Operating and Installation
Instructions
Ceramic Combiset
CS 1112
CS 1122
en - US
To prevent accidents and
appliance damage,
read these instructions
before
installation or use.
M.-Nr. 07 346 400
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Only use the combiset for residential
~
WARNING- When using your gas
cooking, and for the purposes
described in this manual.
Other uses are not permitted and can
be dangerous.
appliance follow basic
precautions, including the
following:
Persons who lack physical, sensory
~
This gas combiset conforms to all
uniform safety codes and
regulations.
or mental abilities, or experience with
the appliance should not use it without
supervision or instruction by a
responsible person.
Read all instructions before
installation or use to prevent
injury and appliance damage.
Children
Children should not be left
~
These instructions contain
important information on
unattended in an area where the
appliance is in use. Never allow
children to sit or stand on any part of
the appliance.
installation, safety, use and
maintenance of this appliance.
They will help you avoid injury
and damage to the appliance.
Caution: Do not store items of interest
to children in cabinets above the
appliance. Children climbing on the
appliance to reach these items could
be injured.
Keep these operating instructions
in a safe place and pass them on
to any future user.
The appliance is hot during use and
~
remains so for some time after being
switched off. Keep children away from
the appliance.
SAVE THESE INSTRUCTIONS
Correct usage
Ensure that any packing material, is
~
This appliance is not designed for
~
disposed of safely and kept out of the
reach of children. Danger of
suffocation!
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as:
Keep all pots and pans out of the
~
reach of children. Danger of burning or
scalding.
– shops, offices and similar work
environments,
– by customers in hotels, motels, Bed
& Breakfasts or similar residential
environments.
This appliance is not intended for
outdoor use.
~
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Technical safety
Before servicing, disconnect the
appliance from the main power supply.
~
Installation, repair and maintenance
~
work should be performed by a Miele
authorized service technician. Work by
unqualified persons could be
Do not operate any appliance with a
~
damaged cord or plug, or if the
appliance has been damaged in any
manner. Contact Miele’s Technical Ser-
vice Department.
dangerous and may void the warranty.
Be sure your appliance is properly
~
installed and grounded by a qualified
technician.
Under no circumstances open the
~
outer casing of the appliance.
Before installing the combiset,
check for externally visible damage.
Do not operate a damaged appliance.
While the appliance is under
~
~
warranty repairs should only be
performed by an authorized service
technician. Otherwise the warranty is
void.
To guarantee the electrical safety of
~
this appliance, continuity must exist
between the appliance and an effective
grounding system. It is imperative that
this basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified electrician.
In the event of any damage to the
~
appliance, it must be turned off immedi-
ately and disconnected from the main
power supply. Contact Miele’s
Technical Service Department.
Do not use the appliance until it has
been repaired. Ensure power is not
supplied to the appliance until repair
work is completed.
Before installation, make sure that
~
the voltage and frequency listed on the
rating label correspond with the
household electrical supply. This data
must correspond to prevent injury and
appliance damage. Consult a qualified
electrician if in doubt.
Defective components should be
~
replaced by Miele original spare parts
only. Only with these parts can the
manufacturer guarantee the safety of
the appliance.
The combiset is not designed for
~
use with an external timer or a remote
control system.
Do not cook on a broken combiset.
~
Any breakages or cracks in the ceramic
surface of the appliance are defects
and must be treated as such. If the
combiset should break, cleaning
solutions and spills may penetrate the
broken combiset and create a risk of
electric shock. Do not use the
Do not use an extension cord to
~
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance.
Install the appliance so that the
~
power cord does not come into contact appliance until it has been repaired.
with any portion of the combiset which
may become hot during use.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Be sure that the power cord does Never use the appliance to heat a
not come in contact with any "hot spots" room. Due to the high temperatures
~
~
after installation.
radiated, objects left near the appliance
could catch fire.
Safety
Do not use the appliance until it has
been properly installed in the
countertop.
