LCD TV
TFTV-430 USER'S MANUAL
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
NOTE TO CABLE/TV INSTALLER:
CAUTION
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual,
may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
THE LIGHTNING FLASH WITH
ARROW-HEAD SYMBOL WITHIN AN
EQUILATERAL TRIANGLE IS
INTENT TO ALERT THE USER TO
THE PRESENCE OF UNINSULATED
"DANGEROUS VOLTAGE" WITHIN
THE UNIT'S CABINET THAT MAY BE
OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
Reorient or relocate the receiving antenna.
THE EXCLAMATION POINT WITHIN
AN EQUILATERAL TRIANGLE IS
INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE
MANUAL ACCOMPANYING THE UNIT.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THE UNIT TO RAIN OR
MOISTURE. NEVER ATTEMPT TO OPEN THE
CABINET, DANGEROUS HIGH VOLTAGES ARE
PRESENT IN THE UNIT. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
When in use, there must be a distance at
least 5cm between the TV and some object
front or back of it, at least 1 cm between the
TV and some object leftward or rightward of it .
CAUTION:
NOTE TO CABLE/TV INSTALLER:
Do not attempt to modify this product in any way
without written authorisation from PALSONIC
Corporation Pty Ltd. Unauthorised modification
could void the user's authority to operate this
product.
This reminder is provided to call the cable TV
system installer's attention to Article 820-40 of
the National Electric Code (U.S.A.). The code
provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall
be connected to the grounding system of
the building, as close to the point of the cable entry
as practical.
RECORD YOUR MODEL NUMBER
(Do this now, while it is convenient)
The model and serial number of your Machine are
located on the back of the TV cabinet. For your
future convenience, we suggest that you record
these numbers here:
Wet Location Marking C-UL
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
MODEL
NO.
SERIAL
NO.
-1-
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart. Apparatus
combination to avoid injury from tip-cover.
1. Read These Instructions - All the safety and
operating instructions should be read before the
product is operated.
2. Keep These Instructions - The safety and operating
instructions should be retained for future reference.
3. Heed All Warnings - All warnings on the product and
the operating instructions should be adhered to.
4. Follow All Instructions - All operating and use
instructions should be followed.
5. Do not use this product near water - Do not use this
product near water for example, near a bathtub,
wash bowl, kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool; and the like.
PORTABLE CART WARNING
(Symbol provided by RETAC)
6. Clean only with dry cloth - Unplug this product from
the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use dry cloth for
cleaning.
13. Unplug this apparatus during lightning storms
or unused for long period of time.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer instructions.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
8. Do not install near any heat sources such as
radiators, heat register, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarised
grounding-type plug. A polarised plug has two
blades with one wider than the other. A grounding
type plug has two blades and third grounding prong.
The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your
outlet consult an electrician for replacement of the
obsolete outlet.
15. This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your product dealer
or local power company. For products intended to
operate from battery power, or other sources,
refer to the operating instructions.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
16. Protective Attachment Plug -The product is
equipped with an attachment plug having
overload protection. This is a safety feature. See
Instruction Manual for replacement or resetting of
protective device. If replacement of the plug is
required, be sure the service technician has used
a replacement plug specified by the manufacturer
that has the same overload protection as the
original plug.
11. Only use attachments and accessories specified
by the manufacturer.
-2-
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
23. Outdoor Antenna Grounding - If an outside
antenna or cable system is connected to the
product, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode. See figure below.
17. Power Lines - An outside antenna system should
not be located in the vicinity of overhead power
lines or other electric light or power circuits, or
where it can fall into such power lines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fatal.
18. Overloading - Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
19. Object and Liquid Entry - Never push objects of
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
20. Replacement Parts - When replacement parts
are required, be sure the service technician has
used replacement parts specified by the
manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
21. Safety Check - Upon completion of any service
or repairs to this product, ask the service technician
to perform safety checks to determine that the
product is in proper operating condition.
22. Wall or Ceiling Mounting -The product should be
mounted to a wall or ceiling only as recommended
by the manufacturer. Any mounting of the product
should follow the manufacturer instructions, and
should use a mounting accessory recommended
by the manufacturer.
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Description
Overview of TV
Press to display the menu of the available viewing sources.
Press to display the OSD menu.
Press to change the channel.
The two buttons also act as direction buttons.
Press to adjust volume level.
The two buttons also act as direction buttons.
Turn on/off the TV.
Speakers
Speakers
Indicator
Remote control sensor
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
Back Panel Description
Overview of TV
Headphone
Power Input
Antenna Jack
S-Video or Composite input
Progressive input
RGB input
AV input
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Connections
* For optimum picture quality, adjust antenna direction.
Indoor Antenna Connections
Typical Wall antenna jack used in apartment buildings, connect the antenna cable as shown
below (Please use the correct type of antenna cable according to the type of wall antenna jack).
