Model No. NTCCM58020
Serial No.
_
USER’S MANUAL
Serial Number
Decal (on frame)
QUESTIONS?
As a manufacturer, we are
committed to complete customer
satisfaction. If you have ques-
tions, or if there are missing
parts, we will guarantee com-
plete satisfaction through direct
assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-888-936-4266
Mon.–Fri., 8 a.m.–6:30 p.m.
Eastern Standard Time (exclud-
ing holidays)
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Visit our website at
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Congratulations for selecting the new NordicTrack®
MTN 740 stepper. Stepping is one of the most effec-
tive exercises for increasing cardiovascular fitness,
building endurance, and toning the entire body. The
NordicTrack® MTN 740 stepper blends advanced engi-
neering with innovative styling to let you enjoy this
exercise in the convenience and privacy of your home.
toll-free at 1-888-936-4266, Monday through Friday, 8
a.m. until 6:30 p.m. Eastern Standard Time (excluding
holidays). To help us assist you, please note the prod-
uct model number and serial number before calling.
The model number is NTCCM58020. The serial num-
ber can be found on a decal attached to the stepper
(see the front cover of this manual for the location of
the decal).
For your benefit, read this manual carefully before
you use the stepper. If you have additional ques-
tions, please call our Customer Service Department
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Fan
Book Rack
Console
Handlebar
Water Bottle Holder*
Pulse Sensor
FRONT
BACK
Side Shield
Wheel
Pedal
LEFT SIDE
Adjustable Foot
*No water bottle is included
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Assembly requires two people. Place all parts of the stepper in a cleared area and remove the packing mate-
rials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen
wrenches, assembly requires an adjustable wrench
and a rubber mallet
.
As you assemble the stepper, use the drawings below to identify the small parts used in assembly. The number
in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 18. The
second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assem-
bled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
M8 Split
Washer (54)–4
M10 Split
Washer (30)–6
M8 Nylon
Locknut (28)–4
M10 Nylon
Locknut (27)–4
M10 x 75mm Button
Screw (92)–2
Console
Screw (57)–4
M10 x 25mm Button
Screw (29)–4
M10 x 82mm Button
Bolt (26)–4
M8 x 35mm
Button Bolt (24)–4
M10 x 91mm Button
Screw (63)–2
1. While another person lifts and holds the indicated end
of the Frame (1), attach the Front Stabilizer (95) to the
Frame with two M10 x 75mm Button Screws (92).
Make sure that the Front Stabilizer is turned so the
Wheels (67) are not touching the floor.
1
67
92
67
95
1
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. While another person lifts and holds the indicated end
of the Frame (1), insert the Stabilizer (2) into the
Frame. Attach the Stabilizer with four M10 x 25mm
Button Screws (29) and four M10 Split Washers (30).
2
1
2
30
29
3. Slide one of the Pedal Brackets (13) onto the end of
the Right Pedal Leg (10). Align the lower hole in the
Pedal Bracket with the hole in the Lower Pedal Leg
(12). Insert an M10 x 82mm Button Bolt (26) into the
Pedal Bracket and the Lower Pedal Leg.
3
26
10
12
27
Next, align the upper hole in the Pedal Bracket (13)
with the hole in the Right Pedal Leg (10). Insert an
M10 x 82mm Button Bolt (26) into the Pedal Bracket
and the Right Pedal Leg. Tighten an M10 Nylon
Locknut (27) onto each of the Button Bolts.
13
13
Attach the other Pedal Bracket (13) in the same way.
4. While another person holds the Upright (3) near the
Frame (1), connect the Extension Wire Harness (77)
to the Wire Harness (39).
4
Be careful
to avoid
pinching the
Wire Harnesses
(39, 77) during
this step.
Gently pull the upper end of the Extension Wire
Harness (77) out of the top of the Upright (3) to
remove any slack. Then, carefully insert the Upright
into the Frame (1). Attach the Upright with two M10 x
91mm Button Screws (63) and two M10 Split Washers
(30).
