|
MAXX-2400HD™
High Definition Video Server
P/N 700-119-000x
Operations Manual
Rev 7 August 2009
Software version 1.03.515
Copyright © 2009, 360 Systems
All rights reserved
Printed in the United States of America
Download from Www.Somanuals.com. All Manuals Search And Download.
™
Contents
Preface_______________________________________________________________ 9
Software and Operations Manual Revisions ................................ 9
Safety Notices ________________________________________________________ 10
Safety Terms and Symbols.........................................................10
General Safety Caution..............................................................10
Personal Injury Precautions .......................................................10
Product Damage Precautions.....................................................11
Product Registration..................................................................11
Product Improvements and Upgrades ........................................11
Trademarks...............................................................................11
Software Copyrights..................................................................11
Video and Audio Copyright Reminder.......................................11
Introduction _________________________________________________________ 12
Key Features and Benefits .....................................................................15
Applications for 360 Systems Servers ....................................................16
Accessory Information ..........................................................................17
Installation___________________________________________________________ 18
Unpacking ...........................................................................................18
Important Installation Notes..................................................................19
System Cooling.........................................................................19
Power Conditioning..................................................................19
About Server Software ..........................................................................21
Rack Mounting.....................................................................................22
Mounting an Audio Module (AXP-3, AXP-4 or DXP-1)................22
Mounting the Control Module (CXP)..........................................22
Connecting the Monitor, Mouse and Keyboard..........................23
Installing the Hard Drives..........................................................23
Rear Panel Connections........................................................................24
Audio Module Connections ..................................................................27
The AXP-3, AXP-4 and DXP-1....................................................27
Control Module (CXP) Connections.......................................................27
Serial Control Ports for Channels 1, 2, 3 & 4..............................28
GPI Control ..............................................................................28
Basic Operations______________________________________________________ 29
The Server Desktop ..............................................................................29
Launching the Graphic User Interface........................................29
Shutting Down the Server..........................................................29
MAXX-2400HD Owner’s Manual
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Graphic User Interface Overview..........................................................30
System Menu Bar......................................................................31
Show Menu ..............................................................................31
Edit Menu.................................................................................31
Windows Menu........................................................................31
Help Menu ...............................................................................32
The Status Bar...........................................................................32
The Transport Channel View.....................................................33
Transport Menu Bar ..................................................................33
Options Menu ..........................................................................34
The Playlist Channel View.........................................................35
Playlist Menu Bar......................................................................35
Options Menu ..........................................................................36
Initial System Configuration ..................................................................37
Selecting a Sync Reference........................................................37
Setting the Video Sync Source...................................................37
Making a Recording from the GUI ........................................................39
Record Configuration Options...................................................39
Setting the Video Bit Rate..........................................................39
Setting the Audio Input Source ..................................................40
Arming Audio Tracks ................................................................40
Setting an Audio Delay Time.....................................................40
Audio Rate Conversion .............................................................41
Setting VANC Line Selections....................................................42
Selecting a Time Code Source ...................................................42
Beginning Recording.................................................................42
Making a Crash Recording.........................................................43
Making a Named Recording......................................................43
Monitoring a Recording Source with E-E Mode ..........................44
Playing a Clip from the GUI..................................................................46
Beginning Playback...................................................................46
Looping a Clip..........................................................................46
Pausing a Clip...........................................................................46
Ejecting a Clip...........................................................................47
Using Jog..................................................................................47
Using GO-TO...........................................................................47
Using Fast Forward / Rewind.....................................................47
Slow Motion Playback...............................................................47
Using Shuttle to Control Playback Speed ...................................47
Editing a Clip........................................................................................49
Using Edit While Recording ......................................................49
System Configuration............................................................................51
Assigning Names to the Server and Transport Channels..............51
Programming GPIO Outputs .....................................................52
Programming GPI Inputs ...........................................................53
Configuring the Ethernet Network .............................................54
Setting the Date and Time .........................................................56
Page 4
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Clip Navigator......................................................................................57
Renaming and Deleting Clips....................................................57
Sorting Clips .............................................................................57
Filtering the Clip Display...........................................................57
Finding Clips ............................................................................58
Finding Clips Using Wildcards ..................................................58
Finding Clips Using Regular Expressions....................................59
Using Playlists......................................................................................60
The Playlist View ......................................................................61
Creating and Running a Playlist.................................................62
Loading a Playlist (FILE>OPEN)................................................63
Saving a New Playlist (FILE>SAVE AS)......................................63
Saving an Existing Playlist (FILE>SAVE).....................................63
Setting a Start Time for a Playlist................................................63
Stopping a Playlist (STOP) .........................................................64
Pausing Playlist (PLAY/PAUSE) ..................................................64
Cueing Clip (CUE).....................................................................64
Looping Playlist (LOOP [X] ).....................................................64
Showing First Frame of CUED Clip (SHOW)..............................64
Preparing Next Clip for Playback (NEXT) ...................................64
Jumping to Selected Clip (JUMP) ...............................................64
Scrolling to Currently Playing Clip (HOME) ...............................64
Set Maximum Number of Items to Keep.....................................65
Enabling As-Run Logging...........................................................65
Viewing, Editing and Archiving Playlists ....................................65
Editing Playlists.....................................................................................65
Removing Clip from a Playlist ...................................................65
Removing Clips Above or Below the Selected Clip ....................66
Inserting HOLD Into a Playlist...................................................66
Appending a Playlist (FILE->APPEND) ......................................66
Changing Duration of Clips in Playlist .......................................66
Mapping GPO to Playlist Events ................................................67
Mapping GPI to Control a Playlist..............................................68
Advanced Topics______________________________________________________ 69
System Timing ..........................................................................69
Using Embedded Audio ............................................................70
Using Audio Sample Rate Conversion........................................70
Ganging Channels for Synchronized Playback ...........................71
Combined Video and Graphics Capabilities...............................72
Importing TARGA Graphics Files...............................................72
Animation Import (.mov files)....................................................72
Still Frames...............................................................................73
FTP File Transfers......................................................................74
MAXX-2400HD Owner’s Manual
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Time Protocol ________________________________________________ 78
Automatic Date/Time Updates...................................................78
Connecting to the Network .......................................................78
Configuring NTP.......................................................................79
Selecting the Time Zone............................................................79
Automation Control ___________________________________________________ 82
Remote Serial Control ...............................................................82
Configuring the Automation Interface ........................................83
Other Automation Options........................................................85
Tested Automation Controllers ..................................................87
Tested Remote Control Panels and Switchers.............................87
Remote Workstation Interface __________________________________________ 88
System Requirements................................................................88
About the Remote Workstation Interface....................................89
Operations................................................................................89
Installation................................................................................90
After Installation........................................................................90
Hard Disk Management........................................................................91
About RAID 6...........................................................................92
Improved Write Performance ....................................................92
Managing Disk Arrays...........................................................................93
Error Notification and Repair.....................................................93
Log-In to the RAID Utilities .......................................................95
Determining the Condition of the RAID Array............................96
Displaying the Alarm Log of the Raid Array ...............................97
Checking Status of the Drives....................................................98
Removing the Degraded Drive from the RAID Unit....................99
Rebuilding the RAID Array......................................................100
Replacing Hard Drives ............................................................101
RAID Controller Settings .........................................................102
Multi-Channel Audio..........................................................................103
Audio Input/Output Modules...................................................103
DXP-2 Digital Audio Module...................................................103
DXP-2 Technical Specifications ...............................................104
AXP-3 Analog Audio Module ..................................................104
AXP3/AXP4 Technical Specifications .......................................105
Maintenance ________________________________________________________ 106
Fault Diagnostics................................................................................106
Front Panel Indicators..............................................................106
Gigabit Ethernet Indicators ......................................................107
Access To Components.......................................................................107
Opening the Front Panel .........................................................107
Removing the Top Cover.........................................................107
General Handling Precautions.................................................108
Installing/Removing I/O Cards.................................................108
Software Updates From CD-Rom.........................................................109
Program Updates from USB Memory ..................................................110
Page 6
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Updating Firmware.............................................................................111
Replacing a Hard Drive ......................................................................113
Factory Repair Policy..........................................................................113
Regulatory Certifications.....................................................................114
Safety .....................................................................................114
Radio Interference Compliance ...............................................114
Product Warranty____________________________________________________ 115
End User License Agreement___________________________________________ 116
Appendix A _________________________________________________________ 118
Connector Specifications ....................................................................118
Audio XLR-3 Connector Pinout................................................118
Serial Control Connector Pinout ..............................................118
BNC Connectors.....................................................................119
GPIO Connectors....................................................................119
GPI Connector Pinout .............................................................119
System Board Ports .................................................................121
Appendix B _________________________________________________________ 122
Serial Command Protocols..................................................................122
VDCP Command Table...........................................................122
P2 Serial Command Table.......................................................124
Odetics® Protocol ...................................................................125
Appendix C _________________________________________________________ 128
Technical Specifications......................................................................128
Keyboard Shortcuts.............................................................................129
Appendix D _________________________________________________________ 130
Playlist Management Detail ................................................................130
Appendix E__________________________________________________________ 133
As-Run Logging Detail ........................................................................133
As-Run Naming Convention....................................................133
Sample As-Run Log.................................................................133
As-Run Log Page Header.........................................................134
As-Run Log Body ....................................................................134
Appendix F__________________________________________________________ 135
Mechanical Drawing ..........................................................................135
Index_______________________________________________________________ 136
MAXX-2400HD Owner’s Manual
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 8
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
This manual provides installation, setup and operating instructions for 360 Systems’ MAXX-
2400HD video server. It is organized to provide quick access to topics of primary interest. An
extensive Table of Contents is provided at the beginning, and a subject Index at the end, to assist in
locating information.
If you have already used other video servers or VTRs, you may find discussion of the basic
server to be covering familiar topics. However, it is strongly recommended that engineering
managers and staff members operating the server read through this manual. Being familiar with its
operation can prevent operational mistakes, and will make all users aware of important set-up and
maintenance issues.
Software and Operations Manual Revisions
Software revisions are released from time-to-time that introduce new product features, or
improve the performance of the product. When such revisions are shipped as a CD-ROM, printed
operational notes are included. When revisions are introduced in the course of product
production, an updated Operations Manual will be shipped with new servers.
The title page of an Operations Manual indicates its revision number, which should always
match the software revision of the server with which it is used. Operations Manuals for the latest
revision may be obtained from 360 Systems Customer Service, or from 360 Systems’ web site.
Your comments are welcome. If anything in this manual seems unclear, please let us know by
sending an email to [email protected].
Typographical Conventions
The following typographical conventions are used to clarify meaning:
•
•
•
•
Connector or indicator labeling that appears on the unit is shown in Arial Narrow Bold.
GUI menu items are shown in Arial Bold.
Text typed into the GUI and Key Commands are shown in Courier Bold.
GUI sub-menu paths are shown by the > symbol.
MAXX-2400HD Owner’s Manual
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Notices
Safety Terms and Symbols
THE FOLLOWING WARNING SYMBOLS ARE USED IN THIS MANUAL:
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
ATTENTION: REFER TO OWNER’S MANUAL FOR IMPORTANT
INFORMATION.
ATTENTION: VEUILLEZ VOUS RÉFÉRER AU MODE D’EMPLOI
POUR UNE INFORMATION IMPORTANTE.
ATTENZIONE: FATE RIFERIMENTO AL MANUALE PER
INFORMAZIONI IMPORTANTI.
ATENTCION: FAVOR DE REFERIR AL MANUAL DE
OPERACION POR INFORMACION IMPORTANTE.
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
WARNING: ELECTRICAL SHOCK HAZARD.
AVERTISSEMENT: DANGER DE CHOC ÉLECTRIQUE.
AVVERTIMENTO: PERICOLO DI SHOCK ELETTRICO.
ADVERTENSIA: PELIGRO DE CHOQUE ELECTRICO.
General Safety Caution
•
Heed the following important cautions regarding the server in order to avoid personal injury or
equipment damage.
•
Only qualified personnel should perform installation and service. Refer to appropriate sections
of this product manual for instruction. Contact 360 Systems Customer Support for further
explanation, or to clarify any uncertainty.
•
Disconnect the power cord before removing the cover.
Personal Injury Precautions
To avoid electric shock, do not operate this product with covers removed.
To avoid risk of fire, replace the power cord only with same type and rating as specified. Replace
damaged power cords immediately.
This product is grounded through the grounding conductor of the power cord. To avoid electric
shock, do not remove or modify the contacts on the plug.
Prevent the power cord from being walked on, pinched, or abraded.
To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
Remove jewelry such as watches or metallic necklaces before servicing this equipment.
Page 10
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Damage Precautions
•
360 Systems’ MAXX-2400HD™ server contains hard disk drives and other fragile electronic and
mechanical devices. While designed to be very reliable, it is still vulnerable to shock. Handle
with care, and exercise caution not to drop or bump the server as damage to internal
components may result. Always turn off power before moving the server.
•
•
Do not obstruct air vents. Maintain an ambient temperature below 30°C (86°F).
Clean only with a soft cloth dampened with water. Do not spray cleaners or solvents directly
on the product.
CAUTION
:
Replace the motherboard battery only with the same, or equivalent battery type. Follow
all local laws regarding the disposal of BR and CR Lithium batteries. Batteries should be
fully discharged prior to disposal.
CAUTION
:
Never use disconnect AC power to shutdown the server. Doing so may cause errors in
the hard disk array. Should this happen, the array can be reinitialized without any data
loss; however, the process may take several hours. Shutdown the system only by
momentarily pressing the front panel power button, or through the On-Screen user
interface.
Product Registration
Important: As the owner of new capital equipment, you will want to take advantage of product
information, enhancements, upgrades, or notifications issued by 360 Systems. Send in your
Warranty Card so 360 Systems can remain in contact with you. Mail or fax it to 360 Systems
offices in the USA at the address given below.
Product Improvements and Upgrades
360 Systems reserves the right to make changes and/or improvements to its products without
incurring any obligation to incorporate such changes or improvements in units previously sold.
Certain features mentioned in this document may not be present in all models. This product is not
offered for sale in all countries.
Trademarks
MAXX, Image Server, Multi-Format server, 360 Systems®, 360 Systems Broadcast and Bit-for-
Bit® are trademarks or registered trademarks of 360 Systems in the U.S. and/or foreign countries.
Other trademarks referred to in this document are the property of their respective owners.
Software Copyrights
Software in this product is based on the work of, or is copyright by, 360 Systems, SuSE®
GmbH, Trolltech, and FreeType Team. Copyright 2003-2009 by 360 Systems.
Video and Audio Copyright Reminder
It is illegal to use this product to make copies of copyrighted material without the express
permission of the copyright holder.