75 ohm Round Cable
Bronze Wire
300 ohm Flat Wire
Apartment buildings
Antenna Converter
Wall Connection Jack
*If you have a 75 ohm round cable, insert the bronze wire and then tighten the connection nut.
*If you have a 300 ohm flat wire, connect the twisted wire to the antenna converter and then connect
the converter to the antenna jack on the TV.
* When using 75 ohm round cable, please do not bend the bronze wire, it may make the video
quality poor.
Outdoor Antenna Connections
This type of antenna is commonly used in single family dwellings.
75 ohm Round Cable
VHF Antenna
UHF Antenna
300 ohm Flat Wire
Antenna Converter
Single Family Home
UHF
VHF
* In poor signal areas, to get better picture quality,
install the antenna as shown to the right.
* You can share the antenna with a signal splitter
for two TV sets.
75 ohm Round Cable
Signal
Amplifier
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
AV Connections
(Yellow)
(White) (Red)
Camcorder
Disc Player
VCR
Notes:
You can connect the TV set with Disc player, Camcorder and VCR following the methods below :
1: S-Video Cable + Audio Cable.
Please choose "S-Video" when you select the viewing source.
2: Video Cable + Audio Cable.
Please choose "AV" when you select the viewing source.
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Player Connection
(White) (Red)
(White) (Red)
DVD Player
Notes:
Please refer to the methods below to connect TV with DVD Component signal:
1. Connect YCbCr Cable and Audio Cable to corresponding Jacks of DVD
Please choose the "YCbCr" when you select viewing source.
2. Connect Progress Scan Cable and Audio Cable to the corresponding jacks of DVD.
Please choose "YPbPr" when you select viewing source.
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Connections
Set-top Box
Notes:
Please refer to the upward method to connect TV with set-top Box or PC.
1. Connect VGA Cable and Audio Cable to the corresponding jack of PC or Set-top Box.
Please choose "PC" or "YPbPr" when you select viewing source.
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Overview (All Functions Except Teletext)
MUTE
Power button
Display status
1
Numeric buttons
One/double/tri-digit select
Channel list
Previous channel
Select different viewing signals
Enter OSD setup mode
Exit
Enter
Next/previous channel
Sound mode selection
Volume up/down
Dual sound selection
Select image display mode
Aspect
To freeze current image
To set sleep power off time
PIP function
Play/Pause
Rotate
Image page up and down
Zoom in/out
Stop
Nine pictures
-10-
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Overview (Teletext Functions)
On Screen Display
Sound Off
Power ON/Standby button
1
Teletext Page Up
Teletext Cancel
Teletext Index
Teletext Page Down
Teletext List/Flof
Teletext Reveal
Teletext Display/Mix
Teletext Store
Teletext Size
Teletext Hold
Teletext Sub-Page
-11-
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Operation
Batteries installation
Remote control direction
Point the remote control at the remote sensor.
Pull the battery cover
upward in the direction
shown by the arrow
and remove it.
Insert the batteries
with correct polarity.
Replace the battery
compartment cover.
Don't place the remote control
near a heater or in a damp
place. A strong impact on
Make sure there are no
objects between the
remote control and its
sensor.
Signal from the remote con-
trol may be disturbed by sun
light or other strong light. In
this case, darken the room.
remote control may damage it.
Adjusting the vertical TV Viewing Angle
Rotatable Stand
Rotatable Panel
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Turn On/Off
1. Connect the antenna cable to the antenna input port on TV.
2. Connect the adapter to the power input port on TV.
3. Put the power line plug into the jack of adapter.
4. Plug the power cord into the wall power outlet after connecting the power cord to the adapter.
Then the TV will be in standby mode.
5. Press "POWER" button on the remote control to turn on the TV.
6. Select viewing source:
Press the " SOURCE" button to display "Select source" menu as follows:
Use the direction buttons to select desired signal, and press " ENTER" button to confirm.
7. After viewing, press the "POWER" button on the remote control. The TV reverts to
stand-by mode.
8. In standby mode, the power consumption is less the 3 watts per hour. If you do not use the TV
set usually, please disconnect the AC adapter and the jack after viewing.
-13-
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Menu Description
If you want to adjust the display settings, please follow the instruction below.
Press the "MENU" button to browse the PICTURE MENU, TV MENU,OPTION MENU, PC MENU
in turn. Press "EXIT" to quit menu mode.
TV
Brightness 64 -
TV
Picture
Option
PC
Picture
Option
PC
+
+
+
+
Channel Preset
Channel Exchange
Program
Contrast
Colour
59 -
25 -
0
Tint
6
-
Skip Channel
Off
Sharpness
Middle
(PICTURE MENU)
(TV MENU)
TV
TV
Picture
Option
PC
Picture
Option
PC
OSD Set
3
4
+
H Position
V Position
Clock
-
-
Timer Setting
+
+
+
Display Setting
Teletext Setting
900
10
-
-
Phase
(PC MENU)
(OPTION MENU )
-14-
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Menu
Menu Operation
Display Performance Adjust
You can adjust brightness, contrast and colour to meet your favourite picture requirement.
