Nortel Networks Digital Camera COOLPIXS570BK User Manual

DIGITAL CAMERA  
User’s Manual  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Your Safety  
To prevent damage to your Nikon product or injury to yourself or to others, read  
the following safety precautions in their entirety before using this equipment.  
Keep these safety instructions where all those who use the product will read them.  
The consequences that could result from failure to observe the precautions listed  
in this section are indicated by the following symbol:  
This icon marks warnings, information that should be read before using this Nikon  
product, to prevent possible injury.  
WARNINGS  
Turn off in the event of  
malfunction  
Do not use the camera or AC  
adapter in the presence of  
flammable gas  
Should you notice smoke or an unusual  
smell coming from the camera or AC  
adapter, unplug the AC adapter and  
remove the battery immediately, taking  
care to avoid burns. Continued  
operation could result in injury. After  
removing or disconnecting the power  
source, take the equipment to a Nikon-  
authorized service representative for  
inspection.  
Do not use electronic equipment in the  
presence of flammable gas, as this  
could result in explosion or fire.  
Handle the camera strap with  
care  
Never place the strap around the neck  
of an infant or child.  
Keep out of reach of children  
Particular care should be taken to  
prevent infants from putting the  
battery or other small parts into their  
mouths.  
Do not disassemble  
Touching the internal parts of the  
camera or AC adapter could result in  
injury. Repairs should be performed  
only by qualified technicians. Should  
the camera or AC adapter break open  
as the result of a fall or other accident,  
take the product to a Nikon-authorized  
service representative for inspection,  
after unplugging the product and/or  
removing the battery.  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
For Your Safety  
Observe the following  
precautions when handling the  
battery charger  
Observe caution when  
handling the battery  
The battery may leak or explode if  
improperly handled. Observe the  
following precautions when handling  
the battery for use in this product:  
Keep dry. Failure to observe this  
precaution could result in fire or  
electric shock.  
Dust on or near the metal parts of the  
plug should be removed with a dry  
cloth. Continued use could result in  
fire.  
Do not handle the power cable or go  
near the battery charger during  
lightning storms. Failure to observe  
this precaution could result in  
electric shock.  
Do not damage, modify, forcibly tug  
or bend the power cable, place it  
under heavy objects, or expose it to  
heat or flames. Should the insulation  
be damaged and the wires become  
exposed, take it to a Nikon-  
authorized service representative for  
inspection. Failure to observe these  
precautions could result in fire or  
electric shock.  
Do not handle the plug or battery  
charger with wet hands. Failure to  
observe this precaution could result  
in electric shock.  
Do not use with travel converters or  
adapters designed to convert from  
one voltage to another or with DC-  
to-AC inverters. Failure to observe  
this precaution could damage the  
product or cause overheating or fire.  
Before replacing the battery, turn the  
product off. If you are using the AC  
adapter, be sure it is unplugged.  
Only use a Rechargeable Li-ion  
Battery EN-EL10 (supplied). Charge  
the battery by inserting it in a Battery  
Charger MH-63 (supplied).  
When inserting the battery, do not  
attempt to insert it upside down or  
backwards.  
Do not short or disassemble the  
battery or attempt to remove or  
break the battery insulation or casing.  
Do not expose the battery to flame  
or to excessive heat.  
Do not immerse in or expose to  
water.  
Return the battery to the battery case  
for transportation. Do not transport  
or store with metal objects such as  
necklaces or hairpins.  
The battery is prone to leakage when  
fully discharged. To avoid damage to  
the product, be sure to remove the  
battery when no charge remains.  
Discontinue use immediately should  
you notice any change in the battery,  
such as discoloration or deformation.  
If liquid from the damaged battery  
comes in contact with clothing or  
skin, rinse immediately with plenty of  
water.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
For Your Safety  
Use appropriate cables  
When connecting cables to the input  
and output jacks, use only the cables  
provided or sold by Nikon for the  
purpose, to maintain compliance with  
product regulations.  
Avoid contact with liquid  
crystal  
Should the monitor break, care should  
be taken to avoid injury caused by  
broken glass and to prevent liquid  
crystal from the monitor touching the  
skin or entering the eyes or mouth.  
Handle moving parts with care  
Be careful that your fingers or other  
objects are not pinched by the lens  
cover or other moving parts.  
Turn the power off when using  
inside an airplane or the  
hospital  
Turn the power off while inside the  
airplane during take off or landing.  
Follow the instructions of the hospital  
when using while in a hospital. The  
electromagnetic waves given out by  
this camera may disrupt the electronic  
systems of the airplane or the  
CD-ROMs  
The CD-ROMs supplied with this device  
should not be played back on audio CD  
equipment. Playing CD-ROMs on an  
audio CD player could cause hearing  
loss or damage the equipment.  
instruments of the hospital.  
Observe caution when using  
the flash  
Using the flash close to your subject’s  
eyes could cause temporary visual  
impairment. Particular care should be  
observed if photographing infants,  
when the flash should be no less than  
one meter (3 ft. 4 in.) from the subject.  
Do not operate the flash with  
the flash window touching a  
person or object  
Failure to observe this precaution could  
result in burns or fire.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notices  
Notice for Customers in the U.S.A.  
Federal Communications  
Commission (FCC) Radio Frequency  
Interference Statement  
This equipment has been tested and  
found to comply with the limits for a  
Class B digital device, pursuant to Part  
15 of the FCC rules. These limits are  
designed to provide reasonable  
CAUTIONS  
Modifications  
The FCC requires the user to be notified  
protection against harmful interference that any changes or modifications  
in a residential installation. This  
made to this device that are not  
expressly approved by Nikon  
Corporation may void the user’s  
authority to operate the equipment.  
equipment generates, uses, and can  
radiate radio frequency energy and, if  
not installed and used in accordance  
with the instructions, may cause  
harmful interference to radio  
communications. However, there is no  
guarantee that interference will not  
occur in a particular installation. If this  
equipment does cause harmful  
interference to radio or television  
reception, which can be determined by  
turning the equipment off and on, the  
user is encouraged to try to correct the  
interference by one or more of the  
following measures:  
Reorient or relocate the receiving  
antenna.  
Increase the separation between the  
equipment and receiver.  
Connect the equipment into an  
outlet on a circuit different from that  
to which the receiver is connected.  
Consult the dealer or an experienced  
radio/television technician for help.  
Interface Cables  
Use the interface cables sold or  
provided by Nikon for your equipment.  
Using other interface cables may  
exceed the limits of Class B Part 15 of  
the FCC rules.  
Notice for customers in the State of  
California  
WARNING  
Handling the cord on this product will  
expose you to lead, a chemical known  
to the State of California to cause birth  
defects or other reproductive harm.  
Wash hands after handling.  
Nikon Inc.,  
1300 Walt Whitman Road  
Melville, New York 11747-3064  
USA  
Tel: 631-547-4200  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Notices  
Notice for customers in Canada  
CAUTION  
This Class B digital apparatus complies  
with Canadian ICES-003.  
ATTENTION  
Cet appareil numérique de la classe B  
est conforme à la norme NMB-003 du  
Canada.  
Notice for customers in Europe  
This symbol indicates that this  
product is to be collected  
separately.  
The following apply only to  
users in European countries:  
This product is designated for  
separate collection at an appropriate  
collection point. Do not dispose of as  
household waste.  
For more information, contact the  
retailer or the local authorities in  
charge of waste management.  
This symbol on the battery  
indicates that the battery is to  
be collected separately. The  
following apply only to users  
in European countries:  
All batteries, whether marked with  
this symbol or not, are designated for  
separate collection at an appropriate  
collection point. Do not dispose of as  
household waste.  
For more information, contact the  
retailer or the local authorities in  
charge of waste management.  
vi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
viii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
ix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
x
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
About This Manual  
Thank you for your purchase of a Nikon COOLPIX S570 digital camera. This manual  
was written to help you enjoy taking pictures with your Nikon digital camera. Read  
this manual thoroughly before use, and keep it where all those who use the  
product will read it.  
Symbols and Conventions  
To make it easier to find the information you need, the following symbols and  
conventions are used:  
This icon marks cautions,  
This icon marks tips, additional  
information that should be read  
information that may be helpful  
B
C
D
before use, to prevent damage to  
the camera.  
when using the camera.  
This icon indicates that more  
information is available elsewhere  
in this manual or in the Quick Start  
Guide.  
This icon marks notes, information  
that should be read before using  
the camera.  
A
Notations  
A Secure Digital (SD) memory card is referred to as a “memory card”.  
The setting at the time of purchase is referred to as the “default setting”.  
The names of menu items displayed in the camera monitor, and the names of  
buttons or messages displayed in the computer monitor appear in bold.  
Screen Samples  
In this manual, images are sometimes omitted from monitor display samples so  
that monitor indicators can be more clearly shown.  
Illustrations and Screen Display  
Illustrations and text displays shown in this manual may differ from actual display.  
C Internal Memory and Memory Cards  
Pictures taken with this camera can be stored in the camera’s internal memory or on removable  
memory cards. If a memory card is inserted, all new pictures will be stored on the memory card and  
delete, playback and format operations will apply only to the pictures on the memory card. The  
memory card must be removed before the internal memory can be formatted or used to store  
pictures to, or delete, or view pictures.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Information and Precautions  
Life-Long Learning  
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education,  
continually updated information is available online at the following sites:  
For users in the U.S.A.: http://www.nikonusa.com/  
For users in Europe and Africa: http://www.europe-nikon.com/support/  
For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/  
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently  
asked questions (FAQs), and general advice on digital imaging and photography. Additional  
information may be available from the Nikon representative in your area. See the URL below for  
contact information:  
http://imaging.nikon.com/  
Use Only Nikon Brand Electronic Accessories  
Nikon COOLPIX cameras are designed to the highest standards and include complex electronic  
circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries and AC  
adapters) certified by Nikon specifically for use with this Nikon digital camera are engineered and  
proven to operate within the operational and safety requirements of this electronic circuitry.  
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY  
VOID YOUR NIKON WARRANTY.  
The use of third-party rechargeable Li-ion batteries not bearing the  
Nikon holographic seal could interfere with normal operation of the  
camera or result in the batteries overheating, igniting, rupturing, or  
Holographic seal:  
leaking.  
Identifies this device as an  
authentic Nikon product.  
For more information about Nikon brand accessories, contact a local  
authorized Nikon dealer.  
Before Taking Important Pictures  
Before taking pictures on important occasions (such as at weddings or before taking the camera on  
a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable  
for damages or lost profits that may result from product malfunction.  
About the Manuals  
No part of the manuals included with this product may be reproduced, transmitted, transcribed,  
stored in a retrieval system, or translated into any language in any form, by any means, without  
Nikon’s prior written permission.  
Nikon reserves the right to change the specifications of the hardware and software described in  
these manuals at any time and without prior notice.  
Nikon will not be held liable for any damages resulting from the use of this product.  
While every effort was made to ensure that the information in these manuals is accurate and  
complete, we would appreciate it were you to bring any errors or omissions to the attention of the  
Nikon representative in your area (address provided separately).  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Information and Precautions  
Notice Concerning Prohibition of Copying or Reproduction  
Note that simply being in possession of material that was digitally copied or reproduced by means  
of a scanner, digital camera or other device may be punishable by law.  
Items prohibited by law from being copied or reproduced  
Do not copy or reproduce paper money, coins, securities, government bonds or local government  
bonds, even if such copies or reproductions are stamped “Sample”. The copying or reproduction  
of paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless  
the prior permission of the government was obtained, the copying or reproduction of unused  
postage stamps or post cards issued by the government is prohibited. The copying or  
reproduction of stamps issued by the government and of certified documents stipulated by law is  
prohibited.  
Cautions on certain copies and reproductions  
The government has issued cautions on copies or reproductions of securities issued by private  
companies (shares, bills, checks, gift certificates, etc.), commuter passes or coupon tickets, except  
when a minimum of necessary copies are to be provided for business use by a company. Also, do  
not copy or reproduce passports issued by the government, licenses issued by public agencies  
and private groups, ID cards and tickets, such as passes and meal coupons.  
Comply with copyright notices  
The copying or reproduction of copyrighted creative works such as books, music, paintings,  
woodcut prints, maps, drawings, movies and photographs is governed by national and  
international copyright laws. Do not use this product for the purpose of making illegal copies or to  
infringe copyright laws.  
Disposing of Data Storage Devices  
Please note that deleting images or formatting data storage devices such as memory cards or built-  
in camera memory does not completely erase the original image data. Deleted files can sometimes  
be recovered from discarded storage devices using commercially available software, potentially  
resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s  
responsibility.  
Before discarding a data storage device or transferring ownership to another person, erase all data  
using commercial deletion software, or format the device and then completely refill it with images  
containing no private information (for example, pictures of empty sky). Be sure to also replace any  
pictures selected for the welcome screen (A115). Care should be taken to avoid injury or damage  
to property when physically destroying data storage devices.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts of the Camera  
The Camera Body  
10  
1
2
3
4
5
9
8
7
6
Lens cover closed  
11  
1
2
Shutter-release button..............................24  
5
6
7
8
9
Built-in flash......................................................28  
Lens .........................................................135, 149  
Built-in microphone............................66, 75  
Eyelet for camera strap..............................11  
Cable connector............................79, 81, 85  
Zoom control..................................................23  
f : wide.......................................................23  
g
: tele..........................................................23  
h : thumbnail playback.....................50  
i
j
: playback zoom................................52  
: help........................................................11  
10 Pin cover.............................................79, 81, 85  
Power switch/Power-on lamp  
.......................................................................20, 124  
3
4
11 Lens cover ......................................................133  
Self-timer lamp...............................................30  
AF-assist illuminator.................................123  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                 
Parts of the Camera  
1
2
3
4
5
6
7
8
9
10  
11  
12 13  
14 15  
1
2
3
Flash lamp ........................................................ 29  
Speaker........................................................67, 78  
A (shooting mode) button..................... 8  
10 Tripod socket  
Battery-chamber/  
memory card slot cover................... 14, 18  
11  
Power connector cover  
4 c(playback) button........................... 8, 26  
Multi selector..................................................... 9  
12 (for connection to optional AC  
5
adapter)........................................................... 131  
6 k(apply selection) button...................... 9  
7 l(delete) button.................26, 27, 67, 78  
8 dbutton ........ 10, 33, 76, 93, 106, 113  
13 Battery chamber ........................................... 14  
14 Memory card slot......................................... 18  
15 Battery latch............................................. 14, 15  
9
Monitor.................................................................. 6  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
                             
Parts of the Camera  
The Monitor  
The following indicators may appear in the monitor during shooting and playback  
(actual display varies with current camera settings).  
The indicators that appear in the monitor during shooting and playback disappear  
after a few seconds (A119).  
Shooting  
2
6
4
5
28  
3
2
27  
26  
1
7
9
8
25  
10 11  
24  
12  
21  
13  
1/125 F2.7  
999  
1600  
23 22  
17  
19  
15  
20  
14  
a
999  
9999  
18  
16  
1m00s  
1m00s  
b
*
1
2
3
4
5
6
7
8
9
Shooting mode ....................20, 33, 47, 75  
Macro mode....................................................31  
Zoom indicator...................................... 23, 31  
AE/AF-L indicator .........................................46  
Focus indicator..............................................24  
Flash mode.......................................................28  
Battery level indicator................................20  
Motion detection icon................... 21, 122  
Electronic VR icon ..................................... 121  
15 Internal memory indicator......................21  
16 Smile timer........................................................49  
17 Aperture.............................................................24  
18 Skin softening.................................................48  
19 Shutter speed .................................................24  
20 ISO sensitivity..........................................29, 99  
21 Exposure compensation value ............32  
22 Focus area.............................................. 24, 101  
23 Focus area (Face Priority).............. 24, 101  
24 Color options ...............................................100  
25 White balance mode..................................96  
26 Continuous shooting mode..................98  
27 Self-timer indicator......................................30  
28 Blink proof icon..............................................49  
10 “Date not set” indicator ...............116, 137  
11 Travel destination indicator................ 116  
12 Date imprint ................................................. 120  
Image mode....................................................94  
Movie options ................................................76  
13  
a Number of exposures remaining  
14 (still pictures)...............................................20  
b Movie length ..............................................75  
* Differs according to the current shooting mode.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Parts of the Camera  
Playback  
4
1
2
3
5
6
19  
18  
16  
15  
17  
14  
7
8
13  
12  
999  
10  
9
999  
99999999 99999999  
a
11  
11mm0000ss  
11mm0000ss  
b
1
2
3
Date of recording.........................................16  
Time of recording.........................................16  
Volume indicator.................................. 66, 78  
Category icon in  
9
Internal memory indicator......................26  
10 Favorite pictures guide.............................61  
11 Movie playback guide...............................78  
12 List by date guide.........................................53  
13 Print set icon....................................................90  
14 Small picture icon ........................................73  
15 D-Lighting icon..............................................71  
16 Quick retouch icon......................................70  
17 Skin softening icon......................................72  
18 Voice memo icon .........................................67  
19 File number and type .............................132  
1
auto sort mode ............................................56  
4
Favorites folder icon in  
1
favorite pictures mode ...........................62  
5
6
Battery level indicator................................20  
Protect icon................................................... 109  
2
Image mode ..................................................94  
7
2
Movie options ..............................................76  
a Current frame number/  
total number of frames........................26  
b Movie length ..............................................78  
8
1
2
The icon for the selected category in auto sort mode or the favorites folder currently  
selected in playback mode is displayed.  
Differs according to the settings configured during shooting.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operations  
The A (Shooting Mode) Button  
Press the A button in playback mode to enter  
shooting mode.  
Press the A button in shooting mode to display  
the “shooting-mode selection” menu and change  
the shooting mode.  
The Shooting-mode Selection Menu  
Use the multi selector (A9) to select the following shooting modes.  
1. A (auto) mode (A20)  
2. x Scene mode (A33)*  
3. F Smart portrait mode (A47)  
4. D Movie mode (A75)  
Auto mode  
1
2
3
4
* The icon displayed differs depending upon the last  
mode selected.  
While the shooting-mode selection menu is displayed, press the A button to  
continue shooting without changing the shooting mode.  
The c(Playback) Button  
Press the cbutton in shooting mode to enter  
playback mode.  
Press the cbutton in playback mode to display  
the “playback-mode selection menu” and change  
the playback mode.  
If the camera is turned off, hold down the c  
button to turn the camera on in playback mode.  
The Playback-mode Selection Menu  
Use the multi selector (A9) to select the following playback modes.  
1. cPlayback mode (A26)  
2. h Favorite pictures mode (A59)  
3. F Auto sort mode (A56)  
4. C List by date mode (A53)  
Play  
1
2
3
4
While the playback-mode selection menu is displayed, press the cbutton to  
return to playback mode without changing the playback mode.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Basic Operations  
The Multi Selector  
This section describes standard uses of the multi selector to select modes, select  
menu options and to apply selection.  
Shooting  
Display m(flash mode) (A28) menu or move cursor up  
Display o(exposure  
compensation) (A32)  
guide  
Display n(self-timer)  
Flash mode  
Apply selection  
Display p(macro mode) (A31) menu or move cursor down  
Playback  
15/11/20009 15:30  
0004.JPG  
Select previous  
picture  
4
4
Select next picture  
Menu Display  
Move cursor up  
Move cursor right or go  
to next screen (apply  
selection)  
Beach/snow  
Move cursor left  
or return to  
previous screen  
Shooting menu  
Apply selection (go to  
next screen)  
Move cursor down  
Image mode  
White balance  
Continuous  
ISO sensitivity  
Color options  
Exit  
C Note on the Multi Selector  
In this manual, H, I, Jand Kare used in some cases to indicate up, down, left and right  
operations of the multi selector.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Operations  
The dButton  
Press the dbutton to display the menu for the  
current mode.  
Use the multi selector to navigate the menus (  
Select a tab on the left side of the monitor to  
display the corresponding menu.  
Press the dbutton again to exit the menu.  
Displayed when the menu  
contains two or more pages  
Shooting menu  
Image mode  
White balance  
Continuous  
ISO sensitivity  
Color options  
• Top tab: Display the available menus  
in the current mode  
• Bottom tab: Display the setup menu  
Exit  
Displayed when there are one  
or more menu items to follow  
AF area mode  
Shooting menu  
Displayed when there  
AF area mode  
Face priority  
Auto  
are more previous  
menu items  
Manual  
Center  
Exit  
Exit  
Select an item, then press the k  
Press the kbutton or the  
button or the multi selector Kto multi selector Kto apply  
proceed to the next set of options. selection.  
Switching Between Tabs  
Shooting menu  
Shooting menu  
Set up  
Menus  
Welcome screen  
Date  
Image mode  
White balance  
Continuous  
Image mode  
White balance  
Continuous  
Monitor settings  
Date imprint  
Exit  
ISO sensitivity  
Color options  
ISO sensitivity  
Color options  
Exit  
Exit  
Press the multi selector  
J to highlight the tab.  
Press the multi selector Hor  
Ito select the tab, and press  
either the kbutton or K.  
The selected menu is  
displayed.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Basic Operations  
Help Displays  
Rotate the zoom control to g(j) when M/L is displayed at the lower right of  
the menu screen to view a description of the currently selected menu option.  
To return to the original menu, rotate the zoom control to g(j) again.  
White balance  
For accurate color reproduction,  
choose a setting that matches  
the light source.  
Back  
Exit  
Shutter-release Button  
The camera features a two-stage shutter-release button. To set focus and  
exposure, press the shutter-release button halfway, stopping when you feel  
resistance. Focus and exposure lock while the shutter-release button is held in this  
position. To release the shutter and take a picture, press the shutter-release button  
the rest of the way down. Do not use force when pressing the shutter-release  
button, as this may result in camera shake and blurred pictures.  
Press the  
Press the  
shutter-release  
button halfway  
to set focus and  
exposure  
shutter-release  
button the rest  
of the way down  
to take picture  
Attaching the Camera Strap  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
First Steps  
Charging the Battery  
Charge the Rechargeable Li-ion Battery EN-EL10 (supplied) with the Battery  
Charger MH-63 (supplied).  
1
Connect the power cable in the following order: 1, 2.  
The CHARGE lamp will light (3).  
2
3
1
2
Insert the battery at an angle  
as shown (1), and set it in the  
battery charger (2).  
1
2
The CHARGE lamp starts blinking  
when charging starts (3).  
About 100 minutes are required to  
charge a fully depleted battery.  
3
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Charging the Battery  
The following chart explains CHARGE lamp status.  
CHARGE lamp Description  
Blinks  
Battery charging.  
On  
Battery fully charged.  
The battery is not inserted correctly. Remove the battery and  
reinsert it into the battery charger so that the battery is lying  
flat.  
Operating temperature range exceeded. Charge the battery  
indoors with an ambient temperature of 5 °C to 35 °C (41 °F to  
95 °F) before use.  
The battery is faulty. Stop charging immediately, unplug the  
charger, and take both the battery and charger to your retailer  
or Nikon service representative.  
Flickers  
3
Remove the battery and unplug the charger when charging is  
complete.  
B Notes on the Battery Charger  
The supplied battery charger is for use only with the Rechargeable Li-ion Battery EN-EL10. Be sure  
to use only genuine Nikon brand rechargeable batteries.  
Be sure to read and follow the warnings for the battery charger on pages iii before using the  
battery charger.  
B Notes on the Battery  
Be sure to read and follow the warnings for the battery on page iii and the section, “The Battery”  
(A134), before using the battery.  
If the battery is not used for an extended period, recharge it at least once every six months and run  
it flat before returning it to storage.  
C AC Power Supply  
To power the camera continuously for extended periods, use an AC Adapter EH-62D (available  
separately from Nikon) (A131). Do not, under any circumstances, use another make or model of  
AC adapter. Failure to observe this precaution could result in overheating or in damage to the  
camera.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting the Battery  
Insert a Rechargeable Li-ion Battery EN-EL10 (supplied) into your camera.  
Charge the battery before the first use or when the battery is running low  
1
2
Open the battery-chamber/memory card slot  
cover.  
Slide the cover latch toward Y (1) and open the  
battery-chamber/memory card slot cover (2).  
Inserting the Battery.  
Confirm that the positive (+) and negative (–) terminals  
are oriented correctly as described on the label at the  
entrance of the battery chamber, and insert the  
battery.  
Use the battery to push the orange battery latch in the  
direction indicated by the arrow (1) and fully insert  
the battery (2). When the battery is fully inserted, the  
battery latch will lock it in place.  
B Inserting the Battery  
Inserting the battery upside down or backwards could  
damage the camera. Be sure to check the battery is in the  
correct orientation.  
3
Close the battery-chamber/memory card slot  
cover.  
Close the battery-chamber/memory card slot cover  
(1), and slide the cover latch to the Z position (2).  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Inserting the Battery  
Removing the Battery  
Turn the camera off and make sure that the power-on  
lamp and the monitor have gone out before opening  
the battery-chamber/memory card slot cover.  
To eject the battery, open the battery-chamber/  
memory card slot cover and slide the orange battery  
latch in the direction indicated by the arrow (1). The  
battery can then be removed by hand (2).  
Note that the battery may become hot during use;  
observe due caution when removing the battery.  
