Navman GPS Receiver iCN 700 Series User Manual
USER MANUAL  
iCN 700  
series  
with SmartS™ 2006  
en English - Australia/Canada/United States  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series  
User Manual  
English – Australia / Canada / United States  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2006 Brunswick New Technologies Asia Pte Limited. Navman is a registered trademark of Brunswick New Technologies Asia Pte  
Limited and is used under licence by Navman New Zealand. Navman is part of the Brunswick Group, headquarters Chicago, IL.  
All rights reserved.  
The software contains proprietary information of Navman; it is provided under a licence agreement containing restrictions on use and  
disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited.  
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic,  
mechanical, photocopying, recording or otherwise, without the prior written permission of Navman.  
Back-On-Track, Drive-Away, NavPix, Smartꢀ and Turn-by-Turn are either registered trademarks or trademarks of Brunswick New  
Technologies Asia Pte Limited and are used under licence by Navman New Zealand. All rights reserved.  
Microsoft Windows 2000 and XP SP1, Microsoft Internet Explorer and ActiveSync are either registered trademarks or trademarks of  
Microsoft Corporation in the United States and/or other countries. All rights reserved.  
Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or  
other countries. All rights reserved.  
Location Identifiers © 2005 International Air Transport Association.  
All other trademarks and registrations are the property of their respective owners.  
Published in New Zealand.  
Disclaimer  
Due to continued product development this information may change without notice. Navman does not warrant that this document is  
error-free.  
The screenshots and other presentations shown in this User Manual may differ from the actual screens and presentations generated by  
the actual product. All such differences are minor and the actual product will deliver the described functionality as presented in this User  
Manual in all material respects.  
Compliance  
WARNING This product, its packaging and its components contain chemicals known to the State of California to  
cause cancer, birth defects or reproductive harm. This Notice is being provided in accordance with California’s  
Proposition 65.  
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such  
modifications could void the user’s authority to operate the equipment.  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause  
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired  
operation.  
The software is based in part on the work of the Independent JPEG Group.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Important safety information  
Important safety  
information  
PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT  
IN VEHICLE  
This is the safety alert symbol. It is used to alert you to potential personal injury  
hazards. Obey all safety messages that follow this symbol to avoid possible  
injury or death.  
WARNING indicates a potentially hazardous situation which, if not avoided,  
could result in death or serious injury.  
CAUTION indicates a potentially hazardous situation which, if not avoided, may  
result in minor or moderate injury.  
CAUTION used without the safety alert symbol indicates a potentially hazardous  
situation which, if not avoided, may result in property damage.  
Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle’s safety or make  
it illegal to operate in some jurisdictions.  
Follow all product instructions and all instructions in your vehicle owner’s manual regarding accessories or  
modifications.  
Consult your country’s and/or state’s laws regarding operation of a vehicle with any accessories or modifications.  
It is your sole responsibility to place, secure and use the iCN in a manner that will not cause accidents, personal  
injury or property damage. Always observe safe driving practices.  
Mount the iCN in a position that is secure and does not obstruct the driver’s view.  
Do not mount the iCN in a way that may interfere with the safe operation of the vehicle, the deployment of air bags or  
other safety equipment.  
Do not operate the iCN while driving.  
Before you use your iCN for the first time, familiarize yourself with your device and its operation.  
On main roads, the distance to an exit calculated by the iCN may be further than the distance shown on road signs.  
Road signs show the distance to the start of an exit while your iCN shows the distance to the next intersection, i.e.,  
the end of the exit ramp or road. To prepare to exit a road, always follow distance information on road signs.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Important safety information  
Do not handle the iCN while it is hot. Let the product cool, out of direct sunlight.  
Do not expose the iCN to direct sunlight in an unattended vehicle for prolonged periods. Overheating may damage  
the unit.  
To discourage theft, do not leave the iCN, mounting bracket or any cables in plain view in an unattended  
vehicle.  
Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage.  
Navman disclaims all liability for installation or use of the iCN that causes or contributes to death, injury or  
property damage or that violates any law.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Contents  
Contents  
Important safety information...................................................................................................................5  
Welcome................................................................................................................................................9  
Box contents...................................................................................................................................10  
Typographical conventions .............................................................................................................11  
Getting to know your iCN................................................................................................................12  
Front components.......................................................................................................................12  
Side components........................................................................................................................13  
Top components.........................................................................................................................14  
Bottom components....................................................................................................................14  
Back components.......................................................................................................................15  
Volume .......................................................................................................................................15  
Internal battery............................................................................................................................16  
How do I get started?...........................................................................................................................17  
How do I turn my iCN off?...............................................................................................................19  
What are the main screens that I will use?...........................................................................................20  
How do I navigate with GPS? ..............................................................................................................22  
How do I go from A to B?.....................................................................................................................23  
How do I search for an address? ....................................................................................................24  
Case Study: How do I search for an address?...........................................................................24  
Using the Keyboard screen ........................................................................................................27  
Using the Destination Search screen..........................................................................................27  
How do I create a trip with multiple stops?......................................................................................30  
Case Study: How do I navigate to multiple addresses? .............................................................31  
How do I skip a waypoint during a multi-stop trip?......................................................................36  
How do I search for a landmark or venue?......................................................................................37  
How do I find the nearest gas station?........................................................................................37  
How do I find the nearest parking area? .....................................................................................38  
How do I search for other POIs?.................................................................................................39  
Case Study: How do I search for a Point of Interest?.................................................................39  
How do I view my route?......................................................................................................................43  
3D Map screen ...............................................................................................................................44  
2D Map screen ...............................................................................................................................46  
Next Turn screen ............................................................................................................................48  
Direction List screen .......................................................................................................................49  
What if I miss a turn? ......................................................................................................................50  
How do I save Favorites and My Home?..............................................................................................51  
How do I save a Favorite? ..............................................................................................................51  
How do I navigate to a Favorite?.....................................................................................................52  
How do I navigate to My Home? .....................................................................................................53  
How do I view details of a Favorite?................................................................................................54  
How do I edit the name of a Favorite? ............................................................................................55  
How do I delete a Favorite? ............................................................................................................56  
How do I use the camera? ...................................................................................................................57  
How do I view the Camera screen? ................................................................................................58  
How do I take a photo?...................................................................................................................59  
How do I customize camera preferences?..................................................................................60  
How do I manage my photos? ........................................................................................................61  
Album management ...................................................................................................................61  
Photo management ....................................................................................................................63  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Contents  
How do I save, e-mail or print photos?............................................................................................65  
Via Memory Card........................................................................................................................65  
Via USB cable ............................................................................................................................65  
How do I navigate to a photo location? ...........................................................................................67  
How do I assign a photo to a Favorite?...........................................................................................68  
What else can I do? .............................................................................................................................69  
How do I navigate to a recent location? ..........................................................................................70  
How do I use the Map Menu? .........................................................................................................71  
How do I avoid an area?.................................................................................................................73  
How do I preview a route? ..............................................................................................................74  
How do I view my route statistics? ..................................................................................................76  
How do I view statistics on my current route?.............................................................................76  
How do I view statistics of my trips to date?................................................................................77  
What is SmartST Desktop?..................................................................................................................78  
Can I use SmartꢀDesktop with my computer? ........................................................................79  
What is Microsoft ActiveSync®?..................................................................................................79  
How do I install a map for the first time?.....................................................................................79  
How do I install SmartꢀDesktop on my computer? ......................................................................80  
SmartꢀDesktop features..............................................................................................................81  
Toolbars .....................................................................................................................................83  
How do I keep Smartꢀ up-to-date?..............................................................................................84  
How do I install maps on my iCN? ..................................................................................................85  
How do I install maps from CD? .................................................................................................85  
How do I know which map contains a particular city or town?.....................................................88  
What is a Major Road Network map? .........................................................................................89  
How do I install Custom Points of Interest?..........................................................................................90  
How do I create a Custom POI file?............................................................................................91  
How do I copy a Custom POI file to my iCN?..............................................................................92  
How do I backup my iCN?...............................................................................................................95  
Reference ............................................................................................................................................96  
What can I customize?....................................................................................................................97  
Route Preferences......................................................................................................................98  
Tutorial .....................................................................................................................................101  
System Preferences .................................................................................................................101  
Display Preferences .................................................................................................................105  
POI Preferences.......................................................................................................................108  
Which maps are already installed on my iCN?..............................................................................111  
How do I use a memory card with my iCN? ..................................................................................112  
How do I insert a Memory Card? ..............................................................................................113  
How do I remove a Memory Card?...........................................................................................113  
Street types - US...........................................................................................................................114  
Street types - Canada...................................................................................................................118  
Points of Interest categories..........................................................................................................122  
Specifications................................................................................................................................124  
Support information............................................................................................................................125  
Notes .................................................................................................................................................126  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Welcome  
Welcome  
Thank you for purchasing this Navman iCN. This user manual has been prepared to guide you through the operation  
of your Navman iCN from first set-up through to continuous use, and will help you Drive-Away™ with your iCN,  
straight out of the box. Please read this manual carefully before using your iCN for the first time. Keep this manual  
available for future reference.  
In this section  
Box contents........................................................................................................................................ 10  
Typographical conventions.................................................................................................................. 10  
Getting to know your iCN..................................................................................................................... 12  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Welcome  
Box contents  
Item  
Item  
iCN with GPS receiver  
Mounting bracket  
AC Power pack with power  
cable and plugs  
12V In-vehicle power adaptor  
with power cable  
The number of plugs  
included depends on the  
country of purchase.  
USB cable  
CDs include:  
ƒ
Smartꢀ2005 software,  
including Smartꢀ  
Desktop  
ƒ
ƒ
Map data  
User Manual (PDF) and  
Adobe® Reader®  
The number of discs  
included depends on the  
country of purchase.  
User Manual  
In-Car Installation Guide  
Global Support Information  
Registration card  
GPS Frequently Asked  
Questions guide  
Software Product License and  
Limited Warranty Agreement  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Welcome  
Typographical conventions  
It is important to understand the terms and typographical conventions used in this manual.  
Formatting  
The following kinds of formatting in the text identify special information:  
Convention Type of Information  
Bold  
iCN components or items displayed on screen, including buttons, headings, field names  
and options.  
Italics  
Indicates the name of a screen.  
Icons  
The following icons are used throughout this manual:  
Icon  
Description  
Note  
Important note  
Tip  
Case study  
Warning  
Terms  
The following terms are used throughout this manual to describe user actions.  
Term  
Press  
Description  
Press and release a button quickly.  
Select  
Tap an item in a list or tap a command from a menu.  
Press and release an item displayed on the touch screen.  
Press and hold an item displayed on the touch screen for 2-3 seconds.  
Tap  
Tap and hold  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Welcome  
Getting to know your iCN  
We recommend that you familiarize yourself with the iCN's basic operations.  
Front components  
Component  
Description  
Battery indicator  
Indicates the level of internal battery charge:  
ƒ
ƒ
ƒ
Green - battery full  
Red - battery low  
Orange - battery charging  
For more information, see "Internal battery" on page 16.  
Displays maps and menu options.  
Touch screen  
Tap to select menu options or enter information.  
Displays a list of the nearest gas stations based upon your current location.  
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
Displays a list of the nearest parking areas based upon your current  
location.  
Displays the Main Menu screen. For more information, see "What are the  
main screens that I will use?" on page 20.  
Displays the Go To menu screen. For more information, see "What are the  
main screens that I will use?" on page 20.  
Cycles through the 3D Map, 2D Map, Next Turn and Turn List screens.  
For more information, see "What are the main screens that I will use?" on  
page 20.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Welcome  
Side components  
Component  
Description  
External antenna  
socket  
Connection socket for GPS MCX External Antenna (not included).  
Connection socket for headphones or earphones (not included).  
ꢆ
ꢇ
Slot for memory card. The memory card must be inserted with the label facing  
the front of the iCN. For more information on inserting the memory card, see  
"How do I use a memory card with my iCN?" on page 112.  
Connection socket for AC power-pack or in-vehicle power adaptor.  
ꢈ
Connection socket for USB cable to your computer.  
ꢉ
Volume control  
Rotate up or down to hear a sound test and adjust the volume. Press to mute the  
volume.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Welcome  
Top components  
Component  
ꢊ
Description  
Turns the iCN on or off; when off, the iCN enters a suspended state.  
Turns the camera on. Press to take a photo.  
ꢋ
Bottom components  
Component  
Description  
RESET  
Resets the iCN.  
For more information, see "How do I turn my iCN off?" on page 19.  
BATTERY  
Must be set to ON for normal use. Switching to OFF turns the battery off, which  
saves battery power.  
Hot shoe plate  
Connection plate for the P1 or T1 module.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Welcome  
Back components  
Component  
Description  
Camera  
The camera lens.  
Speaker  
Broadcasts voice commands and warnings. Use the Volume control to adjust.  
GPS receiver  
Receives signals from GPS satellites when lifted out to the horizontal position.  
Volume  
The volume on your iCN can be adjusted either by the volume control on the iCN or by using the three volume  
control buttons on the remote control (may be sold separately). These are described below:  
Volume Control on iCN  
To hear a sound test and adjust the volume, rotate the Volume control up or down. The volume bar displays as  
green.  
To mute the volume, press the Volume control. The volume bar displays as grey, and indicates that the volume is  
muted. To make the volume active, rotate the Volume control up or down. The volume bar displays as green.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Welcome  
Internal battery  
The iCN has an internal battery that, when fully charged, should power the iCN for up to 2.5 hours.  
The battery indicator light on the front of the iCN indicates the level of internal battery charge:  
ƒ
ƒ
ƒ
Green - battery full  
Red - battery low  
Orange - battery charging  
How do I monitor the battery status?  
You can monitor battery power status at the Power screen. For more information, see "Power" on page 103.  
How do I charge the internal battery?  
The Battery Status bar displays Charging while the battery is under charge; when the battery is fully charged, the  
Battery Status bar will display at 100%.  
ƒ
To charge the iCN in a vehicle, plug the vehicle power adaptor into ꢈon the side of the iCN and the other end  
into the vehicle power socket.  
ƒ
To charge the iCN using an electrical wall outlet, plug the AC power cable into ꢈon the side of the iCN and the  
AC power pack into the wall outlet.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I get started?  
How do I get started?  
Before you begin, check if your vehicle is fitted with a heat-reflective or heated windshield. If so, you will need to  
purchase an external antenna for your iCN to receive GPS signals. For more information, see the GPS Frequently  
Asked Questions guide.  
To get started for the first time, complete the following steps:  
Step  
Action  
1
2
3
4
Turn your iCN on.  
Select your preferred language.  
Accept the warning message.  
View the Tutorial.  
1. Turn the iCN on  
a) Position the iCN in your vehicle according to the instructions in the In-Car Installation Guide.  
Please ensure that:  
ƒ
the iCN does not obstruct the driver's view, or interfere with the operation of the vehicle airbags and safety  
devices.  
ƒ
ƒ
the GPS receiver is facing the sky directly above it, to allow it to obtain a GPS fix through the windshield.  
the BATTERY switch is ON.  
The BATTERY switch is GREEN when ON and RED when OFF.  
b) Press ꢊto turn your iCN on.  
The iCN will turn on and display the Language screen.  
