recording
paper
entrance
●
If the paper is not inserted correctly,
readjust the paper, or the paper may jam.
Correct
Incorrect
Stack of
paper
Tab
Note for recording paper:
●
Avoid using paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or
paper used for resumes.
●
●
●
Do not use different types or thicknesses of paper at the same time. This may cause a paper jam.
Avoid extremely smooth or shiny paper that is highly textured.
Avoid paper that is coated, damaged or wrinkled.
Note:
●
Avoid double-sided printing.
●
Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the
paper may jam.
●
Some paper only accepts print on one side. Try using the other side of paper if you are not happy with the
print quality.
Adding paper
1. Remove all of the installed paper.
2. Add paper to the removed paper and straighten.
3. Fan the stack of paper.
4. Insert the paper into the recording paper entrance.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Connections!
Connect the handset cord.
1
Connect the telephone line cord.
2
Connect the power cord.
●
3
When the power is turned on for
the first time, the unit will print
some basic information.
Power cord
To a power outlet
(220–240 V, 50/60 Hz)
Connect to “LINE”.
Handset cord
To a single telephone
line jack
Telephone
line cord
Caution:
●
When you operate this product, the power outlet should be near the product and easily accessible.
Note:
●
If you want to connect an answering machine to the unit, see page 44.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Date and time, your logo and facsimile
telephone number!
You should program the date and time, your logo and facsimile telephone number. This
information will be printed on each page transmitted from your unit.
Your logo Your facsimile telephone number Date and time
Example:
FROM : Panasonic Fax
FAX NO. : 1234567
Feb. 26 2001 09:02AM P1
Fax Correspondence
Setting the date and time
MENU
Press
.
Press SET
.
1
2
3
7
8
Display: SYSTEM SET UP
SETUP ITEM [ ]
MENU
Press
, then 0 1 .
Press
.
SET DATE & TIME
Display
MENU
/
Press SET
.
Example: M:01/D:01/Y:01
Cursor
Enter the correct month/day/year by selecting
2 digits for each, using the dial keypad.
Example: Aug. 10, 2001
4
Press
.
0 8 1 0 0 1
M:08/D:10/Y:01
EASY DIAL
SET
STOP
Press SET
.
5
6
Example: TIME: 12:00AM
Enter the correct hour/minute by selecting
2 digits for each, using the dial keypad.
to select “AM” or “PM”.
Example: 3:15PM
Note:
●
You can enter the number by rotating
in steps 4 and 6. In this case,
Press
EASY DIAL
press to move the cursor.
●
1. Press
.
0 3 1 5
The accuracy of the clock is approximately
±60 seconds a month.
TIME: 03:15AM
To correct a mistake
2. Press
until “PM” is displayed.
●
Press
or
to move the cursor to the
TIME: 03:15PM
incorrect number, and make the correction.
If you press STOP while programming, the
display will return to the previous one.
●
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Setting your logo
The logo can be your company, division or name.
Display
MENU
/
MENU
Press
Press
Press
.
1
2
3
4
Display: SYSTEM SET UP
, then 0 2 .
YOUR LOGO
.
SET
LOGO=
EASY DIAL
FLASH
(Hyphen)
SET
Enter your logo, up to 30 characters, using
the dial keypad. See the next page for details.
STOP
(Delete)
HANDSET MUTE
(Insert)
Example: “Bill”
2
1. Press
twice.
LOGO=B
To change capital or lower case letters
Cursor
Pressing the
key will change to capital or
4
5
2. Press
3. Press
4. Press
six times.
LOGO=Bi
lower case alternatively.
1. Press
2. Press
3. Press
4. Press
twice.
2
4
six times.
LOGO=Bil
LOGO=B
Display:
three times.
LOGO=BI
to move the cursor to the next
.
5
space and press
six times.
LOGO=Bi
LOGO=Bill
three times.
5
Press
Press
.
SET
LOGO=Bil
5
6
SETUP ITEM [ ]
MENU
.
Note:
●
You can enter your logo by rotating
EASY DIAL
(see the next page).
To correct a mistake
To insert a character
●
Press
or
to move the cursor to the
1. Press
or
to move the cursor to the
incorrect character, and make the correction.
position to the right of where you want to insert
the character.
To delete a character
2. Press
(Insert) to insert a
HANDSET MUTE
space and enter the character.
●
Move the cursor to the character you want to
delete and press STOP
.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
To select characters with the dial keypad
Pressing the dial keys will select a character as shown below.
Keys
Characters
1
A
D
G
J
[
]
{
a
d
g
j
}
b
e
h
k
+
c
f
–
2
3
4
5
6
r
/
=
,
.
_
`
:
;
?
|
1
2
3
4
5
6
7
8
9
0
B
E
H
K
N
Q
U
X
(
C
F
I
i
L
O
R
V
Y
)
l
M
P
T
m
S
t
n
p
u
w
o
q
v
x
!
s
7
8
y
"
W
0
Z
z
9
$
#
%
&
¥
@
^
’
→
To change capital or lower case letter.
Hyphen button (To insert a hyphen.)
FLASH
Insert button (To insert one character or one space.)
HANDSET MUTE
STOP
Delete button (To delete a character.)
key (To move the cursor to the right.)
To enter another character using the same number key, move the cursor to the next space.
key (To move the cursor to the left.)
To select characters using EASY DIAL
Instead of pressing the dial keys, you can select characters using EASY DIAL.
1. Rotate
until the desired character is
EASY DIAL
displayed.
2. Press
to move the cursor to the next space.
●
The character displayed in step 1 is inserted.
3. Return to step 1 to enter the next character.
Display order of characters
Capital
alphabet
EASY DIAL
: Rotating to
the right
Lower case
alphabet
Number
: Rotating to
the left
Symbol
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Setting your facsimile telephone number
MENU
Press
Press
Press
.
1
2
3
4
Display
MENU
/
Display: SYSTEM SET UP
, then 0 3 .
YOUR FAX NO.
.
SET
NO.=
Enter your facsimile telephone number, up to
20 digits, using the dial keypad.
EASY DIAL
FLASH
SET
(Hyphen)
STOP
(Delete)
Example: NO.=1234567
Press
Press
.
SET
5
6
SETUP ITEM [ ]
MENU
.
Note:
●
You can enter your facsimile telephone number by
rotating EASY DIAL . If you use EASY DIAL , press
to move the cursor.
●
●
The
button replaces the digit with a “+” and the
button replaces it with a space.
Example (using the dial keypad): +234 5678
Press
2 3 4 5 6 7 8 .
To enter a hyphen in a telephone number, press
FLASH (Hyphen).
To correct a mistake
To delete a number
●
●
Press
or
to move the cursor to the
Move the cursor to the number you want to
delete and press STOP
incorrect number, and make the correction.
.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Volumes
Adjusting volumes!
Ringer volume
4 levels (high/middle/low/off) are available.
Display
/
While the unit is idle, press
or
.
●
If any documents are in the document entrance,
you cannot adjust the ringer volume. Confirm that
there are no documents in the entrance.
■
To turn the ringer off:
1. Press repeatedly until the following
message is displayed.
RINGER OFF= OK?
Display:
SET
YES:SET/NO:STOP
2. Press
.
SET
Melody ringer
●
●
To turn the ringer back on, press
.
You can select one of the four melodies
instead of the bell. Change the setting (feature
#17 on page 56). The melody you selected
will sound when the unit receives a call.
■
While the ringer volume is set to off:
The display will show the following message.
RINGER OFF
When a call is received, the unit will not ring and
will display the following.
INCOMING CALL
Handset receiver volume
5 levels (high to low) are available.
While using the handset, press
or
.
Monitor volume
8 levels (high to low) are available.
While using the monitor, press
or
.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Dialing
Storing names and telephone numbers
in ONE-TOUCH DIAL!
For rapid access to frequently dialed numbers, the unit provides 10 stations of ONE-TOUCH
DIAL keys.
●
ONE-TOUCH DIAL 1 to 3 can be alternatively used as broadcast keys (p. 36).
ONE-TOUCH
DIAL
DIRECTORY PROGRAM
Press
.
Display
/
1
2
PRESS STATION
Display:
OR USE EASYDIAL
For ONE-TOUCH DIAL 1–3:
Press one of the ONE-TOUCH DIAL keys.
DIAL MODE
Press
to go to the next prompt.
SET
FLASH
(Hyphen)
DIRECTORY PROGRAM
For ONE-TOUCH DIAL 4–5:
Press one of the ONE-TOUCH DIAL keys.
LOWER
SET
For ONE-TOUCH DIAL 6–10:
Press LOWER , then press one of the ONE-
TOUCH DIAL keys.
STOP
(Delete)
Enter the name, up to 10 characters (see
page 19 for instructions).
Helpful hint:
3
●
You can confirm the stored items on the
display (p. 26) or on the telephone number list
(p. 77).
Example: NAME=John
Press
.
SET
Note:
4
5
Example: <S02>=
●
A hyphen or a space entered in a telephone
number counts as two digits.
Enter the telephone number, up to 30 digits,
using the dial keypad.
To correct a mistake
Example: <S02>=1114497
●
Press
or
to move the cursor to the
incorrect character/number, and make the
correction.
●
If you want to enter a hyphen, press
FLASH
.
To delete a character/number
Press
.
SET
●
Move the cursor to the character/number you
6
REGISTERED
PRESS STATION
OR USE EASYDIAL
want to delete, and press STOP
.
To print the one-touch label card with
stored names
Press
in step 7.
DIRECTORY PROGRAM
PRINT LABEL OK?
Display:
●
To program other stations, repeat steps 2 to 6.
YES:SET/NO:STOP
STOP
Press
to exit the program.
●If you press DIRECTORY PROGRAM
instead of , you can print the one-
7
Press
●
to start printing.
Put the card in the ONE-TOUCH DIAL
location.
SET
STOP
touch label card (see right).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Dialing
Storing names and telephone numbers
in EASY DIAL!
For rapid access to frequently dialed numbers, the unit provides a EASY DIAL directory (100
stations).
DIRECTORY PROGRAM
Display
Press
.
/
1
PRESS STATION
Display:
OR USE EASYDIAL
Rotate
until the following is
EASY DIAL
2
3
displayed.
NAME=
Enter the name, up to 10 characters (see
page 19 for instructions).
FLASH
(Hyphen)
EASY DIAL
SET
NAME=Alice
Example:
DIRECTORY PROGRAM
Press
.
SET
STOP
4
5
(Delete)
NO.=
Helpful hint:
●
Enter the telephone number, up to 30 digits,
using the dial keypad.
You can confirm the stored items on the
display (p. 26) or on the telephone number list
(p. 77).
NO.=5552233
Example:
If you want to enter a hyphen, press
Note:
●
●
FLASH
.
When the following message is displayed in
step 6, you can store only 5 more items.
Press
.
SET
6
7
SPACE= 5 DIRS.
Display:
REGISTERED
NAME=
●
●
If there is no space to store new stations, the
following message is displayed in step 1.
EASY DIAL FULL
●
To program other items, repeat steps 3 to 6.
Erase unnecessary stations (p. 25).
DIRECTORY PROGRAM
Press
program.
to exit the
A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
To delete a character/number
●
●
Press
or
to move the cursor to the
Move the cursor to the character/number you
incorrect character/number, and make the
correction.
want to delete, and press STOP
.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Dialing
Editing and erasing a stored name and number!
