Portable Projector
VT800
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
Safety Cautions
Precautions
Please read this manual carefully before using your NEC VT800 projector and keep the manual handy for future
reference.
CAUTION
To turn off main power, be sure to remove the plug from power outlet.
The power outlet socket should be installed as near to the equipment as possible, and should be easily
accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET.
THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical
shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.
This symbol alerts the user that important information concerning the operation and maintenance of this
unit has been provided.
The information should be read carefully to avoid problems.
WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THE
PRONGS CAN BE FULLY INSERTED.
DOC Compliance Notice (for Canada only)
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Acoustic Noise Information Ordinance-3. GSGV (for Germany only):
The sound pressure level is less than 70 dB (A) according to ISO 3744 or ISO 7779.
CAUTION
Avoid displaying stationary images for a prolonged period of time.
Doing so can result in these images being temporarily sustained on the surface of the LCD panel.
If this should happen, continue to use your projector. The static background from previous images will
disappear.
WARNING TO CALIFORNIA RESIDENTS:
Handling the cables supplied with this product will expose you to lead, a chemical known to the State of Califor-
nia to cause birth defects or other reproductive harm. Wash hands after handling.
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
Disposing of your used product
EU-wide legislation as implemented in each Member State requires that used electrical and electronic
products carrying the mark (left) must be disposed of separately from normal household waste. This in-
cludes projectors and their electrical accessories or lamps. When you dispose of such products, please
follow the guidance of your local authority and/or ask the shop where you purchased the product.
After collecting the used products, they are reused and recycled in a proper way. This effort will help us
reduce the wastes as well as the negative impact such as mercury contained in a lamp to the human
health and the environment at the minimum level.
The mark on the electrical and electronic products only applies to the current European Union Member
States.
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
RF Interference (for USA only)
WARNING
The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT
those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government
regulation could void your right to operate this equipment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
For UK only: In UK, a BS approved power cable with moulded plug has a Black (five Amps) fuse installed for use
with this equipment. If a power cable is not supplied with this equipment please contact your supplier.
Important Safeguards
These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read
them carefully and heed all warnings.
Installation
• Do not place the projector in the following conditions:
- on an unstable cart, stand, or table.
- near water, baths or damp rooms.
- in direct sunlight, near heaters or heat radiating appliances.
- in a dusty, smoky or steamy environment.
- on a sheet of paper or cloth, rugs or carpets.
• If you wish to have the projector installed on the ceiling:
- Do not attempt to install the projector yourself.
- The projector must be installed by qualified technicians in order to ensure proper operation and reduce the
risk of bodily injury.
- In addition, the ceiling must be strong enough to support the projector and the installation must be in accor-
dance with any local building codes.
- Please consult your dealer for more information.
Place the projector in a horizontal position
The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other
than the desktop and ceiling mount, otherwise lamp life could decrease dramatically.
10˚
ꢀꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
Fire and Shock Precautions
• Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside
your projector. Allow at least 4 inches (10cm) of space between your projector and a wall.
• Do not try to touch the ventilation outlet as it can become heated while the projector is turned on.
• Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to
retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or screw-
driver into your project. If something should fall into your projector, disconnect it immediately and have the object
removed by a qualified service personnel.
• Do not place any objects on top of the projector.
• Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.
• The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply
fits this requirement before attempting to use your projector.
• Do not look into the lens while the projector is on. Serious damage to your eyes could result.
• Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the
lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause
unpredictable outcome such as fire or injury to the eyes.
• Do not cover the lens with the black lens cap or equivalent while the projector is on. Doing so can lead to melting
of the cap and possibly burning your hands due to the heat emitted from the light output.
• Do not place any objects, which are easily affected by heat, in front of the projector lens or a projector exhaust
vent.
Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the light
output and exhaust.
• Handle the power cable carefully. A damaged or frayed power cable can cause electric shock or fire.
- Do not use any power cables than the supplied one.
- Do not bend or tug the power cable excessively.
- Do not place the power cable under the projector, or any heavy object.
- Do not cover the power cable with other soft materials such as rugs.
- Do not heat the power cable.
- Do not handle the power plug with wet hands.
• Turn off the projector, unplug the power cable and have the projector serviced by a qualified service personnel
under the following conditions:
- When the power cable or plug is damaged or frayed.
- If liquid has been spilled into the projector, or if it has been exposed to rain or water.
- If the projector does not operate normally when you follow the instructions described in this user’s manual.
- If the projector has been dropped or the cabinet has been damaged.
- If the projector exhibits a distinct change in performance, indicating a need for service.
• Disconnect the power cable and any other cables before carrying the projector
• Turn off the projector and unplug the power cable before cleaning the cabinet or replacing the lamp.
• Turn off the projector and unplug the power cable if the projector is not to be used for an extended period of time.
• When using a LAN cable:
For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage.
ꢀv
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
CAUTION
• Do not use the tilt-foot for purposes other than originally intended. Misuses such as using the tilt foot to carry
or hang (from the wall or ceiling) the projector can cause damage to the projector.
• Do not send the projector in a soft case by parcel delivery service or cargo shipment. The projector inside the
soft case could be damaged.
• Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select
[SETUP - OPTIONS]
[FAN MODE]
[HIGH].)
→
→
• Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing so
can cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch
and a breaker.
• The projector can be unplugged during its cool down period after it is turned off.
Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated
while the projector is turned on and immediately after the projector is turned off.
• Do not turn off the AC power for 60 seconds after the lamp is turned on and while the POWER indicator is
blinking green. Doing so could cause premature lamp failure.
Remote Control Precautions
•
•
•
•
•
•
•
•
Handle the remote control carefully.
If the remote control gets wet, wipe it dry immediately.
Avoid excessive heat and humidity.
Do not heat, take apart, or throw batteries into fire.
If you will not be using the remote control for a long time, remove the batteries.
Ensure that you have the batteries’ polarity (+/–) aligned correctly.
Do not use new and old batteries together, or use different types of batteries together.
Dispose of used batteries according to your local regulations.
Lamp Replacement
•
•
Be sure to replace the lamp when the message [ThE LAmp hAS REAChED ThE END OF ITS USAbLE LIFE.
pLEASE REpLACE ThE LAmp.] appears. If you continue to use the lamp after the lamp has reached the end
of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch
them as the pieces of glass may cause injury.
If this happens, contact your dealer for lamp replacement.
A Lamp Characterꢀstꢀc
The projector has a high-pressure mercury lamp as a light source.
A lamp has a characteristic that its brightness gradually decreases with age. Also repeatedly turning the lamp on
and off will increase the possibility of its lower brightness.
CAUTION:
When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projector. Glass
fragments could fall if the lamp has been burned out.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
About High Altitude mode
•
Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1600 me-
ters or higher.
Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTI-
TUDE] can cause the projector to overheat and the protector could shut down. If this happens, wait a couple
minutes and turn on the projector.
•
•
Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [HIGH ALTITUDE]
can cause the lamp to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO].
Using the projector at altitudes approximately 5500 feet/1600 meters or higher can shorten the life of optical
components such as the lamp.
vꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
............................................................................................i
Important Information
.......................................................................................................... 1
What’s in the Box?......................................................................................................... 1
Introduction to the Projector .......................................................................................... 2
1. Introduction
Congratulations on Your Purchase of the Projector................................................. 2
Features you’ll enjoy :.............................................................................................. 2
About this user’s manual.......................................................................................... 3
Part Names of the Projector.......................................................................................... 4
Front/Top ................................................................................................................. 4
Rear......................................................................................................................... 4
Bottom...................................................................................................................... 5
Top Features............................................................................................................ 6
Terminal Panel Features.......................................................................................... 7
Part Names of the Remote Control ............................................................................... 8
Battery Installation ................................................................................................... 9
Operating Range for Wireless Remote Control ....................................................... 9
Remote Control Precautions.................................................................................... 9
................................................................... 10
Setting Up the Screen and the Projector..................................................................... 10
2. Installation and Connections
Selecting a Location............................................................................................... 10
Making Connections.................................................................................................... 11
Connecting Your PC or Macintosh Computer........................................................ 11
Connecting an External Monitor............................................................................. 13
Connecting Your HDMI Compatible Equipment..................................................... 14
Connecting Your DVD Player with Component Output.......................................... 15
Connecting Your VCR............................................................................................ 16
Connecting to a Network........................................................................................ 17
Connecting the Supplied Power Cable.................................................................. 19
.............................................. 20
Turning on the Projector.............................................................................................. 20
Note on Startup screen (Menu Language Select screen)...................................... 21
Selecting a Source ...................................................................................................... 22
Selecting the computer or video source................................................................. 22
Adjusting the Picture Size and Position....................................................................... 23
3. Projecting an Image (Basic Operation)
Adjusting the focus (Focus ring) ............................................................................ 24
Finely adjusting the size of an image (Zoom lever) ............................................... 24
Adjusting the Tilt Foot............................................................................................ 25
Correcting Keystone Distortion.................................................................................... 26
Optimizing an RGB Image Automatically .................................................................... 28
Adjusting the Image Using Auto Adjust.................................................................. 28
Adjusting Volume Up & Down ..................................................................................... 28
Turning off the Projector.............................................................................................. 29
After Use...................................................................................................................... 30
vꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
..................................................................................... 31
4. Convenient Features
Turning Off the Image and Sound............................................................................... 31
Freezing a Picture ....................................................................................................... 31
Enlarging and Moving a Picture................................................................................... 31
Changing Lamp Mode................................................................................................. 32
Getting Integrated Help ............................................................................................... 32
Using a USB Mouse.................................................................................................... 33
Operate the Menus using the USB mouse ............................................................ 33
Using the Optional Remote Mouse Receiver (NP01MR) ............................................ 34
Correcting Horizontal and Vertical Keystone Distortion (Cornerstone) ....................... 36
Cornerstone........................................................................................................... 36
Displaying Two Pictures at the Same Time................................................................. 39
Selecting the PIP or SIDE BY SIDE Mode [MODE]............................................... 39
POSITION ............................................................................................................. 40
Preventing Unauthorized Use of the Projector............................................................ 41
9
Assigning a Keyword for the first time.................................................................... 41
Checking If Security is enabled.............................................................................. 44
Disabling the Security............................................................................................ 45
Limiting Access Level to Available Menu Items........................................................... 46
L
Operation Using an HTTP Browser............................................................................. 49
Overview................................................................................................................ 49
Preparation Before Use ......................................................................................... 49
Handling of the Address for Operation via a Browser............................................ 49
Structure of the HTTP Server ................................................................................ 50
Projecting Your Computer’s Screen Image from the Projector via a Network
[NETWORK PROJECTOR] ................................................................................... 52
Using the Projector to Operate Your Computer via a Network [REMOTE
M
N
DESKTOP]............................................................................................................. 56
............................................................................................. 61
Making the Most out of the Viewer Function ............................................................... 61
5. Using the Viewer
Features................................................................................................................. 61
Easy to use............................................................................................................ 61
Simple utility software (for computer)..................................................................... 61
Saving data to a USB memory device......................................................................... 61
Using Ulead Photo Explorer 8.0 (optional)............................................................. 61
Using Windows Explorer to save files.................................................................... 61
Operating the Viewer Function from the Projector (playback)..................................... 62
Projecting slides (Viewer) ...................................................................................... 62
Operating Viewer Menu......................................................................................... 62
Setting Option for Viewer....................................................................................... 64
THUMBNAILS menu.............................................................................................. 64
Exiting Viewer........................................................................................................ 65
Changing Background Logo........................................................................................ 66
vꢀꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
................................................................................ 67
Using the Menus.......................................................................................................... 67
6. Using On-Screen Menu
Using ADVANCED menu and BASIC menu.......................................................... 68
Entering alphanumeric characters by using Software Keyboard ........................... 68
Menu tree .................................................................................................................... 69
Menu Elements............................................................................................................ 71
Menu Descriptions & Functions [SOURCE] ................................................................ 72
COMPUTER 1 and 2 ............................................................................................. 72
HDMI...................................................................................................................... 72
VIDEO.................................................................................................................... 72
S-VIDEO................................................................................................................ 72
VIEWER................................................................................................................. 72
NETWORK............................................................................................................. 72
ENTRY LIST.......................................................................................................... 72
Menu Descriptions & Functions [ADJUST].................................................................. 75
[PICTURE]............................................................................................................. 75
[IMAGE OPTIONS]................................................................................................ 78
[VIDEO].................................................................................................................. 82
[AUDIO].................................................................................................................. 83
Menu Descriptions & Functions [SETUP].................................................................... 84
[BASIC].................................................................................................................. 84
[MENU] .................................................................................................................. 92
[INSTALLATION (1)].............................................................................................. 93
[INSTALLATION (2)].............................................................................................. 95
[OPTIONS]........................................................................................................... 108
Menu Descriptions & Functions [INFO.] .................................................................... 110
[USAGE TIME]..................................................................................................... 110
[SOURCE (1)]...................................................................................................... 111
[SOURCE (2)]...................................................................................................... 111
[WIRED LAN]....................................................................................................... 112
[VERSION (1)] ..................................................................................................... 112
[VERSION (2)] ..................................................................................................... 112
Menu Descriptions & Functions [RESET].................................................................. 113
Returning to Factory Default................................................................................ 113
.................................................................................................... 114
7. Maintenance
Cleaning or Replacing the Filter................................................................................ 114
Cleaning the Cabinet and the Lens........................................................................... 116
Replacing the Lamp................................................................................................... 117
ꢀx
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
............................................................................................................. 120
Troubleshooting......................................................................................................... 120
8. Appendix
Indicator Messages.............................................................................................. 120
Specifications ............................................................................................................ 123
Cabinet Dimensions .................................................................................................. 125
Screen Size and Projection Distance........................................................................ 126
Pin Assignments of D-Sub COMPUTER 1/2 Input Connector .................................. 128
Mini D-Sub 15 Pin Connector .............................................................................. 128
Compatible Input Signal List...................................................................................... 129
PC Control Codes and Cable Connection................................................................. 130
PC Control Codes................................................................................................ 130
Cable Connection ................................................................................................ 131
PC Control Connector (D-SUB 9P)...................................................................... 131
Troubleshooting Check List....................................................................................... 132
TravelCare Guide...................................................................................................... 134
x
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
What’s in the Box?
Make sure your box contains everything listed. If any pieces are missing, contact your dealer.
Please save the original box and packing materials if you ever need to ship your Projector.
O
F
F
1
C
O
M
P
V
ID
P
O
3
U
T
E
W
E
R
E
2
O
R
V
IE
S
-V
ID
E
O
W
W
R
N
C
A
U
E
O
T
W
M
T
O
P
O
O
N
R
A
D
1
K
E
N
J
.
T
G
H
H
D
I
A
B
M
I
4
C
P
2
Q
P
I
R
S
J
P
K
7
L
D
E
F
5
T
3
ID
U
V
M
N
M
E
O
8
N
U
.
6
@
/
W
X
0
Y
Z
9
L-CL
CLEA
ICK
R
ENT
EXI
V
O
E
T
L
R
U
M
E
M
A
G
N
IF
R-CLI
Y
P
C
K
IC
T
P
A
U
R
G
E
E
A
N
V
-M
UP
L
U
A
M
T
E
P
ID
M
S
O
E
3
D
D
O
T
D
E
L
R
W
N
E
E
F
S
O
A
S
S
R
H
M
P
E
ID
IF
T
C
T
F
O
C
F
U
R
E
S
/Z
E
Z
O
O
E
M
H
E
L
P
remote control
Batteries (aa x 2)
(7n900811)
Projector
lens cap
(24fU0141)
Power cable
Vga signal cable
soft Case
(24Bs7851)
(7n080204) Us
(7n080011) eU
(7n520052)
For North Amerꢀca only
Registration card
Limited warranty
For Europe only
Guarantee policy
Cd-rOM
User’s manual
(7n951191)
• important infomation (7n8P8541)
• Quick setup guide (7n8P8531)
• security sticker
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Introduction to the Projector
This section introduces you to the VT800 projector and describes key features and controls.
Congratulations on Your Purchase of the Projector
The VT800 is a sophisticated XGA projector that produces an enhanced display. With the VT800 you will be able to
project images up to 500" (measured diagonally). Enjoy crisp and sharp large screen display from your PC, work-
station or Macintosh computer, DVD player, VCR, satellite hookup, HDTV source, as well as images from your USB
storage device. The VT800 provides for enhanced security options to help deter projector theft and provides for full
projector control through the PC control port (D-Sub 9 Pin) and LAN support. With input and output flexibility, long
lamp life and a full function remote, the VT800 lets you enjoy larger than life viewing from a compact and easy to
setup and use projector.
Features you’ll enjoy :
•
LCD projector wꢀth hꢀgh resolutꢀon and hꢀgh brꢀghtness
High resolution display - up to UXGA compatible, XGA native resolution.
Dꢀrect power Off & Auto Start
•
The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even
when projecting an image) using a power strip equipped with a switch and a breaker.
The AUTO POWER ON feature eliminates the need to always use the POWER button on the remote control or
projector cabinet.
•
•
Integrated RJ-45 connector for wꢀred networkꢀng
An RJ-45 connector is equipped as standard features.
Wꢀndows Vꢀsta standard functꢀons Network projector and Remote Desktop can be used
A Windows Vista-based computer can be operated using the projector over a network.
The projector supports the Network Projector function and the Remote Desktop function of Windows Vista.
A varꢀety of ꢀnput ports and a comprehensꢀve array of system control ꢀnterfaces
This projector supports input signals on the following ports: HDMI, 15pin D-Sub, composite and S-video.
Wall Color Correctꢀon
•
•
Built-in Wall Color Correction presets provide for adaptive color correction when projecting onto non-white
screen material (or a wall).
•
•
Sꢀx pꢀcture preset modes for user adjustable pꢀcture and color settꢀngs
Each picture preset mode can be customized and memorized according to your preference.
preventꢀng unauthorꢀzed use of the projector
Enhanced smart security settings for password protection, cabinet control panel lock, and USB memory protec-
tion key to help prevent unauthorized access, adjustments and theft deterrence.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
About this user’s manual
The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to
review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll
find an overview. If the section doesn’t apply, you can skip it.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Part Names of the Projector
Front/Top
Zoom lever
Controls
(
→
(
→
focus ring
S
U
T
A
T
P
S
M
A
L
B
S
U
E
C
R
U
O
S
T
S
U
(
J
→
D
A
O
T
U
A
M
R
O
F
E
R
D
3
Ventilation (inlet) / filter
T
C
E
L
E
S
(
→
remote sensor
(
→
Ventilation (inlet) / filter
Built-in security slot ( )*
security bar
(
→
adjustable tilt foot lever
(
→
lens
lens Cap
adjustable tilt foot
(
→
*
This security slot supports the MicroSaver® Security System. MicroSaver® is a registered trademark of Kens-
ington Microware Inc. The logo is trademarked and owned by Kensington Microware Inc.
Rear
speaker (5W monaural)
remote sensor
(
→
S
EL
ECT
3
D
R
E
F
O
R
M
A
U
T
O
A
D
J
U
S
T
S
O
U
R
C
E
U
S
B
L
A
U
M
P
S
B
S
T
A
T
S
U
-V
ID
S
E
O
IN
A
N
A
U
D
IO
IN
IN
V
C
Ventilation (outlet)
heated air is exhausted from
here.
ID
O
P
E
C
M
O
O
O
P
IN
L
M
U
T
/M
O
E
R
1
N
N
O
E
/
N
T
IN
A
U
D
R
R
IO
A
U
D
IO
IN
M
O
N
IT
O
C
O
P
R
O
C
M
O
L
U
O
P
/M
T
M
U
O
T
N
E
R
2
O
N
E
/
N
T
H
D
A
IN
M
I
U
D
IN
IO
O
U
T
A
U
D
IO
IN
P
C
C
O
N
T
R
O
L
A
C
I
N
terminal Panel
(
→
Main Power switch
aC input
When you plug the supplied power cable into an active
wall outlet and turn on the Main Power switch, the POW-
er indicator turns orange and the projector is in standby
mode.
Connect the supplied power cable’s three-pin plug here,
and plug the other end into an active wall outlet.
(
→
(
→
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Top Features
9
10
8
7
6
1 4 5
SELECT
USB
LAMP
STATUS
3D REFORM AUTO ADJUST SOURCE
11
12
2 3
ꢃ. SOURCE button
→
NOTE: To turn on the projector, press and hold this button
for a minimum of two seconds. To turn off the projector,
press this button twice.
→
→
9. mENU button
→
10. SELECT
/ Volume buttons
→
11. ENTER button
1ꢁ. EXIT button
→
5. USb Indꢀcator
Lights when a USB memory is inserted into the USB
port.
NOTE: The USB indicator will not light when non-USB stor-
age devices such as USB mouse devices are inserted.
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Terminal Panel Features
4
1
8
9
3
HDMI IN
LAN
USB
COMPUTER /
COMPUTER /
COMPONENT 1 IN
COMPONENT 2 IN
AUDIO IN
AUDIO IN
AUDIO IN
S-VIDEO IN
2
MONITOR OUT
AUDIO OUT
PC CONTROL
L/MONO
AUDIO IN
R
R
VIDEO IN
L/MONO
5
6
7
The actual appearance of the terminal panel may differ slightly from that shown in the drawing, but this does not af-
fect the projector’s performance.
1. COmpUTER 1 IN/COmpONENT 1 IN Connector
→
Use this port to connect your PC or control system
to control your projector via a serial cable. This
enables you to control the projector using serial
communication protocol. A commercially available
RS232C cross cable is required to use this port.
You can also control the projector by using PC Con-
trol Utility 3.0 (downloadable from our website:http:
www.nec-pj.com). To do so you must first have PC
Control Utility 3.0 installed on your PC. If you are
writing your own program, typical PC control codes
→
→
ꢁ. COmpUTER ꢁ IN/COmpONENT ꢁ IN Connector
→
→
→
4. S-VIDEO IN Connector (mꢀnꢀ DIN 4 pꢀn) ( page
→
→
→
→
→
→
ꢃ. mONITOR OUT Connector (mꢀnꢀ D-Sub 15 pꢀn)
(
→
→
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Part Names of the Remote Control
→
1
6
5
3
4
8
→
→
OFF
ON
2
POWER
15. Numerꢀc Keypad button/CLEAR button
COMPUTER
AUTO ADJ.
(
→
7
1
2
3
10
VIDEO
S-VIDEO COMPONENT HDMI
1ꢃ. mENU button
17. SELECT
11
14
13
VIEWER NETWORK
PIP
button
12
9
18. ENTER button
19. EXIT button
15
→
→
ID
19
17
→
16
→
18
21
L-CLICK
R-CLICK
→
20
VOLUME
MAGNIFY
PAGE
→
UP
22
29
27
28
31
32
30
24
23
26
25
34
33
→
DOWN
→
PICTURE
AV-MUTE
LAMP MODE
3D REFORM
ASPECT
→
FREEZE
HELP
FOCUS
LENS SHIFT /ZOOM
→
→
ID
→
RD 434E
(not available on this model)
ꢂꢁ. LENS ShIFT button
(not available on this model)
1. Infrared Transmꢀtter
ꢂꢂ. FOCUS/ZOOm button
→
→
NOTE: To turn on the projector, press and hold the POWER
ON button for a minimum of two seconds.
→
NOTE: To turn off the projector, press the POWER OFF but-
ton twice.
→
→
ꢃ. COmpUTER ꢂ button
(not available on this model)
→
→
→
→
(not available on this model)
→
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Battery Installation
1 Press the catch and re-
ꢁ Install new ones (AA). Ensure
ꢂ
Slip the cover back over the bat-
teries until it snaps into place.
move the battery cover.
that you have the batteries’ po-
larity (+/–) aligned correctly.
NOTE: Do not mix different types of
batteries or new and old batteries.
2
1
2
1
Operating Range for Wireless Remote Control
remote sensor on projector cabinet
7m/22 feet
7m/22 feet
30°
30°
30°
30°
remote control
NOTE: Actual operating range may differ slightly from that shown in the drawing.
TIP: You can determine which remote sensor on the projector is enabled in wireless mode. The options are: front, rear or both. (→
•
•
The infrared signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angle
of the remote sensor on the projector cabinet.
The projector will not respond if there are objects between the remote control and the sensor, or if strong light
falls on the sensor.
Weak batteries will also prevent the remote control from properly operating the projector.
Remote Control Precautions
•
•
•
•
•
•
•
•
Handle the remote control carefully.
If the remote control gets wet, wipe it dry immediately.
Avoid excessive heat and humidity.
Do not heat, take apart, or throw batteries into fire.
If you will not be using the remote control for a long time, remove the batteries.
Ensure that you have the batteries’ polarity (+/–) aligned correctly.
Do not use new and old batteries together, or use different types of batteries together.
Dispose of used batteries according to your local regulations.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation and Connections
This section describes how to set up your projector and how to connect PCs, video and audio sources.
1
Your projector is simple to set up and use.
But before you get started, you must first:
z
x
Set up a screen and the projector.
Connect your computer or video equip-
ꢂ
c
Connect the supplied power cable.
NOTE: Ensure that the power cable and any
other cables are disconnected before moving the
projector. When moving the projector or when it
is not in use, cover the lens with the lens cap.
ꢁ
Setting Up the Screen and the Projector
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is
21 inches (0.53 m) measured diagonally when the projector is 29 inches (0.73 m) from the wall or screen. The larg-
est the image can be is 300 inches (7.62 m) when the projector is about 389 inches (9.9 m) from the wall or screen.