MAXX-2400HD Owner’s Manual
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
360 Systems’ MAXX-2400HD™ server is a four channel, high-definition video recorder/server
designed for broadcast, production, and Pro A/V applications. It can play four independent video
streams at once, and stores approximately 240 hours of JPEG-2000 encoded video1 with eight
audio channels per video stream. It occupies just 5¼” of rack space. The server’s extensive
feature set makes it an excellent choice for VTR replacement, broadcast automation, remote trucks,
corporate, educational, house-of-worship, and live entertainment presentations. MAXX-2400HD
can be operated at high definition line rates of 720p or 1080i.
Seamless Installation in New Facilities
The MAXX-2400HD smoothes installation in a new setting, providing both HD-SDI video and
composite monitoring outputs. Program file transfers are also available over Gigabit Ethernet. It’s
never necessary to add outboard encoders; premium-quality JPEG-2000 codecs are included as
standard equipment.
All professional audio formats are available with MAXX-2400HD. For surround sound, eight
channels of embedded audio are included.2 Optional multi-channel audio modules provide 8
channels of AES/EBU digital audio (Model DXP-1); and either 4 or 8 channels of +4 balanced
analog audio (Model AXP-3 and AXP-4).
MAXX-2400HD’s versatile video and audio I /O personality is unique among HD servers, and
guarantees a seamless fit in existing facilities, and as part of new build-outs.
Exceptional Storage Capacity
The MAXX-2400HD contains twelve 1-Terabyte drives in its compact enclosure, providing
240 hours of storage with exceptional image quality. Storage time varies proportionally at other
data rates, as illustrated in the chart below.
The server’s RAID-6 disk array provides a high level of security for stored program content, by
spreading parity information across all drives. It also helps keep the server in service, even in the
event two drives were to fail. The multi-drive array also helps generate the data rates required for
multiple streams of high definition video.
Capacity, net of
RAID-6
Time @ 50 Mb/s
365 hours
Time @ 80 Mb/s
240 hours
Time @ 100 Mb/s
200 hours
10.0 TB
MAXX-2400 STORAGE TIME VS VIDEO DATA RATE
1 At 80 Mb/sec data rate
2 Per video stream
Page 12
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatibility with Automation Controllers
MAXX servers work with automation controllers from many different manufacturers, accepting
VDCP, Odetics or BVW protocols for 9-pin control of each server channel. 360 Systems’ business
partners provide automation controllers for applications ranging from affordable systems for Pro-
AV, up to large-scale broadcast solutions. Contact a 360 Systems application engineer or an
automation provider for assistance with your requirements.
Remote Controls
Hardware accessories are available from third-party manufacturers to perform transport
control, instant clip replay, slow-mo, and automation. A table of tested controllers is provided
elsewhere in this manual. Contact 360 Systems Sales Support team for assistance with a specific
application.
The MAXX-2400HD server provides twelve GPI inputs for remote play, stop, and record
capability from push-button panels or other GPI-controlled equipment. Twelve outputs are also
provided; these may be used for command acknowledgement (to drive LEDs or logic inputs), or
they can output at specific times programmed within a Playlist that is resident on the server.
Better Images with JPEG 2000
JPEG-2000 has distinguished itself for visually lossless encoding of images, and almost
complete freedom from visual artifacts. It sets a new level of image quality for High Definition,
well-suited for production and broadcast. It’s a first choice for many new cameras and servers, and
its easy-to-edit I-frame format is accepted by an increasing number of NLEs. The MAXX-2400HD
runs at a wide range of video rates, making it an excellent choice for production, broadcast, and
even high-quality projection.
Audio Features
MAXX-2400HD provides most standard professional audio formats, making it an easy fit in a
new facility. Eight embedded audio channels are standard equipment for each video stream.
Analog audio is expandable to 4 analog channels with the AXP-3 module, and up to 8 analog
channels with the addition of an AXP-4 module. Eight channels of AES/EBU digital audio are
alternatively available with the optional DXP-1 module. Gold XLR connectors are standard for
audio inputs and outputs.
360 Systems brings extensive experience in broadcast and pro-audio to the design of video
servers. Their 24-bit word size delivers a 20 dB improvement in SNR (10 times) compared with
older 16-bit audio systems. Input circuits provide excellent hum and RF rejection, and 20 dB of
headroom. 360 Systems’ Bit-for-Bit® design strategy assures that Dolby®-E, Dolby AC3, or other
forms of encoded audio will be stored and played correctly.
MAXX-2400HD Owner’s Manual
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
The Graphic User Interface
The MAXX-2400HD incorporates a graphic user interface (GUI) which gives fast access to
every server function. It is controlled by a standard keyboard and mouse (supplied) and requires
only a VESA-compliant SVGA display. The full GUI is also available from remote workstations.
The GUI displays a control panel for each server channel; these include transport control, clip
management, head and tail trimming, and playlisting. The GUI can easily operate the server’s four
channels without the need for other equipment.
System configuration is clear and straightforward through the GUI. It provides access to
encoding parameters, audio options, and time-code settings. Whenever new server features are
installed, new set-up parameters and user-interface features become immediately available.
The server comes with Remote Workstation Software, which allows it to be remotely operated
from a standard PC over Ethernet; the GUI is replicated at each remote location. Separate work
areas can be easily created within a building for ingest, trimming, playlisting, system monitoring or
play-to-air.
File Transfers over Gigabit Ethernet
The MAXX-2400 goes beyond just base-band connections for video and audio. File transfers
over Gigabit Ethernet allow the transfer of video content across the room, or across the country, at
high speed and low cost. With Ethernet switches and broadband connections, the server’s design
enables low-cost networking of broadcast operations from ingest to storage, for editing, play-to-air
and archiving.
Reliability Counts
360 Systems has 37 years experience manufacturing equipment for television broadcast and
other industries that require elevated reliability. With more than 30,000 hard disk products in
service around the world, we understand quality, reliability, and protecting your stored content.
Page 14
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Features and Benefits
The MAXX-2400HD is designed from the ground up to deliver outstanding performance and
value as a high-definition broadcast server. Two inputs, four outputs, a Gigabit Ethernet port, and
multiple audio formats make it an excellent and affordable choice for the transition to high
definition.
ꢀ
ꢀ
ꢀ
Four simultaneous video outputs, or two input and two outputs
HD-SDI video inputs and outputs
Composite video monitoring outputs
ꢀ
ꢀ
ꢀ
ꢀ
Eight channels of embedded audio (standard)
Optional 4 channel analog audio input/output expander available (AXP-3, Channels 1-4)
Optional 4 channel analog audio input/output expander available (AXP-4, Channels 5-8*)
Optional 8 channel AES/EBU digital audio expander available (DXP-1)
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
12 Terabyte internal RAID-6 drive array for 240 hours of storage
Slow-Motion playback forward and reverse
Key-and-Fill playback
Targa file import via Ethernet
MOV file import and rendering
Serial control via VDCP, BVW or Odetics protocols
Compatible with leading broadcast automation systems
FTP transfers over Gigabit Ethernet
VITC (ATC) time code
Closed-Captions
Accurate head and tail trimming, and program segmenting
Advanced Playlisting: Build, edit, store, playback, and loop 4 simultaneous lists
Looping
Keyboard shortcuts for editing
Server control with familiar Graphic User Interface (GUI)
Remote Workstation Software creates up to four remote worksites
Compact 5¼” [133 mm] enclosure
Redundant power and cooling
Attractively priced
* AXP-4 requires AXP-3.
MAXX-2400HD Owner’s Manual
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Applications for 360 Systems Servers
The MAXX-2400HD adds value to many applications in broadcasting, cable distribution, video
production, Pro A/V, entertainment and sports. It provides immediate record and playback of any
source, lending a spontaneous appearance to broadcasts, presentations and live events.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
News Production – Promos, teasers, intros, news segments, graphics, animation
Play-to-Air server – Playback under automation control
Graphics server – Play TARGA files with key-and-fill (available Q2-2009)
Master Control – Program and commercial playout, station IDs, promos, teasers
Program Ingest – Automated capture of satellite, tape, microwave, and fiber feeds
FTP File Delivery – Deliver news, promos, spots over broadband lines
Program Store-and-Forward – Temporary storage for subsequent delivery
Commercial Insertion – Playout under automation control
Instant Replay – Hot Key playback of sports plays, news clips, stills, and graphics
Sports Shows and Events – Slow-motion playback, player bios, graphics, promos
Game Shows – Prizes, graphics, animations, promos
Talk and Variety Shows – Promos, teasers, intros, outros, graphics, animations
Award Shows – Nominees, categories, promos, graphics, animations
Theme Parks and Casinos – Playout for show backgrounds, event lists, kiosks
Houses of Worship -- Projection displays, program production, broadcasting
Colleges and Universities – On-campus networks, production, presentations
Digital Signage – drive projectors, flat-panel displays, kiosks
Entertainment Industry – Road show displays, projection
Mid-market Broadcasting – High performance at an attractive price
Synchronized two-channel playback for 3D video
Page 16
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Information
AXP-3 Multi-Channel Analog Audio Module (optional – provides channels 1-4)
Provides 4 analog audio outputs for each of 4 server video outputs, and 4 analog audio inputs.
+4 dBu balanced on XLR connectors. Redundant power supply. 3½” [88 mm] height.
AXP-4 Multi-Channel Analog Audio Module (optional– provides channels 5-8)
Provides 4 analog audio outputs for each of 4 server video outputs, and 4 analog audio inputs.
+4 dBu balanced on XLR connectors. Redundant power supply. 3½” [88 mm] height.
Requires AXP-3.
DXP-1 Multi-Channel Digital Audio Module (optional)
Provides 8 AES/EBU digital audio outputs for each of 4 video streams, and 8 AES/EBU inputs on
XLR connectors. Redundant power supply. 3½” [88 mm] height.
Maintenance Spares
360 Systems is committed to keeping your server on air. Having spare parts on hand in the
event of a fault is a good practice in broadcast and other high-reliability applications. Hard disk
spares are particularly important. Please consider these options at the time of your purchase, or
shortly after.
•
•
1-TB server-grade hard drive
MAXX-2400HD plug-in power supply module
MAXX-2400HD Owner’s Manual
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Unpacking
Your server has been carefully inspected and calibrated before shipment to allow immediate
operation upon installation. Check all items for signs of visible damage which may have occurred
during shipment. If any item is damaged, contact the carrier to file a claim.
Keep the packing materials in the event that a unit must be returned. If the original packaging
is not available, due to the product’s weight it should be professionally packed for shipment, with
particular attention to protecting the corners.
CAUTION!
The MAXX-2400HD server weighs more than 90 pounds [40 kg]. Always use safe two-man lifting
techniques when handling it.
Package Contents
Confirm that all items on the packing list have been received. Contact 360 Systems if any
item is missing.
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
MAXX-2400HD server
Keyboard
2-Button Scroll Mouse.
Software CD-ROM (backup copy)
Remote Workstation Software CD
CXP serial control and GPI module
CXP interface cable
Rack Mount Hardware Kit
Operations Manual and Warranty Card
Power cords (2)
STOP
Before unpacking hard drives, refer to the following sections on RACK MOUNTING (Page 19) and
INSTALLING THE HARD DRIVES before unpacking the drives.
The server is not shipped with a video monitor. Select a VESA-compliant CRT or LCD monitor
with a minimum refresh rate of 75 Hz.
Page 18
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Installation Notes
System Cooling
When many pieces of equipment are mounted in an equipment rack, a considerable amount of
heat may be produced, which must be removed efficiently. Further, a lower operating
temperature will make equipment operate more reliably, and it will last longer. In the extreme
case, excessive temperatures cause rapid equipment failure, and damage which can be difficult
to repair.
Heat in an equipment rack must be removed by forced air. This is often accomplished by
blowers installed in the top of the rack, venting into the room. An alternative is to draw hot air
from the top of the rack into an air-conditioning return duct, and not vent it into the equipment
room. Cold air should be ducted into the bottom of the rack.
The optimum air temperature for cooling electronic equipment is 25° C (72° F). When many
pieces of equipment are contributing to the heat load, a substantial air-flow will be needed, and
the inlet temperature may need to be lower.
Check These Points
•
•
•
•
•
Are the ventilation holes in the server free of obstruction?
Can blowers or HVAC system adequately remove heat from the equipment rack?
Have you measured the actual temperature inside the rack? Do this near the top.
Verify that the HVAC system is not on a timer that can shut off on weekends or holidays.
What procedures are in place to protect the equipment when the HVAC system fails?
Power Conditioning
It is good practice to operate an on-air video server from an Uninterruptible Power Source, or
UPS. All utility power systems experience occasional transient events, including brownouts
and dropouts, which are capable of taking a server off the air. It is the station operator’s job to
plan for and overcome such contingencies.
UPS units suitable for smoothing short-term power line problems come in two varieties:
Change-over UPS Design
This design senses drop-outs and low line voltage, and switches its output to an internal
inverter operating from a battery. This UPS is low in cost, and is most often used in non-critical
applications such as desk-top computers. A disadvantage is that it may create its own power
transients when switching between utility power and its inverter supply. For this reason, 360
Systems does not recommend this type for use with a broadcast server.
MAXX-2400HD Owner’s Manual
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Continuous Conversion UPS Design
This improved design, sometimes called ‘double conversion’ continuously converts utility
power to DC, stores it in a battery, then produces isolated AC power from an inverter. It never
switches back and forth to utility power, and has better immunity to input transients,
brownouts, and blackouts. Models are available with batteries of almost any size, making the
continuous-conversion UPS suitable for transient suppression or long-term operating power in
the absence of utility power.
Recommended UPS Models
The following makes of continuous conversion UPS systems can be considered for use with
360 Systems’ server products:
APC Smart-UPS 2200-XL
Eaton/Powerware Corporation, Model 9125, www.powerware.com. This product is available in
several configurations to accommodate different current load and power failure support times.
The minimum requirement for the MAXX-2400HD server is 3 amps.
Server Operating Environment
A video server is the most critical element in a broadcast operation. Its installation should
safeguard it from every external event that can interfere with it doing the task expected of it.
360 Systems’ engineers have experience with thousands of installations, and have become
aware of a number of environmental factors that can adversely affect performance. Two of
these have already been discussed: power conditioning and inadequate cooling. Two others,
less obvious, should also be considered:
RF Interference by Cell Phones
Many people are not aware that cell phones produce a very high instantaneous power output,
even when no conversation is taking place. You may have experienced the effect of a cell
phone interfering with a common desk phone placed nearby. Carrying a cell phone into a
machine room where it is in close proximity to broadcast equipment and its associated wiring
is unwise. Cell phones can interfere with serial control commands, video synchronization, and
in some cases can crash the CPU in equipment.
