Miele Refrigerator 09 170 080 User Manual

Operating and Installation  
Instructions  
Wine Storage Unit  
KWT 1601 Vi  
KWT 1611 Vi  
en - US, CA  
To prevent accidents  
and appliance damage  
read these instructions  
before  
installation or use.  
M.-Nr. 09 170 080  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Installation options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Adjusting the door opening angle (optional accessory) . . . . . . . . . . . . . . . . . . . . 38  
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
RemoteVision module installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Home Security System (HSS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Preparing the installation niche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Sliding the appliance into the installation niche . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Aligning the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Attaching the appliance to the installation niche. . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Preparing the custom door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Attaching and aligning the custom door front . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
RemoteVision (optional accessory) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Accessing the RemoteVision control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
When using the appliance, follow  
basic safety precautions, including  
the following:  
Electrical safety  
Before installation, make sure that  
~
the voltage and frequency listed on the  
data plate correspond with the  
Read all instructions before  
installation and use to prevent  
accidents and machine damage.  
household electrical supply. This data  
must correspond to prevent injury and  
machine damage. Consult a qualified  
electrician if in doubt.  
Before installation or service,  
~
This appliance is intended for  
disconnect the power supply to the  
work area by unplugging the unit,  
"tripping" the circuit breaker or  
removing the fuse.  
residential use only. Use only as  
described in this Operating manual.  
Only use the appliance for its  
intended purpose.  
Do not use an extension cord to  
~
connect this appliance to electricity.  
Extension cords do not guarantee the  
required safety of the appliance  
(e.g., danger of overheating).  
This appliance complies with current  
safety requirements. Improper use  
of the appliance can lead to  
personal injury and material  
damage.  
Be certain your appliance is  
~
properly installed and grounded by a  
qualified technician. To guarantee the  
electrical safety of this appliance  
continuity must exist between the  
appliance and an effective grounding  
system. It is imperative that this basic  
safety requirement be met. If there is  
any doubt, have the electrical system of  
the house checked by a qualified  
electrician.  
Keep these operating instructions in  
a safe place and pass them on to  
any future user.  
Warning: At an altitude of more than  
8200 ft (2500 m) the glass door can  
break. Danger of injuries.  
Only connect power to the  
~
appliance when all installation work is  
complete.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Installation  
Use  
This appliance is not designed for  
~
This appliance is top-heavy and  
must be secured to prevent the  
possibility of tipping forward.  
Keep the door closed until the  
appliance is completely installed  
and secured per installation  
instructions.  
commercial use. It is intended for use in  
domestic households and in similar  
working and residential environments  
such as:  
– shops, offices and similar work  
environments  
– by customers in hotels, motels, Bed  
& Breakfasts or similar residential  
environments.  
This appliance must be installed  
~
and connected in compliance with the  
installation instructions.  
This appliance is not intended for  
~
outdoor use.  
Installation and repair work should  
~
be performed by a Miele authorized  
service technician. Work by unqualified  
persons could be dangerous and may  
void the warranty.  
Persons who lack physical, sensory  
~
or mental abilities, or experience with  
the machine should not use it without  
supervision or instruction by a  
responsible person.  
Do not operate any appliance with a  
~
damaged cord or plug, or if the  
appliance has been damaged in any  
To reduce the risk of injury, do not  
~
manner. Contact Miele’s Technical Ser- allow children to play in, on or near the  
vice Department.  
appliance, especially in the door hinge  
area.  
This appliance must not be used in  
~
a non-stationary location (e.g. on a  
Do not store or use gasoline or other  
~
flammable vapors and liquids in the  
ship).  
vicinity of this or any other appliance.  
Do not install the appliance in a  
~
room with too low an ambient  
Do not use any oils or grease on the  
~
door seal, as these will cause the seal  
temperature, e.g., a garage, as this  
may lead to the appliance switching off to deteriorate and become porous with  
for longer periods so that it cannot  
time.  
maintain the required temperature.  
Do not block the ventilation gaps in  
~
the plinth or the top of the appliance  
housing unit as this would impair the  
efficiency of the appliance, increase the  
electricity consumption and could  
cause damage to the appliance.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Never use a steam cleaner to clean  
Disposal of your old appliance  
~
the appliance. Pressurized steam could  
damage electrical components and  
cause a short circuit.  
Before disposing of an old  
~
appliance, first make the door latch or  
lock unusable.  
Do not use any electrical equipment  
~
inside the appliance. Danger of injury.  
Take off the door.  
~
Leave the shelves in place so that  
~
children may not easily climb inside.  
Consult with your municipal policy  
~
on recycling.  
Be careful not to damage any part of  
~
the pipework while awaiting disposal  
by:  
-
puncturing the refrigerant  
channels in the evaporator.  
bending any pipework.  
-
-
scratching the surface coating.  
Splashes of refrigerant can damage the  
eyes.  
Your old refrigerator may have a  
~
cooling system that used CFCs  
(chlorofluorocarbons). CFCs are believed  
to harm stratospheric ozone.  
If you intentionally release this CFC  
refrigerant, you can be subject to fines  
and imprisonment under provisions of  
environmental legislation. Make sure the  
CFC refrigerant is removed and disposed  
of by a qualified technician.  
SAVE THESE  
INSTRUCTIONS  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the wine storage unit  
aCirculation fans / Active charcoal filter  
bWooden racks  
cInsulation panel to separate the upper and middle temperature zones  
dBottle display rack  
eControl panel / Insulation panel to separate the middle and lower temperature  
zones  
fMain switch to turn the appliance On/Off  
gGlass door with UV filter  
hConnection (behind the ventilation gap) for the Home Security System (HSS)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the wine storage unit  
Control panel  
aAccess button  
fLong-term wine storage  
bUpper temperature zone  
cMiddle temperature zone  
dLower temperature zone  
gShort-term storage of white wine at a  
moderate temperature  
hShort-term storage of red wine at a  
moderate temperature  
eTemperature display:  
Allows you to set the temperature  
(X colder; Y warmer)  
and  
iOn/Off sensor button for the display  
lighting  
jOff sensor button for the temperature  
and/or door alarm*  
set the duration of the display  
lighting  
(X shorter; Y longer)  
* only visibly when the relevant function  
is activated  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before use  
Before using for the first time  
Turning the appliance On/Off  
^ Clean the inside of the appliance and ^ Open the appliance door.  
the accessories with a mild solution  
of warm water and liquid dish soap.  
Dry with a soft cloth.  
If the appliance was transported or  
laid horizontally for any reason, allow  
^ Turn the appliance On/Off with the  
it to stand vertical for at least 8 hours  
main switch.  
before turning it on. Failure to do so  
will affect the functioning of the  
The main switch is located on the  
appliance.  
right-side underneath the control panel.  
All three zones are switched on or  
off together.  
Once on, the appliance begins cooling.  
When the door is open, the interior  
lights come on.  
The access button will light in the  
control panel.  
The preset temperatures (factory  
settings) are reached after a few hours.  
,Turning off the appliance with  
the main switch does not safely  
isolate it from the power supply.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
Using the settings  
This appliance is operated with the use  
of touch keys activated by a finger.  
^ To turn the display lighting on or off  
when the door is closed, touch the  
"display light" sensor button.  
– An available button will appear white.  
– A selected button will appear yellow..  
^ Touch the access button so it turns  
^ To change the settings, touch the  
sensor button for the temperature  
zone you wish to set.  
yellow.  
The selected sensor button appears  
yellow.  
On the control panel you will now see  
the sensor buttons of the three  
temperature zones.  
You can now select from the following  
settings for the selected zone(s) or  
change the pre-set temperature(s) as  
desired.  