Use the drawing below as a guide.
Selecting a Location
screen size (Unit: cm/inch)
609.6 (W) x 457.2 (H) / 240 (W) x 180 (H)
screen size
300"
487.7 (W) X 365.8 (H) / 192 (W) X 144 (H)
406.4 (W) X 304.8 (H) / 160 (W) X 120 (H)
240"
200"
304.8 (W) X 228.6 (H) / 120 (W) X 90 (H)
150"
243.8 (W) X 182.9 (H) / 96 (W) X 72 (H)
120"
203.2 (W) X 152.4 (H) / 80 (W) X 60 (H)
100"
162.6 (W) X 122.0 (H) / 64 (W) X 48 (H)
80"
121.9 (W) X 91.4 (H) / 48 (W) X 36 (H)
60"
9.8
385.7
81.3 (W) X 61.0 (H) / 32 (W) X 24 (H)
40"
7.9/
310.9
6.6
259.8
lens center
4.9/
192.9
3.9/
3.3/
153.5
1.3/
51.2
2.0/
78.7
2.6/
102.3
129.9
Distance (Unit: m/inch)
TIP: The screen sizes above are intermediate values between tele (minimum display area) and wide (maximum display area). Im-
age size can be adjusted with the zoom adjustment up to a maximum of 10%.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation and Connections
Making Connections
Connecting Your PC or Macintosh Computer
NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode
and before turning on the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up.
* If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver or power manage-
ment software.
Enablꢀng the computer’s external dꢀsplay
Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector.
When using a PC compatible laptop, a combination of function keys will enable/disable the external display.
Usually, the combination of the ‘Fn” key along with one of the 12 function keys gets the external display to come on
or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through
external display selections.
NOTE: The COMPUTER 1 IN and COMPUTER 2
IN connectors support Plug & Play (DDC2B).
COMPUTER/COMPONENT 2 IN
AUDIO IN
AUDIO IN
LAN
HDM
COMPUTER /
COMPONENT 1
COMPUTER /
COMPONENT 2
COMPUTER/COMPONENT 1 IN
IO IN
IN
AUDIO IN
IN
AUDIO IN
MONIOUT
AUDUT
PC CONTROL
L/MONO
AUDIO IN
R
VIDEO IN
L/MONO
R
NOTE: For older Macintosh, use a commercially
available pin adapter (not supplied) to connect to
your Mac’s video port.
audio cable (not supplied)
PHONE
Vga signal cable (supplied)
PHONE
PHONE
to mini d-sub 15-pin connector on the
projector. it is recommended that you
use a commercially available distribu-
tion amplifier if connecting a signal
cable longer than the one supplied.
iBM Vga or Compatibles (notebook
type) or Macintosh (notebook type)
•
•
First turn off the computer and the projector before making connections.
Turn down the volume on the computer before connecting an audio cable to the headphone jack of the com-
puter. After connecting the computer to the projector, you can adjust the sound level on the computer and the
projector to your preference.
•
You are recommended to connect an audio cable to an audio out connector (mini jack type) if any.
NOTE: The VT800 is not compatible with video decoded outputs of either the NEC ISS-6020 or ISS-6010 switchers.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation and Connections
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan
converter.
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
* When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
Project an image to fill the screen and then press the AUTO ADJ button on the remote control or the AUTO ADJUST button on
the projector cabinet.
* When noise appears on the sides of the screen:
Use the Overscan feature to display the image correctly.
Be sure to change the Overscan to 0% before pressing the AUTO ADJ or AUTO ADJUST button, otherwise an image may be
displayed with its sides cut off.
•
If you have a PC with a DVI output, use a commercially available DVI-to-HDMI cable to connect the PC to the
HDMI IN connector of the projector. Only the digital signal is available. Connect the AUDIO output of the PC
to the COMPUTER/COMPONENT 2 AUDIO IN stereo mini jack, and in the menu select [HDMI SETTINGS]
→
[AUDIO SELECT]
→
→
HDMI IN
LAN
HDMI IN
USB
COMPUTER
COMPONENT
/
1
COMPUTER
COMPONENT
/
2
S-VIDEO IN
AUDIO IN
IN
AUDIO IN
AUDIO IN
MONITOR OUT
AUDIO OUT
PC CONTROL
L/MONO
AUDIO IN
R
R
VIDEO IN
L/MONO
dVi to hdMi cable (not supplied)
PHONE
audio cable (not supplied)
NOTE: When Viewing a DVI Digital Signal
• The DVI-to-HDMI cable should be within 2 m (78") long.
• Turn off the projector and the PC before connecting the DVI-to-HDMI cable.
• To project a DVI digital signal: Connect the cables, turn the projector on, then select the HDMI input. Finally, turn on your PC.
Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this hap-
pen, restart your PC.
• Some graphics cards have both analog RGB (15-pin D-Sub) and DVI(or DFP outputs. Use of the 15-pin D-Sub connector may
result in no picture being displayed from the digital output of the graphics card.
• Do not disconnect the DVI-to-HDMI cable while the projector is running. If the signal cable has been disconnected and then re-
connected, an image may not be correctly displayed. Should this happen, restart your PC.
• The HDMI IN connector accepts VGA (640 x 480), SVGA (800 x 600), XGA (1024 x 768), 1152 x 864, SXGA (1280 x 1024 @ up
to 60Hz), and SXGA+ (1400 x 1050 @ 60Hz).
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation and Connections
Connecting an External Monitor
LAN
HDMI IN
USB
COMPUTER /
COMPONENT 1
COMPUTER /
COMPONENT 2
S-VIDEO IN
AUDIO IN
IN
AUDIO IN
IN
AUDIO IN
MONITOR OUT
AUDIO OUT
PC CONTROL
L/MONO
AUDIO IN
R
R
VIDEO IN
L/MONO
AUDIO OUT
MONITOR OUT
audio cable (not supplied)
audio cable (not supplied)
Vga signal cable (supplied)
Vga signal cable (not supplied)
AUDIO
IN
PHONE
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog
or component image you’re projecting.
NOTE:
• Daisy chain connection is not possible.
• The MONITOR OUT connector will not output video and sound (Digital signal) via the HDMI IN connector.
• When audio equipment is connected, the projector speaker is disabled.
• When [NORMAL] is selected from [STANDBY MODE], the MONITOR OUT connector outputs the last displayed video signal and
the AUDIO OUT jack outputs the last audio signal. The sound level remains the same as the last one.
• Selecting [POWER-SAVING] in [STANDBY MODE] stops outputting a video signal from the MONITOR OUT connector during
standby mode. This causes the AUDIO OUT jack to stop outputting sound.
1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation and Connections
Connecting Your HDMI Compatible Equipment
You can connect the HDMI output of your DVD player, hard disk player, or notebook type PC to the HDMI IN con-
nector of your projector.
NOTE: The HDMI IN connector supports Plug & Play (DDC2B).
HDMI IN
LAN
HDMI IN
USB
COMPUTER
COMPONENT
/
1
COMPUTER
COMPONENT
/
2
S-VIDEO IN
AUDIO IN
IN
AUDIO IN
AUDIO IN
MONITOR OUT
AUDIO OUT
PC CONTROL
L/MONO
AUDIO IN
R
R
VIDEO IN
L/MONO
HDMI
hdMi cable (not supplied)
I
M D H
S-VIDEO VIDEO
L
R
AUDIO IN
VIDEO OUT AUDIO OUT
HDMOUT
L
R
HDMI Output
audio cable (not supplied)
NOTE: Use an HDMI connect cable for HIGH SPEED (HDMI Ver1.3a category 2 cable)
TIP: For users of audio video equipment with an HDMI connector:
Select “Enhanced”rather than“Normal” if HDMI output is switchable between“Enhanced”and“Normal”.
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.
•
When connecting the HDMI IN connector of the projector to the DVD player, the projector’s video level can be
made settings in accordance with the DVD player’s video level. In the menu select [HDMI SETTINGS] -> [VIDEO
LEVEL] and make necessary settings.
•
•
Acceptable signals are 480p, 720p, 1080i, and 1080p.
If the HDMI input sound cannot be heard, in the menu select [HDMI SETTINGS]
[AUDIO SELECT]
[HDMI].
→
→
What ꢀs hDCp/hDCp technology?
HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protection
(HDCP) is a system for preventing illegal copying of video data sent over a Digital Visual Interface (DVI).
If you are unable to view material via the HDMI input, this does not necessarily mean the projector is not functioning
properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP
and might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation and Connections
Connecting Your DVD Player with Component Output
COMPUTER/COMPONENT 2 IN
AUDIO IN
COMPUTER/COMPONENT 1 IN
AUDIO IN
HDM
LAN
USB
COMPUTER /
COMPONENT 1
COMPUTER /
COMPONENT IN
S-VIDEO IN
AUDIO IN
IN
AUDIO IN
2
AUDIO IN
MONITOR OUT
AUUT
PC CONTROL
L/MONO
AUDIO IN
R
R
VIDEO IN
L/MONO
Optional 15-pin - to - rCa (female) x 3
cable (adP-CV1e)
audio equipment
Component video rCa
3
cable (not supplied)
AUDIO IN
L
R
dVd player
Y
Cb Cr
L
R
Component
AUDIO OUT
audio cable (not supplied)
TIP: A component signal will be automatically displayed. If not, from the menu, select [SETUP] → [OPTIONS] → [SIGNAL SE-
LECT] → [COMPUTER 1 (or 2)] → [COMPONENT].
NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation and Connections
Connecting Your VCR
AUDIO IN
S-VIDEO IN
VIDEO IN
HDMI IN
USB
COMPUTER /
COMPONENT 1
COMPUTER
COMPONENT
/
S-VIDEO IN
AUDIO IN
IN
AUDIO IN
2
IN
AUDIO IN
AUDIO IN
L/MONO
AUDIO IN
R
R
VIDEO IN
L/MONO
audio cable (not supplied)
s-Video cable (not supplied)
Video cable (not supplied)
audio equipment
VCr
S-VIDEO VIDEO
VIDEO OUT
L
R
AUDIO IN
AUDIO OUT
L
R
audio cable (not supplied)
NOTE: Refer to your VCR owner’s manual for more information about your equipment’s video output requirements.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via
a scan converter.
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation and Connections
Connecting to a Network
The VT800 comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable. To use
a LAN connection, you are required to assign an IP address to the projector. For setting the NETWORK, see page
[INSTALLATION (2)]
[NETWORK SETTINGS])
→
→
With the LAN connection, two features are available: Projector control and Picture transmission.
projector control feature
With the wired LAN connection, you can control (power on/off, input select, etc.) and receive information from the
projector over the network using a computer. The following three methods are available:
→
* Using PC Control Utility 3.0*1
* Using Image Express Utility 2.0*1
pꢀcture transmꢀssꢀon feature (Usꢀng WꢀndowsVꢀsta)
A Windows Vista-based computer can be operated using the projector over a network. The projector supports the
→
pꢀcture transmꢀssꢀon feature (Usꢀng User Supportware)
With the wired LAN connection, you can send images and slides from a personal computer to the projector which
then can be projected on the screen. The following two methods are available:
* Using Image Express Utility 2.0*1
* Using Ulead Photo Explorer 8.0*2
With the USB mouse connected to the projector, you can also operate the desktop screen on your Windows PC
connected to the LAN.
* Using Desktop Control Utility 1.0*1
•
For the procedure to connect Windows Vista with the network (wired LAN), refer to the manual of Windows
Vista.
NOTE:
*1 Software is downloadable from http://www.nec-pj.com
*2 Ulead Photo Explorer 8.0 is included on the optional User Supportware 5 CD-ROM.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation and Connections
Example of LAN connectꢀon
Example of wired LAN connection
server
hub
lan cable (not supplied)
NOTE: Use a Category 5 or higher LAN cable.
LAN
LAN
HDMI IN
USB
COMPUTER /
COMPONENT 1
COMPUTER /
COMPONENT 2
S-VIDEO IN
AUDIO IN
IN
AUDIO IN
IN
AUDIO IN
MONITOR OUT
AUDIO OUT
PC CONTROL
L/MONO
AUDIO IN
R
R
VIDEO IN
L/MONO
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation and Connections
Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cable’s three-pin plug to the AC IN of the projector, and then connect the other
plug of the supplied power cable in the wall outlet.
S
E
L
E
C
T
3
D
R
E
F
O
R
M
A
U
T
O
A
D
J
U
S
T
S
O
U
R
C
E
U
S
B
L
A
U
M
P
S
B
S
T
A
T
S
U
S
-
V
I
D
E
O
I
N
L
A
N
A
U
D
IO
I
N
V
C
I
D
O
P
E
M
O
O
O
M
P
U
T
I
L
N
/
M
E
R
1
O
N
N
O
E
/
N
I
A
N
U
D
I
O
I
N
A
U
D
I
O
I
N
C
O
M
O
C
O
M
P
T
U
P
T
E
R
2
N
E
/
N
T
H
D
A
I
M
U
N
I
D
I
O
O
U
T
P
C
C
O
N
T
R
O
L
A
C
I
N
to wall outlet
Make sure that the prongs are fully inserted
into both the aC in and the wall outlet.
About Dꢀrect power Off
The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even when
projecting an image) using a power strip equipped with a switch and a breaker.
CAUTION:
Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated
while the projector is turned on and immediately after the projector is turned off.
CAUTION:
Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing so can
cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable.
TIP: To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and a breaker.
TIP: The projector can be unplugged during its cool down period after it is turned off.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Projecting an Image (Basic Operation)
This section describes how to turn on the projector and to project a picture onto the screen.
Turning on the Projector
NOTE:
• The projector has two power switches: a main power switch and a POWER button (POWER ON and OFF on the remote control).
• When plugging in or unplugging the supplied power cable, make sure that the main power switch is pushed to the off () po-
sition. Failure to do so may cause damage to the projector.
• The projector has a feature to prevent itself from being used by unauthorized individuals. To use this feature, register a key-
S
U
T
A
T
P
S
M
A
L
B
S
U
E
C
R
U
O
S
T
S
U
J
D
1. Remove the lens cap.
A
O
T
U
A
M
R
O
F
E
R
D
3
T
C
E
L
E
S
•
Do not try to remove the lens cap by pulling on the
string. Doing so can cause damage.
2. To turn on the main power to the projector, press the
Main Power switch to the on position ( I ).
S
E
L
EC
T
•
The projector will go into standby mode. When in stand-
by mode, the POWER indicator will light orange and the
STATUS indicator will light green.
USB
3
D
R
E
F
O
R
M
A
U
T
O
A
D
J
U
S
T
S
O
U
R
C
E
U
S
LAMP
STATUS
B
L
U
AM
P
S
B
S
T
A
S
TU
-V
ID
S
E
O
IN
A
U
D
IO
IN
I
C
O
I
C
M
P
O
I
L/
M
U
T
M
P
O
O
E
T
R
N
E
O
N
/
1
IN
A
U
D
R
I
A
U
D
IO
IN
N
C
O
P
C
M
O
/
O
P
M
U
T
E
N
R
2
E
/
IN
N
T
H
D
A
M
U
D
I
IO
O
U
T
I
P
C
C
O
N
T
R
O
L
3. After making sure that the projector is in standby
mode, press the POWER or POWER (ON) button for
a minimum of 2 seconds when the STATUS indicator
goes off and the POWER indicator starts blinking.
OFF
ON
POWER
COMPUTER
AUTDJ.
1
2
3
USB
VIDEO
S-VIDEO COMPONENT
LAMP
STATUS
VIEWER NETWORK
PIP
REFORM AUTO ADJUST SOURCE
When the POWER indicator turns a steady green,
and the projector is ready to use.
•
After you turn on your projector, ensure that the com-
puter or video source is turned on and that your lens
cap is removed.
Standby
Blinking
Power On
Steady green /
orange light
Blinking green Steady green
light light
Press this button for a
minimum of 2 seconds.
(
→
NOTE: When no signal is available, a blue, black or logo screen is displayed.
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Projecting an Image (Basic Operation)
Note on Startup screen (Menu Language Select screen)
When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select
one of the 21 menu languages.
To select a menu language, follow these steps:
1. Use the SELECT button to select one of the 21 lan-
guages for the menu.
L-CLICK
R-CLICK
VOLUME
MAGY
PAGE
UP
SELECT
DOWN
PICTURE
AV-MUTE
LAMP MODE
3D REFORM
ASPECT
3D REFORM AUTO ADJUST SOU
FREEZE
HELP
FOCUS
LENS SHIFT /ZOOM
ID
ID
2. Press the ENTER button to execute the selection.
L-CLICK
R-CLICK
VOLUME
AGE
UP
SELECT
After this has been done, you can proceed to the menu
operation.
DOWN
PICTURE
AV-MUTE
LAMP MODE
3D REFORM
ASPECT
3D REFORM AUTO ADJUST SOU
FREEZE
HELP
If you want, you can select the menu language later. (
→
FOCUS
LENS SHIFT /ZOOM
ID
NOTE:
• The projector cannot be turned off for 60 seconds after the lamp is turned on and while the POWER indicator is blinking green.
• If you turn on the projector immediately after the lamp is turned off or when the ambient temperature is high, the cooling fans
will run for a moment and then you will get an image on the screen.
• Immediately after turning on the projector, screen flicker may occur. This is normal. Wait 3 to 5 minutes until the lamp lighting
is stabilized.
•
•
When the Lamp mode is set to Eco, the Lamp indicator will light green.
If one of the following things happens, the projector will not turn on.
-
If the internal temperature of the projector is too high, the projector detects abnormal high temperature. In this
condition the projector will not turn on to protect the internal system. If this happens, wait for the projector’s
internal components to cool down.
-
-
When the lamp reaches its end of usable life, the projector will not turn on. If this happens, replace the lamp.
(
→
If the lamp fails to light, and if the STATUS indicator flashes on and off in a cycle of six times, wait a full minute
and then turn on the power.
NOTE: Turning the Main Power Switch Off then Back On
Allow a minimum of 5 seconds between turning off the main power switch and turning it back on again.
The same will be applied when a power strip equipped with a switch and a breaker is used.
Failing to do so could result in no power to the projector. (There will be no stand-by LED)
Should this happen, unplug the power cable and plug it in again. Turn on the main power switch.
ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Projecting an Image (Basic Operation)
Selecting a Source
Selecting the computer or video source
Selectꢀng from Source Lꢀst
Press and quickly release the SOURCE button on the projector cabinet to dis-
play the Source list. Each time the SOURCE button is pressed, the input source
will change as follows: “COMPUTER 1/2”, “HDMI”, “VIDEO” (VCR), “S-VIDEO”,
“VIEWER” (slides on a USB memory) or “NETWORK” (LAN port [RJ-45]).
To display the selected source, press the ENTER button.
USB
LAMP
STATUS
REFORM AUTO ADJUST SOCE
Detectꢀng the Sꢀgnal Automatꢀcally
Press and hold the SOURCE button for a minimum of 1 second, the projector
will search for the next available input source. Each time you press and hold the
SOURCE button for a minimum of 1 second, the input source will change as fol-
lows:
USB
LAMP
STATUS
REFORM AUTO ADJUST SOCE
COMPUTER1
COMPUTER1
COMPUTER2
...
HDMI
VIDEO
S-VIDEO
VIEWER
→
→
→
→
→
→
→
If no input signal is present, the input will be skipped. When the input source
you wish to project is displayed, release the button.
Usꢀng the Remote Control
Press any one of the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO, VIEWER or
NETWORK buttons.
OFF
ON
POWER
COMPUTER
AUTO ADJ.
1
2
3
VI
S-VIDEO COMPONENT HDMI
K
PIP
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Projecting an Image (Basic Operation)
Adjusting the Picture Size and Position
Use the adjustable tilt foot lever, the zoom lever or the focus ring to adjust the picture size and position.
Adjusting the focus
[Focus ring]
Adjusting the throw angle (the height of an image)
[Tilt foot]
(
→
Finely adjusting the size of an image
[Zoom lever]
Adjusting the left and right tilt of an image
[Rear foot]
Adjusting the keystone correction
[Keystone] *
* In the above drawings, cables are omitted for clarity.
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Projecting an Image (Basic Operation)
Adjusting the focus (Focus ring)
•
Rotate the focus ring to make focus adjustment.
SE
LE
CT
3D
RE
FO
RM
U
TO
AD
JU
S
SO
UR
CE
US
B
LA
US
M
P
B
S
T
A
TUS
S-
VID
EO
IN
LA
AU
N
DI
O
IN
VID
EO
CO
C
O
M
P
IN
L/M
/M
M
U
T
ON
ON ER
1
O
EN
/
T
AU
IN
DI
R
R
O
IN
AU
DI
O
I
N
M
T
CO
C
M
U
O
M
P
U
P
ON ER
T
EN
/
T
HD
AU
DI
I
O
O
UT
AU
D
N
PC
CO
NT
RO
L
N
Finely adjusting the size of an image (Zoom lever)
•
Rotate the zoom lever to adjust the image size on the screen.
SE
LE
CT
3D
RE
FO
TO
AD
JU
S
SO
UR
CE
US
B
LA
US
M
P
B
S
T
A
TUS
S
VID
EO
IN
LA
AU
N
DI
O
IN
ID
EO
CO
MUT
C
O
M
P
IN
L/M
L
ON
ON ER
EN
O
/
T
1
AU
IN
DI
R
R
O
IN
AU
DI
O
I
N
M
T
CO
O
C
M
O
M
P
U
P
ON ER
T
O
EN
/
T
HD
I
AU
DI
N
O
O
UT
AU
D
I
PC
CO
NT
RO
L
ꢁ4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Projecting an Image (Basic Operation)
Adjusting the Tilt Foot
1. Lift the front edge of the projector.
A
M
R
O
F
E
R
CAUTION:
adjustable tilt
foot lever
1
Do not try to touch the ventilation outlet during Tilt Foot adjustment
as it can become heated while the projector is turned on and during
its cool down period after it is turned off.
2. Push up the Adjustable Tilt Foot Lever on the front of the projector
to extend the adjustable tilt feet (maximum height).
2
adjustable tilt foot
3. Lower the front of the projector to the desired height.
4. Release the Adjustable Tilt Foot lever to lock the Adjustable tilt foot.
there is approximately 10 degrees (up) of adjustment for the front of
S
T U
A
P
S T
M
A
L
B
S
U
E
C
R
U
O
S
the projector.
T
S
U
J
D
A
O
T
U
A
M
R
O
F
E
R
D
3
S E L E C T
TIP: For operating the [KEYSTONE] screen, see “ Correcting Keystone Dis-
3
NOTE: Your “Keystone” correction data can be reset by pressing and holding
the 3D REFORM button for a minimum of 2 seconds.
4
CAUTION:
Do not use the tilt-foot for purposes other than originally intended.
Misuses such as using the tilt foot to carry or hang (from the wall or
ceiling) the projector can cause damage to the projector.
The rear foot height can be adjusted up to 0.5 inch/13 mm.
Rotate the rear foot to the desired height in order to square the image
on the projection surface, but the vertical distance from the bottom to the
desk or floor should be 0.5 inch /13mm to make the projector horizontal
on the flat surface.
ꢁ5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Projecting an Image (Basic Operation)
Correcting Keystone Distortion
When the projector is not exactly perpendicular to the screen, keystone distortion occurs. To overcome it, you can use the
“Keystone” function, a digital technology that can adjust for keystone-type distortion, resulting in a crisp, square image.
The following procedure explains how to use the [KEYSTONE] screen from the menu to correct trapezoidal distortions.
When the projector is set up at an angle in relation to the screen, adjust the Horizontal option of the Keystone menu
so that the top and bottom of sides of the projected image are parallel.
Auto Keystone Correction
The Auto Keystone correction feature will correct vertical distortion of a projected image on the screen. No special
operation required. Just put the projector on a flat surface.
To use the Auto Keystone function, first you must select [AUTO KEYSTONE] in [KEYSTONE] from the menu.
manual Keystone Correctꢀon
1. Press the 3D REFORM button on the remote control or the projec-
tor cabinet.
the Keystone screen will be displayed on the screen.
Projected area
screen frame
2. Press the SELECT button to select [VERTICAL] and then use the
SELECT or so that the left and right sides of the projected im-
age are parallel.
* adjust the vertical keystone distortion.
3. Align the left (or right) side of the screen with the left (or right) side
of the projected image.
•
•
Use the shorter side of the projected image as the base.
in the right example, use the left side as the base.
align left side
4. Press the SELECT button to select [HORIzONTAL] and then use
the SELECT
or
so that the top and bottom sides of the pro-
jected image are parallel.
•
adjust the horizontal keystone distortion.
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Projecting an Image (Basic Operation)
5. Repeat steps 2 and 4 to correct keystone distortion.
6. After completing Keystone correction, press the EXIT button.
the Keystone screen will disappear.
• to perform Keystone correction again, press the 3d refOrM button
to display the Keystone screen and repeat above steps 1 to 6.
NOTE:
• If the projection angle is the same as in the last use, the previous correction setting values are retained in the memory.
To use the previous correction setting values after changing projection angle, select [ON] in [AUTO KEYSTONE] from the menu.
• When doing Step 2, adjust the position of image so that the screen is smaller than the area of the projected area.
• To reset the 3D Reform correction setting values, press and hold the 3D REFORM button for a minimum of 2 seconds.
