Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations on your purchase of the NetComm 5-Port 1000BASE-T Gigabit Ethernet
Switch. The following guide will take you through the installation and application of your
Switch as well as provide information about Gigabit Ethernet and switching technology.
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Gigabit Ethernet Technology
Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure,
format, and support for CSMA/CD protocol, full duplex, flow control, and management objects,
but with a tenfold increase in theoretical throughput over 100-Mbps Fast Ethernet and a
hundredfold increase over 10-Mbps Ethernet. Since it is compatible with all 10-Mbps and 100-
Mbps Ethernet environments, Gigabit Ethernet provides a straightforward upgrade without
wasting a company's existing investment in hardware, software, and trained personnel.
The increased speed and extra bandwidth offered by Gigabit Ethernet is essential to coping with
the network bottlenecks that frequently develop as computers and their busses get faster and
more users use applications that generate more traffic. Upgrading key components, such as your
backbone and servers to Gigabit Ethernet can greatly improve network response times as well as
significantly speed up the traffic between your subnets.
Gigabit Ethernet supports video conferencing, complex imaging, and similar data-intensive
applications and, since data transfers occur 10 times faster than Fast Ethernet, servers outfitted
with Gigabit Ethernet NIC's are able to perform 10 times the number of operations in the same
amount of time.
Switching Technology
Another key development pushing the limits of Ethernet technology is in the field of switching
technology. A switch bridges Ethernet packets at the MAC address level of the Ethernet
protocol transmitting among connected Ethernet or fast Ethernet LAN segments.
Switching is a cost-effective way of increasing the total network capacity available to users on a
local area network. A switch increases capacity and decreases network loading by making it
possible for a local area network to be divided into different segments which don't compete with
each other for network transmission capacity, giving a decreased load on each.
The switch acts as a high-speed selective bridge between the individual segments. Traffic that
needs to go from one segment to another is automatically forwarded by the switch, without
interfering with any other segments. This allows the total network capacity to be multiplied,
while still maintaining the same network cabling and adapter cards.
Switching LAN technology is a marked improvement over the previous generation of network
bridges, which were characterized by higher latencies. Routers have also been used to segment
local area networks, but the cost of a router and the setup and maintenance required make
routers relatively impractical. Today's switches are an ideal solution to most local area network
congestion problems.
Page 4
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
The NetComm 5-Port 1000BASE-T Gigabit Ethernet Switch has been designed for easy
installation and high performance in an environment where traffic on the network and the
number of users increase continuously.
■
■
■
■
■
■
■
■
■
■
■
■
5 x 1000Base-T Gigabit Ethernet ports
Supports Auto-Negotiation for 10/100/1000Mbps and duplex mode
Supports Auto-MDIX for each port
Support Full/Half duplex transfer mode for 10 and 100Mbps
Support Full duplex transfer mode for 1000Mbps
Full wire speed reception and transmission
Store-and-Forward switching method
Supports 8K absolute MAC addresses
Supports 256KBytes RAM for data buffering
Extensive front-panel diagnostic LEDs
IEEE 802.3x flow control for full-duplex
Back pressure flow control for half-duplex
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
Open the shipping carton of the Switch and carefully unpack its contents. The carton should
contain the following items:
■
■
■
■
One 5-Port 1000BASE-T Gigabit Ethernet Switch
Four rubber feet with adhesive backing
One external power adapter
This Guide
If any item is found missing or damaged, please contact your reseller for replacement.
Page 6
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
The figure below shows the front panels of the switch.
Front panel view of the Switch
LED Indicators
Comprehensive LED indicators display the conditions of the Switch and status of the network.
The LED indicators of the Switch include Power, Link/Act, 1000Mbps and 100Mbps. The
following shows the LED indicators for the Switch along with an explanation of each indicator.
■
POWER
This indicator lights up green when the Switch is receiving power. Otherwise, it is off.
■
Link/Act
These LED indicators light up when there is a secure connection (or link) to the desired port.
