Multiquip Welder SP6457 User Manual
PARTS MANUAL  
StreetPro SERIES  
MODEL SP6457  
PROFESSIONAL PAVEMENT SAW  
(DEUTZ 57 HP DIESEL ENGINE)  
Revision #3 (11/29/10)  
To find the latest revision of this  
publication, visit our website at:  
www.multiquip.com  
THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALLTIMES.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SILICOSIS/RESPIRATORYWARNINGS  
WARNING WARNING  
SILICOSIS WARNING  
RESPIRATORY HAZARDS  
Grinding/cutting/drilling of masonry, concrete, metal and  
other materials with silica in their composition may give  
off dust or mists containing crystalline silica. Silica is a  
basic component of sand, quartz, brick clay, granite and  
numerous other minerals and rocks. Repeated and/or  
substantial inhalation of airborne crystalline silica can  
cause serious or fatal respiratory diseases, including  
silicosis. In addition, California and some other  
authorities have listed respirable crystalline silica as a  
substance known to cause cancer. When cutting such  
materials, always follow the respiratory precautions  
mentioned above.  
Grinding/cutting/drilling of masonry, concrete, metal and  
other materials can generate dust, mists and fumes  
containing chemicals known to cause serious or fatal  
injury or illness, such as respiratory disease, cancer,  
birth defects or other reproductive harm. If you are  
unfamiliar with the risks associated with the particular  
process and/or material being cut or the composition of  
the tool being used, review the material safety data  
sheet and/or consult your employer, the material  
manufacturer/supplier, governmental agencies such as  
OSHA and NIOSH and other sources on hazardous  
materials. California and some other authorities, for  
instance, have published lists of substances known to  
cause cancer, reproductive toxicity, or other harmful  
effects.  
Control dust, mist and fumes at the source where  
possible. In this regard use good work practices and  
follow the recommendations of the manufacturers or  
suppliers, OSHA/NIOSH, and occupational and trade  
associations. Water should be used for dust  
suppression when wet cutting is feasible. When the  
hazards from inhalation of dust, mists and fumes cannot  
be eliminated, the operator and any bystanders should  
always wear a respirator approved by NIOSH/MSHA for  
the materials being used.  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Bladeguard (16-36") Assembly .......................... 64-65  
Bladeguard (42") Assembly ............................... 66-67  
Bladeguard (48") Assembly ............................... 68-69  
Bladeguard Mount/Wiper Assembly .................. 70-71  
Depth Stop Meter/Cable Assembly.................... 72-73  
Depth Stop Cylinder/Valve Assembly................. 74-75  
Front Axle Assembly .......................................... 76-77  
Cable Mount Assembly ...................................... 78-79  
Wiring Harness/Circuit Breaker Assy. ................ 80-81  
Water Pump Kit Assembly.................................. 82-83  
Gearbox Seal Kit Assembly ............................... 84-85  
Bushing Extension Kits Assembly ...................... 86-87  
Collar/Flange Puller Assy. (Option) .................... 88-89  
Seal Sleeve Puller Assy. (Option)....................... 90-91  
Tools ................................................................... 92-93  
SP6457 StreetPro  
Professional Pavement Saw  
Proposition 65 Warning ............................................. 2  
Silicosis/RespiratoryWarnings .................................. 3  
Table Of Contents ..................................................... 4  
Parts Ordering Procedures ....................................... 5  
Explanation Of Codes In Remarks Column .............. 6  
Suggested Spare Parts ............................................. 7  
Component Drawings  
Console Mounting Assembly ................................. 8-9  
Deck/Gauge Panel Assembly............................. 10-11  
Nameplate and Decals Assembly ...................... 12-13  
Access Panel Assembly ..................................... 14-15  
F-N-R Control and Handle Assembly ................ 16-17  
Joystick Mounting Assembly .............................. 18-19  
Fuel Tank Assembly ........................................... 20-21  
Gauges and Controls Assembly ........................ 22-23  
Engine Assembly ............................................... 24-25  
Air Intake Hose Assembly .................................. 26-27  
Muffler Kit Assembly .......................................... 28-29  
Engine Mounting Assembly ............................... 30-31  
Engine Guard Assembly .................................... 32-33  
Handle and Light Assembly ............................... 34-35  
Light Connector/Dash Panel Assembly.............. 36-37  
Pointer Assembly ............................................... 38-39  
Rear Pointer and Foot Rest Assembly............... 40-41  
Battery Assembly ............................................... 42-43  
Drive Assembly .................................................. 44-45  
Transaxle Mounting/Cam Lever Assy. ............... 46-47  
4-Speed Bladeshaft (Gearbox) Assembly ......... 48-51  
Shifter Assembly ................................................ 52-53  
Gearbox Mounting Assembly............................. 54-55  
Pulley and V-Belt Assembly................................ 56-57  
Belt Guard Assembly ......................................... 58-59  
Lift Pump Circuit Assembly ................................ 60-61  
Water System Assembly .................................... 62-63  
Terms and Conditions of Sale ................................. 94  
PAGE 4 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS ORDERING PROCEDURES  
Ordering parts has never been easier!  
Choose from three easy options:  
Effective:  
January 1st, 2006  
Best Deal!  
Order via Internet (Dealers Only):  
Order parts on-line using Multiquip’s SmartEquip website!  
If you have an MQ Account, to obtain a Username  
and Password, E-mail us at: parts@multiquip.  
com.  
■ View Parts Diagrams  
■ Order Parts  
■ Print Specification Information  
To obtain an MQ Account, contact your  
District Sales Manager for more information.  
Use the internet and qualify for a 5% Discount  
on Standard orders for all orders which include  
complete part numbers.*  
Goto www.multiquip.com and click on  
to log in and save!  
Order Parts  
Note: Discounts Are Subject To Change  
Fax your order in and qualify for a 2% Discount  
on Standard orders for all orders which include  
complete part numbers.*  
Order via Fax (Dealers Only):  
All customers are welcome to order parts via Fax.  
Domestic (US) Customers dial:  
1-800-6-PARTS-7 (800-672-7877)  
Note: Discounts Are Subject To Change  
Domestic (US) Dealers Call:  
Order via Phone:  
1-800-427-1244  
Non-Dealer Customers:  
International Customers should contact  
their local Multiquip Representatives for  
Parts Ordering information.  
Contact your local Multiquip Dealer for  
parts or call 800-427-1244 for help in  
locating a dealer near you.  
When ordering parts, please supply:  
❒
Dealer Account Number  
❒
Specify Preferred Method of Shipment:  
❒
❒
❒
❒
❒
Dealer Name and Address  
✓ UPS/Fed Ex  
✓ DHL  
✓ Truck  
■
■
Priority One  
Ground  
Shipping Address (if different than billing address)  
Return Fax Number  
■ Next Day  
Second/Third Day  
Applicable Model Number  
■
Quantity, Part Number and Description of Each Part  
NOTICE  
All orders are treated as Standard Orders and will  
ship the same day if received prior to 3PM PST.  
WE ACCEPT ALL MAJOR CREDIT CARDS!  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLANATION OF CODE IN REMARKS COLUMN  
The following section explains the different symbols and  
QTY. Column  
remarks used in the Parts section of this manual. Use the  
help numbers found on the back page of the manual if there  
are any questions.  
Numbers Used — Item quantity can be indicated by a  
number, a blank entry, or A/R.  
A/R (As Required) is generally used for hoses or other  
parts that are sold in bulk and cut to length.  
NOTICE  
The contents and part numbers listed in the parts  
section are subject to change without notice.Multiquip  
does not guarantee the availability of the parts listed.  
A blank entry generally indicates that the item is not sold  
separately.Other entries will be clarified in the“Remarks”  
Column.  
SAMPLE PARTS LIST  
REMARKS Column  
NO. PART NO. PART NAME  
QTY. REMARKS  
Some of the most common notes found in the “Remarks”  
Column are listed below. Other additional notes needed  
to describe the item can also be shown.  
1
2%  
12345  
BOLT......................1 .....INCLUDES ITEMS W/%  
WASHER, 1/4 IN............NOT SOLD SEPARATELY  
WASHER, 3/8 IN....1 .....MQ-45T ONLY  
2% 12347  
3
4
12348  
12349  
HOSE ..................A/R ...MAKE LOCALLY  
BEARING ..............1 .....S/N 2345B AND ABOVE  
Assembly/Kit — All items on the parts list with the  
same unique symbol will be included when this item is  
purchased.  
NO. Column  
Indicated by:  
Unique Symbols — All items with same unique  
symbol  
“INCLUDES ITEMS W/(unique symbol)”  
(@, #, +, %, or >) in the number column belong to the  
same assembly or kit, which is indicated by a note in the  
“Remarks” column.  
Serial Number Break — Used to list an effective serial  
number range where a particular part is used.  
Indicated by:  
Duplicate Item Numbers — Duplicate numbers indicate  
multiple part numbers, which are in effect for the same  
general item, such as different size saw blade guards in  
use or a part that has been updated on newer versions  
of the same machine.  
“S/N XXXXX AND BELOW”  
“S/N XXXX AND ABOVE”  
“S/N XXXX TO S/N XXX”  
Specific Model Number Use — Indicates that the part  
is used only with the specific model number or model  
number variant listed. It can also be used to show a  
part is NOT used on a specific model or model number  
variant.  
NOTICE  
When ordering a part that has more than one item  
number listed, check the remarks column for help in  
determining the proper part to order.  
Indicated by:  
“XXXXX ONLY”  
“NOT USED ON XXXX”  
PART NO. Column  
Numbers Used — Part numbers can be indicated by a  
number, a blank entry, or TBD.  
“Make/Obtain Locally” — Indicates that the part can  
be purchased at any hardware shop or made out of  
available items.Examples include battery cables, shims,  
and certain washers and nuts.  
TBD (To Be Determined) is generally used to show a  
part that has not been assigned a formal part number  
at the time of publication.  
“Not Sold Separately”— Indicates that an item cannot  
be purchased as a separate item and is either part of an  
assembly/kit that can be purchased, or is not available  
for sale through Multiquip.  
A blank entry generally indicates that the item is not sold  
separately or is not sold by Multiquip. Other entries will  
be clarified in the “Remarks” Column.  
