OPERATION AND PARTS MANUAL
Vibratory
Walk-Behind Roller
Model
MDR-9DYE
(Yanmar Diesel)
Revision #0 (12/19/03)
MULTIQUIPINC.
18910 WILMINGTON AVE.
PARTS DEPARTMENT:
800-427-1244
CARSON, CALIFORNIA 90746 FAX: 800-672-7877
310-537-3700
800-421-1244
SERVICE DEPARTMENT/TECHNICAL ASSISTANCE:
800-478-1244
FAX:310-537-3927
FAX:310-631-5032
Atlanta • Boise • Dallas • Houston • Newark
Montreal, Canada • Manchester, UK
Rio De Janiero, Brazil • Guadalajara, Mexico
Download from Www.Somanuals.com. All Manuals Search And Download.
HERE'S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
MULTIQUIP’SMAINPHONENUMBERS
800-421-1244
310-537-3700
FAX: 310-537-3927
PARTSDEPARTMENT
800-427-1244
310-537-3700
FAX: 800-672-7877
FAX: 310-637-3284
MAYCOPARTS
800-306-2926
310-537-3700
FAX: 800-672-7877
FAX: 310-637-3284
SERVICEDEPARTMENT
800-478-1244
310-537-3700
FAX: 310-537-4259
MQPOWERSERVICEDEPARTMENT
800-835-2551
310-537-3700
FAX: 310-638-8046
TECHNICALASSISTANCE
800-478-1244
FAX: 310-631-5032
WARRANTYDEPARTMENT
800-421-1244, EXT. 279 FAX: 310-537-1173
310-537-3700, EXT. 279
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
MIKASA MDR-9DYE-
VIBRATORY ROLLER
Yanmar L100EE-
DEVMK2 Engine
Proposition 65 Warning ..............................................2
Here's How To Get Help .............................................3
Table Of Contents ......................................................4
Parts Ordering Procedures ........................................5
Safety Message Alert Symbols .............................. 6-7
Rules for Safe Operation ....................................... 8-9
Operation and Safety Decals ...................................10
Specifications ...........................................................11
Dimensions ..............................................................12
General Information ........................................... 14-15
Vibratory Roller Components...................................16
Yanmar Engine Components ...................................17
Inspection.......................................................... 18-19
Operation ........................................................... 21-23
Maintenance ...................................................... 24-29
Troubleshooting ................................................. 30-31
Explanation Of Code In Remarks Column ...............32
Suggested Spare Parts ............................................33
Cylinder Block Assembly ....................................66-67
Cylinder Head and Cover Assembly ..................68-69
Muffler Assembly ...............................................70-71
Air Cleaner Assembly.........................................72-73
Crankshaft, Piston and Camshaft Assembly .....74-75
Lub. Oil Pump and Governor Assembly .............76-77
Cooling and Starting Device Assembly..............78-79
Fuel Injection Pump Assembly...........................80-81
Fuel Tank and Fuel Line Assembly ....................82-83
Starting Motor and Dynamo Assembly ..............84-85
Tool Label and Gasket Set Assembly ................86-87
Terms and Conditions Of Sale — Parts .................. 88
PARTS ILLUSTRATIONS
Decal Placement ................................................ 34-35
Body Assembly .................................................. 36-37
Front Cover Assembly........................................ 38-41
Axle Assembly .................................................... 42-45
Transmission Assembly...................................... 46-47
Hydraulic Oil Tank Assembly ............................. 48-49
Clutch Box Assembly ......................................... 50-53
Vibrator Assembly .............................................. 54-55
Upper Control Handle Assembly........................ 56-59
Lower Control Handle Assembly........................ 60-61
Battery Assembly ............................................... 62-63
Ignition Switch/Mounting Plate Assembly .......... 64-65
Specification and part
number are subject to
change without notice.
PAGE 4 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS ORDERING PROCEDURES
When ordering parts,
please supply the following information:
❒
Dealeraccountnumber
❒
❒
❒
❒
❒
❒
Dealernameandaddress
Shipping address (if different than billing address)
Returnfaxnumber
Applicable model number
Quantity,part number and description of each part
Specifypreferredmethodofshipment:
Note:Unlessotherwiseindicatedbycustomer, all
orders are treated as “Standard Orders”, and will
ship within 24 hours.We will make every effort to
ship “Air Shipments” the same day that the order is
received, if prior to 2PM west coast time. “Stock
Orders” must be so noted on fax or web forms.
✓
✓
✓
✓
✓
✓
FedEx or UPS Ground
FedEx or UPS Second Day or Third Day
FedEx or UPS Next Day
Federal Express Priority One
DHL
Truck
Place Your Parts Order Via Web or Fax
For Even More Savings!
Here’s how to get help...
Please have the model and serial number on
hand when calling.
Parts Department
800-427-1244
310-537-3700
Fax:800-672-7877
Fax:310-637-3284
Extra Discounts!
All parts orders which include complete part numbers
and are received by our automated web parts order
system, or by fax qualify for the following extra
discounts:
Mayco Parts
800-306-2926
310-537-3700
Fax:800-672-7877
Fax:310-637-3284
Ordered
via
Standard
orders
Stock orders
($750 list and above)
Service Department
800-478-1244
310-537-3700
Fax:310-537-4259
Fax
3%
5%
10%
10%
Web
MQ Power Service Department
800-835-2551
310-537-3700
Fax:310-638-8046
Special freight allowances
when you order 10 or more
line items via Web or Fax!**
FedEx Ground Service at no charge for freight
Technical Assistance
800-478-1244
Fax:310-631-5032
Fax:310-537-1173
Warranty Department
800-421-1244, Ext. 279
310-537-3700, Ext. 279
No other allowances on freight shipped by any other
carrier.
Multiquip’s Main Phone Numbers
NOTE:DISCOUNTSARESUBJECTTOCHANGE
800-421-1244
310-537-3700
Fax:310-537-3927
Direct TOLL-FREE access
to our Parts Department:
Toll-free nationwide — 800-427-1244
MULTIQUIP INC.
18910 WILMINGTON AVENUE
POST OFFICE BOX 6254
CARSON, CALIFORNIA 90749
310-537-3700•800-421-1244
FAX:310-537-3927
WWW:multiquip.com
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — SAFETY MESSAGE ALERT SYMBOLS
HAZARD SYMBOLS
FORYOUR SAFETY ANDTHE SAFETY OF OTHERS!
Safety precautions should be followed at all times when
operating this equipment. Failure to read and understand the
Safety Messages and Operating Instructions could result in
injury to yourself and others.
Lethal Exhaust Gases
This Owner's Manual has
been developed to provide
complete instructions for the
Engine exhaust gases contain poisonous
carbon monoxide. This gas is colorless and
odorless, and can cause death if inhaled.
NEVER operate this equipment in a confined
area or enclosed structure that does not
provide ample free flow air.
safe and efficient operation
of the Multiquip Model
MDR-9DYEVibration Roller.
Refer to the engine
manufacturer’s instructions for
data relative to its safe
operation.
Explosive Fuel
Before using this vibratory roller, ensure that the operating
individual has read and understands all instructions in this
manual.
Diesel fuel is extremely flammable, and its
vapors can cause an explosion if ignited. DO
NOT start the engine near spilled fuel or
combustible fluids. DO NOT fill the fuel tank
while the engine is running or hot. DO NOT
overfill tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or
sparks from the ignition system. Store fuel in
approved containers, in well-ventilated areas
and away from sparks and flames. NEVER
use fuel as a cleaning agent.
SAFETY MESSAGE ALERT SYMBOLS
The three (3) Safety Messages shown below will inform you
about potential hazards that could injure you or others. The
Safety Messages specifically address the level of exposure to
the operator, and are preceded by one of three words: DANGER,
WARNING, or CAUTION.
Burn Hazards
DANGER: You WILL be KILLED or
SERIOUSLY injured if you do not follow
directions.
Engine components can generate extreme heat.
To prevent burns, DO NOT touch these areas
while the engine is running or immediately after
operations. Never operate the engine with heat
shields or heat guards removed.
WARNING: You CAN be KILLED or
SERIOUSLY injured if you do not follow
directions.
Rotating Parts
CAUTION: You CAN be injured if you
do not follow directions.
NEVER operate equipment with covers, or
guards removed. Keep fingers, hands, hair and
clothing away from all moving parts to prevent
injury.
Potential hazards associated with this vibratory roller operation
will be referenced with Hazard Symbols which appear
throughout this manual, and will be referenced in conjunction
with Safety Message Alert Symbols.
PAGE 6 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — SAFETY MESSAGE ALERT SYMBOLS
Accidental Starting
Respiratory Hazard
ALWAYS place the engine ON/OFF switch in
the OFF position, when the vibration roller is
not in use.
ALWAYS wear approved respiratory
protection.
Equipment Damage Messages
Sight and Hearing hazard
Other important messages are provided throughout this manual
to help prevent damage to your vibration roller, other property,
or the surrounding environment.
ALWAYS wear approved eye and
hearing protection.
This vibratory roller, other
property, or the surrounding
environment could be
damaged if you do not follow
instructions.
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — RULES FOR SAFE OPERATION
CAUTION:
Failure to follow instructions in this manual
may lead to serious injury or even death!This
equipment is to be operated by trained and
qualified personnel only! This equipment is
for industrial use only.
■
NEVER touch the hot exhaust manifold,
muffler or cylinder. Allow these parts to
cool before servicing engine orvibratory
roller.
The following safety guidelines should always be used when
operating the MIKASA MDR-9DYEVibratory Roller.
■
■
HighTemperatures – Allow the engine to cool before adding
fuel or performing service and maintenance functions. Contact
with hot components can cause serious burns.
The engine of this vibratory roller requires an adequate free
flow of cooling air. NEVER operate the vibratory roller in any
enclosed or narrow area where free flow of the air is restricted.
If the air flow is restricted it will
cause serious damage to the
vibratory roller or engine and
may cause injury to people and
property.Remember the roller’s
GENERAL SAFETY
■
■
■
DO NOT operate or service this equipment before
readingthisentiremanual.
This equipment should not be operated by
persons under 18 years of age.
NEVER operate this equipment without proper
protective clothing, shatterproof glasses, steel-
toed boots and other protective devices required
by the job. ALWAYS wear slip resistant safety
shoes or boots.
enginegivesoff DEADLY gases.
■
■
ALWAYS refuel in a well-ventilated area, away from sparks
and open flames.
■
■
■
NEVER operate this equipment when not feeling
well due to fatigue, illness or taking medicine.
ALWAYS use extreme caution when working with flammable
liquids. When refueling, stop the engine and allow it to cool.
DO NOT smoke around or near the machine. Fire or
explosion could result from fuel vapors, or if fuel is spilled on
a hot engine.
NEVER operate this equipment under the
influence or drugs or alcohol.
■
NEVER operate the vibratory roller in an explosive
atmosphere or near combustible
materials. An explosion or fire could
result causing severe bodily harm or
even death.
NEVER use accessories or attachments, which are not
recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.
■
■
■
Manufacturer does not assume responsibility for any accident
due to equipment modifications.
■
■
■
Topping-off to filler port is dangerous, as
it tends to spill fuel.
Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
ALWAYS store the vibratory roller in a clean, dry location out
of the reach of children.
ALWAYS wear proper respiratory (mask), hearing and eye
protection equipment when operating the vibratory roller.
NEVER run engine without air cleaner. Severe engine
damage may occur.
■
■
NEVER leave the vibratory roller unattended, turn off engine.
CAUTION must always be observed while servicing this
vibratory roller. Rotating parts can cause injury if contacted.
■
DO NOT leave vibratory roller with engine running. Use
chock blocks if parking vibratory roller on a grade.
PAGE 8 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — RULES FOR SAFE OPERATION
■
NEVER disconnect any "emergency or safety devices".
These devices are intended for operator safety. Disconnection
of these devices can cause severe injury, bodily harm or even
death! Disconnection of any of these devices will void all
warranties.
■
ALWAYS know the location of the nearest and first aid kit.
Loading and Unloading (Crane)
■
Before lifting, make sure that machine parts (hook and
vibration insulator) are not damaged and screws are not
loosened or lost.
■
In emergencies always know the location of the
nearest phone or keep a phone on the job site.
Also know the phone numbers of the nearest
ambulance, doctor and fire department. This
information will be invaluable in the case of an
emergency.
■
Always make sure crane or lifting device has been properly
secured to the hook of guard frame on vibratory roller.
■
■
■
■
NEVER lift the machine while the engine is running.
Use adequate lifting cable (wire or rope) of sufficient strength.
Use one point suspension hook and lift straight upwards.
NEVER allow any person or animal to stand underneath the
machine while lifting.
■
Try not to lift machine to unnecessary heights.