The LED indicators blink when there is reception or transmission (i.e. Activity-Act) of data
occurring on a port.
■
■
1000Mbps
These LED indicators light up when there is a secure connection (or link) to 1000Mbps
Gigabit Ethernet device at the desired port.
100Mbps
These LED indicators light up when there is a secure connection (or link) to 100Mbps Fast
Ethernet device at the desired port.
When the connection (or link) is 10Mbps, both of 1000Mbps and 100Mbps LED indicators
are off.
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
The rear panel of the Switch consists of an DC power connector. The following figure shows the
rear panel of the Switch.
5 - RJ45 10/100/1000
Power
Mbps Ports
Rear panel view of the Switch
DC Power Jack:
Power is supplied through an external AC power adapter.
Check the technical specification section for information
about the AC power input voltage.
1000BASE-T Ports:
Five Gigabit Ethernet ports of 10/100/1000Mbps Auto-
Negotiation interface.
Page 8
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
RJ-45 Network ports
All of the ports on the NP3005 are 10/100/1000 Mbps capable auto-sensing Ethernet ports.
Each port supports only unshielded twisted pair (UTP) cable using an 8-pin RJ-45 plug. The
Auto-uplink feature senses the connection of uplink (MDI-II) wiring using a straight-through
twisted pair cable to any of the 5 ports on the NP3005 switch to allow for connection to any
port of an addition switch or hub.
RJ-45 Connector
Pin Assignment
Normal Assignment
1
Input Receive Data +
Input Receive Data -
Output Transmit Data +
Output Transmit Data -
Not used
2
3
6
4,5,7,8
Figure 3
Twisted pair cables
Figures 4 and 5 illustrate the use of straight-through and crossover twisted pair cables along with
the connector.
RJ-45 plug
attached to cable
Figure 4
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Straight and crossover cable configuration
Figure 5
Page 10
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
Application examples
The NP3005 switch is designed to provide full flexibility in configuring your network
connections. The switch can be used as a standalone device or it can be used in an up linked
mode to other 10/100/1000 Mbps hubs, switches or other interconnection devices - such as
internet gateways and routers.
Figure 6 below illustrates the NP3005 in a basic network environment connected to several
Desktop computers sharing files and peripherals.
Basic Desktop Network Switch
The NP3005 switch is used as a desktop switch to build a small network that enables its users
to have 1000 Mbps access to other computers on the network and share files and resources.
Figure 6
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Cascading the switch
When attaching the NP3005 switch to a router or other devices, be sure to verify the port type
implemented before connecting any cable.
Figure 7
Connecting using Category 5/5e twisted–pair cables with RJ-45 plugs:
Your NP3005 switch supports an Auto-Detect UP-Link port feature on each of the 5 x RJ-45
ports available on this switch. Connect one end of a straight-through cable to the NP3005
switch. Connect the other end of the cable to any port of another NP3005 switch. You may also
use a crossover cable in the same way.
Connecting One NP3005 to another existing network switch:
Attach your straight through cable to any of the 5 ports on the NP3005. Next connect the other
end of the cable to the uplink port of your existing switch. (Refer to your other switch
manufacturer’s installation guide for uplinking details.)
Note: Ethernet specifications limit the cable length between your computer or server
and the switch to 328 feet (100 metres).
Page 12
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation before connecting your switch
Before you install your switch, make sure you will be operating the unit within the specified
voltage and temperature limits. To install your switch on a flat surface, simply adhere the
included rubber feet within the outlines on the bottom surface of the unit. Ensure the switch is
positioned with at least 50mm of space on all sides for adequate ventilation.
To install the switch on a wall, measure the distance between the mounting holes on the back of
the switch and mark the wall to match the measured distance. At the marked location, screw into
the wall two suitably sized screws.
Choose a location that is near the devices to be connected, is close to a suitable electrical outlet,
and provides at least 50mm of space all around the switch for ventilation.