If your iCN was last turned OFF via the BATTERY switch, it will automatically turn on when the BATTERY switch is  
switched ON.  
If you have maps installed from multiple continents, you may be prompted to select the maps you would like to load  
before the Language screen is displayed.  
To use maps from a different continent at a later time, you must first reset your iCN, then select a different continent.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I get started?  
2. Select your preferred language  
From the Language screen, tap your preferred language.  
ƒ
ƒ
To prevent the Language screen from displaying on each startup, tap the Show on startup check box.  
You can change your preferred language while using your iCN. For more information, see "Language" on page  
103.  
3. Accept the warning message  
a) The Warning screen will display when you have selected your preferred language.  
Read the Warning message.  
b) To confirm that you have read and understood the message, tap Accept.  
The Tutorial will display.  
4. View the Tutorial  
When you have accepted the Warning message, the Tutorial will display.  
Read the Tutorial:  
ƒ
ƒ
To prevent the Tutorial from displaying again on startup, tap the Show on start-up check box to clear it.  
To move forward through the Tutorial screens, tap ꢌ.  
To revisit the previous screen, tap ꢍ.  
ƒ
You can view the Tutorial again while using your iCN. For more information, see "Tutorial" on page 101.  
When you have finished the Tutorial, the 3D Map screen will display. If you have a GPS fix, your current location will  
be displayed on the map. For information on GPS, see "How do I navigate with GPS?" on page 22.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I get started?  
How do I turn my iCN off?  
To turn your iCN off, press ꢊ.  
Your iCN will enter a suspended state and the screen will turn off. When you turn your iCN on again, it will return to  
the screen you were last viewing.  
Power-saving suspended state  
To save power, your iCN will automatically enter a suspended state after a pre-determined period of time. You can  
change the default suspended state setting at the Power preference screen. For more information, see "Power" on  
page 103.  
If battery power is very low, your iCN will enter a suspended state whether you have set a pre-determined period of  
time or not.  
If you are not going to be using your iCN for an extended period of time, switch the BATTERY switch to OFF to save  
battery power.  
How do I reset my iCN?  
Normally you do not need to reset your iCN; however, should your iCN not turn on or not respond, you can reset it to  
solve the problem.  
To reset your iCN, press the white RESET button on the bottom of your iCN. Your iCN will restart.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What are the main screens that I will use?  
What are the main  
screens that I will use?  
Map screens  
There are four map screens used to view the route to your destination:  
ƒ
ƒ
ƒ
ƒ
3D Map  
2D Map  
Next Turn  
Direction List  
To display the 3D Map screen, or the map screen that you were last viewing, press ꢅ; press again to cycle through  
the map screens.  
ƒ
ƒ
For more information on the map screens, see "How do I view my route?" on page 43.  
For information on using the Map menu from the 3D Map and 2D Map screens, see "How do I use the Map  
Menu?" on page 71.  
Main Menu screen  
The Main Menu screen provides access to all of the iCN's navigation functions.  
To access the Main Menu at any time, press ꢃ; to select a Main Menu option, tap the required icon.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What are the main screens that I will use?  
Go To Menu screen  
The Go To Menu screen is your starting point for specifying a destination. From the Go To Menu screen you can  
navigate to My Home, an address, Point of Interest, Favorite, recent location or set a multi-stop trip.  
To access the Go To Menu at any time, press ꢄ, or tap ꢎfrom the Main Menu screen; to select a Go To Menu  
option, tap the required icon.  
ƒ
For information or setting your destination, see "How do I go from A to B?" on page 23.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I navigate with GPS?  
How do I navigate with  
GPS?  
The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft).  
GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km. Each satellite  
transmits a range of signals which are utilized by GPS receivers, such as your iCN, to determine an exact location.  
Although a GPS receiver can detect signals from up to 12 satellites at any time, only four signals are required to  
provide a position or "GPS fix" (latitude and longitude), for vehicle navigation systems.  
Your iCN receives GPS signals via the GPS antenna. To guarantee the optimum GPS signal strength, ensure your  
iCN is outdoors, or in a vehicle outdoors and the GPS antenna has an unobstructed view of the sky. Your iCN can  
operate in all weather types except snowfall.  
You can view your GPS status at any time from the map screens or the camera screens. The GPS icon ꢏdisplays  
green when a GPS fix is established and red when a GPS fix is unavailable. To indicate the reception strength of a  
GPS fix, ꢏdisplays between one and four green quadrants.  
ƒ
ƒ
To see your GPS status in more detail, see "GPS Status" on page 102.  
For more GPS information, see the GPS Navigation - Frequently Asked Questions guide.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
How do I go from A to B?  
Your iCN is equipped with maps that provide street-level detail for door-to-door navigation, including Points of  
Interest (POIs) such as accommodation, parking areas, gas stations, railway stations and airports.  
When you ...  
Then ...  
know the address of your destination  
use the address-entry wizard to enter the address, see "How  
do I search for an address?" on page 24.  
have multiple stops  
use the Multi-stop Trip Planner screen to enter multiple  
waypoints, see "How do I create a trip with multiple stops?" on  
page 30.  
need to find a named site, feature, landmark search for a Point of Interest, see "How do I search for a  
or public venue  
landmark or venue?" on page 37.  
need to find a gas station  
select from a list of the nearest gas stations, see "How do I  
find the nearest gas station?" on page 37.  
need to find a parking area  
select from a list of the nearest parking areas to your current  
location, see "How do I find the nearest parking area?" on  
page 37.  
WARNING For your safety, enter destination information before you start a journey. Do not enter a destination while  
driving.  
In this section  
How do I search for an address?......................................................................................................... 24  
How do I create a trip with multiple stops?........................................................................................... 30  
How do I search for a landmark or venue? .......................................................................................... 37  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
How do I search for an address?  
Select a destination using the Destination Search, Keyboard and Destination Preview screens, which used together  
form an address-entry wizard.  
This section describes how to use each of these screens and provides a case study to help guide you through setting  
your destination.  
Quick Steps  
1. Open the Destination Search screen  
2. Select the country and state  
3. Search for the city/area  
4. Search for the street  
5. Search for the house number  
6. Tap Go.  
Case Study:  
How do I search for an address?  
This case study will show you how to set your destination by selecting your country, then state, then town or city,  
then street, then house number.  
1. Open the Destination Search screen  
ꢄ ꢐ ꢑ  
The Destination Search screen will display.  
If this is the first time you are setting your destination and you have maps from more than one country installed and  
selected, then the Select Country screen will display instead of the Destination Search screen. Go directly to step 2b.  
The next time you perform this procedure, the Destination Search screen will open as expected.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
2. Select the country and state  
If this is the first time you are setting your destination and you have maps from only one country, but more than one  
state installed and selected, then the Select State screen will display instead of the Destination Search screen.  
The next time you perform this procedure, the Destination Search screen will open as expected.  
If you only have the map of one country installed and selected, that country is selected for your destination by default  
and cannot be changed. Go to step 3.  
a) From the Destination Search screen, tap Change Country or State.  
The Select Country screen will display.  
b) Select a country from the list.  
The Select State screen will display.  
ƒ
If you only have the map of one state installed and selected, that state is selected for your destination by  
default. Go to step 3.  
c) From the Select State screen, select a state from the list.  
The Destination Search screen will display.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
3. Search for the city/area  
a) From the Destination Search screen, tap City/Area.  
The Keyboard screen will display.  
b) Use the Keyboard screen to search for the city or area of your destination.  
The Destination Search screen will display.  
4. Search for the street  
a) From the Destination Search screen, tap Street.  
The Keyboard screen will display.  
There may be multiple matches for a particular street name. Long streets that run through several neighbouring  
areas, and common street names; for example, Main Street, will produce matches that are distinguished by their  
associated city or area name.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
Using the Keyboard screen  
The Keyboard screen will display when you are required to enter text, such as when searching for a street  
name. As you tap each character, the first two matching results will display. Tap ꢒto see more search  
results. Search results will be listed in matching order, with the closest matches appearing at the top of the  
list. A maximum of 99 results will display.  
The Keyboard screen can display in three modes: alphabet, alternate and number/symbol.  
As you select each character, the first two results will display. Tap ꢒto see more search results.  
ƒ
To select a character or a search result, tap the character or search result.  
ƒ
ƒ
ƒ
ƒ
To delete a character, tap ꢓ.  
To display the number/symbol Keyboard screen, tap 123.  
To display the alternate Keyboard screen, tap alt.  
To display the alphabet Keyboard screen, tap abc.  
Using the Destination Search screen  
As you specify each part of the address, it will display at the top of the screen.  
The available options will change to reflect the parts of the address still to be completed.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
b) Use the Keyboard screen to search for the street of your destination. Where there are multiple matches, select  
the city or area that best describes your destination.  
The Destination Search screen will display.  
If house numbers and intersection information are not available for your selected street, the Destination Preview  
screen will display. Go to step 5c.  
5. Search for the house number  
a) From the Destination Search screen, tap House Number.  
The Keyboard screen will display.  
If house numbers are available, but not the one that you require, you may have to choose the same street in a  
neighbouring area. Go to step 4.  
If the House Number option is not displayed at all, house numbers are not available for your selected section of the  
street. Tap Go to Centre of Street to display the Destination Preview screen. Go to step c.  
b) Use the Keyboard screen to search for the house number of your destination.  
The Destination Preview screen will display.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
c) Complete one of the following:  
Please ensure that the route preferences are applicable for the route that you have specified, before you tap Go.  
If you want to ...  
Then ...  
calculate the route and open the 3D Map  
tap Go.  
screen  
Your route is calculated; the 3D Map screen will display.  
select a more precise location by pointing  
display the geographical details  
tap the map to switch to the main map view.  
tap Details.  
The Destination Details screen will display.  
ƒ
tap Save.  
The New Favorite screen will display.  
save the destination as My Home  
save the destination as a Favorite  
ƒ
ƒ
Tap Save as Home.  
tap Save.  
The New Favorite screen will display.  
ƒ
Tap Save as Favorite.  
display Route Preferences  
change your destination  
tap Preferences.  
The Route Calculation screen will display.  
press ꢍ.  
The Destination Search screen will display.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
How do I create a trip with  
multiple stops?  
You can use the Multi-stop Trip Planner screen to set multiple waypoints for your trip. Your route will be calculated to  
go via each of these points in the specified order.  
Waypoints can be added via the Multi-stop Trip Planner screen or by selecting Location from the pop-up Map menu  
on the 2D Map or 3D Map screen, then Add to Trip. You can save up to 200 multi-stop trips, each with up to 15  
waypoints.  
Waypoints added, updated or deleted after a multi-stop trip has commenced will not affect the current route.  
Quick Steps  
1. Start your Multi-stop Trip  
2. Select the country and state  
3. Search for the city/area  
4. Search for the street  
5. Search for the house number  
6. Tap Go.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
Case Study:  
How do I navigate to multiple  
addresses?  
This case study will show you how to set a multi-stop trip by selecting your country, then state, then town or city, then  
street, then house number for each waypoint.  
1. Start your multi-stop trip  
ꢄ ꢐ ꢔ  
The Multi-stop Trip Planner screen will display.  
a) Tap Add.  
The Add to Trip Menu will display.  
b) Tap Address or POI.  
The Destination Search screen will open.  
You can also add waypoints using Favorites, recent destinations and nearest Points of Interest.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
2. Select the country and state  
If this is the first time you are setting your destination and you have maps from only one country, but more than one  
state installed and selected, then the Select State screen will display instead of the Destination Search screen.  
The next time you perform this procedure, the Destination Search screen will open as expected.  
If you only have the map of one country installed and selected, that country is selected for your destination by default  
and cannot be changed. Go to step 3.  
a) From the Destination Search screen, tap Change Country or State.  
The Select Country screen will display.  
b) Select a country from the list.  
The Select State screen will display.  
ƒ
If you only have the map of one state installed and selected, that state is selected for your destination by  
default. Go to step 3.  
c) From the Select State screen, select a state from the list.  
The Destination Search screen will display.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
3. Search for the city/area  
a) From the Destination Search screen, tap City/Area.  
The Keyboard screen will display.  
b) Use the Keyboard screen to search for the city or area of your destination.  
The Destination Search screen will display.  
4. Search for the street  
a) From the Destination Search screen, tap Street.  
The Keyboard screen will display.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
b) Use the Keyboard screen to search for the street of your destination.  
The Destination Search screen will display.  
If house numbers and intersection information are not available for your selected street, the Waypoint Preview screen  
will display. Go to step 5b.  
5. Search for the house number  
a) From the Destination Search screen, tap House Number.  
The Keyboard screen will display.  
If the House Number option is not displayed, house numbers are not available for your selected street. To display  
the Destination Preview screen, tap Go to centre of street. Go to step c.  
b) Use the Keyboard screen to search for the house number of your destination.  
The Waypoint Preview screen will display.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
c) Tap Add.  
The destination is automatically saved and the Multi-Stop-Trip Planner screen will display.  
d) Complete one or more of the following:  
If you want to ...  
Then ...  
ƒ
tap Add.  
add another waypoint  
The Destination Search screen will display.  
Waypoints added after a multi-stop trip has  
commenced will not be included in the  
current route.  
ƒ
Return to step 3.  
ƒ
ƒ
tap Go.  
calculate the route  
The Multi Stop Trip Preview screen will display.  
Tap Go.  
The Map screen will display the calculated route.  
ƒ
ƒ
ƒ
ƒ
tap a destination point to move.  
The Waypoint Preview screen will display.  
change the order of your waypoints  
Tap Move up or Move down.  
The Multi-stop Trip Planner screen will display.  
tap a destination point.  
The Waypoint Preview screen will display.  
display the geographical details of a waypoint  
Tap Details.  
The Waypoint Details screen will display.  
delete all waypoints  
delete one waypoint  
tap Clear.  
ƒ
ƒ
ƒ
ƒ
tap a destination point to delete.  
The Waypoint Preview screen will display.  
Tap Delete.  
The Multi-stop Trip Planner screen will display.  
tap Save.  
The New Favorite screen will display.  
save the multi-stop trip as a Favorite  
Tap Save as Favorite.  
The Favorite will save and the Multi-Stop Trip Planner  
screen will display.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
How do I skip a waypoint during a multi-  
stop trip?  
You can modify a multi-stop trip at any time from the Multi-stop Trip Planner screen, however if you have already  
commenced a trip, changes will not affect the current route:  
ꢄ ꢐ ꢔ  
To skip a waypoint during a multi-stop trip, complete the following:  
1. Tap the map to display the cross-hairs.  
The Map Menu will display.  
2. Tap Route, then Skip Waypoint.  
The next waypoint will be skipped and the route recalculated to the following waypoint.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
How do I search for a landmark  
or venue?  
Setting a Point of Interest (POI) as your destination  
A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are  
grouped by type, such as gas stations, parks and museums.  
How do I find the nearest gas  
station?  
You can press  
ꢁ
As POIs are grouped by category, including gas stations, your iCN will display a list of the nearest gas stations based  
upon your current location.  
to quickly find the nearest gas station.  
a) Press  
ꢁ
.
The Select POI screen will display, showing a list of the nearest gas stations based upon your current location.  
The nearest appears at the top of the list.  
b) Select a gas station from the list.  
The Destination Preview screen will display.  
c) Tap Go.  
