Operating Instructions
Link-to-Cell Cellular Convergence Solution
Model No. KX-TG7731
KX-TG7732
KX-TG7733
KX-TG254SK
KX-TG294SK
KX-TG7741
KX-TG7742
KX-TG7743
KX-TG263SK
KX-TG273SK
KX-TG7745
Model shown is KX-TG7731.
Before initial use, see “Getting Started”
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte “Guía Rápida Española”, página 73.
in the U.S.A. or Puerto Rico.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Model composition
n KX-TG7731 series
n KX-TG7741 series
R Model shown is KX-TG7732.
R Model shown is KX-TG7742.
n KX-TG273SK
Base unit
Handset
Series
Model No.
Part No.
Part No.
Quantity
KX-TG7731 series
KX-TG7731
KX-TG7732
KX-TG7733
KX-TG254SK
KX-TG294SK
KX-TG7741
KX-TG7742
KX-TG7743
KX-TG263SK
KX-TG273SK
KX-TG7745
KX-TG7731
KX-TG7731
KX-TG7731
KX-TG7731
KX-TG7731
KX-TG7741
KX-TG7741
KX-TG7741
KX-TG7741
KX-TG7741
KX-TG7741
KX-TGA470
KX-TGA470
KX-TGA470
KX-TGA470
KX-TGA470
KX-TGA470
KX-TGA470
KX-TGA470
KX-TGA470
KX-TGA470
KX-TGA470
1
2
3
4
4
1
2
3
3
3
5
KX-TG7741 series
*1
*1 A range extender (KX-TGA405) is supplied in this model. By installing this unit, you can
extend the range of your phone system to include areas where reception was previously not
available. Read the installation guide for the range extender.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Introduction
Feature differences
*1
Intercom
Series
Base unit keypad/sp-phone
*2
«
KX-TG7731 series
KX-TG7741 series
–
–
registering one or more optional handsets (page 5).
*2 Intercom calls can be made between the base unit and handset.
Accessory information
Supplied accessories
*1
*2
*3
*4
*5
Supplied handset qty.
1 unit
2 units
3 units
4 units
5 units
No.
Accessory item/
Order number
Accessory quantity
A
B
C
D
E
F
G
AC adaptor/
PNLV226Z
1
1
1
2
1
1
–
2
1
1
4
2
2
1
3
1
1
6
3
3
2
4
1
1
8
4
4
3
5
1
Telephone line cord/
PQJA10075Z
Wall mounting adaptor/
PNKL1001Y1
1
Rechargeable batteries/
HHR-4DPA
10
5
*6
Handset cover
PNYNTGA470BR
/
Belt clip/
PNKE1132Z1
5
*7
4
Charger
*1 KX-TG7731/KX-TG7741
*2 KX-TG7732/KX-TG7742
*3 KX-TG7733/KX-TG7743/KX-TG263SK/KX-TG273SK
*4 KX-TG254SK/KX-TG294SK
*5 KX-TG7745
*6 The handset cover comes attached to the handset.
*7 PNLC1029ZS: Silver, PNLC1029ZM: Metallic gray
n For KX-TG273SK
No. Accessory item/Order number
Quantity
H
Range extender/KX-TGA405
1
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Introduction
No. Accessory item/Order number
Quantity
I
AC adaptor for range extender/PQLV219Y
1
AI
B
C
D
E
F
G
H
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 82).
Accessory item
Order number
*1
Rechargeable
batteries
HHR-4DPA
R To order, please call 1-800-332-5368 or visit
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
Headset
KX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430
KX-J66
T-adaptor
*2
Range extender
KX-TGA405
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
*2 By installing this unit, you can extend the range of your phone system to include areas
where reception was previously not available. This product can be purchased online. Please
visit our Web site:
Expanding your phone system
Handset (optional): KX-TGA470
You can expand your phone system by
registering optional handsets (6 max.) to a
single base unit.
R Optional handsets may be a different color
from that of the supplied handsets.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Introduction
®
Bluetooth devices
You can expand your phone system by registering the following units to a single base unit.
*1
(for cellular calls: page 18)
*1
Your Bluetooth headset : 1 max.
(for a wireless hands-free conversation: page 47)
*1 Your cellular phone and headset must be Bluetooth wireless technology compatible. For
more details and the list of compatible cellular phones, please visit our Web site:
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Important Information
R Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
Operating safeguards
R Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
WARNING
Power connection
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
Medical
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of
1.92 GHz to 1.93 GHz, and the RF
transmission power is 115 mW (max.).)
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact
the Panasonic Call Center at
1-800-211-PANA (1-800-211-7262).
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
CAUTION
Installation and location
R Never touch the plug with wet hands.
Danger of electric shock exists.
R Never install telephone wiring during an
electrical storm.
R Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
R Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
R Use caution when installing or modifying
telephone lines.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
Installation
R To prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
R This product is unable to make calls when:
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Important Information
– the handset batteries need recharging or
have failed.
– there is a power failure.
Important safety
instructions
Battery
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
on page 5. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
R Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
R Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
For best performance
Base unit location/avoiding noise
Attention:
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
R For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to
recycle this battery.
R Coverage and voice quality depends on the
local environmental conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Important Information
R If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.
Notice for product disposal, transfer,
or return
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Environment
R Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
Notice
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.
R The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
R Wipe the outer surface of the product
with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
ENERGY STAR
®
As an ENERGY STAR Partner, Panasonic
has determined that this product meets the
ENERGY STAR guidelines for energy
efficiency. ENERGY STAR is a U.S.
registered mark.
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Important Information
Specifications
R Standard:
DECT 6.0 (Digital Enhanced Cordless
Telecommunications 6.0)
Bluetooth wireless technology 2.0
R Frequency range:
1.92 GHz to 1.93 GHz (DECT)
2.402 GHz to 2.48 GHz (Bluetooth)
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
Base unit:
Standby: Approx. 1.2 W
Maximum: Approx. 4.5 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 2.0 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
Note:
R Design and specifications are subject to
change without notice.
R The illustrations in these instructions may
vary slightly from the actual product.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Getting Started
n Charger
Setting up
Connections
R Use only the supplied Panasonic AC
adaptor PNLV226.
Hooks
R If you do not connect the telephone line
cord and use only cellular lines, set the
conveniently (page 20).
To power outlet
n Base unit
Press plug firmly.
“Click”
Battery installation
R USE ONLY Ni-MH batteries AAA (R03)
size.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
,
).
Hook
To power outlet
“Click”
To single-line
telephone jack
(RJ11C)
Rechargeable Ni-MH ONLY
DSL/ADSL filter*
Incorrect
Correct
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
displayed, see page 17.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Getting Started
R Avoid touching the battery ends (
the unit contacts.
,
) or
Battery charging
Charge for about 7 hours.
R When the batteries are fully charged,
“Fully charged” is displayed.
Note for battery charging
R It is normal for the handset to feel warm
during charging.
Confirm “Charging” is displayed.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
Battery level
Icon
Battery level
High
Medium
Low
Note when setting up
Needs charging.
Note for connections
Empty
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
Panasonic Ni-MH battery
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
performance (supplied batteries)
Operation
Operating time
*1
In continuous use
Not in use (standby)
13 hours max.
*1
11 days max.
*1 If Eco mode is on.
During a power failure
R The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC adaptor)
to the same telephone line or to the same
T-adaptor (page 5).
Note:
R Actual battery performance depends on
usage and ambient environment.
R Even after the batteries are fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
R The battery level may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and let it charge for at least
7 hours.
Note for battery installation
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
page 5, 8.
R Wipe the battery ends (
,
) with a dry
cloth.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Getting Started
Intelligent eco mode
Controls
This feature automatically reduces handset
power consumption by suppressing handset
transmission power when the handset is close
to the base unit.
Base unit
n KX-TG7731 series (page 3)
D
R When this feature is activated,
is
A
B
C
E
displayed. However, during a cellular call,
is not displayed even though this
feature is activated.
booster is activated (page 24).
F
G
H
I
J
K
L
Charge contacts
Speaker
HEADSET indicator
Message counter
MERASEN
CELL 1 indicator
CELL 2 indicator
MnN (STOP)
MjN/MkN (VOL.: Volume up/down)
M
M
N/M N (Repeat/Skip)
N (PLAY)
Message indicator
MLOCATORN
MANSWER ON/OFFN
ANSWER ON/OFF indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Getting Started
MCELL 2N
CELL 2 indicator
Message counter
n KX-TG7741 series (page 3)
G
C
D
E
F
Dial keypad (*: TONE)
H
I
J
Microphone
Handset
K
L
A
A
B
H
I
M
N
O
P
B
C
J
K
D
E
Q
R
Charge contacts
Speaker
F
G
MHOLDN MCONFN (Conference)
MREDIALN MPAUSEN
L
MFLASHN MCALL WAITN
MSP-PHONEN (Speakerphone)
SP-PHONE indicator
M
MERASEN MMUTEN
A
B
MANSWER ON/OFFN
ANSWER ON/OFF indicator
MLOCATORN MINTERCOMN
MnN (STOP)
M
N (PLAY)
Message indicator
MjN/MkN (VOL.: Volume up/down)
N/M N (Repeat/Skip)
Ringer indicator
Message indicator
Speaker
M
MjN/MkN (VOL.: Volume up/down)
MHEADSETN
M
M
N (SP-PHONE: Speakerphone)
HEADSET indicator
MCELL 1N
N (TALK)
CELL 1 indicator
Headset jack
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Getting Started
Dial keypad (*: TONE)
Receiver
Display/Indicators
Display
Handset display items
MCALL WAITN MFLASHN
MOFFN
Item
Meaning
Within base unit range
Out of base unit range
Microphone
Charge contacts
n Control type
The landline is in use.
R When flashing:
Soft keys
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
The handset features 3 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
Navigator key
MDN, MCN, MFN, or MEN: Scroll through
various lists and items.
(Volume: MDN or MCN): Adjust the
receiver or speaker volume while talking.
MFN CID (Caller ID): View the caller list.
MEN REDIAL: View the redial list.
A cellular line is in use.
R When flashing:
The cellular call is put on
hold.
R When flashing rapidly:
A cellular call is being
received.
–
–
–
–
1
connected. Ready to make/
*1
receive cellular calls.
R When turned off:
A cellular phone is not
(page 20).
Belt clip
n To attach
n To remove
– The cellular line is selected
for the ringer setting.
– A cellular call is being
received on that line.
*2
Eco mode is on. (page 13)
Equalizer is set. (page 24)
(page 22)
*3
(page 35, 37)
Silent mode is on. (page 40)
(page 38)
Alarm is on. (page 40)
Handset number
Battery level
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Getting Started
Item
Meaning
Status
Meaning
Blocked call (page 41)
Green
(Flashing
rapidly)
A cellular call is being
received.
*2
(page 24)
Amber
(On)
A cellular phone is not
(page 20).
In use
Answering system is being
used by another handset or
the base unit.
Amber
(Flashing
rapidly)
The base unit is searching for
the registered cellular phone.
Cell1 in
use
Someone is using the cellular
line.
Cell2 in
use
Red
(Flashing)
– The base unit is registering
a cellular phone.
Line in
use
Someone is using the landline.
– A cellular call is put on hold.
Light off
A cellular phone is not
registered to the base unit.
*1 Corresponding cellular line(s) is indicated
next to the item.
HEADSET indicator on the base unit
*2 During a cellular call, the item is not
displayed even though the feature is
activated.
*3 Corresponding lines (1, 2: cellular line, L:
landline) are indicated next to the item. If
all lines are turned off, no line is indicated.
The HEADSET indicator shows the Bluetooth
headset status.
Status
Meaning
Green
(On)
A Bluetooth headset is
connected to the base unit.
Ready to use it.
Base unit display item
Green
A Bluetooth headset is in use.
Item
Meaning
(Flashing)
“Greeting only” is selected
as the caller’s recording time.
In this case, the answering
system answers calls with a
greeting message and caller
(page 53)
Green
(Flashing
rapidly)
A landline call is being
received.
Amber
(On)
The Bluetooth headset is not
connected to the base unit.
Amber
The base unit is searching for
the registered Bluetooth
headset.
(Flashing
rapidly)
CELL 1/CELL 2 indicators on the
base unit
Red
(Flashing)
– The base unit is registering
a headset.
– Mute is turned on.
The CELL 1/CELL 2 indicators show each
cellular line status.
Light off
A Bluetooth headset is not
registered to the base unit.
Status
Meaning
Green
(On)
A cellular phone is connected.
Ready to make/receive
cellular calls.
Green
(Flashing)
– The cellular line is in use.
– Phonebook entries are
being copied from a
cellular phone (page 46).
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Getting Started
Display language
You can select either “English” or
“Español” as the display language. The
default setting is “English”.
Initial settings
n Direct command code:
Programmable settings can be accessed by
pressing MMENUN, # and then the
(page 33).
1
2
MMENUN#110
MbN: Select the desired setting. a
MSAVEN
Example: Press MMENUN#101.
3
MOFFN
n Symbol meaning:
Symbol
Meaning
Voice guidance language
Example:
Press MCN or MDN to select
MbN: “Off”
the words in quotations.
You can select either “English” or
“Español” as the voice guidance language
of the answering system. The default setting is
“English”.
Date and time
Important:
1
2
MMENUN#112
R When you install the batteries for the first
time, the handset may prompt you to set
proceed to step 2.
MbN: Select the desired setting. a
MSAVEN
3
MOFFN
1
2
MMENUN#101
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
Enter the current month, date, and year
by selecting 2 digits for each.
Example: July 15, 2012
07 15 12
3
4
MOKN
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
1
2
3
MMENUN#120
MbN: Select the desired setting.
MSAVEN a MOFFN
5
6
MAM/PMN: Select “AM” or “PM”.
MSAVEN a MOFFN
Note:
R When English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Link to Cell
R Before registering a Bluetooth enabled
cellular phone to the base unit:
(page 21).
– make sure that no Bluetooth device such
as a Bluetooth headset is connected to
your cellular phone.
Link to cell feature
To use this feature, you must first register and
(page 18).
Your cellular phones must have Bluetooth
wireless technology that is compatible with this
product.