• Each time the 3D REFORM button is pressed, the item will change as follows: KEYSTONE → CORNERSTONE → None → KEY-
STONE → ...
For information on [CORNERSTONE], see “Correcting Horizontal and Vertical Keystone Distortion (Cornerstone)” on page 36.
• The Cornerstone adjustment will not be available during the Keystone adjustment. To perform the Cornerstone adjustment,
press and hold the 3D REFORM button for a minimum of 2 seconds to reset the Keystone correction setting values. The Key-
stone adjustment will not be available during the Cornerstone adjustment. To perform the Keystone adjustment, press and hold
the 3D REFORM button for a minimum of 2 seconds to reset the Cornerstone correction setting values.
• The 3D Reform feature can cause an image to be slightly blurred because the correction is made electronically.
ꢁ7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Projecting an Image (Basic Operation)
Optimizing an RGB Image Automatically
Adjusting the Image Using Auto Adjust
Optimizing an RGB image automatically.
Press the AUTO ADJUST button to optimize an RGB image automatically.
This adjustment may be necessary when you connect your computer for the first time.
[Poor picture]
OFF
ON
POWER
COMPUTER
AUTO ADJ.
SELECT
1
2
3
VIDEO
S-VIDEO COMPONENT H
VIEWER NETWORK
3D REFORM AUTO T SOURCE
[normal picture]
ID
NOTE:
• Some signals may take time to display or may not be displayed correctly.
• The Auto Adjust function does not work for component, video signals.
• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Clock and Phase manually. (→ page 78)
Adjusting Volume Up & Down
SELECT
Sound level from the speaker and the AUDIO OUT
jack (Stereo mini) on the projector can be adjusted.
USB
LAMP
STATUS
3D REFORM AUTO ADJUST SOURCE
Another way to adjust volume is to use the menu.
Select [ADJUST]
the menu.
[AUDIO]
[VOLUME] from
→
→
NOTE:
• Volume control is not available with the SELECT
or button when an image is enlarged by using the
MAGNIFY (+) button or when the menu is displayed.
0
ID
L-CLICK
VOLUME
R-CLICK
MAGNIFY
PAGE
UP
increase volume
DOWN
PICTE
A
LAMP MODE
FORM
ASPECT
decrease volume
FREEZE
HELP
FOCUS
LENS SHIFT /ZOOM
ID
ꢁ8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Projecting an Image (Basic Operation)
Turning off the Projector
To turn off the projector:
1. Press the POWER button on the projector cabinet or the
POWER OFF button on the remote control. The [POWER
OFF / AREyOU SURE?] message will appear.
OFF
ON
POWER
COMPUTER
AUTO ADJ.
2
3
EO COMPONENT HDMI
USB
LAMP
STATUS
VIEWER NETWORK
PIP
ADJUST SOURCE
EXIT
ID
MENU
2. Press the ENTER button
After the projector turns off, the cooling fans keep operating for
a while (Cooling-off time).
ID
The cooling fans stop operating when the projector turns off
and goes into standby mode.
When in standby mode, the POWER indicator will light orange
and the STATUS indicator will light green.
USB
LAMP
STATUS
L-CLICK
R-CLICK
ADJUST SOURCE
VOLUME
AGE
UP
DOWN
PICTURE
LAMP MODE
ASPECT
3. After making sure that the projector is in standby mode, turn
off the Main Power switch.The power indicator will go out.
About Dꢀrect power Off
The projector has a feature called “Direct Power Off”. This fea-
ture allows the projector to be turned off (even when projecting
an image) using a power strip equipped with a switch and a
breaker.
S
E
L
E
C
T
3
D
R
E
F
O
R
M
A
U
T
O
A
D
J
U
S
T
S
O
U
R
C
E
U
S
B
L
U
AM
P
S
B
S
T
A
S
TU
-V
ID
S
E
O
IN
A
U
D
IO
IN
I
C
O
P
C
M
P
O
L/
M
U
T
M
O
O
N
E
R
1
N
E
O
N
/
T
IN
A
U
D
IO
A
U
D
IO
IN
O
C
O
P
C
M
O
O
P
M
U
T
E
N
R
2
E
/
N
T
H
D
A
IN
I
U
D
IN
IO
O
U
T
U
P
I
C
C
O
N
T
R
O
L
CAUTION
•
Do not unplug the power cable from the wall outlet or projec-
tor when the projector is powered on. Doing so can cause
damage to the AC IN connector of the projector and (or)
the prong plug of the power cable. To turn off the AC power
supply when the projector is powered on, use a power strip
equipped with a switch and a breaker.
•
Do not turn off the AC power supply within 10 seconds of
making adjustment or setting changes and closing the menu.
Doing so can cause loss of adjustments and settings and re-
turn to default.
TIP: The projector can be unplugged during its cool down period after it is
turned off.
ꢁ9
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Projecting an Image (Basic Operation)
After Use
preparatꢀon: Make sure that the main power is turned off.
1. Unplug the power cable.
2. Disconnect any other cables.
3. Retract adjustable tilt feet if extended.
4. Cover the lens with the lens cap.
5. Put the projector and accessories in the supplied soft case.
Place the projector in the soft case with the lens facing upward as shown below. this is to prevent the lens from
damage.
insert the projector with
the lens facing upward
NOTE: When placing the projector in the soft case, retract the tilt foot and the rear feet. Failure to do so may case damage to the
projector.
CAUTION:
Use caution when putting the projector in the soft case immediately after the projector has been operating. The pro-
jector cabinet is hot.
ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
DOWN
PICTURE
AV-MUTE
LAMP MODE
3D REFORM
ASPECT
Turning Off the Image and Sound
FREEZE
HELP
FOCUS
LENS SHIFT /ZOOM
Press the AV-MUTE button to turn off the image and sound for a short period of time.
Press again to restore the image and sound.
NOTE: Even though the image is turned off, the menu still remains on the screen.
Freezing a Picture
DOWN
Press the FREEZE button to freeze a picture. Press again to resume motion.
PICTURE
AV-MUTE
LAMP MODE
3D REFORM
ASPECT
FREEZE
LP
NOTE: The image is frozen but the original video is still playing back.
FOCUS
LENS SHIFT /ZOOM
ID
Enlarging and Moving a Picture
You can enlarge the area you want up to 400 percent.
To do so:
CLEAR
ID
1. Press the MAGNIFy (+) button.
each time the MagnifY (+) button is pressed,
L-CLICK
R-CLICK
the image is magnified.
VOLUME
MAGNIFY
PAGE
UP
* image can be magnified up to 400%
DOWN
PICTURE
AV-MUTE
L
3D REFORM
SPECT
FREEZE
2. Press the SELECT
button.
the area of the magnified image will be moved
ID
3. Press the MAGNIFy (-) button.
L-CLICK
R-CLICK
each time the MagnifY (-) button is pressed,
the image is reduced.
V
IFY
PAGE
UP
L-CLICK
R-CLICK
VOLUME
MAGNIFY
PAGE
UP
DOWN
PICTURE
AV-MUTE
LAMODE
ASPECT
EEZE
ꢂ1
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Changing Lamp Mode
The lamp life can be extended by using the Eco mode.
L-CLICK
R-CLICK
To change to the [ECO] mode, do the following:
VOLUME
MAGNIFY
PAGE
UP
1. Press the LAMP MODE button to display [LAMP MODE] screen.
DOWN
PICTURE
AV-MUTE
LAMP MODE
3D RRM
ASPECT
2. Use the SELECT or button to select [ECO] mode.
FREEZE
HELP
LENS
3. Press the ENTER button.
ID
To cancel it, press the EXIT button.
to change from [eCO] to [nOrMal], go back to step 2 and select [nOrMal]. re-
peat step 3.
Lamp Mode
Description
This is the Default setting
(100% Brightness).
Status of LAMP indicator
Off
NORMAL MODE
Select this mode to increase the
ECO MODE
lamp life (approx. 80% Brightness Steady Green light
light output)
NOTE:
• The projector is always in [NORMAL MODE] for one minute after the lamp is turned on and while the POWER indicator is blink-
ing green. The lamp condition will not be affected even when [LAMP MODE] is changed.
• After a lapse of one minute from when the projector displays a blue, black or logo screen, [LAMP MODE] will automatically
switch to [ECO MODE].
The projector will return to the [NORMAL MODE] once a signal is accepted.
Getting Integrated Help
ID
UP
You get the contents about Help in English, German
and Japanese.
DOWN
PICTURE
AV-MUTE
LAMP MODE
3D REFORM
ASPECT
L-CLICK
FREEZE
HELP
VOLUME
MAGNIFY
PAGE
FOCUS
LENS SHIFT /ZOOM
1. Press the HELP button on the remote control.
UP
ID
• When no menus appear, the “How to Use Help”
screen will be displayed.
DOWN
PICTURE
AV-MUTE
LAMP MODE
3D REFORM
ASPECT
FREEZE
•
When menus appear, the screen will be displayed,
explaining the function of a highlighted item.
display help
exit help
2. Use the SELECT or button to scroll the view-
ing area.
3. Press the EXIT button.
• The Help will be closed.
ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Using a USB Mouse
USB
Using a USB mouse gives you a smooth operation. A commer-
cially available USB mouse can be used.
LAN
HDMI IN
USB
COMPUTER
COMPONENT
/
1
COMPUTER /
COMPONENT 2
AUDIO IN
IN
AUDIO IN
IN
AUDIO IN
S-VIDEO IN
MONITOR OUT
AUDIO OUT
PC CONTROL
L/MONO
AUDIO IN
R
R
VIDEO IN
Menu items that can be operated with your USB mouse are:
L/MONO
•
•
•
•
•
•
•
VIEWER
NETWORK
ENTRY LIST
TOOLS
SECURITY SETTINGS
NETWORK SETTINGS
CORNERSTONE
NOTE: We do not warrant that the USB port of the projector will support all USB mouse devices in the market.
Operate the Menus using the USB mouse
Mouse Cursor
When connecting a USB mouse to the projector, you get a mouse cursor on the screen.
Unless you use your USB mouse within 10 seconds, the mouse cursor disappears.
Adjusting and Setting Display
You can select a menu item and click with the left mouse button to make adjustments and settings.
With the middle button you can use a scroll bar in the menu or the help.
Icons on the top right of the menu
•
•
•
•
Click [Clock] symbol to display the [DATE, TIME PRESET] menu.
→
Click [Mouse] symbol to display the [MOUSE] menu.
Click [?] to display a selection of the selected menu item.
ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Using the Optional Remote Mouse Receiver (NP01MR)
The optional remote mouse receiver enables you to operate your computer’s mouse functions from the remote con-
trol. It is a great convenience for your computer-generated presentations.
Connectꢀng the remote mouse receꢀver to your computer
If you wish to use the remote mouse function, connect the mouse receiver and computer.
The mouse receiver can be connected directly to the computer’s USB port (type A).
NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or change
your computer settings.
Computer
remote mouse receiver
to UsB port of PC or Macintosh
When operatꢀng a computer vꢀa the remote mouse receꢀver
7m/22 feet
30°
30°
remote sensor on the remote mouse receiver
When connectꢀng usꢀng the USb port
For PC, the mouse receiver can only be used with a Windows 98/Me/XP*, Windows 2000, Windows Vista, or
Mac OS X 10.0.0 or later operating system.
* NOTE: In SP1 or older version of Windows XP, if the mouse cursor will not move correctly, do the following:
Clear the Enhance pointer precision check box underneath the mouse speed slider in the Mouse Properties dialog box [Pointer
Options tab].
• The PAGE UP and DOWN buttons do not work with PowerPoint for Macintosh.
NOTE: Wait at least 5 seconds after disconnecting the mouse receiver before reconnecting it and vice versa. The computer may
not identify the mouse receiver if it is repeatedly connected and disconnected in rapid intervals.
ꢂ4
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Operatꢀng your computer’s mouse from the remote control
You can operate your computer’s mouse from the remote control.
PAGE UP/DOWN Button...................scrolls the viewing area of the window or to move to the previous or next slide in Power-
Point on your computer.
SELECT Button..................moves the mouse cursor on your computer.
MOUSE L-CLICK Button ..................works as the mouse left button.
MOUSE R-CLICK Button..................works as the mouse right button.
NOTE:
• When you operate the computer using the SELECT button with the menu displayed, both the menu and the mouse
pointer will be affected. Close the menu and perform the mouse operation.
• The PAGE UP and DOWN buttons do not work with PowerPoint for Macintosh.
About Drag mode:
By pressing the MOUSE L-CLICK or R-CLICK button for 2 or 3 seconds then releasing, the drag mode is set and
the drag operation can be performed simply by pressing the SELECT
MOUSE L-CLICK (or R-CLICK) button. To cancel it, press the MOUSE R-CLICK (or L-CLICK) button.
button. To drop the item, press the
TIP: You can change the Pointer speed on the Mouse Properties dialog box on the Windows. For more information, see the user
documentation or online help supplied with your computer.
ꢂ5
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Correcting Horizontal and Vertical Keystone Distortion (Cor-
nerstone)
Use the 3D Reform feature to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right
side of the screen longer or shorter so that the projected image is rectangular.
Cornerstone
1. Press and hold the 3D REFORM button for a minimum of 2 seconds to reset current adjustments.
Current adjustments for [KeYstOne] or [COrnerstOne] will be cleared.
2. Project an image so that the screen is smaller than the area of the raster.
3. Pick up any one of the corners and align the corner of the image with a corner of the screen.
Projected image
the drawing shows the up-
per right corner.
screen
TIP: When [WIDE SCREEN] is selected from [SCREEN TYPE], lines
that show "16:9" will be displayed both at the top and bottom. Click
the outer corners.
4. Press the 3D REFORM button twice.
the Cornerstone adjustment screen is displayed.
the drawing shows the upper left
icon ( ) is selected.
TIP: If you are adjusting [KEYSTONE], [CORNERSTONE] will not be
available. If this happens, press and hold the 3D REFORM button for a
minimum of 2 seconds to reset the [KEYSTONE] adjustments.
5. Use the SELECT
button to select one icon ( ) which points in the direction you wish to move the
projected image frame.
6. Press the ENTER button.
ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
7. Use the SELECT
button to move the projected image frame as shown on the example.
screen
8. Press the ENTER button.
screen
9. Use the SELECT
button to select another icon which points in the direction.
On the Cornerstone adjustment screen, select [exit] or press the exit button on the remote control.
screen
the confirmation screen is displayed.
10.Press the SELECT or button to highlight the [OK] and press the ENTER button.
This completes the Cornerstone correction.
Selecting [CANCEL] will return to the adjustment screen without saving changes (Step 3).
Selecting [RESET] will return to the factory default.
Selecting [UNDO] will exit without saving changes.
NOTE: To reset the 3D Reform correction setting values, press and hold the 3D REFORM button for a minimum of 2 seconds.
NOTE: During 3D Reform adjustment, [ASPECT RATIO] and [SCREEN] may not be available. Should this happen, first reset the
3D Reform data and then do each setting. Second repeat the 3D Reform adjustment. Changing [ASPECT RATIO] and/or [SCREEN]
setting can limit [3D REFORM] in its adjustable range.
ꢂ7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
The adjustable ranges for ꢂD Reform are as follows:
HORIZONTAL
VERTICAL
CORNERSTONE
KEYSTONE
Max. +/– 40° approx.
Max. +/– 30° approx.
* The following are conditions under which the maximum angle is achieved:
•
Image is projected in Wide (Zoom lever to the maximum)
NOTE:
• If the Cornerstone screen is unavailable (grayed), press and hold the 3D REFORM button for a minimum of 2 seconds to reset
the current correction data. The Cornerstone function becomes available.
• Turning on the projector will reset the previous correction setting values and correct distortion anew if the projection angle is
changed from the last use.
If the projection angle is the same as in the last use, the previous correction setting values are retained in the memory.
NOTE: Using 3D Reform correction can cause the image to be slightly blurred because the correction is made electronically.
ꢂ8
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Displaying Two Pictures at the Same Time
9
The projector has a feature that allows you to view two different signals simultaneously. You have two modes: PIP
mode and Side by Side mode.
From the menu you can select [SETUP]
[BASIC]
[PIP/SIDE By SIDE].
→
→
The [PIP/SIDE BY SIDE] menu item has the following three options: MODE, POSITION, and SOURCE.
Use the SELECT or button to select [MODE], [POSITION] or [SOURCE] and press the ENTER button.
Selecting the PIP or SIDE BY SIDE Mode [MODE]
This option allows you to select two modes: PIP and Side by Side.
Use the SELECT or button to select [PIP] or [SIDE BY SIDE] and press the ENTER button.
PIP: This option allows you to view a sub picture in the main picture.
Main picture
sub
picture
SIDE BY SIDE: This allows you to view two pictures side by side.
Main picture
sub picture
NOTE: The main picture will be displayed on the left side and the sub picture on the right side.
ꢂ9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Vꢀewꢀng Two pꢀctures
1. Press the PIP button on the remote control.
the PiP/side BY side sOUrCe screen will be displayed.
2. Use the SELECT or button to select the source and press the ENTER button.
the PiP screen or side BY side screen will be displayed, depending on which was selected in the [MOde] set-
ting screen.
3. Press the PIP button again to return to the normal screen (single picture).
TIP:
• Selecting another source will return to the normal screen.
• Selecting a source not supported for the main picture or the sub picture will return to the normal screen.
POSITION
This option allows you to select the position of a sub picture in the main picture.
NOTE:
• The default setting is [BOTTOM-RIGHT].
Use the SELECT or button to select the sub picture’s position and press the ENTER button.
The options are: TOP-LEFT, TOP-RIGHT, BOTTOM-LEFT, and BOTTOM-RIGHT.
The following adjustments and settings are available for the main picture only.
-
-
Adjusting picture and sound
→
The following operations are available for both the main and sub pictures.
-
-
Picture and audio mute
Freezing a moving picture
40
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Preventing Unauthorized Use of the Projector
Assigning a keyword prevents the projector from being used by unauthorized individuals.
Turning on the Security function by assigning a keyword for the first time
1. Press the MENU button.
The menu will be displayed.
2. Press the SELECT button to highlight the [SETUP] submenu and press the ENTER button.
The page tab [BASIC] will be highlighted.
3. Press the SELECT button three times to highlight the page tab [INSTALLATION (2)].
41
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
4. Press the SELECT button three times to highlight [SECURITy SETTINGS].
5. Press the ENTER button to display the SECURITy SETTINGS menu.
6. Press the SELECT button four times to highlight [SECURITy SETTINGS] and press the ENTER button.
The Security screen will be displayed.
7.Press the SELECT button once to highlight the Keyword entry box and press the ENTER button.
The Software keyboard will be displayed.
4ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
8. Enter an alphanumeric keyword using the Software keyboard.
For example, to enter “1234”, follow the steps 8-1 to 8-4 below.
NOTE:
• When using your USB mouse, click each number or alphabet.
BS: Delete the character before the cursor or highlight.
: Confirm the keyword and close the Software keyboard.
• The keyword must be 1 to 10 characters long.
• Please make a note of your keyword.
enter a keyword by using the remote control.
8-1. Press the MenU button and the aUtO adJ. button to enter “1”.
the asterisk “ ” will be displayed in the keyword entry box.
8-2. Press the MenU button and the seleCt button to enter “2”.
the asterisk “
” will be displayed in the keyword entry box.
8-3. Press the MenU button and the seleCt button to enter “3”.
the asterisk “
” will be displayed in the keyword entry box.
8-4. Press the MenU button and the seleCt button to enter “4”.
the asterisk “
” will be displayed in the keyword entry box.
8-5. Press the enter button.
9. Press the SELECT button once to highlight [OFF] and press the SELECT button to highlight [ON].
4ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
10.Press the SELECT button to highlight [OK] and press the ENTER button.
The confirmation screen will be displayed.
11.Press the SELECT or button to highlight [yES] and press the ENTER button.
The Security Function will take effect when the projector is turned on next time.
Checking If Security is enabled
Turn off the projector and turn it back on to check if the Security function is enabled.
1. Press the POWER button.
the [POWer Off / are YOU sUre?] message will appear.
Press the enter button or the POWer or the POWer Off button again.
the lamp lights off and the POWer indicator flashes orange. Please wait until the POWer indicator changes
from flashing to steady light.
2. When the POWER indicator lights steady orange, push the Main POWER switch to the off position (O).
the projector will turn off.
3. Push the Main POWER switch to the on position (I).
the POWer indicator lights orange. the projector is in standby condition.
4. Press and hold the POWER button for a minimum of two seconds.
the projector will turn on. the [PrOJeCtOr is lOCKed! enter YOUr KeYWOrd.] message will be dis-
played at the bottom of the screen.
5. Press the MENU button.
the Keyword entry screen will be displayed
6. Press the ENTER button.
the software keyboard will be displayed.
7. Use the same procedures as steps 1 to 8 described in the “Assigning a Keyword for the first time” sec-
tion to enter “1234”.
each time one number is entered, an “ ” (asterisk) will appear. Keyword appears as asterisks so the real key-
word is hidden.
8. After entering your keyword, highlight [OK] and press the ENTER button.
the software keyboard will disappear. this will allow you to operate the projector.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Disabling the Security
1. Press the MENU button.
the menu will be displayed.
NOTE: Immediately after the projector has been turned on and the “Projector is locked! Enter your keyword.” message is dis-
played at the bottom of the screen, pressing the MENU button will display the Keyword entry will be displayed. At this time,
pressing the MENU button will display the menu.
2. Press the SELECT button to highlight [SETUP] and press the ENTER button.
the page tab [BasiC] will be highlighted.
3. Press the SELECT button twice to highlight the page tab [INSTALLATION (2)].
4. Press the SELECT
ton.
button three times to highlight [SECURITy SETTINGS] and press the ENTER but-
5. Press the SELECT button four times to highlight [SECURITy] - [SETTINGS] and press the ENTER but-
ton.
the Keyword entry screen will be displayed
6. Press the ENTER button.
the software keyboard will be displayed.
7. Use the same procedures as steps 1 to 8 described in the “Assigning a Keyword for the first time” sec-
tion to enter “1234”.
each time one number is entered, an “ ” (asterisk) will appear. Keyword appears as asterisks so the real key-
word is hidden.
8. After entering your keyword, highlight [OK] and press the ENTER button.
the software keyboard will disappear. the security screen will be displayed.
9. Highlight [ON] and press the SELECT button to highlight [OFF].
10.Press the SELECT button to highlight [OK] and press the ENTER button.
the security function will be disabled when the projector is turned on next time.
NOTE: Do not forget your keyword. However, if you forget your keyword, NEC or your dealer will provide you with your Release
Code upon proof of ownership.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Limiting Access Level to Available Menu Items
The Account function allows you to manage available menu items by user level.
The projector has two menu modes: the ADVANCED menu and the BASIC menu.
ADVANCED menu .. This is the menu that contains all the available menus and commands. Users with an ADMINISTRATOR or
ADVANCED account can access the ADVANCED menu.
BASIC menu .......... This is the basic menu that contains minimum essentials of menus and commands. Users with a BASIC
account can access the BASIC menu.
NOTE:
• A user with an ADMINISTRATOR account that has no password set is registered at the factory.
This will allow the user to access the ACCOUNT items without password entry.
Loggꢀng On
Logging on your projector
When a user is registered, trying to display the menu will display the LOGON screen, prompting the user to select
the user and to enter the password.
NOTE: If one user logs on to the projector, any other user cannot log on.
1. Enter a user name.
2. Enter the registered password if you have it.
3. Select [OK].
NOTE: Do not forget your password. If you forget your password, ask your administrator. If your administrator forget the pass-
word, ask NEC or your dealer. NEC or your dealer will provide you with your Release Code (24 character length) upon proof of
ownership.
Loggꢀng Off
Logging off your projector
Logging off your projector will prevent an unauthorized user from operating your projector.
1. From the menu, select [SETUP]
[BASIC]
[LOGOFF].
→
→
2. Select [yES].
4ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Creatꢀng or Addꢀng a User
1. From the menu, select [SETUP]
[INSTALLATION (2)]
[SECURITy SETTINGS].
→
→
2. Select [ACCOUNT]-[SETTINGS].
the [aCCOUnt] setting screen will be displayed.
3. Select [CREATE].
the [aCCOUnt] create screen will be displayed.
4. Enter a user name, user type, and password.
•
•
•
A user name must be 16 alphanumeric characters or less (case sensitive).
User type has two options: [ADVANCED] and [BASIC].
Use the software keyboard to enter a password in the NEW PASSWORD entry field.
a password must be 10 alphanumeric characters or less. if no password is set, the user is registered without a
password.
•
•
After entering a password, enter the same password in [CONFIRM PASSWORD] input screen again.
Make a note of your password.
5. Place a checkmark on [ENABLE].
the account will be made available.
6. Select [OK].
this will complete adding a user.
NOTE: Up to 12 user names can be created.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Edꢀtꢀng a User (Changꢀng Account Settꢀngs)
1. From the menu, select [SETUP]
[INSTALLATION (2)]
[SECURITy SETTINGS].
→
→
NOTE: A user with an ADMINISTRATOR account is recommended to change the account settings.
2. Select [ACCOUNT]-[SETTINGS].
the [aCCOUnt] setting screen will be displayed.
3. Select a user name you wish to edit.
4. Select [EDIT].
the [edit] screen will be displayed.
enter your password and press the enter button.
if no password is set, simply press the enter button without entering any password.