The factory (default) settings for the  
temperature zones are as follows:  
– upper temperature zone:  
red temper.  
– middle temperature zone:  
white temper.  
For more information on setting the  
temperature see "Optimum temperature  
and air quality".  
– lower temperature zone:  
wine storage.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
^ To de-select a temperature zone  
touch the sensor button for that  
particular zone so that it turns white,  
or select another sensor button.  
Custom settings  
In the custom settings mode you can  
select and change functions. The  
function possibilities are described in  
the respective chapters of this manual.  
Function  
Display text  
Temperature  
°C - °F  
^ To leave the settings menu, touch the  
access button "p" so it turns white.  
The last settings entered are stored.  
RemoteVision  
;
Module settings  
(optional accessory)  
The sensor buttons for the three  
temperature zones disappear from the  
control panel.  
Button sound on/off  
=
;
Even if you do not touch the access  
button, the electronics will switch back  
to normal after about 1 min.  
Exit Custom Settings  
mode  
Humidity settings  
§
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
Turning the button sound  
On/Off  
^ While holding down the X button,  
press the access button "p" once.  
Keep holding the X button down until  
the following appears in the display  
(approx. 5 seconds).  
If you prefer the buttons to be silent  
when touched, the button sound can be  
turned off.  
^ Tap the X button until = appears in  
the display.  
^ Touch the access button "p" to  
confirm.  
^ Touch the access button "p" so it  
turns yellow.  
^ By touching the X button, you can  
choose between:  
= 0 : Button sound is off  
= 1 : Button sound is on  
= – : Return to menu.  
^ Touch the access button "p" to  
confirm the setting.  
^ Touch the sensor button for any  
temperature zone so it turns yellow.  
^ Tap the X button until you see ; in  
^ Note the position of the X button, but  
the display.  
do not touch.  
^ Touch the access button "p" again so  
it turns white.  
Only the access button "p" is visible.  
^ Touch the access button "p".  
^ Place one finger on the position of  
the X button and hold (the X button  
will not be visible).  
You have now left the Custom settings  
mode.  
When you are in the Custom settings  
mode the door alarm is turned off  
automatically. Once the door is  
closed it is reactivated.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
Turning off for longer periods  
of time  
If the appliance is not going to be used  
for an extended time (for example,  
during a vacation) some precautions  
should be taken.  
^ Turn the appliance off at the main  
switch  
^ Unplug the appliance  
^ Clean the interior  
^ Leave the doors open to prevent  
odors  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alarm  
The appliance is equipped with an  
alarm system, to ensure that the  
temperature does not rise unnoticed  
because of energy loss or an open  
door.  
Turning the temperature alarm Off  
^ To turn the alarm off early, press  
the "alarm" sensor button.  
The alarm system is always  
operational, it does not need to be  
turned on.  
The alarm signal turns off. The "alarm"  
indicator remains red and the  
corresponding appliance zone  
continues to flash until the alarm  
condition is corrected.  
Temperature alarm  
If the temperature becomes too warm,  
an alarm sounds, the "alarm" indicator  
turns red and flashes. At the same time  
the affected zone flashes in the display.  
Door alarm  
If the appliance door is left open for  
over 5 minutes, an alarm signal will  
sound and the "alarm" indicator will light  
up.  
If you use the Home Security  
System, a temperature alarm will  
also trigger your security alarm.  
Once the temperature alarm is  
turned off, the security alarm will  
also shut off.  
Once the door is shut again the alarm  
will stop and the 'alarm' indicator will go  
out.  
The alarm will sound and the display  
will flash if:  
Turning the door alarm Off  
– too much warm air flows into the  
appliance, for example when bottles  
are being loaded, re-arranged, or  
unloaded.  
^ To turn the alarm off early, press  
the "alarm" sensor button. The "alarm"  
indicator and signal will turn off.  
– a large number of bottles are being  
stored for the first time.  
– the power fails.  
As soon as the alarm condition is  
corrected, the alarm signal turns off  
and the affected zone stops flashing in  
the display. The "alarm" indicator goes  
out.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optimum temperature and air quality  
Wine will continue to mature depending Setting the temperature  
on the surrounding conditions. The  
The factory (default) settings for the  
length of time which wine can be kept  
temperature zones are as follows:  
in good condition will therefore depend  
not only on the temperature but also on The upper temperature zone is set for  
the air quality.  
optimal red-wine storage:  
Red temper 61°F (16°C)  
The wine storage unit provides a  
constant temperature, increased  
The middle temperature zone is set for  
humidity and an odor-free environment, optimal white-wine storage:  
creating the best possible storage  
conditions for your wine.  
White temper 50°F (10°C)  
The lower temperature zone is intended  
for wine storage in general.  
Temperature  
Wine storage 52°F (11°C)  
Wine can be stored at temperatures  
between 41°F and 64°F (5 - 18°C). If  
you would like to store red and white  
wines together, choose a temperature  
between 50°F and 54°F (10 - 12 °C).  
Most white wines are palatable at this  
temperature. It is best to take red wine  
out of the appliance about 2 hours  
before drinking. Open the wine to allow  
it to breathe and to develop its aroma.  
After 2 hours, red wine will be at the  
correct temperature for drinking.  
You can change the "purpose" of the  
zones as you wish.  
For example, you can store white wine  
in the upper temperature zone, as long  
as you adjust the temperature  
accordingly:  
^ Tap the sensor button for the desired  
temperature zone, so that it turns  
yellow.  
Storage temperatures above 72°F  
(22°C) will cause wines to mature too  
quickly. By contrast, wine should not be  
stored below 41°F (5°C), since it will not  
mature fully at this low temperature.  
^ Select the preferred temperature  
setting so that the sensor button turns  
yellow.  
Fluctuations in temperature put wine  
under stress and interrupt the maturing  
process. Therefore, it is important to  
maintain a constant temperature.  
The setting "white temper" is not  
available in the lower temperature  
zone.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optimum temperature and air quality  
Temperatures can be independently  
set in all three zones.  
Once you have adjusted the  
temperature, check the temperature  
after a few hours. It will take this long  
for the appliance to reach the  
The unit comes factory pre-set for white  
wine, red wine, and wine storage.  
temperature. If, after this time, the  
temperature is still too high or too low, it  
should be adjusted again.  
The temperatures can be changed as  
desired.  
Temperature ranges  
– upper temperature zone  
3°C to 18°C or  
^ Select the temperature zone you  
would like to change the temperature  
in.  
37°F to 64°F.  
– middle temperature zone  
3°C to 18°C or  
37°F to 64°F.  
– lower temperature zone  
8°C to 18°C or  
Use the X and Y buttons next to the  
temperature display to set the  
temperature warmer or colder.  
46°C to 64°F.  
– The temperature will change in 1°  
increments.  
– Hold the button down to change the  
value continuously.  
– When the lowest or highest  
temperature is reached the  
corresponding arrow will no longer  
appear in the display.  
The factory-suggested temperature  
for the selected zone appears in  
yellow.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optimum temperature and air quality  
Insulation panels for thermal  
Temperature display  
separation  
The temperature display on the  
control panel always shows the  
required temperature.  
The unit has two fixed insulation panels,  
to divide the interior into the three  
different temperature zones. This  
allows you to store three different types  
of wine, such as red wine, white wine  
and champagne.  
The temperature display will flash if  
the temperature in one of the zones is  
too high or too cold.  
The correct serving temperature is  
crucial for the taste and therefore your  
enjoyment of the wine.  
Tap the X and Y sensor buttons to  
raise/lower the temperature 1°, or hold  
them down to move through the  
temperature range more quickly.  