3
77
39
30
1
63
5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. While another person holds the Left Handlebar (6) near
the Upright (3), connect the Handgrip Pulse Wire (70)
to the Pulse Extension Wire (98). Insert the excess
wiring into the Left Handlebar.
5
5
Hold two Handlebar Bushings (66) around the rectan-
gular tube on the left side of the Upright (3). Slide the
Left Handlebar (6) onto the Handlebar Bushings and
the tube on the Upright; be careful not to damage the
the Handgrip Pulse Wire (70) or the Pulse Extension
Wire (98). Attach the Left Handlebar with two M8 x
35mm Button Bolts (24), two M8 Split Washers (54),
and two M8 Nylon Locknuts (28); be careful not to
damage the Wires as you insert the Button Bolts.
Firmly tighten the Nylon Locknuts.
66
70
3
28
Be careful
to avoid
98
24
pinching the
Wires (70,
98) during
this step.
6
54
Attach the Right Handlebar (5) in the same way.
6. While another person holds the Console (4) near the
Upright (3), connect Extension Wire Harness (77), the
Pulse Extension Wire (98), and the ground wires to the
corresponding wires on the Console. Insert any slack
wire up into the Console and down into the Upright.
6
4
Bookrack
Attach the Console (4) to the Upright (3) with four
Console Screws (57). Make sure that the wires are
not pinched.
77
98
Console
Wires
Snap the bookrack onto the Console (4) in the location
shown.
Ground
Wires
3
Be careful to avoid
pinching the wires
during this step.
57
7. Make sure that all parts of the stepper are properly tightened. Note: Some hardware may be left over
after assembly is completed. To protect the floor or carpet from damage, place a mat under the stepper.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE RECEIVER FOR THE OPTIONAL CHEST PULSE SENSOR
If you purchase the optional chest pulse sensor (see page 15), follow the steps below to install the receiver
included with the chest pulse sensor.
1. Look under the Console (4) and locate the left water
1
bottle holder. Insert the tip of a flat-bladed screwdriver
Tab
between the side of the water bottle holder and the
Console in the location shown by arrow A. Gently pry
the indicated tab out of the small slot in the side of the
water bottle holder. Firmly push up on the bottom of the
water bottle holder until the tab remains outside of the
slot when the screwdriver is removed.
4
A
B
Next, insert the tip of the screwdriver between the
opposite side of the water bottle holder and the Console
(4) in the location shown by arrow B. Gently pry the side
of the water bottle holder away from the Console and
push the water bottle holder out of the Console.
Water
Bottle
Holder
Jack
Remove the right water bottle holder in the same way.
2
Hold and lift here
Next, locate the round audio cable jack. If there is a sil-
ver ring around the jack, remove the silver ring by turn-
ing it counterclockwise with the screwdriver.
2. Remove the four recessed screws (not shown) from the
underside of the Console (4). Do not remove the
screws attaching the Console to the Upright (3).
4
Hold the fan and the top of the Console (4) in the loca-
tions shown at the right. Carefully lift the fan and the
top of the Console; do not let the fan slide out of the
top of the Console.
3
3
4
3. While another person holds the top of the Console (4)
and the fan in a vertical position, slide the receiver onto
the indicated plastic pin on the Console; make sure
that the receiver is oriented exactly as shown.
Locate the two small screws included with the chest
pulse sensor. Attach the receiver to the Console with
the two screws as shown.
Screws
Receiver
Pin
Connect the wire on the receiver to the indicated wire
on the Console (4). Note: The other wires included with
the chest pulse sensor may be discarded.
Wire
4. Refer to step 2 above. Lower the top of the Console (4) and the fan. Make sure that no wires are pinched.
Reattach the top of the Console with the four screws removed in step 2. Refer to step 1 above. Press the
water bottle holders back into the Console. If you removed a silver ring from the audio cable jack, reattach
the silver ring.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO OPERATE THE STEPPER
Left Display
Training Zone Bar
Matrix
Note: If there is a sheet of clear plastic on the face of the console, remove it before using the console.