Turning On and Off the Camera  
Press the power switch to turn on the camera. The  
power-on lamp (green) will light for a moment and  
then the monitor will turn on. To turn off the camera,  
press the power switch again.  
When the camera is turned off, both the power-on  
lamp and monitor will turn off.  
If the camera is turned off, hold down the cbutton to turn the camera on in  
playback mode.  
C Auto Power Off in Shooting Mode (Standby Mode)  
If no operations are performed for about a minute (default setting), the monitor will turn off  
automatically and the camera will enter standby mode. If no operations are performed for another  
three minutes, the camera will turn off automatically (the auto off function).  
If the monitor is off in standby mode (the power-on lamp is blinking), press the power switch or  
the shutter-release button to reactivate it.  
The time allowed to elapse from before the camera enters standby mode can be changed from  
the Auto off option (A124) in the setup menu (A112).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
         
Setting Display Language, Date and Time  
A language-selection dialog is displayed the first time the camera is turned on.  
1
2
Press the power switch to turn on the camera.  
The power-on lamp (green) will light for a moment and  
the monitor will turn on.  
Use the multi selector to choose  
the desired language and press the  
kbutton.  
For information on using the multi  
selector, see “The Multi Selector” (A9).  
3
4
Choose Yes and press the kbutton.  
Date  
If No is selected, the date and time will not be set.  
Set time and date?  
No  
Yes  
Cancel  
Press the multi selector Jor Kto select your  
home time zone (A118) and press the k  
button.  
London  
Casablanca  
Back  
D Daylight Saving Time  
If daylight saving time is in effect, press the multi selector Hin the  
time zone selection screen displayed in step 4 to turn on the  
daylight saving time option.  
London  
Casablanca  
When the daylight saving time option is enabled, W is displayed at  
the top of the monitor. To turn off the daylight saving time option,  
press I.  
Back  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setting Display Language, Date and Time  
5
6
Edit the date and time.  
Date  
Press Hor I to edit the highlighted item.  
D
M
Y
Press Kto move the highlight in the following order:  
D (day) M (month) Y (year) hour minute ➝  
DMY (the order in which the day, month, and year are  
displayed)  
0 1  
0 1  
2 0 0 9  
0 0  
0 0  
Edit  
Press Jto return to the previous item.  
Choose the order in which the day, month and  
year are displayed and press the kbutton or  
press K.  
Date  
D
M
Y
1 5  
1 1  
2 0 0 9  
The settings are applied and monitor display exits to  
shooting mode.  
1 5  
1 0  
Edit  
D Changing the Date and Time  
Select Date from the Date item (A116) in the setup menu (A112) to change the current date  
and time and follow the procedure described in step 5 above.  
Select Time zone from the Date item in the setup menu to change the time zone and daylight  
saving time settings (A116).  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Inserting Memory Cards  
Image, sound, and movie files are stored in the camera’s internal memory  
(approximately 47 MB) or on removable Secure Digital (SD) memory cards  
(available separately) (A131).  
If a memory card is inserted in the camera, data are automatically stored on  
the memory card and data recorded to the memory card can be played back,  
deleted or transferred. Remove the memory card to store data in the internal  
memory, or play back, delete or transfer data from the internal memory.  
1
Confirm that the power-on lamp and the  
monitor are off and open the battery-  
chamber/memory card slot cover.  
Be sure to turn off the camera before opening the  
battery-chamber/memory card slot cover.  
2
Insert the memory card.  
Insert the memory card in the correct  
orientation (as shown on the right) until it clicks  
into place.  
Close the battery-chamber/memory card slot  
cover.  
B Inserting Memory Cards  
Inserting the memory card upside down or backwards  
could damage the camera or the memory card. Be sure to  
check the memory card is in the correct orientation.  
Removing Memory Cards  
Before removing memory cards, turn the camera off  
and confirm that the power-on lamp and monitor are  
off. Open the battery-chamber/memory card slot cover  
and press the card in (1) to partially eject the card. The  
card can then be removed by hand. Do not attempt to  
remove the card at an angle (2).  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Inserting Memory Cards  
B Formatting Memory Cards  
If the message at right is displayed, the memory card must be  
formatted before use (A125). Note that formatting  
permanently deletes all pictures and other data on the  
memory card. Be sure to make copies of any pictures you wish to  
keep before formatting the memory card.  
Card is not formatted.  
Format card?  
No  
Yes  
To format the memory card, use the multi selector to choose Yes  
and press the kbutton. The confirmation dialog will be displayed.  
To start formatting, choose Format and press the kbutton.  
Do not turn the camera off or open the battery-chamber/memory card slot cover until formatting  
is complete.  
The first time you insert the memory cards used in other devices into the COOLPIX S570, be sure to  
format them using this camera (A125).  
B The Write Protect Switch  
Memory cards are equipped with a write protect switch. When  
this switch is in the “lock” position, data cannot be written to,  
or deleted from, the memory card. If the switch is in the “lock”  
position, unlock it by sliding the switch to the “write” position  
to record or delete pictures, or to format the memory card.  
Write protect switch  
B Memory Cards  
Use only Secure Digital memory cards.  
Do not perform the following during formatting, while data is being written to or deleted from the  
memory card, or during data transfer to a computer. Failure to observe this precaution could result  
in the loss of data or in damage to the camera or memory card:  
- Take out the battery or memory card  
- Turn off the camera  
- Disconnect the AC adapter  
Do not format the memory card using a computer.  
Do not disassemble or modify.  
Do not drop, bend, or expose to water or strong physical shocks.  
Do not touch the metal terminals with your fingers or metal objects.  
Do not affix labels or stickers to the memory card.  
Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.  
Do not expose to humidity, dust, or to corrosive gases.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Photography and Playback: Auto Mode  
Step 1 Turn the Camera On and Select  
A
(Auto) Mode  
This section describes how to take pictures in A (auto) mode, an automatic,  
“point-and-shoot” mode recommended for first-time users of digital cameras.  
1
2
Press the power switch to turn on the camera.  
The power-on lamp (green) will light for a moment and  
the monitor will turn on. The lens will also extend.  
Proceed to step 4 if A is displayed.  
Press the A button to display the  
shooting-mode selection menu.  
3
4
Press the multi selector Hor Ito choose A  
and press the kbutton.  
Auto mode  
The camera enters A (auto) mode.  
Check the battery level and the number of  
exposures remaining.  
Battery level indicator  
Battery Level  
Monitor  
Description  
NO INDICATOR  
Battery fully charged.  
Battery low. Prepare to charge or  
replace the battery.  
11  
B
Number of exposures  
remaining  
N
Cannot take pictures. Recharge or  
replace with a fully charged  
battery.  
Battery  
exhausted.  
Number of Exposures Remaining  
The number of pictures that can be stored depends on the capacity of the internal  
memory or memory card and image mode setting (A95).  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
Step 1 Turn the Camera On and Select A (Auto) Mode  
Indicators Displayed in A (Auto) Mode  
Shooting mode  
A displayed in A  
(auto) mode.  
Motion detection icon  
The effects of the subject  
movement and camera shake  
are reduced.  
11  
Internal memory indicator  
Image mode  
Indicates that images will be stored on the  
The combination of image  
size and image quality  
(compression) is displayed.  
The default setting is L  
Normal (4000×3000).  
camera’s internal memory (approximately 47 MB).  
When a memory card is inserted in the camera,  
C does not appear and images will be stored on  
the memory card.  
The indicators and photo info displayed during shooting and playback will turn off  
after a few seconds (A119). When the monitor has turned off in standby mode  
to save power, press the power switch or the shutter-release button to reactivate it  
D Functions Available in A (Auto) Mode  
In A (auto) mode, macro mode (A31) and exposure compensation (A32) can be applied and  
pictures can be taken using the flash mode (A28) and self-timer (A30). Pressing the dbutton  
in A (auto) mode allows you to specify settings for all shooting menu items (A93) depending  
upon the shooting situations.  
D Motion Detection  
See Motion detection (A122) in the setup menu (A112) for more information.  
D Electronic Vibration Reduction  
When the flash mode (A28) is set to W (off) or Y (slow sync) with Electronic VR (A121) in the  
setup menu set to Auto, the R icon may appear in the monitor. The appearance of R indicates  
shooting conditions in which the effects of camera shake can be pronounced. In these situations,  
the camera reduces the effects of camera shake in pictures before recording them.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Step 2 Frame a Picture  
1
Ready the camera.  
Hold the camera steadily in both hands, keeping your  
fingers and other objects away from the lens, flash, AF-  
assist illuminator, microphone, and speaker.  
When taking pictures in “tall” orientation, turn the  
camera so that the built-in flash is above the lens.  
2
Frame the picture.  
When the camera detects a face, that face will be  
framed by a yellow double border (default setting).  
Up to 12 faces can be detected. When the camera  
detects more than one face, the face closest to the  
camera is framed by a double border AF area, and faces  
outside the AF area are framed by single borders.  
11  
AF area will not appear when shooting pictures of subjects other than people, or  
framing a subject with which no face is recognized. Position the main subject near the  
center of the monitor.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Step 2 Frame a Picture  
Zoom out Zoom in  
Using the Zoom  
Use the zoom control to activate optical zoom. Rotate  
the zoom control to gto zoom in so that the subject  
fills a larger area of the frame, or fto zoom out, thus  
increasing the area visible in the frame.  
A zoom indicator is displayed at the top of the monitor  
when the zoom control is rotated.  
Optical Digital  
zoom  
zoom  
Digital Zoom  
When the camera is zoomed in to the maximum optical zoom position, rotating  
and holding the zoom control at gtriggers digital zoom. The subject is magnified  
up to 4× the maximum optical zoom ratio.  
Focus will be on the center of the screen (without active focus area display) when  
digital zoom is in effect.  
Maximum optical zoom  
Digital zoom is  
in effect.  
C Digital Zoom and Interpolation  
Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify  
images, resulting in slight deterioration of picture quality.  
Interpolation is applied at zoom positions beyond V. When zoom is increased beyond the V  
position, interpolation is initiated and the zoom indicator turns yellow to indicate that interpolation  
is being applied. The position of V moves to the right as image size decreases, allowing for  
confirmation of the zoom positions at which shooting without interpolation is possible at the  
current image mode setting.  
When an image size is small  
Digital zoom can be disabled from the Digital zoom option (A123) in the setup menu  
(A112).  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Step 3 Focus and Shoot  
1
Press the shutter-release button halfway.  
The camera focuses when the shutter-release button is  
pressed halfway (A11).  
When the subject is in focus, the active focus area  
glows green.  
When a face is detected:  
1/125 F2.7  
Shutter speed Aperture  
When a face is not detected:  
The camera automatically selects the focus area (one of  
nine) containing the subject closest to the camera.  
When the subject is in focus, the active focus area  
glows green.  
1/125 F2.7  
Shutter speed Aperture  
When digital zoom is used, the focus area is not  
displayed and the camera focuses at the center of the frame. Once focus has been  
acquired, the focus indicator (A6) will glow green.  
When you press the shutter-release button halfway, the shutter speed and aperture  
values also appear.  
Focus and exposure remain locked while the shutter-release button is pressed  
halfway.  
If the focus area or focus indicator blinks red when the shutter-release button is  
pressed halfway, the camera will be unable to focus. Change the composition and  
press the shutter-release button halfway again.  
2
Press the shutter-release button the rest of  
the way down.  
The shutter is released and the picture will be recorded  
to the memory card or internal memory.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Step 3 Focus and Shoot  
B During Recording  
While pictures are being recorded, the number of exposures remaining will blink. Do not open the  
battery-chamber/memory card slot cover while pictures are being recorded. Cutting power or  
removing the memory card in these circumstances could result in loss of data or in damage to the  
camera or card.  
B Autofocus  
Autofocus may not perform as expected in the following situations. In some rare cases, the subject  
may not be in focus despite the fact that the active focus area and the focus indicator glow green:  
Subject is very dark  
Objects of sharply differing brightness are included in the scene (e.g. the sun is behind the subject  
and is in deep shadow)  
No contrast between the subject and surroundings (e.g. when the subject is standing in front of a  
white wall, wearing a white shirt)  
Several objects are at different distances from the camera (e.g. the subject is inside a cage)  
Subject is moving rapidly  
In the situations noted above, try pressing the shutter-release button halfway to refocus several  
times, or focus on another subject and use focus lock (A102). When using focus lock, be sure that  
the distance between the camera and the subject with which focus was locked is the same as that  
for the actual subject.  
B Face Priority  
See “AF Area Mode” (A101) or “Face Priority” (A103) for more information about Face Priority.  
D AF-assist Illuminator and Flash  
If the subject is poorly lit, the AF-assist illuminator (A123) may light when the shutter-release  
button is pressed halfway, or the flash (A28) may fire when the shutter-release button is pressed  
all the way down.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Step 4 Playing Back and Deleting Pictures  
Playing Back Pictures (Playback Mode)  
Press the c(Playback) button.  
A (shooting mode) button  
The last picture taken will be displayed in full-  
frame playback mode.  
Press the multi selector H, I, Jor Kto view  
additional pictures. Press and hold H, I, J  
or Kto fast forward.  
Pictures may be displayed briefly at low  
resolution while being read from the memory  
card or internal memory.  
multi selector c(Playback)  
button  
Press the A button or the shutter-release  
button to switch to shooting mode.  
When playing back pictures stored on the cameras internal  
memory, C appears. When a memory card is inserted in  
the camera, C does not appear and images stored on the  
memory card are played back.  
15/11/20009 15:30  
0004.JPG  
4
4
Internal memory  
indicator  
Deleting Pictures  
1
Press the lbutton to delete the  
picture currently displayed in the  
monitor.  
2
Use the multi selector to select Yes and press  
the kbutton.  
Erase 1 image?  
Deleted pictures cannot be recovered.  
To exit without deleting the picture, choose No and  
press the kbutton.  
No  
Yes  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Step 4 Playing Back and Deleting Pictures  
C Options Available in Playback Mode  
The following options are available in full-frame playback mode.  
Option  
Use  
Description  
A
Rotate the zoom control to gto enlarge  
the picture up to 10×.  
Press the kbutton to return to full-frame  
playback mode.  
Playback zoom  
g(i)  
Rotate the zoom control to fto display  
4, 9 or 16 picture thumbnails or to apply  
the calendar display.  
Add the picture currently displayed to  
favorite pictures.  
View thumbnails/apply  
calendar display  
f(h)  
Add favorite pictures  
k
Press the cbutton to display the  
playback-mode selection menu and  
change to list by date, auto sort, or  
favorite pictures mode.  
53, 56,  
Change playback mode  
c
A
Press the A button or the shutter-release  
button.  
Switch to shooting mode  
C Pressing the cButton to Turn On the Camera  
When the camera is off, holding down the cbutton will turn the camera on in playback mode. The  
lens will not extend.  
C Viewing Pictures  
Pictures stored in the internal memory can only be viewed if no memory card is inserted.  
Pictures that were shot using Face Priority (A103) will be rotated automatically when displayed  
in full-frame playback mode according to the orientation of the face (excluding pictures that were  
shot using Continuous, BSS, and Multi-shot 16 (A98)).  
When the monitor has turned off in standby mode to save power, press the cbutton or the  
power switch to reactivate it (A124).  
C Deleting the Last Picture Taken While in Shooting Mode  
In shooting mode, press the lbutton to delete the last picture  
taken.  
Erase 1 image?  
No  
Yes  
D Deleting Multiple Pictures  
Multiple pictures can be deleted from the Delete option (A109) in the playback menu (A106),  
the list by date menu (A55), the auto sort menu (A58), or the favorite pictures menu (A64).  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Flash  
The flash has a range of 0.5-5.5 m (1 ft. 8 in.-18 ft.) when the camera is zoomed out all  
the way. With maximum optical zoom applied, the range is 0.5-2.2 m (1 ft. 8 in.-7 ft.  
3 in.) (when ISO sensitivity is set to Auto). The following flash modes are available.  
U
V
W
Auto  
Flash fires automatically when lighting is poor.  
Auto with red-eye reduction  
Reduce “red-eye” in portraits (A29).  
Off  
Flash will not fire even when lighting is poor.  
Fill flash  
X
Flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows and  
backlit subjects.  
Y
Slow sync  
U (auto) is combined with slow shutter speed.  
Flash illuminates main subject; slow shutter speeds are used to capture  
background at night or under dim light.  
Setting the Flash Mode  
1
Press m(flash mode).  
The flash menu is displayed.  
2
Use the multi selector Hor Ito choose the  
desired mode and press the kbutton.  
The icon for the selected flash mode is displayed at the  
top of the monitor.  
When U (auto) is applied, D is only displayed for  
a few seconds, regardless of Photo info settings  
Flash mode  
If a setting is not applied by pressing the kbutton  
within a few seconds, the selection will be cancelled.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Using the Flash  
B Shooting When Lighting is Poor and the Flash is Disabled (W)  
Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of  
camera shake.  
The E indicator is displayed when the camera automatically increases sensitivity. Pictures taken  
when E is displayed may be slightly mottled.  
B Note on Using the Flash  
Reflections from dust particles in the air may appear as bright spots in pictures. To reduce these  
reflections, set the flash to W (off).  
C The Flash Lamp  
The flash lamp indicates the flash status when the  
shutter-release button is pressed halfway down.  
On: Flash will fire when picture is taken.  
Blinks: Flash charging. Wait a few seconds and try  
again.  
Off: Flash will not fire when picture is taken.  
If the battery is low, the monitor display will turn off, and remain off, until the flash is fully charged.  
C The Flash Setting  
The default flash mode setting varies with shooting mode.  
A (auto): U (auto)  
Scene: varies with the selected scene mode (A34-40)  
F (smart portrait): fixed at W (off) when On is selected for Blink proof, U (auto) when Off is  
selected for Blink proof (A49)  
Flash cannot be used simultaneously with certain features (A105).  
The flash mode setting applied in A (auto) mode is stored in the camera’s memory even after the  
camera is turned off, and reapplied the next time A (auto) mode is selected.  
C Red-eye Reduction  
This camera uses advanced red-eye reduction (“In-Camera Red-Eye Fix”).  
Pre-flashes are fired repeatedly at low intensity before the main flash, reducing the red-eye effect.  
If the camera detects “red-eye” when a picture is taken, Nikon’s own In-Camera Red-Eye Fix  
processes the image before it is recorded.  
Note the following when taking pictures:  
Because pre-flashes are fired, there is a slight lag between when the shutter-release button is  
pressed and when the picture is shot. This mode is not recommended when a quick shutter  
response is required.  
The time required to save the picture increases slightly.  
Advanced red-eye reduction may not produce the desired results in some situations.  
In extremely rare instances, areas not subject to red-eye may be affected by advanced red-eye  
reduction processing; in these cases, choose another mode and try again.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Taking Pictures with the Self-timer  
The camera is equipped with a ten-second and two-second timer for self-portraits.  
This feature is useful for reducing the effects of camera shake that occurs when  
pressing the shutter-release button. When using the self-timer, use of a tripod is  
recommended.  
1
Press n(self-timer).  
The self-timer menu is displayed.  
2
Use the multi selector Hor Ito choose 10 s  
or 2 s and press the kbutton.  
10 s (ten seconds): Suited for important occasions  
(such as weddings)  
2 s (two seconds): Suited for preventing camera  
shake  
Self-timer  
The mode selected for self-timer is displayed.  
If a setting is not applied by pressing the kbutton within a few seconds, the  
selection will be cancelled.  
3
4
Frame the picture and press the  
shutter-release button halfway.  
Focus and exposure will be set.  
1/125 F2.7  
Press the shutter-release button the  
rest of the way down.  
The self-timer starts, and the number of  
seconds remaining before the shutter is  
released is displayed in the monitor. The self-  
timer lamp blinks while the timer is counting  
down. About one second before the shutter  
is released, the lamp remains lit and stops  
blinking.  
1/125 F2.7  
When the shutter is released, the self-timer  
will be set to k.  
To stop the timer before a picture is taken,  
press the shutter-release button again.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Macro Mode  
Macro mode is used for taking pictures of objects as close as 3 cm (1.2 in.). Note  
that the flash may be unable to light the entire subject at distances of less than  
50 cm (1 ft. 8 in.).  
1
Press p(macro mode).  
The macro menu is displayed.  
2
Use the multi selector Hor Ito choose ON  
and press the kbutton.  
The macro mode icon (F) is displayed.  
If a setting is not applied by pressing the kbutton  
within a few seconds, the selection will be cancelled.  
Macro mode  
3
Rotate the zoom control to frame the picture.  
The closest distance at which the camera can focus  
varies depending on the zoom position. At the zoom  
position (wide angle position before the G icon)  
where the F icon and zoom display glow green, the  
camera can focus on subjects as close as 4 cm (1.6 in.)  
from the lens. At the wide-most zoom position, the camera can focus on subjects as  
close as 3 cm (1.2 in.) from the lens.  
C Autofocus  
When using macro mode, the camera focuses continuously until focus is locked by pressing the  
shutter-release button halfway. A sound will be heard while the camera focuses.  
C The Macro Mode Setting  
The macro mode setting applied in A (auto) mode is stored in the camera’s memory even after the  
camera is turned off, and reapplied the next time A (auto) mode is selected.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Exposure Compensation  
Exposure compensation is used to alter exposure from the value suggested by the  
camera to make pictures brighter or darker.  
1
Press o(exposure compensation).  
The exposure compensation guide is displayed.  
2
Use the multi selector Hor Ito choose the  
desired setting and press the kbutton.  
When the picture is too dark: adjust the exposure  
compensation to “+” side.  
When the picture is too bright: adjust the exposure  
compensation to “–” side.  
Exposure compensation can be set to values between  
-2.0 and +2.0 EV.  
If a setting is not applied by pressing the kbutton within a few seconds, the  
selection will be cancelled.  
When set to any value other than 0.0, the value is displayed with the H icon in the  
monitor.  
Exposure compensation  
3
Press the shutter-release button to take the  
picture.  
To turn off exposure compensation, repeat from step 1  
and set the value to 0.0, then press k.  
11  
C Exposure Compensation Value  
The exposure compensation value applied in A (auto) mode is stored in the camera’s memory even  
after the camera is turned off, and reapplied the next time A (auto) mode is selected.  
D Using Exposure Compensation  
The camera tends to reduce exposure when the frame is dominated by brightly lit objects and to  
increase exposure when the frame is mostly dark. Positive compensation may therefore be  
required to capture the brilliancy of very bright objects that fill the frame (for example, sunlit  
expanses of water, sand, or snow) or when the background is much brighter than the main  
subject.  
Negative compensation may be called for when large areas of the frame contain very dark objects  
(for example, a swath of dark green leaves) or when the background is much darker than the main  
subject.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Shooting Suited for the Scene  
Shooting in Scene Mode  
Camera settings are automatically optimized for the selected subject type. The  
following scene modes are available.  
x
Scene auto selector b Portrait  
c Landscape  
d
Sports  
i Dusk/dawn  
m Fireworks show n Copy  
e Night portrait  
f Party/indoor g Beach/snow h Sunset  
j
Night landscape  
k Close-up  
u
Food  
l Museum  
o Backlight  
p
Panorama assist  
Choosing a Scene Mode  
1
Press the A button in shooting  
mode to display the shooting-mode  
selection menu, then press the  
multi selector Hor Ito select a  
scene icon.  
Scene auto selector  
The icon for the last scene mode selected  
is displayed. The default setting is x  
(Scene auto selector).  
2
3
Press the multi selector Kand press H, I, J,  
or Kto choose the desired scene, and then  
press the kbutton.  
The screen changes to the shooting mode screen.  
Beach/snow  
Frame the subject and shoot.  
1/125 F2.7  
D Image Mode  
When the dbutton is pressed to display the C (scene) menu, Image mode (A94) can be  
adjusted. Change made to this setting applies to all shooting modes (except for movie mode).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
             
Shooting in Scene Mode  
Features  
The following icons are used for descriptions in this section: X = flash mode  
(A28), n= self-timer (A30), p= macro mode (A31), o= exposure  
compensation (A32).  
x Scene auto selector  
Q
By simply framing a picture, the camera automatically selects the optimum scene mode.  
for more information.  
1
2
3
2
m
U
n
Off  
p
Off  
o
0.0  
1
The camera automatically selects the optimum flash mode setting for the scene mode it  
has selected. Can be changed to W (off).  
Other settings can be selected.  
2
3
Changed to On when the camera selects Close-up scene mode.  
b Portrait  
Use this mode for taking portraits in which the main subject  
stands out clearly.  
If the camera detects a face, it focuses on the face. See “Face  
Priority” (A103) for more information.  
If more than one face is recognized, focus will be on the face  
nearest to the camera.  
The skin softening feature can make the subject’s (up to  
three people) skin appear smoother, then record the image  
If no faces are recognized, focus will be on the center of the  
screen.  
Digital zoom is not available.  
m
V*  
n
Off*  
p
Off  
o
0.0*  
* Other settings can be selected.  
c Landscape  
Use this mode for vivid landscapes and cityscapes.  
The camera focuses at infinity. The focus area or focus  
indicator (A6) always glows green when the shutter-  
release button is pressed halfway. Note, however, that  
objects in the foreground may not always be in focus.  
AF-assist illuminator (A123) does not light.  
m
W
n
Off*  
p
Off  
o
0.0*  
* Other settings can be selected.  
