Operating Instructions
Dishwasher
G 5500
G 5505
G 5510
G 5515
en - US, CA
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
M.-Nr. 09 016 330
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Turbo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Opening the "Settings" menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Language ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Rinse aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Optimize standby. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Refill indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Soak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Pre-rinse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Extended drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Filter check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Showroom program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Leaving the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Technical faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Faults in the water intake/water drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
General problems with the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Poor cleaning results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
User Maintenance Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Triple filter system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Help to protect the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING –
Electrical Safety
Before installation, make sure that
~
the voltage and frequency listed on the
data plate correspond with the
When using your dishwasher, follow
basic precautions, including the
following:
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Read all instructions before
installation or use of the dishwasher
to prevent injury and machine
damage.
Before installation or service,
~
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
Use the dishwasher only for its
intended purpose. This appliance is
intended for residential use only.
Do not use an extension cord to
~
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Keep these operating instructions in
a safe place and pass them on to
any future user.
Be certain your appliance is
~
Correct usage
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician.
The dishwasher is not designed for
~
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as, shops, offices and showrooms
or guest houses.
The dishwasher is not intended for
~
outdoor use.
It must only be used as a domestic
~
appliance as specified in these
If the supplied power cord is
~
damaged it must only be replaced by a
Miele Service technician with a genuine
Miele power cord.
operating instructions, for cleaning
domestic crockery and cutlery. Any
other usage is not supported by the
manufacturer and could be dangerous.
The outlet must be accessible at all
~
times after installation to disconnect the
Persons who lack physical, sensory
~
dishwasher.
or mental abilities, or experience with
the appliance should not use the
dishwasher without supervision or
instruction by a responsible person.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Installation
This dishwasher should only be
~
installed under a continuous counter
The dishwasher must be installed
~
and connected in accordance with the
installation instructions.
top secured to adjacent cabinetry.
Do not install this dishwasher
~
beneath a cooking surface, oven or any
Installation and repair work should
~
appliance that radiates heat.
be performed by a Miele authorized
service technician. Work by unqualified
persons could be dangerous and may
void the warranty.
High temperatures from these units
may damage the dishwasher.
A toe-kick must be used with the
~
dishwasher. If the supplied toe-kick is
not used, a cabinet matching toe-kick
must be installed.
Do not install or use a damaged
~
dishwasher. A damaged appliance is
dangerous. Unplug the machine and
contact Miele Technical Service
Department.
Do not install the dishwasher in an
~
area where it will be exposed to
temperatures below freezing.
Ensure that any plastic wrappings,
~
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Do not cut the intake hose or
~
submerge it in liquid. This hose
contains electrical components that
could cause injury or property damage
if cut or submerged.
This appliance must not be used in
~
a non-stationary location (e.g. on a
boat).
Only power up the dishwasher when
~
all installation and plumbing work is
complete.
, WARNING - Fire hazard!
~
Do not cover or crush the plug of the
appliance. Ensure that the cabinet
opening for the dishwasher provides
ample space for the plug and cord.
Installing the dishwasher in a tight
space may crimp the power cord or put
pressure on the plug which could
cause overheating.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Use
Do not inhale or swallow detergents.
~
Dishwasher detergents contain irritant
To reduce the risk of injury, do not
~
allow children to play in, on or near the
and corrosive ingredients. They can
cause burning in the mouth and throat if
swallowed, or inhibit breathing. Consult
a doctor immediately if detergent has
dishwasher. It is possible for small
fingers may be pinched in the door.
Only use the dishwasher if all panels been swallowed or inhaled.
~
are properly in place.
Do not drink water from the
~
dishwasher! Harmful residues could be
Do not tamper with the controls.
~
present.
Do not sit or stand on the door or
~
baskets of the dishwasher. Close the
Do not fill the rinse aid reservoir or
~
door when not in use.
salt container with detergent. It will
destroy the rinse aid compartment and
water softener.
Under certain conditions, hydrogen
~
gas may be produced in a hot water
system that has not been used for two
weeks or more. HYDROGEN GAS IS
Dishes can be very hot at the end of
~
a program. Allow the dishes to cool
EXPLOSIVE. If the hot water system has until they are cool enough to handle
not been used for such a period, turn
on all hot water faucets and let water
flow from each for several minutes
before using the dishwasher. This will
release any accumulated hydrogen
gas. Do not smoke or use an open
flame during this time.
before unloading them.
The water supply must be turned off
~
when the appliance is not used for a
longer period of time (e.g. during
vacations).
Disposal of an appliance
Be sure that all items placed in the
~
dishwasher are "dishwasher safe". For
items not labeled, check the
If the appliance is removed from its
~
installation site and will not be used,
remove the doorlock to the wash
cabinet to prevent children from locking
themselves in the machine.
manufacturer’s recommendations.
When loading tableware, place
~
sharp items away from the door to
prevent damage to the seal. Load
sharp items pointing downwards to
prevent injuries.
SAVE THESE
INSTRUCTIONS
Only use detergents and rinse aids
~
recommended for residential
dishwashers. Keep all detergents and
rinse aids out of the reach of children.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
a Upper spray arm (not visible)
b Cutlery tray
gTriple filter system
hData plate
c Upper basket
iChild Safety Lock in the door handle
(not visible)
d Middle spray arm
jRinse aid reservoir
e Air inlet for drying
(depending on model)
kDual compartment detergent
dispenser
f Lower spray arm
lSalt container
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Control panel
aProgram selection
fIntensive lower basket button with
indicator light
bDisplay
gProgram selector button
cStart / Stop button with indicator light
dDelay Start button with indicator light
eTurbo button with indicator light
hOn/Off K button
This operating instruction manual describes several dishwasher models with
different indicated settings.
The different dishwasher models are named :
Standard = 32 1/16" (81.5 cm) high dishwashers
XXL
= 33 11/16" (85.5 cm) high dishwashers.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Energy saving washing
This dishwasher is exceptionally
economical in the use of water and
electricity. For best results follow these
tips:
^ For lowest energy consumption you
may connect the dishwasher to a
cold water source.
^ For fastest possible wash times, with
slightly higher energy consumption,
connect the dishwasher to a hot
water source.
^ Make full use of the baskets without
overloading for the most economical
washing.
^ Use the correct amount of detergent
and rinse aid. Detergent dosage is
dependent upon the amount of
soiling and type of dishware being
washed. See the "Program Guide" for
more information.
^ When using powder or gel detergent,
reduce the amount to 2/3 of the
normal amount when washing a small
load.
^ Choose a program that best suits the
degree of soiling and the type of
dishes being washed.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To open the door
Child safety lock
^ Reach under the handle and pull the
Te child Safety Lock is designed to
prevent children from opening the
dishwasher.
door open.
If the door is opened during operation
the dishwasher will stop running. Once
the door is closed the program will
restart.
