Return
to Menu
T24 Key Indicator Module
(KIM) Installation Card
The T24 Key Indicator Module (KIM) is an add-on device which provides 24 extra memory or
line buttons for the T7316E telephone. Up to nine KIMs can be connected to a T7316E
telephone.
A Station Auxiliary Power Supply (SAPS) is required for T7316E telephones that have five to
nine KIMs attached. For SAPS installation instructions, refer to the SAPS Installation Card
provided with the SAPS kit.
Single T24 KIM installation
Multiple T24 KIM installation
Position the metal hooks
from the left side of the KIM
next to the slots on the right
side of the T7316E
Position the T7316E
telephone and KIMs
together. Align the
1
1
hooks on each KIM
telephone.
to the slots on the
next KIM.
Firmly press the T7316E and KIM together.
Firmly press the T7316E and KIMs together.
Slide the KIM down until its
aligned with the T7316E
telephone.
Slide the KIMs down
until they are aligned
with the T7316E
telephone.
2
3
4
2
3
4
Remove the stand
from the T7316E
telephone.
Remove the
stands from
KIMs and
the T7316E
telephone.
Press here
to remove stand.
Press here
to remove
stands.
Connect the KIM
Connect each KIM
cord to the connector
port on the next KIM
in a daisy-chain
order.
cord to the accessory
connector port on the
T7316E telephone.
KIM 1
KIM 3 KIM 2
Cord to
T7316E
Replace the stand on the T7316E telephone to
complete the installation.
Connect the cord
on the first KIM
to the accessory
connector port on
the T7316E
5
5
6
telephone.
KIM 1
Replace the stands on the KIMs and the
T7316E telephone to complete the installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
|