PAGE 6 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUGGESTED SPARE PARTS  
SP6457 CONCRETE SAW  
1 to 5 Units  
Qty...... P/N ......................... Description  
1 ......... 345008.................... Coupler, Splined  
1 ......... 446010.................... Valve, Cartridge  
1 ......... 560028-5................. Switch Assembly  
1 ......... 521004.................... V-Belt (16", 20" and 26" only)  
1 ......... 521001.................... V-Belt (30" and 36" only)  
1 ......... 521007.................... V-Belt All Models  
2 ......... 520007.................... 5G 3VX 530 drive belt  
1 ......... 300008.................... Primary Air Filter Element  
1 ......... 300009.................... Safety Air Filter Element  
1 ......... 306006.................... Transaxle Hydraulic Filter  
2 ......... 500009.................... Wheel, Rear Axle  
2 ......... 582038.................... Bushing, RearWheel  
2 ......... 180003.................... Outer Flange  
2 ......... 180004.................... Inner Flange  
1 ......... 582012.................... Bushing, Flange  
1 ......... 915316.................... Screw, HHC 5/8-11 x 3 LH Gr8  
1 ......... 915315.................... Screw, HHC 5/8-11 x 3 RH Gr8  
1 ......... 577009.................... Gasket, Drain Plug  
1 ......... 306012.................... Engine Oil Filter, Deutz  
1 ......... 304010.................... Engine Fuel Filter, Deutz  
1 ......... 362002.................... Tube, B.G. Water Delivery R.H.  
1 ......... 362003.................... Tube, B.G. Water Delivery L.H.  
1 ......... 25643 ..................... Relief Check Valve  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONSOLE MOUNTING ASSY.  
PAGE 8 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONSOLE MOUNTING ASSY.  
DECK/GAUGE PANEL ASSY.  
NO  
1
2
3
4
5
6
7#  
7#  
8#  
9
PART NO  
25744  
100048  
16530  
933243  
3214  
933244  
EM963105  
2549  
PART NAME  
QTY.  
REMARKS  
CONSOLE  
1
1
2
2
4
4
3
3
3
FRAME PLATFORM  
SCREW, HHC 7/16-14 X 1  
WASHER, FLAT SAE 7/16 GRD 9 YZ  
SCREW, HHC 1/2-13 X 1-1/4  
WASHER, FLAT SAE 1/2 GRD 9 YZ  
SCREW, HHC 1/2-13 X 2  
SCREW, HHC 1/2-13 X 3  
WASHER, FLAT SAE 1/2 GRD 9 YZ  
933244  
M18011  
OPTIONAL WEIGHT KIT ............................................. 1.................... INCLUDES ITEMS W/#  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DECK/GAUGE PANEL ASSY.  
DECK/GAUGE PANEL ASSY.  
PAGE 10 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DECK/GAUGE PANEL ASSY.  
DECK/GAUGE PANEL ASSY.  
NO  
1
2
PART NO  
600151  
600152  
PART NAME  
GAUGE PANEL  
DECK PANEL  
QTY.  
1
1
REMARKS  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMEPLATE AND DECALS ASSY.  
NAMEPLATE AND DECAL ASSY.  
PAGE 12 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMEPLATE AND DECALS ASSY.  
NAMEPLATE AND DECAL ASSY.  
NO  
1
2
PART NO  
25250-001  
606004  
25782  
PART NAME  
QTY.  
REMARKS  
DECAL, WARNING, KEEP FEET CLEAR  
DECAL, BLADE GUARD REMOVAL  
DECAL, MQ DIAMOND LOGO  
2
2
4
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
21302  
25786  
13118  
35137  
DECAL, WARNING, INSTALL BLADE GUARD ............ 1.............. REPLACES P/N 606004  
DECAL, SP4 LOGO  
2
1
1
1
1
1
2
1
1
1
1
1
DECAL, POWDER COATED  
DECAL, WARNING, READ MANUAL  
DECAL, NAMEPLATE  
1997  
M600002  
22122-001  
25249-001  
23330-001  
25491  
20525  
604001  
25678  
DECAL, DIESEL FUEL ONLY  
DECAL, WARNING, SERIOUS INJURY  
DECAL, WARNING, KEEP HANDS CLEAR  
DECAL, CAUTION, DRIVE BELT  
DECAL, ROTATION, CW  
DECAL, WARNING, PROPOSITION 65  
DECAL, WARNING, INSTALL BELT GUARD  
DECAL, ROTATION, CCW  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESS PANEL ASSY.  
ACCESS PANEL ASSY.  
PAGE 14 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESS PANEL ASSY.  
ACCESS PANEL ASSY.  
NO  
PART NO  
102039  
560020  
12287  
102039-1  
577002  
29057  
10024  
10930  
29093  
PART NAME  
QTY.  
REMARKS  
1
PANEL ASSY., REAR CONSOLE, RED ........................ 1 ................. INCLUDES ITEMS W/  
*
2
*
3
*
4
*
5
*
6
*
7
*
8
*
9
LATCH, REAR SAW ACCESS PANEL  
SCREW, THP 1/4-20 X 3/4" SS  
PANEL, REAR CONSOLE 6000, RED  
WEATHER STRIP, REAR SAW ACCESS PANEL  
DOCUMENT BOX, CP90007-07  
NUT, NYLOCK 1/4-20  
2
4
1
1.75 FT.  
1
4
4
2
WASHER, FENDER, 1/4 X 1-1/4"  
GASKET, TRIMLOCK X-109BT  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F-N-R CONTROL AND HANDLE ASSY.  
F-N-R CONTROL AND HANDLE ASSY.  
PAGE 16 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F-N-R CONTROL AND HANDLE ASSY.  
F-N-R CONTROL AND HANDLE ASSY.  
NO  
1%  
PART NO  
560030  
PART NAME  
QTY.  
REMARK  
F-N-R CONTROL HANDLE ASSY. ....................... 1 ...................... INCLUDES ITEMS W/  
*
2 %  
560028-6  
5600028-8  
560028-4  
560028-3  
560028-5  
560028-1  
60118  
SCREW, #6-32 X 3/8  
WASHER, FLAT #4 NYLON  
RUBBER BOOT  
PLATE, SIDE SWITCH  
SWITCH ASSEMBLY  
HANDLE HOUSING  
WIRE, F-N-R  
5
5
2
1
2
1
1
1
1
*
3 %  
*
4 %  
*
5 %  
*
6 %  
*
7 %  
*
8 %  
*
9 %  
925381  
SCREW, SET 1/4-20 X 3/8  
PLATE, FRONT SWITCH  
*
10 % 560028-2  
*
12  
25627  
405070  
12223  
405046  
6904  
580001  
440006  
120077  
565006  
915003  
584044  
2295  
F-N-R CONTROL ASSY...................................... 1 ...................... INCLUDES ITEMS W/%  
13%  
14%  
15%  
16  
SEAL, WEATHERPACK, RED  
TERMINAL WEATHERPACK  
CONNECTOR, TERMINAL, MALE  
NUT, HEX FINISH 1/4-28 ZINC  
ROD END, 1/4-20 FEMALE RH  
CABLE, CONTROL 40" X 2" STROKE  
MOUNT W/A TRANSAXLE CTRL. CABLE  
SPRING, CTRL. CABLE TENSIONING  
SCREW, HHC 1/4-20 X 3/4 GRD. 8  
RETAINER, FNR CABLE SPRING  
SCREW, HHC 1/4-20 X 7/8  
4
4
4
4
2
1
1
1
1
1
1
1
1
1
1
17  
18  
19  
20  
21  
22  
23  
24  
440005  
933240  
TBD  
PLATE, F-N-R PINTLE CONTROL  
WASHER, FLAT SAE 1/4" GRD. 9  
WASHER  
25  
26  
27  
TBD  
NUT  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JOYSTICK MOUNTING ASSY.  
JOYSTICK MOUNTING ASSY.  
PAGE 18 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JOYSTICK MOUNTING ASSY.  
JOYSTICK MOUNTING ASSY.  
NO  
PART NO  
0161D  
10019  
1579  
2203  
PART NAME  
NUT, HEX FINISH 5/16-18  
NUT, FYLOC #10-32  
SCREW. JJC 1/4-20 X .5  
WASHER, FLAT, #10  
CORD GRIP, SAW FNR CONTROL  
BOOT, FNR CONTROL HANDLE  
SPACER, F-N-R  
BELLCRANK, SAW F-N-R  
PLATE, NEUTRAL DETENT  
F-N-R MOUNTING PLATE  
CONTROL LEVER  
QTY.  
2
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
2
REMARK  
1
*
2
*
3
*
4
*
5
405053  
442005-6  
442006-3  
442011  
442012  
442013  
442021  
442022  
460018  
565005  
584021  
584023  
584024  
926348  
933015  
933073  
933225  
933240  
933242  
938062  
973735  
M13004  
*
6
*
7
*
8
*
9
*
10  
*
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
SPACER, F-N-R DELRIN  
CAM ROLLER, SAW FNR CONTROL  
EXTENSION SPRING F-N-R CONTROL  
DENTENT BALL, SAW FNR CONTROL  
PIN, LONG SPRING HANGER  
PIN, SHORT SPRING HANGER  
SCREW, SHOULDER 3/8-16 X 3/4  
FRICTION DISC, SAW F-N-R  
1/2 X 1-1/4 BELLEVILLE WASHER  
WASHER, FENDER 1/2 X 1-1/2 ZINC  
WASHER, FLAT 1/4 SAE  
WASHER, FLAT 3/8 SAE  
LOCKNUT 3/8-16YZ  
SCREW, BHSC 10-24X1-SS  
F-N-R MOUNTING ASSY. ..........................1................ INCLUDES ITEMS W/  
4
*
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUELTANK ASSY.  
FUEL TANK ASSY.  
PAGE 20 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUELTANK ASSY.  
FUEL TANK ASSY.  
NO  
PART NO  
140004  
29509  
19633  
368006  
35009  
19473  
35007  
37128  
25553  
PART NAME  
QTY.  
REMARK  
1
*
2
*
3
*
4
*
5
*
6
*
7
*
8
*
9
FUEL TANK, 6000 & 6400 10 GAL  
CAP, FUEL TANK 2.25 DIA, ONE WAY VALVE  
BUSHING, RUBBER FUEL DAPCO 10672  
FITTING, FUEL 90 DEG. #4 X #6 BARB  
HOSE, 22.5" - 5/16" FUEL LINE  
CLAMP, HOSE WORM # 2  
1
1
2
1
1
4
1
1
HOSE, 26.5" - 1/4" FUEL LINE  
VALVE, FUEL ON/OFF  
FUEL TANK ASSY.......................................................... 1 ................. INCLUDES ITEMS W/  
*
10  
11  
12  
102043-1  
933242  
0166  
PLATFORM W/A SAW FUEL TANK  
WASHER, FLAT SAE 3/8" GRADE 9  
SCREW, HHC 3/8-16" X 7/8"  
1
5
5
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GAUGES AND CONTROLS ASSY.  
GAUGES AND CONTROLS ASSY.  
PAGE 22 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GAUGES AND CONTROLS ASSY.  
GAUGES AND CONTROLS ASSY.  
NO  
1
2
PART NO  
120222  
25634  
PART NAME  
BRACKET, DUETZ THROTTLE CABLE  
BULK HEAD ADAPTOR  
QTY.  
