European Union Statement of Compliance
Hereby, NETGEAR, Inc. declares that this modem router is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Èesky
[Czech]
NETGEAR, Inc. tímto prohlašuje, že tento Integrated ADSL Modem and Wireless
Router with Voice, Model DG834GV je ve shodì se základními požadavky a dalšími
pøíslušnými ustanoveními smìrnice 1999/5/ES.
Dansk
[Danish]
Undertegnede NETGEAR, Inc. erklærer herved, at følgende udstyr Integrated ADSL
Modem and Wireless Router with Voice, Model DG834GV overholder de væsentlige
krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt NETGEAR, Inc., dass sich das Gerät Integrated ADSL Modem and
Wireless Router with Voice, Model DG834GV in Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab NETGEAR, Inc. seadme Integrated ADSL Modem and Wireless
Router with Voice, Model DG834GV vastavust direktiivi 1999/5/EÜ põhinõuetele ja
nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, NETGEAR, Inc., declares that this Integrated ADSL Modem and Wireless
Router with Voice, Model DG834GV is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente NETGEAR, Inc. declara que el Integrated ADSL Modem and
Wireless Router with Voice, Model DG834GV cumple con los requisitos esenciales y
cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ NETGEAR, Inc. ΔΗΛΩΝΕΙ ΟΤΙ Integrated ADSL Modem and
Wireless Router with Voice, Model DG834GV ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/
5/ΕΚ.
Français
[French]
Par la présente NETGEAR, Inc. déclare que l'appareil Integrated ADSL Modem and
Wireless Router with Voice, Model DG834GV est conforme aux exigences essentielles
et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano
[Italian]
Con la presente NETGEAR, Inc. dichiara che questo Integrated ADSL Modem and
Wireless Router with Voice, Model DG834GV è conforme ai requisiti essenziali ed alle
altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo NETGEAR, Inc. deklarç, ka Integrated ADSL Modem and Wireless Router with
Voice, Model DG834GV atbilst Direktîvas 1999/5/EK bûtiskajâm prasîbâm un citiem ar to
saistîtajiem noteikumiem.
iii
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Lietuviø
[Lithuanian]
Šiuo NETGEAR, Inc. deklaruoja, kad šis Integrated ADSL Modem and Wireless Router
with Voice, Model DG834GV atitinka esminius reikalavimus ir kitas 1999/5/EB
Direktyvos nuostatas.
Nederlands
[Dutch]
Hierbij verklaart NETGEAR, Inc. dat het toestel Integrated ADSL Modem and Wireless
Router with Voice, Model DG834GV in overeenstemming is met de essentiële eisen en
de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti
[Maltese]
Hawnhekk, NETGEAR, Inc., jiddikjara li dan Integrated ADSL Modem and Wireless
Router with Voice, Model DG834GV jikkonforma mal-tiijiet essenzjali u ma
provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar
[Hungarian]
Alulírott, NETGEAR, Inc. nyilatkozom, hogy a Integrated ADSL Modem and Wireless
Router with Voice, Model DG834GV megfelel a vonatkozó alapvetõ követelményeknek
és az 1999/5/EC irányelv egyéb elõírásainak.
Polski
[Polish]
Niniejszym NETGEAR, Inc. oœwiadcza, ¿e Integrated ADSL Modem and Wireless
Router with Voice, Model DG834GV jest zgodny z zasadniczymi wymogami oraz
pozosta³ymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português
[Portuguese]
NETGEAR, Inc. declara que este Integrated ADSL Modem and Wireless Router with
Voice, Model DG834GV está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
NETGEAR, Inc. izjavlja, da je ta Integrated ADSL Modem and Wireless Router with
Voice, Model DG834GV v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloèili
direktive 1999/5/ES.
Slovensky
[Slovak]
NETGEAR, Inc. týmto vyhlasuje, že Integrated ADSL Modem and Wireless Router with
Voice, Model DG834GV spåòa základné požiadavky a všetky príslušné ustanovenia
Smernice 1999/5/ES.
Suomi
[Finnish]
NETGEAR, Inc. vakuuttaa täten että Integrated ADSL Modem and Wireless Router with
Voice, Model DG834GV tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten
ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar NETGEAR, Inc. att denna [utrustningstyp] står I överensstämmelse med
de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.
A printed copy of the EU Declaration of Conformity certificate for this product is provided in the DG834GV
product package.
Bestätigung des Herstellers/Importeurs
Es wird hiermit bestätigt, daß das Integrated ADSL Modem and Wireless Router with Voice, Model DG834GV gemäß
der im BMPT-AmtsblVfg 243/1991 und Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das vorschriftsmäßige
Betreiben einiger Geräte (z.B. Testsender) kann jedoch gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die
Anmerkungen in der Betriebsanleitung.
iv
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt
gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.
Certificate of the Manufacturer/Importer
It is hereby certified that the Integrated ADSL Modem and Wireless Router with Voice, Model DG834GV has been
suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation
of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to
certain restrictions. Please refer to the notes in the operating instructions.
Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and has been granted the right to test the series for compliance with the regulations.
Voluntary Control Council for Interference (VCCI) Statement
This equipment is in the second category (information equipment to be used in a residential area or an adjacent area
thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing
Equipment and Electronic Office Machines aimed at preventing radio interference in such residential areas.
When used near a radio or TV receiver, it may become the cause of radio interference.
Read instructions for correct handling.
Customer Support
Refer to the Support Information Card that shipped with your Integrated ADSL Modem and Wireless Router with Voice,
Model DG834GV.
World Wide Web
NETGEAR maintains a World Wide Web home page that you can access at the universal resource locator (URL)
http://www.netgear.com. A direct connection to the Internet and a Web browser such as Internet Explorer or
Netscape are required.
v
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Product and Publication Details
Model Number:
Publication Date:
Product Family:
Product Name:
DG834GV
September 2006
Modem Router
Integrated ADSL Modem and Wireless Router with Voice, Model
DG834GV
Home or Business Product:
Language:
Home
English
Publication Part Number:
202-10169-01
Publication Version Number: 1.0
vi
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Reference Manual for the Integrated ADSL Modem and Wireless Router with
Voice, Model DG834GV
Chapter 1
About This Manual
Audience, Scope, Conventions, and Formats ................................................................1-1
Chapter 2
Introduction
About the Modem Router ...............................................................................................2-1
Key Features ..................................................................................................................2-2
802.11 Standards-based Wireless Networking ........................................................2-3
Protocol Support ......................................................................................................2-4
The Router’s Rear Panel .........................................................................................2-9
Connecting the Router to the Internet ..........................................................................2-10
Chapter 3
Wireless Configuration
Considerations for a Wireless Network ..........................................................................3-1
Implement Appropriate Wireless Security ...............................................................3-2
Understanding Wireless Settings ...................................................................................3-3
How to Set Up and Test Basic Wireless Connectivity ..............................................3-6
1
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Restrict Wireless Access to Your Network ...................................................3-7
How to Configure WEP ..........................................................................................3-10
How to Configure WPA-802.1x ..............................................................................3-12
Chapter 4
VoIP and Telephone Settings
Configuring Advanced Security ......................................................................................4-1
Viewing the Call Log ................................................................................................4-5
Chapter 5
Protecting Your Network
Protecting Access to Your Integrated ADSL Modem and Wireless Router with Voice, Model
DG834GV .......................................................................................................................5-1
How to Change the Built-In Password .....................................................................5-1
Configuring Basic Firewall Services ...............................................................................5-3
How to Block Keywords and Sites ...........................................................................5-3
Outbound Rules (Service Blocking) .........................................................................5-9
Order of Precedence for Rules ..............................................................................5-11
How to Set Your Time Zone ...................................................................................5-13
Chapter 6
Managing Your Network
Backing Up, Restoring, or Erasing Your Settings ...........................................................6-1
How to Back Up the Configuration to a File .............................................................6-1
How to Erase the Configuration ...............................................................................6-2
2
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Upgrade the Modem Router Firmware ........................................................6-3
Network Management Information .................................................................................6-5
Viewing, Selecting, and Saving Logged Information ..............................................6-10
Enabling Security Event E-mail Notification .................................................................6-14
Configuring Remote Management .........................................................................6-17
Chapter 7
Advanced Configuration
Configuring Advanced Security ......................................................................................7-1
Setting Up A Default DMZ Server ............................................................................7-2
Connect Automatically, as Required ........................................................................7-3
Disable Port Scan and DOS Protection ...................................................................7-3
Respond to Ping on Internet WAN Port ...................................................................7-4
MTU Size .................................................................................................................7-4
Configuring Dynamic DNS .....................................................................................7-10
Using Static Routes ......................................................................................................7-12
How to Configure Static Routes .............................................................................7-13
Chapter 8
Troubleshooting
Basic Functioning ...........................................................................................................8-1
Test LED Never Turns On or Test LED Stays On .....................................................8-2
Troubleshooting the Web Configuration Interface ..........................................................8-3
3
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
ADSL link .................................................................................................................8-4
Troubleshooting Internet Browsing ..........................................................................8-7
Testing the LAN Path to Your Router .......................................................................8-7
Appendix A
Technical Specifications
Appendix B
Related Documents
4
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
About This Manual
This chapter describes the intended audience, scope, conventions, and formats of this manual.
Audience, Scope, Conventions, and Formats
This reference manual assumes that the reader has basic to intermediate computer and Internet
skills. However, basic computer network, Internet, firewall, and VPN technologies tutorial
information is provided in the Appendices and on the Netgear website.
Note: Product updates are available on the NETGEAR, Inc. Web site at
http://kbserver.netgear.com/products/DG834GV.asp.
This guide uses the following typographical conventions:
Table 1-1.
italics
bold
Emphasis, books, CDs, URL names
User input
fixed
Screen text, file and server names, extensions, commands, IP addresses
This guide uses the following formats to highlight special messages:
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
About This Manual
1-1
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.
Danger: This is a safety warning. Failure to take heed of this notice may result in
personal injury or death.
This manual is written for the Integrated ADSL Modem Wireless Router with Voice according to
these specifications:
Table 1-2. Manual Scope
Product Version
Integrated ADSL Modem and Wireless Router with Voice, Model
DG834GV
Manual Publication Date
September 2006
How to Print this Manual
To print this manual you can choose one of the following several options, according to your needs.
•
•
Printing a Page in the HTML View.
Each page in the HTML version of the manual is dedicated to a major topic. Use the Print
button on the browser toolbar to print the page contents.
Printing a Chapter.
Use the PDF of This Chapter link at the top left of any page.
— Click the PDF of This Chapter link at the top right of any page in the chapter you want to
print. The PDF version of the chapter you were viewing opens in a browser window.
— Your computer must have the free Adobe Acrobat reader installed in order to view and
print PDF files. The Acrobat reader is available on the Adobe Web site at
1-2
About This Manual
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
— Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
•
Printing the Full Manual.
Use the Complete PDF Manual link at the top left of any page.
— Click the Complete PDF Manual link at the top left of any page in the manual. The PDF
version of the complete manual opens in a browser window.
— Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
About This Manual
1-3
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
1-4
About This Manual
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Introduction
This chapter describes the features of the NETGEAR Integrated ADSL Modem and Wireless
Router with Voice, Model DG834GV. The Integrated ADSL Modem Wireless Router with Voice
is a combination of a built-in ADSL modem, modem router, 4-port switch, and firewall which
enables your entire network to safely share an Internet connection that otherwise would be used by
a single computer.
and TCP/IP Addressing” in Appendix B to become more familiar with the terms
and procedures used in this manual.
About the Modem Router
The Integrated ADSL Modem and Wireless Router with Voice, Model DG834GV provides
continuous, high-speed 10/100 Ethernet access between your Ethernet devices. With minimum
setup, you can install and use the modem router within minutes.
The Integrated ADSL Modem Wireless Router with Voice provides multiple Web content filtering
options, reporting, and instant alerts. Parents and network administrators can establish restricted
access policies based on time of day, Web site addresses, and address keywords. They can also
share high-speed ADSL Internet access for up to 253 personal computers. The included firewall
and Network Address Translation (NAT) features protect you from hackers.
Introduction
2-1
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Key Features
The Integrated ADSL Modem Wireless Router with Voice provides the following features:
•
•
•
•
•
•
•
•
•
A built-in ADSL modem
A powerful, true firewall
802.11g standards-based wireless networking
Easy, Web-based setup for installation and management
Extensive Internet protocol support
Trustworthy VPN Communications over the Internet
VPN Wizard for easy VPN configuration
Auto Sensing and Auto Uplink™ LAN Ethernet connections
Content filtering
These features are discussed below.
