iCN 550
with Smart™ 2005 Release 2 for iCN 550
User Manual
English - United States / Canada
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Contents
Box Contents
1. Introduction
5
7
2. iCN Features
8
3 Starting your iCN
4. Setting your Destination
By Address
12
15
17
20
23
24
29
33
34
35
37
42
55
57
58
60
65
66
74
By POI
5. Using the 2D Map Screen to Plan a Route
6. Multi-stop Trips
7. Viewing your Route
8. The 2D Map Screen Pop-up Menu
9. Avoiding an Area
10. Route Demonstrator
11. Favorites and My Home
12. Preferences
13. Smart Desktop
14. Updating your iCN
15. Installing Maps Using Smart Desktop
16 Smart Desktop Advanced Features
17. Accessories
Appendix: Street Types
Support Information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 | User Manual
Important Safety Information
Please Read Carefully Before Installing
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
CAUTION used without the safety alert symbol indicates a potentially
hazardous situation which, if not avoided, may result in property damage.
Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle’s
safety or make it illegal to operate in some jurisdictions.
Follow all product instructions and all instructions in your vehicle owner’s manual regarding accessories
or modifications.
Consult your country’s and/or state’s laws regarding operation of a vehicle with any accessories or modifications.
It is your sole responsibility to place, secure and use the iCN 550 in a manner that will not cause
accidents, personal injury or property damage. Always observe safe driving practices.
Mount the iCN 550 in a position that is secure and does not obstruct the driver’s view.
Do not mount the iCN 550 in a way that may interfere with the safe operation of the vehicle, the
deployment of air bags or other safety equipment.
Do not operate the iCN 550 while driving.
Before you use your iCN 550 for the first time, make yourself familiar with your device and its operation.
On main roads, the distance to an exit calculated by the iCN 550 may be further than the distance
shown on road signs. Road signs show the distance to the start of an exit while your iCN 550 shows the
distance to the next intersection, i.e., the end of the exit ramp or road. To prepare to exit a road, always
follow distance information on road signs.
Do not handle the iCN 550 while it is hot. Let the product cool, out of direct sunlight.
Do not expose the iCN 550 to direct sunlight in an unattended vehicle for prolonged periods.
Overheating may damage the unit.
To discourage theft, do not leave the iCN 550 in plain view in an unattended vehicle.
Failure to adhere to these instructions may lead to death, serious injury, or property damage.
Navman disclaims all liability for use of the iCN 550 that causes or contributes to death, injury,
or property damage or that violates any law. Navman is not responsible for the accuracy of any
traffic-related information supplied by other parties and disclaims all liability for any accident,
injury or property damage resulting from reliance on such information.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Thank you for purchasing your Navman iCN 550. We hope you enjoy your new GPS transferable
navigation system.
This user manual will help you Drive-Away™ with your iCN, straight out of the box.
Navman welcomes your feedback. To contact us or visit our website, see Support Information on page 74.
Box Contents
Protective
Carry-Case
AC Power Pack
Note: The number of plugs depends
on the country of purchase
Mounting Bracket
Power Adaptor
CD-ROMs, including:
• Smart2005 software including Smart Desktop
• Map data
• User Manual (PDF format) and Adobe® Reader®
Note: the number of disks varies with country of purchase
Documentation, including:
• User Manual
• In-Car Installation Guide
• Software Product License/
Limited Warranty Agreement
• Registration Card
5
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
6
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
1. Introduction
Whether you travel in your own country or elsewhere, the iCN will direct you to your destination without
the need for map-books and second-hand instructions.
The Global Positioning System (GPS) is available free of charge, at any time, and is accurate to within
5 m (15 ft). The maps on your iCN provide street-level detail for door-to-door navigation, including Points
of Interest (POIs) such as accommodation, gas stations, railway stations and airports.
Use this manual to learn how to operate your iCN efficiently and safely; discover all the different
features available to you.
GPS and GPS Signals
The Global Positioning System is a network of satellites that transmit accurate time and position
information worldwide. GPS receivers receive signals from these satellites and use the information
to determine an exact location. GPS satellites orbit the earth at around 20,200 kilometers (12,000
miles). While a GPS receiver can detect signals from up to 12 satellites at any time, only three
signals are needed to provide a position or “GPS fix” (latitude and longitude) for vehicle navigation
systems.
The iCN GPS antenna receives GPS signals. To receive GPS signals, ensure that the iCN is
outdoors, or in a vehicle outdoors, and the GPS antenna has an unobstructed view of the sky. The
iCN can operate in all types of weather except snowfall.
GPS signals may also be blocked by heat-reflective or heated windscreens. If your vehicle is fitted
with such a windscreen, you will need to purchase an external antenna for your iCN to receive GPS
signals. See page 65
7
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
2. iCN Features
We recommend that you familiarise yourself with the iCN’s basic operations, such as using the stylus,
4-way toggle and Volume control.
Component
Description
Displays maps and menu options.
1
Touch Screen
Tap with the stylus to select menu options or enter information.
Displays the Select POI screen, listing the nearest gas stations to
your current position.
Fuel
2
3
Displays the Select POI screen, listing the nearest public parking lot
to your current position.
Park
Displays the Main Menu screen.
Menu
ESC
4
5
Press and hold to reset the iCN.
Cancels an action, returns to the previous screen or deletes the
last text character on the Keyboard screen; hold down for longer to
delete a whole line at once.
Displays a smaller area in greater detail on the Map and 3D Map
screens, or press and hold to increase the screen brightness.
+
6
7
8
Amber indicates that the battery is charging;
Green indicates that the battery is fully charged.
Charge Indicator
Displays a larger area in less detail on the Map and 3D Map
screens, or press and hold to decrease the screen brightness.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Component
Description
Selects Main Menu options, keyboard characters and preferences,
moves around the 2D Map screen to select a destination, and
scrolls through lists, such as lists of search results. Press center to
confirm the selected menu option, text or preference; press up or
down to adjust the viewing angle on the 3D Map screen.
4-Way Toggle
9
Cycles through the 2D Map 3D Map Next Turn and Next 5 Turns
screens; displays additional preferences or search-result screens,
when available.
Page
10
11
Infrared Receiver
Receives signals from the remote control.
Side Components
Component
Description
1
2
Reset
Resets the iCN; press using the stylus.
Rotate up or down briefly to hear a sound test; rotate and hold to
adjust volume.
Volume Control
Power Socket
Connection socket for vehicle power adaptor or AC power pack
cable.
3
USB Socket
Connection socket for USB cable to your computer.
4
5
6
Slot for memory card. Memory card must be inserted with label
facing forward.
SD/MMC Slot
Headphone Socket
Connection socket for headphones or earphones (not included).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Back Components
Component
Description
Must be set to ON for normal use. Switching to OFF will turn the
battery off, saving battery power.
1
2
3
4
Battery Switch
Outputs voice commands and warnings. Use the Volume control
to adjust.
Speaker
Receives signals from GPS satellites when lifted out to the horizontal
position.
GPS Receiver
External Antenna
Socket
Connection socket for GPS mMCX External Antenna (not included;
see page 65). Protected by rubber cover.
Top Components
Component
Description
Turns the iCN on or off.
1
2
Power
When off, the iCN enters a suspended state.
Used to tap the screen to make selections and enter information;
Pull out of the slot to use; store in the slot when not using your iCN.
Stylus
10
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Stylus
The stylus is your input device. Pull the stylus out of the slot and extend it for ease of use. Store it in
the slot when not in use.
• Tap the screen with the stylus to select.
• Tap and drag the screen with the stylus to navigate the 2D Map and 3D Map screens.
Internal Battery
The iCN has an internal battery that when fully charged should power the iCN for 4 hours.
You can monitor battery power at the Power Status screen:
Main Menu Preferences More Preferences Hardware Power Status
Charging the Battery
When the battery is charging, the Charge Indicator is amber; when the battery is fully
charged, the Charge Indicator is green
• To charge the iCN in a vehicle, plug the vehicle power adaptor into the Power Socket on
the side of the iCN and the other end into the vehicle power socket.
• To charge the iCN using an electrical wall outlet, plug the AC power cable into the Power
Socket on the side of the iCN and the AC power pack into the wall outlet.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
3. Starting your iCN
Before you begin, check if your vehicle is fitted with a heat-reflective or heated windshield. If so, you will
need to purchase an external antenna for your iCN to receive GPS signals. See page 65.
Step One: Position the iCN in your Vehicle
Follow the safety notice on page 7 to ensure that the iCN does not obstruct the driver’s view, or
interfere with the operation of vehicle airbags and safety devices. Position the iCN in your vehicle
according to the instructions in your In-Car Installation Guide
The Main Menu screen provides access to all of the iCN’s functions, including navigating to a
destination.