~
DO NOT TOUCH THE COOKING
~
AREA OR THE VICINITY AROUND THE
COOKING AREA - During operation,
the cooking area and its surroundings
will get hot and can cause burns. When
the combiset is shut off, the surface
may remain hot enough to cause harm
although the glow is not visible through
the dark glass. During and after use, do
not touch or let clothing or other
Do not store items on the appliance
~
when not in use. Items could melt or
catch fire from residual heat or if the
appliance is turned on inadvertently.
Always switch the cooking zone(s) off
after use.
Never cover the burner with a cloth
~
or protective oven foil. If inadvertently
turned on or if there is residual heat, a
fire could result.
flammable materials contact the
cooking area or the vicinity around the
cooking area until they have had
sufficient time to cool. As long as the
surface temperature is high enough to
cause a burn, the Residual Heat
Indicator will remain lit. Once sufficient
time has passed the indicator will go
out and the surface is safe to touch.
When more than one combiset is
~
installed next to each other, be sure not
to place hot pots or pans on the center
line. This could damage the seal.
Be aware of loose fitting or hanging
~
garments when operating the
appliance, they may present a fire
hazard.
Protect your hands with oven mitts
~
or potholders when using the
appliance. Use only dry, heat resistant
potholders. Moist or damp potholders
used on hot surfaces can result in
steam burns. Do not let the potholder
touch the hot heating elements. Do not
use towels or other bulky items near the
appliance.
Never leave an appliance
~
unattended at high settings or when
cooking with oil or fat. Overheated oil
could ignite. Always heat oil slowly,
monitoring it as it heats.
Do not store aerosols, combustibles
~
or any other easily flammable materials
underneath or adjacent to the
appliance.
Do not heat unopened containers.
Built-up pressure may cause the
~
container to burst and result in injury.
Do not use water on grease fires.
~
Do not flambé under an exhaust
~
Smother or use a dry chemical or
foam-type extinguisher on any fire or
flame.
hood. Flames could be drawn up into
the hood by the suction and the grease
filters may ignite.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Make certain that the power cords of
Before using glass, glass/ceramic,
ceramic, earthenware or other glazed
cookware verify that they can be used
on a cooking surface.
~
~
small appliances do not come in
contact with the appliance. The
insulation of the cable could become
damaged. Danger of electric shock!
To prevent burns and breathing
~
Be careful not to drop anything on
difficulty, allow the combiset to cool
before cleaning. Some cleaners may
produce toxic fumes if applied to a hot
surface.
~
the ceramic surface of the combiset.
Even lightweight objects may cause
damage.
Use the proper pan size. Select
~
cookware with flat bottoms large
Keep the combiset clean. Salt,
~
sugar, and grit can cause scratches.
enough to cover the heating element.
Using undersized cookware will expose
a portion of the heating element and
may result in ignition of clothing or
handles becoming hot. The proper size
pot or pan will also improve efficiency.
When wiping spills on a hot
combiset with a wet sponge or cloth, be
careful to avoid steam burns.
~
Do not let flammable materials,
~
i.e. cooking grease, accumulate on the
appliance.
Pot and pan handles should be
~
turned inward and not extend over the
countertop to reduce the risk of burns,
ignition of flammable materials, and
spills.
Do not use a steam cleaner to clean
~
this appliance. Steam could penetrate
electrical components and cause a
short circuit.
Do not use pots or pans with
~
pronounced edges or ridges on the
Do not allow either solid or liquid
~
sugar, pieces of plastic or foil to fall on
ceramic combiset. These could scratch the burners when they are hot. If these
residues are allowed to cool on the
ceramic surface pitting or even
the combiset permanently. See
"Selecting cookware" for more
information. Grains of salt and sand can cracking may occur.
cause scratches. Make sure that the
Any spills should be removed as
quickly as possible to prevent them
from burning on and becoming difficult
to remove.
~
bases of any pots and pans are clean,
free of any fat or oils and are dry.
To prevent damage to the combiset
~
do not use pots and pans with thin
bases on the combiset. Never heat an
empty pan unless the pan manufacturer
states that you can do so.