^ To lock the door, push the slider
below the door grip to the right.
^ To unlock the door, push the slider to
the left.
To close the door
^ Push the baskets in.
^ Lift the door and push until it clicks
into place.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Display Functions
The following functions can be selected
or set on the display:
– wash program
– options
– delay start
– settings
Settings menu
You can adjust the dishwasher's
electronics to suit various requirements
in the Settings menu.
While a program is running, the display
shows:
See the"Settings" section of this manual
for more information.
– the program segment
The function of the buttons below the
display is turned off in the Settings
menu, allowing you to select and
confirm menu items using these
buttons.
– the approximate remaining time
– any faults or messages
To save energy, if a button is not
pressed within a few minutes the
display will turn off. To show the
display again, press any button.
The left and right arrows in the display
indicate that additional selections are
available. You can choose these
selections using the left or right button
below the display.
Use the center button below the display
to confirm messages or settings and
change to the next menu or submenu.
(
A check will appear beside the
currently selected setting.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
^ Press the K button to turn the
dishwasher on.
If there is a fault, it will help the service
technician to know the hardness of your
local water supply.
A Welcome screen shows when the
dishwasher is turned on for the first
time.
Please note your water hardness
below:
Language
°d (gr/gal)
The display changes automatically to
the language setting.
The water hardness was programmed
at 1 °d (1 gr/gal) by factory default.
^ Select the desired language and
confirm with the center button.
^ Select the hardness of your water
supply and confirm with the center
button.
The selected language set is marked
with a ( check.
Water hardness
See "Settings - Water hardness" for
more information.
The display changes to the water
hardness setting.
Two notes appear in the display.
To achieve good cleaning results, the
dishwasher needs soft water. Hard
water results in calcium deposits on
dishware and in the dishwasher.
If your tap water hardness is above 4 °d
(4 gr/gal [US]), the water should be
softened.
After confirming these notes, : Add
rinse aid and/or : Add salt may
appear in the display.
Confirm these notes. The display
changes to the Main menu.
These basic settings are saved after
the first full program cycle is
completed.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– The dishwasher must be
programmed to correspond to the
water hardness in your area.
– In areas where the water hardness
fluctuates (e. g. 37 - 50 °d
[39 -52 gr/gal]) always program the
machine to the higher value (in this
example 50 °d [52 gr/gal]).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
^ Remove the lower basket from the
wash cabinet and unscrew the salt
container lid.
Every dishwasher is tested before
leaving the factory. Any water
remaining in the machine is from the
final factory test and does not
indicate that the machine has been
used.
When opening the salt container,
water will run out. Open the
container only to refill salt.
Filling the salt container
Important: The salt container must
be filled with 2 quarts (2 l) of water
before adding salt for the first time
so the salt can dissolve
To achieve good cleaning results, the
dishwasher needs soft water (water that
is low in minerals). Hard water results in
calcium deposits on dishware and in
the dishwasher.
properly. Water does not have to be
added with subsequent refills.
Therefore, if your tap water hardness is
above 4 °d (4 gr/gal) the water should
be softened. The built-in water softener
is designed for this purpose. The water
softener is suitable for a water hardness
up to 70 °d (73 gr/gal).
,Inadvertently filling the salt
container with dishwashing
detergent (including liquid
detergent) will damage the water
softener.
,Only use water softener salt
specially formulated for
dishwashers. Other salts may
contain insoluble additives which
can impair the water softener.
If using "Tab" products which
include salt, still add salt to the
machine to achieve optimal cleaning
results and ensure long-term
functioning of the water softener.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Refill salt message
^ As soon as the F Insufficient salt
message is displayed, refill the salt
container
^ Confirm with the center button.
The "Insufficient salt" message goes
out.
If a sufficiently high concentration of
salt has not yet formed, the Insufficient
salt message may continue to be
displayed after adding the salt. In this
case, confirm again with the center
button.
^ Place the provided funnel over the
salt container and carefully fill it with
salt. The salt container holds
The Insufficient salt message is turned
off if you have programmed the
dishwasher to a water hardness below
4 °d (4 gr/gal).
approx. 4.4 lbs (2 kg) of salt,
depending on the type of salt.
^ Clean any excess salt from the
threads of the container opening.
Screw the lid on firmly.
If using"Tab" detergent products in
your dishwasher, the messages can
be turned off if desired (see
^ Immediately after each refill, run the
"Express" program without a load (no
"Turbo" function). This will remove
any traces of salt from inside the
wash cabinet.
"Settings - Deactivate indicators").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
replenish the salt and rinse aid and
to turn the indicators back on.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid
Rinse aid helps to prevent spotting on
dishes and glassware.
The rinse aid is filled in the reservoir
and the set amount will be
automatically dosed.
,Filling the rinse aid reservoir with
detergent (liquid or powder) will
damage the reservoir. Only pour
rinse aid formulated for residential
dishwashers into the reservoir.
^ Pour liquid rinse aid into the reservoir
until it is visible on the surface of the
screen.
When using "Tab" detergents rinse
aid is not needed.
The rinse aid reservoir holds
Adding rinse aid
approximately 3.7 fl. oz. (110 ml).
^ Press on the flap until you hear it
click shut. Failure to close it all the
way allows water to enter the
reservoir during the wash program.
^ Clean any spilled rinse aid. This
prevents over-foaming occurring
during the next program.
You can adjust the rinse aid dosage
for best results (see "Settings - Rinse
aid").
^ Press the button on the rinse aid
reservoir in the direction of the arrow
until the flap springs open.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid indicator
When the ( Refill rinse aid message
appears, the reservoir contains
sufficient rinse aid for 2 - 3 programs
only.
^ Add rinse aid once the program has
finished.
^ Confirm with the center button.
The "Refill rinse aid" message will go
out.
If using "Tab" detergent products in
your dishwasher, the messages can
be turned off if desired (see
"Settings - Deactivate indicators").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
replenish the salt and rinse aid and
to turn the indicators back on.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
^ The spray arms must not be blocked
by items that are too tall or hang
through the baskets. Check
clearance by manually rotating the
spray arms.
,Do not wash items soiled with
ash, sand, wax, grease or paint in
the dishwasher.
Ash and sand do not dissolve and
will be distributed throughout the
inside of the dishwasher.
^ Place very small items in the cutlery
tray or basket so they do not fall to
the bottom of the wash cabinet.
Wax, grease and paint will cause
permanent discoloration and
damage to the dishwasher.
^ Food residue and spilled liquids
should be cleaned from the sides of
the dishwasher door. These are
outside of the wash cabinet and are
not cleaned by water from the spray
arms.
^ Scrape food from dishes before
placing them in the dishwasher,
rinsing is not necessary.
^ Some foods contain natural dyes,
e.g. carrots or tomatoes. Plastic items
may discolor permanently if they
come in contact with food dyes.
^ All items can be placed anywhere in
the baskets.