FEATURES OF THE CONSOLE
HOW TO EXERCISE ON THE STEPPER
The advanced console offers a selection of features
designed to make your workouts more enjoyable and
effective. When the manual mode of the console is
selected, the stepping speed can be changed with the
touch of a button. As you exercise, the console will
display continuous exercise feedback. You can even
measure your heart rate using the handgrip pulse sen-
sor or the optional chest pulse sensor (see page 15).
Hold the handle-
bars and step onto
the pedals. Begin
stepping with a
smooth, continu-
ous motion.
Because the ped-
als move indepen-
dently of each
Handlebars
The console also offers four preset workout programs.
Each program automatically changes the stepping
speed as it guides you through an effective workout.
other, you must
maintain a continu-
ous motion or both
pedals will sink to
the floor. Change
the stepping speed
(see step 3 on
page 9) until you
can comfortably
maintain a continu-
ous motion.
Pedals
The console also features new iFIT.com interactive
technology. Having iFIT.com technology is like having a
personal trainer in your home. Using the included
audio cable, you can connect the stepper to your home
stereo, portable stereo, or computer and play special
iFIT.com CD programs (iFIT.com CD’s are available
separately). IFIT.com CD programs automatically con-
trol the stepping speed as a personal trainer coaches
you through every step of your workout. High-energy
music provides added motivation. Each CD features
two programs designed by certified personal trainers.
For information about the availability of iFIT.com
CD’s, call toll-free 1-888-936-4266.
As you step, you can exercise your upper leg muscles
by keeping your feet flat on the pedals. To focus on
your calf muscles, rise on your toes as you step.
Stand erect or lean forward slightly as you exercise.
Always keep your back straight to avoid injury.
With the stepper connected to your computer, you can
also go to our Web site and access programs directly
from the internet. Explore www.iFIT.com for details.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor your progress with the matrix, the
Training Zone bar, and the two displays.
HOW TO USE THE MANUAL MODE
4
The matrix—
When the manual
mode or the
iFIT.com mode is
selected, the matrix
will display a stair-
case. As you exer-
cise, the indicators in the staircase will light, one
at a time, until the entire staircase is lit. This cycle
will then repeat.
Begin stepping to activate the console.
1
The stepper requires no batteries or external
power source. Power is supplied to the step-
per by a generator while you are stepping. To
activate the console, begin stepping. After a few
seconds, the console displays will light. A tone
will then sound and the console will be ready for
use.
Select the manual mode.
2
3
The Training Zone
bar—The Training
Zone bar will show
the approximate
intensity level of
your exercise. For
example, if three or
four indicators in the bar are lit, the bar shows that
the intensity level is ideal for fat burning.
When the power is
turned on, the
manual mode will
be selected. If you
have selected a
program or the
iFIT.com mode,
select the manual mode by pressing the Program
Select button repeatedly until a staircase appears
in the matrix and the indicator above the iFIT.com
button is not lit.
The left display—
The left display will
show the elapsed
time, the total num-
ber of steps you
have completed,
Begin stepping and change the stepping
speed as desired.
and the approxi-
While you are
mate number of vertical feet that you have
stepped. The display will change from one number
to the next every few seconds, as shown by the
indicators around the display. Note: When a pro-
gram is selected, the display will show the time
remaining in the program and the time remaining
in the current segment of the program instead of
the elapsed time.
stepping, change
the stepping
speed by pressing
the Slower or
Faster button.
When the Slower
button is pressed, the resistance of the pedals
will increase and your stepping speed will
decrease; when the Faster button is pressed, the
resistance will decrease and you will have to
increase your stepping speed to prevent both
pedals from sinking to the floor. The stepping
speed can be decreased or increased in incre-
ments of 5 steps per minute. To change the step-
ping speed quickly, press one of the Steps Per
Minute buttons.
