Panasonic Digital Camera DMC FT2 User Manual

Basic Operating Instructions  
Digital Camera  
Model No.  
DMC-FT2  
Before use, please read these instructions completely.  
Please also refer to Operating  
Instructions (PDF format)  
recorded on the CD-ROM  
containing the Operating Instructions  
(supplied).  
You can learn about advanced operation  
methods and check the Troubleshooting.  
GN  
VQT2M46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the battery pack  
CAUTION  
Danger of explosion if battery is incorrectly replaced. Replace only with  
the same or equivalent type recommended by the manufacturer. Dispose  
of used batteries according to the manufacturer’s instructions.  
Do not heat or expose to flame.  
Do not leave the battery(ies) in an automobile exposed to direct sunlight for a  
long period of time with doors and windows closed.  
Warning  
Risk of fire, explosion and burns. Do not disassemble, heat above 60 xC  
or incinerate.  
About the battery charger  
CAUTION!  
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN  
CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS  
WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE  
HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY  
OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.  
DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH  
NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.  
DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED  
CANDLES, ON THE UNIT.  
DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY  
MANNER.  
The battery charger is in the standby condition when the AC power supply cord  
is connected. The primary circuit is always “live” as long as the power cord is  
connected to an electrical outlet.  
(ENG) VQT2M46 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cautions for Use  
Always use a genuine Panasonic AC adaptor (DMW-AC5G; optional).  
Always use a genuine Panasonic multi conversion adaptor (DMW-MCA1; optional).  
When using an AC adaptor, use the AC cable supplied with the AC adaptor.  
Do not use any other AV cables except the supplied one.  
Do not use any other cables except a genuine Panasonic HDMI mini cable  
(RP-CDHM15, RP-CDHM30; optional).  
Part numbers: RP-CDHM15 (1.5 m), RP-CDHM30 (3.0 m)  
Do not use any other USB connection cables except the supplied one.  
In the event of abnormal operation (e.g. if the unit emits smoke or an unusual  
smell), immediately stop operating the unit and consult the Panasonic  
Customer Care Centre on 132600.  
Keep the camera as far away as possible from electromagnetic  
equipment (such as microwave ovens, TVs, video games etc.).  
If you use the camera on top of or near a TV, the pictures and sound on the  
camera may be disrupted by electromagnetic wave radiation.  
Do not use the camera near cell phones because doing so may result in noise  
adversely affecting the pictures and sound.  
Recorded data may be damaged, or pictures may be distorted, by strong  
magnetic fields created by speakers or large motors.  
Electromagnetic wave radiation generated by microprocessors may adversely  
affect the camera, disturbing the pictures and sound.  
If the camera is adversely affected by electromagnetic equipment and stops  
functioning properly, turn the camera off and remove the battery or disconnect  
AC adaptor (DMW-AC5G; optional). Then reinsert the battery or reconnect AC  
adaptor and turn the camera on.  
Do not use the camera near radio transmitters or high-voltage lines.  
If you record near radio transmitters or high-voltage lines, the recorded pictures  
and sound may be adversely affected.  
-If you see this symbol-  
Information on Disposal in other Countries outside  
the European Union  
This symbol is only valid in the European Union.  
If you wish to discard this product, please contact your  
local authorities or dealer and ask for the correct  
method of disposal.  
4DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Information for Your Safety ...........................................................................2  
(Important) About the waterproof/  
dustproof and anti-shock performance of the camera...................................6  
Maintenance and waterproof performance ...................................................8  
• Using the camera underwater...............................................................12  
• Causes of water leak ............................................................................13  
• Caring of the camera after using it underwater.....................................14  
Standard Accessories .................................................................................16  
Names of the Components .........................................................................17  
Charging the Battery ...................................................................................19  
About the Built-in Memory/the Card............................................................21  
Inserting and Removing the Card (optional)/the Battery.............................22  
Setting Date/Time (Clock Set).....................................................................23  
• Changing the clock setting....................................................................23  
Setting the Menu.........................................................................................24  
Selecting the [REC] Mode...........................................................................25  
Taking pictures using the automatic function  
(ñ: Intelligent Auto Mode).........................................................................26  
• Scene detection ....................................................................................27  
• AF Tracking Function............................................................................27  
Recording Motion Picture............................................................................28  
Playing back Pictures ([NORMAL PLAY])...................................................29  
Deleting Pictures.........................................................................................29  
Reading the Operating Instructions  
(PDF format) ...............................................................................................30  
Specifications..............................................................................................32  
(ENG) VQT2M46 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(Important) About the waterproof/  
dustproof and anti-shock performance of  
the camera  
Please observe the following precautions, and avoid using this camera in any  
situation where the camera is subject to high water pressure. This camera’s  
waterproof/dustproof rating complies with the “IPX8” and “IP6X” ratings.  