^ Load dishes so that water can reach
all surfaces. Do not place dishes or
cutlery inside other pieces.
^ Make sure that all items are securely
positioned.
^ Hollow items such as cups and
glasses should be placed upside
down in the baskets.
^ To ensure good water coverage, tall,
narrow and hollow items, i.e. vases
or champagne glasses, should be
placed in the center of the basket
rather than in the corners.
^ Concave based items such as mugs
or bowls, should be placed at an
angle so that water does not pool.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Items not recommended for
dishwashing
Glassware:
– There are no standard guidelines for
washing glassware, when in doubt
wash by hand.
– Cutlery with wooden handles
– Wooden cutting boards
– When purchasing new dishes,
glasses and cutlery, make sure they
are dishwasher safe. Only wash
items marked "dishwasher safe" in
the dishwasher.
– Glued items such as old knives with
handles glued together around the
shank of the blade
– Handmade craft items, antique,
metal trimmed or decorative
glassware
– If fine glassware is washed in the
dishwasher select the "China &
Crystal" program*. This will reduce
the risk of clouding.
– Plastic items that are not heat
resistant
– Copper, brass, tin or aluminum
Silver and aluminum:
– Dishes with color painted over the
glaze. These dishes may fade over
time
– Silver or aluminum items may tarnish.
– Silverware previously cleaned with a
silver polish may be damp or spotted
at the end of a program where water
has adhered to the polish. This can
be rubbed off with a soft, dry cloth.
Silver that has been cleaned in an
immersion dip is usually dry at the
end of a program, but may tarnish.
– Fine glassware and crystal items
should only be washed using the
"China & Crystal" program*.
Otherwise clouding or etching may
occur after frequent washing.
– Cast iron pots and pans
– If left to dry, foods containing sulfur
can discolor silver. These include
egg yolk, onions, mayonnaise,
mustard, fish and marinades.
* depending on model
– Silverware may tarnish or pit if
washed next to stainless steel.
Leave space between these metals.
If unsure whether your china and
crystal are dishwasher safe, please
check with the manufacturer. The
China & Crystal program, although
extremely gentle and thorough can
cause the china and crystal to "wear"
if they are not dishwasher safe.
– Clean aluminum items, e.g. grease
filters, with domestic dishwasher
detergent only.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Typical load for 10 place settings
Upper basket
Lower basket
Cutlery tray
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Typical load for 16 place settings
Upper basket
Lower basket
Cutlery tray
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Upper basket
Foldable spikes
The rows of spikes can be lowered to
make more room for larger items, such
as casserole dishes.
,Always use the dishwasher with
the upper and lower basket inserted
(except during the Tall items
program, if available).
^ Press the yellow lever down a and
fold down the spikes b.
^ Load the upper basket with small,
lightweight, or delicate items such as
cups, saucers, glasses, dessert
bowls, etc.
Hinged cup rack
^ To make room for tall items, raise the
rack upwards.
Shallow pans can also be placed in
the upper basket.
Glasses can be arranged along the cup
rack to give them some support during
the program.
^ Long items such as soup ladles,
mixing spoons and long knives
should be placed lying down across
the front of the upper basket.
^ Lower the cup rack and lean the
glasses against it.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Jumbo cup rack
Universal support bar
(depending on model):
The support bar will hold tall glasses
The cup rack can be set at two different and stem ware securely.
widths so that it can also accommodate
large cups.
^ Fold the bar down and lean the
desired glasses against it.
^ Pull the cup rack upwards and click it
back into position at the required
width.
^ If desired, a section of the cutlery tray
can be removed to allow for even
taller glasses.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjusting the height:
You can set the support bar at two
different heights.
^ Pull the support bar upwards and
click it back into position at the
required height.
Use the low setting for small glasses
and tumblers.
Use the high setting for tall glasses and
stem ware.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjusting the upper basket
To adjust the upper basket downwards:
In order to gain more space for taller
items the upper basket can be adjusted
on three levels with 2 cm between each
level.
^ Pull up on the levers at the sides of
the upper basket.
^ Adjust the basket to the desired
height and then release the levers to
lock the basket in place.
The upper basket can also be set at an
angle with one side high and the other
side low. Make sure, however, that the
basket can slide smoothly in and out of
the cabinet.
Depending on the setting of the upper
basket, the following plate dimensions
can be accommodated.
Depending on the setting of the upper
basket, a variety of plate dimensions
can be accommodated.
^ Slide out the upper basket.
To adjust the upper basket upwards:
^ Lift the basket up until it clicks into
place.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Lower basket
Heavily soiled items
^ For larger and heavier items such as
plates, serving platters, saucepans,
bowls, etc.
Glasses, cups, small plates and
saucers can also be arranged in the
lower basket.
Dishwasher with cutlery tray
^ Place large platters and dishes in the
center of the lower basket.
Dishwasher with cutlery basket
When tilted, plates up to 13 3/4"
(35 cm) in diameter can be
accommodated.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Removable MultiComfort insert
Glass rack
The rear section of the lower basket is
used for cups, glasses, plates, pots
and pans.
^ The glass rack can be raised to make
more room for tall items.
^ Stem glassware, e. g. wine glasses,
champagne flutes or beer glasses,
can be leaned against the glass rack
or suspended from it.
You can remove the MultiComfort insert
to provide more space for larger items
such as pots and pans.
The height of the glass rack is
adjustable.
To remove the insert a
^ Press the yellow handle forwards and
^ Slide the glass rack to the desired
height until the catches click into
place at the top.
remove the insert.
To replace the insert b
^ Slide the hooks of the insert under
the struts of the lower basket.
^ Push down on the insert to snap it
into position.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Foldable spikes
(depending on model)
The spikes at the front are used for
plates, soup bowls, platters, desert
bowls, and saucers.
Both rows of spikes can be folded
down to create more room for larger
dishware, e. g. pots, pans and bowls.
^ Press the yellow lever down a and
fold down the spikes b.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Cutlery
Split cutlery tray
(depending on model)
Spoons with thick handles may have to
be placed as knives and forks with their
heads in the holders.
^ Arrange the cutlery as shown in the
cutlery tray.
For easier unloading cutlery should be
grouped in zones, one for knives, one
for forks, one for spoons, etc.
Spoon heads should be placed in
contact with at least one of the serrated
retainers on the base of the cutlery tray
to ensure that water runs off them
freely.
The upper spray arm must not be
blocked by tall cutlery items (e.g.
cake servers).
^ You can use the yellow slide to adjust
the height of the middle section of the
cutlery tray to make more room for
large items of cutlery.
The side sections of the tray can be
moved into the middle to accommodate
tall dishware items in the upper basket.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Cutlery basket
(depending on model)
The cutlery basket can be placed
anywhere on the front rows of spikes in
the lower basket.
^ Fit it onto the cutlery basket if
required.
^ To avoid risk of injury, knives and
forks should be placed with the
handles upwards in the basket.