The following temperatures are  
recommended for the different types of  
wine:  
Red wine:  
Rosé:  
57°F to 64°F  
(14 °C to 18°C)  
50°F to 54°F  
(10 °C to 12 °C)  
White wine:  
46°F to 54°F  
(8 °C to 12 °C)  
Sparkling wine: 45°F to 48°F  
(7 °C to 9 °C)  
Champagne:  
41°F to 45°F  
(5 °C to 7 °C)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optimum temperature and air quality  
Temperature unit  
^ While holding down the X button,  
(Fahrenheit/Celsius)  
press the access button "p" once.  
Keep holding the X button down until  
the following appears in the display  
(approx. 5 seconds).  
The temperature can be displayed in  
degrees Fahrenheit (°F) or Celsius (°C).  
^ Touch the access button "p" so it  
turns yellow.  
^ Tap the X button until appears in  
the display.  
^ Touch the access button "p" to  
confirm.  
^ By touching the X button you can  
select either Fahrenheit or Celsius for  
the temperature display.  
† 0: Fahrenheit  
^ Touch the sensor button for any  
temperature zone, so that it turns  
yellow.  
† 1: Celsius  
^ Note the position of the X button, but  
–: return to menu  
do not touch.  
^ Touch the access button "p" to  
confirm the setting.  
^ Touch the access button "p" again so  
it turns white.  
^ Tap the X button until a ; appears in  
Only the access button "p" is visible.  
the display.  
^ Place one finger on the position of  
the X button and hold (the X button  
will not be visible).  
^ Touch the access button "p".  
You have left the Custom settings  
mode.  
When you are in the Custom settings  
mode the door alarm is turned off  
automatically. Once the door is  
closed it is reactivated.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optimum temperature and air quality  
Humidity  
Setting the humidity level  
In a conventional refrigerator, the  
humidity levels are too low for storing  
wines. High humidity levels (60 - 70 %)  
are very important for the storage of  
wine, so that the corks remain moist.  
Under low humidity, the corks dry out  
from the outside and can no longer seal  
the bottles properly. This is why wine  
bottles should always be stored lying  
down, so that the wine can keep the  
corks moistened from within. If air  
enters the bottle, a wine will inevitably  
spoil.  
The unit comes factory pre-set to high  
humidity.  
If you would like to use the wine unit for  
long-term storage, it is recommended  
that you select the higher humidity. The  
interior climate will then correspond  
with the conditions in a wine cellar.  
Humidity is raised or lowered for all  
temperature zones simultaneously.  
Tip: Wine bottles should stand upright  
for at least two hours before serving, or,  
better still whole day long, to enable  
sediment to settle to the bottom of the  
bottle.  
^ Touch the access button "p" so it  
turns yellow.  
^ Tap the sensor button for any  
temperature zone so it turns yellow.  
^ Note the position of the X button, but  
do not touch.  
^ Touch the access button "p" again so  
it turns white.  
Only the access button "p" is visible.  
^ Place one finger on the position of  
the X button and hold (the X button  
will not be visible).  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optimum temperature and air quality  
^ While holding down the X button,  
If you have selected a higher  
press the access button "p" once.  
Keep holding the X button down until  
the following appears in the display  
(approx. 5 seconds).  
humidity setting, the fans will cut in.  
This is to ensure that the humidity is  
uniformly distributed throughout the  
interior.  
Whenever the unit door is opened,  
the fans will automatically switch off  
temporarily.  
^ Tap the X button until 0 appears in  
Air filtering with an active  
charcoal filter  
the display.  
^ Touch the access button "p" to  
confirm.  
External air passes through the filter  
before entering the unit.  
^ By touching the X button you can  
either increase or decrease the  
humidity inside the unit.  
o 0: lower humidity  
The active charcoal filter ensures that  
only clean, odor-free air enters the unit,  
creating additional protection against  
odor contamination.  
o 1: higher humidity  
o –: return to menu.  
The filter will need to be changed  
periodically, or when odors are  
present in the unit. See "Cleaning  
and Care - Active charcoal filter" for  
more information.  
^ Touch the access button "p" to  
confirm the setting.  
^ Tap the X button until a ; appears in  
the display.  
^ Touch the access button "p".  
You have left the Custom settings  
mode.  
When you are in the Custom settings  
mode the door alarm is turned off  
automatically. Once the door is closed  
it is reactivated.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing wine  
Storage tips  
Wooden racks  
– Always unpack bottles – do not store  
wine in crates or boxes.  
– Always lay bottles on their side for  
storage. This keeps the corks moist  
from the inside, preventing air from  
entering.  
– Store similar wine varieties beside  
each other on the same shelf, to  
avoid restacking and the need to  
disturbed other bottles.  
For convenient removal and addition of  
bottles, the wooden racks can be  
pulled out on rails.  
– Before serving, rosé and red wine  
bottles should spend at least two  
hours upright and open, to reach  
optimal drinking temperature.  
Sparkling wine and champagnes  
should be chilled briefly in the  
refrigerator before serving.  
The wooden racks can also be  
completely removed.  
^ Pull out the empty wooden rack  
(along with the rails) as far as the  
stop, then lift it up and out.  
– Remember that wine should always  
be cooled to slightly lower than the  
ideal serving temperature, as the  
temperature increases by 1° to 2° as  
soon as it is poured into a glass.  
^ To replace the racks, set them on the  
extended rails so that they click into  
place.  
Be sure that the ventilation slits at  
the rear of the unit are not blocked.  
They are essential for the unit to  
operate properly.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing wine  
Bottle display rack  
The display rack can only be attached  
to wooden racks with wide cross-ties. In  
the upper temperature zone, these are  
found in the lower position. In the lower  
temperature zones, they are found in  
both the upper and lower position.  
The display rack, allows you to display  
selected bottles so they can be seen  
even with the door closed.  
It is recommended that the wooden  
racks always be left in the pre-set  
positions. This makes optimal use of  
the interior space.  
Never stack bottles on the wooden  
racks. Only the bottom-most level in  
each temperature zone can support  
a stack of bottles (remove the  
wooden rack).  
^ Lay the wine bottles in the display  
rack, so that they touch the wooden  
guide-rail a.  
Maximum capacity  
The unit can hold approx. 102 bottles  
(0.75 l).  
^ To remove the display rack pull it up  
and out, then attach it to the rear  
position on the wooden rack b.  
The bottles can now be stored on the  
wooden rack in the usual manner.  
Additional display racks are  
available from Miele.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing wine  
Display lighting  
Duration of the display lighting  
The display lighting can be turned on if  
you wish the bottles to be lit up even  
when the door is closed.  
The display lighting is factory pre-set  
to 30 minutes.  
Turning on  
^ To change this time setting, press  
and hold the "Display light" sensor  
button for 2 seconds.  
^ Touch the access button "p" so it  
turns yellow.  
The set time (in minutes) appears in the  
display:  
Use the X and Y buttons next to the  
display to change the duration of the  
lighting in increments of 15 minutes.  
^ Touch the "Display light" sensor  
button so that it turns yellow.  
You can set the lighting to last for 15,  
30, 45, 60, 75 or 90 minutes.  
The display lighting will now remain on  
in the 2 lower temperature zones, even  
when the door is closed. When the door  
is open, the interior lighting also comes  
on in all three temperature zones.  
^ To confirm the setting touch the  
access button "p" until all the displays  
go out.  
Turning off  
If the door is closed before the set  
time is completed, the lighting  
duration starts over again from the  
beginning.  
^ Touch the "Display light" sensor  
button so that it turns white.  
The display lighting is now turned off.  