Some major broadcasters prohibit the presence of cell phones in certain equipment areas. 360
Systems believes that the risk of undesired equipment behavior from their RF fields is very real.
Page 20
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Static Discharge
Static electricity discharge is accepted by most people as an inevitable consequence of living in
a dry area. It is also a result of floor coverings that may enhance appearances, but are
inappropriate for use around critical broadcast equipment. Static discharge can do two adverse
things:
•
•
Discharge into a connector can—and will—destroy internal circuitry of equipment. The result
will usually be difficult to diagnose.
Discharge to equipment frames or wiring can crash a CPU and take the station off the air. The
event may seem random or unrelated to static, but it is clearly a catastrophic event—and one
that can repeat indefinitely.
Several steps can be taken to protect equipment from static discharge:
•
•
•
•
Do not install critical broadcast equipment (video servers) in a room with carpeting.
Connect equipment racks directly to the utility safety ground with a heavy copper conductor.
Do not operate equipment which has a lifted safety ground (green frame ground wire).
Consider installing a humidifier to reduce the likelihood of static discharge.
About Server Software
The MAXX-2400HD is shipped with its application programs and operating system installed.
The first time that it is started, it must be connected to a keyboard, monitor and mouse. The
server will ask you to accept the Software Licensing Agreement before it will operate. This
screen will only appear during the initial startup. Refer to the Maintenance chapter of this
manual if it becomes necessary to reinstall software.
MAXX-2400HD Owner’s Manual
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Rack Mounting
CAUTION!
It is strongly recommended to rack mount the MAXX-2400HD before installing the drives. This will
reduce the weight significantly, and simplify the mounting process.
In North America, the rack slide rails will be mounted in a 19” rack enclosure having 10-24 or
10-32 tapped holes. In countries with metric standards, the user will need to supply appropriate
fasteners.
Install the included rack mount slide rails in the rack. They must be securely mounted at both
the front and back of the rack. Extend the slides in the slide rails. Carefully mate them with the rails
on the sides of the MAXX-2400HD – this process requires at least two people unless an adjustable
lift is available. Slide the MAXX-2400HD into the rack.
Deploy the front panel to expose the rack screw slots. Unscrew the knurled fasteners and pull
forward and down to deploy the front panel. Fasten the MAXX-2400HD into the rack using
appropriate flat-head screws (#10 Phillips screws provided in North America). Retract the front
panel. Tighten the front panel access screws.
Cables attached to the rear of the MAXX-2400HD should be supported. Do not suspend
substantial cable weight from the server.
Mounting an Audio Module (AXP-3, AXP-4 or DXP-1)
An optional multi-channel audio module may also be rack mounted above or below the
MAXX-2400HD, on the front or rear of the rack. Four elongated screw holes are provided to
facilitate rack mounting of the AXP Module. Audio modules are connected to the server with the
supplied 68 Pin cable. Connect one end to the mating connector on the rear of the audio module.
Connect the other end to the rear panel of the server.
Mounting the Control Module (CXP)
The supplied CXP module may also be rack mounted above or below the MAXX-2400HD, on
the front or rear of the rack. Four elongated screw holes are provided to facilitate rack mounting of
the CXP Module. The CXP module is connected to the server using the supplied 68 Pin cable.
Connect one end of the cable to the mating connector on the rear of the CXP Module. Connect the
other end to the rear panel of the server. Refer to Figure
connecting GPI and automation signals to the CXP Module.
5
on page 28 for information about
Page 22
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Monitor, Mouse and Keyboard
The MAXX-2400HD is not shipped with a video monitor. Select a VESA-compliant CRT or
LCD monitor with a minimum refresh rate of 75 Hz. Note that the MAXX-2400HD may not start
correctly if an unsuitable monitor is connected. Connect the monitor to the VGA port on the rear of
the unit. Refer to Figure 2 on Page 24
Connect the keyboard to the PS-2 keyboard port on the rear of the unit; connect the mouse to
the mouse port. Refer to Figure 2 on page 24. NOTE: If the mouse and keyboard connections are
interchanged, the MAXX-2400HD may not boot up properly. Be especially careful about this
when using extender cables.
If you own more than one MAXX-2400HD, it may be appropriate to use a single keyboard,
monitor, and mouse with a KVM switch to select between servers. Not all KVM switching systems
are compatible. The KVM switch must supply an active signal to the server at all times, even when
switched away from it. When first powering up the MAXX-2400HD, use only the supplied
keyboard and mouse directly connected. Then test the KVM switch system that will be used
thoroughly before installation is completed.
Installing the Hard Drives
MAXX-2400HD uses twelve 1-TB drives in its 12 Terabyte RAID 6 array. These are packaged
in a separate carton inside the main carton. The drives are fully configured and ready to run the
MAXX-2400HD application. It is important that the drives be installed in the correct positions in
the RAID array. Each drive has a number affixed to its packaging material. Install each drive in the
corresponding numbered bay according to Figure 1.
Open the drive bay door by loosening the knurled screws and pulling lightly forward and down.
Install each hard drive in the corresponding numbered slot as follows:
1. Open the blue locking lever by pulling forward slightly
2. Insert the drive in the bay by sliding it in till you feel it “seat”
3. Close the locking lever.
Figure 1 - Drive Bay Organization
MAXX-2400HD Owner’s Manual
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel Connections
Figure 2 indicates the Rear Panel connections on MAXX-2400HD. Each connection is
described briefly in the following text. Make all connections appropriate to other equipment before
applying power to the MAXX-2400HD.
Figure 2 - Rear Panel Detail
Rear Panel Connections to the MAXX-2400HD Server
Mouse
Keyboard
USB (do not connect)
CXP Interface Connector
RS-232 Serial Port (do not connect)
VGA Monitor
NET 1 - Gigabit Ethernet
NET 2 - not used
Channel 1 and 2 HD-SDI Inputs (bi-directional)
Channel 1, 2, 3, 4 HD-SDI outputs
Channel 1, 2, 3, 4 - CVBS monitoring outputs
Channel 1 LTC Input
Channel 2 LTC Input
LTC Output
Genlock Input
Audio Module Connector (AXP or DXP)
Page 24
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
HD-SDI Video Inputs
The MAXX-2400HD records Digital video on channels 1 and 2. It has separate BNC inputs for
HD-SDI (serial digital per SMPTE 292M). HD-SDI inputs have a fixed 75-ohm termination.
HD-SDI Video Outputs
Channels 1, 2, 3 and 4 have HD-SDI video outputs per SMPTE 292M.
CVBS Monitor Outputs
Channels 1, 2, 3 and 4 have letterboxed composite video monitoring outputs.
Genlock Sync Reference
The MAXX-2400HD is designed to be referenced to an external genlock source in the form of
RS-170 black. The GENLOCK input provides a fixed 75-ohm termination. An internal crystal
reference is also provided so that the server can be used as a stand-alone player.
Gigabit Ethernet Port
A Gigabit Ethernet port is provided on the MAXX-2400HD. The NET 1 port is intended for
external transfer of program content between video servers. The NET 1 port is also used for remote
control using the optional Remote Workstation software. The NET 2 port is reserved for future use
and is not active. Use only the NET 1 port.
LTC Time Code Input
An LTC time code input is provided for Channel 1 and Channel 2. The LTC input provides a
>10k ohm termination. This input may be selected by means of the On-Screen user interface and
recorded as a time code reference. This input may be selected by means of the On-Screen user
interface and used as a start time reference. Note that time code is not actually recorded, the time
code read at the start of recording is captured. When the clip is played back, the time code (in
display, VITC and LTC outputs) starts from the captured time and proceeds continuously.
LTC Time Code Output
An LTC time code output is provided on the LTC OUT BNC connector. It may be selected by
means of the On-Screen user interface to output time code from any of the four video channels
during playback. The LTC output has a source impedance of <5 ohms.
Keyboard
Attach the alphanumeric keyboard to the purple 5-pin KEYBD connector to control the server
and manage clips with the On-Screen graphic user interface. The server will only recognize the
keyboard if it is attached before power up.
Mouse
A two-button scroll mouse is provided with the MAXX-2400HD. Plug the mouse into the
green 5-pin MOUSE port. Do not use the USB ports, even if the supplied mouse is USB capable.
Note that the server will only recognize the mouse if it is attached before power up.
Monitor
A VESA-compliant computer monitor may be connected to the 15-pin VGA video port. The
MAXX-2400HD resolution is fixed at 1024 x 768 pixels, with a refresh rate of 72 Hz. This is best-
MAXX-2400HD Owner’s Manual
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
viewed on 17-inch or larger monitors. 360 Systems does not provide monitors for the server. Do
not use older monitors that are not VESA compliant. The server will not start properly if an
unsuitable monitor is connected.
Serial Port
The rear panel serial port is not used. Make no connection.
USB Ports
The rear panel USB ports are not used. Make no connection.
Power Switch (not shown in Figure 2)
Shutdown the system only by momentarily pressing the front panel power button, or through
the SHUTDOWN command on the On-Screen user interface.
PRESSING THE FRONT PANEL POWER BUTTON FOR FOUR SECONDS WILL FORCE A
SHUTDOWN. USE THIS METHOD ONLY IF THE UNIT IS NOT RESPONDING.
Page 26
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Module Connections
The AXP-3, AXP-4 and DXP-1 multi-channel audio modules provide for connection of audio
equipment. Each is a 2-rack space module. Connection is made to the rear panel of MAXX-
2400HD using a 68 pin cable. Figure 3 indicates the audio module’s connectors and their
functions.
CAUTION!
Do not plug an audio module into the CXP connection. Damage to the system may occur. The
audio connector on the MAXX-2400HD is clearly marked. Connect according to Figure 3. Be
certain it is properly connected before applying power.
Connect Audio Module Here
Figure 3 – Audio Module Connection to MAXX-2400HD
Control Module (CXP) Connections
The CXP Module provides connections to the server’s serial ports and its GPI interface using a
68 pin cable. Connect it between the back of the CXP module and the CXP port on the back of the
server. Note that there are two cables supplied for initial connection.
CAUTION!!
Do not plug the CXP Module into the AXP audio module connection on the server. Damage to the
system may occur. The CXP connector on the MAXX-2400HD is clearly marked. Connect the CXP
module per Figure 4. Be certain it is properly connected before applying power.
MAXX-2400HD Owner’s Manual
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 4 - CXP Connection to MAXX-2400HD.
Serial Control Ports for Channels 1, 2, 3 & 4
Each of the four 9-pin “D” connectors on the CXP module provides independent control of the
four video channels. They accept serial commands in VDCP, BVW or Odetics protocol. The
multiple serial ports allow simultaneous connection of an automation controller and a desktop
controller. See the chapter on Automation Control for further details.
Most broadcast automation systems and some remote control panels employ VDCP protocol.
Many controllers used for transport, instant replay, and edit control employ BVW or Odetics
protocol.
Figure 5 - CXP Module Connectors
GPI Control
The MAXX-2400HD provides twelve GPI inputs for control of machine functions, which
appear on two 25-pin GPI connectors. This “General Purpose Interface” can be connected to
switch contacts or to an open-collector transistor output. GPI inputs are programmable, and can
provide machine control such as PLAY, STOP, or RECORD through simple external switches.
The MAXX-2400HD also provides twelve GPI outputs which may be used to confirm that a
command has been received, or for other purposes. The function of these open-collector outputs is
programmable; they may be used to operate an LED, or they can drive a suitable logic input. The
pin-out for the GPI connectors will be found in APPENDIX A.
Page 28
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
This section introduces the Graphic User Interface (GUI), its menus and operating controls. If
you want to skip ahead to learn how to record a clip, go to page 39. Skip to page 46 to read about
playing a clip.
The graphic user interface is the primary way to manage server operations. With it, you can
control recording and playout, set up video and audio formats, map remote control ports to video
channels, perform editing and make playlists.
The GUI is operated with a keyboard, mouse, and monitor connected to the server rear
panel. During the first power on the system must be connected to a keyboard, monitor and
mouse. The server will ask you to accept the Software Licensing Agreement before it will operate.
This screen will only appear during the initial startup.
The Server Desktop
The server desktop is similar to many computer graphic interfaces. A task bar and start menu
appear at the bottom of the screen. Use the Start menu button to launch applications, manage the
system or to shut down the server.
Launching the Graphic User Interface
The GUI launches automatically during start up. If it has been closed, click Start, then
Image Server GUI to re-launch it. The GUI window can be moved or minimized as desired.
Shutting Down the Server
Click Start, then Shutdown, then select either Shutdown to begin an orderly shutdown, or
Full Restart to do an orderly shutdown and restart (without a full power down).
Alternatively, momentarily pressing the front panel power button will cause the system to
begin an orderly shutdown. The server will acknowledge the button press with an audible beep and
the front panel lights will begin to flash together. Any operation in progress will be halted, and any
unsaved work will be lost.
In most cases the power will shut off automatically. However, if the front panel lights begin
to blink, it means that the file system has been properly closed, and it is safe to force the power off
by holding the front panel button in for 4 seconds.
If the system has stopped responding to commands and will not reset by pressing the front
panel button, press and hold the button for four seconds to force a power down. Wait 5 seconds,
and then the system may be restarted with another press of this button.
DO NOT disconnect AC power to shutdown the server. Doing so may cause loss of unsaved
data, and may require the RAID drive array to re-synchronize – a process that could take several
hours. Shutdown the system only by momentarily pressing the front panel power button, or through
the GUI.
The Quick Restart option in the Start>Shutdown menu allows the GUI and video
playback application to be restarted without restarting the entire operating system.
The Restart FTP Only option will restart the FTP service without affecting video operation.
MAXX-2400HD Owner’s Manual
Page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Graphic User Interface Overview
Once the server has successfully powered up, the VGA monitor will display the GUI of Figure 6.
This view provides:
•
•
•
A main System Menu bar for configuration operations
A Status Bar that displays various system messages
Four VTR-like transport controls, one for each video channel
Figure 6: Graphic User Interface with Clip Transport Windows
When using the mouse, all buttons of all channels will operate immediately, without first
selecting a window to activate it. (Channel 3 is active in the illustration above, indicated by its blue
title bar.)
When using key commands, the active window is the only transport that will respond. Use the
CTRL+TAB key combination to change the active window in rotation, or use the mouse to activate
the desired window by clicking anywhere in it.
Windows can be moved, resized and overlapped by dragging the title bar, window edges, or the
resize tab at the lower right corner of a window. The CTRL+TAB key combination will also place
the activated window in front of all other windows.
Page 30
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu Bar
The System Menu bar contains four menus: Show, Edit, Windows and Help.