However, cutlery placed handle
down in the basket will come out
cleaner and drier.
^ Place small items of cutlery in the
individual slots on three sides of the
cutlery basket.
^ Insert cutlery with the handles facing
downwards, and distribute them
evenly along the insert.
Cutlery insert for the cutlery basket
Use the insert supplied for heavily
soiled items of cutlery.
The insert separates the items so that
they can be reached better by the
spray jets.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Optional dishwasher accessories are available from your Miele dealer, Miele or
Mieleusa.com (depending on your model some may already be supplied with your
machine as standard).
If you would like to...
the following accessory will need
to be ordered...
...wash a Miele Cappuccinatore
...wash additional items of cutlery
...wash long-stemmed glassware
... a Cappuccinatore insert for the
upper basket.
... a cutlery basket for the lower
basket.
... a glassware rack for the lower
basket.
MieleCare Collection
Miele branded cleaning and care products, including dishwasher salt, detergent
and rinse aid, are available to order from your Miele dealer, Miele or the on-line
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Detergent
You can use powder, gel or tab
detergents. Follow the dosage
information on the detergent
packaging.
,Dishwasher detergents contain
irritant and corrosive ingredients.
Avoid inhaling or swallowing
dishwasher detergent.
If using a Tab detergent see "Settings -
Deactivate indicators".
Keep children away from detergent.
Keep detergent out of the reach of
children. Keep children away from
the dishwasher when the door is
open. There could still be detergent
residues in the dishwasher. Only
add detergent just before starting
the program and lock the door with
the child safety lock (depending on
model).
Detergent tabs are not recommended
for use with the program "Express"
(depending on model). The tabs may
not dissolve completely.
Dishwasher cleaning products are
available from MIele.
,Only use detergents formulated
for domestic dishwashers.
Use only the recommended amount
of detergent. Continued use of too
much detergent may cause machine
damage.
When using the "China & Crystal"
program (depending on model)
reduce the amount of detergent
used to at least ½ of the normal
dosage. Also make certain your
china and crystal are dishwasher
safe.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Adding detergent
^ Add detergent to the compartments
and close the container flap.
^ Use one tab or add powder or gel
detergent to compartment II and
close the flap.
^ Press the latch on the detergent
dispenser. The flap will spring open.
The flap is always open at the end of a
program.
^ If a Pre-rinse is desired, and
available for your chosen program,
add 1 teaspoon (5 ml) of detergent to
compartment I.
Compartment I holds a maximum of
2 teaspoons (10 ml),
compartment II holds a maximum of
3.5 tablespoons (50 ml) of detergent.
The horizontal marks in compartment II
indicate the levels of approximately 1 ¼
and 2 tablespoons (20 and 30 ml)
respectively. The marks indicate the
approximate fill level in ml when the
door is open in a horizontal position.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Turning on
Starting a program
^ Press the "Start / Stop" button.
The program starts.
^ Make sure the spray arms can rotate
freely.
^ Close the door.
If additional options are selected, the
^ Open the water supply, if it is closed. corresponding indicators will also light
up.
^ Press the K button to turn the
dishwasher on.
Cancel a program only in the first
few minutes.
The last program selected will appear
in the display and the appropriate
indicator light will come on.
Otherwise important program steps
(e.g. the water softening) may be
interrupted.
After a short while, the estimated
program duration for the program
selected will appear in the display.
Selecting a program
Choose your program according to the
type of load and soiling.
See the "Program Guide" for more
information.
^ Select the desired program with the
Program selection button.
The indicator light for the selected
program will come on.
Additional options can now be
selected, if desired (see "Additional
Options").
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Guide
Program
When to use
Program sequence
Pre-rinse
Main Interim rinse Final Drying
wash
rinse
1
X
2
1
X
2
Pots & Pans
For normally soiled pots &
pans with dried on food,
and heavily soiled dishware,
use 120% detergent
X
X
X
recommended.
Normal
Program for completely
washing a full load of
as required
X
X
X
X
normally soiled dishware
with the ability to adjust
energy and water
consumption based on the
soil load of the dishware.
China &
Crystal
For temperature sensitive
as
X
as required
X
X
glassware and lightly soiled requir-
dishware, use 50%
ed
detergent recommended.
SaniWash
Express
To sanitize dishware, e.g.
baby bottles, cutting boards
and preparation dishware.
X
X
X
X
X
X
X
"Quick program" for lightly
soiled dishware, e.g. party
dishware or to remove salt
traces from the wash cabinet
after refilling salt, not
X
suitable for detergent tabs.
Rinse & Hold
To rinse dishes when a
complete program is not
needed.
X
Usage:
Electrical - 0.01 - 1.23 kWh
Water - 1.1 - 5 gal (4 - 19 l)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Time display
Standby
Before the program starts, the time
display shows the running time of the
A few minutes after the last key is
pressed or at the end of the program
selected program in hours and minutes. the dishwasher will switch into Standby
During the running program the
remaining time is shown in the time
display.
mode to save energy. The display and
the indicators are turned off and only
the Start/Stop indicator light flashes
slowly.
Symbols will appear to indicate the
current stage of the program:
^ To turn the dishwasher back on press
K.
1
8
%
(
G
Pre-wash
Main wash
Interim rinse
Final rinse
Drying
If the dishwasher is not turned off after
the program ends, it will turn
completely off after a few minutes in
standby mode (see "Settings - Optimize
standby").
O
Finished
The time displayed may vary with the
same program. This can be due,
among other factors, to the water
temperature at each intake, the
reactivation process, the type of
detergent, the load size and soiling.
If refill salt and/or rinse aid or a fault
are present in the display, the
dishwasher will not turn off.
The refill messages can be turned
off when you use a tab detergent
(see "Settings-Refill display").
Fault messages cannot be turned
off.
When a program is selected for the first
time, the display shows an average
time for a cold water intake.
Each time a program is run, the
electronic unit adjusts the program
running time according to the intake
water temperature and the load size.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
At the end of a program
Preparing your appliance for
an extended vacation
At the end of a program the display
shows End.
If you elect to turn off the water to your
home for an extended period of time,
please note that this may not be
In the "Express" program, the drying
fan will run for a few minutes after
the program is completed.
enough to reduce the risk of a leak.
To be completely safe, you must
turn off the water supply to each
individual appliance. This means
under the sink for a dishwasher, at
the laundry bib for your washer, etc.
Dishes tends to chip if removed still hot
from the dishwasher.
Let the dishware cool.
To avoid steam damage to the
counter top, open the door after the
the end of the program either fully or
keep it closed until you are removing
all the dishes.
^ Unload the dishwasher.
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending on
model) from dropping onto dishes in
the lower basket.
^ Press the K button to turn the
dishwasher off.
The dishwasher continues to use
electricity until turned off with the s
button.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Interrupting a program
Changing a program
A program is interrupted as soon as the
door is opened.