Transporting
■
■
Always shutdown engine before transporting.
Tighten fuel tank cap securely and close fuel cock to prevent
fuel from spilling.
■
■
Drain fuel when transporting vibratory roller over long
distances or bad roads.
Always tie-down the vibratory roller during transportation by
securing the roller's guard frame with rope.
Emergencies
ALWAYS know the location of the nearest fire extinguisher.
Maintenance Safety
■
■
NEVER lubricate components or attempt service on a
running machine.
■
ALWAYS allow the machine a proper amount of time to
cool before servicing.
■
■
Keep the machinery in proper running condition.
Fix damage to the machine immediately and always replace
broken parts.
■
Dispose of hazardous waste properly. Examples of
potentially hazardous waste are used motor oil, fuel and
fuel filters.
■
■
DO NOT use food or plastic containers to dispose of
hazardous waste.
DO NOT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — OPERATION AND SAFETY DECALS
Figure 1 displays the operation and safety decals as they appear on the vibratory roller. Should any of these decals become
damaged or unreadable, contact the Multiquip Parts Department for a replacement set.
Figure 1. Operation and Safety Decals
PAGE 10 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — SPECIFICATIONS
Table 1. MDR-9DYE VIBRATORY ROLLER SPECIFICATIONS
Centrifugal Force
Vibration Frequency
Traveling Speed (forward and reverse)
Grade Ability
6,600 lbs. (3,000 kg)
3,000 vpm
0 to 1.8 mph (0 to 3 km/hr)
25°
Diameter x Width of Roller
Wheel Base
18 x 27.6 in (457 x 700 cm)
22.4 in (570 mm)
10.8 in (274 mm)
111.8 in (2,840 mm)
31.3 in (795 mm )
44.1 in (1,120 mm )
1,940 lbs. (880 kg)
2,000 rpm
Side Road Clearance
Length (with Handle)
Width
Height
Total Weight
Working Input Revolution
Continuous Rated Pressure
Oil Tank Capacity
Water Tank Capacity
Working Ability
1,500 psi (105 kg/cm2)
4 gallons (15 liters)
6 gallons (23 liters)
2,100 m2/hr
Table 2. ENGINE SPECIFICATIONS
Model
YANMAR L100EE-DEVMK2
Type
Air-cooled 4 stroke, Single Cylinder, Diesel Enginea
3.46 in. X 2.75 in.
(88 mm x 70 mm.)
Bore X Stroke
Displacement
Max Output
24.77 cu-in (406 cm3)
10.0 H.P./3600 R.P.M.
1.45 gallons (5.5 liters)
Diesel #2
Engine
Fuel Tank Capacity
Fuel
Lube Oil Capacity
Oil Alert System
Starting Method
1.75 quarts (1.65 liters)
Yes
Electric/Recoil Start
Dimension
(L x W x H)
16.4 x 18.5 X 19.4 in.
(417 X 470 X 494 mm.)
Dry Net Weight
116.6 lbs. (53 Kg.)
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — DIMENSIONS
Figure 2. MDR-9DYEVibratory Roller Dimensions
TABLE 3. ROLLER DIMENSIONS
REF.
A
DIMENSIONS
REF.
F
DIMENSIONS
111.8 in. (2.8 meters)
88 in. (2.23 meters)
46 in. (1.17 meters)
45.9 in. (1.16 meters)
11 in. (.279 meters)
22.4 in. (.57 meters)
18 in. (.457 meters)
15.5 in. (.382 meters)
5.4 in. (.137 meters)
B
G
C
H
I
D
E
PAGE 12 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE PAGE
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — GENERAL INFORMATION
FREQUENCY/SPEED
The Mikasa Model MDR-9DYE is a powerful compacting tool
capable of applying a tremendous force in consecutive impacts
to a soil surface. With 28-inch drums and 32 inches overall width,
virtually any asphalt or mixed granular soil compaction job is
quickly cut down to size.
The vibrating roller maximum frequency is 3000 vpm (vibrations
per minute).The forward and reverse travel speed of the vibratory
roller is approximately 1.8 mph (3 km/hour).
ENGINE
The impact force of the MDR-9DYE levels and uniformly
compacts voids between soil particles to increase dry density.
The Mikasa MDR-9DYE Vibratory Roller is equipped with a
YANMAR L100EE-DEVMK2.
Features include:
CONTROLS
„
Hydraulic variable speed transmission assures easy
handling.
Before starting the MDR-9DYE Vibratory Roller, identify and
understand the function of the controls and components as
indicated in Figure 6.
„
Deadman device which when pressed or hit will
cause the travel lever to return to neutral position
bringing the machine to a stop.
TRANSPORTATION
Adjustable transport hooks allow an operator to place the roller
on the tailgate of a dump truck without any assistance. The
control handle of the MDR-9DYEVibratory Roller can be folded
vertically for ease of transport and storage.
„
„
Non-corrosive water tank for the sprinkler system with a
capacity of 6 gallons.
Simple dual-lever controls assure operator safety and
convenience.
LIFTING THE ROLLER
„
„
„
Sight gauge for hydraulic oil tank.
Front -mounted auxiliary travel lever.
When lifting of the roller is required (Figure 3), attach a suitable
hook or shackle to the lifting hooks of the roller.Make sure the
lifting device is capable of lifting 1,940 lbs (880 kg).
Four large rubber shock mounts minimize vibrations to the
engine and hydraulics.
„
„
„
„
Convenient tie-downs, front and rear.
Scraper Bar.
Drum sprinkler system.
Handle folds to 90 degrees for storage and transport..
Figure 3. LiftingThe Roller
PAGE 14 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — GENERAL INFORMATION
CAUTION :
CAUTION :
Tipping (Rollovers)
NEVER! operate the roller on side slopes (Figure 5). The
possibility exist that the roller could tip over (roll over), thus
causing bodily harm even death and serious damage to the
equipment.
NEVER! stand under, or get onto the roller
while it is being lifted or moved.
ONLY! use steel ropes or chains that are
capable of lifting at least 1,940 lbs. (880 kg ).
CAUTION :
NEVER! use any other part of the roller for
lifting purposes. Use the lifting eye. Using other
parts of the roller for lifting will cause severe
damage to the roller,
Figure 5. Recommended Slope
In the event the roller does tip over, extreme care must be taken
to prevent damage to the engine. When the roller has been
tipped over, oil from the engine crankcase can flow into the
combustion chamber, which can severely damage the engine
the next time it is started.
OPERATING ON SLOPES
Special care must be taken when operating the roller on hills or
slopes. There exist the possibility of serious injury to the operator
and severe damage to the roller in the event of a roll over.
ALWAYS operate the roller up and down hills rater than from
side to side. For safe operation hillside slopes should not exceed
12 degree (21 % grade). See Figure 4 below.
IMMEDIATELY after a unit has tipped over upright the unit as
soon as possible to prevent oil from leaking into the combustion
chamber.
CAUTION :
To prevent damage to the engine after a
rollover, the unit must NOT be started.
NEVER start a unit after a rollover.CONTACT
your nearest authorized Multiquip dealer for
instructions or servicing.
NEVER! operate the roller on side
slopes. The roller may tip over
causing injury to personnel and
severe damage to the equipment
Figure 4. Recommended Slope
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 15
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE —VIBRATORY ROLLER COMPONENTS
Figure 6. MDR-9DY
Compo
Figure 6 illustrates the location of the major components
for the MDR-9D Vibratory Roller. The function of each
component is described below:
7. Engine – This vibratory roller uses a YANMAR L100EE-
DEVMK2 diesel engine. Refer to the owner’s manual for
engine information and related topics.
1. Handle Bar – When operating the roller, this handle is to
be in the downward position. When the roller is to be
stored, move the handle bar to the upright position.
8.
Vibrator Lever (on the body of machine) – Turns the
vibration on and off.
9. Water Tank – Holds 6 gallons (23 liters) of water for the
2. Hand Grip – When operating the roller, use this hand grip
to maneuver the roller. Also has dead man device, when
pressed or hit while traveling in reverse, causes the travel
lever to return to neutral position to stop the machine.
sprinkler system.
10. Shock Absorber -
11. Scraper Bar – This bar helps prevent buildup of material
between the drum and the frame.
3. Travel Lever – Push the lever forward, the roller will move
in a forward direction, pull the lever backwards, the roller
will move in backwards direction. Placing the lever in the
middle (midway) will cause the roller not to move (neutral).
12. Vibration Rollers – 18-inch diameter steel drums that
provide the compaction force in the compaction and
patching of asphalt-type surfaces.
13. Checking Cover for Chains –Take off the cover to check
4.
5.
Vibrator Lever – Turns the vibration on and off.
and lubricate chains.
Hydraulic OilTank/Cap – Stores hydraulic fluid.Open cap
to fill with recommended hydraulic oil (Shell Tellus #46).
14. WaterValves–Turn on the water sprinkling system.
15. Hydraulic Oil Gauge – Indicates the hydraulic oil level.
6. V-Belt Cover – Remove this cover to gain access to the
v-belts. NEVER run the vibratory roller without the v-belt
cover.If the v-belt cover is not installed, the possibility exist
that your hand may get caught between the v-belt and clutch,
thus causing serious injury and bodily harm.
PAGE 16 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — YANMAR L100EE-DEVMK2 ENGINE COMPONENTS
Figure 7. YANMAR L100EE-DEVMK2 Engine Components
ENGINE COMPONENTS
Figure 7 illustrates the location of the major engine
components of the Yanmar engine. Each component is
described below:
6.
Recoil Starter – Housing for pull rope and starter.
7. Oil Filler Cap/Dipstick – Remove this cap to add oil to the
oil tank. Use dipstick to check oil level.
1. Fuel Filler Cap – Remove this cap to add unleaded
gasoline to the fuel tank.Make sure cap is tighten securely.
DO NOT over fill.
8.
Oil Drain Plug – Unscrew plug to drain oil from engine
crankcase.Dispose of oil in a safe manner.
9. Decompression Lever – Press down before starting
engine.To prevent damage to the engine, DO NOT use for
any other purpose.
2. FuelTank – Diesel engine holds 5.8 quarts of diesel fuel.
3. Air Cleaner – Prevents dirt and other debris from entering
the fuel system. Remove wing-nut on top of air filter
cannister to gain access to filter element.
10. Fuel Cock – Controls the flow of diesel fuel to the engine.
Must be in the ON position when starting and running the
engine.
4. Muffler – Used to reduce noise and emissions.
5. Recoil Starter (pull rope) –Type of engine starting method.
Alternate type would be electric start (ignition key).
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 17
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — INSPECTION
3. If the oil level is low, fill to the edge of the oil filler
hole with the recommended oil type (Table 4).
Maximum oil capacity is 1.6 quarts (1.1 liters).
CAUTION :
Never operate the vibratory
roller in a confined area or
enclosed structure that
does not provide ample
free flow of air.
TABLE 4. OIL TYPE
Season
Summer
Spring/Fall
Winter
Temperature
25°C or Higher
25°C~10°C
Oil Type
SAE 10W-30
SAE 10W-30/20
SAE 10W-10
ALWAYS wear approved eye and hearing
protection before operating the vibratory roller.
BEFORE STARTING
0°C or Lower
1.
Read safety instructions at the beginning
of manual.
2.
Familiarize yourself with the operating
and control elements of the machine and
Explosive Fuel
the working environment. This includes obstacles in the
working area, bearing capacity of the ground and the
necessary safety provisions.
DANGER
Diesel fuel is highly flammable and can be
dangerousifmishandled.DONOTsmokewhile
refueling.DO NOT attempt to refuel the vibra-
tory roller if the engine is hot! or running.
3. Checktheairfilterfordirtanddust.Iftheairfilterisdirty, replace
air filter with a new one as required.
4.
5.
6.
Check fastening nuts and bolts for tightness. Loose threads
may cause damage to the machine when vibrating.
CHECKING FUEL
Understand the geographical features and regulations of
the job site.
1. Remove the fuel cap located on top of fuel tank.
2. Visuallyinspecttoseeiffuellevelislow. Iffuelislow,replenish
with diesel fuel (Figure 9).
Clean the vibratory roller, removing dirt and dust, particularly,
the bottom of the plate, engine cooling air inlet.
CHECKING ENGINE OIL LEVEL
3. Whenrefueling,besuretouseastrainerforfiltration.DONOT
top-off fuel.Wipe up any spilled fuel.
1. Make sure that the machine is situated in a flat
surface so that level measurements will be accurate.
2. Pull out the dipstick from the oil tank (Figure 8).
CAUTION :
DO NOT overfill oil tank. This could cause oil
leaks and sluggish operation. Clean cap and
surrounding area before opening to prevent dirt
from entering tank.