Show Menu
Contains selections for the four Channels and the clip management windows.
Channel 1
Channel 2
Channel 3
Channel 4
Opens the specified window if it is closed, brings it to the top and activates it.
Key Commands – F1, F2, F3, F4
Clip List
Opens the Clip Navigator window if it is closed, brings it to the top and activates it. See page 57.
Key Command – Ctrl+L.
Find Clips
Opens the Clip Locator dialog. See page 57.
Key Command – Ctrl+F.
Edit Menu
Contains a single selection, Configuration. This opens the main System Configuration dialog.
See page 51.
Windows Menu
Choices in this menu change the way the windows are displayed. Use the CTRL+TAB key
combination to change the active window in rotation, or use the mouse to activate a specific
window.
Cascade
Arranges all open windows so that they are overlapping, but offset. It is useful as a starting
point to rearrange the windows. This choice is especially useful with small monitors.
Tile
Arranges all open windows so that each is fully visible. This choice is especially useful with
larger monitors. In case Windows do not tile as expected, select Cascade to restore their
original size and order, then select Tile.
In addition, there are selections for each open transport window. Selecting one of these brings that
transport to the top of the display and makes it the active window.
MAXX-2400HD Owner’s Manual
Page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Help Menu
Contains a single item, About, which displays the server software versions, serial number and
Unit ID.
The Status Bar
A status bar appears at the bottom of the window that provides system information including
GENLOCK, VIDEO INPUT DETECTED, and TIME REMAINING—PERCENT FULL. Messages such as CONNECTED
TO HOST or CONNECTION TO HOST REFUSED are also displayed as diagnostics. Error and status
messages from the RAID system can also be displayed here.
Channel 1 and 2 can Record or Play video content. Channels 3 and 4 only play content. All channels
may be used at the same time.
Each channel can be controlled in two different views.
•
•
The Transport View
The Playlist View
Page 32
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The Transport Channel View
The Transport Channel View is shown in Figure 7. This is the default view of each channel.
Basic transport operations such as play, stop, record, and head/tail trimming appear in the Clip
Transport window for each channel. These operate in familiar VTR fashion.
Figure 7 - Transport Channel View
Transport Menu Bar
There are two menus, File and Options.
File Menu
New
Channel 1 and 2 only. Opens the Clip Navigator to allow naming of a new clip, then prepares
channel 1 or 2 for recording. See page 37.
Key Command – Ctrl+N.
Open
Opens the Clip Navigator to allow choosing a clip to load into the transport.
Key Command – Ctrl+O.
Save
Saves an edited clip using its existing file name.
Key Command – Ctrl+S.
MAXX-2400HD Owner’s Manual
Page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Save As
Opens the Clip Navigator to allow saving an edited version of the clip with a new name. This
allows making alternate versions of a clip or making multiple segments of a master clip.
Key Command – Ctrl+A.
Playlist
Close
Switches from Transport View to Playlist View.
Closes the Transport window. This has the same effect as the Close box in the upper right
corner of the window. Note that this will not stop playback or eject a loaded clip.
Options Menu
This menu contains two selections.
Take Control
Takes control of the video channel from another user (the Serial Control, a Remote
Workstation, or if you are using a Remote Workstation possibly the local GUI.) This item is
grayed out when the window has control.
Key Command – Ctrl+T.
Configure
Opens the video channel’s Configuration dialog. See pages 37.
Key Command – Ctrl+C.
Page 34
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playlist Channel View
The Playlist Channel View is shown in Figure 8. This view allows multiple clips to be loaded in a
playlist for sequential playout.
Figure 8 - Playlist Channel View
Playlist Menu Bar
There are two menus, File and Options.
File Menu
Open
Opens the Clip Navigator to allow choosing a clip to load into the transport.
Key Command – Ctrl+D.
Append
Opens the Playlist Selection dialog to allow choosing a Playlist to Append to the currently
loaded list. This can be done while playing to allow continuous playback of new Playlists.
See page 66.
Save
Saves an edited Playlist using its existing file name.
Key Command – Ctrl+S.
MAXX-2400HD Owner’s Manual
Page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Save As
Opens the Clip Navigator to allow saving an edited version of the clip with a new name.
This allows making alternate versions of a clip or making multiple segments of a master clip.
Key Command – Ctrl+A.
Rename
Opens the Playlist Selection dialog to allow renaming the currently loaded Playlist.
Transport
Switches from Playlist View to Transport View.
Eject
Ejects the currently loaded Playlist in preparation for creating a new one. (It is not necessary
to Eject a list to load another saved list.)
Key Command – Ctrl+N.
Close
Closes the Playlist window. This has the same effect as the Close box in the upper right
corner of the window. Note that this will not stop playback or eject a loaded list.
Options Menu
This menu contains two selections:
Take Control
Takes control of the video channel from another user (the Serial Control, a Remote
Workstation, or if you are using a Remote Workstation possibly the local GUI.) This item is
grayed out when the window has control.
Key Command – Ctrl+T.
Configure
Opens the Playlist’s Configuration dialog. See page 65. Note that this is different than the
dialog for the video channel setup, which must be accessed from the Transport View
window.
Key Command – Ctrl+C.
Page 36
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial System Configuration
Selecting a Sync Reference
In many applications, this server and downstream equipment connected to it must be referenced
to a common genlock source (SMPTE 170M or ITU-R-BT.470). A BNC connector is provided on the
rear panel to receive a genlock signal. It has a 75-ohm termination.
An internal crystal reference is also provided so that the server can be used as a stand-alone
player, and also for convenience for testing. Use particular care when operating the server with an
internal reference, as synchronization with other equipment may not be possible. Systems that
incorporate retiming circuitry in the router or video switcher may not require referencing.
Note that the input sync for recording is derived from the input itself. The E-E output is
synchronized to the input as well, so it is not possible to time the E-E output to gunlock.
Setting the Video Sync Source
To use with a genlocked system, select External Sync using the GUI as follows:
A.
From the main menu bar select EDIT->CONFIGURE. Select the TIMING option. The
screen of Figure 9 appears.
B.
C.
Select EXTERNAL as the sync source.
Check that the front panel GENLOCK LED is now illuminated and the word
GENLOCKED now appears in the bottom right of the main GUI window.
Genlock Signal Quality
A genlock signal for the server must conform to one of the standards listed in the Technical
Specifications. An unstable genlock source may result in unwanted artifacts in the video output .
To use in a non-genlocked system, follow the instructions above but select INTERNAL Sync.
The input to the server uses the input signal itself as a reference, this allows recording any signal
that conforms to the currently selected video format and frame rate. No configuration is
required to use this feature.
MAXX-2400HD Owner’s Manual
Page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Video Format
The MAXX-2400HD can record and play video in four high definition video formats:
1080i @ 59.94 Hz
720p @ 59.94 Hz
1080i @ 50 Hz
720p @ 50 Hz
To select a video format, go to Edit/Configure/Timing dialog on the GUI. Select a check-box for the
rate at which you will record or play. A reminder will appear, to stop video on all channels and
prepare for automatic restart in the new format. This takes at least 12 seconds, so the change should
not be performed on-air.
Figure 9 – Selecting Video Format
The MAXX-2400HD must be set to operate in one format at a time; it does not play mixed
video formats when the video format is changed, the only files visible on the GUI will be those
recorded in the currently-selected video format. Files in another format will become visible when the
server is placed in that operational mode. . For clarity, it is a good idea to store content in directories
that are separated according to video format.
Audio is recorded and played at the industry standard of 48K, regardless of the video format
selected.
Page 38
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Recording from the GUI
Video recordings are made using the Transport View of Channel 1 or 2. These channels can
record or play clips, but not both at the same time. Channels 3 and 4 are playback only. The
following steps are used to make a recording. Most configuration settings can be skipped once a
workflow is established. Channel 1 is used below as an example; all instructions apply equally to
channel 2.
Record Configuration Options
If necessary, set Channel 1 and/or Channel 2 to the Transport View. Click FILE->TRANSPORT
in the Playlist View to switch to the Transport View.
Setting the Video Bit Rate
Select OPTIONS->CONFIGURE from the Channel 1 Transport Window. The Dialog box in Figure
10 appears.
•
In the window, enter the desired Video Bit Rate (in Megabits/sec), not to exceed 125.
Alternatively, use the up/down arrows to set a number.
•
Click APPLY or OK.
Figure 10 - Channel Configuration Dialog
MAXX-2400HD Owner’s Manual
Page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Audio Input Source
Select OPTIONS->CONFIGURE from the Channel 1 Transport Window. The Dialog box in Figure
10 appears.
•
•
Select an Audio Input by clicking the desired button.
Click APPLY or OK.
Embedded audio is eight tracks contained in the HD-SDI video stream.
AES/EBU Digital Audio refers to audio input from the optional DXP-1 multi-channel module.
Analog Audio refers to audio input from the optional AXP-3 and AXP-4 multi-channel module.
Arming Audio Tracks
Select OPTIONS->CONFIGURE from the Channel 1 Transport Window.
Refer again to Figure 10 - Channel Configuration Dialog. Under TRACK ARM, Check AUDIO if
recording audio is desired. All eight tracks are recorded.
Click APPLY or OK
Setting an Audio Delay Time
Audio tracks can be offset from video in 1 millisecond increments up to +/- one second. The setting
is per channel and non-volatile. It applies to playback only, not recording.
You must stop and start the playback to hear the result of a change. This adjustment is made in
Transport mode; once set it also applies to Playlist mode on that channel.
Select OPTIONS->CONFIGURE from the Channel Transport Window. The Dialog box in 10
appears.
Click the OUTPUT tab.
Enter a time offset value in the window.
Click APPLY or OK.
Page 40
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 11 - Audio Delay Time Offset
Audio Rate Conversion
•
Converting the sample rate for audio applies only to AES/EBU digital audio. It is not relevant to
analog audio, or Embedded audio. Select OPTIONS->CONFIGURE from the Channel 1
Transport Window. The dialog box in Figure 5 appears.
•
•
Check a box under Audio Rate Conversion only if the corresponding AES/EBU audio source is
not a video-referenced 48K sample rate (as with wild audio or 44.1K audio).
Click APPLY or OK.
Bit-for-Bit® Recording & Playback
Dolby®-E, Dolby Digital (AC-3) or other forms of compressed audio require that on playout, the data
stream be identical to the original. Do not use the audio sample rate converters when working with
these encoded audio formats. Further, the Dolby® encoder must be supplied with the same video
reference as the HDSDI input to the server.
Audio Output Sync Reference
The audio sample rate is derived from the selected video sync reference. Audio is recorded at a 48K
sample rate, so the 0.1% pull-down for 59.94 Hz video is taken into account when generating the
sample rate.
MAXX-2400HD Owner’s Manual
Page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting VANC Line Selections
Select OPTIONS->CONFIGURE from the Channel 1 Transport Window. The Dialog box in Figure
10 appears.
•
Check the VANC box if Vertical interval ANCillary data (VANC) is to be recorded along with
video.
•
The VANC line selection data entry box will become active. Enter desired line numbers,
separated by a comma. Ranges can be specified with a dash, such as “9-12”. Lines 9,10 11 and
12 will be included.
•
•
In 720p, enter up to 12 lines. In 1080i, enter up to 6 lines. The six lines will be recorded in both
field 1 and the corresponding lines in field 2.
Click APPLY or OK.
Selecting a Time Code Source
This high-definition server utilizes the time code standard specified in SMPTE 12M-1, and
applies it as described in SMPTE 12M-2. It is suggested that the user refer to these documents, as HD
time code differs significantly from standard definition methods.
•
This function selects the source for time code for new recordings. The time code value obtained
from the selected source will be applied from the beginning of a recording.
•
Select OPTIONS->CONFIGURE from the Channel 1 Transport Window. The Dialog box in
Figure 10 appears.
•
•
The default Time Code Source is MANUAL. Alternatively, ATC-VITC time code may be selected.
For MANUAL, enter a time value in the window for the first frame of the recording. Use the
HH:MM:SS:FF format. It is not necessary to enter the colon ( : ) between digit pairs.
•
Click APPLY or OK.
Beginning Recording
When the setup steps outlined above are complete, you are ready to record. Place Channel 1
in the Record Ready mode as follows.
There are two approaches to starting a recording: “named recording” and “crash recording”.
You can name the clip first, then press Record; or just start recording, and let the system generate a
clip name automatically. The clip may be renamed as desired when the recording is complete. The
advantage of the first approach is that when the recording is complete, it is fully identified and ready
for use; the second approach is valuable for live action such as sports, where there is no time to lose
and action must be captured at once.
Clip names for crash recordings are of the form “new MMDD_N”, where MMDD represents
the month and day of the recording, and N is the lowest non-zero number that does not cause the
name to conflict with any previously made recording.
Page 42
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Crash Recording
Press Record whenever Channel 1 reports that it is IDLE.
Making a Named Recording
A.
From the Channel 1 Transport Window, Select FILE>NEW. The dialog of Figure 12 appears.
Figure 12 - Channel 1 Clip Navigator "New" mode
B.
C.
Enter a clip name using the keyboard. Up to 31 characters may be used. Spaces are allowed;
however, some characters other than upper or lower case letters and numbers may not be
used. These characters will not enter into the name field when typed. They include * ( ) + = ;
: ‘ “ < > , . / and ? A list of existing clips will appear in the large window, and can be used as
a name reference when creating new clip names.
The Channel 1 transport Window will display the words IDLE CUEING for two seconds or
less. When ready to record, the Channel 1 Transport Window will display IDLE READY.
Note: File naming is case sensitive. Upper case letters sort before lower case. The name FILE sorts
in the order shown, based on differing capitalization: FILE, File, fiLe, and file. When using the
server with automation systems or other remote controls, it is not a good practice to distinguish files
only by differences in case.
MAXX-2400HD Owner’s Manual
Page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 13 - Channel 1 Ready to Record
D. Click the RECORD button at any time to begin recording. The yellow time display counters
will update the clip duration continually.
E.
To stop recording, click STOP.
Note: An in-progress recording must be 2 seconds long before it will appear in the clip list. Hitting
the STOP button to end the recording after less than 2 seconds will also cause the clip to appear in
the clip list.
Monitoring a Recording Source with E-E Mode
The E-E button appears in the Channel 1 and Channel 2 Record/Play window. It allows the
input signal to be monitored from the server output. E-E Mode toggles automatically as described
below, but can also be switched manually at any time.
When a new clip is created for recording, the input source is automatically switched ON to
the output—an E-E connection. When a clip is opened for play on Channel 1 or 2, E-E monitoring is
switched OFF.