If the detergent dispenser flap is
already open, do not change the
program.
If the door is closed again, the program
will continue from where it was
interrupted.
If a program has already started and
you wish to change it:
,Water in the dishwasher is hot.
Danger of scalding.
^ Press the "Start / Stop" button for at
least one second.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it ajar
for approx. 20 seconds. This will
enable the temperature in the wash
cabinet to settle. Close the door
firmly until it clicks into place.
The program is canceled.
^ Select and start the desired program.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Intensive lower basket
Turbo
The "Intensive lower basket" option
The "Turbo" function can be used to
reduce the program run-times, in
allows you to wash heavily soiled items
in the lower basket while washing more programs in which the option is
delicate items in the upper basket.
available.
Cleaning performance in the lower
In order to achieve optimum cleaning
basket is intensified in programs where results, energy consumption rates are
this function is available.
Depending on the program, this can
mean that the running time varies
slightly.
increased when Turbo has been
selected.
^ Press the K button to turn the
dishwasher on.
^ Press the K button to turn the
dishwasher on.
The "Start / Stop" indicator light flashes.
^ Select a program.
The "Start / Stop" indicator light flashes.
^ Press the Turbo button.
^ Select a program.
The Turbo indicator light will come on if
the function is available for the program
which has been selected.
^ Press the "Intensive lower basket"
button.
The Intensive lower basket indicator
light will come on if the function is
available for the program which has
been selected.
^ Start the program with the "Start /
Stop" button.
Once selected, the function will remain
active for all programs until the setting
is changed.
^ Start the program with the "Start /
Stop" button.
Once set, the function will remain active
for the program selected until the
setting is changed.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Delay start
If, after you have set the delay start
time, you do not press the Start / Stop
button within a few seconds, the
display will revert to showing the
program duration. You will have to enter
the delay start time again.
The start time of a program can be
delayed from 30 minutes to 24 hours.
The delay is set in 30 minute
increments.
When using the "Delay Start"
function, make sure that the
detergent compartment is dry before
adding detergent. Wipe dry with a
cloth if necessary. Otherwise the
detergent could stick together and
not completely rinse out.
The time will count down to the
program start in 1-minute steps.
Once the delay start time has elapsed,
the selected program starts. The
display shows the remaining time, the
indicator "Delay start" goes out and the
"Start / Stop" indicator light comes on.
Do not use liquid detergent. The
detergent could leak out of the
compartment.
,To prevent children from coming
into contact with the detergent:
Only add detergent just before
starting the program, i. e. before you
press the Start / Stop button, and
lock the door with the child safety
lock.
^ Press the K button to turn the
dishwasher on.
The "Start / Stop" indicator light flashes.
^ Select the desired program with the
"Program" button.
Starting a program before the Delay
start has elapsed:
^ Press the "Delay start" button.
The last delay start time will show in the
time display. The "Delay start" indicator
light comes on.
A program can be started before the
Delay start time has elapsed.
^ Press the "Start / Stop" button for at
^ Set the desired delay start time with
least one second.
the "Delay start" button.
The "Delay start" indicator light goes out
and the "Start / Stop" indicator light
flashes.
If you press and hold the "Delay start"
button, the time will automatically count
up to 24:00 h. To start again at 30
minutes, press the "Delay start" button
twice.
^ Press the "Start / Stop" button again.
The program starts. The "Start / Stop"
indicator light comes on.
^ Press the "Start / Stop" button.
The "Start / Stop" indicator light comes
on.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
The "Settings" menu allows
you to change standard
settings
Language
!
The display contents can be shown in
different languages.
The displayed language can be
Opening the "Settings" menu
changed in the Language !.
^ Press the K button to turn the
dishwasher off.
^ Select the desired language and
confirm with the center button.
^ Press and hold the "Start / Stop"
The flag after the word Language
serves as a guide when an
unfamiliar language has been
selected.
button.
^ Turn the dishwasher on with the K
button and hold the "Start / Stop"
button down for a few seconds.
Select the menu option with a flag
until the Language !.submenu is
displayed.
The first option of the Settings menu will
appear in the display and all the
indicator lights will come on.
See the "Display Functions" section for
details.
^ Select the menu option you wish to
change.
The selected options are marked
with a check (.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Water hardness
Value to
Your dishwasher is fitted with a water
softener that needs to be programmed
to the water hardness level in your area.
°d
gr/gal
set
in the display
1
2
1
2
1
2
– The dishwasher must be correctly
programmed to match the hardness
of your water.
3
3
3
4
4
4
5
5
5
6
6
6
– Your local water authority will be able
to advise you of the exact water
hardness level in your area.
7
7
7
8
8
8
9
9
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37-50
51-60
61-70
10
11
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
38
39-52
53-63
64-73
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37-50
51-60
61-70
– In areas where the water hardness
fluctuates (e. g. 37 - 50 °d
[39 - 52 gr/gal]) always program the
machine to the higher value (in this
example 50 °d [52 gr/gal]).
A check ( will appear beside the
water hardness which has been set.
^ Select the hardness of your water
supply and confirm with the center
button.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Rinse aid
Optimize standby
For best results the rinse aid dosage
can be adjusted.
A few minutes after the last key is
pressed or at the end of the program
The dosage can be set between 0-6 ml. the dishwasher will switch into Standby
The factory default dosage setting is
3 ml rinse aid.
mode to save energy. The display and
the indicators are turned off and only
the Start/Stop indicator light flashes
slowly.
The amount of rinse aid dispensed may
be more than the value set due to the
automatic adjustment of the "Sensor
Wash" program.
If the dishwasher is not turned off after
the program ends, it will turn
completely off after a few minutes in
Standby mode.
If spots appear on the dishes:
– Use a higher setting for rinse aid.
This function can also be turned off.
The display and the indicators stay on
and the dishwasher will turn off after
approx. 6 hours.
If smearing or streaking show:
– Use a lower setting for rinse aid.
^ Select the desired rinse aid amount
and confirm with the center button.
^ Select the desired setting and press
the center button.
If refill salt and/or rinse aid or a fault
are present in the display, the
dishwasher will not turn off.
The refill messages can be turned
off when you use a tab detergent
(see "Settings-Refill indicators").
Fault messages cannot be turned
off.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Refill indicators
Pre-rinse
If you consistently use "Tab" detergent
products in your dishwasher, you can
You can use this function in the
selected program to remove easily
switch the Salt and Rinse Aid indicators loosened food residues. It is not
off if desired.
available for every program.
^ Select the desired setting and
^ Select the desired setting and
confirm with the center button.
confirm with the center button.
Once set, the function will remain active
for the programs for which it is
If you switch to using a detergent
that does not contain salt or rinse
aid, remember to replenish the salt
and rinse aid and turn the indicators
back on.
available, until the setting is changed.
Extended drying
The fan runs longer at the end of a
program to improve the drying result.