Your route is calculated; the 3D Map screen will display.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
How do I find the nearest parking  
area?  
You can press  
ꢂ
This case study will show you how to set your destination by locating and selecting a parking area Point of Interest  
(POI).  
to quickly find the nearest parking area.  
As POIs are grouped by category, including parking areas, the iCN will show you a list of the nearest parking areas  
based upon your current location.  
a) Press  
ꢂ
.
The Select POI screen will display, showing a list of the nearest parking areas based upon your current  
location. The nearest appears at the top of the list.  
b) Select a parking area from the list.  
The Destination Preview screen will display.  
c) Tap Go.  
Your route is calculated; the 3D Map screen will display.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
How do I search for other POIs?  
Select a POI destination using the Destination Search, Keyboard and Destination Preview screens, which used  
together form a POI-entry wizard.  
This section describes how to use each of these screens and provides a case study to help guide you through setting  
your POI.  
Quick Steps  
1. Open the Destination Search screen  
2. Select the country and state  
3. Select the type of POI  
4. Tap Go.  
Case Study:  
How do I search for a Point of  
Interest?  
This case study will show you how to set your destination by selecting a Point of Interest (POI).  
1. Open the Destination Search screen  
ꢄ ꢐ ꢑ  
The Destination Search screen will display.  
If this is the first time you are setting your destination and you have maps from more than one country installed and  
selected, then the Select Country screen will display instead of the Destination Search screen. Go directly to step 2b.  
The next time you perform this procedure, the Destination Search screen will open as expected.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
2. Select the country and state  
If this is the first time you are setting your destination and you have maps from only one country, but more than one  
state installed and selected, then the Select State screen will display instead of the Destination Search screen.  
The next time you perform this procedure, the Destination Search screen will open as expected.  
If you only have the map of one country installed and selected, that country is selected for your destination by default  
and cannot be changed. Go to step 3.  
a) From the Destination Search screen, tap Change Country or State.  
The Select Country screen will display.  
b) Select a country from the list.  
The Select State screen will display.  
ƒ
If you only have the map of one state installed and selected, that state is selected for your destination by  
default. Go to step 3.  
c) From the Select State screen, select a state from the list.  
The Destination Search screen will display.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
3. Select the type of POI  
To narrow the search for a type of POI, you can first search by Area.  
a) From the Destination screen, tap Point of Interest.  
The Select POI screen will display.  
b) Select a POI type from the list.  
The Keyboard screen will display.  
c) Use the Keyboard screen to find the POI.  
The Destination Preview screen will display.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I go from A to B?  
d) Complete one of the following:  
Please ensure that the route preferences are applicable for the route that you have specified, before you tap Go.  
If you want to ...  
Then ...  
calculate the route and open the 3D Map  
tap Go.  
screen  
Your route is calculated; the 3D Map screen will display.  
select a more precise location by pointing  
display the geographical details  
tap the map to switch to the main map view.  
tap Details.  
The Destination Details screen will display.  
ƒ
tap Save.  
The New Favorite screen will display.  
save the destination as My Home  
save the destination as a Favorite  
ƒ
ƒ
Tap Save as Home.  
tap Save.  
The New Favorite screen will display.  
ƒ
Tap Save as Favorite.  
display Route Preferences  
change your destination  
tap Preferences.  
The Route Calculation screen will display.  
press ꢍ.  
The Destination Search screen will display.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I view my route?  
How do I view my route?  
Once a route has been calculated, the 3D Map screen will display. You will be directed to your destination by vocal  
and visual instructions.  
You can view your route in several ways by pressing ꢅto cycle through the map screens.  
In this section  
3D Map screen .................................................................................................................................... 44  
2D Map screen .................................................................................................................................... 46  
Next Turn screen................................................................................................................................. 48  
Direction List screen ............................................................................................................................ 49  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I view my route?  
3D Map screen  
The 3D Map screen is oriented to your travelling direction.  
To view the 3D Map screen when a route has been calculated, press ꢅto cycle through the screens.  
ƒ
ƒ
Tap and drag the screen, to move across the map.  
Tap and hold the map, to view Map menu. For more information, see "How do I use the Map Menu?" on  
page 71.  
Item  
Description  
Direction of next turn  
The direction of your next turn.  
To repeat the voice prompt of your next turn, tap the turn arrow.  
Distance to next turn  
Next instruction  
The distance to your next turn.  
The direction and name of the street to turn in to.  
When you cycle through the Information options, a function description  
will display briefly at the top of the screen.  
Next turn arrow  
Your next turn is highlighted in a different colour from future turns.  
The default colour of your next turn is green, but will depend on the  
colour theme you are using.  
Current position  
Status bar  
Your current position is marked with ꢕ.  
Displays one of the following:  
ƒ
ƒ
ƒ
The name of the street you are located on  
Speed warnings  
Active POIs.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I view my route?  
Item  
Description  
Information  
Displays one of the following options:  
ƒ
ƒ
ƒ
ƒ
ƒ
Time  
km/h or mph (Speed)  
TTG (Time to Go)  
DTG (Distance to Go)  
ETA (Estimated Time of Arrival).  
Tap to cycle through the options.  
During a Multi-trip journey, Time to Go, Distance to Go and ETA will  
display as: Time to Waypoint, Distance to Waypoint and ETA at  
Waypoint.  
Route  
Your current route is highlighted.  
Cancels your current route  
Cancel route  
Zoom  
To view zoom options, tap ꢖ.  
ƒ
To display a smaller area in greater detail, tap ꢗor scroll  
down.  
ƒ
To display a larger area in less detail, tap ꢘor scroll up.  
Compass and GPS  
information  
Displays one of the following options:  
ƒ
Green Quadrants - A valid GPS signal is being used to fix your  
position; displays between one and four quadrants to indicate  
the strength of the signal.  
ƒ
ƒ
Red Circle - No GPS signal.  
Compass heading.  
Tap to cycle through the options; tap and hold to display the GPS  
Status screen.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I view my route?  
2D Map screen  
The 2D Map screen shows your current position (if a GPS fix is active) and surrounding street names. If a route has  
been calculated, the route and turns are highlighted. The 2D Map screen is displayed Course Up, unless the Map  
Display preferences are set to North.  
To view the 2D Map screen, press ꢅto cycle through the screens.  
ƒ
ƒ
Tap and drag the screen, to move across the map.  
Tap and hold the map, to view Map menu. For more information, see "How do I use the Map Menu?" on  
page 71.  
Item  
Description  
Direction of next turn  
The direction of your next turn.  
To repeat the voice prompt of your next turn, tap the turn arrow.  
Distance to next turn  
Next instruction  
The distance to your next turn.  
The direction and name of the street to turn in to.  
When you cycle through the Information options, a function description  
will display briefly at the top of the screen.  
Current position  
Scale bar  
Your current position is marked with ꢕ.  
Displays map scale.  
Status bar  
Displays one of the following:  
ƒ
ƒ
ƒ
The name of the street you are located on  
Speed warnings  
Active POIs.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I view my route?  
Item  
Description  
Information  
Displays one of the following options:  
ƒ
ƒ
ƒ
ƒ
ƒ
Time  
km/h or mph (Speed)  
TTG (Time to Go)  
DTG (Distance to Go)  
ETA (Estimated Time of Arrival).  
Tap to cycle through the options.  
During a Multi-trip journey, Time to Go, Distance to Go and ETA will  
appear as: Time to Waypoint, Distance to Waypoint and ETA at  
Waypoint.  
Route  
Your current route is highlighted.  
Cancel route  
Next turn arrow  
Cancels your current route.  
Your next turn is highlighted in a different colour to future turns.  
The default colour of your next turn is green, but will depend on the  
colour theme you are using.  
Zoom  
To view zoom options, tap ꢖ.  
ƒ
To display a smaller area in greater detail, tap ꢗor scroll  
down.  
ƒ
To display a larger area in less detail, tap ꢘor scroll up.  
Compass and GPS  
Information  
Displays one of the following options:  
ƒ
Green Quadrants - A valid GPS signal is being used to fix your  
position; displays between one and four quadrants to indicate  
the strength of the signal.  
ƒ
ƒ
Red Circle - No signal.  
Compass heading.  
Tap to cycle through the options; tap and hold to display the GPS  
Status screen.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I view my route?  
Next Turn screen  
The Next Turn screen displays information that you need for the next turn, the direction of the turn and the distance  
to the turn. A route must first have been calculated, for this screen to be available.  
To view the Next Turn screen when a route has been calculated, press ꢅto cycle through the screens.  
Item  
Description  
Next instruction  
The direction and name of the street to turn in to.  
When you cycle through the Information options, a function description  
will display briefly at the top of the screen.  
Direction of next turn  
Scale bar  
The direction of your next turn.  
Displays map scale.  
Distance to next turn  
Status Bar  
The distance to your next turn.  
Displays one of the following:  
ƒ
ƒ
ƒ
The name of the street you are located on  
Speed warnings  
Active POIs.  
Information  
Displays one of the following options:  
ƒ
ƒ
ƒ
ƒ
ƒ
Time  
km/h or mph (Speed)  
TTG (Time to Go)  
DTG (Distance to Go)  
ETA (Estimated Time of Arrival).  
Tap to cycle through the options.  
During a Multi-trip journey, Time to Go, Distance to Go and ETA will  
appear as: Time to Waypoint, Distance to Waypoint and ETA at  
Waypoint.  
Cancel Route  
Cancels your current route.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I view my route?  
Item  
Description  
Map of next turn  
A map of your next turn.  
Current position  
Your current position is marked with ꢕ; if visible.  
Compass and GPS  
Information  
Displays one of the following options:  
ƒ
Green Quadrants - A valid GPS signal is being used to fix your  
position; displays between one and four quadrants to indicate  
the strength of the signal.  
ƒ
ƒ
Red Circle - No signal.  
Compass heading.  
Tap to cycle through the options; tap and hold to display the GPS  
Status screen.  
Direction List screen  
The Direction List screen displays the next four turns of your route, the turn direction, the street name and the  
distance to the turn. You can view all the turns in the list, using the scroll bar. A route must first have been calculated  
for this screen to be available.  
To view the Direction List screen when a route has been calculated, press ꢅto cycle through the screens.  
Item  
Description  
Direction of turn  
The direction of the turn. Your next turn is highlighted.  
Distance to turn  
Instruction  
The distance to your next turn. Your next turn is highlighted.  
The direction and name of the street to turn in to. Your next turn is  
highlighted.  
Next turn (highlighted)  
Upcoming turns  
Your next turn is highlighted at the top of the list.  
The direction and distance of upcoming turns.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I view my route?  
Item  
Description  
Status Bar  
The name of the street you are located on.  
Information  
Displays one of the following options:  
ƒ
ƒ
ƒ
ƒ
ƒ
Time  
km/h or mph (Speed)  
TTG (Time to Go)  
DTG (Distance to Go)  
ETA (Estimated Time of Arrival).  
Tap to cycle through the options.  
During a Multi-trip journey, Time to Go, Distance to Go and ETA will  
appear as: Time to Waypoint, Distance to Waypoint and ETA at  
Waypoint.  
Position Indicator  
Cancel Route  
Scroll Bar  
Displays your position in the Direction List screen.  
Cancels your current route.  
Allows you to view each turn by scrolling through the list.  
Displays one of the following options:  
Compass and GPS  
Information  
ƒ
Green Quadrants - A valid GPS signal is being used to fix your  
position; displays between one and four quadrants to indicate  
the strength of the signal.  
ƒ
ƒ
Red Circle - No signal.  
Compass heading.  
Tap to cycle through the options; tap and hold to display the GPS  
Status screen.  
What if I miss a turn?  
Back-On-Track™ Automatic Rerouting  
Your route is re-directed if you make a wrong turn. A message informing you that your route is being re-calculated  
will display at the top of the screen. The Information button will display the percentage complete status of the route  
re-calculation.  
To cancel a route re-calculation tap ꢙ. A warning will display, asking you to confirm the cancellation. If confirmed,  
both the re-calculation and your current route will be cancelled.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I save Favorites and My Home?  
How do I save Favorites  
and My Home?  
You can save up to 200 destinations as Favorites, one of which can be saved as My Home. My Home can be any  
designated Favorite, but we recommend that it is your home or other common destination.  
You can save a Favorite from the Destination Preview screen after searching for an address, or from the Maps Menu  
on the 3D or 2D Map screens. For more information, see "How do I use the Map Menu?" on page 71.  
Can I assign a photo to a Favorite?  
You can assign a photo to any of your existing Favorites. For more information, see "How do I assign a photo to a  
Favorite?" on page 68.  
How do I save a Favorite?  
Search for an address until the Destination Preview screen is displayed.  
1. Tap Save.  
The New Favorite screen will display.  
2. To change the name of the Favorite, tap ꢚ. The Keyboard screen will display.  
ƒ
After you have entered a name for the Favorite, tap OK.  
The New Favorite screen will display.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I save Favorites and My Home?  
3. Complete one of the following:  
If you want to ...  
Then ...  
save as a Favorite  
tap Save as Favorite.  
The Favorite is saved. The Favorite Preview screen will  
display.  
save as My Home  
tap Save as My Home.  
The Favorite is saved as My Home. The My Home Preview  
screen will display.  
How do I navigate to a Favorite?  
ꢃ ꢐ ꢛ  
1. Tap the Favorite destination you want to travel to.  
The Favorite Preview screen will display.  
2. Tap Go.  
The route is calculated and displayed on the Map screen.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I save Favorites and My Home?  
How do I navigate to My Home?  
If you have not set an address as My Home, the first time you try to navigate to My Home you will be prompted to  
search for an address using the address-entry wizard.  
Option 1 - From the Go To Menu  
ꢄ ꢐ ꢜ  
The route is calculated and displayed on the Map screen.  
Option 2 - From the Favorite Destinations screen  
ꢃ ꢐ ꢛ  
1. From the My Favorites screen, select My Home.  
The My Home Preview screen will display.  
2. To navigate to My Home, tap Go.  
The route is calculated and displayed on the Map screen.  
Option 3 - Using the remote control  
You can navigate to My Home by pressing ꢝon the remote control (may be sold separately).  
1. Press ꢝto display the My Home Preview screen.  
2. Press ꢝagain, to calculate the route and display the 3D Map screen.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I save Favorites and My Home?  
How do I view details of a  
Favorite?  
ꢃ ꢐ ꢛ  
1. From the My Favorites screen, select a Favorite.  
The Favorite Preview screen will display.  
2. Tap Details.  
The Favorite Details screen will display.  
3. Complete one of the following:  
If you want to ...  
Then ...  
rename the Favorite or save the Favorite as tap Save.  
your Home  
The Edit Favorite screen will display.  
set the route Preferences before navigating tap Prefs.  
to your Favorite  
The route Preference screen will display.  
navigate to your Favorite or My Home  
tap Go.  
The route is calculated and displayed on the Map screen.  
return to the Favorite Preview screen  
tap ꢍ.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I save Favorites and My Home?  
How do I edit the name of a  
Favorite?  
ꢃ ꢐ ꢛ  
1. From the My Favorites screen, select a Favorite to edit.  
The Favorite Preview screen will display.  
2. Tap Edit.  
The Edit Name screen will display.  
3. To edit the name of the Favorite, tap ꢚ.  
ƒ
After you have edited the Favorite name, tap OK.  