TV
Brightness 64 -
Picture
Option
PC
Press the "MENU" button to select " Picture" mode.
+
+
+
+
Press "
Press "
" buttons to select the item you want to adjust.
" buttons to reach the desired setting.
Contrast
Colour
59 -
25 -
Tint
6
-
Sharpness
Middle
Press " EXIT" button to quit.
Note:
1. In PC and YPbPr modes, only "Brightness/ Contrast" items are available.
2. "Tint" can be adjusted in NTSC system only.
-15-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Menu
Menu Operation
Channel Setting --- Auto Searching
You can set TV program list with Auto Searching function quickly.
TV
Press the "MENU" button to select "TV" mode.
Press the "
" buttons to select "Channel Preset".
Channel Preset
Press the " " button to enter "Channel Preset".
Press the " " buttons to select "Auto Searching".
Auto Searching
Fine Tune
Manual Searching
TV SYS
B/G
Press " " button, the TV will search channels automatically.
All channels will be saved once searching finished, and the
TV will display the program of channel 0.
Auto Searching
10
VL
In the course of auto searching, you can press "EXIT" to
stop the searching process.
Press (EXIT) to escape
-16-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Menu
Menu Operation
Channel Setting --- Fine Tune
-
"Fine tune" helps you adjust specific programs image and sound quality.
TV
Press the "MENU" button to select "TV" mode.
Press the "
" buttons to select "Channel Preset".
Channel Preset
Press the " " button to enter "Channel Preset".
Press the " " buttons to select "Fine Tune".
Auto Searching
Fine Tune
Manual Searching
TV SYS
B/G
Fine Tuning
Select "Fine Tune" and press " " button to enter the item .
Press " " buttons to get satisfying effect, and press
"EXIT" to quit Fine Tune.
10
VL
(
) or ( ) key to change
-17-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Menu
Menu Operation
Channel Setting --- TV system switch
You can also set program list one by one by "Manual searching" function.
TV
Press the "MENU" button to select "TV" mode.
Press the "
" buttons to select "Channel Preset".
Press the " " button to enter "Channel Preset".
Press the " " buttons to select "Manual Searching".
Channel Preset
Manual Searching
Press the " " button to enter "Manual Searching".
Press " " buttons to change frequency band, and press
" buttons to search channels, when a channel is
"
found, the searching process will stop, the channel will
be saved with the current channel number.
If the program is not your expected one, please press "
searching.
" buttons to continue the
Press" EXIT " to quit "Manual Searching" mode .
-18-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Menu
Menu Operation
Channel Setting --- TV system switch
You can change TV system by yourself if necessary.
TV
Picture
Option
PC
Press the "MENU" button to select "TV" mode.
Channel Preset
Channel Exchange
Program
Press the "
" buttons to select "Channel Preset".
0
Skip Channel
Off
Channel Preset
Press the " " button to enter "Channel Preset".
Auto Searching
Fine Tune
Press the "
Press "
" buttons to select "TV SYS".
" buttons and choose the suitable system for
Manual Searching
TV SYS
local TV signal: B/G , D/K.
B/G
Note:
The default setting complies with the local TV broadcasting system.
-19-
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Menu
Menu Operation
Channel Setting --- Channel Exchange
If you'd like to exchange the two channels, please use "Channel Exchange".
Select current channel from one of the two channels to
TV
Picture
Option
PC
be exchanged. Press the "MENU" button to select "TV" mode.
Channel Preset
Channel Exchange
Program
Press "
" buttons to select "Channel Exchange".
0
Press " " button to enter the menu. Input the exchange
channel number (the maximum number is 159), then
press " " button to select "OK ", press "ENTER" button to
save your setting, then the two channel numbers are changed.
Select "Cancel" and press " ENTER" button to quit "Channel
Exchange" mode.
Skip Channel
Off
Current Channel Exchange channel
For example:
Exchange
If you want to exchange channel 5 and channel 1, move to
channel 5 at first. Input "1" with the numerical buttons
in channel exchange window. Select "OK", and press
"ENTER" button to confirm.
7
1
OK
Cancel
Channel Setting --- Skip Channel
If you'd like to skip a channel automatically when you browse program by pressing
"CH+/-" button, please use this function.
Press the "MENU" button to select "TV" mode.
TV
Picture
Option
PC
Press the "
Press "
" buttons to select "Program".
Channel Preset
Channel Exchange
Program
" buttons to select a program number.
0
Then select "Skip Channel" item, press "
" buttons
Skip Channel
Off
to set the option "On ". Then, the channel will be hidden,
when you browse channel by pressing "CH+/-" button.