A Powerful, True Firewall
Unlike simple Internet sharing NAT routers, the DG834GV is a true firewall, using stateful packet
inspection to defend against hacker attacks. Its firewall features include:
•
Denial of Service (DoS) protection
Automatically detects and thwarts Denial of Service (DoS) attacks such as Ping of Death,
SYN Flood, LAND Attack and IP Spoofing.
•
•
•
Blocks unwanted traffic from the Internet to your LAN.
Blocks access from your LAN to Internet locations or services that you specify as off-limits.
Logs security incidents
The DG834GV will log security events such as blocked incoming traffic, port scans, attacks,
and administrator logins. You can configure the modem router to email the log to you at
specified intervals. You can also configure the modem router to send immediate alert
messages to your email address or email pager whenever a significant event occurs.
2-2
Introduction
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
802.11 Standards-based Wireless Networking
The Integrated ADSL Modem Wireless Router with Voice includes an 802.11g-compliant
wireless access point, providing continuous, high-speed 10/100 Mbps access between your
wireless and Ethernet devices. The access point provides:
•
•
•
•
•
802.11g Standards-based wireless networking at up to 54 Mbps
Works with both 802.11g and 802.11b wireless devices
64-bit and 128-bit WEP encryption security
WEP keys can be entered manually or generated by passphrase
Support for Wi-Fi Protected Access Pre-Shared Key (WPA-PSK) encryption and 802.1x
authentication
•
Wireless access can be restricted by MAC address
Easy Installation and Management
You can install, configure, and operate the DG834GV within minutes after connecting it to the
network. The following features simplify installation and management tasks:
•
Browser-based management
Browser-based configuration allows you to easily configure your modem router from almost
any type of personal computer, such as Windows, Macintosh, or Linux. A user-friendly Setup
Wizard is provided and online help documentation is built into the browser-based Web
Management Interface.
•
•
Smart Wizard
The firmware in the modem router automatically senses the type of Internet connection, asking
you only for the information required for your type of ISP account.
Remote management
The modem router allows you to log in to the Web management interface from a remote
location via the Internet. For security, you can limit remote management access to a specified
remote IP address or range of addresses, or you can choose a nonstandard port number.
•
Diagnostic functions
The modem router incorporates built-in diagnostic functions such as Ping, DNS lookup, and
remote reboot. These functions allow you to test Internet connectivity and reboot the modem
router. You can use these diagnostic functions directly from the DG834GV when you are
connected on the LAN or when you are connected over the Internet via the remote
management function.
Introduction
2-3
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
•
•
Visual monitoring
The modem router’s front panel LEDs provide an easy way to monitor its status and activity.
Flash erasable programmable read-only memory (EPROM) for firmware upgrades.
Protocol Support
The DG834GV supports Transmission Control Protocol/Internet Protocol (TCP/IP) and Routing
Information Protocol (RIP). “Internet Networking and TCP/IP Addressing” in Appendix B
provides further information on TCP/IP.
•
The Ability to Enable or Disable IP Address Sharing by NAT
The DG834GV allows several networked PCs to share an Internet account using only a single
IP address, which may be statically or dynamically assigned by your Internet service provider
(ISP). This technique, known as Network Address Translation (NAT), allows the use of an
inexpensive single-user ISP account. This feature can also be turned off completely while
using the DG834GV if you want to manage the IP address scheme yourself.
•
•
Automatic Configuration of Attached PCs by DHCP
The DG834GV dynamically assigns network configuration information, including IP, modem
router, and domain name server (DNS) addresses, to attached PCs on the LAN using the
Dynamic Host Configuration Protocol (DHCP). This feature greatly simplifies configuration
of PCs on your local network.
DNS Proxy
When DHCP is enabled and no DNS addresses are specified, the modem router provides its
own address as a DNS server to the attached PCs. The modem router obtains actual DNS
addresses from the ISP during connection setup and forwards DNS requests from the LAN.
•
•
Classical IP (RFC 1577)
Some Internet service providers, in Europe for example, use Classical IP in their ADSL
services. In such cases, the modem router is able to use the Classical IP address from the ISP.
PPP over Ethernet (PPPoE)
PPP over Ethernet is a protocol for connecting remote hosts to the Internet over an ADSL
connection by simulating a dial-up connection. This feature eliminates the need to run a login
program such as EnterNet or WinPOET on your computer.
•
PPP over ATM (PPPoA)
PPP over ATM is a protocol for connecting remote hosts to the Internet over an ADSL
connection by simulating an ATM connection.
2-4
Introduction
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
•
•
Dynamic DNS
Dynamic DNS services allow remote users to find your network using a domain name when
your IP address is not permanently assigned. The modem router contains a client that can
connect to many popular Dynamic DNS services to register your dynamic IP address.
Universal Plug and Play (UPnP)
UPnP is a networking architecture that provides compatibility between networking
technologies. UPnP compliant routers provide broadband users at home and small businesses
with a seamless way to participate in online games, videoconferencing and other peer-to-peer
services.
Virtual Private Networking (VPN)
The Integrated ADSL Modem Wireless Router with Voice provides a secure encrypted connection
between your local area network (LAN) and remote networks or clients. It includes the following
VPN features:
•
•
Supports 5 VPN connections.
Supports industry standard VPN protocols
The Integrated ADSL Modem Wireless Router with Voice supports standard Manual or IKE
keying methods, standard MD5 and SHA-1 authentication methods, and standard DES and
3DES encryption methods. It is compatible with many other VPN products.
•
•
Supports 3DES encryption for maximum security.
VPN Wizard based on VPNC recommended settings.
Auto Sensing and Auto Uplink™ LAN Ethernet Connections
With its internal 4-port 10/100 switch, the DG834GV can connect to either a 10 Mbps standard
Ethernet network or a 100 Mbps Fast Ethernet network. The local LAN ports are autosensing and
capable of full-duplex or half-duplex operation.
The modem router incorporates Auto UplinkTM technology. Each local Ethernet port will
automatically sense whether the Ethernet cable plugged into the port should have a ‘normal’
connection such as to a computer or an ‘uplink’ connection such as to a switch or hub. That port
will then configure itself to the correct configuration. This feature also eliminates the need to
worry about crossover cables, as Auto Uplink will accommodate either type of cable to make the
right connection.
Introduction
2-5
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Content Filtering
With its content filtering feature, the DG834GV prevents objectionable content from reaching
your PCs. The modem router allows you to control access to Internet content by screening for
keywords within Web addresses. You can configure the modem router to log and report attempts
to access objectionable Internet sites.
2-6
Introduction
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
What’s in the Box?
The product package should contain the following items:
•
•
•
•
•
•
•
Integrated ADSL Modem and Wireless Router with Voice, Model DG834GV
AC power adapter (varies by region)
Category 5 (Cat 5) Ethernet cable
Telephone cable with RJ-11 connector
Microfilters (quantity and type vary by region)
DG834GV Integrated ADSL Modem and Wireless Router Resource CD, including this guide
Two plastic feet that can be used to stand the Integrated ADSL Modem Wireless Router with
Voice on end
•
Warranty and Support Information cards
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.
Introduction
2-7
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
The Router’s Front Panel
The front panel shown below contains status LEDs.
1
2
3
4
5
6
7
1
2
3
4
5
Figure 2-1
Table 2-1.
LED Descriptions
Label
Activity
Description
On (Green)
On (Red)
Off
Power is supplied to the router.
Power-on Self-test failure or device malfunction.
Power is not supplied to the router.
1. Power
2. Test
On (Amber)
Blink (Amber)
Off
System is not ready or failed to start up.
The system is initializing.
The system is ready and running.
On (Green)
Blink (Green)
Off
ADSL is synchronized.
DSL is attempting to synchronize.
No link is detected on this port or modem is not powered on.
3. ADSL
2-8
Introduction
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Table 2-1.
LED Descriptions (continued)
On (Green) Internet port is connected, has an IP address, DSL is up, no traffic
Flicker (Green) detected.
Red
Off
Traffic is passing through the connected internet port in either
direction.
Device attempted to connect, but failed.
Modem powered off or in bridged mode, or ADSL connection not
present.
4. Internet
5. Wireless
On (Green)
Blink (Green)
Off
Wireless port is linked.
Data is being transmitted or received.
No wireless link.
On (Green)
Fast blink
Slow blink
Off
Registered to SIP server.
Talking.
Off hook.
6. Phone1
Phone2
Phone not ready.
On (Green)
Blink
Off
PSTN line detected.
Talking.
No PSTN line detected.
7. FXO/
PSTN
fallback
The Router’s Rear Panel
The rear panel of the Integrated ADSL Modem and Wireless Router with Voice, Model
4
2
6
1
5
7
3
Figure 2-2
Introduction
2-9
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Viewed from left to right, the rear panel contains the following elements:
1. RJ-11 ADSL port for connecting the modem router to an ADSL-capable telephone wall jack
via the ADSL port of an ADSL filter/splitter.
2. PSTN (Public Service Telephone Network) port for connecting to a telephone wall jack via the
phone port of an ADSL filter/splitter.
3. Phone Ports for connecting to a telephones
4. Four Local Ethernet RJ-45 LAN ports for connecting the modem router to the local computers
5. Factory Default Reset push button
6. AC power adapter inlet
7. Wireless antenna
Each LAN port has two LEDs, one green and one amber. They indicate the port status as follows:
•
•
•
•
•
On (Green)
Blink (Green)
On (Amber)
LAN port is linked to a 100Mbps device
Data is being transmitted or received at 100 Mbps
LAN port is linked to a 10Mbps device
Blink (Amber) Data is being transmitted or received at 10 Mbps
Off No link is detected on this port
Connecting the Router to the Internet
To connect your Integrated ADSL Modem Wireless Router with Voice to the Internet, refer to the
Integrated ADSL Modem and Wirelesss Router Setup Manual on the resource CD or online at
2-10
Introduction
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Wireless Configuration
This chapter describes how to configure the wireless features of your Integrated ADSL Modem
and Wireless Router with Voice, Model DG834GV.
Considerations for a Wireless Network
In planning your wireless network, you should consider the level of security required. You should
also select the physical placement of your modem router in order to maximize the network speed.
To ensure proper compliance and compatibility between similar products in your area, the
operating channel and region must be set correctly.
Observe Performance, Placement, and Range Guidelines
The operating distance or range of your wireless connection can vary significantly based on the
physical placement of the wireless firewall. The latency, data throughput performance, and
notebook power consumption also vary depending on your configuration choices.
Note: Failure to follow these guidelines can result in significant performance degradation
or inability to wirelessly connect to the router. For complete range/performance
For best results, place your firewall:
•
•
Near the center of the area in which your computers will operate
In an elevated location such as a high shelf where the wirelessly connected computers have
line-of-sight access (even if through walls)
•
•
•
Away from sources of interference, such as computers, microwaves, and cordless phones
With the Antenna tight and in the upright position
Away from large metal surfaces
Wireless Configuration
3-1
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
The time it takes to establish a wireless connection can vary depending on both your security
settings and placement. WEP connections can take slightly longer to establish. Also, WEP
encryption can consume more battery power on a notebook computer.
Implement Appropriate Wireless Security
Note: Indoors, computers can connect over 802.11g wireless networks at a maximum
range of up to 300 feet. Such distances can allow for others outside of your
immediate area to access your network.
Unlike wired network data, your wireless data transmissions can extend beyond your walls and
can be received by anyone with a compatible adapter. For this reason, use the security features of
your wireless equipment. The Integrated ADSL Modem Wireless Router with Voice provides
highly effective security features which are covered in detail in this chapter. Deploy the security
features appropriate to your needs.
Figure 3-1
There are several ways you can enhance the security of your wireless network:
•
Restrict Access Based on MAC Address. You can allow only trusted PCs to connect so that
unknown PCs cannot wirelessly connect to the DG834GV. Restricting access by MAC
address adds an obstacle against unwanted access to your network, but the data broadcast over
the wireless link is fully exposed.
•
Turn Off the Broadcast of the Wireless Network Name SSID. If you disable broadcast of
the SSID, only devices that have the correct SSID can connect. This nullifies wireless network
‘discovery’ feature of some products, such as Windows XP, but the data is still exposed.
3-2
Wireless Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
•
•
WEP. Wired Equivalent Privacy (WEP) data encryption provides data security. WEP Shared
Key authentication and WEP data encryption will block all but the most determined
eavesdropper.
WPA. Wi-Fi Protected Access (WPA) data encryption provides data security. The very strong
authentication along with dynamic per frame re-keying of WPA make it virtually impossible to
compromise. Because this is a new standard, wireless device driver and software availability
may be limited.