1
1
REMARK  
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
25624  
SWIVEL, CABLE END  
1
1
1
2
1
1
6
1
1
1
1
1
4
1
1
2
448004-1  
448004  
M940653  
15171  
584028  
933242  
448006  
926327  
25634  
SPACER, DEUTZ THROTTLE ACTUATOR ARM  
ARM, DEUTZTHROTTLE ACTUATOR  
SCREW, HHC M6-1.0 X 25MM GR10.9  
CABLE, PULL (THROTTLE)  
PIVOT END, CABLE  
WASHER, FLAT SAE 3/8 GRD 9 YZ  
CAM LEVER, CONCRETE SAW  
SCREW, SHDLR 3/8D X 1/2L, 5/16-1,SCKT HD  
BULK HEAD ADAPTOR  
CABLE, PULL (DRIVE ENGAGE)  
TACHOMETER, ELECTRIC 0-3000 RPM  
GROMMET. 1/2" ID  
INDICATOR, ENGINE  
VOLTMETER  
15171  
421000  
579072  
406021  
423000  
406017-1  
406017  
406000  
406020  
KEY, IGNITION  
IGNITION SWITCH W/KEYS  
SWITCH, ROCKER, CH# M-58031-01 ...................... 2 ......... AUX AND LIGHTS  
BLANK, ROCKER SWITCH COVER......................... 1 ......... AUX SWITCH NOT USED  
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGINE ASSY.  
ENGINE ASSY.  
PAGE 24 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGINE ASSY.  
ENGINE ASSY.  
NO.  
1
5
6
7
8
9
10  
11  
13  
15  
16  
17  
18  
PART NO.  
PART NAME  
ENGINE, DEUTZ BF3L 2011 60HP TURBO DIESEL  
FILTER, OIL, DEUTZ  
QTY.  
REMARKS  
35396  
306012  
304010  
267002  
205007  
367681  
366030  
35017  
946703  
933242  
TBD  
1
1
1
1
1
1
1
1
1
1
1
1
1
FILTER, FUEL, DEUTZ  
FLYWHEEL, MODIFIED BF 3L 1011 FL  
PLATE, HANDLEBAR STOP  
FITTING, STR 8MJ-M18MO  
FITTING, PLUG 8MJ  
HOSE ASSY, 19.9” #8LP W/ 370677/370677  
SCREW, HHC M8-1.25 X 25MM GR10.9  
WASHER  
DIPSTICK  
OIL FILLER CAP  
BLOWER JACKET 57HP DEUTZ TD 04179632  
TBD  
267009  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AIR INTAKE HOSE ASSY.  
AIR INTAKE HOSE ASSY.  
PAGE 26 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AIR INTAKE HOSE ASSY.  
AIR INTAKE HOSE ASSY.  
NO  
1
2
3
4
5
6
7
8
PART NO  
300010  
300007-1  
282003  
29218  
PART NAME  
QTY.  
REMARK  
AIR CLEANER, DONALDSON, W/90 DEG. BEND ..................1..........INCLUDES ITEMS W/  
*
BAND, DONALDSON AIR CLEANER  
PREFILTER, ENGINE AIR 3"  
CLAMP, HOSE WORM #48  
AIR INTAKE HOSE ASM  
HOSE, HUMP 3" x 2.75"  
TUBING, AIR CLEANER SPLICE  
TUBE, CRANCASE BREATHER, 57HP  
INDICATOR, ELECTRICAL SERVICE 30" H2O/7.5KPa  
FITTING, NIPPLE 1/8" MP  
WASHER, FLAT SAE 5/16 GRD 9 YZ  
SCREW, HHC 5/16-18 x 1-1/4  
NUT, NYLOC 5/16-18  
1
1
3
1
1
1
1
1
1
4
2
2
1
1
1
1
1
25625  
302009  
584036  
302012  
406018  
65516  
933241  
2623  
11  
12  
16  
17  
18  
19  
5283  
300010-1  
300009  
300008  
300010-2  
15538  
BODY, AIR FILTER  
*
20  
21  
22  
23  
AIR FILTER, SAFETY ELEMENT  
AIR FILTER, PRIMARY ELEMENT  
CAP, AIR FILTER  
*
*
*
CLAMP, HOSE WORM #6, 7/16-11/16  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MUFFLER KIT ASSY.  
MUFFLER KIT ASSY.  
PAGE 28 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MUFFLER KIT ASSY  
MUFFLER KIT ASSY.  
NO  
1
2
3
4
5
6
PART NO  
280002  
285003  
570005  
106088  
0300 B  
280002  
PART NAME  
QTY.  
REMARK  
MUFFLER AND FLEX KIT ASSY.  
EXHAUST, 12" EXTENSION  
CLAMP, MUFFLER 2-1/2", 5/16" U-BOLT  
BRACKET W/A, DEUTZ MUFFLER SUPPORT  
WASHER, FLAT SAE 5/16  
FLEX KIT  
1
1
1
1
2
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGINE MOUNTING ASSY.  
ENGINE MOUNTING ASSY.  
PAGE 30 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGINE MOUNTING ASSY.  
ENGINE MOUNTING ASSY.  
NO.  
1
PART NO.  
120266  
120267  
120268  
937188  
913838  
936216  
120270  
120271  
120274  
120273  
938067  
933247  
915373  
915218  
933244  
16521  
PART NAME  
QTY.  
REMARKS  
FRONT ENGINETRUNNION  
REAR ENGINETRUNNION  
RETAINER PLATE  
1
1
1
2
1
1
1
1
2
3
4
NUT, LOCK NUT,NYLOC 5/8-11GRD8  
SCREW, HHC 3/4-10X4 FT GR8  
NUT, HEX JAM 3/4-10, ZINC  
SUPPORT ARM, LH DEUTZ ENGINE  
SUPPORT ARM, RH DEUTZ ENGINE  
5
6
7
8
9
ENGINE MOUNT, RH REAR DEUTZ ENGINE, WA 1  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
ENGINE MOUNT, LH REAR DEUTZ ENGINE, WA  
NUT, TOP LOCK 3/4-10 GR9YZ  
WASHER, FLAT SAE 3/4 GRD 9 YZ  
SCREW, HHC 3/4-10X5GRD 8  
1
2
4
2
2
7
2
1
3
4
4
2
SCREW, HHC 1/2-13 X 3-3/4GRD8  
WASHER, FLAT SAE 1/2 GRD 9 YZ  
SCREW, HHC 1/2-13 X 4 GD8  
SCREW, MODIFIED 1/2-13 X 1 3/4 GR5  
SCREW, HHC 1/2-13 X 2 GR8YZ  
SCREW, HHC M14-2.0X50MM GRD. 10.9  
WASHER, FLAT SAE 9/16 GRD 9 YZ  
NUT  
25716  
915211  
940738  
933245  
TBD  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGINE GUARD ASSY.  
ENGINE GUARD ASSY.  
5
4
2
3
1
PAGE 32 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGINE GUARD ASSY.  
ENGINE GUARD ASSY.  
NO.  
1
2
3
4
PART NO.  
205011  
3214  
933244  
TBD  
PART NAME  
QTY.  
REMARKS  
ENGINE GUARD, WA  
SCREW, HHC 1/2-13 X 1 1/4  
1/2 SAE FLAT WASHER YZ9  
WASHER  
1
1
1
2
2
5
TBD  
HEX BOLT  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HANDLE AND LIGHT ASSY.  
HANDLE AND LIGHT ASSY.  
PAGE 34 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HANDLE AND LIGHT ASSY.  
HANDLE AND LIGHT ASSY.  
NO.  
PART NO.  
15503  
102023-2  
405001  
TBD  
PART NAME  
KNOB, COMFORT GRIP STAR, 3/8 - 16 X 1  
TUBE, LIGHT BAR  
CONNECTOR, PLUG, 4 PIN FEMALE  
WASHER, LOCK  
NUT  
HANDLE BAR, CONCRETE SAW  
KNOB W/A, HANDLEBAR  
SCREW, SHC 8-32 X 1-1/4  
CAM CLEAT  
TERMINAL,FEM-SMALL 16-18 GA  
CORD, LIGHT-EXTENDABLE  
LIGHT ASSY.,RECTANGULAR COMP.  
GRIP HANDLE BAR  
QTY.  
REMARKS  
1
*
2
*
3
*
4
*
5
*
6
7
8
9
2
1
1
1
1
2
2
2
1
2
1
1
2
TBD  
560023-1  
560024  
923199  
574002  
TBD  
TBD  
TBD  
10  
*
11  
*
12  
*
13  
560017  
TBD  
14  
LIGHT KIT ........................................................................ 1 .......... INCLUDES ITEMS W/  
*
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIGHT CONNECTOR/DASH PANEL ASSY.  
LIGHT CONNECTOR/DASH PANEL ASSY.  
PAGE 36 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIGHT CONNECTOR/DASH PANEL ASSY.  
LIGHT CONNECTOR/DASH PANEL ASSY.  
NO.  
1
2
3
4
PART NO.  
933241  
0655  
104016  
13287  
923114  
405000  
TBD  
PART NAME  
WASHER, FLAT SAE 5/16 GRD 9 YZ  
SCREW, HHC 5/16-18 X 3/4  
COVER W/A, CONCRETE SAW DASH PANEL  
NUT, NYLOC 8-32  
SCREW, SHC 8-32 x 1/2  
CONNECTOR, 4-WAY SOCKET CHROME  
WIRE, BLACK #14  
WIRE, BLACK #14  
SEAL, WEATHERPACK 16-18 GA , GREEN  
TERMINAL, WEATHERPACK MALE 14-16 GA  
CONNECTOR, WEATHERPACK 2 PIN MALE  
QTY.  
REMARKS  
7
7
1
2
2
1
5
6
*
8
TBD  
TBD  
*
9
TBD  
*
10  
12171  
12179  
12176  
25865  
2
2
1
*
11  
*
12  
*
13  
HARNESS, LIGHT KIT .............................................. 1......... INCLUDES ITEMS W/  
*
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POINTER ASSY.  
POINTER ASSY.  
PAGE 38 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POINTER ASSY.  
POINTER ASSY.  
NO.  
2
PART NO.  
PART NAME  
QTY.  