Editing a stored name and number
You can edit a name or number stored in ONE-TOUCH DIAL and EASY DIAL.
Rotate
EASY DIAL
is displayed.
until the desired name
Display
1
Mary
<S01>
Example:
means the station number
for ONE-TOUCH DIAL
DIRECTORY PROGRAM
Press
.
2
3
EDIT= DELETE=#
Press
to select “EDIT”.
NAME=Mary
EASY DIAL
DIRECTORY PROGRAM
SET
●
If you do not need to edit the name, skip to
step 5.
Edit the name (see page 19 for instructions).
4
5
Press
.
SET
=0123456
Example: <S01>
●
If you do not need to edit the telephone
number, skip to step 7.
Edit the telephone number. For further
details, see page 23.
6
7
Press
.
SET
REGISTERED
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Dialing
Erasing a stored station and item
You can erase ONE-TOUCH DIAL station and EASY DIAL item.
Display
Rotate
EASY DIAL
is displayed.
until the desired name
1
Mary
<S01>
Example:
DIRECTORY PROGRAM
Press
Press
.
2
3
EDIT= DELETE=#
to select “DELETE”.
DELETE OK?
SET
STOP
EASY DIAL
DIRECTORY PROGRAM
YES:SET/NO:STOP
●
STOP
To cancel erasing, press
.
Press
.
SET
4
DELETED
●
The stored name and number are deleted.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Dialing
Making a voice call using ONE-TOUCH DIAL
and EASY DIAL!
Before using this feature, program the desired names and telephone numbers into ONE-TOUCH
DIAL and EASY DIAL (p. 22, 23).
Using ONE-TOUCH DIAL
Display
MONITOR
Press
or lift the handset.
Handset
1
TEL=
Display:
●
Confirm that there are no documents in the
document entrance.
For ONE-TOUCH DIAL 1–5:
2
Press the desired ONE-TOUCH DIAL key.
For ONE-TOUCH DIAL 6–10:
Press LOWER , then press the desired
ONE-TOUCH DIAL key.
EASY DIAL
LOWER
ONE-TOUCH
DIAL
STOP
Example: TEL=<John>
NAME/TEL NO.
MONITOR
●
The unit will start dialing automatically.
Using EASY DIAL
Rotate
EASY DIAL
is displayed.
until the desired name
1
Lisa
Example:
To search for a name by initial
●
If the desired name has not been stored,
Example: “Lisa”
press
and dial the number
STOP
manually.
1. Rotate
until any name is
EASY DIAL
displayed.
MONITOR
The unit will start dialing automatically.
Press
●
or lift the handset.
Alan
Example:
2
2. Press 5 repeatedly until any name with
the initial “L” is displayed (see the character
table on page 19).
To confirm the stored telephone number on
the display
Larry
1. Rotate
until the desired name is
3. Rotate EASY DIAL to the right until “Lisa”
EASY DIAL
displayed.
is displayed.
John
<S06>
Example:
Lisa
means the station number
for ONE-TOUCH DIAL
●
●
To stop the search, press STOP
.
To make a call, press MONITOR or lift
the handset.
2. Press
.
NAME/TEL NO.
1114497
<S06>
●
To stop the confirmation, press STOP
.
Note:
●
To make a call, press MONITOR or lift the
handset.
●
When you want to search for symbols (not
letters or numbers), press in step 2.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
Caller ID service from your phone company!
This unit is compatible with the Caller ID service offered by your local telephone
company. To use this feature, you must subscribe to the Caller ID service.
Set the following ring count settings to 2 or more rings beforehand.
—FAX ring count (feature #06 on page 55)
—TEL/FAX ring count (feature #78 on page 61)
How Caller ID is displayed
The calling party’s name or telephone number will
be displayed after the first ring.
You then have the option of whether or not to
Display
answer the call depending on the caller.
Example:
Chris Horner
The unit will automatically store the caller
information (name, telephone number and the time
of the call). You can view the caller information
(p. 28) and print the caller ID list (p. 29).
Note:
●
If the unit is connected to a PBX (Private Branch Exchange) system, you may not receive the caller
information. Consult your PBX supplier.
●
If the unit cannot receive caller information, the unit will show the following.
The caller dialed from an area which does not provide Caller ID service.
The caller requested not to send caller information.
The caller made a long distance call.
OUT OF AREA
PRIVATE CALLER
LONG DISTANCE
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
Viewing and calling back using caller
information!
You can easily view caller information and call back.
Important:
●
Calling back will not be available in the following cases.
—The telephone number includes data other than numbers (i.e.
—The caller information does not include a telephone number.
or #).
Press
.
CALLER ID SEARCH
Handset
Display
1
2
3
Example (2 new calls are received):
Example:
Display:
2 NEW CALLS
USE EASY DIAL
Rotate
to the right (clockwise).
EASY DIAL
●
The display will show the most recent
caller’s number.
●
If you rotate to the left, the display will show
MONITOR
the reviewed calls.
●
STOP
To stop viewing, press
.
FAX START
STOP
EASY DIAL
CALLER ID SEARCH
NAME/TEL NO.
Press MONITOR or lift the handset to
make a call.
●
The unit will start dialing automatically.
●
To send a fax – insert the document FACE
DOWN and press FAX START
.
To display the caller’s telephone number and the date/time of the call
Press
repeatedly in step 2.
NAME/TEL NO.
Example:
WENDY ROBERTS
13456789012
Mar. 14 10:30AM
Display while viewing
When the unit could not receive a name.
After the last new call has been displayed.
After all calls have been displayed.
When no calls have been received.
NO NAME RCVD
END OF NEW CALL
END
NO CALLER DATA
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
Confirming caller information using the Caller ID
list
!
The unit will store the 30 most recent caller information.
—To print manually, see below.
—To print automatically after every 30 new calls, activate feature #26 (p. 57).
Sample of a Caller ID list
CALLER ID LIST
Mar. 20 2001 09:19AM
YOUR LOGO
:
YOUR FAX NO. :
NO. NAME
TELEPHONE NUMBER
TIME OF CALL
ANSWER
STATUS
01 WENDY ROBERTS
02 ALLAN STONE
03 MIKE TIMAR
3456789012
4567890123
9876543210
FAX
FAX
TEL
!
*
Mar.14 10:30AM
Mar.13 08:35AM
Mar.11 09:35AM
Printing and erasing the Caller ID list
!
Display
MENU
Press
to start printing.
CALLER ID PRINT
1
PRINTING
Display:
●
The display will show the following after
printing.
ERASE ALL OK?
YES:SET/NO:STOP
STOP
Press
to exit the program, or press
CALLER ID PRINT
STOP
SET
2
SET to erase all of the stored caller
information.
To erase caller information without printing
1. Press
three times.
MENU
CALLER SET UP
Display:
2. Press
3. Press
●
.
.
SET
SET
CALL LIST ERASE
ERASE ALL OK?
To cancel erasing, press
, then
STOP
.
MENU
4. Press
.
SET
ERASE COMPLETED
to exit the program.
5. Press
STOP
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
Storing caller information in ONE-TOUCH
DIAL and EASY DIAL!
Important:
●
This feature is not available in the following cases.
—The telephone number includes data other than numbers (i.e.
—The caller information does not include a telephone number.
or #).
For EASY DIAL:
Press
.
CALLER ID SEARCH
1
Rotate
.
EASY DIAL
Example:
2 NEW CALLS
NAME=WENDY ROBE
Display:
USE EASY DIAL
Press
SET
SET
.
Rotate
until the number you
EASY DIAL
want to store is displayed.
NO.=3453809
2
3
Press
.
Example:
WENDY ROBERTS
5
REGISTERED
DIRECTORY PROGRAM
Press
.
PRESS STATION
DIRECTORY PROGRAM
OR USE EASYDIAL
Display
ONE-TOUCH DIAL
For ONE-TOUCH DIAL 1–3:
Press the desired ONE-TOUCH DIAL key.
4
DIAL MODE
Press
Press
.
SET
Example:
NAME=WENDY ROBE
<S02>=3453809
.
SET
Example:
LOWER SET
EASY DIAL
For ONE-TOUCH DIAL 4–5:
Press the desired ONE-TOUCH DIAL key.
CALLER ID SEARCH
NAME=WENDY ROBE
Note:
Press
.
SET
●
You can confirm the stored items on the
<S04>=3453809
display (p. 26) or on the telephone number list
(p. 77).
For ONE-TOUCH DIAL 6–10:
Press LOWER , then press the desired
ONE-TOUCH DIAL key.
●
You can only store a name of up to 10
characters long.
●
To edit a name and number, see page 24.
●
If you enter a new item into ONE-TOUCH
DIAL, the previous entry will be overwritten.
NAME=WENDY ROBE
●
Press
.
If you use ONE-TOUCH DIAL 1–3 as a
broadcast station, you cannot store caller
information.
SET
<S06>=3453809
●
If the EASY DIAL directory is full, you cannot
store caller information.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Contact
Talking to the other party after fax transmission
or reception!
You can talk to the other party after a fax message is completed. This will save the added
expense and time of making another call.
This feature only works when the other party’s fax machine is equipped with a voice
contact feature.
Initiating voice contact
MONITOR
Press
while transmitting or
1
receiving documents.
VOICE STANDBY
Display:
Display
Handset
F
A
C
E
D
O
W
N
●
Your unit will call the other party with a
distinctive ring.
●
When the other party answers, your unit will
emit a distinctive ring.
Lift the handset to start talking.
2
MONITOR
Note:
●
If you initiate voice contact during transmission, the
unit will call you with a distinctive ring after all of the
documents have been transmitted.
●
If you initiate voice contact during reception, the unit
will call you with a distinctive ring after the current
page of the document is received.
Receiving a request for voice contact
If the other party initiates voice contact, your
1
unit will sound a distinctive ring and the
following will be displayed.
PLEASE PICK UP
Lift the handset within 10 seconds of the
distinctive ring to start talking.
2
Note:
●
If you do not answer within 10 seconds of the
distinctive ring, the line will be disconnected.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Faxes
Sending a fax manually!
Document guides
Adjust the width of the document guides to
1
2
the size of the document.
FACE DOWN
Display
Handset
Insert the document (up to 15 pages) FACE
DOWN until the unit grabs the document and
a single beep is heard.
STANDARD
Display:
RESOLUTION
If necessary, press
3
repeatedly to select the desired setting
(see below).
MONITOR
Press
or lift the handset.
4
5
6
MONITOR
FAX START
STOP
RESOLUTION
TEL=
Dial the fax number.
Example:
REDIAL/PAUSE QUICK SCAN START
TEL=5678901
When the fax tone is heard:
FAX START
Press
, and replace the
handset if you are using it.
OR
To select the resolution
When the other party answers your call:
Using the handset, ask them to press their
start button. When the fax tone is heard,
Select the desired resolution according to the
type of document.
STANDARD: For printed or typewritten
originals with normal-sized characters.
FAX START
press
and replace the
handset.
FINE: For originals with small printing.
CONNECTING.....
SUPER FINE: For originals with minute
printing.
PHOTO: For originals containing
photograph.
To stop transmission
PHOTO WITH TEXT: For originals
containing photograph and text.
Press STOP
.
To redial the last number
●
Using the “FINE”, “SUPER FINE”, “PHOTO”
or “PHOTO WITH TEXT” setting will
increase transmission time.
If the resolution setting is changed during
Press REDIAL/PAUSE
.