1
2
3
Handset:
MMENUN
This feature allows you to:
– make or answer cellular calls using your
home phone (handset or base unit) with
better reception.
– maximize the benefits of cellular services
(such as free night and weekend calls, or
cellular to cellular call plans) by utilizing
unused peak minutes with your home
phone.
– conserve the battery power of your cellular
phone while the unit is on a cellular call.
(We recommend charging your cellular
phone during the cellular call as your
cellular phone battery is being consumed.)
For CELL 1: #6241
For CELL 2: #6242
R After the CELL 1 or CELL 2 indicator
on the base unit starts flashing red, the
rest of the procedure must be
completed within 5 minutes.
Your cellular phone:
While the CELL 1 or CELL 2 indicator is
flashing red, follow the instructions of your
cellular phone to enter the registration
mode.
R Depending on your cellular phone, it
may ask you to enter the base unit PIN
(default: “0000”).
Important:
R Up to 2 cellular phones can be registered.
However, only one Bluetooth device
(cellular phone or headset) can be
Handset:
Wait until a long beep sounds.
R It may take more than 10 seconds to
complete registration.
connected to the base unit at a time.
R Locate your cellular phone near the base
unit. If the cellular phone is too close to the
base unit during a cellular call, you may
hear noise. For best performance, we
recommend placing the cellular phone
between 0.6 m to 3 m (2 feet to 10 feet)
away from the base unit.
R When the CELL 1 or CELL 2 indicator
lights green, the cellular phone is
connected to the base unit. You are
ready to make cellular calls.
4
5
To select which unit receives calls for the
R If not required, go to step 5.
Trademarks
R The Bluetooth word mark and logos are
®
owned by the Bluetooth SIG, Inc. and any
use of such marks by Panasonic
Corporation is under license. All other
trademarks identified herein are the
property of their respective owners.
MOFFN
Note:
R Make sure that your cellular phone is set to
connect to this product automatically. Refer
to your cellular phone’s operating
instructions.
R Make sure you cancel your cellular phone’s
to the other line (page 21).
Registering a cellular
phone
Important:
R For more details and the list of compatible
cellular phones, please visit our Web site:
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Link to Cell
Important:
R To use this feature, your cellular phone
must support Bluetooth in-band ringtone.
Refer to your cellular phone’s operating
instructions.
Link to cell settings
Selecting which unit receives
cellular calls
You can select which unit rings and receives
calls for a cellular line. When “All” is
1
2
MMENUN
For CELL 1: #6141
For CELL 2: #6142
selected, all handsets and the base unit ring.
3
4
MbN: Select the desired setting.
1
2
MMENUN
MSAVEN a MOFFN
For CELL 1: #6271
For CELL 2: #6272
Note:
(page 37) instead of your cellular phone’s
ringer tone when a cellular call is being
received if:
– your cellular phone is in silent mode
(depending on your cellular phone).
– the base unit is in use.
– 2 handsets are sharing a landline call.
R If your cellular phone is in silent mode with
“On (with Talking CID)” set, the unit
announces caller information even when
Talking Caller ID is turned off (page 37).
3
4
MbN: Select the desired handset or “All”.
MSAVEN a MOFFN
Note:
R When you select a specific handset to
receive calls for a cellular line:
– other handsets cannot answer the calls.
– the base unit can answer the calls even
though it does not ring. However, you
(KX-TG7741 series: page 3)
R When you change the setting to “All”, the
base unit ringer volume also returns to the
lowest level even if the ringer volume has
been changed.
To use the handset ringer tone
instead of your cellular phone’s
ringer tone
page 19.
Ring as cell mode
cellular line, see page 35.
Once this feature is turned on, the handset
and base unit ring using the same ringer tone
as your cellular phone.
The following settings are available:
– “Off”: Turn this feature off to use the
ringer tones of the handset and base unit.
Caller information is announced depending
on the Talking Caller ID setting (page 37).
– “On (with Talking CID)”
(default): The handset and base unit use
your cellular phone’s ringer tone. Caller
information is announced even if the
Talking Caller ID is turned off.
– “On (without Talking CID)”: The
handset and base unit use your cellular
phone’s ringer tone. Caller information is
not announced even if the Talking Caller ID
is turned on.
Auto connection to the cellular
phone
After registration, your cellular phone is
connected to the base unit. If you move the
cellular phone out of base unit range, the
cellular phone is disconnected from the base
unit. This feature allows the base unit to try to
reconnect the cellular phone at regular
intervals when it returns within base unit
range. You can set the interval. The default
setting is “1 min”.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Link to Cell
Important:
2
To turn on:
MbN: “On” a MSELECTN a
MbN: “Yes” a MSELECTN
To turn off:
R When you are using a cellular line or a
Bluetooth headset, the base unit loses its
connection from other Bluetooth devices
(cellular phone or headset). To
MbN: “Off” a MSELECTN
automatically resume the connection to
cellular phones, leave the auto connection
on.
R Some cellular phones lose connection after
usage, please check the specification of
your cellular phone for more details.
Note:
R Once you set this mode, you can use the
following buttons to make cellular calls:
instead of MCELLN (page 22).
N
– for the base unit, press MSP-PHONEN
instead of the line button (MCELL 1N or
selection (page 20, 27).
1
2
3
MMENUN#632
MbN: Select the desired setting.
MSAVEN a MOFFN
(KX-TG7741 series: page 3)
Note:
R Once you set this mode, the following
features cannot be used:
R Some cellular phone may ask you if you
accept the connection requirement from the
2. Check the specification of your cellular
phone.
– Answering system (page 49)
Messages cannot be received.
– Voice mail features (page 55)
R After this mode is turned on or off, the base
unit reboots.
Connecting/disconnecting the
cellular phone manually
– Bluetooth connections from cellular
phones or headset are disconnected. If
(page 19), the cellular phones are
reconnected.
When you make or answer calls with your
cellular phone, we recommend disconnecting
it from the base unit, otherwise received audio
may not be heard on your cellular phone.
You can also manually reconnect the cellular
phone to the base unit without waiting for the
auto connection feature to resume the
connection.
–
will be displayed on the handset
momentarily. The handset can be used
once
is displayed.
When you use the landline again
1
2
MMENUN
page 20.
To connect/disconnect:
For CELL 1: #6251
For CELL 2: #6252
R A long beep sounds.
3
MOFFN
Cellular line selection
This feature determines which cellular line is
selected to make cellular calls when:
– you press MCELLN on the handset.
Cellular line only mode (If you do
not use the landline)
– you press M
N or M N on the handset
If you do not use the landline, we recommend
setting the unit to the cellular line only mode.
while the cellular line only mode is turned
on.
– you press MSP-PHONEN on the base unit
on. (KX-TG7741 series: page 3)
1
MMENUN#157
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Link to Cell
The following settings are available:
– “Manual” (handset only: default): You can
select the desired cellular line when making
a call.
4
MOFFN
Changing the PIN for the second time
– “Cellular phone 1” (base unit default): CELL
1 is selected.
– “Cellular phone 2”: CELL 2 is selected.
Follow step 1, “Changing the Bluetooth PIN
(Personal Identification Number)”, page 21.
from step 2.
1
2
MMENUN
For base unit : #*634
*1
Deregistering Bluetooth devices
A handset can cancel the registration of
another Bluetooth device (cellular phone or
headset) that is stored to the base unit.
3
4
MbN: Select the desired setting.
MSAVEN a MOFFN
*1 KX-TG7741 series: page 3
1
2
MMENUN#134
MbN: Select the desired device. a
MSELECTN
Storing your area code (for
dialing only a 7-digit phone
number to make a local call)
R
indicates a cellular phone, and
indicates a headset.
You need to add your area code when making
cellular calls to a phone number in your area.
Once you store your area code, it is
automatically added to the beginning of the
7-digit phone number when making cellular
calls.
3
4
MbN: “Yes” a MSELECTN
R When the cellular phone is
deregistered, the CELL 1 or CELL 2
indicator is turned off.
R When the headset is deregistered, the
HEADSET indicator is turned off.
1
2
MMENUN#633
MOFFN
Enter the 3-digit area code.
R To correct a digit, press MCLEARN.
3
MSAVEN a MOFFN
Changing the Bluetooth PIN
(Personal Identification Number)
The PIN is used to register cellular phones to
the base unit. The default PIN is “0000”. To
prevent unauthorized access to this product,
we recommend that you change the PIN, and
keep it confidential.
Important:
R Please make note of your new PIN. The
forget your PIN, see page 68.
1
2
3
MMENUN#619
Enter the new 4-digit PIN. a MOKN
Enter the new 4-digit PIN again. a
MSAVEN
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Making/Answering Calls Using the Handset
calls (page 20).
MbN: Select the desired cellular phone. a
MSELECTN
Making cellular calls
Important:
4
R Only 1 cellular line can be used at a time.
1 or CELL 2 indicator lights green (page 16).
Erasing a number in the redial list
1
2
M
N REDIAL
1
Lift the handset and dial the phone
number.
MbN: Select the desired phone number.
a MERASEN
R To correct a digit, press MCLEARN.
3
4
MbN: “Yes” a MSELECTN
2
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is registered.
MOFFN
Go to step 4.
Making landline calls
3
4
MbN: Select the desired cellular phone. a
MSELECTN
1
Lift the handset and dial the phone
number.
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
R To correct a digit, press MCLEARN.
2
3
M
N
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Note:
R To switch to the speaker, press M N.
To switch back to the receiver, press M N/
M
N.
Using the speakerphone
Adjusting the receiver or speaker
volume
1
Dial the phone number and press M N.
R Speak alternately with the other party.
2
When you finish talking, press MOFFN.
Press MjN or MkN repeatedly while talking.
Note:
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press M N/
R There are 5 volume levels (1 to 5) for the
receiver. When you change the receiver
volume to level 5 (maximum level), the
volume returns to level 4 (default) after you
hang up.
M
N.
Making a call using the redial list
Making a cellular call using the redial
list
1
2
3
MEN REDIAL
MbN: Select the desired phone number.
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
M
N
1
2
3
MEN REDIAL
Pause (for PBX/long distance service
users)
MbN: Select the desired phone number.
MCELLN
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
R The unit starts dialing when:
– only 1 cellular phone is registered.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Making/Answering Calls Using the Handset
needed (page 32).
2
3
MbN: Select the desired volume.
MSAVEN a MOFFN
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
Temporary handset ringer off
While the handset is ringing for a call, you can
turn the ringer off temporarily by pressing M N.
1
2
9 a MPAUSEN
Dial the phone number. a M
N
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.
Useful features during a
call
Hold
Answering calls
When a call is being received, the ringer
indicator flashes rapidly.
This feature allows you to put an outside call
on hold.
1
2
3
Press MMENUN during an outside call.
1
Lift the handset and press M
when the unit rings.
R To answer a cellular call, you can also
press MCELLN.
R You can also answer the call by
pressing any dial key from 0 to 9,
*, or #. (Any key answer feature)
N or M
N
MbN: “Hold” a MSELECTN
To release hold on the cellular line:
Press MCELLN.
*1
MCELLN a MSELECTN
*1 The call is taken when:
– only 1 cellular phone is
registered.
2
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
calls (page 20).
R The base unit user can take the call by
(KX-TG7741 series: page 3)
To release hold on the landline:
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You do
N. To turn this feature
Press M
R Another handset user can take the call
by pressing M N.
N.
on, see page 38.
Adjusting the handset ringer volume
R The base unit user can take the call by
(KX-TG7741 series: page 3)
n While the handset is ringing for an
incoming call:
Press MjN or MkN repeatedly to select the
desired volume.
Note:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound and
the ringer indicator flashes rapidly. After 1
additional minute on hold, the call is
disconnected.
R If another phone is connected to the same
line, you can also take the call by lifting its
handset.
n Programming the volume beforehand:
1
To change the cellular line ringer
volume:
For CELL 1: MMENUN#6281
For CELL 2: MMENUN#6282
To change the landline ringer
volume:
MMENUN#160
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Making/Answering Calls Using the Handset
Mute
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
You can temporarily switch the dialing mode
to tone when you need to access touch-tone
services (for example, answering services,
telephone banking services, etc.).
While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
1
Press MMUTEN during conversation.
R MMUTEN flashes.
2
To return to the conversation, press
MMUTEN again.
Press * (TONE) before entering access
numbers which require tone dialing.
Note:
R MMUTEN is a soft key visible on the handset
display during a call.
Handset clarity booster
This feature can improve sound clarity when
the handset is used in an area where there
may be interference. During an outside call,
this feature is turned on automatically when
necessary.
Flash for landline calls
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
R When this feature is turned on,
is
displayed. However, during a cellular call,
is not displayed even though the
feature is activated.
Note:
R To change the flash time, see page 38.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed after you hear
the call waiting tone on the handset.
1
2
3
4
Press MMENUN while talking.
MbN: “Equalizer” a MSELECTN
MbN: Select the desired setting.
Press MOKN to exit.
Note:
R When this feature is activated,
is
1
Press MCALL WAITN to answer the 2nd
call.
displayed while talking.
R Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
2
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Call share
You can join an existing outside call.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Making/Answering Calls Using the Handset
n While another unit is on a cellular call:
1
During a conversation using a cellular
phone, press MCELLN.
R The call is transferred to the handset
when:
– only 1 cellular phone is registered.
(page 20).
1
To join the conversation, press
MCELLN.
R You can join the conversation when:
– only 1 cellular phone is
registered.
calls (page 20).
2
MbN: Select the desired cellular phone. a
MSELECTN
R The call is transferred to the handset.
2
MbN: Select the desired cellular phone.
a MSELECTN
n While another unit is on a landline call:
To join the conversation, press M N.
Note:
Using the other line during a
conversation
You can handle a cellular call and a landline
call at the same time. When another call is
interrupt tone sounds (page 37), and the 2nd
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
sharing mode off (page 38).
subscribe to Caller ID (page 43). You can
answer the 2nd call while holding the 1st call.
Transferring a cellular call
between the handset and a
cellular phone
Making/answering a cellular call
during a conversation on the landline
1
2
3
Press MMENUN during a landline call.