When Channel 1 or 2 is switched to playlist mode, the E-E monitor is switched OFF. E-E mode
cannot be toggled while the channel is in playlist mode.
When E-E is ON, the input video signal is routed to the outputs. Manually toggle the E-E
mode button OFF to switch the output to the servers output, for conventional playback operation.
Page 44
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Under automation control, Auto E-E behavior is slightly different than under GUI control. The
server will remain in E-E ON mode until a transport control command (Play, Stop, Jog, etc) is received.
After receiving such a command, the server will remain in E-E OFF mode until record mode is
entered. In record mode, E-E mode is ON. As with GUI operation, automation controllers may send
E-E ON and E-E OFF commands to override the automatic operation.
Note that when in E-E mode the video outputs are not timed to the genlock signal. This will not
be noticeable when connected directly to a monitor. However, there may be timing offsets when
feeding timed routers or switchers. The symptoms of this will vary depending on the particular
equipment, including horizontal picture shift or timing error indications. If the input is not
synchronous with genlock, it may roll vertically. E-E mode is not intended to be used on-air, only as
a production tool.
MAXX-2400HD Owner’s Manual
Page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Clip from the GUI
Video Playback can be done on all four channels, individually or simultaneously. The record-
capable channels (1 and 2) can record or play, but not both at once. Follow these steps to play a clip:
Beginning Playback
1. Select FILE>OPEN from the Transport Window of Channel 1, 2, 3 or 4. The Clip Navigator
shown in Figure 14 appears.
2. Navigate the folder structure if necessary by clicking on the folders.
3. Select the clip to be play by double-clicking it.
4. When the Transport Window indicates Idle Ready, the clip can be played by clicking PLAY.
Figure 14 – Channel-1 Clip Navigator in “Open” Mode
Looping a Clip
Clicking on the LOOP checkbox in the Transport View will cause a clip to loop until LOOP is
unchecked, or until STOP is clicked. LOOP may be checked or unchecked before or during
playback, but must be changed at least 2 seconds before the end of clip to take immediate effect.
Pausing a Clip
Click PAUSE at any time to pause a clip. Click again to resume. The PAUSE button is the same
key as the PLAY button.
Page 46
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Ejecting a Clip
Ejecting a clip effectively removes it from the transport. The channel will output Black. Press
EJECT to eject a clip.
Using Jog
The JOG + command will move to the next frame and go to Still. The JOG– command will
move to the previous frame and go to Still.
Using GO-TO
|
|
Click the arrows < or > to go to the next trim point (Mark In or Mark Out) in the selected
direction. When in Edit mode, an additional click in the selected direction will go to the actual
beginning or end of the entire clip.
Using Fast Forward / Rewind
F-F (Fast Forward) and REW (Rewind) buttons transport program material at high speed in the
chosen direction. Four speed choices are available in each direction. Click the button repeatedly for:
4x, 16x, 64x, and 128x. Audio does not play at any speed beyond +/- 2X.
Slow Motion Playback
The MAXX-2400HD will play smooth slow-motion video in forward or reverse, at any speed
from zero to 2X. Direction can be instantly changed, using either the GUI or a desk-top controller.
Audio is also played at these lower speeds. At speeds beyond 2X, video frames will selected as
needed, yielding a chunky result; audio is muted at high speeds. Most slo-mo playback for sports and
other uses lies well within the 2X zone.
To play in slow motion from the GUI, press PLAY and then move the shuttle slider to the desired
speed—within a range of 2X range forward or reverse. See the following section for details on the
Shuttle control. For faster playback from the GUI, use the FAST FORWARD or REWIND buttons as
described in the preceding section.
In sports, slow-motion control is usually accomplished with a desk-top slow-mo controller, such
as those made by DNF Controls and others. These provide a hands-on experience far preferable to
using the GUI.
Using Shuttle to Control Playback Speed
The Shuttle Control is a slider bar that controls playback speed. Playback speed control employs
varispeed algorithms that may skip frames. It is not a perfect fast motion mechanism.
The center position represents zero speed, or Still.
The right and left extents of the slider represent ±2x maximums.
The Shuttle control slider works in three basic ways: Snap-Back to still, Hold Speed, and Mouse
Wheel.
• In Snap-Back operation, click and drag the slide control to change speed. Releasing the slider bar
will let it snap back to zero speed, or still.
MAXX-2400HD Owner’s Manual
Page 47
Download from Www.Somanuals.com. All Manuals Search And Download.
• For Hold Speed operation, position the cursor over the slider control scale (not the slider arrow)
and click the left mouse button to increment the speed control. The transport will run in the
selected direction at the selected speed without holding the mouse button down. The cursor
may now be moved over the Stop button to wait for the desired point.
• When using a wheel mouse, position the cursor over the slider scale and rotate the wheel to
increment speed. Rolling the wheel in opposite directions changes the direction the arrow slider
moves. To stop video, click the Stop button or the arrow slider.
Page 48
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing a Clip
Edit controls are activated with the Edit check box. Several buttons are available to define the
beginning and end of a region within a clip; associated time code displays are also present.
These non-destructive Mark In and Mark Out trim points can be set to define a portion of a clip
to be played. These “edit pointers” do not create a new clip from the original material; they act like
virtual trims, and material outside of the trim points is excluded, but can be retrieved by resetting the
Mark pointers. After setting the Mark In and Mark Out points, clips will play between these points.
These edit values are saved with the clip.
Edits may be saved to the current clip by de-selecting the Edit check box, or choosing Save from
the clip window File menu. Save As works to save the edit points to a new clip name, even if the
edits have not been saved in the current clip. This is a great help while conducting an Edit-while-
Recording.
Using Edit While Recording
Clips are most often edited after recording is complete, but it is sometimes desirable to create
sub-clips while the recording is still in progress. This is the preferred way to extract sports highlights,
for example.
Clips become available for editing about two seconds after the recording begins. Open the
recording on either Channel 2 or 3 by selecting the clip name from the FILE>OPEN menu. (A
recording must be 3 seconds long before it will appear in the clip list.)
Use the transport controls to select and mark the In- and Out-Points, as desired.
Without un-checking Edit, select FILE>SAVE AS, enter a new clip name, and click Enter. A
new clip is created that will play only between the In-Point and Out-Point. This clip can now be
played on the third or fourth channel, or assembled into a playlist.
Next, use the transport controls to locate another set of In- and Out-Points for a second segment,
and repeat the Save As command.
As noted above, it is usually easier to leave the edit channel in Edit mode when you plan to
make multiple “Saved As” clips. If you de-select Edit with unsaved changes, you will be given a
choice to save or discard the edit points. Remember that you will be saving the edits to the file that
is currently being recorded. Re-editing is required to see parts of it outside the region defined by
Mark In and Mark Out, even if the recording continues after the editing session.
Marking the IN point
Sets the current time code value into the Mark In point time display. The Mark In button can
capture a time code value from the clip when it is still, or on-the-fly.
Mark In Display
Displays the time code of the Mark In point. When no Mark In point has been set manually, this
displays the Start of Message (SOM) time code (usually 00:00:00:00).
MAXX-2400HD Owner’s Manual
Page 49
Download from Www.Somanuals.com. All Manuals Search And Download.
The values in this display window may be set by two methods:
•
Enter Mark In point from the keyboard: Use the mouse or Tab key to move between In
and Out fields. When a field is highlighted, enter a numeric value from the keyboard.
•
Whether a clip is still or playing, press Mark In to capture a time code value from the clip’s
current position.
Marking the Out Point
Sets the current time code value into the Mark Out point time display. The Mark Out button can
capture a time code value from the clip when it is still, or on-the-fly.
Mark Out Display
Displays the Mark Out point time code. When no Mark Out point has been set manually, this
displays the EOM time code (originally the end time of the recording).
The values in this display window may be set by two methods:
•
Enter Mark Out point from the keyboard: Use the mouse or Tab key to move between In
and Out fields. When a field is highlighted, enter a numeric value from the keyboard.
•
Whether a clip is still or playing, press Mark Out to capture a time code value from the
clip’s current position.
Duration Display
Displays the total running time (TRT) of the current clip. TRT is defined as the difference in the
time codes between the first and last frames, plus one. For example, if the first frame of the clip is
00:00:00:00 and last frame displayed at the end is 00:00:01:15, the reported duration will be
00:00:01:16.
With 59.94 Hz drop-frame time code, the true play duration may not be the exact numerical
value of ((Mark Out – Mark In) + 1) due to the discontinuities in the drop-frame time line. The true
run time is shown in the Clip Navigator.
Auditioning the Mark In Point (Review Clip Button)
|
|
<–>
The Review Clip button
cues the clip to the Mark In point (or SOM, if no Mark In
point exists) and begins playback. Review Clip will stop at the Mark Out point. The Mark
Out point will be displayed in Still mode.
The Review Clip button may be used to check the Mark In point without playing all the way
through the clip. After Review Clip is pressed and play begins, all of the standard transport
buttons are available for use.
Auditioning the Mark Out Point (Review Out Button)
|
–>
The Review Out button
may be used to audition the Mark Out point without
playing all the way through the clip. It will cue the clip to three seconds before the Mark Out
point (or EOM, if no Mark Out Point exists) and then begin playback. Review Out will stop
at the Mark Out Point.
Page 50
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
The following configuration options apply to the server as a whole, except where it applies
specifically to an individual channel.
Assigning Names to the Server and Transport Channels
The server can be assigned a name that will be displayed along the top of the Main GUI
Window. Each individual server channel can also be given a name.
To assign a name to the server or transport channels, click EDIT>CONFIGURE>NAMES from
the main menu pulldown.
The screen of Figure 15 is displayed. Use the keyboard to type in a name for any of the
selections. Names can be up to 31 characters in length. Spaces, digits and other non-alphanumeric
characters may be used. Click APPLY to accept the name. The names will appear in their appropriate
windows immediately.
Figure 15 - Configure Names Screen
MAXX-2400HD Owner’s Manual
Page 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming GPIO Outputs
The MAXX-2400HD has twelve General Purpose Outputs, referred to as GPO 1 through 12. Each
can be programmed to go active on the selected channel when one of the following events occurs:
Transport returns to idle
Transport is paused
IDLE
PAUSED
Transport is stopped
Transport is playing
Transport is recording
RAID or System Fault
No genlock
STOPPED
PLAYING
RECORDING
RAID System Fault
NO GENLOCK
NO VIDEO INPUT
PLAYLIST
No video at the selected input
Control GPO via playlist
To program a GPO output, select EDIT->CONFIGURE->GPO. The screen of Figure 16 is
displayed. GPO 1 through 12 are triggerable outputs. The checkboxes to the right of each selection
represent channel 1, 2, 3 and 4. GPO 9 is shown with the trigger option pulldown expanded.
1. To activate one of the GPO, pulldown the event menu and select which event will activate
the GPO.
2. Select an associated channel where applicable by checking the channel checkbox.
3. Click APPLY to activate.
Figure 16 - GPO Configuration Screen
Page 52
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming GPI Inputs
The MAXX-2400HD has 12 General Purpose Inputs, referred to as GPI 1 through GPI 12. Each can
be programmed to trigger one of the following events on a channel:
Cue a clip
CUE
Cue selected clip for immediate playback (Playlist Mode only)
JUMP
NEXT
Immediately plays next cued clip in a playlist for playback (Playlist
Mode only)
Pause a clip
PAUSE
PLAY
Play a clip
Start a recording
RECORD
SELPREV
SELNEXT
STOP
In Playlist Mode – Navigate to clip above currently selected clip
In Playlist Mode – Navigate to clip below currently selected clip
Stop a clip
To program a GPI Input, select EDIT->CONFIGURE->GPI. Figure 17 will display the screen. GPI 1
through 12 are programmable inputs. The checkboxes to the right of each selection represent video
channels 1, 2, 3 and 4. GPI 9 is shown with an expanded pulldown for trigger option.
1. To activate a GPI input, select the event from the pulldown the event menu
2. Mark a checkbox for the channel of interest. The event will be triggered when that GPI goes
active.
3. Click APPLY to activate.
Figure 17 - GPI Configuration Screen
MAXX-2400HD Owner’s Manual
Page 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the Ethernet Network
MAXX-2400HD provides a number of user settings that configure it for use in a practical
network. These will be found on the Configure Network tab shown below.
The NET-1 Ethernet port on the server has a unique IP Address. In this way, each server can be
identified on the network.
Network Settings Tab
Use the Main Menu selection bar at the top of the server GUI to configure network
communication settings.
Click EDIT>CONFIGURE->NETWORK
The screen of Figure 18 is displayed.
Figure 18 - Network Configuration Screen
The server is shipped with a default network Host Name and IP Address. Qualified network
engineers may change these configurations to suit your specific network environment. Factory
defaults for networking are:
•
•
Network Disabled
Use DHCP
Disabling the Network [X]
This selection turns the network OFF or ON. The default is Disabled (the box is checked). To
Enable the network connection, click the box to un-check it. Disabling the network can be used to
deny access to the server from the network for security purposes.
Page 54
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Enabling/Disabling DHCP [X]
Enabling DHCP will configure the network interface automatically.
If the DHCP box is not selected, the user may then manually enter assignments in the following
windows:
• IP Address
• Net Mask
• Default Router
( Example: 192.168.1.20 )
( Example: 255.255.255.0 )
( Example: 192.168.1.1 )
The Host Name and NTP domain name may be a fully qualified domain name, such as
edit1.mydomain.com. All other manually configured addresses must be properly formatted IP
addresses.
Saving Network Configuration
Click on OK, APPLY, or CANCEL to accept or abandon new entries.
The IP address of the system is displayed in the upper-left corner of the GUI at the end of the main
window title.
The server is designed to be used in a private dedicated video network. A firewall must be
used in systems that require internal security or connection to public networks.
Consult with a network security specialist for guidance on the best hardware, programming
and practices for your facility’s requirements.
MAXX-2400HD Owner’s Manual
Page 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Date and Time
Click EDIT->CONFIGURE->DATE/TIME. The dialog below appears.
Figure 19 - Time/Date Configuration Screen
Select the REGION and ZONE according to your geographic location or time zone. Use the scroll-
bar as necessary, and then click on the desired value.
Set the TIME and DATE by clicking on the Time/Date field and navigating the clock and calendar.
Check Automatic Updates to enable automatic updates using the Network Time Protocol
(NTP). Refer to Network Time Protocol on page 78.
Note: A System Restart is required for a Time Zone change to take effect.
Page 56
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Clip Navigator
The MAXX-2400HD’s Clip Navigator is used to find, select, delete, name, and rename clips.
•
•
Clips can be dragged and dropped anywhere on a Transport for immediate playback.
Single or multiple clips can be dragged into a Playlist. See page 62.
