READ AND SAVE THESE INSTRUCTIONS
Pod Brewing System
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL IMPORTANT
SAFEGUARDS
WARNING: This appliance generates heat and escaping steam
during use. Use proper precautions to prevent the risk of burns,
fires, or other injury to persons or damage to property.
• All users of this appliance must read and understand this
Owner’s Manual before operating or cleaning this appliance.
• The cord to this appliance should be plugged into a 120V AC
electrical outlet only.
• Use water only in this appliance! Do not put any other liquids or
food products in this appliance. Do not mix or add anything to the
water placed in this appliance, except as instructed in the User
Maintenance Instructions to clean the appliance.
• DO NOT attempt to move an appliance containing hot liquids.
Allow appliance to cool completely before moving.
• Keep appliance at least 4 inches away from walls or other objects
during operation. Do not place any objects on top of appliance
while it is operating. Place the appliance on a surface that is
resistant to heat.
• If this appliance begins to malfunction during use, immediately
unplug the cord. Do not use or attempt to repair the
malfunctioning appliance.
• If this appliance falls or accidentally becomes immersed in water
or any other liquid, unplug immediately. Do not reach into the
water! Do not use this appliance after it has fallen into or
has become immersed in water. Contact Consumer Service
for examination and repair.
• Do not leave this appliance unattended during use.
• Always use fresh, cool water in your coffee maker. Warm water
or other liquids, except as listed in cleaning section, may cause
damage to the appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
POLARIZED PLUG: This appliance has a polarized plug, (one
blade is wider than the other). To reduce the risk of electric shock,
this plug is intended to fit into a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not attempt to modify the
plug in any way.
SHORT CORD INSTRUCTIONS: A short power supply cord is
provided to reduce the risk resulting from becoming entangled in or
tripping over a longer cord.
Do not use an extension cord with this product.
ELECTRIC POWER: If the electric circuit is overloaded with other
appliances, your appliance may not operate properly. It should be
operated on a separate electrical circuit from other appliances.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT REMOVE THE BOTTOM COVER. NO USER-
SERVICEABLE PARTS INSIDE. REPAIR SHOULD BE DONE BY
AUTHORIZED SERVICE PERSONNEL ONLY.
CAUTION: To prevent Plasticizers from migrating from the finish of
the countertop or tabletop or other furniture, place NON-PLASTIC
coasters or placemats between the appliance and the finish of the
countertop or tabletop.
Failure to do so may cause the finish to darken, permanent
blemishes may occur or stains can appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Your product may vary slightly from illustration.
Parts Identification
(P/N 31001-52)
(P/N 31002-52)
(P/N 31008)
FIGURE 1
Power Light/
Indicator Button
5-ounce Serving Button
8-ounce Serving Button
FIGURE 2
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Before UsingYour
One:One™ Pod Brewing System
Become familiar with all parts of the appliance.
Keep your One:One™ clean
Clean and descale your One:One™ on a regular basis. See
“Cleaning and Descaling”, pages 12 - 13. We recommend cleaning
the Water Tank and the Drip Spout as well as the Pod Chamber and
Pod Holder, before using your One:One™ for the first time.Turn on the
machine for a full cycle using water only. See steps 1 - 9
following.
IMPORTANT: THE MACHINE WILL NOT FILTER COFFEE OR TEA
UNLESS THE PUMP HAS BEEN PRIMED BY
FOLLOWINGTHE STEPS BELOW.
1. Remove the Water Tank by pulling out and then up to remove
from the Base, see Figure 3.
FIGURE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
6
2. Fill the Water Tank with fresh water up to the ‘MAX’ line, and fit
back into the Base (down and in) until it “snaps” into place, see
Figure 4.
FIGURE 4
3. Lift Lid by pulling out on the Lever. Top will pop up. Push back
so Lid is in fully raised position, see Figure 5.
TO OPEN:
FIGURE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Note: One Drip Spout has been included in your One:One™.
Additional Drip Spouts or a special Iced Tea Spout is
available. Please refer to page 11 for information on how to
order additional Spouts for your One:One™.
4. Assemble the Drip Spout to the Pod Chamber.
5. Place the Drip Spout Assembly inside the One:One™.
6. Place the Pod Holder inside the Pod Chamber. (Do not place a
tea or coffee pod in the Pod Holder.) See Figure 6.