Step Two:
1. If the Battery Switch is OFF, then remove and use the stylus to switch it ON
2. Gently pull the bottom of the GPS receiver away from the iCN.
The receiver will lift out to a horizontal position, allowing it to obtain a GPS fix.
3. Press
The iCN will turn on.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Step Three: Warning Screen
1. Read the warning message.
2. Tap Accept to confirm that you understand.
The first Tutorial screen will display.
Step Four: Tutorial Screens
1. Read the Tutorial screen.
• To prevent the Tutorial from displaying on startup, select the Do not show Tutorial on
startup check box.
• You can view the Tutorial again while using your iCN. See page 54 for details
2. Tap
to move through each Tutorial screen.
The Main Menu screen will display.
Main Menu Screen
• Use the stylus to select a Main Menu option
• Return to the Main Menu screen at any time by pressing
• The Route Information option is only available when a route has been calculated.
See page 32 for more information
13
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
To Turn your iCN Off
When your iCN is off, it enters a suspended state and the system stops operating. When you turn
your iCN on, it returns to the screen you were last viewing.
1. Remove the iCN from the suction-mount bracket if necessary, then gently push the GPS
receiver back towards the iCN.
The receiver will click into place.
2. Press
The iCN will enter a suspended state and the screen will turn off.
Power-Saving Suspended State
To save battery power, your iCN will automatically enter a suspended state after a set period of
time. You can change the default suspended-state settings at the Power Options screen.
Main Menu Preferences More Preferences Hardware Power Options
Note: if you are not going to be using the iCN for an extended period of time, switch the
Battery Switch to OFF to save battery power.
To Reset your iCN
Normally you do not need to reset your iCN; however, should your iCN not turn on or not respond,
you can reset it to solve the problem.
To reset your iCN, either:
a. Press and hold
The message Reset Device? will display. Tap Yes
b. Use the stylus to press the Reset button on the top of the iCN.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
4. Setting your Destination
For your safety, enter destination information before you start a journey.
Do not operate the iCN while driving
Select a destination using the Destination Keyboard and Preview screens, which used together form a
destination wizard.
This section describes how to use each of these screens and provides two case studies to help guide
you through setting your destination.
The Destination screen is used to select your destination by area, street, postal code/ZIP code,
Point of Interest (POI), intersection, city, town, country or state.
As you specify each part of the address, it will display in the You are going to field at the top of the screen.
The available options will change to reflect the parts of the address still to be completed.
The Keyboard screen will display when you are required to enter text, such as when searching for
a street name. As you select each character, the first two results will display. Tap
to see more
search results. Search results will be listed in matching order, with the closest matches appearing at
the top of the list. If your destination appears in the list at the top of the screen, tap on it to select it.
The Keyboard screen can display in three modes: alphabet, alternate and number/symbol.
Figure 1. Alphabet Keyboard
Figure 2. Alternate Keyboard
15
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Figure 3. Number/Symbol Keyboard
As you select each character, the first two results will display. Tap
to see more search results.
• To select a character or a search result, tap the character or search result.
• To delete a character, press ESC or tap <<; hold ESC to delete the line.
• To display the number/symbol Keyboard screen (Figure 3), tap 123
• To display the alternate Keyboard screen (Figure 2), press +, or tap Alt
• To display the alphabet Keyboard screen (Figure 1), press , or tap ABC
The Preview screen is used to display a preview of your destination before navigating to it, saving it
as a Favorite or displaying it on the 2D Map screen.
• To display a smaller area in greater detail (zoom in), press +
• To display a larger area in less detail (zoom out), press
• To display your destination on the 2D Map screen, tap the preview map
The 2D Map screen will display.
• To save your destination as a Favorite, tap Save
The New Favorite screen will display. See Favorites and My Home on page 37.
• To calculate the route and open the 3D Map screen, tap Go
The 3D Map screen will display.
• To view Point of Interest (POI) details when your destination is a POI, tap
The POI Detail screen will display.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Setting your Destination by Address
Step One: Open the
a. From the Main Menu, tap Go To
b. From the Go To screen, tap Address or POI
The Destination screen will display.
Important Note: The first time you are setting your destination, the Select Country screen
will display instead of the Destination screen. Go to Step Two: Select the Country of
Destination, step b
The next time you perform this procedure, the Destination screen will open as expected.
Step Two: Select the Country of Destination
a. From the Destination screen, tap Change country or Change country or state
The Select country screen will display.
b. Select a country from the list.
The Select state screen will display.
Step Three: Select the State of Destination
I
a. Select a state from the list.
The Destination screen will display.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Step Four: Find the Town or City of Destination
a. From the Destination screen, tap Find town/city
The Keyboard screen will display.
b. Use the Keyboard screen to find the town or city of your destination. For information on
using the Keyboard screen, see pages 15-16
The Destination screen will display.
Step Five: Find the Street of Destination
a. From the Destination screen, tap Find street
The Keyboard screen will display.
b. Use the Keyboard screen to find the street of your destination. For information on using
the Keyboard screen, see pages 15-16
The Destination screen will display.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Step Six: Find the House Number of Destination
a. From the Destination screen, tap Enter house number
The Keyboard screen will display.
Note: If the Enter house number option is not displayed, house numbers are not available
for your selected street. Tap Go to center of street to display the Preview screen. Go to
step c
b. Use the Keyboard screen to find the house number of your destination. For information
on using the Keyboard screen, see pages 15-16
The Preview screen will display.
c. Complete one of the following:
• To calculate the route and open the 3D Map screen, tap Go
The 3D Map screen will display.
• To display the destination on the 2D Map screen, tap the preview map
The 2D Map screen will display.
• To save the destination as a Favorite, tap Save
The New Favorite screen will display. See Favorites and My Home on page 37.
• To change your destination, tap ESC
The Destination screen will display.
To return to the Main Menu, press
19
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Setting your Destination by POI
A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the
map. POIs are grouped by type, such as parks and museums.
Step One: Open the Destination screen
a. From the Main Menu, tap Go To
b. From the Go To screen, tap Address or POI
The Destination screen will display.
Important Note: The first time you are setting your destination,the Select country screen
will display instead of the Destination screen. Go to Step Two: Select the Country of
Destination, step b
The next time you perform this procedure, the Destination screen will open as expected.
Step Two: Select the Country of Destination
a. From the Destination screen, tap Change country or Change country or state
The Select country screen will display.
b. Select a country from the list.
The Select state screen will display.
Step Three:
a. Select a state from the list.
The Destination screen will display.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Step Four: Select the Type of POI
Note: To narrow the search for a type of POI, you can first search by Town or City
a. From the Destination screen, tap Find Point of Interest
The Select POI screen will display.
b. Select a POI type from the list.
The Keyboard screen will display.
c. Use the Keyboard screen to find the POI. For information on using the Keyboard screen,
see pages 15-16
The Preview screen will display.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
d. Complete one of the following:
• To calculate the route and open the 3D Map screen, tap Go
The 3D Map screen will display.
• To display the destination on the 2D Map screen, tap the preview map
The 2D Map screen will display.
• To save the destination as a Favorite, tap Save
The New Favorite screen will display. See Favorites and My Home on page 37.
• To change your destination, tap ESC
The Destination screen will display.
• To view Point of Interest (POI) details when your destination is a POI, tap
The POI Detail screen will display.
To return to the Main Menu, press
22
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
5. Using the 2D Map screen to
Plan a Route
You can plan a route directly from the 2D Map screen using the Pop-up menu.
1. From the Main Menu, tap Map
The 2D Map screen will display.
• Move around the 2D Map screen using the 4-way toggle or stylus.
• To display a smaller area in greater detail, press +
• To display a larger area in less detail, press
2. Tap the Map screen or press the 4-way toggle button to display the cross-hairs.
• To remove the cross-hairs press ESC
3. Drag the intersection of the cross-hairs to a destination. Where the cross-hairs intersect on a
street, the street will highlight and the street name will display.
4. Tap the intersection of the cross-hairs, or press the 4-way toggle button to select the street as
your destination.
The Pop-up menu will display.
5. Select Navigate to
The route is calculated and displayed on the 3D Map screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
6. Multi-stop Trips
You can use the Multi-stop Trip screen to set multiple destination points for your trip. Your route will be
calculated to go via each of these points in the specified order.
Destination points can be added via the Multi-stop Trip screen or by selecting Show Details from the
pop-up menu on the 2D Map screen, then Add to Trip
You can save up to 200 multi-stop trips, each with up to 14 destination points.
Step One: Start your Multi-stop Trip
a. From the Main Menu tap Multi-stop Trip
The Multi-stop Trip screen will display.
b. Tap Add
The Add to Trip screen will display.
c. Tap Address or POI
The Destination screen will open.