Provided the care and maintenance guidelines described in this document are  
strictly followed, this camera can operate underwater, to a depth not exceeding  
¢1  
10 m for a time not exceeding 60 minutes.  
This camera also complies with “MIL-STD 810F (Method 516.5-Shock)”. The  
camera has cleared a drop test from a height of 2 m onto 3 cm thick plywood. In  
most cases this camera should not sustain any damage if dropped from a height  
¢2  
not exceeding 2 m.  
Supplied accessories are not waterproof (excluding hand strap/silicon jacket).  
¢1 This means that the camera can be used underwater for specified time in  
specified pressure in accordance with the handling method established by  
Panasonic. This does not guarantee no destruction, no malfunction, or  
waterproofing in all conditions.  
¢2 This does not guarantee no destruction, no malfunction, or waterproofing in all  
conditions.  
Observe the following precautions and avoid using under water pressure  
exceeding the guaranteed performance, and in an environment with  
excessive dust or sand.  
Waterproofing is not guaranteed if the unit is subject to an impact as a result  
of being hit or dropped etc.  
If an impact to the camera occurs, it should be inspected (subject to a fee) by  
a Panasonic’s service centre to verify that the waterproofing is still effective.  
Any malfunction caused by customer misuse, or mishandling will not be  
covered by the warranty.  
Note  
The picture can become whitish if there is dirt e.g. fingerprints on the lens.  
When it is dirty, lightly wipe the surface of the lens with soft and dry cloth.  
6DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
Handling of the camera  
Do not leave the camera for a long period of time in places where temperature is  
very low (ski resort etc.) or very high (above 40 oC), inside a car under strong  
sunlight, close to a heater, on the beach, etc. Waterproof performance may be  
degraded.  
The inside of this unit is not waterproof. Do not open or close the card/battery  
door or terminal cover close to the water by the sea, a lake or river, or with wet  
hands.  
Waterproof function of the camera is for sea water and fresh water only.  
Operation may not be possible when snow or water on the zoom lever, mode  
dial or camera [OFF/ON] button the buttons freezes at cold places like ski  
resorts etc.  
About the [PRECAUTIONS] demonstration display  
Please check beforehand to maintain the waterproof performance.  
[PRECAUTIONS] is displayed when the power is turned  
on for the first time after purchase, with the card/battery  
door completely closed.  
The [PRECAUTIONS] screen will not display the next time  
you turn on the power if you start the slide show by selecting  
[YES], and then select [END] once it has completed. Select  
[REPLAY] to see the slide show again.  
Note  
It will automatically skip to clock setting screen if [NO] is selected before the  
slide show starts.  
[PRECAUTIONS] is displayed every time the power is turned on if you exited the  
slide show using a method other than selecting [END], such as turning off the  
power while the slide show is playing.  
This can be also confirmed from [PRECAUTIONS] in the [SETUP] menu.  
(ENG) VQT2M46 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and waterproof performance  
To prevent water leaking into the camera, observe the following  
items before using it.  
Check that there is enough remaining battery power or memory in  
the card.  
Do not open or close the card/battery door or terminal cover in  
places with sand and dust, near water, or with wet hands.  
At purchase, the [LOCK] switch is in the locked state. When opening  
the card/battery door and terminal cover, first release the lock.  
Release the lock by sliding the [LOCK] switch in the direction of the arrow until  
the red area becomes visible, and open the card/battery door and terminal  
cover.  
A: [LOCK] switch (grey part)  
B: Locked state  
Red part  
C:  
D: Released state  
8DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
Confirm that there are no foreign objects on inner side of  
the card/battery door or terminal cover (B rubber seal  
and C place where rubber seal meets).  
A: Terminal cover  
B: Rubber seal  
C: Area where rubber seal  
sits  
D: Card/Battery door  
E: Hair and lint  
F: Sand and dust  
G: Crack and deformation  
H: Fluid  
If there is any crack or deformation in the rubber seal inside the card/battery  
door and terminal cover, get the camera inspected or repaired by the dealer or  
an authorised Panasonic’s service centre.  
If there is any foreign object, remove  
with attached brush.  
I: Brush (supplied)  
If there is any foreign object, such as lint, hair, sand, etc., on the  
surrounding area, water will leak within a few seconds causing  
malfunction.  
(ENG) VQT2M46 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Example of foreign object on the inner side of the card/battery door  
J: Area where rubber seal  
sits (around the card/  
battery compartment)  
K: Rubber seal site (around  
the card/battery cover)  
Example of foreign object on the inner side of the terminal cover  
L: Area where rubber seal  
sits (around the  
connection terminal)  
M: Rubber seal site (around  
the terminal cover)  
Wipe it off with a dry soft cloth if there is any liquid.  