5. Change the settings and select [OK].
Deletꢀng a User
1. From the menu, select [SETUP]
[INSTALLATION (2)]
[SECURITy SETTINGS].
→
→
NOTE: A user with an ADMINISTRATOR account is recommended to delete the account settings.
2. Select [ACCOUNT]-[SETTINGS].
the [aCCOUnt] setting screen will be displayed.
3. Select a user name you wish to delete.
4. Select [DELETE].
the [delete] screen will be displayed.
enter your password and press the enter button.
the confirmation screen will be displayed.
5. Select [yES].
this will complete deleting the user.
NOTE: Do not forget your password. If you forget your password, ask your administrator. If your administrator forget the pass-
word, ask NEC or your dealer. NEC or your dealer will provide you with your Release Code (24 character length) upon proof of
ownership.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Operation Using an HTTP Browser
L
Overview
The use of HTTP server functions will allow control of the projector from a web browser without the installation of
special software. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version for the web browser. (This
device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting meth-
od will vary depending on the version of browser. Please refer to the help files and the other information provided in
your software.)
Access is gained to the HTTP server functions by specifying
http:// <the projector’s IP address> /index.html
in the entry column of the URL.
NOTE:
• The display’s or button’s response can be slowed down or operation may not be accepted depending the settings of your net-
work. Should this happen, consult your network administrator.
The projector may not respond if its buttons are repeatedly pressed in rapid intervals. Should this happen, wait a moment and
repeat. If you still can’t get any response, turn off and back on the projector.
• Do not use the HTTP Server functions and PC Control Utility 3.0 included on the optional CD-ROM. Using both at the same time
may result in a connection failure or slow response.
Preparation Before Use
Make network connections and set up the projector and confirm that it is complete before engaging in browser op-
→
Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and
the setting method. Although the type of proxy server will be a factor, it is possible that items that have actually been
set will not be displayed depending on the effectiveness of the cache, and the contents set from the browser may
not be reflected in operation. It is recommended that a proxy server not be used unless it is unavoidable.
Handling of the Address for Operation via a Browser
Regarding the actual address that is entered for the address or entered to the URL column when operation of the
projector is via a browser, the host name can be used as it is when the host name corresponding to the IP address
of the projector has been registered to the domain name server by a network administrator, or the host name cor-
responding to the IP address of the projector has been set in the “HOSTS” file of the computer being used.
Example 1: When the host name of the projector has been set to “pj.nec.co.jp”,
http://pj.nec.co.jp/index.html
is specified for the address or the entry column of the URL.
Example 2: When the IP address of the projector is “192.168.73.1”, access is gained to the
HTTP server functions by specifying
http://192.168.73.1/index.html
for the address or the entry column of the URL.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Structure of the HTTP Server
POWER: This controls the power of the projector.
ON.....................................Power is switched on.
OFF...................................Power is switched off.
VOLUME: This controls the volume of the projector.
.....................................Increases the volume adjustment value.
.....................................Decreases the volume adjustment value.
AV-MUTE: This controls the mute function of the projector.
PICTURE ON....................Mutes the video.
PICTURE OFF ..................Cancels the video muting.
SOUND ON.......................Mutes the audio.
SOUND OFF.....................Cancels the audio muting.
OSD ON............................Mutes the on-screen display.
OSD OFF ..........................Cancels the muting of the on-screen display.
ALL ON .............................Mutes each of the video, audio, and on-screen display functions.
ALL OFF............................Cancels the muting of each of the video, audio, and on-screen display functions.
PICTURE: Controls the video adjustment of the projector.
BRIGHTNESS
.............Increases the brightness adjustment value.
BRIGHTNESS ..............Decreases the brightness adjustment value.
CONTRAST
CONTRAST
.................Increases the contrast adjustment value.
.................Decreases the contrast adjustment value.
COLOR
COLOR
........................Increases the color adjustment value.
........................Decreases the color adjustment value.
HUE ..............................Increases the hue adjustment value.
HUE ..............................Decreases the hue adjustment value.
SHARPNESS
SHARPNESS
...............Increases the sharpness adjustment value.
...............Decreases the sharpness adjustment value.
•
The functions that can be controlled will vary depending on the signal being input to the projector. ( page 77)
→
50
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
SOURCE SELECT: This switches the input connector of the projector.
COMPUTER 1...................Switches to the COMPUTER 1 IN connector.
COMPUTER 2...................Switches to the COMPUTER 2 IN connector.
HDMI.................................Switches to the HDMI IN connector.
VIDEO...............................Switches to the VIDEO IN connector.
S-VIDEO ...........................Switches to the S-VIDEO IN connector.
VIEWER............................Switches to the data on the USB memory device.
NETWORK........................Switches to a LAN signal.
PROJECTOR STATUS: This displays the condition of the projector.
LAMP LIFE REMAINING ....Displays the remaining life of the lamp as a percentage.
LAMP HOURS USED.......Displays how many hours the lamp has been used.
FILTER HOURS USED....Displays how many hours the filter has been used.
ERROR STATUS.............Displays the status of errors occurring within the projector.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Projecting Your Computer’s Screen Image from the Projector
M
via a Network [NETWORK PROJECTOR]
A Windows Vista-based computer can be operated using the projector over a network. The projector supports the
Network Projector function and the Remote Desktop function of Windows Vista.
By selecting the projector connected to the same network as that of your PC, the PC screen image can be project-
ed to the screen via network. There is no need of connection using the VGA signal cable.
SEL
ECT
3D
REF
OR
M
AUT
O
A
DJU
ST
US
U
RCE
B
(
L
AN
)
USB
LAMP
W
USB
IDE
R
ST
A
TUS
E
S-V
E
S
O
IN
N
D
IO
I
N
S
S
VID
EO
E
C
O
CO
M
M
P
IN
L/M
L/M
P
O
U
T
E
ONO
NEN
R
1
/
IN
I
T
W
AUD
IO
I
R
R
N
AUD
IO
I
N
MO
NIT
OR
OU
CO
C
M
OM
PO
P
ONO
N
UT
EN
E
R
2
T
/
HDM
AUD
I
N
I
IO
O
UT
I
AUD
IO
I
PC
N
CON
TRO
L
The projector supports the Network Projector function and the Remote Desktop function of Windows Vista.
Operatꢀon Envꢀronment
Applicable OS
Windows Vista (32-bit version) Home Premium
Windows Vista (32-bit version) Business
Windows Vista (32-bit version) Ultimate
Windows Vista (32-bit version) Enterprise
(Note) These functions are not available on Windows Vista Home Basic.
Hardware specifications
The specifications recommended by Microsoft as the operation environment for
Windows Vista should be satisfied.
Network Environment
Screen color
Wired LAN environment that supports TCP/IP is required.
High Color (16 bits)
True Color (24 bits and 32 bits)
* Setting with 256 colors or less is not available.
Settꢀng the projector to Network projector Input mode
1. With the projector turned on, press the SOURCE button.
the input selection window appears.
another way to display the input selection window is to press the netWOrK button on the remote control. the
netWOrK screen will be displayed. go to step 3.
5ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
2. Press the SELECT or button to select [NETWORK] and press the ENTER button.
in the screen, the [netWOrK] menu is displayed.
3. From the [NETWORK] menu, select [NETWORK PROJECTOR].
the [PrOJeCtOr naMe/disPlaY resOlUtiOn/PassWOrd/Url] will be displayed.
TIP:
• To change the default password “1234”, select [CHANGE] and press the ENTER button.
The [ENTER PASSWORD] screen will be displayed, Enter a numeric password. The password must be eight characters or less.
The changed password stored in the projector will be displayed in the [NETWORK PROJECTOR] screen next time.
5ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Changꢀng the resolutꢀon of Wꢀndows Vꢀsta screen to the ꢀnformatꢀon on [DISpLAY RESOLUTION]
ꢀn the NETWORK pROJECTOR screen.
1. Click [Start] from the desktop of Windows Vista.
2. Click [Control Panel].
3. Click [Adjust screen resolution] displayed under [Appearance and Personalization].
4. Operate [Resolution] slide bar to change the resolution to the resolution displayed on [DISPLAy RESO-
LUTION] in the NETWORK PROJECTOR screen..
5. Click [OK].
the message “do you keep this screen setting?” is displayed.
6. Click [yes].
the resolution of Windows Vista screen is changed to the resolution displayed on [disPlaY resOlUtiOn] in
the netWOrK PrOJeCtOr screen..
projectꢀng the Image wꢀth Network projector
1. Click [Start] from the desktop of Windows Vista.
2. Click [All Programs].
3. Click [Accessories].
4. Click [Connect to a Network Projector].
When the [Permission Connect to a network Projector] window appears,click [Yes.].
the “Connect to a network Projector” window appears.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
5. Click [ Search for a projector (recommended)].
→
in the “available projectors” box, your projector model name is displayed.
6. Click your projector model name.
the message “enter the password for the projector that you selected.” is displayed at the bottom of the window.
7. Check the password displayed in the screen projected by the projector.
8. Input the password to the password input box displayed by the operation at Step 7.
9. Click [Connect].
the network projector function works and the screen of Windows Vista is projected from the projector.
NOTE: When the network projector function works, the background color of the desktop changes to black. When the network
projector function is stopped, the original background color is restored.
Reference: If the projector cannot be found at Step 5, click [ → Enter the projector address]. Then, input the “Network ad-
dress” (Input example: http://10.32.97.61/lan) and “Projectorpassword” (Input example: 82291627) displayed in the screen
projected from the projector.
Exꢀtꢀng the Network projector Operatꢀon
1. Click [Projecting: your projector model name] in the Windows Vista task bar.
2. Click [Disconnect].
the network Projector function is stopped.
3. Press the MENU button of the projector to display the menu. From the menu, select an input terminal
other than [NETWORK].
55
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Using the Projector to Operate Your Computer via a Network
N
[REMOTE DESKTOP]
•
By selecting the PC connected to the same network as that of the projector, the PC screen image can be pro-
jected to the screen via network.
Then, by operating the keyboard connected to the projector, you can operate Windows Vista on the PC con-
nected with the network.
•
With the Remote Desktop function, you can remotely operate the PC placed at a distance from the projector.
Meeting room
Office
NOTE:
• Available versions of Windows Vista are provided on page 52. Windows Vista Home Premium is not available for REMOTE
DESKTOP.
• In this user’s manual this feature is described using Windows Vista as an example, but the following Windows XP will also work
with this feature.
Windows XP Professional Service Pack 2 or later
• A keyboard is required to use the Remote Desktop function.
• The Remote Desktop function can be operated with a keyboard only. Using a wireless mouse with a wireless keyboard is more
useful for operating.
Use a commercially available wireless keyboard, a wireless mouse, and a USB wireless receiver.
Use a commercially available USB keyboard and USB mouse.
• A USB keyboard with a built-in USB hub cannot be used with the projector.
• A wireless keyboard or mouse that supports Bluetooth cannot be used with the projector.
Prepare a commercially available wireless keyboard (US layout version).
NOTE: We do not warrant that the USB port of the projector will support all USB keyboards in the market.
Connect the USB wireless receiver to the USB port (Type A) of the projector. Make all necessary settings for your
wireless keyboard and mouse.
S
E
L
E
C
T
R
USB
D
O
U
R
C
E
U
S
B
L
U
AM
S
P
B
S
T
A
S-VI
TU
S
DEO
IN
N
A
U
D
IO
IN
IN
VID
CO
EO
CO MPU
MPO
IN
L/
M
TER
NEN
T
O
N
O
/
1
IN
A
U
D
R
R
IO
AUD
IO
IN
MON
ITO
R
COM
CO
L
OU
T
/M
MPOPUT
O
N
ER
O
NEN
/
T
2
HD
AU
IN
MI
DIO
OU
T
A
I
P
C
C
O
N
T
R
O
L
A
C
IN
5ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Settꢀng the password to the user account of Wꢀndows Vꢀsta
TIP: If a password has been set for an account, the steps 1 to 9 can be skipped.
1. Click [Start] from the desktop of Windows Vista.
2. Click [Control Panel].
3. Click [Add or remove user accounts] displayed under [User Accounts].
4. When the [User Account Control] confirmation window appears, click [Continue].
5. Click [Administrator].
6. Click [Create a password].
7. Input the password to the [New password] box.
8. Input the same password as that at Step 7 to the [Confirm new password] box.
9. Click [Create a password].
the administrator is changed to [Password Protection].
Settꢀng the Remote Access
1. Click [Start] from the desktop of Windows Vista.
2. Click [Control Panel].
3. Click [System and Maintenance].
4. Click [Allow remote access] displayed under [System].
5. When the [User Account Control] confirmation window appears, click [Continue].
the [system Properties] window appears.
6. Click [Allow connections from computers running any version of Remote Desktop (less secure)] in the
Remote Desktop box and click [OK].
Checkꢀng the Ip address on Wꢀndows Vꢀsta
1. Click [Start] from the desktop of Windows Vista.
2. Click [Control Panel].
3. Click [View network status and tasks] displayed under [Network and Internet].
57
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
4. Click [View status] displayed in blue on the right of [Local Area Connection] in the window.
the [local area Connection status] window appears.
5. Click [Details...].
Write down the value for “iPv4 iP address” (xxx.xxx.xxx.xxx) displayed.
6. Click [Close].
7. Click [X] at the upper right of the window.
the system goes back to the desktop.
Startꢀng the Remote Desktop
1. With the projector turned on, press the SOURCE button.
the input selection window appears.
another way to display the input selection window is to press the netWOrK button on the remote control. the
netWOrK screen will be displayed. go to step 3.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
2. Press the SELECT or button to select [NETWORK] and press the ENTER button.
the [netWOrK] menu will be displayed.
3. From the [NETWORK] menu, use the wireless keyboard to select [REMOTE DESKTOP CONNECTION].
the [remote desktop Connection] window appears.
TIP:
Setting [OPTIONS] in REMOTE DESKTOP
Clicking [OPTIONS] displays the [PERFORMANCE] screen.
Making settings to [OPTIONS] will allow you to display the desktop background, or to enable the window animation function
during the Remote Desktop operation. However, doing this will cause the display’s or mouse’s response to slow down.
If the display’s or mouse’s response is slowed down, try one or more of the following:
DESKTOP BACKGROUND: Clear the check mark to display the desktop background in monochrome.
MENU AND WINDOW ANIMATION: Clear the check mark to disable menu and window animation.
THEMES: Clear the check mark not to use Themes.
SHOW CONTENTS OF WINDOW WHILE DRAGGING: Clear the check mark to show only the window pane
while dragging.
4. Operate the wireless keyboard to input the IP address of Windows Vista and click [CONNECT].
the log-on screen of Windows Vista is displayed in the screen projected by the projector.
5. Operate the wireless keyboard to input the user’s password and press [Enter].
the remote desktop function is started.
Windows Vista desktop is displayed in the screen projected by the projector.
log out the computer.
Use the wireless keyboard connected to the projector to operate Windows Vista.
NOTE: When the projection is made with the remote desktop function, the background color of the desktop is changed to
black.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Convenient Features
Exꢀtꢀng the Remote Desktop
1. Operate the keyboard to click [Start] from the desktop screen projected by the projector.
2. Click [X] on the right of the start menu.
the remote desktop function is stopped.
3. Press the SOURCE button of the projector to select an input terminal other than [NETWORK].
When using the remote control, press a button other than the netWOrK button.
ꢃ0
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Using the Viewer
Making the Most out of the Viewer Function
Features
The Viewer feature allows you to view slides stored on a USB memory on the projector. Even if no computer is
available, presentations can be conducted simply with the projector. This feature is convenient for holding presenta-
tions at meetings and in offices, as well as for playing images taken on digital cameras.
Easy to use
•
•
•
•
Presentations can be made by inserting a USB memory (not supplied)
Easy slide switching
Remote control operation
Jumping to a list of slides or any specific slide
Simple utility software (for computer)
•
Ulead Photo Explorer 8.0SE Basic operable.
•
Control screen for displaying lists of slides and editing.
TIP:
• To use the Viewer, first you need to create presentation materials on your PC (JPEG, BMP, GIF*1, PNG*1, Index*2).
For creating presentation materials using the Ulead Photo Explorer 8.0, see the On-line help in Ulead Photo Explorer 8.0.
*1Both PNG and GIF format support non-interlaced images only.
*2“Index” file is a file created using the Ulead Photo Explorer 8.0 contained on the optional NEC User Supportware 5 CD-ROM.
NOTE:
• Use commercially available USB memory devices.
• We do not warrant that the USB port of the projector will support all USB memory devices in the market.
• The projector does not support NTFS formatted USB memory device.
Be sure to use a USB memory device formatted with the FAT32, FAT16 or FAT file system.
To format your USB memory device in your computer, refer to the document or help file that comes with your Windows.
Saving data to a USB memory device
There are two ways to save your data to a USB memory device.
Using Ulead Photo Explorer 8.0 (optional)
Install Ulead Photo Explorer 8.0 from the User Supportware 5 to your computer. Use Ulead Photo Explorer 8.0 to
create graphic data on your computer and save the files to a USB memory device.
Using Windows Explorer to save files
Supported file format for Viewer are JPEG, BMP, PNG, GIF and Index.
ꢃ1
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Using the Viewer
Operating the Viewer Function from the Projector (playback)
This section describes the operation for showing slides created using the Viewer function with the projector. It is
also possible to make slides directly from the images projected with the projector.
Projecting slides (Viewer)
Preparation: Store JPEG or BMP files (JPEG, BMP, non-interlaced GIF or non-interlaced PNG files) in a USB
memory inserted into your PC.
→
Viewer screen will be displayed. (A slide will be displayed at the factory default.)
•
You can use the VIEWER button on the remote control to select [VIEWER].
Operating Viewer Menu
1. Insert a USB memory into the USB port of the projector.
The USB indicator lights.
2. Press the VIEWER button on the remote control or select the [VIEWER] from the source list.
An image stored in the USB memory will be displayed.
NOTE: When [SHOW THUMBNAILS] is turned on in the OPTIONS menu, the thumbnail screen will be displayed. (→ page 64)
NOTE: Pressing the EXIT button during slide playback will display the thumbnail screen.
Slꢀde and Thumbnaꢀl
When VIEWER is selected, one of the two screens is displayed.
One is a slide and the other is a thumbnail screen.
[SLIDE]
[ThUmbNAILS]
TIP: To switch from [SLIDE] to [THUMBNAILS], press the EXIT button.
The Control bar
Pressing the MENU button during slide playback will display the control bar which allows you to operate a slide-
show. Press the EXIT button to close the control bar.
The control bar contains the following icon buttons:
selects the currently
displayed image for your
advances to the next image. background logo.
Quits slide playback and
then returns to the thumb-
nail screen.
returns to the pre-
vious image.
rotates the image 90 degrees
counterclockwise.
Plays back slides.
rotates the image 90 degrees
clockwise.
stops auto Play while you
are playing back slides.
ꢃꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Using the Viewer
Thumbnaꢀl screen
list of folders
scroll bar
highlight
thumbnail/file name
Cursor (yellow)
information
number of files
Highlight ...................................Indicates the selected folder or drive.
List of folders............................Indicates folders contained on a USB memory.
Information...............................Indicates information of the selected file or folder.
Folder: folder name, number of files, creation date (month/day/year), creation time (hour:minute:
second).
File: file name, slide number/number of displayable slides in a folder, creation date (month/day/
year), creation time (hour:minute:second), file size.
Number of files .........................Indicates number of displayable slides in the selected folder. The maximum number of images
recognized as slides within one directory is about 250.
Thumbnail/file name .................Indicates thumbnails and names contained in a folder.
Cursor.......................................Indicates the selected slide.
Scroll bar ..................................Used to view folders or files not visible in the window.
ꢃꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Using the Viewer
Setting Option for Viewer
PLAY MODE:
MANUAL................ Views a slide manually when the Viewer source is selected.
AUTO..................... Plays back slides automatically when the Viewer source is selected.
INTERVAL:
Specifies interval time between 5 and 300 seconds.
START:
Specifies start screen when the Viewer source is selected.
SHOW THUMBNAILS:
Selecting the Viewer source will display a list of thumbnails of graphic files stored in the USB memory when [ON]
is selected. Selecting the Viewer source will display a list of icons of graphic files stored in the USB memory
when [OFF] is selected.
SORT:
Rearranges the slides or thumbnails by name, extension, date or size.
NOTE: This setting is not available for the following folders:
*Folders created with the “Output Viewer” feature of Ulead Photo Explorer 8.0 or with Viewer PPT Converter 3.0
OK/CANCEL:
To close the Options menu with saving changes, select [OK] and press the ENTER button.
To close the Options menu without saving changes, select [CANCEL] and press the ENTER button.
THUMBNAILS menu
The THUMBNAILS menu will appear when you press the MENU button on the remote control or the projector
cabinet. To close the THUMBNAILS menu, press the EXIT button.
The THUMBNAILS menu includes the following commands:
PLAy.................. Plays back automatically or manually depending on the setting in Options. This allows you to move on to
the next slide when [MANUAL] is selected in the [PLAy MODE].
LOGO................. Replace the default background logo with another logo in JPEG, BMP, non-interlaced GIF or non-inter-
laced PNG format.
OPTIONS............ Displays the Viewer setting options.
ꢃ4
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Using the Viewer
Exiting Viewer
To exit Viewer, switch to another input such as COMPUTER 1, COMPUTER 2, HDMI, VIDEO, S-VIDEO or NET-
WORK.
* To switch to another input, there are two ways:
•
•
Press the COMPUTER 1, COMPUTER 2, HDMI, VIDEO, S-VIDEO or NETWORK button on the remote con-
trol.
Press the MENU button on the remote control to display the Viewer menu. Press the MENU button again to
display the main menu and select the input from the [SOURCE] submenu.
With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected.
Example: When conducting presentations using a combination of slides and moving pictures from a VCR, etc., it is
possible to switch from a Viewer slide to the video picture then back to the Viewer slide simply by using the VIEWER
button.
NOTE: Even if you switch the current Viewer source to another source, the current slide is retained. When you return back to the
Viewer, you will get the slide that has been retained.
ꢃ5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Using the Viewer
Changing Background Logo
You can change the default background logo using the Viewer feature.
NOTE: File size must be 256KB or less. Maximum file resolution is 1024 x 768. File formats other than JPEG, BMP, non-interlaced
GIF or non-interlaced PNG are not available.
Preparation: Store JPEG or BMP files (JPEG, BMP, non-interlaced GIF or non-interlaced PNG files) in a USB mem-
ory into the projector’s USB port.
NOTE: To change highlight from the Thumbnails screen (right window) to a directory tree (left window) , press the EXIT button.
To return highlight to the Thumbnails screen, press the ENTER button.
1. Use the SELECT
button to select a file (slide) for your background logo when displaying the
Thumbnail screen.
2. Press the MENU button to display the THUMBNAILS menu.
3. Use the SELECT button to select [LOGO] and then press the ENTER button.
a confirmation dialog box will be displayed.
4. Use the SELECT button to select [yES] and press the ENTER button. This completes changing a logo
for the background.
*
Once you have changed the background from the NEC logo to another, you cannot return the logo to back-
ground even by using [RESET]. To put the NEC logo back in the background logo, repeat the above steps. The
NEC logo file is included on PC Control Utility 3.0 which is downloadable from our web site:
http://www.nec-pj.com
ꢃꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Using the Menus
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
,
NOTE: The commands such as ENTER, EXIT in the bottom show available buttons for your operation.
2. Press the SELECT
buttons on the remote control or the projector cabinet to display the submenu.
3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the
first tab.
4. Use the SELECT
to adjust or set.
buttons on the remote control or the projector cabinet to select the item you want
you can use the SELECT
want.
buttons on the remote control or the projector cabinet to select the tab you
5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window.
6. Adjust the level or turn the selected item on or off by using the SELECT
control or the projector cabinet.
buttons on the remote
Changes are stored until you adjust it again.
7. Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the pro-
jector cabinet to quit the menu display.
NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.
8. Press the MENU button to close the menu.
To return to the previous menu, press the EXIT button.
ꢃ7
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Using ADVANCED menu and BASIC menu
The projector has two menu modes: the ADVANCED menu and the BASIC menu.
ADVANCED menu .. This is the menu that contains all the available menus and commands. Users with an ADMINISTRAOR or
ADVANCED account can access the ADVANCED menu.
BASIC menu .......... This is the basic menu that contains minimum essentials of menus and commands. Users with a BASIC
account can access the BASIC menu.
NOTE:
• A user with an ADMINISTRATOR account that has no password set is registered at the factory.
This will allow the user to access the ACCOUNT items without password entry.
• When using your USB mouse, click each number or alphabet.
BS: Delete the character before the cursor or highlight.
]
OK/[ : Confirm the keyword and close the Software keyboard.
Entering alphanumeric characters by using Software Keyboard
[IP ADDRESS, PASSWORD]
[USER NAME, PROJECTOR NAME]
[PASSWORD OR KEyWORD]
1 to 0 and Characters
When usꢀng the remote control:
.............................. Use to type in password or keyword.
1. Press the MENU, AUTO ADJ, SELECT , SE-
LECT , SELECT or SELECT button to se-
MODE .................... Selects one of three modes for num-
lect a character in the row.
bers, alphabet and special charac-
ters.
example: to enter “C”, press the seleCt
ton.
but-
SP.......................... Inserts a space
2. Press the MENU, AUTO ADJ, SELECT , SE-
BS.......................... Deletes one character backward
<< ......................... Returns to the previous
>> ......................... Advances to the next
OK.......................... Executes the selection
CANCEL................. Cancels the selection
LECT , SELECT or SELECT button to se-
lect a character in the column.
example: to enter “C”, press the MenU button.