If you want to cancel "Skip Channel" mode, please set "Off"
on the the "Skip Channel" item.
You can skip one channel or many channels at the same time, but you can still browse
all programs by using "CH-LIST" button when "Skip Channel" is on.
-20-
Download from Www.Somanuals.com. All Manuals Search And Download.
Option Menu
Menu Operation
Option Setting --- OSD setting
If you want to change the OSD setting, please enter this menu.
Press "MENU" button to select "Option" mode.
TV
Picture
Option
PC
Select "OSD Set" item, press " " button to enter.
OSD Set
Timer Setting
Display Setting
Teletext Setting
Press "
Press "
" buttons to select the sub item.
" buttons to change the setting.
Six options of OSD Language:
English / French / Spanish /Russian / Chinese /Arabic.
OSD setting
Nine options of OSD Position:
Upper left / Upper centre / Upper right / Middle left /
Centre / Middle right / Lower left / Lower centre / Lower right.
OSD Language
OSD Position
Eng
Upper left
Opaque
OSD Background
Two options of OSD Background: Opaque / Translucent.
Option Setting --- Timer setting
The TV set can be set to turn ON/OFF automatically as follows.
TV
Picture
Option
PC
Press "MENU" button to select "Option" mode.
Press " " buttons to select the sub item.
OSD Set
Timer Setting
Display Setting
Teletext Setting
Select "Timer Setting" item, press " " button to enter.
Timer setting
Press "
Press "
" buttons to select the sub items.
" buttons to change the setting.
Sleep Time
0
Wake UP Timer
Wake UP Time
Current Time
Off
0: 0
0: 22
Each item is described below:
Sleep time: Press " " buttons repeatedly and cycle through
the preset time intervals (10, 20, 30, 60, 90,120,180, 240min), the TV automatically
switches to standby mode when the timer reaches 0.
Wake up timer: If the timer is not yet set, Off is displayed.
Wake up time: You can set the specific time to wake up your TV. Only valid when Wake up timer
is on.
Current time: Just enter the current time.
-21-
Download from Www.Somanuals.com. All Manuals Search And Download.
Option Menu
Menu Operation
Option Setting --- Colour Temperature Adjust
You can change colour temperature to get a better image effect according to the current
circumstance.
TV
Press "MENU" button to select "Option" mode.
Press " " buttons to select "Display Setting".
Picture
Option
PC
OSD Set
Timer Setting
Display Setting
Teletext Setting
Display setting
Press " " button to enter the sub item.
Color Temperature
PIP Setting
Press "
" buttons to Select "Color Temperature".
Auto Adjust
Aspect
Full Screen
Color Temperature
Press " " button to enter the menu.
Press "
" buttons to change the setting.
Color Temperature
Cold
Note:
You have four options: Cold, Normal, Warm and User mode.
When you select "User Mode", the parameters of
Color Temperature
R,G,B can be adjusted by "
" buttons.
Color Temp
User-R
User mode
127 -
128 -
128 -
+
+
+
User-G
User-B
-22-
Download from Www.Somanuals.com. All Manuals Search And Download.
Option Menu
Menu Operation
PIP Function
PIP means picture in picture, the unit can display a sub window on the screen, which
displays the program from another video source.
This feature is valid when Main Window is in PC mode. You can watch TV or other
video on the sub window.
Please make sure TV set is in PC mode first.
Press "PIP" button to display the "Sub Source" Menu:
PIP
Sub Source
Press the direction buttons to select the source of sub window.
Press "ENTER" button to enter the menu.
SUB WINDOW
MAIN WINDOW
* The input signal of Main Window should be:
1. 1024 x 768 60Hz, PC signal
2. 800 x 600 60Hz, PC signal
3. 640*480
60Hz, PC signal
4. 480P, DVD player VGA signal 60Hz
5. 576P, DVD player VGA signal 50Hz
-23-
Download from Www.Somanuals.com. All Manuals Search And Download.
Option Menu
Menu Operation
Display Performance Adjust
In "PIP" mode, you can adjust sub window as follows.
TV
Picture
Option
PC
Press the "MENU" button to select "Option" mode.
OSD Set
Press the "
" buttons to select "Display Setting".
Timer Setting
Display Setting
Teletext Setting
Display setting
Select "PIP Setting" with "
press " " button to enter.
" buttons and
Color Temperature
PIP Setting
Auto Adjust
Aspect
Full Screen
PIP setting
Press "
Press "
" buttons to select the sub menu.
" buttons to change the setting.
H Position
V Position
Size
-
-
-
-
+
+
+
+
15
25
10
20
Opacity
Note:
The "PIP Setting" is valid only in "PIP" mode.
-24-
Download from Www.Somanuals.com. All Manuals Search And Download.
Option Menu
Menu Operation
Option Setting --- Auto Adjust
You can use this function to adjust the display setting automatically.