The integrity of the rubber seals may decrease after about 1 year, with use and  
age. To avoid permanently damaging the camera the seals should be replaced  
once each year. Please contact Panasonic’s Service Centre for related costs  
and other information.  
10DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
1:With the [LOCK] switch released, close the card/  
battery door and terminal cover by pushing until you  
hear a click.  
To prevent water seeping into the camera, be careful not to trap foreign  
objects such as liquids, sand, hair or dust etc.  
Closing the door with the [LOCK] switch in the locked state may result in  
damage or leaks.  
2:Slide the [LOCK] switch in the direction of the arrow  
until the visible red portion is no longer visible and the  
switch is locked.  
If you use the camera without securely closing the door and cover, it may  
open and close of its own accord.  
Red part  
N:  
O: [LOCK] switch (grey part)  
P: Released state  
Q: Locked state  
Note  
If there is any foreign object, remove it  
with attached brush.  
Sand and dust etc. will unintentionally  
adhere to the camera by lodging in  
between the gap around the card/  
battery door or terminal cover when  
used in the following locations:  
Where sand is floating, such as in the  
sea or water etc.  
Where there is a lot of sand or dust,  
such as at the beach or in a sand box  
etc.  
To prevent unintentional opening of the card/battery door and terminal  
cover, it is recommended to use the supplied silicon jacket.  
(ENG) VQT2M46 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the camera underwater  
Use the camera underwater up to 10 m depth, water temperature from 0 oC to  
40 oC, and not longer than 60 minutes continuously.  
If there is a water or dirt on the camera, use it after wiping it off with a dry soft  
cloth and dried at well ventilated area.  
Do not open or close the card/battery door or terminal cover.  
Do not apply shock to the camera underwater. (Waterproof performance may not  
be maintained, and there is a chance of water leak.)  
Do not dive into the water holding the camera. Do not use the camera at the  
location where the water will splash strongly, such as rapid flow or waterfall.  
(Strong water pressure may be applied, and it may cause malfunction.)  
The camera will sink in the water. Take care not to drop the camera and lose it  
underwater by securely placing the hand strap around your wrist or similar  
measure.  
Do not use it in the hot water over 40 oC (in the bath or hot spring).  
When the camera is splashed with detergent, soap, hot spring, bath additive,  
sun oil, sun screen, chemical, etc., wipe it off immediately.  
Card and battery are not waterproof. Do not handle with a wet hand. Also, do not  
insert wet card or battery into the camera.  
12DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
Causes of water leak  
When the camera is used in the following conditions, a gap may occur between  
the camera and the card/battery door or terminal cover, causing water to leak  
and malfunction.  
When there are foreign objects, such as lint, hair, sand, etc., between the card/  
battery door or terminal cover and the camera.  
When the rubber seal has deteriorated.  
When the [LOCK] switch is not closed on the card/battery door and terminal  
cover.  
A: Water will leak through  
the gap formed.  
B: water  
C: Terminal cover  
D: Card/Battery door  
E: Hair and lint  
F: Sand and dust  
G: Crack and deformation  
H: Fluid  
(ENG) VQT2M46 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caring of the camera after using it underwater  
1
2
With the card/battery door and  
terminal cover closed, rinse with  
water, or if it was used in the sea,  
soak the unit in fresh water pooled  
in a shallow container for  
10 minutes or less.  
If you have attached the silicon jacket,  
be sure to rinse the camera after  
removing it.  
Leaving the camera with foreign objects or saline matter on it may cause  
damage, discolouration, corrosion, unusual odour, or deterioration.  
Wipe off the water, and dry the  
camera by standing it on a dry  
cloth in a well ventilated shaded  
area.  
3
4
Confirm there is no water on the  
camera, and open the card/battery  
door and terminal cover.  
Wipe off any water or sand inside  
the card/battery door and terminal cover with a soft dry cloth.  
14DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
This unit incorporates drain design  
This unit incorporates drain design, draining  
water in gaps in the camera [OFF/ON] button  
and zoom lever etc. As a result of this, bubbles  
may come out when you soak the unit in water,  
but it is not a malfunction.  
Example of water droplets around card/battery slot.  
A: Water droplet  
B: Battery  
C: Card  
Water droplets may attach to the card or the battery when the card/battery door  
is opened without fully drying the camera after it is used underwater or soaked in  
fresh water. Be sure to wipe off the water with a soft dry cloth in such cases.  
Do not open or close the card/battery door and terminal cover with droplets of  
water still on the camera. The water droplets may seep into the camera, causing  
condensation or failure.  
Note  
Wipe off the water and dirt on the camera with a dry soft cloth.  
Do not leave the camera uncared for more than 60 minutes after using it  
underwater. It may cause deterioration of the waterproof performance.  