Click SHOW->CLIPLIST from the main pulldown menu to display the Clip Navigator.
Figure 20 – Clip Navigator
Renaming and Deleting Clips
Clips can be renamed by right clicking on them with the mouse, then selecting Rename from the
pop-up menu.
Clips can be deleted by right clicking on them with the mouse, then selecting Delete from the
pop-up menu.
Sorting Clips
Clips can be sorted in forward or reverse order by any of the columns by clicking once or twice
on the column heading. The previous sort is maintained, so if the sort is by Name, then by Profile,
the clips of each Profile will be sorted by Name.
Filtering the Clip Display
You can limit the number of clips displayed by typing a string in the FILTER window. For
example, typing “AT” in the filter window would limit the display to all clips that contain “AT”
somewhere in the clip name. Pressing the Clear button restores the complete display.
MAXX-2400HD Owner’s Manual
Page 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding Clips
Clips can be easily found using the Clip Locator. To locate a clip:
1. Click SHOW>FIND CLIPS. The Clip Locator screen of Figure 21 appears.
2. Check Case Sensitive to make the search case-sensitive.
3. Check Stop After First Match to find only the first match.
4. Check Use Regular Expressions to search for the string of interest ANYWHERE in the clip
name. With Regular Expressions unchecked, the search will match only clips that BEGIN
with the string entered at FIND. See the next page for more on Regular Expressions.
5. Optionally, Enter a string in the FILTER field to limit the number of clips displayed. For
example, entering “AT” in the FILTER field will limit the display to only clips containing “AT”
in their clip name. Pressing the Clear button restores the complete display.
6. Enter a name or part of a name in the FIND field. Press ENTER to initiate the search. The
clip(s) will be displayed according to the rules set by the checkbox settings.
Figure 21 - Clip Locator
Finding Clips Using Wildcards
The following wildcard conventions may be used in a search when Use Regular Expressions is
unchecked.
*
?
Match anything. For example, to find all clips starting with “xyz”, use the pattern “xyz*”. To
find all clips containing “2008” use “*2008*”.
Match any single character.
Page 58
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding Clips Using Regular Expressions
A regular expression (“RE”) specifies a pattern to be matched in a clip name. Regular expressions
can contain both special and ordinary characters. Ordinary characters just match themselves. Thus,
the RE “night” would match the “night” in the clip name “Tonight Show”, so this and any other clip
name with “night” in it would be placed in the list of found clips.
The following special characters are supported:
.
(dot) This matches any single character. “a.c” matches “abc”, “aac”, “a2c” and “a c” but
not “acd”.
^
(caret) This matches the start of a clip name. To find all clips starting with “xyz”, for
example, use the Regular Expression “^xyz”.
$
Match the end of the clip name. To find all clips ending in “xyz” use the RE “xyz$”.
<
Match the beginning of a word. For example “<Show” will match all clip names
containing a word that starts with “Show”, such as “Now Showing”, but not “LateShow”.
>
*
Match the end of a word.
Match zero or more repetitions of the preceding character. “.*” will match anything –
“G.*N.*” will match “Georgia Evening News” or “Good Night”.
+
?
Match 1 or more repetitions of the preceding RE.
The preceding Regular Expression term is optional. “ab?c” will match “ac” or “abc” but not
“adc”.
[ ]
Used to indicate a set of characters. Characters can be listed individually, or a range of
characters can be indicated by giving two characters and separating them by a "-". Special
characters are not active inside sets. For example, [a+$] will match any of the characters
"a", "+", or "$"; [a-z] will match any lowercase letter, and [a-zA-Z0-9] matches any letter or
digit. If you want to include a "-" inside a set, precede it with a backslash, or place it as the
first character. You can match all characters that are not within the set by making "^" as the
first character of the set; "^" elsewhere will simply match the "^" character. For example,
[^7] will match any character except "7".
SPACE A space is treated as an ordinary character. “ Show “ (<space>Show) will match “Tonight
Show” but not “Now Showing” or "NewShow”. “ “ will match any clip with a space in the
name.
The subject of Regular Expressions is much larger than can be covered here. Further
information will be found on the internet.
MAXX-2400HD Owner’s Manual
Page 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Playlists
MAXX-2400HD’s Advanced Playlisting software provides extensive tools for building, editing
and playing complex sequences of program content. Advanced Playlisting appears as on-screen
windows, with an intuitive Graphic User Interface that makes it easy to operate without extra
equipment. It’s invaluable for building commercial breaks, news rundowns, still-store and clip lists.
The server will create and store as many playlists as needed, each with its own unique name. For
many users, Advanced Playlisting may be all that’s needed to go to air.
The following features are included:
•
•
•
•
•
•
•
•
•
•
•
•
Drag-and-drop playlist building and editing on a graphic interface
Edit lists while they’re running
Start at any point in a list
Displays run time for clips, plus segment length and total remaining time
On-the-Fly commands for Pause, Skip, Hold, Next and Jump functions
Append a playing list with a saved playlist
Up to 12 programmable GPI Output events embedded in playlist clips
Programmable time-of-day start for a playlist
Generates an As-Run Log
Setting rules for deleting old material on the playlist
Simple text format allows playlists to be created, viewed and edited offline
FTP access allows playlists to be transferred between servers, or to/from a PC
Page 60
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playlist View
The playlist view for channel 1 is shown in Figure 22. Its functions are briefly described here.
Table 1 provides an overview of Playlist control functions and their associated hot-keys.
Figure 22 - Channel 1 Playlist View
FUNCTION
PLAY/ PAUSE
STOP/ SHOW
CUE
DESCRIPTION / REFERENCE
Play / Pause a clip ( Page 46, 64 )
Stop / Show First Frame ( Page 64 )
Cue a clip ( Page 64 )
Prepare next clip for playback ( Page 64 )
Jump to the selected clip ( Page 64 )
Check to loop a Playlist ( Page 64 )
INVOKE
PLAY Button P or SPACE
HOT-KEY
STOP Button
CUE Button
NEXT Button
JUMP Button
LOOP
S
C
N
J
NEXT
JUMP
LOOP
L
Checkbox
Check to enable editing ( Page 65 )
EDIT
E
EDIT
Checkbox
Enable Scheduled Start Time ( Page 63 )
ARM START
TIME
T
ARM START TIME
Checkbox
Scroll to currently playing Clip ( Page 64 )
HOME
Button
H
HOME
Table 1 - Playlist Control Functions
MAXX-2400HD Owner’s Manual
Page 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating and Running a Playlist
To Create a Playlist (Using Channel 1 in the example):
1. Change the transport for Channel 1 to the Playlist View. Click FILE->PLAYLIST in the
Channel 1 transport pulldown menu. The window of Figure 23 appears.
2. Click the EDIT check box to put the channel into edit mode.
3. Click SHOW->CLIP LIST from the main menu to open the Clip Navigator. Both
windows are now visible.
4. Double click on a clip in the Clip Navigator to add it to the Playlist. The clip will
appear in the playlist. The first clip will indicate a status of CUED. Alternately, click
on any clip and hold the mouse button as you move the cursor to the playlist. Let go
of the button when the cursor is over the position that you want the clip to appear in
the playlist (drag and drop).
5. Repeat the procedure to add more clips.
Figure 23 - Channel 1 Playlist with Clip Navigator
6. Click PLAY to run the playlist. The clips will be played in the order they were entered
in the playlist. The currently playing clip will indicate a status of PLAYING. The next
clip on the list will indicate a status of CUED.
Page 62
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 24 – Active Playlist
7. To SAVE the Playlist select FILE->SAVE-AS. Enter a file name. Click SAVE.
8. To SAVE an existing playlist without changing the name, use FILE->SAVE.
Loading a Playlist (FILE>OPEN)
Click FILE->OPEN from the Playlist View to bring up the list of available Playlists. Double-click
on a playlist to load it.
Saving a New Playlist (FILE>SAVE AS)
Once a Playlist has been created, it can be saved by selecting FILE->SAVE AS from the Playlist
View pulldown menu. Type in an appropriate name and click SAVE.
Saving an Existing Playlist (FILE>SAVE)
An existing Playlist can be saved by selecting FILE->SAVE from the Playlist View pulldown
menu. Type in an appropriate name and click SAVE.
Setting a Start Time for a Playlist
Set a start time for a Playlist by entering a twenty four hour time of day in Hours, Minutes and
Seconds in the START TIME field (see Figure 22 ). Click on any field to edit the field. Check the ARM
START TIME checkbox to arm the start time. The ARM START TIME checkbox will automatically
uncheck itself once the playlist has started.
Triggering the Start Time is essentially the same as pressing the Play button, so it is possible to
arm the start time while a list is playing, have the playback stop from a Hold or GPI Stop, and then
restart when the Start Time triggers playback.
MAXX-2400HD Owner’s Manual
Page 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Stopping a Playlist (STOP)
Click STOP to halt a Playlist.
Pausing Playlist (PLAY/PAUSE)
When a Playlist is running, the PLAY key will change to indicate PAUSE. Pressing PAUSE stops
the Playlist immediately, on the current frame of a clip. Pressing it again will resume playback.
Cueing Clip (CUE)
When the Playlist is running, click CUE to immediately prepare a selected clip for playback.
When the current clip is finished playing, the Playlist will play the Cued clip, followed by all
subsequent clips. This allows the user to skip over clips that appear in the list between the currently
playing clip and the selected clip.
The user may also re-cue a clip that has already been played. In this case, the Playlist will restart
from the selected clip, and all subsequent events will be played (or re-played) in sequence. When
the Playlist is stopped, CUE will prepare the selected clip to play when Play is pressed, or the list is
started automatically by Arm Start Time.
Looping Playlist (LOOP [X] )
To loop the entire playlist after the last clip completes, check the LOOP checkbox at any time.
Upon un-checking, the list will play to completion and then stop.
Showing First Frame of CUED Clip (SHOW)
When a clip is cued, the STOP button legend changes to SHOW. Pressing it will display the
first frame of the cued clip.
Preparing Next Clip for Playback (NEXT)
When a Playlist is stopped, click NEXT to prepare the next clip in the Playlist for playback.
While the Playlist is running, NEXT will immediately begin playing the next cued clip in the Playlist.
(The next clip may require several seconds to load and cue for a seamless transition.) If the next
event in the Playlist is a HOLD, the NEXT command will move to the Hold event, and video will
display black.
Jumping to Selected Clip (JUMP)
Click JUMP to cue any selected clip for immediate playback; this permits jumping over
intervening clips. JUMP also allows clips that have already been played to be immediately re-cued
and played. In this case, the Playlist will restart from the selected clip, and subsequent events will be
re-played in sequence.
Scrolling to Currently Playing Clip (HOME)
Click HOME to make the currently playing clip visible in the Playlist View window. If no clip is
playing, then the currently-cued clip is displayed. This is helpful if you have manually scrolled
elsewhere in a large Playlist. Once this is done, the display will also maintain the currently-playing
clip within the window, if EDIT is off
Page 64
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Maximum Number of Items to Keep
To set the number of played items to be retained in a playlist:
Click OPTIONS>CONFIGURE from the Playlist View of the channel pulldown. Use the
thumbwheel UP and DOWN scroll button to increase or decrease the number of clips to retain. The
default value of zero will retain ALL Clips.
Figure 25 - Channel Playlist Configure Screen
Enabling As-Run Logging
To enable As-Run logs, Click OPTIONS>CONFIGURE from the Playlist View of the Channel
Transport. Check the Enable As-Run logging checkbox to enable As-Run logging. Uncheck the box to
disable As-Run logging. When enabled, a check mark will appear next to the As-Run log label, and
files played by a playlist will be written to an As-Run log. As-Run logs are available only through FTP
downloads; they cannot be viewed or printed from the server. After logging into a server, select the
ASRUN folder. All logs are stored in this location, and have the extension “.arl”.
Refer to APPENDIX E – AS-RUN LOGGING for more details about As-Run logging functionality.
Viewing, Editing and Archiving Playlists
Playlists can be accessed via the server’s FTP feature, allowing several capabilities:
•
•
•
Lists can be backed up on a PC, and sent to another server.
Lists can be viewed and printed from the PC
Lists can be edited or created on the PC and uploaded to the server.
Playlists are found on the MAXX-2400 FTP directory in the lists folder. They are simple text files
with the extension .LST. Refer to Appendix D
Playlist Management for more information.
Editing Playlists
Removing Clip from a Playlist
To remove a Clip from a Playlist:
•
•
Make sure the clip to be removed is not PLAYING or CUED.
Position the cursor over the Clip and right-click. Select REMOVE from the pulldown
menu.
MAXX-2400HD Owner’s Manual
Page 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing Clips Above or Below the Selected Clip
All clips above or below the selected clip can be removed unless a CUED or PLAYING clip is
affected. These options will “grey out” if removal is not allowed for this reason.
To Remove All clips above a selected clip:
•
•
Move the cursor over the clip to select it.
Right click the mouse and select Remove All Above from the pulldown menu.
To Remove All clips below a selected clip:
•
•
Move the cursor over the clip to select it.
Right click the mouse and select Remove All Below from the pulldown menu.
Inserting HOLD Into a Playlist
The HOLD command inserts a hold (wait) event in a Playlist immediately before the selected
clip. The PLAY or JUMP command will restart a Playlist after it has stopped on a HOLD line. The
HOLD command is also available in the Playlist Item Context Menu, accessed by right-clicking in the
Playlist item window. If a Programmed Start Time has been set and is armed, the Playlist will resume
when the Programmed Start Time occurs. See Page 63 for instructions on setting a programmed start
time.
Appending a Playlist (FILE->APPEND)
Make sure the EDIT checkbox is checked in the Playlist View window.
Click FILE->APPEND from the Playlist View to bring up the list of available Playlists. Double-click
on a playlist to load it. It will appear at the end of the list after a label event that shows the name of
the appended list. This operation can be performed during playback, allowing a new playlist to be
loaded without interruption of programming.
Changing Duration of Clips in Playlist
Make sure the EDIT checkbox is checked in the Playlist View window. Position the cursor over
a clip and right-click. Select EDIT DURATION from the pulldown menu. Enter a duration in the
Duration window. The minimum duration is 4 seconds. The entry may be in one of these formats:
1. Hours, Minutes, Seconds and Frames entered as HHMMSSFF
04300102 = 4 Hours, 30 minutes, 1 second, 2 frames
2. Hours, Minutes, Seconds and Frames entered as HH:MM:SS:FF
03:39:41:17 = 3 Hours, 39 minutes, 41 seconds, 17 frames
3. As a whole number along with the special characters H for hours, S for seconds, M for minutes
7H would set 7 hour duration. 31m would set 31 minutes. 15s would set 15 seconds.