The right display—
The right display
will show your step-
ping speed and the
approximate num-
bers of fat calories
and calories you
have burned (see FAT BURNING on page 17).
The display will change from one number to the
next every few seconds, as shown by the indica-
tors around the display. The display will also show
your heart rate when you use the handgrip pulse
sensor or the optional chest pulse sensor. Note:
Each time the stepping speed changes, the dis-
play will show the stepping speed.
Note: After the Slower, Faster, or Steps Per
Minute buttons are pressed, it will take a moment
for the stepper to reach the selected setting.
Make sure to continue stepping while changing
the stepping speed.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Measure your heart rate if desired.
Turn on the fan if desired.
5
6
7
Note: If you hold the handgrip pulse sensor
and wear the optional chest pulse sensor at
the same time, the console may not display
your heart rate accurately.
To turn on the fan at low speed, press the Fan
button. Pivot the fan to the desired angle. To turn
on the fan at high speed, press the Fan button a
second time. To turn off the fan, press the Fan
button a third time.
If there are
thin sheets of
plastic on the
metal con-
When you are finished exercising, the console
will automatically turn off.
tacts on the
handgrip
pulse sensor,
If the pedals are not moved for several seconds, a
tone will sound, the console will pause, and the
left display will begin to flash.
peel off the
plastic. To
Contacts
If the pedals are not moved for about one minute,
the console will turn off, but the displays will not
be reset. If the pedals are not moved for about
five minutes, the console will turn off and the dis-
plays will be reset.
measure your
heart rate,
hold the con-
tacts; your palms must be resting on the upper
contacts, and your fingers must be touching the
lower contacts. Avoid moving your hands.
Note: The console features an information mode that
keeps track of the total number of hours that the step-
per has been used and the total number of steps that
have been completed. To view this information, hold
down the Program
When your pulse
is detected, the
Heart Rate indica-
tor above the right
Select button for about
display will begin
three seconds. The left
to flash, one or
display will show the
two dashes (– –)
total number of hours
will appear in the right display, and then your heart
rate will be shown. For the most accurate heart
rate reading, hold the contacts for at least 15 sec-
onds.
that the stepper has
been used.
Press the iFIT.com but-
ton. The left display will
then show the total
number of steps com-
pleted, divided by 100.
For example, if the num-
ber 750 appears,
Note: If you continue to hold the pulse sensor, the
right display will show your heart rate for up to 30
seconds. The display will then show your heart
rate along with the other modes.
If your heart rate is not shown, make sure that
your hands are positioned as described. Be care-
ful not to move your hands excessively or to
squeeze the metal contacts too tightly. For opti-
mal performance, clean the metal contacts using
a soft cloth; never use alcohol, abrasives, or
chemicals.
75,000 steps have been completed.
Press the Program Select button again to exit the
information mode.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
stepping speed setting for the second segment
will then be shown in the flashing Current
Segment column and the stepping speed will
automatically change.
HOW TO USE PRESET WORKOUT PROGRAMS
Begin stepping to activate the console.
1
Note: If all of the indicators in the Current Segment
column are lit after the stepping speed settings
have moved to the left, the settings will move
downward so that only the highest indicators
appear in the matrix.
See step 1 on page 9.
Select one of the four workout programs.
2
When the power is
turned on, the
manual mode will
be selected. To
select a workout
The program will continue until the stepping
speed setting for the last segment is shown in the
Current Segment column of the matrix and no
time remains in the program.
program, press
the Program
Note: During the program, you can override the
stepping speed for the current segment, if
desired, by pressing the Steps Per Minute but-
tons. However, when the next segment begins,
the stepping speed will automatically change if a
different stepping speed is programmed for the
next segment. If you stop stepping for several
seconds, a tone will sound, the program will
pause, and the left display will begin to flash. To
restart the program, simply resume stepping.