Q: Indicates pictures shot in this scene mode are processed automatically to reduce noise, and  
therefore may take more time to save.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
                 
Shooting in Scene Mode  
d Sports  
Use this mode for dynamic action shots that freeze the action  
in a single shot and record motion in a series of pictures.  
The camera focuses on the subject in the center of the  
frame. The camera focuses continuously until focus is  
locked by pressing the shutter-release button halfway.  
While the shutter-release button is held down, the camera  
shoots up to 5 pictures at a rate of up to about 0.9 frames per second (fps) (when image  
mode is set to I Normal (4000)).  
Focus, exposure compensation, and white balance are fixed at the values determined  
with the first shot in each series.  
AF-assist illuminator (A123) does not light.  
The maximum frame rate with continuous shooting may vary depending upon the  
current image mode setting and the memory card used.  
m
W
n
Off  
p
Off  
o
0.0*  
* Other settings can be selected.  
e Night portrait  
OQ  
Use this mode for portraits of a human subject shot in front of  
background lighting at night. Flash is used to illuminate the  
subject while maintaining the mood of the background.  
If the camera detects a face, it focuses on the face. See “Face  
Priority” (A103) for more information.  
If more than one face is recognized, focus will be on the face  
nearest to the camera.  
The skin softening feature can make the subject’s (up to three  
people) skin appear smoother, then record the image  
If no faces are recognized, focus will be on the center of the  
screen.  
Digital zoom is not available.  
1
2
2
m
V
n
Off  
p
Off  
o
0.0  
1
2
Fill flash with slow sync and red-eye reduction.  
Other settings can be selected.  
O: For those scene modes with O, use of a tripod is recommended.  
Q: Indicates pictures shot in this scene mode are processed automatically to reduce noise, and  
therefore may take more time to save.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
     
Shooting in Scene Mode  
f Party/indoor  
Suitable for taking pictures in parties. Captures the effects of  
candlelight and other indoor background lighting.  
The camera focuses on the subject in the center of the  
frame.  
As pictures are easily affected by camera shake, hold the  
camera steadily. Use of a tripod is recommended for dark  
locations.  
1
2
2
m
V
n
Off  
p
Off  
o
0.0  
1
2
The flash may change to slow sync with red-eye reduction. Other settings can be selected.  
Other settings can be selected.  
g Beach/snow  
Captures the brightness of such subjects as snowfields,  
beaches, or sunlit expanses of water.  
The camera focuses on the subject in the center of the  
frame.  
m
U*  
n
Off*  
p
Off*  
o
0.0*  
* Other settings can be selected.  
h Sunset  
O
Preserves the deep hues seen in sunsets and sunrises.  
The camera focuses on the subject in the center of the  
frame.  
m
W*  
n
Off*  
p
Off  
o
0.0*  
* Other settings can be selected.  
O: For those scene modes with O, use of a tripod is recommended.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Shooting in Scene Mode  
i Dusk/dawn  
OQ  
Preserves the colors seen in the weak natural light before  
sunrise or after sunset.  
The camera focuses at infinity. The focus area or focus  
indicator (A6) always glows green when the shutter-  
release button is pressed halfway. Note, however, that  
objects in the foreground may not always be in focus.  
AF-assist illuminator (A123) does not light.  
m
W
n
Off*  
p
Off  
o
0.0*  
* Other settings can be selected.  
j Night landscape  
OQ  
Slow shutter speeds are used to produce stunning night  
landscapes.  
The camera focuses at infinity. The focus area or focus  
indicator (A6) always glows green when the shutter-  
release button is pressed halfway. Note, however, that  
objects in the foreground may not always be in focus.  
AF-assist illuminator (A123) does not light.  
m
W
n
Off*  
p
Off  
o
0.0*  
* Other settings can be selected.  
O: For those scene modes with O, use of a tripod is recommended.  
Q: Indicates pictures shot in this scene mode are processed automatically to reduce noise, and  
therefore may take more time to save.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Shooting in Scene Mode  
k Close-up  
Use to photograph flowers, insects and other small objects at  
close range.  
Macro mode (A31) will be turned on and the camera  
automatically zooms to the position at the closest distance  
at which the camera can focus.  
The closest distance at which the camera can focus varies  
depending on the zoom position. At the zoom position (wide angle position before the  
K icon) where the F icon and zoom display glows green, the camera can focus on  
subjects as close as 4 cm (1.6 in.) from the lens. At the wide-most zoom position, the  
camera can focus on subjects as close as 3 cm (1.2 in.) from the lens.  
AF area mode is set to Manual (A101). Press the kbutton to choose the focus area  
in which focus is acquired.  
The camera focuses continuously until focus is locked by pressing the shutter-release  
button halfway.  
m
W
n
Off*  
p
On  
o
0.0*  
* Other settings can be selected. Note that the flash may be unable to light entire subject at  
distances of less than 50 cm (1 ft. 8 in.).  
u Food  
Use this mode when taking pictures of food. See “Taking  
AF area mode is set to Manual (A101). Press the k  
button to choose the focus area in which focus is acquired.  
X
W
n
Off*  
p
On  
o
0.0*  
* Other settings can be selected.  
l Museum  
Use indoors where flash photography is prohibited (for  
example, in museums and art galleries) or in other settings in  
which you do not want to use the flash.  
The camera focuses on the subject in the center of the  
frame.  
BSS (best shot selector) is used when shooting (A98).  
AF-assist illuminator (A123) does not light.  
Pictures are easily affected by camera shake; hold the  
camera steadily.  
m
W
n
Off*  
p
Off*  
o
0.0*  
* Other settings can be selected.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Shooting in Scene Mode  
m Fireworks show  
O
Slow shutter speeds are used to capture the expanding burst  
of light from fireworks.  
The camera focuses at infinity. The focus indicator (A6)  
always glows green when the shutter-release button is  
pressed halfway. Note, however, that objects in the  
foreground may not always be in focus.  
AF-assist illuminator (A123) does not light.  
m
W
n
Off  
p
Off  
o
0.0  
n Copy  
Provides clear pictures of text or drawings on a white board or  
in print.  
The camera focuses on the subject in the center of the  
frame.  
Use macro mode (A31) to focus at short ranges.  
Colored text and drawings may not show up well.  
m
W*  
n
Off*  
p
Off*  
o
0.0*  
* Other settings can be selected.  
o Backlight  
Use when light is coming from behind the subject, throwing  
features or details in shadow. The flash fires automatically to  
“fill in” (illuminate) shadows.  
The camera focuses on the subject in the center of the  
frame.  
m
m
n
Off*  
p
Off  
o
0.0*  
* Other settings can be selected.  
O: For those scene modes with O, use of a tripod is recommended.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
       
Shooting in Scene Mode  
p Panorama assist  
Use to take a series of pictures that will later be joined to form a single panorama using the  
supplied Panorama Maker software. See “Taking Pictures for a Panorama” (A45) for details.  
m
W*  
n
Off*  
p
Off*  
o
0.0*  
* Other settings can be selected.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shooting in Scene Mode  
Shooting in the Scene Mode Selected by the Camera  
(Scene Auto Selector)  
By simply framing a picture, the camera automatically selects the optimum scene  
mode for simpler shooting.  
When the camera is aimed at a subject in x scene auto selector mode, the  
camera automatically selects one of the following scene modes.  
Auto (typical photography)  
Landscape (A34)  
Night landscape (A37)  
Backlight (A39)  
Portrait (A34)  
Night portrait (A35)  
Close-up (A38)  
1
Press the A button in shooting  
mode to display the shooting-mode  
selection menu and use the multi  
selector to select x (Scene auto  
selector) (A33).  
Scene auto selector  
The camera enters scene auto selector  
scene mode.  
2
Frame the subject and take the picture.  
When the camera automatically selects a scene mode,  
the shooting mode icon changes to that for the scene  
mode currently enabled.  
d: Auto  
g: Night landscape  
i: Close-up  
e: Portrait  
11  
f: Landscape  
h: Night portrait  
j: Backlight  
Press the shutter-release button halfway to set focus and exposure. When the subject  
is in focus, the active focus area glows green.  
Press the shutter-release button the rest of the way down to take the picture.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Shooting in Scene Mode  
B Note on Scene Auto Selector Scene Mode  
Depending upon shooting conditions, the camera may not select the desired scene mode. Should  
this occur, switch to A (auto) mode (A20) or choose the desired scene mode manually (A33).  
C Focusing When Using Scene Auto Selector Mode  
When using scene auto selector mode, if the camera detects a face, it focuses on the face (Face  
Priority A103).  
When the shooting mode icon is d or i (Close-up), just as when AF area mode (A101) is  
set to Auto, the camera automatically selects the focus area (one of nine) containing the subject  
closest to the camera.  
C Flash Mode in Scene Auto Selector Scene Mode  
U (Auto) (default setting) and W (Off) flash mode settings can be applied (A28).  
When U (Auto) is applied, the camera automatically selects the optimum flash mode setting  
for the scene mode it has selected.  
When W (Off) is applied, the flash does not fire, regardless of shooting conditions.  
C Functions Restricted in Scene Auto Selector Scene Mode  
Digital zoom is not available.  
The macro mode button on the multi selector (A9, 31) is disabled.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting in Scene Mode  
Taking Pictures in Food Mode  
Use this mode when taking pictures of food.  
1
Press the A button in shooting  
mode to display the shooting-mode  
selection menu and use the multi  
selector to select u (Food) (A33).  
Macro mode (A31) will be turned on  
and the camera automatically zooms to  
the position at the closest distance at  
which the camera can focus.  
Food  
2
3
Press the multi selector Hor Ito choose  
white balance.  
Press Hto increase the amount of red, or Ito increase  
the amount of blue.  
11  
11  
Frame the picture.  
The closest distance at which the camera can focus  
varies depending on the zoom position. At the zoom  
position (wide angle position before the G icon)  
where the F icon and zoom display glow green, the  
camera can focus on subjects as close as 4 cm (1.6 in.)  
from the lens. At the wide-most zoom position, the  
camera can focus on subjects as close as 3 cm (1.2 in.)  
from the lens.  
AF area mode is set to Manual (A101). Press the k  
button to move the focus area. Press the multi selector  
H, I, J, or Kto select a focus area and press the k  
button again to activate the selected focus area.  
(A32) settings can be adjusted while the focus area is  
locked.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Shooting in Scene Mode  
4
Press the shutter-release button to  
take the picture.  
Focus is locked when the shutter-release  
button is pressed halfway, and a picture is  
taken when the shutter-release button is  
pressed the rest of the way down.  
1/125 F2.7  
When the camera is unable to focus, the  
focus area blinks red. Change the composition and press the shutter-release button  
halfway again.  
B Note on Food Mode  
Flash mode is disabled. Macro mode setting (A31) is fixed at ON.  
C White Balance Setting in Food Mode  
Increasing the amount of red or blue will decrease illumination effects.  
Changing white balance in food mode will not affect white balance in the shooting menu (A96).  
The white balance setting applied in food mode is stored in the camera’s memory even after the  
camera is turned off, and reapplied the next time food mode is selected.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting in Scene Mode  
Taking Pictures for a Panorama  
The camera focuses on the subject in the center of the frame. Use a tripod for the  
best results.  
1
Press the A button in shooting  
mode to display the shooting-mode  
selection menu and use the multi  
selector to select p (Panorama  
assist) (A33).  
Panorama assist  
Panorama direction icons (I) are displayed  
to show the direction in which pictures  
will be joined.  
2
Use the multi selector to choose the direction  
and press the kbutton.  
Select how pictures will be joined together in the  
completed panorama; right (I), left (J), up (K) or  
down (L).  
The yellow panorama direction icon (I I) will move to  
the direction pressed and press the kbutton to  
11  
choose the direction. A white panorama direction icon (I) will be displayed in the  
chosen direction.  
Apply flash mode (A28), self-timer (A30), macro mode (A31) and exposure  
compensation (A32) settings with this step, if necessary.  
Press the kbutton again to reselect the direction.  
3
4
Take the first picture.  
One third of the last picture taken will be  
displayed partially transparent.  
11  
10  
Take the next picture.  
Compose the next picture so that one-third  
of the frame overlaps the previous picture.  
Repeat until you have taken the necessary  
number of pictures to complete the scene.  
End  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Shooting in Scene Mode  
5
Press the kbutton when shooting is  
complete.  
The camera returns to step 2.  
End  
7
B Panorama Assist  
Set flash mode, self-timer, macro mode and exposure compensation before taking the first picture.  
They cannot be changed after the first picture is taken. Pictures cannot be deleted, nor can zoom  
or Image mode setting (A94) be adjusted after the first picture is taken.  
Shooting for the panorama series is terminated if the auto off function (A124) initiates standby  
mode during shooting. Setting the time allowed to elapse before the auto off function is enabled  
to a longer setting is recommended.  
D R Indicator  
When using panorama assist mode, all pictures in the panorama have  
the same exposure, white balance, and focus as the first picture of the  
panorama. When the first picture is shot, R is displayed to  
indicate that exposure, white balance, and focus are locked.  
End  
10  
D Panorama Maker  
Install Panorama Maker from the supplied Software Suite CD. Transfer pictures to a computer  
(A80) and use Panorama Maker (A83) to join them in a single panorama.  
D More Information  
See “File and Folder Names” (A132) for more information.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Taking Pictures of Smiling Faces (Smart Portrait Mode)  
Using Smart Portrait Mode  
At the default setting, the camera detects smiling faces using face priority and  
releases the shutter automatically (smile timer function). The skin softening  
function makes the subject's skin appear smoother.  
1
Enter smart portrait mode by  
pressing the A button in shooting  
mode and selecting F (press the  
multi selector Hor I), and then  
pressing the kbutton.  
Smart portrait  
Smart portrait mode is selected.  
2
Frame a picture.  
Point the camera at the subject.  
When the camera detects a face, the focus area  
containing the face will be displayed with a yellow  
double border, and when focus is locked the double  
border will turn green for a moment.  
1/250 F2.7  
Up to three faces can be detected. When the camera  
detects more than one face, the face closest to the center of the frame is framed by a  
double border and the others by single borders.  
3
4
The shutter is automatically released.  
If the camera detects that the face framed by the double border is smiling, the Smile  
timer function (A48) automatically releases the shutter.  
The self-timer lamp (A4) blinks when the camera detects a face, and it flickers  
immediately after the shutter is released. Each time the shutter is released, the camera  
repeats automatic shooting by face priority and smile detection.  
The shutter can also be released by pressing the shutter-release button. If no face is  
detected, the camera focuses on the subject in center of frame.  
When the shutter is released, the camera makes the subject’s skin appear smoother,  
then records the image (Skin softening (A48)).  
Finish shooting.  
To finish automatic shooting of smiling faces, either turn the camera off, set Smile  
timer to Off, or press the A button and select another shooting mode.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Using Smart Portrait Mode  
B Face Priority and Smiling Face Detection Features  
Under some shooting conditions, faces and smiling faces may not be detected properly.  
See “Notes on Face priority” (A104) for more information.  
C Auto Power Off When Using Smile Timer (Standby Mode)  
When Smile timer is set to On, the auto off function (A124) will turn the camera off in the  
following situations if no operations are performed.  
The camera does not recognize any faces  
The camera recognized the face but cannot detect a smiling face  
C Functions Available in Smart Portrait Mode  
Flash cannot be used when Blink proof is set to On. When Blink proof is set to Off, flash mode  
(A28) changes to U (auto) (other settings can be selected).  
Exposure compensation (A32) can be adjusted.  
If Smile timer and Blink proof are both set to Off, self-timer (A30) can be set.  
Macro mode cannot be used.  
Digital zoom is not available.  
Press the dbutton to display the F (smart portrait) menu and change the settings for Image  
mode, Skin softening, Smile timer, or Blink proof.  
D More Information  
See “Autofocus” (A25) for more information.  
Smart portrait menu  
The smart portrait menu contains the following options.  
Press the dbutton in smart portrait mode to display the smart portrait menu  
and use the multi selector to modify and apply settings.  
Image mode  
Allows you to set Image mode (A94).  
Changes made to the image mode setting apply to all shooting modes (except  
movie mode).  
Skin softening  
Set skin softening. When the shutter is released, the camera detects up to 3 faces  
and processes the image to make the faces appear smoother, then records the  
image. The effect of this feature can be set to High, Normal (default setting), and  
Low. When Off is selected, skin softening is turned off.  
When skin softening is enabled, the icon for the current setting is displayed in the  
monitor during shooting (A6). When Off is selected, an icon for the current  
setting is not displayed. Additionally, the effects of the current skin softening  
setting cannot be previewed in the monitor while shooting. To confirm, view the  
pictures after shooting.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Using Smart Portrait Mode  
Smile timer  
On (default setting): Among the detected faces, if a smile is detected in the face  
that is framed by a double border, the camera automatically releases the shutter.  
Off: The camera does not release the shutter automatically using smile timer; the  
shutter is only released when the shutter-release button is pressed.  
When smile timer is enabled, the current setting is displayed during shooting  
(A6). When Off is selected, an icon for the current setting is not displayed.  
Blink proof  
When set to On, the shutter is released two times each time a picture is taken; the  
camera chooses one image in which the subjects’ eyes are open, and saves it.  
The message on the right will be displayed for a  
few seconds when the camera records an image in  
which someone may have been blinking.  
When set to On, the flash cannot be used.  
The default setting is Off.  
When blink proof is enabled, the current setting is  
displayed during shooting (A6). When Off is  
selected, an icon for the current setting is not  
displayed.  
A blink was detected in the  
picture just taken.  
B Notes on Skin Softening  
When taking pictures with skin softening, the time required to save the pictures increases slightly.  
Depending on shooting conditions, even if the camera detects a face on the monitor at the time  
of shooting, effects of the skin softening function may not be visible, and areas other than the face  
may be processed. If the desired effect is not achieved, set Skin softening to Off and shoot again.  
The amount of skin softening effect that is applied cannot be set while using the portrait or night  
portrait scene modes.  
Skin softening can also be applied to pictures after they have been taken (A72).  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
More on Playback/In-Camera Editing  
Viewing Multiple Pictures: Thumbnail Playback  
Rotate the zoom control to f(h) in full-frame  
playback mode (A26) to display pictures in “contact  
sheets” of thumbnail images.  
1/ 10  
The following operations are available while thumbnails are displayed.  
To  
Use  
Description  
A
Choose pictures  
Press the multi selector H  
,
I
,
J
, or K.  
9
Rotate the zoom control to f(h) to increase  
the number of picture thumbnails displayed: 4  
9 16. Rotate the zoom control to f (h)  
in the 16-picture thumbnail display to apply the  
calendar display (A51), and pictures can be  
found by the date on which they were taken.  
Rotate the zoom control to g(i) to return to  
thumbnail display.  
Increase the  
number of  
pictures  
displayed/apply  
the calendar  
display  
f(h)  
Decrease the  
number of  
pictures  
Rotate the zoom control to g(i) to decrease  
the number of picture thumbnails displayed: 16  
9 4. Rotate to g(i) in 4-picture thumbnail  
display to return to full-frame playback mode.  
g(i)  
displayed  
Cancel thumbnail  
playback  
k
Press the kbutton.  
A
Switch to  
shooting mode  
Press the A button or the shutter-release  
button.  
C Thumbnail Playback Mode Display  
Protect icon  
When pictures for which Print set (A90) and  
Protect (A109) settings have been configured  
are selected, the icons in the illustration to the  
right appear.  
Print set icon  
1/ 10  
Movies are displayed as film frames.  
Film frames  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
       
Viewing Multiple Pictures: Thumbnail Playback  
C Thumbnail Display in Auto Sort and Favorite  
Pictures Mode  
1/  
3
When thumbnails are displayed in auto sort mode (A56), the  
category icon of the pictures will appear at the right top of the  
screen.  
When thumbnails are displayed in favorite pictures mode (A59),  
the favorite pictures icon will appear at the right top of the screen.  
Calendar Display  
Rotate the zoom control to f(h) when the pictures  
are displayed in 16-thumbnail (A50) in playback mode  
to switch to calendar display.  
Selecting a date displays the first picture taken on that  
date in full-frame playback mode. The dates on which  
the pictures were taken are underlined in yellow.  
18  
The following operations are available in calendar display.  
To  
Use  
Description  
A
Select a date  
Press the multi selector H  
,
I
,
J
, or K.  
Return to full-  
The first picture taken on the selected date is  
displayed full frame.  
k
frame playback  
Return to  
thumbnail display  
g(i)  
Rotate the zoom control to g(i).  
B Notes on Calendar Display  
Pictures taken before the date and time have been set are recognized as having been taken on 01/  
01/2009 in the calendar display.  
The lbutton and dbutton are not available in calendar display.  
D List by Date Mode  
Only the pictures taken on the same date can be played back in list by date mode (A53). The  
playback menu operations (A55) are also available only for the pictures taken on the selected  
dates.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Taking a Closer Look: Playback Zoom  
Rotating the zoom control to g(i) during full-frame  
playback mode (A26) zooms the current picture, with  
the center of the picture displayed in the monitor.  
The guide at lower right shows which portion of the  
picture is enlarged.  
The following operations are available while pictures  
are zoomed in.  
To  
Zoom in  
Use  
Description  
A
Zoom increases each time the zoom control is  
rotated to g(i), to a maximum of 10×.  
g(i)  
Zoom decreases each time the zoom control is  
rotated to f(h). When the magnification ratio  
reaches 1×, the display returns to full-frame  
playback mode.  
Zoom out  
f(h)  
View other areas  
of picture  
Press the multi selector H, I, J, or Kto move  
the display area to other areas of the picture.  
Switch to full-  
k
Press the kbutton.  
frame playback  
Press the dbutton to crop current picture to  
contain only the portion visible in the monitor.  
Crop picture  
d
A
Switch to  
shooting mode  
Press the A button or the shutter-release  
button.  
Pictures Taken in Face Priority  
When zooming in (playback zoom) on a picture taken  
using the face priority function (A103) by rotating the  
zoom control to g(i), the picture will be enlarged so  
that the face detected at the time of shooting is in the  
center of the monitor (excluding pictures that were shot  
using Continuous, BSS and Multi-shot 16 (A98)).  
If more than one face was detected, the picture will  
be enlarged with the face on which focus was acquired at the center of the  
monitor. Press the multi selector H, I, J, or Kto display other faces that were  
detected.  
When the zoom control is rotated to g(i) or f(h) to adjust the zoom ratio,  
the center of the picture (normal playback zoom display), rather than the face, is  
displayed at the center of the monitor.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Viewing Pictures by Date (List by Date Mode)  
In the C list by date mode, you can playback only the images taken on the same  
date. In full-frame playback mode, just as with the normal playback mode, pictures  
can be viewed as thumbnails, picture displays can be enlarged, pictures can be  
edited, and movies can be played back.  
By pressing the dbutton to display the “List by Date Menu” (A55), you can  
delete all pictures with the same date, view a slide show of pictures with the same  
date, and set print set or protect for all pictures with the same date.  
Selecting a Date in List by Date Mode  
1
Press the cbutton in playback  
mode to display the playback-mode  
selection menu and press the multi  
selector Hor Ito choose C, and  
then press the kbutton.  
List by date  
Dates for which pictures exist will be listed.  
2
Select the desired date.  
List by date  
The camera lists up to 29 dates. If pictures exist for  
more than 29 dates, all pictures recorded earlier than  
most recent 29 dates will be listed together as Others.  
1 5 / 1 1 / 2 0 0 9  
3
2
1 0 / 1 1 / 2 0 0 9  
Others  
4 0  
When the kbutton is pressed, the first picture taken  
on the selected date will be displayed full-frame.  
Select images and press the kbutton to sort the  
displayed images to the favorites folder (A61).  
Rotate the zoom control to f(h) in full-frame  
playback mode to return to the list by date screen.  
15/11/20009 15:30  
0003.JPG  
3
3
B Notes on List by Date Mode  
Up to 9,000 pictures can be displayed in list by date mode. If more pictures exist, “*” is displayed  
next to the number.  
Pictures taken before the date and time have been set are recognized as having been taken on 01/  
01/2009.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Viewing Pictures by Date (List by Date Mode)  
Using List by Date Mode  
The following operations are available in the list by date screen.  
To  
Use  
Description  
A
Select date  
Press the multi selector Hor Ito select a date.  
Press the kbutton to display the first picture  
taken on the selected date.  
Switch to full-  
frame playback  
k
Rotate the zoom control to f(h) in full-frame 26  
playback mode to return to the list by date  
screen.  
Press the lbutton to delete all pictures taken on  
the selected date. Choose Yes on the  
confirmation dialog to be displayed.  
Delete picture  
l
View list by date  
menu  
Press the dbutton to display the list by date  
menu.  
d
Change playback  
mode  
Press the cbutton to display the playback-  
mode selection menu.  
c
A
Switch to  
shooting mode  
Press the A button or the shutter-release button. 26  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing Pictures by Date (List by Date Mode)  
List by Date Menu  
Press the dbutton in list by date mode to perform the following operations on  
the pictures taken on the specified date.  