This function is not available for every
program.
Soak
You can use the Soak function in the
program selected for loosening very
stubborn food residues. It is not
available for every program.
^ Select the desired setting and
confirm with the center button.
If you are using powder dishwasher
detergent, add approx. 1 teaspoon
(5 g) to compartment I.
Once set, the function will remain active
for the programs for which it is
available, until the setting is changed.
^ Select the desired setting and
confirm with the center button.
Brightness
Once set, the function will remain active
for the programs for which it is
There are seven different display
brightness settings.
available, until the setting is changed.
^ Select the desired brightness and
confirm with the center button.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Contrast
Turning the demo mode on
There are seven different display
contrast settings.
^ Select the desired option.
^ Select the option On and confirm with
^ Select the desired contrast and
the center button.
confirm with the center button.
^ Close the Settings menu.
^ Press the Start / Stop button.
Demo mode will begin.
Filter check
This selection allows you to set the
number of cycles run before the filter
check message shows.
Turning the demo mode off
You can select between 30 and 60
cycles.
Demo mode will turn off automatically
when it reaches the end of the cycle.
The "Filter check" message is set by
default to 50 cycles.
Factory default
^ Select the desired interval and
If you have altered any settings from
the factory default, you can reset them
to the factory default settings.
confirm with the center button.
Showroom program
^ Select Reset and confirm with the
center button.
Only for showrooms.
Leaving the Settings menu
The dishwasher has a demo program
for dealer's showrooms.
Use Close to leave the Settings menu.
– Demo with wash sound:
^ Select Close and confirm with the
The program activates the pumps to
demonstrate the wash sound.
center button.
The display will then show the last
program selected and the indicator
light for the program selected will come
on.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently Asked Questions
,Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem
Possible fault
Solution
After the dishwasher
The machine is not
Insert the plug.
was turned on with the plugged in.
K button, the display
The circuit breaker has
Reset the circuit breaker.
See the data plate for
minimum amperage.
stays off and the "Start
/ Stop" indicator does
not flash.
tripped.
The dishwasher stops The circuit breaker has
during a program. tripped.
– Reset the circuit breaker.
See the data plate for
minimum amperage.
– If the circuit breaker trips
again. Contact Miele.
One of the following faults appears on the
display:
Before fixing the fault:
– Press the K button to
turn the dishwasher off.
;
Fault FXX
There may be a technical After a few seconds:
fault.
– Turn the dishwasher on.
– Select the desired
program.
– Press the Start / Stop
button.
If the fault is indicated
again, a technical fault has
occurred.
– Contact Miele.
L Waterproof
The waterproof system
has activated.
– Turn off the water supply.
– Contact Miele.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently Asked Questions
Faults in the water intake/water drain
Problem
Possible fault
Solution
One of the following
faults appears on the
display:
Before fixing the fault:
– Press the K button to turn
the dishwasher off.
2 Open water supply
The water supply valve Open the water supply valve all
is closed.
the way.
2 Water intake
Before fixing the fault:
– Press the K button to turn
the dishwasher off.
Fault in the water
intake.
– Open the water supply all
the way and restart the
program.
– Clean the water intake filter
(see "Cleaning and Care").
– The water pressure at the
water connection is less than
30kPa (0.3 bar/4.35 psi).
Consult a plumber.
2 Drain
Fault in the water drain. – Clean the triple filter (see
There might be water in
the wash cabinet.
"Cleaning and care").
– Clean the drain pump (see
"Cleaning and Care").
– Clean the non-return valve
(see "Cleaning and Care").
– Remove any kinks in the
drain hose.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently Asked Questions
General problems with the dishwasher
Problem
Possible fault
Solution
The indicators and the The indicators and the Press the K button to come
display is dark. Only
the "Start/Stop"
indicator flashes
slowly.
display turn off
out of Standby mode.
automatically to save
energy (Standby).
Detergent residue is left The dispenser was
Dry the dispenser before
in the dispenser at the damp when detergent adding detergent.
end of a program.
The detergent
was added.
Detergent residue is
Remove the residue.
dispenser lid cannot be blocking the catch.
closed properly.
The door and the
interior walls are still
wet after a program has operating mode of the
This is not a fault.
It is the normal
The moisture will evaporate
after a short time.
finished.
drying system.
Water remains in the
wash cabinet at the end
of a program.
Before fixing the fault:
– Press the K button to turn
the dishwasher off.
The triple filter in the
wash cabinet is
clogged.
Clean the triple filter (see
"Cleaning and care").
The drain pump or the Clean the drain pump and
non-return valve may
be blocked.
the non-return valve (see
"Cleaning and care".
The drain hose is
kinked.
Remove any kinks from the
drain hose.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently Asked Questions
Sounds
Problem
Possible fault
The spray arm is hitting an Interrupt the program,
item in the basket. rearrange items blocking
the spray arms.
Items are not secure in the Interrupt the program, and
Solution
There is a knocking
noise in the wash
cabinet
There is a rattling
noise in the wash
cabinet
wash cabinet.
rearrange loose pieces.
A foreign object has
become lodged in the
drain pump.
Remove the foreign object
from the drain pump (see
"Cleaning the drain pump
and non-return valve")
There is a knocking
This may be caused by
This has no effect on the
dishwasher. If in doubt,
contact a plumber.
noise in the water line the installation or the
diameter of the pipe.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently Asked Questions
Poor cleaning results
Problem
Possible fault
Solution
The dishes are not The dishes were not
See "Loading the
dishwasher".
clean.
loaded correctly.
The program was not
powerful enough.
Select a more intensive
program (see "Program
Guide").
Stubborn but normal
Use the function "Adjust
Sensor Wash" (depending on
model, see "Settings").
soiling (e.g. coffee, tea).
Not enough detergent was Use more detergent, or
dispensed.
change the detergent.
The spray arms are
blocked.
Turn the spray arms and
rearrange the dishes if
necessary.
The triple filter in the wash Clean the filter and insert it
cabinet is clogged or not correctly. Clean the spray
correctly inserted. arm jets, if required (see
The spray arm jets might "Cleaning and care").
be clogged as a result.
The non-return valve is
Clean the drain pump and the
stuck open and blocked. non-return valve (see
Wash water will run back "Cleaning and care").
into the wash cabinet.
Glasses and cutlery The rinse aid dosage is
Reduce the dosage (see
"Settings - Rinse aid").
show streaks. The
glasses take on a
bluish shimmer; the
deposits can be
wiped off.
set too high.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently Asked Questions
Problem
Possible fault
Solution
Dishes are not dry, The rinse aid setting may be Increase the dosage, refill
glasses and
cutlery are
spotted.
too low, or the rinse aid
reservoir is empty.
the reservoir or switch the
rinse aid product when
refilling (see "Rinse aid").
Dishes were taken out too
soon.