EXIT....................... Deletes a character.
ENTER ................... Makes your input take effect and
closes the input screen.
When usꢀng the mouse:
Point to a character and click it.
[BS]....................... Deletes a character.
[
] ........................ Makes your input take effect and
closes the input screen.
ꢃ8
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Basic menu items are indicated by
shaded area.
Menu tree
Factory default settings are indi-
cated by the gray shaded area.
Menu
Item
SOURCE
COMPUTER 1, COMPUTER 2, HDMI, VIDEO, S-VIDEO, VIEWER, NETWORK, ENTRy LIST
MODE
STANDARD, PROFESSIONAL
1 to 6
HIGH-BRIGHT, PRESEN-
TATION, VIDEO, MOVIE,
GRAPHIC, sRGB
REFERENCE
PRESET
GENERAL
DyNAMIC, NATURAL,
BLACK DETAIL
GAMMA CORRECTION
DETAIL SETTINGS
COLOR TEMPERA-
TURE
5000, 6500, 7800,
8500, 9300, 10500
PICTURE
WHITE BALANCE
CONTRAST RGB, BRIGHTNESS RGB
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
HUE
RESET
ADJUST
CLOCK
PHASE
HORIzONTAL POSITION
VERTICAL POSITION
OVERSCAN
0%, 5%, 10%
RGB
IMAGE OPTIONS
5:4, 4:3, 16:9, 16:10, 15:9
4:3 SCREEN (COMPONENT)/VIDEO/S-VIDEO 4:3, LETTERBOX, WIDE SCREEN, zOOM
ASPECT RATIO
WIDE SCREEN (COMPONENT)/VIDEO/
S-VIDEO
4:3 WINDOW, LETTERBOX, WIDE SCREEN,
4:3 FILL
RESOLUTION
AUTO, NATIVE
NOISE REDUCTION
DEINTERLACE
3D y/C SEPARATION
RANDOM NR, MOSQUITO NR, BLOCK NR
AUTO, VIDEO, FILM
OFF, ON
VIDEO
AUDIO
VOLUME, BASS, TREBLE, BALANCE, 3D SURROUND (OFF, ON)
KEySTONE
AUTO KEySTONE, HORIzONTAL, VERTICAL
CORNERSTONE
PIP/SIDE By SIDE
MODE, POSITION, SOURCE
OFF, BLACKBOARD, BLACKBOARD (GRAy), LIGHT yELLOW, LIGHT GREEN, LIGHT BLUE,
SKy BLUE, LIGHT ROSE, PINK
WALL COLOR
LAMP MODE
OFF TIMER
TOOLS
NORMAL, ECO
BASIC
OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00
PROGRAM TIMER, CORNERSTONE, ENTRy LIST, [DATE, TIME PRESET], [MOUSE], [HELP]
LOGOFF
ENGLISH, DEUTSCH, FRANçAIS, ITALIANO, ESPAñOL, SVENSKA, SUOMI, NORSK, NEDER-
LANGUAGE
SETUP
LANDS, TüRKçE, POLSKI,
, DANSK,
,
, MAGyAR, PORTUGêS,
,
,
,
COLOR SELECT
SOURCE DISPLAy
COLOR, MONOCHROME
ON, OFF
MESSAGE DISPLAy ON, OFF
TIME DISPLAy
ID DISPLAy
ON, OFF
ON, OFF
MENU
MENU DISPLAy TIME MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC
BACKGROUND
BLUE, BLACK, LOGO
FILTER MESSAGE
CLOSED CAPTION
OFF, 100[H], 200[H], 500[H], 1000[H]
OFF, CAPTION 1-4, TEXT 1-4
ꢃ9
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Menu
Item
ORIENTATION
SCREEN
DESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING FRONT
SCREEN TyPE: 4:3 SCREEN, WIDE SCREEN / POSITION
INSTALLATION (1)
GENERAL:
WIRED:
DOMAIN:
MAIL:
PROJECTOR NAME, WIRED LAN
PROFILES, DHCP, IP ADDRESS, SUBNET MASK, GATEWAy,
DNS CONFIGURATION, RECONNECT
HOST NAME, DOMAIN NAME
ALERT MAIL, SENDER’S ADDRESS, SMTP SERVER NAME
RECIPIENT’S ADDRESS 1-3, TEST MAIL
NETWORK SETTINGS
INSTALLATION (2)
COMMUNICATION
SPEED
4800 BPS, 9600 BPS, 19200 BPS, 38400 BPS
CONTROL PANEL LOCK, BACKGROUND LOCK, ACCOUNT LOCK, ACCOUNT, SECURITy,
PJLink
SECURITy SETTINGS
STANDBy MODE
REMOTE SENSOR
CONTROL ID
NORMAL / POWER-SAVING
FRONT / BACK, FRONT, BACK
CONTROL ID NUMBER, CONTROL ID
OFF, NORMAL, FINE
SETUP
AUTO ADJUST
AUTO POWER ON (AC) OFF, ON
AUTO POWER OFF
FAN MODE
OFF, 0:05, 0:10, 0:20, 0:30
AUTO, HIGH, HIGH ALTITUDE
DEFAULT SOURCE
SELECT
LAST, AUTO, COMPUTER1, COMPUTER2, HDMI, VIDEO, S-VIDEO, VIEWER, NETWORK
OPTIONS
COMPUTER1
COMPUTER2
VIDEO, S-VIDEO
VIDEO LEVEL, AUDIO SELECT
LAST, COMPUTER1, COMPUTER2
RGB/COMPONENT, RGB, COMPONENT
RGB/COMPONENT, RGB, COMPONENT
SIGNAL SELECT
COLOR SySTEM
HDMI SETTINGS
OUT TERMINAL
USAGE TIME
SOURCE (1)
SOURCE (2)
WIRED LAN
VERSION (1)
VERSION (2)
LAMP LIFE REMAINING, LAMP HOURS USED, FILTER HOURS USED
INPUT TERMINAL, SIGNAL TyPE, VIDEO TyPE, SOURCE NAME, ENTRy NO.
HORIzONTAL FREQUENCy, VERTICAL FREQUENCy, SyNC TyPE, SyNC POLARITy, SCAN TyPE
IP ADDRESS, SUBNET MASK, GATEWAy, MAC ADDRESS
PRODUCT, SERIAL NUMBER
INFO.
FIRMWARE, DATA, FIRMWARE2, DATA2
RESET
CURRENT SIGNAL, ALL DATA, ALL DATA (INCLUDING ENTRy LIST), CLEAR LAMP HOURS, CLEAR FILTER HOURS
70
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Menu Elements
tab
slide bar
highlight
available buttons
Currently selected
user
Currently selected
source
help button
Close button
solid triangle
radio button
Check box
OK button
Cancel button
return symbol
menu wꢀndows or dꢀalog boxes typꢀcally have the followꢀng elements:
Highlight................ Indicates the selected menu or item.
Solid triangle ......... Indicates further choices are available. A highlighted triangle indicates the item is active.
Tab......................... Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button.......... Use this round button to select an option in a dialog box.
Check box.............. Place a checkmark in the square box to turn the option On.
Slide bar ................ Indicates settings or the direction of adjustment.
OK button .............. Press to confirm your setting. you will return to the previous menu.
Cancel button......... Press to cancel your setting. you will return to the previous menu.
Close button .......... Click to close the window and saving changes (USB mouse only).
Help button............ Indicates that help about that feature is available (USB mouse only). Press the HELP button on the remote
control to display help.
Return symbol....... Indicates the software keyboard is available.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Menu Descriptions & Functions [SOURCE]
COMPUTER 1 and 2
Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
HDMI
Selects the HDMI compatible equipment connected to your HDMI IN connector.
VIDEO
Selects what is connected to your VIDEO input-VCR, DVD player or document camera.
S-VIDEO
Selects what is connected to your S-VIDEO input-VCR or DVD player.
NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or
S-Video source.
VIEWER
This feature enables you to make presentations using a USB memory that contains captured images and slides
created with the exclusive Ulead Photo Explorer 8.0 for NEC contained on the optional User Supportware 5 CD-
ROM.
NETWORK
Selects a signal from the LAN port (RJ-45).
When a source connected on a network is not made settings, the [NETWORK] menu will be displayed.
ENTRY LIST
→
7ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[ENTRY LIST]
Usꢀng the Entry Lꢀst
When any source adjustments are made, the adjustments are automatically registered in the Entry List. The (adjust-
ment values of) registered signals can be loaded from the Entry List whenever necessary.
However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the
Entry List, an error message is then displayed and no additional patterns can be registered. You should thus delete
(adjustment values of) signals that are no longer needed.
Enterꢀng the Currently projected Sꢀgnal ꢀnto the Entry Lꢀst
1. Display the Entry List.
2. Use the SELECT or button on your remote control or the projector cabinet to select any number.
3. Use the SELECT button to select [STORE] and press the ENTER button.
You can edit signals on the [ENTRY LIST].
LOAD..................... Enables you to select a signal from the list.
STORE................... Enables you to store the currently projected signal.
CUT........................ Enables you to remove a selected signal from the list and place it on the “clipboard” in the projector.
COPy..................... Enables you to copy a selected signal from the list and place it on the “clipboard” in the projector.
PASTE.................... Enables you to paste the signal placed on the “clipboard” to any other line of the list.
EDIT....................... Enables you to change SOURCE NAME, INPUT TERMINAL, LOCK, and SKIP.
7ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Source NaMe:
Enter a signal name. Up to 18 alphanumeric characters can be used.
INput terMINal:
Change the input terminal.
lock:
Set so that the selected signal cannot be deleted when [ALL DELETE] is executed. After executing [LOCK],
the changes cannot be saved.
SkIp:
Set so that the selected signal will be skipped during auto search.
When complete, select OK and press ENTER. To exit without storing the setting, select Cancel. Select
[SOURCE NAME] and press ENTER to display the Source Name Edit window. you can change source
name on this window. Press to display the software keyboard, which you can enter alphanumeric
characters.
ALL DELETE........... This feature enables you to delete all the registered signals in the Entry List.
PAGE UP/ PAGE DOWN... Enables you to go to the next page or the previous page.
The following buttons are not available for the currently projecting signals:
1) The CUT and PASTE buttons on the [ENTRY LIST] screen
2) The INPUT TERMINAL button on the [ENTRY EDIT] screen
NOTE: When all the signals in the [ENTRY LIST] are deleted, the currently projected signal will be also deleted except locked sig-
nals.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Menu Descriptions & Functions [ADJUST]
[PICTURE]
[mODE]
This function allows you to determine how to save settings for [DETAIL SETTINGS] of [PRESET] for each input.
STANDARD............ Saves settings for each item of [PRESET] (Preset 1 through 6)
PROFESSIONAL..... Saves all the settings of [PICTURE] for each input.
[pRESET]
This option allows you to adjust neutral tint for yellow, cyan or magenta. There are six factory presets optimized for
various types of images, you can set user adjustable settings.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[DETAIL SETTINGS]
This will provide you with two pages of menus that provide more detailed settings.
[GENERAL]
Selecting Reference Setting [REFERENCE]
This feature allows you to use color correction or gamma values as reference data to optimize for various types
of images. You can select one of the following six settings.
HIGH-BRIGHT.... Recommended for use in a brightly lit room.
PRESENTATION . Recommended for making a presentation using a PowerPoint file.
VIDEO ................ Recommended for typical TV program viewing.
MOVIE................ Recommended for movies.
GRAPHIC ........... Recommended for graphics.
sRGB.................. Standard color values.
Selecting Gamma Correction Mode [GAMMA CORRECTION]
Each mode is recommended for:
DyNAMIC........... Creates a high-contrast picture.
NATURAL........... Natural reproduction of the picture.
BLACK DETAIL... Emphasizes detail in dark areas of the picture.
Adjusting Color Temperature [COLOR TEMPERATURE]
This option allows you to select the color temperature of your choice.
NOTE:
• When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available.
• When [WHITE BALANCE] settings has been changed, the color temperature value on screen does not reflect the real color
temperature.
[WHITE BALANCE]
Adjusting White Balance [WHITE BALANCE]
This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level of the
screen; Brightness for each color (RGB) is used to adjust the black level of the screen.
7ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[CONTRAST]
Adjusts the intensity of the image according to the incoming signal.
[bRIGhTNESS]
Adjusts the brightness level or the back raster intensity.
[ShARpNESS]
Controls the detail of the image for Video. (not valid for RGB and digital signals).
[COLOR]
Increases or decreases the color saturation level (not valid for RGB and digital signals).
[hUE]
Varies the color level from +/- green to +/-blue. The red level is used as reference. This adjustment is only valid for
Video, Component and TV standard inputs (not valid for RGB and digital signals).
Input signal
CONTRAST BRIGHTNESS SHARPNESS
COLOR
HUE
Computer/HDMI (RGB)
Computer/HDMI (Component)
Video, S-Video
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
Viewer, Network
Yes=Adjustable, No=Not adjustable
[RESET]
The settings and adjustments for [PICTURE] will be returned to the factory settings with the exception of the following;
Preset numbers and [REFERENCE] within the [DETAIL SETTINGS] screen when [STANDARD] is selected in [MODE].
The settings and adjustments under [DETAIL SETTINGS] within the [PRESET] screen that are not currently select-
ed will not be reset.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[IMAGE OPTIONS]
Adjustꢀng Clock and phase [CLOCK/phASE]
This allows you to manually adjust CLOCK and PHASE.
CLOCK................... Use this item to fine tune the computer image or to remove any vertical banding that might appear. This
function adjusts the clock frequencies that eliminate the horizontal banding in the image.
This adjustment may be necessary when you connect your computer for the first time.
PHASE................... Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is
evident when part of your image appears to be shimmering.)
Use [PHASE] only after the [CLOCK] is complete.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Adjustꢀng horꢀzontal/Vertꢀcal posꢀtꢀon [hORIZONTAL/VERTICAL pOSITION]
Adjusts the image location horizontally and vertically.
Selectꢀng Overscan percentage [OVERSCAN]
Select overscan percentage (0%, 5% and 10%) for signal.
Projected image
Overscaned by 10%
NOTE: When [NATIVE] is selected in [RESOLUTION], [OVERSCAN] is not available.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Selectꢀng Aspect Ratꢀo [ASpECT RATIO]
Screen Type 4:3 SCREEN (VIDEO)
Screen Type WIDE SCREEN (VIDEO)
RGB
Aspect Ratio allows you to select the best Aspect mode to display your source image.
When screen type 4:3 SCREEN is selected for the source, the following selections will display:
For VIDEO
4:3 ......................... Standard 4:3 aspect
LETTERBOX........... Reduced to display the true aspect with black borders on top and bottom
WIDE SCREEN....... Left & Right stretched with black borders on top and bottom
zOOM .................... Left & Right stretched. Left & Right sides cut. Available for 4:3 only.
When screen type WIDE SCREEN is selected for the source, the following selections will display:
For VIDEO
4:3 WINDOW......... Reduced to display the true aspect with black borders on right and left
LETTERBOX........... Standard 16:9 aspect
WIDE SCREEN....... Left and right stretched to display the true aspect
4:3 FILL ................. Stretched to display in 16:9 aspect ratio
For RGb
4:3 ......................... For a video signal with an aspect ratio of 4:3
5:4 ......................... For a video signal with an aspect ratio of 5:4
16:9 ....................... For a video signal with an aspect ratio of 16:9
16:10 ..................... For a video signal with an aspect ratio of 16:10
15: 9 ...................... For a video signal with an aspect ratio of 15:9
NOTE:
• You can adjust image position vertically for a source with black borders on top and bottom. (→ page 94)
• When [NATIVE] is selected in [RESOLUTION], [ASPECT RATIO] is not available.
NOTE: Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue
such as a coffee shop or hotel and employing compression or expansion of the screen image with a [ASPECT RATIO] or [SCREEN]
setting may raise concern about the infringement of copyrights which are protected by copyright law.
VIDEO
4:3
SQUEEZE
LETTERBOX
Input
Signal
Screen
Type
4:3
WIDE SCREEN
ZOOM
LETTERBOX
LETTERBOX
4:3
SCREEN
4:3 WINDOW
4:3 Fill
WIDE SCREEN
WIDE
SCREEN
80
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
RGb (hDmI ꢀncluded)
4:3
5:4
16:9
16:10
15:9
Input
Signal
Screen
Type
4:3
5:4
5:4
16:9
16:9
16:10
16:10
15:9
15:9
4:3
SCREEN
4:3
WIDE
SCREEN
Typical resolutions and aspect ratios for computer screens.
Resolution
640 x 480
Aspect Ratio
VGA
SVGA
XGA
4:3
4:3
4:3
800 x 600
1024 x 768
1280 x 1024
1280 x 768
1280 x 800
1600 x 1200
SXGA
WXGA
WXGA
UXGA
5:4
15:9
16:10
4:3
Selectꢀng Resolutꢀon [RESOLUTION]
[AUTO] : Displays an RGB signal to fit the screen in the projector’s native resolution (1024 x 768 pixels).
[NATIVE] : Displays an RGB signal in its true resolution.
Example: When a source with 800 x 600 pixels is selected using the VT800:
[AUTO]
[NATIVE]
1024
1024
800
600
768
768
•
•
When [NATIVE] is selected, [OVERSCAN] and [ASPECT] is not available.
[RESOLUTION] is not available under the following conditions:
-
-
-
When [SCREEN TYPE] is set for the resolution other than the projector’s native resolution.
When a signal other than RGB is selected.
When a signal with a higher resolution than the projector’s native resolution is displayed.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[VIDEO]
Usꢀng Noꢀse Reductꢀon [NOISE REDUCTION]
This function is used to reduce video noise.
RANDOM NR ......... Reduces flickering random noise in an image.
MOSQUITO NR...... Reduces mosquito noise that appears around the edges of an image during DVD playback.
BLOCK NR ............. Reduces block noise or mosaic-like patterns by selecting ON.
Selectꢀng Interlaced progressꢀve Conversꢀon process mode [DEINTERLACE]
This function allows you to select an interlaced-to-progressive conversion process for video signals.
AUTO..................... Determines an appropriate interlaced-to-progressive conversion process automatically.
VIDEO.................... Applies a normal interlaced-to-progressive conversion process.
FILM ...................... Applies the automatic detection mode for telecine signals. This option is recommended for a movie pic-
ture.
NOTE: This function is not available with RGB signals.
Turnꢀng On or Off the ꢂD Dꢀmensꢀonal Separatꢀon [ꢂD Y/C SEpARATION]
When projecting an image from a VIDEO input, set to ON to project the highest quality image.
OFF ........................ Turns off the 3 dimensional separation feature.
ON ......................... Turns on the 3 dimensional separation feature.
NOTE: Only available for NTSC 3.58 video signals.
8ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[AUDIO]
Controllꢀng Sound [VOLUmE/bASS/TREbLE/bALANCE]
Adjusts the volume, bass and treble level, left and right balance of the projector speaker and AUDIO OUT (Stereo
Mini Jack).
Enablꢀng ꢂD Surround [ꢂD SURROUND]
Turn on or off the 3D surround effect.
If the AUDIO OUT stereo mini jack of the projector is connected to external equipment, adjusting the sound on the
external equipment can cause sound to be distorted or cracked, depending on the bass, treble or 3D Surround
adjustment. If this happens, return the adjustments of the projector to the factory default (Bass:0, Treble: 0, 3D Sur-
round: Off).
8ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Menu Descriptions & Functions [SETUP]
[BASIC]
Selectꢀng Keystone mode [KEYSTONE]
This feature allows you to correct keystone distortion.
Selecting this item will display the Keystone setting menu.
[AUTO KEYSTONE] will turn on the auto keystone feature.
Changes will be saved even when you turn off the projector.
→
To do do, select [OFF] on the[AUTO KEYSTONE] screen.
NOTE: When [CORNERSTONE] is selected, [KEYSTONE] is not available.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Selectꢀng Cornerstone mode [CORNERSTONE]
This option allows you to correct trapezoidal distortion.
→
NOTE: When [KEYSTONE] is selected, [CORNERSTONE] is not available.
Usꢀng the pIp/SIDE bY SIDE Functꢀon
→
MODE:
This option allows you to select two modes: PIP and SIDE BY SIDE.
PIP: This option allows you to view a sub picture in the main picture.
SIDE BY SIDE: This allows you to view two pictures side by side.
POSITION:
When [PIP] is selected for [MODE], this option allows you to select the position of a sub picture in the main pic-
ture.
The options are: top-left, top-right, bottom left, and bottom right.
NOTE: The [POSITION] cannot be selected when [SIDE BY SIDE] is selected.
SOURCE:
This option allows you to select a sub picture signal.
The options are: Off, VIDEO and S-VIDEO.
Selecting [OFF] will cancel the PIP/SIDE BY SIDE mode and return to the normal screen.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Usꢀng the Wall Color Correctꢀon [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
The following nine options are available.
Settꢀng Lamp mode to Normal or Eco [LAmp mODE]
This feature enables you to select two brightness modes of the lamp: Normal and Eco modes. The lamp life can be
extended by using the Eco mode. Selecting Eco mode decreases fan noise when compared to Normal mode.
Lamp Mode
Description
This is the Default setting
(100% Brightness).
Status of LAMP indicator
Off
NORMAL MODE
Select this mode to increase the
ECO MODE
lamp life (approx. 80% Brightness Steady Green light
light output)
NOTE: If the projector is overheated in Normal mode, there may be a case where the Lamp mode will be forced into the Eco mode
to protect the projector. This mode is called “forced Eco mode”.
When the projector is in forced Eco mode, the picture brightness decreases. The LAMP indicator’s steady green light indicates the
lamp is in Eco mode.
When the projector comes back to normal temperature, the Lamp mode returns to Normal mode.
In the forced Eco mode, changing [LAMP MODE] setting in the menu will not affect the actual lamp mode.
8ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Usꢀng Off Tꢀmer [OFF TImER]
1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2. Press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
NOTE:
• To cancel the preset time, set [OFF] for the preset time or turn off the power.
• When the remaining time reaches 3 minutes before the projector is turned off, the [THE PROJECTOR WILL TURN OFF WITHIN
3 MINUTES] message will be displayed on the bottom of the screen.
[TOOLS]
Usꢀng program Tꢀmer [pROGRAm TImER]
This option turns on/off the projector and changes video signals automatically at a specified time.
NOTE:
• Before setting the Program Timer, make sure that the [DATE, TIME PRESET] feature is set. (→ page 90)
• Make sure that the projector is in the stand by condition with the Main Power Switch on.
• The projector has a built-in clock. The clock will keep working for about two weeks after the main power is turned off. If the
main power is not supplied to the projector for two weeks or more, the built-in clock stops working.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Settꢀng a new program tꢀmer
1. On the PROGRAM TIMER screen, use the SELECT or button to select [SETTINGS] and press the EN-
TER button.
the [PrOgraM list] screen will be displayed.
NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited.
2. Select a blank program number and press the ENTER button.
the [edit] screen will be displayed.
3. Make settings for each item as required.
ACTIVE .................. Place a check mark to enable the program.
DAy........................ Select days of the week for the program timer. To execute the program from Monday to Friday, select
[MON-FRI].To execute the program in everyday basis, select [EVERyDAy].
TIME...................... Set the time to execute the program. Enter time in 24-hour format.
FUNCTION ............. Select a function to be executed. Selecting [POWER] will allow you to turn on or off the projector by set-
ting [ADVANCED SETTINGS]. Selecting [SOURCE] will allow you to select a video source by setting [AD-
VANCED SETTINGS].
ADVANCED SETTINGS.. Select power on/off or a type of video source for the selected item in [FUNCTION].
REPEAT.................. Place a check mark to repeat the program continuing basis . To use the program this week only, clear the
check mark.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
4. Select [OK] and press the ENTER button.
this will complete the settings.
You will be returned to the [PrOgraM list] screen.
NOTE:
• Up to 30 different timer settings can be programmed.
• When [PROGRAM TIMER] is turned on, the [STANDBY MODE] setting is ignored.
• The Program Timer is executed on a set time basis, not in a program basis.
• Once the program not marked with a check in [REPEAT] has been executed, the check mark in the [ACTIVE] check box will be
cleared automatically and the program will be disabled.
• When the on-time and the off-time set for the same time, the off-time setting will take preference.
• Two different sources are set for the same time, the larger program number will take preference.
• The on-time setting will not be executed while the cooling fans are running or an error is occurring.
• If the off-time setting is expired under the condition in which the power off is not possible, the off-timer setting will not be ex-
ecuted until the power off becomes possible.
• Programs not marked with a check mark in [ACTIVE] of the [EDIT] screen will not be executed even if the Program Timer is en-
abled.
• When the projector is turned on by using the program timer and if you want to turn off the projector, set the off-time or do it
manually so as not to leave the projector on for a long period of time.
Actꢀvatꢀng the program tꢀmer
1. Select [ON] on the [PROGRAM TIMER] screen and press the ENTER button.
the [On] will be activated.
2. Press the EXIT button.
the [PrOgraM tiMer] screen will be changed to the [tOOl] screen.
NOTE:
• Selecting [OFF] will disable the Program Timer even when a program is marked with a check mark on [PROGRAM LIST]screen.