When the door is closed, the interior is  
dark, and when the door is opened the  
interior lighting comes on.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Defrosting  
During normal operation, condensate  
and frost can form on the rear wall of  
the refrigerator and drawers.  
You do not need to remove this  
build-up, it will defrost and evaporate  
automatically with the heat generated  
by the appliance.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
To better maintain your appliance  
avoid the following:  
To reduce the risk of electrical  
shock, disconnect the appliance  
from the power supply by shutting  
off the power main, tripping the  
circuit breaker or unplugging the  
power cord before maintenance.  
– cleaners containing soda, ammonia,  
thinners, or chlorides  
– cleaners containing descaling  
agents or lime removers,  
– abrasive cleaners,  
Never use cleaning agents  
– stainless steel cleaners,  
– dishwasher soap (powder),  
– caustic (oven) cleaners,  
containing abrasive substances  
such as sand, soda, acids, chlorides  
or chemical solvents.  
Non-abrasive cleaning agents are  
also unsuitable, as they can cause  
matte areas to appear.  
– scouring pads, steel wool, hard  
brushes,  
– glass cleaners (with the exception of  
the glass door front),  
Avoid getting water on the solid  
wood facing or the shelves.  
– metal scrapers,  
– eraser sponges,  
Do not use a steam cleaner to clean  
this appliance. Pressurized steam  
could penetrate electrical  
components and cause a short  
circuit.  
– steam cleaning products.  
Glass cleaners may be used to  
clean the exterior. However do not  
allow them to sit or "puddle", this can  
cause damage to the surface.  
Remove the cleaner promptly.  
Do not allow water to get into the  
electronic unit or lights.  
The data plate located inside the  
appliance must not be removed. It  
contains information which is  
required in the event of a service  
call.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Before cleaning  
Ventilation slits  
^ Check the ventilation slits regularly.  
Remove any dirt/dust with a vacuum  
cleaner or brush. Clean as needed.  
Door seals  
^ Use the main switch to turn the  
Do not use any oils or grease on the  
door seals as these will cause the  
seals to deteriorate and become  
porous over time.  
appliance off completely.  
The main switch is located on the right  
side underneath the control panel.  
^ Unplug the power cord.  
^ Clean the door seal with water only  
^ Remove any bottles from the  
and dry thoroughly.  
appliance and store it in a cool place.  
Active charcoal filters  
^ Take out any removable parts,  
e.g., shelves.  
Replacement filters are available  
from Miele.  
Cleaning the interior  
^ It is recommended to clean the  
interior once a month.  
^ Use a mild solution of warm water  
and liquid dish soap.  
^ Clean the wooden racks with a damp  
cloth. Do not allow the racks to  
become too wet.  
^ Remove the cover a over the filter,  
use a screwdriver if necessary.  
^ After washing, wipe down the interior  
and accessories with a clean wet  
cloth, then dry with a soft cloth.  
Leave the appliance doors open for a  
short time, so the moisture can  
evaporate.  
^ Remove the old filter b and replace  
with a new active charcoal filter.  
^ Replace the cover a over the new  
filter.  
After cleaning  
^ Return all bottles to the appliance.  
^ Insert the plug into the power outlet  
and turn on the appliance at the main  
switch.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Changing the light bulbs  
Never touch a halogen bulb with  
bare fingers.  
Do not remove the light covers for  
the display lighting. Should the  
lighting covers be damaged or need  
to be removed due to damage, do  
not look directly or with an optical  
instrument at the lighting.  
When inserting a glass halogen  
bulb, always hold with a soft cloth.  
Interior lighting:  
The lighting automatically switches off  
after the door has been open for  
approx. 5 minutes. This is not a fault.  
After the bulb has cooled for a short  
time it will turn on again.  
^ Pull the defective light bulb from the  
socket.  
If the light does not come on when the  
door is opened briefly, the light bulb  
should be changed.  
^ Place the new bulb in the socket.  
Halogen bulb type:  
5 W/12 V/socket G 4.  
^ Use the main switch to turn the  
appliance off.  
^ Put the light cover back on and turn  
clockwise into place.  
To reduce the risk of electric shock,  
disconnect the appliance from the  
power supply by unplugging or  
tripping the circuit breaker.  
Restore power to the appliance.  
^ Turn the light cover counterclockwise  
and pull out.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
With the aid of the following guide minor problems can be corrected without a ser-  
vice call.  
Repairs should only be carried out by a qualified and trained person in strict  
accordance with local and national safety regulations. Unauthorized repairs  
could cause personal injury or machine damage and may void the warranty.  
What if the appliance does not get cold?  
Possible fault  
Solution  
The machine is not turned on.  
Check whether the appliance is  
switched on at the main switch.  
The machine is not plugged in.  
Check that the plug is correctly  
inserted in the power outlet.  
Check that the fuse has not tripped.  
Reset the circuit breaker.  
If the breaker trips again the appliance  
or the outlet may be defective. Contact  
Miele or a qualified electrician.  
The temperature is set incorrectly.  
What if the temperature is too low?  
Select a warmer temperature.  
The door is not closed.  
Check the display.  
See "Setting the temperature".  
Check that the door has been closed  
properly.  
A large amount of bottles has been put This makes the compressor run for  
in the appliance at the same time. longer, causing the temperature in the  
appliance to fall automatically.  
What if the compressor kicks on very frequently and for too long?  
The ventilation slits in the plinth and in Clean with a vacuum or brush.  
the top of the appliance are covered or  
dusty.  
The door has been opened too  
frequently.  
Once the appliance returns to the set  
temperature the compressor will turn  
off.  
The door is not closed.  
Check that the door has been closed  
properly.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
What if the alarm is ringing?  
Possible fault  
Solution  
The appliance door has been open for Close the door.  
longer than 5 minutes.  
What if the alarm is ringing and the "alarm" indicator is lit?  
The door is not closed.  
One of these conditions has caused the  
temperature in the appliance to  
become too warm.  
The ventilation slits are covered.  
A large amount of wine was stored at  
once.  
Once the alarm condition has been  
corrected, the alarm will turn off and the  
"alarm" indicator will stop flashing.  
There has been a power failure.  
What if a fault message with"_F" appears in the temperature display?  
A fault has occurred. Contact Miele Technical Service.  
What if the display lighting is not working?  
The display lighting turns off  
automatically depending on the time  
set. See "Display lighting".  
If the display lighting still does not turn  
on after 15 minutes with the door  
closed, contact Miele Technical Ser-  
vice.  
A white coating has formed around the wine corks.  
The corks are made of a material which The white coating can be removed with  
has caused a chemical reaction  
(oxidation).  
a dry cloth.  
The coating has no effect on the quality  
of the wine.  
Mildew is beginning to form on the wine bottle labels.  
Depending on the type of adhesive  
used mildew may begin to form on the adhesive residue.  
labels.  
Wash the wine bottles and remove any  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
The appliance is making noises.  
Issue  
Possible fault  
Solution  
Brrrrr...  
Humming noise made by the  
compressor. This noise can get  
louder for brief periods when the  
motor is switching on.  
These noises are not a  
fault.  
The noise of the  
compressor and the  
coolant circulating in  
the system is  
Blubb, blubb...  
Click...  
A gurgling noise can be heard  
when coolant is circulating  
through the pipes.  
unavoidable.  
Clicking sounds are made when  
the thermostat switches the  
compressor on and off.  
Sssrrrrr...  
On multi-zone and frost-free  
appliances you can sometimes  
just hear the movement of air  
circulating inside the appliance.  
Creaking  
Creaking sounds can be heard  
when material inside the appliance  
expands.  