Note: You can also add destination points using Favorites, recent destinations and nearest
Points of Interest.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Step Two: Select the Country of your Destination Point
a. If the destination point is in a different country to the previous destination point, tap
Change country or Change country or state
The Select country screen will display.
b. Select a country from the list.
The Destination screen will display.
Step Three: Select the State of your Destination Point
a. Select a state from the list.
The Destination screen will display.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Step Four: Find the Town or City of your
Destination Point
a. From the Destination screen, tap Find town/city
The Keyboard screen will display.
b. Use the Keyboard screen to find the town or city of your destination. For information on
using the Keyboard screen, see pages 15-16
The Destination screen will display.
Step Five: Find the Street of your Destination Point
a. From the Destination screen, tap Find street
The Keyboard screen will display.
b. Use the Keyboard screen to find the street of your destination point. For information on
using the Keyboard screen, see pages 15-16
The Destination screen will display.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Step Six: Find the House Number of your
Destination Point
a. From the Destination screen, tap Enter house number
The Keyboard screen will display.
Note: If Enter house number option is not displayed, house numbers are not available for
your selected street. Select Go to center of street to display the Preview screen. Go to
step c
b. Use the Keyboard screen to find the house number of your destination point. For
information on using the Keyboard screen, see pages 15-16
The Preview screen will display.
c. Select Add to Trip
The Multi-stop Trip screen will display, listing your destination point.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
d. Complete one of the following:
Note: Destination points added, updated or deleted after a multi-stop trip has
commenced will not affect the current route.
If you want to ...
Then ...
i tap Add
add another destination point
The Add to Trip screen will display.
Note: Destination points added after a
multi-stop trip has commenced will not
be included in the current route.
ii tap Address
The Destination screen will display.
iii go to Step Three: Find the Area of
your Destination Point
change the order of your destination
points
i select a destination point to move
from the list.
The Preview screen will display.
ii tap Move
The Multi-stop Trip screen will display.
iii use the 4-way toggle to move the
selected destination point to the
correct position
calculate the route
tap Go
The 3D Map screen will display the
calculated route.
delete all destination points
delete one destination point
tap Clear
i
select a destination point to delete
from the list.
The Preview screen will display.
ii tap Delete From Trip
The Multi-stop Trip screen will display.
save the multi-stop trip as a Favorite
i
tap Save
The New Favorite screen will display.
ii tap Save
The Favorite will save and the Multi-
stop Trip screen will display.
To return to the Main Menu screen, press
Skipping a Destination Point
You can modify a multi-stop trip at any time from the Multi-stop Trip screen; however, if you have
already commenced a trip, changes will not affect the current route:
Main Menu Multi-stop Trip
To skip a destination point during a multi-stop trip, complete the following:
1. Press
to return to the Main Menu screen
The Main Menu screen will display.
2. Tap Route Information
The Route Information screen will display.
3. Tap Skip Next Dest.
The next destination point will be skipped and the route recalculated to the following
destination point.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
7. Viewing your Route
Once a route has been calculated, you can view it in several ways. Press
to cycle through the screens.
2D Map Screen
The 2D Map screen is always oriented North and shows your current position (if a GPS fix is active)
and surrounding street names. If a route has been calculated, the route and turns are highlighted.
You can plan a route from the 2D Map screen. See page 23 for further details.
To view the 2D Map screen, either tap Map on the Main Menu screen or press
to cycle through
the screens when a route has been calculated
•
•
•
To display a smaller area in greater detail, press +
To display a larger area in less detail, press
To display the cross-hairs, tap the map. Tap the intersection of the cross-hairs, or press the
4-way toggle to display the Pop-up menu.
Name of the next
location
North-oriented compass
Tap to display the Satellite
Signal Strengths screen.
Direction of the next turn.
Tap to hear next
instruction.
Additional information can
display here. Tap to scroll the
options. You must have a
route calculated to view these
options:
Your next turn is highlighted
in a different color from
future turns. The color will
depend on the theme you
are using.
Your current position is
marked with
• Speed
• Time
• Heading
• Distance to Turn
• Distance to Go
• ETA (Estimated Time of
Arrival)
• Time to Go
Displays either a description of the
information in the bottom right hand
corner of the screen or your current
location. Tap to display the Main Menu
screen.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
3D Map Screen
The 3D Map screen displays when a route is calculated, oriented to the traveling direction with an
adjustable horizon.
It is not possible to plan a route directly from this screen.
To view the 3D Map screen when a route has been calculated, press
to cycle through the screens.
•
•
•
•
To adjust the viewing angle, press the 4-way toggle up or down
To display a smaller area in greater detail, press +
To display a larger area in less detail, press
To display the Go To Pop-up summary press the 4-way toggle
Name of the next
location
North-oriented compass
Tap to display the Satellite
Signal Strengths screen.
Direction of the next turn.
Tap to hear next
instruction.
Additional information can
display here. Tap to scroll the
options. You must have a
route calculated to view these
options:
Your next turn is
highlighted in a different
colour from future turns.
The colour will depend on
the theme you are using.
• Speed
• Time
• Heading
Your current position is
marked with
• Distance to Turn
• Distance to Go
• ETA (Estimated Time of
Arrival)
• Time to Go
Displays either a description of the
information in the bottom right hand
corner of the screen or your current
location. Tap to display the Main Menu
screen.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
The Next Turn screen displays information that you need for the next turn, the direction of the turn
and the distance to the turn. A route must have been calculated for this screen to be able to display.
Access to this screen is controlled by the Display preferences screen. See page 44.
To view the Next Turn screen when a route has been calculated, press
to cycle through the screens.
Map of the next turn
The next instruction
Additional information can
display here. Tap to scroll
the options:
• Speed
• Time
• Heading
Direction of next turn.
Tap to hear next instruction.
• Distance to Turn
• Distance to Go
• ETA (Estimated Time of
Arrival)
Distance to the next turn
• Time to Go
Displays either a description of the
information in the bottom right hand
corner of the screen or your current
location. Tap to display the Main Menu
screen.
The Next 5 Turns screen displays the next five turns of your route, the turn direction, the street name
and the distance to the turn. A route must have been calculated for this screen to be able to display.
Access to this screen is controlled by the Display preferences screen. See page 44.
To view the Next 5 Turns screen when a route has been calculated, press
to cycle through the screens.
The next turn is
highlighted at the top
of the list.
Distance to the next turn
Additional information can
display here. Tap to scroll
the options:
• Speed
• Time
• Heading
• Distance to Turn
• Distance to Go
• ETA (Estimated Time of
Arrival)
Displays either a description of
the information in the bottom
right hand corner of the screen
or your current location. Tap to
display the Main Menu screen.
• Time to Go
Back-On-Track Automatic Rerouting
Your route is re-directed if you make a wrong turn. The ? symbol will display in the upper left corner of
the 3D Map and Next Turn screens while the route recalculates.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Route Information Screen
The Route Information screen provides information about your current route and lets you skip a trip
destination point or cancel a route.
The screen is only available from the Main Menu when you are navigating a route:
Main Menu Route Information
Show Route
Tap Show Route to display your entire route on the 2D Map screen.
Instruction List
Tap Instruction list to display the Instruction List screen.
The Instruction List screen is similar to the Next 5 Turns screen (see Page 31) except that it
displays your entire route.
• Press
to cycle through the instruction list.
Summary
Tap Summary to display the Route Summary screen containing your From and To addresses,
Estimated Time to arrival and the Distance remaining to your destination.
If you are navigating a multi-stop trip, the information displayed will relate to your next
destination point.
Skip Next Destination
Tap Skip Next Dest. to skip the next destination point of your trip.
Only available when navigating a multi-stop trip.
Cancel Route
Tap Cancel Route to cancel the route.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
8. The 2D Map Screen
Pop-up Menu
The Pop-up menu allows you to access navigational functions from the 2D Map screen.
To display the Pop-up menu, complete the following:
1. From the Main Menu tap Map
The 2D Map screen will display.
•
•
•
Move around the 2D Map screen using the 4-way toggle or stylus.
To display a smaller area in greater detail, press +
To display a larger area in less detail, press
2. Tap the Map screen or press the 4-way toggle button to display the cross-hairs.
To remove the cross-hairs press ESC
•
3. Position the intersection of the cross-hairs on a destination point. Where the cross-hairs
intersect on a street, the street will highlight and the street name will display.
4. Tap the intersection of the cross-hairs, or press the 4-way toggle button to select the street as
your destination.
The Pop-up menu will display.
5. You can choose one of the following options:
Menu Option
Navigate To
Description
Calculates a route from your current location.
Sets the selected point as your departure point;
Set as Start Location
Add to Favorites
Smart will calculate and display the route to your destination.