Understanding Wireless Settings
To configure the Wireless interface of your modem router, click the Wireless Settings link in the
Setup section of the main menu. The Wireless Settings menu will appear, similar to that shown
below:
Figure 3-2
Wireless Configuration
3-3
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
The following parameters are in the Wireless Settings menu:
•
Wireless Network.
— Name (SSID). The Service Set ID, also known as the wireless network name. Enter a
value of up to 32 alphanumeric characters. The same Name (SSID) must be assigned to all
wireless devices in your network. The default SSID is NETGEAR, but NETGEAR
strongly recommends that you change your network Name to a different value.
Note: This value is case sensitive. For example, Wireless is not the same as
wireless.
— Region. Select your country/region from the drop-down list. This field displays the region
of operation for which the wireless interface is intended.
Note: In the USA, the Region is preset according to regulatory requirements and
cannot be changed. In other areas, you can and must set the Region. It may
not be legal to operate the wireless access point in a region other than one
of those identified in this field.
— Channel. This field determines which operating frequency will be used. It should not be
necessary to change the wireless channel unless you notice interference problems with
another nearby access point.
— Mode. The default is "g & b", which allows both "g" and "b" wireless stations to access
this device. “g only” allows only 802.11g wireless stations to be used. “b only” allows
802.11b wireless stations; 802.11g wireless stations can still be used if they can operate in
802.11b mode.
•
Wireless Access Point.
— Enable Wireless Access Point. This field lets you turn off or turn on the wireless access
point built in to the modem router. The wireless icon on the front of the modem router will
also display the current status of the Wireless Access Point to let you know if it is disabled
or enabled. The wireless access point must be enabled to allow wireless stations to access
the Internet.
— Allow Broadcast of Name (SSID). If enabled, the SSID is broadcast to all Wireless
Stations. Stations which have no SSID (or a "null" value) can then adopt the correct SSID
for connections to this Access Point.
3-4
Wireless Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
— Wireless Isolation. If enabled, Wireless Stations will not be able to communicate with
each other or with Stations on the wired network. This feature should normally be
disabled.
•
•
Wireless Station Access List.
— By default, any wireless computer that is configured with the correct wireless network
name or SSID will be allowed access to your wireless network. For increased security, you
can restrict access to the wireless network to only specific computers based on their MAC
addresses. Click Setup Access List to display the Wireless Station Access List menu.
Security Options
Table 3-1.
Wireless Security Options
Description
Field
Disable
Wireless security is not used.
WEP (Wired
Equivalent
Privacy)
You can select the following WEP options:
Authentication Type
• Open: the DG834GV does not perform any authentication.
• Shared: WEP shared key authentication. For a full explanation of WEP shared key,
Encryption Strength
• If Shared or Open Network Authentication is enabled, you can choose 64- or 128-bit
WEP data encryption.
Note: With Open Network Authentication and 64- or 128-bit WEP Data Encryption, the
DG834GV does perform 64- or 128-bit data encryption but does not perform any
authentication.
Security Encryption (WEP) Key
These key values must be identical on all wireless devices in your network (key 1 must
be the same for all, key 2 must be the same for all, and so on).
The DG834GV provides two methods for creating WEP encryption keys:
• Passphrase. These characters are case sensitive. Enter a word or group of printable
characters in the Passphrase box and click the Generate button.
Note: Not all wireless adapters support passphrase key generation.
• Manual. These values are not case sensitive.
64-bit WEP: enter 10 hexadecimal digits (any combination of 0-9, a-f, or A-F).
128-bit WEP: enter 26 hexadecimal digits (any combination of 0-9, a-f, or A-F).
Wireless Configuration
3-5
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Table 3-1.
Field
Wireless Security Options (continued)
Description
WPA-PSK (Wi- WPA Pre-Shared-Key uses a pre-shared key to perform the authentication and
Fi Protected
Access Pre-
Shared Key)
generate the initial data encryption keys. Then, it dynamically varies the encryption key.
Note: Not all wireless adapters support WPA. Furthermore, client software is required
on the client. Windows XP and Windows 2000 with Service Pack 3 do include the client
software that supports WPA. Nevertheless, the wireless adapter hardware and driver
must also support WPA.
WPA-802.1x
User authentication is implemented using 802.1x and RADIUS servers. For a full
Fill in the following:
• Radius Server Name/IP Address
This field is required. Enter the name or IP address of the Radius Server on your LAN.
• Radius Port
Enter the port number used for connections to the Radius Server.
• Radius Shared Key
Enter the desired value for the Radius shared key. This key enables the DG834GV to
log in to the Radius server and must match the value used on the Radius server.
How to Set Up and Test Basic Wireless Connectivity
Follow the instructions below to set up and test basic wireless connectivity. Once you have
established basic wireless connectivity, you can enable security settings appropriate to your needs.
1. Log in to the DG834GV modem router at its default LAN address of http://192.168.0.1 with
its default user name of admin and default password of password, or using whatever LAN
address and password you have set up.
2. Click the Wireless Settings link in the main menu of the DG834GV modem router.
3. Choose a suitable descriptive name for the wireless network name (SSID). In the SSID box,
enter a value of up to 32 alphanumeric characters. The default SSID is Wireless.
Note: The SSID of any wireless access adapters must match the SSID you configure
in the Integrated ADSL Modem and Wireless Router with Voice, Model
DG834GV. If they do not match, you will not get a wireless connection to the
DG834GV.
3-6
Wireless Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
4. Set the Region. Select the region in which the wireless interface will operate.
5. Set the Channel. The default channel is 11.
This field determines which operating frequency will be used. It should not be necessary to
change the wireless channel unless you notice interference problems with another nearby
wireless router or access point. Select a channel that is not being used by any other wireless
networks within several hundred feet of your firewall. For more information on the wireless
6. For initial configuration and test, leave the Wireless Card Access List set to allow everyone
access by making sure that Turn Access Control On is not selected in the Wireless Station
Access List. In addition, leave the Encryption Strength set to “Disabled.”
7. Click Apply to save your changes.
Note: If you are configuring the modem router from a wireless computer and you
change the modem router’s SSID, channel, or security settings, you will lose
your wireless connection when you click Apply. You must then change the
wireless settings of your computer to match the firewall’s new settings.
8. Configure and test your computers for wireless connectivity.
Program the wireless adapter of your computers to have the same SSID and channel that you
configured in the router. Check that they have a wireless link and are able to obtain an IP
address by DHCP from the modem router.
Once your computers have basic wireless connectivity to the modem router, you can configure the
advanced wireless security functions.
How to Restrict Wireless Access to Your Network
By default, any wireless PC that is configured with the correct SSID will be allowed access to your
wireless network. For increased security, the Integrated ADSL Modem and Wireless Router with
Voice, Model DG834GV provides several ways to restrict wireless access to your network:
•
•
•
Turn off wireless connectivity completely
Restrict access based on the Wireless Network Name (SSID)
Restrict access based on the Wireless Card Access List
Wireless Configuration
3-7
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
These options are discussed below.
Figure 3-3
Restricting Access to Your Network by Turning Off Wireless Connectivity
You can completely turn off the wireless portion of the DG834GV. For example, if your notebook
computer is used to wirelessly connect to your router and you take a business trip, you can turn off
the wireless portion of the router while you are traveling. Other members of your household who
use computers connected to the router via Ethernet cables will still be able to use the router.
Restricting Wireless Access Based on the Wireless Network Name (SSID)
The DG834GV can restrict wireless access to your network by not broadcasting the wireless
network name (SSID). However, by default, this feature is turned off. If you turn this feature on,
wireless devices will not ‘see’ your DG834GV. You must configure your wireless devices to
match the wireless network name (SSID) you configure in the Integrated ADSL Modem Wireless
Router with Voice.
Note: The SSID of any wireless access adapters must match the SSID you configure in
the Integrated ADSL Modem and Wireless Router with Voice, Model DG834GV.
If they do not match, you will not get a wireless connection to the DG834GV.
Restricting Wireless Access Based on the Wireless Station Access List
This list determines which wireless hardware devices will be allowed to connect to the modem
router.
To restrict access based on MAC addresses, follow these steps:
1. Log in to the DG834GV Integrated ADSL Modem Wireless Router with Voice at its default
LAN address of http://192.168.0.1 with its default user name of admin and default password
of password, or using whatever LAN address and password you have set up.
3-8
Wireless Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
2. From the Wireless Settings menu, Wireless Station Access List section, click the Setup Access
List button to display the list, shown below:
Figure 3-4
3. Select the Turn Access Control On check box to enable restricting wireless computers by
their MAC addresses.
4. If the wireless station is currently connected to the network, you can select it from the
Available Wireless Stations list. Click Add to add the station to the Trusted Wireless Stations
list.
5. If the wireless station is not currently connected, you can enter its address manually. Enter the
MAC address of the authorized computer. The MAC address is usually printed on the wireless
card, or it may appear in the modem router’s DHCP table. The MAC address will be 12
hexadecimal digits.
Click Add to add your entry. You can add several stations to the list, but the entries will be
discarded if you do not click Apply.
Wireless Configuration
3-9
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
You can copy and paste the MAC addresses from the modem router’s Attached Devices menu
into the MAC Address box of this menu. To do this, configure each wireless computer to
obtain a wireless link to the modem router. The computer should then appear in the Attached
Devices menu.
Note: If you are configuring the modem router from a wireless computer whose
MAC address is not in the Trusted Wireless Stations list, and you select
Trusted Wireless Stations only, you will lose your wireless connection when
you click Apply. You must then access the modem router from a wired
computer to make any further changes.
6. Make sure the Turn Access Control On check box is selected, then click Apply.
Now, only devices on this list will be allowed to wirelessly connect to the DG834GV. This
prevents unauthorized access to your network.
How to Configure WEP
To configure WEP data encryption, follow these steps:
1. Log in to the DG834GV firewall at its default LAN address of http://192.168.0.1 with its
default user name of admin and default password of password, or using whatever LAN
address and password you have set up.
2. Click the Wireless Settings link in the Setup section of the main menu for the DG834GV
modem router.
3. In the Security Options section, select the WEP (Wired Equivalent Privacy) radio button
3-10
Wireless Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
4. Go to the WEP Security Encryption portion of the page:
Figure 3-5
5. Select the Authentication Type.
6. Select the Encryption Strength setting.
7. Enter the encryption keys. You can manually or automatically program the four data
encryption keys. These values must be identical on all computers and Access Points in your
network.
•
Automatic — enter a word or group of printable characters in the Passphrase box and click
the Generate button. The four key boxes will be automatically populated with key values.
•
Manual — enter hexadecimal digits (any combination of 0-9, a-f, or A-F).
Select which of the four keys will be active.
8. Select the radio button for the key you want to make active.
Be sure you clearly understand how the WEP key settings are configured in your wireless
adapter. Wireless adapter configuration utilities such as the one included in Windows XP only
allow entry of one key which must match the default key you set in the DG834GV.
9. Click Apply to save your settings.
Note: When configuring the modem router from a wireless computer, if you configure
WEP settings, you will lose your wireless connection when you click Apply. You
must then either configure your wireless adapter to match the modem router WEP
settings or access the modem router from a wired computer to make any further
changes.
Wireless Configuration
3-11
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
How to Configure WPA-PSK
Note: Not all wireless adapters support WPA. Consult the product document for your
wireless adapter for instructions on configuring WPA settings.
To configure WPA-PSK, follow these steps:
1. Log in at the default LAN address of http://192.168.0.1, with the default user name of admin
and default password of password, or using whatever LAN address and password you have
set up.
2. Click Wireless Settings in the Setup section of the main menu of the DG834GV.
3. Choose the WPA-PSK radio button. The WPA-PSK page will display a WPA-PSK Security
Encryption section.
4. Enter the pre-shared key in the Passphrase field.
5. Click Apply to save your settings.
How to Configure WPA-802.1x
Note: Not all wireless adapters support WPA. Consult the product document for your
wireless adapter for instructions on configuring WPA settings.
To configure WPA-802.1x, follow these steps:
1. Log in at the default LAN address of http://192.168.0.1, with the default user name of admin
and default password of password, or using whatever LAN address and password you have
set up.
2. Click Wireless Settings in the Setup section of the main menu of the DG834GV.
3. Choose the WPA-802.1x radio button. The page will display the WPA-802.1x section.
4. Enter the Radius server name/IP address.
5. Enter the Radius port number.
6. Enter the Shared Key.
7. Click Apply to save your settings.
3-12
Wireless Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
VoIP and Telephone Settings
This chapter describes how to configure the telephony features of your Integrated ADSL Modem
and Wireless Router with Voice, Model DG834GV.