SAVE THESE INSTRUCTIONS
AND REVIEW THEM
PERIODICALLY
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the combiset
CS 1112
aVariable burner :
C 4" or 7" (100 mm or 180 mm) -
Power: 700 W or 1800 W
Control knobs for the burners:
fStandard burner (front)
gVariable burner (rear)
bStandard burner :
C 5 11/16" (145 mm) -
Power: 1200 W
Indicators
cBurner indicators
dDisplay
kOn/Off indicator
lSymbol for the outer-ring of the
variable burner
m"Residual Heat" indicator
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the combiset
CS 1122
aExtended burner
C 7" or 7" x 10 7/16"
Control knobs for the burners:
fStandard burner (front)
gExtended burner (rear)
(180 mm or 180 mm x 265 mm) -
Power: 1500 W / 2400 W
bStandard burner
C 5 11/16" (145 mm) -
Power: 1200 W
cBurner indicators
Indicators
dDisplay
kOn/Off indicator
lExtended burner indicator
m"Residual Heat" indicator
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Clean the combiset
Metal components of the appliance
have a protective coating which may
give off a slight odor the first time the
appliance is heated.
^ Remove any protective coverings or
stickers.
^ Before using for the first time, clean
the appliance with a damp cloth and
dry with a soft cloth.
The smell will dissipate after a short
time and does not indicate a faulty
connection or appliance defect.
Do not use liquid dish soap to clean
the combiset, this may cause
permanent blue discolorations.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
How the burners work
One-ring burners use one heating strip, One-ring burner
and two-ring burners and grill zones
use two heating strips. Depending on
the model, the heating strips may be
separated by a certain distance. See
the illustrations.
Every burner is equipped with overheat
protection (inside temperature limiter),
to prevent the glass ceramic combiset
from overheating (see the section on
"Overheat protection").
aOverheating protection
When you select a power setting, the
heating element switches on and you
will see the heating strip through the
combiset.
bHeating strip
Two-ring burner
The power setting determines how hot
the burner will get, and this is
electronically regulated. This means
that the burner will switch on and off as
needed to maintain the selected power
level.
aTechnical detail (not a defect)
bOverheating protection
cOutside heating strip
dSeparation strip
eInside heating strip
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Turning a burner On/Off
Turning on the second ring on
a Variable/Extended burner
^ To turn a burner on, press the control
knob down and turn it clockwise a
to the desired setting.
^ Press the control knob down and turn
it clockwise past "12" to the n
symbol.
^ Then turn the control knob
counterclockwise to the desired
setting.
Turning off the burner will also turn off
the second ring. When the cooking
zone is turned back on again, only the
inside ring will be active.
^ To turn a burner off, turn the control
knob counterclockwise b to "0".
Do not turn a burner on without
pressing the control knob down, and
do not turn the knob past "12" or n
to reach "0".
This will result in damage.
When selecting level "12", make sure
that the control knob is set exactly to
the "12" position.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Residual Heat Indicator
When a cooking zone is switched on,
the On/Off indicator will light followed
by the residual heat indicator.
When the cooking zone is switched off,
the On/Off indicator goes out. The
residual heat indicator will turn off once
the cooking zone is safe to the touch.
Do not touch the burner or rest any
objects on the combiset when the
residual heat indicator is on. Danger
of burns!
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Settings
Use for
Power level*
Melt butter, chocolate, etc.
Dissolving gelatine
Prepare yogurt
1 - 2
Warming small quantities of food/liquid
Keeping delicate dishes warm
Cooking rice,
1 - 3
Thawing frozen vegetables
Warming liquid or half-set foods
Thickening sauces, e.g., hollandaise sauce
Cooking rice pudding
3 - 5
4 - 6
Defrosting frozen foods
Steaming vegetables, fish, etc.
Cooking pasta, soups, etc.
Steaming grains
Boiling and continued cooking of large quantities of food
7
Gently sautéing fish, cutlets, sausages, fried eggs, etc.
(without smoking the oil/fat)
8 - 9
Frying pancakes, crepes, etc.