MbN: “Hold” a MSELECTN
To make a 2nd call:
Dial the phone number. a MCELLN
MbN: Select the desired cellular phone. a
MSELECTN
Transferring a cellular call from the
handset to a cellular phone
1
2
Press MMENUN during a cellular call.
*1
a
MbN: “Transfer to cell” a
MSELECTN
R The cellular call is transferred to the
cellular phone.
*1 The unit starts dialing when:
– only 1 cellular phone is registered.
cellular calls (page 20).
Note:
R Depending on your cellular phone type, you
may need to set the cellular phone to be
ready to talk before transferring. For
example, if your cellular phone has a top
cover, open it beforehand.
To answer a 2nd call:
MCELLN
R To hold the 2nd call: MMENUN a MbN:
“Hold” a MSELECTN
4
To hang up the 2nd call and return to the
1st call (landline call), press MOFFN, then
Transferring a cellular call from a
cellular phone to the handset
press M
N.
During a conversation using a cellular phone,
the call cannot be transferred to the handset
by the cellular phone. Perform the following
with the handset.
Making/answering a landline call
duringa conversationon a cellularline
1
2
Press MMENUN during a cellular call.
MbN: “Hold” a MSELECTN
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Making/Answering Calls Using the Handset
3
To make a 2nd call:
Dial the phone number. a M
To answer a 2nd call:
N
M
N
R To hold the 2nd call: MMENUN a MbN:
“Hold” a MSELECTN
4
To hang up the 2nd call and return to the
1st call (cellular call), press MOFFN, then
press MCELLN.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Making/Answering Calls Using the Base Unit
4
When you finish talking, press
MSP-PHONEN.
Making cellular calls
Note:
Available for:
KX-TG7741 series (page 3)
R While on a call, you can switch from the
base unit to the handset:
Press M
N on the handset, then press
1
2
3
Press MCELL 1N or MCELL 2N.
sharing mode on (page 29).
If the handset is on the base unit, simply lift
it.
Dial the phone number.
When the other party answers, speak into
the microphone.
R Speak alternately with the other party.
Redialing the last number dialed
4
When you finish talking, press
MSP-PHONEN.
MSP-PHONEN a MREDIALN
Note:
Pause (for PBX/long distance service
users)
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from the
base unit to the handset:
With the call sharing mode on (page 29),
press MCELLN on the handset. a MbN:
Select the desired cellular phone. a
MSELECTN a Press MSP-PHONEN on the
base unit.
– When only 1 cellular phone is registered
(page 20), press MCELLN on the
handset, then press MSP-PHONEN on
the base unit.
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
needed (page 32).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1
2
3
MSP-PHONEN
9 a MPAUSEN
Dial the phone number.
If the handset is on the base unit, simply lift
it.
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.
Adjusting the speaker volume
Press MjN or MkN repeatedly while talking.
Redialing the last number dialed
Answering calls
When a call is being received, the SP-PHONE
indicator flashes rapidly.
1
2
Press MCELL 1N or MCELL 2N.
MREDIALN
When a cellular call is being received, the
CELL 1 or CELL 2 indicator and SP-PHONE
indicator flash rapidly.
1
Press MSP-PHONEN when the unit rings.
R You can also answer the cellular call
by pressing MCELL 1N or MCELL 2N.
Making landline calls
1
2
3
MSP-PHONEN
2
3
Speak into the microphone.
Dial the phone number.
When you finish talking, press
MSP-PHONEN.
When the other party answers, speak into
the microphone.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Making/Answering Calls Using the Base Unit
R If a call is kept on hold for more than 9
Adjusting the base unit ringer volume
minutes, an alarm tone starts to sound.
After 1 additional minute on hold, the call is
disconnected.
n While the base unit is ringing for an
incoming call:
Press MjN or MkN repeatedly to select the
desired volume.
R To turn the ringer off, press and hold
MkN until the unit beeps.
R If another phone is connected to the same
line, you can also take the call by lifting its
handset.
n Programming the volume beforehand:
Mute
1
To change the cellular line ringer
volume:
While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
For CELL 1: MMENUN#*6281
For CELL 2: MMENUN#*6282
To change the landline ringer
volume:
1
Press MMUTEN during conversation.
R The SP-PHONE indicator on the base
unit flashes.
MMENUN#*160
2
To return to the conversation, press
MMUTEN again.
2
3
MbN: Select the desired volume.
MSAVEN a MOFFN
Flash for landline calls
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Useful features during a
call
Note:
Hold
R To change the flash time, see page 38.
This feature allows you to put an outside call
on hold.
1
2
Press MHOLDN during an outside call.
For call waiting service users
To release hold on the cellular line:
Press MCELL 1N or MCELL 2N.
To use call waiting, you must first subscribe
with your service provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
*1
MCELLN a MSELECTN
*1 The call is taken when:
– only 1 cellular phone is
registered.
calls (page 20).
To release hold on the landline:
Press MSP-PHONEN.
1
Press MCALL WAITN to answer the 2nd
call.
2
To switch between calls, press MCALL
WAITN.
Note:
R A handset user can take the landline
call by pressing M
N.
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Note:
R While a cellular line is on hold, the CELL 1
or CELL 2 indicator flashes red. While a
landline call is on hold, the SP-PHONE
indicator flashes.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Making/Answering Calls Using the Base Unit
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
You can temporarily switch the dialing mode
to tone when you need to access touch-tone
services (for example, answering services,
telephone banking services, etc.).
Using the other line during a
conversation
You can handle a cellular call and a landline
call at the same time. When another call is
interrupt tone sounds (page 37). You can
answer the 2nd call while holding the 1st call.
Press * (TONE) before entering access
numbers which require tone dialing.
Making/answering a cellular call
during a conversation on the landline
Call share
1
2
Press MHOLDN during a landline call.
You can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line press MCELL 1N or MCELL
2N.
To make a 2nd call:
Press MCELL 1N or MCELL 2N. a Dial the
phone number.
To answer a 2nd call:
Press MCELL 1N or MCELL 2N.
R To hold the 2nd call, press MHOLDN.
– for the landline press MSP-PHONEN.
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
3
To hang up the 2nd call and return to the
1st call (landline call), press
MSP-PHONEN 2 times.
R To prevent other users from joining your
sharing mode off (page 38).
Making/answering a landline call
duringa conversationon a cellularline
1
2
Press MHOLDN during a cellular call.
Transferring a cellular call
between the base unit and a
cellular phone
To make a 2nd call:
MSP-PHONEN a Dial the phone number.
To answer a 2nd call:
MSP-PHONEN
R To hold the 2nd call, press MHOLDN.
Transferring a cellular call from the
base unit to a cellular phone
3
To hang up the 2nd call and return to the
1st call (cellular call), press
MSP-PHONEN, then press MCELL 1N or
MCELL 2N.
During a cellular call, press and hold MCELL
1N or MCELL 2N until the SP-PHONE indicator
goes out.
R The cellular call is transferred to the cellular
phone.
Transferring a cellular call from a
cellular phone to the base unit
During a conversation using a cellular phone,
press MCELL 1N or MCELL 2N.
R The cellular call is transferred to the base
unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Shared Phonebook
Key
Character
4
G
g
H
h
I
4
4
5
5
6
6
S
s
Shared phonebook
i
The shared phonebook allows you to make
calls without having to dial manually. Any
handset registered to the base unit can use
the shared phonebook. You can add 3,050
names and phone numbers to the shared
phonebook, and assign each phonebook entry
to the desired group (“Home”, “Cell 1”,
“Cell 2”).
5
6
7
8
9
J
K
k
L
l
j
M
m
P
p
N
n
O
o
R
r
Q
q
7
7
Important:
R Only 1 person can access the shared
phonebook at a time.
tone features (page 44).
R You can copy phonebook entries from a
shared phonebook (page 46).
T
t
U
u
V
v
Y
y
8
8
Z
z
W
w
X
x
9
9
0
#
0
#
Adding entries
R To enter another character that is located
on the same dial key, first press MEN to
move the cursor to the next space.
R If you do not press any dial key within 5
seconds after entering a character, the
character is fixed and the cursor moves to
the next space.
1
2
M
N a MADDN
Enter the party’s name (16 characters
max.). a MOKN
3
4
Enter the party’s phone number (24 digits
max.). a MOKN
R
in the above table represents a single
space.
MbN: Select the desired group. a
MSELECTN 2 times
2.
Erasing the character or number
Press MFN or MEN. a MCLEARN
R Press and hold MCLEARN to erase all
characters or numbers.
5
MOFFN
Character table for entering names
While entering characters, you can switch
between uppercase and lowercase by
pressing * (A®a).
Groups
Groups can help you find entries in the
phonebook quickly and easily. When adding
an entry to the phonebook, you can assign it
to one of 3 groups. You can search for
phonebook entries by group. The group ringer
subscribers (page 44).
Key
Character
1
&
.
’
(
)
H
,
–
/
1
C
c
F
f
2
3
A
a
D
d
B
b
E
e
2
2
3
3
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Shared Phonebook
2
To search for the name, enter the first
(page 30).
Finding and calling from a
phonebook entry
R Characters cannot be entered in
lowercase.
Scrolling through all entries
R If there is no entry corresponding to
the characters you selected, the next
entry is displayed.
n Using a cellular line
1
2
3
M
N
MbN: Select the desired entry.
3
4
MOKN
MCELLN
MbN: Scroll through the phonebook if
necessary.
R The unit starts dialing when:
– only 1 cellular phone is registered.
calls (page 20).
5
page 31.
4
MbN: Select the desired cellular phone. a
MSELECTN
Searching by group
n Using the landline
1
2
M
N a MGROUPN
1
2
3
M
N
MbN: Select the group you want to search.
a MSELECTN
R If you select “All”, the unit ends the
MbN: Select the desired entry.
M
N
group search.
Searching by first character
3
4
MbN: Select the desired entry.
1
2
M
N
page 31.
Press the dial key (0 – 9 or #) which
for (page 30).
R Press the same dial key repeatedly to
display the first entry corresponding to
each character located on that dial key.
R If there is no entry corresponding to
the character you selected, the next
entry is displayed.
Editing entries
1
Find the desired entry (page 31). a
MMENUN
2
3
MbN: “Edit” a MSELECTN
max.; page 30). a MOKN
3
4
MbN: Scroll through the phonebook if
necessary.
4
5
6
Edit the phone number if necessary (24
digits max.). a MOKN
page 31.
MbN: Select the desired group (page 30).
a MSELECTN 2 times
Searching by query
MOFFN
You can narrow down the search to enter the
first characters of a name.
Erasing entries
Erasing an entry
1
M
N a *
1
Find the desired entry (page 31). a
MERASEN
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Shared Phonebook
2
3
MbN: “Yes” a MSELECTN
MOFFN
Erasing all entries in a group
1
2
3
M
N a MMENUN
MbN: “Erase all” a MSELECTN
MbN: Select the desired group. a
MSELECTN
4
5
6
MbN: “Yes” a MSELECTN
MbN: “Yes” a MSELECTN
MOFFN
Chain dial
This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
1
During an outside call: MMENUN a
MbN: “Phonebook” a MSELECTN
2
3
MbN: Select the desired entry.
Press MCALLN to dial the number.
Note:
R When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press MPAUSEN to add
necessary (page 22).
R If you have rotary/pulse service, you need
MMENUN on the handset in step 1 to
change the dialing mode temporarily to
tone. When adding entries to the
phonebook, we recommend adding *
you wish to chain dial (page 30).
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Programming
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
n Scrolling through the display menus
1
2
3
4
MMENUN
Press MCN or MDN to select the desired main menu. a MSELECTN
Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN
Press MCN or MDN to select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN.
n Using the direct command code
1
MMENUN a Enter the desired code.
Example: Press MMENUN#101.
2
Select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN.
Note:
R In the following table, < > indicates the default settings.
R In the following table, indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu:
Operation
“Caller list”
Code
#213
Viewing the caller list.
44
51
Main menu:
Sub-menu 1
“Answering device”
Sub-menu 2
Settings
Code
#323
Play new msg.
–
–
(msg.: message)
Play all msg.
Erase all msg.
Greeting
–
–
–
–
–
–
–
#324
#325
#302
#303
#304
51
51
50
50
50
*1
*1
Record greeting
Check greeting
*1
Pre-recorded
(Reset to pre-recorded
greeting)
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
#211
*1
Settings
2–7: 2-7 rings
<4 rings>
53
53
Ring count
0: Toll saver
*1
1: 1 min
#305
Recording time
3: <3 min>
0: Greeting only
*2
*1
<111>
#306
#310
#327
#328
51
49
49
49
Remote code
Screen call
1: <On> 0: Off
*1
–
–
–
–
Answer on
*1
Answer off
*3
Main menu:
Operation
“V.M. access” (V.M.: Voice mail)
Code
#330
Listening to voice mail messages.