The Edit Name screen will display.  
4. Complete one of the following:  
If you want to ...  
Then ...  
rename the Favorite  
tap Save.  
The Favorite is saved. The Favorite Preview screen will  
display.  
save as My Home  
tap Save as My Home.  
The Favorite is saved as My Home. The My Home Preview  
screen will display.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I save Favorites and My Home?  
How do I delete a Favorite?  
ꢃ ꢐ ꢛ  
1. From the My Favorites screen, select a Favorite to delete.  
The Favorite Preview screen will display.  
2. Tap Delete.  
The Favorite is deleted. The My Favorites screen will display.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I use the camera?  
How do I use the  
camera?  
Your iCN has an inbuilt camera with NavPix technology, which allows you to take photos and save them as a  
geographical location on the navigation maps. This enables you to navigate directly to where the photo was taken.  
Photos can be stored in an Album on the iCN's hard drive or a memory card and viewed in full screen mode.  
In this section  
How do I view the Camera screen? ..................................................................................................... 58  
How do I take a photo?........................................................................................................................ 59  
How do I manage my photos? ............................................................................................................. 61  
How do I save, e-mail or print photos?................................................................................................. 65  
How do I navigate to a photo location?................................................................................................ 67  
How do I assign a photo to a Favorite?................................................................................................ 68  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I use the camera?  
How do I view the Camera  
screen?  
The Camera screen allows you to take photos and access the camera preferences.  
To view the Camera screen, press ꢋon top of the iCN.  
ƒ
You can also access the Camera screen from the Main Menu; tap ꢞ.  
Pressing ꢋwill not take a photo until you are already in the Camera screen.  
Element  
ꢟ
Description  
Captures the photo.  
Displays the Album screen.  
ꢠ
Returns you to the screen you last viewed.  
ꢍ
Viewfinder  
Allows you to frame the image within the Viewfinder.  
Displays the current lighting setting.  
Tap to view lighting options.  
ꢡ
Displays the brightness setting.  
Tap to view brightness options.  
ꢢ
Indicates if GPS information is available.  
ꢣ
When the Camera screen is displayed, all buttons on the iCN except ꢋbecome inactive. This ensures you remain  
in the Camera screen, even if other buttons are pressed accidentally.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I use the camera?  
How do I take a photo?  
The Camera screen must be displayed before you can take a photo.  
1. To view the Camera screen, press ꢋon top of the iCN.  
ƒ
You can also access the Camera screen from the Main Menu; tap ꢞ.  
2. When the Camera screen is open, an image of whatever the camera is focused on will display in the  
Viewfinder.  
Before you take a photo you can customize the lighting and brightness settings. For more information, see "How do I  
customize camera preferences?" on page 60.  
3. When you are satisfied with the image displayed in the Viewfinder, press ꢋto take the photo.  
ƒ
You can also tap ꢟto take the picture.  
4. The captured image will preview in the Viewfinder for two seconds before it is automatically saved in your  
Album on the iCN's hard drive.  
If the Camera screen is inactive for more than two minutes it will revert to the Main Menu screen.  
GPS fix  
The GPS icon indicates whether the iCN has a GPS fix and the strength of the signal. When the iCN has a GPS fix  
and a picture is taken, location co-ordinates are linked to the picture. The co-ordinates must be available for you to  
save a picture as a Favourite destination. Location co-ordinates are displayed on the Photo Details screen. For more  
information, see "Photo management" on page 63.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I use the camera?  
How do I customize camera preferences?  
The Camera has lighting and brightness settings which you can customise before taking a photo.  
Lighting options  
1. To view the Camera screen, press ꢋ.  
2. From the Camera screen, tap ꢡ.  
The range of lighting options will display.  
Setting Description  
For outdoor use, in bright sunlight  
ꢤ
For outdoor use, with cloud cover  
ꢥ
For indoor use, under normal lighting  
ꢦ
For indoor use, under fluorescent lighting  
ꢧ
For night use; gives longer exposure time to enhance picture quality  
ꢨ
Automatically selects the most suitable setting for the conditions  
ꢡ
3. Tap your preferred lighting option.  
Your selection will be saved.  
Brightness options  
The brightness control is adjustable to one of six levels.  
1. To view the Camera screen, press ꢋ.  
2. From the Camera screen, tap ꢢ.  
The range of brightness options will display.  
3. Select one of the six levels to set the brightness of a photo.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I use the camera?  
How do I manage my photos?  
Album management  
The Album stores all your photos and displays them as thumbnails. You can store photos in the Album on the iCN's  
hard drive or on your memory card.  
When you take a photo, it is always saved to the Album on the iCN's hard drive.  
1. Press ꢋto view the Camera screen.  
2. From the Camera screen tap ꢠ.  
The Album screen will display.  
Element  
Description  
Displays the Album on the hard drive.  
ꢩ
Displays the Album on the memory card. (Optional)  
ꢪ
Copy  
Copies photos from the hard drive to the memory card or vice versa.  
Deletes photos from the hard drive or memory card.  
Delete  
Tap to return to the Viewfinder.  
ꢍ
Photo  
Displays photos in the photo album on the hard drive or memory card.  
Tap to display Photo Details screen.  
Scroll bar  
Allows you to scroll through thumbnail view of photos.  
Displays if GPS co-ordinates are associated with a photo.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I use the camera?  
How do I copy photos between Albums?  
Photos can be copied from the Album on the iCN's hard drive to your memory card and vice versa.  
The first time a photo is copied to your memory card, a folder will be created on the memory card called My Pictures.  
For more information, see "How do I use a memory card with my iCN?" on page 112.  
1. From the Album screen, select the Album you want to view.  
2. Tap and hold, then drag across the screen to select the photo(s) you want to copy.  
As a photo is selected, a red border will appear around it.  
3. To cancel a selection, tap and drag over the photo(s) again.  
4. When you have finished the selection, tap Copy.  
5. A warning screen will display, asking you to confirm or cancel the procedure.  
If confirmed, the photo(s) will be copied to the other Album.  
You can also copy a single photo from the Photo Details screen. For more information, see "Photo management" on  
page 63.  
How do I view the Album on my Memory Card?  
The icon displayed at the top left hand corner of the Album screen, indicates which Album you are currently viewing.  
To change Albums, tap the icon to reveal both options (hard drive & memory card) then select the required Album.  
For information on using a memory card with your iCN, see "How do I use a memory card with my iCN?" on  
page 112.  
How do I delete photos from an album?  
Photos can be deleted from the Album on the iCN's hard drive or your memory card.  
When a photo has been saved as a Favourite destination, you will not delete the Favourite if you subsequently  
remove the photo from your Album.  
1. From the Album screen, select the Album you want to view.  
2. Tap and hold, then drag across the screen to select the photos you want to delete.  
As a photo is selected, a red border will appear around it.  
3. To cancel a selection, tap and drag across the photo again.  
4. When you have finished the selection, tap Delete.  
5. A warning screen will display, asking you to confirm or cancel the procedure.  
If confirmed, the photos will be deleted from the Album.  
You can also delete a single photo from the Photo Details screen. For more information, see "Photo management" on  
page 63.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I use the camera?  
Photo management  
The Photo Details screen displays information about your photo. To display the Photo Details screen, tap any photo  
in your Album.  
Element  
Description  
Go to  
Displays the Destination Preview screen, ready for you to navigate to the  
location.  
The Go To button is only available if GPS co-ordinates are associated  
with the photo.  
Assign  
Allows you to assign a photo to an existing Favourite; or create a new  
Favourite, if GPS co-ordinates are associated with the photo.  
Copy  
Copies a photo from the hard drive to your memory card and vice versa.  
Deletes a photo from the hard drive or your memory card.  
The title of the photo; tap Edit to add a title or edit the existing title.  
Tap to return to your Album.  
Delete  
Photo Title  
ꢍ
Show on Map  
When selected, displays an icon on the map at the location the photo was  
taken.  
Photo  
A thumbnail of the photo.  
Tap to display the photo in full-screen.  
Tap and drag to scroll through photos stored in your Album.  
Scroll Bar  
Edit  
Allows you to create a title for a photo using the Keyboard screen.  
Time / Date and  
Location Co-ordinates  
Displays the time and date the photo was taken; also displays the latitude  
and longitude co-ordinates, if GPS co-ordinates are associated with the  
photo.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I use the camera?  
How do I view a photo in full-screen?  
1. From the Photo Details screen, tap the thumbnail of the photo.  
The photo will appear in full-screen.  
2. Complete the following:  
If you want to ...  
zoom into the photo  
Then ...  
tap ꢫ.  
zoom out of the photo  
tap ꢬ.  
rotate the photo  
tap ꢭ.  
The photo will rotate 90 degrees counterclockwise each time  
ꢭis tapped; the photo is saved at the new angle.  
view parts of the photo not displayed on-  
screen  
tap and hold the image, then drag across the screen.  
How do I create a title for a photo?  
A title can be given to your photo or an existing title can be renamed. The title can be a maximum of 34 characters.  
1. From the Photo Details screen, tap Edit.  
The Edit Description screen will display.  
2. Tap each character as required.  
The title will appear at the top of the screen.  
3. When the title is complete, tap OK.  
The Photo Details screen will display, with the new title under the photo.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I use the camera?  
How do I save, e-mail or print  
photos?  
To save, e-mail or print photos, you must first transfer the photos to your computer; there are two ways to do this:  
ƒ
ƒ
Copy the photos from a memory card to your computer via a memory card reader or memory card drive, or  
Copy the photos directly from your iCN to your computer via the enclosed USB cable.  
Via Memory Card  
Photos can be copied from the Album on your iCN to the My Pictures folder on your memory card. The first time a  
photo is copied to the memory card, the following folders will be created:  
E:\My Documents\My Pictures, where “E” is the letter assigned to your memory card drive or reader.  
All photos in My Pictures are part of the same photo album and can be viewed on your iCN. For more information on  
viewing albums and copying photos between albums, see "Album management" on page 61.  
Once a photo has been copied to the photo album on your memory card, you can then use the card with your  
computer to save, e-mail or print the photos, or take the memory card to a digital photo retailer for printing.  
Via USB cable  
Before you can copy photos from your iCN to your computer, you must first ensure that you have Microsoft  
ActiveSync installed.  
®
What is Microsoft ActiveSync ?  
Microsoft ActiveSync is used to establish a connection between your iCN and your computer.  
After it is installed, ActiveSync will run in the Windows System Tray/Notification Area when you start Windows.  
ActiveSync will activate when your iCN is connected to your computer.  
For more information on ActiveSync, search for "ActiveSync" at www.microsoft.com.  
How do I install ActiveSync on my computer?  
Microsoft ActiveSync is automatically installed on your computer when you install SmartꢀDesktop. For more  
information, see "How do I install SmartꢀDesktop on my computer?" on page 80.  
If you will not be installing SmartꢀDesktop on your computer, you can install ActiveSync 3.7.1 by completing the  
following:  
1. Close all open programs on your computer.  
2. Insert the SmartꢀApplication Installer CD into your computer CD drive.  
The SmartꢀDesktop installer will start.  
ƒ
If your computer does not automatically launch the CD, start the installation manually:  
Start > Run.  
Type D:\Install.exe where “D” is the letter assigned to your CD drive, then click OK.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I use the camera?  
3. Select your preferred language for SmartꢀDesktop.  
4. Click Install Microsoft ActiveSync and follow the screen prompts.  
How do I copy photos from my iCN to my computer via the  
USB cable?  
CAUTION Ensure that Microsoft ActiveSync is installed on your computer before connecting the USB cable to your  
computer.  
1. Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub); plug the small  
end into the USB Socket (ꢉ) on the side of your iCN.  
Where possible, plug the USB cable into a USB port at the back of your computer.  
2. Plug the small end of the AC Power Pack cable into the ꢈsocket on the side of your iCN; plug the other end  
into the mains.  
3. If your iCN is turned off, press ꢊ.  
Your iCN will turn on.  
4. When the following screen displays on your iCN, click Next:  
Microsoft ActiveSync will synchronize with your iCN.  
5. In the Microsoft ActiveSync window, click  
.
Windows Explorer will open, displaying the contents of your iCN.  
CAUTION Do not delete, move or edit any files on your iCN other than photos, as it may prevent your iCN from  
functioning properly.  
6. Open the following folder to display a list of your photos:  
My Documents > My Pictures  
You cannot view or preview photos until they have been copied to your computer.  
7. Copy the photos in the My Pictures folder to your computer.  
You can now view, e-mail or print the photos.  
When the photos have been successfully copied to your computer, it is then safe to delete the photos from your iCN  
My Pictures folder.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I use the camera?  
How do I navigate to a photo  
location?  
To navigate to a photo location, a GPS fix must have been available when the photo was taken.  
ꢋ ꢐ ꢠ  
1. From the Album screen, tap a photo.  
The Photo Details screen will display.  
2. From the Photo Details screen, tap Go to.  
The Destination Preview screen will display.  
3. Complete the following:  
If you want to ...  
Then ...  
navigate to your destination  
tap Go, the 3D Map screen will display your route.  
tap Preferences, the Route Preference screen will display.  
tap Details, the Destination Details screen will display.  
customise your route preferences  
view your destination details  
ƒ
ƒ
tap Save, the New Favorite screen will display.  
save a photo as a Favorite or as My Home  
tap ꢚ.  
The Keyboard screen will display. Enter a name for your  
Favorite or My Home, then tap OK.  
ƒ
to create a new My Home destination, tap Save as  
Home; to create a new Favorite destination, tap Save  
as Favourite.  
Photos can only be saved as destinations if the GPS co-  
ordinate information was available when the photo was taken.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I use the camera?  
How do I assign a photo to a  
Favorite?  
When a photo is assigned to an existing Favorite, only the image, and not the image co-ordinates, are associated  
with the Favorite.  
ꢋ ꢐ ꢠ  
1. From the Album screen, tap a photo.  
The Photo Details screen will display.  
2. From the Photo Details screen, tap Assign.  
The Assign Photo screen will display.  
3. Complete the following:  
If you want to ...  
Then ...  
ƒ
tap ꢒand select a Favorite destination from the list.  
The Favorite title will display.  
assign a photo to an existing Favorite  
location  
ƒ
tap Save.  
The photo is assigned to the Favorite and the Photo  
Details screen will display.  
ƒ
ƒ
tap ꢒand select A new favorite from the list.  
create a new Favorite (when GPS co-  
ordinates are associated with a photo)  
tap ꢚ.  
The Keyboard screen will display. Enter a name for your  
Favorite, then tap OK.  
ƒ
tap Save.  
The photo is saved as a new Favorite and the Photo  
Details screen will display.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What else can I do?  
What else can I do?  
When you want to...  
Then ...  
view your recent locations  
use 'Recent Locations', see "How do I navigate to a recent  
location?" on page 70.  
calculate a route that avoids a specified  
area on the map  
use 'Avoid an Area', see "How do I avoid an area?" on  
page 73.  
preview your route, or plan and view a route use the Route Demonstrator, see "How do I preview a  
without a GPS fix  
route?" on page 74.  
view statistical information on both your  
current trip and all trips to date  
use the Trip Meter, see "How do I view my route statistics?"  
on page 76.  