Displays the New Favorite screen for you to add the selected point
as a Favorite
Displays the Address Details screen from which you can:
• View details of the selected point;
• Add the point to your multi-stop trip;
• Set the point as your destination point;
• Save the point as a Favorite.
Show Details
Add Avoid Area
Adds an Avoid Area for you to size.
Deletes the selected Avoid Area.
Delete Avoid Area
Displays the Select POI screen;
select the POI type, then the specific POI to navigate to.
Nearest POI
33
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
9. Avoiding an Area
You can calculate a route that avoids a specified area on the map. For example, you may want to avoid
an area that frequently experiences traffic problems. Up to ten Avoid Areas can be added. Avoid Areas
are displayed as shaded areas. If no alternative route around an Avoid Area exists, you will be routed
through an Avoid Area.
Adding an Avoid Area
1. From the Main Menu screen, tap Map
The 2D Map screen will display.
2. Tap the Map screen or press the 4-way toggle button to display the cross-hairs.
3. Use the stylus or 4-way toggle to position the intersection of the cross-hairs to the area
that you want to avoid.
4. Tap the intersection of the cross-hairs, or press the 4-way toggle button to display the
Pop-up menu.
5. Select Add Avoid Area
An Avoid Area is displayed.
6. Set the Avoid Area to the correct size and position using the 4-way toggle
7. Tap the Avoid Area or press the 4-way toggle to enable the Avoid Area.
Deleting an Avoid Area
1. From the Main Menu screen, select Map
The 2D Map screen will display.
2. Tap the Map screen and move the cross-hairs over the Avoid Area that you want to delete.
3. Tap the intersection of the cross-hairs, or press the 4-way toggle button to display the
Pop-up menu.
4. Select Delete Avoid Area
The Avoid Area is deleted.
Deleting all Avoid Areas
1. From the Main Menu screen, tap Preferences
2. From the Preferences screen, tap My Data
The My Data screen will display.
3 From the My Data screen, tap Clear Data
The Clear Data screen will display.
4. Select Clear Avoid Areas. When the warning dialog-box opens, select Yes
5. To return to the Main Menu, press
34
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
10. Route Demonstrator
The Route Demonstrator allows you to:
• Preview a route.
• Plan and view a route without a GPS fix, such as when you are inside a building.
Step One: Activate Route Demonstrator
1. From the Main Menu screen, tap Preferences
2. From the Preferences screen, tap Routing
The Routing screen will display.
3. Press
twice.
4. Select the Demonstrate Route check box.
5. Tap Save
The Main Menu screen will display.
Step Two: Select Departure Point
If you have a GPS fix, you do not need to select a departure point unless you want the
demonstrated route to start elsewhere.
1. From the Main Menu screen, tap Map
The 2D Map screen will display.
2. Tap the Map screen or press the 4-way toggle button to display the cross-hairs.
3. Position the intersection of the cross-hairs on your departure point. Where the cross-
hairs intersects on a street, the street will highlight and the street name will display.
4. Tap the intersection of the cross-hairs, or press the 4-way toggle button.
The Pop-up menu will display.
5. Select Set as Start Location
The Pop-up menu will close.
Step Three:
Set a destination either by using the Destination screen (see pages 15-22) or by using the
2D Map screen Pop-up menu and completing the following:
1. Tap the Map screen or press the 4-way toggle button to display the cross-hairs.
2. Position the intersection of the cross-hairs on your destination point. Where the cross-
hairs intersects on a street, the street will highlight and the street name will display.
3. Tap the intersection of the cross-hairs, or press the 4-way toggle button.
The Pop-up menu will display.
4. Select Navigate To
The Pop-up menu will close. The 3D Map screen will display the calculated route in
Route Demonstrator mode.
• If you have selected the Repeat check box on the Routing preferences screen, the
Route Demonstrator will continue to repeat the route.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
To Disable Route Demonstrator
1. Press
to display the Main Menu screen.
2. From the Main Menu screen, tap Preferences
3. From the Preferences screen, tap Routing
The Routing screen will display.
4. Press
twice.
5. Clear the Demonstrate Route check box.
6. Tap Save
The Route Demonstrator will be disabled. The Main Menu screen will display.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
11. Favorites and My Home
You can save up to 200 destinations as Favorites, one of which can be saved as My Home. My Home
can be any designated Favorite, but we recommend that it is your home or other common destination.
You can save a Favorite from the Preview screen after searching for an address, or from the Pop-up
Menu on the 2D Map screen.
Saving a Favorite
1. Either search for an address using the Destination and Keyboard screens as described in
Setting your Destination, pages 15-22, or create a multi-stop trip as described in Multi-stop
Trips, pages 24-28, until the Preview screen is displayed.
2. Tap Save
The New Favorite screen will display.
3. To change the name of the Favorite, tap the Name box.
The Enter text screen will display.
• To select a character, tap the character.
• To delete a character, press ESC or tap <<; hold ESC to delete the line.
• To display the number/symbol Enter text screen, tap 123
• To display the alternate Enter text screen, press +, or tap Alt
• To display the alphabet Enter text screen, press , or tap ABC
• After you have entered a name for the Favorite, tap Enter
The New Favorite screen will display.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
4. Complete one of the following:
• To save as My Home, tap Save as My Home
The Favorite is saved as My Home. The Go To screen will display.
• To save as a favorite, tap Save as Favorite
The Favorite is saved. The Go To screen will display.
Saving a Favorite from the 2D Map
1. From the Main Menu, select Map
The 2D Map screen will display.
2. Tap the Map screen or press the 4-way toggle button to display the cross-hairs.
3. Position the intersection of the cross-hairs. Where the cross-hairs intersect on a street, the
street will highlight and the street name will display.
4. Tap the intersection of the cross-hairs, or press the 4-way toggle button.
The Pop-up menu will display.
5. Select Add to Favorites
The New Favorite screen will display.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
6. To change the name of the Favorite, select the Name box.
The Enter text screen will display.
• To select a character, tap the character.
• To delete a character, press ESC or tap <<; hold ESC to delete the line.
• To display the number/symbol Enter text screen, tap 123
• To display the alternate Enter text screen, press +, or tap Alt
• To display the alphabet Enter text screen, press , or tap ABC
• After you have entered a name for the Favorite, tap Enter
The New Favorite screen will display.
7. Complete one of the following:
• To save as a favorite, tap Save as Favorite
The Favorite is saved. The Go To screen will display.
• To save as My Home, tap Save as My Home
The Favorite is saved as My Home. The Go To screen will display.
Editing the Name of the Favorite
1. From the Main Menu, tap Go To
2. From the Go To screen, tap Favorites
The Favorite screen will display.
3. Select a Favorite to edit.
The Preview Favorite screen will display.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
4. Tap the Name box.
The Enter text screen will display.
• To select a character, tap the character.
• To delete a character, press ESC or tap <<; hold ESC to delete the line.
• To display the number/symbol Enter text screen, tap 123
• To display the alternate Enter text screen, press +, or tap Alt
• To display the alphabet Enter text screen, press , or tap ABC
• After you have entered a name for the Favorite, tap Save
The New Favorite screen will display.
5. Complete one of the following:
• To save as My Home, tap Save as My Home
The Favorite is saved as My Home. The Go To screen will display.
• To save as a favorite, tap Save as Favorite
The Favorite is saved. The Go To screen will display.
Deleting a Favorite
1. From the Main Menu, tap Go To
2. From the Go To screen, tap Favorites
The Favorite screen will display.
3. Select a Favorite to delete.
The Preview Favorite screen will display.
4. Tap Delete
A Warning dialog box will display asking for confirmation to delete the Favorite.
5. Tap Yes
The Favorite is deleted. The Favorite screen will display.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Navigating to a Favorite
1. From the Main Menu, tap Go To
2. From the Go To screen, tap Favorites
The Favorite screen will display.
3. Select a Favorite.
The Preview Favorite screen will display.
4. Tap Go
The route is calculated and displayed on the 3D Map screen.
Navigating to My Home
1. From the Main Menu, tap Go To
2. From the Go To screen, tap My Home
The route is calculated and displayed on the 3D Map screen.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
12. Preferences
You can modify the following preferences to suit your needs.
Screen Brightness
1. Press and hold either the + or button to display the Brightness scale.
+
2. To increase screen brightness, press ; to decrease screen brightness, press
The Brightness scale comprises ten rectangular boxes in a row. As screen brightness is
increased, the first seven boxes progressively turn from gray to green; the last three turn red.
You can also adjust brightness from the Screen preference screen. See page 51.
1. Rotate the Volume Control up or down to hear a sound test.
2. Rotate the Volume Control up or down and hold to display the volume bar.
• Rotate the Volume Control up or down to adjust the volume.
You can also adjust volume from the Volume preference screen. See page 52.