After use at the seaside or under water, make sure that the card/battery door  
and terminal cover are firmly closed and soak the unit in fresh water pooled in a  
shallow container for 10 minutes or less.  
If the zoom lever, mode dial, or camera [OFF/ON] button do not move smoothly,  
it may be caused by an adhesion of foreign objects. Using in such a state may  
cause malfunctions, such as locking up, so wash off any foreign objects by  
shaking the camera in fresh water. Confirm that the zoom lever, mode dial, and  
camera [OFF/ON] button move smoothly after cleaning.  
After soaking or washing the unit, wipe off water drops with a dry soft cloth and  
dry the unit in a shaded area which is well ventilated.  
Make sure that water is completely drained from the unit after soaking in water  
by standing the unit on a dry cloth for a while.  
Do not dry the camera with hot air from dryer or similar. Waterproof performance  
will deteriorate due to deformation.  
Do not use chemicals such as benzine, thinner, alcohol, or cleanser, or soap or  
detergents.  
(ENG) VQT2M46 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Standard Accessories  
Check that all the accessories are included before using the camera.  
Product numbers correct as of January 2010. These may be subject to  
change.  
1
Battery Pack  
1
2
(Indicated as battery pack or  
battery in the text)  
Charge the battery before use.  
Battery Charger  
(Indicated as battery charger or  
charger in the text)  
AC Cable  
USB Connection Cable  
AV Cable  
CD-ROM  
Software:  
Use it to install the software to your  
PC.  
Operating Instructions  
Brush  
2
DMW-BCF10E  
K2CJ29A00002  
K1HA14CD0004  
DE-A60A  
3
4
3
4
5
6
K1HA14AD0003  
5
7
9
6
7
8
9
Silicon Jacket  
Hand Strap  
VFF0596  
VMG1932  
VGQ0D56  
10 Battery Case  
8
Supplied accessories are not waterproof  
(excluding hand strap/silicon jacket).  
Keep the Brush out of reach of children  
to prevent swallowing.  
The charger is stored inside the silicon  
jacket.  
SD Memory Card, SDHC Memory Card  
and SDXC Memory Card are indicated  
as card in the text.  
VFC4364/  
VFC4537  
10  
The card is optional.  
You can record or play back pictures  
on the built-in memory when you are  
not using a card.  
VFC4393  
Consult the dealer or your nearest  
Service Centre if you lose the supplied  
accessories. (You can purchase the  
accessories separately.)  
16DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
Names of the Components  
1
2
Flash  
1
2
3
Self-timer indicator/  
AF assist lamp/LED light  
Lens  
3
4
5
6
7
8
9
LCD monitor  
4
5
11  
Motion picture button  
[MENU/SET] button  
[DISPLAY] button  
[Q.MENU]/Delete button  
Playback button  
10  
9
10 Mode dial  
6
7 8  
11 Cursor buttons  
A: 3/Exposure compensation/Auto  
bracket/White balance fine  
adjustment  
B: 4/Macro mode/  
AF Tracking  
C: 2/Self-timer button  
D: 1/Flash setting button  
In these operating instructions, the cursor buttons are described as  
shown in the figure below or described with 3/4/2/1.  
e.g.: When you press the 4 (down) button  
or  
Press 4  
(ENG) VQT2M46 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 Speaker  
13 Microphone  
14 Zoom lever  
1213 14  
15 16  
e.g.: To make subjects appear closer  
use (Tele)  
Place your finger on the zoom lever,  
and press [T] of the zoom lever  
15 Camera [OFF/ON] button  
16 Shutter button  
17 Hand strap eyelet  
Be sure to attach the hand strap when  
using the camera to ensure that you will  
not drop it.  
17  
18  
19  
18 [HDMI] socket  
19 [AV/DIGITAL/MULTI] socket  
When using an AC adaptor, ensure that  
the Panasonic multi conversion adaptor  
(DMW-MCA1; optional) and AC adaptor  
(DMW-AC5G; optional) are used.  
20 Tripod receptacle  
When you use a tripod, make sure the  
tripod is stable when the camera is  
attached to it.  
20  
21  
21 Card/Battery door  
22 Release lever  
23 [LOCK] switch  
22 23  
18DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
Charging the Battery  
About batteries that you can use with this unit  
The battery that can be used with this unit is DMW-BCF10E.  
It has been found that counterfeit battery packs which look very similar  
to the genuine product are made available to purchase in some  
markets. Some of these battery packs are not adequately protected with  
internal protection to meet the requirements of appropriate safety  
standards. There is a possibility that these battery packs may lead to  
fire or explosion. Please be advised that we are not liable for any  
accident or failure occurring as a result of use of a counterfeit battery  
pack. To ensure that safe products are used we would recommend that  
a genuine Panasonic battery pack is used.  
Use the dedicated charger and battery.  