WARNING For your safety, enter destination information before you start a journey. Do not enter a destination while  
driving.  
In this section  
How do I navigate to a recent location?............................................................................................... 70  
How do I use the Map Menu?.............................................................................................................. 71  
How do I avoid an area?...................................................................................................................... 73  
How do I preview a route?................................................................................................................... 74  
How do I view my route statistics?....................................................................................................... 76  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What else can I do?  
How do I navigate to a recent  
location?  
To make navigating to an address easier, your iCN will automatically save all of your start locations and destinations  
in a list of recent locations.  
ꢄ ꢐ ꢮ  
1. Tap a recent location.  
The Recent Location Preview screen will display.  
2. Complete one of the following:  
If you want to ...  
Then ...  
calculate the route and open the 3D Map  
tap Go.  
screen  
The 3D Map screen will display.  
display the geographical details of the  
recent location  
tap Details.  
The Recent Location Details screen will display.  
ƒ
tap Save.  
The New Favorite screen will display.  
save the recent location as My Home  
save the recent location as a Favorite  
display Route Preferences  
ƒ
ƒ
Tap Save as My Home.  
tap Save.  
The New Favorite screen will display.  
ƒ
Tap Save as Favorite.  
tap Preferences.  
The Route Calculation screen will display.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What else can I do?  
If you want to ...  
Then ...  
change your destination  
press ꢍ.  
The Recent Locations screen will display.  
How do I use the Map Menu?  
The Map Menu allows you to access navigational functions from the 3D Map and 2D Map screen.  
Displaying the Map Menu  
1. Tap ꢅto display the 3D Map or 2D Map screen.  
2. Tap and drag to move around the map to your selected location.  
3. Either tap and hold the cross-hairs to select that location, or tap and hold elsewhere on the map.  
The Map Menu will display.  
Map Menu options  
The following options are available via the Map Menu:  
Menu Option  
Description  
Navigate To  
Calculates a route from your current location, once your current location  
is determined.  
Show Details  
Only available when the selected location is near a road.  
Displays the Location Details screen from which you can:  
ƒ
ƒ
ƒ
ƒ
ƒ
View details of the location  
Add the location to your multi-stop trip  
Save the location as a favorite  
Access and edit your route preferences  
Navigate to the location.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What else can I do?  
Menu Option  
Description  
Location  
Only available when the selected location is near a road.  
Displays the Location sub-menu from which you can:  
ƒ
ƒ
Add To Favorites. Displays the New Favorite screen for you to  
add the location as a favorite. For further information, see "How do  
I save a Favorite?" on page 51.  
Nearest POI. Displays the Select POI screen. Select the POI  
category, then the POI to navigate to. For further information, see  
"How do I search for a landmark or venue?" on page 37.  
ƒ
Add To Trip. Adds the location to your multi-stop trip.  
ƒ
Set As Start Location. Sets the location as your departure point.  
Route  
Only available when navigating a route.  
Displays the Route sub-menu from which you can:  
ƒ
Detour. Detours your route to avoid the next 1, 2, 5, 10 or 20  
kilometers or the next 1, 2, 5, 10 or 20 miles.  
ƒ
Demonstrate. Starts the route demonstration, demonstrating  
navigation from your current position or departure point.  
ƒ
ƒ
ƒ
Stop Demonstration. Stops the route demonstration.  
Skip Waypoint. Skips the next stop on your multi-stop trip.  
Show Entire Route. Displays your entire route on the 2D Map  
screen.  
ƒ
Show Summary. Displays a summary of your route, including your  
departure and destination addresses, total distance and total  
estimated time to your destination.  
Add Avoid Area  
Adds an Avoid Area for you to size.  
Deletes the selected Avoid Area.  
Delete Avoid Area  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What else can I do?  
How do I avoid an area?  
Your iCN can calculate a route that avoids a specified area on the map. Up to ten Avoid Areas can be added. Avoid  
Areas are displayed as shaded areas.  
CAUTION If no alternative route around an Avoid Area exists, the route calculation will fail.  
CAUTION If your destination is in an Avoid Area, you will be routed into that Avoid Area.  
How do I add an Avoid Area?  
1. Tap and hold the map to display the Map menu.  
2. Select Add Avoid Area.  
3. Tap and drag to set the Avoid Area to the correct size and position.  
The Avoid Area is added.  
How do I delete an Avoid Area?  
1. Locate the Avoid Area that you want to delete.  
2. Tap and hold the Avoid Area to display the Map menu.  
3. Select Remove Avoid Area.  
The Avoid Area is deleted.  
How do I delete all Avoid Areas?  
ꢯ ꢐ ꢰ ꢐ ꢱ  
The Saved Information screen will display.  
1. Tap Delete Avoid Areas.  
2. When the warning dialog-box opens, tap Yes to confirm.  
All Avoid Areas are deleted.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What else can I do?  
How do I preview a route?  
Route demonstration allows you to:  
ƒ
ƒ
Preview a route.  
Plan and view a route without a GPS fix, such as when you are inside a building.  
The following steps will show you how to preview one route. To always preview your route, see "Demonstration and  
Logging" on page 100.  
1. Select a departure point  
If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route to start  
elsewhere.  
a) Tap to display the cross-hairs on the Map screen.  
b) Position the intersection of the cross-hairs over your departure point.  
c) Tap and hold the cross hairs to display the Map menu.  
d) Select Location.  
The Location submenu will display.  
e) Select Set as Start Location.  
The Map menu will close, and the selected point is set as your departure point.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What else can I do?  
2. Select a destination point  
Set a destination either by using the address entry wizard or by using the Maps (see below):  
a) Locate your destination.  
b) Tap and hold your destination to display the Map menu.  
c) Select Navigate To.  
The Map menu will close and the map screen will display the calculated route.  
3. Demonstrate the route  
Once the route has been determined, you can demonstrate the route by completing the following:  
a) Tap and hold the Map screen to display the Map menu.  
b) Select Route.  
The Route submenu will display.  
c) Select Demonstrate.  
The 3D Map screen will display the calculated route in Route Demonstration mode.  
ƒ
If you have selected the Loop demonstrations check box on the Demonstration and Logging  
preferences screen, the Route Demonstration will continue to repeat the route.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What else can I do?  
How do I view my route  
statistics?  
The iCN provides information on your:  
ƒ
ƒ
ƒ
ƒ
ƒ
distance travelled  
average speed  
maximum speed  
time taken for trip  
stationary time.  
Trip information is presented in two different ways. These are:  
ƒ
ƒ
information for the current trip  
information for all trips to date, or since the tripmeter was last reset.  
How do I view statistics on my current  
route?  
The Tripmeter - Current Route screen is used to view statistical information for your current trip.  
The Tripmeter - Current Route screen will only display when there is a current route selected. If there is no route  
selected, the Tripmeter - Global screen will display as a default.  
a) Press and hold the Information button.  
The Tripmeter - Current Route screen will display.  
b) Complete one of the following:  
If you want to ...  
Then ...  
view statistics for your trips to date  
tap ꢌto display the Tripmeter - Global screen.  
ƒ
ƒ
tap Reset.  
A Warning dialog box will display.  
reset the tripmeter  
Tap Yes to reset.  
The Tripmeter - Current Route screen will display.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What else can I do?  
How do I view statistics of my trips to  
date?  
The Tripmeter - Global screen is used to view statistical information for all of your trips to date, or since the trip meter  
was last reset.  
The Tripmeter - Current Route screen will only display when there is a current route selected. If there is no route  
selected, the Tripmeter - Global screen will display as a default. Go to step b.  
a) From the Tripmeter - Current Route screen, tap ꢌ.  
The Tripmeter - Global screen will display.  
b) Complete one of the following:  
If you want to ...  
Then ...  
view statistics for your current route  
tap ꢍto display the Tripmeter - Current Route screen.  
ƒ
ƒ
tap Reset.  
A Warning dialog box will display.  
reset the tripmeter  
Tap Yes to reset.  
The Tripmeter - Global screen will display.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What is SmartST Desktop?  
What is SmartST  
Desktop?  
SmartꢀDesktop is software for your PC computer and is used to install maps to your iCN.  
You can also use it to remove maps from your iCN, obtain software updates, manage Custom Points of Interest  
(POIs) and install Basemaps.  
In this section  
How do I install SmartꢀDesktop on my computer?........................................................................... 80  
SmartꢀDesktop features .................................................................................................................. 81  
How do I keep Smartꢀup-to-date? ................................................................................................... 84  
How do I install maps on my iCN? ....................................................................................................... 85  
How do I backup my iCN? ................................................................................................................... 95  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What is SmartST Desktop?  
Can I use SmartꢀDesktop with my  
computer?  
Ensure you have the following minimum system requirements before installing SmartꢀDesktop:  
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
IBM compatible PC,  
Microsoft® Windows® 2000 or XP SP1 (NT not supported),  
Internet Explorer 6 or higher,  
CD drive,  
USB port,  
Internet connection for registration.  
You must install SmartꢀDesktop from the Application Installer CD onto your computer hard drive; you cannot  
run SmartꢀDesktop from the CD.  
®
What is Microsoft ActiveSync ?  
Microsoft ActiveSync is used to establish a connection between your iCN and your computer. ActiveSync  
3.7.1 will be installed on your computer (if a later version of ActiveSync is not already installed) as part of the  
installation of SmartꢀDesktop.  
After it is installed, ActiveSync will run in the Windows System Tray/Notification Area when you start  
Windows. ActiveSync will activate when your iCN is connected to your computer.  
For more information on ActiveSync, search for "ActiveSync" at www.microsoft.com.  
How do I install a map for the first  
time?  
The most common task performed using SmartꢀDesktop is the installation of a new map to your iCN  
internal memory or memory card. Complete the following procedures:  
Step Action  
1
2
3
Install SmartꢀDesktop on your computer, see "How do I install SmartꢀDesktop on my  
computer?" on page 80.  
Check for software updates for Smartꢀon your iCN, see "How do I keep Smartꢀup-to-  
date?" on page 84.  
Install one or more maps on your iCN, see "How do I install maps on my iCN?" on page 85.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What is SmartST Desktop?  
How do I install Smartꢀ  
Desktop on my computer?  
Before you Begin:  
Ensure that your computer meets the minimum system requirements for SmartꢀDesktop, especially:  
i. Ensure that Internet Explorer 6 or higher is installed on your computer before you install SmartꢀDesktop, even if  
it is not your default browser.  
ii. Windows XP users, ensure that Windows XP Service Pack 1 or higher has been applied before you install  
SmartꢀDesktop.  
1. Close all open programs on your computer.  
2. Insert the SmartꢀApplication Installer CD into your computer CD drive.  
The SmartꢀDesktop installer will start.  
ƒ
If your computer does not automatically launch the CD, start the installation manually:  
Start > Run.  
Type D:\Install.exe where “D” is the letter assigned to your CD drive, then click OK.  
3. Select your preferred language for SmartꢀDesktop.  
4. Click Install SmartST Desktop.  
5. Follow the screen prompts to install SmartꢀDesktop:  
ƒ
Review and accept the Licence Agreement for SmartꢀDesktop and Microsoft ActiveSync (if not already  
installed on your computer) when prompted.  
ƒ
ƒ
Select a destination folder for SmartꢀDesktop when prompted.  
When the installation has finished, click Finish.  
SmartꢀDesktop will open.  
6. If prompted to connect your iCN to your computer, complete the following:  
ƒ
Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub); plug the  
small end into the USB Socket (ꢉ) on the side of your iCN.  
Where possible, plug the USB cable into a USB port at the back of your computer.  
ƒ
Plug the small end of the AC Power Pack cable into the ꢈsocket on the side of your iCN; plug the other  
end into the mains.  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What is SmartST Desktop?  
ƒ
ƒ
Press ꢊ.  
Your iCN will turn on.  
When the following screen displays on your iCN, click Next:  
Microsoft ActiveSync will synchronize with your iCN.  
You are now ready to use SmartꢀDesktop to install maps to your iCN.  
Smartꢀ Desktop features  
Once SmartꢀDesktop has been installed on your computer, you can access it from the Windows Start menu:  
Start > All Programs > Navman > SmartST Desktop 2006  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What is SmartST Desktop?  
Element  
Description  
Menu bar  
Menus that provide access to SmartꢀDesktop functionality.  
Toolbars  
There are three toolbars:  
ƒ
ƒ
ƒ
Status  
Globe  
Cursor  
To display toolbars that are not on by default, select Toolbars on the  
View menu.  
For more information, see "Toolbars" on page 83.  
Add Maps and  
View/Remove Maps  
tabs  
Follow the steps on the Add Maps tab to install maps to your iCN,  
memory card, or memory card via a memory card reader. For more  
information, see "How do I install maps on my iCN?" on page 85.  
Follow the steps on the View/Remove Maps tab to remove installed  
maps from your iCN, memory card, or memory card via a memory card  
reader.  
Check for updates/  
Update available  
Click to check online for software updates or download software  
updates.  
Globe  
A map of the world indicating the maps:  
ƒ
ƒ
ƒ
ƒ
on the current CD,  
on a CD that came with the current CD,  
installed on your iCN or memory card, or  
available from Navman.  
Map Information  
The following information will display when you point to a map:  
ƒ
ƒ
Map name  
File size (if the map is on the inserted CD or a CD in the same  
set)  
ƒ
ƒ
ƒ
Map status  
Latitude Longitude co-ordinates in degrees, minutes and seconds  
Local time offset UTC  
To display the Latitude and Longitude co-ordinates and UTC offset, click  
Map Colour Key  
A key for defining the different colours of the maps.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What is SmartST Desktop?  
Toolbars  
The following toolbars are available in SmartꢀDesktop:  
Toolbar  
Button  
Description  
Status  
Indicates that your iCN is connected to your computer via ActiveSync.  
Indicates that your iCN is not connected to your computer.  
Globe  
Click to zoom in to the globe.  
Click to zoom out of the globe.  
Controls whether the globe automatically rotates to the correct maps  
when a map CD is inserted in your CD drive.  
Controls whether the globe is transparent.  
Controls whether the day/night line is displayed on the globe.  
Controls whether the maps are displayed on a globe or Mercator  
Projection.  
Cursor  
Controls whether the Latitude Longitude co-ordinates and UTC offset are  
displayed in the pointer text.  
Moving a toolbar  
A toolbar is either docked in the gray area at the top of the screen, or floating on the screen.  
ƒ
ƒ
To float a toolbar, click the portion of the toolbar to the left of the buttons and drag it to anywhere on the screen.  
To dock a toolbar, either double-click the top of a floating toolbar, or click and drag the toolbar back to the gray  
area at the top of the screen.  
ƒ
To position a floating toolbar over a docked toolbar, press and hold CTRL while you drag the toolbar to the  
required position.  
Reshaping a toolbar  
Click and drag the edge of a floating toolbar to reshape it. You cannot reshape a toolbar that is docked at the top of  
the screen.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What is SmartST Desktop?  
How do I keep Smartꢀ  
up-to-date?  
We recommend that you regularly use SmartꢀDesktop to check the Navman server for Smartꢀsoftware updates.  
Updating vs. Upgrading  
Updating software is different from upgrading software:  
When you update Smartꢀ, the latest service packs and bug fixes are downloaded from Navman and applied to your  
iCN.  