NOTE: The Clip duration is affected only within the Playlist, for this event. The duration of the
source clip is not changed. Other events containing the same clip are not changed.
Page 66
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Mapping GPO to Playlist Events
The MAXX-2400HD has twelve General Purpose Outputs, referred to as GPO 1 through 12.
Any of these can be programmed to go active at a pre-determined time, or offset, after the beginning
of a Playlist clip. An active duration can also be set, after which the output again goes inactive. In
all cases, every output will go inactive when a clip ends. By default, a new clip contains no
programmed GPO output commands. Refer to APPENDIX A – CONNECTOR SPECIFICATIONS for
details on electrically interfacing to the GPO lines.
To Map a Playlist event to a GPO Line, Follow these steps.
A.
Select EDIT>CONFIGURE->GPO. The screen of Figure 26 is displayed. GPO 1
through 12 are the 12 triggerable outputs. The checkboxes to the right of each selection
represent channel 1, 2, 3 and 4. GPO 9 is shown with the trigger option pulldown
expanded.
a. Set the GPO of interest to PLAYLIST mode from the pulldown menu.
b. Set the Channel to video 1, 2, 3 and/or 4 by checking the appropriate box to the
right. Click APPLY to activate the settings.
B.
C.
Check the EDIT checkbox in the Playlist View of the transport.
Place the cursor over a Clip in a Playlist. Right click on the clip. Select EDIT GPO. The
GPO Editor (Figure 27 ) appears.
D.
E.
Enable the GPO of interest by checking the corresponding ENABLED checkbox.
Enter an offset into the Clip to activate the GPO line in the Offset Field. The form of the
field is Hours, Minutes, Seconds and frames. ( HH:MM:SS:FF )
F.
Enter the Duration for the GPO to remain active in the Duration Field using the same
format. Click APPLY to activate the changes.
Figure 26 - GPO Configuration Screen
MAXX-2400HD Owner’s Manual
Page 67
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 27 - GPO Editor
Mapping GPI to Control a Playlist
Playlists can be controlled with the twelve GPI Inputs. See Programming GPI Inputs on page 53.
Page 68
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Topics
System Timing
The MAXX-2400HD is equipped for use with an external genlock signal as a timing reference.
This causes all outputs to be synchronous with other video signals in a facility.
Adjustment of Genlock Lines will fine tune this synchronization to compensate for differences
in equipment and wiring. This global setting for all outputs allows timing to be varied by one line
of video. This rarely if ever needs to be adjusted. If required, it would be adjusted so that the
output of the first line of video happens concurrently with other contributing inputs. The visible
effect is that the picture will rise or fall by one line when viewed at the output of a video switcher,
or on a genlocked monitor. Note that this setting can cause VANC data to appear on different and
possibly inappropriate lines.
Figure 28 - Video Timing Adjustment
MAXX-2400HD Owner’s Manual
Page 69
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Embedded Audio
The MAXX-2400HD provides 8-channel embedded audio capability. Features include:
•
•
Synchronous 20-bit audio at a 48K sample rate. Non-genlocked audio and other sampling rates
are not supported.
The server records and plays Group 1 and 2 audio, (channels 1-8). Up to 16 channels of audio
may be present in some HD-SDI streams.
•
•
In E-E mode, all embedded audio channels will pass through the server unaltered.
The user can select an audio source from the embedded audio, from the optional AXP-3 and
AXP-4 multi-channel analog audio modules, or from the optional DXP-1 multi-channel
AES/EBU digital audio module. Mix-and-match among inputs is not supported.
•
Regardless of the source recorded, embedded audio is always inserted in the HD-SDI stream
on playback, even when the primary audio output will be analog or AES/EBU audio.
•
•
User bits in the HD-SDI embedded audio stream are not supported.
20 bit Dolby®-E is supported with 360 Systems’ Bit-for-Bit® technology.
Using Audio Sample Rate Conversion
A check-box is provided to engage built-in sample rate converters for incoming AES/EBU audio
tracks, which are then converted to a 48K broadcast standard synchronized by video genlock.
Sample Rate Conversion does not apply to analog or Embedded audio.
The sample rate converters should be used in any of these cases:
1. The incoming digital audio and video are not referenced to genlock.
2. The sync reference is set to INTERNAL.
3. The incoming digital audio is not at a 48 KHz sample rate.
Page 70
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Ganging Channels for Synchronized Playback
Two video channels can be ganged together for frame-accurate playback. This may be used for
key and fill material (either stills or clips), or multi-channel playout of presentations, such as
synchronized matte backdrops on News Broadcasts, or multi-screen projection of related images.
The channels can be ganged in the following combinations:
•
•
•
Channel 1 controls Channel 2 and/or Channel 3 and/or Channel 4.
Channel 2 controls Channel 3 and/or 4
Channel 3 controls Channel 4
To configure Channel Ganging Click EDIT->CONFIGURE->TIMING from the Main Menu. The
video timing adjustment screen on page 67 is displayed. Two examples of this are:
•
To gang Channel 1 to channel 3, set CHANNEL GANGING MASTER to 1 and click the
GANG checkbox on channel 3.
•
To gang Channel 3 to channel 4, set CHANNEL GANGING MASTER to 3 and click the
GANG checkbox on channel 4.
Using Ganging for Key-and-Fill or 3D Playback
Channel Ganging is used for frame-accurate playback of stills animated sequences that have
an alpha, or key, channel. These in turn are fed to a downstream keyer or video effects generator,
to be combined with other video content. Manual or automated control of the Master channel is all
that is needed to play both the key and the fill. The MAXX-2400HD can also be used to play two
synchronized channels for 3-D applications.
Key and fill clips are associated by their names. The Key Clip must have the same name as
the Fill Clip with a trailing underscore. Example:
Fill clip name: myfile
Key clip name: myfile_
There is no provision for automatic loading of similar named clips on more than two
channels—the Master channel and the next higher numbered Ganged channel.
Proper key and fill operation requires two clips of identical length. This can be accomplished
by editing with head and tail trim.
Channel 3 is ganged to Channel 4 in the following example:
When a clip is opened/cued on Channel 3, the server automatically looks for another clip with
the same name, plus a trailing underscore. If the clip is found, it is loaded on Channel 4. The
Channel 3 clip contains the “fill” material, while the Channel 4 clip contains the “key” (or alpha)
file.
MAXX-2400HD Owner’s Manual
Page 71
Download from Www.Somanuals.com. All Manuals Search And Download.
An automation system could, for example, issue a VDCP Cue command to Channel 3 for a
clip called “logo”. Channel 4 would automatically be loaded with clip “logo_”. A Still or Play
command sent to Channel 1 would cause both Channels 1 and 3 to display the fill and key clips,
respectively.
Note that the VDCP checkbox option to “show first frame” for a Cue command is ignored for
channels in ganged mode. The automation system must issue a Still command to Channel 1 to
achieve this effect.
Ingesting a TARGA file via FTP automatically creates a key clip and a fill clip, each a single
frame in length. For example, if file “xyz.tga” is transferred to a server via FTP, then a pair of
single-frame clips is created: “xyz” and “xyz_” containing the fill and key material.
Combined Video and Graphics Capabilities
MAXX 2400HD includes graphics import capability, enabling the server to function as both a
graphics still-store, and an animation playout server. Its four outputs give it the power to provide
key-and-fill material along with two additional video feeds simultaneously.
The server supports FTP import from most graphics systems, including Photoshop®, After
Effects®, Final Cut Pro®, Xpress Pro™, Liquid Edition and Vegas Video.
Importing TARGA Graphics Files
The server will be able to recognize and ingest single-frame TARGA files via FTP from many
network-attached graphics workstations. TARGA files have a .tga extension, and may contain an
alpha (or key) channel. During transfer, the server will split the TARGA file into a Fill frame, and a
Key frame if it exists. These will be converted to high-resolution files, one frame in length.
For example, if an original file is named Logo.tga, the files created will be named Logo.mxf
(the fill file) and Logo_.mxf (the key file). Note the trailing underscore “_” added to the file name
of the key. This allows the TARGA file to be used for key and fill applications when channels 2
and 3 are ganged together.
The resolution of a TARGA image should be 1920 x 1080 for use in 1080i format, or 1280 x
720 for use in 720p format. If the original TARGA image is not of this resolution, the server will re-
scale it, possibly introducing some dimensional distortion. The bit depth of the files must be 24 or
32 bit. The server does not support Targa sequences, only single frame graphics.
Animation Import (.mov files)
From the server’s standpoint, an “animation” is a clip with a minimum length of two seconds.
Clips used for sequential (back-to-back) seamless playback must be a minimum of four seconds
long. A separate Alpha channel may or may not be present. Any graphics workstation capable of
exporting files supported by the server can make transfers to it via FTP. If an alpha channel is
present, the naming conventions of the Key/Fill Mode apply: the file name for the key video is the
same as the filename for the fill video with the addition of an underscore character ( _ ). Many
software programs have the ability to create content compatible with the server, including Final
Cut Pro®, Avid® Xpress, Liquid Edition, Vegas Video; and Adobe® After Effects®, Premiere® and
Photoshop®.
Animation sequences to be sent to the MAXX-2400HD should be saved in QuickTime format
with either no compression or with Run Length Encoding enabled. The image size should be
1920x1080 or 1280x720. An alpha channel may be present.
Page 72
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The resulting .mov file may be sent to the server by FTP, logging in as user “anonymous”
or “ftp”. No password is required. After the transfer completes, the server will render (encode) the
.mov animation sequence into a pair of JPEG-2000 clips (key and fill) that are playable on the
server. This is a somewhat time-consuming process, so it takes place in “background mode”. The
GUI status bar indicates the clip being processed. When finished, the clip name will appear in the
GUI clip list, ready for playback.
Still Frames
A single-frame clip (a “still”) may be inserted into a playlist. The length of a still will appear as
one frame in the clip list. When a still is encountered, the playlist will pause and hold the still
image until a Play command is issued, at which point the playlist will continue to the next clip in
the list. When using the GUI, the space bar (a keyboard shortcut) will also advance the playlist.
Stills may be placed anywhere in a playlist. In fact, a playlist may be entirely composed of stills.
A still frame clip in a playlist can have a duration assigned to it (See page 66 ). It will then
play for that duration and the list will continue automatically.
Stills are created when TARGA files are ingested. (See page 76 for a description of TARGA file
ingest.) It is also possible to create a still frame by editing any clip. When editing the clip, position
the transport on the desired frame and set both the In and Out points to this frame. Save the clip,
or Save As to a new clip name. The selected frame will be displayed when the clip is played in the
Playlist.
MAXX-2400HD Owner’s Manual
Page 73
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP File Transfers
The MAXX-2400HD connects over Gigabit Ethernet using an RFC-1359 compliant FTP server.
File transfers to and from the server are managed from an FTP client file transfer program running
on a Windows® or Macintosh® computer. This provides a rapid way to execute drag-and-drop file
transfers; it can also manage many servers at once and does not tie up the server GUI, which may
already be in use. Table 2 indicates the supported FPT client list.
FTP Client
Flash FXP
DOS FTP
WS FTP
Version
3.2.0
Platform
WINDOWS XP, WIN2K
WINDOWS XP, WIN2K
WINDOWS XP, WIN2K
WINDOWS XP, WIN2K
MAC OSX
5.1.2600
5.08
Internet Explorer
Fetch
6.0.2900
5.2
CyberDuck
2.7.3
MAC OSX
Table 2 - Supported FTP Clients
FTP programs may also be used to move recorded or edited material between a server and
Network Attached Storage (NAS) or a DVD-ROM library.
From a networking or system-integration viewpoint, the server appears as a normal FTP server
in any size network, with the exception that it may only send, receive, or store video files that are
compatible with the server.
The server is designed to be used in a private dedicated video network. A firewall must
be used in systems that require internal security or connection to public networks.
Consult with a network security specialist for guidance on the best hardware,
programming and practices for your facility’s requirements.
Gigabit Ethernet Cable Quality
The high data rates generated by Gigabit Ethernet require high-quality cable designed for this
application. Low-quality network cables can result in high error rates and lower transmission
speed. For Gigabit operation, standard CAT-5 cable should be used only for very short cable runs.
New Category 5e (enhanced) cables ensure maximum transfer rates, and should be used as the
minimum standard. Category 6 cable is a good choice for applications where longer cable runs are
required.
Configuring the FTP Interface
Before logging in to the server’s FTP server, the network must be configured according to the
local network topology. This is primarily a matter of setting a static IP address or configuring
the server to use DHCP to obtain an IP address from a DHCP server. Refer to page 54 for details on
configuring the network settings.
Page 74
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
When connecting directly to a PC or Laptop, configure the server as IP address 192.168.1.3,
netmask 255.255.255.0 and disable DHCP. In the PC, double click on the Local Area Connection
Icon in the system tray or in the Network and Dial-Up Connections in the Control Panel. In the
Local Area Connection Status dialog, click on Properties. Click on the item “Internet Protocol
(TCP/IP)” and click on Properties again. In Local Area Connection Properties, turn off “Obtain an IP
Address Automatically“ by selecting “Use the Following IP Address” and set the address to
192.168.1.2, netmask to 255.255.255.0.
No hardware settings are available or needed. The NET-1 port automatically negotiates port
speed and configures transmit and receive connections, and does not need a “crossover” cable
when connecting directly to a PC.
The actual transfer rate depends on the format of the files being transferred, the number and
bit rate of video streams being played.
Logging In to the Server FTP Service
The server allows only for anonymous login. Using one of the FTP clients shown in Table 2
,
enter “anonymous” as the user name or check the “anonymous” checkbox on the login screen.
When the FTP client is connected, it will display the Clips in the main directory and all of the
sub-folders. Clips can be uploaded, downloaded, deleted and renamed using standard FTP client
commands. Clips in the subfolders can be displayed by entering those folders. Consult the
documentation for your FTP client for information on changing folders.
File Sizes Reported in Listing
The size of a clip reported in the file listing is the amount of video and audio data included in
the entire clip, regardless of the settings of the In Point and Out Point.
Overwriting Files
It is the responsibility of the client application (Windows Explorer, FlashFXP, etc) to ask the
user if they want to overwrite a file.
Note that some types of files (such as .mov and Targa) change their file extensions when they
have been transferred into the server. In these cases, the FTP client cannot warn of a file
overwrite. It is important to take extra care when using these types of files not to overwrite
necessary files.
Interrupted and Resumed Transfers
If a transfer is interrupted (for example, by a dropped connection), the amount of the file that
has been transferred is kept on the target system. Resumption of a partial transfer is possible if the
FTP client supports it.