Routing Preferences
1. From the Main Menu, tap Preferences
2. From the Preferences screen, tap Routing
The first of three Routing screens will display. Press
to move through the Routing screens.
3. Complete one of the following:
If you want to...
Then...
change the Route Type
move the Route Type slider towards
Quickest to give more weighting to the
fastest time when calculating a route.
move the Route Type slider towards
Shortest distance to give more weighting
to the shortest distance when calculating
a route.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
If you want to...
Then...
change the Preference for freeways
move the Preference for freeways slider
towards Less often to use roads other
than freeways where possible when
calculating a route.
move the slider towards More often
to use freeways where possible when
calculating a route.
change the Preference for urban roads
move the Preference for urban roads
slider towards Less often to use roads
other than urban roads where possible
when calculating a route.
move the Preference for urban roads
slider towards More often to use urban
roads where possible when calculating
a route.
revert to default settings
select Set default on the first Routing
screen. This will restore the default
settings for Route Type Preference for
freeways and Preference for urban
roads
avoid toll roads
select the Avoid toll roads check box.
avoid unsealed roads
select the Avoid unsealed roads
check box.
avoid ferries
select the Avoid ferries check box.
receive a warning if your route includes toll
roads
select the Toll roads check box to display
a warning message at the start of your trip
if your route includes toll roads.
receive a warning if your route includes
unsealed roads
select the Unsealed roads check box to
display a warning message at the start of
your trip if your route includes unsealed
roads.
receive a warning if your route includes
ferries
select the Ferries check box to display a
warning message at the start of your trip if
your route includes ferries.
enable the Route Demonstrator
select the Demonstrate Route check
box. This allows you to plan and view a
route without a GPS fix. See page 35 for
more information.
enable the Route Demonstrator to play
repeatedly
select the Repeat check box.
select the SmartST Demonstration
check box. The demonstration willl
navigate between the first and second
Favorites after a 10-second delay.
enable Smart Demonstration to be played
43
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
If you want to...
Then...
enable Track Recording
(only to be used if required by Navman
Customer Support)
contact Navman Customer Support,
as we recommend this feature be used
only under the supervision of a Navman
technician.
4. Tap Save
The Main Menu screen will display.
Map Preferences — Display Settings
1. From the Main Menu, tap Preferences
2. From the Preferences screen, tap Maps
3. From the Maps screen, tap Display
The first of two Display screens will display. Press
to move through the Display screens.
4. Complete the following:
If you want to...
Then...
enable Auto Zoom during navigation
select the Auto Zoom check box. If
selected, the 2D Map and 3D Map
screen will automatically zoom in or out,
depending on your speed, to allow optimal
route-viewing.
select the Display Next Turn screen
check box.
enable access to the Next Turn screen
enable access to the Next 5 Turns screen
change the color scheme
select the Display Next 5 Turns screen
check box.
select your preferred scheme from the
Map color scheme box by tapping the left
or right arrows or using the left and right
sides of the 4-way toggle
improve screen contrast in light or dark
conditions
under Map colors, select either Day
or Night
If Night is selected, the Night Keypad
Lighting checkbox will be enabled.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
If you want to...
Then...
turn on the keypad backlight when the iCN select the Night Keypad Lighting
is using external power
check box.
Note: This option is only available when
Map colors is set to Night
display topographical information on the
select the Topographic display
2D Map and 3D Map screens
check box.
select the Display Map Grid check box.
display grid lines on the 2D Map and 3D
Map screens
display a north-pointing compass on the
select the Display Compass on Map
2D Map and 3D Map screens
check box.
display “no entry” icons on “no entry” roads select the Display no entry roads
on the 2D Map and 3D Map screens check box.
5. Tap Save
The Main Menu screen will display.
Map Preferences — Points of Interest (POIs)
Points of Interest in a region are grouped into types. This function allows you to select the types you
need. For example, you may be only interested in entertainment venues and want to disable other
POI types such as schools.
1. From the Main Menu, tap Preferences
2. From the Preferences screen, tap Maps
3. From the Maps screen, tap Points of Interest
The Points of Interest screen will display.
4. You may either choose to display (or hide) icons of all POI types on the 2D Map and 3D Map
screens, or to selectively display desired icons chosen from the list of POI types.
• To display all POI icons (i.e., icons of all POI types) on the 2D Map and 3D Map screens,
select Turn all on To hide all POI icons, select Turn all off
• To select a specific POI type icon for display, select the POI type check box. Repeat until all
desired POI types are selected.
• To view additional pages of POI types, scroll down using the 4-way toggle, or press
5. Tap Save
The Main Menu screen will display.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
The Active POI settings allow you to set warning chimes and visual warnings for custom POIs that
will activate within a chosen radius of your location. For example, a warning chime will sound or a
visual warning will display when an active POI is within 150 ft of, but not necessarily on, your route.
Note: Custom POIs must first be installed on your iCN using Smart Desktop before they can be
set as active POIs. See Points of Interest (POI) Editor on pages 61-63
1. From the Preferences menu, tap Safety Alerts
The Safety Alerts screen will display.
2. On the Safety Alerts screen, tap Active POI
The Select Active POI screen will display.
3. Select a custom POI type.
The POI Activation Settings screen will display.
4. Select the Active check box to activate the POI.
5. Modify the settings as required:
• To enable a warning chime when the POI is in close proximity, select the Audio Warning
check box.
• To enable a visual warning when the POI is in close proximity, select the Visual Warning
check box.
• Move the Distance to POI slider to select the distance at which the warnings will activate.
6. Tap Save
The Main Menu screen will display.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Alerts Preferences - Speed and GPS Signals
The Safety settings allow you to set safety-related warnings.
1. From the Preferences menu, tap Safety Alerts
The Safety Alerts screen will display.
2. On the Safety Alerts screen, tap Safety
The Safety screen will display.
3. Complete the following:
If you want to...
Then...
enable a warning chime
when traveling at or above a
designated speed
select the speed in the Speed box by tapping the left
or right arrows or using the left and right sides of the
4-way toggle. Tap Save
The Safety alerts screen will display.
Note: The GPS signal alert will be activated when a
Speed alert is selected.
enable a visual warning if the
Main Menu screen is accessed
in a moving vehicle
select the Warn driver when operating check box.
enable a warning chime and
visual warning when the GPS
signal has been lost
select the Warn when GPS lost check box.
Note: The GPS signal alert will be activated when a
Speed alert is selected.
4. Tap Save
The Main Menu screen will display.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
My Data Preferences - My Points of Interest
(My POI)
Custom Points of Interest (POIs) are installed from the Smart Desktop POI Editor (see pages
61-63), and listed on the My POIs screen.
1. From the Main Menu, tap Preferences
2. From the Preferences screen, tap My Data
3. From the My Data screen, tap My POI
The My POI screen will display.
4. To select a POI file, select the POI check box.
Note: there may be more than one page of POI types. To view additional pages of POI
types, scroll down using the 4-way toggle or press
.
5. Tap Save
The Main Menu screen will display.
My Data Preferences - Clear Data
1. From the Main Menu screen, tap Preferences
The Preferences screen will display.
2. From the Preferences screen, tap My Data
The My Data screen will display.
3. From the My Data screen, tap Clear Data
The Clear Data screen will display.
4. Complete the following:
If you want to...
Then...
clear recent destinations
select Clear Recent
When the warning dialog-box opens, tap Yes
clear favorites
select Clear Favorites
When the warning dialog-box opens, tap Yes
Note: This option will not clear My Home.
clear avoid areas
select Clear Avoid Areas
When the warning dialog-box opens, tap Yes
5 Press
to return to the Main Menu screen
48
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. The
Satellite Signal Strengths screen provides a visual representation of the information being received.
Latitude and longitude are displayed, along with a north-pointing compass, the heading in degrees
and ground speed. The strength of each satellite is displayed on a bar chart.
From the Main Menu screen, select Preferences More Preferences GPS status
The Satellite Signal Strengths screen will display.
You can also access this screen from the 2D Map and 3D Map screens by tapping the North-
oriented compass
The circle on the right side of the screen displays green when there is a valid fix (2D or 3D) and red
when no fix is available. A fix will be obtained more quickly if the vehicle is stationary than if it is moving.
The satellites available from your current position are shown as grey, red and green colored bars:
Bar Color
Grey
Description
No signal at all.
Red
A valid signal, but not being used to fix your position.
A valid signal being used to fix your position.
Green
49
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
1. From the Main Menu screen, tap Preferences
The Preferences screen will display.
2. From the Preferences screen, tap More Preferences
The second Preferences screen will display.
3. On the second Preferences screen, select Measurements
The Measurements screen will display.
4. Complete the following:
If you want to...