Drip Spout
Assembly
FIGURE 6
7. To close the Lid, press down firmly on the top of the Lid and
hold in place while pushing the Lever back so it is flush with the
Lid and locks into place, see Figure 7.
TO CLOSE:
FIGURE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
8
8. Place a 32-ounce container below the Drip Spout to collect the
water.
9. Press the Power Light/Indicator Button to turn power on, then
simultaneously press the 5-ounce and 8-ounce Serving Buttons,
see Figure 8.
FIGURE 8
The water from the Water Tank will cycle through the One:One™.
Note: If your One:One™ goes unused for 3 or more days, please
repeat above process (steps 1 - 9).
CAUTION: Do not immerse cord, plug or machine in water or other
liquid.
Brewing Coffee or Tea
CAUTION: Before brewing in your One:One™ for the first time,
complete the steps listed under “Before Using Your
One:One™ Pod Brewing System” on pages 6 - 9 to ensure
your machine functions properly.
1. Fill the Water Tank with water up to the ‘MAX’ line. Never pour
other liquids such as milk or hot water into the Water Tank. A
full tank will yield up to 24-ounces of coffee or tea (three 8-
ounce mugs).
2. Press the Power Light/Indicator Button.The indicator light will
flash while the water heats up. Heating will take approximately
1-1/2 minutes.
3. To open the Lid, place one finger behind Lever and pull out.
Gently raise Lid to open position.
4. Assemble the Drip Spout to the Pod Chamber.
5. Place the Drip Spout Assembly inside the One:One™.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
6. Place the Pod Holder inside the Pod Chamber. See Figure 6.
7. Place one Melitta® javapod™ or Cooper’s® teapod™ inside the
Pod Holder. Press lightly on the javapod™ or teapod™ to make
sure it sits evenly inside the Pod Holder.
correct
incorrect
correct
FIGURE 9
IMPORTANT: Make sure the paper lip of the coffee pod is contained
within the Pod Holder and does not overhang on the rim.
See Figure 9.
CAUTION: Use only specially designed Melitta® javapods™ or
Cooper’s® teapods™ in your One:One™ Pod Brewing
System. The use of loose ground coffee, pods or tea
™
bags not designed for the One:One,. may result in poor
coffee or tea, and could possibly damage the machine.
CAUTION: Never use torn javapods™ or teapods™ as this could clog
the machine and damage it. Each javapod™ or
teapod™ is pre-portioned with the optimal amount of
coffee or tea required per cup.
8. To close the Lid, press down firmly on the top of the Lid and hold
in place while pushing the Lever back so it is flush with the Lid
and locks into place. See Figure 7.
CAUTION: Make sure the Drip Spout Assembly is in position inside
™
the One:One.
9. Place a mug or cup under the Drip Spout. The cup should hold
at least 7 to 10 ounces, depending on your selection.
10. When the indicator light stops flashing, the appliance is ready
to use. If the indicator light flashes at rapid intervals, see
troubleshooting on page 14.
Note: Use one javapod™ to brew either one 5-ounce, bold European
serving, or one 8-ounce serving of American-style coffee.
When brewing tea, be sure to select the 8-ounce serving.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
11. Press the desired Serving Button: for either a 5-ounce serving
or an 8-ounce serving. The machine will begin the brewing
process. At the beginning of the brewing cycle, a small amount of
water is dispersed to saturate the pod to ensure full extraction.
Following a pause, the machine will brew for about 50 seconds
for coffee (or 35 seconds for tea).You can manually stop the
brewing process at any time by pressing the Power Button.
CAUTION: Dripping may occur between brewing cycles.
12. Dispose of the javapod™ or teapod™ after use by removing the
Pod Holder from the Pod Chamber and emptying it. Do not use
a pod more than once. Repeated use may cause the pod to
burst and result in weak and inferior coffee or tea.
Note: Regular rinsing of the Pod Holder will optimize the flavor of
the beverage.
You may leave your One:One™ on if you intend to brew another
cup of coffee or tea. The appliance will turn itself off automatically
after one hour.
Drip Spouts
Included for use in your One:One™ Pod Brewing System is a Drip
Spout for coffee and/or tea. To maximize the flexibility of your
Brewing System and to avoid residual flavor when alternating
between coffees or teas, you may wish to purchase additional Drip
Spouts. Also available is a shorter Spout designed specifically for
toll free, 1-800-841-1628.