56
57
Main menu:
Operation
“Intercom”
Code
#274
Paging the desired unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Programming
Main menu:
Sub-menu 1
“Bluetooth”
Sub-menu 2
Settings
Code
*1
*5
Link to cell
–
20
23
28
–
Connect
/
#6251
#6252
#6281
#6282
*1
Disconnect
*6
*5
*6
*4
device
Ringer volume
– Handset
0–6: Off–6 <6>
0–6: Off–6 <1>
(for CELL 1)
*4
device
*5
*6
Ringer volume
– Base unit
#G6281
(for CELL 2)
*1
#G6282
*7, *8
*5
Ringer tone
#6291
*5
<Tone 2>
*6
#6292
*6
<Tone 4>
6–0: Melody 1-5
*5
ring
1–6: Handset 1-6
G: <All>
19
19
#6271
*1
*6
#6272
*5
Ring as cell
1: <On (with
Talking CID)>
2: On (without
Talking CID)
0: Off
#6141
*1
(limited)
*6
#6142
*5
Registration
–
18
46
#6241
*6
#6242
Phonebook
transfer
–
–
#618
*4
Headset
–
–
#621
#622
47
47
Add new device
*1
Connect
/
*1
Disconnect
Registration
–
#621
47
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
#632
*1
Settings
1: <1 min>
2: 3 min
3: 5 min
4: 10 min
0: Off
19
Auto connect
*1
–
#633
#157
21
20
Cell area code
1: On 0: <Off>
*1
mode
*4
*4
Cell line select
– Handset
#634
20
1: Cellphone 1
2: Cellphone 2
0: <Manual>
*4
*4
– Base unit
#G634
1: Cellphone 1
2: Cellphone 2
*1, *9
*1
<0000>
#619
#134
21
21
Set PIN
*2
–
–
Deregistration
Main menu:
“Set date & time”
Sub-menu 1
Date and time
Alarm
Sub-menu 2
Settings
Code
#101
#720
*1
–
–
17
–
1: Once
40
2: Daily
0: <Off>
Time
adjustment
–
1: <Caller ID
auto>
#226
–
*1, *10
0: Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Programming
Main menu:
Sub-menu 1
“Initial setting”
Sub-menu 2
Settings
Code
Ringer setting
– Handset
0–7: Off–7 <6>
#160
23
28
–
*3
Ringer volume
0–6: Off–6 <1>
#G160
#161
*1, *3
– Base unit
*3, *7, *8, *11
1–5: Tone 1-5
<Tone 1>
Ringer tone
(Handset)
6–0: Melody 1-5
– Handset
1: <On> 0: Off
1: <On> 0: Off
1: On 0: <Off>
#201
25
29
40
40
*12
Interrupt tone
#G201
#238
*1, *9, *12
– Base unit
Silent mode
– On/Off
Silent mode
<11:00 PM/06:00
#237
– Start/End
AM>
*1
Set date & time
–
#101
#720
17
40
Date and time
Alarm
1: Once
2: Daily
0: <Off>
*1, *10
1: <Caller ID
auto>
#226
–
Time adjustment
0: Manual
Talking Caller ID Handset
Base unit
1: <On> 0: Off
#162
#G162
#104
#217
#240
43
*1
1: On 0: <Off>
Handset name
–
–
–
–
40
41
41
*1
Call block
*1, *2
1: On 0: <Off>
Block w/o num
(Block calls without
phone number)
*3
*1
–
#331
55
Voice mail
Store VM access#
(VM: Voice mail)
*1
1: <On> 0: Off
1: <On> 0: Off
1–6: Level 1–6 <3>
#332
#340
#145
55
53
–
VM tone detect
Message alert
–
–
LCD contrast
(Display contrast)
*13
–
1: <On> 0: Off
#165
–
Key tone
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
#214
Caller ID edit
(Caller ID number auto
edit)
–
1: <On> 0: Off
44
*14
–
1: On 0: <Off>
#200
#120
23
17
Auto talk
*3
*1
1: Pulse
Set tel line
Set dial mode
2: <Tone>
*1, *15
0: 900 ms
1: <700 ms>
2: 600 ms
3: 400 ms
4: 300 ms
5: 250 ms
G: 200 ms
#: 160 ms
6: 110 ms
7: 100 ms
8: 90 ms
#121
24
Set flash time
9: 80 ms
*1, *16
1: A 2: <B>
#122
#194
–
Set line mode
*1
–
1: <On> 0: Off
24,
29
Call sharing
Registration
Register handset
–
–
#130
#131
#110
42
42
17
*2
Deregistration
Change language
Display
1: <English>
2: Español
*1
1: <English>
#112
17
Voice prompt
2: Español
Main menu:
Operation
“Customer support”
Code
#680
Displaying customer support Web address.
–
*1 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 When the cellular line only mode is turned on, these menus are not displayed (page 20).
*4 After the Bluetooth device is registered, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Programming
*8 The preset melodies in this product are used with permission of © 2009 Copyrights Vision
Inc.
*9 KX-TG7741 series: page 3
*10 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select
“Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 17).
*11 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
5). If you select a melody, you cannot distinguish lines by their ringers.
*12 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select “On”, the tone sounds 2 times.
*13 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any
keys, including confirmation tones and error tones.
*14 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*15 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails to
pick up the waiting call.
*16 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to “A” if telephone line condition is not good.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Programming
for example, while sleeping. Silent mode can
be set for each handset.
Special programming
Important:
(page 17).
Alarm
off (page 35, 37) in addition to turning the
silent mode on.
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Important:
(page 17).
Turning silent mode on/off
1
2
MMENUN#720
1
2
MMENUN#238
MbN: Select the desired alarm option. a
MSELECTN
MbN: Select the desired setting. a
MSAVEN
R If you select “Off”, press MOFFN to
exit.
Off
Once
Turns alarm off. Go to step 7.
An alarm sounds once at the
set time.
3
Enter the desired hour and minute you
wish to start this feature.
Daily
set time. Go to step 4.
4
5
MAM/PMN: Select “AM” or “PM”. a MOKN
Enter the desired hour and minute you
wish to end this feature.
3
Enter the desired month and date. a
MOKN
6
7
MAM/PMN: Select “AM” or “PM”.
4
5
6
Set the desired time.
MSAVEN a MOFFN
R When the silent mode is set,
displayed.
MAM/PMN: Select “AM” or “PM”. a MOKN
is
MbN: Select the desired alarm tone. a
MSELECTN
Changing the start and end time
R We recommend selecting a different
ringer tone from the one used for
outside calls.
1
2
MMENUN#237
mode on/off”, page 40.
7
MSELECTN a MOFFN
R When the alarm is set,
is displayed.
Note:
Changing the handset name
R To stop the alarm, press MOFFN or place
the handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Each handset can be given a customized
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is “No”. If you select
“Yes” without entering any handset name,
“Handset 1” to “Handset 6” is displayed.
Silent mode
Silent mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
1
MMENUN#104
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Programming
2
Enter the desired name (max. 10
page 30).
2
MbN: Select the entry to be blocked.
R To edit the number, press
MSELECTN, then press MEDITN
repeatedly until the phone number
is shown in the 10-digit format.
R If not required, go to step 3.
3
4
MSAVEN
3
4
5
6
MSAVEN
MbN: Select the desired setting. a
MSELECTN 2 times
MbN: “Call block” a MSELECTN
MbN: “Yes” a MSELECTN
5
MOFFN
Edit the phone number if necessary
(24 digits max.).
Call block (Caller ID subscribers
only)
This feature allows the unit to reject calls when:
– the unit receives a call from a phone
number stored in the call block list as
page 41).
7
MSAVEN a MOFFN
n By entering phone numbers:
1
2
MMENUN#217 a MADDN
Enter the phone number (24 digits
max.).
R To erase a digit, press MCLEARN.
phone number”, page 41).
3
MSAVEN a MOFFN
When a call is received, the unit rings for a
short time while the caller is being identified. If
the phone number matches an entry in the call
block list:
– cellular calls are rejected.
– landline calls are disconnected after the
unit first sends out a busy tone to the caller.
Blocking incoming calls without
phone number
You can reject a call when no phone number
is provided, such as a call just showing “Out
of area”.
1
2
MMENUN#240
Important:
MbN: Select the desired setting. a
MSAVEN a MOFFN
R When the unit receives a call from a
number that is stored in the call block list or
a call without a recognized phone number,
Viewing/editing/erasing call block
numbers
(page 44) with
disconnected.
after the call is
1
2
MMENUN#217
MbN: Select the desired entry.
R To exit, press MOFFN.
Storing unwanted callers
3
To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
You can store up to 30 phone numbers in the
call block list.
Important:
R We recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
a MOFFN
Note:
R When editing, press the desired dial key to
add, MCLEARN to erase.
R When viewing, “Block w/o num” is
displayed if the blocking incoming calls
without phone number feature is turned on.
n From the caller list:
1
MFN CID
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Programming
To turn the feature off: MERASEN a MCN
a MSAVEN a MOFFN
the same base unit. This allows the handset to
end its wireless connection with the system.
1
MMENUN#131
R All handsets registered to the base unit
are displayed.
Registering a unit
2
MbN: Select the handset you want to
cancel. a MSELECTN
Operating additional units
Additional handsets
3
4
MbN: “Yes” a MSELECTN
MOFFN
Up to 6 handsets can be registered to the
base unit.
Important:
R See page 5 for information on the available
model.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit, re-register
the handset.
1
Handset:
MMENUN#130
2
Base unit:
Press and hold MLOCATORN for about 5
seconds until the registration tone sounds.
R If all registered handsets start ringing,
press MLOCATORN again to stop, then
repeat this step.
R The next step must be completed
within 90 seconds.
3
Handset:
Press MOKN, then wait until a long beep
sounds.
Note:
R While registering, “Base in
registering” is displayed on all
registered handsets.
R When you purchase an additional handset,
refer to the additional handset’s installation
manual for registration.
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Caller ID Service
phonebook is displayed and logged in the
caller list.
Using Caller ID service
Important:
Talking Caller ID
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/
Handset / Base unit
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
telephone company for details.
– subscribe to a Caller ID service of your
– turn this feature on (page 37).
Caller ID features
When an outside call is being received, the
caller’s name and phone number are
displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– “Out of area”: The caller dials from
an area which does not provide a Caller
ID service.
– “Private caller”: The caller
requests not to send caller information.
– “Long distance”: The caller makes a
long distance call.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
When caller information is received, the
handsets and base unit announce the caller’s
name or phone number received from your
service provider/telephone company following
every ring.
The unit announces in English only.
R Name pronunciation may vary. This feature
may not pronounce all names correctly.
R Caller ID service has a limit of how many
characters can be displayed. If the caller’s
name is too long:
– the handset may not be able to display
or announce the entire name.
– the base unit may not be able to
announce the entire name.
level as the ringer volume (page 23, 28).
53), the unit does not announce the caller
information from the landline. If “Toll
saver” is selected and there is a new
message, the unit does not announce the
caller information from the landline.
R When you receive a call while on the
phone, the 2nd caller’s name is not
announced even if you subscribe to both
Caller ID and Call Waiting with Caller ID
services.
Missed calls
If a call is not answered, the unit treats it as a
missed call. The display shows “Missed
call”.
Note:
R Even when there are unviewed missed
calls, “Missed call” disappears from the
standby display if the following operation is
performed by one of the units:
– A handset is replaced on the base unit
or charger.
– Pressing MOFFN on a handset.
Phonebook name announcement
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Caller ID Service
1
2
MFN CID
Ringer ID
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
You can select the desired ringer tone to a
(page 30). When a call is received from a
caller assigned to a group, the ringer tone you
called line’s ringer tone (page 19, 35, 37) after
caller information is displayed. If you select
“Current ringer” (default), the unit uses
the called line’s ringer tone when calls from
this group are received.
3
To call back, press M
To exit, press MOFFN.
N.
Note:
R If the entry has already been viewed or
answered, “ ” is displayed, even if it was
R In step 2, if is displayed, not all of the
information is shown. To see the remaining
information, press MEN. To return to the
previous screen, press MFN.
1
2
3
M
N a MMENUN
MbN: “Group” a MSELECTN
R
or
indicates the caller information
MbN: Select the desired group. a
MSELECTN
was received from the cellular line.
4
5
MbN: Select the desired ringer tone. a
MSAVEN
Editing a caller’s phone number
before calling back
You can edit a phone number in the caller list
by removing its area code and/or the long
distance code “1”.
MOFFN
Caller list
Important:
1
2
3
MFN CID
MbN: Select the desired entry.
R Only 1 person can access the caller list at a
time.
is correct (page 17).
Press MSELECTN, then press MEDITN
repeatedly until the phone number is
shown in the desired format.
A
Local phone number
Example: 321-5555
Viewing the caller list and calling
back
B
C
Area code – Local phone number
Example: 555-321-5555
n Using a cellular line
1 – Area code – Local phone number
1
2
MFN CID
Example: 1-555-321-5555
Press M N to search from the most recent
call, or M N to search from the oldest call.
4
Using a cellular line:
back”, page 44.
3
4
To call back, press MSELECTN.
To exit, press MOFFN.
MCELLN
Using the landline:
R The unit starts dialing when:
– only 1 cellular phone is registered.
calls (page 20).
M
N
Caller ID number auto edit feature
Once you call back an edited number, the unit
which was used to call back remembers the
area code and format of the edited number.
5
MbN: Select the desired cellular phone. a
MSELECTN
n Using the landline
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Caller ID Service
The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
– When the call is being received, the Caller
ID number is displayed in the same format
as the edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as
the edited number, when reviewed from the
caller list.
phone number is shown in the desired
format.
MSAVEN
3
4
5
MbN: “Phonebook” a MSELECTN
page 31.
For example, you can use this feature to set
the unit to ignore the area code of callers in
your area, so that you can call these local
numbers using caller information without
dialing the area code.
To activate this feature, you must edit an entry
in the caller list, then call that number. After
that, phone numbers from that caller’s area
code are edited automatically.
(page 38). The default setting is “On”.
Note:
R Phone numbers from the 4 most recently
edited area codes are automatically edited.
Erasing selected caller
information
1
2
3
4
MFN CID
MbN: Select the desired entry.
MERASEN a MbN: “Yes”
MSELECTN a MOFFN
Erasing all caller information
1
2
3
MFN CID
MERASEN a MbN: “Yes”
MSELECTN a MOFFN
Storing caller information to the
phonebook
1
2
M
N CID
MbN: Select the desired entry.
R To edit the number, press MSELECTN,
then press MEDITN repeatedly until the
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Using Bluetooth Devices
4
Cellular phone:
Follow the instructions of your cellular
phone to copy phonebook entries.
R For other cellular phones (not
registered), you need to search for and
select the base unit. The base unit PIN
(default: “0000”) may be required.
R The entries being copied are displayed
on the handset.
Copying phonebook from a
cellular phone (phonebook
transfer)
You can copy phonebook entries from the
registered cellular phones or other cellular
phones (not registered) to the unit’s shared
phonebook. A cellular phone must be
5
6
Handset:
Bluetooth wireless technology compatible.
Wait until “Completed” is displayed.
R You can continue copying other entries
if necessary.
Important:
R If a copied entry has 2 or more phone
numbers, each phone number (6 max.) is
stored as a separate entry with the same
name.
Handset: MOFFN
Note:
R If a phonebook entry includes additional
data such as a picture, that entry may fail to
copy to the base unit.