Leave dishes in longer (see
"Use").
A "Tab" product was used.
Change the detergent, or
These products have a low refill the rinse aid (see "Rinse
drying effect.
aid").
White residue is
Not enough rinse aid was
Increase the dosage (see
"Setting the rinse aid
dosage").
visible on cutlery used.
and dishes.
Clouding occurs
The salt container is empty. Refill the salt container (see
"Filling the salt container").
on glassware and
cutlery; film can be
wiped off.
The salt container lid was not Reseat it making sure it
screwed on properly.
screws back on correctly.
Unsuitable "Tab" products
were used.
Use a different detergent.
Use normal (powder or gel)
detergent.
The water softener is
programmed on too low a
setting.
Program a higher water
softener setting (see "Water
softener").
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently Asked Questions
Problem
Possible fault
Detergent deposits.
Solution
Glasses have a
Change detergent right
away.
brown or blue
discoloration; film
cannot be wiped off.
Glasses are dull and Glasses are not dishwasher There is no remedy.
discolored; film
safe. The surface is
Only use dishwasher safe
glasses.
cannot be wiped off. affected.
Tea or lipstick stains The wash temperature of
Select a program with a
have not been
completely removed. too low.
The detergent has a low
the selected program was higher wash temperature.
Use a different detergent.
bleaching effect.
Plastics are
discolored.
Natural dyes e.g. from
carrots, tomatoes or
Use more detergent (see
"Detergent").
ketchup may be the cause. Discoloration is permanent.
Not enough detergent was
used to break down natural
dyes.
There are rust stains The affected items are not There is no remedy.
on cutlery.
corrosion resistant.
Use only dishwasher safe
cutlery.
No program was run after
refilling salt. Salt residuals
got in the wash cycle.
Start the "Express" program
without a load after refilling
salt (without the "Turbo"
option).
The salt container lid was
not screwed on properly.
Reseat it making sure it
screws back on correctly.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
Repairs
MieleCare
In the event of a fault which you cannot
correct yourself please contact the
Miele Service Department at the phone
number on the back of this booklet.
(USA only)
MieleCare, our Extended Service
Contract program, gives you the
assurance of knowing that your
^ Please quote the model type and
appliance investment is covered by
5 years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
number of your appliance.
These can be found on the data plate
along the right edge of the door.
PC Update
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
Please note that unless expressly
approved in writing by Miele’s Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
When, for example, technological
developments offer advanced
modifications to your existing program
cycles a service technician will be able
to input these into your machine
controls via the indicator light marked
PC. Miele will provide information when
such possibilities become available.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Transport
To transport the dishwasher, e.g. when
moving to a new home, note the
following:
– Empty the dishwasher.
– Secure any loose parts, e.g. hoses,
cables, cutlery baskets.
– Transport the dishwasher in the
upright position. If unavoidable it
may be transported on its back. Do
not transport it on its side or on the
door. Residual water in the machine
could leak and cause electrical
damage.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
User Maintenance Instructions
To prevent accidents
and appliance damage,
read these instructions
before
installation or use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Exterior
Check and clean your dishwasher
regularly. This will help avoid
problems and faults.
^ Only use a conditioner suitable for
your kitchen cabinetry.
^ Clean wood only with a damp cloth
and wipe dry.
,Abrasive cleaning agents,
all-purpose cleaners, thinner or
ammonia based cleaners should not
be used on the dishwasher.
Clean the exterior with a solution of
warm water and liquid soap applied
with a soft sponge. Dry with a soft
cloth.
They will damage the surface.
Wash cabinet
Glass cleaners may be used to
clean the exterior. However do not
allow them to sit or "puddle", this can
cause damage to the surface.
Remove the cleaner promptly.
Generally, the wash cabinet is self
cleaning if the correct amount of
detergent is used.
The wash cabinet can be cleaned with
a dishwasher cleaner such as "Dis
Cleaner" available from your Miele
To better maintain your appliance
avoid the following:
– cleaners containing soda, ammonia,
thinners, or chlorides
Door and the door seal
^ Wipe the door seals regularly with a
– cleaners containing descaling
agents or lime removers,
damp cloth to remove food deposits.
^ Food residue and spilled liquids
should be wiped from the sides of the
dishwasher door. These are outside of
the wash cabinet and are not cleaned
by water from the spray arms.
– abrasive cleaners,
– stainless steel cleaners,
– dishwasher soap (powder),
– caustic (oven) cleaners,
– scouring pads, steel wool, hard
brushes,
Control panel
^ The plastic control panel should only
be wiped with a damp cloth or
suitable cleaning agent designed for
use on plastic.
– metal scrapers,
– steam cleaning products.
, The appliance front and controls
are not scratch proof.
Remove spills immediately.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Triple filter system
Cleaning the triple filter
The triple filter system in the base of the ^ Turn the dishwasher off.
wash cabinet retains coarse dirt from
the suds solution, preventing it from
reaching the circulation system and
re-entering the cabinet through the
spray arms.
,The dishwasher must not be
used without all the filters in place.
Collection of coarse dirt may cause the
filters to clog. The level of soiling and
time it takes before the filters need
cleaning will vary depending on your
household use.
^ Turn the handle counter-clockwise to
The message Check filters will appear
in the display after every 50 program
cycles (factory default setting).
release the triple filter system a.
^ Remove the triple filter system from
the machine b. Clean any solid
particles and rinse the filter well
under running water. Scrub with a
nylon brush if necessary.
The filter check frequency can be set
from 30 and 60 program cycles (see
"Settings, filter check").
^ Check the triple filter system.
,Make sure that when cleaning
the filters, no coarse dirt falls into the
circulation system, causing a
blockage.
^ Clean the triple filter, if necessary.
^ Confirm the message with the center
button.
The display changes to the Main menu.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
To clean the inside of the filter, the flap
must be opened:
^ Replace the triple filter so it lies flat in
the base of the wash cabinet.
^ Push the clips together in the
direction of the arrows as shown, a
and open the flap b.
^ Lock the filter by turning the handle
clockwise, until the arrows point to
each other.
^ Rinse all parts under running water.
,The triple filter system must be
inserted correctly and locked.
Otherwise large particles could get
into the circulation system and
cause a blockage.
^ Close the flap so that the clip
engages.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the spray arms
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
^ Turn off the dishwasher before
cleaning.
Removing the spray arms
^ Remove the cutlery tray (if present).
^ Push the upper spray arm up to
engage the inner ratchet and
unscrew the spray arm.
^ Pull the lower spray arm firmly
upwards to remove.
^ Lift up the middle spray arm, a, to
engage the ratchet and unscrew the
spray arm, b.
^ Use a pointed object such as a
toothpick to push food particles into
the spray arm jets.
^ Remove the lower basket.
^ Rinse thoroughly under running
water.
^ Return the spray arms and check that
they rotate freely.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
^ Turn off the dishwasher and pull the
plug.