Iced Tea Spout Set:
(P/N 31095SET)
includes: Tea Pod Holder
Pod Chamber
Iced Tea Spout
Drip Spout Set:
(P/N 31003SET)
includes: Pod Holder
Pod Chamber
FIGURE 10
Drip Spout
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Helpful Hints for Brewing
Fresh Water
For optimal results, use fresh water daily. If you haven’t used your
machine for a few days, follow steps 1 - 9 in section “Before UsingYour
One:One™ Pod Brewing System,” pages 6 -9.
Note: If the Water Tank is dry for 3 or more days, review section “Before
Using Your One:One™ Pod Brewing System,” steps 1 - 9.
Javapods™ and Teapods™
Remember to remove pods after use. If a pod is left inside the machine
for some time without having used the system, remove it and see “Before
UsingYour One:One™ Pod Brewing System,” page 6, before attempting
to brew coffee or tea.
Use only specially designed Melitta® javapods™ or Cooper’s® teapods™
in your One:One™ Pod Brewing System. The use of loose ground
coffee, pods or tea bags not designed for the One:One™, may result in
poor coffee or tea, and could possibly damage the machine.
Never use torn javapods™ or teapods™ as this could clog the machine
and damage it. Each javapod™ or teapod™ is pre-portioned with the
optimal amount of coffee or tea required per cup.
User Maintenance Instructions
This appliance requires little maintenance. It contains no user serviceable
parts. Do not try to repair it yourself. Any servicing requiring disassembly
other than cleaning, must be performed by a qualified appliance repair
technician.
Care and Cleaning
CAUTION: Do not immerse cord, plug or machine in water or other
liquid.
1. Always unplug the appliance before
cleaning.
2. Clean the outer surface of the unit and
the Water Diffuser with a damp cloth.
3. Remove and disassemble the Drip
Spout Assembly: Pod Holder, Pod
Tab
Chamber and Drip Spout. To separate
the Pod Chamber and Drip Spout,
press Tab on the back side of the Drip
Spout to remove, see Figure 11.
FIGURE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
12
FIGURE 12
4. Remove the Drip Tray and Overflow Tray, see Figure 12.
5. Remove the Water Tank from the unit. Clean the Water Tank, Pod
Holder, Pod Chamber, Drip Spout, Drip Tray and Overflow Tray with
hot water. If necessary, use a small amount of dish soap.
Note: The Pod Holder, Pod Chamber, Drip Spout, Drip Tray and
Overflow Tray may be washed in the dishwasher (top
shelf only). The top part of the tank can be removed for
thorough cleaning. Do not place the Water Tank in the
dishwasher.
6. Rinse all parts with fresh water after cleaning.
Note: Do not try to dry the inside of the Removable Water Tank
with a cloth because this will leave a residue of lint and
may clog your Coffeemaker.
Descaling
Regular descaling will extend the service life of your machine and
ensure optimal results over time.
1. Follow the instructions given in “Before Using Your One:One™
Pod Brewing System,” pages 6 - 9, replacing one fourth of the
water with white vinegar.
2. Do not place a tea or coffee pod in the Pod Holder. Follow the
Brewing Instructions beginning on page 9 to brew three, 8-oz.
cups of the vinegar solution.
3. Remove Water Tank, Pod Holder, Pod Chamber and Drip Spout
and wash thoroughly.
4. Repeat instructions in step 2 (above) up to 4 times in order to
flush vinegar residue. Empty Water Tank and refill with fresh
water after each cycle.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Troubleshooting
Should a problem occur, you may be able to find an answer in the
text below. If the text proves unhelpful or if you require further
information, please contact Consumer Service.
1. The coffee or tea is too weak.
Check the following:
• the pod is placed properly in the Pod Holder.You may need
to lightly press it down into the holder.
• you have selected the correct Button according to the number
of ounces and strength desired. Use one javapod™ for either
one 5-ounce, bold European serving, or an 8-ounce serving
of American style coffee. When brewing tea, be sure to
select the 8-ounce serving.
• you are using a fresh Melitta® javapod™ or Cooper’s® teapod™.
2. The coffee is too strong.
Check that you have selected the correct Button. Use the
8-ounce Button for less robust coffee.
3. There is less water than normal volume of water during brew
cycle brewing from the appliance into the cups. Descale
appliance. See “Descaling,” page 13.