Select button repeatedly until a “P 1,” “P 2,” “P 3,”
or “P 4” appears in the right display.
When a workout program is selected, the matrix
will show the first seven stepping speed settings
of the program. The left display will show how
long the program will last.
Begin stepping to start the program.
3
Each program is divided into several time seg-
ments of different lengths. (The left display will
show the time remaining in the program and the
time remaining in the current segment of the pro-
gram.) One stepping speed is programmed for
each segment. (The same stepping speed may be
programmed for two or more consecutive seg-
ments.)
Monitor your progress with the two displays.
See step 4 on page 9.
4
5
6
7
Measure your heart rate if desired.
See step 5 on page 10.
Turn on the fan if desired.
See step 6 on page 10.
The stepping
Current Segment
speed setting for
the first segment
will be shown in
the flashing
When the program is finished, the console
will automatically turn off.
Current Segment
column of the
matrix. The step-
ping speed settings for the next several segments
will be shown in the columns to the right.
If the pedals are not moved for several seconds, a
tone will sound, the console will pause, and the
left display will begin to flash.
When only three seconds remain in the first seg-
ment of the program, both the Current Segment
column and the column to the right will flash, a
series of tones will sound, and all stepping speed
settings will move one column to the left. The
If the pedals are not moved for about one minute,
the console will turn off, but the displays will not
be reset. If the pedals are not moved for about
five minutes, the console will turn off and the dis-
plays will be reset.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR PORTABLE STEREO
HOW TO CONNECT THE STEPPER TO YOUR
CD PLAYER OR COMPUTER
Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
3.5mm LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
To use iFIT.com CD’s, the stepper must be connect-
ed to your portable CD player, portable stereo, home
stereo, or computer with CD player. See pages 12
and 13 for connecting instructions. To use iFIT.com
programs directly from our Web site, the stepper
must be connected to your home computer. See page
13 for connecting instructions.
A. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into the included adapter. Plug the
adapter into an AUDIO OUT jack on your stereo.
A, B
HOW TO CONNECT YOUR PORTABLE CD PLAYER
Note: If your CD player has separate LINE OUT
and PHONES jacks, see instruction A below. If
your CD player has only one jack, see instruction
B.
AUDIO OUT
RIGHT
LEFT
Audio
Cable
Adapter
A. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into the LINE OUT jack on your
CD player. Plug your headphones into the
PHONES jack.
B. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into the LINE OUT jack on your
stereo. Do not use the adapter.
A
PHONES LINE OUT
LINE OUT
PHONES
C. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into a 3.5mm Y-adapter (available
at electronics stores). Plug the Y-adapter into the
PHONES jack on your stereo. Plug your head-
phones into the other side of the Y-adapter.
Head-
phones
Audio
Cable
B. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into a 3.5mm Y-adapter (available
at electronics stores). Plug the Y-adapter into the
PHONES jack on your CD player. Plug your head-
phones into the other side of the Y-adapter.
C
PHONES
3.5mm
Audio
Y-adapter
Cable
B
PHONES
Headphones
PHONES
3.5mm
Y-adapter
Audio
Cable
Headphones
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR HOME STEREO
HOW TO CONNECT YOUR COMPUTER
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
Note: If your computer has a 3.5mm LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into the included adapter. Plug the
adapter into the LINE OUT jack on your stereo.
A. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into the LINE OUT jack on your
computer.
A
A
CD
LINE OUT
VCR
Amp
LINE OUT
LINE OUT
Audio
Cable
Audio
Cable
Adapter
B. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into a 3.5mm Y-adapter (available
at electronics stores). Plug the Y-adapter into the
PHONES jack on your computer. Plug your head-
phones or speakers into the other side of the Y-
adapter.
B. Plug one end of the audio cable into the jack
beneath the console of the stepper. Plug the other
end of the cable into the included adapter. Plug the
adapter into an RCA Y-adapter (available at elec-
tronics stores). Next, remove the wire that is cur-
rently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
RCA Y-adapter. Plug the RCA Y-adapter into the
LINE OUT jack on your stereo.