Quick retouch*  
D-Lighting*  
Skin softening*  
Print set  
Slide show  
Delete  
Protect  
Rotate image*  
Small picture*  
Voice memo*  
* During full-frame playback only  
When the dbutton is pressed in the list by date screen (A53), options can be  
applied to all pictures taken on the same date, or all pictures taken on the same  
date can be deleted. To apply options to individual pictures, or to select individual  
pictures for deletion, display a picture full-frame and press the dbutton.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Image Searching in Auto Sort Mode  
Pictures and movies will automatically be sorted in any of the following folders  
during shooting. If F auto sort mode is selected, pictures and movies can be  
viewed by selecting the folder to which they were sorted with shooting.  
a Smile  
Y Portraits  
u Food  
U Landscape  
D Movie  
V Dusk to dawn  
X Retouched copies  
D Close-ups  
W Other scenes  
In full-frame playback mode, just as with the normal playback mode, thumbnail  
playback mode and calendar playback mode can be displayed, picture displays  
can be enlarged, pictures can be edited, and movies can be played back. Pictures  
can also be sorted into folders. By pressing the dbutton to display the “Auto  
Sort Menu” (A58), you can delete all pictures in the same folder, view a slide  
show of pictures in the same folder, and set print set or protect for all pictures in  
the same folder.  
Displaying Pictures in Auto Sort Mode  
1
Press the cbutton in playback  
mode to display the playback-mode  
selection menu and press the multi  
selector Hor Ito choose F, and  
then press the kbutton.  
Auto sort  
A list of categories appears.  
2
Choose an auto sort category.  
Portraits  
information about auto sort categories.  
Press kto display pictures in the selected folder in  
full-frame playback mode.  
The icon of the category currently played back will be  
displayed in the top right of the screen.  
Select images and press the kbutton to sort the  
15/11/22009 15:30  
0004.JPG  
displayed images to the favorites folder (A61).  
1
4
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Image Searching in Auto Sort Mode  
Description  
Categories and the Contents  
Folder name  
Pictures taken in smart portrait mode (A47) while smile timer  
was set to On.  
a Smile  
Pictures taken in A (auto) mode (A20) using face priority  
Pictures taken in Portrait*, Night portrait*, Party/indoor, and  
Backlight* scene mode (A33).  
Y Portraits  
Pictures taken in smart portrait mode (A47) while smile timer  
was set to Off.  
U Landscape  
Pictures taken in Landscape* scene mode (A33).  
Pictures taken in Night landscape*, Sunset, Dusk/dawn or  
Fireworks show scene mode (A33).  
V Dusk to dawn  
Pictures taken in A (auto) mode using macro (A31).  
Pictures taken in Close-up* scene mode (A33).  
D Close-ups  
u Food  
Pictures taken in Food (A43) scene mode (A33).  
Movies recorded in movie mode (A75).  
Edited pictures (A68).  
D Movie  
X Retouched copies  
W Other scenes  
All pictures that are not included in the other folders.  
* The pictures taken in Scene auto selector scene mode (A41) are included.  
B Notes on Auto Sort Mode  
Up to 999 pictures and movie files can be added to each folder in auto sort mode. If the desired  
folder already contains 999 pictures, new pictures or movies cannot be added or displayed in auto  
sort mode. Display pictures and movies that could not be added to a folder in normal playback  
mode (A26) or list by date mode (A53).  
Pictures or movies copied from the internal memory or the memory card (A110) cannot be  
displayed in auto sort mode.  
Pictures or movies recorded by a camera other than the COOLPIX S570 cannot be displayed in  
auto sort mode.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Image Searching in Auto Sort Mode  
Using Auto Sort Mode  
The following operations are available in the category list screen.  
To  
Use  
Description  
A
Select the folder  
name  
Press the multi selector H, I, J, or Kto  
select the folder.  
Switch to full-frame  
playback  
Press the kbutton to display the first picture  
in the selected folder.  
k
l
Press the lbutton after selecting a category,  
and a confirmation dialogue will be displayed.  
Choose Yes and press the kbutton to delete  
all pictures sorted to that category.  
Delete picture  
Change playback  
mode  
Press the cbutton to display the playback-  
mode selection menu.  
c
A
Switch to shooting  
mode  
Press the A button or the shutter-release  
button.  
Auto Sort Menu  
Press the dbutton in full-frame playback mode or thumbnail display mode of  
auto sort mode to display the following menus.  
Quick retouch  
D-Lighting  
Skin softening  
Print set  
Slide show  
Delete  
Protect  
Rotate image  
Small picture  
Voice memo  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Sorting Favorite Pictures (Favorite Pictures Mode)  
Pictures can be added to the favorites folder sorted by each event such as travel or  
wedding. Once pictures are added to the favorites folder, only pictures in the  
selected folder can be played back. One picture can be added to multiple folders.  
Sorting/Playback Procedure  
Preparing favorites folder (A60)  
Playing back the pictures  
(Play back the desired pictures to add in playback mode (A26),  
list by date mode (A53), or auto sort mode (A56))  
Sorting pictures to favorites folder (A61)  
Viewing the pictures in favorites folder (A62)  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sorting Favorite Pictures (Favorite Pictures Mode)  
Preparing Favorites Folder (setting icons)  
Changing the display icons for favorites folders enables you to see which pictures  
have been added to a favorites folder. The icons can be changed again after  
adding the pictures to the folders.  
1
2
3
4
Press the cbutton in playback  
mode to display the playback-mode  
selection menu and press the multi  
selector Hor Ito choose h, and  
then press the kbutton.  
Favorite pictures  
A list of favorite folders is displayed.  
Choose the favorites folder and  
press the dbutton.  
Favorite pictures  
Icon selection screen is displayed.  
Choose icon  
Use the multi selector Jor Kto choose an  
icon color and press the kbutton.  
Choose icon  
Back  
Use H, I, J, or Kto choose an icon and  
press the kbutton.  
Choose icon  
The icon will be changed and the monitor display will  
return to the list of favorite folders screen.  
Back  
B Icons for Favorites Folder  
Choose icons for favorites folders separately for the internal memory and for every memory card  
used.  
Remove the memory card from the camera to change favorites folder icons for the internal memory.  
When favorite pictures stored to the internal memory, or a memory card, are played back without  
an icon having been selected, icons are displayed as numbers (default setting).  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sorting Favorite Pictures (Favorite Pictures Mode)  
Sorting Pictures to a Favorites Folder  
Pictures can be added to favorites folders and sorted. Adding the pictures enables  
easier and faster searching.  
1
2
Playback the pictures in playback mode (A26), list by date mode  
(A53), or auto sort mode (A56).  
Select your favorite picture and press the k  
button.  
15/11/20009 15:30  
0004.JPG  
Select full-frame playback mode and press the k  
button.  
The favorites folders selection screen is displayed.  
4
4
3
Use the multi selector to choose the favorites  
folder you want to add the picture to and  
press the kbutton.  
Favorite ppictures  
The pictures are added to the selected favorites folder.  
Back  
Add  
B Notes on Adding Favorite Pictures  
A favorites folder can contain up to 200 pictures.  
If the selected picture has been already added to the favorites folder, the checkbox on the  
selected folder will have the On mark (w).  
One picture can be added to multiple favorite folders.  
When pictures are added to a favorites folder, they are not physically copied to a favorites folder  
(A132) or moved from the folder to which they were originally recorded (A65).  
Movies cannot be added to favorites folders.  
D More information  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sorting Favorite Pictures (Favorite Pictures Mode)  
Viewing the Pictures in Favorites Folder  
In  
h
Favorite pictures playback mode, the Favorites folder with the pictures can be  
chosen and displayed. In full-frame playback mode, just as with the normal playback  
mode, thumbnail playback mode and calendar playback mode can be displayed, picture  
displays can be enlarged, pictures can be edited, and movies can be played back. By  
pressing  
the Favorite pictures playback menu (  
on a specified day to view as a slide show, set for printing or protection, etc.  
d
in full-frame playback mode or thumbnail display mode, you can display  
64), from which you can select pictures taken  
1
Press the cbutton in playback  
mode to display the playback-mode  
selection menu, press the multi  
selector Hor Ito choose h, and  
press the kbutton.  
Favorite pictures  
A list of favorites folders is displayed.  
2
Choose a Favorite folder.  
Favorite pictures  
Choose icon  
Press kto display pictures in the selected folder in  
full-frame playback mode.  
The icon of the favorites folder currently played back  
will be displayed on the top right of the screen.  
15/11/20009 15:30  
0004.JPG  
4
4
Removing Pictures from Favorites  
Remove this picture from  
favorites?  
To remove pictures from a favorites folder without  
deleting the pictures, use the procedure below.  
Press the kbutton in the full-frame display in step 2  
above and the removing favorites screen will be displayed.  
Choose Yes and press the kbutton to remove the  
picture. To cancel, choose No.  
No  
Yes  
B Notes on Deleting  
Deleting a picture during favorite pictures playback will delete the original file that has been  
registered to the favorites folder (A65).  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Sorting Favorite Pictures (Favorite Pictures Mode)  
Using Favorite Pictures Mode  
The following operations are available in the favorites folders list screen.  
To  
Use  
Description  
A
Select favorites  
folder  
Press the multi selector H, I, J, or K.  
9
Switch to full-frame  
playback  
Press the kbutton to display the first picture in  
the favorites folder.  
k
l
All pictures that are registered to the selected  
folder are deleted. Choose Yes and press the k  
button to delete all pictures sorted to that  
favorites folder.  
Delete picture  
Change the icon for  
favorites folder  
d
Change the icon for favorites folder.  
Change playback  
mode  
Press the cbutton to display the playback-  
mode selection menu.  
c
A
Switch to shooting  
mode  
Press the A button or the shutter-release  
button.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sorting Favorite Pictures (Favorite Pictures Mode)  
Favorite Pictures Menu  
Press the dbutton in full-frame playback mode or thumbnail display mode in  
favorite picture playback mode to display the following menus.  
Quick retouch  
D-Lighting  
Skin softening  
Print set  
Slide show  
Delete  
Protect  
Rotate image  
Small picture  
Voice memo  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sorting Favorite Pictures (Favorite Pictures Mode)  
C Adding/Viewing Favorite Pictures  
When pictures are added to a favorites folder, they are not physically copied to a favorites folder or  
moved from the folder to which they were originally recorded (A132). Only the file names of  
pictures are added to favorites folders. In favorite pictures mode, pictures with file names that have  
been added to the favorites folder are played back.  
Deleting a picture during favorite pictures playback (A26, 63, 109) will delete the original file that  
has been registered to the favorites folder.  
Adding to Favorites  
Favorites Folder 1  
Internal memory and memory card  
0001.JPG  
0003.JPG  
0002.JPG  
0004.JPG  
0001.JPG  
0002.JPG  
0003.JPG  
Adds a file name  
Favorites Folder 2  
Adds a file name  
0001.JPG  
0004.JPG  
Favorites Picture Playback  
0001.JPG  
0002.JPG  
Favorites Folder 1  
0001.JPG  
Calling a file  
Internal  
memory or  
memory card  
Playback  
0002.JPG  
0003.JPG  
0003.JPG  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Voice Memos: Recording and Playback  
Use the camera’s built-in microphone to record voice memos for pictures.  
Recording Voice Memos  
1
Display the desired picture in full-frame  
playback mode (A26) or thumbnail display  
mode (A50) and press the dbutton.  
The playback menu is displayed.  
2
Use the multi selector to choose E Voice  
Playback menu  
Delete  
memo and press the kbutton.  
Protect  
Rotate image  
The screen for recording voice memos is displayed.  
Small picture  
Voice memo  
Exit  
3
Press and hold the kbutton to record a voice  
memo.  
Recording ends after about 20 seconds or when the k  
button is released.  
Do not touch the built-in microphone during  
recording.  
Back  
20s  
17s  
During recording, o and p blink in the monitor.  
When recording ends, the voice memo playback  
screen is displayed. Follow the instructions in step 3 of  
“Playing Voice Memos” (A67) to play the voice  
memo.  
Press the dbutton before or after recording a voice  
memo to return to full-frame playback mode.  
D More Information  
See “File and Folder Names” (A132) for more information.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Voice Memos: Recording and Playback  
Playing Voice Memos  
Pictures for which voice memos have been recorded are indicated by p in full-  
frame playback mode.  
1
2
3
Display the desired picture in full-  
frame playback mode (A26) or  
thumbnail display mode (A50)  
and press the dbutton.  
15/11/2009 15:30  
0004.JPG  
The playback menu is displayed.  
4/  
4
Use the multi selector to choose E Voice  
memo and press the kbutton.  
Playback menu  
Delete  
Protect  
Rotate image  
Small picture  
Voice memo  
The screen for playing voice memos is displayed.  
Exit  
Press the kbutton to listen to the voice  
memo.  
Playback ends when the voice memo ends or the k  
button is pressed again.  
Use the zoom control gor fto adjust the volume.  
Press the dbutton before or after playing a voice  
memo to return to full-frame playback mode.  
Back  
6s  
Deleting Voice Memos  
Select a picture with a voice memo and press the l  
button. Use the multi selector to choose w and press  
the kbutton. Only the voice memo will be deleted.  
Erase 1 image?  
No  
Yes  
B Voice Memos  
When a picture with a voice memo attached is deleted, both the picture and its voice memo are  
deleted.  
If a voice memo already exists for the current picture, it must be deleted before a new voice memo  
can be recorded.  
The COOLPIX S570 is not able to attach a voice memo to pictures recorded by other cameras.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Editing Pictures  
Use the COOLPIX S570 to edit pictures in-camera and store them as separate files  
(A132). The editing features described below are available.  
Editing function  
Description  
Easily create retouched copies in which contrast and saturation  
have been enhanced.  
Quick retouch (A70)  
Create a copy of the current picture with enhanced brightness  
and contrast, brightening dark portions of the picture.  
D-Lighting (A71)  
Skin softening (A72)  
Small picture (A73)  
Makes the subject’s skin appear smoother.  
Create a small copy of pictures suitable for use on web pages or  
as e-mail attachments.  
Enlarge the image or refine the composition and create a copy  
containing only the portion visible in the monitor.  
Crop (A74)  
C Notes on In-camera Editing  
Pictures taken at an Image mode setting of P 16:9 (3968) (A94) cannot be edited.  
The COOLPIX S570 editing functions are not available for pictures taken with non-COOLPIX S570  
digital cameras.  
If no faces can be detected in the image, the image cannot be edited with skin softening (A72).  
If a copy created using the COOLPIX S570 is viewed on a different digital camera, the picture may  
not be displayed or may not be transferred to a computer.  
Editing functions are not available when there is not enough free space in the internal memory or  
on the memory card.  
C Restrictions on Picture Editing  
The following limitations apply when editing pictures that were created by editing.  
Copies Created By:  
Can Be Edited By:  
Quick retouch  
D-Lighting  
Skin softening, small picture, or crop can be used.  
Quick retouch and D-Lighting cannot be used together.  
Skin softening  
Quick retouch, D-Lighting, small picture, or crop can be used.  
Small picture  
Crop  
No additional editing functions can be used.  
Copies created by the editing functions cannot be edited again using the same edit function.  
To use an editing function together with small picture or crop, use the other edit function first, and  
use small picture or crop as the last edit function performed on that picture.  
Pictures that were taken using skin softening can be edited using skin softening.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Editing Pictures  
D Original Pictures and Edited Copies  
Copies created with editing functions are not deleted if the original pictures are deleted. The  
original pictures are not deleted if copies created with editing functions are deleted.  
Edited copies are stored with the same recording date and time as the original.  
Print set (A90) and Protect (A109) settings configured for original pictures are not reflected in  
their edited copies.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing Pictures  
Enhancing Contrast and Saturation (Quick Retouch)  
Quick retouch can be used to easily create retouched copies in which contrast and  
saturation have been enhanced. Copies created with the quick retouch option are  
stored as separate files.  
1
Select the desired picture from full-frame  
(A26) or thumbnail (A50) playback mode  
and press the dbutton.  
The playback menu is displayed.  
2
Use the multi selector to choose k Quick  
Playback menu  
Quick retouch  
retouch and press the kbutton.  
D-Lighting  
Skin softening  
Print set  
The original version is displayed on the left and the  
edited version is displayed on the right.  
Slide show  
Exit  
3
Press the multi selector Hor Ito choose the  
amount of enhancement performed and  
press the kbutton.  
Quick retouch  
A new, retouched picture is created.  
Normal  
To cancel, press the dbutton.  
Back  
Amount  
Copies created with the quick retouch option can be  
recognized by the s icon displayed during playback.  
15/11/20009 15:30  
0004.JPG  
4
4
D More Information  
See “File and Folder Names” (A132) for more information.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Editing Pictures  
Enhancing Brightness and Contrast: D-Lighting  
D-Lighting can be used to create copies with enhanced brightness and contrast,  
brightening dark portions of a picture. Enhanced copies are stored as separate  
files.  
1
Select the desired picture from full-frame  
(A26) or thumbnail (A50) playback mode  
and press the dbutton.  
The playback menu is displayed.  
2
Use the multi selector to choose I D-Lighting  
Playback menu  
Quick retouch  
and press the kbutton.  
D-Lighting  
Skin softening  
Print set  
The original version is displayed on the left and the  
edited version is displayed on the right.  
Slide show  
Exit  
3
Choose OK and press the kbutton.  
D-Lighting  
A new copy with enhanced brightness and contrast is  
created.  
To cancel, choose Cancel and press the kbutton.  
OK  
Cancel  
D-Lighting copies can be recognized by the c icon  
displayed during playback.  
15/11/20009 15:30  
0005.JPG  
5
5
D More Information  
See “File and Folder Names” (A132) for more information.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Editing Pictures  
Making Skin Appear Smoother (Skin Softening)  
Skin softening can be applied to faces that are detected in pictures already taken,  
to make skin appear smoother. Pictures edited with this function are stored as  
separate files.  
1
Select the desired picture from full-frame  
(A26) or thumbnail (A50) playback mode  
and press the dbutton.  
The playback menu is displayed.  
2
Use the multi selector to choose e Skin  
Playback menu  
Quick retouch  
softening and press the kbutton.  
D-Lighting  
Skin softening  
Print set  
The screen that allows you to set the amount of skin  
softening appears.  
If no faces can be detected in the image, a warning is  
displayed and the screen returns to the playback menu.  
Slide show  
Exit  
3
4
Press the multi selector Hor Ito choose the  
amount of enhancement performed and press  
the kbutton.  
Skin softening  
A confirmation screen is displayed, and the image is  
displayed zoomed in on the face edited by skin  
softening.  
Normal  
Back  
Amount  
Confirm the results.  
Preview  
Up to 12 faces, in order of proximity to the center of the  
frame, can be enhanced.  
When multiple faces are edited using skin softening,  
use the multi selector Jand Kto switch the face that  
is displayed.  
Back  
Save  
To adjust the amount of skin softening, press the d  
button and return to step 3.  
Press the kbutton to create a copy edited with skin  
softening.  
Pictures edited with skin softening can be recognized  
by the E icon displayed during playback.  
15/11/20009 15:30  
0004.JPG  
4
4
C Notes on Skin Softening  
Depending on conditions such as the direction the subject is facing or the brightness of the face, the  
face may not be detected properly, or the desired effect may not be achieved.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Editing Pictures  
Resizing Pictures: Small Picture  
Create a small copy of the current picture. The following sizes are available. Copies  
are stored as separate files with a compression ratio of 1:16.  
Option  
Description  
Suited to television playback.  
l 640×480  
m 320×240  
n 160×120  
Suited to display on web pages.  
Suited to e-mail attachments.  
1
2
Select the desired picture from full-frame  
(A26) or thumbnail (A50) playback mode  
and press the dbutton.  
The playback menu is displayed.  
Use the multi selector to choose g Small  
picture and press the kbutton.  
Playback menu  
Delete  
Protect  
Rotate image  
Small picture  
Voice memo  
Exit  
3
4
Choose the desired copy size and press the k  
button.  
Small picture  
6 4 0 × 4 8 0  
3 2 0 × 2 4 0  
1 6 0 × 1 2 0  
Exit  
Choose Yes and press the kbutton.  
A new, smaller copy is created.  
To cancel, choose No and press the kbutton.  
The copy is displayed with a gray frame.  
Create small picture file?  
No  
Yes  
D More Information  
See “File and Folder Names” (A132) for more information.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Editing Pictures  
Creating a Cropped Copy: Crop  
Create a copy containing only the portion visible in the monitor when u is  
displayed with playback zoom (A52) enabled. Cropped copies are stored as  
separate files.  
1
Rotate the zoom control to g(i) in full-frame  
playback mode to zoom in on the image.  
To crop a picture displayed in “tall” (portrait)  
orientation, zoom in on the picture until the black bars  
displayed on the both sides of the monitor disappear.  
The cropped picture will be displayed in landscape  
orientation. To crop the picture in its current “tall” (portrait) orientation, first, use the  
Rotate image option (A110) to rotate the picture so that it is displayed in  
landscape orientation. Next, enlarge the picture for cropping, crop the picture, and  
then rotate the cropped picture back to “tall” (portrait) orientation.  
2
Refine copy composition.  
Rotate the zoom control to g(i) or f(h) to adjust  
the zoom ratio.  
Press the multi selector H, I, Jor Kto scroll the  
picture until only the portion you want to copy is visible  
in the monitor.  
3
4
Press the dbutton.  
Use the multi selector to choose Yes and  
press the kbutton.  
Save this image as  
displayed?  
A new picture, containing only the portion visible in  
the monitor, is created.  
To cancel, choose No and press the kbutton.  
No  
Yes  
C Image Size  
As the area to be saved is reduced, the image size (pixels) of the cropped copy is also reduced.  
When the size of the cropped copy is 320 × 240 or 160 × 120, the small picture icon B or C is  
displayed on the left of the screen in full-frame playback mode.  
D More Information  
See “File and Folder Names” (A132) for more information.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Movies  
Recording Movies  
To shoot movies with sound recorded via the built-in microphone, select shooting  
mode and follow the steps below.  
1
2
Enter movie mode by pressing the  
A button in shooting mode and  
selecting D (press the multi selector  
Hor I), and then pressing the k  
button.  
Movie  
The maximum length of the movie that can  
be recorded is displayed in the monitor  
(A76).The maximum movie length for each movie is 25 minutes, regardless of  
memory card capacity.  
Press the shutter-release button all  
the way down to start recording.  
The camera focuses on the subject in the  
center of the frame.  
A progress bar at the bottom of the  
monitor shows the amount of recording  
time remaining.  
20s  
To end recording, press the shutter-release button all the way down a second time.  
If recording time runs out, recording stops automatically.  
B Recording Movies  
Macro mode (A31) is enabled. Flash (A28), self-timer (A30), and exposure compensation  
(A32) are disabled.  
Macro mode setting cannot be applied or changed while movies are being recorded. Apply or  
change setting as necessary before movie recording begins.  
Optical zoom cannot be adjusted once movie recording begins. Digital zoom cannot be applied  
before movie recording begins. However, digital zoom (up to 2×) can be applied while movies are  
being recorded.  
The angle of view (field of view) when recording movies is smaller than when taking still pictures.  
B Note on Recording Movies  
When the movie has been fully recorded to the internal memory or memory card, the monitor  
display will revert to the normal shooting mode display. Do not open the battery-chamber/  
memory card slot cover while movies are being recorded. Removing the memory card while  
movies are being recorded could result in loss of data or in damage to the camera or card.  
C Changing Movie Settings  
Movie options (A76), Autofocus mode (A77), and Electronic VR (A77) settings can be  
changed.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
The Movie Menu  
Movie options, Autofocus mode (A77), and Electronic VR (A77) settings  
can be changed. Press the dbutton in movie mode to display the movie menu  
and use the multi selector to modify and apply settings.  
D Movie Options  
Set to D (Movie) Md(Movie menu) MD Movie options  
The movie menu offers the options shown below.  
Option  
Image size and frame rate  
J TV movie 640P  
(default setting)  
Image size: 640 × 480 pixels  
Frame rate: 30 frames per second  
Image size: 640 × 480 pixels  
Frame rate: 15 frames per second  
I TV movie 640  
L Small size 320P  
S Small size 320  
Image size: 320 × 240 pixels  
Frame rate: 30 frames per second  
Image size: 320 × 240 pixels  
Frame rate: 15 frames per second  
C Movie Options and Maximum Movie Length  
Internal memory  
(approx. 47 MB)  
Option  
Memory card (512 MB)  
J TV movie 640P  
31 s  
Approx. 5 min 40 s  
(default setting)  
I TV movie 640  
L Small size 320P  
S Small size 320  
56 s  
1 min 53 s  
3 min 34 s  
Approx. 10 min 20 s  
Approx. 20 min 40 s  
Approx. 25 min  
*
All figures are approximate. The maximum recording time may vary with make of memory card.  
The maximum movie length for each movie is 25 minutes, regardless of memory card capacity.  
The maximum recording time that is displayed is the maximum recording time for one movie.  
D More Information  
See “File and Folder Names” (A132) for more information.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
The Movie Menu  
I Autofocus Mode  
Set to D (Movie) Md(Movie menu) MI Autofocus mode  
Choose how the camera focuses in movie mode.  
Option  
ASingle AF  
(default setting)  
Description  
Focus is locked when the shutter-release button is pressed.  
The camera focuses continuously.  