Configuring the Telephony Settings
The Integrated ADSL Modem and Wireless Router with Voice, Model DG834GV provides menus
to configure and view the telephony settings. The settings are organized into two categories: VoIP
(Voice over Internet Protocol) settings for internet telephony, and PSTN (Public Switched
Telephone Network) settings for analog telephone fallback. The menus enable you to perform the
following tasks:
•
•
•
•
Configure the VoIP settings
Configure the PSTN settings
View the VoIP status
View the call log
These features are discussed below.
VoIP and Telephone Settings
4-1
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Setting Up the Voice-over-IP Settings
Select VoIP Settings from the Telephony section of the main menu. The modem router will
display a window similar to the following:
Figure 4-1
The VoIP settings may be provisioned by your Voice Service Provider (VSP) in one of two
different methods: TFTP provisioning or dialog-based provisioning. Refer to the instructions
provided by your VSP, to ascertain which method to use.
4-2
VoIP and Telephone Settings
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
If your VSP uses TFTP provisioning, set up your
If this modem router was provided by your VSP, the settings may be preconfigured. Otherwise, to
set up your Voice account, refer to the instructions provided by your Voice Service Provider.
The Service section of the window is for setting up your SIP (Session Initiation Protocol) settings.
SIP is a protocol for creating, modifying, and terminating telephony sessions over the internet.
Setting Up the PSTN Settings
Use the PSTN Settings menu to set which telephone numbers, if any, will be diverted to the PSTN
line. You can specify a prefix that, when dialed before the telephone number, will cause the call to
be diverted to the PSTN line. Also, specific numbers can always be diverted to the PSTN line.
1. Click the PSTN Settings link in the Telephony section of the main menu.
Figure 4-2
2. To specify a prefix for diverting calls to the PSTN line, edit the entry in the PSTN Prefix text
box. If you want to use only one character, it must be the * character. If you want to use more
than one prefix character, the first character can be the * character or a digit, and all
subsequent characters must be digits.
VoIP and Telephone Settings
4-3
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
3. Add telephone numbers to the “PSTN Fixed Relay” and “Emergency” groups as required. Any
numbers entered into either of these sections will always be diverted to the traditional
analogue PSTN line without the need for dialing the PSTN prefix.
4. Click the Apply button to save your settings.
Viewing the Voice Status
The VoIP Status menu shows the current status of the Voice over IP connection. Click on the VoIP
Status link in the Telephony section of the main menu.
Figure 4-3
4-4
VoIP and Telephone Settings
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Line 1/Line 2
•
Display Name is the name you chose when you first opened your account. Your display name
will be visible to other individuals with caller ID.
Note: If your display name appears as "UNAVAILABLE", either your account has
not been established or your router is unable to connect to the Internet.
•
Telephone Number is the telephone number other people will use when they call you. This
number was assigned to your router when you first established your account. Each line can
have a different telephone number.
Note: If your Telephone Number appears as "phonenumber", either your account has
not been established or your router has been unable to connect to the Internet.
Line 1/Line 2 Status
•
Hook State—displays the condition of the telephone receiver. ON indicates the receiver is on
its cradle, while OFF indicates the receiver is not seated on its cradle.
•
Registration State—displays “Success” when your router has successfully connected to the
VoIP servers. However, if you do not have a VOIP account or if the router could not connect to
the VoIP servers, the status will be displayed as “Idle“.
Viewing the Call Log
Note to reviewers: All I got was one blank box with no buttons when this page was displayed. This
was at odds with the information on the help page.
VoIP and Telephone Settings
4-5
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
4-6
VoIP and Telephone Settings
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Protecting Your Network
This chapter describes how to use the basic firewall features of the Integrated ADSL Modem and
Wireless Router with Voice, Model DG834GV to protect your network.
Protecting Access to Your Integrated ADSL Modem and
Wireless Router with Voice, Model DG834GV
For security reasons, the modem router has its own user name and password. Also, after a period
of inactivity for a set length of time, the administrator login will automatically disconnect. When
prompted, enter admin for the modem router User Name and password for the modem router
Password. You can use procedures below to change the modem router's password and the amount
of time for the administrator’s login timeout.
Note: The user name and password are not the same as any user name or password you
may use to log in to your Internet connection.
NETGEAR recommends that you change this password to a more secure password. The ideal
password should contain no dictionary words from any language, and should be a mixture of both
upper and lower case letters, numbers, and symbols. Your password can be up to 30 characters.
How to Change the Built-In Password
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
User Name of admin, default password of password, or using whatever Password and LAN
address you have chosen for the modem router.
Figure 5-1
Protecting Your Network
5-1
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
2. From the Main Menu of the browser interface, under the Maintenance heading, select Set
Password to bring up the menu shown.
Figure 5-2
3. To change the password, first enter the old password, and then enter the new password twice.
4. Click Apply to save your changes.
Note: After changing the password, you will be required to log in again to continue
the configuration. If you have backed up the modem router settings previously,
you should do a new backup so that the saved settings file includes the new
password.
Changing the Administrator Login Timeout
For security, the administrator's login to the modem router configuration will timeout after a
period of inactivity. To change the login timeout period:
1. In the Set Password menu, type a number in ‘Administrator login times out’ field. The
suggested default value is 5 minutes.
2. Click Apply to save your changes or click Cancel to keep the current period.
5-2
Protecting Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Configuring Basic Firewall Services
Basic firewall services you can configure include access blocking and scheduling of firewall
security. These topics are presented below.
Blocking Keywords, Sites, and Services
The modem router provides a variety of options for blocking Internet based content and
communications services. With its content filtering feature, the Integrated ADSL Modem Wireless
Router with Voice prevents objectionable content from reaching your PCs. The modem router
allows you to control access to Internet content by screening for keywords within Web addresses.
Key content filtering options include:
•
•
Keyword blocking of HTTP traffic.
Outbound Service Blocking limits access from your LAN to Internet locations or services that
you specify as off-limits.
•
•
Denial of Service (DoS) protection. Automatically detects and thwarts Denial of Service
(DoS) attacks such as Ping of Death, SYN Flood, LAND Attack and IP Spoofing.
Blocking unwanted traffic from the Internet to your LAN.
The section below explains how to configure your modem router to perform these functions.
How to Block Keywords and Sites
The Integrated ADSL Modem Wireless Router with Voice allows you to restrict access to Internet
content based on functions such as Web addresses and Web address keywords.
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
User Name of admin, default password of password, or using whatever Password and LAN
address you have chosen for the modem router.
Protecting Your Network
5-3
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
2. Select the Block Sites link in the Content Filtering section of the main menu.
Figure 5-3
3. To enable keyword blocking, select one of the following:
•
Per Schedule—to turn on keyword blocking according to the settings on the Schedule
page.
•
Always—to turn on keyword blocking all of the time, independent of the Schedule page.
4. Enter a keyword or domain in the Keyword box, click Add Keyword, then click Apply.
Some examples of Keyword application follow:
•
•
•
If the keyword “XXX” is specified, the URL <http://www.badstuff.com/xxx.html> is
blocked.
If the keyword “.com” is specified, only Web sites with other domain suffixes (such as
.edu or .gov) can be viewed.
Enter the keyword “.” to block all Internet browsing access.
Up to 32 entries are supported in the Keyword list.
5-4
Protecting Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
5. To delete a keyword or domain, select it from the list, click Delete Keyword, then click
Apply.
6. To specify a trusted user, enter that computer’s IP address in the Trusted IP Address box and
click Apply.
You can specify one trusted user, which is a computer that will be exempt from blocking and
logging. Since the trusted user will be identified by an IP address, you should configure that
computer with a fixed IP address.
7. Click Apply to save your settings.
Firewall Rules
Firewall rules are used to block or allow specific traffic passing through from one side of the router
to the other. Inbound rules (WAN to LAN) restrict access by outsiders to private resources,
selectively allowing only specific outside users to access specific resources. Outbound rules (LAN
to WAN) determine what outside resources local users can have access to.
A firewall has two default rules, one for inbound traffic and one for outbound. The default rules of
the DG834GV are:
•
•
Inbound: Block all access from outside except responses to requests from the LAN side.
Outbound: Allow all access from the LAN side to the outside.
You can define additional rules that will specify exceptions to the default rules. By adding custom
rules, you can block or allow access based on the service or application, source or destination IP
addresses, and time of day. You can also choose to log traffic that matches or does not match the
rule you have defined.
You can change the order of precedence of rules so that the rule that applies most often will take
Protecting Your Network
5-5
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
To access the rules configuration of the DG834GV, click the Firewall Rules link on the main
menu, then click Add for either an Outbound or Inbound Service.
Figure 5-4
•
•
•
To edit an existing rule, select its button on the left side of the table and click Edit.
To delete an existing rule, select its button on the left side of the table and click Delete.
To move an existing rule to a different position in the table, select its button on the left side of
the table and click Move. At the script prompt, enter the number of the desired new position
and click OK.
Inbound Rules (Port Forwarding)
Because the DG834GV uses Network Address Translation (NAT), your network presents only one
IP address to the Internet, and outside users cannot directly address any of your local computers.
However, by defining an inbound rule you can make a local server (for example, a Web server or
game server) visible and available to the Internet. The rule tells the modem router to direct
inbound traffic for a particular service to one local server based on the destination port number.
This is also known as port forwarding.
Note: Some residential broadband ISP accounts do not allow you to run any server
processes (such as a Web or FTP server) from your location. Your ISP may
periodically check for servers and may suspend your account if it discovers any
active services at your location. If you are unsure, refer to the Acceptable Use
Policy of your ISP.
5-6
Protecting Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Remember that allowing inbound services opens holes in your firewall. Only enable those ports
that are necessary for your network. Following are two application examples of inbound rules:
Inbound Rule Example: A Local Public Web Server
If you host a public Web server on your local network, you can define a rule to allow inbound Web
(HTTP) requests from any outside IP address to the IP address of your Web server at any time of
day. This rule is shown:
Figure 5-5
The parameters are:
•
•
•
Service—From this list, select the application or service to be allowed or blocked. The list
already displays many common services, but you are not limited to these choices. Use the
Services menu to add any additional services or applications that do not already appear.
Action—Choose how you want this type of traffic to be handled. You can block or allow
always, or you can choose to block or allow according to the schedule you have defined in the
Schedule menu.
Send to LAN Server—Enter the IP address of the computer or server on your LAN which
will receive the inbound traffic covered by this rule.
Protecting Your Network
5-7
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
•
WAN Users—These settings determine which packets are covered by the rule, based on their
source (WAN) IP address. Select the desired option:
–
–
–
Any — all IP addresses are covered by this rule.
Address range — if this option is selected, you must enter the Start and Finish fields.
Single address — enter the required address in the Start field.
•
Log—You can select whether the traffic will be logged. The choices are:
–
–
–
–
Never — no log entries will be made for this service.
Always — any traffic for this service type will be logged.
Match — traffic of this type which matches the parameters and action will be logged.
Not match — traffic of this type which does not match the parameters and action will be
logged.
Inbound Rule Example: Allowing Videoconferencing
If you want to allow incoming videoconferencing to be initiated from a restricted range of outside
IP addresses, such as from a branch office, you can create an inbound rule. In the example shown
here, CU-SeeMe connections are allowed only from a specified range of external IP addresses. In
this case, we have also specified logging of any incoming CU-SeeMe requests that do not match
the allowed parameters.
Figure 5-6
5-8
Protecting Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Considerations for Inbound Rules
If your external IP address is assigned dynamically by your ISP, the IP address may change
periodically as the DHCP lease expires. Consider using the Dynamic DNS feature in the Advanced
menu so that external users can always find your network.
If the IP address of the local server computer is assigned by DHCP, it may change when the
computer is rebooted. To avoid this, use the Reserved IP address feature in the LAN IP menu to
keep the computer’s IP address constant.
Local computers must access the local server using the computer’s local LAN address
(192.168.0.11 in the example above). Attempts by local computers to access the server using the
external WAN IP address will fail.
Outbound Rules (Service Blocking)
The DG834GV allows you to block the use of certain Internet services by computers on your
network. This is called service blocking or port filtering. You can define an outbound rule to block
Internet access from a local computer based on:
•
•
•
•
IP address of the local computer (source address)
IP address of the Internet site being contacted (destination address)
Time of day
Type of service being requested (service port number)
Following is an application example of outbound rules.