Rattling, vibrating The appliance is uneven.  
Realign the appliance  
using a level, by  
raising or lowering the  
screw feet underneath  
the appliance.  
The appliance is touching another Move it away.  
appliance or piece of furniture.  
Drawers, baskets or shelves are  
unstable or sticking.  
Check all removable  
items and refit them  
correctly.  
Bottles or containers are unstable Separate them.  
or knocking against each other.  
The transport cable clips are  
hanging loose at the back of the  
appliance.  
Remove the clips.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After sales service  
In the event of a fault which you cannot MieleCare  
easily fix yourself, please contact the  
(USA only)  
Miele Technical Service Department at  
the address on the back of this booklet. MieleCare, our Extended Service  
Contract program; gives you the  
When contacting the Technical Service  
assurance of knowing that your  
department, please quote the model  
appliance investment is covered by 5  
and serial number of your appliance  
years of worry-free ownership.  
given on the data plate inside the  
MieleCare is the only Extended Service  
appliance.  
Contract in the industry that guarantees  
repairs by a Miele Authorized Service  
Provider using genuine Miele parts.  
Only genuine Miele parts installed by  
factory-trained professionals can  
guarantee the safety, reliability and  
longevity of your Miele appliance.  
Please note that unless expressly  
approved in writing by the Miele Ser-  
vice department, Extended Service  
Contracts offered by other providers for  
Miele products will not be recognized  
by Miele. Our goal is to prevent  
unauthorized (and untrained) service  
personnel from working on your Miele  
products, possibly doing further  
damage to them, you and/or your  
home.  
To learn more about MieleCare  
Extended Service Contracts, please  
contact your appliance dealer or visit  
us online at:  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
Information is subject to change. Please refer to our website to obtain the most  
current product specification, technical & warranty information.  
To prevent accidents  
and machine damage  
read these instructions  
before  
installation or use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caring for the environment  
Disposal of packing materials  
Disposal of an old appliance  
The cardboard box and packing  
materials are biodegradable and  
recyclable. Please recycle.  
Old appliances contain materials that  
can be recycled. Please contact your  
local recycling center about the  
possibility of recycling these materials.  
Ensure that any plastic wrappings,  
bags, etc., are disposed of safely and  
kept out of the reach of babies and  
young children. Danger of suffocation!  
Before discarding an old appliance,  
disconnect it from the electrical supply  
and cut off the power cord to prevent it  
from becoming a hazard.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation site  
,In areas with a tropical climate  
(over 100°F/38°C and more than  
70% air humidity) the wine cooler  
must only be operated in air  
conditioned locations. Otherwise the  
function of the machine cannot be  
guaranteed.  
The appliance should be installed in a  
dry, well ventilated room.  
Do not install the appliance:  
- outdoors,  
- in an environment with dripping  
water,  
- in rooms which are at risk of frost.  
Have the appliance installed by a  
qualified technician, according to  
the enclosed installation instructions.  
The installation location should not be  
exposed to direct sunlight, nor near a  
heat source, such as an oven,  
radiator, etc.  
The ambient temperature should not  
drop below 55 °F (13 °C) or rise above  
110 °F (43 °C), otherwise malfunctions  
may occur.  
,WARNING  
This appliance is top-heavy and  
must be secured to prevent the  
possibility of tipping forward.  
Anti-tip protection is required.  
Keep the door closed until the  
appliance is completely installed  
and secured as per the installation  
instructions.  
If installation next to a heat source is  
unavoidable, observe the following  
minimum distances from the heat  
source:  
– 1 1/4" (3 cm) from an electric cooktop  
or electric oven.  
Empty weight of your machine:  
– 12" (30 cm) from a gas or oil  
cooktop, range or oven.  
KWT 16X1 Vi . . . . . . . 337 lbs (153 kg)  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Base  
Installation niche  
A fully loaded appliance is very heavy.  
The load-bearing capacity of your floor  
must meet the following requirements:  
To ensure safe, trouble-free installation  
and the best possible cosmetic result,  
check to be sure that the installation  
space complies with the installation  
dimensions. See "Niche dimensions".  
KWT 16x1 Vi. . . . . . . . 704 lbs (319 kg)  
To ensure that the appliance is installed  
securely and functions properly, the  
base must be flat, level and made of a  
hard, rigid material.  
The side walls of the installation cavity  
must be plumb.  
The minimum thickness of the side  
walls and the top wall must be 5/8"  
(16 mm).  
If in doubt, contact Miele.  
The minimum thickness of the toe-kick  
panel must be ½" (13 mm). A thickness  
of 3/4" (19 mm) is recommended.  
Furniture/fixtures  
The new appliance will be mounted  
securely to adjacent and overhead  
furniture/fixtures.  
Custom door panels  
For this reason it is essential that all  
attachable furniture/fixtures are  
connected securely to the base or the  
wall by suitable means.  
This appliance is compatible with all  
styles and designs of kitchen cabinetry.  
The total weight of the decorative  
panel(s) must not exceed the following:  
KWT 16x1 Vi. . . . . . . . . 137 lbs (62 kg)  
Ventilation  
The air intake and outlet must not be  
blocked or covered in any way. They  
also need to be dusted/cleaned on a  
regular basis.  
Do not install a solid custom door  
panel onto the front of the appliance.  
Condensation will form between the  
glass and custom door.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation options  
Side-by-side  
There are many different installation  
options. You are limited only by the  
design of the kitchen.  
This appliance can be installed  
"side-by-side" with another  
fridge/freezer using a "Merging Kit".  
The "Merging Kit" is available from  
Miele.  
The door hinge cannot be  
exchanged.  
Contact Miele or your dealer for  
specific information about which  
combinations will work with your  
appliance.  
Single column  
The appliance can be installed at any  
preferred location in the kitchen.  
However, be sure the door will open  
and close properly in the chosen  
location.  
For instructions on how to attach the  
appliances and install the heating  
mat, please refer to the instructions  
included with the "Merging Kit",  
available from Miele.  
Appliances attached together using  
the "Merging Kit"  
If the appliances are installed directly  
next to each other (without a partition),  
they need to be attached together  
using the "Merging Kit".  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation with partition using the  
"Merging Kit"  
Side panels  
If one side of the appliance is visible, a  
side panel must be used.  
The minimum thickness of the partition  
is 5/8" (16 mm).  
The side panel must be firmly secured  
to the wall, the floor and the overhead  
furniture/fixtures before the appliance is  
placed in the cavity.  
The dimensions of the side panel are  
taken from the opposite wall of the  
installation space. During installation,  
ensure that the cavity is square and the  
measurements are correct.  
Adjusting the door opening  
angle (optional accessory)  
Depending on the installation site, it  
may be necessary to adjust the door  
opening angle to 90°.  
If there is a partition with a thickness  
from 5/8" (16 mm) to 6 5/16" (160 mm)  
between the adjacent appliances, then  
each appliance should be individually  
installed within its own niche using the  
mounting accessories included.  
^ Open the door.  
The "Merging Kit" will also be needed.  
The "Merging Kit" is available from  
Miele.  
Installation with partition without  
using the "Merging Kit"  
If there is a partition with a thickness of  
more than 6 5/16" (160 mm) between  
the adjacent appliances, then each  
appliance should be individually  
installed within its own niche using the  
mounting accessories included (the  
"Merging Kit" is not necessary).  
^ Insert the banking pin through the  
holes and drive in with a hammer.  
The door opening angle is now limited  
to 90°.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions  
Door dimensions (open min. 90°)  
*The dimensions of the door fronts and  
handles will vary according to each  
individual kitchen.  