R Some copied entries may have characters
(page 30). These characters can be
displayed but cannot be entered when
editing an entry.
R The unit does not support some characters.
If a copied entry includes those characters,
they are replaced with other available
characters or “H”.
1
2
Handset:
MMENUN#618
Handset:
To copy from registered cellular
phones:
MbN: Select the desired cellular phone. a
MSELECTN
R If you receive a call while copying
phonebook entries, the copying procedure
stops. Try again after finishing the call.
R Copied items are stored to the group
(“Cell 1” or “Cell 2”) which the
cellular phone is registered to.
To copy from other cellular phones
(not registered):
MbN: “Other cell” a MSELECTN a
MbN: Select the group you want to copy to.
a MSELECTN
3
When “Transfer phonebook from
Go to step 4.
When “Select mode” menu is
displayed:
MbN: Select “Auto” or “Manual”. a
MSELECTN
“Auto”: Download all entries from the
cellular phone automatically. Go to step 5.
“Manual”: Copy entries you selected.
R “Select mode” menu is displayed
only when the cellular phone supports
PBAP (Phone Book Access Profile) for
Bluetooth connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Using Bluetooth Devices
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Using a Bluetooth wireless
headset (optional) for
landline calls
By registering a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R Make sure that the headset is turned on.
*1
Base unit
*1 KX-TG7741 series: page 3
To connect:
Press MHEADSETN.
To disconnect:
Press and hold MHEADSETN until a long beep
sounds.
Important:
R 1 headset can be registered to the base
unit. However, only one Bluetooth device
(cellular phone or headset) can be
connected to the base unit at a time.
R For best performance, we recommend
using a Bluetooth headset within 1 m
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).
Handset
1
2
To connect/disconnect:
MMENUN#622
R A long beep sounds.
MOFFN
Registering a headset to the base
unit
Deregistering a headset
You can cancel a registration of the headset
Important:
“Deregistering Bluetooth devices”, page 21.
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
Operating a Bluetooth wireless
headset using a landline
Important:
1
Your headset:
Set your headset to registration mode.
R Refer to the headset operating
instructions.
R Refer to your headset operating instructions
for headset operations.
2
3
Handset:
MMENUN#621
Enter your headset PIN.
R Typically, default PIN is “0000”. Refer
to the headset operating instructions.
Answering landline calls with your
headset
4
5
Press MOKN, then wait until a long beep
sounds.
To answer a landline call, turn on your
headset referring to your headset operating
instructions.
MOFFN
R When the HEADSET indicator on the
base unit lights green, you are ready to
use the headset.
When you finish talking, turn off your headset
referring to your headset operating
instructions.
Note:
Connecting/disconnecting a headset
R If you cannot hang up the call using your
headset;
(KX-TG7731 series: page 3)
If you cannot connect the headset and base
unit using the headset, you can connect using
the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Using Bluetooth Devices
times. (KX-TG7741 series: page 3)
Switching between the base unit and
your headset
You can switch between the base unit and
your headset:
speakerphone. (KX-TG7741 series: page 3)
– during an intercom call between the base
page 3)
*1
the base unit answering system.
n KX-TG7741 series: page 3
To switch to your headset:
Press MHEADSETN on the base unit.
To switch to the base unit:
*1 KX-TG7731 series: page 3
R You can only switch from the base unit
to your headset. Turn on the headset
referring to your headset operating
instructions.
Call sharing between your headset
and the handset
Important:
sharing mode to on beforehand (page 38).
n While the handset is on a landline call:
To join the conversation with your headset,
turn on the headset referring to your
headset operating instructions.
n While your headset is on a landline call:
To join the conversation with the handset,
press M
N.
Adjusting your headset receiver
volume
Base unit
Press MjN or MkN repeatedly while using your
headset.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Answering System for Landline
Answering system for
landline
Turning the answering
system on/off
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
time setting (page 53).
Base unit
Press MANSWER ON/OFFN to turn on/off the
answering system.
Handset
1
To turn on:
MMENUN#327
To turn off:
Important:
R Only 1 person can access the answering
system (listen to messages, record a
greeting message, etc.) at a time.
MMENUN#328
2
MOFFN
R When callers leave messages, the unit
records the day and time of each message.
correctly (page 17).
Note for base unit and handset:
R When the answering system is turned on:
– The ANSWER ON/OFF indicator on the
base unit lights up.
(page 20), the answering system cannot be
used and any messages are not received.
– The message counter on the base unit
displays the total number of messages
(old and new).
Memory capacity (including your
greeting message)
The total recording capacity is about 18
minutes. A maximum of 64 messages can be
recorded.
Call screening
While a caller is leaving a message, you can
listen to the call through the unit’s speaker.
Handset
To adjust the speaker volume, press MjN or
MkN repeatedly. You can answer the call by
Note:
R When message memory becomes full:
– “Messages full” is shown on the
handset display.
– The ANSWER ON/OFF indicator on the
base unit flashes rapidly if the answering
system is turned on.
pressing M
N. Call screening can be set for
each handset. The default setting is “On”.
1
2
MMENUN#310
MbN: Select the desired setting. a
MSAVEN a MOFFN
– The message counter on the base unit
flashes if the answering system is turned
on.
*1
Base unit
*1 KX-TG7741 series: page 3
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
To adjust the speaker volume, press MjN or
MkN repeatedly. You can answer the call by
pressing MSP-PHONEN.
To turn off while screening a call, press MkN
repeatedly until the sounds goes off.
R If you adjust the speaker volume while
listening to messages or having a
conversation, the speaker volume for call
screening is turned on again.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Answering System for Landline
Playing back the greeting
message
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
1
2
MMENUN#303
To exit, press MOFFN.
Listening to messages
using the base unit
Recording your greeting message
1
2
3
MMENUN#302
When new messages have been recorded,
MbN: “Yes” a MSELECTN
M
N on the base unit flashes.
Press M N (PLAY).
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
4
5
Press MSTOPN to stop recording.
MOFFN
Operating the answering system
during playback
Using a pre-recorded greeting
message
Key
Operation
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers to
leave a message.
– If the message recording time (page 53)
is set to “Greeting only”, callers’
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
MjN or MkN
Adjust the speaker volume
*1
M
M
N
N
Repeat message
Skip message
Stop playback
MnN (STOP)
MERASEN
Erase currently playing
message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
Resetting to a pre-recorded greeting
message
Erasing all messages
Press MERASEN 2 times while the unit is not in
use.
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
1
2
MMENUN#304
Listening to messages
using the handset
MYESN a MOFFN
When new messages have been recorded:
– “New message” is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Answering System for Landline
– The message indicator on the handset
is turned on (page 53).
MbN: “Playback” a MSELECTN
*3 You can also erase as follows:
MERASEN a MbN: “Yes” a MSELECTN
1
To listen to new messages:
MMENUN#323
Calling back (Caller ID
subscribers only)
To listen to all messages:
MMENUN#324
2
Note:
When finished, press MOFFN.
If caller information is received for the call, you
can call the caller back while listening to a
message.
R To switch to the receiver, press M
N.
1
2
Press MPAUSEN during playback.
MbN: “Call back” a MSELECTN
Operating the answering system
MMENUN a MbN: “Answering device” a
MSELECTN
Editingthe numberbeforecallingback
1
2
3
Press MPAUSEN during playback.
Key
Operation
MbN: “Edit & Call” a MSELECTN
MjN or MkN Adjust the receiver/speaker
volume
Press MEDITN repeatedly until the phone
(during playback)
(page 44). a M
N
1 or MFN
Repeat message
(during playback)
calls”, page 22.
*1
2 or MEN
Skip message
(during playback)
3
Enter the “Settings” menu
Play new messages
Erasing all messages
4
1
2
MMENUN#325
5
Play all messages
MbN: “Yes” a MSELECTN a MOFFN
6
Play greeting message
Record greeting message
Turn answering system on
76
8
Remote operation
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
*2
MPAUSEN
Pause message
9 or
MSTOPN
Stop recording
Stop playback
answering system settings. The unit’s voice
guidance prompts you to press certain dial
keys to perform different operations.
0
Turn answering system off
*3
Erase currently playing
message
*4
*5
*6
Erase all messages
Remote access code
Reset to a pre-recorded
greeting message
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is “111”.
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Answering System for Landline
Important:
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
R To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
1
2
MMENUN#306
Key
Operation
Enter the desired 3-digit remote access
code.
1
Repeat message
(during playback)
*1
3
MSAVEN a MOFFN
2
Skip message
(during playback)
Deactivating remote operation
4
5
9
Play new messages
Play all messages
page 51.
R The entered remote access code is deleted.
*2
Stop playback
*3
Start voice guidance
Using the answering system
remotely
0
Turn answering system off
Erase currently playing message
Erase all messages
*4
*5
*#
1
2
3
Dial your landline phone number from a
touch-tone phone.
End remote operation
(or hang up)
After the greeting message starts, enter
your remote access code.
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 For English voice guidance only
*3 For Spanish voice guidance only
Follow the voice guidance prompts as
remote commands (page 52).
4
When finished, hang up.
Voice guidance
n When the English voice guidance is
selected
During remote operation, the unit’s voice
guidance starts and prompts you to press
1 to perform a specific operation, or press
2 to listen to more available operations.
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
1
2
3
Dial your phone number from a
touch-tone phone.
Let the phone ring 15 times.
R A long beep is heard.
n When the Spanish voice guidance is
selected
To start the voice guidance, press 9. The
remote commands (page 52).
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote operation (page 51).
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Answering System for Landline
by your service provider/telephone
company before changing this setting.
– Change the number of rings of the voice
mail service so that the answering
system can answer the call first. To do
so, contact your service provider/
telephone company.
Answering system settings
Number of rings before the unit
answers a call
You can change the number of times the
phone rings “Ring count” before the unit
answers calls. You can select 2 to 7 rings, or
“Toll saver”.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is “3 min”.
The default setting is “4 rings”.
“Toll saver”: The unit’s answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
to listen to new messages (page 51), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
1
2
MMENUN#305
MbN: Select the desired setting. a
MSAVEN a MOFFN
Selecting “Greeting only”
You can select “Greeting only” which sets
the unit to announce a greeting message to
callers but not record messages.
“Caller’s recording time”, page 53.
1
2
MMENUN#211
MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
For voice mail service subscribers
R When you select “Greeting only”:
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
If you subscribe to a flat-rate service package
that includes Caller ID, call waiting, voice mail,
and unlimited local/regional/long distance
calls, please note the following:
– If you use your own message, record the
call again later (page 50).
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
turn off the answering system (page 49).
R To use this unit’s answering system rather
than the voice mail service provided by
your service provider/
telephone company, please contact your
service provider/telephone company to
deactivate your voice mail service.
If your service provider/telephone company
cannot do this:
Message alert
You can select whether or not the message
indicator on the handset flashes slowly when
new messages are recorded. The default
setting is “On”.
Important:
(page 55), the message indicator also
flashes for newly recorded voice mail
messages from the landline (page 56).
– Set this unit’s “Ring count” setting so
that this unit’s answering system
answers calls before the voice mail
service of your service provider/
telephone company does. It is necessary
to check the number of rings required to
activate the voice mail service provided
1
2
MMENUN#340
MbN: Select the desired setting. a
MSAVEN a MOFFN
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Answering System for Landline
Note:
operating time is shortened (page 12).
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Voice Mail Service for Landline
Example:
1-222-333-4444
Voice mail service for
landline
Voice mail is an automatic answering service
offered by your service provider/telephone
company. After you subscribe to this service,
your service provider/telephone company’s
voice mail system answers calls for you when
you are unavailable to answer the phone or
when your line is busy. Messages are
PPPP
8888
VM access
number
Pauses Password
To erase the voice mail access
number
1
2
MMENUN#331
recorded by your service provider/
telephone company, not your telephone.
Please contact your service provider/
Press and hold MCLEARN until all digits
are erased. a MSAVEN a MOFFN
telephone company for details of this service.
Important:
Voice mail (VM) tone detection
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
For details, see page 53.
R You need to store the voice mail access
feature (page 53) for voice mail service.
*1
Handset / Base unit
*1 KX-TG7741 series: page 3
Your service provider/telephone company
sends special signals (sometimes called
“voice mail tones” or “stutter tones”) to the unit
to let you know you have new voice mail
messages. If you hear a series of dial tones
followed by a continuous dial tone after you
Storing the voice mail (VM)
access number
In order to listen to your voice mail messages,
you must dial your service provider/telephone
company’s voice mail access number. Once
you have stored your voice mail access
(page 56).
press M
N on the handset or press
MSP-PHONEN on the base unit, you have new
voice mail messages. Soon after you hang up
a call or after the phone stops ringing, your
unit checks the phone line to see if new voice
mail messages have been recorded.
Turn this feature off when:
– You do not subscribe to voice mail service.
– Your service provider/telephone company
does not send voice mail tones.
– Your phone is connected to a PBX.
If you are not sure which setting is required,
contact your service provider/telephone
company.
1
2
MMENUN#331
Enter your access number (24 digits
max.). a MSAVEN a MOFFN
Note:
R When storing your voice mail access
MPAUSEN to add pauses (page 22)
between the access number and the
password as necessary. Contact your
service provider/telephone company for the
required pause time.
Turning VM tone detection on/off
The default setting is “On”.
1
2
MMENUN#332
MbN: Select the desired setting. a
MSAVEN a MOFFN
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Voice Mail Service for Landline
Listening to voice mail messages
The unit lets you know that you have new
voice mail messages in the following ways:
– “New Voice Mail” is displayed on the
handset if message indication service is
available.
– The message indicator on the handset
is turned on (“Message alert”, page 53).
Handset
1
MMENUN#330
R The speakerphone turns on.
2
3
Follow the pre-recorded instructions.
When finished, press MOFFN.
Note:
R If the handset still indicate there are new
messages even after you have listened to
all new messages, turn it off by pressing
and holding # until the handset beeps.
*1
Base unit
*1 KX-TG7741 series: page 3
To listen to voice mail messages, you have to
dial your voice mail access number manually.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Intercom/Locator
1
2
Press MINTERCOMN to answer the page.