TV
Picture
Option
PC
Press "MENU" button to select "Option" mode.
OSD Set
Press "
" buttons to select "Display Setting".
Timer Setting
Press " " button to enter.
Display Setting
Teletext Setting
Press "
" buttons to select "Auto Adjust".
Display setting
Press " " button to enter, then the TV will be in best
performance after "Auto Adjust".
Color Temperature
PIP Setting
Auto Adjust
Note:
Aspect
Full Screen
The "Auto Adjust" setting is valid only in PC mode.
Option Setting --- Aspect
You can adjust display aspect by using this function.
Press "MENU" button to select "Option" mode.
TV
Picture
Option
PC
Press "
" buttons to select "Display Setting".
OSD Set
Timer Setting
Display Setting
Teletext Setting
Press " " button to enter.
Press "
" buttons to select "Aspect" in the display
Display setting
setting item.
Press "
Color Temperature
PIP Setting
" buttons to change the aspect setting:
Auto Adjust
(Five options: Full Screen/Normal/Wide/Cinema/Sub title).
The current aspect will be changed accordingly.
Press "IMAGE" button on the remote control continually to
swap modes.
Aspect
Full Screen
Note:
"Aspect" option haven't that in PC/YPbPr modes.
-25-
Download from Www.Somanuals.com. All Manuals Search And Download.
Option Menu
Menu Operation
Option Setting -- Teletext Setting
In Teletext mode, you can enter the menu and set Teletext language and region.
For the other operations, please refer to page 32.
TV
Picture
Option
PC
Press "MENU" button to select "Option" mode.
Press " " buttons to select "Teletext Setting".
Press " " button to enter.
OSD Set
Timer Setting
Display Setting
Teletext Setting
Teletext setting
Press "
Press "
" buttons to select the item to be changed.
" buttons to adjust the setting.
Eng
West
Language
Region
Press " EXIT" button to quit.
Five options of language: English / Russian / Spanish /
French / Arabic.
Two options of regions: West/East.
-26-
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Menu
Menu Operation
PC Mode
Note: You should set the video signal to "PC" mode before adjusting PC mode setting.
Press "MENU" button to enter " PC " mode.
Press"
Press "
" buttons to select the item to be changed.
" buttons to adjust the setting.
-
-
-
-
Each item is described below:
H Position: Press "
V Position: Press "
" buttons to move the image left or right.
" buttons to move the image up or down.
Clock: To adjust the horizontal frequency of the image.
Phase: To adjust the image phase.
-27-
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Button Instruction
Mute
MUTE
Press the button to mute audio, press again to resume.
Volume Adjustment
Press "VOL+" button to increase the volume;
Press "VOL-" button to decrease the volume.
VOL+/-
Use the numerical buttons to select the channel directly
Press this button one time to display "--"on the screen, the channel range will be
00-99. Use numerical buttons to enter two- digit channel number..
Double press this button to display "---"on the screen, the channel range will be
000-159. Use numerical buttons to enter three-digit channel number.
Channel Shift
CH+/-
In TV mode, press "CH+" button to select next channel, and press "CH-" button
to select prior channel.
Return to previous channel
Press the button to return to the previous channel which you were watching
just now.
For example:
Channel 5 is the previous one you just watched, and channel 10
is the current one you are watching. If you press the button, the TV set will
skip to channel 5. Press it again to return to channel 10.
-28-
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Button Instruction
Browse the channel list
Press "CH-LIST" button, the Channel list will be displayed on screen.
CH-LIST
Channel list
0 CCTV5
5 CV
1 CCTV1
2 CCTV2
3 CCTV3
4 CCTV4
6 CCT
7 CC
8 CTV2
9 CC3
Current channel
Use direction buttons to select specific channel. Use "Page Up" and
"Page Down" button to switch the listing page. Press the "EXIT" button to quit.
Rename Channel
You can rename the channel when you are browsing the channel list.
Press "CH-LIST" button, the Channel list will be displayed on screen.
CH-LIST
Channel list
0 CCTV5
1 CCTV1
2 CCTV2
3 CCTV3
4 CCTV4
5 CV
6 CCT
7 CC
8 CTV2
9 CC3
Use direction buttons to select specific channel.
Press "CH-LIST" button again, the Rename Channel window will be displayed
on the screen as follows:
Rename channel
After inputting the channel name with the numerical
buttons, select "Save", and press "ENTER" to
confirm. Select "cancel" and press "ENTER" to quit.
Rename
CC
Save
Cancel
Note: You can input letters by numerical buttons on the remote control.
For example:
If you want enter "AV01", press
, twice, press
four times continuously,
0
1
then enter the
once &
once . When finishing, you can save it.
-29-
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Button Instruction
Exchange Channel
You can also exchange two channels as follows.