• When the [ON] is turned on, the [PROGRAM LIST] cannot be edited. To edit the programs, select [OFF] to turn off the Program
Timer.
Changꢀng the programmed settꢀngs
1. On the [PROGRAM LIST] screen, select a program you want to edit and press the ENTER button.
2. Change the settings on the [EDIT] screen.
3. Select [OK] and press the ENTER button.
the programmed settings will be changed.
You will be returned to the [PrOgraM list] screen.
Changꢀng the order of programs
1. On the [PROGRAM LIST] screen, select a program whose order you want to change and press the SE-
LECT button.
2. Press the SELECT button to select or
.
3. Press the ENTER button a few times to select a row to which you wish to move the program.
the order of the programs will be changed.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Deletꢀng the programs
1. On the [PROGRAM LIST] screen, select a program number you want to delete and press the SELECT
button.
2. Press the SELECT button to select [DELETE].
3. Press the ENTER button.
the confirmation screen will be displayed.
4. Select [yES] and press the ENTER button.
the program will be deleted.
this will complete deleting the program.
Usꢀng [CORNERSTONE]
(
→
Usꢀng [ENTRY LIST]
(
→
Settꢀng the Current Date and Tꢀme [DATE, TImE pRESET]
You can set the current time, month, date, and year.
NOTE: The projector has a built-in clock. The clock will keep working for about 2 weeks after the main power is turned off. If the
main power is off for 2 weeks or more, the built-in clock will cease. If the built-in clock ceases, set the date and time again. The
built-in clock will not cease while in the standby mode.
TIME ZONE: Select your time zone.
DAYLIGHT SAVING TIME: Place a check mark to adjust the clock for daylight saving changes.
INTERNET TIME SERVER: Place a check mark to turn on clock synchronization. When this option is turned on,
the projector’s built-in clock will be synchronized with an Internet timer server in every 24 hours and at the time of
projector’s start up.
UPDATE button: Synchronizes the projector’s built-in clock immediately.
The UPDATE button is not available unless the INTERNET TIME SERVER check box is turned on.
Settꢀng mouse poꢀnter, button and Sensꢀtꢀvꢀty [mOUSE]
This option lets you to change your USB mouse settings. The mouse settings feature is available for USB mouse
only. Choose the settings you want:
MOUSE BUTTON ... [RIGHT HAND] or [LEFT HAND]
MOUSE SENSITIVITy.. [FAST], [MEDIUM] or [SLOW]
Usꢀng [hELp]
(
→
90
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Loggꢀng Off Your projector [LOGOFF]
This feature allows you to log off your projector without turning it off.
Logging off your projector will prevent an unauthorized user from operating your projector.
To log off your projector, follow the steps below.
1. Press the MENU button and use the SELECT button to highlight [SETUP].
2. Use the SELECT or the ENTER button to highlight [BASIC].
3. Use the SELECT button to highlight [LOGOFF], and press the ENTER button.
the [lOg Off PrOJeCtOr /are YOU sUre?] message will be displayed.
4. Select [yES] and press the ENTER button to log off your projector and close the menu, and then the
LOGON screen will be displayed.
NOTE:
• When selecting [NO] and press the ENTER button, you will return to the Logoff screen in Step 2.
to log on your projector, select a user name, then enter your password and select [OK] and press the enter
button.
the lOgOn screen will close. logging on your projector is done.
NOTE:
The default LOGON screen will be shown as follows:
USER NAME → ADMINISTRATOR
PASSWORD → No setting
See “Limiting Access Level to Available Menu Items” on page 47 for entering a user name and assigning a password.
Selectꢀng menu Language [LANGUAGE]
You can choose one of 21 languages for on-screen instructions.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[MENU]
Selectꢀng menu Color [COLOR SELECT]
You can choose between two options for menu color: color and monochrome.
Turnꢀng On / Off Source Dꢀsplay, message and Tꢀme [SOURCE DISpLAY], [mESSAGE DISpLAY],
[TImE DISpLAY], [ID DISpLAY]
SOURCE DISPLAy .......This option turns on or off input name display such as Computer 1, Computer 2, HDMI, Video, and No
Input to be displayed on the top right of the screen.
MESSAGE DISPLAy........This option turns on or off messages. Even though selecting [OFF], the following message will appear.
• “Projector is locked”. When the projector security is unlocked, the message will disappear.
TIME DISPLAy.............This option turns on or off the current time displayed on the top left of the screen.
ID DISPLAy .................This option turns on or off the ID number which is displayed when the ID SET button on the remote
control is pressed.
NOTE: The source and current time will be displayed for the time specified in [MENU DISPLAY TIME]. When [MANUAL] is se-
lected in [MENU DISPLAY TIME], the source and current time will be always displayed.
Selectꢀng menu Dꢀsplay Tꢀme [mENU DISpLAY TImE]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.
The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is
the factory preset.
Selectꢀng a Color or Logo for background [bACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default background is blue.
→
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
• When the BACKGROUND LOCK in [SECURITY SETTINGS] is turned on, the background cannot be changed.
Selectꢀng Interval Tꢀme for Fꢀlter message [FILTER mESSAGE]
This option allows you to select the time preference between displaying the message for cleaning the filters. Clean
→
Five options are available: Off, 100[H], 200[H], 500[H], 1000[H]
The default setting is 500[H].
NOTE: The message for filter cleaning will be displayed for one minute when the projector is turned on or off. To cancel the mes-
sage, press any button on the projector cabinet or the remote control.
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
Settꢀng Closed Captꢀon [CLOSED CApTION]
This option sets several closed caption modes that allow text
to be superimposed on the projected image of Video or S-Video.
OFF ..............................This exits the closed caption mode.
CAPTION 1-4 ...............Text is superimposed.
TEXT 1-4......................Text is displayed in full screen.
9ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[INSTALLATION(1)]
Selectꢀng projector Orꢀentatꢀon [ORIENTATION]
This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projec-
tion, desktop rear projection, and ceiling front projection.
DESKTOP FRONT
CEILING REAR
DESKTOP REAR
CEILING FRONT
9ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Selectꢀng Aspect Ratꢀo and posꢀtꢀon for Screen [SCREEN]
SCREEN TyPE ....... Select one of two options: 4:3 SCREEN or WIDE SCREEN for the screen to be used. See also [ASPECT
RATIO].
POSITION .............. This feature allows you to adjust the vertical position of the image when WIDE SCREEN has been selected
for the screen type.
When WIDE SCREEN has been selected there is no-signal area above and below the image.
Blanking area or no-signal area
NOTE: This option is available only when [WIDE SCREEN] is selected in [SCREEN TYPE].
NOTE:
• [POSITION] is not available when [4:3 SCREEN] is selected for [SCREEN TYPE] or when [LETTERBOX] is selected for [ASPECT
RATIO].
94
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
INSTALLATION(2)
[NETWORK SETTINGS]
This feature allows you to set various setting items when the projector is used on your network.
CAUTION
• Consult with your network administrator about these settings.
hꢀnts on how to Set Up LAN Connectꢀon
To configure the projector to communicate on the network using the LAN port (RJ-45):
1. Select the [WIRED] tab for the LAN port (RJ-45).
2. On the [WIRED] tab, select a number from the [PROFILES] list for your LAN settings.
Two settings can be stored in memory for the LAN port.
3. On the [WIRED] tab, turn on or off [DHCP], specify IP address, Subnet Mask, Gateway and DNS Con-
figuration. Select [OK] and press the ENTER button.
(
→
To recall the settings from memory:
After selecting the [WIRED] tab, select the number from the [PROFILES] list.
→
To connect a DHCP server:
On the [WIRED] tab, select [DHCP] and press the ENTER button. A check mark will be placed. Select again
and press the ENTER button. The check box will be cleared.
→
95
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
To receive error messages or information on the remaining lamp life via e-mail:
1. On the [MAIL] tab, select [ALERT MAIL] and press the ENTER button. A check mark will be placed.
2. Set [SENDER’S ADDRESS], [SMTP SERVER NAME] and [RECIPIENT’S ADDRESS]. Select [OK] and
press the ENTER button.
(
→
[GENERAL]
This page allows you to specify a unique projector name and to check the current status of the LAN settings.
9ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[pROJECTOR NAmE]
Specify a unique projector name. Press to display the software keyboard and type in. Up to 16 alphanumeric
characters, signs and symbols can be used. After entering a name, select [OK] and press the ENTER button.
NOTE: The [PROJECTOR NAME] will not be affected even when [RESET] is done from the menu.
Usꢀng Software Keyboard
1 to 0 and
Characters....... Use to type in password or keyword.
MODE .................... Selects one of three modes for numbers, alphabet and special characters.
SP.......................... Inserts a space
BS.......................... Deletes one character backward
<< ......................... Returns to the previous
>> ......................... Advances to the next
OK.......................... Executes the selection
CANCEL................. Cancels the selection
97
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[WIRED]
Profiles (for LAN port [RJ-45]):
Up to two settings for the LAN port (RJ-45) can be stored in memory of the projector.
Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options.
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
To recall the settings from memory:
After selecting the [WIRED] tab, select the [PROFILE 1] or [PROFILE 2] from the [PROFILES] list.
Select [OK] and press the ENTER button.
DHCP:
Enabling this option automatically assigns an IP address to the projector from your DHCP server.
Disabling this option allows you to register the IP address or subnet mask number obtained from your network
administrator.
IP ADDRESS.......... Set your IP address. Press to display the software keyboard and type in 12 numeric characters.
SUBNET MASK...... Set your subnet mask number. Press to display the software keyboard and type in 12 numeric characters.
GATEWAy .............. Set the default gateway of the network connected to the projector. Press to display the software keyboard
and type in 12 numeric characters.
DNS CONFIGURATION.. Type in the IP address of DNS server on the network connected to the projector. 12 numeric characters
are used.
RECONNECT.......... Use this button to retry to connect the projector to a network. Try this if you have changed [PROFILES].
98
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[DOmAIN]
HOST NAME .......... Type in a hostname. Up to 15 alphanumeric characters can be used.
DOMAIN NAME...... Type in domain name of the network connected to the projector. Up to 60 alphanumeric characters can be
used.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[mAIL]
ALERT MAIL:
Checking this box enables Alert Mail feature.
This option notifies your computer of an error message via e-mail when using wired LAN. The error message
will be notified when the projector lamp has reached the end of its usable life or an error occurs in the projector.
Sample of a message sent from the projector:
the lamp is at the end of its usable life. Please replace the lamp.
Projector name: x x x x
lamp hours Used: xxxx [h]
SENDER’S ADDRESS:
Specify the senders address. Use the Software keyboard. Up to 60 alphanumeric and symbols characters can
be used. See “Using Software Keyboard” in Appendix for more details.
SMTP SERVER NAME:
Type in the SMTP server name to be connected to the projector. Up to 60 alphanumeric characters can be used.
RECIPIENT’S ADDRESS 1 to 3:
Type in your recipient’s address. Up to 60 alphanumeric and symbols characters can be used.
TEST MAIL:
Send a test mail to check if your settings are correct.
NOTE:
• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the Recipient’s
Address is correctly set.
• Unless any one of the [SENDER’S ADDRESS], [SMTP SERVER’S NAME] or [RECIPIENT’S ADDRESS 1-3] is selected, [TEST
MAIL] is not available.
• Be sure to highlight [OK] and press the ENTER button before executing [TEST MAIL].
100
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Selectꢀng Communꢀcatꢀon Speed [COmmUNICATION SpEED]
This feature sets the baud rate of the PC Control port (D-Sub 9 Pin). It supports data rates from 4800 to 38400 bps.
The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the
equipment, a lower baud rate may be recommended for long cable runs).
Your selected communication speed will not be affected even when [RESET] is done from the menu.
Settꢀng Securꢀty [SECURITY SETTINGS]
Dꢀsablꢀng the Cabꢀnet buttons [CONTROL pANEL LOCK]
This option turns on or off the Control Panel Lock function.
NOTE:
• This Control Panel Lock does not affect the remote control functions.
• When the control panel is locked, pressing and holding the EXIT button on the projector cabinet for about 10 seconds will
change the setting to [OFF].
Settꢀng a password [bACKGROUND LOCK]
A password can be set for your projector to avoid operation by an unauthorized person.
When [BACKGROUND LOCK] is set, changing the background data in the USB memory will display the Password
input screen.
NOTE: When [BACKGROUND LOCK] is turned on, [BACKGROUND] cannot be selected from the menu.
[ENTRY]
To assign your password:
NOTE: Up to 10 alphanumeric characters can be assigned.
1. Type a password.
An asterisk will be displayed.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
The Software keyboard appears. Use the Software keyboard to type a password on the [ENTER PASS-
WORD] screen and press the ENTER button.
The [CONFIRM PASSWORD] screen will be displayed.
2. Type the same password again and press the ENTER button.
your password will be assigned.
[DELETE]
To delete your password:
1. Select [DELETE PASSWORD] and press the ENTER button.
2. Enter your password.
An asterisk will be displayed.
3. Press the ENTER button.
your password will be deleted.
NOTE:
• Do not forget your password. However, if you forget your keyword, consult with your dealer.
• The [BACKGROUND LOCK] will not be affected even when [RESET] is done from the menu.
ACCOUNT LOCK
When [ACCOUNT LOCK] is set to [ON], you can set it to [OFF].
When [ACCOUNT LOCK] is set to [OFF], you can set it to [ON].
The [ACCOUNT] setting is available only when [ACCOUNT LOCK] is set to [OFF].
NOTE: Do not forget your password. However, if you forget your keyword, use the projector's ADMINISTRATOR account to log on
and set [ACCOUNT LOCK] to [OFF].
ACCOUNT
10ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[SECURITY]
The Security function enables you to protect your projector so that the projector will not project a signal unless you
enter a keyword. There is also an option to lock the projector by using a registered USB memory* as a protect key.
Once you have registered your USB memory as a protect key, you are required to insert the registered USB mem-
ory into the USB port of the projector each time you turn on the projector. You can enable the Security function by
→
*
The projector does not support NTFS formatted USB memory device.
Be sure to use a USB memory device formatted with the FAT32, FAT16 or FAT file system.
To format your USB memory device in your computer, refer to the document or help file that comes with your
Windows.
ON/OFF .................. This turns the Security function on or off. This setting will take effect when the projector is turned on next
time. This setting will take effect when the projector is turned on next time.
KEyWORD............. Enter an appropriate keyword when you use the Security function. (Up to 10 characters can be used.) The
Security function is available only when your password is entered.
USE PROTECT KEy.. Check this box to lock your projector when using a USB memory. To use a keyword without a USB mem-
ory, do not check this box.
READ..................... Reads data from a USB memory.
REGISTER.............. Registers data from the USB memory. The Security function is not available unless at least one USB
memory is registered. (if the [USE PROTECT KEy] check box is selected) Up to 5 USB memory devices
can be registered.
DELETE.................. Deletes data of a registered USB memory.
To set up a keyword to enable the Securꢀty functꢀon wꢀthout usꢀng a regꢀstered USb memory.
1. Use the SELECT or button to select [KEyWORD] and use the software keyboard to enter a keyword.
NOTE: Please make a note of your password.
2. Use the SELECT or button to select [OFF] and then use the SELECT or to select [ON].
3. Use the SELECT or button to select [OK] , then press the ENTER button.
The [AREyOU SURE?] message will appear.
4. Use the SELECT or button to select [yES] and press the ENTER button.
The Security function takes effect.
10ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
To regꢀster a USb memory devꢀce as a protect key.
preparatꢀon: Insert the USB memory device into the USB port (type A) of the projector.
1. Use the SELECT or button to select [USE PROTECT KEy] and press the ENTER button.
2. Use the SELECT or button to select [READ] and press the ENTER button.
Data of the USB memory will be read into the projector.
3. Use the SELECT or button to select [REGISTER] and press the ENTER button.
Downloaded data will be registered and be displayed in the list window.
4. Use the SELECT or button to select [KEyWORD] and use the software keyboard to enter a password.
NOTE: Please make a note of your password.
5. Use the SELECT or button to select [OFF] and then use the SELECT or to select [ON].
6. Use the SELECT or button to select [OK] , then press the ENTER button.
The [AREyOU SURE?] message will appear.
7. Use the SELECT or button to select [yES] and press the ENTER button.
The Security function takes effect.
To turn on the projector when Securꢀty ꢀs enabled (when usꢀng your password only).
1. Press and hold the POWER button for a minimum of two seconds.
The projector will be turned on and a message to the effect that the projector is security-protected will
be displayed.
2. Press the MENU button.
The Release Code input screen will be displayed.
3. Enter your keyword in the Release Code input screen.
you can view the projected image.
NOTE: Do not forget your password. However, if you forget your keyword, NEC or your dealer will provide you with your Release
Code. See more information at the end of this section.
To turn on the projector when Securꢀty ꢀs enabled (when usꢀng USb memory devꢀce as a protect
key).
preparatꢀon: Insert the registered USB memory device into the USB port (type A) of the projector.
Press and hold the POWER button for a minimum of two seconds.
The projector will turn on and then recognize the USB memory device. Once the image has been projected, it will
stay on without the USB memory device.
•
the projector does not support ntfs formatted UsB memory device.
Be sure to use a UsB memory device formatted with the fat32, fat16 or fat file system.
to format your UsB memory device in your computer, refer to the document or help file that comes with your
Windows.
•
•
We do not warrant that the UsB port of the projector will support all UsB memory devices in the market.
When the projector is turned on, if the registered UsB memory device is not inserted into the projector, no
signal will be displayed with a message to the effect that the projector is security-protected. to turn off the se-
curity protection, insert the registered UsB memory device into the projector.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
•
•
the security disable mode is maintained until the main power is turned off (by setting the main power switch
to “O” or unplugging the power cord). in the following cases you will be asked to check the protect key or input
the password:
(1)When [OK] is selected at an image for which security is set and the power is turned off then back on
(2)When the main power is turned off then back on while the security function is enabled
(3)When you attempt to display an image for which security is set while the security function is enabled
Blanks (spaces) cannot be used in the Keyword section.
To delete USb memory data you regꢀstered.
1. Use the SELECT or button to select [DELETE] and use the SELECT button to select the list window.
2. Use the SELECT or button to select the information on the USB memory device you wish to delete.
3. Press the SELECT button to select [DELETE] and press the ENTER button.
The information on the USB memory device will be deleted.
If you’ve lost your regꢀstered USb memory, proceed as follows:
1. Press and hold the POWER button for a minimum of two seconds.
The projector will be turned on and display a message to the effect that the projector is security-protected.
2. Press the MENU button.
The Release Code input screen will be displayed as well as your Request Code (24 alphanumeric charac-
ters).
NOTE: NEC or your dealer will provide you with your Release Code in exchange for your registered password and Request Code.
3. Enter your Release Code in the Release Code Input screen.
The security protection will be turned off.
NOTE:
• Some brands of USB memory devices cannot be used as a protect key.
• You should register one or more USB memory devices in case your registered USB memory device is damaged or stolen. Up to
5 pieces can be registered.
• Once the registered USB memory device has been formatted, the USB memory device cannot be recognized as your registered
protect key.
The Security will not be disabled by using [Reset].
105
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Settꢀng a password for pJLꢀnk [pJLꢀnk]
This option allows you to set a password when you use the PJLink feature.
Password: Enter a password (up to 32 characters)
To set and delete a password, repeat steps described in [BACKGROUND LOCK].
NOTE: Do not forget your password. However, if you forget your keyword, consult with your dealer.
NOTE: What is PJLink?
PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standard protocol is estab-
lished by Japan Business Machine and Information System Industries Association (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
Setting of PJLink will not be affected even when [RESET] is done from the menu.
Selectꢀng power-savꢀng ꢀn [STANDbY mODE]
The projector has two standby modes: [NORMAL] and [POWER-SAVING].
Power-saving mode is the mode that allows you to put the projector in the power-saving condition which consumes
less power than the Normal mode. The projector is preset for Normal mode at the factory.
NOTE:
• The HTTP server functions are not available during POWER-SAVING mode.
• The MONITOR OUT function is not available during POWER-SAVING mode.
• Control through the PC Control connector and LAN mode is not available during POWER-SAVING mode. For PC control and LAN
mode of the projector it is recommended to leave the projector in the Normal mode.
• When [PROGRAM TIMER] is turned on, the [STANDBY MODE] setting is ignored.
• Your setting will not be affected even when [RESET] is done from the menu.
NORMAL ....................... Power indicator: Orange light/Status indicator: Green light
POWER-SAVING ........... Power indicator: Orange light/Status indicator: Off
Turnꢀng On or Off Remote Sensor [REmOTE SENSOR]
This option determines which remote sensor on the projector is enabled in wireless mode.
The options are: front/back, front, and back.
10ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Settꢀng ID to the projector [CONTROL ID]
You can operate multiple projectors separately and independently with the same single remote control. To do so,
you have to assign an ID number to each projector.
CONTROL ID NUMBER.......Select a number from 1 to 254 you wish to assign to your projector.
CONTROL ID.......................Select [OFF] to turn off the CONTROL ID setting and select [ON] to turn on the CONTROL ID set-
ting.
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
Usꢀng the Remote Control to change IDs
1. Press the ID SET button on the remote control.
the COntrOl id screen will be displayed.
If the projector can be operated with the current remote control ID, the [ACTIVE] will be displayed. If the projec-
tor cannot be operated with the current remote control ID, the [INACIVE] will be displayed. To operate the inac-
tive projector, assign the ID by using the following procedure (Step 2).
2. Press one of 0 to 9 buttons while pressing and holding the ID SET button on the remote control.
the range of ids is from 1 to 254.
To clear the ID:
Press the CLEAR button while pressing the ID SET button.
NOTE:
• Setting "0 (zero)" means to clear the ID.
• You cannot operate the projector using the remote control if the remote ID is not the same as the projector ID.
3. Release the ID SET button.
the updated COntrOl id screen will be displayed.
NOTE: The IDs can be cleared for a few days after the batteries are run down or removed.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[OPTIONS]
Settꢀng Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the RGB image can be automatically or manually adjusted for noise
and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE].
OFF ........................ The RGB image will not be automatically adjusted.
you can manually optimize the RGB image.
NORMAL................ Default setting. The RGB image will be automatically adjusted. Normally select this option.
FINE....................... Select this option if fine adjustment is needed. It takes more time to switch to the source than when
[NORMAL] is selected.
Enablꢀng Auto power On [AUTO pOWER ON (AC)]
Turns the projector on automatically when the power cable is inserted into an active power outlet and the main
power switch is turned on. This eliminates the need to always use the POWER button on the remote control or pro-
jector cabinet.
To use the AUTO POWER ON (AC) function, you must first press the main power switch to the position “On” before
plugging in the power cable.
Enablꢀng power management [AUTO pOWER OFF]
When this option is selected you can enable the projector to automatically turn off (at the selected time: 5min.,
10min., 20min., 30min.) if there is no signal received by any input.
Enablꢀng hꢀgh Speed Fan mode [FAN mODE]
This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode.
AUTO..................... The built-in fans automatically run at a variable speed according to the internal temperature.
HIGH...................... The built-in fans run at high speed.
HIGH ALTITUDE..... The built-in fans run at a high speed. Select this option when using the projector at altitudes approximate-
ly 5500 feet/1600 meters or higher.
When you wish to cool down the temperature inside the projector quickly, select [HIGH].
NOTE:
• It is recommended that you select High speed mode if you use the projector non-stop for consecutive days.
• Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTITUDE] can cause
the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector.
• Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [HIGH ALTITUDE] can cause the
lamp to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO].
• Your setting will not be affected even when [RESET] is done from the menu.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Selectꢀng Default Source [DEFAULT SOURCE SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST...................... Sets the projector to default to the previous or last active input each time the projector is turned on.
AUTO..................... Searches for an active source in order of COMPUTER1 → COMPUTER2 → HDMI → VIDEO → S-VIDEO
→ VIEWER → COMPUTER1 and displays the first found source.
COMPUTER 1 ........ Displays the RGB source from the COMPUTER 1 IN connector every time the projector is turned on.
COMPUTER 2 ........ Displays the RGB source from the COMPUTER 2 IN connector every time the projector is turned on.
HDMI..................... Displays the digital source from the HDMI IN connector every time the projector is turned on.
VIDEO.................... Displays the Video source from the VIDEO IN connector every time the projector is turned on.
S-VIDEO ................ Displays the Video source from the S-VIDEO IN connector every time the projector is turned on.
VIEWER................. Displays slides from the USB memory device every time the projector is turned on.
NETWORK ............. Displays a signal from LAN port (RJ-45).
Selectꢀng Sꢀgnal Format [SIGNAL SELECT]
COMPUTER 1/2
Allows you to set [COMPUTER 1] and [COMPUTER 2] to automatically detect an incoming RGB or component
source such as a computer or DVD player. However there may be some RGB and component signals that the
projector is unable to detect. In this case, select [RGB].
Selectꢀng [COLOR SYSTEm]
This feature enables you to select video standards manually.
Normally select [AUTO]. Select the video standard from the pulldown menu. This must be done for Video and
S-Video Connectors separately.
Settꢀng hDmI [hDmI SETTINGS]
Make the settings for video level and audio level when connecting HDMI equipment such as a DVD player.
VIDEO LEVEL......... Select [NORMAL] to disable the [ENHANCED] feature of your HDMI equipment. Select [ENHANCED] to
improve image contrast and increase detail in the dark areas.