1
REMARKS  
120239  
120238  
500005  
5070 B  
995366  
582008  
933241  
0655  
POINTER FRAME WA, RIGHT SIDE 6400  
POINTER FRAME WA, LEFT SIDE 6400  
6 X 1 POINTER WHEEL  
3
1
4
1
5
NUT, NYLOC 3/4-10  
2
6
SCREW, HHC 3/4-10X3-1/4YZ5  
BUSHING, FLANGE,1 OD X 3/4 ID  
WASHER, FLAT SAE 5/16 GRD 9 YZ  
SCREW, HHC 5/16-18 X 3/4  
2
7
4
8
2
9
2
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
15503  
KNOB, COMFORT GRIP STAR, 3/8-16 X 1  
POINTER, RIGHT FRONT 17 1/4 (6457)  
POINTER, LEFT FRONT 12 1/4  
AXLE, POINTER WHEEL  
2
110044  
110045  
160004  
933244  
926006  
20473  
1
1
1
WASHER, FLAT SAE 1/2 GRD 9 YZ  
SCREW, SQHS, CP 1/4-20 X 1/2  
SCREW, HHC 3/8-16 X 3 FULL THREAD GR5  
WASHER, FENDER, 1.5OD X 3/8ID  
NUT, LOCK, NYLOC 3/8-16 GRD 8  
POINTER ROPE ASSY  
2
2
1
3233  
2
937185  
574003  
1456  
1
1
NUT, HEX FINISH 3/8-16  
3
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REAR POINTER AND FOOT REST ASSY.  
REAR POINTER AND FOOT REST ASSY.  
PAGE 40 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REAR POINTER AND FOOT REST ASSY.  
REAR POINTER AND FOOT REST ASSY.  
NO.  
1
2
3
4
PART NO.  
560029  
933241  
0202  
110020  
0205  
PART NAME  
QTY.  
REMARKS  
FOOT REST  
1
2
2
1
1
WASHER, FLAT 5/16" YZ9  
SCREW, HHC 5/16"-18 X 1 ZINC  
REAR POINTER  
5
HCS, 3/8-16 X1  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BATTERY ASSY.  
BATTERY ASSY.  
PAGE 42 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BATTERY ASSY.  
BATTERY ASSY  
NO. PART NO. PART NAME  
QTY.  
1
REMARKS  
1
120265  
12832  
575001  
1665  
10133  
125051  
915109  
933242  
206011  
10136  
PLATFORM, CONCRETE SAW BATTERY, WA  
SNUBBINGWASHER  
2
4
3
RUBBER MOUNT ASSY  
4
4
SCREW, HHC 3/8-16 X 2  
NUT, NYLOC 3/8-16  
BATTERY RETAINER CLIP W/A 6057 & 6457  
SCREW, HHC 3/8-16X1-1/2 GR8YZ  
WASHER, FLAT SAE 3/8 GRD 9 YZ  
BATTERY RUBBER PAD  
4
5
6
6
1
7
1
8
1
9
2
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
WASHER, FLAT SAE 3/8  
BATTERY  
8
404006  
35037  
1
CABLE ASSY, BATTERY POS (+) TO STARTER (+)  
CABLE ASSY, ENGINE GROUND  
CABLE ASSY, BATT. TO LIFT PUMP SOLENOID  
CABLE ASSY, LIFT PUMP SOL. TO LIFT PUMP POS (+)  
CABLE ASSY, BATTERY TO LIFT PUMP NEG (-)  
TERMINAL, POSITIVE BATTERY, MARINE  
TERMINAL, NEGATIVE BATTERY, MARINE  
SCREW, HHC 3/8-16 X 1/2 GRD8  
SCREW, HHC M10-1.5 X 20 MM  
1
35032  
1
35033  
1
35036  
1
35035  
1
405060  
405061  
915101  
940692  
1
1
2
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DRIVE ASSY.  
DRIVE ASSY.  
PAGE 44 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DRIVE ASSY.  
NO. PART NO. PART NAME  
QTY.  
REMARKS  
1
2
3
4
5
6
7
263003  
TRANSAXLE  
1
8
9
2
1
1
06501-028 SCREW, HHC 3/8-16 X 3-1/2 RCC130H  
933242  
120078  
125040  
25623  
3/8 SAE FLAT WASHER YZ9  
BACKING PLATE, TRANSAXLE  
ALIGNMENT ADJ BRACKET  
CIRCLIP, RETAINER  
540033  
PULLEY, A SECTION  
4.125 X 18 TOOTH SPLINE  
STAND-OFF 7/8 HEX  
WHEEL, 12X3X2 NEOPRENE TREAD  
BUSHING, 1" TRANSTORQUE KEYLESS 2  
6-1/2" 5 BLADE FAN  
1
1
2
8
583064  
35326  
582038  
384001  
933201  
TBD  
923118  
968011  
933244  
25966  
25971  
25956  
25973  
25955  
25964  
25964  
25976  
25718  
367470  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
1
1
1
1
1
2
3/16 FENDER WASHER  
8 SAE FLAT WASHER  
SCREW, SHC 8-32X1 NP  
NUT, HEX FINISH 1/2-13  
WASHER, FLAT SAE 3/8 GRD 9 YZ  
HOSE, 61" #6 LP ........................................ 1 ....... TRANSAXLE (REAR) TO BLADESHAFT (TOP)  
HOSE, 24.2" #4 HP ..................................... 1 ....... TRANSAXLE (TOP) TO WATER FLOW (RIGHT)  
HOSE, 8" #8 LP........................................... 1 ....... TRANSAXLE (TOP) TO TRANS. FILTER (BOTTOM)  
HOSE, 65.7" #4 HP ..................................... 1 ....... TRANSAXLE (TOP) TO BLADESHAFT (REAR)  
HOSE, 17" #8 LP ........................................ 1 ....... TRANS. FILTER (TOP) TO OIL COOLER (RIGHT)  
HOSE, 73.9" #6 LP ..................................... 1 ....... BLADESHAFT (TOP) TO OIL RESERVOIR (BOTTOM)  
HYDRAULIC HOSE .................................... 1 ....... BLADESHAFT (TOP) TO OIL RESERVOIR (REAR)  
HOSE, 18.5" 1/2 ID PUSHLOCK 250 PSI .. 1 ....... TRANSAXLE (FRONT) TO TRANSAXLE (FRONT)  
FITTING, ORIFICE 4MJ-6MO X .020  
FITTING, STR 4MJ - 6MO  
HOSE, 78.4" #8 LP  
1
1
28 25957  
1 ....... OIL COOLER (RIGHT) TO BLADESHAFT (REAR)  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TRANSAXLE MOUNTING/CAM LEVER ASSY.  
TRANSAXLE MOUNTING/CAM LEVER ASSY.  
PAGE 46 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TRANSAXLE MOUNTING/CAM LEVER ASSY.  
TRANSAXLE MOUNTING/CAM LEVER ASSY.  
NO.  
1
PART NO.  
06501-028  
933242  
120078  
125040  
933244  
968011  
448007  
584028  
926327  
5283  
PART NAME  
QTY.  
8
REMARKS  
SCREW, HHC 3/8-16 X 3-1/2 RCC130H  
WASHER, FLAT SAE 3/8 GRD 9 YZ  
TRANSAXLE BACKING PLATE ASSY, WA  
ALIGNMENT ADJUSTING BRACKET, WA  
WASHER, FLAT SAE 1/2 GRD 9 YZ  
NUT, HEX FINISH 1/2-13  
2
13  
2
3
4
1
5
2
6
2
7
CAM LEVER  
SWIVEL, CABLE  
3/8 X 1/2 SHOULDER BOLT  
NUT, NYLOC 5/16-18  
PIN, COTTER 1/16X1/2 PLTD  
SCREW, SHC 8-32X3/8 GRD 8  
WASHER  
1
8
1
9
1
10  
11  
12  
13  
1
965012  
923113  
TBD  
1
1
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-SPEED BLADESHAFT (GEARBOX) ASSY.  
GEARBOX ASSY.  
PAGE 48 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-SPEED BLADESHAFT (GEARBOX) ASSY.  
GEARBOX ASSY.  
NO.  
PART NO. PART NAME  
QTY.  
1
REMARKS  
1
220100-1  
960857  
960855  
220100-3  
923202  
2460  
923201  
220100-4  
923203  
924200  
584019  
25666  
HOUSING, MAIN CASE  
THREADED INSERT 3/8-16 X 9/16-12  
THREADED INSERT 5/16-18 X 1/2-13  
FRONT ACCESS COVER  
1/4-20 X 5/8 SHCS  
*
2
3
1
*
13  
1
*
4
5
*
9
*
6
7
SCREW, 1/4-20 X 1/2" FHSC  
1/4-20 X 1/2 SHCS  
2
*
1
*
8
9
COVER PLATE  
1
*
1/4-20 X 3/4 SHCS  
13  
2
*
10  
10-24 X 5/8 FHSCS  
*
11  
SIGHT GLASS  
O-RING  
1
*
12  
*
2
13  
*
584030  
368697  
202000  
915101  
933242  
926942  
421001  
25695  
306013  
368657  
578011  
583026  
577009  
ANTI-ROTATING BOLT  
4-7/16-20 SAE-HHP  
8
14  
8
*
15  
BLADESHAFT SKID PLATE  
3X8-16 X 1/2 HCS YZ8  
3/8 SAE FLAT WASHER YZ9  
DOWEL PIN 3/8 X 3/4  
TACH SIGNAL GENERATOR  
WASHER, SEALED 3/4"  
FILTER, HIGH PRESSURE INLINE  
FITTING, PLUG 12MO  
O-RING  
1
*
16  
*
4
17  
*
4
18  
3
*
19  
1
*
20  
*
1
21  
*
1
23  
1
*
24  
1
*
25  
*
1/2-20 MAGNETIC DRAIN PLUG  
DRAIN PLUG GASKET  
1
26  
*
1
29  
367015-013 1/16 HH PLUG .013 ORIFICE  
11749  
11722  
220100-5  
2203  
6
*
30  
FITTING, STR 8MJ-8MO  
FITTING, 90 6MJ-6MO  
HOUSING, END COVER  
WASHER, FLAT, #10  
SCREW, BHSCS 10-24 X 3/8  
5/16-18 X 1-3/4 SHCS  
5/16-18 X 2-3/4 SHCS  
SEAL  
7/16-14THREADED INSERT  
BLADESHAFT, 6400 SERIES 4 SPEED  
SNAP RING  
WOODRUFF KEY #807  
KEY 3/8 X 1.375  
GEAR SPACER  
1
*
31  
*
3
32  
*
1
34  
3
*
35  
924029  
923260  
923264  
480005  
960157  
162004  
576011  
241003  
969340  
583019  
583069  
578135  
485003  
480007  
480006  
576006  
10138  
3
*
38  
*
5
39  
*
4
41  
1
*
42  
2
*
43  
*
1
44  
*
1
45  
2
*
46  
1
*
47  
*
1
48  
*
SPACER, BEARNG 6400 SERIES 4 SPEED  
O- RING  
1
49  
50  
2
*
SEAL SLEEVE  
2
*
51  
*
SEAL CR 19599  
2
52  
*
SEAL  
2
53  
1/4-20 X 1/2 SET SCREW  
EXTERNAL SNAP RING  
THRUSTWASHER  
2
*
54  
6
*
55  
*
486001  
2
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-SPEED BLADESHAFT (GEARBOX) ASSY.  