Figure 9. Refueling
DANGER
Fuel spillage on a hot engine can case a fire or
explosion. If fuel spillage occurs, wipe up the
spilled fuel completely to prevent fire hazards.
NEVER! smoke around or near the roller.
Figure 8. Oil Dipstick
PAGE 18 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — INSPECTION
CHECKINGTHE CLUTCH BOX OIL LEVEL
CHECKING HYDRAULIC SYSTEM
1.
2.
3.
Check clutch box for any oil leakage.
1. Check the oil tank level gauge (Figure 10). Oil level
should be at the middle indication of the gauge or
higher. Fill as required
Remove the level plug and check oil level (Figure 12).
Add oil if necessary.
2. Check the surroundings of the oil tank, hydraulic
pump and motor for oil leakage.
Figure 12. Clutch Box Oil Level Check
Figure 10. Hydraulic System Oil Level Gauge
CHECKINGTHEVIBRATOR OIL LEVEL
DANGER
1.
Remove the red filler plug and the oil level inspection hole
plug from the vibrator case (Figure 13).
ALWAYS keep hands and fingers away from
pinch points. DO NOT allow anyone to reach in
on dangerous sections of the machine to avoid
any accidents.
2.
Fill with oil until oil overflows from inspection hole.
CHECKING THE V-BELT
1. Check all bolts and screws and make sure all are
securely tightened.
2. Check V-belt for proper tension. The normal slack
should be approximately 1/8 inch (3 to 5 mm) when
the belts are forcibly depressed between the two
sheaves (Figure 11). Insufficient tension causes
weak vibration and machine damage.
Figure 13. Vibrator Oil Level Check
Figure 11. V-BeltTension
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 19
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — INSPECTION
POSITIONINGTHE HANDLE BAR
CHECKINGWATERTANK
1.
Release the handle bar release pin (Figure 15) and position
the handle bar to the lowered position before starting
operation.
1.
Check the water tank to see if filled. Add water if necessary.
The water tank has a capacity of approximately 6 gallons
(23 liters) (Figure 14).
2.
When machine is not in use, release the handle bar release
pin and position the handle bar to the upright position.
Figure 14. Water Tank Check
CAUTION :
Handle Bar
Release Pin
Be careful not to confuse the water tank with the
oil tank.
Figure 15. Handle Bar Positioning
INITIAL STARTUP (ENGINE)
CHECKING LEVERS
Electric Start
1.
Check travel and vibrator levers to make sure they are
functioning properly (Figure 6).
1.
On the handle bar:
A. Move the travel lever to the NEUTRAL position.
B. Move the vibrator lever to the OFF position.
2.
With travel lever placed in reverse, push the deadman
device and verify that the travel lever returns to neutral
position.The travel lever stays in neutral position once the
deadman device is released.
2. Open the fuel cock by turning it clockwise to the
down position (Figure 16).
CHECKING SCRAPER BAR
1.
Check scraper bar and make sure that they are not clogged
with mud, bent or damaged (Figure 6).
2.
Adjust clearance between drums and scrapers as
necessary.
CHECKING BOLTS, NUTS, AND SCREWS
1.
Check bolts, nuts, and screws on various parts of the
machine, including the engine, for proper tightness.
Figure 16. Open Fuel Cock
PAGE 20 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — OPERATION
3. Insert the starter key into the key switch and turn it to
the RUN position (Figure 17).
Figure 19. Decompression Lever
Figure 17. Starter Key
4. Turn the starter key further to the right to the START
position to start the engine.
5.
If the engine fails to start, DO NOT continue to rotate
the starter key for more than 5 seconds. Return the
key to the RUN position and wait 20 to 30 seconds
before starting again.
When starting with a motor
starter, a decompressor is
not normally required.
However, when ambient
temperature or battery
charger level is low, use of
a decompressor will help
make the start-up easier.
6. After starting the engine, continue to warm up the
engine for about 3 to 10 seconds especially in cold
weather.
Recoil Start
1. Open the fuel cock by turning it clockwise to the down
position (Figure 16).
2.
Pull the starting handle slowly until you feel some
resistance (Figure 18). Return handle to original
position.
Figure 18. Engine Start Handle
3. Push down the decompression lever (Figure 19).
4. Pull the starting handle hard and fast to start engine.
5. If the engine does not start, repeat steps
2 through 4.
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — OPERATION
TRAVELING
VIBRATING
CAUTION :
1. Shift the two vibrator levers (Figures 21 and 22) to the
vibrate position to start vibrations.
Make suretofollowallsafetyrulesreferencedin
thesafetysectionofthismanualbeforeoperating
roller. Keep work area clear of debris and other
objectsthatcouldcausedamage totherolleror
bodilyinjury.
1. To make the roller move in the forward direction push the
travel lever ( Figure 20) forward.This roller has a hydraulic
variable speed transmission. By moving the travel lever
varioysincrements,youcanvarythespeedfrom0to1.8mph
(0 to 3 km/hr).
Figure 21. Vibrator Lever
Figure 20.Travel Lever
2. Tomaketherollermoveinthereversedirectionpullthetravel
lever ( Figure 20) backwards.
Figure 22. Vibrator Lever (Body)
CAUTION :
3. Firmlygasptheroller'shandgrip,therollerwillbeginmoving
in the desired position when the direction lever has been
placed in the desired position.
Using vibration with clutch slipping causes
the clutch to burn. Also, vibration should
NOT be used over completely compacted
area, paved road surface, or with stationary
roller.
CAUTION :
DO NOT reduce speed during work. When
shifting travel lever from forward to reverse,
be sure to stop the lever at the neutral
position first before moving the lever to the
opposite direction. DO NOT shift the lever
from forward to reverse (or reverse to
forward) in one motion.
WATERING
1. To operate water sprinkling system, turn on the front and
rear water valves on the side of the roller.(Figure 23).
CAUTION :
After test travel, shut down engine and
check for any problems including oil
leakage. If any trouble is found, correct the
problem before attempting to operate the
roller again.
Figure 23.WaterValves
PAGE 22 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — OPERATION
LIFTING
STOPPING
1.
2.
3.
4.
5.
Use a crane or lift to load and unload the machine. A
skilled crane operator is required to perform the job.
1. Place the vibrator and travel levers to the neutral position.
2. Slow down the engine and allow to cool for at least 2
minutes. In an electric start, return the key switch to
the STOP position as soon as the engine stops.
When lifting the machine, check for any damaged or
loose bolts, lifting hooks, and shock mounts.
Check any damaged or loose bolts in the guard frame to
avoid machine sliding off.
CAUTION :
Neglecting to return the key switch to the
STOP position will cause the battery to
discharge, making start-up impossible the
next time.
Make sure that the machine is shut off before machine is
lifted.
Use reliable cable for lifting.
6. Always lift the machine vertically and keep the
machine away from workers and animals.
3. After the engine stops, close the fuel cock.
7.
Do not lift the machine higher than the required
height.
4. The hydraulic brake is automatically engaged when the
travel lever is in neutral position.When parked on a slope
with the engine turned off, place a block against the
roller drum to prevent the roller from moving.
UNLOADING
TRANSPORTING
1. Always make sure that the machine is shut off while
being transported.
1.
If you need to move the roller by pushing it manually
once engine is stopped, push in the upper and lower
knobs of the transmission check valve. This will
cause the hydraulic break to disengage and allow
the roller to be moved without causing damage
2. Check that the fuel cap is properly closed and
tightened.
3. When traveling long distances or on rugged terrain,
drain the fuel of the machine before transporting.
4. Tie down the machine securely on the
transportation so that it will not move or topple over.
Figure 24. Disengaging Hydraulic Brake
2. After moving, reset upper and lower knobs.
CAUTION :
NEVER tow roller with any type of vehicle.
Doing so will damage the hydraulic system.
NEVER perform unloading procedure on a
slope. This may cause roller to roll down if
parking brake or blocking is deficient.
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 23
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — MAINTENANCE
CAUTION:
CAUTION:
Fuel piping and connections should be
replaced every 2 years.
Inspection and other services should always
be carried out on hard and level ground with
the engine shutdown.
INSPECTION AND MAINTENANCE SERVICETABLES
TABLE 6. MDR-9DYE ENGINE CHECK
1. To make sure your plate vibratory roller is always in good
working condition before using, carry out the maintenance
inspection in accordance with Tables 5 through 7.
ITEM
HOURS OF OPERATION
Oil or Fuel Leak
Every 8 hours (every day)
Every 8 hours (every day)
TABLE 5. MDR-9DYE MACHINE INSPECTION
Tightness of Fastening
Threads
HOURS OF
ITEM
REMARKS
OPERATION
Every 8 hours (every day)
(Replenish to specified maximum
level)
Engine Oil Check and
Replenishment
Loose or Missing
Screws
Every 8 hours
(every day)
Every 8 hours
(every day)
After first 25 hours then every 50 to
100 hours
Damaged Parts
Engine Oil Replacement
Air Filter Cleaning
Function of Controlling
System Part
Every 8 hours
(every day)
Every 100 hours
See separate engine manual for details on engine check.
Chain Tension
Adjustment
Every 50 hours
See page 26
See page 28
Initially after 25
hours, then every
250 hours (2
months), every
500 hours (4
months), every
1,000 hours
DAILY SERVICE
z
Check for leakage of fuel or oil.
z
Check for loose screws including tightness. See Table 6
below (tightening torque ), for retightening:
Hydraulic Oil Filter
Replacement
thereafter.
TABLE 7. TIGHTENING TORQUE (in. kg/cm) DIAMETER
Initially, every 4 to
5 hours. After one
week, twice a day.
After 2 weeks,
Material 6mm 8mm 10mm 12mm 14mm 16mm 18mm
20mm
2,000
3,800
5,600
Hydraulic Oil Check
See page 27
4T
70
150
250
400
300
500
800
500
800
750
1,100
2,000
2,900
1,400
2,700
4,200
6-8T
11T
100
150
1,300
2,000
once a day.
1,200
Hydraulic Oil
Replacement
Every 1,000 to
1,500 hours
See page 27
See page 27
300~ 650 ~
350 700
*
100
* (In case counter-part is of aluminum)
(Threads in use with this machine are all right handed)
Material and quality of material is marked on each bolt, and screw.
Vibration Clutch Check
As necessary
CAUTION:
z
Remove soil and clean the bottom of roller.
These inspection intervals are for operation
under normal conditions. Adjust your inspection
intervals based on the number hours vibratory
roller is in use, and particular working conditions.
z
z
Check the levers, cables and linkage.
Check engine oil.
PAGE 24 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — MAINTENANCE
ENGINE OIL REPLACEMENT
1. Replace engine oil in the first 25 hours of operation and
every 50 to 100 hours afterwards.
2. Oil may be drained more easily when it is warm after
operation (For more details, see separate engine Owner's
Manual).
AIR FILTER
1. The air filter element should be cleaned because a clogged
air cleaner can cause poor engine starting, lack of power
and shorten engine life substantially.
Figure 27. ChainTightener
CAUTION:
NEVERattempttochecktheV-beltwiththeengine
running.Severeinjurycan occurifyourhandgets
caughtbetweentheV-beltandtheclutch(Figure
28).Alwaysusesafetygloves.
CLUTCH
PULLEY
Figure 25. Engine Air Filter and Element
2. To clean or replace air filter loosen the wing nut on the air
filter housing (Figure 25) remove the cover and take out air
filter cartridge. If only cleaning of the air filter is desired blow
through the air filter cartridge from the inside, moving a jet of
dry compressed air up and down until all dust is removed.
VIBRATOR
PULLEY
Figure 28. V-Belt Hazard
VIBRATION CLUTCH ADJUSTMENT
CHECKINGTHE CHAINS
1. Remove the protective cover from the clutch by removing
the 4 allen screws.
1. Take off the checking cover on roller and coat grease on the
chain if necessary (Figure 26. The chain should be lightly
lubricated with motor oil.
2. Pull out the stop key and turn to the release position (Figure
29).
3. Viewing the clutch from the shifter-pulley side: if the clutch
nut is turned to the right, the clearance between the adjusting
and pressure plate decreases as the amount of torque
increases. Normal adjustment is from 1 to 2 notches.
4. Make sure that the shifting lever is not too stiff. Lever should
engage with moderate pressure.
5. After adjustment, return the stop key to the locked position.
Figure 26. Chain Cover
2. Check the chain tension and if loose, adjust the chain tension
with the tightener (Figure 27). Chain tension should be
adjusted every 50 hours of operation.
Figure 29. Clutch Adjustment
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 25
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — MAINTENANCE
HYDRAULIC OIL CHECK
HYDRAULIC OIL FILTER CHECK
1. Check for any oil leakage from the hoses and joints daily.
1. The hydraulic oil filter should be replaced after first 25 hours
of operation.