To prevent the sound of the camera focusing from interfering with  
recording, use of Single AF is recommended.  
BFull-time AF  
w Electronic VR  
Set to D (Movie) Md(Movie menu) Mw Electronic VR  
Choose whether to use electronic VR (vibration reduction) when shooting movies.  
Option  
Description  
w On  
Reduce the effects of camera shake in all movie modes.  
k Off (default setting) Disable electronic VR.  
When vibration reduction is enabled, the current setting is displayed during  
shooting (when Off is selected, an icon for the current setting is not displayed)  
(A6).  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Movie Playback  
In full-frame playback mode (A26), movies are  
recognized by the Movie options icon (A76). To play  
a movie, display it in full-frame playback mode and  
press the kbutton.  
15/11/20009 15:30  
0010.AVI  
10s  
Rotate the zoom control to gor fto adjust playback  
volume.  
Pausing  
Playback controls appear at the top of the monitor.  
Press the multi selector Jor Kto choose a control,  
then press the kbutton to perform the selected  
operation. The following operations are available.  
4s  
During  
playback  
Volume  
indicator  
To  
Rewind  
Use  
Description  
Rewind movie. Playback resumes when the kbutton is  
K
released.  
Advance movie. Playback resumes when the kbutton is  
released.  
Advance  
L
Pause playback.  
While paused, use the controls to perform the following  
operations.  
Rewind movie by one frame. Rewind continues while the  
kbutton is pressed.  
M
Pause  
End  
O
Q
Advance movie by one frame. Advance continues while  
the kbutton is pressed.  
N
P
Resume playback.  
End playback and return to full-frame playback.  
Deleting Movie Files  
Erase 1 image?  
Press the lbutton when displayed in full-frame  
playback mode (A50). A confirmation dialog is  
displayed. Choose Yes and press the kbutton to delete  
the movie, or choose No and press the kbutton to  
No  
Yes  
return to the normal playback display without deleting the movie.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Connecting to Televisions, Computers and Printers  
Connecting to a TV  
Connect the camera to a television using the supplied audio/video cable (AV  
cable) to play back pictures on the television.  
1
Turn off the camera.  
2
Connect the camera to the TV using the supplied AV cable.  
Connect the yellow plug to the video-in jack on the TV, and the white plug to the  
audio-in jack.  
Yellow  
White  
3
4
Tune the television to the video channel.  
See the documentation provided with your television for details.  
Hold down the cbutton to turn on the  
camera.  
The camera enters playback mode, and the pictures  
taken will be displayed on the television.  
While connected to the TV, the camera monitor will  
remain off.  
B Connecting the Audio/Video Cable  
When connecting the AV cable, be sure that the camera connector is oriented correctly. Do not use  
force when connecting the AV cable to the camera. When disconnecting the AV cable, do not pull  
the connector at an angle.  
B Video Mode  
Be sure that the camera’s video mode setting conforms to the standard used by your television. The  
video mode setting is an option set in the setup menu (A112) Video mode (A126).  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Connecting to a Computer  
Use the supplied USB cable to connect the camera to a computer, and copy  
(transfer) pictures to the computer with the supplied Nikon Transfer software.  
Before Connecting the Camera  
Install the Software  
Before connecting the camera to a computer, software, including Nikon Transfer,  
ViewNX for displaying transferred pictures, and Panorama Maker for creating  
panorama photos, must be installed from the supplied Software Suite CD. For  
more information on installing the software, refer to the Quick Start Guide.  
Compatible Operating Systems  
Windows  
Preinstalled versions of Windows Vista Home Basic/Home Premium/Business/  
Enterprise/Ultimate (Service Pack 1, 32-bit version)  
Windows XP Home Edition/Professional (Service Pack 3)  
Macintosh  
Mac OS X (version 10.3.9, 10.4.11, 10.5.6)  
Refer to the Nikon website for the latest information on operating system  
compatibility.  
B Notes on Power Source  
When connecting the camera to a computer, use a fully charged battery to prevent the camera  
from turning off unexpectedly.  
If the AC Adapter EH-62D (available separately) is used, COOLPIX S570 can be powered from a  
home electrical outlet. Do not use any other AC adapters as it will cause the camera to heat up or  
malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
80  
           
Connecting to a Computer  
Transferring Pictures from the Camera to a Computer  
1
2
3
Start the computer to which Nikon Transfer was installed.  
Turn off the camera.  
Connect the camera to the computer using the supplied USB cable.  
4
Turn on the camera.  
The power-on lamp will light up. The camera monitor will  
remain off.  
Windows Vista  
When the AutoPlay dialog is displayed on the  
computer, click Copy pictures to a folder on my computer using Nikon  
Transfer. Nikon Transfer will start.  
To bypass this dialog in the future, check Always do this for this device.  
Windows XP  
When the action selection dialog is displayed, select Nikon Transfer Copy pictures  
to a folder on my computer and click OK. Nikon Transfer will start.  
To bypass this dialog in the future, check Always use this program for this action..  
Mac OS X  
Nikon Transfer will start automatically if Yes was selected in the Auto-Launch setting  
dialog when Nikon Transfer was first installed.  
B Connecting the USB Cable  
When connecting the USB cable, be sure that the connectors are oriented correctly.  
Do not use force when connecting the USB cable. When disconnecting the USB cable, do not pull  
the connector at an angle.  
Connection may not be recognized when the camera is connected to a computer via a USB hub.  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Connecting to a Computer  
5
Confirm that the source device is displayed in the transfer options  
Source panel and click Start Transfer.  
Source Device  
Start Transfer  
button  
At the Nikon Transfer default setting, all pictures are transferred to the computer.  
At the Nikon Transfer default settings, ViewNX starts automatically when transfer is  
complete and transferred pictures can be viewed.  
For more information on using Nikon Transfer or ViewNX, refer to help information  
contained in Nikon Transfer or ViewNX (A83).  
Disconnecting the Camera and Computer  
While transferring, do not turn the camera off or disconnect the camera and  
computer.  
When disconnecting, turn the camera off, then disconnect the USB cable.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting to a Computer  
C Using a Card Reader  
The pictures stored on the memory card inserted into a card reader or similar device can also be  
transferred to the computer using Nikon Transfer.  
If the memory card has a capacity greater than 2 GB, or is SDHC-compliant, the intended device  
must support these features of the memory card.  
Insert the memory card into the card reader or similar device, then refer to step 4 (A81) and  
transfer pictures.  
To transfer pictures stored in the camera’s internal memory to the computer, the pictures must  
first be copied to a memory card using the camera (A110).  
D Starting Nikon Transfer or ViewNX Manually  
Windows: From the Start menu, open All Programs Nikon Transfer Nikon Transfer (or  
All Programs ViewNX ViewNX). You can also double-click the Nikon Transfer or  
ViewNX shortcut icon on the desktop.  
Mac OS X: Open the Applications folder, then double-click Nikon Software Nikon Transfer  
Nikon Transfer (or Nikon Software ViewNX ViewNX). You can also click the Nikon  
Transfer or ViewNX icon in the dock.  
D Viewing the Help File for Nikon  
Transfer or ViewNX  
For details on using Nikon Transfer or  
ViewNX, view the help file by starting Nikon  
Transfer or ViewNX, then selecting Help ➝  
Nikon Transfer Help or ViewNX Help.  
D Panorama Creation with Panorama Maker  
Use a series of pictures taken using the Panorama assist option in scene mode (A40) to create  
a single panorama photo with Panorama Maker.  
Panorama Maker can be installed to a computer using the supplied Software Suite CD.  
After installation is complete, follow the procedure described below to start Panorama Maker.  
Windows  
Choose Start menu>All Programs>ArcSoft Panorama Maker 4>Panorama Maker 4.  
Macintosh  
Open Applications by selecting Applications from the Go menu, and double-click the  
Panorama Maker 4 icon.  
For more information on using Panorama Maker, refer to the on-screen instructions and help  
information contained in Panorama Maker.  
D Image File Names and Folder Names  
See “File and Folder Names” (A132) for more information.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Connecting to a Printer  
Users of PictBridge-compatible (A152) printers can connect the camera directly  
to the printer and print pictures without using a computer.  
Take pictures  
Select pictures for printing  
using Print set option (A90)  
Connect to printer (A85)  
Print pictures one at a  
Print multiple pictures (A87)  
time (A86)  
Turn camera off and disconnect USB cable  
B Notes on Power Source  
When connecting the camera to a printer, use a fully charged battery to prevent the power from  
turning off unexpectedly.  
If the AC Adapter EH-62D (available separately) is used, COOLPIX S570 can be powered from a  
home electrical outlet. Do not use any other AC adapters as it will cause the camera to heat up or  
malfunction.  
D Printing Pictures  
In addition to printing pictures transferred to a computer from your personal printer and printing  
over a direct camera-to-printer connection, the following options are also available for printing  
pictures:  
Insert a memory card into a DPOF-compatible printer’s card slot  
Take a memory card to a digital photo lab  
For printing using these methods, specify the pictures and the number of prints each using the  
Print set in the playback menu (A90).  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting to a Printer  
Connecting the Camera and Printer  
1
Turn off the camera.  
2
3
Turn on the printer.  
Check printer settings.  
Connect the camera to the printer using the supplied USB cable.  
4
Turn on the camera.  
When connected correctly, the PictBridge startup  
screen (1) will be displayed in the camera monitor.  
Then the Print selection screen (2) will be displayed.  
1
2
Print selection  
1 5 / 1 1  
2 0 0 9  
NO.  
[
4
4
]
B Connecting the USB Cable  
When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use force  
when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an  
angle.  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting to a Printer  
Printing Pictures One at a Time  
After connecting the camera to the printer correctly (A85), print pictures by  
following the procedures below.  
1
2
3
4
5
Use the multi selector to choose the desired  
picture and press the kbutton.  
Print selection  
1 5 / 1 1  
2 0 0 9  
Rotate the zoom control to f(h) to switch to 12-  
thumbnail display, and to g(i) to switch back to full-  
frame playback.  
NO.  
[
4
4
]
Choose Copies and press the kbutton.  
PictBridge  
Start print  
Copies  
Paper size  
Exit  
Choose the number of copies (up to nine) and  
press the kbutton.  
Copies  
4
Exit  
Choose Paper size and press the kbutton.  
PictBridge  
Start print  
Copies  
Paper size  
Exit  
Choose the desired Paper size and press the  
kbutton.  
Paper size  
Default  
3.5×5 in.  
5×7 in.  
Postcard  
100×150 mm  
Exit  
To specify paper size using printer settings, choose  
Default in the paper size menu.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting to a Printer  
6
7
Choose Start print and press the kbutton.  
PictBridge  
Start print  
Copies  
Paper size  
Exit  
Printing starts.  
Monitor display returns to the print selection screen  
(step 1) when printing is complete.  
Printing  
0 0 2  
/
0 0 4  
To cancel before all copies have been printed, press the  
kbutton.  
Cancel  
Current print/  
total number of prints  
Printing Multiple Pictures  
After connecting the camera to the printer correctly (A85), print pictures by  
following the procedures below.  
1
2
When the print selection screen is displayed,  
press the dbutton.  
The print menu is displayed.  
Use the multi selector to choose Paper size  
and press the kbutton.  
Print menu  
Print selection  
Print all images  
DPOF printing  
To exit the print menu, press the dbutton.  
Paper size  
Exit  
3
Choose the desired Paper size and press the  
Paper size  
kbutton.  
4×6 in.  
8×10 in.  
Letter  
A3  
To specify paper size using printer settings, choose  
Default in the paper size menu.  
A4  
Exit  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting to a Printer  
4
Choose Print selection, Print all images or  
DPOF printing and press the kbutton.  
Print menu  
Print selection  
Print all images  
DPOF printing  
Paper size  
Exit  
Print selection  
Choose the pictures (up to 99) and the number  
of copies (up to nine) of each.  
Print selection  
3
Press the multi selector Jor Kto select  
pictures, and press Hor Ito set the number  
of copies for each.  
1
1
1
Picture selected for printing can be  
recognized by the check mark (y) and the  
numeral indicating the number of copies to  
be printed. Check marks are not displayed  
with pictures for which no copies have been  
specified and these pictures will not be  
printed.  
Back  
Rotate the zoom control to g(i) to switch to  
full-frame playback.  
Rotate the zoom control to f(h) to switch  
back to 12-thumbnail display.  
Press the kbutton when setting is complete.  
When the menu shown at right is displayed,  
choose Start print and press the kbutton  
to start printing. Choose Cancel and press  
the kbutton to return to the print menu.  
Print selection  
prints  
0 0 3  
Start print  
Cancel  
Exit  
Print all images  
All pictures stored in the internal memory, or on  
the memory card, are printed one at a time.  
Print all images  
prints  
0 0 4  
When the menu shown at right is displayed,  
choose Start print and press the kbutton  
to start printing.  
Start print  
Cancel  
Exit  
Choose Cancel and press the kbutton to  
return to the print menu.  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a Printer  
DPOF printing  
Print pictures for which a print order was  
created in Print set (A90).  
DPOF printing  
prints  
0 1 0  
When the menu shown at right is displayed,  
choose Start print and press the kbutton  
to start printing.  
Start print  
View images  
Cancel  
Choose Cancel and press the kbutton to  
Exit  
return to the print menu.  
To view the current print order, choose View  
images and press the kbutton. To print  
pictures, press the kbutton again.  
View images  
1 0  
Back  
5
Printing starts.  
Monitor display returns to the print menu (step 2) when  
printing is complete.  
Printing  
0 0 2  
/
0 1 0  
To cancel before all copies have been printed, press the  
kbutton.  
Cancel  
Current print/  
total number of prints  
C Paper Size  
The camera supports the following paper sizes: Default (the default paper size for the current  
printer), 3.5×5 in., 5×7 in., 100×150 mm, 4×6 in., 8×10 in., Letter, A3, and A4. Only sizes  
supported by the current printer will be displayed. To specify paper size using printer settings,  
choose Default in the paper size menu.  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Creating a DPOF Print Order: Print Set  
The Print set option in the playback menu is used to create digital “print orders”  
for printing on DPOF-compatible devices (A152).  
When the camera is connected to a PictBridge-compatible printer, pictures can be  
printed from the printer according to the DPOF print order you have created for  
pictures on the memory card. If the memory card is removed from the camera, you  
can create the DPOF print order for pictures in the internal memory and print  
pictures according to the DPOF print order.  
1
Press the dbutton in playback mode.  
The playback menu is displayed.  
2
Use the multi selector to choose Print set and  
Playback menu  
Quick retouch  
press the kbutton.  
D-Lighting  
Skin softening  
Print set  
When using list by date, auto sort, or favorite pictures  
playback mode: Proceed to step 4  
Slide show  
Exit  
3
4
Choose Select images and press the k  
Print set  
button.  
Select images  
Delete print set  
Exit  
Choose the pictures (up to 99) and the  
number of copies (up to nine) for each.  
Print selection  
1
1
1
Press the multi selector Jor Kto select pictures, and  
press Hor Ito set the number of copies for each.  
Picture selected for printing can be recognized by the  
check mark (y) icon and the numeral indicating the  
number of copies to be printed. Check marks are not  
Back  
displayed with pictures for which no copies have been specified and these pictures  
will not be printed.  
Rotate the zoom control to g(i) to switch to full-frame playback.  
Rotate the zoom control to f(h) to switch back to 12-thumbnail display.  
Press the kbutton when setting is complete.  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Creating a DPOF Print Order: Print Set  
5
Choose whether or not to print shooting date  
and photo information.  
Print set  
Done  
Choose Date and press the kbutton to print the  
shooting date on all pictures in the print order.  
Choose Info and press the kbutton to print shutter  
speed and aperture information on all pictures in the  
print order.  
Date  
Info  
Exit  
Choose Done and press the kbutton to complete the print order and exit.  
Pictures selected for printing are recognized by the w  
icon displayed with playback.  
15/11/20009 15:30  
0004.JPG  
4
4
C Deleting All Print Orders  
Choose Delete print set in step 3 and press the kbutton to delete print orders for all pictures.  
B Notes on the Print Set Option  
When using Print set while viewing pictures by List by date, Auto  
sort, or Favorite pictures playback, if pictures other than the selected  
date or type are already set for printing, the screen shown at right  
will be displayed.  
Print set  
Save print marking for other  
dates?  
If Yes is selected, the current settings are added to the previous  
settings.  
No  
Yes  
Exit  
If No is selected, the previous settings are deleted and only the  
current settings remain.  
When using List by date  
Print set  
Save print marking for other  
images?  
No  
Yes  
Exit  
When using Auto sort/  
Favorite pictures  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Creating a DPOF Print Order: Print Set  
If more than 99 pictures are selected as a result of adding the  
current settings, the screen shown at right will be displayed.  
If Yes is selected, the previous settings are deleted and only the  
Print set  
Too many images selected.  
Remove print marking for  
other dates?  
current settings remain.  
If Cancel is selected, the current settings are deleted and only the  
previous settings remain.  
Yes  
Cancel  
Exit  
When using List by date  
Print set  
Too many images selected.  
Remove print marking from  
other images?  
Yes  
Cancel  
Exit  
When using Auto sort/  
Favorite pictures  
B Notes on Printing Shooting Date and Photo Information  
When the Date and Info options are enabled in the Print set menu, shooting date and photo  
information are printed on pictures when a DPOF-compatible (A152) printer which supports  
printing of shooting date and photo information is used.  
Photo information cannot be printed when the camera is connected directly to a printer, via the  
supplied USB cable, for DPOF printing (A89).  
Date and Info are reset each time the print set menu is displayed.  
The date and time printed on pictures with DPOF printing when  
Date in the Print set menu is enabled, are those recorded with  
the picture as it was taken. Date and time printed using this  
option are not affected when the camera’s date and time setting  
are changed from the setup menu after pictures are recorded.  
15.11..2009  
D Date Imprint  
The shooting date and time can be imprinted in pictures at the time of shooting by using Date  
imprint (A120) in the setup menu. This information can be printed even from printers that do not  
support printing of date and time. Only the date with the Date imprint option will be printed, even  
if Print set is enabled with Date selected in the print set screen.  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shooting, Playback and Setup Menus  
Shooting Options: The Shooting Menu  
While shooting in A(auto) mode (A20), the shooting menu contains the  
following options.  
A
Image mode  
Choose the image mode (a combination of the image size and image quality  
(compression)) to be used when recording.  
Also available when using other shooting modes (except movie mode).  
B
C
E
F
G
White balance  
Match white balance to the light source.  
Continuous  
Change settings for Continuous or BSS (best shot selector).  
ISO sensitivity  
Control the camera’s sensitivity to light.  
Color options  
Apply color effects to pictures as they are recorded.  
AF area mode  
Choose how the focus area is determined.  
Displaying the Shooting Menu  
Enter A(auto) mode (A20).  
Press the dbutton to display the shooting menu.  
Shooting menu  
Image mode  
White balance  
Continuous  
ISO sensitivity  
Color options  
Exit  
11  
Use the multi selector to choose and apply settings (A9).  
To exit the shooting menu, press the dbutton.  
B Functions that Cannot Be Applied Simultaneously  
Some functions cannot be enabled in conjunction with others (A105).  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Shooting Options: The Shooting Menu  
A Image Mode  
Set to A(auto) Md(Shooting menu) MA Image mode  
Choose an image mode, which is the combination of image size and image quality  
(compression), according to how you plan to use the picture and the capacity of  
the internal memory or memory card.  
The larger the image, the larger the size at which it can be printed or displayed  
without becoming noticeably “grainy”, limiting the number of pictures that can be  
recorded.  
Image size  
(pixels)  
Image mode  
Description  
Highest quality, suitable for enlargements  
or high-quality prints. The compression  
ratio is approximately 1:4.  
H
I
High (4000P)  
4,000×3,000  
Normal (4000)  
(default setting)  
4,000×3,000  
The best choice in most situations. The  
compression ratio is approximately 1:8.  
R
L
Normal (3264)  
Normal (2592)  
3,264×2,448  
2,592×1,944  
Smaller size allows more pictures to be  
stored. The compression ratio is  
approximately 1:8.  
M
N
O
Normal (2048)  
PC screen (1024)  
TV screen (640)  
2,048×1,536  
1,024×768  
640×480  
Suited to display on computer monitor. The  
compression ratio is approximately 1:8.  
Suited to full-screen display on a television  
or distribution by e-mail or the web. The  
compression ratio is approximately 1:8.  
Pictures with an aspect ratio of 16:9 can be  
taken. The compression ratio is  
approximately 1:8.  
P
16:9 (3968)  
3,968×2,232  
The icon for the current setting is displayed in the monitor in shooting and  
playback modes (A6, 7).  
C Image Mode  
Change made to this setting applies to all shooting modes (except movie mode).  
This feature cannot be used simultaneously with certain features. “Functions that Cannot Be  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Shooting Options: The Shooting Menu  
C Number of Exposures Remaining  
The following table lists the approximate number of pictures that can be stored in internal memory  
and on a 512 MB memory card. Note that the number of pictures that can be stored will differ  
depending on the composition of the picture (due to JPEG compression). In addition, this number  
may differ depending on the make of memory card, even if the capacity for the memory card is the  
same.  
Internal  
memory  
(approx. 47 MB)  
1
2
Memory card  
(512 MB)  
Print size  
(cm/in.)  
Setting  
H
I
R
L
M
N
O
P
High (4000P)  
Normal (4000)  
Normal (3264)  
Normal (2592)  
Normal (2048)  
PC screen (1024)  
TV screen (640)  
16:9 (3968)  
5
11  
60  
120  
34 × 25/13 × 10  
34 × 25/13 × 10  
28 × 21/11 × 8  
22 × 16/8.5 × 6.5  
17 × 13/7 × 5  
17  
190  
29  
310  
48  
520  
162  
280  
15  
1780  
3070  
170  
9 × 7/3.5 × 2.5  
5 × 4/2 × 1.5  
34 × 19/13 × 7.5  
1
2
If the number of exposures remaining is 10,000 or more, the number of exposures  
remaining display shows “9999”.  
All figures are approximate. Print size at an output resolution of 300 dpi. Print sizes are  
calculated by dividing the number of pixels by printer resolution (dpi) and multiplying by  
2.54 cm (1 in.). However, at the same image size, pictures printed at higher resolutions will  
print smaller than the size indicated, and those printed at lower resolutions will print larger  
than the size indicated.  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Shooting Options: The Shooting Menu  
B White Balance  
Set to A(auto) Md(Shooting menu) MB White balance  
The color of light reflected from an object varies with the color of the light source.  
The human brain is able to adapt to changes in the color of the light source, with  
the result that white objects appear white whether seen in the shade, direct  
sunlight, or under incandescent lighting. Digital cameras can mimic this  
adjustment by processing images according to the color of the light source. This is  
known as “white balance”. For natural coloration, choose a white balance setting  
that matches the light source before shooting. Although the default setting, Auto,  
can be used under most types of lighting, you can apply the white balance setting  
suited to a particular light source to achieve more accurate results.  
a
Auto (default setting)  
White balance automatically adjusted to suit lighting conditions. Best choice in  
most situations.  
b
Preset manual  
Neutral-colored object used as reference to set white balance under unusual  
lighting conditions. Refer to “Preset Manual” for more information (A97).  
c
d
e
f
g
Daylight  
White balance adjusted for direct sunlight.  
Incandescent  
Use under incandescent lighting.  
Fluorescent  
Use under most types of fluorescent lighting.  
Cloudy  
Use when taking pictures under overcast skies.  
Flash  
Use with the flash mode.  
The effects of the selected option can be previewed in the monitor. At settings  
other than Auto, the icon for the current setting is displayed in the monitor (A6).  
B White Balance  
This feature cannot be used simultaneously with certain features. “Functions that Cannot Be  
B Flash Mode  
At white-balance settings other than Auto or Flash, turn the flash off (W) (A28).  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Shooting Options: The Shooting Menu  
Preset Manual  
Preset manual is used with mixed lighting or to compensate for light sources with  
a strong color cast when the desired effect has not been achieved with white  
balance settings like Auto and Incandescent (for example, to make images shot  
under a lamp with a red shade look as though they had been shot under white  
light).  
1
2
Place a white or gray reference object under the lighting that will be  
used during shooting.  
Display the shooting menu (A93), use the  
White balance  
multi selector to set White balance to b  
Auto  
Preset manual  
Daylight  
Incanddescennt  
Fluoresscent  
Preset manual, then press the kbutton.  
The camera zooms in.  
Exit  
3
4
Choose Measure.  
Preset manual  
To apply the most recently measured value for preset  
manual, choose Cancel and press the kbutton.  
Cancel  
Measure  
Exit  
Frame the reference object.  
Preset manual  
Cancel  
Measure  
Exit  
Reference object frame  
5
Press the kbutton.  
The shutter is released and the new white balance value is set (no picture is recorded).  
B Note on Preset Manual  
The camera cannot measure a white balance value for when the flash fires. When shooting with the  
flash, set White balance to Auto or Flash.  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Shooting Options: The Shooting Menu  
C Continuous  
Set to A(auto) Md(Shooting menu) MC Continuous  
Change settings to Continuous or BSS (best shot selector). Flash will be switched  
off for Continuous, BSS or Multi-shot 16, and focus, exposure and white  
balance are fixed at the values for the first picture in each series.  