Protecting Your Network
5-9
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Outbound Rule Example: Blocking Instant Messenger
If you want to block Instant Messenger usage by employees during working hours, you can create
an outbound rule to block that application from any internal IP address to any external address
according to the schedule that you have created in the Schedule menu. You can also have the
modem router log any attempt to use Instant Messenger during that blocked period.
Figure 5-7
The parameters are:
•
Service—From this list, select the application or service to be allowed or blocked. The list
already displays many common services, but you are not limited to these choices. Use the Add
Custom Service feature to add any additional services or applications that do not already
appear.
•
•
Action—Choose how you want this type of traffic to be handled. You can block or allow
always, or you can choose to block or allow according to the schedule you have defined in the
Schedule menu.
LAN Users—These settings determine which packets are covered by the rule, based on their
source LAN IP address. Select the desired option:
–
–
–
Any — all IP addresses are covered by this rule.
Address range — if this option is selected, you must enter the Start and Finish fields.
Single address — enter the required address in the Start field.
5-10
Protecting Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
•
•
WAN Users—These settings determine which packets are covered by the rule, based on their
destination WAN IP address. Select the desired option:
–
–
–
Any — all IP addresses are covered by this rule.
Address range —if this option is selected, you must enter the Start and Finish fields.
Single address — enter the required address in the Start field.
Log—You can select whether the traffic will be logged. The choices are:
–
–
–
–
Never — no log entries will be made for this service.
Always — any traffic for this service type will be logged.
Match — traffic of this type that matches the parameters and action will be logged.
Not match — traffic of this type that does not match the parameters and action will be
logged.
Order of Precedence for Rules
As you define new rules, they are added to the tables in the Rules menu, as shown:
Figure 5-8
Protecting Your Network
5-11
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
For any traffic attempting to pass through the firewall, the packet information is subjected to the
rules in the order shown in the Rules Table, beginning at the top and proceeding to the default rules
at the bottom. In some cases, the order of precedence of two or more rules may be important in
determining the disposition of a packet. The Move button allows you to relocate a defined rule to a
new position in the table.
Services
Services are functions performed by server computers at the request of client computers. For
example, Web servers serve Web pages, time servers serve time and date information, and game
hosts serve data about other players’ moves. When a computer on the Internet sends a request for
service to a server computer, the requested service is identified by a service or port number. This
number appears as the destination port number in the transmitted IP packets. For example, a packet
that is sent with destination port number 80 is an HTTP (Web server) request.
The service numbers for many common protocols are defined by the Internet Engineering Task
Force (IETF) and published in RFC1700, “Assigned Numbers.” Service numbers for other
applications are typically chosen from the range 1024 to 65535 by the authors of the application.
Although the DG834GV already holds a list of many service port numbers, you are not limited to
these choices. Use the procedure below to create your own service definitions.
How to Define Services
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
User Name of admin, default password of password, or using whatever Password and LAN
address you have chosen for the modem router.
2. Select the Services link of the Security menu to display the Services menu shown:
Figure 5-9
5-12
Protecting Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
•
•
To create a new Service, click the Add Custom Service button.
To edit an existing Service, select its button on the left side of the table and click Edit
Service.
•
To delete an existing Service, select its button on the left side of the table and click Delete
Service.
3. Use the page shown below to define or edit a service.
Figure 5-10
4. Click Apply to save your changes.
Setting Times and Scheduling Firewall Services
The Integrated ADSL Modem Wireless Router with Voice uses the Network Time Protocol (NTP)
to obtain the current time and date from one of several Network Time Servers on the Internet.
How to Set Your Time Zone
In order to localize the time for your log entries, you must specify your Time Zone:
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
User Name of admin, default password of password, or using whatever Password and LAN
address you have chosen for the modem router.
Protecting Your Network
5-13
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
2. Select the Schedule link in the Maintenance section of the main menu, as shown below.
Figure 5-11
3. Select your time zone. This setting will be used for the blocking schedule according to your
local time zone and for time-stamping log entries.
Select the Adjust for daylight savings time check box if your time zone is currently in
daylight savings time.
Note: If your region uses Daylight Savings Time, you must manually select Adjust
for Daylight Savings Time on the first day of Daylight Savings Time, and
clear it at the end. Enabling Daylight Savings Time will cause one hour to be
added to the standard time.
4. The modem router has a list of NETGEAR NTP servers. If you would prefer to use a particular
NTP server as the primary server, enter its IP address under Use this NTP Server.
5-14
Protecting Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
5. Click Apply to save your settings.
How to Schedule Firewall Services
If you enabled services blocking in the Block Services menu or Port forwarding in the Ports menu,
you can set up a schedule for when blocking occurs or when access is not restricted.
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
User Name of admin, default password of password, or using whatever Password and LAN
address you have chosen for the modem router.
3. To block Internet services based on a schedule, select Every Day or select one or more days. If
you want to limit access completely for the selected days, select All Day. Otherwise, to limit
access during certain times for the selected days, enter Start Blocking and End Blocking times.
4. Enter the values in 24-hour time format. For example, 10:30 am would be 10 hours and 30
minutes and 10:30 pm would be 22 hours and 30 minutes. If you set the start time after the end
time, the schedule will be effective through midnight the next day.
5. Click Apply to save your changes.
Protecting Your Network
5-15
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
5-16
Protecting Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
Managing Your Network
This chapter describes how to perform network management tasks with your Integrated ADSL
Modem and Wireless Router with Voice, Model DG834GV.
Backing Up, Restoring, or Erasing Your Settings
The configuration settings of the Integrated ADSL Modem Wireless Router with Voice are stored
in a configuration file in the modem router. This file can be backed up to your computer, restored,
or reverted to factory default settings. The procedures below explain how to do these tasks.
How to Back Up the Configuration to a File
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
User Name of admin, default password of password, or using whatever User Name,
Password and LAN address you have chosen for the modem router.
2. From the Maintenance heading of the Main Menu, select the Backup Settings menu shown.
Figure 6-1
Managing Your Network
6-1
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
3. Click Backup to save a copy of the current settings.
4. Store the .cfgfile on a computer on your network.
How to Restore the Configuration from a File
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
User Name of admin, default password of password, or using whatever User Name,
Password and LAN address you have chosen for the modem router.
2. From the Maintenance heading of the Main Menu, select the Backup Settings menu.
3. Enter the full path to the file on your network or click the Browse button to locate the file.
4. When you have located the .cfgfile, click the Restore button to upload the file to the modem
router.
5. The modem router will then reboot automatically.
How to Erase the Configuration
It is sometimes desirable to restore the modem router to the factory default settings. This can be
done by using the Erase function.
1. To erase the configuration, from the Maintenance menu Backup Settings link, click the Erase
button on the screen.
2. The modem router will then reboot automatically.
After an erase, the modem router's password will be password, the LAN IP address will be
192.168.0.1, and the modem router's DHCP client will be enabled.
Note: To restore the factory default configuration settings without knowing the login
password or IP address, you must use the Default Reset button on the rear panel of
6-2
Managing Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Upgrading the Modem Router’s Firmware
The software of the Integrated ADSL Modem Wireless Router with Voice is stored in FLASH
memory, and can be upgraded as new software is released by NETGEAR.
Upgrade files can be downloaded from NETGEAR's Web site. If the upgrade file is compressed
(.ZIP file), you must first extract the binary (.BIN or .IMG) file before uploading it to the modem
router.
How to Upgrade the Modem Router Firmware
NETGEAR recommends that you back up your configuration before doing a firmware upgrade.
After the upgrade is complete, you may need to restore your configuration settings.
1. Download and unzip the new software file from NETGEAR.
The Web browser used to upload new firmware into the modem router must support HTTP
uploads. NETGEAR recommends using Microsoft Internet Explorer 5.0 or above, or Netscape
Navigator 4.7 or above.
2. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
User Name of admin, default password of password, or using whatever User Name,
Password and LAN address you have chosen for the modem router.
3. From the Main Menu of the browser interface, under the Maintenance heading, select the
Router Upgrade heading to display the menu shown.
Figure 6-2
Managing Your Network
6-3
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
4. In the Modem Router Upgrade menu, click the Browse to locate the binary (.BIN or .IMG)
upgrade file.
5. Click Upload.
Warning: When uploading software to the modem router, it is important not to
interrupt the Web browser by closing the window, clicking a link, or
loading a new page. If the browser is interrupted, it may corrupt the
software. When the upload is complete, your modem router will
automatically restart. The upgrade process will typically take about one
minute. In some cases, you may need to clear the configuration and
reconfigure the modem router after upgrading.
6-4
Managing Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Network Management Information
The DG834GV provides a variety of status and usage information which is discussed below.
Viewing Modem Router Status and Usage Statistics
From the Main Menu, under Maintenance, click Router Status to view this screen.
Figure 6-3
The Modem Router Status menu provides status and usage information.
Managing Your Network
6-5
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
This screen shows the following parameters:
Table 6-1. Menu 3.2 - Modem Router Status Fields
Field
Description
Account Name
The Host Name assigned to the modem router in the Basic Settings
menu.
Firmware Version
ADSL Port
This field displays the modem router firmware version.
These parameters apply to the Internet (ADSL) port of the modem
router.
MAC Address
IP Address
This field displays the Ethernet MAC address being used by the Internet
(ADSL) port of the modem router.
This field displays the IP address being used by the Internet (ADSL)
port of the modem router. If no address is shown, the modem router
cannot connect to the Internet.
Network Type
The network type depends is determined by your ISP. Common network
types are PPPoE and PPPoA.
IP Subnet Mask
This field displays the IP Subnet Mask being used by the Internet
(ADSL) port of the modem router.
Domain Name Server
(DNS)
This field displays the DNS Server IP addresses being used by the
modem router. These addresses are usually obtained dynamically from
the ISP.
LAN Port
These parameters apply to the Local (ADSL) port of the modem router.
MAC Address
This field displays the Ethernet MAC address being used by the Local
(LAN) port of the modem router.
IP Address
DHCP
This field displays the IP address being used by the Local (LAN) port of
the modem router. The default is 192.168.0.1.
If OFF, the modem router will not assign IP addresses to PCs on the
LAN.
If ON, the modem router will assign IP addresses to PCs on the LAN.
IP Subnet Mask
This field displays the IP Subnet Mask being used by the Local (LAN)
port of the modem router. The default is 255.255.255.0.
Modem
These parameters apply to the Local (WAN) port of the modem router.
The version of the firmware.
ADSL Firmware Version
Modem Status
The connection status of the modem.
6-6
Managing Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Table 6-1. Menu 3.2 - Modem Router Status Fields (continued)
Field
Downstream Speed
Description
The speed at which the modem is receiving data from the ADSL line.
The speed at which the modem is transmitting data to the ADSL line.
The Virtual Path Identifier setting.
Upstream Speed
VPI
VCI
The Virtual Channel Identifier setting.
Wireless Port
These are the settings as set in the Wireless Settings page; see
“Understanding Wireless Settings” in Chapter 3 for details.
Name (SSID)
Region
The Service Set ID, also known as the wireless network name.
The country where the unit is set up for use.
Channel
The current channel, which determines the operating frequency.
Wireless AP
Indicates if the Access Point feature is disabled or not. If not enabled, the
Wireless LED on the front panel will be off.
Broadcast Name
Indicates if the DG834GV is configured to broadcast its SSID.
Click the Show Statistics button to display modem router usage statistics, as shown below:
Figure 6-4
Managing Your Network
6-7
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
This screen shows the following statistics:
Table 6-2. Router Statistics Fields
Field
Description
WAN or LAN Port
Status
The statistics for the WAN (Internet) and LAN ports.
The link status of the port.
TxPkts
The number of packets transmitted on this port since reset or manual clear.
The number of packets received on this port since reset or manual clear.
The number of collisions on this port since reset or manual clear.
The current line utilization—percentage of current bandwidth used on this port.
The average line utilization for this port.
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
The time elapsed since the last power cycle or reset.
ADSL Link Downstream
or Upstream
The statistics for the upstream and downstream ADSL link. These statistics will
be of interest to your technical support representative if you are having
problems obtaining or maintaining a connection.
Connection Speed
Line Attenuation
Typically, the downstream speed is faster than the upstream speed.
The line attenuation will increase the further you are physically located from
your ISP’s facilities.
Noise Margin
Poll Interval
This is the signal-to-noise ratio and is a measure of the quality of the signal on
the line.
Specifies the interval at which the statistics are updated in this window. Click
Stop to freeze the display.
6-8
Managing Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Click the Connection Status button to display modem router connection status, shown below:
Figure 6-5
This screen shows the following statistics:
Table 6-3. Connection Status Fields for PPPoA
Field
Description
Connection Time
The time elapsed since the last connection to the Internet via the ADSL port.
The connection status.