The camera has a function for distinguishing batteries which can be used  
safely. The dedicated battery (DMW-BCF10E) supports this function. The  
only batteries suitable for use with this unit are genuine Panasonic  
products and batteries manufactured by other companies and certified by  
Panasonic. (Batteries which do not support this function cannot be used).  
Panasonic cannot in any way guarantee the quality, performance or safety  
of batteries which have been manufactured by other companies and are  
not genuine Panasonic products.  
Charging  
The battery is not charged when the camera is shipped. Charge the battery  
before use.  
Charge the battery with the charger indoors.  
It is recommended to charge the battery in a temperature between 10 oC to  
35 oC. (The battery temperature should also be the same.)  
Attach the battery paying  
attention to the direction of the  
battery.  
Connect the AC cable.  
Disconnect the charger from the  
electrical socket and detach the battery  
after charging is completed.  
(ENG) VQT2M46 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the [CHARGE] indicator  
The [CHARGE]  
indicator turns on:  
The [CHARGE] indicator A is turned on and  
charging will start.  
The [CHARGE]  
indicator turns off:  
The [CHARGE] indicator A of the charger will turn  
off once the charging has completed without any  
problem.  
When the [CHARGE] indicator flashes  
The battery temperature is too high or too low. It is recommended to charge  
the battery again in an ambient temperature of between 10 ºC to 35 ºC.  
The terminals of the charger or the battery are dirty. In this case, wipe off the  
dirt with a dry cloth.  
Charging time  
Charging time  
Approx. 130 min  
Approximate operating time and number of recordable pictures  
Number of recordable pictures  
Recording time  
Approx. 360 pictures  
Approx. 180 min  
Approx. 300 min  
Playback time  
Recording conditions by CIPA standard  
CIPA is an abbreviation of [Camera & Imaging Products Association].  
Normal Picture Mode  
Temperature: 23 oC/Humidity: 50% when LCD monitor is on.  
Using a Panasonic SD Memory Card (32 MB).  
Using the supplied battery.  
Starting recording 30 seconds after the camera is turned on. (When the Optical  
Image Stabilizer function is set to [AUTO].)  
Recording once every 30 seconds with full flash every second recording.  
Changing the zoom magnification from Tele to Wide or vice versa in every  
recording.  
Turning the camera off every 10 recordings and leaving it until the temperature  
of the battery decreases.  
20DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
About the Built-in Memory/the Card  
Built-in Memory  
Memory size: Approx. 40 MB  
The built-in memory can be used as a temporary storage device when the card  
being used becomes full.  
The access time for the built-in memory may be longer than the access time for  
a card.  
Card  
The following cards which conform to the SD video standard can be used  
with this unit.  
(These cards are indicated as card in the text.)  
Type of card which can be used with  
Remarks  
this unit  
SD Memory Card (8 MB to 2 GB)  
SDHC Memory Cards and SDXC  
Memory Cards can be used only in  
equipment that is compatible with  
their respective formats.  
SDHC Memory Card (4 GB to 32 GB)  
Check that the PC and other  
equipment are compatible when  
using the SDXC Memory Cards.  
information/SDXC.html  
SDXC Memory Card (48 GB to 64 GB)  
Only cards bearing the SDHC logo (indicating that the card conforms to SD  
video standards) may be used as 4 GB to 32 GB cards.  
Only cards bearing the SDXC logo (indicating that the card conforms to SD  
video standards) may be used as 48 GB to 64 GB cards.  
¢
Use a card with SD Speed Class with “Class 4” or higher when recording  
motion pictures in [AVCHD Lite]. Also, use a card with SD Speed Class with  
“Class 6” or higher when recording motion pictures in [MOTION JPEG].  
¢ SD Speed Class is the speed standard regarding continuous writing.  
Please confirm the latest information on the following website.  
(This Site is English only.)  
Note  
Keep the Memory Card out of reach of children to prevent swallowing.  
(ENG) VQT2M46 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting and Removing the Card  
(optional)/the Battery  
Check that this unit is turned off.  
Confirm that there is no foreign object.  
We recommend using a Panasonic card.  
1:Slide the [LOCK] switch B, and  
release the lock.  
2:Slide the release lever A and  
open the card/battery door.  
Always use genuine Panasonic batteries  
(DMW-BCF10E).  
If you use other batteries, we cannot  
guarantee the quality of this product.  
Battery: Insert until it is locked by  
the lever C being careful about the  
direction you insert it. Pull the  
lever C in the direction of the  
arrow to remove the battery.  
Card: Push it fully until it clicks  
being careful about the direction  
you insert it. To remove the card,  
push the card until it clicks, then  
pull the card out upright.  
D:Do not touch the connection terminals of the card.  
The card may be damaged if it is not fully inserted.  