2. Check hydraulic oil level every 4 to 5 hours after starting
operation.
2. After first replacement, it should be replaced after 250 hours
operation (2 months), every 500 hours of operation (4
months), and every 1,000 hours of operation thereafter.
3. After one week of operation, check hydraulic level twice a
day .
3. When the suction resistance exceeds 254 mmHg (oil
temperature in operation is 140 degrees F), replace filter.
4. After two weeks of operation, check hydraulic level once a
day .
4. To remove the oil filter, wind a cloth around the filter to prevent
slipping (Figure 31).
5. Replace hydraulic oil after first 200 hours and in every 1,000
hours of operation.
5. Tie a rope securely around the filter (Figure 31).
CAUTION:
Make sure hydraulic oil is at a normal safe
operating level. DO NOT over fill.
REPLACING HYDRAULIC OIL
1. Change the hydraulic oil every 1,000 to 1,500 hours of
operation. Change the hydraulic oil more often in high
ambient temperature operation.
2. Remove the drain plug and hose tank and drain the hydraulic
oil.
3. Reinstall the drain plug to the oil tank.
4. Open the tank cap (Figure 30) and fill tank with hydraulic oil.
(Capacity: About 4.5 gallons). Use ShellTellus Oil #46 or
equivalent.
Figure 31. Cloth and Rope Around Filter
6. Forcibly pull the rope to remove the filter (Figure 32).
Figure 32. Filter Removal
Figure 30. Hydraulic Oil Change
7. Immediately replace with new filter, screwing it on by hand
to avoid hydraulic oil leak.
5. After filling tank, tighten the tank cap firmly with a wrench.
CAUTION:
Use only genuine Mikasa
NOTE
replacement oil filters (10
micron filter paper. Do not use
automobile-type oil filters.
Make sure that dust , water, and other foreign
objects do not enter tank. It is recommended to
filter the oil through a cloth.
PAGE 26 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE—MAINTENANCE
HYDRAULIC AIR EXTRACTION
1. After filling hydraulic oil tank with oil, loosen the oil hose
joint and check that oil is enough to reach the oil suction
and outlet ports in the hydraulic transmission. Tighten the
hose joint securely after checking.
2. Loosen the charge relief valve located on the front side of
the hydraulic transmission (Figure 33).
Figure 34. Unscrewing Right Lock Nut
Figure 33. Loosening Charge Relief Valve
3. Check that oil flows out from the valve hole.
4. Replace the charge relief valve tightly.
5. With the travel and vibrator levers in neutral position, start
the engine and idle at low speed for 3 to 5 minutes.
Figure 35. Unscrewing Left Lock Nut
6. Check the forward and reverse rotation of the output shaft
by moving the travel lever slowly to its forward and reverse
positions.
3. If the machine moves forward, screw the turn-buckle
clockwise. If the machine moves backwards, screw the turn-
buckle counterclockwise (Figure 36).
7. Check the oil level gauge and make sure that there are no
air bubbles mixed in the oil. After checking, operate the roller
slowly at first then at full speed.
4. Screw back the lock nuts on the turn-buckle.
5. Start the engine and make sure that the roller does not inch
forward or backward at the neutral position of the travel
lever.
8. When oil level in the tank is low, replenish oil up to the
specified level, and screw the cap securely with a wrench.
9. If bubbles remain in the oil or foam is found, air is being
sucked through the suction side and should be checked.
NEUTRAL POSITION ADJUSTMENT
Once the travel lever has been set to neutral position with the
engine running, the hydraulic brake is operating and the roller
should not move. If the roller inches forward or backwards with
the lever in the neutral position, turn-buckle of the cable should
be adjusted as follows:
1. Stop the engine and set the travel lever in the neutral
position.
Figure 36. Adjusting the Turn-Buckle
2. Unscrew the two lock nuts on the sides of the cable (Figures
34 and 35).
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 27
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE—MAINTENANCE
If the neutral position of the travel lever and the neutral point of
transmission do not match after adjustment is repeated, align as
follows:
z
z
z
DO NOT close the exhaust outlet of battery.The gas pressure
building up in the battery may cause explosion.
Before using a battery charger, read and understand the
charger instruction manual thoroughly.
1. Loosen the hex socket head bolt M10 used for mounting the
control lever on the underside of the transmission (Figure
37).
Charge the battery in a non-spark, well-ventilated area. Avoid
fire from cigarette sparks or matches.
2. For forward movement, move the control lever slightly to the
left.
1. If a battery has not been used for some time, reduce
the charge level initially to protect each plate inside
the battery.
3. for backwards movement, move the control lever slightly to
the right.
2. Check the battery terminals periodically to ensure
that they are in good condition.
3. Use wire brush or sand paper to clean the battery
terminals.
4. Check battery for cracks or any other damage. If white
pattern appears inside the battery or paste has
accumulated at the bottom, replace the battery.
5. Measure the specific gravity of electrolyte:
z
z
completely charged: 1.270 - 1.290
needs charging: 1.260 or lower
Figure 37. Unscrewing Left Lock Nut
BATTERY MAINTENANCE
DANGER :
6. If the machine will not be in operation for a long
period of time, charge the battery sufficiently, tighten
all caps, correctly, store in cool dry place and check
the battery charge level every month to maintain the
performance of the battery.
Lead-acid battery contains
sulfuric acid, which may damage
eyes or skin on contact.
BATTERY CABLE CONNECTION
1.
When removing cable, disconnect the ground side
(normally negative) first (Figure 38).
2.
When installing cable connect the ground side (normally
negative) last.
FORYOUR SAFETY:
z
ALWAYS wear a face shield to avoid acid getting into the
eyes. If acid gets in contact with eyes, flush immediately with
clean water and get medical advice.
Negative
Terminal
z
Wear rubber gloves and protective clothes to keep acid off
skin. If acid gets in contact with skin, wash off immediately
with clean water.
z
z
Use a flashlight to check battery electrolyte level. ALWAYS
check the engine is stopped.
Positive
Terminal
DO NOT charge battery or jump-start engine when the
battery is frozen. Warm the battery to 15 degrees F or battery
may explode.
Figure 38. Battery Connection
z
Replace the battery with the same or similar capacity battery
or battery may explode.
PAGE 28 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — ENGINETROUBLESHOOTING
Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown,
please take a remedial action following the diagnosis based on the Engine and Roller Troubleshooting (Tables 8 and 9) information
shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our
company's business office or service plant.
TABLE 8. ENGINE TROUBLESHOOTING
SYMPTOM
POSSIBLE PROBLEM
Speed control lever is in "STOP" position?
No fuel reaching injection pump?
Defective fuel pump?
SOLUTION
Set speed control lever to "START" position.
Add fuel. Check entire fuel system.
Replace fuel pump.
Fuel filter clogged?
Replace fuel filter and clean tank.
Replace or repair fuel line.
Faulty fuel supply line?
Engine will not start or start is
delayed, although engine can be
turned over.
Check piston, cylinder and valves. Adjust or
repair per engine repair manual.
Compression too low?
Repair or replace injector in accordance with
engine repair manual.
Fuel injector not working correctly?
Oil pressure too low?
Check engine oil pressure.
Comply with cold starting instructions and
proper oil viscosity.
Low starting temperature limit exceeded?
Check whether clear (not turbid) fuel emerges
from the fuel line (detach from injection pump).
If the fuel is turbid or separated, warm up the
engine or drain the complete fuel supply
Fuel separates has inadequate resistance to
low temperatures?
At low temperatures engine will
not start.
system. Refuel with winter grade diesel fuel.
Refill engine crankcase with correct type of oil
for winter environment.
Engine oil too thick?
Throttle lever in STOP position?
Fuel filter blocked?
Reposition throttle lever to RUN position.
Replace fuel filter.
Engine fires but stops soon as
starter is switched off.
Fuel supply blocked?
Fuel tank empty?
Check the entire fuel system.
Add fuel.
Engine stops by itself during
normal operation.
Fuel filter blocked?
Replace fuel filter.
Fuel tank empty?
Replace fuel filter.
Fuel filter clogged?
Replace fuel filter.
Low engine power, output and
speed.
Fuel tank venting is inadequate?
Ensure that tank is adequately vented.
See engine manual for corrective action.
Speed control lever does not remain in
selected position?
Engine oil level too full?
Air filter blocked?
Correct engine oil level.
Clean or replace air filter.
Adjust valves per engine specification.
See engine manual.
Low engine power output and
low speed, black exhaust smoke.
Incorrect valve clearances?
Malfunction at injector?
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 29
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — ENGINETROUBLESHOOTING
Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown,
please take a remedial action following the diagnosis based on the EngineTroubleshooting (Table 8) information shown below and
on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business
office or service plant.
TABLE 8. ENGINE TROUBLESHOOTING (CONTINUED)
SYMPTOM
POSSIBLE PROBLEM
Fuel tank empty?
SOLUTION
Replace fuel filter.
Replace fuel filter.
Fuel filter clogged?
Low engine power, output and
speed.
Fuel tank venting is inadequate?
Ensure that tank is adequately vented.
See engine manual for corrective action.
Speed control lever does not remain in selected
position?
Engine oil level too full?
Air filter blocked?
Correct engine oil level?
Clean or replace air filter.
Adjust valves per engine specification.
See engine manual.
Low engine power output and
low speed, black exhaust smoke.
Incorrect valve clearances?
Malfunction at injector?
PAGE 30 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — ROLLERTROUBLESHOOTING
Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown,
please take a remedial action following the diagnosis based on the Roller Troubleshooting (Table 9) information shown below and
on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business
office or service plant.
TABLE 9. ROLLER TROUBLESHOOTING
SYMPTOM
POSSIBLE PROBLEM
Defective centrifugal clutch?
SOLUTION
Repair or replace clutch.
Damaged rubber coupling and flange?
Defective travel cable and link?
Replace rubber coupling and flange.
Repair or replacetravel cable and link.
Damaged scraper or too much mud in scraper? Replace or repair scraper.
Damaged or clogged oil filter?
Damaged or leaking hydraulic pipe?
Low oil level or contaminated oil?
Damaged or leaking hydraulic transmission?
Damaged or leaking hydraulic transmission?
Damaged drum gear and bearing?
Bad drum rotation?
Replace filter.
Unit does not travel or
travel is not smooth.
Repair or replace parts.
Replenish or replace oil.
Repair or replace hydraulic pump.
Repair or replace hydraulic motor.
Repair parts.
Repair or replace drum.
Repair or replace clutch.
Replace V-belt or adjust tension.
Defective centrifugal clutch?
Damaged or slipping V-belt?
Replace or repair vibration cable and
linkage.
Damaged vibration cable and linkage?
Unit does not vibrate or
has weak vibration.
Damaged vibration clutch?
Adjust or replace clutch.
Replace V-belt.
Defective clutch vibrator pulley V-belt?
Check and repair vibrator. Check if oil
level is not excessively high.
Vibrator does not turn smoothly with hand?
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 31
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLANATION OF CODE IN REMARKS COLUMN
How to read the marks and remarks used in this parts
book.
Items Found In the “Remarks” Column
The contents of this parts
catalog are subject to change
without notice.
Serial Numbers-Where indicated, this indicates a serial number
range (inclusive) where a particular part is used.
Model Number-Where indicated, this shows that the
corresponding part is utilized only with this specific model number
or model number variant.
Items Found In the “Items Number” Column
All parts with same symbol in the number column, , #,
<, belong to the same assembly or kit
+, %, or
*
If more than one of the same
reference number is listed, the
last one listed indicates newest
(or latest) part available.
PAGE 32 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED SPARE PARTS
MQ MIKASA MDR-9DYE VIBRATORY WALK-BEHIND
ROLLER W/YANMAR L100EE-DEVMK2 DIESEL ENGINE
1 to 3 Units
Qty.
P/N
Description
3 .......... 501010440 ........... OIL FILTER,TRANSMISSION
1 .......... 075080061 ........... CHAIN, DRIVE
6 .......... EM505834 ............ V-BELT
3 .......... 502303040 ........... THROTTLE WIRE
6 .......... 11465012590 ....... ELEMENT, AIR CLEANER
1 .......... 11465076631 ....... ROPE, STARTER
3 .......... 11425055100 ....... FILTER, FUEL SCREEN
6 .......... 11425055121 ....... FILTER, FUEL OIL
3 .......... 11425035110 ....... STRAINER, LUBE OIL ASSY.
3 .......... 10610077630 ....... KEY, IGNITION
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 33
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — DECAL PLACEMENT
DECAL PLACEMENT
PAGE 34 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — DECAL PLACEMENT
DECAL PLACEMENT
NO.
1
PART NO.