Intercom
When you finish talking, press
MINTERCOMN.
Intercom calls can be made:
– between handsets
*1
*1 KX-TG7741 series: page 3
Handset locator
You can locate a misplaced handset by
paging it.
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, you hear 2 tones.
– To answer the call with the handset,
press MOFFN, then press M
1
Base unit:
Press MLOCATORN.
R All registered handsets beep for 1
minute.
N.
2
To stop paging:
Base unit:
Press MLOCATORN.
Handset:
*1
*1 KX-TG7741 series: page 3
n KX-TG7731 series: page 3
Press MOFFN.
n KX-TG7741 series: page 3
Making an intercom call
Handset
Press M
N, then press MOFFN.
1
2
MMENUN a MINTN
MbN: Select the desired unit. a MSELECTN
R To stop paging, press MOFFN.
3
When you finish talking, press MOFFN.
*1
Base unit
*1 KX-TG7741 series: page 3
1
Press MINTERCOMN.
R To page a specific handset, enter the
handset number.
R To page all handsets, press 0 or wait
for a few seconds.
R To stop paging, press MINTERCOMN.
2
When you finish talking, press
MINTERCOMN.
Answering an intercom call
Handset
1
2
Press M
N to answer the page.
When you finish talking, press MOFFN.
*1
Base unit
*1 KX-TG7741 series: page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Intercom/Locator
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, press
MSP-PHONEN. The other 2 parties can
continue the conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference,
press MCONFN.
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can be
made:
– between 2 handsets
*1 KX-TG7741 series: page 3
*1
Answering a transferred call
Handset
Handset
1
During an outside call, press MINTN to put
the call on hold.
Press M
N to answer the page.
2
3
MbN: Select the desired unit. a MSELECTN
*1
Base unit
Wait for the paged party to answer.
R If the paged party does not answer,
*1 KX-TG7741 series: page 3
press M
N to return to the outside call.
Press MSP-PHONEN to answer the page.
4
To complete the transfer:
Press MOFFN.
R The outside call is being routed to the
destination unit.
To establish a conference call:
MMENUN a MbN: “Conference” a
MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMENUN a MbN: “Hold” a
MSELECTN
To resume the conference: MMENUN
a MbN: “Conference” a MSELECTN
*1
Base unit
*1 KX-TG7741 series: page 3
1
During an outside call, press
MINTERCOMN.
R To page a specific handset, enter the
handset number.
R To page all handsets, press 0 or wait
for a few seconds.
2
Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside
call.
3
To complete the transfer:
Press MSP-PHONEN.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Useful Information
3
Insert the hooks on the wall mounting
adaptor into holes
unit.
and
on the base
Wall mounting
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
2
1
Base unit
1
Thread the AC adaptor cord and
telephone line cord through the hole in
the wall mounting adaptor in the direction
of the arrow.
2
1
4
Adjust the adaptor to hold the base unit,
then push it in the direction of the arrow
until it clicks into place.
2
Tuck the telephone line cord inside the
wall mounting adaptor (A). Connect the
AC adaptor cord and telephone line cord
(B).
B
A
Hook
AC adaptor cord
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Useful Information
5
Mount the unit on a wall then slide down
to secure in place.
To remove the wall mounting adaptor
While pushing down the release levers (A),
remove the adaptor (B).
AC adaptor cord
A
A
1
83 mm
(3 1
B
/4 inches)
or
102 mm
(4 inches)
Charger
2
Drive the screws (not supplied) into the wall.
25.4 mm
(1 inch)
Wall phone plate
83 mm
(3 1/4 inches)
102 mm
(4 inches)
1
2
Screws
Hooks
Download from Www.Somanuals.com. All Manuals Search And Download.
60
Useful Information
Error messages
Display message
Cause/solution
Base no power
or
No link. Re-connect base
AC adaptor.
R The handset has lost communication with the base
unit. Move closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
Re-register the handset (page 42).
Busy
Register a cellular phone (page 18).
R The called unit is in use.
R Other units are in use and the system is busy. Try
again later.
R The handset you are using is too far from the base
unit. Move closer and try again.
Call phone company for
your access #
Store the number (page 55).
Check tel line
R The supplied telephone line cord has not been
connections (page 11).
R If you do not connect the telephone line cord and use
(page 20).
Error!!
R Recording was too short. Try again.
R Someone is using a cellular line or headset. Try
again later.
R The phonebook copy is incomplete (page 46). The
cellular phone is disconnected from the base unit.
Make sure that other Bluetooth devices are not
connected to the cellular phone, and try again.
Failed
R Although the unit tried to connect to the cellular
phone or headset, the connection has been failed.
– Someone is using a cellular line or headset. Try
again later.
– Make sure that the cellular phone or headset is
not connected to other Bluetooth devices.
Invalid
R There is no handset registered to the base unit
matching the handset number you entered.
Register the handset (page 42).
Requires subscription to
Caller ID.
R You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Useful Information
Display message
Cause/solution
Use rechargeable battery.
R A wrong type of battery such as Alkaline or
Ni-MH batteries noted on page 5, 8.
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset,
and then insert the batteries into the handset again.
General use
Problem
Cause/solution
The handset does not turn on
even after installing charged
batteries.
R Place the handset on the base unit or charger to turn on
the handset.
The unit does not work.
R Check the connections (page 11).
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
Register the handset (page 42).
I cannot register a cellular phone R Depending on the compatibility of the cellular phone,
to the base unit.
you may not be able to register it to the base unit.
Confirm that your cellular phone supports the hands-free
profile (HFP) specification.
R Confirm that the Bluetooth feature of your cellular phone
is turned on. You may need to turn this feature on
depending on your cellular phone.
R The Bluetooth technology on your cellular phone may
not be functioning normally. Turn off and on your cellular
phone.
R If your cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from your cellular phone.
R Some cellular phones may require you to enter the base
unit PIN to register. Confirm that you entered the correct
PIN.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Useful Information
Problem
Cause/solution
I cannot connect a cellular phone R Confirm that your cellular phone is turned on.
to the base unit.
range (page 15).
R Depending on the state of the wireless environment,
such as the presence of any electrical interference,
there may be a delay even if the auto connection feature
(page 20).
unit. Register the cellular phone (page 18).
I cannot hear a dial tone.
properly (page 11).
green (page 16).
(page 11).
R Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our
service personnel to have the unit repaired. If the
working telephone does not operate properly, contact
your service provider/
telephone company.
The indicator on the handset
flashes slowly.
messages (page 50).
to the new voice mail messages (page 56).
The receiver volume is changed R The receiver volume returns to level 4 after you hang
to level 4 (default), even though I
set it to level 5 (maximum level).
up. Press MjN or MkN to adjust the volume every time
or as needed.
Programmable settings
Problem
Cause/solution
R Change the display language (page 17).
The display is in a language I
cannot read.
I cannot register a handset to a R The maximum number of handsets (6) is already
base unit.
registrations from the base unit (page 42).
Battery recharge
Problem
Cause/solution
R Battery charge is low. Fully charge the batteries (page 12).
The handset beeps and/or
flashes.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Useful Information
Problem
Cause/solution
I fully charged the batteries, but
R Clean the battery ends (
,
) and the charge contacts
–
–
still flashes,
with a dry cloth and charge again.
R It is time to replace the batteries (page 11).
is displayed, or
– the operating time seems to
be shorter.
Making/answering calls, intercom
Problem
is displayed.
Cause/solution
R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
(page 42).
Noise is heard, sound cuts in
and out.
R You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
not ring.
(page 35, 37).
R When one handset is selected to ring for cellular calls,
page 19.
(page 40).
I cannot make local calls with
the handset or base unit using
a cellular line.
R You need to add your area code when making cellular
calls. Store your area code in order to automatically add it
making cellular calls (page 21).
I cannot make or answer
cellular calls with the handset
or base unit.
R Depending on the cellular phone’s compatibility, you may
not be able to make or answer cellular calls even if the
cellular phone is connected to the base unit.
R Make sure that the CELL 1 or CELL 2 indicator lights
(page 20).
R If someone is talking on a cellular call or using the
headset, you cannot use the cellular feature. There can
be only one active Bluetooth connection at a time.
R The cellular phone is being used separately from your
system.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Useful Information
Problem
Cause/solution
I can make and answer cellular R The Bluetooth technology on your cellular phone may not
calls but cannot hear a sound.
be functioning normally. Turn off and on your cellular
phone.
R Disconnect and reconnect the base unit AC adaptor and
try again.
I cannot switch cellular calls
from the unit to the cellular
phone.
R Your cellular phone may not support this feature. Refer to
the operating instructions of your cellular phone.
I cannot make a call using the
landline.
setting (page 17).
(page 20).
I cannot make long distance
calls.
R Make sure that you have long distance service.
Caller ID/Talking Caller ID
Problem
Cause/solution
Caller information is not
displayed.
R You must subscribe to Caller ID service. Contact your
service provider/telephone company for details.
R If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R The name display service for landline calls may not be
available in some areas. Contact your service provider/
telephone company for details.
R Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
Caller information is displayed
or announced late.
R Depending on your service provider/telephone company,
the unit may display or announce the caller’s information
at the 2nd ring or later.
R Move closer to the base unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
Useful Information
Problem
Cause/solution
Caller information is not
announced.
Adjust it (page 23, 28, 35, 37).
R When one handset is selected to ring for cellular calls,
the selection, see page 19.
(page 37).
CID)”. To change the mode, see page 19.
R The number of rings for the answering system is set to “2
(page 53).
R Your unit does not announce caller information if
– the base unit or 2 or more handsets are on a call.
– a headset is in use.
The caller list/incoming phone
numbers are not edited
automatically.
it on and try again (page 38).
R You need to call back the edited number to activate Caller
ID number auto edit.
I cannot dial the phone number R The phone number you dialed might have been edited
edited in the caller list.
incorrectly (for example, the long distance “1” or the area
pattern (page 44).
Time on the unit has shifted.
R Incorrect time information from incoming Caller ID
“Manual” (off) (page 36).
The 2nd caller’s information is
not displayed during an outside
call.
R In order to use Caller ID, call waiting, or Call Waiting
Caller ID (CWID), you must first contact your service
provider/telephone company and subscribe to the desired
service.
After subscribing, you may need to contact your service
provider/telephone company again to activate this specific
service, even if you already subscribed to both Caller ID
and Call Waiting with Caller ID services (CWID).
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Useful Information
Using Bluetooth devices
Problem
Cause/solution
I cannot copy phonebook
entries from a cellular phone.
R Confirm that the cellular phone supports Bluetooth
wireless technology.
R Confirm that the cellular phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.
R If the cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from the cellular phone.
R Someone is using a cellular line or headset. Try again
later.
R Turn the cellular phone off, then turn it on and try again.
R If an entry is already stored in the unit’s shared
phonebook, the entry cannot be copied even by selecting
another group.
I cannot have a conversation
using the headset.
(page 47).
R Turn your headset off, then turn it on and try again.
Noise is heard during a call on
the headset.
R A Bluetooth headset can communicate with the base unit
within a range of approximately 10 m (33 feet). The
connection may be subject to interference from
obstructions such as walls or electronic devices. Move
closer to the base unit.
I cannot connect my headset to R Confirm that your headset is turned on.
the base unit.
R If your headset is already connected to another Bluetooth
device such as your cellular phone, disconnect the
headset from your cellular phone, then perform the
connecting procedure from the base unit.
R If someone is using a cellular line, you cannot connect the
headset. There can be only one active Bluetooth
connection at a time.
Register the headset (page 47).
Some headset enhanced
features are not available.
R The base unit does not support enhanced features such
as Last number redial or Call reject.
An error tone is heard when I
try to program the Bluetooth
feature.
R The Bluetooth feature cannot be accessed immediately
after connecting the AC adaptor to the base unit. Wait a
few seconds and try again.
R The headset has not connected to the base unit yet, even
though you performed the connecting procedure setting.
Wait a few seconds and try again.
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Useful Information
Answering system
Problem
Cause/solution
The unit does not record new
messages.
R The answering system is turned off. Turn it on (page 49).
R The answering system does not answer or record calls
from cellular lines.
messages (page 50).
the setting (page 53).
R If you subscribe to a voice mail service, messages are
recorded by your service provider/telephone company,
not your telephone. Change the unit’s number of rings
company (page 53).
R The answering system will not answer incoming calls
while:
– the base unit or 2 or more handsets are on a cellular
call or an intercom call.
– a headset is in use.
Caller information is recorded in the caller list.
system remotely.
access code (page 51).
R You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
(page 51).
R The answering system is turned off. Turn it on (page 52).
R You cannot operate the answering system when calling a
cellular phone registered to the base unit.
Bluetooth PIN
Problem
Cause/solution
I cannot remember the PIN.
R Change the PIN using the following method.
1
2
3
4
MMENUN#619
*7000
Enter the new 4-digit PIN. a MOKN
Enter the new 4-digit PIN again. a MSAVEN a MOFFN
Download from Www.Somanuals.com. All Manuals Search And Download.
68
Useful Information
Liquid damage
Problem
Cause/solution
Liquid or other form of moisture R Disconnect the AC adaptor and telephone line cord from
has entered the handset/base
unit.
the base unit. Remove the batteries from the handset and
leave to dry for at least 3 days. After the handset/base
unit are completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and charge fully
before use. If the unit does not work properly, contact an
authorized service center.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
Download from Www.Somanuals.com. All Manuals Search And Download.
69
Useful Information
FCC and other information
This equipment complies with Part 68 of the
FCC rules and the requirements adopted by
the ACTA. On the bottom of this equipment
is a label that contains, among other
information, a product identifier in the
format US:ACJ----------.
advised of your right to file a complaint with
the FCC if you believe it is necessary.
The telephone company may make changes
in its facilities, equipment, operations or
procedures that could affect the operation of
the equipment. If this happens the
telephone company will provide advance
notice in order for you to make necessary
modifications to maintain uninterrupted
service.
If requested, this number must be provided
to the telephone company.
L Registration No.............(found on the
bottom of the unit)
L Ringer Equivalence No. (REN).......0.1B
If trouble is experienced with this
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
equipment, for repair or warranty
information, please contact a Factory
Service Center or other Authorized Servicer.