●
If the line is busy, the unit will automatically redial the
number up to 5 times.
●
feeding, it will be effective from the next
sheet.
The “SUPER FINE” resolution only works
●
●
During redial, the following will be displayed.
WAITING REDIAL
Display:
●
To cancel redialing, press STOP
.
with other compatible fax machines.
Convenient way to send a fax
Sending from memory
You can dial the fax number first before inserting the
document. This is convenient if the other party’s number
is indicated on the document.
You can press
QUICK SCAN START
to scan the
instead of
FAX START
document into memory before sending.
After storing, the unit will transmit the
document.
1. Enter the fax number.
●
The handset must be on the cradle.
2. Insert the document.
●
If the document exceeds the memory
3. Press FAX START
.
capacity (p. 78), sending will be canceled.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Faxes
Sending a fax using ONE-TOUCH DIAL and
EASY DIAL!
Before using this feature, program the desired names and telephone numbers into ONE-TOUCH
DIAL and EASY DIAL (p. 22, 23).
Adjust the width of the document guides to
Document guides
1
2
the size of the document.
Insert the document (up to 15 pages) FACE
DOWN until the unit grabs the document and
a single beep is heard.
Display
F
A
C
E
D
O
W
N
STANDARD
Display:
RESOLUTION
If necessary, press
3
4
repeatedly to select the desired setting
(p. 32).
Enter the fax number.
Using ONE-TOUCH DIAL 1–5:
Press the desired ONE-TOUCH DIAL key.
EASY DIAL
STOP
RESOLUTION
ONE-TOUCH DIAL
FAX START
Using ONE-TOUCH DIAL 6–10:
LOWER
LOWER
Press
, then press the desired
ONE-TOUCH DIAL key.
EASY DIAL
Using
:
Display the desired name and press
.
FAX START
Fax auto redial
If your unit does not send a fax
●
If the line is busy or if there is no answer, the unit
will automatically redial the number up to 5 times.
Confirm the stored telephone number on the
display and check that the number dialed is
answered by the other party’s machine (p. 26).
●
This feature is also available for delayed
●
transmission (feature #25 on page 57).
The connecting tone will be heard during dialing
●
During redial, the following will be displayed.
to tell you the status of the other party’s machine
(feature #76 on page 60).
WAITING REDIAL
Display:
●
To cancel redialing, press STOP
.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Faxes
Documents you can send!
Document weight
Maximum size
Effective scanning area
Minimum size
Single sheet:
45 g/m2 to 90 g/m2
(12 lb. to 24 lb.)
4 mm
Scanned
area
"
"
Multiple sheets:
60 g/m2 to 75 g/m2
(16 lb. to 20 lb.)
128 mm
(5")
4 mm
4 mm
4 mm
216 mm
(81⁄2")
208 mm (83⁄16"
Paper width
)
216 mm (81⁄2")
Note:
●
Remove clips, staples or other similar fasteners.
Check that ink, paste or correction fluid has dried.
Do not send the following types of documents. Use copies for fax transmission.
—Chemically treated paper such as carbon or carbonless duplicating paper
—Electrostatically charged paper
●
●
—Heavily curled, creased or torn paper
—Paper with a coated surface
—Paper with a faint image
—Paper with printing on the opposite side that can be seen through the front (e.g. newspaper)
To transmit more than 15 pages at a time
●
Insert the first 15 pages of the document. Add the extra pages (up to 15) before the last page is fed into
the unit.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Faxes
Reports for confirmation!
To confirm the communication results, the following reports are available.
Sending report
This report will provide you with a printed record of transmission results. To use this feature,
activate feature #04 (p. 55).
Sample of a sending report
SENDING REPORT
Jan. 20 2001 09:19AM
YOUR LOGO
:
YOUR FAX NO. :
NO.
01 2345678
START TIME
Jan.20 09:18AM 00'51
USAGE TIME MODE PAGES RESULT
CODE
43
OTHER FACSIMILE
SND
COMMUNICATION ERROR
00
Communication
message (p. 62)
Error code
Journal report
The unit stores the 30 most recent fax communication results. When a new communication
occurs, the oldest communication result will be erased.
—To print manually, see page 77.
—
To print automatically after every 30 new fax communications, activate feature #22 (p. 57).
Sample of a journal report
JOURNAL
Jan. 25 2001 11:22AM
YOUR LOGO
:
YOUR FAX NO. :
NO.
START TIME
USAGE TIME MODE PAGES RESULT
CODE
OTHER FACSIMILE
01 3332222
02 9998765
03 John
04 555556677
05
Jan.21 07:14AM 00'45
Jan.21 08:17AM 00'58
Jan.21 09:18AM 00'48
Jan.22 10:35AM 02'45
03'50
SND
SND
RCV
SND
SND
RCV
OK
OK
OK
01
02
01
03
05
COMMUNICATION ERROR 43
OK
OK
Communication
message (p. 62)
Error code
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Faxes
Broadcast transmission!
This feature is useful for sending the same document often to selected parties (up to 20
stations). First program the stations, then see page 39 for transmission.
●
The broadcast function utilizes ONE-TOUCH DIAL 1–3. The one-touch dial function will be canceled.
●
BROADCAST key 1 and 2 can accept ONE-TOUCH DIAL and EASY DIAL entries. MANUAL BROAD
key can also accept manual dialing entries.
Programming the stations
Using the dial keypad (only for
MANUAL BROAD):
DIRECTORY PROGRAM
Press
.
1
PRESS STATION
Display:
Enter the fax number and press
.
SET
DIR=3456789
Example:
OR USE EASYDIAL
DIR=3456789 [01]
For BROADCAST 1–2:
2
Press the desired
key.
BROADCAST
●
To enter other stations, repeat this
DIAL MODE
step (up to 20 stations).
EASY DIAL
Rotate
to select
Press
after programming all
SET
“BROADCAST”.
5
6
of the desired stations.
BROADCAST 1
Example:
REGISTERED
For MANUAL BROADCAST:
Press
.
MANUAL BROAD
PRESS STATION
DIAL MODE
OR USE EASYDIAL
EASY DIAL
Rotate
to select “MANUAL
MANUAL BROAD
BROAD”.
●
To program another broadcast key,
repeat steps 2 to 5.
Press
.
SET
3
4
STOP
Press
to exit the program.
DIR=
[00]
Enter stations.
Using ONE-TOUCH DIAL 1–5:
Press the desired ONE-TOUCH DIAL key.
MANUAL BROAD
BROADCAST
ONE-TOUCH
DIAL
Display
DIR=ANN
[01]
Example:
Using ONE-TOUCH DIAL 6–10:
Press LOWER , then press the desired
ONE-TOUCH DIAL key.
DIR=Luke
[01]
Example:
EASY DIAL
Using
:
Display the desired name and press
.
SET
John
[01]
Example:
SET
EASY DIAL LOWER
DIRECTORY PROGRAM
STOP
DIR=John
[02]
Note:
●
If you enter the wrong station, press STOP after step 4 to erase the station.
●
Confirm the stored items by printing a broadcast programming list (p. 77).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Faxes
Adding a new station
Display
EASY DIAL
Rotate
until the desired key
1
2
name is displayed.
<BROADCAST1>
Example:
DIRECTORY PROGRAM
Press
.
ADD= DELETE=#
Press
to select “ADD”.
3
4
EASY DIAL
you want to add is displayed (only using
EASY DIAL is available).
Rotate
until the desired name
EASY DIAL
DIRECTORY PROGRAM
SET
Mike
Example (EASY DIAL)
:
Example
(ONE-TOUCH DIAL-2)
Peter
<S02>
:
Press
.
SET
5
6
REGISTERED
Nikki
Example:
●
To add other stations, repeat steps 4 and 5
(up to 20 stations).
DIRECTORY PROGRAM
Press
to exit the
program.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Faxes
Erasing a stored station
Display
EASY DIAL
Rotate
until the desired key
1
2
name is displayed.
<BROADCAST1>
Example:
DIRECTORY PROGRAM
Press
.
ADD= DELETE=#
Press
to select “DELETE”.
3
4
EASY DIAL
you want to erase is displayed.
Rotate
until the desired station
EASY DIAL
SET
DIRECTORY PROGRAM
STOP
Dick
Example (EASY DIAL)
:
Example
(ONE-TOUCH DIAL-3)
Sam
<S03>
:
●
STOP
To cancel erasing, press
.
Press
.
SET
5
6
DELETE OK?
YES:SET/NO:STOP
Press
.
SET
DELETED
Bob
Example:
●
To delete other stations, repeat steps 4 to
6.
DIRECTORY PROGRAM
Press
to exit the
7
program.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Faxes
Sending the same document to pre-programmed parties
Insert the document FACE DOWN.
MANUAL BROAD
●
RESOLUTION
1
2
If necessary, press
repeatedly to select the desired setting
(p. 32).
BROADCAST
Display
C
E
D
O
N
F
A
W
Press the desired
(1–2) or
BROADCAST
.
MANUAL BROAD
●
You can also use
. Display the
EASY DIAL
desired key name, and press
FAX START
.
<BROADCAST1>
Example:
●
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
EASY DIAL
STOP
RESOLUTION
FAX START
SET
●
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (see below).
To cancel the broadcast setting
Note:
STOP
1. Press
while the unit displays the
●
If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 5 times after all of the other stations
have been called.
following message.
BROADCASTING
Display:
●
The display will show the following.
SEND CANCELLED?
YES:SET/NO:STOP
2. Press
.
SET
Sample of a broadcast sending report
BROADCAST REPORT 1
Jan. 10 2001 09:36AM
:
YOUR LOGO
YOUR FAX NO. :
NO. OTHER FACSIMILE START TIME
USAGE TIME
PAGES
RESULT
01
02
03
04
Mike
Peter
Sam
Jan.10 09:31AM
Jan.10 09:33AM
Jan.10 09:34AM
Jan.10 09:35AM
01'10
01'08
01'09
01'10
OK
OK
OK
OK
02
02
02
02
Kim
TOTAL
004'37
008
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Faxes
Setting the unit to receive faxes!
Use only as a fax
With answering machine
External telephone answering
machine (not included)
How you
want the unit
to receive
calls
You have a separate
telephone line just
for faxes.
You want to use the
fax machine with an
answering machine.
FAX ONLY mode (p. 43)
Activating an answering
machine (p. 44)
Turn AUTO ANSWER on by
AUTO ANSWER
pressing
.
Connect an external telephone
answering machine and set
the ring count of the answering
machine to less than 4.
You have to
set this.
●
Set the ring count in FAX
ONLY mode of the fax
machine to more than 4, if
you use with AUTO ANSWER
on.
ON
When receiving calls:
All incoming calls will be
answered as faxes.
When receiving voice calls:
The answering machine will
record voice messages.
This is how
the unit will
operate.
When receiving fax calls:
The fax machine will
disconnect the answering
machine and receive
documents.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Faxes
Use as telephone/
automatic fax
Mostly voice calls
Other
options
With a PC
If you have a
computer attached
to the same
telephone line, see
page 48.
Remote
fax activation
You want to answer
the voice call yourself
and receive fax calls
without rings.
You can also
receive a fax using
an extension
telephone. While
hearing a fax
calling tone with an
extension
You plan to answer
the calls yourself.
telephone, press
TEL/FAX mode (p. 46)
Set feature #77 to “TEL/FAX” (p. 61).