920200591
920200630
920201590
920101510
920203290
920200450
920101290
920201100
920200320
920200440
920200470
920101480
920101280
920101200
PART NAME
QTY. REMARKS
PLATE, CAUTION
PLATE, SERIAL NO.
DECAL, MQ MARK 98X70
1
1
1
2
3
4
DECAL, MIKASA MARK 440MM
DECAL, CAUTION
DECAL, OIL FILTER
DECAL, VIBRATION
DECAL, CLUTCH LEVER
DECAL, WATERTANK
DECAL, PROHIBIT TOW
DECAL, OIL TANK
DECAL, OIL LEVEL
DECAL, FORWARD & REVERSE
DECAL, GREASE
1
1
1
2
2
1
1
1
1
1
1
5
6
7
8
9
10
11
12
13
14
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 35
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — BODY ASSY.
BODY ASSY.
PAGE 36 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — BODY ASSY.
BODY ASSY.
NO.
1
2
3
4
5
6
8
9
10
42
43
44
45
46
48
49
51
52
53
54
55
56
57
58
59
60
68
69
82
83
PART NO.
PART NAME
QTY. REMARKS
502101270
502100720
502100710
502200960
001211430
030214350
930407021
020312100
030212300
502201150
502201160
502402930
502402940
001221025
030210250
501010150
502302511
001221030
030210250
502424050
001220825
030208200
952401560
031110160
502200990
001521225
502403940
001521020
020310080
030210250
BASE
1
1
1
2
8
8
4
8
8
1
1
1
1
6
6
4
2
8
8
2
6
6
6
8
1
18
2
4
4
4
SIDE PLATE, RIGHT
SIDE PLATE, LEFT
RUBBER PLATE
BOLT 14X30 H
LOCKWASHER M14
SHOCK ABSORBER MED
NUT M12
LOCKWASHER M12
SPRINKLING PIPE, FRONT
SPRINKLING PIPE, REAR
VINYL PIPE 10X13X280
VINYL PIPE 10X13X950
BOLT 10X25 T
LOCKWASHER M10
CAP 1/4
SCRAPER, END
BOLT 10X30 T
LOCKWASHER M10
SCRAPER/CENTER
BOLT 8X25 T
LOCK WASHER M8
WASHER 8.5X20X3
FLAT WASHER M10
BASE, SCRAPER
SOCKET HEAD BOLT 12X25 T
CHAIN COVER
SOCKET HEAD BOLT 10X20 T
NUT M10
LOCKWASHER M10
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 37
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — FRONT COVER ASSY.
FRONT COVER ASSY.
PAGE 38 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — FRONT COVER ASSY.
FRONT COVER ASSY.
NO.
PART NO.
PART NAME
QTY. REMARKS
13
14
16
17
18
20
21
22
23
24
25
26
27
28
31
32
33
34
35
36
37
38
39
41
031110160
502103800
001220820
030208200
952401560
502302490
001220815
030208200
031108160
502302500
001221020
030210250
021110160
001220825
502215470
001221020
030210250
031110160
001221015
030210250
031110160
502010650
407310670
954403241
FLAT WASHER M10
FRONT COVER
4
1
4
7
7
1
4
4
4
1
1
1
1
3
1
2
2
2
2
2
2
2
BOLT 8X20 T
LOCK WASHER M8
WASHER 8.5X20X3
CHECK COVER
BOLT 8X15 T
LOCK WASHER M8
FLAT WASHER M8
SUPPORT/COVER
BOLT 10X20 T
LOCKWASHER M10
FLAT WASHER M10
BOLT 8X25 T
BELT COVER (GX340)
BOLT 10X20 T
LOCKWASHER M10
FLAT WASHER M10
BOLT 10X15 T
LOCKWASHER M10
FLAT WASHER M10
ELBOW 90 DEG. 1/4
TANK CAP D108-120, RUBBER
COCK PT 1/4, BH-1211 (AL)
1
2
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 39
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — FRONT COVER ASSY. (CONTINUED)
FRONT COVER ASSY.
PAGE 40 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — FRONT COVER ASSY. (CONTINUED)
FRONT COVER ASSY.
NO.
PART NO.
PART NAME
QTY. REMARKS
65
001801050
020310080
001211030
020310080
030210250
920200591
920200630
920201590
920101510
920203290
920206450
920200450
920101290
920201100
920200320
920200440
959402990
091005020
020305040
030205130
031105080
025203020
959403251
502420150
001200820
030208200
031108160
BOLT 10X50 WHOLETHREAD
NUT M10
1
66
81
BOLT 10X30 H
4
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
1
2
2
2
82
NUT M10
83
LOCKWASHER M10
PLATE, CAUTION
PLATE, SERIAL NO.
DECAL, MQ MARK 98X70
DECAL, MIKASA MARK 440MM
DECAL, CAUTION
PLATE, MADE IN JAPAN
DECAL, OIL FILTER
DECAL, VIBRATION
DECAL, (CLUTCH LEVER)
DECAL, WATERTANK
DECAL, PROHIBIT TOW
ROPE
88
89
90
91
92
93
94
95
96
97
98
100
101
102
103
104
105
106
107
108
109
110
SCREW 5X20
NUT M5
LOCK WASHER M5
FLAT WASHER M5
SPLIT COTTER PIN 3X20
PLATE SPRING
SPACER
BOLT 8X20
LOCK WASHER M8
FLAT WASHER M8
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 41
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — AXLE ASSY.
AXLE ASSY.
PAGE 42 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — AXLE ASSY.
AXLE ASSY.
NO.
PART NO.
PART NAME
QTY. REMARKS
1
502101570
502202290
044006309
952400940
502302420
060406010
001521025
502200930
502302430
001521240
502200940
502200950
020130240
030230750
502302440
001521040
502303370
502338050
044006370
047910050
952401240
952406190
502302460
060305010
001520820
502402720
951400090
020118150
030218460
952400950
502305360
502303590
001521235
001521240
502402740
001210820
030208200
502403090
075080061
502402920
DRUM
2
2
2
ROLLER SHAFT
3
BEARING 6309VV
SPACER 45605
4
4
4
5
BEARING COVER
OIL SEAL TC-689012
SOCKET HEAD BOLT 10X25 T
BRACKET/L
2
6
4
7
12
2
8
9
SPACER
2
10
11
12
13
14
15
16
17
17
18
19
20
20
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
SOCKET HEAD BOLT 12X40 T
BRACKET/R FRONT
BRACKET/R REAR
NUT M30, P2.0
12
1
1
4
LOCK WASHER M30
GEAR 57
SOCKET HEAD BOLT 10X40 T
GEAR SHAFT
GEAR SHAFT
BEARING 6307VV
ROLLER BEARING NF307W
SPACER 35453
SPACER 35X45X3 S
COVER/GEAR SHAFT
OIL SEAL TB-55729
SOCKET HEAD BOLT 8X20 T
SPROCKET 15
KEY 10X8X33
NUT M18, P1.5
LOCK WASHER M18
WASHER 19456
BLOCK
CYLINDER BLOCK
SOCKET HEAD BOLT 12X35 T
SOCKET HEAD BOLT 12X40 T
BRACKET COVER
BOLT 8X20 H
4
2
12
2
2
2
2
2
2
2
2
8
2
2
2
2
2
2
2
30
30
2
12
12
2
1
1
LOCK WASHER M8
BEARING HOLDER
CHAIN RS80-61
TIGHTENER
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 43
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — AXLE ASSY. (CONTINUED)
AXLE ASSY.
PAGE 44 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — AXLE ASSY. (CONTINUED)
AXLE ASSY.
NO.
PART NO.
PART NAME
QTY. REMARKS
40
41
42
43
44
45
46
47
48
49
50
51
52
54
55
61
502302480
044006205
080100520
001210820
030208200
952400130
502402750
001521230
502402760
502402770
502402780
952401330
060604030
042006309
502408150
351010050
TIGHTENER PLATE (SHAFT)
BEARING 6205VV
1
2
1
1
1
1
1
3
2
2
2
2
2
4
4
2
STOP RING R-52
BOLT 8X20 H
LOCK WASHER M8
WASHER 9304
TIGHTENER PLATE HOLDER
SOCKET HEAD BOLT 12X30 T
FELT SEAL 6X8X1350
FELT SEAL 6X8X188
FELT SEAL 5X6X217
COLLAR 72803
OIL SEAL VC-45686
BEARING 6309ZZ
FELT RING BRACKET
GREASE FITTING A-MT6X1
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 45
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE —TRANSMISSION ASSY.
TRANSMISSION ASSY.
PAGE 46 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE —TRANSMISSION ASSY.
TRANSMISSION ASSY.
NO.
PART NO.
PART NAME
QTY. REMARKS
1
2
3
4
5
6
7
8
502010530
502010540
501010410
001520620
031106100
501010420
501010430
501010440
501010450
030210250
020310080
501010460
951400100
952400130
001210820
030208200
502303350
502010570
501010500
951400110
952400170
020118150
030218460
042006207
042006306
080200350
060303030
501010520
001220825
030208200
001211025
030210250
502302530
080100160
502010590
502321570
515447020
099208012
502402800
001521025
GEAR CASE
COVER, GEAR CASE
1
1
PACKING, GEAR CASE COVER
SOCKET HEAD BOLT 6X20 T
FLAT WASHER M6
SET BOLT, 87L-M12-M10/HST
TRANSMISSION 1515-522
OIL FILTER
PACKING/TRANSMISSION
LOCKWASHER M10
NUT M10
PINION 15
KEY 5X5X35
WASHER 9304
BOLT 8X20 H
LOCK WASHER M8
GEAR 80
DRIVE SHAFT
SPROKET 9
KEY 7X7X35
WASHER 19454
NUT M18, P1.5
LOCKWASHER M18
BEARING 6207ZZ
BEARING 6306ZZ
STOP RING S-35
OIL SEAL TB-30428
BEARING COVER
BOLT 8X25 T
LOCK WASHER M8
BOLT 10X25 H
LOCKWASHER M10
FLANGE FAN
STOP RING R-16
KEY 5X5X22/4DK
RUBBER COUPLING
COUPLING PIN
SOCKET HEAD SCREW 8X12 T
LEVER
1
6
6
4
1
1
1
4
4
1
1
1
1
1
1
1
1
2
2
2
2
1
1
1
1
1
4
4
4
4
1
1
1
1
6
2
1
1
9
11
12
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
36
37
38
39
40
41
63
64
SOCKET HEAD BOLT 10X25 T
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 47
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — HYDRAULIC OILTANK ASSY.
HYDRAULIC OIL TANK ASSY.
PAGE 48 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — HYDRAULIC OILTANK ASSY.
HYDRAULIC OIL TANK ASSY.
NO.
PART NO.
PART NAME
QTY. REMARKS
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
104
050200160
501010720
501010590
501010600
502302850
502302840
502201000
502010640
502010650
953405270
953405260
953405840
953400020
001221035
030210250
031110160
959010110
952401960
920200470
O-RING P-16
JOINT 3/4-16
JOINT 3/8
1
1
1
1
JOINT 1/4
OIL HOSE 3/8 320L
OIL HOSE 1/4 320L
OIL TANK
ELBOW 90 DEG. 3/8
ELBOW 90 DEG. 1/4
PLUG 1/4X14 13L
PACKING 1/4 (CU)
DRAIN PLUG M18 (H)
PACKING 19302
1
1
1
1
1
1
1
1
1
4
4
4
1
1
1
BOLT 10X35 T
LOCK WASHER M10
FLAT WASHER M10
LEVEL GAUGE/SP-1 W/P
COLLAR 11X30X16
DECAL, OIL TANK
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 49
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — CLUTCH BOX ASSY.
CLUTCH BOX ASSY.
PAGE 50 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — CLUTCH BOX ASSY.
CLUTCH BOX ASSY.
NO.
A
1
PART NO.