3/8" (10 mm)  
A
B
C
KWT 16X1 Vi 26 5/8" (677 mm) Door front max. 1 1/2" (38 mm)* Door handle*  
Door dimensions (open min. 115°)  
*The dimensions of the door fronts and  
handles will vary according to each  
individual kitchen.  
A
B
C
D
KWT 16X1 Vi  
26 5/8"  
Door front max.  
1 1/2" (38 mm)*  
Door  
11 3/4"  
(677 mm)  
handle*  
(299 mm)  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions  
Niche dimensions  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions  
Power supply  
1. Power supply  
A
KWT 16X1 Vi 12" (305 mm)  
Door front dimensions  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Before you begin  
– Level  
– Tape measure  
– Square  
Read these instructions completely  
and carefully.  
Have the appliance installed by a  
qualified technician, according to  
the enclosed installation instructions.  
When fastening the cabinet to the wall  
behind it (see "Installing the appliance")  
use:  
– suitable plugs/screws depending on  
the type of wall.  
To reduce the risk of injury or  
damage to the product, two people  
should be used for installation.  
– several mounting brackets, if required.  
Other  
These installation instructions are  
intended for use by qualified installers.  
In addition to these instructions, the  
appliance must be installed in  
accordance with all local codes. In the  
absence of a local code, the following  
should be used:  
– Stepladder  
– Dolly, hand truck  
– Wooden beam  
(cross section min. 3" x 4"  
[75 mm x 100 mm] as an alternative  
tilt protection, length depends on the  
width of the installation cavity)  
– In the USA, the National Electric  
Code, ANSI/NFPA 70 - latest  
edition/State and Municipal codes  
and/or local codes.  
– Wood screws in different sizes  
Optional accessories  
– In Canada, the Canadian Electric  
code C22.1 - latest edition/Provincial  
and Municipal codes and/or local  
codes.  
– "Merging Kit" for side-by-side  
installation  
– RemoteVision module for wireless  
installation  
Tools needed for installation  
– Cordless screwdriver  
– Torx screwdriver  
– Hammer drill  
– Wood drills in different sizes  
– Hammer  
– Rachet (5/16" / 8 mm)  
– Adhesive tape  
– Multi-grip pliers  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Aligning the housing unit  
Check the installation niche  
To ensure a safe, trouble-free  
installation and the best possible  
cosmetic result, check to be sure  
that the installation space complies  
with the installation requirements.  
^ Check the base (see "Installation").  
^ Check the dimensions of the cavity.  
^ Check that the cavity is square.  
^ Check the location of the power  
outlet.  
^ Check that all furniture parts in the  
vicinity of the appliance are securely  
connected to the wall.  
The housing unit must be carefully  
aligned using a spirit level before  
installing the appliance. The unit  
corners must be at right angles, as  
otherwise the furniture door will not  
align correctly with the 4 corners of the  
appliance.  
^ Check that the adjacent  
furniture/fixtures do not collide with  
the open door.  
Before installation  
,Caution - the appliance is very  
heavy. Use caution when unpacking  
and opening the door, danger of  
tipping.  
– The side panels of the housing must  
be even.  
– The housing unit panels must be at  
least 5/8" (16 mm) thick.  
^ To protect the base from damage  
during installation, attach a hard  
board, linoleum, etc., to the floor in  
front of the intended installation  
location.  
– The plinth facing must be at least  
1/2" (13 mm) thick, preferably 3/4"  
19 mm).  
^ Remove any cable clips from the  
back of the appliance.  
^ Take the supplied accessories out of  
the protective packaging.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
^ From the rear of the appliance  
carefully lift it from the pallet.  
Once the appliance is on the ground it  
can be rolled around.  
RemoteVision module  
installation  
(optional accessory)  
^ Do not remove the installation  
supports from the appliance doors.  
They will be used later in the  
installation niche.  
Always disconnect the appliance  
from the power supply when  
performing installation, maintenance  
or service work.  
There are transportation safety  
devices inside the appliance to  
protect the shelves until installation  
is complete. Do not remove them,  
or parts may be damaged.  
Install the RemoteVision module  
before placing the appliance in its  
installation niche.  
Once connected the RemoteVision  
module will increase the energy  
consumption of the appliance.  
^ Check the appliance for damage in  
transit.  
The slot for the RemoteVision module is  
located in the lower area of the back of  
your appliance.  
Do not install the appliance if it is  
visibly damaged. If in doubt, contact  
Miele.  
^ Unscrew the screws a on the cover  
b and pull off the sticker c.  
^ Loosen the bracket that holds the  
appliance to the pallet.  
^ Remove the cover b.  
,Caution! The appliance is no  
longer secured and may be unstable.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
^ Push the module into the slot until it  
locks into place.  
^ Pull the antenna d straight out.  
^ Connect the appliance to the power  
supply and turn it on. After several  
seconds the indicator light e will  
come on.  
^ Guide the cover b over the antenna  
d and screw on the cover.  
^ Angle the antenna d so that it faces  
to the right or left.  
The indicator light will display different  
colors one after the other; any control  
light at the end indicates that the  
module was correctly installed.  
^ If necessary, disconnect the power  
supply and continue installing the  
appliance.  
If the indicator light does not come on,  
installation of the module was  
If you would like to connect your  
appliance to the Home Security  
System, proceed now (see "Home  
Security System").  
unsuccessful. In that case, repeat the  
process. If that does not correct the  
problem, contact Miele.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Home Security System (HSS)  
If desired, the wine storage unit can be  
connected to the security system of  
your house, via a switching contact.  
If connected, you will be immediately  
informed of rising temperatures in the  
wine cooler.  
The Home security system  
connection must be hooked up  
before the unit is installed.  
^ Choose the desired switching  
contact and connect according to  
alarm system requirements.  
Contact a qualified electrician or  
authorized agent from alarm  
Output of the Home Security System on  
the electronic board:  
company to connect your home's  
security system to the wine cellar.  
Always disconnect the appliance  
from the power supply before  
performing installation, maintenance  
or service work.  
NC:  
normally closed  
Com: common  
NO:  
normally open  
Switching capacity: 120 V/250mA  
30 V/1A  
^ Continue with the appliance  
installation.  
^ Remove the toe-kick panel from the  
appliance.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Preparing the installation  
niche  
Anti-tip-brackets  
The anti-tip brackets help keep the  
appliance safely secured to the  
installation niche to prevent tipping.  
,Keep the appliance door closed  
until it is securely fastened in the  
niche. Tipping hazard.  
Two anti-tip brackets are  
recommended for each appliance or  
appliance combination (side-by-side).  
Because of the size and weight of  
the appliance, it is essential to  
ensure that the appliance cannot tip  
over once it has been mounted in  
the niche.  
Mounting Accessories  
The mounting accessories needed for  
installing the appliance into the niche  
are included in the packaging. Several  
plastic bags are included which are  
numbered alphabetically.  
If the installation niche is deeper than  
the appliance, a solid wooden beam a  
can be placed behind the anti-tip  
brackets b so the appliance can be  
securely attached to the base or wall.  
The bag needed for each step will be  
marked with its respective letter.  
The length of the wooden beam a  
should be the width of the installation  
space.  
^ Use the included Torx screwdriver to  
tighten the screws.  
The distance "D" between the anti-tip  
brackets b is the width of the  
appliance.  
^ Position the anti-tip brackets b on  
the left and right walls of the  
appliance niche.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
^ Mark the holes through the anti-tip  
brackets b on the floor of the  
installation niche.  
Be certain that the screws penetrate  
through the flooring and into the wall  
plate a minimum of 3/4" (19 mm).  