Turn AUTO ANSWER on by
TEL mode (p. 42)
Turn AUTO ANSWER off by
9
(pre-selected fax
activation code) to
receive a fax
(p. 48).
AUTO ANSWER
pressing
.
AUTO ANSWER
pressing
.
OFF
ON
When receiving voice calls:
The unit will ring.
When receiving calls:
You have to answer all calls
manually.
To receive a fax document,
press FAX START for
each fax call.
When receiving fax calls:
The unit will receive fax
documents without ringing.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Faxes
TEL mode!
(answering all calls manually)
Activating TEL mode
OFF
If the AUTO ANSWER light is on, turn it off by
AUTO ANSWER
pressing
.
Display
TEL MODE
Display:
Receiving a fax manually
When the unit rings, lift the handset to
1
2
answer the call.
Handset
STOP
FAX START
When:
—document reception is required,
—a fax calling tone (slow beep) is heard, or
—no sound is heard,
FAX START
press
.
CONNECTING.....
Replace the handset.
●
3
The unit will start fax reception.
To stop receiving
Fax reception in memory
When a printing problem is detected, the unit will
temporarily store the received document into
memory.
Press STOP
.
Friendly reception feature
While the document is in memory:
—the display will show an error message and the
following message alternately,
When you answer a call and hear a fax calling
tone (slow beep), the unit will automatically start
fax reception.
FAX IN MEMORY
Display:
●
If this feature is not required, set feature #46 to
off (p. 59).
—slow beeps will sound if feature #44 is set to on
(p. 59).
Auto reduction feature
●
Follow the instructions on pages 63 and 64 to
If the other party sends a document that is longer
than your recording paper, your unit will reduce the
receiving document to the proper size and print it.
If you want to print the original size, set feature
#37 to off (p. 58).
solve the problem.
For memory capacity, see page 78.
●
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Faxes
FAX ONLY mode!
(all calls are received as faxes)
Activating FAX ONLY mode
Set feature #77 to “FAX ONLY” (p. 61).
1
ON
If the AUTO ANSWER light is off, turn it on
AUTO ANSWER
2
by pressing
.
Display
FAX ONLY MODE
Display:
●
The unit will automatically answer all calls
and only receive fax documents.
Note:
●
The number of rings before a call is answered in the FAX ONLY mode can be changed (feature #06 on
page 55).
●
This mode should not be used with a telephone line which is used for both voice and fax calls. Fax
communication will be attempted even if someone is trying to call you.
If you have a telephone line just for faxes, we recommend the following setup.
Example: One telephone line is used for voice calls and a separate telephone line for faxes.
Line 1 – Voice calls
Line 2 – Fax calls
Only a fax machine is connected.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Faxes
Using the unit with an answering machine!
Setting up the fax machine and an answering machine
Connect the answering machine.
1
Remove the stopper
and connect the cord.
Stopper
Answering machine
(not included)
Telephone line cord
(not included)
Set the number of rings on the answering machine to less than 4.
●
2
3
This will allow the answering machine to answer the call first.
Record a greeting message on the answering machine.
Example: “This is (your name, business and/or telephone number). We are unable to
answer the phone right now. To send a fax, start transmission. To leave a
message, please speak after the beep. Thank you.”
●
We recommend you record your message around 10 seconds long and not to pause for
more than 4 seconds during the message. Otherwise, both machines will not function
correctly.
Activate the answering machine.
4
5
Set the receive mode of the fax machine to TEL mode (p. 42) or FAX ONLY mode (p. 43).
●
If you set to FAX ONLY mode, set the ring count in FAX ONLY mode to more than 4
(feature #06 on page 55). Using FAX ONLY mode will allow you to receive faxes if the
answering machine is full.
Check the remote access code of the answering machine and program the same code into
the remote operation ID of the fax machine. See feature #12 on page 56.
6
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Faxes
How the fax machine and answering machine work
Receiving voice calls
The answering machine will record voice messages automatically.
Receiving fax calls
The fax machine will receive documents automatically when the machine detects a fax calling
tone.
Receiving a voice message and fax document in one call
The answering machine will record the voice message first. The fax machine will then be
activated by the caller’s request and will receive the document.
Note:
●
Every time the fax machine receives a document, a silent pause or fax tone may be recorded on the
answering machine.
Receiving a voice message and fax document in one call
The caller can leave a voice message and send a fax document during the same call.
Inform the caller of the following procedure beforehand.
1. The caller calls your fax machine.
●
The answering machine will answer the call.
2. The caller can leave a message after the greeting message.
3. The caller presses
(pre-selected fax activation code).
9
●
The fax machine will activate the fax function.
4. The caller presses the start button to send a document.
Note:
●
The fax activation code can be changed in feature #41 (p. 59).
●
If the wrong fax activation code is entered, the caller must wait at least 5 seconds to reenter the correct
code.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Faxes
TEL/FAX mode!
(receiving voice calls with rings and fax calls
without rings when you are near the unit)
Use this mode when you are always near the fax machine, and want to receive faxes without the
unit ringing. When a call is received, the fax machine will work as follows. To set TEL/FAX mode,
see below.
A call is received.
The fax machine will ring up to 3 times.
The fax machine will not ring.
“TEL/FAX delayed ring count”
“Silent fax recognition ring count”
Voice call
●
The call is connected.
●
The calling party will hear a different
ring back tone.
Fax calling
tone*
Answer the call.
The fax machine will automatically
receive documents without
ringing.
●
If the call is not answered, the fax
machine will activate the fax function for
the other party’s fax machine that did
not send a fax calling tone.
* A fax calling tone is automatically generated by
the sending fax machine. Some fax machines
do not have this capability.
Note:
To set TEL/FAX mode
●
The fax machine will display the following when a
1. Set feature #77 to “TEL/FAX” (p. 61).
call is received.
2. If the AUTO ANSWER light is off, turn it on by
INCOMING CALL
The ringer should be on (p. 21).
Display:
AUTO ANSWER
pressing
.
●
ON
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Faxes
When an extension telephone is connected
A call is received.
The extension telephone will not ring, but
the fax machine will ring up to 3 times.
“Silent fax recognition ring count”
The fax machine will not ring, but
the extension telephone will ring
twice.
Voice call
“TEL/FAX delayed ring count”
●
The call is connected.
●
The calling party will hear a different
Fax calling
tone*
ring back tone.
You can answer the call with the
extension telephone.**
1. Lift the handset.
The fax machine will automatically
receive documents without
ringing.
0
2. Enter
(default code) while the
ring back tone is heard.
The code number can be changed
in feature #49 (p. 59).
●
Answer the call.
●
If the call is not answered, the fax
* A fax calling tone is automatically generated by
the sending fax machine. Some fax machines
do not have this capability.
** This feature may not function depending on the
type of an extension telephone. If the fax
machine activates the fax function, press
machine will activate the fax function for
the other party’s fax machine that did
not send a fax calling tone.
STOP
on the fax machine in step 2 to talk
with the calling party.
TEL/FAX delayed ring count
Silent fax recognition ring count
The number of rings generated before the fax
machine answers depends on the setting of feature
#78 on page 61. The fax machine will not generate
an audible ring during this time.
The fax machine generates audible rings to
indicate that it is receiving a voice call. The number
of rings generated depends on the setting of
feature #30 on page 58. This signal will not ring at
an extension telephone.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Faxes
Using with an answering machine and
computer!
We recommend that you always connect the fax machine directly to the wall jack.
E
X
T
Wall jack
Wall jack
Computer
Answering machine
Note:
●
●
●
Set the fax machine to TEL mode.
The device which has the shortest ring count will answer a call first.
If you use your computer as an answering machine, connect the telephone line cord from the EXT jack to
the computer.
Extension telephone!
If you use the fax machine with an extension telephone, you can receive fax documents using
FAX START
the extension telephone. You do not have to press
on the fax machine.
Important:
●
Use a touch tone telephone as the extension telephone and enter the fax activation code firmly.
When the extension telephone rings, lift the
1
handset of the extension telephone.
To the EXT jack
or the same line
When:
2
—document reception is required,
—a fax calling tone (slow beep) is heard, or
—no sound is heard,
Extension telephone
press
(pre-selected fax
9
activation code) firmly.
Hang up the handset.
●
3
The fax machine will start reception.
Note:
●
You can change the fax activation code in feature #41
(p. 59).
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Faxes
Turning the AUTO ANSWER mode on remotely!!
When you are not in, and the AUTO ANSWER mode of your unit is set to off (TEL mode), you
can turn the AUTO ANSWER mode (FAX ONLY or TEL/FAX mode) on from a remote location
using a touch tone telephone.
1. Call your unit and wait for 10 rings.
●
You will hear a beep signal.
2. — To switch to the FAX ONLY mode:
Press
— To switch to the TEL/FAX mode:
Press within 8 seconds.
within 8 seconds.
3. Hang up the handset.
Note:
●
Press
or
within 8 seconds after hearing the beep, otherwise the call will be interrupted and the
unit will remain in the TEL mode.
Receive polling!
(retrieving a fax placed on another fax machine)
This feature allows you to retrieve a document from another compatible machine. Therefore you
pay for the call.
Make sure that no documents are fed into your unit and that the other party’s machine is ready
for your call.
MENU
Press
four times.
POLLING
1
2
Display:
Display
Press
.
SET
FAX=
Dial the fax number.
Example:
3
4
FAX=3331111
Press
.
SET
MENU
CONNECTING.....
SET
●
The unit will start reception.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Faxes
Black list function!
You can reject receiving facsimiles by registering the black list numbers. Up to 10 phone
numbers can be stored as follows.
MENU
Press to store.
SET
Press
Press
Press
.
7
8
1
2
3
4
NO.=
SYSTEM SET UP
Display:
, then
●
To store other numbers, repeat
from step 6.
.
2 7
MENU
Press
.
BLACK LIST
.
SET
Display
MENU
MODE=OFF
EASY DIAL
Rotate
to select “ON”.
MODE=ON
●
If this feature is not required, select “OFF”.
Press
.
SET
5
6
NO.=
SET
STOP
EASY DIAL
Enter the fax phone number you require as
unauthorized number.
●
You can enter a total of 22 digits.
NO.=5552233
Note:
●
If you make a mistake while programming, press STOP , then make the correction.
●
To erase a programmed phone number, press
in step 6.
when the cursor is positioned on the first number
STOP
●
To confirm the programmed phone number, print out the setup list. See page 77.
Example:
SETUP LIST
ADVANCED FEATURE LIST
NO.
CURRENT SETTING
FEATURE
#22
#23
#25
JOURNAL AUTO PRINT
OVERSEAS MODE
DELAYED TRANSMISSION
ON
OFF
OFF
[ON,OFF]
[ON,OFF]
[ON,OFF]
DESTINATION =
START TIME = 12:00AM
#26
#27
AUTO CALLER ID LIST
BLACK LIST
ON
ON
[ON,OFF]
[ON,OFF]
01 5552233
06 123123123
07 456456456
08
09
10
02 1234567890
03 11223344556
04 0987654321
05 369258147
Black list numbers
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Receiving Faxes
Pager call - when the unit receives a fax!
This feature allows your unit to call your pager when your unit receives a fax document.
MENU
Press
Press
Press
.
Display
MENU
1
2
3
4
SYSTEM SET UP
Display:
, then 7 0 .
FAX PAGER CALL
.
SET
MODE=OFF
EASY DIAL
MONITOR
SET
EASY DIAL
Rotate
to select “ON”.