Connecting to
Sender
Negotiation
ON or OFF
Authentication
IP Address
ON or OFF
The IP Address assigned to the WAN port by the ADSL Internet Service Provider.
The Network Mask assigned to the WAN port by the ADSL Internet Service Provider.
Network Mask
Managing Your Network
6-9
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Viewing Attached Devices
The Attached Devices menu contains a table of all IP devices that the modem router has
discovered on the local network. From the Main Menu of the browser interface, under the
Maintenance heading, select Attached Devices to view the table, shown:
Figure 6-6
For each device, the table shows the IP address, Device Name if available, and the Ethernet MAC
address. Note that if the modem router is rebooted, the table data is lost until the modem router
rediscovers the devices. To force the modem router to look for attached devices, click the Refresh
button.
Viewing, Selecting, and Saving Logged Information
The modem router will log security-related events such as denied incoming service requests,
hacker probes, and administrator logins. If you enabled content filtering in the Block Sites menu,
the Logs page can show you when someone on your network tries to access a blocked site. If you
enabled e-mail notification, you will receive these logs in an e-mail message. If you do not have e-
mail notification enabled, you can view the logs by clicking the Logs link in the Content Filtering
section of the main menu.
6-10
Managing Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
An example of the logs file is shown below.
Figure 6-7
Managing Your Network
6-11
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Table 6-4. Security Log entry descriptions
Field
Description
Date and Time
The date and time the log entry was recorded.
The type of event and what action was taken if any.
Description or
Action
Source IP
The IP address of the initiating device for this log entry.
Source port and
interface
The service port number of the initiating device, and whether it
originated from the LAN or WAN
Destination
The name or IP address of the destination device or Web site.
Destination port The service port number of the destination device, and whether
and interface it’s on the LAN or WAN.
Table 6-5. Security Log action buttons
Field
Description
Refresh
Clear Log
Send Log
Apply
Refresh the log screen.
Clear the log entries.
Email the log immediately.
Apply the current settings.
Clear the current settings.
Cancel
6-12
Managing Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Selecting What Information to Log
Besides the standard information listed above, you can choose to log additional information. Those
optional selections are as follows:
•
•
•
•
Attempted access to blocked site
Connections to the Web-based interface of the modem router
Modem Router operation (start up, get time, etc.)
Known DoS attacks and Port Scans
Saving Log Files on a Server
You can choose to write the logs to a computer running a syslog program. To activate this feature,
select to Broadcast on Lan or enter the IP address of the server where the Syslog file will be
written.
Examples of Log Messages
Following are examples of log messages. In all cases, the log entry shows the timestamp as: Day,
Year-Month-Date Hour:Minute:Second.
Activation and Administration
Tue, 2002-05-21 18:48:39 - NETGEAR activated
[This entry indicates a power-up or reboot with initial time entry.]
Tue, 2002-05-21 18:55:00 - Administrator login successful - IP:192.168.0.2
Thu, 2002-05-21 18:56:58 - Administrator logout - IP:192.168.0.2
[This entry shows an administrator logging in and out from IP address 192.168.0.2.]
Tue, 2002-05-21 19:00:06 - Login screen timed out - IP:192.168.0.2
[This entry shows a time-out of the administrator login.]
Wed, 2002-05-22 22:00:19 - Log emailed
[This entry shows when the log was emailed.]
Managing Your Network
6-13
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Dropped Packets
Wed, 2002-05-22 07:15:15 - TCP packet dropped - Source:64.12.47.28,4787,WAN -
Destination:134.177.0.11,21,LAN - [Inbound Default rule match]
Sun, 2002-05-22 12:50:33 - UDP packet dropped - Source:64.12.47.28,10714,WAN -
Destination:134.177.0.11,6970,LAN - [Inbound Default rule match]
Sun, 2002-05-22 21:02:53 - ICMP packet dropped - Source:64.12.47.28,0,WAN -
Destination:134.177.0.11,0,LAN - [Inbound Default rule match]
[These entries show an inbound FTP (port 21) packet, User Datagram Protocol (UDP) packet
(port 6970), and Internet Control Message Protocol (ICMP) packet (port 0) being dropped as a
result of the default inbound rule, which states that all inbound packets are denied.]
Enabling Security Event E-mail Notification
In order to receive logs and alerts by e-mail, you must provide your e-mail information in the E-
mail subheading:
Figure 6-8
6-14
Managing Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
•
•
Turn e-mail notification on. Select this check box if you want to receive e-mail logs and
alerts from the modem router.
Send alerts and logs via email.
— Send To This E-mail Address Enter the e-mail address where you want to send the alerts
and logs. Use a full e-mail address, such as ChrisXY@myISP.com.
— Outgoing Mail Server. Enter the name or IP address of the outgoing SMTP mail server of
your ISP (such as mail.myISP.com).
— Check My Mail Server requires authentication if you need to login to your SMTP
server to send E-mail. If you check this box, you must enter the user name and password
for the mail server.
Tip: If you cannot remember the above information from when you set up your
e-mail account, check the settings in your e-mail program.
•
•
Send alert immediately. Select the corresponding check box if you would like immediate
notification of a significant security event, such as a known attack, port scan, or attempted
access to a blocked site.
Send logs according to this schedule. Specifies how often to send the logs: Hourly, Daily,
Weekly, or When Full.
–
Day for sending log
Specifies which day of the week to send the log. Relevant when the log is sent weekly or
daily.
–
Time for sending log
Specifies the time of day to send the log. Relevant when the log is sent daily or weekly.
If the Weekly, Daily or Hourly option is selected and the log fills up before the specified
period, the log is automatically e-mailed to the specified e-mail address. After the log is sent, it
is cleared from the modem router’s memory. If the modem router cannot e-mail the log file,
the log buffer may fill up. In this case, the modem router overwrites the log and discards its
contents.
Managing Your Network
6-15
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Running Diagnostic Utilities and Rebooting the Modem
Router
The Integrated ADSL Modem Wireless Router with Voice has a diagnostics feature. You can use
the diagnostics menu to perform the following functions from the modem router:
•
•
Ping an IP Address to test connectivity to see if you can reach a remote host.
Perform a DNS Lookup to test if an Internet name resolves to an IP address to verify that the
DNS server configuration is working.
•
•
Display the Routing Table to identify what other modem routers the modem router is
communicating with.
Reboot the modem router to enable new network configurations to take effect or to clear
problems with the modem router’s network connection.
From the Main Menu of the browser interface, under the Maintenance heading, select the
Diagnostics heading to display the menu shown.
Figure 6-9
6-16
Managing Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Enabling Remote Management
Using the Remote Management page, you can allow a user or users on the Internet to configure,
upgrade and check the status of your Integrated ADSL Modem and Wireless Router with Voice,
Model DG834GV.
Tip: Be sure to change the modem router's default password to a very secure password.
The ideal password should contain no dictionary words from any language, and
should be a mixture of letters (both upper and lower case), numbers, and symbols.
Your password can be up to 30 characters.
Configuring Remote Management
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
User Name of admin, default password of password, or using whatever User Name,
Password and LAN address you have chosen for the modem router.
2. From the Advanced section of the main menu, select the Remote Management link.
Figure 6-10
3. Select the Turn Remote Management On check box.
Managing Your Network
6-17
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
4. Specify what external addresses will be allowed to access the modem router’s remote
management.
For security, restrict access to as few external IP addresses as practical:
•
•
To allow access from any IP address on the Internet, select Everyone.
To allow access from a range of IP addresses on the Internet, select IP address range.
Enter a beginning and ending IP address to define the allowed range.
•
To allow access from a single IP address on the Internet, select Only this Computer.
Enter the IP address that will be allowed access.
5. Specify the Port Number that will be used for accessing the management interface.
Web browser access normally uses the standard HTTP service port 80. For greater security,
you can change the remote management Web interface to a custom port by entering that
number in the box provided. Choose a number between 1024 and 65535, but do not use the
number of any common service port. The default is 8080, which is a common alternate for
HTTP.
6. Click Apply to have your changes take effect.
When accessing your modem router from the Internet, you will type your modem router's
WAN IP address in your browser's Address (in IE) or Location (in Netscape) box, followed by
a colon (:) and the custom port number. For example, if your external address is 134.177.0.123
and you use port number 8080, enter in your browser:
http://134.177.0.123:8080
Note: In this case, the http:// must be included in the address.
6-18
Managing Your Network
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
Advanced Configuration
This chapter describes how to configure the advanced features of your Integrated ADSL Modem
and Wireless Router with Voice, Model DG834GV.
Configuring Advanced Security
The Integrated ADSL Modem and Wireless Router with Voice, Model DG834GV provides a
variety of advanced features, such as:
•
•
•
•
•
•
•
•
•
Setting up a Demilitarized Zone (DMZ) Server
Connecting Automatically, as Required
Disabling Port Scan and DOS Protection
Responding to a Ping on the Internet WAN Port
MTU Size
Flexibility on configuring your LAN TCP/IP settings
Using the Router as a DHCP Server
Configuring Dynamic DNS
Configuring Static Routes
These features are discussed below.
Advanced Configuration
7-1
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Setting Up A Default DMZ Server
The Default DMZ Server feature is helpful when using some online games and videoconferencing
applications that are incompatible with NAT. The modem router is programmed to recognize some
of these applications and to work properly with them, but there are other applications that may not
function well. In some cases, one local computer can run the application properly if that
computer’s IP address is entered as the Default DMZ Server.
Warning: For security reasons, you should avoid using the Default DMZ Server feature.
When a computer is designated as the Default DMZ Server, it loses much of
the protection of the firewall, and is exposed to many exploits from the
Internet. If compromised, the computer can be used to attack your network.
Incoming traffic from the Internet is normally discarded by the modem router unless the traffic is a
response to one of your local computers or a service that you have configured in the Ports menu.
Instead of discarding this traffic, you can have it forwarded to one computer on your network. This
computer is called the Default DMZ Server.
How to Configure a Default DMZ Server
To assign a computer or server to be a Default DMZ server, follow these steps:
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
User Name of admin, default password of password, or using whatever Password and LAN
address you have chosen for the modem router.
7-2
Advanced Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
2. From the Main Menu, under Advanced, click the WAN Setup link to view the page shown:
Figure 7-1
3. Select the Default DMZ Server check box.
4. Type the IP address for that server.
5. Click Apply to save your changes.
Connect Automatically, as Required
Normally, this option should be enabled, so that an Internet connection will be made automatically,
whenever Internet-bound traffic is detected. If this causes high connection costs, you can disable
this setting.
If disabled, you must connect manually, using the sub-screen accessed from the "Connection
Status" button on the Status screen.
If you have an "Always on" connection, this setting has no effect.
Disable Port Scan and DOS Protection
The Firewall protects your LAN against Port Scans and Denial of Service (DOS) attacks. This
should be disabled only in special circumstances.
Advanced Configuration
7-3
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Respond to Ping on Internet WAN Port
If you want the modem router to respond to a 'ping' from the Internet, select the Respond to Ping
on Internet WAN Port check box. This should only be used as a diagnostic tool, since it allows
your modem router to be discovered. Do not select this box unless you have a specific reason to do
so.
MTU Size
The normal MTU (Maximum Transmit Unit) value for most Ethernet networks is 1500 Bytes, or
1492 Bytes for PPPoE connections. For some ISPs you may need to reduce the MTU. But this is
rarely required, and should not be done unless you are sure it is necessary for your ISP connection.
Configuring LAN IP Settings
The LAN IP Setup menu allows configuration of LAN IP services such as DHCP and RIP. These
features can be found under the Advanced heading in the Main Menu of the browser interface.
The modem router is shipped preconfigured to use private IP addresses on the LAN side, and to act
as a DHCP server. The modem router’s default LAN IP configuration is:
•
•
LAN IP addresses—192.168.0.1
Subnet mask—255.255.255.0
7-4
Advanced Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
These addresses are part of the Internet Engineering Task Force (IETF)-designated private address
range for use in private networks, and should be suitable in most applications. If your network has
a requirement to use a different IP addressing scheme, you can make those changes in this menu.
Figure 7-2
The LAN TCP/IP Setup parameters are:
•
IP Address
This is the LAN IP address of the modem router.
Warning: If you change the LAN IP address of the modem router while connected
through the browser, you or anyone else using the router will be
disconnected. You must then open a new connection to the new IP
address and log in again. Others using the router will have to restart their
computer and connect to the router again.
•
IP Subnet Mask
This is the LAN Subnet Mask of the modem router. Combined with the IP address, the IP
Subnet Mask allows a device to know which other addresses are local to it, and which must be
reached through a gateway or modem router.