^ Set the brackets aside.  
If the included anti-tip brackets cannot  
be secured in the niche, the built-in  
cabinet must be secured to the wall  
behind it with several screws. Only in  
this way can the appliance later  
secured in the built-in cabinet be  
prevented from tipping.  
Screws are supplied with the  
appliance for various  
applications/materials.  
If the anti-tip brackets cannot be  
attached securely with the screws  
supplied, an alternative anti-tip  
device can be used.  
In a cabinet with a back wall  
Assure that there are no electrical  
wires or plumbing in the area which  
the screws could penetrate-risk of  
injury and damage.  
^ screw the back wall of the cabinet in  
several places directly to the wall  
behind it.  
^ Drill pilot holes:  
For this, use suitable plugs/screws  
depending on the type of wall.  
– 1/8" (3 mm) for the 5 x 60 mm wood  
screws  
– 1/16" (2 mm) for the 4 x 15 mm wood  
screws.  
^ Tightly secure the anti-tip brackets in  
the niche.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
In a cabinet without a back wall  
Securing an alternative anti-tip  
device  
If the anti-tip brackets cannot be  
attached securely, an alternative  
anti-tip device can be used.  
Ensure that there is no "give" between  
the appliance and the anti-tip device.  
If possible, always screw the  
wooden beam to existing studs.  
screw the cabinet to the wall behind it  
in several places using suitable  
mounting brackets.  
For this, use suitable plugs/screws  
depending on the type of wall.  
– Cut a wooden beam  
(cross section min. 3" x 4"  
[75 mm x 100 mm]) to the required  
length.  
– The length is equal to the width of  
the installation niche.  
– If the installation cavity is deeper  
than the appliance, select a beam  
which has a larger cross section, or  
attach two beams.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
– The beam must cover the appliance  
by at least 2" (50.8 mm).  
Sliding the appliance into the  
installation niche  
^ Mark the installation height (lower  
edge of the beam) on the rear wall of  
the niche.  
If a side-by-side installation is  
desired, connect the two appliances  
together. See the Installation Manual  
included with the "Merging Kit".  
^ Select screws according to the  
thickness of the wooden beam.  
Example: 3 ½" (89 mm) screw for 2x4  
beam.  
^ Determine the number of screws  
based on the cavity width, to ensure  
that the beam will be attached  
securely.  
^ Locate wall studs near the rear wall  
of the cavity and mark drill holes in  
the beam.  
^ Pre-drill the wooden beam.  
^ Attach the wooden beam to the rear  
wall of the niche.  
^ Unscrew the plinth.  
^ To protect the corners of the  
installation space, attach the  
supplied edge protector a on both  
sides with adhesive tape.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
^ Plug the appliance into the power  
Aligning the appliance  
outlet b.  
^ Align the appliance with the custom  
front.  
The plug of the appliance should be  
easily accessible after installation.  
If the plug is not accessible after the  
appliance has been installed,  
disconnection from the power  
supply should be completed via the  
circuit breaker.  
In the case of side-by-side  
installations, a separate outlet must  
be used for each appliance.  
^ To prevent the power cord from  
becoming caught:  
Tie a piece of string to the middle of  
the power cord and feed it forward  
under the appliance. When sliding  
the appliance in, pull the cable  
forward c.  
The installation aids e on the  
appliance door have been designed for  
custom door thicknesses of 3/4" (19  
mm) and 1 1/2" (38 mm).  
^ Carefully slide the appliance into the  
space until the height-adjustable  
wheels interlock with the anti-tip  
brackets d.  
The height-adjustable feet at the front  
and rear can all be adjusted from the  
front:  
– Front feet:  
If resistance is felt when attempting to  
slide the appliance into the installation  
niche - for example, because the floor  
is uneven,  
Adjust with a rachet (5/16" / 8 mm)  
f
– Rear feet:  
Adjust with a (cordless) screwdriver  
and/or a rachet (5/16" / 8 mm) for fine  
adjustment g  
^ Turn the rear adjustable wheels  
slightly outward (see "Aligning the  
appliance"), then push the appliance  
in.  
^ Use a level to align the installation  
aids e on the door.  
Be careful not to damage the power  
cord attached to the floor.  
^ Remove the edge protector a.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Attaching the appliance to the  
installation niche  
Important!  
When unscrewing the  
height-adjustable feet, proceed  
gradually, alternating between left  
and right.  
^ Unscrew the height-adjustable feet  
until the mark on the base has  
reached the indicated guide  
dimension 1 1/4" (32 mm). The guide  
dimension of 1 1/4" (32 mm) is  
related to a niche height of 84"  
(2134 mm).  
^ Screw the attachment plate lugs h to  
the overhead furniture/fixtures.  
^ Align the custom doors with a level.  
Note:  
– When unscrewing the  
height-adjustable feet, proceed  
gradually, alternating between left  
and right.  
– If using a wooden beam as an  
alternative anti-tip device, rotate the  
appliance all the way toward the  
wooden beam.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
If there is no way to attach the top of  
the appliance, it can be attached to the  
sides of the installation niche.  
^ If necessary, shorten the filler strip j  
to the required height.  
^ Place the 2 strips on top of each  
other k.  
^ Insert the filler strip until you hear it  
click into place l.  
For a side-by-side combination the filler  
strips from both appliances are put  
together to form one long filler strip:  
^ Pull out the plate side lugs i.  
^ Take the peg from the "side-by-side  
merging kit" and insert it halfway into  
the filler strip rail on the left-side  
appliance.  
^ Secure the attachment plate side lugs.  
^ Place the second filler strip on the  
peg and press both filler strips  
together.  
^ Insert both filler strips into the  
installation space above the  
appliance, until they click into place.  
If there is a fairly large gap above the  
appliance, cut a wooden beam to fit  
exactly and place it in the gap.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
^ Open the appliance door.  
Preparing the custom door  
^ Open the appliance door.  
^ Unscrew the installation supports n  
from the appliance door.  
^ Loosen the remaining screws from  
the strips o on each side of the door,  
then remove.  
^ Screw the attachment plate lugs m to  
the adjacent furniture/fixtures.  
^ Set aside the screws and side strips  
o - you will need them again later.  
With side-by-side combinations, only  
the external side of the appliances can  
be secured to the niche.  
^ Take off the light switch cover.  
^ Close the appliance door.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
^ Also calculate and mark the center of  
the custom door Y.  
^ Remove the mounting frame from the  
appliance door and position it  
according to the markings on the  
custom door.  
^ Pre-drill the holes.  
^ Tightly screw on the bracket using  
the pre-drilled holes:  
Attach the bracket to each  
attachment point with at least one  
screw.  
^ Measure the distance X between the  
bracket and the overhead  
furniture/fixtures.  
^ Attach the bracket at the top with at  
least 6 screws:  
^ Loosen the two nuts.  
Set aside the nuts - you will need  
them again later.  
^ With the inside facing up, lay the  
custom door on a stable surface (to  
avoid scratch marks, place some  
plastic or a cloth on the surface).  
The bracket includes a variety of holes  
for the various design options of  
custom doors.  
When performing any work on the  
custom door, always observe the  
following:  
– Always select the best load-bearing  
surface of the custom door as the  
location for screws.  
– Select a screw length that is shorter  
than the thickness of the door front.  
^ Secure the door handle to the front of  
the appliance from the inside.  
^ Mark the distance X on the back-side  
of the custom door.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Attaching and aligning the  
custom door front  
^ Align the custom door height with the  
threaded bolts p.  
^ Now tighten the nuts q on top. This  
secures the appliance door.  
^ Open the door and hang the custom  
door with the mounting frame over  
the threaded bolts p.  