Then...
change the Position
select either the Decimal degrees or the Degrees,
format
minutes, seconds option.
change the local time
offset
select the offset from the Coordinated Universal Time (UTC)
for your location from the Local time offset box by tapping
the left or right arrows or using the left and right sides of the
4-way toggle
Next, select either the 12 Hour or 24 Hour option for time-
format.
choose distance units*
select either the kilometers or miles option.
5. Tap Save
The Main Menu screen will display.
* Only available when UK English or US English language is selected.
Language Preferences
1. From the Main Menu, tap Preferences
2. From the Preferences screen, tap More Preferences
The second Preferences screen will display.
3. On the second Preferences screen, tap Language
The Language screen will display.
4. To change your language, including the voice scheme used for voice guidance during
navigation, select your preferred voice scheme from the Language box by tapping the left or
right arrows or using the left and right sides of the 4-way toggle
5. To enable Voice guidance instructions during navigation, select the Enable check box.
6. Tap Save
The Main Menu screen will display.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
1. From the Main Menu screen, tap Preferences
The Preferences screen will display.
2. From the Preferences screen, tap More Preferences
The second Preferences screen will display.
3. On the second Preferences screen, tap Hardware
The Hardware screen will display
4. From the Hardware screen, tap Screen
The Screen screen will display.
5. Complete the following:
If you want to...
Then...
align the touch screen
tap Align and follow the prompts.
Note: The prompts are available in English only.
adjust screen brightness
move the Brightness slider towards High to increase
screen brightness.
move the Brightness slider towards Low to decrease
screen brightness.
6. Tap Save
The Main Menu screen will display.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
1. From the Main Menu screen, tap Preferences
The Preferences screen will display.
2. From the Preferences screen, tap More Preferences
The second Preferences screen will display.
3. On the second Preferences screen, tap Hardware
The Hardware screen will display.
4. From the Hardware screen, tap Volume
The Volume screen will display.
5. To increase volume, move the Volume Level slider towards High; to decrease volume,
move the Volume Level slider towards Low
• Tap Test to test the volume.
6. Tap Save
The Main Menu screen will display.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
1. From the Main Menu screen, tap Preferences
The Preferences screen will display.
2. From the Preferences screen, tap More Preferences
The second Preferences screen will display.
3. On the second Preferences screen, tap Hardware
The Hardware screen will display
4. From the Hardware screen, tap Power Status
The Power Status screen will display.
5 Press
to return to the Main Menu screen
Hardware Preferences - Power Options
1. From the Main Menu screen, tap Preferences
The Preferences screen will display.
2. From the Preferences screen, tap More Preferences
The second Preferences screen will display.
3. On the second Preferences screen, tap Hardware
The Hardware screen will display.
4. From the Hardware screen, tap Power Options
The Power Options screen will display.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
5. Complete the following:
If you want to...
Then...
i select the Go to Power Saving Mode if not used for
change the time to
elapse before entering
suspended state, when
connected to an external
power source
check box under External Power
ii select the time to elapse when connected to an external
power source before entering suspended state by tapping
the left or right arrows or using the left and right sides of
the 4-way toggle
change the time to
i
select the Go to Power Saving Mode if not used for
elapse before entering
suspended state, when
using battery power
check box under Internal Backup Battery
ii select the time to elapse when connected to a battery
before entering suspended state by tapping
the left or right arrows or using the left and right sides of
the 4-way toggle
6. Tap Save
The Main Menu screen will display.
Startup Preferences
1. From the Main Menu screen, tap Preferences
The Preferences screen will display.
2. From the Preferences screen, tap More Preferences
The second Preferences screen will display.
3. On the second Preferences screen, tap Startup
The Startup screen will display.
4. Complete the following:
If you want to...
Then...
select the Tutorial screen check box.
display the Tutorial on
startup
select the Language selection screen check box.
display the Language
screen on startup
view the Tutorial
select Show Tutorial. The first Tutorial screen will display.
Press
repeatedly to cycle through the Tutorial screens.
5. Tap Save
The Main Menu screen will display.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
13. Smart Desktop
Smart Desktop is used to install maps to your iCN, obtain software updates, manage Custom Points
of Interest (POIs) and install Basemaps.
Microsoft® ActiveSync®
Microsoft ActiveSync is used to establish a connection between your iCN and your computer.
ActiveSync 3.7.1 will be installed on your computer (if it is not already installed) as part of the
installation of Smart Desktop.
Installing Smart Desktop on your
Computer
Important Notes:
• Ensure that Internet Explorer 6 or higher is installed on your computer before you install
Smart Desktop, even if it is not your default browser.
• Windows® XP users, ensure that Windows XP Service Pack 1 has been applied before you
install Smart Desktop.
1. Close all open programs on your computer.
2. Insert the Smart Application Installer CD into your computer CD drive.
The Smart Desktop installer will start.
• If your computer does not automatically launch the CD, start the installation manually.
Start Run
Type D:\Setup SmartST 2005 Release 2 for iCN550.exe where “D” is the letter assigned
to your CD drive. Click OK
3. Follow the screen prompts to install Smart Desktop, including:
• Select your preferred language for Smart Desktop when prompted.
• Review and accept the Licence Agreement for Smart Desktop and Microsoft ActiveSync (if
not already installed on your computer) when prompted.
• Install Microsoft ActiveSync (if not already installed on your computer) when prompted.
• Select a destination folder for Smart Desktop when prompted.
4. When the installation has finished, click Finish
Smart Desktop will open.
Desktop and
iCN tabs
Selected maps
Map Display screen
Download selected
maps to the memory
card or memory
card reader (not
supplied)
Map information
Map Color Key
55
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
5. If prompted to connect your iCN to your computer, complete the following:
•
Plug the large end of the USB cable directly into a USB port on your computer (not a USB
hub); plug the small end into the USB Socket on the side of your iCN.
Tip: Where possible, plug the USB cable into a USB port at the back of your computer.
•
Plug the small end of the AC Power Pack cable into the Power Socket on the bottom of
your iCN; plug the other end into the mains.
•
•
Press
The iCN will turn on.
When the following screen displays on your iCN, click Next
• Microsoft ActiveSync will synchronise with your iCN.
You are now ready to install maps to your iCN.
To Open Smart Desktop
Once Smart Desktop has been installed, you can access it from the Start menu:
Start Programs Navman Smart Desktop 2005 Release 2 for iCN550
Uninstalling Smart Desktop from your
Computer
We recommend that you use the Add or Remove Programs feature in your Windows Control Panel:
1. Open Add or Remove Programs:
Start Control Panel Add or Remove Programs
2. Uninstall:
SmartST Desktop 2005 Release 2 for iCN550
Note: The name of the program may vary from the above.
Smart Desktop has now been uninstalled from your computer.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
14. Updating your iCN
Updating your Version of Smart
We recommended that you regularly use Smart Desktop to check the Navman website for
Smart software updates:
1. If you connect to the Internet via a dial-up connection, connect to the Internet now.
2. Open Smart Desktop:
Start Programs Navman Smart Desktop 2005 Release 2 for iCN550
3. On the Setup menu, select Update software, then Check for updates on the web
Your computer will connect to the Internet and display the Navman website.
4. If an update for your region is available, download it to your computer.
5. On the Setup menu, select Update software, then Update software on iCN
Follow the prompts to update your iCN software.
Upgrading from a Previous Version of
See the Upgrade Guide that came with your software upgrade.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
15. Installing Maps Using
Smart Desktop
Installing and Activating Maps on your iCN
1. Open Smart Desktop if it is not already open:
Start Programs Navman Smart Desktop Release 2 for iCN550
2 Insert a Smart Map CD into your computer CD drive, the available maps
will display (the default colour for available maps is cross-hatch blue).
Note: If your computer opens Windows Explorer, close the Windows Explorer window.
3. Click the map you want to install to your iCN.
Note: You may need to install multiple maps to cover the desired geographical area.
Maps available on the Map CD in your CD
drive are displayed in cross-hatch blue.
4 You will be prompted to enter or update your contact details so Navman can advise you
when updates are released.
• If you are activating a map from a continental region that was not previously installed on
your iCN, follow the prompts to activate the new region. The four continental regions are
Europe, North America, Australia and New Zealand.
• When activation has completed, the map will change colour (the default colour for
activated maps is light green).
The activated map is displayed in light green.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
5. Click the map to install to your iCN.
The map will change colour to indicate it has been selected (the default colour for selected
maps is dark green). The map is now listed in the Selected section of the Desktop Selected
Maps tab.
The selected map is displayed in dark green.
6. Click the Add to button to install all maps listed in the Selected section of the Desktop
Selected Maps tab to your iCN.
Smart Desktop will install the selected map or maps to your iCN or iCN memory card.
When they have been installed, the map or maps will change colour (the default colour for
installed maps is yellow).