REDIAL/PAUSE
(Pauses)
MODE=ON
●
If this feature is not required, select “OFF”.
Press
.
SET
5
6
NO.=
Enter your pager number.
You can enter a total of 46 digits and/or
●
pauses.
Example:
1 202 555 1234PP12345678PP5555#
Pauses
Your pager
number
Your pager access
code, if required.
Message you want displayed on
your pager
When your pager receives a pager call
Press
.
SET
Your pager will display the message you
entered in step 6. (For example: 5555)
●
7
The unit will dial the stored number.
PAGER TEST
Check that your pager receives a pager test
call.
8
9
Pager
5
5
5
5
Press
.
MONITOR
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying
Making a copy!
The unit can make single or multiple copies (up to 99).
Adjust the width of the document guides to
Document guides
1
2
the size of the document.
Insert the document (up to 15 pages) FACE
DOWN until the unit grabs the document and
a single beep is heard.
Display
F
A
C
E
D
O
W
N
STANDARD
Make sure the handset is on the cradle.
Display:
●
COPY START
Press
.
3
4
100% FINE [01]
COPY START
●
If necessary, enter the number of copies
STOP
(up to 99).
COLLATE
RESOLUTION
COPY ZOOM
COPY START
Press
●
.
The unit will start copying.
Note:
●
Any transmittable document can be copied (p. 34).
To stop copying
STOP
Press
.
Convenient way to make a copy!
The following settings are available before you start copying.
●
Resolution
●
Reduction/enlargement rate
●
Collation (sort)
To select the resolution according to the type of
document
RESOLUTION
Press
repeatedly to select the desired setting.
Display while copying
FINE: For printed or typewritten originals with small printing.
SUPER FINE: For originals with minute printing.
PHOTO: For originals containing photograph.
100% FINE [01]
100% S-FINE[01]
100% PHOTO [01]
100% MIXED [01]
PHOTO WITH TEXT: For originals containing photograph and
text.
●
If you select “STANDARD”, copying will be done using “FINE” mode.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying
To reduce or enlarge a document
To make a reduced copy, press
To make an enlarged copy, press
COPY ZOOM
repeatedly and
COPY ZOOM
repeatedly and
select the desired reduction rate. The unit
can reduce copies to as little as 50% of the
original by changing the reduction rate 5%
at a time.
select the desired enlargement rate. The
unit can enlarge copies to as much as 200%
of the original by changing the enlargement
rate 5% at a time.
Example: 70% reduced copy
Example: 150% enlarged copy
Original document
Reduced copy
Original document
Enlarged copy
A
C
B
D
A
C
B
D
A B
A B
C D
C D
Note:
●
The display will show the rate you selected while copying.
75% FINE [01]
Example:
Reduction/enlargement rate
●
For an enlarged copy, the unit will only enlarge the center of the upper part of the document. To make an
enlarged copy of the bottom of the document, turn the document around, insert it into the unit, and then
make a copy.
To collate multiple copies
The unit can collate multiple copies in the same order as the original document pages.
Press
until the following is displayed and start copying.
COLLATE
COLLATE=ON
Display:
Example: Making two copies of a 4-page original document
4
3
4
2
4
1
3
3
4
2
3
2
1
2
1
1
Uncollated pages
Collated pages
Note:
●
The unit will store the documents into memory while collating copy. If memory becomes full while storing,
the unit will only print out the stored pages.
●
While collating copies, the display will show the following.
100% FINE [01]C
shows collating copy
Example:
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Summary
Programming!
The unit provides various programming features. Program the desired settings by referring to the
programming tables (p. 55–61).
General programming method
MENU
Press
.
Display
MENU
1
2
SYSTEM SET UP
Display:
Select the feature you wish to program.
■For basic features (p. 55, 56):
EASY DIAL
Rotate
feature is displayed.
■For advanced features (p. 57–61):
until the desired
EASY DIAL
Rotate
until the following is
displayed.
ADVANCED MODE
EASY DIAL
SET
EASY DIAL
and rotate
Press
SET
until the desired feature is displayed.
Press
.
SET
●
3
4
The current setting of the feature will be
displayed.
EASY DIAL
Rotate
is displayed.
until the desired setting
●
This step may be slightly different
depending on the feature.
Press
.
SET
●
5
6
The setting you selected is set, and the
next feature will be displayed.
MENU
To exit programming, press
.
Programming by entering the program
code number directly
To cancel programming
Press MENU to exit the program.
You can select a feature by directly entering the
program code (# and 2-digit number) instead of
using EASY DIAL
1. Press MENU
2. Press and the 2-digit code number.
.
.
3. Follow steps 3 to 6 above.
●
See programming tables for code numbers
(p. 55– 61).
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Summary
Basic features!
Programming table
Code
Display & Feature
Settings
How the unit operates
mm/dd/yy
hh:mm
(2 digits for
each entry)
See page 17 for details.
SET DATE & TIME
#01
To set the date and time.
See page 18 for details.
See page 20 for details.
(Up to 30
characters)
YOUR LOGO
#02
#03
To set your logo.
YOUR FAX NO.
(Up to 20
digits)
To set your facsimile telephone
number.
“ERROR”: The sending report will
be printed only when fax
ERROR
SENDING REPORT
To print and check the sending
report for fax transmission results
(p. 35).
transmission fails.
“ON”: The sending report will be
printed out after every transmission.
#04
#06
ON
OFF
If you are using the unit with an
answering machine, set to
more than 4 (p. 44).
FAX RING COUNT
1, 2, 3, 4, 5,
6, 7, 8, 9
To change the number of rings
before the unit answers a call in
FAX ONLY mode.
(The default setting is in bold type.)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Summary
Basic features (cont.)!
How to set menu options
MENU
1. Press
.
5. Press
.
SET
EASY DIAL
feature is displayed.
MENU
2. Rotate
until the desired
until the desired
6. Press
.
Note:
●
3. Press
.
SET
Step 4 may be slightly different depending on the
feature.
See page 54 for more details.
EASY DIAL
setting is displayed.
4. Rotate
●
Programming table (cont.)
Code
#12
Display & Feature
Settings
How the unit operates
To select “ON” and enter ID:
REMOTE TAM ACT.
1. Press MENU
.
If you are using the unit with an
answering machine, activate this
feature, and set the remote
activation ID to secure the remote
operation for the answering
machine.
2. Rotate
feature.
3. Press
4. Rotate
5. Press
and select this
to select “ON”.
EASY DIAL
ON / ID=11
.
SET
EASY DIAL
.
SET
6. Enter your ID from 1 to 5 digits,
using 0–9,
7. Press
8. Press MENU
and #.
.
.
OFF
SET
“TONE”: For tone dial service.
“PULSE”: For rotary pulse dial
service.
DIALLING MODE
TONE
PULSE
BELL
#13 If you cannot dial, change the
setting depending on your
telephone line service.
You can select the bell or the melody.
The selected bell or melody will
sound while setting.
MELODY RINGER
#17
To set the ring melody.
MELODY
(A, B, C, D)
(The default setting is in bold type.)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Summary
Advanced features!
How to set menu options
MENU
1. Press
.
EASY DIAL
4. Rotate
until the desired
setting is displayed.
EASY DIAL
2. Rotate
until the following is
displayed.
5. Press
.
SET
ADVANCED MODE
Display:
MENU
6. Press
.
EASY DIAL
until
the desired feature is displayed.
Press
and rotate
SET
Note:
●
Step 4 may be slightly different depending on the
feature.
3. Press
.
SET
●
See page 54 for more details.
Programming table
Code
Display & Feature
Settings
ON
How the unit operates
“ON”: The unit will print the journal
report automatically after every 30
new fax communications (p. 35).
AUTO JOURNAL
#22
To print the journal report
OFF
ON
automatically for fax communications.
After transmission, the unit will turn
off automatically.
OVERSEAS MODE
●
This feature is not available for
If you have difficulty sending an
overseas fax, activate this feature
before starting transmission. This
feature makes sending documents
easier as the transmission speed is
slowed down.
broadcast transmission.
#23
●
The calling charge may be higher.
OFF
To send a document:
1. Insert the document.
2. Follow steps 1–3 above.
DELAYED SEND
ON /
fax no. /
hh:mm
To send a fax automatically at a
specified time.
This allows you to take advantage
of low-cost calling hours offered by
your telephone company.
3. Rotate
to select “ON”.
EASY DIAL
4. Press
.
SET
5. Enter the fax number.
6. Press
7. Enter the transmission start time.
.
SET
#25
●
The setting can be reserved to
Press
8. Press
9. Press MENU
to select “AM” or “PM”.
take place up to 24 hours in
advance.
.
SET
OFF
.
●
To cancel after programming,
press STOP then
.
SET
“ON”: The unit will print the Caller
ID list automatically after every 30
new calls (p. 29).
ON
AUTO CALL. LIST
#26
To print the Caller ID list
automatically.
OFF
(The default setting is in bold type.)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Summary
Advanced features (cont.)!
How to set menu options
MENU
1. Press
.
EASY DIAL
4. Rotate
until the desired
setting is displayed.
EASY DIAL
2. Rotate
until the following is
displayed.
5. Press
.
SET
ADVANCED MODE
Display:
MENU
6. Press
.
EASY DIAL
until
the desired feature is displayed.
Press
and rotate
SET
Note:
●
Step 4 may be slightly different depending on the
feature.
3. Press
.
SET
●
See page 54 for more details.
Programming table (cont.)
Code
Display & Feature
Settings
ON
How the unit operates
See page 50 for details.
BLACK LIST
#27
To set the black list function.
OFF
See pages 46 and 47 for details.
SILENT FAX RING
3, 4, 5, 6, 7,
8, 9
#30
To change the number of rings
when the unit detects a voice call in
TEL/FAX mode.
The duplex ring service gives you
an additional phone number on a
single telephone line, with a
different ringing pattern. When you
wish to use the additional number
as a fax, set this feature ON.
RING DETECTION
ON
If you subscribe to a duplex ring
service from your telephone
company, activate this feature.
#31
●
For more information on the
availability of this service,
please contact your telephone
company before setting this
feature on.
OFF
“ON”: The unit will fit a received
document onto your recording
paper.
“OFF”: The unit will print the
original size.
AUTO REDUCTION
ON
#37
#39
To receive a fax document that is
longer than your recording paper.
OFF
“NORMAL”: For normal contrast
“DARKER”: Used when the display
contrast is too light.
NORMAL
LCD CONTRAST
To adjust the display contrast.
DARKER
(The default setting is in bold type.)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Summary
Code
#41
Display & Feature
FAX ACTIVATION
Settings
How the unit operates
1. Follow steps 1–3 on page 58.
2. Rotate
“ON”.
to select
EASY DIAL
ON /
CODE=
If you use an extension telephone
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 48).
3. Press
.
SET
9
4. Enter your code from 2 to 4 digits,
using 0–9 and
5. Press
.
.
SET
●
This code is also used to receive
6. Press MENU
.
a voice message and a fax in the
same call (p. 45).
OFF
ON
●
Do not enter “0000”.
If you hear slow beeps, clear the
printing problem or supply paper to
print the stored document. The
beeps will stop.
RECEIVE ALERT
#44 To alert you with beeps when a
received document is stored into
memory due to a problem.
OFF
ON
“ON”: You do not have to press
FRIENDLY RCV
for fax reception.