Press the "CH-LIST" button ,the channel list will be displayed on the screen.
CH-LIST
Channel list
0 CCTV5
1 CCTV1
2 CCTV2
3 CCTV3
4 CCTV4
5 CV
6 CCT
7 CC
8 CTV2
9 CC3
Current channel
Use the direction buttons to choose specific channel.
Press left button and the following window will be displayed on the screen.
Exchange
7
1
After inputting the channel number with the numerical buttons.
Select "OK", press "ENTER" button to confirm and quit.
Select "Cancel", press "ENTER" button to cancel and quit.
OK
Cancel
For example:
Input 10, select "OK" then press "ENTER" button to confirm.
The channel 7 will be exchanged with channel 10.
Display Status
In TV mode, press the "DISPLAY" button, the screen will display the current
channel number/ channel name/skip channel status/current time.
Press the "DISPLAY" button again, it will display the TV display mode/audio mode.
Press the-DISPLAY" button three times to exit the display status.
DISPLAY
In PC mode, press the "DISPLAY" button, the screen will display resolution
and frequency information.
If it is not in the above two modes, the screen will display the status of the
current viewing source when you press "DISPLAY" button.
Aspect
ASPECT
Press "ASPECT" button, the following window will be displayed on the screen.
Aspect
Full Screen
Press direction buttons to select your favourite mode.
There are five options: Full Screen/Normal/Wide/Cinema/Sub title.
Note: In PC and YPbPr mode, only "Full Screen/Normal" items are available.
-30-
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Button Instruction
Freeze Image
Press the button to freeze the current image, press it again to exit
FREEZE
the freeze mode.
Note: Not available in PC&YPbPr modes.
Image effect adjustment
After pressing "IMAGE" button, the following window will be displayed on the
up-left corner of the screen:
IMAGE
Image effect
Bright
Press direction buttons or "IMAGE" button to select your
favourite image mode. Four options: Bright / Standard/
Mild and User mode.
Note: Not available in PC&YPbPr modes.
Sound mode adjustment
AUDIO
Press "AUDIO" button to enter the sound effect setting as follows:
Sound setting
Bass
12-
12-
+
+
Treble
Balance
+
12-
Press "
Press "
" buttons to select specific item.
" buttons to adjust.
Clock setup
SLEEP
Press "SLEEP" button to set the sleeping clock as follows:
Time
Sleep time
0
Use "
Use "
" buttons to set the sleeping time
" buttons to set wake up timer.
wake up timer
wake up time
current time
ON
0: 0
0: 22
Use "
Use "
" buttons to choose hour/ minute,
" buttons to set hour/ minute.
Note: You can set the waking up ring only when wake up timer is open.
Dual sound
DUAL I/Il
When in TV mode, you can choose between Stereo and Mono sound during
stereo transmission or choose between Mono / Dual I / Dual II during dual
sound transmission.
-31-
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Teletext is an information system broadcast by certain channels which can be consulted like
newspaper. It also offers access to subtitles for viewers with auditive problems or those who are
not familiar with the transmission language (cable networks, satellite channels, etc.).
Teletext Language Selection.
The default Teletext Language is English. If the Teletext language is not English in your
selection, please kindly change the language according to the instruction on Page 26.
TEXT/MIX
Press the Text/Mix button to activate the Teletext mode. Press again to view the TV program
the teletext page. You can return to normal viewing by press the Text/MIX button for the third time.
LIST/FLOF
Press the List/FLOF button to enter the List mode. Press again to exit List mode.
SIZE
Repeatedly pressing the SIZE button doubles the character size in the following order:
upper half of the page -> Lower half of the page -> Return to normal size.
REVEAL
Press the button once to reveal hidden information (solutions to puzzles, riddles, etc).
This button is applicable only to teletext page with puzzles, riddles, etc. The image will disappear
in 3 seconds.
SUBPAGE --- Viewing of subpage.
Pressing the subpage button to enter the subpage mode. You can use the numerical buttons
directly enter the page number. Then the subpage will be displayed.
To exit, press subpage button again.
AUDIO
IMAGE
DUAL I/II FREEZE
COLOUR BUTTONS IN TOP/FLOF/LIST TELETEXT
Red, green, yellow and cyan fields are shown at the bottom of the screen.
TOP or FLOF teletext (FASTEXT) is transmitted by the station, by pressing the corresponding
colour button on the remote controller, you can select the desired page easily.
-32-
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
STORE
You can store four page numbers in the current channel by pressing Store and numerical buttons.
1. Select the LIST mode using the List/Flof button, then four 3-digit numbers are displayed in
different colours.
2. Press the colour buttons of corresponding page that will be replaced.
3. Enter the new page number using the numerical buttons.
4. Press the STORE button until the corresponding blocks blink.
Notes:
1. Up to four different teletext pages can be stored from channel 0 to channel 40.
2. The remaining channels, channel 41 to channel 159 and AV, all share a common memory:
all of the 4 pages for each of these channels will be the same as those of the lastly stored 4
pages in memory for any channel among these channels.