Close the card/battery door until it  
clicks, and then lock the [LOCK]  
switch by sliding it toward [2].  
22DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
Setting Date/Time (Clock Set)  
The clock is not set when the camera is shipped.  
Press the [OFF/ON] button.  
A [MENU/SET] button  
B Cursor buttons  
[PRECAUTIONS] is displayed. Be sure to check this so that you can  
maintain the waterproof performance. (P7)  
Press [MENU/SET].  
Press 2/1 to select the items (year,  
month, day, hour, minute, display  
sequence or time display format),  
and press 3/4 to set.  
: Cancel without setting the clock.  
Press [MENU/SET] to set.  
Press [MENU/SET].  
Press [] to return to the settings screen.  
Changing the clock setting  
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1.  
It can be changed in steps 3, 4 and 5 to set the clock.  
(ENG) VQT2M46 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Menu  
This section describes how to select the Normal Picture Mode settings, and  
the same setting can be used for the [PLAYBACK] menu and [SETUP] menu  
as well.  
Example: Setting [AF MODE] from [Ø] to [š] in the Normal Picture Mode  
Press [MENU/SET] to display the menu.  
Press 3  
/4 to select [AF MODE], and then  
press 1.  
Depending on the item, its setting may not appear or it  
may be displayed in a different way.  
Press 3/4 to select [š] and then press  
[MENU/SET] to set.  
Press [MENU/SET] to close the menu.  
Switching to other menus  
e.g.: Switching to the [SETUP] menu  
1
2
Press [MENU/SET] to display the menu.  
Press 2.  
3
Press 4 to select the [SETUP] menu icon  
[
].  
4
Press 1.  
Select a menu item next and set it.  
24DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
Mode switching  
Selecting the [REC] Mode  
Press the [OFF/ON] button.  
Switching the mode by rotating the  
mode dial.  
A Mode dial  
List of [REC] modes  
¦
Intelligent Auto Mode  
The subjects are recorded using settings automatically selected by the  
camera.  
!
Normal Picture Mode  
The subjects are recorded using your own settings.  
Sports mode  
Use this mode to take pictures of sporting events, etc.  
Snow mode  
This allows you to take pictures that show the snow as white as possible  
at a ski resort or a snow-covered mountain.  
Beach & Surf mode  
This mode is optimal for taking pictures up to 3 m underwater and at the  
beach.  
Û
Scene Mode  
This allows you to take pictures that match the scene being recorded.  
Clipboard Mode  
Record as a memo.  
ì
(ENG) VQT2M46 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[REC] Mode: ñ  
Taking pictures using the automatic  
function  
(ñ: Intelligent Auto Mode)  
The camera will set the most appropriate settings to match the subject and  
the recording conditions so we recommend this mode for beginners or those  
who want to leave the settings to the camera and take pictures easily.  
Set the mode dial to [ñ].  
1
Press the shutter button halfway to  
focus.  
The focus indication 1 (green) lights when  
the subject is focused.  
The AF area 2 is displayed around the  
subject’s face by the face detection function.  
In other cases, it is displayed at the point on  
the subject which is in focus.  
2
The focus range is 5 cm (Wide)/30 cm (Tele)  
to .  
Press the shutter button fully (push  
it in further), and take the picture.  
26DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
Scene detection  
When the camera identifies the optimum scene, the icon of the scene  
concerned is displayed in blue for 2 seconds, after which its colour changes  
to the usual red.  
[i-PORTRAIT]  
[i-SCENERY]  
[i-MACRO]  
>
¦
Only when [  
] is selected  
[i-NIGHT PORTRAIT]  
[i-NIGHT SCENERY]  
[i-SUNSET]  
[i-BABY]  
[¦] is set if none of the scenes are applicable, and the standard settings are  
set.  
When [ ], [ ] or [ ] is selected, the camera automatically detects a person’s  
face, and it will adjust the focus and exposure. (Face Detection)  
AF Tracking Function  
It is possible to set the focus to the specified subject. Focus will keep  
following the subject automatically even if it moves.  
1
Press 3.  
[  
] is displayed in the upper left of the screen.  
AF Tracking frame is displayed in the centre of  
the screen.  
Press 3 again to cancel.  
2
Bring the subject to the AF tracking frame,  
and press 4 to lock the subject.  
AF tracking frame will turn yellow.  
An optimum scene for the specified subject will  
be chosen.  
Press 3 to cancel.  
(ENG) VQT2M46 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[REC] Mode: ñ·  
¿
Recording Motion Picture  
This can record high definition motion pictures compatible with the AVCHD  
format or motion pictures recorded in Motion JPEG.  
Audio will be recorded in monaural.  
Select the mode.  
A Mode dial  
B Motion picture button  
A
Start recording by pressing the  
motion picture button.  