7 To use your iCN, disconnect the USB cable from your iCN.
WARNING: Do not disconnect the USB cable from the iCN USB Socket until the Map Display screen
has refreshed and the installed map or maps have changed colour (the default colour for installed maps
is yellow).
Removing Maps from your iCN
1. Open Smart Desktop:
Start Programs Navman Smart Desktop 2005 for iCN550
2. Open the Maps on iCN section:
iCN tab Maps on iCN
3. Click the map to be removed and select Remove from iCN from the pop-up menu.
The map will be removed from your iCN.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
16. Smart Desktop Advanced
Features
This section details advanced features of Smart Desktop. If you have not installed Smart Desktop,
see pages 55-56.
To Find a City or Town
1. From the Map menu, click Find City
The Find City window will open.
2. Type the name of the city or town in the City Name field.
The list of available cities will reduce to match your search.
3. Double-click the name of the city or town.
The Map Display will rotate to center on the selected city or town and
will mark the city
or town location
Map Colors and Textures
To access the Desktop Colors section: Desktop tab Settings Colors
Adjust the settings to change the look of the map type.
Color Settings
Description
Controls map colors.
Displays the:
• map border color;
• map color;
• map border width.
Adjusts the map border width.
Controls the map display:
• solid color;
• no color;
• crosshatch texture.
Controls geographic features displayed on the map. Features are
only visible if the map has no color or crosshatch texture.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Map Layers
To conserve space on your iCN and memory card, you can choose map layers to install.
The layers you can choose from are:
• Points of Interest (POIs)
• Bodies of water and parks
• Land contours (topography).
To access the Map Layers section: Desktop tab Settings Layers
Select or clear each checkbox to indicate the layers to install for each map.
Points of Interest (POI) Editor
You can create custom Points of Interest (POIs) using the POI Editor in two ways:
• by creating your own POI files, or
• by using compatible POI files downloaded from the Internet.
A maximum of 25 Custom POI files can be saved on your iCN. The Custom POI files are listed on
the My POI screen.
Custom POIs can be set to enable a warning chime or visual warning when in close proximity at the
Select Active POI screen.
Creating a Custom POI File
1. Create a new POI File using the POI Editor.
• On the Smart Desktop Map menu, click Points of Interest
The POI Editor window will open.
• On the POI Editor window File menu, click New Text File
The POI File Name window will open.
• Type a name for the file in the File Name box, then click OK. The file name can be up
to eight characters with no spaces.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
2. Add a POI to the POI File.
• On the POI Editor window Edit menu, click New
The POI Details window will open.
• Type a description for the POI in the Description box.
• On the Degrees, Minutes, Seconds tab, type or select the degree, minute and
second of the POI latitude in the Latitude boxes.
• On the Degrees, Minutes, Seconds tab, type or select the degree, minute and
second of the POI longitude in the Longitude boxes.
• To save the POI, click OK
3. Repeat step 2 until all POIs have been added to the POI file.
4. On the File menu, click Save
The POI file is saved.
5. Complete Saving a Custom POI File to your iCN below.
Importing a Custom POI File
1. Download a POI file from the Internet and save it on your computer.
2. Open the POI file using the POI Editor.
• On the Smart Desktop Map menu, click Points of Interest
The POI Editor window will open.
• On the POI Editor window File menu, click Open Text File
The Open dialogue box will open.
• Select the POI file from your local or network drive, then click Open
3. Complete Saving a Custom POI File to your iCN below.
Saving a Custom POI File to your iCN
1. On the Smart Desktop Map menu, click Points of Interest
The POI Editor window will open.
2. On the POI Editor window File menu, click Save to Device
The POI Options window will open.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
3. Modify the POI settings as required:
If you want to...
Then...
activate the POI
select the Active check box.
Note: If you do not activate the POI, you will be
able to configure only the POI Visibility Level
and Icon File settings.
enable a visual warning when the
POI is in close proximity
select the Visual Alert check box.
select the Audio Alert check box.
select the Metric or Imperial option.
select the distance from the Distance box.
enable a warning chime when the
POI is in close proximity
change the units used to measure
distance for this POI
select the distance from the POI
at which the visual warning should
display or the warning chime
should sound
indicate the priority of this POI
when one or more additional POIs
are in the same locale
move the POI Visibility Level slider left or right.
select a custom POI type icon to
display on the map (if you do not
Type the path to the icon file to be used to
represent the POI type in the Icon File box or
select a custom icon, a default icon select the icon file from your local or network
will display)
drive by clicking
, locating the file and
clicking Open. The file must be a bitmap (.bmp)
graphic with a minimum of 6x6 pixels and a
maximum of 32x32 pixels.
4. Click OK and follow the prompts.
The POI file is saved to the iCN as a Custom POI type.
• If you want to change the file name, edit the file name in the POI File Name window
File Name box, then click OK
The file name can be up to eight characters and cannot contain spaces.
Deleting a Custom POI File from your iCN
1. On the Map menu, click Points of Interest
The POI Editor window will open.
2. On the File menu, click Manage POI Files
The Manage POI Files window will open, displaying a list of custom POI files installed on
your iCN.
3. Click the File Name or Size of the POI file to delete.
4. Click Delete
The file is removed from the list, but is not yet deleted.
5. To select another file to delete, go back to step 2; otherwise, proceed to step 6.
6. Click OK and accept the changes.
The selected file or files are deleted.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Backups
You can save backups of all iCN Preferences and Favorites to your computer.
To Back up your Preferences, Favorites and My Home
1. On the Smart Desktop File menu, click Backup
The Backup window will display.
2. Click New Backup
The New Backup window will display.
3. Click OK
The New Backup window will close. The backup will be listed on the Backup window.
4. Close the Backup window.
To Delete a Backup
1. On the Smart Desktop File menu, click Backup
The Backup window will display.
2. Select from the list the backup to delete.
3. Click Delete, then click OK
The backup is deleted.
4. Close the Backup window.
To Restore a Backup
1. On the Smart Desktop File menu, click Restore
The Restore window will display.
2. Select the backup from the list, then click Restore.
The Restore File Selection window will display.
3. Select or clear the check boxes to indicate which part of the backup to restore.
4. Click OK
The Restore File Selection window will close and the backup will be restored.
5. Close the Restore window.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
17. Accessories
You can purchase separately almost all items that came with your iCN, including additional mounting kits
and in-vehicle power adaptors. Visit your retailer or your regional Navman website for more information.
See page 74 for web addresses
The following accessories are also available for your iCN:
Required for vehicles with heated or heat-reflective windshields or to boost GPS performance in
weak signal areas and in areas with poor or limited visibility of the open sky.
AC Power Adaptor Kit
AC power cable with adaptor plugs for the following regions:
• Western Europe
• United Kingdom
• United States/Canada.
Earphones
Earphones for listening to voice instructions in privacy.