HOLD
Press the button once to hold page and a second time to release holding of page.
Selecting a page by numeric buttons directly
You can select a page by numerical buttons directly in TEXT mode.
PAGE DOWN/UP
Use these direction buttons to page up/down.
WATCHING TELEVISION DURING TELETEXT MODE
Some pages are continually updated, for example, stock market reports, sports announcements,
and the latest news.
If you want to watch television and stay informed at the same time, press CANCEL button.
Press the CANCEL button again, the teletext page appears with the updated information.
REMOTE CONTROL
You can adjust volume directly using "VOL+/-" and "MUTE".
Notes:
1. The buttons for Teletext function are invalid when menu is being displayed. You can activate
the teletext function buttons by pressing the "EXIT" or "Text/Mix" button.
2. Image freezing function is invalid in TTX/MIX mode. The image freezing mode will exit
automatically when entering Text mode.
-33-
Download from Www.Somanuals.com. All Manuals Search And Download.
Play Flash Memory Card
Play Flash Memory Card
You can enjoy the pictures in your flash card with the TV directly. Several formats files can be
played.
Flash Memory Card
Flash memory card is a small, portable and universal IC recordable card, which has lager
memory capacity than floppy disk.
About E-album
1. Your TV set can display 900 million pixels JPEG picture.
2. JPEG expresses Joint Photographic Experts Group.
Picture format:
--Compress format should be: JPEG
--Files format should be: JPG
Music format:
--MP3, WMA
Insert and pull out the card
CF
1. CF CARD
SM
1. CF card slot.
2. SM CARD
2. SM/SD/MMC/MS card slot.
CF
SM
Please insert the card into the card
slot following the above illustration.
Wrong action may damage the card.
Please pull the card out following the above illustration.
Be tender and careful with your card.
-34-
Download from Www.Somanuals.com. All Manuals Search And Download.
Play Flash Memory Card
Play Music
1. Insert flash memory card into the card slot.
Press the "SOURCE" button to display the main menu and select "Flash Card" with direction
buttons. Then press "ENTER" button to confirm.
2. The following menu will be displayed on the screen:
0:02:40
MENU
Root
File Folder
File
ROOT
Dir 1
Dir 2
Mp3
Dir 4
0
1
2
3
MODE
Folder Normal
FILE:mp3 1
3. Your TV set will play the files at the root. To enter the folder, press "
" button.
For example select Dir2, then press "ENTER" button to display the following menu.
0:02:40
Elapsed time
MENU
0
1
2
3
4
5
9
Back to upper folder
Current Track
Dir1
Dir2
Mp3 1
Mp3 2
Mp3 3
Mp3 4
Mp3 5
Mp3 6
Current Folder
Current file name
MODE
FILE:mp3 1
Folder Normal
If you want to select other tracks, press "PAGE" button directly, or you can press "
to select the desired item in the stop mode.
" buttons
Then press " " or "ENTER" button to play single.
4. Select play mode:
Press " " button to switch "Mode" in stop mode. Press "ENTER" button to select.
The following modes are available: Folder Normal, Folder Repeat, Single Track, Repeat single
Folder Normal ---- Play track from the selected one to the last one, stop automatically when finished;
Folder Repeat ---- Play the track from the list circularly;
Single track ---- Only play the desired item then stop;
Repeat single ---- Repeat the current selected track.
-35-
Download from Www.Somanuals.com. All Manuals Search And Download.
Play Flash Memory Card
Select a folder -- Dirl, then press" ENTER" button and the screen will display as follows.
MENU
..
0
1
2
3
4
5
6
Dir1
001
002
003
004
005
006
Dir2
JPEG
Dir4
MODE
Folder Normal
PLAY/PAUSE
Press "
Press "
" button to pause the slide show.
" again to continue the slide show.
Press "PAGE" button to view previous or next picture.
Press " " button to stop slide show and return to the menu.
ROTATE
Two Rotate modes you can select. Anti-clock wise and clock wise.
Press this button to rotate the picture, the picture will rotate 90 degrees
for each press.
Press this button to rotate the picture deasil, the picture will rotate 90
degrees for each press.
DIGEST
When playing the picture, press this button to display 9 small pictures
on the screen.
DIGEST
Select one of the 9 picture with direction buttons, press "
enlarge the picture to the whole screen.
" button to
In " DIGEST" mode, press " PAGE" button to view previous 9 pictures
or next 9 pictures .
ZOOM
When your set " play the picture", press "ZOOM" button ,the picture
will shift as follows:
ZOOM
Q ZOOM 3/2
Q ZOOM OFF
Q ZOOM 4/3
Q ZOOM 2
In zoom mode, press direction buttons to move the picture.