GEARBOX ASSY. (CONTINUED)  
PAGE 50 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-SPEED BLADESHAFT (GEARBOX) ASSY.  
GEARBOX ASSY. (CONTINUED)  
NO.  
PART NO. PART NAME  
QTY.  
13  
1
1
2
REMARKS  
56  
923255  
25693  
SCREW SHC 5-16 X 18 X 1  
*
57  
*
HOUSING, LONG SIDE, 6400 SERIES  
HOUSING, SHORT SIDE, 6400 SERIES  
COLLAR, INNER BLADE SHAFT  
58  
*
168006  
180004  
180003  
926790  
582012  
915316  
915315  
241001  
241001-1  
241003  
241000  
241002  
241001-2  
460014  
460011  
460004  
460015  
576009  
576008  
180003-1  
25694  
59  
*
60  
COLLAR ASSY, OUTER BLADE SHAFT...................2.......... INCLUDES ITEMS W/#  
*
61#  
PIN, DOWEL 3/8 X 1-3/4  
BUSHING, QUICK DISCONNECT  
SCREW, HHC 5/8-11X3 LH GR8  
SCREW, HHC 5/8-11X3 GR8  
SLIDER GEAR  
2
2
1
1
1
1
1
1
1
1
3
3
2
2
3
3
1
*
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
SLIDER SHAFT  
OUTPUT GEAR  
INPUT GEAR  
MAIN SHAFT  
BOLT, SLIDER  
BEARING 22207-RHR  
BEARING  
BEARING  
BEARING  
EXTERNAL SNAP RING  
INTERNAL SNAP RING  
COLLAR, OUTER BLADE SHAFT  
77#  
78  
*
4-SPEED BLADESHAFT (GEARBOX) ASSY............. 1......... INCLUDES ITEMS W/  
*
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SHIFTER ASSY.  
SHIFTER ASSY.  
PAGE 52 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SHIFTER ASSY.  
SHIFTER ASSY.  
NO.  
1
PART NO. PART NAME  
QTY.  
REMARKS  
220100-2  
25705  
SHIFT COVER HOUSING .................... 1 ............. S/N 1-84  
1
SHIFT COVER HOUSING .................... 1 ............. S/N 85 AND ABOVE  
DOWEL PIN 1/4 X 3/4.......................... 2 ............. S/N 1-84 ONLY  
3
926919  
584018-1  
584018-2  
565001  
578014  
578010  
974312  
584017  
925584  
241004-1  
560022  
565000  
565000  
583035  
576010  
480004  
241005-2  
35341  
241005-1  
35342  
964053  
35353  
924254  
923212  
915103  
933242  
4
DETENT BODY  
1
1
1
1
2
1
1
1
1
1
5
DETENT PLUNGER  
PLUNGER SPRING  
O-RING AS-014  
O-RING  
PIN, SPRING 0.125 X 1.5  
BALL PLUNGER  
SET SCREW .375 X 0.625  
SHIFT PINION  
PINION SHIFT HANDLE  
WAVE DISC SPRING........................... 1 ............. S/N 1-84  
WAVE DISC SPRING........................... 2 ............. S/N 85 AND ABOVE  
SHIFTER SPACER  
SNAP RING 2.0 X 0.0693  
SEAL  
SHIFT FORK ........................................ 1 ............. S/N 1-84  
SHIFT FORK ........................................ 1 ............. S/N 85 AND ABOVE  
SHIFT ROD .......................................... 1 ............. S/N 1-84  
SHIFT ROD .......................................... 1 ............. S/N 85 AND ABOVE  
SPRING PIN 3/32 X 3/8 ....................... 1 ............. S/N 1-84  
SPRING PIN 1/8 X 3/8 ......................... 1 ............. S/N 85 AND ABOVE  
SCREW, FHSCS 5/16-18 X 3/4 ............ 1 ............. S/N 1-84 ONLY  
SCREW, SHCS 1/4-20 X 2-1/4  
6
7
8
9
10  
11  
12  
13  
14  
14  
15  
16  
17  
18  
18  
19  
19  
20  
20  
21  
22  
23  
24  
1
1
1
3
SCREW, HCS 3 X 8-16 X 3/4............... 1 .............S/N 85 AND ABOVE ONLY  
WASHER, 3/8 SAE FLAT WASHER ..... 1 .............S/N 85 AND ABOVE ONLY  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GEARBOX MOUNTING ASSY.  
GEARBOX MOUNTING ASSY.  
PAGE 54 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GEARBOX MOUNTING ASSY.  
GEARBOX MOUNTING ASSY.  
NO  
1
2
PART NO  
06502012  
933243  
16530  
PART NAME  
QTY.  
REMARK  
SCREW, HHC 7/16- 14 X 1- 1/2  
7/16 SAEFLAT WASHER YZ9  
SCREW, HHC 7/16-14 X 1  
1
3
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
1023  
100022  
25757  
583095  
120225  
923357  
120226  
540043  
460016  
TBD  
SCREW, HHC 3/8-16 X 1 1/4 GR 5  
REMOVABLE FRONT SECTION, WA  
FRONT PLATE- POINTER MOUNT, WA  
GEARBOX MOUNT SPACER  
GEARBOX MOUNTING BLOCK ASSY.  
SCREW, SHC 7/16-14 X 1-1/4,NP  
GEARBOX MOUNTING BLOCK W/PIN, ASSY.  
PULLEY, 6.0 10G 3V  
BUSHING, 17/8- 2517 SERIES TAPER LOCK  
PLATE  
GEARBOX SUPPORT PLATE WASHER  
GEARBOX SUPPORT, RIGHT SIDE  
6
1
1
2
1
4
1
1
1
TBD  
1
583094  
125053  
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PULLEY AND V-BELT ASSY.  
PULLEY AND V-BELT ASSY.  
PAGE 56 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PULLEY AND V-BELT ASSY.  
PULLEY AND V-BELT ASSY.  
NO PART NO PART NAME  
QTY.  
REMARKS  
2
3
4
5
6
7
8
9
544005  
938422  
544006  
120232  
448000  
540003  
25716  
FLANGE, SPLINED DRIVE  
1
8
1
1
1
1
1
2
2
1
8
1
3
1
1
2
1
2
1
1
8
1
4
3
4
2
2
1
1
1
1
1
1
2
1
1
1
8
8
SCREW, HHC M10-1.0 X 50MM 10.9 NP  
SHAFT, SPLINED DRIVE  
BELT TENSIONER MOUNT  
TENSIONER IDLER ARM RT2001  
4 INCH A SECTION SHEAVE  
SCREW, MODIFIED 1/2-13 X 1-3/4 GR5  
WASHER, 3/8 FLAT SAE P YZ  
SCREW, HHC 3/8-16 X 3/4 GR8YZ  
SHOULDER ADAPTER SB0005  
SCREW, HHC 1/4-20 X 3/4 GRD 8  
933242  
10 915103  
11 544001  
12 915003  
13 261002-1 ADAPTOR PLATE  
SCREW, FHSC 10-1.5 X 25 MM NP  
14 939978  
15 544007  
16 576015  
17 460024  
18 583088  
20 520009  
21 576014  
22 544008  
23 923203  
24 544004  
25 924200  
26 540030  
27 925437  
28 576003  
29 460021  
30 120281  
31 960102  
32 167004  
34 10307  
35 933244  
36 10176  
37 584029  
38 521006  
39 521013  
40 540056  
41 940694  
42 933242  
BEARING SUPPORT  
SNAP RING, INTERNAL  
BEARING  
SPACER, BEARING 10 MM  
V-BELT, 3VX 450 5 G POWERBAND  
SNAP RING, EXTERNAL  
SPLINED DRIVEN FLANGE  
SCREW, SHC 1/4-20 X 3/4  
PTO CAP  
SCREW, FHSC 10-24 X 5/8 NP  
PULLEY, A SECTION 4.125 X 3/4"  
SCREW, SHS, CP 5/16-18 X 3/8  
SNAP RING  
BEARING, ROLLER 6204-2RS  
JACKSHAFT PIVOT ARM, W/A  
FITTING, GREASE ZERK 1/8 MP  
JACKSHAFT  
SCREW, HHC 1/2-13 X 5  
WASHER, FLAT SAE 1/2 9 YZ  
NUT, NYLOC 1/2-13  
KEY, 3/16  
BELT, AX 35  
BELT, AX 37  
PULLEY, 5.1 10G 3V X 4.0 1A  
SCREW, HHC M10-1.5X30MM FT 10.9 NP  
WASHER, FLAT SAE 3/8 GRD 9 YZ  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BELT GUARD  
BELT GUARD  
7
3
1
4
2
3
6
5
PAGE 58 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BELT GUARD  
BELT GUARD  
NO.  
1
2
3
4
5
6
7
PART NO.  
PART NAME  
QTY.  
REMARKS  
25756  
BELT GUARD, WA  
1
5
8
1
2
2
3
915051  
933241  
204021-1  
915105  
933242  
0655  
5/16-18 X 1/2 HCSYZ8  
5/16 SAE FLAT WASHER YZ9  
BELT ADJUSTMENT ACCESS COVER  
3/8-16 X 1 HCS YZ8  
3/8 FLAT WASHER YZ9  
SCREW, HHC 5/16-18 X 3/4  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIFT PUMP CIRCUIT ASSY.  
LIFT PUMP CIRCUIT ASSY.  
PAGE 60 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIFT PUMP CIRCUIT ASSY.  
LIFT PUMP CIRCUIT ASSY.  
NO  
1
2
3
4
5
6
7
8
PART NO  
340009  
933241  
4683  
06500-007  
447009  
480003  
2621  
368817  
444008  
446029  
446010  
21095  
169006  
25968  
25967  
25970  
5277  
570050  
366690  
25628  
12171  
12179  
PART NAME  
QTY.  
1
4
2
2
1
4
2
2
1
2
2
5
2
2
1
1
4
2
1
1
6
6
2
2
REMARK  
LIFT PUMP ASSY  
5/16 SAE FLAT WASHER GRD 9 YZ  
SCREW, HHC 5/16-18 X 5/8  
SCREW, HHC 5/16-18 X 7/8  
LIFT CYLINDER  
SEAL, OIL CR-9815  
FITTING, GREASE ZERK STR 1/4-28  
FITTING, 90 4MJ-4MO  
MANIFOLD, 3 SPEED RAISE-LOWER  
COIL, 12VDC-CARTRIDGE VALVE  
CARTRIDGE VALVE  
FITTING, STR 4MJ-4MO  
PIN, CYLINDER  
HOSE, 16.7" #4 HP  
HOSE, 58.6" #4 HP  
9
10  
11  
12  
13  
14  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
HOSE, 21.2" #4 HP  
HHC 1/4-20 X 1-1/2  
*
CLAMP ASSY, #4 SINGLE HOSE  
FITTING, TEE RUN 4MJ-4MJ-4FJ  
SOLENOID, LIFT PUMP  
SEAL, WEATHERPACK 16-18 GA GREEN  
TERMINAL, WEATHERPACK MALE 14-16 GA  
CONNECTOR, WEATHERPACK MALE  
SCREW, SHC 12-24 X 3/4  
WASHER, FLAT #10  
INCLUDES ITEMS W/  
*
405066  
923186  
2203  
2
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATER SYSTEM ASSY.  