A
B
Available recording time  
Elapsed recording time  
Release the motion picture button right after  
you press it.  
The recording state indicator (red) C will  
flash while recording motion pictures.  
B
C
Stop the recording by pressing the motion picture button  
again.  
If the built-in memory or the card becomes full in the middle of recording,  
the camera stops recording automatically.  
Note  
Motion picture recorded continuously in [MOTION JPEG] is up to 2 GB. Only the  
maximum recordable time for 2 GB is displayed on the screen.  
Maximum time to record motion pictures continuously with [AVCHD Lite] is  
13 hours 3 minutes 20 seconds. Screen will only display up to 13 hours  
3 minutes 20 seconds. However, the recording may stop before that depending  
on the remaining battery level.  
28DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
[PLAYBACK] Mode: ¸  
Playing back Pictures ([NORMAL PLAY])  
Press [(].  
A [(] button  
Normal playback is displayed automatically  
when the power is turned on by pressing and  
holding the [(] button.  
Press 2/1 to select the picture.  
After selecting the motion picture, press 3 to  
start playback.  
[PLAYBACK] Mode: ¸  
Deleting Pictures  
Once deleted, pictures cannot be recovered.  
Pictures on the built-in memory or the card, that are being played back will be  
deleted.  
Select the picture to be deleted, and  
then press [].  
A [] button  
Press 2 to select [YES] and then  
press [MENU/SET].  
(ENG) VQT2M46 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reading the Operating Instructions  
(PDF format)  
You have practised the basic operations introduced in these operating  
instructions and want to progress to advanced operations.  
You want to check the Troubleshooting.  
In these kinds of situations refer to Operating Instructions (PDF format) recorded  
on the CD-ROM containing the Operating Instructions (supplied).  
For Windows  
Turn the PC on and insert the CD-ROM containing the  
Operating Instructions (supplied).  
Click the [Operating  
Instructions].  
Select the desired language  
and then click [Operating  
Instructions] to install.  
A To return to the install menu.  
Double click the “Operating  
Instructions” shortcut icon on  
the desktop.  
30DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
When the Operating Instructions (PDF format) will not open  
You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to  
browse or print the Operating Instructions (PDF format).  
Insert the CD-ROM containing the Operating Instructions (supplied), click B and  
then follow the messages on the screen to install.  
(Compatible OS: Windows 2000 SP4/Windows XP SP2 or SP3/Windows Vista  
SP1 or SP2/Windows 7)  
You can download and install a version of Adobe Reader that you can use with  
your OS from the following Web Site.  
To uninstall the Operating Instructions (PDF format)  
Delete the PDF file from the “Program Files\Panasonic\Lumix\” folder.  
When the contents in the Program Files folder cannot be displayed, click the  
[Show the contents of this folder] to display them.  
For Macintosh  
Turn the PC on and insert the CD-ROM containing the  
Operating Instructions (supplied).  
Open the “Manual” folder in the CD-ROM and then copy  
the PDF file with the desired language inside the folder.  
Double click the PDF file to open it.  
(ENG) VQT2M46 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Digital Camera:  
Information for your safety  
Power Source:  
DC 5.1 V  
Power  
Consumption:  
1.2 W (When recording)  
0.7 W (When playing back)  
Camera effective  
pixels  
:
14,100,000 pixels  
Image sensor:  
1/2.33q CCD, total pixel number 14,500,000 pixels,  
Primary colour filter  
Lens:  
Optical 4.6kzoom, fl4.9 mm to 22.8 mm (35 mm film  
camera equivalent: 28 mm to 128 mm)/F3.3 to F5.9  
Max. 4k  
Digital zoom:  
Extra optical zoom: Max. 9.8k  
Focus range:  
Normal: 30 cm to ¶  
Macro/Intelligent auto/Clipboard mode:  
5 cm (Wide)/30 cm (Tele) to ¶  
Scene mode: There may be differences in the above  
settings.  
Shutter system:  
Burst recording  
Burst speed:  
Number of  
Electronic shutteriMechanical shutter  
Approx. 1.8 pictures/second  
recordable  
pictures:  
Max. 5 pictures (Standard), max. 3 pictures (Fine).  
32DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
Hi-speed burst  
Burst speed:  
Approx. 10 pictures/second (Speed priority)  
Approx. 5 pictures/second (Image priority)  
[3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the  
picture size.]  