Advanced Configuration
7-5
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
•
RIP Direction
RIP (Router Information Protocol) allows a modem router to exchange routing information
with other routers. The RIP Direction selection controls how the Modem Router sends and
receives RIP packets. Both is the default.
— When set to Both or Out Only, the modem router will broadcast its routing table
periodically.
— When set to Both or In Only, it will incorporate the RIP information that it receives.
— When set to None, it will not send any RIP packets and will ignore any RIP packets
received.
•
RIP Version
This controls the format and the broadcasting method of the RIP packets that the modem
router sends. It recognizes both formats when receiving. By default, this is set for RIP-1.
— RIP-1 is universally supported. RIP-1 is probably adequate for most networks, unless you
have an unusual network setup.
— RIP-2 carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2
format.
–
–
RIP-2B uses subnet broadcasting.
RIP-2M uses multicasting.
DHCP
By default, the modem router will function as a DHCP (Dynamic Host Configuration Protocol)
server, allowing it to assign IP, DNS server, and default gateway addresses to all computers
connected to the modem router's LAN. The assigned default gateway address is the LAN address
of the router. IP addresses will be assigned to the attached PCs from a pool of addresses specified
in this menu. Each pool address is tested before it is assigned to avoid duplicate addresses on the
LAN.
For most applications, the default DHCP and TCP/IP settings of the router are satisfactory. See
“Internet Networking and TCP/IP Addressing” in Appendix B for an explanation of DHCP and
information about how to assign IP addresses for your network.
Use Router as DHCP server
If another device on your network will be the DHCP server, or if you will manually configure the
network settings of all of your computers, clear the ‘Use router as DHCP server’ check box.
Otherwise, leave it selected.
7-6
Advanced Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Specify the pool of IP addresses to be assigned by setting the Starting IP Address and Ending IP
Address. These addresses should be part of the same IP address subnet as the router’s LAN IP
address. Using the default addressing scheme, you should define a range between 192.168.0.2 and
192.168.0.254, although you may want to save part of the range for devices with fixed addresses.
The router will deliver the following parameters to any LAN device that requests DHCP:
•
•
•
•
An IP Address from the range you have defined
Subnet Mask
Gateway IP Address is the router’s LAN IP address
Primary DNS Server, if you entered a Primary DNS address in the Basic Settings menu;
otherwise, the router’s LAN IP address
•
•
Secondary DNS Server, if you entered a Secondary DNS address in the Basic Settings menu
WINS Server, short for Windows Internet Naming Service Server, determines the IP address
associated with a particular Windows computer. A WINS server records and reports a list of
names and IP address of Windows PCs on its local network. If you connect to a remote
network that contains a WINS server, enter the server’s IP address here. This allows your PCs
to browse the network using the Network Neighborhood feature of Windows.
Advanced Configuration
7-7
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Reserved IP addresses
When you specify a reserved IP address for a computer on the LAN, that computer will always
receive the same IP address each time it access the router’s DHCP server. Reserved IP addresses
should be assigned to servers that require permanent IP settings.
To reserve an IP address:
1. Click the Add button.
Figure 7-3
2. In the IP Address box, type the IP address to assign to the computer or server.
Choose an IP address from the router’s LAN subnet, such as 192.168.0.x.
3. Type the MAC Address of the computer or server.
Tip: If the computer is already present on your network, you can copy its MAC
address from the Attached Devices menu and paste it here.
4. Click Apply to enter the reserved address into the table.
Note: The reserved address will not be assigned until the next time the computer
contacts the router's DHCP server. Reboot the computer or access its IP
configuration and force a DHCP release and renew.
7-8
Advanced Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
To edit or delete a reserved address entry:
1. Click the button next to the reserved address you want to edit or delete.
2. Click Edit or Delete.
How to Configure LAN TCP/IP Settings
1. Log in to the router at its default LAN address of http://192.168.0.1 with its default User Name
of admin, default password of password, or using whatever User Name, Password and LAN
address you have chosen for the router.
2. From the Main Menu, under Advanced, click the LAN IP Setup link to view the menu,
shown:
Figure 7-4
3. Enter the TCP/IP, DHCP, or Reserved IP parameters.
4. Click Apply to save your changes.
Advanced Configuration
7-9
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Configuring Dynamic DNS
If your network has a permanently assigned IP address, you can register a domain name and have
that name linked with your IP address by public Domain Name Servers (DNS). However, if your
Internet account uses a dynamically assigned IP address, you will not know in advance what your
IP address will be, and the address can change frequently. In this case, you can use a commercial
dynamic DNS service that will allow you to register your domain to their IP address, and will
forward traffic directed at your domain to your frequently-changing IP address.
The router contains a client that can connect to a dynamic DNS service provider. To use this
feature, you must select a service provider and obtain an account with them. After you have
configured your account information in the router, whenever your ISP-assigned IP address
changes, your router will automatically contact your dynamic DNS service provider, log in to your
account, and register your new IP address.
How to Configure Dynamic DNS
Warning: If your ISP assigns a private WAN IP address such as 192.168.x.x or 10.x.x.x,
the dynamic DNS service will not work because private addresses will not be
routed on the Internet.
1. Log in to the router at its default LAN address of http://192.168.0.1 with its default User Name
of admin, default password of password, or using whatever User Name, Password and LAN
address you have chosen for the router.
7-10
Advanced Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
2. From the Main Menu of the browser interface, under Advanced, select Dynamic DNS to
display the page below.
Figure 7-5
3. Access the Web site of one of the dynamic DNS service providers whose names appear in the
‘Service Provider’ box, and register for an account.
For example, for dyndns.org, go to www.dyndns.org.
4. Select the Use a dynamic DNS service check box.
5. Select the name of your dynamic DNS Service Provider.
6. Type the Host Name that your dynamic DNS service provider gave you.
The dynamic DNS service provider may call this the domain name. If your URL is
myName.dyndns.org, then your Host Name is “myName.”
7. Type the User Name for your dynamic DNS account.
8. Type the Password (or key) for your dynamic DNS account.
9. If your dynamic DNS provider allows the use of wildcards in resolving your URL, you can
select the Use wildcards check box to activate this feature.
For example, the wildcard feature will cause *.yourhost.dyndns.org to be aliased to the same
IP address as yourhost.dyndns.org
10. Click Apply to save your configuration.
Advanced Configuration
7-11
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Using Static Routes
Static Routes provide additional routing information to your router. Under normal circumstances,
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
Static Route Example
As an example of when a static route is needed, consider the following case:
•
•
Your primary Internet access is through a cable modem to an ISP.
You have an ISDN router on your home network for connecting to the company where you are
employed. This router’s address on your LAN is 192.168.0.100.
•
Your company’s network is 134.177.0.0.
When you first configured your router, two implicit static routes were created. A default route was
created with your ISP as the modem router, and a second static route was created to your local
network for all 192.168.0.x addresses. With this configuration, if you attempt to access a device on
the 134.177.0.0 network, your router will forward your request to the ISP. The ISP forwards your
request to the company where you are employed, and the request will likely be denied by the
company’s firewall.
In this case you must define a static route, telling your router that 134.177.0.0 should be accessed
In this example:
•
•
•
The Destination IP Address and IP Subnet Mask fields specify that this static route applies to
all 134.177.x.x addresses.
The Modem Router IP Address fields specifies that all traffic for these addresses should be
forwarded to the ISDN router at 192.168.0.100.
A Metric value of 1 will work since the ISDN router is on the LAN.
This represents the number of routers between your network and the destination. This is a
direct connection so it is set to 1.
•
Private is selected only as a precautionary security measure in case RIP is activated.
7-12
Advanced Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
How to Configure Static Routes
1. Log in to the router at its default LAN address of http://192.168.0.1 with its default User Name
of admin, default password of password, or using whatever User Name, Password and LAN
address you have chosen for the router.
2. From the Main Menu of the browser interface, under Advanced, click Static Routes to view
Figure 7-6
3. To add or edit a Static Route:
Figure 7-7
b. Type a route name for this static route in the Route Name box under the table.
This is for identification purpose only.
c. Select Private if you want to limit access to the LAN only.
The static route will not be reported in RIP.
d. Select Active to make this route effective.
Advanced Configuration
7-13
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
e. Type the Destination IP Address of the final destination.
f. Type the IP Subnet Mask for this destination.
If the destination is a single host, type 255.255.255.255.
g. Type the Gateway IP Address, which must be a router on the same LAN segment as the
router.
h. Type a number between 1 and 15 as the Metric value.
This represents the number of routers between your network and the destination. Usually,
a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
4. Click Apply to have the static route entered into the table.
Universal Plug and Play (UPnP)
Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, access
the network and connect to other devices as needed. UPnP devices can automatically discover the
services from other registered UPnP devices on the network.
1. Click UPnP on the main menu to invoke the UPnP menu:
Figure 7-8
2. Fill out the UPnP screen:
•
Turn UPnP On: UPnP can be enabled or disabled for automatic device configuration. The
default setting for UPnP is enabled. If disabled, the Router will not allow any device to
automatically control the resources, such as port forwarding (mapping), of the Router.
7-14
Advanced Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
•
•
Advertisement Period: The Advertisement Period is how often the Router will advertise
(broadcast) its UPnP information. This value can range from 1 to 1440 minutes. The
default period is for 30 minutes. Shorter durations will ensure that control points have
current device status at the expense of additional network traffic. Longer durations may
compromise the freshness of the device status but can significantly reduce network traffic.
Advertisement Time To Live: The time to live for the advertisement is measured in hops
(steps) for each UPnP packet sent. A hop is the number of steps allowed to propagate for
each UPnP advertisement before it disappears. The number of hops can range from 1 to
255. The default value for the advertisement time to live is 4 hops, which should be fine
for most home networks. If you notice that some devices are not being updated or reached
correctly, then it may be necessary to increase this value a little.
•
UPnP Portmap Table: The UPnP Portmap Table displays the IP address of each UPnP
device that is currently accessing the Router and which ports (Internal and External) that
device has opened. The UPnP Portmap Table also displays what type of port is opened and
if that port is still active for each IP address.
3. To save, cancel or refresh the table:
a. Click Apply to save the new settings to the Router.
b. Click Cancel to disregard any unsaved changes.
c. Click Refresh to update the portmap table and to show the active ports that are currently
opened by UPnP devices.
Advanced Configuration
7-15
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
7-16
Advanced Configuration
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
Troubleshooting
This chapter gives information about troubleshooting your Integrated ADSL Modem and Wireless
Router with Voice, Model DG834GV. After each problem description, instructions are provided to
help you diagnose and solve the problem. For the common problems listed, go to the section
indicated.
•
•
Is the router on?
Have I connected the router correctly?
•
•
•
•
I can’t access the router’s configuration with my browser.
I’ve configured the router but I can’t access the Internet.
I can’t remember the router’s configuration password.
I want to clear the configuration and start over again.
Basic Functioning
After you turn on power to the router, the following sequence of events should occur:
on page 2-8 for an illustration and explanation of the LEDs).
2. Verify that the Test LED lights within a few seconds, indicating that the self-test procedure is
running.
3. After approximately 10 seconds, verify that:
a. The Test LED is not lit.
Troubleshooting
8-1
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
b. The LAN port LEDs are lit for any local ports that are connected.
c. The WAN port LED is lit.
If a port’s LED is lit, a link has been established to the connected device. If a LAN port is
connected to a 100 Mbps device, verify that the port’s LED is green. If the port is 10 Mbps, the
LED will be amber.
If any of these conditions does not occur, refer to the appropriate following section.
Power LED Not On
If the Power and other LEDs are off when your router is turned on:
•
Make sure that the power cord is properly connected to your router and that the power supply
adapter is properly connected to a functioning power outlet.
•
Check that you are using the 12 V DC power adapter supplied by NETGEAR for this product.
If the error persists, you have a hardware problem and should contact technical support.
Test LED Never Turns On or Test LED Stays On
When the router is turned on, the Test LED turns on for about 10 seconds and then turns off. If the
Test LED does not turn on, or if it stays on, there is a fault within the router.
If you experience problems with the Test LED:
•
Cycle the power to see if the router recovers and the LED blinks for the correct amount of
time.
If all LEDs including the Test LED are still on one minute after power up:
•
•
Cycle the power to see if the router recovers.
Clear the router’s configuration to factory defaults. This will set the router’s IP address to
If the error persists, you might have a hardware problem and should contact technical support.
8-2
Troubleshooting
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
LAN or Internet Port LEDs Not On
If either the LAN LEDs or Internet LED do not light when the Ethernet connection is made, check
the following:
•
Make sure that the Ethernet cable connections are secure at the router and at the hub or
workstation.