WATER SYSTEM ASSY.  
PAGE 62 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATER SYSTEM ASSY.  
WATER SYSTEM ASSY.  
NO PART NO PART NAME  
QTY.  
REMARKS  
1
2
3
4
5
6
7
8
9
446004  
923143  
26496  
25827  
25828  
25960  
382001  
25931  
25962  
VALVE, BALL, 1/2 BRASS  
2
4
1
1
1
SCREW, SHC 10-24 x 3/8"  
FITTING, 90 1/2MP- 1/2FP  
FITTING, BRASS (F) 3/4 GHT SWIVEL 1/2 MNPT  
GASKET, GARDEN HOSE SWIVEL  
HOSE, 7.5", #8 LP .................................................... 1.........WATER HOSE TO OIL COOLER  
OIL COOLER  
FITTING, 90 8BARB-1/2 MP (4390-8-8)  
HOSE, 19.5", #8 LP .................................................. 1.........OIL COOLER TO WATER ON/OFF  
HOSE, 17.2", #8 LP .................................................. 1.........WATER ON/OFF TO WATER FLOW  
HOSE, 127.8", #8 LP................................................. 1.........WATER FLOWTO BLADEGUARD  
1
4
10 25961  
11 25963  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLADEGUARD (16-36") ASSY.  
BLADEGUARD (16-36") ASSY.  
11  
3
18  
1
12  
7
8
13  
14  
9
5
W
ARNING!  
17  
KEEP  
HANDS  
CLEAR  
W
h
In  
e
CAUTIO  
is  
B
n
ta  
h
L
a
s
C
rg  
e
e
e
15  
lle  
r
B
e
S
d
e
e
la  
d
e
D
N
,
a
w
B
d
rs  
e
n
g
n
O
lt  
a
n
d
F
A
to riv  
ILURE  
JADV  
G
U
P
e
u
ro  
u
M
M
a
T
.
TO  
EEE  
p
rd  
a
e
COMPL  
n
S
r
S
AV  
a
l.  
iz  
e
S.M.I.  
SA  
W
EEA  
Y
W
6
OIEJIGTHGVCBVVZ  
THE  
MASO
MANUF  
C
Y
C
ACTUARNEDR  
AH  
CONCRE
’S  
INSTITUTE  
R
O
T
T
I
O
N
W
ARNING!  
2
11  
KEEP  
FEET  
CLEAR  
13  
12  
16  
4
19  
15  
10  
PAGE 64 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLADE GUARD (16-36") ASSY.  
BLADEGUARD (16-36") ASSY.  
NO.  
1
PART NO.  
200003  
200008  
200009  
200011  
PART NAME  
QTY.  
REMARKS  
BLADEGUARD W/A, FRONT HALF .................................... 1 ............... 16"  
BLADEGUARD W/A, FRONT HALF .................................... 1 ............... 20"  
BLADEGUARD W/A, FRONT HALF .................................... 1 ............... 26"  
BLADEGUARD W/A, FRONT HALF .................................... 1 ............... 30"  
1
1
1
1
200013SP- BLADEGUARD W/A, FRONT HALF .................................... 1 ............... 36"  
2
200004  
200008  
200010  
200012  
200014  
582040  
582039  
362002  
362003  
445002  
445003  
370456  
320010  
2113  
200019  
576006  
923144  
1618  
10176  
10024  
BLADEGUARD W/A, REAR HALF ...................................... 1 ............... 16"  
BLADEGUARD W/A, REAR HALF ...................................... 1 ............... 20"  
BLADEGUARD W/A, REAR HALF ...................................... 1 ............... 26"  
BLADEGUARD W/A, REAR HALF ...................................... 1 ............... 30"  
BLADEGUARD W/A, REAR HALF ...................................... 1 ............... 36"  
BUSHING, BLADEGUARD HINGE, DELRIN....................... 1 ............... 16", 20", 26"  
BUSHING, BLADEGUARD HINGE, DELRIN....................... 1 ............... 30", 36"  
2
2
2
2
3
3
4
RIGHT SIDE WATERING TUBE  
LEFT SIDE WATERING TUBE  
MANIFOLD, WATER, SMALL .............................................. 1 ............... 16", 20", 26"  
MANIFOLD, WATER, LARGE .............................................. 1 ............... 30", 36"  
FITTING, BRASS 6BARB-1/4MP  
FITTING,QD MALE SNAPTITE PHN4,1/4MP  
FITTING, PLUG 1/8MP HEX SKT HD  
FLAP, MUD  
HOSE, WATER #6LP  
SCREW, SHC 10-24 X 1/2  
NUT, NYLOC 10-24  
NUT, NYLOC 1/2- 13  
NUT, NYLOC 1/4- 20  
1
1
5
6
6
7
2
2
1
1
2
4
1
1
3
1
2
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
18  
19  
0131 A  
26250  
06503-026  
06503-030  
10930  
SCREW, HHC 1/4- 20 X 3/4  
SCREW, HHC 1/4- 20 X 1 3/4  
SCREW, HHC 1/2-13 X 3-1/4 .............................................. 1 ............... 16", 20", 26"  
SCREW, HHC 1/2-13 X 3-3/4 .............................................. 1 ............... 30", 36"  
WASHER, FENDER, 1/4 X 1-1/4  
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLADEGUARD (42") ASSY.  
BLADEGUARD (42") ASSY.  
11  
5
10  
A
17  
3
6
A
W
ARNING!  
13  
1
14  
K
EE  
P
W
is  
Be  
hen  
InstaLllaerdg,er  
H
CAUTION  
A
16  
16  
C
4
ND  
LE  
S
A
Changed  
R
See  
Blade  
Belt  
Owners  
F
A
and  
D
ILURE  
to  
M
JADV  
rive  
Proper Guard  
T
M
O
EEE  
COMPLanual.  
UST  
Size.  
A
V
S.M.I.  
SA  
W
EEA  
Y
W
OIEJGGVCBVVZ  
ITH  
MASO
MANUF  
THE  
C
Y
ACTURER’S  
AND  
C
AH  
CONCRET
INSTITUTE  
W
ARNING!  
11  
5
K
E
E
P
15  
F
C
E
L
E
E
T
A
R
A
15  
18  
7
12  
2
9
17  
PAGE 66 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLADEGUARD (42") ASSY.  
BLADEGUARD (42") ASSY.  
NO.  
1
PART NO.  
200021  
200022  
582039  
445003  
370456  
320010  
362003  
362002  
200019  
584039  
362009  
0131 A  
26250  
PART NAME  
QTY.  
1
REMARKS  
BLADEGUARD, FRONT HALF  
BLADEGUARD, REAR HALF  
BUSHING, BLADEGUARD HINGE, DELRIN  
MANIFOLD, WATER, LARGE  
FITTING, BRASS 6BARB-1/4MP  
FITTING, QD MALE SNAPTITE PHN4 1/4MP  
LEFT SIDE WATERING TUBE  
RIGHT SIDE WATERING TUBE  
FLAP, MUD, BLADEGUARD  
PIN, HINGE 4-1/2 W/RETAINING WIRE  
HOSE, WATER # 6LP  
2
1
3
1
4
1
5
2
6
1
7
1
8
1
9
1
10  
11  
12  
13  
14  
15  
16  
17  
18  
1
2
SCREW, HHC 1/4-20 X 3/4  
1
SCREW, HHC 1/4-20 X 1 3/4  
FITTING, PLUG 1/8MP HEX SKT HD  
NUT, NYLOC 1/4-20  
2
2113  
1
10024  
1618  
923144  
10930  
3
NUT, NYLOC 10-24  
4
SCREW, SHC 10-24 X 1/2  
4
WASHER, FENDER, 1/4 X 1-1/4  
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLADEGUARD (48") ASSY.  
BLADEGUARD (48") ASSY.  
11  
10  
8
13  
4
6
3
5
12  
W
ARNING!  
14  
16  
KEEP  
HANDS  
CLEAR  
When  
CAUTION  
is  
Be  
See  
InstaLllaerdg,er  
Changed  
Blade  
Belt  
Owners  
FA  
and  
Drive  
to  
Proper Guard  
I
L
J
U
A
R
D
E
V
TO  
Manual.  
MUST  
Size.  
E
E
C
O
E
AV  
M
E
P
A
S
S
E
L
Y
.M  
W
E
.
W
I
.
A
O
M
IT  
G
I
A
H
G
M
S
J
T
V
O
A
H
N
N
E
B
R
U
C
C
Y
A
F
A
C
Z
V
C
N
A
H
V
T
D
U
C
R
O
E
R
N
I
’S  
C
R
E
N
T
S
E
T
IT  
U
T
E
1
16  
W
ARNING!  
7
K
E
E
P
F
C
E
L
E
E
T
A
R
17  
15  
12  
18  
9
2
PAGE 68 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLADEGUARD (48") ASSY.  
BLADEGUARD (48") ASSY.  
NO.  
1
PART NO.  
200046  
200047  
582039  
445003  
370456  
320010  
362003  
362002  
200019  
584039  
362010  
0131 A  
26250  
PART NAME  
QTY.  
1
REMARKS  
BLADEGUARD W/A, FRONT HALF  
BLADEGUARD W/A, REAR HALF  
BUSHING, BLADEGUARD HINGE, DELRIN  
MANIFOLD, WATER, LARGE  
FITTING, BRASS 6BARB-1/4MP  
FITTING, QD MALE SNAPTITE PHN4 1/4MP  
LEFT SIDE WATERING TUBE  
RIGHT SIDE WATERING TUBE  
FLAP, MUD, BLADEGUARD  
PIN, HINGE 4-1/2 W/RETAINING WIRE  
HOSE, WATER # 6LP  
2
1
3
1
7
1
8
2
4
1
9
1
10  
11  
6
1
1
1
5
2
16  
15  
17  
13  
12  
18  
14  
SCREW, HHC 1/4-20 X 3/4  
1
SCREW, HHC 1/4-20 X 1 3/4  
FITTING, PLUG 1/8MP HEX SKT HD  
NUT, NYLOC 1/4-20  
2
2113  
1
10024  
1618  
923144  
10930  
3
NUT, NYLOC 10-24  
SCREW, SHC 10-24 X 1/2  
WASHER, FENDER, 1/4 X 1-1/4  
4
4
1
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLADEGUARD MOUNT/WIPER ASSY.  