B
PHONES
B
CD
Audio
Cable
VCR
3.5mm
Y-adapter
Amp
LINE OUT
Headphones/Speakers
RCA
Y-adapter
Audio
Cable
Adapter
Wire removed from
LINE OUT jack
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE IFIT.COM CD PROGRAMS
The program will function in almost the same way
as a workout program (see step 3 on page 11).
However, an electronic “chirping” sound will alert
you when the stepping speed is about to change.
To use iFIT.com CD programs, the stepper must be
connected to your portable CD player, portable stereo,
home stereo, or computer with CD player. See HOW
TO CONNECT THE STEPPER TO YOUR CD PLAY-
ER OR COMPUTER on pages 12 and 13. For infor-
mation about the availability of iFIT.com CD’s, call
1-888-936-4266.
Note: If the stepping speed does not change
when a “chirp” is heard:
• Make sure that the indicator above the
iFIT.com button is lit.
Follow the steps below to use an iFIT.com CD
program.
• Adjust the volume of your CD player. If the
volume is too high or too low, the console
may not detect the program signals.
Begin stepping to activate the console.
1
• Make sure that the audio cable is properly
connected and that it is fully plugged in.
See step 1 on page 9.
Select the iFIT.com mode.
Monitor your progress with the two displays.
See step 4 on page 9.
2
4
5
6
7
When the con-
sole is turned on,
the manual mode
will be selected.
To select the
iFIT.com mode,
Measure your heart rate if desired.
See step 5 on page 10.
press the
Turn on the fan if desired.
See step 6 on page 10.
iFIT.com button. The indicator above the button
will light.
Insert an iFIT.com CD into your CD player and
press the play button.
When the program is finished, the console
will automatically turn off.
3
A moment after the play button is pressed, your
personal trainer will begin guiding you through
your workout. Simply follow your personal trainer’s
instructions.
See step 7 on page 10.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to the stepper and begin stepping.
HOW TO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
7
When the on-screen countdown ends, the pro-
gram will begin. The program will function in
almost the same way as a workout program (see
step 3 on page 11). However, an electronic “chirp-
ing” sound will alert you when the stepping speed
is about to change.
Our Web site at www.iFIT.com allows you to play
iFIT.com programs directly from the internet. To use
programs from our Web site, the stepper must be con-
nected to your home computer. See HOW TO CON-
NECT YOUR COMPUTER on page 13. In addition,
you must have an internet connection and an internet
service provider. A list of specific system requirements
is found on our Web site.
Monitor your progress with the two displays.
See step 4 on page 9.
8
9
Measure your heart rate if desired.
See step 5 on page 10.
Follow the steps below to use a program from our
Web site.
Begin stepping to activate the console.
1
10 Turn on the fan if desired.
See step 1 on page 9.
See step 6 on page 10.
Select the iFIT.com mode.
2
When you are finished exercising, the console
will automatically turn off.
11
When the console
is turned on, the
manual mode will
See step 7 on page 11.
be selected. To
select the iFIT.com
mode, press the
THE OPTIONAL CHEST PULSE SENSOR
iFIT.com button.
The indicator above the button will light.
The optional chest pulse sensor provides hands-free
operation and continuously monitors your heart rate
during your workouts. To purchase the optional
chest pulse sensor, call 1-888-936-4266.
Go to your computer and start an internet
connection.
3
Start your Web browser, if necessary, and go
to our Web site at www.iFIT.com.
4
Follow the desired links on our Web site to
select a program.
5
Read and follow the on-line instructions for using
a program.
Follow the on-line instructions to start the
program.
6
When you start the program, an on-screen count-
down will begin.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING AND MAINTENANCE
Inspect and tighten all parts of the stepper regularly.
The stepper can be cleaned with a soft cloth and a
small amount of mild, non-abrasive detergent. Keep
liquids away from the console.