9 - 11
Boiling large quantities of water
Parboil
11 - 12
Symbol for the second heating ring
n
* These settings are intended as guidelines only. When cooking with large pots,
large quantities or without using a lid, a higher setting is needed. For smaller
quantities select a lower setting.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Overheat protection
Each cooking zone is equipped with a
temperature limiter. This feature
automatically turns off the heating
element before the glass ceramic
becomes too hot. Once the ceramic
surface has cooled to a safe
temperature the heating element will
automatically turn back on.
The overheat protection may be
activated by:
– turning on a burner without putting a
pan on it.
– heating an empty pan.
– an uneven pan not sitting evenly on
the burner.
– the pan not conducting heat
properly.
If the heating elements cycle on and
off, even at the highest setting, the
overheating protection has been
activated.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting cookware
Following these tips will allow you to
make the most of your ceramic
combiset.
Pots and pans
Special cookware is not required, but
as is true with all types of cooking
appliances, the better the cookware,
the better the performance.
The cooking surface
The ceramic combiset is made of an
extremely hard and durable material.
The surface is scratch resistant, not
scratch proof. Avoid using cookware
with ridged bottoms. Ridged pots with
dirty or chipped enamel bottoms may
scratch the combiset if they are pulled
across the ceramic surface.
– For the most even and energy
efficient cooking, the diameter of the
pots/pans should match the diameter
of the burners as closely as possible.
Make sure the combiset and pot
bottoms are clean before cooking.
Certain items, particularly sugar grains
or crystallized liquids such as molasses
or syrups are harder than ceramic and
can scratch the surface if they are not
cleaned off immediately. Small or light
scratches will not affect the safety or
performance of the combiset.
– Use cookware with thick, flat, smooth
bottoms. Slightly concave bottoms
will also work adequately. Pans with
convex bottoms will not cook well.
– Whenever possible, keep pots and
pans closed while cooking. This
helps keep in the most possible heat.
– For longer cooking periods, you can
switch off the cooking zone 5 to 10
minutes before the total cooking time
is completed. The residual heat will
continue to cook the food.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting cookware
Copper bottom and aluminum pans
may leave a residue on the combiset in
the form of metallic lines. This is normal.
These lines can be removed using a
non-abrasive ceramic combiset cleaner
or a shielded scraper blade.
Be sure to clean the combiset after
each use. Each time this residue is
allowed to melt it becomes harder to
remove and may mar the
appearance of the combiset.
Let the combiset cool before
cleaning.
Cast iron, glass or stoneware should
not be used because they have poor
heat transfer and may scratch the
combiset surface.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Do not use a steam cleaner to clean
this appliance. Steam could
Be sure that pot and pan bases are
clean and dry.
penetrate electrical components and
cause a short circuit. Pressurized
steam could cause permanent
damage to the surface.
After cleaning dry the ceramic
surface with a soft cloth to prevent a
build up of limescale deposits.
Clean any spills immediately before
they become difficult to remove.
Do not use any sharp pointed
objects which could damage the
seal between the ceramic surface,
the surrounding frame and the
countertop.
Do not use liquid dish soap to clean
the ceramic surface. When using
dish soap a film is left on the surface
which can lead to discolorations on
the ceramic surface. These
discolorations cannot be removed.
Clean the ceramic surface regularly
with a ceramic cleaner.
Never use abrasive cleaners,
caustic (oven) cleaners, dishwasher
detergent, scouring pads, steel wool
or hard brushes. They will damage
the surface.
Clean the appliance regularly,
preferably after each use. Allow the
appliance to cool before cleaning.
The ceramic surface can be cleaned
using a cleaner for ceramic
surfaces. Follow the manufacturer’s
instructions.
Make sure that no cleaner residue
remains on the ceramic surface by
carefully wiping the combiset with a
damp cloth. They may damage the
combiset or produce toxic fumes
when heated.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Ceramic surfaces
Stainless steel
^ Wipe off any soiling using a damp
cloth. Stubborn soiling is best
removed with a shielded scraper
blade.
Clean stainless steel surfaces with
warm water and liquid dish soap
applied with a non-abrasive sponge
and then wipe dry with a soft cloth.
Soak baked or hardened spills first to
loosen them.