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching computers to the switch
1. Install a 10/100/1000 Mbps (10/100Base-TX) network adapter card into every computer
you want to attach to the network. Make sure you install the Network adaptor drivers in
accordance with the manufacturers directions.
2. Prepare the twisted-pair cables with RJ-45 plugs on each end. Use Category 5/5e cable for all
connections. Make sure the cable length is less than or equal to no more than 100 metres
(328 feet).
3. Attach one end of the cable to the RJ-45 port of the computer’s network adapter card and
the other end to any available port of the NP3005 switch.
Connecting power to the switch
1. Locate a suitably switched 240volt AC power outlet.
2. Make sure that the power switch on the outlet is switched OFF before inserting the power
pack into the 240volt AC power outlet.
3. Insert the power pack into the power outlet.
4. Connect the cable attached to the power pack adapter to the power inlet on the rear panel of
the switch.
5. Switch on the power switch on the 240volt AC power outlet.
Verifying installation
When power has been applied to the switch the switch will display:
1. The green Pwr (power) LED on the front panel is on.
2. The green Link LED on each connected port is on.
When the switch is connected and operating, refer to the table in “LED’s” for information about
the LED’s and their activity.
Page 14
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
NB3005 Specifications
General
Standards:
IEEE 802.3ab 1000BASE-T
IEEE 802.3u 100BASE-TX
IEEE802.3 10BASE-T
IEEE 802.3x Flow Control
Protocol:
CSMA/CD
Data Transfer Rate:
Ethernet:
10Mbps (Half-duplex)
20Mbps (Full-duplex)
100Mbps (Half-duplex)
200Mbps (Full-duplex)
Fast Ethernet:
Gigabit Ethernet: 2000Mbps (Full-duplex)
Topology:
Star
Network Cables:
Ethernet:
2-pair UTP Cat. 3,4,5, Unshield Twisted
Pair (UTP) Cable
Fast Ethernet:
Pair (UTP) Cable
2-pair UTP Cat. 5, Unshield Twisted
Gigabit Ethernet: 4-pair UTP Cat. 5, Unshield Twisted
Pair (UTP) Cable
Number of Ports:
Physical and Environmental
DC inputs:
Five(5) 1000BASE-T Gigabit Ethernet ports
7.5V 1.5A
Power Consumption:
Operating Temperature:
Storage Temperature:
Humidity:
8.5 watts maximum
0 °C ~ 40°C
-10°C ~ 70°C
5% ~ 95% RH, non-condensing
171 x 98 x 29 mm (W x H x D)
FCC Class A, CE Marking Class A, VCCI Class A, C-Tick.
Dimensions:
Certification:
Performance
Transmission Method:
RAM Buffer:
Store-and-forward
256K Bytes per device
8K MAC address per device
Filtering Address Table:
Packet Filtering/Forwarding Rate: Full wire speed
MAC Address Learning:
Self-learning, auto-aging
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering your NetComm Product
To ensure that the conditions of your warranty are complied with, please go to the NetComm
web site for quick and easy registration of your product at
Alternatively, you can fill in the Warranty Registration Form and mail it to NetComm Limited,
PO Box 1200, Lane Cove NSW 2066.
Contact Information
If you have any technical difficulties with your product, please do not hesitate to contact
NetComm’s Customer Support Department.
Email:
Fax:
(02) 9424-2010
Web:
C-Tick Mark declaration of conformance
This is to certify that this product complies with the Australian C-Tick standard where
applicable.
Warning
Do not plug a phone jack connector into any of the RJ-45 port. This may damage the switch.
Trademarks and Notices
NetComm™ is a trademark of NetComm Limited. Windows® is a registered trademark of
Microsoft Corporation. Other brand and product names are trademarks or registered trademarks
of their respective holders. Information is subject to change without notice. All rights reserved.
Please note that the images used in this document may vary slightly from those of the actual
product. Specifications are accurate at the time of the preparation of this document but are
subject to change without notice.