AUDIO SELECT...... Select [HDMI] to switch the HDMI IN digital audio signal and select [COMPUTER 2] to switch the COM-
PUTER 2 input audio signal.
Settꢀng mONITOR OUT Connector [OUT TERmINAL]
This option allows you to determine which RGB or component source is output from the MONITOR OUT and the
AUDIO OUT connectors during Standby mode.
LAST...................... The video and audio signal from the last COMPUTER 1 or COMPUTER 2 input will be output to the MONI-
TOR OUT connector.
COMPUTER 1, 2 .... The video and audio signal from the COMPUTER 1 or COMPUTER 2 input will be output to the MONITOR
OUT connector.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Menu Descriptions & Functions [INFO.]
Displays the lamp usage hours, the status of the current signal and settings, NETWORK settings and version.
The information included are as follows:
[USAGE TIME]
LAMP LIFE REMAINING (%)
LAMP HOURS USED (H)
FILTER HOURS USED (H)
NOTE: The progress indicator shows the percentage of remaining lamp life. The value informs you of the amount of lamp and fil-
ter usage respectively.
• When the remaining lamp time reaches 0, the Lamp Life Remaining bar indicator changes from 0% to 600 Hours and the
countdown starts.
If lamp life remaining time reaches 0 hours, the projector will not turn on regardless of whether the lamp mode is set to Normal
or Eco.
•
The message to the effect that the lamp should be replaced will be displayed for one minute when the projector is turned on or off.
To dismiss this message, press any button on the projector or the remote control.
Lamp Life
NORMAL
2500 Hours (Min.)
ECO
3500 Hours (Max.)
110
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
[WIRED LAN]
This page shows information on settings for the LAN port (RJ-45)
IP ADDRESS.......... Indicates the IP address of the projector when the LAN port (RJ-45) is used.
SUBNET MASK...... Indicates the subnet mask of the projector when the LAN port (RJ-45) is used.
GATEWAy .............. Indicates the gateway of the network connected to the projector when the LAN port (RJ-45) is used.
MAC ADDRESS...... Indicates the MAC address of the LAN port (RJ-45).
[VERSION (1)]
[VERSION (2)]
PRODUCT
SERIAL NUMBER
CONTROL ID
FIRMWARE
DATA
FIRMWARE2
DATA2
11ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Using On-Screen Menu
Menu Descriptions & Functions [RESET]
Returning to Factory Default
The Reset feature allows you to change adjustments and settings to the factory preset for sources by the following
methods:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
All the items in [ADJUST] can be reset.
[ALL DATA]
Reset all the adjustments and settings for all the signals to the factory preset except [ENTRY LIST], [LANGUAGE],
[BACKGROUND], [FILTER MESSAGE], [SECURITY SETTINGS], [NETWORK SETTINGS], [COMMUNICATION
SPEED], [STANDBY MODE], [CONTROL ID], [FAN MODE], [DATE, TIME PRESET], [LAMP LIFE REMAIN-
ING], [LAMP HOURS USED] and [FILTER HOURS USED].
[ALL DATA (INCLUDING ENTRY LIST)]
Reset all the adjustments and settings for all the signals to the factory preset except [LANGUAGE], [BACK-
GROUND], [FILTER MESSAGE], [SECURITY SETTINGS], [NETWORK SETTINGS], [COMMUNICATION
SPEED], [STANDBY MODE], [CONTROL ID], [FAN MODE], [DATE, TIME PRESET], [LAMP LIFE REMAIN-
ING], [LAMP HOURS USED] and [FILTER HOURS USED].
Also deletes all the signals in the [ENTRY LIST] and returns to the factory preset.
NOTE: Locked signals in Entry List cannot be reset.
Clearꢀng Lamp hour meter [CLEAR LAmp hOURS]
Resets the lamp clock back to zero.
NOTE: Elapsed time of the lamp use will not be affected even when [RESET] is done from the menu.
NOTE: The projector will turn off and go into standby mode when you continue to use the projector for another 600 hours after the
lamp has reached the end of its life. In this condition you cannot clear the lamp hour meter on the menu. If this happens, press the
HELP button on the remote control for 10 seconds to reset the lamp clock back to zero. Do this only after replacing the lamp.
Resettꢀng the Fꢀlter Usage hours [CLEAR FILTER hOURS]
Resets the filter usage back to zero.
NOTE: Elapsed time of the filter use will not be affected even when [RESET] is done from the menu.
11ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Maintenance
This section describes the simple maintenance procedures you should follow to clean the filters and replace the lamp.
Cleaning or Replacing the Filter
The air-filter sponge keeps dust and dirt from getting inside the projector and should be frequently cleaned. If the
filter is dirty or clogged, your projector may overheat.
NOTE: The message for filter cleaning will be displayed for one minute when the projector is turned on or off.
To cancel the message, press any button on the projector cabinet or the remote control.
CAUTION
•
•
•
Turn off the projector, turn off the main power switch and unplug the projector before replacing the filter.
Only clean the outside of the filter cover with a vacuum cleaner.
Do not attempt to operate the projector without the filter cover.
To clean the aꢀr-filter:
Vacuum the filter-through the filter cover.
S
U
T
A
T
P
S
M
A
L
B
S
U
E
C
R
U
S O
S T
J U
D
A
O
T
A U
R M
E F O
R
3 D
T
C
E
L
E
S
filter
To reset the filter usage time, from the menu, select [RESET]
[CLEAR FILTER HOURS].
→
(
→
114
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Maintenance
To replace the filter (sponge):
CAUTION
•
•
•
•
•
Replace both filters at the same time.
Before replacing the filters, remove dust and dirt from the projector cabinet.
The projector contains high-precision parts. Keep out dust and dirt during filter replacement.
Do not wash the filter with water. Water will damage the filter membrane.
Reattach the filter cover correctly. Failure to do so may cause projector malfunction.
preparatꢀon: Replace the lamp before replacing the filters.
NOTE: When you replace the lamp, it is also wise to replace the filter. The filter comes in the same package with your replacement lamp.
1. Remove the filter cover by pushing down on the catch of the cover until you feel it detach.
Catch
2. Gently peel off the filter (sponge) and replace it with the new one.
The filter is attached with self-adhesive tape. Peel off the release paper before use.
3. Reinstall the new filter cover.
•
Slip the filter cover back until it snaps into place.
rear
front
115
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Maintenance
4. Connect the supplied power cable, turn on the Main Power switch and turn on the projector.
5. Finally, select the menu [RESET] [CLEAR FILTER HOURS] to reset the filter usage hours.
→
→
(
→
Cleaning the Cabinet and the Lens
1. Turn off the projector before cleaning.
2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong
detergents or solvents such as alcohol or thinner.
3. Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.
S
U
T
A
T
P
S
M
A
L
B
S
U
S
U
T
A
T
P
S
M
A
L
B
S
U
E
C
R
U
S O
S T
J U
C E
D
A
R
U
O
T
S O
A U
S T
J U
R M
E F O
A D
R
3 D
U T O
A
R M
E F O
R
3 D
T
C
E
L
E
S
T
C
E
L
E
S
11ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Maintenance
Replacing the Lamp
When the lamp reaches the end of its life, the LAMP indicator in the cabinet will blink red. Even though the lamp
may still be working, replace the lamp to maintain the optimal projector performance. After replacing the lamp, be
→
CAUTION
•
DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Turn the projector off,
wait 30 seconds, turn off the main power switch and then disconnect the power cable. Allow at least one hour
for the lamp to cool before handling.
•
•
DO NOT REMOVE ANY SCREWS except one lamp cover screw and two lamp housing screws. You could re-
ceive an electric shock.
Do not break the glass on the lamp housing.
Keep finger prints off the glass surface on the lamp housing. Leaving finger prints on the glass surface might
cause an unwanted shadow and poor picture quality.
•
The projector will turn off and go into standby mode when you continue to use the projector for another 600 hours
after the lamp has reached the end of its life. If this happens, be sure to replace the lamp. If you continue to use
the lamp after the lamp reaches the end of its life, the lamp bulb may shatter, and pieces of glass may be scattered
in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your NEC
dealer for lamp replacement.
To replace the lamp:
Optional lamp and tools needed for replacement:
•
•
Replacement lamp NP05LP
Phillips screwdriver or equivalent
1. Place the projector on a soft cloth and turn it over to access the lamp cover on the bottom.
/
O
R
V
D I
E
O
N I
A
U
L
D
M
/
O I
O
N
N I
O
S
V
-
D I
E
O
N I
U
S
B
A
U
D
O
O
I
N
I
T
A
U
D
O
U
C
T
C
O
L
A
P
M
N
P
U
P
C
R
E
O
N
/
R
O
L
U
D
N I
C
O
C
M
O
M
P
U
T
E
R
A
U
I
2. Use a Philips screwdriver to loosen the lamp cover screw and remove the lamp cover.
P
C
C
O
N
P
C
T
R
O
C
O
L
N
T
R
O
L
C O M
C O M P U
C O
C O M P
/
/
A U D I O I N
A U D I O I N
117
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Maintenance
3. Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheeling
condition.The two screws are not removable.
C
O
N
T
R
O
L
M
/
A U D I O I N
interlock
NOTE: There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this interlock.
4. Remove the lamp housing by holding it.
Insert a new lamp housing until the lamp housing is plugged into the socket.
CAUTION
Do not use a lamp other than the NEC replacement lamp NP05LP.
Order this from your NEC dealer.
C
O
N
T
R
O
L
M
/
A U D I O I N
C
O
N
T
R
O
L
P
M
/
A U D
118
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Maintenance
5. Secure it in place with the two screws.
Be sure to tighten the screws.
C
O
N
T
R
O
L
M
/
A U D I O I N
6. Reattach the lamp cover.
Slip the lamp cover back until it snaps into place.
Tighten the lamp cover screw.
Be sure to tighten the screw.
C
O
N
T
R
P
C
O
L
C
O
N
T
R
O
L
C
/
/
U D I O I N
A U D I O I N
7. Connect the supplied power cable, turn on the Main Power switch and turn on the projector.
8. Finally, select the menu
usage hours.
[RESET]
[CLEAR LAMP HOURS] to reset the lamp life remaining and lamp
→
→
NOTE: When you continue to use the projector for another 600 hours after the lamp has reached the end of its life, the projector
cannot turn on and the menu is not displayed.
If this happens, press the HELP button on the remote control for 10 seconds to reset the lamp clock back to zero.
When the lamp time clock is reset to zero, the LAMP indicator goes out.
Note for US Resꢀdents
The lamp in this product contains mercury. Prease dispose according to
Local, State or Federal Laws.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
Troubleshooting
This section helps you resolve problems you may encounter while setting up or using the projector.
Indicator Messages
Power Indicator
Indꢀcator Condꢀtꢀon
projector Condꢀtꢀon
The main power is off.
Note
Off
–
0.5 sec On,
0.5 sec Off
2.5 sec On,
0.5 sec Off
0.5 sec On,
0.5 sec Off
2.5 sec On,
0.5 sec Off
The projector is getting ready to turn on.
Off Timer (Off Time) is activated.
The projector is cooling down.
Wait for a moment.
Green
–
Blinking light
Steady light
Wait for a moment.
–
Orange
The Program Timer is activated.
Green
Orange
The projector is turned on.
The projector is in Standby.
–
–
Status Indicator
Indꢀcator Condꢀtꢀon
Off
projector Condꢀtꢀon
Note
Normal
–
1 cycle (0.5 sec
On, 2.5 sec Off)
2 cycle (0.5 sec
On, 0.5 sec Of)
4 cycle (0.5 sec
On, 0.5 sec Off)
Reattach the lamp cover correctly.
The projector is overheated. Move
the projector to a cooler location.
Lamp cover error
Temperature error
Fan error
Red
Blinking light
Fans will not work correctly.
6 cycle (0.5 sec
On, 0.5 sec Off)
Lamp fails to light. Wait a full min-
ute and then turn on again.
Lamp error
Green
Orange
Green
Re-firing the lamp
The projector is re-firing.
you have pressed cabinet button
when Control Panel Lock is on.
Remote control ID and projector ID
are not matched.
Control Panel Lock is on
Steady light
CONTROL ID error
The projector is in Standby.
–
Lamp Indicator
Indꢀcator Condꢀtꢀon
projector Condꢀtꢀon
Note
Off
Normal
–
Lamp has reached its end of life. Lamp replace- Replace the lamp.
Lamp has been used beyond its limit. The projec- Replace the lamp.
Blinking light
Steady light
Red
(
→
Red
tor will not turn on until the lamp is replaced.
(
→
Green
Lamp is in Eco mode
–
Over-Temperature protectꢀon
If the temperature inside the projector rises too high, the over-temperature protector will automatically turn off the
lamp with the STATUS indicator blinking (2-cycle On and Off.)
Should this happen, do the following:
•
•
•
•
Unplug the power cable after the cooling fans stop.
Move the projector to a cooler location if the room where you are presenting is particularly too warm.
Clean the ventilation holes if they are clogged with dust.
Wait about 60 minutes until the inside of the projector becomes cool enough.
1ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
→
problem
Check These Items
Does not turn on
•
Check that the power cable is plugged in and that the power button on the projector cabinet or the remote
•
•
Check to see if the projector has overheated. If there is insufficient ventilation around the projector or if the
room where you are presenting is particularly warm, move the projector to a cooler location.
Check to see if you continue to use the projector for another 600 hours after the lamp has reached the end
of its life. If so, replace the lamp.
•
•
•
The lamp may fail to light. Wait a full minute and then turn on the power again.
Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1600
meters or higher. Using the projector at altitudes approximately 5500 feet/1600 meters or higher without
setting to [HIGH ALTITUDE] can cause the projector to overheat and the projector could shut down. If this
Also when the lamp is turned off, the projector internal temperature is hot. If the power is turned on before
the projector has cooled down, the fan will run a short time before the lamp will turn on.
Will turn off
No picture
•
•
Use the SOURCE button on the projector cabinet or the VIDEO, the S-VIDEO, the COMPUTER 1, the COM-
PUTER 2, the HDMI, the VIEWER or the NETWORK button on the remote control to select your source. (→
•
•
•
•
•
•
•
Ensure your cables are connected properly.
Remove the lens cap.
Reset the settings or adjustments to factory preset levels using the Reset in the Menu. (→ page 113)
Be sure to connect the projector and notebook PC while the projector is in standby mode and before turn-
ing on the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the projector
before being powered up.
* If the screen goes blank while using your remote control, it may be the result of the computer’s screen-
saver or power management software.
•
See also the next page.
Color tone or hue is
unusual
•
•
Check if an appropriate color is selected in [WALL COLOR]. If not, select an appropriate option. (→ page 86)
Image isn’t square to
the screen
•
•
Picture is blurred
•
•
•
Ensure that the distance between the projector and screen is within the adjustment range of the lens. (→
•
•
Condensation may form on the lens if the projector is cold, brought into a warm place and is then turned
on. Should this happen, let the projector stand until there is no condensation on the lens.
Flicker appears on
screen
Set [FAN MODE] to other than [HIGH ALTITUDE] mode when using the projector at altitudes approximately
5500 feet/1600 meters or lower. Using the projector at altitudes less than approximately 5500 feet/1600
meters and setting to [HIGH ALTITUDE] can cause the lamp to overcool, causing the image to flicker.
Image is scrolling
vertically, horizontally or
both
•
•
Use the SOURCE button on the projector cabinet or the VIDEO, the S-VIDEO, the COMPUTER 1, the COM-
PUTER 2, the HDMI, the VIEWER or the NETWORK button on the remote control to select your source (Video,
Adjust the computer image manually with the [CLOCK]/[PHASE] in [ADJUST] → [IMAGE OPTIONS]. (→ page 78)
Remote control does
not work
•
•
•
•
Make sure there are no obstacles between you and the projector.
Check if one or more remote sensors are enabled. Select [SETUP] → [INSTALLATION] → [REMOTE SEN-
Make sure that the remote control’s ID corresponds with the projector’s ID.
•
•
Indicator is lit or blink-
ing
Vertical stripes in RGB
mode
•
Press the AUTO ADJUST button on the projector cabinet or the AUTO ADJ. button on the remote control. (→
•
•
Adjust the computer image manually with the [CLOCK]/[PHASE] in [ADJUST] → [IMAGE OPTIONS]. (→ page 78)
USB mouse does not
work
The projector may not support some brands of a USB mouse.
Some menu items cannot be operated with a USB mouse.
•
For more information contact your dealer.
1ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
If there ꢀs no pꢀcture, or the pꢀcture ꢀs not dꢀsplayed correctly.
•
Power on process for the projector and the PC.
Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on
the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the projector before
being powered up.
NOTE: You can check the horizontal frequency of the current signal in the projector’s menu [SOURCE(2)] under Information.
If it reads “0kHz”, this means there is no signal being output from the computer. See page 111 or go to next step.
•
Enabling the computer’s external display.
Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projec-
tor. When using a PC compatible laptop, a combination of function keys will enable/disable the external display.
Usually, the combination of the ‘Fn” key along with one of the 12 function keys gets the external display to come
on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle
through external display selections.
•
•
Non-standard signal output from the computer
If the output signal from a notebook PC is not an industry standard, the projected image may not be displayed
correctly. Should this happen, deactivate the notebook PC’s LCD screen when the projector display is in use.
Each notebook PC has a different way of deactivate/reactivate the local LCD screens as described in the previ-
ous step. Refer to your computer’s documentation for detailed information.
Image displayed is incorrect when using a Macintosh
When using a Macintosh with the projector, set the DIP switch of the Mac adapter (not supplied with the projec-
tor) according to your resolution. After setting, restart your Macintosh for the changes to take affect.
For setting display modes other than those supported by your Macintosh and the projector, changing the DIP
switch on a Mac adapter may bounce an image slightly or may display nothing. Should this happen, set the DIP
switch to the 13” fixed mode and then restart your Macintosh. After that, restore the DIP switches to a display-
able mode and then restart the Macintosh again.
NOTE: A Video Adapter cable manufactured by Apple Inc. is needed for a PowerBook which does not have a mini D-Sub
15-pin connector.
•
•
Mirroring on a PowerBook
* When using the projector with a Macintosh PowerBook, output may not be set to 1024 x 768 unless “mirroring”
is off on your PowerBook. Refer to owner’s manual supplied with your Macintosh computer for mirroring.
Folders or icons are hidden on the Macintosh screen
Folders or icons may not be seen on the screen. Should this happen, select [View]
menu and arrange icons.
[Arrange] from the Apple
→
1ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
Specifications
This section provides technical information about the projector’s performance.
Model Number
VT800
Optꢀcal
LCD Panel
Resolution
0.63 inch LCD with Micro Lens Array (Aspect Ratio 4:3)
1024 x 768 pixels* up to UXGA with scaling technology (up to 1400 x 1050 @ 60 Hz on HDMI)
Manual zoom and focus:
Lens
Zoom Ratio= 1-1.2
F1.70 - 2.07 f= 18.9 - 22.7 mm
Lamp
210W AC (172W in ECO Mode)
Light Output
2700 lumens (approx. 80% in ECO Mode)
Contrast Ratio
(full white: full black)
500:1
Image Size (Diagonal) 21" - 300"/ 0.53 m - 7.62 m
Projection Distance
Projection Angle
29 - 424 inches/0.73 - 10.8 m
Tele: 8.3° - 8.6°/Wide: 9.9° - 10.3°
Electrꢀcal
2 Analog RGB (Mini D-Sub 15P), 1 HDMI (19P), 1 S-Video (Mini DIN 4P), 1 Video (RCA),
2 Stereo Mini Audio, 2 (L/R) RCA Audio
Inputs
Outputs
1 RGB (Mini D-Sub 15P), 1 Stereo Mini Audio
PC Control
USB Port
LAN Port
1 PC Control Port (D-Sub 9P)
1 A Type
RJ-45
NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM,
DTV: 480i, 480p, 720p, 1080i (60Hz), 576i, 576p, 1080i (50Hz), 1080p (50Hz/60Hz)
DVD: Progressive (50/60Hz)
Video Compatibility
Horizontal: 15 kHz to 108 kHz (RGB: 24 kHz or over)
Vertical: 48 Hz to 120 Hz
Scan Rate
Video Bandwidth
RGB: 165MHz (Maximum sampling rate)
Color Reproduction
16.7 million colors simultaneously, Full color
NTSC / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60 / Y, Cb, Cr: 540 TV lines
Horizontal Resolution SECAM: 300 TV lines
RGB: 1024 dots (H) x 768 dots (V)
RS232, IR, LAN
External Control
Sync Compatibility
Built-in Speaker
Power Requirement
Input Current
Separate Sync / Composite Sync / Sync on G
5W (monaural)
100 - 240V AC, 50/60Hz
3.7 - 1.5A
310W in Lamp NORMAL Mode/260W in Lamp ECO Mode/18W in STANDBY Mode/3W in POWER-
SAVING Mode
Power Consumption
* Effective pixels are more than 99.99%.
1ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
mechanꢀcal
Installation
Dimensions
Weight
Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
12.2"(W) x 4.9"(H) x 11.4"(D) (not including protrusions)
310 mm (W) x 125 mm (H) x 289 mm (D) (not including protrusions)
8.2 lbs/3.7 kg
41° to 104°F / 5° to 40°C,
Operational Temperatures : (Eco mode selected automatically at 95° to 104°F/35° to 40°C), 20% to
80% humidity (non-condensing)
Environmental
Considerations
14° to 122°F (-10° to 50°C), 20% to 80% humidity
Storage Temperatures :
(non-condensing)
UL/C-UL Approved (UL 60950-1, CSA 60950-1)
Meets DOC Canada Class B requirements
Meets FCC Class B requirements
Meets AS/NZS CISPR.22 Class B
Meets EMC Di rect ive (EN55022, EN55024, EN61000-3-2,
EN61000-3-3)
Regulations
Meets Low Voltage Directive (EN60950-1, TÜV GS Approved)
For additional information visit:
Global : http://www.nec-pj.com/
For information on our optional accessories, visit our website or see our brochure.
The specifications are subject to change without notice.
1ꢁ4
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
Cabinet Dimensions
A C I N
R
R
L / M O N O
A U D I O I N
L / M O N O
V I D E O I N
P C C O N T R O L
A U D I O O U T
M O N I T O R O U T
A U D I O I N
C O M P O N E N T
C O M P U T E R
2
I N A U D I O I N
C O M P O N E N T I N
C O M P U T E R
1
A U D I O I N
S - V I D E O I N
/
/
B
U S
H D
L A N
S O U R C E
A U T M O A D J U S T 3 D R E F O R
T U A S S T
P
L A M
U S B
S E L E C T
310 (12.2)
71.4 (2.8)
Unit: mm (inch)
1ꢁ5
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
Screen Size and Projection Distance
Throw Distance and Screen Size
The following shows the proper relative positions of the projector and screen. Refer to the table to determine the
position of installation.
screen center
B
D
2.85"/72.3 mm
lens center
screen bottom
C
Projector bottom
Dꢀstance Chart
B = Vertical distance between lens center and screen center
C = Throw distance
D = Vertical distance between lens center and screen bottom (top of screen for ceiling application)
α
= Throw angle
NOTE: Distances may vary +/-5%.
Screen Size
Diagonal Width Height
C
a
Screen Size
Diagonal Width Height
C
a
B
D
B
D
Wide – Tele
inch
Wide – Tele
degree
Wide – Tele
mm
Wide – Tele
degree
inch
21
inch
17
inch
13
15
18
24
36
43
48
50
54
60
72
90
108
120
126
144
162
180
inch
inch
mm
533
mm
427
mm
320
381
457
610
914
mm
110
130
160
mm
-50
-60
-70
4
5
6
8
–
28
34
46
70
84
93
98
105
117
141
176
211
235
247
282
318
353
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
29
34
41
56
84
-2
-2
-3
-4
-6
-7
-8
-8
-8
–
10.3
10.2
10.1
10.1
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
9.9
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
8.6
8.6
8.5
8.4
8.4
8.4
8.4
8.4
8.4
8.3
8.3
8.3
8.3
8.3
8.3
8.3
8.3
8.3
–
720
870
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
730
870
–
10.3
10.2
10.1
10.1
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
9.9
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
8.6
8.6
8.5
8.4
8.4
8.4
8.4
8.4
8.4
8.3
8.3
8.3
8.3
8.3
8.3
8.3
8.3
8.3
25
30
20
24
635
762
1016
508
610
813
1050
1410
2130
2560
2850
2990
3210
3570
4290
5370
6450
7170
7530
8610
9690
10770
40
32
210 1170
310 1770
380 2130
420 2370
440 2490
470 2670
520 2970
630 3570
790 4470
940 5370
-100
-140
-170
-190
-200
-210
-240
-290
-360
-430
-480
-500
-570
-640
-710
60
48
12
15
17
17
19
21
25
31
37
41
43
50
56
62
1524 1219
72
58
101
112
118
126
141
169
211
254
282
296
339
381
424
1829 1463 1097
2032 1626 1219
2134 1707 1280
2286 1829 1372
2540 2032 1524
3048 2438 1829
3810 3048 2286
4572 3658 2743
5080 4064 3048 1050 5970
5334 4267 3200 1100 6270
6096 4877 3658 1260 7170
6858 5486 4115 1410 8070
7620 6096 4572 1570 8970
80
64
84
67
90
72
100
120
150
180
200
210
240
270
300
80
96
-9
-11
-14
-17
-19
-20
-23
-25
-28
120
144
160
168
192
216
240
9.9
9.9
9.9
9.9
1ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
This section should be used when considering the distance to the screen and the screen size.