^ Apply a ceramic cleaner (available
from Miele) using a soft cloth or
paper towel.
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner (available from Miele).
^ To remove any limescale deposits or
metallic residue apply a ceramic
cleaner using a soft cloth or use a
shielded scraper blade if necessary.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
^ After cleaning wipe the ceramic
surface with a damp cloth and dry.
Do not use stainless steel cleaner on
or around the printing, it may rub
off. Use only a soft sponge with a
mild solution of warm water and
liquid dish soap to clean this area.
A cleaner with a special additive to
prevent water marks and smears on the
ceramic surface may be used.
Any melted solids like sugar, plastic or
aluminum foil should be removed as
quickly as possible, while the burner is
still warm. If they are allowed to harden
the combiset may become pitted.
^ Turn the burner off.
^ Using a shielded scraper blade,
scrape the melted item immediately
off the burner while it is still hot.
Use caution: Danger of burns!
^ Allow the combiset to cool and clean
as previously described.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
,Repairs should only be carried out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
What if the appliance does not heat up after it is turned on?
Possible fault
Solution
The circuit breaker has tripped.
Check whether a fuse is blown. If the
problem persists contact Miele.
What if a heating element turns off then on again?
Possible fault
Solution
The overheating protection has
activated.
See "Overheating protection".
What if the food seems to take too long to boil?
Possible fault Solution
The control knob may be set past level Turn the control knob exactly to "12".
"12". When the knob is sitting between
"12" and "0" the appliance operates at
reduced power.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Service
In the event of a fault which you cannot
easily fix yourself, please contact the
Miele Technical Service Department at
the address on the back of this booklet.
When contacting Technical Service
please quote the serial number and
model of the appliance.
Adhere rating label sticker supplied
with the appliance below.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Service
MieleCare
(USA only)
MieleCare, our Extended Service
Contract program; gives you the
assurance of knowing that your
appliance investment is covered by 5
years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability and
longevity of your Miele appliance.
Please note that unless expressly
approved in writing by the Miele Ser-
vice department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
21
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS
Note to the installer:
This appliance must not be used in
a non-stationary location (e.g. on a
ship).
~
Please leave this instruction book
with the consumer for the local
electrical inspector’s use.
Do not install this appliance above
~
an oven unless the countertop is at
least 1 9/16" (40 mm) thick.
The minimum distances given in
these Installation Instructions must
be observed in order to ensure safe
operation. Failure to do so increases
the risk of fire.
You must ensure the power cable
~
for the appliance will not come into
contact with the floor panel after
installation, nor be subject to any
mechanical strain.
The cabinetry and venting hood
should be installed first to prevent
damage to the combiset.
The appliance must not be
~
permanently sealed into the countertop
when installed. The sealing strip under
the edge of the appliance provides a
sufficient seal for the countertop. See
"Sealing".
The countertop must be bonded
~
with heat resistant (212°F/100°C)
adhesive to prevent distortion or
dissolving.
Any back splashes should be
heat-resistant as well.
Keep this instruction book in a safe
place for reference and pass it on to
any future user.
The combiset must not be installed
~
over a dishwasher, washer, dryer,
refrigerator or freezer. Heat radiated by
the combiset may damage them.
To eliminate the risk of burns or fire
~
by reaching over heated surfaces
cabinet storage space above the
appliance should be avoided. If cabinet
storage is necessary, the risk can be
reduced by installing a venting hood to
project horizontally a minimum of 5"
(127 mm) beyond the bottom of the
cabinets.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS
Safety distances above the
appliance
The minimum safety distance given by
the hood manufacturer must be
maintained between the combiset and
the hood above it. See the installation
instructions of the hood for these safety
measurements.
If the hood manufacturers instructions
are not available or if flammable objects
are installed over the combiset (e.g.
cabinets, utensil rail, etc.), a minimum
safety distance of 30" (760 mm) must
be maintained.