52
32
HOW TO ADJUST THE REED SWITCH
56
For the console to display correct feedback, the pedals
must move at least five inches with each step. If the
console displays incorrect feedback when the pedals
are moved five inches or more, the Reed Switch (56)
should be adjusted.
46
8
Turn the Flywheel (46) until the Magnet (32) is aligned
with the Reed Switch (56) (refer to the inset drawing).
Loosen the indicated Screw (52). Slide the Reed
Switch slightly closer to the Flywheel, and retighten
the Screw. Make sure that the Magnet will not hit
the Reed Switch when the Flywheel turns. Repeat
until the console displays correct feedback.
65
Carefully slide the Right Side Shield (8) back onto the
stepper. Reattach the three M4 x 38mm Screws (64)
and the two M4 x 25mm Screws (65). Reattach the
Pedal Bracket (13).
26
13
64
HOW TO LEVEL THE STEPPER
Remove the right Pedal Bracket (13) by removing the
two M10 x 82mm Button Bolts (26) and the two M10
Nylon Locknuts (not shown). Then, remove the two M4
x 38mm Screws (64) and the three M4 x 25mm Screws
(65). Carefully slide the Right Side Shield (8) off the
stepper.
If the stepper rocks
slightly during use,
turn one or both of
2
the Feet (15) under
the Stabilizer (2) until
the stepper is level.
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
WARNING:
• Before beginning this or any exercise pro-
gram, consult your physician. This is espe-
cially important for individuals over the
age of 35 or individuals withpre-existing
health problems.
Fat Burning
To burn fat effectively, you must exercise at a relative-
ly low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for ener-
gy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy. If
your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest num-
ber or the middle number in your training zone as you
exercise.
• The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in deter-
mining heart rate trends in general.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the intensity of your exercise until your heart
rate is near the highest number in your training zone.
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition and
adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat burn-
ing, and cardiovascular (aerobic) exercise.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in prepa-
ration for exercise.
Training zone exercise, consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise pro-
gram, do not keep your heart rate in your training
zone for longer than 20 minutes.)
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
To find the proper heart rate for you, first find your age
at the bottom of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers above
your age; the three numbers are your “training zone.”
The lowest number is the recommended heart rate for
fat burning; the middle number is the recommended
heart rate for maximum fat burning; and the highest
number is the heart rate for aerobic exercise.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three work-
outs each week, with at least one day of rest between
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
desired. The key to success is make exercise a regu-
lar and enjoyable part of your everyday life.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. NTCCM58020
R0804A
19
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-888-936-4266, Monday through
Friday, 8 a.m. until 6:30 p.m. Eastern Standard Time (excluding holidays). To help us assist you, please be pre-
pared to give the following information:
• The MODEL NUMBER of the product (NTCCM58020)
• The NAME of the product (NordicTrack MTN 740 stepper)
• The KEY NUMBER and DESCRIPTION of the part(s) (see page 18 of this manual)
LIMITED WARRANTY
ICON OF CANADA, INC., (ICON), warrants this product to be free from defects in workmanship and mate-
rial, under normal use and service conditions, for a period of one (1) year from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replac-
ing or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for
which warranty claims are made must be pre-authorized by ICON. This warranty does not extend to any
product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or
abnormal usage or repairs not provided by an ICON authorized service center; to products used for com-
mercial or rental purposes; or to products used as store display models. No other warranty beyond that
specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connec-
tion with the use or performance of the product or damages with respect to any economic loss, loss of prop-
erty, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other conse-
quential damages of whatsoever nature. Some provinces do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you. The warranty
extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantabili-
ty or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some
provinces do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from province to
province.
ICON OF CANADA, INC., 900 de l’Industrie, St. Jerôme, QC J7Y 4B8
Part No. 218032 R0804A
Printed in Canada © 2004 ICON IP, INC.
Download from Www.Somanuals.com. All Manuals Search And Download.
|