502910010
502302610
502302620
502302630
040006205
040006202
501010800
080200250
951400060
501010810
501010822
501010823
501010824
501010825
501010830
501010830
060102010
001520620
501010850
501010860
001520625
501010870
050200110
501301160
501010890
001520625
501010900
501010910
502302640
951400070
952400140
030212300
020312100
001221035
030210250
952401860
953400270
953405270
PART NAME
QTY. REMARKS
CLUTCH BOX ASSY. ................................... 1 ...... INCLUDES ITEMS W/
*
CLUTCH PULLEY/IN
CLUTCH SHAFT/IN
CLUTCH SHAFT/OUT
BEARING 6205
BEARING 6202
CLUTCH SL1.2-20/OS225
STOP RING S-25
1
1
1
5
1
1
1
1
3
AR
AR
AR
AR
1
2
2
8
1
2
2
1
2
1
1
4
1
1
1
2
2
2
2
4
4
4
2
2
3
*
*
4
5
*
*
6
7
*
*
8
9
KEY 5X5X58
*
COLLAR 25322/BEARING
SPACER 0.8T/CLUTCH
SPACER 1.0T/CLUTCH
SPACER 2.3T/CLUTCH
SPACER 3.2T/CLUTCH
CLUTCH CASE
PACKING/BEARING HOLDER
OIL SEAL SB-25388
SOCKET HEAD BOLT 6X20 T
SHIFTER FORK
*
10
*
10
*
10
*
10
*
11
*
13
*
14
*
15
*
16
*
17
FORK BLOCK
SOCKET HEAD BOLT 6X25 T
SHIFTER SHAFT
*
18
*
19
*
20
O-RING P-11
*
21
COVER, CLUTCH CASE
PACKING, CLUTCH CASE
SOCKET HEAD BOLT 6X25 T
PLUG 3/4
PACKING 3/4
CLUTCH PULLEY/OUT
KEY 7X7X26
WASHER 13304
LOCK WASHER M12
NUT M12
BOLT 10X35 T
LOCK WASHER M10
WASHER 112545
*
22
23
*
24
*
25
*
26
27
28
29
30
31
32
33
34
34
PLUG 1/4X14 10L
PLUG 1/4X14 13L
2
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 51
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — CLUTCH BOX ASSY. (CONTINUED)
CLUTCH BOX ASSY.
PAGE 52 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — CLUTCH BOX ASSY. (CONTINUED)
CLUTCH BOX ASSY.
NO.
PART NO.
953405260
502302650
959402980
001521025
501010950
502302660
501402260
501402400
501302160
042006204
952400930
080100470
952400130
001200820
030208200
001221035
030210250
031110160
501910040
PART NAME
QTY. REMARKS
35
PACKING 1/4 (CU)
2
1
1
1
1
1
4
1
1
2
1
1
1
1
1
2
2
2
*
36
*
CLUTCH LEVER
37
*
BALL GRIP 40D-M12
SOCKET HEAD BOLT 10X25 T
BEARING HOLDER
BEARING HOLDER/INPUT SIDE
SET BOLT, L50M10M12/CLUTCH
TIGHTENER PULLEY
TIGHTENER SUPPORT
BEARING 6204ZZ
COLLAR 20252
STOP RING R-47
WASHER 9304
BOLT 8X20
38
*
39
*
40
*
42
*
43$
44$
45$
46$
47$
48$
49$
50$
51$
52$
53$
54
LOCK WASHER M8
BOLT 10X35 T
LOCKWASHER M10
FLAT WASHER M10
BELT TIGHTENER ASSY. ............................ 1 ...... INCLUDES ITEMS W/$
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 53
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE —VIBRATION CASE ASSY.
VIBRATION CASE ASSY.
PAGE 54 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE —VIBRATION CASE ASSY.
VIBRATION CASE ASSY.
NO.
1
2
PART NO.
502302570
502201010
502201020
502302582
502302581
951400081
951400090
952400900
001211235
030212300
502302590
001521040
040006309
080101000
080200450
060106010
060206020
952400911
502100650
502302600
001521025
502201030
953400270
953405270
953405260
001520652
031106100
001221445
030214350
502403140
502010860
070100360
502402300
953405260
502303010
502303020
502305480
920101480
PART NAME
QTY. REMARKS
VIBRATING PULLEY
ROTARY SHAFT/L
ROTARY SHAFT/R
GEAR (DRIVE-1P)
GEAR 44 (DRIVEN-2P)
KEY 10X8X17
1
1
1
1
1
2
1
3
3
3
2
8
4
2
4
1
1
1
1
1
8
1
2
2
2
8
8
14
14
1
1
2
1
1
1
1
2
1
3
4-1
4-2
5
6
7
8
9
KEY 10X8X33
WASHER 13446
BOLT 12X35 H
LOCK WASHER M12
ECCENTRIC ROTATOR
SOCKET HEAD BOLT 10X40 T
BEARING 6309
STOP RING R-100
STOP RING S-45
OIL SEAL SB-659013
OIL SEAL SC-659013
SPACER 801003
VIBRATING CASE
CASE COVER
10
11
12
13
14
15
15
16
17
18
20
21
23
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
SOCKET HEAD BOLT 10X25 T
GEAR COVER
PLUG 1/4X14 10L
PLUG 1/4X14 13L
PACKING 1/4 (CU)
SOCKET HEAD BOLT 6X60 T
FLAT WASHER M6
BOLT 14X45 T
LOCK WASHER M14
T-JOINT
NIPPLE PT1/4
V-BELT A-36
BREATHER
PACKING 1/4 (CU)
PACKING, VIBRATION CASE/A
PACKING, VIBRATION CASE/B
ECCENTRIC ROTATOR
DECAL, OIL LEVEL
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 55
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — UPPER CONTROL HANDLE ASSY.
UPPER CONTROL HANDLE ASSY.
PAGE 56 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — UPPER CONTROL HANDLE ASSY.
UPPER CONTROL HANDLE ASSY.
NO.
PART NO.
PART NAME
QTY. REMARKS
1
502101480
501011090
501011100
959402980
001520620
030206150
031106100
501011110
501011120
505422750
001520615
501011140
501011150
001200835
020308060
031108160
501011162
502314420
501011180
501203980
001210615
001210620
501202200
501011220
001520652
001210615
031106100
501011310
050200160
020312100
030212300
031112230
502314410
001220615
BAR HANDLE, D.C./9D
TRAVELING LEVER
LINK
BALL GRIP 40D-M12
SOCKET HEAD BOLT 6X20 T
LOCK WASHER M6
FLAT WASHER M6
STEEL BALL
1
1
1
2
1
15
6
1
1
1
2
1
1
1
1
1
3
1
4
1
4
2
1
1
3
4
4
1
1
1
1
1
1
4
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
29
30
31
32
34
39
40
41
42
43
44
48
49
50
51
52
53
60
SPRING, 1.2X8X34
GUIDE
SOCKET HEAD BOLT 6X15 T
BUSH 8918, LINK
CONICAL SPRING WASHER
BOLT 8X35
NUT M8
FLAT WASHER M8
ROD END PR6-209
CABLE ASSY./C2110
CLAMP HC-40
HANDLE, D.C.
BOLT 6X15 H
BOLT 6X20 H
LEVER COVER, D.C.
LEVER GUIDE
SOCKET HEAD BOLT 6X60 T
BOLT 6X15 H
FLAT WASHER M6
VIBRATING LEVER
O-RING P-16
NUT M12
LOCK WASHER M12
FLAT WASHER M12
CABLE ASSY./C2550
BOLT 6X25 T
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 57
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — UPPER CONTROL HANDLE ASSY. (CONTINUED)
UPPER CONTROL HANDLE ASSY.
PAGE 58 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — UPPER CONTROL HANDLE ASSY. (CONTINUED)
UPPER CONTROL HANDLE ASSY.
NO.
PART NO.
PART NAME
QTY. REMARKS
61
025202020
502010930
502010940
920101290
920201100
920101280
501413650
501413660
020306050
022910090
501407790
501305190
502416960
001520815
501407810
501407820
501416950
099206008
501407840
031106100
025202012
501416970
001200830
501407880
020308060
501407890
031108160
001220815
502910020
SPLIT COTTER PIN 2X20
CLEVIS
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
62
63
CLEVIS PIN
93
DECAL, VIBRATION
DECAL, CLUTCH LEVER
DECAL / FORWARD & REVERSE
TURN BUCKLE
94
95
97
98
ADJUST BOLT
99
NUT M6
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
NUT M6 (L)
HANDLE PIN, D.C.
ROD, D.C.
ROD-GUIDE
SOCKET HEAD BOLT 8X15 T
ROD SPRING, D.C.
NUT, D.C.
LINK, D.C.
SOCKET HEAD SCREW 6X8 T
LINK PIN, D.C., 6X28-23
FLAT WASHER M6
SPLIT COTTER PIN 2X12
LEVER, D.C.
BOLT 8X30
GUIDE ROLLER, D.C.
NUT M8
LEVER SPRING, D.C.
FLAT WASHER M8
BOLT 8X15 T
HANDLE STOPPER
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 59
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — LOWER CONTROL HANDLE ASSY.
LOWER CONTROL HANDLE ASSY.
PAGE 60 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — LOWER CONTROL HANDLE ASSY.
LOWER CONTROL HANDLE ASSY.
NO.
2
3
4
5
6
7
8
9
PART NO.
501302670
501302680
501402860
001221245
020312100
030212300
031112230
501402870
501402880
020310080
959010413
020120160
501011162
502314420
501011180
001210615
502402900
001221020
030210250
001210620
0830000010
020306050
031106100
502402890
001220820
030208200
031108160
0012-20615
351010050
001220620
956300060
502303040
501310130
001220820
030208200
920101200
PART NAME
QTY. REMARKS
HANDLE BRACKET, RIGHT
HANDLE BRACKET, LEFT
BOLT 20X170
1
1
1
4
4
4
4
1
1
1
1
2
3
1
4
4
1
1
1
2
1
4
2
1
2
2
2
4
1
1
1
1
1
2
2
1
BOLT 12X45 T
NUT M12
LOCK WASHER M12
FLAT WASHER M12
HANDLE STOPPER
SPRING/HANDLE (1.4X18X44)
NUT M10
EYE NUT M10
NUT M20, P1.5
ROD END PR6-209
CABLE ASSY./C2110
CLAMP HC-40
BOLT 6X15 H
CABLE STOPPER
BOLT 10X20 T
LOCK WASHER M10
BOLT 6X20 H
COIL SPRING
10
11
12
28
29
30
31
34
36
37
38
39
45
46
47
56
57
58
59
60
64
76
87W
88W
89W
90W
91W
96
NUT M6
FLAT WASHER M6
CABLE STOPPER
BOLT 8X20 T
LOCK WASHER M8
FLAT WASHER M8
BOLT 6x15 T
GREASE FITTING A-MT6X1
BOLT 6X20 T
THROTTLE LEVER AY 22
THROTTLE WIRE S520-640
LEVER HOLDER
BOLT 8X20 T
LOCK WASHER M8
DECAL, GREASE
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 61
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — BATTERY ASSY.
BATTERY ASSY.
PAGE 62 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — BATTERY ASSY.
BATTERY ASSY.
NO.
70
71
72
73
74
75
76
77
78
79
80
PART NO.
502215490
001200815
030208200
502403310
502403320
020308060
030208200
031108160
607010030
502301040
502301050
PART NAME
BATTERY BASE
BOLT 8X15
QTY. REMARKS
1
4
4
1
2
4
2
2
1
1
1
SW M8
BATTERY PROTECT
BOLT/BATTERY
NUT M8
WASHER, LOCK M8
WASHER, FLAT M8
BATTERY 12N24-3.26A19L
BATTERY CORD (+) 220
BATTERY CORD (-) 380
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 63
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — IGNITION SWITCH/MOUNTING PLATE ASSY.
IGNITION SWITCH AND MOUNTING PLATE ASSY.
PAGE 64 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
MDR-9DYE — IGNITION SWITCH/MOUNTING PLATE ASSY.
IGNITION SWITCH AND MOUNTING PLATE ASSY.
NO.
1
2
PART NO.
34578
11435177500
10610077630
PART NAME
QTY. REMARKS
SWITCH HOLDER
SWITCH, IGNITION
KEY, IGNITION
1
1
1
3
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 65
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE DEVMK2 — CYLINDER BLOCK ASSY.
CYLINDER BLOCK ASSY.
PAGE 66 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE DEVMK2 — CYLINDER BLOCK ASSY.
CYLINDER BLOCK ASSY.
NO
PART NO
PART NAME
QTY.