Page 16
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Registration Form
Date of Purchase ……….......………………...........……….................................
Name
……….......………………...........……….................................
……….......………………...........……….................................
……….......………………...........……….................................
Company
Address
…………………….........………...........Post Code ......…………...……….
Tel No (
E-mail
)
..............………....……. Fax No ( ) ..............……….........…….
..............………………………....……….................................
The following information is vital for your warranty
Please make sure it’s correct and complete.
Serial No
Model
…….......………………………....………................................
…………….......…...…………....……….................................
Product Type:
Make sure
PC Card
Internal
External
you fill this
section in!
!
Other
I intend to use this product at:
Home
School/College/University
Business
Government Office
Dealer’s Name
...….......………………………....……….................................
Dealer’s Address...….......………………………....……….................................
…………………….........………...........Post Code ......…………...……….
Tel No (
)
..............………....……. Fax No ( ) ...................………....…….
How did you find out about our products?
…………………….............................………………………………………....…………
…………………….............................………………………………………....…………
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Your product has been used for any
purposes other than that for which it is
sold, or in any way other than in strict
accordance with the user manual
supplied;
Product Warranty
The warranty is granted on the following
conditions:
1. This warranty extends to the original
purchaser (you) and is not transferable;
5. Your product has been repaired or
modified or attempted to be repaired or
modified, other than by a qualified person
at a service centre authorised by
NetComm; and,
2. This warranty shall not apply to software
programs, batteries, power supplies,
cables or other accessories supplied in or
with the product;
6. The serial number has been defaced or
altered in any way or if the serial number
plate has been removed.
3. The customer complies with all of the
terms of any relevant agreement with
NetComm and any other reasonable
requirements of NetComm including
producing such evidence of purchase as
NetComm may require;
Limitations of Warranty
The Trade Practices Act 1974 and
4. The cost of transporting product to and
from NetComm's nominated premises is
your responsibility; and,
corresponding State and Territory Fair Trading
Acts or legalisation of another Government
("the relevant acts") in certain circumstances
imply mandatory conditions and warranties
which cannot be excluded. This warranty is
in addition to and not in replacement for such
conditions and warranties.
5. NetComm does not have any liability or
responsibility under this warranty where
any cost, loss, injury or damage of any
kind, whether direct, indirect,
consequential, incidental or otherwise
arises out of events beyond NetComm's
reasonable control. This includes but is
not limited to: acts of God, war, riot,
embargoes, acts of civil or military
authorities, fire, floods, electricity
To the extent permitted by the Relevant Acts,
in relation to your product and any other
materials provided with the product ("the
Goods") the liability of NetComm under the
Relevant Acts is limited at the option of
NetComm to:
outages, lightning, power surges, or
shortages of materials or labour.
■
■
■
Replacement of the Goods; or
Repair of the Goods; or
6. The customer is responsible for the
security of their computer and network at
all times. Security features may be
disabled within the factory default
settings. NetComm recommends that you
enable these features to enhance your
security.
Payment of the cost of replacing the
Goods; or
■
Payment of the cost of having the Goods
repaired.
All NetComm ACN 002 490 486 products have
a standard 12 months warranty from date of
purchase. However some products have an
extended warranty option (refer to
packaging). To be eligible for the extended
warranty you must supply the requested
warranty information to NetComm within 30
days of the original purchase by registering
on-line via the NetComm web site at
The warranty is automatically voided if:
1. You, or someone else, use the product, or
attempts to use it, other than as specified
by NetComm;
2. The fault or defect in your product is the
result of a voltage surge subjected to the
product either by the way of power
supply or communication line, whether
caused by thunderstorm activity or any
other cause(s);
NetComm reserves the right to request proof
of purchase upon any warranty claim.
3. The fault is the result of accidental
damage or damage in transit, including but
not limited to liquid spillage;
Rev.1 - YML671
NP3005 - 5 Port Gigabit Switch
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|