4. Water drips from the appliance.
Note: Some water may drip between cycles, this is normal.
Check the following:
• the Pod Holder must be placed properly within the Pod
Chamber and the Lever locked into position.
• the Water Tank must not be filled above the ‘MAX’ line.
• the Pod Holder may be clogged. Rinse under tap water to
unclog the screen. If necessary, you may also use a scrubbing
brush or a pin.
• the pod must be properly placed so it sits evenly into the
holder. Lightly tap it down into the holder.
• some water droplets on your countertop are normal and may
be caused by the filling and replacing of the Water Tank.
5. The indicator light is flashing.
A flashing indicator light means the machine is heating. This
normally lasts for 1-1/2 to 2 minutes. If indicator light is flashing
rapidly (more than a second apart), see #6 following.
If the indicator light flashes continually for more than 4 minutes,
contact Consumer Service.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
6. The indicator light keeps flashing at rapid intervals.
Check the following:
• the Water Tank must be inserted properly inside the appliance.
• there must be enough water in the Water Tank. Fill the Water
Tank to the ‘MAX’ fill line.
• the appliance may require cleaning. See “Before Using Your
One:One™ Pod Brewing System”, pages 6 - 9.
• room temperature must be above 40°F.
7. The Lid will not open.
Turn appliance off. Unplug appliance.Wait for appliance to cool
completely (about 30 minutes) and try opening Lid again. Clean
all removable parts (Drip Spout, Pod Holder, Pod Chamber) as
described on pages 12 - 13.
For any other problem please contact Consumer Service,
1-800-233-9054 or email us at
To Order Melitta® Javapods™
or Cooper’s® Teapods™
It’s easy to order pods. Just log onto our dedicated website,
To order by phone, call toll-free, 1-800-841-1628.
To ensure a steady supply of fresh javapods™ and teapods™ and to
take advantage of special promotions, join our One:One™ Continuity
Club (see registration materials included with this product).
Melitta® javapods™ and Cooper’s® teapods™ are also available at many
retail outlets that carry the Melitta® One:One™ Pod Brewing System
or Melitta® One:One™ Javapod™ Coffeemakers.
IMPORTANT NOTICE
If any parts are missing or defective,
DO NOT return this product.
Please call our Customer Service Department for assistance.
1-800-233-9054 Monday - Friday 9:00 am - 5:00 pm CST
Thank You
Download from Www.Somanuals.com. All Manuals Search And Download.
15
LIMITED ONE-YEAR WARRANTY
Warranty Coverage: This product is warranted to be free from defects in
materials or workmanship for a period of one (1) year from the original purchase
date. This product warranty is extended only to the original consumer purchaser
of the product and is not transferable. For a period of one (1) year from the date
of original purchase of the product, our Repair Center will, at its option, either
(1) repair the product or (2) replace the product with a reconditioned
comparable model. These remedies are the purchaser's exclusive remedies
under this warranty.
Warranty Service: To obtain warranty service, you must call our warranty
service number at 1-800-233-9054 for return instructions on how to deliver the
product, in either the original packaging or packaging affording an equal degree
of protection to the Repair Center specified below. You must enclose a copy of
your sales receipt or other proof of purchase to demonstrate eligibility for
warranty coverage.
To return the appliance, ship to:
To contact us, please write to, call, or email:
ATTN: Repair Center
708 South Missouri Street
Macon, MO 63552 USA
Consumer Relations Department
PO Box 7366
Columbia MO 65205-7366 USA
1-800-233-9054
E-mail:[email protected]
What Is Not Covered: This warranty does not cover damage resulting from
misuse, accident, commercial use, improper service or any other damage
caused by anything other than defects in material or workmanship during
ordinary consumer use. This warranty is invalid if the serial number has been
altered or removed from the product. This warranty is valid only in the United
States and Canada.
LIMITATION ON DAMAGES: THERE SHALL BE NO LIABILITY FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT.
DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES AND
CONDITIONS, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES
AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE OR USE ON THIS PRODUCT ARE LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied warranty
lasts, so the above limitations or exclusions may not apply to you. This warranty
gives you specific legal rights and you may have other rights under the laws of
your jurisdiction.
For more information on our products, visit our website:
©2005 All rights reserved.
Made in China
P/N 61468-52
8/05
Download from Www.Somanuals.com. All Manuals Search And Download.
|