FAX START
#46 To receive a fax automatically when
you answer a call and hear a fax
calling tone (slow beep).
OFF
1. Follow steps 1–3 on page 58.
AUTO DISCONNECT
ON /
CODE=
2. Rotate
to select “ON”.
EASY DIAL
0
3. Press
.
SET
To answer a call with an extension
4. Enter your code from 2 to 4 digits,
using 0–9 and
5. Press
6. Press MENU
#49
#58
telephone in TEL/FAX mode
(p. 47).
.
.
SET
OFF
.
“NORMAL”: Used for normal
writing.
“LIGHT”: Used for faint writing.
“DARKER”: Used for dark writing.
ORIGINAL
NORMAL
LIGHT
To send or copy a document with
faint or dark writing, set this feature
before starting transmission or
copying.
●
This feature will return to the
normal mode after transmission
or copying.
DARKER
(The default setting is in bold type.)
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Summary
Advanced features (cont.)!
How to set menu options
MENU
1. Press
.
EASY DIAL
4. Rotate
until the desired
setting is displayed.
EASY DIAL
2. Rotate
until the following is
displayed.
5. Press
.
SET
ADVANCED MODE
Display:
MENU
6. Press
.
EASY DIAL
until
the desired feature is displayed.
Press
and rotate
SET
Note:
●
Step 4 may be slightly different depending on the
feature.
3. Press
.
SET
●
See page 54 for more details.
Programming table (cont.)
Code
Display & Feature
Settings
How the unit operates
This feature is available when the
transmitting/receiving stations are
ECM compatible.
ECM SELECTION
ON
ECM stands for Error Correction
Mode. To send a fax even if there
is static interference on the
telephone line.
#68
●
If documents are in memory, clear
them before making the setting
(p. 42).
OFF
See page 51 for details.
FAX PAGER CALL
ON
#70 If you have a pager and wish to
know when your unit receives a
fax, activate this feature.
OFF
You can confirm the status of the
other party’s machine.
CONNECTING TONE
ON
●
If the ring back tone continues, the
If you often have trouble when
other party’s machine may not be a
facsimile or may have run out of
paper. Check with the other party.
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.
#76
OFF
●
The connecting tone volume
cannot be adjusted.
(The default setting is in bold type.)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Summary
Code
#77
Display & Feature
AUTO ANSWER
Settings
How the unit operates
“FAX ONLY”: Facsimile only mode
(p. 43)
“TEL/FAX”: Telephone/Facsimile
mode (p. 46, 47)
FAX ONLY
To change the receive mode in the
AUTO ANSWER setting.
TEL/FAX
See pages 46 and 47 for details.
TEL/FAX RING
1, 2, 3, 4, 5,
6, 7, 8, 9
If you use an extension telephone
in TEL/FAX mode, select the
desired number of rings of the
extension telephone.
#78
#79
#80
“ON”: The toner cartridge will last
longer.
ON
TONER SAVE
●
This feature may reduce print
To save on toner consumption.
OFF
quality.
1. Follow steps 1–3 on page 60.
SET DEFAULT
2. Rotate
“YES”.
to select
EASY DIAL
YES
To reset on advanced features to
their default settings.
3. Press
4. Press
5. Press MENU
.
SET
SET
again.
.
NO
(The default setting is in bold type.)
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Reports!
If your unit cannot send a fax, check the following:
—the number you dialed is correct,
—the other party’s machine is a facsimile.
If the problem remains, correct it by following the communication message printed on the
sending and journal reports (p. 35).
Error
code
Communication message
Cause & solution
●
COMMUNICATION ERROR
40–42
46–52
58, 65
68, 72
FF
A transmission or reception error occurred. Try
again or check with the other party.
●
43
44
A line problem occurred. Connect the telephone
line cord to a different jack and try again.
●
An overseas transmission error occurred. Try using
the overseas mode of feature #23 (p. 57).
●
DOCUMENT JAMMED
—
The document is jammed. Remove the jammed
document (p. 69).
●
ERROR-NOT YOUR UNIT
54
59
70
A transmission or reception error occurred because
of a problem with the other party’s fax machine.
Check with the other party.
●
MEMORY FULL
—
—
—
The document was not received due to memory
being full.
●
NO DOCUMENT
The document was not fed into the unit properly.
Reinsert the document and try again.
●
OTHER FAX NOT RESPOND
The other party’s fax machine is busy or has run
out of recording paper. Try again.
●
The document was not fed properly. Reinsert the
document and try again.
●
The other party’s fax machine rings too many
times. Send the fax manually – dial the number,
FAX START
confirm the fax tone, and press
.
●
The other party’s machine is not a facsimile. Check
with the other party.
●
The number you dialed is not in service.
●
STOP
was pressed and fax communication was
PRESSED THE STOP KEY
—
canceled.
●
THE COVER WAS OPENED
OK
—
—
The front cover was opened. Close it and try again.
●
Fax communication was successful.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Display!
If the unit detects a problem, one or more of the following messages will appear on the display.
Display message
Cause & solution
●
There is something wrong with the unit. Contact our service
personnel.
CALL SERVICE
●
There is something wrong with the drum unit. Replace the drum
unit and the toner cartridge (p. 74).
CHANGE DRUM
●
The document was not fed into the unit properly. Reinsert the
document. If misfeeding occurs frequently, clean the document
feeder rollers (p. 72) and try again. If the problem remains, adjust
the feeder pressure (p. 71).
CHECK DOCUMENT
●
The drum unit was not inserted properly. Reinsert it correctly
(p. 12).
CHECK DRUM
●
Memory (telephone numbers, parameters, etc.) has been erased.
Re-program.
CHECK MEMORY
●
The front cover is open. Close it.
COVER OPEN
●
There is no space to store new stations in the EASY DIAL
directory. Erase unnecessary stations (p. 25).
EASY DIAL FULL
●
Recording paper was not fed into the unit properly. Reinsert the
recording paper (p. 71).
FAILED PICK UP
FAX IN MEMORY
●
The unit has a document in memory. See the other displayed
message instructions to print out the document.
●
Memory is full of received documents due to a lack of recording
paper or a recording paper jam. Install paper or clear the jammed
paper.
FAX MEMORY FULL
●
When performing memory transmission, the document being
stored exceeds the memory capacity of the unit. Transmit the
entire document manually.
●
When making a copy, the document being stored exceeds the
STOP
MEMORY FULL
MODEM ERROR
memory capacity of the unit. Press
message. Divide the document into sections.
to clear the
●
There is something wrong with the modem circuit. Contact our
service personnel.
(continued)
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Display message
Cause & solution
●
The other party’s fax machine is busy or has run out of recording
paper. Try again.
NO FAX REPLY
OUT OF PAPER
●
Recording paper is not installed or the unit has run out of paper.
Install paper (p. 15).
●
Recording paper is not fed into the unit properly. Reinstall paper
(p. 15).
●
A recording paper jam occurred. Clear the jammed paper (p. 70).
PAPER JAMMED
PLEASE WAIT
●
The unit is warming up. Wait for a while.
●
The other party’s fax machine does not provide the polling
function. Check with the other party.
POLLING ERROR
●
The other party’s fax machine is busy or has run out of recording
paper. Try again.
REDIAL TIME OUT
REMOVE DOCUMENT
●
The document is jammed. Remove the jammed document (p. 69).
5
●
Attempted to transmit a document longer than 600 mm (23 ⁄8" ).
STOP
Press
to remove the document. Divide the document
into two or more sheets and try again.
●
The toner cartridge is empty. Replace the toner cartridge (p. 74).
TONER EMPTY
TONER LOW
●
The remaining toner is low. Replace the toner cartridge as soon
as possible (p. 74). We recommend you replace the drum unit
every third time you replace the toner cartridge. To check the
drum life and quality, please print the printer test list (p. 77).
●
A transmission error occurred. Try again.
TRANSMIT ERROR
WRONG PAPER
●
The unit printed on paper which is shorter than A4 size paper.
To prevent the drum unit from becoming dirty, use A4 size paper.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
When a function does not work, check here
before requesting help!
General
Problem
●
Cause & solution
I cannot make and receive
calls.
The power cord or telephone line cord is not connected.
Check the connections (p. 16).
●
If you used a splitter to connect the unit, remove the
splitter and connect the unit to the wall jack directly. If the
unit operates properly, check the splitter.
●
I cannot make calls.
The dialing mode setting is wrong. Change the setting of
feature #13 (p. 56).
●
The unit does not work.
Disconnect the unit from the telephone line and connect
the line to a known working telephone. If the working
telephone operates properly, contact our service personnel
to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
●
The unit does not ring.
The ringer volume is set to off. Adjust it (p. 21).
The other party complains
they only hear a fax tone and
cannot talk.
●
FAX ONLY mode is set. Tell the other party the number is
only used for faxes.
●
Change to TEL mode (p. 42) or TEL/FAX mode (p. 46).
REDIAL/PAUSE
does not function properly.
The
button
●
If this button is pressed during dialing, a pause will be
inserted. If pressed immediately after a dial tone is
obtained, the last number dialed will be redialed.
The receive mode does not
function properly.
●
A duplex ring pattern of feature #31 is set (p. 58).
●
TEL/FAX mode is set (p. 46, 47).
During programming, I cannot
enter the code or ID number.
●
All or part of the numbers are the same. Change the code
or ID number of features #12 (p. 56), #41 and #49 (p. 59).
The unit beeps.
●
STOP
Recording paper has run out. Press
beeps and install paper.
to stop the
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Fax – sending
Problem
Cause & solution
●
I cannot send documents.
The telephone line cord is connected to the EXT jack on
the unit. Connect to the LINE jack (p. 16).
●
The other party’s fax machine is busy or has run out of
recording paper. Try again.
●
The other party’s machine is not a facsimile. Check with
the other party.
●
The other party’s fax machine rings too many times. Send
the fax manually – dial the number, confirm the fax tone,
FAX START
then press
.
●
The other party complains that
letters on their received
document are distorted or not
clear.
If your line has special telephone services such as call
waiting, the service may have been activated during fax
transmission. Connect the unit to a line that does not have
these services.
●
The extension telephone on the same line is off the hook.
Hang up the extension telephone and try again.
●
Try copying the document. If the copied image is clear,
there may be something wrong with the other party’s
machine.
●
The other party complains that
dirty patterns or black lines
appear on their received
document.
The glass or rollers are dirty. Clean them (p. 72).
●
I cannot make an international
fax call.
Use the overseas transmission mode of feature #23 (p. 57).
●
Add two pauses at the end of the telephone number or dial
manually.
Fax – receiving
Problem
Cause & solution
●
I cannot receive documents.
The telephone line cord is connected to the EXT jack on
the unit. Connect to the LINE jack (p. 16).
●
I cannot receive documents
automatically.
The receive mode is set to TEL mode. Set to FAX ONLY
mode (p. 43) or TEL/FAX mode (p. 46, 47).
●
The time taken to answer the call is too long. Decrease the
number of rings of features #06 (p. 55), #30 (p. 58) and #78
(p. 61).
●
The display shows the
following message, but faxes
are not received.
The incoming call is not a fax. Change the receive mode to
TEL mode (p. 42).
CONNECTING.....
A blank sheet is ejected.
●
The other party placed the document in their fax machine
the wrong way. Check with the other party.
A white line or a dirty pattern
appears on your recording
paper.
●
The glass or rollers are dirty. Clean them (p. 72).