Button functions are the same as the iCN control buttons except that the
iCN cannot be turned on using the Remote Control.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Appendix: Street Types
Country
Street Type
Abbreviation
Canada
ABBEY
ACRES
ALLEE
ALLEY
AUTOROUTE
AVENUE (English)
AVENUE (French)
ABBEY
ACRES
ALLEE
ALLEY
AUT
AVE
AV
BAY
BAT
BEACH
BEND
BOULEVARD (English)
BOULEVARD (French)
BY-PASS
BEACH
BEND
BLVD
BOUL
BYPASS
BYWAY
BYWAY
CAMPUS
CAPE
CARRÉ
CAMPUS
CAPE
CAR
CARREFOUR
CENTER (English)
CENTER (French)
CERCLE
CHASE
CHEMIN
CARREF
CTR
C
CERCLE
CHASE
CH
CIRCLE
CIR
CIRCUIT
CLOSE
COMMON
CONCESSION
CORNERS
COTE
CIRCT
CLOSE
COMMON
CONC
CRNRS
COTE
COUR
CRT
COUR
COURT
COVE
COVE
CRES
CROIS
CROSS
CDS
CRESCENT
CROISSANT
CROSSING
CUL-DE-SAC
DALE
DELL
DIVERSION
DRIVE
DALE
DELL
DIVERS
DR
ÉCHANGEUR
END
ECH
END
ESPLANADE
ESTATES
ESPL
ESTATE
66
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Abbreviation
Country
Street Type
Canada (continued)
EXPRESSWAY
EXTENSION
EXPY
EXTEN
FARM
FIELD
FARM
FIELD
FOREST
FREEWAY
FRONT
FOREST
FWY
FRONT
GARDENS
GATE
GDNS
GATE
GLADE
GLEN
GLADE
GLEN
GREEN
GROUNDS
GROVE
GREEN
GRNDS
GROVE
HARBOUR
HEIGHTS
HIGHLANDS
HIGHWAY
HILL
HARBR
HTS
HGHLDS
HWY
HILL
HOLLOW
HOLLOW
ÎLE
iLE
IMPASSE
ISLAND
IMP
ISLAND
KEY
KEY
KNOLL
KNOLL
LANDING
LANE
LANDNG
LN
LIMITS
LINE
LMTS
LINE
LINK
LINK
LOOKOUT
LOOP
LKOUT
LOOP
MALL
MALL
MANOR
MAZE
MANOR
MAZE
MEADOW
MEWS
MONTEE
MOOR
MOUNT
MOUNTAIN
MEADOW
MEWS
MONTEE
MOOR
MOUNT
MTN
ORCHARD
ORCH
PARADE
PARC
PARADE
PARC
67
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Country
Street Type
Abbreviation
Canada (continued)
PARK
PK
PARKWAY
PASSAGE
PATH
PATHWAY
PINES
PLACE (English)
PLACE (French)
PLATEAU
PLAZA
PKY
PASS
PATH
PTWAY
PINES
PL
PLACE
PLAT
PLAZA
PT
POINT
PORT
PRIVATE
PROMENADE
PORT
PVT
PROM
QUAY
QUAY
RANG
RANGE
RIDGE
RISE
ROAD
ROND POINT
ROUTE
ROW
RANG
RG
RIDGE
RISE
RD
RDPT
RTE
ROW
RUE
RLE
RUE
RUELLE
RUN
RUN
SENTIER
SQUARE
SENT
SQ
STREET
SUBDIVISION
ST - ‘
SUBDIV
TERRACE
TERASSE
THICKET
TOWERS
TOWNLINE
TRAIL
TERR
TSSE
THICK
TOWERS
TLINE
TRAIL
TURNABOUT
TRNABT
VALE
VIA
VALE
VIA
VIEW
VILLAGE
VISTA
VOIE
VIEW
VILLGE
VISTA
VOIE
WALK
WAY
WALK
WAY
WHARF
WOOD
WYND
WHARF
WOOD
WYND
68
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Abbreviation
Country
Street Type
United States of America
ALLEY
ALY
ANNEX
ARCADE
AVENUE
ANX
ARC
AVE
BAYOO
BEACH
BEND
BYU
BCH
BND
BLF
BLUFF
BLUFFS
BOTTOM
BOULEVARD
BRANCH
BRIDGE
BROOK
BROOKS
BURG
BLFS
BTM
BLVD
BR
BRG
BRK
BRKS
BG
BURGS
BYPASS
BGS
BYP
CAMP
CP
CANYON
CAPE
CAUSEWAY
CENTER
CENTERS
CIRCLE
CYN
CPE
CSWY
CTR
CTRS
CIR
CIRCLES
CLIFF
CIRS
CLF
CLIFFS
CLUB
CLFS
CLB
COMMON
CORNER
CORNERS
COURSE
COURT
CMN
COR
CORS
CRSE
CT
COURTS
COVE
CTS
CV
COVES
CREEK
CVS
CRK
CRES
CRST
XING
XRD
CURV
CRESCENT
CREST
CROSSING
CROSSROAD
CURVE
DALE
DL
DAM
DM
DV
DR
DRS
DIVIDE
DRIVE
DRIVES
69
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Country
Street Type
Abbreviation
United States of America
(continued)
ESTATE
ESTATES
EXPRESSWAY
EXTENSION
EXTENSIONS
EST
ESTS
EXPY
EXT
EXTS
FALLS
FLS
FERRY
FIELD
FRY
FLD
FIELDS
FLATS
FORD
FORDS
FOREST
FORGE
FORGES
FORK
FLDS
FLTS
FRD
FRDS
FRST
FRG
FRGS
FRK
FORKS
FORT
FRKS
FT
FREEWAY
FWY
GARDEN
GARDENS
GATEWAY
GLEN
GDN
GDNS
GTWY
GLN
GLENS
GREEN
GLNS
GRN
GREENS
GROVE
GRNS
GRV
GROVES
GRVS
HARBOR
HARBORS
HAVEN
HEIGHTS
HIGHWAY
HILL
HBR
HBRS
HVN
HTS
HWY
HL
HILLS
HLS
HOLLOW
HOUSE
HOLW
HSE
INLET
INLT
IS
ISS
ISLE
ISLAND
ISLANDS
ISLE
JUNCTION
JCT
JUNCTIONS
JCTS
KEY
KY
KEYS
KNOLL
KNOLLS
KYS
KNL
KNLS
70
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Abbreviation
Country
Street Type
United States of America
(continued)
LAKE
LK
LAKES
LANDING
LANE
LKS
LNDG
LN
LIGHT
LIGHTS
LOAF
LGT
LGTS
LF
LOCK
LCK
LCKS
LDG
LOOP
LOCKS
LODGE
LOOP
MANOR
MNR
MNRS
MKT
MDW
MDWS
ML
MANORS
MARKET
MEADOW
MEADOWS
MILL
MILLS
MLS
MISSION
Freeway
MOUNT
MSN
MTWY
MT
MOUNTAIN
MOUNTAINS
MTN
MTNS
NECK
NCK
ORCHARD
OVAL
OVERPASS
ORCH
OVAL
OPAS
PARK
PARK
PARK
PKWY
PKWY
PASS
PSGE
PATH
PIKE
PNE
PARKS
PARKWAY
PARKWAYS
PASS
PASSAGE
PATH
PIKE
PINE
PINES
PLACE
PLAIN
PNES
PL
PLN
PLAINS
PLAZA
POINT
POINTS
PORT
PLNS
PLZ
PT
PTS
PRT
PORTS
PRAIRIE
PRTS
PR
RADIAL
RAMP
RADL
RAMP
71
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Country
Street Type
Abbreviation
United States of America
(continued)
RANCH
RAPID
RAPIDS
REST
RNCH
RPD
RPDS
RST
RIDGE
RIDGES
RIVER
ROAD
ROADS
ROUTE
ROW
RDG
RDGS
RIV
RD
RDS
RTE
ROW
RUE
RUN
RUE
RUN
SHOAL
SHL
SHOALS
SHORE
SHLS
SHR
SHRS
SKWY
SPG
SPGS
SPUR
SPUR
SQ
SQS
STA
STRA
STRM
ST
SHORES
SKYWAY
SPRING
SPRINGS
SPUR
SPURS
SQUARE
SQUARES
STATION
STRAVENUE
STREAM
STREET
STREETS
SUMMIT
STS
SMT
TERRACE
THROUGHWAY
TRACE
TRACK
TRAFFICWAY
TRAIL
TER
TRWY
TRCE
TRAK
TRFY
TRL
TUNNEL
TURNPIKE
TUNL
TPKE
UNDERPASS
UNION
UPAS
UN
UNIONS
UNS
VALLEY
VALLEYS
VIADUCT
VIEW
VLY
VLYS
VIA
VW
VIEWS
VILLAGE
VILLAGES
VWS
VLG
VLGS
72
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Abbreviation
Country
Street Type
United States of America
(continued)
VILLE
VISTA
VL
VIS
WALK
WALKS
WALL
WAY
WALK
WALK
WALL
WAY
WAYS
WELL
WELLS
WAYS
WL
WLS
73
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Support Information
Support for
Australia:
Support for
Europe:
Navman Australia Pty. Ltd
PO Box 479
Navman Europe Limited
4G Gatwick House
Peeks Brook Lane
Gladesville, NSW 2111
Australia
Horley, Surrey RH6 9ST
United Kingdom
Support: support.navman.com
Support: support.navman.com
Support for
Support for
New Zealand:
US and Canada:
Navman NZ Ltd
PO Box. 68-155
Newton
Navman USA, Inc.
5275 Capital Boulevard
Raleigh, NC 27616-2925
United States of America
Auckland
New Zealand
Phone: 866-9-NAVMAN
Support: support.navman.com
Support: support.navman.com
NAVMAN DISCLAIM ALL LIABILITY FOR ANY USE OF THIS PRODUCT
IN A WAY THAT MAY CAUSE ACCIDENTS, DAMAGE OR VIOLATE THE LAW.
Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Copyright
© 2005 Navman NZ Limited. Navman is a registered trademark of Navman NZ Limited. All rights reserved.
Smart, Drive-Away and Back-On-Track are trademarks of Navman NZ Limited. All rights reserved.
Microsoft Windows 98 SE, ME, 2000 or XP SP1, Microsoft ActiveSync and Internet Explorer are registered
trademarks of Microsoft Corporation. All rights reserved.
Adobe Reader is a registered trademark of Adobe Systems Incorporated. All rights reserved.
All other trademarks and registrations are the property of their respective owners.
Published in New Zealand.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Notes
75
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Notes
76
Download from Www.Somanuals.com. All Manuals Search And Download.
iCN 550 User Manual
Notes
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|