If the equipment is causing harm to the
telephone network, the telephone company
may request that you disconnect the
equipment until the problem is resolved.
requirements adopted by the ACTA. A
compliant telephone cord and modular plug
is provided with the product. It is designed
to be connected to a compatible modular
jack that is also compliant.
Connection to party line service is subject to
state tariffs. Contact the state public utility
commission, public service commission or
corporation commission for information.
The REN is used to determine the number
of devices that may be connected to a
telephone line. Excessive RENs on a
telephone line may result in the devices not
ringing in response to an incoming call. In
most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain
of the number of devices that may be
connected to a line, as determined by the
total RENs, contact the local telephone
company. For products approved after July
23, 2001, the REN for the product is part of
the product identifier that has the format
US:AAAEQ##TXXXX. The digits
If your home has specially wired alarm
equipment connected to the telephone line,
ensure the installation of this equipment
does not disable your alarm equipment. If
you have questions about what will disable
alarm equipment, consult your telephone
company or a qualified installer.
This equipment is hearing aid compatible as
defined by the FCC in 47 CFR Section
68.316.
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
When you hold the phone to your ear, noise
might be heard in your Hearing Aid. Some
Hearing Aids are not adequately shielded
from external RF (radio frequency) energy. If
noise occurs, use an optional headset
accessory or the speakerphone option (if
applicable) when using this phone. Consult
with your audiologist or Hearing Aid
If this equipment causes harm to the
telephone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be required.
But if advance notice isn't practical, the
telephone company will notify the customer
as soon as possible. Also, you will be
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Useful Information
manufacturer about the availability of
Hearing Aids which provide adequate
shielding to RF energy commonly emitted
by digital devices.
encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
WHEN PROGRAMMING EMERGENCY
NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to
the dispatcher the reason for the call.
2) Perform such activities in the off-peak
hours, such as early morning or late
evenings.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
Some cordless telephones operate at
frequencies that may cause interference to
nearby TVs and VCRs. To minimize or
prevent such interference, the base of the
cordless telephone should not be placed
near or on top of a TV or VCR. If
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
interference is experienced, move the
cordless telephone further away from the TV
or VCR. This will often reduce or eliminate
interference.
Privacy of communications may not be
ensured when using this phone.
FCC RF Exposure Warning:
L This product complies with FCC radiation
exposure limits set forth for an
CAUTION:
Any changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate this device.
uncontrolled environment.
L To comply with FCC RF exposure
requirements, the base unit must be
installed and operated 20 cm (8 inches)
or more between the product and all
person’s body (excluding extremities of
hands, wrist and feet).
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
L This product may not be collocated or
operated in conjunction with any other
antenna or transmitter.
L The handset may be carried and operated
with only the specific provided belt-clip.
Other non-tested belt-clips or similar
body-worn accessories may not comply
and must be avoided.
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
Notice
L FCC ID can be found inside the battery
compartment or on the bottom of the
units.
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Useful Information
Compliance with TIA-1083 standard:
Telephone handsets identified with this logo
have reduced noise and interference when
used with T-Coil equipped hearing aids and
cochlear implants.
Compatible with
Hearing Aid T-Coil
T
TIA-1083
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Guía Rápida Española
Guía Rápida Española
Instalación
Unidad base
L Use solo el adaptador de corriente Panasonic PNLV226 incluido.
“Clic”
Oprima firmemente
el contacto.
Gancho
Correcto
Incorrecto
A la toma de
corriente
A la toma de
teléfono de línea
única (RJ11C)
“Clic”
Filtro DSL/ADSL*
*Requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.
Auricular
CARGUE
APROXIMADAMENTE
DURANTE 7 HORAS
L
L
L
UTILICE SOLO baterías de Ni-MH tamaño AAA (R03).
NO utilice baterías Alcalinas, de Manganeso o de Ni-Cd.
Compruebe que las polaridades son las correctas (S, T).
Confirme que
aparezca
SOLO baterías Ni-MH recargables
“Cargando”.
Cargador
A la toma de corriente
L Use solo el adaptador de
corriente Panasonic
PNLV226 incluido.
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Guía Rápida Española
Sugerencias de operación
Teclas de función
El auricular incluye 3 teclas de función. Al oprimir una tecla de
función, puede seleccionar la función que aparece directamente
encima de ella en la pantalla.
CEL.
{C
},
{
MENU
},
{CEL.} y otras funciones adicionales se
asignan a las teclas de función. Preste atención a la pantalla
para ver qué funciones están asignadas a las teclas de función
durante la operación del auricular.
Tecla de volumen
Oprima {+}
receptor o del altavoz mientras habla.
o
{-} repetidamente para ajustar el volumen del
Tecla navegadora
{^}, {V},
elementos.
CID (identificador de llamadas): Vea la lista de personas
que llamaron.
REDIAL (Remarcación): Vea la lista de remarcación.
{
<
}, o
{>}: Navegue por diversas listas y
{
<}
{^}
{V}
{>}
{<}
{>}
Cambio de idiomas (predeterminado: “English”) (Auricular)
Cuando instale las baterías por primera vez, es posible que aparezca
Oprima OFF para salir.
Idioma de la pantalla
MENU 11) s
“Date and time Press SELECT”.
{
}
{
}
(
{r
}
:
:
“Español”
s
s
{
GUARDA
}
}
s
s
{
OFF
}
}
Idioma de la guía de voz
MENU 112
{
}
(
s
{r
}
“Español”
{GUARDA
{OFF
Fecha y hora (Auricular)
1
2
3
4
{
MENU
Introduzca el día, mes y año actuales.
Introduzca la hora y minuto actuales (formato de reloj de 24 horas).
GUARDA OFF
}
(1)1
s
{OK}
{
}
s
{
}
Cómo grabar el mensaje de saludo del contestador de llamadas para
la línea terrestre (Auricular)
Si utiliza un mensaje de saludo pregrabado, no es necesario que grabe su propio mensaje de saludo.
1
2
{
MENU
}
(
3
)
2
s
{
r
}
:
“Sí”
s
{SELEC.}
Después de que suene un pitido, sostenga el auricular a una distancia aproximada de 20 cm (8
pulgadas) y hable con claridad en el micrófono (máx. de 2 minutos).
3
Oprima
{
ALTO
}
para dejar de grabar.
s
{OFF}
Download from Www.Somanuals.com. All Manuals Search And Download.
74
Guía Rápida Española
Enlace a celular
Puede usar la unidad para hacer o contestar llamadas usando una línea de teléfono celular. Sus teléfonos
®
celulares deben tener tecnología inalámbrica Bluetooth compatible con este producto. Para obtener más
L
Coloque su teléfono celular cerca de la unidad base. Si su teléfono celular está demasiado cerca de la
unidad base durante la llamada celular, es posible que escuche ruido. Para un mejor funcionamiento, le
recomendamos que coloque su teléfono celular de 0.6 m a 3 m (2 pies a 10 pies) de la unidad base.
Línea celular
Proveedor de servicio
del teléfono celular
Cómo registrar un teléfono celular con Bluetooth
1
2
3
Auricular:
Para CELL 1:
Para CELL 2:
{
MENU
}
}
(
(
6241
6242
{MENU
L
Después de que el indicador de CELL 1 o CELL 2 comience a parpadear en rojo en la unidad base, el
resto del procedimiento debe completarse en menos de 5 minutos.
Su teléfono celular:
Mientras el indicador de CELL 1 o CELL 2 está parpadeando en rojo, siga las instrucciones de su teléfono
celular para entrar al modo de registro.
L
Dependiendo de su teléfono celular, es posible que le pida que introduzca el NIP de la unidad base
(predeterminado: “0000”).
Auricular:
Espere a que se emita un pitido largo.
L
L
Es posible que tarde más de 10 segundos en completar el registro.
Cuando el indicador de CELL 1 o CELL 2 se ilumina en verde, esto significa que el teléfono celular está
conectado a la unidad base. Ya está listo para hacer llamadas regulares de celular.
4
5
Para seleccionar qué unidad recibe llamadas para la línea celular (predeterminado: “Todo”):
OK GUARDA
L
{
}
s
Si no se requiere, vaya al paso 5.
{
r
}: Seleccione el auricular deseado o “Todo”.
s
{
}
{
OFF
}
Nota:
L
Asegúrese de que su teléfono celular está configurado para conectar este producto automáticamente.
Consulte las instrucciones de operación de su teléfono celular.
Marcas registradas
La marca denominativa y los logotipos de Bluetooth son propiedad de Bluetooth SIG, Inc. y cualquier uso
®
L
de dichas marcas por parte de Panasonic Corporation se hace bajo licencia. Todas las demás marcas
comerciales que se identifican en el presente pertenecen a sus respectivos propietarios.
Download from Www.Somanuals.com. All Manuals Search And Download.
75
Guía Rápida Española
Enlace a celular
Unidad base: Indicadores CELL 1/CELL 2
Estado
Significado
Verde (encendido)
Un teléfono celular está conectado. Listo para hacer o recibir llamadas
celulares.
Verde (parpadea)
La línea del celular se está usando.
Las entradas del directorio telefónico se están copiando desde un teléfono
celular.
Verde
Se está recibiendo una llamada de celular.
(parpadea rápidamente)
Ámbar (encendido)
No hay un teléfono celular conectado a la unidad base.
La unidad base está buscando el teléfono celular registrado.
Ámbar
(parpadea rápidamente)
Rojo (parpadea)
Luz apagada
Una llamada de celular se pone en espera.
No hay un teléfono celular registrado en la unidad base.
Auricular: enlace a elementos de la pantalla del celular
Se está usando una línea de celular.
t
L
L
Cuando parpadea: La llamada de celular se pone en espera.
Cuando parpadea rápidamente: Se está recibiendo una llamada de celular.
*1
Un teléfono celular está conectado. Listo para hacer o recibir llamadas celulares.
1
2
]
L Cuando está apagado: No hay un teléfono celular conectado a la unidad base.
*1 La línea o líneas celulares correspondientes se indican enseguida del elemento.
uv
Está recibiendo una llamada de celular en esa línea.
Cómo conectar o desconectar el teléfono celular
Conexión automática al teléfono celular
La unidad se conecta al teléfono celular a intervalos regulares si se pierde la conexión. Consulte las
instrucciones de operación para cambiar el intervalo (predeterminado: “1 min”).
Cuando está usando una línea celular o un audífono con Bluetooth, la unidad base pierde la conexión de
L
otros dispositivos con Bluetooth (teléfono celular o audífono). Para restablecer la conexión a los teléfonos
celulares automáticamente, deje encendida la conexión automática.
Cómo conectar o desconectar manualmente el teléfono celular
Cuando haga o conteste llamadas con su teléfono celular, le recomendamos que lo desconecte de la unidad
base; de lo contrario, es posible que no escuche el audio que reciba en su teléfono celular.
También puede reconectar manualmente el teléfono celular a la unidad base sin esperar a que la función de
conexión automática reanude la conexión.
1
Para conectarlo o desconectarlo:
Para CELL 1:
Para CELL 2:
{
MENU
}
}
(
(
6251 (suena un pitido largo.)
6252 (suena un pitido largo.)
{MENU
2
{OFF}
Download from Www.Somanuals.com. All Manuals Search And Download.
76
Guía Rápida Española
Enlace a celular
Modo exclusivo para la línea celular (si no utiliza la línea terrestre)
Si no utiliza la línea terrestre, configure el modo exclusivo para la línea celular para usar esta unidad en forma
más conveniente.
1
2
{
MENU
Para encenderlo:
Para apagarlo:
}
(157
{
r
:
}
:
“Encendido”
s
{
SELEC.
}
s
{r
}:
“Sí”
s
{SELEC.}
{r
}
“Apagado” SELEC.}
s
{
Operaciones básicas
Cómo hacer y contestar llamadas (Auricular)
Para hacer llamadas de celular
1
Marque el número telefónico.
s
{
CEL.
Cuando el modo exclusivo para la línea celular está configurado,
también puede oprimir {C}/{s} en lugar de CEL.
}
L
{
}.
L
Cuando solo hay 1 teléfono celular registrado, la unidad comienza
a marcar.
2
Cuando hay 2 teléfonos celulares registrados:
}: Seleccione el teléfono celular deseado.
{r
s
{SELEC.}
Para hacer llamadas por la línea Marque el número telefónico.
terrestre
s
{C}/{s}
Para contestar llamadas
Para colgar
{C}/{s}
OFF
{
}
Para ajustar el volumen del
receptor o del altavoz
Oprima {+}
o
{-} repetidamente mientras habla.
}: Seleccione el número telefónico deseado.
Cómo hacer una llamada usando
la lista de remarcación
1
{>
}
REDIAL
s
{r
2
Para hacer una llamada celular:
Cuando solo hay 1 teléfono celular registrado:
o
{CEL.}
Cuando hay 2 teléfonos celulares registrados:
{
CEL.
}
s
{
r
}: Seleccione el teléfono celular deseado.
s
{SELEC.}
Para hacer una llamada terrestre:
{C}
Cómo hacer y contestar llamadas (Unidad base: Serie KX-TG7741)
Para hacer llamadas de celular
{
CELL 1
L
}
/
{
CELL 2
Cuando el modo exclusivo para la línea celular está configurado,
también puede oprimir SP-PHONE en lugar de CELL 1 CELL 2
}
s
Marque el número telefónico.
{
}
{
}
/
{
}.
Para hacer llamadas por la línea
terrestre
{
SP-PHONE
}
s
Marque el número telefónico.
Para contestar llamadas
Para colgar
{
SP-PHONE
}
}
o
{SP-PHONE
Para ajustar el volumen del
altavoz
Oprima {+}
{-} repetidamente mientras habla.
Download from Www.Somanuals.com. All Manuals Search And Download.