U
Single (default setting)  
One shot is taken each time shutter-release button is pressed.  
Continuous  
V
While the shutter-release button is held down, the camera shoots up to 5 pictures at a rate  
of up to about 0.9 frames per second (fps) (when image mode is set to  
I
Normal (4000)).  
D
W
BSS (Best Shot Selector)  
The “best shot selector” is recommended when shooting with the flash off or the  
camera zoomed in, or in other situations in which inadvertent motion can result in  
blurred pictures. When BSS is on, the camera takes up to ten pictures while the  
shutter-release button is held down. The sharpest picture in the series is  
automatically selected and saved.  
Multi-shot 16  
Each time the shutter-release button is pressed all the way  
down, 16 pictures are shot at about 24 frames per second and  
the camera arranges them in a single picture.  
Images are captured with the image mode locked at L 2592.  
Digital zoom is not available.  
At settings other than Single, the indicator for the current setting is displayed in  
the monitor (A6).  
B Note on Continuous Shooting  
The maximum frame rate with continuous shooting may vary, depending upon the current image  
mode setting and the memory card used.  
This feature cannot be used simultaneously with certain features. “Functions that Cannot Be  
B Note on BSS  
BSS may not produce the desired results if the subject moves or the composition changes while the  
shutter-release button is pressed all the way down.  
B Note on Multi-shot 16  
Smear (A136) visible in the monitor when shooting with Multi-shot 16 enabled will be recorded  
with images. Avoiding bright objects such as the sun, reflections of the sun, and electric lights when  
shooting with Multi-shot 16 enabled is recommended.  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Shooting Options: The Shooting Menu  
E ISO Sensitivity  
Set to A(auto) Md(Shooting menu) ME ISO sensitivity  
Sensitivity is a measure of how quickly the camera reacts to light. The higher the  
sensitivity, the less light needed to make an exposure. Although a high ISO rating  
is suited for taking pictures of subjects in action or in poor lighting, high sensitivity  
is often associated with “noise” - randomly spaced, brightly colored pixels  
concentrated in dark parts of the image.  
Auto (default setting)  
Sensitivity is ISO 80 under normal conditions; when lighting is poor and the flash is  
off, the camera compensates by raising sensitivity to a maximum of ISO 1600.  
Fixed range auto  
Choose the range in which the camera automatically adjusts ISO sensitivity, from  
ISO 80-400 (default setting), or ISO 80-800. The camera will not raise sensitivity  
beyond the maximum value in the selected range. Set the maximum value for ISO  
sensitivity for effective control over the amount of “grain” that appears in images.  
80, 100, 200, 400, 800, 1600, 3200  
Sensitivity will be locked at the specified value.  
When ISO sensitivity is locked, Motion detection (A122) does not function.  
At the settings other than Auto, the current setting is displayed in the monitor  
(A6). If Auto is selected and the sensitivity is raised above ISO 80, the E icon  
will be displayed (A29). When set to Fixed range auto, U and the upper limit  
of the ISO sensitivity is displayed.  
B Notes on ISO Sensitivity  
This feature cannot be used simultaneously with certain features. “Functions that Cannot Be  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Shooting Options: The Shooting Menu  
F Color Options  
Set to A(auto) Md(Shooting menu) MF Color options  
Make colors more vivid or record pictures in monochrome.  
n
o
p
q
r
Standard color (default setting)  
Use for pictures exhibiting natural color.  
Vivid color  
Use to achieve a vivid, “photoprint” effect.  
Black-and-white  
Record pictures in black-and-white.  
Sepia  
Record pictures in sepia tones.  
Cyanotype  
Record pictures in cyan-blue monochrome.  
The effects of the selected option can be previewed in the monitor (A6). At  
settings other than Standard color, the icon for the current setting is displayed in  
the monitor.  
B Notes on Color Options  
This feature cannot be used simultaneously with certain features. “Functions that Cannot Be  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Shooting Options: The Shooting Menu  
G AF Area Mode  
Set to A(auto) Md(Shooting menu) MG AF area mode  
Choose how the focus area is determined.  
When digital zoom is in effect, focus will be on the center of the screen regardless  
of the AF area mode setting.  
a
Face priority (default setting)  
If the camera detects a face, it focuses on the face  
(Face Priority A103). If more than one face is  
recognized, focus will be on the face closest to the  
camera.  
When shooting pictures of subjects other than  
people, or framing a subject with which no face is  
recognized, AF area mode will switch to Auto, and  
the camera will automatically select the focus area  
(one of nine) containing the subject closest to the  
camera.  
11  
w
Auto  
The camera automatically selects the focus area (one  
of nine) containing the subject closest to the camera.  
Press the shutter-release button halfway to activate  
the focus area. When the shutter-release button is  
pressed halfway, the focus area selected by the  
camera will be displayed in the monitor.  
11  
Focus areas  
Focus area  
x
Manual  
This option is suited to situations in which the  
intended subject is relatively still and not positioned  
in the center of the frame.  
Press the multi selector H, I, J, or Kto select from  
99 focus areas in the frame. Pictures can be taken  
while focus-area selection screen is displayed.  
To end focus-area selection and adjust the flash,  
macro, self-timer and exposure compensation  
settings, press the kbutton. To return to the focus  
area selection screen, press the kbutton again.  
Selectable focus area  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Shooting Options: The Shooting Menu  
y
Center  
The camera focuses on the subject in the center of  
the frame.  
The center focus area is always displayed.  
11  
Focus area  
D Focus Lock  
Use focus lock to focus on off-center subjects when center is selected for AF area mode.  
To focus on off-center subjects when Center is selected for AF area mode, use focus lock as  
described below.  
1
2
3
4
Position the subject in the center of the frame.  
11  
Press the shutter-release button halfway.  
Confirm that the focus area is green.  
Focus and exposure are locked.  
1/125 F2.7  
Continue holding down the shutter-release button halfway  
and recompose the picture.  
Be sure that the distance between the camera and the subject does  
not change.  
1/125 F2.7  
Press the shutter-release button the rest of the way down to take the  
picture.  
D More Information  
See “Autofocus” (A25) for more information.  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Shooting Options: The Shooting Menu  
Face Priority  
When the camera is pointed at a face, the face is automatically detected and the  
camera focuses on the face.  
Face priority functions in the following situations.  
When AF area mode is set to Face priority (default setting) (A101)  
When scene mode is set to Scene auto selector (A34), Portrait (A34), or  
Night portrait (A35)  
When using smart portrait mode (A47)  
1
Frame a picture.  
When the camera detects a face, that face will be  
framed by a yellow double border.  
11  
When the camera detects more than one face, operation varies, depending upon the  
shooting mode, as follows.  
Faces framed by a double The number of faces  
Shooting mode  
border  
to be recognized  
A
(auto) mode (Face priority)  
The face closest to the  
camera  
* The other faces are  
framed by a single border.  
Scene mode: Scene auto  
selector, Portrait, Night  
portrait  
Up to 12  
The face closest to the  
center of the frame  
* The other faces are  
framed by a single border.  
Smart portrait mode  
Up to 3  
2
Press the shutter-release button halfway.  
Focus will be on the face framed by the double border. The  
double border will glow green once focus has been locked.  
When the camera is unable to focus, the double border  
will blink. Press the shutter-release button halfway again  
and focus.  
Press the shutter-release button the rest of the way  
down to take the picture.  
When using smart portrait mode, even if the shutter-release button is not pressed, the  
shutter is released automatically if the camera detects that the face framed by the  
double border is smiling (Smile timer) (A49).  
1/125 F2.7  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Shooting Options: The Shooting Menu  
B Notes on Face priority  
In Face priority, if the shutter-release button is pressed halfway when no faces are recognized, AF  
area mode will be set to Auto.  
If no face is detected when the shutter-release button is pressed halfway in Portrait or Night  
portrait scene mode, or Smart portrait mode, the camera will focus on the subject in the center  
focus area.  
Depending on shooting conditions, such as whether or not the subject is facing the camera, faces  
may not be detected.  
The camera may be unable to detect faces in the following situations:  
- When faces are partially hidden by sunglasses or other obstructions  
- When faces take up too much or too little of the frame  
When there are multiple people in the frame, the face on which the camera focuses depends on a  
variety of shooting conditions, such as whether or not the subject is facing the camera.  
In some rare cases, the subject may not be in focus despite the fact that the double border glows  
green (A25). Should this occur, switch to A(auto) mode and set AF area mode to Manual or  
Center, refocus on another subject positioned at the same distance from the camera as the actual  
portrait subject, and use focus lock (A102).  
Images that were taken using face priority will be rotated and displayed automatically according  
to the orientation of the faces detected, in full-frame and thumbnail playback modes (excluding  
pictures that were shot using Continuous, BSS and Multi-shot 16 (A98)).  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shooting Options: The Shooting Menu  
Functions that Cannot Be Applied Simultaneously  
Certain settings in the shooting menu cannot be used with other functions.  
Restricted Functions  
Flash mode  
Setting  
Description  
If set to Continuous, BSS, or Multi-  
shot 16, the flash cannot be used.  
Continuous (A98)  
When using Multi-shot 16, Image  
Image mode  
Continuous  
Continuous (A98)  
mode is fixed at L Normal (2592).  
When using the self-timer, the setting is  
fixed at Single.  
Self-timer (A30)  
When using Multi-shot 16, ISO  
sensitivity is set automatically  
according to the brightness.  
ISO sensitivity  
Electronic VR  
White balance  
Continuous (A98)  
When ISO sensitivity is set to any  
setting other than Auto, Electronic VR  
does not function.  
ISO Sensitivity (A99)  
When using Black-and-white, Sepia,  
Color options (A100) or Cyanotype, the White balance  
setting is fixed at Auto.  
When Multi-shot 16 is selected,  
Motion detection is not enabled.  
Continuous (A98)  
Motion detection  
Blink warning  
When the option other than Auto is  
ISO sensitivity (A99)  
selected for ISO sensitivity, Motion  
detection is disabled.  
If set to Continuous, BSS, or Multi-  
shot 16, blink warning cannot be used.  
Continuous (A98)  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Playback Options: The Playback Menu  
The following options are available in playback mode.  
k
I
e
a
b
Quick retouch  
Easily create retouched copies in which contrast and saturation have been enhanced.  
D-Lighting  
Enhances brightness and contrast in dark portions of pictures.  
Skin softening  
Make the subject’s skin appear smoother.  
Print set  
Select pictures to print and the number of copies for each.  
Slide show  
View pictures stored in the internal memory or on a memory card in an  
automatic slide show.  
c
Delete  
Delete all or selected pictures.  
Protect  
d
f
g
E
Protect selected pictures from accidental deletion.  
Rotate image  
Change the orientation of pictures.  
Small picture  
Create a small copy of the current picture.  
Voice memo  
Record voice memos for pictures after they are taken.  
Copy  
h
Copy files between memory card and internal memory.  
Displaying the Playback Menu  
Enter the playback mode by pressing the cbutton (A26).  
Press the dbutton to display the playback menu.  
15/11/2009 15:30  
0004.JPG  
Playback menu  
Quick retouch  
D-Lighting  
Skin softening  
Print set  
Slide show  
Exit  
4
4
Use the multi selector to choose and apply settings (A9).  
To exit the playback menu, press the dbutton.  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Playback Options: The Playback Menu  
Selecting Pictures  
The picture selection screen, as shown at right, will be  
displayed with the following menus:  
Erase selected images  
Playback menu: Print set>Select images  
Delete>Erase selected images  
Back  
Protect (A109)  
Rotate image (A110)  
Copy>Selected images (A110)  
Setup menu:  
Welcome screen (A115)  
Follow the procedures described below to choose the pictures.  
1
Press the multi selector Jor Kto choose the  
desired picture.  
Erase selected images  
Only one picture can be selected for Rotate image  
and Welcome screen. Proceed to step 3.  
Rotate the zoom control to g(i) to switch to full-frame  
playback. Rotate the zoom control to f(h) to switch  
back to 12-thumbnail display.  
Back  
2
3
Press Hor Ito select ON or OFF (or the  
Erase selected images  
number of copies).  
When ON is selected, a check mark (y) is displayed in  
the top left corner of the current picture. Repeat steps 1  
and 2 to select additional pictures.  
Back  
Press the kbutton to apply picture selection.  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playback Options: The Playback Menu  
b Slide Show  
Press the cbutton (Playback mode) Md(Playback menu) Mb Slide show  
View pictures stored in the internal memory or on a memory card in an automatic  
slide show.  
1
Use the multi selector to choose Start and  
press the kbutton.  
Slide show  
Pause  
To change the interval between pictures, choose  
Frame intvl, select the desired interval time, and press  
the kbutton before choosing Start.  
Start  
Frame intvl  
Loop  
To repeat the slide show automatically, enable Loop  
and press the kbutton before choosing Start. The  
Exit  
check mark (w) will be added to the loop option when enabled.  
2
3
The slide show begins.  
While the slide show is in progress, the following  
operations are available:  
Press the multi selector Kto display the subsequent  
picture or Jto display the previous picture. Hold  
down either button to fast forward or rewind.  
Press the kbutton to pause the slide show.  
Choose End or Restart.  
Pause  
When the slide show ends or is paused, choose End  
and press the kbutton to return to the playback  
menu, or choose Restart to play the slide show again.  
Restart  
End  
Frame intvl  
B Notes on Slide Show  
Only the first frame of movies (A78) included in slide shows is displayed.  
Even if Loop is selected, the maximum playback duration for a slide show is 30 minutes (A124).  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Playback Options: The Playback Menu  
c Delete  
Press the cbutton (Playback mode) Md(Playback menu) Mc Delete  
Delete selected pictures or all pictures.  
Erase selected images  
Delete selected pictures (See “Selecting Pictures” (A107) for more information).  
Erase all images  
Delete all pictures.  
B Notes on Deletion  
Once deleted, pictures cannot be recovered. Transfer important images to a computer before  
deletion.  
Pictures marked with the s icon are protected and cannot be deleted.  
d Protect  
Press the cbutton (Playback mode) Md(Playback menu) Md Protect  
Protect selected pictures from accidental deletion.  
Choose pictures in the picture selection screen to apply the protect option  
Note, however, that formatting the camera’s internal memory or the memory card  
will permanently erase protected files (A125).  
Protected pictures are recognized by the s icon (A7, 50).  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Playback Options: The Playback Menu  
f Rotate Image  
Press the cbutton (Playback mode) Md(Playback menu) Mf Rotate image  
After shooting, set the orientation in which pictures are displayed during playback.  
Pictures can be rotated 90° clockwise or counterclockwise.  
Pictures that were recorded in the portrait (vertical) orientation can be rotated up  
to 180° in either direction.  
Select a picture in the picture selection screen (A107), and press the kbutton  
to display the Rotate image screen. Press the multi selector Jor Kto rotate the  
picture 90°.  
Rotate image  
Rotate image  
Rotate image  
Back  
Rotate  
Back  
Rotate  
Back  
Rotate  
Rotate 90°  
Rotate 90° clockwise  
counterclockwise  
Press the kbutton to set the orientation displayed, and save the orientation data  
with the picture.  
h Copy  
Press the cbutton (Playback mode) Md(Playback menu) Mh Copy  
Copy pictures between the internal memory and a memory card.  
1
Select an option from the copy screen using  
the multi selector and press the kbutton.  
Copy  
q: Copy pictures from internal memory to  
memory card.  
r: Copy pictures from memory card to internal  
memory.  
Exit  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Playback Options: The Playback Menu  
2
Select a copy option and press the kbutton.  
Camera to card  
Selected images: Copy pictures selected from the  
Selected images  
All images  
picture selection screen (A107).  
All images:  
Copy all pictures.  
Exit  
B Notes on Copying Pictures  
JPEG-, AVI-, and WAV-format images can be copied. Images recorded in any other formats cannot  
be copied.  
If voice memos (A66) are attached to pictures selected for copying, voice memos are copied  
with the pictures.  
Pictures taken with another make of camera or that have been modified on a computer cannot be  
copied.  
When copying pictures for which Print set (A90) options are enabled, the print set settings will  
not be copied. However, when copying pictures for which Protect (A109) is enabled, the  
protect setting will be copied.  
Pictures copied from the internal memory or a memory card cannot be displayed in auto sort  
mode (A56).  
Even if a picture added to favorites folder (A61) is copied, the contents of the favorites folder will  
not be copied.  
C Memory contains no images. Message  
If there are no pictures stored on the memory card when playback mode is applied, the message  
Memory contains no images. will be displayed. Press the dbutton to display the copy option  
screen, and copy the pictures stored in the camera’s internal memory to the memory card.  
D More Information  
See “File and Folder Names” (A132) for more information.  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Camera Setup: The Setup Menu  
The setup menu contains the following options.  
a
c
d
e
Menus  
Choose how menus are displayed.  
Welcome screen  
Select screen displayed when the camera is turned on.  
Date  
Set the camera clock and choose home and destination time zones.  
Monitor settings  
Choose whether or not to display information in the monitor, whether or not  
pictures are shown on the display for review after taking them, and set the  
monitor brightness.  
f
w
U
Date imprint  
Imprint date on pictures.  
Electronic VR  
Specify the electronic vibration reduction setting for taking still pictures.  
Motion detection  
Adjust the motion detection setting to reduce the effects of subject movement  
and camera shake when taking still pictures.  
h
u
i
k
AF assist  
Enable or disable AF-assist illumination.  
Digital zoom  
Adjust settings for using digital zoom.  
Sound settings  
Adjust sound settings.  
Auto off  
Set the time before the camera enters standby mode to save power.  
l/m Format memory/Format card  
Format internal memory or memory card.  
n
Language  
Choose the language used for camera monitor display.  
Video mode  
o
d
Adjust settings necessary for connection to television.  
Blink warning  
Choose whether or not to detect blinking human subjects when shooting  
pictures using face priority.  
p
Reset all  
Restore camera settings to default values.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
112  
   
Basic Camera Setup: The Setup Menu  
r
Firmware version  
Display camera firmware version.  
Displaying the Setup Menu  
Choose ztab in the menu screen.  
1
Press the dbutton to display the menu  
screen.  
When using A(auto) mode, smart portrait mode,  
playback mode, and movie mode  
Shooting menu  
Image mode  
White balance  
Continuous  
ISO sensitivity  
Color options  
Exit  
When using scene mode  
Image mode  
High (4000  
)
Normal (4000)  
Normal (3264)  
Normal (2592)  
Normal (2048)  
Exit  
2
3
Press the multi selector J.  
Shooting menu  
For information on using the multi selector, see “The  
Image mode  
White balance  
Continuous  
ISO sensitivity  
Color options  
Tab will be selectable.  
Exit  
Press Hor Ito select the ztab.  
Set up  
Menus  
Welcome screen  
Date  
Monitor settings  
Date imprint  
Exit  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Camera Setup: The Setup Menu  
4
Press Kor the kbutton.  
Set up  
Menus  
The setup menu items are selectable.  
Welcome screen  
Date  
Monitor settings  
Date imprint  
Exit  
Use the multi selector to choose and apply settings  
To exit the setup menu, press the dbutton or Jto  
select other tabs.  
a Menus  
Press the dbutton Mz(Setup menu) (A113) Ma Menus  
Choose how menus are displayed.  
Text (default setting)  
Menus are displayed in list format.  
Set up  
Menus  
Welcome screen  
Date  
Monitor settings  
Date imprint  
Exit  
Icons  
All menu items can be displayed in a single page.  
Menu names  
Menus  
Exit  
114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Camera Setup: The Setup Menu  
c Welcome Screen  
Press the dbutton Mz(Setup menu) (A113) Mc Welcome screen  
You can select the welcome screen to be displayed when the camera is turned on.  
None (default setting)  
No welcome screen will be displayed.  
COOLPIX  
Displays a welcome screen.  
Select an image  
Select a picture in the internal memory or on the memory card for the welcome  
screen. Choose a picture in the picture selection screen (A107) and press the k  
button.  
As the selected image is stored in the camera, the image will appear in the welcome  
screen even if the original picture is deleted.  
Pictures taken at an Image mode setting of 16:9 (A94), and copies created at  
a size of 320 × 240 or smaller using the small picture (A73) or crop (A74)  
function, cannot be used.  
115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Camera Setup: The Setup Menu  
d Date  
Press the dbutton Mz(Setup menu) (A113) Md Date  
Set the camera’s internal clock.  
Date  
Set the camera clock to the current date and time.  
Use the multi selector to set the date and time.  
Highlight an item (day, month, year, hour, minute, and the order in which day,  
month, and year are displayed): Press Jor K.  
Edit the highlighted item: Press Hor I.  
Finish setting: After selecting the order in which the day, month, and year are  
displayed, press the kbutton (A17).  
Time zone  
w (home time zone) can be specified and daylight saving enabled or disabled from  
Time zone options. When x (travel destination) is selected, the time difference  
(A118) is automatically calculated and the date and time in the selected region  
are recorded. Useful when travelling.  
Setting Travel Destination Time Zone  
1
Use the multi selector to choose Time zone  
and press the kbutton.  
Date  
1
5
/
1
1
/
2
0
0
9
1
5
:
3
0
The Time zone menu is displayed.  
Date  
Time zone  
Exit  
2
Choose x Travel destination and press the  
Time zone  
kbutton.  
1
5
/
1
1
/
2
0
0
9
1
5
:
3
0
London, Casablanca  
The date and time displayed on the monitor change  
according to the region currently selected.  
Home time zone  
Travel destination  
Exit  
116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Basic Camera Setup: The Setup Menu  
3
4
Press K.  
Time zone  
The time zone selection screen is displayed.  
1
5
/
1
1
/
2
0
0
9
1
5
:
3
0
London, Casablanca  
Home time zone  
Travel destination  
Exit  
Press Jor Kto choose the travel destination  
region (time zone).  
1 1 : 3 0  
EDT:  
-
0 4 : 0 0  
New York  
Toronto  
Lima  
If the daylight saving time is in effect, press Hto turn  
on the daylight saving time option. When the option is  
enabled, W is displayed at the top of the monitor, and  
the time is advanced one hour. To turn off the daylight  
saving time option, press I.  
Back  
Press the kbutton to choose the travel destination time zone.  
While the travel destination time zone is selected, the Z icon will be displayed in the  
monitor when the camera is in shooting mode.  
B The Clock Battery  
The camera’s internal clock uses a backup battery that is independent from the camera’s battery. The  
clock battery charges when the main battery is installed or an AC adapter is connected, and can  
provide several days of backup power after about ten hours of charging.  
C w (Home Time Zone)  
To switch to the home time zone, choose w Home time zone in step 2 and press the kbutton.  
To change the home time zone, choose w Home time zone in step 2 and perform steps 3 and 4,  
to set the home time zone.  
C Daylight Saving Time  
When daylight saving time starts or ends, turn the daylight saving time option on or off from the  
time zone selection screen displayed in step 4.  
D Imprinting the Date on Pictures  
After setting the date and time, set the Date imprint setting in the setup menu (A120). Once  
Date imprint is set, the shooting date and time can be imprinted on the image data when taking  
pictures.  
117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Camera Setup: The Setup Menu  
D Time Zones  
The camera supports the time zones listed below. For time differences not listed below, set the  
camera clock to local time.  
UTC +/–  
Location  
UTC +/–  
Location  
–11 Midway, Samoa  
+1 Madrid, Paris, Berlin  
–10 Hawaii, Tahiti  
+2 Athens, Helsinki, Ankara  
Moscow, Nairobi, Riyadh,  
Kuwait, Manama  
–9 Alaska, Anchorage  
+3  
PST (PDT): Los Angeles, Seattle,  
Vancouver  
–8  
+4 Abu Dhabi, Dubai  
+5 Islamabad, Karachi  
+5.5 New Delhi  
–7 MST (MDT): Denver, Phoenix  
CST (CDT): Chicago, Houston,  
Mexico City  
–6  
EST (EDT): New York, Toronto,  
Lima  
–5  
+6 Colombo, Dhaka  
–4 Caracas, Manaus  
–3 Buenos Aires, Sao Paulo  
–2 Fernando de Noronha  
–1 Azores  
+7 Bangkok, Jakarta  
+8 Beijing, Hong Kong, Singapore  
+9 Tokyo, Seoul  
+10 Sydney, Guam  
0
London, Casablanca  
+11 New Caledonia  
+12 Auckland, Fiji  
118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Camera Setup: The Setup Menu  
e Monitor Settings  
Press the dbutton Mz(Setup menu) (A113) Me Monitor settings  
The following settings are available.  
Photo info  
Choose information displayed in the monitor during shooting and playback mode.  
Image review  
On (default setting): Picture is automatically displayed in the monitor  
immediately after it is taken and the monitor display returns to shooting mode.  
Off: Picture is not displayed after it is taken.  
Brightness  
Choose from five settings for monitor brightness. The default setting is 3.  
Photo Info  
The following display options are available.  
Shooting mode  
Playback mode  
15/11/2009 15:30  
0004.JPG  
Show info  
Auto info  
11  
4
4
The current settings or operation guide is displayed for a few seconds, as in  
(default setting) Show info above. After a few seconds, display will be the same as Hide info  
.
