(Troubleshooting Continued)
Troubleshooting Cherry Tree Controller:
Hi Ho Cherry O
Problem: The Cherry Tree Controller does not activate by pressing on the
plates or your switch
.
Action #1: Make sure that the connection between the controller and your
switches (if applicable) are tight. There should be no gaps. This is a common
error and an easy fix.
Action # 2 Make sure the batteries are in the battery compartment properly, and
making good contact. Replace if weak or dead.
Catalog # 941
Action 3: Try a different switch with the controller (if applicable) to rule out
this as the source of the problem.
Action #4: Check that no debris or small objects are blocking or obstruction
either of the two switch plates.
Additional Board for Hi Ho Cherry O
Care of Unit:
The Spinner and Cherry Tree Controller can be wiped clean with any
household multi-purpose cleaner and disinfectant.
Do not submerge the unit, as it will damage the contents and the electrical
components.
# 941-A
Do not use abrasive cleaners, as they will scratch the surface of the unit
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-TEC-TOYS or 1-800-832-8697
User’s Guide
Hi Ho Cherry O is a registered trademark of the Milton Bradley Corporation. © 2005
Enabling Devices & Toys for Special Children
385 Warburton Avenue
Hastings-on-Hudson, NY 10706
Enabling Devices & Toys for Special Children
Telephone 914-478-0960 - Fax 914-478-7030
Hastings-on-Hudson, NY 10706
Download from Www.Somanuals.com. All Manuals Search And Download.
|