77
Guía Rápida Española
Operaciones básicas
Cómo hacer y contestar llamadas (Unidad base: Serie KX-TG7741)
Remarcación del último número
marcado
1
2
Para hacer una llamada celular:
Para hacer una llamada terrestre:
REDIAL
{
CELL 1
}
/
{
CELL 2
}
}
{SP-PHONE
{
}
Para ajustar el volumen del timbre (Auricular)
Para ajustar el volumen del timbre
del auricular (línea de celular)
1
2
Para CELL 1:
Para CELL 2:
{
MENU
}
}
(
(
6281
6282
{MENU
{
r
}: Seleccione el volumen deseado.
MENU 16
}: Seleccione el volumen deseado.
s
s
{
GUARDA
}
}
s
s
{
OFF
}
}
Para ajustar el volumen del timbre
del auricular (línea terrestre)
1
2
{
{
}
(
)
r
{GUARDA
{OFF
Para ajustar el volumen del timbre
de la unidad base (línea celular)
1
2
Para CELL 1:
Para CELL 2:
{
MENU
}
}
(*6281
(*6282
{MENU
{
r}: Seleccione el volumen deseado.
s
{
GUARDA
}
s
{OFF}
Para ajustar el volumen del timbre
de la unidad base (línea terrestre)
1
2
{
MENU (*16)
}: Seleccione el volumen deseado.
}
{r
s
{
GUARDA
}
s
{
OFF
}
Directorio telefónico compartido (Auricular)
Para añadir entradas
1
2
3
{
C
}
s
{
AÑAD.
Introduzca el nombre de la persona (máx. 16 caracteres).
Introduzca el número telefónico de la persona (máx. 24 dígitos).
}
s
{
OK
}
s
{OK
}
4
{r
}: Seleccione el grupo deseado.
s
{
SELEC.
}
2 veces
s
{OFF}
Para hacer llamadas
1
2
{
C
}
s
{r}: Seleccione la entrada deseada.
Para hacer una llamada celular:
Cuando solo hay 1 teléfono celular registrado:
o
{CEL.}
Cuando hay 2 teléfonos celulares registrados:
{
CEL.
}
s
{
r
}: Seleccione el teléfono celular deseado.
s
{SELEC.}
Para hacer una llamada terrestre:
{C}
Contestador de llamadas de la línea terrestre (Unidad base)
Contestador encendido/apagado Oprima
{ANSWER ON/OFF} para encender y apagar el contestador de
llamadas.
Para escuchar mensajes
{6
}
(PLAY)
Contestador de llamadas de la línea terrestre (Auricular)
Para escuchar mensajes
Para escuchar mensajes nuevos:
MENU 323
Para escuchar todos los mensajes:
MENU 324
{
}
(
{
}
(
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Guía Rápida Española
Cómo usar dispositivos Bluetooth
Copiado de entradas del directorio telefónico desde un teléfono celular con Bluetooth (transferencia
del directorio telefónico)
Puede copiar entradas del directorio telefónico desde los teléfonos celulares registrados o desde otros
teléfonos celulares (no registrados) al directorio telefónico compartido de la unidad.
1
2
Auricular:
Auricular:
{
MENU
}
(618
Para copiar desde teléfonos celulares registrados:
SELEC.}
{
r
L
}: Seleccione el teléfono celular deseado.
Los elementos copiados se almacenan en el grupo (“Cel. 1
el teléfono celular.
s
{
”
o
“Cel. 2”) en el que está registrado
Para copiar desde otros teléfonos celulares (no registrados):
Otro celular SELEC. }: Seleccione el grupo al que desea copiar.
{
r}:
“
”
s
{
}
s
{r
s
{SELEC.}
3
Cuando aparezca “Transf. datos del directorio del celular” : Vaya al paso 4.
Cuando aparezca el menú “Selec. modo” :
{
r
“
}: Seleccione
Auto”: Descargue todas las entradas del teléfono celular automáticamente. Vaya al paso 5.
Manual”: Copie las entradas que seleccionó.
El menú Selec. modo aparece solo cuando el teléfono celular soporta PBAP (Perfil de Acceso a
Directorio Telefónico) para la conexión Bluetooth.
“
Auto
”
o
“
Manual
”
.
s
{SELEC.}
“
L
“
”
4
5
Teléfono celular:
Siga las instrucciones de su teléfono celular para copiar las entradas del directorio telefónico.
L
Para otros teléfonos celulares (no registrados), necesita buscar y seleccionar la unidad base. Es
posible que requiera el NIP de la unidad base (predeterminado:
Las entradas que se están copiando aparecen en el auricular.
“0000”).
L
Auricular:
Espere a que aparezca
“
Completo
”
.
s
{OFF}
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Guía Rápida Española
Cómo usar dispositivos Bluetooth
Cómo usar un audífono Bluetooth (opcional) para llamadas por la línea terrestre
Al registrar un audífono Bluetooth en la unidad base, podrá tener conversaciones inalámbricas a manos
libres para llamadas por la línea terrestre.
L
La conexión del audífono con Bluetooth no está disponible mientras alguien se encuentra usando la línea
celular.
Cómo registrar un audífono en la unidad base
Registre usando el auricular.
1
Su audífono:
Configure su audífono en modo de registro.
L
Consulte las instrucciones de operación de su audífono.
Auricular:
MENU
2
{
}
(621
Registro
3
4
Introduzca el NIP de su audífono.
L
Por lo general, el NIP predeterminado es “0000”. Consulte las instrucciones de operación del
audífono.
Oprima
{
OK}, y después espere a que se emita un pitido largo.
s
Cuando el indicador HEADSET de la unidad base se ilumina en verde, usted está listo para usar el
{OFF}
L
audífono.
Cómo operar un audífono inalámbrico con Bluetooth usando una línea terrestre
Consulte las instrucciones de operación de su audífono para ver cómo funciona.
N
Cómo contestar llamadas de la línea terrestre con su audífono
Para contestar una llamada de línea terrestre, encienda su audífono. Para ello, consulte las instrucciones
de operación de su audífono.
Cuando termine de hablar, apague su audífono. Para ello, consulte las instrucciones de operación de su
audífono.
L
Si no puede colgar la llamada usando su audífono;
oprima
oprima
{
}
(STOP) en la unidad base. (serie KX-TG7731)
{
SP-PHONE en la unidad base 2 veces. (serie KX-TG7741)
}
N
Cómo cambiar entre la unidad base y su audífono
Puede cambiar entre la unidad base y su audífono:
durante una llamada por una línea terrestre con el altavoz de la unidad base. (serie KX-TG7741)
durante una llamada de intercomunicador entre la unidad base y el auricular. (serie KX-TG7741)
*1
mientras escucha los mensajes grabados en el contestador de llamadas de la unidad base.
Serie KX-TG7741
Para cambiar a su audífono:
Oprima
Para cambiar a la unidad base:
Oprima SP-PHONE en la unidad base.
*1 Serie KX-TG7731
{HEADSET} en la unidad base.
{
}
L
Solo puede cambiar entre la unidad base y su audífono. Encienda el audífono. Para ello, consulte las
instrucciones de operación de su audífono.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
Guía Rápida Española
Preguntas frecuentes
Pregunta
Causa y solución
¿Por qué aparece
_
?
L
L
El auricular está demasiado lejos de la unidad base. Acérquelo.
El adaptador para corriente de la unidad base no está conectado
correctamente. Conecte de nuevo el adaptador para corriente a la unidad
base.
L
El auricular no está registrado en la unidad base. Regístrelo.
1
2
Auricular:
Unidad base: Oprima y mantenga oprimido
aproximadamente 5 segundos hasta que suene el tono de registro.
{
MENU
}
(13)
{
LOCATOR} durante
3
Auricular: Oprima {OK}, y después espere hasta que suene un
pitido largo.
¿Por qué no es posible
registrar un teléfono celular a
la unidad base?
L
L
Dependiendo de la compatibilidad del teléfono celular, es posible que no
pueda registrarlo en la unidad base. Para obtener más información, visite
Confirme que la función de Bluetooth de su teléfono celular esté
encendida. Es posible que necesite encender esta función dependiendo
de su teléfono celular.
¿Por qué no es posible
escuchar el tono de
L
Asegúrese de que la luz indicadora de CELL 1 o CELL 2 se ilumine en
verde y de que el teléfono celular esté conectado a la unidad base.
El teléfono celular no se ha registrado en la unidad base. Regístrelo.
marcación? (línea de celular)
L
L
¿Cómo se incrementa el nivel
de volumen del auricular?
Oprima la tecla de volumen {+} repetidamente mientras habla.
¿Por qué hay ruido o se corta
la conversación?
L
L
Trate de reubicar la unidad base de forma que se minimice la distancia al
auricular.
Si ocurre el mismo problema aunque el auricular se encuentre enseguida
de la unidad base, llame a soporte al cliente de Panasonic al 1-800-211-
PANA (1-800-211-7262).
¿Es posible añadir otro
auricular accesorio a mi
unidad base?
L
L
Sí, puede añadir hasta 6 auriculares (incluyendo los que se venden con
su unidad base) a una sola unidad base.
Para adquirir auriculares accesorios adicionales (KX-TGA470), visite
o llame al 1-800-332-5368. Los usuarios TTY (usuarios con
impedimentos auditivos o del habla) pueden llamar al 1-866-605-1277.
¿Es posible mantener
cargando las baterías todo el
tiempo?
L
L
Puede dejar el auricular en la unidad base o el cargador en cualquier
momento. Esto no daña las baterías.
¿Cómo se contestan las
llamadas en espera (segunda
llamada)?
Oprima {CALL WAIT} cuando escuche el tono de llamada en espera.
Para obtener más información acerca del registro, visite
http://www.panasonic.com/RegisterYourHandset (solo en inglés)
Download from Www.Somanuals.com. All Manuals Search And Download.
81
Appendix
Customer services
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at: 1-800-211-PANA (1-800-211-7262),
Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST.
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday - Friday 9 am to 9 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and
Personal Checks.)
TTY users (hearing or speech impaired users) can call 1-866-605-1277.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Appendix
Warranty (For United States and Puerto Rico)
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Telephone Products
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length
of the period indicated on the chart below, which starts with the date of original purchase
(“Limited Warranty period”), at its option either (a) repair your product with new or
refurbished parts, or (b) replace it with a new or a refurbished product. The decision to
repair or replace will be made by the warrantor.
Parts
Labor
One (1) Year
One (1) Year
During the “Labor” Limited Warranty period there will be no charge for labor. During the
“Parts” Limited Warranty period, there will be no charge for parts. You must mail-in your
product prepaid during the Limited Warranty period. This Limited Warranty excludes both
parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty
only applies to products purchased and serviced in the United States or Puerto Rico. This
Limited Warranty is extended only to the original purchaser and only covers products
purchased as new.
Ship-In Service
For assistance in the continental United States and Puerto Rico in obtaining repairs please
ship the product prepaid to:
Panasonic Exchange Center,
4900 George McVay Drive, Suite B Door #12, McAllen, TX 78503
Online Repair Request
To submit a new repair and for quick repair status visit our web site at
When shipping the unit carefully pack in a padded shipping carton, include all
accessories, and send it prepaid. Include a letter detailing the complaint, a return
address and provide a day time phone number where you can be reached. P.O. Boxes
are not acceptable. Keep the tracking number for your records. A copy of valid registered
receipt is required under the 1 year parts and labor Limited Warranty.
For Limited Warranty service for headsets if a headset is included with this
product please follow instructions above.
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,
AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH
PROOF OF PURCHASE.
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Appendix
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship,
and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty
ALSO DOES NOT COVER damages which occurred in shipment, or failures which are
caused by products not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or
rental use of the product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this
excludes damages for lost time, lost calls or messages, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the servicer. The items listed are
not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the exclusions may not
apply to you.
This Limited Warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during or after the
Limited Warranty period, you may contact your dealer or Service Center. If the problem is
not handled to your satisfaction, then write to the warrantor’s Consumer Affairs
Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.
When you ship the product
L Carefully pack your unit, preferably in the original carton.
L Attach a letter, detailing the symptom.
L Send the unit to Panasonic Exchange Center, prepaid and adequately insured.
L Do not send your unit to Panasonic Corporation of North America listed on the back
cover or to executive or regional sales offices. These locations do not repair consumer
products.
Download from Www.Somanuals.com. All Manuals Search And Download.
84
Index
E
Equalizer: 24
Index
F
#
G
H
Groups: 30, 44
Handset
A
Alarm: 40
Locator: 57
Name: 40
Answering calls: 23, 27
Answering system
Call screening: 49
Hold: 23, 28
Intercom: 57
Greeting only: 53
I
Recording time: 53
Toll saver: 53
K
L
Key tone: 37
Line mode: 38
Link to cell
Area code: 21
Auto connection: 19
Connection: 20
Pause: 22, 27
PIN: 21
B
C
Belt clip: 15
Bluetooth wireless technology
Headset: 47
Phonebook transfer: 46
M
P
Call block: 41
Call waiting: 24, 28
Call Waiting Caller ID: 24
Caller list: 44
Cellular calls: 22, 27
Cellular phone
Deregistration: 21
Chain dial: 32
CID (Caller ID): 44
Control type: 15
Ringer ID: 44
Ringer tone: 35, 37, 44
R
S
T
Silent mode: 40
Talking Caller ID: 43
Time adjustment: 36
TTY: 82
VM (Voice mail): 55
Voice mail: 53, 55
Volume
Receiver: 22
Speaker: 22, 27
V
D
Dialing mode: 17
Direct command code: 33
Display
Contrast: 37
Language: 17
Download from Www.Somanuals.com. All Manuals Search And Download.
85
Index
W
Wall mounting: 59
Download from Www.Somanuals.com. All Manuals Search And Download.
86
Notes
Download from Www.Somanuals.com. All Manuals Search And Download.
87
IMPORTANT!
If your product is not working properly. . .
1 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4 Read troubleshooting page in the Operating Instructions.
L
FAQ and troubleshooting hints are available.
For your future reference
We recommend keeping a record of the following information to assist with any repair under
warranty.
Serial No.
Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
One Panasonic Way, Secaucus, New Jersey 07094
© Panasonic System Networks Co., Ltd. 2011
Printed in China
*TG7731*
*TG7731*
PNQX5106YA TT1111MG2122 (D)
Download from Www.Somanuals.com. All Manuals Search And Download.
|