^ Put the side strips o back into place  
and screw them completely down on  
both sides of the appliance door.  
Bag E contains spare screws for this  
purpose.  
^ Screw the nuts q a few turns onto  
the threaded bolts p. Do not tighten  
the nuts completely.  
^ Close the appliance door and check  
the distance to doors of adjacent  
furniture/fixtures.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Attaching the covers  
^ Insert the cover strip into the space  
between the appliance and the side  
panel.  
^ To mount the cover strips on both  
sides of the door, click them into  
place from bottom to top, into the  
gap between the appliance door and  
the custom door.  
For side-by-side combinations, the  
cover strips (on both sides of the  
appliance) are applied to the  
outermost spaces only.  
^ Attach the light switch cover.  
^ Screw the brackets onto both sides  
of the appliance, to hold the cover  
strip.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Attaching the toe-kick cover  
^ Attach the toe-kick cover to the  
plinth.  
The maximum height of the toe-kick  
cover is 4" (102 mm) from the top of  
the floor. Do not cover ventilation  
slits in the plinth. Risk of damage to  
the appliance.  
Attaching the cover strips  
^ If required, cut the toe-kick cover to  
the required length and height.  
If the frame width is narrow, the cover  
strip side piece may need to be  
shortened.  
To determine the required length of the  
side piece, one test piece is enclosed  
with the cover strip.  
^ and put the included cover plates in  
place.  
^ Remove the foil from the adhesive  
strips.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Mounting the air separator  
The air separator keeps the supply and  
exhaust air separate. This prevents  
warm exhaust air from flowing into the  
machine, optimizing the energy  
performance of the unit.  
^ Cut the cover strips (long for the  
sides of the door) to the required  
length X.  
^ Push the cover strips on the into the  
gap between the furniture door and  
glass pane.  
^ If necessary, shorten the three parts  
of the air separator.  
^ Insert the foam pieces back into the  
sides.  
^ Cut the cover strips (short for the top  
and bottom of the door) to the  
required length Y.  
^ Push the cover strips into the gap  
between the furniture door and glass  
pane.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
^ Position the air separator in the  
center of the appliance door.  
^ From below, screw the air separator  
firmly onto the door with the 2  
screws.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection  
The appliance is supplied with a  
UL-listed, 3-wire power cord and  
NEMA 5-15 P plug ready for connection  
to a 120 V, 60 Hz supply.  
, Avoid the risk of electrical  
shock  
- Plug into a grounded 3-prong  
outlet.  
The fuse rating is 15 amps.  
- Do not move the ground plug.  
- Do not use an adapter.  
- Do not use an extension cord.  
The appliance requires a 3-wire  
receptacle.  
The receptacle must be installed by a  
licensed electrician only.  
Failure to follow these instructions  
can result in death, fire, or electrical  
shock.  
In the case of side-by-side installations,  
a separate outlet must be used for each  
appliance. Ideally, the power outlet  
should be next to the appliance and  
easily accessible. Do not connect the  
appliance to the power supply by an  
extension cord. Extension cords do not  
guarantee the required safety of the  
appliance (danger of overheating).  
Improper connection of the  
equipment grounding conductor  
may result in electric shock. If you  
are in any doubt as to whether the  
appliance has been properly  
grounded, have the appliance  
checked by a qualified electrician or  
service technician.  
If any changes are needed to the  
household wiring or power supply, this  
work must be performed by a qualified  
electrician.  
Installation, repairs and other work  
by unqualified persons could be  
dangerous.  
Before installing the appliance,  
verify that the voltage, load and  
circuit rating information found on  
the data plate match the household  
electrical supply.  
If there are any questions regarding the  
electrical connection of this appliance  
to the power supply, please consult a  
licensed electrician or call the Miele  
Technical Service.  
U1-800-999-1360  
V1-800-565-6435  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RemoteVision (optional accessory)  
Miele's RemoteVision Wi-Fi technology  
creates a 'virtual link' between your  
appliance and our monitoring center. If  
a fault occurs, Miele's client service  
center will be notified and contact you,  
or another trusted individual identified  
on your call roster, in order to gain  
access to your appliance to fix the  
problem.  
Be sure your wireless system meets the  
following requirements  
– A wireless router that supports an  
IEEE 802.11b protocol  
– Windows XP® or newer operating  
system, Mac® OS X 10.3 or higher  
– Cable or DSL modem  
– Microsoft® Internet Explorer 6 or  
higher, Safari 2.0 or higher, Firefox  
1.5 or higher  
For information on set-up and  
installation of the RemoteVision module  
see the "Installation" section of this  
manual.  
* Please note that each wireless router  
manufacturer supplies their own device  
drivers and setup programs. Due to the  
differences in manufacturers, exact  
router setup instructions are not  
included in this manual. Wording and  
instructions may vary.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RemoteVision (optional accessory)  
Accessing the RemoteVision  
^ Tap the X button until ; appears in  
the display.  
control panel  
^ Touch the access button "p" to  
confirm.  
See the table on the following page for  
a description of each setting in the  
display.  
^ Touch the access button "p" so it  
turns yellow.  
^ Use the Y or X buttons to select the  
RemoteVision options.  
The module has been connected to  
the network when ; # appears in the  
display.  
^ Touch the sensor button for any  
temperature zone so it turns yellow.  
If ; # does not appear, refer to the  
"Network options" section of the  
XKM 2000 Installation Instruction  
manual.  
^ Note the position of the X button, but  
do not touch.  
^ Touch the access button "p" again so  
it turns white.  
^ Press and hold the access button "p"  
for 2 seconds to confirm the change.  
Only the access button "p" is visible.  
^ Place one finger on the position of  
the X button and hold (the X button  
will not be visible).  
^ To return to the main menu, tap the X  
button until a solid ; - appears in the  
display.  
^ While holding down the X button,  
press the access button "p" once.  
Keep holding the X button down until  
the following appears in the display  
(approx. 5 seconds).  
^ Press the access button "p" to  
confirm.  
^ Tap the X button until a ; appears in  
the display.  
^ Touch the access button "p".  
You have left the Custom settings  
mode.  
Access to the Custom settings mode is  
now active for approximately 10  
seconds.  
When you are in the Custom settings  
mode the door alarm is turned off  
automatically. Once the door is  
closed it is reactivated.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RemoteVision (optional accessory)  
MasterCool control panel options for RemoteVision  
Status indicators Description of function  
Flashing ; ~  
Flashing ; ‡  
Flashing ; |  
Module booting phase  
Not connected to network  
Connection to network established, no IP address  
assigned  
Solid  
; #  
Connected to network  
Flashing ; <  
In Ad-Hoc Mode, not connected  
In Ad-Hoc Mode, connected  
Flashing ; =  
Selectable  
options  
Description of function  
; -  
; 2  
; 3  
; 4  
Back  
Reboot the module  
Reset to factory settings  
Enter Ad-Hoc Mode  
Note: If you cannot select any option (other than ; - "Back", the module has not  
been installed correctly.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved / 4911  
M.-Nr. 09 170 080 / 03  
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST  
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

National Instruments Network Router MCA 7724 User Manual
Nikon Network Router MFX 1930 User Manual
Niles Audio Satellite Radio TM XM User Manual
NordicTrack Home Gym NTEL42552 User Manual
NordicTrack Treadmill NTTL10610 User Manual
NuTone Outdoor Storage 935 936 User Manual
Omega Thermometer HH68K User Manual
One for All TV Video Accessories 703185 User Manual
OWI Speaker IC5 KIT User Manual
Panasonic Network Card AJ CA910P User Manual