If there is more than one appliance
beneath a hood (e.g. wok burner
and electric combiset), and they
have different minimum safety
distances always observe the
greater distance.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS
Safety distances to the sides
of the appliance
The appliance should only be installed
as shown in the illustrations, while
(50 mm)
2 "
maintaining the required safety
distances shown. Do not install the
appliance between two tall cabinets,
this is a fire hazard.
A distance of at least 2" (50 mm) must
be kept between the countertop cut-out
and the rear wall because of the high
temperatures radiated.
recommended
The minimum distance required from
the countertop cut-out to the side wall
or cabinet a:
2"
(50mm)
2" (50 mm)
for CS 1112
CS 1122
CS 1212
CS 1221
CS 1223
CS 1326
CS 1327
CS 1411
1
not recommended
6" (150 mm)
for CS 1312
CS 1322
CS 1421
10" (250 mm)
for CS 1011
CS 1012
CS 1012-1
CS 1028
not allowed
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Safety distance from the wall covering
If a wall covering is installed, a minimum safety distance must be maintained
between the countertop cut-out and the covering, since high temperatures can
damage these materials.
If the covering is made of a combustible material (such as wood), the distance
between the countertop cut-out and the wall covering must be a minimum of
2" (50 mm).
For coverings made of non-combustible materials (such as metal, marble, granite
or ceramic tiles) the minimum safety distance e between the countertop cut-out
and the wall covering must be 2" (50 mm) minus the thickness of the covering.
For example: thickness of wall covering 9/16" (15 mm)
2" (50 mm) - 9/16" (15 mm) = minimum safety distance 1 3/8" (35 mm).
aWall frame
bWall covering
x = thickness of the wall covering
cCountertop
dCountertop cut-out
eMinimum safety distance
with flammable materials 2" (50 mm)
with non-flammable materials 2" (50 mm) minus x
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation dimensions CS 1112
aSpring clips
bAppliance front
cInstallation height
dPower supply box with connection cable, L = 78 3/4" (2000 mm)
eRating label
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation dimensions CS 1122
aSpring clips
bAppliance front
cInstallation height
dPower supply box with connection cable, L = 78 3/4" (2000 mm)
eRating label
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Cut out
If during installation the seal around
the frame does not sit flush with the
countertop in the corners, the corner
radius, maximum 3/16" (4 mm), can
be carefully filed down to fit.
^ Make the countertop cut-out for the
desired number of appliances
according to the dimensions
drawings.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the left or right of the
combiset.
See also the "IMPORTANT
INSTALLATION SAFETY
INSTRUCTIONS".
^ Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture.
The materials used must be heat
resistant.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation of multiple
appliances
When installing more than one combiset appliance, a support bar b must be
installed between the appliances.
Countertop cut-out
two appliances
Countertop cut-out
three appliances
For the installation of two appliances
the width of the countertop cut-out D is
the sum of A and C.
For the installation of three appliances
the width of the countertop cut-out D is
the sum of A and B and C.
A, B and C = appliance width
11 5/16", 15" or 22 11/16"
(288 mm, 380 mm or 576 mm)
minus 5/16" (8 mm) to allow for the
overhang
If more than three appliances are
being installed, you will need to add,
A, B or C for each additional
appliance.
D = width of the countertop cut-out
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Sample calculations for a countertop cut-out for three appliances
A
B
appliance width
C
D
appliance width
minus 5/16"
(8 mm)
appliance width
minus 5/16"
(8 mm)
Countertop
cut-out
11" (280 mm)
11" (280 mm)
11 5/16" (288 mm)
15" (380 mm)
11" (280 mm)
33 3/8" (848 mm)
40 5/8" (1032 mm)
14 5/8" (372 mm)
11" (280 mm) 22 11/16" (576 mm) 22 3/8" (568 mm) 56 1/16" (1424 mm)
14 5/8" (372 mm) 11 5/16" (288 mm)
14 5/8" (372 mm) 15" (380 mm)
11" (280 mm)
37" (940 mm)
14 5/8" (372 mm)
44 1/4" (1124 mm)
14 5/8" (372 mm) 22 11/16" (576 mm) 22 3/8' (568 mm) 59 11/16" (1516 mm)
22 3/8" (568 mm) 11 5/16" (288 mm)
11" (280 mm)
14 5/8" (372 mm)
22 3/8" (568 mm)
44 3/4" (1136 mm)
52" (1320 mm)
22 3/8" (568 mm)
22 3/8" (568 mm)
15" (380 mm)
-
44 3/4" (1136 mm)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
aSpring clips
bSupport bars
cSpace between support bar and countertop
dCover
The illustration represents the attachment of spring clips a and support bars b
for 3 appliances.