BLADEGUARD MOUNT/WIPER ASSY.  
PAGE 70 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BLADEGUARD MOUNT/WIPER ASSY.  
BLADEGUARD MOUNT/WIPER ASSY  
NO.  
2
PART NO.  
M200000  
100019  
206006  
202  
PART NAME  
QTY.  
REMARKS  
FLANGE GAURD, WA  
1
2
2
8
8
1
1
1
1
6
3
BACKING STRIP  
4
SLURRY GUARD FLAP  
SCREW, HHC 5/16-18 X 1 ZINC  
NUT, NYLOC 5/16-18  
5
6
5283  
7
120090  
120092  
120091  
120093  
924288  
LEFT BLADEGAURD MOUNT CLIP  
RIGHT BLADEGAURD MOUNT CLIP  
LEFT BLADE CLIP SPACER  
RIGHT BLADE CLIP SPACER  
3/8-16 X 1-1/2 SHCS  
8
9
10  
11  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEPTH STOP METER/CABLE ASSY.  
DEPTH STOP METER/CABLE ASSY.  
PAGE 72 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEPTH STOP METER/CABLE ASSY.  
DEPTH STOP METER/CABLE ASSY.  
NO  
1
PART NO  
25538  
PART NAME  
QTY. REMARKS  
DEPTH METER ASSY. ...................................................... 1 ...... INCLUDES ITEMS W/  
*
2
560025  
584025  
110031  
583059  
460019  
973752  
1618  
125039  
540011  
926149  
933240  
10024  
KNOB, SAW DEPTH INDICATOR  
STUD, 1/4-20X1 3/4" B7 NO PLATE  
POINTER, CONCRETE SAW DEPTH  
SHIM, 0.375 OD x 0.251 ID x 0.020 THICK  
FLANGE BEARING, 0.25 ID X 0.75 OD  
SCREW, BHSC,1/4-20 x 5/8 SS  
NUT, NYLOC 10-24  
U-BRACKET W/A, SAW DEPTH INDICATOR  
PULLEY, CABLE 1.25 OD  
SCREW, SHDLR 1/4D X 5/16L ,10-24,SCKT HD  
WASHER, FLAT SAE 1/4 GRD 9 YZ  
NUT, NYLOC 1/4-20  
SCREW, SHC 1/4-20 x 1/2  
SCREW, HHC 1/4-20 X 3/4  
SCREW, HHC 1/4-20 x .5  
NUT, HEX FINISH 1/4-20  
TAB W/A, DEPTH INDICATOR  
SCREW, SHC 8-32 x 3/4  
AXLE, INDICATOR SHEAVE  
NUT, NYLOC 8-32  
CABLE, DEPTH INDICATOR  
SPRING, EXTENSION, DEPTH INDICATOR  
1
1
1
5
1
1
3
1
8
6
4
1
1
1
1
1
1
3
2
3
1
1
*
3
*
4
*
5
*
6
*
7
*
8
*
9
*
10  
*
11  
12  
13  
14  
*
*
*
*
923201  
0131 A  
1579  
15%  
16%  
17%  
18%  
19%  
20%  
21%  
22%  
23%  
24  
949  
120243  
923116  
160013  
13287  
440012  
565004  
25538  
DEPTH METER CABLE ASSY........................................... 1 ...... INCLUDES ITEMS W/%  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEPTH STOP CYLINDER/VALVE ASSY.  
DEPTH STOP CYLINDER/VALVE ASSY.  
PAGE 74 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEPTH STOP CYLINDER/VALVE ASSY.  
DEPTH STOP CYLINDER/VALVE ASSY.  
NO.  
1
PART NO.  
446024  
446024-1  
368817  
447008  
480003  
25675  
PART NAME  
QTY.  
REMARKS  
VALVE, DEPTH STOP FLOW CONTROL ............ 1 ........... INCLUDES ITEMS W/*  
2*  
3
PANEL MOUNT KIT, VALVE  
FITTING, 90 4MJ-4MO  
DEPTH STOP CYLINDER  
SEAL, OIL CR-9815  
FITTING, BRASS BREATHER VENT 1/4" NPT  
FITTING, BLEEDER VALVE  
FITTING, STR 4MJ-4MO  
PIN, COTTER 1/8 X 1-3/4  
PIN, CLEVIS 3/4 X 2  
DEPTH STOP CYLINDER PIN  
DEPTH STOP CYLINDER SPACER  
5/16-24 X 5/8" SQUARE HEAD SET SCREW  
FITTING, ORIFICE 4MJ-6MO X .020  
HOSE ASSY, 24.2" #4 HP  
1
2
1
2
1
1
1
1
1
1
1
1
1
1
4
5
6
7
25632  
8
21095  
9
965079  
966166  
169004  
583061  
926064  
25718  
10  
11  
12  
13  
14  
16  
25971  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRONT AXLE ASSY.  
FRONT AXLE ASSY.  
PAGE 76 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRONT AXLE ASSY.  
FRONT AXLE ASSY.  
NO.  
2
3
4
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
19  
20  
21  
22  
23  
PART NO.  
4702  
583096  
960105  
912311  
25599  
485002  
915001  
508005  
06505008  
933246  
576003  
460002  
500006  
35107  
PART NAME  
QTY.  
8
2
1
2
2
2
6
2
2
11  
2
8
2
1
2
2
2
REMARKS  
NUT, HEX FINISH 5/8-11  
BEARING BACKING PLATE  
1/4-28 GREASE ZERK  
5/8-11 X 2 HCS  
BEARING, FRONT AXLE PIVOT  
SEAL  
1/4-20 X 1/2 HCS YZ8  
8 X 3WHEEL COVER  
5/8-11 X 1 HCS YZ8  
5/8 SAE FLAT WASHERYZ9  
SNAP RING, HO-185  
BEARING  
8 X 3 WHEEL  
FRONT AXLE 6457-48", WA  
SCREW, SQHS,CP 5/16-24 X 5/8  
NUT, HEX FINISH 1/2-13  
SCREW, HHC 1/2-13 X 2 FULL THREAD  
SCREW, 5/8-11 X 1-1/2 HCS YZ8  
5/8-11 X 2 HCS YZ8  
926064  
968011  
19400  
21376  
915311  
4
2
2
915309  
SCREW, 5/8-11 X 1-1/2 HCS YZ8  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CABLE MOUNT ASSY.  
CABLE MOUNT ASSY.  
PAGE 78 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CABLE MOUNT ASSY.  
CABLE MOUNT ASSY.  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
35203  
PART NAME  
CABLE MOUNT GROUP,6000-6400  
PULLY, POINTER ROPE  
QTY.  
REMARKS  
1
1
1
1
2
2
1
2
1
1
1
1
1
540039  
544002  
125043-3  
940674  
933241  
0948  
10136  
939654  
4514  
SHOULDER, ADAPTER  
RETAINER, SAW POINTER CABLE  
SCREW, HHC M8-1.25 X 30MM GRADE 10.9  
WASHER, FLAT SAE 5/16 GRD 9 YZ  
WASHER, FLAT SAE 1/4  
WASHER, FLAT SAE 3/8  
9
SCREW, SHC M12-1.75x30MM 12.9 NP  
SCREW, HHC 1/4-20 X 5/8 GR 5  
SCREW, HHC 3/8-16 X 2  
NUT, NYLOC 3/8-16  
MOUNT W/A CABLE GUIDE  
10  
11  
12  
13  
1665  
10133  
125043  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WIRING HARNESS/CIRCUIT BREAKER ASSY.  
WIRING HARNESS/CIRCUIT BREAKER ASSY.  
PAGE 80 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WIRING HARNESS/CIRCUIT BREAKER ASSY.  
WIRING HARNESS/CIRCUIT BREAKER ASSY.  
NO.  
1
2
3
4
5
6
7
8
PART NO.  
933242  
10133  
406012  
25935  
933076  
923201  
406019  
35436  
PART NAME  
QTY.  
REMARKS  
WASHER  
1
1
1
3
2
2
3
1
NUT, NYLOC 3/8-16  
MOUNTING BAR, CIRCUIT BREAKER  
NUT, HEX 10-32 W/STAR WASHER  
WASHER, FLAT SAE #12 ZINC  
SCREW, SHC 1/4-20 X 1/2  
CIRCUIT BREAKER, 10 AMP  
HARNESS  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATER PUMP KIT ASSY.  
WATER PUMP KIT ASSY.  
(CUT TO LENGTH)  
15  
14  
13  
12  
15  
1
INLET  
(CUT TO LENGTH)  
8
7
9
7
8
4
REMOVE PLASTIC SWITCH-BLANK  
ON CONTROL PANEL (NEXT TO  
WATER VALVE) AND  
2
INSTALL SWITCH  
5
3
6
11  
10  
PAGE 82 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATER PUMP KIT ASSY.  
BELT DRIVE WITH WATER PUMP ASSY.  
NO.  
1
PART NO.  
342000  
120089  
35116  
406000  
521006  
521016  
367021  
25931  
PART NAME  
QTY.  
1
REMARKS  
JABSCO WATER PUMP  
2
BACKING PLATE, WATER PUMP  
JACKSHAFT W/A, W/WATER PUMP OPTION  
ROCKER SWITCH  
AX 35 BELT  
AX 43 BELT  
16 M NPT HOLLOW HEX PLUG  
FITTING, 90 8BARB - 1/2 MP (4390-8-8)  
FITTING, PETCOCK RAD DRAIN 1/4MP  
SCREW, HHC 3/8-16 X 1 1/4 GR 5  
WASHER, FLAT SAE 3/8 GRD 9 YZ  
SEAL, WEATHERPACK 16-18 GA, GREEN  
CONNECTOR, WEATHERPACK 2 MALE PIN  
FITTING, PETCOCK RAD DRAIN 1/4MP  
HOSE, #8 LP - 40"  
1
3
1
4
1
5
1
6
1
7
1
8
1
9
369970  
1023  
1
10  
11  
12  
13  
14  
15  
2
933242  
12171  
2
2
12176  
1
12179  
2
35080  
2
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GEARBOX SEAL KIT ASSY.  
GEARBOX SEAL KIT ASSY.  
PAGE 84 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GEARBOX SEAL KIT ASSY.  
GEARBOX SEAL KIT ASSY.  
NO  
1
PART NO  
TBD  
PART NAME  
QTY.  