•
•
Make sure that power is turned on to the connected hub or workstation.
Be sure you are using the correct cable:
— When connecting the router’s WAN ADSL port, use the cable that was supplied with the
DG834GV.
Troubleshooting the Web Configuration Interface
If you are unable to access the router’s Web Configuration interface from a computer on your local
network, check the following:
•
If you are using an Ethernet-connected computer, check the Ethernet connection between the
computer and the router as described in the previous section.
•
Make sure your computer’s IP address is on the same subnet as the router. If you are using the
recommended addressing scheme, your computer’s address should be in the range of
192.168.0.2 to 192.168.0.254. Refer to “Preparing a Computer for Network Access” in
Appendix B to find your computer’s IP address.
Note: If your computer’s IP address is shown as 169.254.x.x:
Recent versions of Windows and MacOS will generate and assign an IP
address if the computer cannot reach a DHCP server. These auto-generated
addresses are in the range of 169.254.x.x. If your IP address is in this range,
check the connection from the computer to the router and reboot your
computer.
•
•
If your router’s IP address was changed and you do not know the current IP address, clear the
router’s configuration to factory defaults. This will set the router’s IP address to 192.168.0.1.
Make sure your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet
Explorer, click Refresh to be sure the Java applet is loaded.
Troubleshooting
8-3
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
•
•
Try quitting the browser and launching it again.
Make sure you are using the correct login information. The factory default login name is
admin and the password is password. Make sure that CAPS LOCK is off when entering this
information.
If the router does not save changes you have made in the Web Configuration Interface, check the
following:
•
When entering configuration settings, be sure to click the Apply button before moving to
another menu or tab, or your changes are lost.
•
Click the Refresh or Reload button in the Web browser. The changes may have occurred, but
the Web browser may be caching the old configuration.
Troubleshooting the ISP Connection
If your router is unable to access the Internet, you should check the ADSL connection, then the
WAN TCP/IP connection.
ADSL link
If your router is unable to access the Internet, you should first determine whether you have an
ADSL link with the service provider. The state of this connection is indicated with the Internet
LED.
Internet LED Green or Blinking Green
If your Internet LED is green or blinking green, then you have a good ADSL connection. You can
be confident that the service provider has connected your line correctly and that your wiring is
correct.
Internet LED Blinking Amber
If your Internet LED is blinking amber, then your modem router is attempting to make an ADSL
connection with the service provider. The LED should turn green within several minutes.
If the Internet LED does not turn green, disconnect all telephones on the line. If this solves the
problem, reconnect the telephones one at a time, being careful to use a microfilter on each
telephone. If the microfilters are connected correctly, you should be able to connect all your
telephones.
8-4
Troubleshooting
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
If disconnecting telephones does not result in a green Internet LED, there may be a problem with
your wiring. If the telephone company has tested the ADSL signal at your Network Interface
Device (NID), then you may have poor quality wiring in your house.
Internet LED Off
If the Internet LED is off, disconnect all telephones on the line. If this solves the problem,
reconnect the telephones one at a time, being careful to use a microfilter on each telephone. If the
microfilters are connected correctly, you should be able to connect all your telephones.
If disconnecting telephones does not result in a green Internet LED the problem may be one of the
following:
•
•
Check that the telephone company has made the connection to your line and tested it.
Verify that you are connected to the correct telephone line. If you have more than one phone
line, be sure that you are connected to the line with the ADSL service. It may be necessary to
use a swapper if you ADSL signal is on pins 1 and 4 or the RJ-11 jack. The Integrated ADSL
Modem Wireless Router with Voice uses pins 2 and 3.
Obtaining a WAN IP Address
If your modem router is unable to access the internet, and your Internet LED is green or blinking
green, you should determine whether the modem router is able to obtain a WAN IP address from
the ISP. Unless you have been assigned a static IP address, your modem router must request an IP
address from the ISP. You can determine whether the request was successful using the browser
interface.
To check the WAN IP address from the browser interface:
1. Launch your browser and select an external site such as www.netgear.com.
2. Access the Main Menu of the modem router’s configuration at http://192.168.0.1.
3. Under the Maintenance heading check that an IP address is shown for the WAN Port.
If 0.0.0.0 is shown, your modem router has not obtained an IP address from your ISP.
If your router is unable to obtain an IP address from the ISP, the problem may be one of the
following:
•
Your ISP may require a Multiplexing Method or Virtual Path Identifier/Virtual Channel
Identifier parameter.
Verify with your ISP the Multiplexing Method and parameter value, and update the router’s
ADSL Settings accordingly.
Troubleshooting
8-5
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
•
Your ISP may require a login program.
Ask your ISP whether they require PPP over Ethernet (PPPoE) or PPP over ATM (PPPOA)
login.
•
•
If you have selected a login program, you may have incorrectly set the Service Name, User
Your ISP may check for your computer's host name.
Assign the computer Host Name of your ISP account to the modem router in the browser-
based Setup Wizard.
•
Your ISP only allows one Ethernet MAC address to connect to Internet, and may check for
your computer’s MAC address. In this case:
Inform your ISP that you have bought a new network device, and ask them to use the router’s
MAC address.
OR
Configure your router to spoof your computer’s MAC address. This can be done in the Basic
Settings menu. Refer to the Integrated ADSL Modem and Wirelesss Router Setup Manual.
Troubleshooting PPPoE or PPPoA
The PPPoA or PPPoA connection can be debugged as follows:
1. Access the Main Menu of the router at http://192.168.0.1.
2. Under the Maintenance heading, select the Router Status link.
3. Click the Connection Status button.
4. If all of the steps indicate “OK” then your PPPoE or PPPoA connection is up and working.
5. If any of the steps indicates “Failed”, you can attempt to reconnect by clicking Connect. The
modem router will continue to attempt to connect indefinitely.
If you cannot connect after several minutes, you may be using an incorrect Service Name, User
Name or Password. There also may be a provisioning problem with your ISP.
Note: Unless you connect manually, the modem router will not authenticate using
PPPoE or PPPoA until data is transmitted to the network.
8-6
Troubleshooting
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
Troubleshooting Internet Browsing
If your modem router can obtain an IP address but your computer is unable to load any Web pages
from the Internet:
•
Your computer may not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www addresses)
to numeric IP addresses. Typically your ISP will provide the addresses of one or two DNS
servers for your use. If you entered a DNS address during the modem router’s configuration,
reboot your computer and verify the DNS address as described in “Preparing a Computer for
Network Access” in Appendix B. Alternatively, you can configure your computer manually
with DNS addresses, as explained in your operating system documentation.
•
Your computer may not have the modem router configured as its TCP/IP modem router.
If your computer obtains its information from the modem router by DHCP, reboot the
computer and verify the modem router address as described in “Preparing a Computer for
Troubleshooting a TCP/IP Network Using the Ping Utility
Most TCP/IP terminal devices and routers contain a ping utility that sends an echo request packet
to the designated device. The device then responds with an echo reply. Troubleshooting a TCP/IP
network is made very easy by using the ping utility in your computer.
Testing the LAN Path to Your Router
You can ping the router from your computer to verify that the LAN path to your router is set up
correctly.
To ping the router from a PC running Windows 95 or later:
1. From the Windows toolbar, click the Start button and select Run.
2. In the field provided, type Ping followed by the IP address of the router, as in this example:
ping 192.168.0.1
3. Click OK.
You should see a message like this one:
Pinging <IP address> with 32 bytes of data
Troubleshooting
8-7
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
If the path is working, you see this message:
Reply from < IP address >: bytes=32 time=NN ms TTL=xxx
If the path is not working, you see this message:
Request timed out
If the path is not functioning correctly, you could have one of the following problems:
•
Wrong physical connections
— Check that the corresponding Link LEDs are on for your network interface card and
for the hub ports (if any) that are connected to your workstation and router.
•
Wrong network configuration
— Verify that the Ethernet card driver software and TCP/IP software are both installed
and configured on your PC or workstation.
— Verify that the IP address for your router and your workstation are correct and that the
addresses are on the same subnet.
Testing the Path from Your Computer to a Remote Device
After verifying that the LAN path works correctly, test the path from your PC to a remote device.
From the Windows run menu, type:
PING -n 10 <IP address>
where <IP address> is the IP address of a remote device such as your ISP’s DNS server.
If the path is functioning correctly, replies as in the previous section are displayed. If you do not
receive replies:
— Check that your PC has the IP address of your router listed as the default modem router. If
the IP configuration of your PC is assigned by DHCP, this information will not be visible
in your PC’s Network Control Panel. Verify that the IP address of the router is listed as the
default modem router as described in “Preparing a Computer for Network Access” in
— Check to see that the network address of your PC (the portion of the IP address specified
by the netmask) is different from the network address of the remote device.
— Check that your cable or DSL modem is connected and functioning.
8-8
Troubleshooting
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
— If your ISP assigned a host name to your PC, enter that host name as the Account Name in
the Basic Settings menu.
— Your ISP could be rejecting the Ethernet MAC addresses of all but one of your PCs. Many
broadband ISPs restrict access by only allowing traffic from the MAC address of your
broadband modem, but some ISPs additionally restrict access to the MAC address of a
single PC connected to that modem. If this is the case, you must configure your router to
“clone” or “spoof” the MAC address from the authorized PC. Refer to your Integrated
ADSL Modem and Wirelesss Router Setup Manual.
Restoring the Default Configuration and Password
This section explains how to restore the factory default configuration settings, changing the
router’s administration password to password and the IP address to 192.168.0.1. You can erase the
current configuration and restore factory defaults in two ways:
•
Use the Erase function of the Web Configuration Manager (see “Backing Up, Restoring, or
•
Use the Default Reset button on the rear panel of the router. Use this method for cases when
the administration password or IP address is not known.
Using the Reset button
To restore the factory default configuration settings without knowing the administration password
or IP address, you must use the Default Reset button on the rear panel of the router.
1. Press and hold the Default Reset button until the Test LED turns on (about 10 seconds).
2. Release the Default Reset button and wait for the router to reboot.
Problems with Date and Time
The E-mail menu in the Content Filtering section displays the current date and time of day. The
Integrated ADSL Modem Wireless Router with Voice uses the Network Time Protocol (NTP) to
obtain the current time from one of several Network Time Servers on the Internet. Each entry in
the log is stamped with the date and time of day. Problems with the date and time function can
include:
Troubleshooting
8-9
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
•
Date shown is January 1, 2000
Cause: The router has not yet successfully reached a Network Time Server. Check that your
Internet access settings are configured correctly. If you have just completed configuring the
router, wait at least five minutes and check the date and time again.
•
Time is off by one hour
Cause: The router does not automatically sense Daylight Savings Time. In the E-mail menu,
check or uncheck the box marked “Adjust for Daylight Savings Time”.
8-10
Troubleshooting
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Technical Specifications
This appendix provides technical specifications for the Integrated ADSL Modem and Wireless
Router with Voice, Model DG834GV.
Network Protocol and Standards Compatibility
Data and Routing Protocols:
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE or PPPoA, RFC 1483 Bridged or
Routed Ethernet, and RFC 1577 Classical IP over ATM
Power Adapter
North America:
United Kingdom, Australia:
Europe:
120V, 60 Hz, input
240V, 50 Hz, input
230V, 50 Hz, input
100V, 50/60 Hz, input
12 V AC @ 1.0A output
Japan:
All regions (output):
Physical Specifications
Dimensions:
6.9" x 4.7" x 1.1"
175 mm x 119 mm x 28 mm
Weight:
0.7 lbs.
0.3 kg
Environmental Specifications
Operating temperature:
Operating humidity:
0° to 40° C (32º to 104º F)
90% maximum relative humidity, noncondensing
Electromagnetic Emissions
Meets requirements of:
Interface Specifications
LAN:
FCC Part 15 Class B; VCCI Class B; EN 55 022 (CISPR 22), Class B
10BASE-T or 100BASE-Tx, RJ-45
WAN:
ADSL, Dual RJ-11, pins 2 and 3,T1.413, G.DMT, G.Lite, ITU Annex A (for
the DG834G) or ITU Annex B (for the DG834GB)
Technical Specifications
A-1
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
A-2
Technical Specifications
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
Related Documents
This appendix provides links to reference documents you can use to gain a more complete
understanding of the technologies used in your NETGEAR product.
Document
Link
Internet Networking and TCP/IP
Addressing
Wireless Communications
Preparing a Computer for
Network Access
Virtual Private Networking (VPN)
Glossary
Related Documents
B-1
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model
B-2
Related Documents
v1.0, September 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
|