An additional support bar is required for each additional appliance. The position
for attachment of an additional support bar depends on the width of appliance B.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Attach the spring clips and
support bars
Wood or solid surface countertops
^ Place the supplied spring clips a
and the support bars b at the
marked positions as shown above,
by laying them on the upper edge of
the cut-out and then securing them
with the 1/8" x 1" (3.5 x 25 mm) screws
(supplied).
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Granite countertop
The screws are not needed for
granite countertops.
^ Coat the side and lower edges of the
spring clips between a and b with
silicone.
^ Fill the space e between the support
bars b and the countertop with
silicone.
^ Position and attach the spring clips
a and support bars b with strong,
double-sided tape c.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installing the appliance(s)
^ Place the front edge of the next
appliance into the cut-out.
^ Feed the power cord down through
the cut-out.
^ Connect the appliance(s) to the main
power supply (see "Electrical
connection").
^ Place the front edge of the appliance
into the cut-out.
^ Turn the appliance(s) on and check
the function.
^ With a hand on each side of the
appliance press down evenly on the
edges until it clicks into position.
When doing so make sure that the
appliance seal sits tightly on the
countertop to ensure it is sealed
correctly. This is important to ensure
an effective seal. Do not permanently
seal into the countertop.
The appliance may be lifted out
using a special tool.
The appliance can also be pushed
up and out from underneath.
Note: push the rear out first.
^ Push the installed appliance to the
side until the holes in the support bar
are visible.
^ Insert the cover d into the holes in
the support bar b.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Sealing
Tiled surfaces
The appliance must not be
The grouting a and shaded area under
the appliance frame must be flat and
even so that the frame will lie evenly
and the sealing strip under the edge of
the upper part of the appliance can
provide an adequate seal against the
countertop.
permanently sealed into the countertop
when installed. The sealing strip under
the edge of the appliance provides a
sufficient seal for the countertop.
If the appliance is sealed into
position, the countertop or appliance
could be damaged if it needs to be
removed for maintenance or service.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Power supply
,CAUTION: Before installation or
servicing, disconnect the power
supply by either removing the fuse,
shutting off the main power or
manually "tripping" the circuit
breaker.
^ Be sure your electrical supply
matches the rating label.
The rating label is located on the
underside of the appliance.
The combiset is equipped with a power
cord encasing 3 wires ready for
connection to a grounded power
supply.
They must be connected to a
dedicated line through the use of an
approved junction box.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous.
Black : connect to L1 (hot)
Red: connect to L2 (hot)
Green: connect to GND (ground):
Before connecting the appliance to
the power supply, make sure that
the voltage and frequency listed on
the rating label correspond with the
household electrical supply. This
data must correspond to prevent
appliance damage. Consult an
electrician if in doubt.
208 V, 60 Hz, 20 A fuse rating
240 V, 60 Hz, 15 A fuse rating
Be sure the power outlet is accessible
after installation.
For further information, see the wiring
diagram provided with the appliance.
Only operate the appliance after it
has been installed into the
countertop.
, WARNING:
THIS APPLIANCE MUST BE
GROUNDED!
Installer:
Please leave these instructions with
the consumer.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Help protect our environment
Disposal of packing materials
Disposal of an old appliance
The cardboard box and packing
materials are biodegradable and
recyclable. Please recycle.
Old appliances contain materials that
can be recycled. Please contact your
local recycling authority about the
possibility of recycling these materials.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Before discarding an old appliance
disconnect it from the electrical supply
and cut off the power cord to prevent it
from becoming a hazard.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 3911
M.-Nr. 07 346 400 / 04
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|