(continued)
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Fax – receiving (cont.)
Problem
Cause & solution
●
The printing quality is poor.
The other party sent a faint document. Ask them to send a
clearer copy of the document.
●
Some paper has instructions recommending which side to
print on. Try turning the paper over.
●
You may have used paper with a cotton and/or fiber content
that is over 20%, such as letterhead or resume paper.
●
The remaining toner is low. Replace the toner cartridge
(p. 74).
●
We recommend you replace the drum unit every third time
you replace the toner cartridge (p. 74). To check the drum
life and quality, please print the printer test list (p. 77).
●
The toner save mode of feature #79 is on (p. 61).
Receive mode
Cause & solution
Problem
●
I cannot select the desired
receive mode.
If you want to set FAX ONLY or TEL/FAX
mode:
ON
—select the desired mode using feature
#77 (p. 61), and
AUTO ANSWER
—press
the AUTO ANSWER light.
If you want to set TEL mode:
AUTO ANSWER
to turn on
●
—press
the AUTO ANSWER light.
to turn off
OFF
ON
●
The unit is not in AUTO ANSWER mode.
AUTO ANSWER
The other party complains that
they cannot send a document.
Press
AUTO ANSWER light.
to turn on the
Copying
Cause & solution
Problem
●
The unit does not make a copy.
You cannot make a copy during programming. Make the
copy after programming or stop programming.
●
A black line, a white line or a
dirty pattern appears on the
copied document.
The glass or rollers are dirty. Clean them (p. 72).
●
The printing quality is poor.
Some paper has instructions recommending which side to
print on. Try turning the paper over.
Copy
Original
●
You may have used paper with a cotton and/or fiber
content that is over 20%, such as letterhead or resume
paper.
ABC
●
The remaining toner is low. Replace the toner cartridge
(p. 74).
●
We recommend you replace the drum unit every third time
you replace the toner cartridge (p. 74). To check the drum
life and quality, please print the printer test list (p. 77).
●
The toner save mode of feature #79 is on (p. 61).
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Using an answering machine
Cause & solution
Problem
●
I cannot receive documents
automatically.
Your greeting message on the answering machine is too
long. Shorten the message (up to 10 seconds).
●
The answering machine rings too many times. Set to 1 or 2
rings.
●
I cannot receive voice
messages.
Check if the answering machine is turned on and
connected to the fax machine properly (p. 44).
●
Set the number of rings on the answering machine to 1
or 2.
●
I cannot retrieve recorded voice You did not program your remote access code in your fax
messages on the answering
machine from a remote
location.
machine correctly. Program the same code that is
programmed on the answering machine to the fax machine
with feature #12 (p. 56).
●
I pressed the remote access
code to access the answering
machine remotely, but the line
was disconnected.
The code may include “#” which is used for certain features
provided by telephone companies. Change the code on the
answering machine to another number which does not
include “#”. Also change the code of the fax machine with
feature #12 (p. 56).
●
Callers complain that they
cannot send a document.
Your answering machine has run out of recording tape.
Rewind the tape to record messages.
●
You set the answering machine to only give a greeting
message.
If a power failure occurs!
●
The unit will not function.
●
Fax transmission and reception will be interrupted.
●
If delayed transmission of feature #25 (p. 57) is programmed and the start time has passed
during a power failure, transmission will be attempted soon after power is restored.
●
If fax documents are stored in memory, they will be lost. When power is restored, a power
down report will be printed out stating which contents in memory have been erased.
Sample of a power down report
POWER DOWN REPORT
POWER DOWN AT:Jan. 05 2001 04:30AM
RESTARTED AT:Jan. 05 2001 04:31AM
YOUR LOGO
:
YOUR FAX NO. :
<< WARNING >>
CONTENTS HAVE BEEN CLEARED DUE TO POWER DOWN.
FOR ADDITIONAL INFORMATION, PLEASE SEE THE JOURNAL REPORT.
NO. OTHER FACSIMILE
01 <FAX # NOT AVAIL.>
MODE
RCV
PAGES
01
FUNCTION
MEMORY RECEIVE
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Jams
Document jams - sending!
Push the front cover open button then open
Front cover
1
the front cover.
Front cover
open button
Caution:
The fuser unit gets hot.
Do not touch it.
Fuser unit
Jammed document
Pull down the middle guide while holding the
front cover.
2
3
4
Front cover
Middle
guide
Remove the jammed document carefully.
Lift the middle guide firmly.
Close the front cover, until locked, by
pushing down on both sides.
Front cover
5
Note:
●
Do not pull out the jammed document forcibly before
opening the front cover.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Jams
Recording paper jam!
When the recording paper has jammed in the unit
The display will show the following message.
PAPER JAMMED
Push the front cover open button then
open the front cover.
Front cover
1
2
Front cover
open button
Caution:
The fuser unit gets hot.
Do not touch it.
Fuser unit
When the recording paper has jammed
near the drum and toner unit:
Remove the jammed paper by pulling it
toward you.
Jammed paper
When the recording paper has jammed
near the recording paper exit:
Remove the jammed paper by pulling it
toward you.
Jammed paper
Front cover
Close the front cover, until locked, by
pushing down on both sides.
3
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Jams
Remove the recording paper.
Straighten and reinsert it into the
recording paper entrance.
Recording
paper
entrance
4
When the recording paper was not fed into the unit
properly
The display will show the following message.
Recording
paper
FAILED PICK UP
entrance
Remove the recording paper. Straighten and
reinsert it into the recording paper entrance.
Display
No feeding or multiple feeding occurs
while sending
!
If no feeding or multiple feeding occurs frequently, adjust the feeder pressure.
Green lever
Left
Shift the position of the green lever by using a
stick like instrument with a pointed end.
Right
Left: When documents do not feed.
Center:Standard position (pre-selected)
Right: When documents multi–feed.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning
Cleaning the inside of the unit!
If any of the following problems occurs, clean the inside of the unit:
—If misfeeding of your original occurs frequently.
—If a black line, a white line or a dirty pattern appears on your recording paper, on your original,
or on the fax document received by the other party.
Caution:
●
Be careful in handling the toner drum unit.
See the caution for the drum unit on page 74 for details.
●
Do not use paper products, such as paper towels or tissues, to clean the inside of the
unit.
Disconnect the power cord and the
1
2
telephone line cord.
Power cord
Telephone line cord
Front cover
Push the front cover open button then
open the front cover.
Front cover
open button
Caution:
The fuser unit gets hot.
Do not touch it.
Fuser unit
Front cover
Pull down the middle guide while holding
the front cover.
3
Middle
guide
Clean the document feeder rollers with a
cloth moistened with isopropyl rubbing
alcohol, and let all parts dry thoroughly.
Upper glass
4
Clean the upper glass with a soft dry cloth.
Lift the middle guide firmly.
5
Document feeder
rollers
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning
Remove the drum and toner unit by
holding the two tabs.
6
Drum and
toner unit
Clean the lower glass with a soft dry
cloth.
7
8
Lower glass
Reinstall the drum and toner unit by
holding the tabs.
Close the front cover, until locked, by
pushing down on both sides.
Front cover
9
Reconnect the power cord and the
telephone line cord.
10
Power cord
Telephone line cord
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacement
Replacing the toner cartridge and the drum unit!
■When the display shows the following message, replace the toner cartridge.
TONER LOW
TONER EMPTY
or
■We recommend you replace the drum unit every third time you replace the toner cartridge.
To check the drum life and quality, please print the printer test list (p. 77).
Model No. KX-FA76A toner cartridge and Model No. KX-FA77A drum unit are available for
replacement (p. 8).
Caution:
●
The drum unit contains a photosensitive drum. Exposing it to light may damage the drum.
Once you have opened the protection bag:
—Do not expose the drum unit to light for more than 5 minutes.
—Do not touch or scratch the green drum surface.
—Do not place the drum unit near dust or dirt, or in a high humidity area.
—Do not expose the drum unit to direct sunlight.
●
Do not unplug the fax machine to prevent loss of fax documents in memory.
●
Do not pour any toner into the toner cartridge.
Remove the new toner cartridge from the
protection bag. Peel off the seal from the
toner cartridge.
Seal
1
2
New toner cartridge
Front cover
Push the front cover open button then
open the front cover.
Front cover
open button
Caution:
The fuser unit gets hot.
Do not touch it.
Fuser unit
Tap on the used toner cartridge several
times to allow the remaining toner to fall
into the drum unit. Remove the drum and
toner unit by holding the two tabs.
3
Drum and
toner unit
●
If you replace the toner cartridge and the
drum unit at the same time, skip to step 6.
Turn the two levers on the used toner
cartridge firmly.
4
Levers
Used toner cartridge
Levers
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacement
Used toner cartridge
Pull up the right edge of the used toner
cartridge ( ). Remove the cartridge from
1
5
6
1
the drum unit ( ).
2
2
●
The toner may stick to the cartridge and
the drum unit. Be careful in handling.
See page 4 for details.
●
Do not drop the toner on the green drum
Drum unit
surface.
Green drum surface
●
Put the used toner cartridge into the
protection bag.
Hold here.
If you replace the drum unit at the same
time, remove the new drum unit from the
protection bag. Remove the protection bar
from the drum unit.
Protection bar
New drum unit
Red
arrows
With Panasonic face up on the toner
cartridge, match the red arrows on the
cartridge and the drum unit.
New toner
cartridge
Drum unit
Slide the tab of the toner cartridge into
the slot of the drum unit.
Tab
Slot
7
8
Hold right side of the toner cartridge
under the lip on the drum unit and...
a
turn the two levers on the toner cartridge
with firm pressure.
8
9
b
Levers
The toner cartridge is installed when the
triangles match.
Triangles
Tap on the toner cartridge several times
to allow the toner to fall into the drum unit.
Grab the tabs, and shake the drum and
toner unit horizontally several times.
10
Toner cartridge
Tabs
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacement
Install the drum and toner unit by holding
the tabs.
11
Drum and toner unit
●
If the lower glass is dirty,
clean it with a soft dry
cloth.
Lower glass
Close the front cover, until locked, by
pushing down on both sides.
Front cover
12
Waste disposal method
●
Waste material may be dumped or incinerated under
conditions which meet all country and local
environmental regulations.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed Reports
Reference lists and reports!
You can print out the following lists and reports for your reference.
Setup list: provides you with the current settings of the basic and advanced programming
features (p. 55–61).
Telephone number list: provides you with names and telephone numbers which are stored in
ONE-TOUCH DIAL and EASY DIAL.
Journal report: keeps records of fax transmission and reception. This report will be printed
automatically after every 30 fax communications (p. 35).
Broadcast programming list: provides you with items which are stored in the broadcast
feature (p. 36).
Printer test list: allows you to check the print quality of your unit. If the test print has a dirty
pattern, or blurred points or lines, clean the inside of the unit (p. 72). If printing quality is still
poor, replace the toner cartridge and drum unit.
One-touch label card: provides you with names which are stored in the ONE-TOUCH DIAL
keys (p. 22). You can put the card in the one-touch dial location.
MENU
Press
two times.
Display
MENU
1
2
PRINT REPORT
Display:
EASY DIAL
displayed.
Rotate
until the desired item is
SETUP LIST
TEL NO. LIST
JOURNAL REPORT
BROADCAST LIST
PRINTER TEST
ONE-TOUCH LABEL
EASY DIAL
SET
STOP
Press
to start printing.