REMARKS
1
71497001560
11435001700
26106100122
10502501220
11465001230
11465001240
11465001250
11465001260
11465101330
11425001800
11465001380
11427001600
26226060182
26226060222
26366060002
11465001412
11466001471
11465002100
11425035150
26106080352
10542501690
11469901760
11429901950
22190160002
11429902030
11465002150
11425001830
11425001841
24162152112
24423355008
22423355008
26106080122
11465002200
11465002210
22312040080
11498401940
23000019000
16011001870
12125239450
11498508350
11435239400
22190160002
BLOCK ASSY. CYLINDER ........................... 1 ................... INCLUDES ITEMS W/
*
6
*
7
*
8
COVER, STARTER
BOLT M10X 12 PLATED
NUT 10
1
2
2
2
2
2
4
1
1
1
2
1
2
3
1
9
STUD, CYLINDER HEAD
STUD, CYLINDER HEAD
NUT 10
10
11
12
13
19
25
26
27
28
29
30
31
34+
36
37
38
39
41#
42
43
44
45
46
47
48
49
50
51
52
53
54
55
58
59
60
61
62
WASHER
GASKET, CYLINDER HEAD CMP
SHIM SET
O-RING
PARALLEL PIN 8 X 12
STUD M 6 X 18 PLATED
STUD M 6 X 22 PLATED
NUT M 6
GASKET CRANKCASE
COVER D, CRANKCASE ............................. 1 ................... INCLUDES ITEMS W/+
BEARING, MAIN
PIPE, L.O. INLET
BOLT M 8 X 35 PLATED
PLUG M16
1
1
16
2
CAP, W/LUB.OIL GAUGE............................. 1 ................... INCLUDES ITEMS W/#
O-RING
SEAL WASHER 16S
RETAINER
BALL BEARING
COVER, INSPEC.WINDOW
GASKET
NEEDLE BEARING
SEAL, OIL
SEAL, OIL
1
2
1
1
1
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1
BOLT M 8 X 12 PLATED
MAIN BEARING US = 0.25
MAIN BEARING US = 0.50
PIN 4 X 8 STRAIGHT
PIPE
CLAMP 19
PLUG, RUBBERW/SCREW
SENDER, OIL PRESSURE
NIPPLE, DRAIN
JOINT, DRAIN
SEAL WASHER 16S
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 67
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE DEVMK2 — CYLINDER HEAD AND COVER ASSY.
CYLINDER HEAD AND BONNET ASSY.
PAGE 68 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE DEVMK2— CYLINDER HEAD AND COVER ASSY.
CYLINDER HEAD AND COVER ASSY.
NO
1
PART NO
PART NAME
QTY.
REMARKS
11465111020
11465111100
11465111110
11465011121
11962011180
11465111250
11465111260
11465111650
11425011240
26856060002
11465111660
11425011240
26856060002
22242000150
11465011340
10421111370
11477111461
11477111470
11465011600
27310070000
26106060702
11425011901
22351040008
26106080552
26226060552
26366060002
11465111310
11465111950
11425003591
11425003640
22312030160
CYLINDER HEAD
VALVE, SUCTION
VALVE, EXHAUST
SPRING, VALVE
RETAINER, SPRING
1
1
1
2
2
6
7
8
9
10
11
SUPPORT CMP, ARM .............................. 1 ................. INCLUDES ITEMS W/
*
SUPPORT, ROCKER ARM
ARM ASSY. INTAKE
SCREW, VALVE ADJUST
LOCK NUT 6
ARM ASSY., EXHAUST
SCREW, VALVE ADJUST
LOCK NUT 6
CIRCLIP 15
SEAL, VALVE STEM
CAP, VALVE
GASKET, NOZZLE
SPACER, NOZZLE
WASHER
1
1
1
1
1
*
12
14
15
16
*
*
*
*
18+
19+
1 ................. INCLUDES ITEMS W/+
1
2
2
2
1
1
2
4
3
1
1
2
2
2
1
20
*
21
22
23
24
25
26
27
28
29
30
31
32
33
34
36#
39#
41#
COTTER 7
BOLT M 6 X 70 PLATED
RETAINER
SPRING PIN 4 X 8
BOLT M 8 X 55 PLATED
STUD M 6 X 55 PLATED
NUT M 6
GASKET, BONNET
COVER ASSY. HEAD................................ 1 ................. INCLUDES ITEMS W/#
SHAFT ASSY., DECOMP.
SPRING
PARALLEL PIN 3 X 16
1
1
1
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 69
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2— MUFFLER ASSY.
MUFFLER ASSY.
PAGE 70 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2— MUFFLER ASSY.
MUFFLER ASSY.
NO
17
24
25
PART NO
PART NAME
QTY.
REMARKS
11465013201
11497013551
16026001580
11497013561
11497013700
11497013710
26106080182
26216080182
26366080002
10519813621
10509813990
11498513701
10509813990
26113060082
GASKET, NON-ASB.
1
MUFFLER ASSY. ...................................... 1 ................. INCLUDES ITEMS W/
BOLT M 6 X 6
MUFFLER
*
10
1
*
26
27
28
30
31
32
37
*
*
*
*
COVER A, MUFFLER
COVER, MUFFLER
BOLT, M 8 X 16 PLATED
STUD, M 8 X 18 PLATED
NUT, M 8
1
2
2
2
2
EXTENTION, SILENCER.......................... 1 ................. INCLUDES ITEM W/#
40#
41
BOLT
1
PIPE, SILENCER...................................... 1 ................. INCLUDES ITEMS W/+
42+
43+
BOLT
BOLT, M 6 X8
1
2
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 71
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2— AIR CLEANER ASSY.
AIR CLEANER ASSY.
PAGE 72 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2— AIR CLEANER ASSY.
AIR CLEANER ASSY.
NO
1
PART NO
PART NAME
QTY.
REMARKS
11465012211
71465012560
11465012520
11465012530
11425212560
11465012590
11425212550
11425012300
11469912020
11465012301
26106060252
26226060142
26226060752
GASKET, AIR CLEANER
1
2
CLEANER ASSY. AIR ............................... 1 ................. INCLUDES ITEMS W/
*
4
COVER, AIR CLEANER
CASE, AIR CLEANER
WASHER M 8, SEAL
ELEMENT W/PRE-FILTER
WING, NUT M 8
1
1
1
1
1
3
1
1
3
1
2
*
5
*
6
*
7
*
10
*
11
12
13
14
15
16
U- NUT
PIPE, AIR INTAKE
GASKET, AIR INTAKE
BOLT M 6 X 25 PLATED
STUD M 6 X 14 PLATED
STUD M 6 X 75
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 73
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR — CRANKSHAFT, PISTON AND CAMSHAFT ASSY.
CRANKSHAFT, PISTON AND CAMSHAFT ASSY.
PAGE 74 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR — CRANKSHAFT, PISTON AND CAMSHAFT ASSY.
CRANKSHAFT, PISTON AND CAMSHAFT ASSY.
NO
1
PART NO
PART NAME
QTY.
REMARKS
71466014100
11465014200
11477114260
11465014401
71465421730
12271001220
11465021551
11466221593
11466221601
22512050140
71465222720
71497022500
11469922300
12979222400
71465023100
12406023100
10530023200
71465023600
71497028100
24101062034
16031014550
22512070360
26106080202
71465023610
11465002100
71465023620
11465002150
24101063034
24162152112
CAMSHAFT ASSY., D
TAPPET
1
2
1
2
1
1
1
6
7
8
TAPPET, F.O.
ROD, PUSH
12
20
21
22
25 #
26
27
CRANKSHAFT ASSY.
NUT, M18
WASHER, FLYWHEEL
FLYWHEEL, DEJ., W/GEAR ..................... 1 ................. INCLUDES ITEMS W/ #
GEAR, RING
KEY, 5 X 14
1
1
PISTON, W/RINGS ................................... 1 ................. INCLUDES ITEMS W/
*
29
RING SET, PISTON
PIN, PISTON D=23
CIRCLIP 23
1
1
2
*
35
36
37
ROD ASSY., CONNECTING ..................... 1 ................. INCLUDES ITEMS W/%
BUSH, PISTON PIN
BOLT, ROD
BEARING, CRANKPIN
SHAFT ASSY., BALANCER
BALL BEARING
WASHER
KEY 7 X 36
BOLT M 8 X 20 PLATED
BEARING, CRANKPIN U.S=0.25
BEARING, MAIN
BEARING, CRANKPIN U.S=0.50
BALL BEARING
BALL BEARING
NEEDLE BEARING
40%
41%
42%
44
1
2
1
1
1
1
1
1
1
1
1
1
1
1
49
50
51
52
53
54
55
56
57
58
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 75
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2— LUB. OIL PUMP AND GOVERNOR ASSY.
LUB. OIL PUMP AND GOVERNOR ASSY.
PAGE 76 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2— LUB. OIL PUMP AND GOVERNOR ASSY.
LUB. OIL PUMP AND GOVERNOR ASSY.
NO
1
PART NO
PART NAME
QTY.
REMARKS
11465032010
11425032070
10333832570
22312030160
26476060142
11425035110
11425035070
24341000224
26106060162
71468561700
11477061520
11477061600
11477061610
22137080000
11497066010
11425066200
26776100002
13521061090
22451060000
11425066550
71468561500
11425035110
22322030200
11425266051
18336066110
11425266252
11425066440
10522566990
26106060202
26476060142
26757060002
11477161800
11477161820
11477161900
11477161930
24311000125
PUMP ASSY. LUB. OIL
COVER, LUB. OIL PUMP
O-RING
1
1
1
1
3
6
7
8
PARALLEL PIN 3 X 16
BOLT, M 6 X14, TAPPING
STRAINER, LUB. OIL ASSY. .................. 1.................... INCLUDES ITEMS W/
STRAINER, LUB. OIL
O-RING 1A S-22.4
BOLT M 6 X 16 PLATED
GOVERNOR ASSY.
BEARING, NEEDLE
SEAL, OIL
9
10
11
*
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
*
12
13
21
27
28
29
30
32
33
39
40
41
42
47
10
*
WASHER,THRUST
WASHER 8, POLISHED
SPRING, REGULATOR
SPRING, RETURN
LOCK NUT M10 PLATED
LEAD
WIRE 0.6
TORQUE SPRING ASSY.
LEVER ASSY., GOVERNOR
STRAINER, LUB. OIL ASSY. .................. 1.................... INCLUDES ITEMS W/+
55+
56
58
59
60
61
62
63
64
66
67
68
69
70
TAPER PIN 3 X 20
HANDLE, REGULATOR
BRACKET, REGULATOR
SPRING, RETURN
BOLT, ADJUSTING
SCREW
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BOLT M 6 X 20 PLATED
BOLT M 6 X 14 TAPPING
NUT 6
WASHER
PLATE
PROCTECTOR
NUT
O-RING 1A P-12.5
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 77
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2 — COOLING AND STARTING DEVICE ASSY.
COOLING AND STARTING DEVICE ASSY.
PAGE 78 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2 — COOLING AND STARTING DEVICE ASSY.
COOLING AND STARTING DEVICE ASSY.
NO
1
PART NO
PART NAME
QTY.
REMARKS
11465045201
11435045320
11435045340
18372055210
26106060202
11466845102
11425045301
11425045310
11465045330
11437045351
11466076052
11466076251
COVER
1
1
1
1
1
1
4
4
1
4
2
RUBBER, SEAL
COLLAR
GROMMET
BOLT M 6 X 20 PLATED
CASE, FAN SILVER 17
RUBBER, CUSHION
COLLAR
SEAL, FAN CASE
BOLT, FAN CASE
3
4
5
6
7
8
9
10
11
12
RECOIL STARTER D ASSY................... 1.................... INCLUDES ITEMS W/
*
RECOIL ASSY. ....................................... 1.................... INCLUDES ITEMS W/$
*
13 $ 11488076520
REEL, RECOIL
1
1
2
1
1
1
2
1
1
1
1
4
3
1
*
14 $ 11466076531
CASE D, W/NO LABEL
RATCHET
*
15 $ 11487076530
*
16 $ 11487076540
SPRING, SPRIAL
*
17 $ 11487076550
GUIDE, RATCHET
SPRING, FRICTION
SPRING, RETURN
SET SCREW
*
18 $ 11487076560
*
19 $ 11487076570
*
20 $ 11487076580
*
22 $ 11487076620
KNOB, STARTER
*
*
23 $ 11465076631
ROPE, RECOIL STARTER
PULLEY, STARTER
BOLT M 6 X 8 PLATED
BOLT M 6 X 12 PLATED
FLYWHEEL, DEJ. W/ GEAR
*
24
25
26
27
11466076592
26106060082
26106060122
11466221593
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 79
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2— FUEL INJECTION PUMP ASSY.
FUEL INJECTION PUMP ASSY.
PAGE 80 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2— FUEL INJECTION PUMP ASSY.
FUEL INJECTION PUMP ASSY.
NO
PART NO
PART NAME
QTY.
REMARKS
2
71465651110
10554651020
11425051080
11497051100
11425051160
11465051300
10554651330
11425051340
12455051350
11425051600
11425051640
11425051650
22351020006
22351030008
11477111470
71487553101
11477111461
11487153000
11959353080
11425053120
11959353130
11477553140
11477553210
11487553100
PUMP ASSY., FUEL INJECTORS .......... 1.................... INCLUDES ITEMS W/
*
3
GASKET
PLATE
BODY, F.I. PUMP
SPRING
VALVE ASSY., DELIVERY
SPRING, DELIVERY VALVE
HOLDER, F. I. P. DELIVERY
GASKET, DELIVERY
LEVER ASSY., CONTROL
SEAT A, SPRING
SEAT B, SPRING
SPRING PIN 2 X 6
SPRING PIN 3 X 8
SPACER, NOZZLE
1
1
1
1
1
1
1
2
1
1
1
2
2
1
*
4
*
5
*
10
*
11
14
15
16
17
18
19
20
21
22
23
24
*
*
*
*
*
*
*
*
*
VALVE ASSY., F. INJECT ....................... 1.................... INCLUDES ITEMS W/+
GASKET, NOZZLE
NOZZLE, ASSY.