Available projection distances are 0.73 m/29 inches for 21" screen to 10.8 m/424 inches for 300" screen, according
to the chart.
(Model)
300
240
Wide
200
180
Screen size
Tele
150
(Diagonal)
120
100
80
60
40
21
30
0
1
2
3
4
5
6
7
8
9
10
11(m)
Throw distance
When tilted at an angle 10 in Wide
Wide
Tele
(m)
5
4
3
2
1
Vertical distance
between projector
foot and screen top
Screen center line (Wide)
Screen center line (Tele)
0
Projector foot
-1
1
2
3
4
5
6
7
8
9
10
11(m)
Usꢀng the Chart
Example for 100" screen:
The projection distance is approximately 3.0 m (120") according to the upper chart.
The lower chart shows that the vertical distance between the projector foot and the screen top is approximately 1.35
m (53"). The projection angle can be adjusted up to 10°. (The lower chart shows that the projector is placed in a
horizontal position)
1ꢁ7
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
Pin Assignments of D-Sub COMPUTER 1/2 Input Connector
Mini D-Sub 15 Pin Connector
Signal Level
5
4
3
2
1
Video signal : 0.7Vp-p (Analog)
Sync signal : TTL level
10
9
8
7
6
15 14 13 12 11
pꢀn No.
RGb Sꢀgnal (Analog)
YCbCr Sꢀgnal
1
2
Red
Cr
Y
Green or Sync on Green
Blue
3
Cb
4
Ground
5
Ground
6
Red Ground
Cr Ground
Y Ground
Cb Ground
7
Green Ground
Blue Ground
8
9
No Connection
Sync Signal Ground
No Connection
Bi-directional DATA (SDA)
Horizontal Sync or Composite Sync
Vertical Sync
10
11
12
13
14
15
Data Clock
1ꢁ8
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
Compatible Input Signal List
Signal
Resolution
( Dots )
Frequency H.
( kHz )
Refresh Rate
( Hz )
NTSC
–
–
–
–
15.73
15.63
15.73
15.63
31.47
31.48
35.00
37.86
37.50
39.38
43.27
35.16
37.88
48.08
46.88
53.67
49.72
48.36
56.48
60.24
60.02
68.68
67.50
61.80
60.00
63.98
69.87
–
60.00
PAL
50.00
PAL60
60.00
SECAM
VESA
50.00
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
640
480
59.94
IBM
640 480
640 480
640 480
640 480
640 480
640 480
800 600
800 600
800 600
800 600
800 600
832 624
1024 768
1024 768
1024 768
1024 768
1024 768
1152 864
1152 900
1280 960
1280 1024
1280 1024
1400 1050
1600 1200
1600 1200
1600 1200
1600 1200
1920 1080
1920 1080
1920 1080
1920 1080
1280 720
1280 720
–
59.95
MAC
66.67
VESA
72.81
VESA
75.00
IBM
75.00
VESA
85.01
VESA
56.25
VESA
60.32
VESA
72.19
VESA
75.00
VESA
85.06
MAC
74.55
VESA
60.00
VESA
70.07
MAC
74.93
VESA
75.03
VESA
85.00
VESA
75.00
SUN
65.95
VESA
60.00
VESA
60.02
MAC
65.18
D
SXGA+
VESA
60.00
75.00
81.25
87.50
93.75
67.50
56.25
33.75
28.13
45.00
37.50
31.25
31.47
15.73
15.63
60.00
VESA
65.00
VESA
70.00
VESA
75.00
D
D
D
D
D
D
D
D
HDTV (1080p)
HDTV (1080p)
HDTV (1080i)(1125i)
HDTV (1080i)(1125i)
HDTV (720p)(750p)
HDTV (720p)
SDTV(576p)(625p)
SDTV (480p)(525p)
DVD YCbCr
DVD YCbCr
60.00 Progressive
50.00 Progressive
60.00 Interlace
50.00 Interlace
60.00 Progressive
50.00 Progressive
50.00 Progressive
59.94 Progressive
59.94 Interlaced
50.00 Interlaced
–
–
–
D: Images above flagged with “D” are supported by digital signal.
NOTE:
• An image with higher or lower resolution than the projector’s native resolution (1024 x 768) will be displayed with scaling tech-
nology.
• Some composite sync signals may not be displayed correctly.
Signals other than those specified in the table above may not be displayed correctly. If this should happen, change the refresh
rate or resolution on your PC. Refer to Display Properties help section of your PC for procedures.
1ꢁ9
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
PC Control Codes and Cable Connection
PC Control Codes
Function
Code Data
POWER ON
02H
02H
02H
02H
02H
02H
02H
02H
02H
02H
02H
02H
02H
02H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
02H
02H
02H
02H
02H
02H
00H
00H
00H
00H
00H
00H
02H
03H
01H
01H
01H
01H
01H
01H
12H
13H
14H
15H
16H
17H
POWER OFF
01H
03H
03H
03H
03H
03H
03H
10H
11H
12H
13H
14H
15H
INPUT SELECT COMPUTER 1
INPUT SELECT COMPUTER 2
INPUT SELECT HDMI
INPUT SELECT VIDEO
INPUT SELECT S-VIDEO
INPUT SELECT VIEWER
PICTURE MUTE ON
PICTURE MUTE OFF
SOUND MUTE ON
SOUND MUTE OFF
ON SCREEN MUTE ON
ON SCREEN MUTE OFF
ASPECT RATIO (4:3 Screen)
4:3
01H
02H
1AH
06H
0BH
1FH
09H
0AH
22H
0EH
13H
27H
03H
03H
03H
03H
10H
10H
10H
10H
00H
00H
00H
00H
00H
00H
00H
00H
05H
05H
05H
05H
18H
18H
18H
18H
00H
00H
00H
00H
00H
00H
00H
00H
00H
01H
02H
03H
00H
00H
00H
00H
30H
31H
32H
33H
LETTERBOX
WIDESCREEN
zOOM
ASPECT RATIO (16:9 Screen)
4:3 WINDOW
03H
03H
03H
03H
10H
10H
10H
10H
00H
00H
00H
00H
00H
00H
00H
00H
05H
05H
05H
05H
18H
18H
18H
18H
00H
00H
00H
00H
00H
00H
00H
00H
00H
01H
02H
04H
00H
00H
00H
00H
30H
31H
32H
34H
LETTERBOX
WIDESCREEN
4:3 FILL
ASPECT RATIO (RGB)
4:3
03H
03H
03H
03H
03H
02H
10H
10H
10H
10H
10H
0FH
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
05H
05H
05H
05H
05H
02H
18H
18H
18H
18H
18H
05H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
18H
00H
02H
0BH
0CH
0DH
00H
00H
00H
00H
00H
30H
32H
3BH
3CH
3DH
16:9
5:4
16:10
15:9
AUTO ADJUST
NOTE: Contact your local dealer for a full list of PC Control Codes if needed.
1ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
Cable Connection
Communication Protocol
Baud rate.......................................... 38400 bps
Data length....................................... 8 bits
Parity................................................ No parity
Stop bit ............................................ One bit
X on/off ............................................ None
Communications procedure............. Full duplex
NOTE: Depending on the equipment, a lower baud rate may be recommended for long cable runs.
PC Control Connector (D-SUB 9P)
to txd of PC
to rxd of PC
to gnd of PC
1
2
3
4
5
6
7
8
9
to rts of PC
to Cts of PC
NOTE 1: Pins 1, 4, 6 and 9 are no used.
NOTE 2: Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
NOTE 3: For long cable runs it is recommended to set communication speed within projector menus to 9600 bps.
1ꢂ1
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
Troubleshooting Check List
Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by
referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your prob-
lem more efficiently.
* Print the following pages.
Frequency of occurrence always sometimes (How often?_____________________) other (__________________)
power
No power (POWER indicator does not light green) See also
“Status Indicator (STATUS)”.
Shut down during operation.
Power cable’s plug is fully inserted into the wall outlet.
Lamp cover is installed correctly .
Power cable’s plug is fully inserted into the wall outlet.
Main power switch is pressed to the ON position.
Lamp cover is installed correctly .
Auto Power Off is turned off (only models with the Auto
Power Off function).
Lamp Hours Used (lamp operation hours) was cleared after
lamp replacement.
Off Timer is turned off (only models with the Off Timer func-
tion ).
No power even though you press and hold the POWER but-
ton for a minimum of 2 seconds.
PROGRAM TIMER is turned off (only models with the Pro-
gram Timer function.)
Video and audio
No image is displayed from your PC or video equipment to the
projector.
Parts of the image are lost.
Still unchanged even though you press the AUTO ADJUST
button.
Still no image even though you connect the projector to the
PC first, then start the PC.
Still unchanged even though you carry out [RESET] in the
projector’s menu.
Enabling your notebook PC’s signal output to the projector.
•
A combination of function keys will enable/disable the
external display. Usually, the combination of the “Fn” key
along with one of the 12 function keys turns the external
display on or off.
Image is shifted in the vertical or horizontal direction.
Horizontal and vertical positions are correctly adjusted on a
computer signal.
Input source’s resolution and frequency are supported by the
projector.
No image (blue background, logo, no display).
Still no image even though you press the AUTO ADJUST but-
ton.
Some pixels are lost.
Image is flickering.
Still no image even though you carry out [RESET] in the pro-
jector’s menu.
Still unchanged even though you press the AUTO ADJUST
button.
Signal cable’s plug is fully inserted into the input connector
Still unchanged even though you carry out [RESET] in the
projector’s menu.
A message appears on the screen.
( _____________________________________________ )
Image shows flickering or color drift on a computer signal.
The source connected to the projector is active and available.
Still unchanged even though you change [FAN MODE] from
[HIGH ALTITUDE] to [AUTO].
Still no image even though you adjust the brightness and/or
the contrast.
Image appears blurry or out of focus.
Input source’s resolution and frequency are supported by the
projector.
Still unchanged even though you checked the signal’s resolu-
tion on PC and changed it to projector’s native resolution.
Image is too dark.
Still unchanged even though you adjusted the focus.
No sound.
Remains unchanged even though you adjust the brightness
and/or the contrast.
Audio cable is correctly connected to the audio input of the
projector.
Image is distorted.
Image appears to be trapezoidal (unchanged even though
you carry out the [KEySTONE] or [3D REFORM] adjustment).
Still unchanged even though you adjusted the volume level.
AUDIO OUT is connected to your audio equipment (only
models with the AUDIO OUT connector).
other
Remote control does not work.
Buttons on the projector cabinet do not work ( only models with
the Control Panel Lock function).
No obstacles between the sensor of the projector and the
remote control.
Control Panel Lock is not turned on or is disabled in the menu.
Projector is placed near a fluorescent light that can disturb
the infrared remote controls.
Still unchanged even though you press and hold the EXIT
button for a minimum of 10 seconds.
Batteries are new and are not reversed in installation.
If present on the remote control, projector selector switch is
not used.
1ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
In the space below please describe your problem in detail.
Information on application and environment where your projector is used
projector
Installatꢀon envꢀronment
Screen size:
Model number:
inch
Serial No.:
Screen type: White matte Beads Polarization
Date of purchase:
Lamp operating time (hours):
Lamp Mode:
Wide angle High contrast
Throw distance:
feet/inch/m
Normal Eco
Orientation: Ceiling mount Desktop
Power outlet connection:
Information on input signal:
Horizontal synch frequency
Vertical synch frequency
Synch polarity
[
[
] kHz
] Hz
Connected directly to wall outlet
Connected to power cord extender or other (the
number of connected equipment______________)
H (+) (–)
Connected to a power cord reel or other (the num-
V (+) (–)
ber of connected equipment______________)
Synch type
Separate Composite
Sync on Green
Computer
STATUS Indicator:
Steady light
Manufacturer:
Orange Green
Model number:
Notebook PC / Desktop
Native resolution:
Refresh rate:
Flashing light
[
] cycles
Remote control model number:
Video adapter:
Other:
Projector
PC
dVd player
Vꢀdeo equꢀpment
Sꢀgnal cable
VCR, DVD player, Video camera, Video game or other
NEC standard or other manufacturer’s cable?
Model number:
Distribution amplifier
Model number:
Switcher
Length:
inch/m
Manufacturer:
Model number:
Model number:
Adapter
Model number:
1ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
5) Problems or damage caused by use in hot or humid places, in
TravelCare Guide
vehicles, boats or ships, etc.
6) Problems or damage caused by expendable supplies or de-
vices connected to the product other than those designated by
neC.
TravelCare - a service for international travelers
This product is eligible for “TravelCare”, NEC’s unique international
warranty.
Please note that TravelCare coverage differs in part from coverage
under the warranty included with the product.
7) Problems caused by natural consumption, wear or deteriora-
tion of parts under normal usage conditions.
8) Problems or damage to lamps and other expendable supplies,
Services offered with TravelCare
included parts or optional parts.
This warranty allows customers to receive service on their product at
the NEC and NEC-designated service stations in the countries listed
herein when temporarily traveling internationally for business or plea-
sure.
For details on services offered by the different service stations, please
refer to the “List of TravelCare Outlets” below.
9) Other conditions stipulated in the warranty included with the
product also apply.
NOTE: The product can be used overseas with voltages of 100 to 120V and
200 to 240V by using a power cable suited for the standards and power source
voltage of the country in which the product is being used.
1 Repaꢀr servꢀces
The product will be repaired and delivered within 10 business days,
List of TravelCare Outlets
not including shipping time.
This list applies as of October 1, 2007.
During the term of warranty, the cost of maintenance parts, labor
costs for repairs and shipping costs within the service station’s cov-
erage area are covered by the warranty.
For the most up-to-date information, please refer to the websites of
the service stations in the various countries on the List of TravelCare
ꢁ Replacement product rental servꢀce
If the customer desires, he or she can rent a replacement product
while the original product is being repaired.
Fee: US$200 for 12 days
This fee must be paid at the local service station in cash or credit
card.
The US$200 rental fee is non-refundable even if the customer rents
it less than 12 days before returning.
In Europe
NEC Europe, Ltd. / European Technical Centre
Address:
Telephone:
Fax Line:
Email Address:
WEB Address:
Unit G, Stafford Park 12, Telford TF3 3BJ, U.K.
+44 1952 237000
+44 1952 237006
The replacement product will be delivered within 3 business days.
If the customer did not return the replacement product within 12
days, the customer will be charged the price of the unit.
If the customer returned the replacement product in a faulty or
damaged condition, the repair cost will be charged to the customer.
Note that this service is not offered in all countries and regions.
Please refer to the “List of TravelCare Outlets”.
(Regions Covered)
EU:
Austria*, Belgium*, Denmark*, Finland*, France*, Germany*,
Greece*, Ireland*, Italy*, Luxembourg*, The Netherlands*,
Portugal*, Spain*, Sweden* and the United Kingdom*
Norway*, Iceland and Liechtenstein
EEA:
In North Amerꢀca
NEC Display Solutions of America, Inc.
Address:
In addition, this replacement product rental service is not offered
after the product’s warranty has expired.
500 Park Boulevard, Suite 1100
Itasca, Illinois 60143, U.S.A.
+1 800 836 0655
+1 800 356 2415
Term of warranty
Telephone:
Fax Line:
Email Address:
WEB Address:
1
a. Upon presentation of the warranty or receipt received upon
purchase:
(Regions Covered)
U.S.A. *, Canada*
Valid for the term indicated on the warranty or the normal term
of warranty for the country of purchase.
b. When only the product is brought in:
In Oceanꢀa
NEC Australia Pty., Ltd.
Address:
Valid for a period of within 14 months of the date of manufac-
ture indicated by the serial number attached to the product.
New South Wales;
2 When a product whose term of warranty is expired is brought in:
184 Milperra Road, Reversby NSW 2212
Telephone: +61 2 9780 8688 Fax Line: +61 2 9780 8659
Victoria;
Repairs will be offered for a fee. In this case the customer is not
eligible for the replacement product rental service.
3 In the following cases, repairs may be charged, even if the product’
s warranty is still in effect:
Unit 1/6 Garden Road, Clayton VIC 3168
Telephone: +61 3 8562 6245 Fax Line: +61 3 8562 6220
Newcastle;
1) if the term of warranty, model name, serial number and name
of the store of purchase are not indicated on the warranty or
have been altered.
120 Parry Street Newcastle West NSW 2300
Telephone: +61 2 4926 2466
Queensland;
2) Problems or damage caused by dropping or shocks during
shipment or movement by the customer or by improper han-
dling by the customers.
Unit 4/305 Montague Road West End QLD 4101
Telephone: +61 7 3840 5858 Fax Line: +61 7 3840 5866
Goldcoast QLD;
3) Problems or damage caused by improper usage or unwarrant-
Shop1 48 Ferry Road Southport QLD 4215
Telephone: +61 7 5591 3670
able alterations or repairs by the customer.
South Australia;
4) Problems or damage caused by fire, salt damage, gas dam-
age, earthquakes, lightning damage, storm or flood damage or
other natural disasters or such external factors as dust, ciga-
rette smoke, abnormal voltage, etc.
84A Richmond Road, Keswick SA 5035
Telephone: +61 8 8375 5707 Fax Line: +61 8 8375 5757
Western Australia;
45 Sarich Court Osborne Park WA 6017
Telephone: +61 8 9445 5901 Fax Line: +61 8 9445 5999
1ꢂ4
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
WEB Address: http://www.nec.com.au
Hyosung ITX Co., Ltd.
Address:
2nd Fl., Ire B/D. #2, 4Ga, Yangpyeng-Dong,
Youngdeungpo-Gu, Seoul, Korea 150-967
+82 2 2163 4193
(Regions Covered)
Australia*, New Zealand
Telephone:
Fax Line:
+82 2 2163 4196
In Asꢀa and mꢀddle East
Email Address:
NEC Display Solutions, Ltd.
Address:
686-1, Nishioi, Oi-Machi, Ashigarakami-Gun,
Kanagawa 258-0017, Japan
+81 465 85 2369
(Regions Covered)
South Korea
Telephone:
Fax Line:
+81 465 85 2393
Lenso Communication Co., Ltd.
Email Address:
WEB Address:
Address:
292 Lenso House 4, 1st Floor, Srinakarin Road,
Huamark, Bangkapi, Bangkok 10240, Thailand
+66 2 375 2425
Telephone:
(Regions Covered)
Japan*
Fax Line:
Email Address:
WEB Address:
+66 2 375 2434
NEC Solutions (China) Co.,Ltd.
Address:
Rm 1903, Shining Building, 35 Xueyuan Rd,
Haidian District Beijing 100083, P.R.C.
+8610 82317788
+8610 82331722
(Regions Covered)
Thailand
Telephone:
Fax Line:
Email Address:
ABBA Electronics L.L.C.
Address:
Tariq Bin Ziyad Road, P.O.Box 327, Dubai,
United Arab Emirates
+971 4 371800
WEB Address:
Telephone:
Fax Line:
+971 4 364283
(Regions Covered)
China
Email Address:
(Regions Covered)
NEC Hong Kong Ltd.
Address:
United Arab Emirates
25/F.,The Metropolis Tower, 10 Metropolis Drive,
Hunghom, Kowloon, Hong Kong
+852 2369 0335
Samir Photographic Supplies
Telephone:
Fax Line:
Email Address:
Address:
P.O.Box 599, Jeddah 21421, Saudi Arabia
+852 2795 6618
Telephone:
Fax Line:
+966 2 6828219
+966 2 6830820
Email Address:
WEB Address:
Riyadh
(Regions Covered)
Hong Kong
Address:
Telephone:
Fax Line:
P.O.Box 5519, Riyadh 11432, Saudi Arabia
+966 1 4645064
+966 1 4657912
NEC Taiwan Ltd.
Address:
Email Address:
7F, No.167, SEC.2, Nan King East Road, Taipei,
Taiwan, R.O.C.
Alkhobar
Telephone:
Fax Line:
Email Address:
WEB Address:
+886 2 8500 1714
+886 2 8500 1420
Address:
Telephone:
Fax Line:
P.O.Box 238, Alkhobar 31952, Saudi Arabia
+966 3 8942674
+966 3 8948162
Email Address:
(Regions Covered)
Taiwan
(Regions Covered)
Saudi Arabia
NEC Asia Pte.Ltd.
Address:
NOTE: In countries designated with an asterisk(*), replacement product rental
service are offered.
401 Commonwealth Drive, #07-02, Haw Par
Technocentre, Singapore 149598
+65 6 273 8333
Telephone:
Fax Line:
+65 6 274 2226
Email Address:
WEB Address:
(Regions Covered)
Singapore
NEC Systems Integration Malaysia Sdn Bhd
Address:
Ground Floor, Menara TA One, 22, Jalan P. Ramlee,
50250 Kuala Lumpur, Malaysia
+6 03 2178 3600 (ISDN)
+6 03 2178 3789
Telephone:
Fax Line:
Email Address:
WEB Address:
(Regions Covered)
Malaysia
1ꢂ5
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
P-1/
,
Date:
/
/
,
TO: NEC or NEC’s Authorꢀzed Servꢀce Statꢀon:
Fm:
(Company & Name with signature)
Dear Sir (s),
I would like to apply your TravelCare Service Program based on attached registration and qualification sheet and agree with
your following conditions, and also the Service fee will be charged to my credit card account, if I don’t return the Loan units
within the specified period. I also confirm following information is correct. Regards.
Application Sheet for TravelCare Service Program
Country,
product purchased :
User’s Company Name :
User’s Company Address :
Phone No., Fax No. :
User’s Name :
User’s Address :
Phone No., Fax No. :
Local Contact office :
Local Contact office Address :
Phone No., Fax No. :
User’s Model Name :
Date of Purchase :
Serial No. on cabinet :
Problem of units per User :
Required Service :
(1) Repair and Return
(1) Credit Card
(2) Loan unit
Requested period of Loan unit :
Payment method :
(2) Travelers Cheque
(3) Cash
In Case of Credit Card :
Card No. w/Valid Date :
1ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Appendix
5. Loan Servꢀce Charges and Condꢀtꢀons:
Upon acceptance of this NEC Projector, Customer agrees to assume
liability for this loan unit.
Condition of your TravelCare Service Program
Enduser is requested to understand following condition of TravelCare
Service Program and complete the necessary information on the ap-
plication sheet.
The current cost of use of this loan unit is $200.00 USD for 12 calen-
dar days.
1. Servꢀce Optꢀons:
There are 3 types of “Service” available. Enduser has to understand
following condition and is required to fill in the Application Sheet.
If Customer does not return the unit within the 12 calendar days, Cus-
tomer will be charged the next highest cost up to and including the full
list price to Credit Cards, which price will be informed by NEC Autho-
rized Service Stations. Please see the attached listing of contacts for
each country to arrange for pickup of the loan unit.
1) Repair and Return:
The ’Faulty unit’ is sent or collected from the customer. It is repaired
and returned within 10 days to the customer, excluding transport
time.
If you return to their country of origin with the loan unit, you will be
charged additional freight to return the unit to the loaning country.
There may have a case, repair and return can’t be done by NEC
Authorized Service Station, because of shortage of spare parts due
to same model is not sold in the territory.
Thank you for your understanding of this program.
2) Repair and Return with Loan: (This service is limited to some Ser-
vice Stations)
This service is offered to the Enduser, who cannot wait until their
unit is repaired.
The customer can borrow a unit for $200 up to 12 days. Customer
then sends in inoperable unit to nearest NEC Authorized Service
Station for service. In order to prevent collection problem, Enduser
is required to fill in Application Sheet.
Enduser needs to confirm the availability of the Service to NEC Au-
thorized Service Stations.
3) Loan Only:
For this service, NEC Authorized Service Station supplies the cus-
tomer with a loan unit for US$200 up to 12 days. Customer keeps
the inoperable unit and when customer returns home, customer
arranges to have the projector serviced in the home country.
ꢁ. Warranty Exclusꢀons:
This program does not apply if the Projector’s serial number has been
defaced, modified or removed.
If, in the judgement of NEC Authorized Service Station or its agent the
defects or failures result from any cause other than fair wear and tear
or NEC neglect, or fault including the following without limitation:
1) Accidents, transportation, neglect, misuse, abuse, water, dust,
smoke or default of or by the Customer its employees or agents or
any third party;
2) Failure or fluctuation of electrical power, electrical circuitry, air con-
ditioning, humidity control or other environmental conditions such
as use it in smoking area;
3) Any fault in the attachments or associated products or components
(whether or not supplied by NEC or its agents which do not form
part of the Product covered by this warranty);
4) Any act of God, fire, flood, war, act of violence or any similar occur-
rence;
5) Any attempt by any person other than any person authorized by
NEC to adjust, modify, repair, install or service the product.
6) Any Cross-border charges such as, duty, insurance, tax etc.
ꢂ. Charges for Warranty Exclusꢀons and Out of Warranty Case:
In case faulty unit is under warranty exclusions case or under Out of
Warranty period, NEC Authorized Service Station will Inform estima-
tion of actual service cost to the Enduser with reason.
4. Dead on Arrꢀval (DOA):
Enduser must take this issue up with their original supplier in the
country of purchase.
NEC Authorized Service Station will repair the DOA unit as a Warranty
repair, but will not exchange DOA unit with new units.
Ver. 1 02/08
1ꢂ7
Download from Www.Somanuals.com. All Manuals Search And Download.
|