-36-
Download from Www.Somanuals.com. All Manuals Search And Download.
Stand Uninstallation
Please follow the instructions given.
1. Lay the LCD TV/Monitor face-down on a flat surface with a cushion or other soft materials to
protect the screen.
2. Remove all cables connected on the TV/Monitor
3. Remove the four screws and then remove the stand from the LCD TV/Monitor.
4. Reconnect all cables you removed in step 2.
5. Now you are ready to install Wall/Arm mounting device.
-37-
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Care for your TV
Early malfunctions can be prevented. Careful and regular cleaning can extend the
amount of time you will have with your TV. Be sure to turn the power off and pull out
the plug before you begin any cleaning.
Screen Cleaning
1.
Here is a great way to keep the dust off your screen for a while. Wet a soft
cloth in a mixture of lukewarm water and a little fabric softener or dish
washing detergent. Wring the cloth until it is almost dry, and then use it to
wipe the screen.
2.
Make sure not be excess water put on the screen, let it air-dry before you
turn on your TV.
Cabinet Cleaning
1. Use a soft cloth with a mild soap solution to wipe the cabinet.
2. Rinse the cloth and wipe the cabinet again.
3. Let the cabinet air-dry before turning your TV on.
Extended Absence
If you leave your TV unused for a long time (such as a vacation), it is a good
idea to unplug the power cord to protect against possible damage from lightning
or power surges. If you use an antenna, you may also need to disconnect
it from the back of your TV before leaving.
-38-
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Shooting
Please read this user's manual before using the TV set. If you have any troubles in using this
TV set, try to solve it by the suggestions mentioned below. If you can not remove the trouble
after adopting corresponding suggestions, please contact the technical service centre or
dealer authorised by us. For the sake of your safety, please do not open the cover and repair
by yourself, or it may cause further damage to the TV set, electric shock or fire.
There is no sound but picture is normal
1. Ensure that the volume is turned down to the least.
2. Check whether the TV set works in mute mode.
There is no picture or sound
1. Ensure that the power cord has a good connection.
2. Ensure that the power switch is on.
3. The contrast and the brightness are adjusted properly.
Picture is black and white or colourless
1. Adjust the colour setup.
2. Check whether the broadcast system selection is correct.
Picture is blurred or there is snowflake or noise
1. Adjust direction and position of the right antenna.
2. The feedback cord of antenna is damaged or broken.
Sound and picture are interfered
1. Check whether the TV set is very near to other electrical appliance. If so, remove it.
Picture is not stable and rolling in PC mode
1. Check whether the display frequencies and bandwidth of computer or video source are fit for TV.
2. Check the display setup of control panel in computer. If the setup is incorrect, change it by
computer programming tools.
Screen displays to check signal cords
1. Check whether the signal cords are connected to PC or video source.
2. Check whether PC or video source is in work.
Remote control is insensitive or does not work
1. Check the batteries of the remote control and make sure that they are powerful
and well conductive.
2. Direct the remote control to the IR sensor of the TV.
3. Check whether there are some obstacles between the remote control and IR sensor.
-39-
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Input: AC 110 - 240V, 50Hz/60Hz
Output: DC 12V / 4A
Power Supply
Standby: <3W
Max: 50W
Power Consumption
Horizontal: 30 - 80KHz
Vertical: 50 - 75Hz
Frequency
NTSC / PAL/SECAM
Colour System
Sync.: H/V Separate, TTL, P. or N.
Video Signal: 0.7Vp-p, 75ohm
VGA
Audio in: RCA JACK (MR) , 0.5Vrms (-9dB)
Audio
Frequency Response: 80Hz-15KHz (at -3dB)
Earphone out: Max. 10mW Output (3.5 Stereo Jack, 32 )
Environmental
Considerations
Operating Temperature: 5V -400C
Operating Humidity: 10%-80% Relative Humidity
Display Colour: 16.2M colours
Resolution: 1280 x 768 pixel
Pixel Pitch: 0.2895mm (H) x 0.2895mm (V)
View angle: 80/80/70/80 (L / R / T / B)
Contrast: 450:1
Specification of
Monitor
Brightness: 500 cd/m2
Response Time: 16 ms
Unit Dimension: 301mm x 546mm x 57.7mm
Screen Dimension: 370 (H) x 222 (V) mm
Size
Gross Weight: 8.8kg
Net Weight: 5.9kg
Weight
S-Video cord x 1 /Adapter x 1 /Power cord x 1 /VGA cord x 1 / User's manual x 1
Remote control x 1 /Battery x 2 / Wall Mounting Bracket x 1
Accessories
Specifications are subject to change without notice.
Weight and dimensions are approximate.
-40-
Download from Www.Somanuals.com. All Manuals Search And Download.
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
FKV2.037.880SSE
Download from Www.Somanuals.com. All Manuals Search And Download.
|