^ Remove the triple filter (see "Triple
filter system").
^ Use a cup or bowl to scoop water out
of the wash cabinet.
The drain pump is beneath the
non-return valve (see arrow).
^ Remove all foreign objects from the
drain pump (glass or bone splinters).
^ Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
^ Carefully reinsert the non-return valve
and secure it with the locking clamp.
,Make sure the locking clamp
clicks into place!
^ Tilt the locking clamp to the side a.
^ Pull out the non-return valve b and
rinse it under running water.
^ Remove all foreign objects from the
non-return valve.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
Please refer to the Installation Diagram supplied with these instructions.
To comply with IEC sound testing protocols, please contact Miele for additional
instructions.
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Help to protect the environment
Disposal of the packing
material
Disposal of an old machine
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
The cardboard box and packaging
protect the appliance during shipping.
These materials are biodegradable and
recyclable. Please recycle.
Ensure that the appliance presents no
danger to children while being stored
for disposal. Before discarding an old
appliance, unplug it from the outlet, cut
off its power cord and remove any
doors to prevent hazards.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
,Installation, repairs and other
work by unqualified persons could
be dangerous.
,Improper connection of the
equipment grounding conductor
can result in electric shock. Do
not modify the plug provided with
the appliance; if it will not fit the
outlet, have a proper outlet
Check that the voltage, frequency
and fuse rating shown on the data
plate match the household mains
supply.
installed by a qualified electrician.
If there is any question
concerning the proper electrical
connection or grounding of this
appliance to the power supply,
please consult a licensed
The power outlet must be accessible
after installation. Do not use an
extension cord to connect the
dishwasher to the mains. Danger of
overheating! See data plate on the
right side of the door.
electrician or call Miele’s
Technical Service Department:
U 1-800-999-1360
A damaged power cord must only
be replaced with a genuine Miele
cord by a Miele service technician
or a qualified technician.
V 1-800-565-6435
Specifications
The dishwasher comes equipped with a
4 ft (1.2 m) power cord with a molded
plug for connection to 120 V, 60 Hz,
15 A grounded receptacle.
GROUNDING INSTRUCTIONS
THIS APPLIANCE MUST BE
GROUNDED.
In the event of a malfunction or
breakdown, grounding will reduce the
risk of electric shock by providing a
path of least resistance for the electrical
current. This appliance is equipped
with a cord having an equipment
grounding conductor and a grounding
plug. The plug must be plugged into an
appropriate outlet that is installed and
grounded in accordance with all local
codes and ordinances.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Hardwired electrical connection
,Prior to making a hardwire
connection to the terminal, remove
the power cord. Otherwise there will
be a risk of electric shock from the
attached plug.
It is possible to hardwire this appliance
to an existing power cable.
,CAUTION: Before servicing,
disconnect the power supply by
either removing the fuse, shutting off
the power main or manually
An existing flexible supply cord or
cable shall have a minimum thickness
of AWG 14.
"tripping" the circuit breaker.
120 V, 60 Hz, 15 A fuse rating
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous and
the manufacturer cannot be held
responsible.
Black wire (live):
connect to L
White wire (neutral): connect to N
Green wire (ground): connect to -
Before connecting the appliance to
the power supply, make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
GROUNDING INSTRUCTIONS
THIS APPLIANCE MUST BE
GROUNDED.
,After attaching the permanent
power supply cord, check that all
screws on the terminal block and the
strain relief are tightened.
This appliance must be connected to a
grounded metal, permanent wiring
system, or an equipment-grounding
conductor must be run with the circuit
conductors and connected to the
equipment-grounding terminal or lead
on the appliance.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Connection to the water supply
If not connected directly to a water
supply valve, an appropriate
,Installation, repairs and other work
by unqualified persons could be
dangerous.
adapter (not included) is required.
– Water pressure: Must be between
4.5 - 145 psi (0.3 - 10 bar).
,Do not drink water from the
dishwasher!
– If the water pressure if lower, a
"Water Intake" notification will be
shown. See "Frequently Asked
Questions" for more information.
– The dishwasher can heat its own water
to the temperature required by the
wash program. This allows for
connection of the machine to either a
hot (max. 140°F / 60°C) or cold water
source.
– If the water pressure is higher than
shown, a pressure reducing valve
must be used.
Ensure that the water connection is
secure after the first use.
For lowest energy consumption and for
fastest possible wash times connect
the dishwasher to a hot water source.
All programs use hot water in the rinse
cycles.
,To prevent damage to the
dishwasher, it must only be
connected to a fully vented drainage
system.
– To use the "Energy Saver" program, a
hot water connection of minimum
115°F / 45°C and maximum 140°F /
60°C (water intake temperature) is
necessary.
,Do not cut the intake hose. If the
hose is cut, the dishwasher will not
work. There will be a water leak. If
the hose is too long, coil it neatly
and place it behind or under the
machine.
The higher the water intake
temperature, the better the cleaning
and drying results.
– The inlet hose is approximately 5 ft.
(1.5 m) long.
– The water inlet hose comes
equipped with an inlet hose ending
with a 3/8" female compression
fitting. This can be directly
connected to a water supply valve or
to an appropriate coupling.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Drainage
– The drain hose must not be
shortened.
– The machine comes equipped with a
built-in non-return valve on the
discharge side to prevent waste
water from flowing back into the
dishwasher.
,Make sure the hose is not kinked
or cut when pushing the machine
under the countertop.
– The dishwasher is equipped with a
5 ft (1.5 m) flexible drain hose with an
internal diameter of 7/8" (22 mm).
Venting the drainage system
If the dishwasher drain hose is
connected to a floor drain or to a drain
pipe that is less than 8" (20 cm) above
the floor, the drain must be vented.
Otherwise the water inside the
dishwasher may siphon out during the
wash program.
– Drain hose extensions and adapters
can be ordered from Miele.
The maximum drain hose length is
13 ft. (4 m), max. drain height: 39"
(1 m).
– Use the clamp provided to attach the ^ Open the dishwasher door and
hose to the dishwashers P trap or
disposal connection (see the
"Installation Diagram").
remove the lower basket.
The hose must always be attached
on the sink side of the P trap.
When attaching the hose to a
garbage disposal fitting, make sure
the plug which is normally blocking
the fitting is knocked out or
removed.
– The hose can be angled to the left or
right side at the rear of the machine.
^ Pull the lower spray arm firmly
– The existing nipple that the drain
hose is connected to may be
upwards to remove.
^ Cut off the vent cap located at the
right rear of the triple filter system, as
illustrated.
designed for various hose diameters.
If the nipple diameter is to large or to
small it should be replaced or an
adapter may be used. If the nipple
extends more than 2" (50 mm) into
the drain hose it should be
shortened, or the hose could clog.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 1511
G5500/G5505/G5510/G5515 /
M.-Nr. 09 016 330 / 02
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|