Hide info  
15/11/2009 15:30  
0004.JPG  
Framing grid +  
Auto info  
11  
4
4
In  
A(auto) mode, a framing grid is displayed to help The current settings or  
frame pictures; other current settings or operation  
guide is displayed for a few seconds, as in Auto info  
above. In other shooting modes, the current settings  
or operation guide is displayed, as in Auto info above.  
operation guide is displayed,  
as in Auto info above.  
119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Basic Camera Setup: The Setup Menu  
f Date Imprint  
Press the dbutton Mz(Setup menu) (A113) Mf Date imprint  
The shooting date and time can be imprinted in  
pictures at the time of shooting. This information can  
be printed even from printers that do not support  
printing of date and time (A92).  
15.11.2009  
Off (default setting)  
Date and time are not imprinted on pictures.  
Date  
The date is imprinted in pictures.  
Date and time  
The date and time are imprinted in pictures.  
At settings other than Off, the icon for the current setting is displayed in the  
monitor (A6).  
B Date Imprint  
Imprinted dates form a permanent part of image data and cannot be deleted. Date cannot be  
imprinted on pictures after they are taken.  
Dates imprinted at an Image mode setting (A94) of TV screen (640) may be difficult to read.  
Choose PC screen (1024) or larger when using date imprint.  
The date is recorded using the format selected in the setup menu’s Date item (A16, 116).  
The date is not imprinted in the following situations:  
- When using the Panorama assist scene mode  
- Movie mode  
C Date Imprint and Print Set  
When printing from DPOF-compatible printers which support printing of shooting date and photo  
information, the date and information can be printed on pictures without date and time imprinted  
on them, using options in the Print set menu (A90).  
120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Camera Setup: The Setup Menu  
w Electronic VR  
Press the dbutton Mz(Setup menu) (A113) Mw Electronic VR  
Choose whether to use electronic VR (vibration reduction) when taking still  
pictures.  
Auto  
When all of the following conditions are met while taking still pictures, electronic VR  
is applied and the effects of camera shake are reduced.  
The flash is turned off or set to slow sync mode.  
The shutter speed is slow.  
The Continuous setting is set to Single.  
When the subject is dark.  
Off (default setting)  
Electronic VR is disabled.  
When Auto is selected, R appears on the monitor (A6), and electronic VR is  
applied depending on shooting conditions.  
B Notes on Electronic Vibration Reduction  
Electronic VR is disabled while the flash is used, except when using slow sync mode. Note that  
Electronic VR is disabled even when the flash mode is slow sync with red-eye reduction.  
If the exposure period exceeds a certain period of time, Electronic VR will not function.  
Electronic VR does not function when ISO sensitivity is set to any setting other than Auto.  
Electronic VR does not function when using the following scene modes.  
- Sports (A35)  
- Night portrait (A35)  
- Dusk/dawn (A37)  
- Night landscape (A37)  
- Museum (A38)  
- Fireworks show (A39)  
- Backlight (A39)  
The effectiveness of Electronic VR decreases as camera shake increases.  
Pictures taken using motion detection may be somewhat grainy.  
D Electronic VR for Movies  
To compensate for vibration while shooting a movie, go to the movie menu (A76) and enable  
Electronic VR (A77).  
121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Camera Setup: The Setup Menu  
U Motion Detection  
Press the dbutton Mz(Setup menu) (A113) MU Motion detection  
Enable motion detection to reduce the effects of subject movement and camera  
shake when shooting still pictures.  
Auto (default setting)  
When the camera detects the camera shake or subject movement, the shutter  
speed will be increased for reducing the effects of them.  
However, motion detection does not function in the following situations.  
When the flash mode is set to m(fill flash)  
When ISO sensitivity (A99) is set to Fixed range auto or ISO sensitivity is  
fixed at a particular value in A(auto) mode  
When Multi-shot 16 (A98) is enabled  
In the following scene modes: Dusk/dawn (A37) and Fireworks show  
Off  
Motion detection is not enabled.  
The motion detection setting can be confirmed in the monitor while shooting  
(A6, 21).  
The motion detection icon will glow green when the camera detects any vibration  
and increases the shutter speed. When Off is selected, the icon for the current  
setting is not displayed.  
B Notes on Motion Detection  
Motion detection may be unable to completely eliminate the effects of the subject movement  
and camera shake in some situations.  
Motion detection may not function if the subject exhibits significant movement or is too dark.  
Pictures taken using motion detection may be somewhat grainy.  
122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Camera Setup: The Setup Menu  
h AF Assist  
Press the dbutton Mz(Setup menu) (A113) Mh AF assist  
Enable or disable AF-assist illumination.  
Auto (default setting)  
AF-assist illumination will be used to assist the focus operation when the subject is  
poorly lit. The illuminator has a range of about 1.9 m (6 ft. 3 in.) at the maximum  
wide-angle position and about 1.1 m (3 ft. 7 in.) at the maximum telephoto  
position. However, note that for some scene modes, AF-assist illumination turns  
off automatically (A34 to 40) even if Auto is set.  
Off  
Disable this function. The camera may be unable to focus if lighting is poor.  
u Digital Zoom  
Press the dbutton Mz(Setup menu) (A113) Mu Digital zoom  
Adjust settings for using digital zoom.  
On (default setting)  
When the camera is zoomed in to the maximum optical zoom position, rotating the  
zoom control to g(i) triggers digital zoom (A23).  
Off  
Digital zoom will not be activated (except when shooting a movie).  
B Notes on Digital Zoom  
When digital zoom is in effect, AF area mode is set to Center (A101).  
Digital zoom cannot be used in the following situations.  
- When Scene auto selector, Portrait, or Night portrait is selected in scene mode  
- When smart portrait mode is selected  
- When Multi-shot 16 (A98) is selected  
- Just before recording a movie (Up to 2× zoom can be activated while recording movies)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
123  
       
Basic Camera Setup: The Setup Menu  
i Sound Settings  
Press the dbutton Mz(Setup menu) (A113) Mi Sound settings  
Adjust the following sound settings.  
Button sound  
Turn button sound On or Off.  
When On (default setting) is selected, a beep will sound once when operations are  
completed successfully, twice when focus has been locked, and three times when  
an error is detected. Start-up sound will also play when the camera is turned on.  
Shutter sound  
Choose shutter sound from On (default setting) or Off.  
k Auto Off  
Press the dbutton Mz(Setup menu) (A113) Mk Auto off  
When the camera is on and a period of time passes without any operations having  
been performed, the camera will enter standby mode (A15) to save power.  
Once the camera has entered standby mode, the power-on lamp will blink, and if  
no operations are performed for another three minutes, the camera will turn off.  
Choose the time allowed to elapse before the camera enters standby mode if no  
operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.  
C Canceling Standby Mode  
Cancel standby mode and reactivate the monitor by pressing any of the following buttons.  
the power switch  
the shutter-release button  
the Abutton  
the cbutton  
C Note on Auto Off  
Regardless of the option selected, the monitor will remain on for three minutes when menus are  
displayed, a maximum of 30 minutes during slide show playback, and 30 minutes when the AC  
adapter is connected.  
124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Basic Camera Setup: The Setup Menu  
l Format Memory/m Format Card  
Press the  
d
button Mz(Setup menu) (  
113) Ml Format memory/  
m
Format card  
Use this option to format the internal memory or a memory card.  
Formatting the Internal Memory  
To format the internal memory, remove the memory  
card from the camera.  
The Format memory option appears in the setup  
Format memory  
All images will  
be deleted! OK?  
menu.  
No  
Format  
Exit  
Formatting a Memory Card  
When the memory card is inserted in the camera, the  
Format card option appears in the setup menu.  
Format card  
All images will  
be deleted! OK?  
No  
Format  
Exit  
B Formatting Internal Memory and Memory Cards  
Formatting the internal memory or memory cards permanently deletes all data. Be sure to transfer  
important pictures to a computer before formatting.  
Formatting the internal memory or memory card restores favorites folder icon settings (A60) to  
the default setting (displayed as number).  
Do not turn the camera off, or open the battery-chamber/memory card slot cover during  
formatting.  
The first time you insert the memory cards used in other devices into the COOLPIX S570, be sure to  
format them using this camera.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
125  
   
Basic Camera Setup: The Setup Menu  
n Language  
Press the dbutton Mz(Setup menu) (A113) Mn Language  
Choose one of 24 languages for display of camera menus and messages.  
Czech  
Polish  
Danish  
Portuguese  
Russian  
German  
(default setting)  
Spanish  
Greek  
Finnish  
Swedish  
Turkish  
French  
Simplified Chinese  
Traditional Chinese  
Japanese  
Korean  
Indonesian  
Italian  
Hungarian  
Dutch  
Thai  
Norwegian  
Arabic  
o Video Mode  
Press the dbutton Mz(Setup menu) (A113) Mo Video mode  
Adjust settings for connection to a television. Choose from NTSC and PAL.  
d Blink Warning  
Press the dbutton Mz(Setup menu) (A113) Md Blink warning  
Choose whether or not blinking eyes are detected when using face priority  
(A103) in the following shooting modes.  
A(auto) mode (when AF area mode is set to Face priority (A101))  
When scene mode is set to Scene auto selector (A34), Portrait (A34), or  
Night portrait (A35)  
126  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Basic Camera Setup: The Setup Menu  
On  
When the camera detects that one or more human subjects may have closed eyes  
shortly after recognizing the faces and shooting them, the blink warning screen will  
appear in the monitor.  
The face of a portrait subject, whose eyes may have been closed when the shutter  
was released, is framed by a yellow border. Should this occur, check the picture and  
decide whether or not another picture should be taken.  
Off (default setting)  
Blink warning is not enabled.  
B Note on Blink warning  
When continuous is set to Continuous, BSS, or Multi-shot 16, blink warning does not function.  
Operating the Blink Warning Screen  
The following operations can be performed when the  
Did someone blink? screen is displayed.  
Did someone blink?  
If no operations are performed for a few seconds, the  
camera automatically returns to shooting mode.  
Exit  
Option  
Use  
Description  
Enlarge and display  
the detected face  
g (i)  
Rotate the zoom control to g (i).  
Switch to full-frame  
playback  
f(h)  
Rotate the zoom control to f(h).  
If the camera detects more than one human  
subjects with their eyes closed, press H, I, J, or K  
during the enlarged display to switch over the faces.  
Select the face to  
display  
Delete the picture  
l
Press the l button.  
k
Switch to shooting  
mode  
Press the kbutton or the shutter-release button.  
127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Camera Setup: The Setup Menu  
p Reset All  
Press the dbutton Mz(Setup menu) (A113) Mp Reset all  
When Reset is selected, the camera’s settings will be restored to their default  
values.  
Pop-up Menu  
Option  
Flash mode (A28)  
Default value  
Auto  
Off  
Self-timer (A30)  
Macro mode (A31)  
Off  
Exposure compensation (A32)  
0.0  
Scene Mode  
Option  
Default value  
Scene mode setting in the shooting-mode  
Scene auto selector  
Center  
selection menu (A33)  
White balance in Food mode (A43)  
Smart portrait Menu  
Option  
Skin softening (A48)  
Smile timer (A49)  
Blink proof (A49)  
Default value  
Normal  
On  
Off  
Movie Menu  
Option  
Default value  
Movie options (A76)  
Autofocus mode (A77)  
Electronic VR (A77)  
TV movie 640P  
Single AF  
Off  
128  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Camera Setup: The Setup Menu  
Shooting Menu  
Option  
Default value  
I Normal (4000)  
Auto  
Image mode (A94)  
White balance (A96)  
Continuous (A98)  
Single  
ISO sensitivity (A99)  
Color options (A100)  
AF area mode (A101)  
Auto  
Standard color  
Face priority  
Setup Menu  
Option  
Default value  
Menus (A114)  
Text  
None  
Auto info  
On  
Welcome screen (A115)  
Photo info (A119)  
Image review (A119)  
Brightness (A119)  
Date imprint (A120)  
Electronic VR (A121)  
Motion detection (A122)  
AF Assist (A123)  
3
Off  
Off  
Auto  
Auto  
On  
Digital zoom (A123)  
Button sound (A124)  
Shutter sound (A124)  
Auto off (A124)  
On  
On  
1 min  
Off  
Blink warning (A126)  
129  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Camera Setup: The Setup Menu  
Others  
Option  
Default value  
Paper size (A86, 87)  
Slide show (A108)  
Default  
3 s  
Choosing Reset all also clears the current file number (A132) from the  
memory. Numbering will continue from the lowest number available. To reset  
file numbering to “0001”, delete all pictures (A109) before selecting Reset all.  
The following menu settings will remain unaffected when menus are reset with  
Reset all.  
Shooting menu: Preset manual data (A97) acquired for White balance  
Setup menu: Picture selected for Welcome screen (A115), Date (A116),  
Language (A126), and Video mode (A126)  
r Firmware Version  
Press the dbutton Mz(Setup menu) (A113) Mr Firmware version  
View the current camera firmware version.  
COOLPIX S570 Ver.x.x  
Back  
130  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Technical Notes  
Optional Accessories  
Rechargeable battery  
Battery charger  
Rechargeable Li-ion Battery EN-EL10  
Battery Charger MH-63  
AC Adapter EH-62D  
<How to attach EH-62D>  
1
2
3
AC adapter  
Check that the AC adapter cord has been inserted correctly  
into the battery chamber before closing the battery-  
chamber/memory card slot cover. If part of the cord has not  
been inserted into the chamber the cover may be damaged  
during closure.  
USB cable  
AV cable  
USB Cable UC-E6  
Audio Video Cable EG-CP14  
Approved Memory Cards  
The following Secure Digital (SD) memory cards have been tested and approved  
for use in this camera.  
All cards of the designated make and capacity can be used, regardless of speed.  
1
2
2
2
2
2
SanDisk  
TOSHIBA  
Panasonic  
Lexar  
512 MB, 1 GB, 2 GB , 4 GB , 8 GB , 16 GB  
1
2
2
512 MB, 1 GB, 2 GB , 4 GB , 8 GB , 16 GB  
1
2
2
512 MB, 1 GB, 2 GB , 4 GB , 8 GB , 16 GB  
1
2
2
1 GB, 2 GB , 4 GB , 8 GB  
1
2
If the memory card will be used with a card reader or similar device, check that the device  
supports 2 GB cards.  
SDHC compliant.  
If the memory card will be used with a card reader or similar device, check that  
device supports SDHC.  
Operation is not guaranteed with other makes of card. Contact the manufacturer  
for details on the above cards.  
131  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
File and Folder Names  
Pictures, movies, and voice memos are assigned file names as follows.  
DSCN0001.JPG  
Identifier (not shown on camera monitor)  
Original still pictures (voice  
memo attachment  
included), movies  
Extension (signifies the file type)  
Still pictures  
Movies  
.JPG  
.AVI  
DSCN  
Voice memos  
.WAV  
Small copies (voice memo  
attachment included)  
SSCN  
RSCN  
Cropped copies (voice  
memo attachment included)  
File number (assigned automatically in  
ascending order, starting with “0001”)  
Quick Retouch, D-Lighting,  
and Skin softening copies  
(voice memo attachment  
included)  
FSCN  
Files are stored in folders named with a folder number followed by a five-  
character identifier: “P_” plus a three-digit sequence number for pictures shot  
using Panorama assist (e.g. “101P_001”; A45), and “NIKON” for all other  
pictures (e.g. “100NIKON”). When the number of files within a folder reaches  
9999, a new folder will be created. File numbers will be assigned automatically  
starting with “0001”.  
Voice memo file names have the same identifier and file number as the picture  
to which the voice memo is attached.  
Files copied using Copy > Selected images is copied to the current folder,  
where they are assigned new file numbers in ascending order starting from the  
largest file number in memory. Copy > All images copies all folders from the  
source medium; file names do not change but new folder numbers are  
assigned in ascending order, starting from the largest folder number on the  
destination medium (A110).  
A single folder can hold up to 200 pictures; if the current folder already contains  
200 pictures, a new folder, named by adding one to the current folder name,  
will be created the next time a picture is taken. If the current folder is numbered  
999 and contains 200 pictures, or a picture is numbered 9999, no further  
pictures can be taken until the internal memory or memory card is formatted  
(A125), or a new memory card is inserted.  
132  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Caring for the Camera  
To ensure continued enjoyment of this Nikon product, observe the following  
precautions when using or storing the device.  
B Keep dry  
The device will be damaged if immersed in water or subjected to high humidity.  
B Do not drop  
The product may malfunction if subjected to strong shock or vibration.  
B Handle the lens and all moving parts with care  
Do not apply force to the lens, lens cover, monitor, memory card slot or battery chamber. These  
parts are easily damaged. Applying force to the lens cover could result in camera malfunction or  
damage to the lens. Should the monitor break, care should be taken to avoid injury caused by  
broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes  
or mouth.  
B Do not point the lens at strong light sources for extended periods  
Avoid pointing the lens at the sun or other strong light sources for extended periods when using or  
storing the camera. Intense light may cause deterioration of the CCD image sensor, producing a  
white blur effect in photographs.  
B Keep away from strong magnetic fields  
Do not use or store this device in the vicinity of equipment that generates strong electromagnetic  
radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment  
such as radio transmitters could interfere with the monitor, damage data stored on the memory  
card, or affect the product’s internal circuitry.  
B Avoid sudden changes in temperature  
Sudden changes in temperature, such as when entering or leaving a heated building on a cold day,  
can cause condensation to form inside the device. To prevent condensation, place the device in a  
carrying case or a plastic bag before exposing it to sudden changes in temperature.  
B Turn the product off before removing or disconnecting the power source  
Do not remove the battery while the product is on, or while images are being recorded or deleted.  
Forcibly cutting power in these circumstances could result in loss of data or in damage to product  
memory or internal circuitry.  
133  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Caring for the Camera  
C The Battery  
Check the battery level when taking the camera out, and charge the battery if necessary. Do not  
continue charging once the battery is fully charged, as this will result in reduced battery  
performance. If possible, carry a fully-charged spare battery when taking pictures on important  
occasions.  
Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F). Failure  
to observe this precaution could damage the battery or impair its performance.  
Charge indoors at an ambient temperature between 5 and 35 °C (41 to 95 °F). When the battery  
temperature is between 0 and 10 °C (32 to 50 °F) or 45 to 60 °C (113 to 140 °F), the chargeable  
capacity may decrease. The battery will not charge if its temperature is below 0 °C (32 °F) or above  
60 °C (140 °F).  
If an exhausted battery is used at a low temperature, the camera may not turn on. Be sure that the  
battery is fully charged and spare batteries are prepared before heading outside to take pictures in  
cold weather. Keep spare batteries in a warm place and exchange as necessary. Once warmed, a  
cold battery that could not be used temporarily due to lowered performance may recover some of  
its charge.  
Should the battery terminals become dirty, the camera may not turn on due to poor contact. Wipe  
the terminals off with a clean, dry cloth before use.  
If the battery will not be used for some time, insert it in the camera and run it flat before removing  
it for storage. Attach the included terminal cover to the battery and store it in a cool location with  
an ambient temperature of 15 to 25 °C (59 to 77 °F). Do not store the battery in hot or extremely  
cold locations.  
While the battery is in storage, charge it at least once every six months and then use the camera to  
run it flat again before storing it in a cool location.  
Always remove the battery from the camera or battery charger when it is not being used. Left  
installed, minute amounts of current flow even when unused, and the battery may become  
excessively drained and no longer function.  
A marked drop in the time a fully-charged battery retains its charge, when used at room  
temperature, indicates that the battery needs to be replaced. Purchase a new battery.  
Replace the battery when it no longer holds a charge. Used batteries are a valuable resource.  
Please recycle used batteries in accordance with local regulations.  
134  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Caring for the Camera  
Cleaning  
Avoid touching glass parts with your fingers. Remove dust or lint with a blower  
(typically a small device with a rubber bulb attached to one end that is  
pumped to produce a stream of air out the other end). To remove fingerprints  
or other stains that cannot be removed with a blower, wipe the lens with a soft  
cloth, using a spiral motion that starts at the center of the lens and working  
toward the edges. If this fails, clean the lens using a cloth lightly dampened  
with commercial lens cleaner.  
Lens  
Remove dust or lint with a blower. To remove fingerprints and other stains,  
clean the monitor with a soft, dry cloth, being careful not to apply pressure.  
Monitor  
Body  
Use a blower to remove dust, dirt or sand, then wipe gently with a soft, dry  
cloth. After using the camera at the beach or seaside, wipe off any sand or salt  
with a dry cloth lightly dampened with fresh water, then dry thoroughly. Note  
that foreign matter inside the camera could cause damage not covered by the  
warranty.  
Do not use alcohol, thinner, or other volatile chemicals.  
135  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Caring for the Camera  
Storage  
Turn the camera off when not in use. Check that the power-on lamp is off before  
putting the camera away. Remove the battery if the camera will not be used for an  
extended period. Do not store the camera with naphtha or camphor moth balls, or  
in any of the following locations:  
Next to equipment that produces strong electromagnetic fields, such as  
televisions or radios  
Exposed to temperatures below -10 °C (14 °F) or above 50 °C (122 °F)  
Poorly ventilated or subject to humidities of over 60 %  
To prevent mold or mildew, take the camera out of storage at least once a month.  
Turn the camera on and release the shutter a few times before putting the camera  
away again.  
C Notes on the Monitor  
The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic  
common to all TFT LCD displays, and does not indicate a malfunction. Images recorded using the  
product will not be affected.  
Images in the monitor may be difficult to see under bright lighting.  
The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your  
Nikon-authorized service representative.  
C Notes on Smear  
White or colored streaks of light may be visible in the monitor with framing of bright subjects. This  
phenomenon, known as “smear,” occurs when extremely bright light strikes the image sensor. This is  
due to characteristics of the image sensor and does not indicate a malfunction. Smear may also  
cause partial discoloration in monitor display with shooting.  
Smear does not affect recorded images except when shooting with Continuous set to Multi-shot  
16 and when recording movies. When shooting in these modes, avoiding bright objects such as the  
sun, reflections of the sun, and electric lights is recommended.  
136  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Error Messages  
The following table lists the error messages and other warnings displayed in the  
monitor, as well as the solutions for dealing with them.  
Display  
O (blinks)  
Problem  
Clock not set.  
Solution  
Set clock.  
A
B
Battery running low.  
Prepare to charge or  
change battery.  
N
Battery exhausted.  
Charge or change battery. 12  
Battery exhausted.  
P
Battery temperature is  
high.  
Turn off camera, and allow 15  
battery to cool down  
before resuming use. After  
5 seconds, this message  
will disappear, the monitor  
will turn off, and the  
Battery temperature  
high  
power-on lamp and flash  
lamp will blink rapidly.  
After the lamps blink for  
three minutes, the camera  
will turn off automatically.  
Pressing the power switch  
also turns off the camera.  
Q (blinks red)  
Camera cannot focus.  
Refocus.  
Use focus lock.  
P
Camera cannot perform  
other operations until  
recording is complete.  
Wait until message clears  
from display automatically  
when recording is  
Please wait for the  
camera to finish  
recording.  
complete.  
N
Write-protect switch is in  
Slide write-protect switch  
to “write” position.  
Memory card is write “lock” position.  
protected.  
P
Error accessing memory  
card.  
Use approved card.  
Check that connectors  
are clean.  
This card cannot be  
used.  
Confirm that memory  
card is correctly inserted.  
P
This card cannot be  
read.  
137  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Error Messages  
Display  
Problem  
Solution  
A
P
Memory card has not been All data stored on the  
Card is not formatted. formatted for use in this  
memory card will be  
Format card?  
camera.  
deleted. If there is any data  
on the card that you want  
to keep, select No, and  
backup the data to a  
computer before  
No  
Yes  
formatting the memory  
card. To format the  
memory card, select Yes  
and press the kbutton.  
N
Memory card is full.  
Choose smaller image size. 94  
Delete pictures. 26, 78,  
Insert new memory card. 18  
Out of memory.  
Remove memory card  
and use internal  
memory.  
P
Error occurred while  
recording picture.  
Format internal memory or 125  
memory card.  
Image cannot be  
saved.  
Camera has run out of file Replace the memory card, 132  
numbers.  
or format the internal  
memory/memory card.  
Picture cannot be used for The following pictures  
welcome screen.  
cannot be used.  
Pictures taken at an  
Image mode setting of  
16:9.  
Pictures created using  
the small picture or crop  
functions that are 320 ×  
240 or smaller in size.  
There is insufficient space  
to save a copy.  
Delete pictures from  
destination.  
P
The image file cannot have  
any voice memos attached  
to it.  
Choose an image that  
was taken using this  
camera.  
Sound file cannot be  
saved.  
Voice memos cannot be  
attached onto movies.  
N
Over 200 pictures have  
already been added to  
Remove some pictures  
from favorites folder.  
Add to other favorites  
folders.  
Album is full. No  
further pictures can be favorites folder.  
added.  
138  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Error Messages  
Display  
Problem  
Solution  
A
N
Someone may have had  
Check the picture in  
A blink was detected  
in the picture just  
taken.  
their eyes closed when the playback mode.  
picture was taken.  
N
Cannot edit selected  
picture.  
Confirm the conditions  
that are required for  
editing.  
These options cannot be  
used with movies.  
Image cannot be  
modified.  