Number of  
recordable  
pictures:  
When using the built-in memory:  
Approx. 15 pictures (immediately after formatting)  
When using a Card: Max. 100 pictures (differs  
depending on the type of Card and the recording  
conditions)  
Shutter speed:  
Exposure (AE):  
8 seconds to 1/1300th of a second  
[STARRY SKY] mode: 15 seconds, 30 seconds,  
60 seconds  
Programme AE  
Exposure compensation (1/3 EV Step, j2 EV to  
i2 EV)  
Metering mode:  
LCD monitor:  
Multiple  
2.7q TFT LCD  
(Approx. 230,000 dots) (field of view ratio about 100%)  
Flash range: [ISO AUTO]  
Approx. 30 cm to 5.1 m (Wide)  
Monaural  
Flash:  
Microphone:  
Speaker:  
Monaural  
Recording media: Built-in Memory (Approx. 40 MB)/SD Memory Card/  
SDHC Memory Card/SDXC Memory Card  
Recording file  
format  
Still Picture:  
JPEG (based on “Design rule for Camera File system”,  
based on “Exif 2.21” standard)/DPOF corresponding  
Pictures with  
audio:  
JPEG (based on “Design rule for Camera File system”,  
based on “Exif 2.21” standard)r“QuickTime”  
Motion pictures  
with audio:  
AVCHD Lite/QuickTime Motion JPEG  
(ENG) VQT2M46 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Interface  
Digital:  
“USB 2.0” (High Speed)  
Analogue video/  
audio:  
NTSC/PAL Composite (Switched by menu),  
Audio line output (monaural)  
Terminal  
[AV/DIGITAL/  
MULTI]:  
Dedicated jack (14 pin)  
[HDMI]:  
MiniHDMI TypeC  
Dimensions:  
Approx. 99.3 mm (W)k63.1 mm (H)k24.3 mm (D)  
(excluding the projecting parts)  
Approx. 188 g (with card and battery)  
Approx. 167 g (excluding card and battery)  
Mass:  
Operating  
temperature:  
¢
j10 oC to 40 oC  
¢
The performance of the battery (number of recordable  
pictures/operating time) may decrease temporarily  
when using the camera in a temperature between  
j10 oC to 0 oC (at the cold climate such as ski  
resorts).  
Operating humidity:10% to 80%  
Waterproof  
performance:  
Equivalent to IEC 60529 “IPX8”.  
(Usable for 60 minutes in 10 m water depth)  
Crash resistance  
perfomance:  
The camera has cleared a single unit drop test from a  
height of 2 m onto 3 cm plywood, which is compliant  
with “MIL-STD 810F Method 516.5-Shock”.  
Dustproof  
performance:  
Equivalent to IEC 60529 “IP6X”.  
34DVoQwTn2lMo4a6d(EfrNoGm) Www.Somanuals.com. All Manuals Search And Download.  
Battery Charger  
(Panasonic  
DE-A60A):  
Information for your safety  
Input:  
110 V to 240 V 50/60 Hz, 0.2 A  
4.2 V 0.65 A (Battery charging)  
Output:  
Operating  
temperature:  
¢
0 oC to 40 oC  
¢
The battery cannot be recharged in a temperature  
less than 0 oC. (The [CHARGE] indicator blinks  
when the battery cannot be recharged.)  
Battery Pack  
(lithium-ion)  
(Panasonic  
DMW-BCF10E):  
Information for your safety  
3.6 V/940 mAh  
Voltage/capacity:  
(ENG) VQT2M46 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SDXC Logo is a trademark of SD-3C, LLC.  
The “AVCHD”, “AVCHD Lite” and the “AVCHD”, “AVCHD Lite” logo are  
trademarks of Panasonic Corporation and Sony Corporation.  
Manufactured under license from Dolby Laboratories.  
Dolby and the double-D symbol are trademarks of Dolby Laboratories.  
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are  
trademarks or registered trademarks of HDMI Licensing LLC in the United  
States and other countries.  
HDAVI Control™ is a trademark of Panasonic Corporation.  
QuickTime and the QuickTime logo are trademarks or registered trademarks  
of Apple Inc., used under license therefrom.  
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.  
Other names, company names, and product names printed in these instructions  
are trademarks or registered trademarks of the companies concerned.  
This product is licensed under the AVC patent portfolio license for the personal  
and non-commercial use of a consumer to (i) encode video in compliance with  
the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was  
encoded by a consumer engaged in a personal and non-commercial activity  
and/or was obtained from a video provider licensed to provide AVC Video. No  
license is granted or shall be implied for any other use. Additional information  
A
Panasonic Corporation  
VQT2M46  
F0210KD0 ( 10000 )  
Panasonic Corporation 2010  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee DVD Player 2320 20 User Manual
Milwaukee Impact Driver CP8730 User Manual
NAD CD Player C541 User Manual
NEC Projection Television NC800C User Manual
Nintendo Video Games 45496734992 User Manual
Oki Printer C810 User Manual
Optimus Cassette Player CTR 108 User Manual
Panasonic Car Stereo System CF P2 User Manual
Panasonic Impact Driver EYFLA4A User Manual
Parasound Stereo Amplifier P SP 1500 User Manual