To upgrade Smartꢀ, you must first purchase a new version of Smartꢀfrom a retailer, then install it on your iCN.  
How do I update Smartꢀ?  
1. If you connect to the Internet via a dial-up connection, connect to the Internet now.  
2. Open SmartꢀDesktop, follow the prompts, then click Check for updates.  
Your computer will connect to the Navman server to check for software updates.  
3. If a software update is available, complete the following:  
a)  
Click Update available.  
The Navman website will open.  
b)  
c)  
Select the update for your region and download it to your computer.  
On the Setup menu, select Update software, then Update software on iCN.  
Follow the prompts to update your iCN software.  
Can I automatically check for software updates?  
To configure SmartꢀDesktop to automatically check the Navman server for software updates, from the Setup  
menu, select Update software, then Automatically check for software updates.  
If a software update is available, complete step 3 above.  
How do I upgrade from a previous version of Smartꢀ?  
Follow the instructions in the Installation Guide or Upgrade Guide that came with your Smartꢀupgrade.  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What is SmartST Desktop?  
How do I install maps on my  
iCN?  
Your iCN comes with one or more pre-activated maps.  
You can install maps from the enclosed CDs to memory card or your iCN internal hard drive; however you may first  
need to purchase a Map Product Key to activate the maps. For detailed information on your model of iCN and  
whether you require a Map Product Key, see "Which maps are already installed on my iCN?" on page 111.  
How do I use preactivated memory cards?  
Preactivated maps are also available for purchase separately on memory card. To use a preactivated memory card,  
insert the card in the Memory Card slot and Drive-Away™. For more information, see "How do I use a memory card  
with my iCN?" on page 112.  
Which map should I install?  
If you are not sure which map contains the town or city that you want to install, you can use the Find City window to  
identify the correct map. For more information, see "How do I know which map contains a particular city or town?" on  
page 88.  
How do I install maps from CD?  
1. Open SmartꢀDesktop, if it is not already open:  
Start > All Programs > Navman > SmartST Desktop 2006  
2. Insert a SmartꢀMap CD into your computer CD drive.  
ƒ
ƒ
The preactivated maps that are ready to be installed to your iCN are light green.  
The maps on the CD that require activation before being installed to your iCN are light blue.  
If your computer opens Windows Explorer when the CD is inserted, close the Windows Explorer window.  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What is SmartST Desktop?  
3. Complete the following:  
If the map to be installed is ...  
Then ...  
light green  
go to step 6.  
light blue  
the map needs to be activated via the Internet before it  
can be installed; continue to step 4.  
4. If you connect to the Internet via a dial-up connection, connect to the Internet now.  
5. Follow the prompts to activate your Map Product Key, including:  
ƒ
Enter the Map Product Key from the back of the enclosed CD box when prompted.  
ƒ
ƒ
Your computer will connect to the Internet and activate your Map Product Key.  
When activation has completed, the map will change colour to light green; continue to step 6.  
6. Click the map you want to install to your iCN.  
The map will change colour to dark green to indicate it has been selected. The map is now listed in the Review  
Selected Maps section of the Add Maps tab.  
ƒ
To deselect a map, click the map again.  
You may need to install multiple maps to cover the desired geographical area.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What is SmartST Desktop?  
7. Complete the following:  
If you want to ...  
select a light green map  
select a light blue map  
Then ...  
go back to step 6.  
the map needs to be activated via the Internet before it can be  
installed; go back to step 4.  
select a Major Road Network map  
install the selected maps to your iCN  
select the check box in the Step 1: Select Maps section.  
For information on Major Road Network maps, see "What is a  
Major Road Network map?" on page 89.  
continue to step 8.  
8. In the Step 3: Install Maps section, select the destination media for the selected maps, for example, memory  
card or iCN internal memory.  
9. Click Install Maps.  
When they have been installed, the map or maps will change colour to yellow.  
10. To use your iCN, disconnect the USB cable.  
WARNING Do not disconnect the USB cable from the iCN USB Socket until the Globe has refreshed, and the  
installed map or maps have changed colour to yellow.  
How do I remove maps from my iCN?  
1. Open SmartꢀDesktop, if it is not already open:  
Start > All Programs > Navman > SmartST Desktop 2006  
2. Click the View/Remove Tabs tab.  
The View/Remove tab will open, displaying a list of installed maps.  
3. Select the name from the list of the map that you want to remove, then click Remove.  
4. Confirm that you want to remove the selected map when prompted.  
The map is removed from your iCN.  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What is SmartST Desktop?  
How do I know which map contains a  
particular city or town?  
Use the Find City window to find the map that contains a particular city or town.  
1. On the Map menu, select Find City.  
The Find City window will open.  
2. Type the name of the city or town in the City Name field.  
The list of available cities will reduce to match your search.  
3. Double-click the name of the city or town.  
The Globe will rotate to centre on the selected city or town and  
will mark the city or town location.  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | What is SmartST Desktop?  
What is a Major Road Network map?  
Continuous continental navigation  
Major Road Network maps allow you to seamlessly navigate between installed maps without installing maps of all  
regions along your route. Each Major Road Network map covers a large area, such as Western Europe or Canada  
and the United States (continental), and contains main roads that connect cities and towns. You can select a road or  
Point of Interest on the Major Road Network map as your departure point or destination.  
All Major Road Network maps:  
ƒ
ƒ
ƒ
contain roads and ferry connections of high national and international importance.  
use less memory than would be necessary to install all equivalent detailed maps.  
exclude smaller roads and have a reduced level of geographical detail.  
Major Road Network map table  
Region of  
Purchase  
Model  
Description  
Australia or  
New Zealand  
All  
Does not require a Major Road Network map, as  
detailed maps of either Australia or New Zealand are  
pre-installed on your iCN.  
Canada and  
United States  
All  
Does not require a Major Road Network map, as  
detailed maps of Canada and the United States  
(continental) are pre-installed on your iCN.  
Western Europe  
iCN 720  
iCN 750  
A Major Road Network map of Western Europe is  
pre-installed on your iCN.  
Does not require a Major Road Network map, as  
detailed maps of Western Europe are pre-installed  
on your iCN.  
How do I install or reinstall a Major Road Network map?  
Major Road Network maps can be installed to a new memory card or reinstalled to your iCN hard drive using  
SmartꢀDesktop. For more information, see "How do I install maps from CD?" on page 85.  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I install Custom Points of Interest?  
How do I install  
Custom Points of  
Interest?  
You can create custom Points of Interest (POIs) by using the POI Editor in two ways:  
ƒ
ƒ
by creating your own POI files, or  
by using compatible POI files, such as safety camera locations, downloaded from the Internet.  
Various POI files are available for download for free or by subscription from third-party websites1. Ensure that  
downloaded POI files are in .csv (Comma Separated Values) format.  
A maximum of 25 custom POI files can be saved on your iCN. Each file corresponds to a POI category; for example,  
Hotels.csv will be listed in your iCN as the Hotels category.  
POI Alerts  
Custom POI categories can be set to enable a warning sound or visual warning when in close proximity. For more  
information, see "POI Alerts" on page 109.  
1 Navman is not responsible for the content or accuracy of the information or the reliability or availability of these websites.The use of  
information regarding safety camera locations may be subject to local laws in the country of use. You are responsible for checking that  
you can use the information in your country or in the country where the information will be used.  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I install Custom Points of Interest?  
How do I create a Custom POI file?  
Complete the following steps to create or edit a custom POI file containing the latitude and longitude of individual  
POIs. The file will be saved on your computer in .csv (Comma Separated Values) format.  
When you have finished creating or editing the file, you can copy it to your iCN. For more information, see "How do I  
copy a Custom POI file to my iCN?" on page 92.  
Map ꢐPoints of Interest  
1. Complete one of the following:  
If you want to ...  
Then ...  
create a new POI file  
ƒ
ƒ
Click  
.
The POI File Name window will open.  
Type a name for the file in the File Name box, then click  
OK.  
The file name will be used as both the name of the CSV  
file and the category name.  
The file name cannot include spaces.  
The category name will consist of the first 8 characters.  
open an existing POI file  
ƒ
ƒ
Click  
.
The Open dialogue box will open.  
Select the POI file from your local or network drive, then  
click Open.  
The POIs contained in the POI file are listed.  
2. Complete the following to add or edit a POI:  
a)  
On the Edit menu, click New to create a new POI, or Modify to edit the selected POI.  
The POI Details window will open.  
b)  
c)  
Type a description for the POI in the Description box.  
Complete one of the following:  
If you know ...  
Then ...  
the degrees, minutes and seconds of the  
POI  
on the Degrees, Minutes, Seconds tab, type or select the  
degree, minute and second of the POI latitude in the Latitude  
boxes and the POI longitude in the Longitude boxes.  
Select N, S, E or W to designate the hemisphere of the co-  
ordinates.  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I install Custom Points of Interest?  
If you know ...  
Then ...  
the decimal degrees of the POI  
on the Decimal Degrees tab, type the POI latitude in the  
Latitude box and the POI longitude in the Longitude box.  
Select N, S, E or W to designate the hemisphere of the co-  
ordinates.  
d)  
Click OK to save the POI.  
3. Repeat step 2 until all POIs have been added to the POI file.  
4. Click  
.
The POI file is saved.  
You are now ready to copy your custom POI file to your iCN. For more information, see "How do I copy a Custom  
POI file to my iCN?" on page 92.  
How do I copy a Custom POI file to my  
iCN?  
Map ꢐPoints of Interest  
1. Open or create a POI file.  
2. Click  
.
The POI Options window will open.  
You can open the POI Options window at any time by clicking  
.
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I install Custom Points of Interest?  
3. Modify the POI settings as required:  
If you want to...  
Then...  
edit the POI category name  
type the name of the POI category in the POI Name field.  
The file name cannot include spaces.  
The category name will consist of the first 8 characters.  
activate the POI to enable proximity  
warnings  
select the Active check box.  
If you do not activate the POI, you will not be able to  
configure the Alert settings.  
enable a visual warning when a POI of this select the Visual Alert check box.  
category is in close proximity  
enable a warning sound when a POI of this select the Audio Alert check box.  
category is in close proximity  
change the units used to measure distance select either the Metric or Imperial option.  
for this POI category  
select the distance from a POI of this  
category at which the visual warning  
should display or the warning chime should  
sound  
select the distance from the Distance box.  
indicate the priority of a POI of this  
category when one or more additional  
POIs are in the same vicinity  
move the POI Visibility Level slider left for lower priority or  
right for higher priority.  
select an icon to display on the map  
screens for POIs of this category  
type the path to the icon file to be used to represent the POI  
type, in the Icon File box, or click Browse to select the icon  
file from your local or network drive. Once you have located  
the icon file, select it and click Open.  
The icon file must be a bitmap (.bmp) graphic with a  
minimum size of 6x6 pixels and a maximum size of 32x32  
pixels.  
If you do not select a custom icon, a default icon will  
display.  
select a custom sound alert file to play  
when a POI of this category is in close  
proximity  
select a sound file from the list.  
The list of sounds is formed from default sound files and  
sound files that you have added using My Sounds Admin. For  
more information, see "How do I add sound files to My  
Sounds Admin?" on page 94.  
Click  
to include a WAVE (.wav) sound file from your  
computer or network.  
Click  
to play the selected sound file.  
If you do not select a custom sound file, a default sound  
alert will play.  
4. Click OK to save the POI settings.  
The Copy POIs window will open.  
5. Select the destination media for the selected maps; for example, memory card or iCN internal memory, then  
click Copy POI.  
The POI file is saved to the iCN or memory card as a POI category.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I install Custom Points of Interest?  
How do I add sound files to My Sounds Admin?  
My Sounds Admin is used to compile a list of sound files for you to select an audible alert from when editing the POI  
file options.  
Map ꢐPoints of Interest  
1. Click  
.
The My Sounds Admin window will open.  
2. Add, delete or play sound files as required:  
If you want to...  
Then...  
add a sound file  
click  
to select a WAVE (.wav) sound file from your local or  
network drive. Once you have located the sound file, select it  
and click Open.  
delete a sound file  
play a sound file  
select the sound file from the list and click  
select the sound file from the list and click  
.
.
3. Click OK to save your list of sound files and close the My Sounds Admin window.  
How do I delete a Custom POI File from my iCN?  
Map ꢐPoints of Interest  
1. Click  
.
The Manage POI Files window will open, displaying a list of custom POI files installed on your iCN.  
2. Click the File Name or Size of the POI file to delete.  
3. Click Delete.  
The file is removed from the list, but is not yet deleted.  
4. To select another file to delete, go back to step 2; otherwise, continue to step 5.  
5. Click OK and accept the changes.  
The selected file or files are deleted.  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | How do I install Custom Points of Interest?  
How do I backup my iCN?  
You can save backups of the following information, and later restore them to your iCN:  
ƒ
ƒ
ƒ
ƒ
Favorites and My Home  
Preferences, including Point of Interest and photo preferences  
Multi-stop trips  
Recent locations.  
How do I Backup my iCN?  
1. On the File menu, select Backup.  
The Backup/Restore window will open.  
2. Click New Backup.  
The New Backup window will display.  
3. Click OK.  
The New Backup window will close and your backup will be saved to your computer. The backup will be listed  
on the Backup window.  
4. Close the Backup/Restore window.  
How do I Restore a Backup to my iCN?  
1. On the File menu, select Restore.  
The Backup/Restore window will open.  
2. Select the backup from the list, then click Restore.  
The backup will be restored to your iCN.  
3. Close the Backup/Restore window.  
How do I Delete a Backup?  
1. On the File menu, select Backup.  
The Backup/Restore window will open.  
2. Select from the list the backup to delete.  
3. Click Delete, then click OK.  
The backup is deleted.  
4. Close the Backup/Restore window.  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Reference  
In this section  
What can I customize? ........................................................................................................................ 97  
Which maps are already installed on my iCN?..................................................................................... 111  
How do I use a memory card with my iCN? ......................................................................................... 112  
Street types - US ................................................................................................................................. 114  
Street types - Canada.......................................................................................................................... 118  
Points of Interest categories ................................................................................................................ 122  
Specifications ...................................................................................................................................... 124  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
What can I customize?  
There are a number of different customization options available to enhance your navigation experience.  
The Preferences menu is shown below, and is accessed by pressing the ꢃbutton on your iCN, then tapping ꢯ.  
Element  
ꢲ
Description  
Options to control aspects of your route; for example, indicating a preference  
for freeways.  
Displays the SmartꢀTutorial.  
ꢳ
ꢰ
ꢴ
ꢵ
Options to control how the iCN functions; for example, power and language  
controls.  
Options to control the screen brightness, touchscreen alignment and  
measurement preferences.  
Legal, version and copyright information.  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Route Preferences  
You can enhance your navigation experience by modifying aspects of your route and route calculation.  
The first route preference screen is the Route Calculation screen, and is accessed by tapping ꢲon the  
Preferences menu. Tap ꢌto display the other route preference screens.  
Route Calculation  
ꢃ ꢐ ꢯ ꢐ ꢲ  
Complete the following:  
If you want to...  
Then...  
change the route type  
move the Route Type slider towards Fastest time to give more  
weighting to the fastest time when calculating a route.  
move the Route Type slider towards Shortest distance to give more  
weighting to the shortest distance when calculating a route.  
change the preference for  
freeways  
move the Preference for Freeways slider towards Less often to use  
roads other than freeways where possible when calculating a route.  