SET
3
4
PRINTING
●
STOP
To stop printing, press
.
●
After printing, the printed item will be
displayed.
MENU
Press
.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Technical data about this product!
Applicable Lines:
Document Size:
Public Switched Telephone Network
Max. 216 mm (81⁄2" ) in width / Max. 600 mm (235⁄8" ) in length
Effective Scanning Width: 208 mm (83⁄16" )
Recording Paper Size:
Effective Printing Width: 202 mm (715⁄16" )
A4:
210 mm x 297 mm (81⁄4" x 1111⁄16" )
Transmission Time*:
Scanning Density:
Approx. 8 s/page (ECM-MMR)**
Horizontal: 8 pels/mm (203 pels/inch)
Vertical: 3.85 lines/mm (98 lines/inch) –STANDARD
7.7 lines/mm (196 lines/inch) –FINE/PHOTO/PHOTO
WITH TEXT
15.4 lines/mm (392 lines/inch) –SUPER FINE
64-level
Contact Image Sensor (CIS)
Halftone Level:
Scanner Type:
Printer Type:
Laser Beam Printer
Data Compression System: Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
Modem Speed:
Operating Environment:
Dimensions (H x W x D): 190 mm x 417 mm x 345 mm (71⁄2" x 162⁄5" x 133⁄5" )
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
10 °C – 32.5 °C (50 °F – 90.5 °F), 20 % – 80 % RH (Relative Humidity)
Mass (Weight):
Approx. 6.5 kg (14.3 lb.)
Power Consumption:
Standby:
Approx. 7 W
Transmission: Approx. 25 W
Reception:
Copy:
Approx. 200 W
Approx. 200 W
Maximum:
Approx. 560 W (When the fuser unit turns on)
Power Supply:
220–240 V AC, 50/60 Hz
Memory Capacity:
Approx. 120 pages of memory transmission
Approx. 170 pages of memory reception
(Based on the ITU-T No. 1 Test Chart in standard resolution.)
Laser output: Max. 5 mW
Laser diode properties:
Wave length: 760 nm – 800 nm
Emission duration: Continuous
10 ppm (pages per minute)
Print Speed:
Printing Resolution:
600 x 600 dpi
ITU-T No. 1 Test Chart
** Transmission speed depends upon the contents of the pages,
resolution, telephone line conditions and capability of the other
party’s machine.
** Transmission speed is based upon the ITU-T No. 1 Test Chart
and original mode.
If the capability of the other party’s machine is inferior to your
unit, the transmission time may be longer.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Toner life!
Model No. KX-FA76A toner cartridge can print approx. 2,000 sheets of A4 size paper with a 5%
image area. Toner life depends on the amount of content in a received, copied or printed
document. The following is the approximate relationship between image area and toner life for
Model No. KX-FA76A toner cartridge. Toner life varies in actual usage.
10% image area
15% image area
5% image area
Note:
Toner life for
KX-FA76A
●
The image area changes with the
depth, thickness and size of the
characters.
sheets 2,000
Average use
(Toner save mode is off.)
●
If you change the toner save setting
to on, the toner cartridge will last
approx. 40% longer.
1,500
1,000
500
0
5%
10%
15% Image area
Drum life
The included drum unit or Model No. KX-FA77A can print approx. 6,000 sheets of A4 size paper
regardless of the content of the image area.
Note:
●
Any details given in these instructions are subject to change without notice.
●
The pictures and illustrations in these instructions may vary slightly from the actual product.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Index!
A
Accessories . . . . . . . . . . . . . . . . . . . .8
E
EASY DIAL
(Making a voice call) . . . . . . . . . . .26
Advanced features . . . . . . . . . . .57–61
Answering machine . . . . . . . . . . . . . .44
AUTO ANSWER button . . . . .42, 43, 46
Auto Answer setting (Feature #77) . . . .61
Auto disconnection (Feature #49) . . .59
Auto reduction (Feature #37) . . . .42, 58
(Selecting characters) . . . . . . . . . .19
(Sending faxes) . . . . . . . . . . . . . .33
(Storing) . . . . . . . . . . . . . . . . . . . .23
Error correction mode (Feature #68) .60
Error messages . . . . . . . . . . . . . .62–64
Extension telephone . . . . . . . . . .47, 48
B
C
Basic features . . . . . . . . . . . . . . .55, 56
Black list (Feature #27) . . . . . . . .50, 58
BROADCAST keys . . . . . . . . . . .36, 39
Broadcast sending report . . . . . . . . .39
Broadcast transmission . . . . . . . . . . .36
F
Facsimile telephone number
(Feature #03) . . . . . . . . . . . . . . . .20
Fax activation code
(Feature #41) . . . . . . . . . .45, 48, 59
Fax auto redial . . . . . . . . . . . . . . . . .33
FAX ONLY mode . . . . . . . . . . . . . . . .43
Fax receiving . . . . . . . . . . . . . . . .40, 41
Fax ring count (Feature #06) . . . . . . .55
Feeder pressure . . . . . . . . . . . . . . . .71
Friendly reception (Feature #46) .42, 59
Caller ID
(Calling back) . . . . . . . . . . . . . . . .28
(Storing into directory) . . . . . . . . .30
Caller ID list (Feature #26) . . . . . .29, 57
CALLER ID PRINT button . . . . . . . . .29
CALLER ID SEARCH button . . . .28, 30
Character table . . . . . . . . . . . . . . . . .19
Cleaning . . . . . . . . . . . . . . . . . . . . . .72
COLLATE button . . . . . . . . . . . . . . . .53
Communication messages . . . . . . . .62
Connecting tone (Feature #76) . . . . .60
Connections . . . . . . . . . . . . . . . .16, 48
Copy . . . . . . . . . . . . . . . . . . . . . . . . .52
Copy reduction/enlargement . . . . . . .53
COPY ZOOM button . . . . . . . . . . . . .53
H
HELP button . . . . . . . . . . . . . . . . . . . .9
Hyphen button . . . . . . . . . . . . . . . . .19
I
Insert button . . . . . . . . . . . . . . . . . . .19
J
Jams . . . . . . . . . . . . . . . . . . . . . .69–71
Journal report (Feature #22) . . . .35, 57
L
List
(Broadcast programming) . . . . . . .77
(Broadcast sending) . . . . . . . . . . .39
(Journal) . . . . . . . . . . . . . . . . .35, 77
(One-touch label) . . . . . . . . . .22, 77
(Printer test) . . . . . . . . . . . . . . . . .77
(Sending) . . . . . . . . . . . . . . . . . . .35
(Setup) . . . . . . . . . . . . . . . . . . . . .77
(Telephone number) . . . . . . . . . . .77
Logo (Feature #02) . . . . . . . . . . . . . .18
LOWER key . . . . . . . . . . . . .22, 26, 33
D
Date and time (Feature #01) . . . . . . .17
Delayed transmission (Feature #25) . .57
Delete button . . . . . . . . . . . . . . . . . .19
Dialing mode (Feature #13) . . . . . . . .56
DIRECTORY PROGRAM button .22, 23
Display
(Contrast)(Feature #39) . . . . . . . .58
(Error messages) . . . . . . . . . .63, 64
Document jam . . . . . . . . . . . . . . . . . .69
Document size . . . . . . . . . . . . . . . . .34
Document stacker . . . . . . . . . . . . . . .14
Drum life . . . . . . . . . . . . . . . . . . . . .79
Drum unit . . . . . . . . . . . . . . . . . .12, 74
Duplex ring service
M
N
MANUAL BROAD button . . . . . . . . . .36
Melody ring (Feature #17) . . . . . .21, 56
Memory reception . . . . . . . . . . . . . . .42
MONITOR button . . . . . . . . . . . . . . .32
Monitor volume . . . . . . . . . . . . . . . . .21
NAME/TEL NO. button . . . . . . . .26, 28
(Feature #31) . . . . . . . . . . . . . . . .58
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
O
One-touch dial
Specifications . . . . . . . . . . . . . . . . . .78
Storing
(Card) . . . . . . . . . . . . . . . . . .22, 77
(Making a voice call) . . . . . . . . . . .26
(Sending faxes) . . . . . . . . . . . . . .33
(Storing) . . . . . . . . . . . . . . . . . . . .22
Original mode (Feature #58) . . . . . . .59
Overseas mode (Feature #23) . . . . . .57
(Broadcast key) . . . . . . . . . . . . . .36
(EASY DIAL) . . . . . . . . . . . . . . . .23
(One-touch dial) . . . . . . . . . . . . . .22
T
TEL mode . . . . . . . . . . . . . . . . . . . . .42
TEL/FAX delayed ring count
P
Pager call (Feature #70) . . . . . . .51, 60
Paper jam . . . . . . . . . . . . . . . . . . . . .70
Paper stacker . . . . . . . . . . . . . . . . . .14
Paper tray . . . . . . . . . . . . . . . . . . . . .14
Power down report . . . . . . . . . . . . . .68
Power failure . . . . . . . . . . . . . . . . . . .68
Power supply . . . . . . . . . . . . . . . . . .78
(Feature #78) . . . . . . . . . .46, 47, 61
TEL/FAX mode . . . . . . . . . . . . . . . . .46
Toner cartridge . . . . . . . . . . . . . .12, 74
Toner life . . . . . . . . . . . . . . . . . . . . . .79
Toner save (Feature #79) . . . . . .13, 61
Transmission
(Broadcast) . . . . . . . . . . . . . . . . .39
(EASY DIAL) . . . . . . . . . . . . . . . .33
(From memory) . . . . . . . . . . . . . .32
(Manually) . . . . . . . . . . . . . . . . . .32
(One-touch dial) . . . . . . . . . . . . . .33
Q
R
QUICK SCAN START button . . . . . . .32
Receive polling . . . . . . . . . . . . . . . . .49
Receiving alert (Feature #44) . . . . . .59
Receiving setting . . . . . . . . . . . . .40, 41
Recording paper . . . . . . . . . . . . . . . .15
Recording paper size . . . . . . . . . . . .78
REDIAL button . . . . . . . . . . . . . . . . .32
Remote activation ID (Feature #12) . .56
Report
V
Voice contact . . . . . . . . . . . . . . . . . .31
VOLUME button . . . . . . . . . . . . . . . .21
(Broadcast sending) . . . . . . . . . . .39
(Journal) . . . . . . . . . . . . . . . . .35, 77
(Sending) . . . . . . . . . . . . . . . . . . .35
Reset (Feature #80) . . . . . . . . . . . . .61
RESOLUTION button . . . . . . . . .32, 52
Ring count
(FAX ONLY)(Feature #06) . . . . . .55
(Silent fax)(Feature #30) . . . . . . . .58
(TEL/FAX)(Feature #78) . . . . . . . .61
Ring detection (Feature #31) . . . . . . .58
Ringer volume . . . . . . . . . . . . . . . . . .21
S
Sending
(Broadcast) . . . . . . . . . . . . . . . . .39
(EASY DIAL) . . . . . . . . . . . . . . . .33
(From memory) . . . . . . . . . . . . . .32
(Manually) . . . . . . . . . . . . . . . . . .32
(One-touch dial) . . . . . . . . . . . . . .33
Sending report (Feature #04) . . . .35, 55
Set default (Feature #80) . . . . . . . . .61
Silent fax recognition ring
(Feature #30) . . . . . . . . . .46, 47, 58
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Kyushu Matsushita Electric Co., Ltd.
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|