REMARKS  
SEAL KIT ...............................................1........................ INCLUDES ITEMS BELOW  
576006  
925382  
480006  
480007  
578135  
SNAP RING, SH-196  
SCREW, SHS 1/4-20 X 1/2  
SEAL, OIL CR-28655  
SEAL, OIL CR-19599  
O-RING, SIZE 135, VITON  
2
6
1
2
2
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BUSHING EXTENSION KITS ASSEMBLY  
BUSHING EXTENSION KITS ASSEMBLY  
PAGE 86 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BUSHING EXTENSION KITS ASSEMBLY  
BUSHING EXTENSION KITS ASSEMBLY  
NO.  
PART NO.  
926949  
180003  
582032  
90123445  
915319  
18501  
926950  
180003  
582033  
90123445  
915319  
18502  
PART NAME  
DOWEL PIN, 3/8" X 2-1/4  
COLLAR, OUTER  
QD BUSHING, 3/8" - 3/4"  
5/8"-11 X 4 LH HEX BOLT  
5/8"-11 X 4 RH HEX BOLT  
BUSHING EXTENSION KIT (.375" — .75") ............. 1 ........... INCLUDES ITEMS W/  
DOWEL PIN, 3/8" X 2-1/2  
COLLAR, OUTER  
QD BUSHING, 3/4" - 1-1/8  
5/8"-11 X 4 LH HEX BOLT  
5/8"-11 X 4 RH HEX BOLT  
QTY.  
REMARKS  
1
*
2
*
3
*
4
*
5
*
6
1
1
1
1
1
*
7
8
9
10  
11  
12  
#
#
#
1
1
1
1
1
#
#
BUSHING EXTENSION KIT (.75" — 1.125") ........... 1 ........... INCLUDES ITEMS W/  
#
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COLLAR/FLANGE PULLER ASSY. (OPTION)  
COLLAR/FLANGE PULLER (OPTION)  
PAGE 88 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COLLAR/FLANGE PULLER ASSY. (OPTION)  
COLLAR/FLANGE PULLER (OPTION)  
NO.  
PART NO.  
584037  
584038  
2549  
25138  
18503  
PART NAME  
QTY.  
REMARKS  
1
*
2
*
3
*
4
*
5
OUTER PULLER  
1
1
2
1
PLATE, PULLER  
SCREW, HHC 1/2"-13 X3  
SCREW, HHC 5/8"-11 X5 TAP  
COLLAR/FLANGE PULLER ASSY. ... 1 ...............INCLUDES ITEMS W/  
*
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SEAL SLEEVE PULLER ASSY. (OPTION)  
COLLAR/FLANGE PULLER (OPTION)  
PAGE 90 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SEAL SLEEVE PULLER ASSY. (OPTION)  
COLLAR/FLANGE PULLER (OPTION)  
NO.  
1
2
3
*
4
5
*
6
*
7
*
8
*
9
PART NO.  
35163  
M18505  
35162  
584049  
35161  
937980  
35164  
PART NAME  
QTY.  
REMARKS  
SCREW, HHC 3/8 – 16 X 4 FULL THREAD  
1
SEAL SLEEVE & THRUST WASHER PULLER ASSY........ 1 ........... INCLUDES ITEMS W/  
*
SCREW, 10 - 24 X 6 FULL THREAD  
SEAL INSTALLATION TOOL  
SCREW, 10 - 24 X 12 FULL THREAD  
NUT, WELD 10 - 24  
SCREW, HHC 1/4 – 20 X 5  
SCREW, HHC 1/4 – 20 X 10  
TOOL, SEAL REMOVAL  
2
1
2
2
3
3
1
35165  
584050  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOOLS  
TOOLS  
2
1
3
PAGE 92 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TOOLS  
TOOLS  
NO.  
1
PART NO.  
584015  
584011  
15503  
PART NAME  
QTY.  
REMARKS  
BLADESHAFT SHIFT WRENCH W/A, 6457  
15-16 BLADEWRENCH  
1
1
2
2
3
KNOB, COMFORT GRIP  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TERMS AND CONDITIONS OF SALE — PARTS  
5. Parts must be in new and resalable  
condition, in the original Multiquip  
package (if any), and with Multiquip part  
numbers clearly marked.  
Multiquip reserves the right to quote and  
sell direct to Government agencies, and to  
Original Equipment Manufacturer accounts  
who use our products as integral parts of their  
own products.  
PAYMENT TERMS  
Terms of payment for parts are net 30 days.  
FREIGHT POLICY  
6. The following items are not returnable:  
All parts orders will be shipped collect or  
prepaid with the charges added to the invoice.  
All shipments are F.O.B. point of origin.  
Multiquip’s responsibility ceases when a  
signed manifest has been obtained from the  
carrier, and any claim for shortage or damage  
must be settled between the consignee and  
the carrier.  
a. Obsolete parts. (If an item is in the  
price book and shows as being  
replaced by another item, it is  
obsolete.)  
SPECIAL EXPEDITING SERVICE  
A $35.00 surcharge will be added to the  
invoice for special handling including bus  
shipments, insured parcel post or in cases  
where Multiquip must personally deliver the  
parts to the carrier.  
b. Any parts with a limited shelf life  
(such as gaskets, seals, “O” rings,  
and other rubber parts) that were  
purchased more than six months  
prior to the return date.  
LIMITATIONS OF SELLER’S LIABILITY  
MINIMUM ORDER  
Multiquip shall not be liable hereunder for  
damages in excess of the purchase price of  
the item with respect to which damages are  
claimed, and in no event shall Multiquip be  
liable for loss of profit or good will or for any  
other special, consequential or incidental  
damages.  
The minimum charge for orders from Multiquip  
is $15.00 net. Customers will be asked for  
instructions regarding handling of orders not  
meeting this requirement.  
c. Any line item with an extended  
dealer net price of less than  
$5.00.  
d. Special order items.  
RETURNED GOODS POLICY  
e. Electrical components.  
f. Paint, chemicals, and lubricants.  
g. Decals and paper products.  
h. Items purchased in kits.  
Return shipments will be accepted and  
credit will be allowed, subject to the following  
provisions:  
LIMITATION OF WARRANTIES  
No warranties, express or implied, are  
made in connection with the sale of parts or  
trade accessories nor as to any engine not  
manufactured by Multiquip. Such warranties  
made in connection with the sale of new,  
complete units are made exclusively by a  
statement of warranty packaged with such  
units, and Multiquip neither assumes nor  
authorizes any person to assume for it  
any other obligation or liability whatever in  
connection with the sale of its products. Apart  
from such written statement of warranty,  
there are no warranties, express, implied or  
statutory, which extend beyond the description  
of the products on the face hereof.  
1. A Returned Material Authorization  
must be approved by Multiquip prior to  
shipment.  
7. The sender will be notified of any material  
received that is not acceptable.  
8. Such material will be held for five  
working days from notification, pending  
instructions. If a reply is not received  
within five days, the material will be  
returned to the sender at his expense.  
2. To obtain a Return Material Authorization,  
a list must be provided to Multiquip  
Parts Sales that defines item numbers,  
quantities, and descriptions of the items  
to be returned.  
9. Credit on returned parts will be issued  
at dealer net price at time of the original  
purchase, less a 15% restocking  
charge.  
a. The parts numbers and descriptions  
must match the current parts price  
list.  
b. The list must be typed or computer  
generated.  
10. In cases where an item is accepted, for  
which the original purchase document  
can not be determined, the price will be  
based on the list price that was effective  
twelve months prior to the RMA date.  
c. The list must state the reason(s)  
for the return.  
Effective: February 22, 2006  
d. The list must reference the sales  
order(s) or invoice(s) under  
which the items were originally  
purchased.  
11. Credit issued will be applied to future  
purchases only.  
PRICING AND REBATES  
e. The list must include the name  
and phone number of the person  
requesting the RMA.  
Prices are subject to change without prior  
notice. Price changes are effective on a  
specific date and all orders received on or  
after that date will be billed at the revised price.  
Rebates for price declines and added charges  
for price increases will not be made for stock  
on hand at the time of any price change.  
3. AcopyoftheReturnMaterialAuthorization  
must accompany the return shipment.  
4. Freight is at the sender’s expense. All  
parts must be returned freight prepaid to  
Multiquip’s designated receiving point.  
PAGE 94 — SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
SP6457 SERIES SAW — PARTS MANUAL — REV. #3 (11/29/10) — PAGE 95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS MANUAL  
HERE’S HOW TO GET HELP  
PLEASE HAVE THE MODEL AND SERIAL  
NUMBER ON-HAND WHEN CALLING  
UNITED STATES  
Multiquip Corporate Office  
MQ Parts Department  
18910 Wilmington Ave.  
Carson, CA 90746  
Contact: [email protected]  
Tel. (800) 421-1244  
Fax (800) 537-3927  
800-427-1244  
310-537-3700  
Fax: 800-672-7877  
Fax: 310-637-3284  
Service Department  
Warranty Department  
800-421-1244  
310-537-3700  
Fax: 310-537-4259  
Fax: 310-943-2238  
800-421-1244  
310-537-3700  
Fax: 310-537-1173  
Technical Assistance  
^^^^^*^^^^^^^^^^^^^^^^^^^^^^^^^*^6668  
800-478-1244  
MEXICO  
UNITED KINGDOM  
MQ Cipsa  
Multiquip (UK) Limited Head Office  
Carr. Fed. Mexico-Puebla KM 126.5  
Momoxpan, Cholula, Puebla 72760 Mexico  
Contact: [email protected]  
Tel: (52) 222-225-9900  
Fax: (52) 222-285-0420 Globe Lane,  
Unit 2, Northpoint Industrial Estate, Tel: 0161 339 2223  
Fax: 0161 339 3226  
Dukinfield, Cheshire SK16 4UJ  
Contact: [email protected]  
CANADA  
Multiquip  
4110 Industriel Boul.  
Laval, Quebec, Canada H7L 6V3  
Contact: [email protected]  
Tel: (450) 625-2244  
Tel: (877) 963-4411  
Fax: (450) 625-8664  
© COPYRIGHT 2010, MULTIQUIP INC.  
Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property  
of their respective owners and used with permission.  
This manual MUST accompany the equipment at all times.This manual is considered a permanent part of the equipment and should remain with the unit if resold.  
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in  
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published  
in this publication at any time without notice and without incurring any obligations.  
Your Local Dealer is:  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miglia Technology Satellite TV System Alchemy TV User Manual
NEC Projector LT10 User Manual
NEC Projector MT810 User Manual
NeumannBerlin Microphone GFM 132 User Manual
Newcon Optik Hunting Equipment 15 45X60 User Manual
NordicTrack Home Gym NTCCC69023 User Manual
Omnimount TV Mount 10035 User Manual
Oregon Scientific Conference Phone OS200 User Manual
Palsonic Flat Panel Television TFTV 510 User Manual
Paragon Furnace W13 User Manual