N
Time out error while  
Choose memory card with 18  
faster write speed.  
Cannot record movie. recording movie.  
N
No pictures in the internal  
memory or memory card.  
Pictures stored in the  
internal memory can  
only be viewed if no  
memory card is inserted.  
To copy files from  
Memory contains no  
images.  
internal memory to  
memory card, press the  
dbutton to display  
the Copy screen, then  
copy the files from  
internal memory to  
memory card.  
No pictures are contained Select the folder  
in the folder selected in  
auto sort mode.  
containing the sorted  
pictures.  
No pictures can be played Playback pictures using  
back in auto sort mode.  
playback mode, list by  
date, or favorite pictures  
mode.  
The picture has not been  
added to favorites folder.  
Add the picture to  
favorites folder.  
Choose the favorites  
folder that the picture  
has been added.  
N
File not created with this  
File cannot be viewed on  
this camera. View file using  
the computer or any other  
devices which was used to  
create or edit this file.  
File contains no image camera.  
data.  
P
This file cannot be  
played back.  
N
The picture cannot be  
All images are hidden. played back in a slide show.  
139  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Error Messages  
Display  
Problem  
Solution  
A
N
Picture is protected.  
Disable protection.  
This image cannot be  
deleted.  
N
Destination in same time  
Travel destination is in zone as home.  
the current time zone.  
Lens error  
Lens error.  
Turn camera off and then  
on again. If error persists,  
contact retailer or Nikon-  
authorized service  
Q
representative.  
P
USB cable disconnected  
Turn camera off and  
reconnect cable.  
Communications error during data transfer to  
printer.  
System error  
Error has occurred in  
Turn camera off, remove  
Q
camera’s internal circuitry. and reinsert battery, and  
turn camera on. If error  
persists, contact retailer or  
Nikon-authorized service  
representative.  
PR  
Printer error: check  
printer status.  
Printer error.  
Check printer. After solving  
the problem, select  
Resume and press the k  
button to resume  
printing.*  
PR  
Printer error: check  
paper  
Specified size of paper is  
not loaded in printer.  
Load the specified paper,  
select Resume and press  
the kbutton to resume  
printing.*  
PR  
Printer error: paper  
jam  
Paper has jammed in the  
printer.  
Eject the jammed paper,  
select Resume and press  
the kbutton to resume  
printing.*  
PR  
Printer error: out of  
paper  
No paper is loaded in  
printer.  
Load the specified paper,  
select Resume and press  
the kbutton to resume  
printing.*  
PR  
Ink error.  
Check ink, select Resume  
and press the kbutton to  
resume printing.*  
Printer error: check ink  
PR  
Running out of ink or ink  
Replace ink, select Resume  
and press the kbutton to  
resume printing.*  
Printer error: out of ink cartridge is empty.  
140  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Error Messages  
Display  
Problem  
Solution  
A
PR  
Printer error: file  
corrupt  
An error caused by the  
image file has occurred.  
Select Cancel and press  
the kbutton to cancel  
printing.  
* See the documentation provided with your printer for further guidance and information.  
141  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If the camera fails to function as expected, check the list of common problems  
below before consulting your retailer or Nikon-authorized service representative.  
Refer to the page numbers in the right-most column for more information.  
Display, Settings and Power Supply  
Problem  
Cause/Solution  
A
Monitor is blank.  
Camera is off.  
Battery is exhausted.  
The camera is in standby mode. Press the power  
switch, shutter-release button, Abutton, or c  
button.  
When flash lamp blinks red, wait until flash has  
charged.  
Camera and computer are connected via USB cable. 81  
Camera and TV are connected via AV cable.  
Monitor is hard to read.  
Adjust monitor brightness.  
Monitor is dirty. Clean monitor.  
Camera turns off without  
warning.  
Battery is low.  
Camera has turned off automatically to save power. 124  
Battery is cold.  
Date and time of  
recording are not correct.  
Pictures recorded before clock has been set, and  
“Date not set” indicator blinks during shooting, will  
have time stamp of “00/00/0000 00:00”; movies will  
be dated “01/01/2009 00:00”. In calendar display or  
list by date mode, pictures are recognized as having  
been taken on 01/01/2009. Set the correct time and  
date from the Date option in the setup menu.  
Check camera clock regularly against more accurate 116  
timepieces and reset as required.  
No indicators displayed  
in monitor.  
Hide info is selected for Photo info.  
Select Show info.  
Date imprint not  
available.  
Camera clock has not been set.  
Date not appearing on  
pictures even when  
A shooting mode that does not support date imprint is 120  
selected.  
Date imprint is enabled.  
Camera settings reset.  
Backup battery is exhausted; all settings were restored 117  
to their default values.  
142  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Problem  
Cause/Solution  
A
Monitor turns off, and  
Battery temperature is high. Turn off camera, and allow 15  
the power-on lamp and battery to cool down before resuming use. After the  
flash lamp blink rapidly.  
lamps blink for three minutes, the camera will turn off  
automatically. Pressing the power switch also turns off  
the camera.  
Electronically Controlled Cameras  
In extremely rare instances, unusual characters may appear in the monitor and the  
camera may stop functioning. In most cases, this phenomenon is caused by a  
strong external static charge. Turn the camera off, remove and replace the battery,  
then turn the camera on again. In the event of continued malfunction, contact  
your retailer or Nikon-authorized service representative. Note that disconnecting  
the power source as described above may result in the loss of any data not  
recorded to internal memory or the memory card at the time the problem  
occurred. Data already recorded will not be affected.  
143  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Shooting  
Problem  
Cause/Solution  
A
No picture taken when shutter-  
release button is pressed.  
When camera is in playback mode, press the 26  
Abutton or the shutter-release button.  
When menus are displayed, press the d  
button.  
Battery is exhausted.  
When flash lamp blinks, flash is charging.  
Camera cannot focus.  
Pictures are blurred.  
The intended subject is one with which  
autofocus does not perform well.  
Set AF assist in the setup menu to Auto.  
Focus error. Turn camera off and then on  
again.  
Use flash.  
Use electronic vibration reduction or motion 121,  
detection.  
Use BSS.  
Use tripod and self-timer.  
Streaks of light or partial  
discoloration appear in the  
display.  
Smear may occur when the lens is aimed at  
bright subjects. When using the multi-shot 16  
shooting and movie modes, we recommend  
that you avoid shooting when direct sunlight,  
reflected sunlight, or electric lights are in the  
display.  
Bright specks appear in  
pictures taken with flash.  
Flash is reflecting off particles in air. Turn flash  
off.  
Flash does not fire.  
Flash is off.  
Some scene modes that cannot turn on flash 34  
are selected.  
Smart portrait mode selected, with Blink  
proof set to On.  
Dmode is selected.  
Another function that is set now is restricting 105  
the flash.  
Optical zoom cannot be used. Optical zoom cannot be used while recording  
movies.  
144  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Cause/Solution  
A
Digital zoom cannot be used.  
Digital zoom is set to Off in the setup menu.  
Digital zoom is not available in the following  
situations.  
When Scene auto selector, Portrait, or  
Night portrait is selected for scene mode.  
When smart portrait mode is selected.  
Just before recording a movie (up to 2× can  
be applied while recording movies).  
When Multi-shot 16 is selected for the  
Continuous setting.  
Image mode not available.  
Another function that is set now is restricting  
Image mode.  
No sound when shutter is  
released.  
Off is selected for Sound settings>Shutter 124  
sound in setup menu.  
Continuous, Multi-shot 16 or BSS is  
selected for the Continuous setting in  
shooting menu.  
d(Sports scene mode) or l(Museum  
scene mode) is selected.  
Blink proof is set to On for smart portrait  
mode.  
Dmode is selected.  
The speaker is being blocked. Do not cover it. 5, 22  
AF-assist illuminator  
does not light.  
Off is selected for AF assist in the setup  
menu.  
AF-assist illuminator turns off automatically in 34-39  
some scene modes.  
Pictures appear smeared.  
Colors are unnatural.  
Lens is dirty. Clean lens.  
White balance does not match light source.  
Randomly spaced bright pixels Shutter speed too slow or ISO sensitivity is high  
(“noise”) appear in image. as the subject is dark. Noise can be reduced by:  
Using flash.  
Specifying a lower ISO sensitivity setting.  
Using a scene mode which has noise  
reduction ability.  
145  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Cause/Solution  
A
Pictures are too dark  
(underexposed).  
Flash is off.  
Flash window is blocked.  
Subject is beyond flash range.  
Adjust exposure compensation.  
Raise the ISO sensitivity.  
Subject is backlit. Select o(Backlight scene 28, 39  
mode) or use fill flash.  
Pictures are too bright  
(overexposed).  
Adjust exposure compensation.  
Unexpected results when flash If taking pictures with V(auto with red-eye  
set to V(auto with red-eye  
reduction).  
reduction) or fill flash with slow sync and red-  
eye reduction when scene mode is set to Night  
portrait, In-Camera Red-Eye Fix may be applied  
to areas not affected by red-eye. Select any flash  
mode other than V(auto with red-eye  
reduction) and select any shooting mode or  
scene mode other than Night portrait, then try  
shooting again.  
Skin softening results are not as  
expected.  
Skin softening may not produce the desired  
results depending on shooting conditions.  
For pictures with four or more faces, try using 72  
Skin softening in the playback menu.  
Saving images takes time.  
It may take more time to save images in the  
following situations.  
When the noise reduction function is in  
operation.  
When flash is set to V(auto with red-eye  
reduction).  
When using skin softening while shooting.  
146  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Playback  
Problem  
Cause/Solution  
A
File cannot be played back.  
File or folder was overwritten or renamed by  
computer or other make of camera.  
Cannot zoom in on picture.  
Playback zoom cannot be used with movies,  
small pictures, or pictures that have been  
cropped to a size of 320 × 240 or smaller.  
Cannot record or play back  
voice memos.  
Voice memos cannot be appended to movies. 78  
Voice memos cannot be attached to images 67  
taken with other cameras. Voice memos that  
are attached to the image using other  
cameras cannot be played back on this  
camera.  
Cannot use quick retouch,  
D-Lighting, crop, skin  
softening, or small picture  
options.  
These options cannot be used with movies.  
These options cannot be used with pictures  
taken when 16:9 is applied in the Image  
mode setting.  
Select pictures that support quick retouch,  
D-Lighting, crop, skin softening, or small  
picture.  
Camera is unable to edit pictures taken with  
other cameras.  
Other cameras may be unable to play back  
pictures recorded with this camera.  
Pictures not displayed on  
television.  
Choose correct Video mode.  
Memory card contains no pictures. Replace  
the memory card. Remove the memory card  
to play back pictures from the internal  
memory.  
Control settings for favorites  
folder restore to default  
settings, or pictures added to  
favorites are not displayed  
during favorite pictures  
playback.  
Data in the memory card may not be played  
back correctly if overwritten on a computer.  
147  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Cause/Solution  
A
The recorded pictures are not  
displayed in auto sort mode.  
The picture you want to display is sorted in a 56  
folder other than that you are browsing.  
Pictures recorded by another camera, and  
pictures copied using Copy on another  
camera cannot be displayed in the auto sort  
mode.  
Pictures in the internal memory or memory  
card may not be played back correctly if  
overwritten on a computer.  
Up to 999 pictures and movie files can be  
added to each folder. If the desired folder  
already contains 999 pictures, new pictures or  
movies cannot be added.  
Nikon Transfer does not start  
when camera is connected.  
Camera is off.  
Battery is exhausted.  
USB cable is not correctly connected.  
Camera is not recognized by the computer.  
Computer is not set to start Nikon Transfer  
automatically.  
For more information on Nikon Transfer, refer  
to help information contained in Nikon  
Transfer.  
Check the compatible operating systems.  
Pictures to be printed are not  
displayed.  
Memory card contains no pictures. Replace  
memory card.  
Remove memory card to print pictures from  
internal memory.  
Cannot select paper size with  
camera.  
Paper size cannot be selected from the camera if 86, 87  
the printer does not support the paper sizes  
used by the camera, or the printer automatically  
selects the paper size. Use the printer to select  
paper size.  
148  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Nikon COOLPIX S570 Digital Camera  
Type  
Compact digital camera  
Effective pixels  
Image sensor  
Lens  
12.0 million  
1
/2.3-in. CCD; approx. 12.39 million total pixels  
5× optical zoom, NIKKOR lens  
Focal length  
5.0-25.0mm (equivalent with 35mm [135] format picture angle:  
28-140mm)  
f/-number  
Construction  
Digital zoom  
f/2.7-6.6  
7 elements in 6 groups  
Up to 4× (equivalent with 35mm [135] format picture angle:  
approx. 560mm)  
Vibration reduction  
Autofocus (AF)  
Electronic VR  
Contrast-detect AF  
Focus range (from  
lens)  
[W]: Approx. 45 cm (1 ft. 6 in.) to , [T]: Approx. 70 cm (2 ft. 4  
in.) to ∞  
Macro mode: Approx. 3 cm (1.2 in.) to (when the zoom is  
zoomed out)  
Focus-area selection  
Monitor  
Auto (9-area automatic selection), center, manual with  
99 focus areas, face priority  
2.7-in., approx. 230k-dot, TFT LCD and 5-level brightness  
adjustment  
Frame coverage  
(shooting mode)  
Approx. 97% horizontal and 97% vertical  
Frame coverage  
(playback mode)  
Approx. 100% horizontal and 100% vertical  
Storage  
Media  
Internal memory (approx. 47 MB)  
SD (Secure Digital) memory cards  
File system  
File formats  
DCF, Exif 2.2, and DPOF compliant  
Still pictures: JPEG  
Movies: AVI (Motion-JPEG compliant)  
Sound files: WAV  
Image size (pixels)  
4,000 × 3,000 High (4000P)/Normal (4000)  
3,264 × 2,448 Normal (3264)  
2,592 × 1,944 Normal (2592)  
2,048 × 1,536 Normal (2048)  
1,024 × 768 PC screen (1024)  
640 × 480 TV screen (640)  
3,968 × 2,232 16:9 (3968)  
ISO sensitivity (Standard ISO 80, 100, 200, 400, 800, 1600, 3200, Auto (auto gain from ISO  
output sensitivity) 80 to 1600), Fixed range auto (ISO 80 to 400, 80 to 800)  
149  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Specifications  
Exposure  
Metering  
256-segment matrix, center-weighted (digital zoom less than  
2×), spot (digital zoom 2× or more)  
Exposure control  
Programmed auto exposure with motion detection and  
1
exposure compensation (–2.0 to +2.0 EV in steps of /3 EV)  
Range  
(ISO 100)  
[W]: –1.1 to +15.7 EV  
[T]: 1.5 to 18.3 EV  
Shutter  
Speed  
Mechanical and charge-coupled electronic shutter  
1
/1500-1 s (when ISO sensitivity is set to Auto or locked)  
4 s (when scene mode is set to Fireworks show)  
Electronically-controlled ND filter (-2 AV) selection  
2 steps (f/2.7 and f/5.4 [W])  
Aperture  
Range  
Self-timer  
Built-in flash  
Can be selected from 10 and 2 second duration  
Range (approx.)  
(ISO sensitivity: Auto  
[W]: 0.5 to 5.5 m (1 ft. 8 in. to 18 ft.)  
[T]: 0.5 to 2.2 m (1 ft. 8 in. to 7 ft. 3 in.)  
)
Flash control  
Interface  
TTL auto flash with monitor preflashes  
Hi-Speed USB  
Data Transfer Protocol MTP, PTP  
Video output  
Can be selected from NTSC and PAL  
I/O terminal  
Audio/video output; digital I/O (USB)  
Supported languages  
Arabic, Chinese (Simplified and Traditional), Czech, Danish,  
Dutch, English, Finnish, French, Greek, German, Hungarian,  
Indonesian, Italian, Japanese, Korean, Polish, Portuguese,  
Norwegian, Russian, Spanish, Swedish, Thai, Turkish  
Power sources  
One Rechargeable Li-ion Battery EN-EL10 (supplied)  
AC Adapter EH-62D (available separately)  
*
Battery life  
Approx. 220 shots (EN-EL10)  
Dimensions  
(W × H × D)  
Approx. 92 × 56.5 × 21.5 mm (3.6 × 2.2 × 0.8 in.) (excluding  
projections)  
Weight  
Approx. 120 g (4.2 oz.) (without battery and SD memory card)  
Operating environment  
Temperature  
Humidity  
0 to 40 °C (32 to 104 °F)  
Less than 85% (no condensation)  
150  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Unless otherwise stated, all figures are for a camera with a fully-charged  
Rechargeable Li-ion Battery EN-EL10 operated at an ambient temperature of  
25 °C (77 °F).  
* Based on Camera and Imaging Products Association (CIPA) standards for measuring the life  
of camera batteries. Measured at 23 °C (73 °F); zoom adjusted with each shot, flash fired  
with every other shot, image mode set to I Normal (4000). Battery life may vary  
depending on shooting interval and length of time menus and images are displayed.  
Rechargeable Li-ion Battery EN-EL10  
Type  
Rechargeable lithium-ion battery  
DC 3.7 V, 740 mAh  
Rated capacity  
Operating temperature  
0 to 40 °C (32 to 104 °F)  
Dimensions  
(W × H × D)  
Approx. 31.5 × 39.5 × 6 mm (1.2 × 1.6 × 0.2 in.) (excluding  
projections)  
Weight  
Approx. 15 g (0.5 oz) (excluding battery case)  
Battery Charger MH-63  
Rated input  
AC 100-240 V, 50/60 Hz, 0.07-0.045 A  
7-10.8 VA  
Rated capacity  
Rated output  
DC 4.2 V, 0.55 A  
Battery  
Rechargeable Li-ion Battery EN-EL10  
Approx. 100 minutes when battery is fully discharged  
0 to 40 °C (32 to 104 °F)  
Charging time  
Operating temperature  
Dimensions  
(W × H × D)  
Approx. 54 × 20 × 85 mm (2.1 × 0.8 × 3.3 in.) (excluding power  
cable)  
Length of power cable  
Weight  
Approx. 1.8 m (6 ft.)  
Approx. 55 g (1.9 oz) (excluding power cable)  
B Specifications  
Nikon will not be held liable for any errors this manual may contain. The appearance of this product  
and its specifications are subject to change without notice.  
151  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Supported Standards  
DCF: Design Rule for Camera File System is a standard widely used in the digital  
camera industry to ensure compatibility among different makes of camera.  
DPOF: Digital Print Order Format is an industry-wide standard that allows  
pictures to be printed from print orders stored on the memory card.  
Exif version 2.2: This camera supports Exif (Exchangeable Image File Format  
for Digital Still Cameras) version 2.2, a standard that allows information stored  
with photographs to be used for optimal color reproduction when images are  
output from Exif-compliant printers.  
PictBridge: A standard developed cooperatively by the digital camera and  
printer industries, allowing photographs to be output directly to a printer  
without connecting the camera to a computer.  
152  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Index  
Autofocus mode 77  
AV cable 79  
Symbols  
B
A(shooting mode) button 5, 8  
g(Tele) 4, 23  
Back light o39  
Battery 12, 14, 117  
Battery chamber 5  
Battery charger 12, 131  
Battery latch 5  
Battery level 20  
Battery-chamber/memory card slot cover  
Beach/snow g36  
Best Shot Selector 98  
Black-and-white 100  
Brightness 119  
f(Wide) 4, 23  
kApply selection button 5, 9  
AAuto mode 20  
F Auto sort mode 56  
lDelete button 5, 26, 27, 67, 78  
oExposure compensation 32  
h Favorite pictures mode 59  
mFlash mode 28  
jHelp 4, 11  
C List by date mode 53  
pMacro mode 31  
dMenu button 5  
DMovie mode 75  
cPlayback mode 5, 8, 26  
iPlayback zoom 4, 52  
CScene mode 33  
nSelf timer 30  
BSS 98  
Built-in flash 4, 28  
Built-in microphone 4, 66  
Button sound 124  
C
Cable connector 4, 79, 80, 84  
Calendar display 51  
Close-up k38  
Cloudy 96  
Color options 100  
Compression ratio 94  
Computer 80, 8083  
copying pictures to 8083  
Continuous 98  
zSetup menu 112  
FSmart portrait mode 47  
hThumbnail playback 4, 50  
.AVI 132  
.JPG 132  
.WAV 132  
A
AC adapter 131  
AF area 24  
Copy n39  
AF area mode 101  
AF assist 123  
Copying pictures 110  
Crop 74  
Audio-in/Video-in jack 79  
Auto flash 28  
Auto focus 31  
Auto mode 20  
Auto off 124  
Cyanotype 100  
D
Date 16, 116  
Date imprint 120  
Daylight 96  
Auto sort menu 58  
Auto sort mode 56  
Autofocus 77  
Delete 109  
Digital zoom 23, 123  
Direct print 84  
153  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
D-Lighting 71  
Image size 94  
DPOF print 89  
DSCN 132  
Dusk/dawn i37  
E
Incandescent 96  
Internal memory 18  
ISO sensitivity 99  
L
Electronic VR (movies) 77  
Electronic VR (still pictures) 121  
EN-EL10 12, 14  
Exposure compensation 32  
Extension 132  
Eyelet for camera strap 4  
F
Landscape c34  
Language 126  
Lens 4, 149  
Li-ion rechargeable battery 12, 14  
List by date menu 55  
List by date mode 53  
M
Face priority 101  
Favorite pictures menu 64  
Favorite pictures mode 63  
File names 132  
Fill flash 28  
Macro mode 31  
Memory capacity 20  
Memory card 18, 131  
Memory card slot 5, 18  
Menus 114  
Fireworks show m39  
Firmware version 130  
Fixed range auto 99  
Flash 28, 29  
Flash lamp 5, 29  
Flash off 28  
Monitor 5, 6, 135  
Monitor settings 119  
Motion detection 122  
Movie menu 76  
Movie mode 75  
Movie options  
Fluorescent 96  
Focus 24, 77, 101  
Focus lock 102  
Folder name 132  
Food u43  
Format 19, 125  
Format memory card 19, 125  
Formatting internal memory 125  
FSCN 132  
Full-time AF 77  
H
Halfway 11  
Help 11  
TV movie 76  
Movie playback 78  
Movie settings 76  
Multi selector 5, 9  
Multi-shot 16 98  
Museum l38  
N
Night landscape j37  
Night portrait e35  
Nikon Transfer 80, 81  
Number of exposures remaining 20, 95  
O
Optional accessories 131  
I
P
Identifier 132  
Panorama assist p40, 45  
Paper size 86, 87  
Party/indoor f36  
Image mode 21, 33, 94, 95  
Image review 119  
154  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Photo info 119  
PictBridge 84  
Pin cover 5  
Playback 26, 27, 50, 52  
Playback menu 106  
Playback-mode selection menu 8  
Portrait b34  
Slow sync 28  
Small picture 73  
Smart portrait menu 48  
Smart portrait mode 47  
Smile timer 49  
Software Suite 80  
Sound settings 124  
Speaker 5  
Power 16, 20  
Power switch 4, 20  
Power-on lamp 4, 20  
Preset manual 97  
Print 86, 87, 90  
Sports d35  
SSCN 132  
Standard color 100  
Strap 11  
Print set 90, 92  
Sunset h36  
Print Set (Date) 91  
Printer 84  
Protect 109  
T
Thumbnail playback 50  
Time zone 116, 118  
Tripod 5  
TV movie 76  
R
Rechargeable battery 131  
Rechargeable Li-ion battery 12, 14  
Recording movies 75  
Red-eye reduction 28, 29  
Reset all 128  
Rotate image 110  
RSCN 132  
S
Scene auto selector x34, 41  
Scene mode 33, 34  
Self-timer 30  
Self-timer lamp 4, 30  
Sepia 100  
Setup menu 112  
Shooting 20, 22, 24  
Shooting menu 93  
Shooting-mode selection menu 8  
Shutter sound 124  
Shutter-release button 4, 24  
Single 98  
U
USB cable 80, 81, 85  
V
Video mode 79, 126  
ViewNX 80, 82  
Vivid color 100  
Voice memo 66  
Volume 78  
W
Welcome screen 115  
White balance 96  
Z
Zoom control 4, 78  
Single AF 77  
Skin softening 48, 72  
Slide show 108  
155  
Download from Www.Somanuals.com. All Manuals Search And Download.  
156  
Download from Www.Somanuals.com. All Manuals Search And Download.  
157  
Download from Www.Somanuals.com. All Manuals Search And Download.  
158  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
No reproduction in any form of this manual, in whole or in part  
(except for brief quotation in critical articles or reviews), may be  
made without written authorization from NIKON CORPORATION.  
Printed in Europe  
CT9H01(11)  
6MM72611-01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Convection Oven H 4882 BP User Manual
Milwaukee Sander 6065 User Manual
Multi Tech Systems Network Card 40 01459 D0 001 User Manual
Nortel Networks Network Card Installing Media Dependent Adapters User Manual
NuTone Indoor Furnishings 754RBNT User Manual
Omron Healthcare Blood Pressure Monitor BP760 User Manual
Onkyo Portable Speaker SKF 201 User Manual
Oregon Scientific Clock RRM326P User Manual
Oster Blender 6640 User Manual
Panasonic Answering Machine KX TG2431 User Manual