This option may not completely remove Freeways from a route.  
move the Preference for Freeways slider towards More often to  
use freeways where possible when calculating a route.  
ƒ
ƒ
Your preferences are automatically saved.  
Tap ꢍto return to the previous screen.  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Road Types  
ꢃ ꢐ ꢯ ꢐ ꢲ ꢐ ꢌ  
Complete the following:  
If you want to...  
Then...  
avoid toll roads  
select the Toll roads check box in the Avoid column.  
receive a warning if your route  
includes toll roads  
select the Toll roads check box in the Warn column. The warning  
will display at the start of your trip.  
avoid unsealed roads  
select the Unsealed roads check box in the Avoid column.  
receive a warning if your route  
includes unsealed roads  
select the Unsealed roads check box in the Warn column. The  
warning will display at the start of your trip.  
avoid ferry routes  
select the Ferry routes check box in the Avoid column.  
receive a warning if your route  
includes ferry routes  
select the Ferry routes check box in the Warn column. The warning  
will display at the start of your trip.  
ƒ
ƒ
Your preferences are automatically saved.  
Tap ꢍto return to the previous screen.  
Driving Alerts  
ꢃ ꢐ ꢯ ꢐ ꢲ ꢐ ꢌ ꢐ ꢌ  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Complete the following:  
If you want to...  
Then...  
enable a warning chime when  
travelling at or above a  
designated speed  
select the speed in the Alert me when my speed exceeds check box.  
select your preferred speed  
select your preferred speed from the Speed box.  
enable a visual warning if the  
Main Menu screen is accessed in  
a moving vehicle  
select the Warn me not to operate my iCN while driving check box.  
ƒ
ƒ
Your preferences are automatically saved.  
Tap ꢍto return to the previous screen.  
Demonstration and Logging  
ꢃ ꢐ ꢯ ꢐ ꢲ ꢐ ꢌ ꢐ ꢌ ꢐ ꢌ  
Complete the following:  
If you want to...  
Then...  
enable the route demonstration  
select the Demonstrate routes check box. This allows you to plan  
and view a route without a GPS fix.  
enable the route demonstration to select the Loop demonstrations check box.  
play repeatedly  
enable a shop demonstration of  
select the SmartST shop demonstration check box. After a 10-  
Smartꢀto be played  
second delay, the route demonstration will navigate between your first  
and second Favorite.  
enable GPS data logging  
contact Navman Customer Support, as we recommend this feature be  
used only under the supervision of a Navman technician.  
(only to be used if required by  
Navman Customer Support)  
ƒ
ƒ
Your preferences are automatically saved.  
Tap ꢍto return to the previous screen.  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Tutorial  
The Tutorial displays when you turn your iCN on, unless you have cleared the Show on start-up check box.  
You can view the Tutorial at any other time:  
ꢃ ꢐ ꢯ ꢐ ꢳ  
ƒ
To prevent the Tutorial from displaying again on startup, tap the Show on start-up check box to clear it.  
ƒ
To move forward through the Tutorial screens, tap ꢌ.  
To revisit the previous screen, tap ꢍ.  
When you have finished the Tutorial, the Preferences menu will display.  
System Preferences  
You can enhance your navigation experience by modifying aspects of the way that your iCN functions.  
The System Preferences menu is shown below, and is accessed by tapping ꢰon the Preferences menu.  
Element  
ꢶ
ꢣ
ꢷ
ꢸ
ꢱ
ꢹ
Description  
Options to control the screen brightness and touch screen alignment.  
An option to reset the GPS signal.  
Options to control the way that power to the unit is used; for example, the time to elapse  
before the unit is automatically turned off.  
Options to control the language used on your iCN, and voice guidance.  
Options to delete saved information.  
Options to control what is displayed when your iCN is turned on.  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Screen Display  
ꢃ ꢐ ꢯ ꢐ ꢰ ꢐ ꢶ  
For further information, see "Screen Display" on page 106.  
GPS Status  
Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. The GPS Status screen  
provides a visual representation of the information being received.  
Latitude and longitude are displayed, along with ground speed, the heading in degrees and a north-pointing  
compass. The strength of each satellite is displayed on a bar chart.  
For more information on GPS, see "How do I navigate with GPS?" on page 22.  
ꢃ ꢐ ꢯ ꢐ ꢰ ꢐ ꢣ  
The satellites available from your current position are shown as grey, red and green coloured bars:  
Bar Colour  
Grey  
Description  
No signal at all  
Red  
A valid signal, but not being used to fix your position  
A valid signal being used to fix your position  
Green  
Resetting your GPS fix  
On occasion, the GPS fix may need to be reset. This may occur if the receiver has been transported a large distance  
since last being used; for example, to a different country, and is still trying to establish the previous position.  
Complete the following:  
If you want to...  
Then...  
reset the GPS  
tap Reset GPS.  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Power  
ꢃ ꢐ ꢯ ꢐ ꢰ ꢐ ꢷ  
The Battery Status bar shows the percentage of power left in the iCN battery; the word Charging will display when  
the battery is charging from an external power source. To charge the battery, see "Internal battery" on page 16.  
Complete the following:  
If you want to...  
Then...  
change the time to elapse before  
turning off, when using battery  
power  
tap the on battery power box and select a time to elapse before  
turning off;  
select Never for the iCN to not turn off automatically unless battery  
power is very low.  
change the time to elapse before  
turning off, when using external  
power  
tap the on external power box and select a time to elapse before  
turning off;  
select Never for the iCN to never turn off automatically.  
ƒ
ƒ
Your preferences are automatically saved.  
Tap ꢍto return to the previous screen.  
Language  
ꢃ ꢐ ꢯ ꢐ ꢰ ꢐ ꢸ  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Complete the following:  
If you want to...  
Then...  
change the on-screen language  
select your preferred language from the Language box and tap OK.  
Your language preference is saved and the map screen is displayed.  
enable voice guidance instructions select the Enable voice guidance checkbox.  
while driving to your destination  
change the voice scheme  
select your preferred voice scheme from the Voice Guidance box.  
Only voice schemes that are compatible with the chosen language are  
displayed.  
ƒ
ƒ
Your preferences are automatically saved.  
Tap ꢍto return to the previous screen.  
Saved Information  
ꢃ ꢐ ꢯ ꢐ ꢰ ꢐ ꢱ  
Complete the following:  
If you want to...  
delete recent locations  
delete Favorites  
Then...  
tap Delete Recent Locations.  
tap Delete Favorite Destinations.  
tap Delete Avoid Areas.  
tap Restore Factory Defaults.  
delete avoid areas  
restore factory default settings  
ƒ
ƒ
When the warning dialog box displays, tap Yes.  
Tap ꢍto return to the previous screen.  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Start-up  
ꢃ ꢐ ꢯ ꢐ ꢰ ꢐ ꢹ  
Complete the following:  
If you want to...  
Then...  
show the Tutorial when you turn  
select the Show the Tutorial checkbox.  
on your iCN  
show the Language Selection  
select the Show the Language Selection screen checkbox.  
screen when you turn on your iCN  
ƒ
ƒ
Your preferences are automatically saved.  
Tap ꢍto return to the previous screen.  
Display Preferences  
You can enhance your navigation experience by modifying aspects of the way that your iCN displays information.  
The Display Preferences menu is shown below, and is accessed by tapping ꢺon the Preferences menu.  
Element  
ꢶ
Description  
Options to control the screen brightness and touch screen alignment.  
Options to control the general map presentation and colour scheme.  
ꢺ
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Element  
Description  
Options to control measurement of time, position and distance.  
ꢻ
Screen Display  
ꢃ ꢐ ꢯ ꢐ ꢴ ꢐ ꢶ  
ꢃ ꢐ ꢯ ꢐ ꢰ ꢐ ꢶ  
or  
Complete the following:  
If you want to...  
Then...  
change the screen brightness  
move the Screen Brightness slider towards Bright to increase  
screen brightness.  
move the Screen Brightness slider towards Dim to decrease screen  
brightness.  
Warning: The iCN can heat up when the Brightness scale is set above  
70% - i.e., when more than seven rectangles are coloured - therefore,  
use lower brightness whenever acceptable.  
The screen brightness can also be adjusted using the remote control  
(may be sold separately).  
align the touch screen  
tap Align and follow the prompts.  
The prompts are available in English only.  
ƒ
ƒ
Your preferences are automatically saved.  
Tap ꢍto return to the previous screen.  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Map Display  
ꢃ ꢐ ꢯ ꢐ ꢴ ꢐ ꢺ  
Complete the following:  
If you want to...  
Then...  
change the color scheme  
select your preferred scheme from the Map Colour Scheme box.  
improve screen contrast in light or select either the Day hues or the Night hues option.  
dark conditions  
enable automatic zooming during select the Auto-zoom on Main Map screens check box. If selected,  
navigation  
the 3D Map and 2D Map screens will automatically zoom in or out,  
depending on your speed, to allow optimal route-viewing.  
display North at the top of the 2D  
select the Keep North at top of 2D Map screen check box.  
Map screen  
display “no entry” icons on “no  
entry” roads on the 2D Map and  
3D Map screens  
select the Show no-entry road signs check box.  
ƒ
ƒ
Your preferences are automatically saved.  
Tap ꢍto return to the previous screen.  
Measurements  
ꢃ ꢐ ꢯ ꢐ ꢴ ꢐ ꢻ  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Complete the following:  
If you want to...  
Then...  
change the Position Format  
select either the Decimal degrees or the Degrees, minutes and  
seconds option.  
change the local time offset  
change the distance units2  
select either the 12 hour or 24 hour option for time-format.  
select your preferred distance units measurement from the Distance  
Units box.  
ƒ
ƒ
Your preferences are automatically saved.  
Tap ꢍto return to the previous screen.  
POI Preferences  
You can enhance your navigation experience by modifying aspects of the way that your iCN displays and manages  
POIs.  
The POI Menu is shown below, and is accessed by tapping ꢼon the Preferences menu.  
Element  
ꢽ
Description  
Options to to set warning chimes and visual warnings for custom POI categories that will  
activate within a chosen distance-radius of your location.  
Options to control the display of POIs on your iCN.  
Options to search for a POI by name.  
ꢾ
ꢿ
Options to search for a POI in a distance-radius of your location.  
ꣀ
2 Only available when UK English, AU English or US English language is selected.  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
POI Alerts  
The POI Alert preferences allow you to set warning chimes and visual warnings for custom POI categories that will  
activate within a chosen distance-radius of your location. For example, a warning chime will sound or a visual  
warning will display when an active POI is in the vicinity (set by the Warning Distance preferences), but not  
necessarily on your route.  
Custom POIs must first be installed on your iCN using SmartꢀDesktop before they can be set as active POIs.  
ꢃ ꢐ ꢼ ꢐ ꢽ  
1. Tap a custom POI category.  
The activation preferences for the selected POI category will display.  
2. Complete the following:  
If you want to...  
Then...  
display the POI on the map  
select the Display on the map check box.  
enable a warning chime when the select the With an audible alert check box.  
POI is in close proximity  
enable a visual warning when the select the With a visual alert check box.  
POI is in close proximity  
select the distance at which the  
warnings will activate  
move the Warning distance slider to select the distance at which the  
warnings will activate.  
ƒ
ƒ
Your preferences are automatically saved.  
Tap ꢍto return to the previous screen.  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
How do I enable Points of Interest?  
Points of Interest (POI) in a region are grouped into categories. You may either choose to display (or hide) icons of  
all POI categories on the map screens, or to selectively display desired icons chosen from the list of POI categories.  
For example, you may be only interested in entertainment venues and want to disable other POI categories such as  
schools.  
ꢃ ꢐ ꢼ ꢐ ꢾ  
Complete the following:  
If you want to...  
Then...  
display all POI icons (ie, icons  
from all POI categories)  
tap Turn all on.  
display no POI icons  
tap Turn all off.  
select a specific POI category  
icon for display on the map  
screens  
select the desired POI category checkbox;  
repeat until all desired POI categories are selected.  
ƒ
ƒ
Your preferences are automatically saved.  
Tap ꢍto return to the previous screen.  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Which maps are already  
installed on my iCN?  
Region of  
Purchase  
Model  
Description  
Australia or  
New Zealand  
iCN 750  
Preactivated maps of Australia or New Zealand are  
preinstalled on your iCN.  
You can reinstall your maps from the enclosed CD, if  
necessary, using SmartꢀDesktop.  
Preactivated maps of other countries are available for  
purchase on memory card.  
Canada and  
United States  
iCN 750  
Preactivated maps of Canada and the United States  
are preinstalled on your iCN.  
You can reinstall your maps from the enclosed CDs, if  
necessary, using SmartꢀDesktop.  
Preactivated maps of other countries or states are  
available for purchase on memory card.  
Western Europe, including  
the United Kingdom  
iCN 720  
Preactivated maps of one or more countries are  
preinstalled on your iCN.  
Maps of Western Europe are on the enclosed CDs.  
You can reinstall your preactivated maps from the  
enclosed CDs, if necessary, using SmartꢀDesktop;  
however to install a non-activated map, you must first  
purchase a Map Product Key.  
Alternatively, preactivated maps are available for  
purchase on memory card.  
iCN 750  
Preactivated maps of Western Europe are  
preinstalled on your iCN.  
You can reinstall your maps from the enclosed CDs, if  
necessary, using SmartꢀDesktop.  
Preactivated maps of other countries are available for  
purchase on memory card.  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
How do I use a memory card  
with my iCN?  
Your iCN has a memory card slot (ꢇ) for an SD or MMC memory card (not included) that can be used for storing  
maps or photos.  
Map Storage  
If there is not enough space in your iCN internal memory for a required map, you can install maps to your memory  
card using SmartꢀDesktop. For information on installing maps, see "How do I install maps on my iCN?" on  
page 85.  
Alternatively, preactivated maps are available for purchase separately on memory card.  
To navigate using maps on a memory card, ensure the card is in the memory card slot before you set your  
destination, then Drive-Away™.  
Photo Album  
Photos can be copied from the Album on your iCN to the My Pictures folder on your memory card. The first time a  
photo is copied to the memory card, the following folders will be created:  
E:\My Documents\My Pictures, where “E” is the letter assigned to your memory card drive or reader.  
All photos in My Pictures are part of the same photo album and can be viewed on your iCN. For more information on  
viewing albums and copying photos between albums, see "Album management" on page 61.  
Once a photo has been copied to the photo album on your memory card, you can then use the card with your  
computer to save, e-mail or print the photos, or take the memory card to a digital photo retailer for printing.  
112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
How do I insert a Memory Card?  
Holding the card by the edges, gently insert it into the ꢇslot with the label facing the front of the iCN.  
CAUTION Do not to apply pressure to the center of the memory card.  
How do I remove a Memory Card?  