NUT, NOZZLE CASE
SPRING, NOZZLE
RETAINER
1
1
1
1
1
1
2
25+
26+
27+
28+
29+
30+
31+
SPACER, VALVE STOP
PIN
HOLDER ASSY. ...................................... 1.................... INCLUDES ITEMS W/%
PIN, SPRING
SHIM PACK
SHIM SET
34+% 11425053331
1
1
1
35+
36
11425053400
11425001800
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 81
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2 — FUELTANK AND FUEL PIPE ASSY.
FUEL TANK AND FUEL PIPE ASSY.
PAGE 82 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2 — FUELTANK AND FUEL PIPE ASSY.
FUEL TANK AND FUEL PIPE ASSY.
NO
PART NO
PART NAME
QTY.
REMARKS
1
71465055130
11428855041
11428855081
11425055100
11465055150
10385455220
23414080000
10530055080
11425055201
11425055121
11425055130
11429955210
11469955230
11425055300
24341000150
11465159802
11456055810
11465059850
22117080000
26106080452
26366060002
26476060142
10699044660
11426859061
11465259300
12472259050
11465059060
11465259310
12175059890
71465651110
71465653101
TANK ASSY., FUEL ................................1.................... INCLUDES ITEMS W/
*
3
CAP ASSY., FUEL TANK ........................1.................... INCLUDES ITEMS W/+
*
5 +
*
VALVE
1
1
1
2
1
1
4
6
FILTER, FUEL
PIPE, GAUGE
CLAMP
*
7
8
9
GASKET 8, ROUND
PLUG, DRAIN
DAMPER, FUEL TANK
*
10
*
11
12
*
FILTER, FUEL OIL ..................................1.................... INCLUDES ITEMS W/#
13#
GASKET
1
1
1
14
15
16
17%
18
19
20
21
22
23
24
25
26
27
STAY
STAY B, FUEL TANK
COCK ASSY., FUEL ...............................1.................... INCLUDES ITEMS W/%
O-RING 1A S-15.0
PIPE, FUEL INJECTION
BOLT, LIFTING
1
1
1
1
1
1
2
2
2
1
BRACKET, PIPE
WASHER 8
BOLT M 8 X 45 PLATED
NUT M 6
BOLT M 6 X 14 TAPPING
CLIP, HOSE
PIPE, FUEL OIL
PIPE, FUEL RETURN .............................1.................... INCLUDES ITEMS W/
<
28
29
30
31
32
33
<
<
<
<
CLAMP 9
2
1
1
1
1
1
PIPE, FUEL RETURN
TUBE, PROTECT
CLAMP 140
PUMP ASSY., FUEL INJECTION
VALVE ASSY., FUEL INJECTION
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 83
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2 — STARTING MOTOR AND DYNAMO ASSY.
STARTING MOTOR AND DYNAMO ASSY.
PAGE 84 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2 — STARTING MOTOR AND DYNAMO ASSY.
STARTING MOTOR AND DYNAMO ASSY.
NO
PART NO
PART NAME
QTY.
REMARKS
1
11436277011
11438177110
X2114811000
X2114715500
11438177130
11438177140
11437177160
11437179040
11437179050
STARTER, S114-651A ............................1.................... INCLUDES ITEMS W/
*
2
ARMATURE
1
1
1
1
1
*
3
WASHER KIT, THRUST
STOPPER SET, PINION
COIL ASSY., FIELD
COVER, REAR
*
4
*
5
*
6
*
7
HOLDER ASSY., BRUSH ........................1.................... INCLUDES ITEMS W/ +
*
8 +
*
BRUSH, -
BRUSH, +
SPRING, BRUSH
PINION ASSY.
1
1
4
1
1
1
1
1
2
2
1
2
1
1
3
3
1
2
2
1
9 +
*
10 + 11437179060
*
11
12
13
14
15
16
17
18
19
23
24
25
26
30
31
32
33
34
X211485016
11438177151
11437177170
11437177180
12429877020
12419577770
11437179070
X2114274200
26106100302
16071078710
26106060122
26106060202
26577060142
11438577400
26106060122
26106060202
11435177210
11435177640
29411200000
10519878570
11498578560
11435178261
11435178771
11435178781
26716080002
*
*
*
*
*
*
*
HOUSING ASSY. GEAR
COVER KIT, DUST
SHIFT LEVER KIT
SWITCH, MAGNET
BOLT, THROUGH
BOLT M 6 X 37
COVER, TERMINAL
BOLT M 10 X 30 PLATED
CLAMP, CORD
BOLT M 6 X 12 PLATED
BOLT M 6 X 20 PLATED
SCREW M 6 X 14
BRACKET
BOLT M 6 X 12 PLATED
BOLT M 6 X 20 PLATED
REGULATOR
FUSE ASSY. ...........................................1.................... INCLUDES ITEMS W/%
35%
36
FUSE 20A, CARTRIDGE
HARNESS C, WIRE
HARNESS, WIRE
1
1
1
37
38
DYNAMO ASSY. .....................................1.................... INCLUDES ITEMS W/ #
39 #
40 #
41
STATOR ASSY., 132.1MM
WHEEL, STATOR, 132.1MM
NUT M 8
1
1
1
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 85
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2 — TOOL LABEL AND GASKET SET ASSY.
TOOL LABEL AND GASKET SET ASSY.
PAGE 86 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
YANMAR L100EE-DEVMK2 — TOOL LABEL AND GASKET SET ASSY.
TOOL LABEL AND GASKET SET ASSY.
NO
PART NO
PART NAME
QTY.
REMARKS
4
11425007090
11425007111
11426807240
11426107350
71465192620
11465101330
11465001380
11465001412
11429901950
11425001841
22190160002
11465011340
11477111461
11465111310
11465012301
11465012211
11465013201
10333832570
24341000224
24311000125
23414080000
LABEL, AIR COOLED
LABEL, YANMAR
LABEL, CAUTION
LABEL
1
1
1
1
5
6
7
26
27
GASKET SET ......................................... 1.................... INCLUDES ITEMS W/
*
GASKET, CYLINDER HEAD CMP.
O-RING
1
1
1
1
1
4
2
1
1
1
1
2
1
1
1
1
*
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
GASKET, CRANKCASE
O-RING
GASKET
SEAL WASHER 16S
SEAL, VALVE STEM
GASKET, NOZZLE
GASKET, BONNET
GASKET, AIR INTAKE
GASKET, AIR CLEANER
GASKET, NON-ASB
O-RING
O-RING 1A S-22.4
O-RING 1A P-12.5
GASKET 8, ROUND
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 87
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective: October 1, 2002
TERMS AND CONDITIONS OF SALE — PARTS
PAYMENT TERMS
5. Partsmustbeinnewandresalablecon- Multiquipreservestherighttoquoteandsell
dition,intheoriginalMultiquippackage(if directtoGovernmentagencies,andtoOriginal
any), and with Multiquip part numbers Equipment Manufacturer accounts who use
Terms of payment for parts are net 10 days.
FREIGHTPOLICY
clearlymarked.
our products as integral parts of their own
products.
All parts orders will be shipped collect or
prepaidwiththechargesaddedtotheinvoice.
All shipments are F.O.B. point of origin.
Multiquip’sresponsibilityceaseswhenasigned
manifesthasbeenobtainedfromthecarrier,
andanyclaimforshortageordamagemustbe
settledbetweentheconsigneeandthecarrier.
6. Thefollowingitemsarenotreturnable:
SPECIALEXPEDITINGSERVICE
a. Obsolete parts. (If an item is in the
price book and shows as being re- A$35.00surchargewillbeaddedtotheinvoice
placedbyanotheritem,itisobsolete.) forspecialhandlingincludingbusshipments,
insuredparcelpostorincaseswhereMultiquip
mustpersonallydeliverthepartstothecarrier.
(such as gaskets, seals, “O” rings,
b. Any parts with a limited shelf life
andotherrubberparts)thatwerepur- LIMITATIONSOFSELLER’SLIABILITY
MINIMUMORDER
chasedmorethansixmonthspriorto
thereturndate.
Multiquip shall not be liable hereunder for
damagesinexcessofthepurchasepriceofthe
The minimum charge for orders from Mul-
tiquipis$15.00net.Customerswillbeasked
for instructions regarding handling of orders
notmeetingthisrequirement.
c. Anylineitemwithanextendeddealer item with respect to which damages are
netpriceoflessthan$5.00.
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
otherspecial,consequentialorincidentaldam-
ages.
d. Special order items.
RETURNEDGOODSPOLICY
e. Electricalcomponents.
f. Paint,chemicals,andlubricants.
g. Decalsandpaperproducts.
h. Itemspurchasedinkits.
Returnshipmentswillbeacceptedandcredit
willbeallowed,subjecttothefollowingprovi-
sions:
LIMITATIONOFWARRANTIES
Nowarranties,expressorimplied,aremade
in connection with the sale of parts or trade
accessoriesnorastoanyenginenotmanufac-
tured by Multiquip. Such warranties made in
connectionwiththesaleofnew,completeunits
are made exclusively by a statement of war-
rantypackagedwithsuchunits,andMultiquip
neitherassumesnorauthorizesanypersonto
assume for it any other obligation or liability
whatever in connection with the sale of its
products.Apartfromsuchwrittenstatementof
warranty, there are no warranties, express,
impliedorstatutory,whichextendbeyondthe
descriptionoftheproductsonthefacehereof.
1. AReturnedMaterialAuthorizationmust
be approved by Multiquip prior to ship-
ment.
7. Thesenderwillbenotifiedofanymaterial
receivedthatisnotacceptable.
2. ToobtainaReturnMaterialAuthorization,
alistmustbeprovidedtoMultiquipParts
Salesthatdefinesitemnumbers,quanti-
ties, and descriptions of the items to be
returned.
8. Suchmaterialwillbeheldforfiveworking
days from notification, pending instruc-
tions.Ifareplyisnotreceivedwithinfive
days,thematerialwillbereturnedtothe
senderathisexpense.
a. Thepartsnumbersanddescriptions
must match the current parts price
list.
9. Creditonreturnedpartswillbeissuedat
dealer net price at time of the original
purchase,lessa15%restockingcharge.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
basedonthelistpricethatwaseffective
twelvemonthspriortotheRMAdate.
c. The list must state the reason(s) for
thereturn.
d. The list must reference the sales
order(s)orinvoice(s)underwhichthe
itemswereoriginallypurchased.
11. Credit issued will be applied to future
purchasesonly.
e. The list must include the name and
phonenumberofthepersonrequest-
ingtheRMA.
PRICINGANDREBATES
Prices are subject to change without prior
notice.Pricechangesareeffectiveonaspe-
cificdateandallordersreceivedonorafterthat
datewillbebilledattherevisedprice.Rebates
3. AcopyoftheReturnMaterialAuthoriza-
tionmustaccompanythereturnshipment.
4. Freight is at the sender’s expense. All forpricedeclinesandaddedchargesforprice
partsmustbereturnedfreightprepaidto increaseswillnotbemadeforstockonhand
Multiquip’sdesignatedreceivingpoint.
atthetimeofanypricechange.
PAGE 88 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE PAGE
MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 89
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION AND PARTS MANUAL
HERE'S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
MULTIQUIP’SMAINPHONENUMBERS
800-421-1244
310-537-3700
FAX: 310-537-3927
PARTSDEPARTMENT
800-427-1244
310-537-3700
FAX: 800-672-7877
FAX: 310-637-3284
MAYCOPARTS
800-306-2926
310-537-3700
FAX: 800-672-7877
FAX: 310-637-3284
SERVICEDEPARTMENT
800-478-1244
310-537-3700
FAX: 310-537-4259
MQPOWERSERVICEDEPARTMENT
800-835-2551
310-537-3700
FAX: 310-638-8046
TECHNICALASSISTANCE
800-478-1244
FAX: 310-631-5032
WARRANTYDEPARTMENT
800-421-1244, EXT. 279 FAX: 310-537-1173
310-537-3700, EXT. 279
MULTIQUIP INC.
POST OFFICE BOX 6254
CARSON, CA 90749
310-537-3700 • 800-421-1244
FAX:310-537-3927
WWW:multiquip.com
Atlanta • Boise • Dallas • Houston • Newark
Quebec, Canada • Manchester, UK • Rio De Janiero, BR • Guadalajara, MX
manufactured for Multiquip Inc.
by
MIKASA SANGYO CO., LTD. Tokyo, Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|