Before removing the memory card, turn off the iCN. Next, gently push the top edge of the card to release it, and pull it  
out of the slot.  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Street types - US  
Country  
Street Type  
Abbreviation  
ALLEY  
ALLEY  
ANNEX  
ARC  
AVE  
United States of America  
ANNEX  
ARCADE  
AVENUE  
BAYOU  
BYU  
BEACH  
BCH  
BND  
BLF  
BEND  
BLUFF  
BLUFFS  
BOTTOM  
BOULEVARD  
BRANCH  
BRIDGE  
BROOK  
BROOKS  
BURG  
BLFS  
BTM  
BLVD  
BR  
BRG  
BRK  
BRKS  
BG  
BURGS  
BGS  
BYP  
BY-PASS  
CAMP  
CP  
CANYON  
CAPE  
CYN  
CPE  
CAUSEWAY  
CENTER  
CENTERS  
CIRCLE  
CIRCLES  
CLIFF  
CSWY  
CTR  
CTRS  
CIR  
CIRS  
CLF  
CLIFFS  
CLFS  
CLB  
CLUB  
COMMON  
CORNER  
CORNERS  
COURSE  
COURT  
COMMON  
COR  
CORS  
CRSE  
CT  
COURTS  
COVE  
CTS  
CV  
COVES  
CVS  
CREEK  
CRK  
CRES  
CRST  
XING  
XRD  
CURV  
CRESCENT  
CREST  
CROSSING  
CROSSROAD  
CURVE  
114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Country  
Street Type  
Abbreviation  
United States of America  
DALE  
DL  
DAM  
DM  
DIVIDE  
DV  
DRIVE  
DR  
DRIVES  
ESTATE  
ESTATES  
EXPRESSWAY  
EXTENSION  
EXTENSIONS  
FALLS  
DRS  
EST  
ESTS  
EXPY  
EXT  
EXTS  
FLS  
FERRY  
FRY  
FLD  
FIELD  
FIELDS  
FLDS  
FLTS  
FRD  
FRDS  
FRST  
FRG  
FRGS  
FRK  
FRKS  
FT  
FLATS  
FORD  
FORDS  
FOREST  
FORGE  
FORGES  
FORK  
FORKS  
FORT  
FREEWAY  
GARDEN  
GARDENS  
GATEWAY  
GLEN  
FWY  
GDN  
GDNS  
GTWY  
GLN  
GLNS  
GRN  
GRNS  
GRV  
GRVS  
HBR  
HBRS  
HVN  
HTS  
HWY  
HL  
GLENS  
GREEN  
GREENS  
GROVE  
GROVES  
HARBOR  
HARBORS  
HAVEN  
HEIGHTS  
HIGHWAY  
HILL  
HILLS  
HLS  
HOLLOW  
HOUSE  
ÎNLET  
HOLW  
HSE  
INLT  
IS  
ISLAND  
ISLANDS  
ISLE  
ISS  
ISLE  
JCT  
JUNCTION  
JUNCTIONS  
JCTS  
115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Country  
Street Type  
Abbreviation  
United States of America  
KEY  
KY  
KEYS  
KYS  
KNL  
KNOLL  
KNOLLS  
LAKE  
KNLS  
LK  
LAKES  
LKS  
LANDING  
LANE  
LNDG  
LN  
LIGHT  
LGT  
LIGHTS  
LOAF  
LGTS  
LF  
LOCK  
LCK  
LOCKS  
LODGE  
LOOP  
LCKS  
LDG  
LOOP  
MNR  
MNRS  
MKT  
MDW  
MDWS  
ML  
MANOR  
MANORS  
MARKET  
MEADOW  
MEADOWS  
MILL  
MILLS  
MLS  
MSN  
MTWY  
MT  
MISSION  
MOTORWAY  
MOUNT  
MOUNTAIN  
MOUNTAINS  
NECK  
MTN  
MTNS  
NCK  
ORCHARD  
OVAL  
ORCH  
OVAL  
OPAS  
PARK  
PARKS  
PKWY  
PKWYS  
PASS  
PSGE  
PATH  
PIKE  
PNE  
OVERPASS  
PARK  
PARKS  
PARKWAY  
PARKWAYS  
PASS  
PASSAGE  
PATH  
PIKE  
PINE  
PINES  
PNES  
PL  
PLACE  
PLAIN  
PLN  
PLAINS  
PLAZA  
PLNS  
PLZ  
POINT  
PT  
POINTS  
PORT  
PTS  
PRT  
PORTS  
PRTS  
116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Country  
Street Type  
Abbreviation  
United States of America  
PRAIRIE  
RADIAL  
RAMP  
PR  
RADL  
RAMP  
RNCH  
RDG  
RDGS  
RV  
RANCH  
RIDGE  
RIDGES  
RIVER  
ROAD  
RD  
ROADS  
ROUTE  
RDS  
RTE  
ROW  
ROW  
RUE  
RUN  
SHL  
RUE  
RUN  
SHOAL  
SHOALS  
SHORE  
SHORES  
SKYWAY  
SPRING  
SPRINGS  
SPUR  
SHLS  
SHR  
SHRS  
SKWY  
SPG  
SPGS  
SPUR  
SPURS  
SQ  
SPURS  
SQUARE  
SQUARES  
STATION  
STRAVENUE  
STREAM  
STREET  
STREETS  
SUMMIT  
TERRACE  
THROUGHWAY  
TRACE  
SQS  
STA  
STRA  
STRM  
ST  
STS  
SMT  
TER  
TRWY  
TRCE  
TRAK  
TRFY  
TRL  
TRACK  
TRAFFICWAY  
TRAIL  
TUNNEL  
TURNPIKE  
UNDERPASS  
UNION  
TUNL  
TPKE  
UPAS  
UN  
UNIONS  
VALLEY  
VALLEYS  
VIADUCT  
VIEW  
UNS  
VLY  
VLYS  
VIA  
VW  
VIEWS  
VWS  
VLG  
VILLAGE  
VILLAGES  
VILLE  
VLGS  
VL  
VISTA  
VIS  
117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Country  
Street Type  
Abbreviation  
United States of America  
WALK  
WALKS  
WALL  
WAY  
WALK  
WALK  
WALL  
WAY  
WAYS  
WL  
WAYS  
WELL  
WELLS  
WLS  
Street types - Canada  
Country  
Street Type  
Abbreviation  
ABBEY  
ABBEY  
ACRES  
ALLEE  
ALLEY  
AUT  
Canada  
ACRES  
ALLEE  
ALLEY  
AUTOROUTE  
AVENUE (English)  
AVENUE (French)  
BAY  
AVE  
AV  
BAY  
BEACH  
BEACH  
BEND  
BLVD  
BEND  
BOULEVARD (English)  
BOULEVARD (French)  
BY-PASS  
BOUL  
BYPASS  
BYWAY  
CAMPUS  
CAPE  
CAR  
BYWAY  
CAMPUS  
CAPE  
CARRÉ  
CARREFOUR  
CENTER (English)  
CENTER (French)  
CERCLE  
CARREF  
CTR  
C
CERCLE  
CHASE  
CH  
CHASE  
CHEMIN  
CIRCLE  
CIR  
CIRCUIT  
CIRCT  
CLOSE  
COMMON  
CONC  
CRNRS  
COTE  
COUR  
CRT  
CLOSE  
COMMON  
CONCESSION  
CORNERS  
COTE  
COUR  
COURT  
COVE  
COVE  
CRES  
CROIS  
CROSS  
CRESCENT  
CROISSANT  
CROSSING  
118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Country  
Street Type  
Abbreviation  
Canada  
CUL-DE-SAC  
DALE  
CDS  
DALE  
DELL  
DELL  
DIVERSION  
DRIVE  
DIVERS  
DR  
ÉCHANGEUR  
END  
ECH  
END  
ESPLANADE  
ESTATES  
EXPRESSWAY  
EXTENSION  
FARM  
ESPL  
ESTATE  
EXPY  
EXTEN  
FARM  
FIELD  
FOREST  
FWY  
FIELD  
FOREST  
FREEWAY  
FRONT  
FRONT  
GDNS  
GATE  
GLADE  
GLEN  
GREEN  
GRNDS  
GROVE  
HARBR  
HTS  
GARDENS  
GATE  
GLADE  
GLEN  
GREEN  
GROUNDS  
GROVE  
HARBOUR  
HEIGHTS  
HIGHLANDS  
HIGHWAY  
HILL  
HGHLDS  
HWY  
HILL  
HOLLOW  
ÎLE  
HOLLOW  
iLE  
IMPASSE  
ISLAND  
KEY  
IMP  
ISLAND  
KEY  
KNOLL  
KNOLL  
LANDING  
LN  
LANDING  
LANE  
LIMITS  
LMTS  
LINE  
LINE  
LINK  
LINK  
LOOKOUT  
LOOP  
LKOUT  
LOOP  
MALL  
MALL  
MANOR  
MAZE  
MANOR  
MAZE  
MEADOW  
MEWS  
MONTEE  
MOOR  
MOUNT  
MTN  
MEADOW  
MEWS  
MONTEE  
MOOR  
MOUNT  
MOUNTAIN  
119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Country  
Street Type  
Abbreviation  
Canada  
ORCHARD  
PARADE  
PARC  
ORCHARD  
PARADE  
PARC  
PK  
PARK  
PARKWAY  
PASSAGE  
PATH  
PKY  
PASS  
PATH  
PTWAY  
PINES  
PL  
PATHWAY  
PINES  
PLACE (English)  
PLACE (French)  
PLATEAU  
PLAZA  
PLACE  
PLAT  
PLAZA  
PT  
POINT  
PORT  
PORT  
PVT  
PRIVATE  
PROMENADE  
QUAY  
PROM  
QUAY  
RANG  
RANG  
RG  
RANGE  
RIDGE  
RIDGE  
RISE  
RD  
RISE  
ROAD  
ROND POINT  
ROUTE  
ROW  
RDPT  
RTE  
ROW  
RUE  
RUE  
RUELLE  
RUN  
RLE  
RUN  
SENTIER  
SQUARE  
STREET  
SUBDIVISION  
TERRACE  
TERASSE  
THICKET  
TOWERS  
TOWNLINE  
TRAIL  
SENT  
SQ  
ST  
SUBDIV  
TERR  
TSSE  
THICK  
TOWERS  
TLINE  
TRAIL  
TRNABT  
VALE  
VIA  
TURNABOUT  
VALE  
VIA  
VIEW  
VIEW  
VILLGE  
VISTA  
VOIE  
VILLAGE  
VISTA  
VOIE  
120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Country  
Street Type  
Abbreviation  
Canada  
WALK  
WAY  
WALK  
WAY  
WHARF  
WOOD  
WYND  
WHARF  
WOOD  
WYND  
121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Points of Interest categories  
Icon Description  
Icon  
Description  
Airline Access  
Airport  
Amusement Park  
Bank  
Arts or Cultural Center  
Beach  
Boat Ramp  
Breakdown Service, Car Repair Facility  
Camping Ground  
Caravan Park  
Building  
Car Dealer  
Cash Dispenser  
Centre of Settlement  
Cinema  
Casino  
Church  
City Center  
College or University  
Company  
Concert Hall, Music Center, Opera  
Convention Center, Exhibition Center  
Cultural Center  
Doctor  
Courthouse  
Dentist  
Drive-Through Bottle Shop  
Emergency Medical Service  
Fire Station  
Embassy  
Ferry Terminal  
Frontier Crossing  
Golf course  
General POI  
Government Office  
Hotel or Motel  
Hospital/Polyclinic  
Ice Skating Rink  
Leisure Center, Sports Center  
Military Cemetery  
Mountain Pass  
Museum  
Important Tourist Attraction  
Library  
Monument  
Mountain Peak  
Night life  
Open Parking Area  
Gas station  
Park and Recreation Area  
122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Icon Description  
Icon  
Description  
Pharmacy  
Place of Worship  
Police Station  
Railway Station  
Rest Area  
Post Office  
Rent-a car Parking  
Restaurant Area  
School  
Scenic or Panoramic View  
Shop  
Shopping Centre  
Swimming Pool  
Theatre  
Stadium  
Tennis Court  
Tourist Information Office  
Vehicle Equipment Provider  
Water Sports  
Travel Agency  
Veterinarian  
Winery  
Yacht Basin  
Zoological park (zoo)  
123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Reference  
Specifications  
Specifications  
General  
Remote control  
Operating voltage: DC5V  
Frequency range: 2.4 – 2.483GHz  
Nominal output power: 0 dBm  
Modulation: FSK  
Operating voltage range: DC10.8–16.0V  
Maximum operation current: 2.5A  
Grounding system: car battery negative pole  
AC adapter  
Camera  
Effective Pixels: 1.3 M  
Operating voltage range: AC85-265V  
Maximum operation current: 2.5A  
Car adapter  
Resolution: 1304 x 968 SXGA  
Aperture range: F 4.9mm  
Battery  
Operating voltage: DC12V  
Capacity: 1350mAH (iCN 720)  
Capacity: 1890mAH (iCN 750)  
Type: Lithium-ion  
Operating voltage range: DC8–24V  
Maximum operation current: 2.5A  
TFT monitor  
Hardware  
Screen diagonal: 4 inches (105mm)  
Usable display area: 87.84mm (W) x 49.8mm (H)  
Resolution: WQVGA 480 (W) x 272 (H) pixels  
Processor: Intel PXA270 312Mhz  
RAM: 64MB  
ROM: 64MB  
Brightness: 180cd/m (center brightness after 30  
minutes)  
Internal CF card: 512MB (iCN 720)  
HDD: 4GB (iCN 750)  
Top viewing angle: 58°  
SD/MMC Memory Expansion  
Environment  
Bottom viewing angle: 52°  
Horizontal viewing angle: +66°  
Dimensions  
Operating temperature: -10°C–+60°C  
Storage temperature: -30°C–+70°C  
Operating humidity: 45%–80% RH  
Storage humidity: 30%–90% RH  
EMC: e-Mark, FCC, CE, C Tick, RSS-210  
Operating shock: 4G  
Dimensions: 136mm (W) x 77mm (H) x 32mm (D)  
Net weight: 300g  
Non-operating shock: 75G  
124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Support information  
Support information  
Support for Australia  
Support for Europe  
Navman Australia Pty Ltd  
PO Box 479  
Navman Europe Ltd  
4G Gatwick House  
Peeks Brook Lane, Horley  
Surrey RH6 9ST  
Gladesville, NSW 2111  
Australia  
United Kingdom  
Support: http://support.navman.com  
Website: http://www.navman.com  
Support: http://support.navman.com  
Website: http://www.navman.com  
Support for New Zealand  
Support for US and Canada  
Navman New Zealand  
PO Box 68-155 Newton  
Auckland  
Navman USA Inc  
5275 Capital Boulevard  
Raleigh, NC 27616-2925  
United States of America  
New Zealand  
Phone: 866-9-NAVMAN  
Support: http://support.navman.com  
Website: http://www.navman.com  
Support: http://support.navman.com  
Website: http://www.navman.com  
125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iCN 700 series | Notes  
Notes  
126  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MN000538A-G  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Washer W3203 User Manual
MTD Tiller 410 Thru 420 User Manual
NEC DVD Recorder NDR50 User Manual
Nokia Bluetooth Headset BH 904 User Manual
Olympus Camera Accessories PPO E01 User Manual
Optimus Cassette Player SCP 97 User Manual
Oricom Amplified Phone CARE80 User Manual
Panasonic DVD Recorder DMR XW300 User Manual
Panasonic Smoke Alarm 4301 User Manual
Panasonic Telephone KX T7735 User Manual