MAXX-2400HD Owner’s Manual
Page 75
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer of Edited Segments
The server sets MARK-IN and MARK-OUT points in a clip as “edit pointers.” For all edit
operations within a given server, these pointers produce “virtual edits” that save disk space, and
the time it would take to re-write the marked region as a new file.
When transferring clips via FTP, the entire clip is transferred.
To maintain the identity of the transferred clip, the time code references for its Mark-In/Out
points are maintained, as shown in Figure 29
.
When transferring edited material, keep in mind that you are making copies of the data on the
target device. While subclips that reference the same video content on the original recordings take
up minimal extra disk space, they could take considerably more space on the target storage.
Before Transfer (On Source Image server)
00:00:00;00
CLIP_A.mxf
01:22:18;04
00:30:00;00
IN POINT
00:32:00;00
OUT POINT
(
)
(
)
After Transfer (On Target Image server)
00:32:00;00
00:30:00;00
CLIP_A.mxf
Figure 29 – Result of a network file transfer
Supported file types
MAXX-2400HD recognizes media file types by their file extension. It is important that the file
extension properly identifies the file content. Attempts to send a file in one format but
masquerading as another due to a wrong file extension may result in undefined behavior. The
following formats are supported:
JPEG 2000 (.vcf)
As of this writing, the JPEG-2000 file is .vcf (360 Systems) format. Near-term software releases
will provide file exchange capability with JPEG-2000 products from other companies.
MOV (.mov)
MOV-wrapped graphics can be imported and rendered for playback as JPEG-2000 files.
Animation sequences to be sent to the MAXX-2400HD should be saved in QuickTime format
with either no compression or with Run Length Encoding enabled. The image size should be
1920x1080 or 1280x720. An alpha channel may be present.
Page 76
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TARGA (.tga)
24 or 32 bit format. (16 bit format is not supported.) During transfer, the TARGA file will be
split into a Fill frame and a Key (Alpha) frame. These are saved as two separate JPEG-2000 video
clips, each one frame in length. The clip name for the fill frame is the base name of the .tga file,
while the key frame has this name with an appended underscore character. The resulting files will
be available as MXF files for subsequent FTP transfer.
Playlists (.lst, .txt)
A server play list is a text-based file residing in the “/lists” directory. Playlists can be created
off-line and transferred to the server using FTP. See page 130 for further information on Playlist file
editing and management.
As-Run Logs (.arl)
As-Run logs are available from FTP to confirm the operation of the server Advanced Playlist
feature. See page 65 for further information on using As-Run logs.
MAXX-2400HD Owner’s Manual
Page 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Time Protocol
Automatic Date/Time Updates
When using server play-lists in broadcast applications, an accurate record is often needed of
what was played and when. The server’s As-Run logging feature creates such a record, time
stamping each played clip using the machine’s internal date/time clock. Very accurate time
stamping can be achieved by synchronizing the server’s clock to an external time base that is
referenced to Coordinated Universal Time (UTC).
This is accomplished using the Network Time Protocol (NTP) to interrogate time servers
through a network connection. A time server could be an in-house computer that is equipped with
a GPS receiver, or a radio receiver locked to signals from the NIST radio station WWV.
Alternatively, public time servers may be used which are accessible through an Internet
connection.
Connecting to the Network
To obtain automatic date/time updates from the public time servers on the Internet, you will
need to provide the server with Internet access. Generally, servers would be connected on a
secure high-speed local area network, with any Internet connection going through a router with an
integrated firewall. The Network Time Protocol uses TCP/IP port number 123, so be sure the
firewall is configured to allow access to this port per Figure 30.
Figure 30 - NTP Network Block Diagram
Page 78
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring NTP
The server GUI is used to set the time zone and to enter the networking parameters. The local
GUI must be used, as these configuration screens are not available on the Remote Workstation
Interface.
Selecting the Time Zone
Starting at the main menu bar, Click Edit->Configure->Date-Time screen. When
“Automatic Updates” is not checked, the Region and Zone lists are enabled. Select your region
and then the zone within that region. There may be more than one way to your zone;
America/New York, for example, is the same as US/Eastern. Click the APPLY button to activate the
settings,
After changing the time zone a Quick Restart must be performed before changes become
effective.
Figure 31 - Date/Time Configuration Screen
MAXX-2400HD Owner’s Manual
Page 79
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Network Parameters
From the GUI’s main menu bar, Click EDIT>CONFIGURE>NETWORK. The following
screen appears. Make sure the basic network parameters have been entered.
Figure 32 - Network Configuration Screen
Disable Network: uncheck
Host Name: (Any name will suffice, but since this name appears on each line of the server’s
diagnostic logs, it is a good idea to keep this short.) The name should also be unique from other
devices on the network.
If “Use DHCP” if not checked, then enter a fixed IP address compatible with your local subnet. For
example,
IP Address:
Net Mask:
Default Router:
192.168.1.20
255.255.255.0
192.168.1.1
The Name Servers and NTP Servers fields provide the information needed to reach the public time
servers.
The NTP Servers field contains a list of time servers, either by numeric IP address, or by site name
(URL). Entries are separated by spaces.
Page 80
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The nonprofit Internet Systems Consortium, Inc. (ISC) maintains sites that automatically return
lists of public time servers to an NTP client such as the server. Hence, the NTP Servers field is
initially filled in with the URL’s for these sites (0.pool.ntp.org, for example). Of course you can
overwrite this list with the addresses of specific time servers you may want to use. However, if you
try to clear the NTP Servers field it will be reset to the default list.
Note: When URLs (non-numeric site address such as pool.ntp.org) are used in the NTP Servers
field, you must provide the IP address of at least one DNS (Domain Name server) in the Name
servers field. Typically, this address is supplied by your Internet Service Provider.
These name servers translate URL names into numeric IP addresses needed to access the sites
in question.
When using a GPS-based time server which is connected directly to a local area network,
enter its numeric IP address (such as 192.168.1.60) into the NTP Servers field, leaving the Name
Servers field blank.
Also, if you know the numeric IP addresses of the public or corporate time servers on the
Internet, you can enter these addresses, separated by spaces, in the NTP Servers field, leaving the
Name Servers field blank, since there would be no URLs to be resolved.
Note: Not all Time servers allow unlimited public access. Refer to www.ntp.org for more
information.
Click the APPLY button to save your changes.
MAXX-2400HD Owner’s Manual
Page 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Automation Control
MAXX-2400HD’s serial control inputs connect with many broadcast automation systems,
instant replay panels, video switchers, and remote control devices.
For compatibility with simple controllers and push buttons, the server also provides 12 GPI
(contact closure) inputs, and 12 programmable command outputs.
Remote Serial Control
The server’s four 9-pin RS-422 serial control inputs permit control of their associated video
channels. The following serial protocols are accepted::
•
•
•
VDCP
BVW
ODETICS Extension to the BVW protocol
Figure 33 - Rear Panel Detail of Serial Port Connectors
CH1 - Channel 1, also referred to as COM1
CH2 - Channel 2, also referred to as COM2
CH3 - Channel 3, also referred to as COM3
CH4 - Channel 3, also referred to as COM4
With VDCP, each port can also respond to channel ID numbers that are equal to, or multiples
of, its base number. For example, channel 1 will also respond to 5, 9, 13, etc. This can be helpful
when an automation system needs to control a number of servers at once
The server’s multiple serial ports allow simultaneous connection of an automation controller
and a desktop editing controller. For example, one could attach an edit controller to Channel 1 for
record, playout, and editing; while an automation controller on Channel 3 manages play-to-air
operations. Alternatively, a single controller could control the operation of all server channels. A
single VDCP controller will commonly control multiple server channels.
It is also possible for a single VDCP controller to control multiple server channels.
Page 82
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Controller Priority
Only one serial controller can control a given video channel at a time. In general, the first
controller to gain control of a video channel will have exclusive command. This prevents
conflicting instructions that would cause unexpected behavior. The only exception is that the
graphic user interface can immediately take control of a channel by deselecting Serial Control in
that channel’s dialog window.
External controllers are prohibited from taking control away from the GUI. The SERIAL
CONTROL mode must be checked in the channel dialog window before a remote control device
can communicate with that channel.
Configuring the Automation Interface
Setting the automation protocol for a video channel
Each video channel can be configured independently for VDCP or BVW protocol.
To map a protocol to a channel, Click EDIT->CONFIGURE->SERIAL PORTS from the main
pull-down menu. The screen of in Figure 34 is displayed. Use the PORT pulldown to select
COM1, 2, 3 or 4; these map to Video channels 1, 2, 3 and 4.
•
•
Select VDCP to map the port to VDCP protocol
Select BVW to map the port to BVW and ODETICS protocols
Note that the ODETICS protocol is layered with the BVW protocol, and that it supports clip
names of up to eight characters only. Clips with longer names will not be displayed by an Odetics
controller and will not be accessible. This includes the demo clips shipped with the server; see the
section on page 57 to rename the clips to allow their use for testing.
VDCP operation can allow control of a channel by ID number from a different numbered
serial port, while BVW and Odetics protocol control only the channel number corresponding to
the number of the serial port in use. When using both protocols, take care to not allow a VDCP
controller to address a channel that is controlled by BVW/Odetics on another serial port.
If necessary turn on “Assigned Serial Ports” in VDCP Options – this will force VDCP to control
the channel corresponding to the serial port it is connected to regardless of the channel ID in the
control messages.
MAXX-2400HD Owner’s Manual
Page 83
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 34 - Serial Port Configuration Screen
Setting the Automation Source Directory
By default, automation equipment will access the Home or Root directory as a source of clips. The
directory accessed by automation equipment can be set for each port as follows.
Select the port to be used (COM1, COM2, COM3 or COM4).
Click on the FOLDER icon in the PATH field of the Serial Port Configuration Screen. Navigate to
the folder to be accessed by automation equipment.
It is recommended that for most applications only the root directory be used, and the
automation system be relied on for file management rather than the server. Automation can only
see the clips that are in the assigned Automation Source Directory. There are two classes of
applications for folders in conjunction with serial control:
Limiting the number of clips accessible to automation or remote controllers.
•
Some controllers have limited capacity for clip display and selection. Using a folder to
present only the currently needed clips can streamline operation.
Content can be prevented from being aired but still be readily accessible. Content can be
ingested at any time and made available to air by moving it into the Automation Source
Directory.
•
•
•
“Archived” material can be held in organized folders, then copied into the Automation
Source Directory as needed to air. The copies can then be deleted after airing without
affecting the archived copy.
Content for different purposes can be grouped in folders, and selected by changing the
Automation Source Directory.
Page 84
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Segregating material for different broadcast channels
•
Content can be placed in a folder for each channel, and played out by separate automation
systems or controllers. Each channel can run completely independently – there can be
duplicate file names with different content, and the opportunity for airing content on the
wrong channel is greatly reduced.
•
Content that is common to both channels can be copied into both directories. When this is
done in the GUI (as opposed to FTP transfer) the copies reference the same data so they are
available immediately and take no additional disk space.
Other Automation Options
As illustrated in Figure 34, a number of check boxes are provided that control how the server
will respond to certain VDCP commands. Once set, these options remain selected when the server
is turned off, and until changed by the user.
NOTE: The following options will apply to all four video channels. They cannot be individually
configured for each video channel. Except where noted, they apply only to VDCP operation.
Cue Shows 1st Frame
Upon receiving a Cue With Data or a Play Cue command, the server will cue the clip then jog
to and display the first frame of video. (This also applies to Odetics protocol.)
Cue with Offset (vs. Timestamp)
When checked, the time code for the clip becomes “zero-based” with reference to the head
point. To move to the head point of the clip, the automation controller would send a time code
value of 00:00:00:00, regardless of the clip’s original time stamp. When unchecked, the server
will calculate time code position based upon the time stamp from the first frame of the unedited
clip. Note that this only affects the operation of the serial port, it does not change the way the
server displays time code in the GUI.
Variplay 1X Equals Play
The server will interpret a Variplay 1x command as a Play command. (This also applies to
Odetics protocol.)
Variplay 0 Equals Pause
The server will interpret a Variplay 0x command as a Pause command. (This also applies to
Odetics protocol.)
Report Play (vs Still) At End
When the end of a clip is reached, the server will report Play to the automation controller,
instead of Still.
MAXX-2400HD Owner’s Manual
Page 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Ignore Preroll Commands
A minimum 4-frame pre-roll is required to allow the server time to respond to serial
commands. See the documentation for your controller or automation to find out how to set the
preroll value. Due to various ways preroll commands are implemented in different systems, it may
be sufficient to check only this box. A setting of 4 frames in the automation controller will then
work correctly.
This option is very seldom used; it allows preroll commands to be ignored and assumes that
the operational preroll is 4 frames. Do not check this unless you experience problems with frame
accuracy on recordings and playback transitions. Start with a setting of 4 frames on the automation
system and adjust until you achieve proper timing.
Auto E-E
Toggles Auto E-E mode (input monitor) on/off.
Assigned Serial Ports
VDCP protocol provides for altering the mapping of Serial Port to Video Channel via control
commands. Checking this option will lock the Serial Port to Video Channel ordering.
•
•
•
When checked, any command received on a particular serial port will be used to control
the like numbered video channel. This means that automation systems that use fixed or
limited VDCP ID numbers can use any output to control any channel of the server.
With this option checked, there is no requirement for a Port Open command to allow the
automation to control the channel. With some systems, this can negate the requirement to
restart the automation system when bringing the server online.
Do not check this option when using controllers that communicate with all channels over a
single serial port.
Communication Port Parameters
The serial data transfer parameters for the server are fixed and cannot be changed. These
characteristics are common to all automation controllers:
Baud Rate
Start Bits
Data Bits
Parity
38.4 K Baud
1
8
Odd
1
Stop Bits
Page 86
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Tested Automation Controllers
The server has been tested by 360 Systems and the manufacturers of equipment listed below,
and found to operate correctly. This list is not comprehensive, and the inclusion or absence of a
product does not indicate a preference for any make or model. Operational variations do exist
between makes and models.
Manufacturer
HARRIS AUTOMATION
SUNDANCE
Controller
ADC-100
FAST BREAK
EMC-NT
Protocol
VDCP
VDCP
VDCP
VDCP
VDCP
VDCP
Notes
ALL HARRIS CONTROLLERS SAME
NVERZION
CRISPIN CORP.
FLORICAL
SYSTEM 2000
AIR BOSS
AIRO
VCI SOLUTIONS (DTG)
HARDATA
HDX VIDEO
ITA
ODETICS
VDCP
IBIS
VDCP
VDCP
VDCP
VDCP
PEBBLE BEACH SYSTEMS
PROBEL
ANEMONE
MORPHEUS
PLAYTIME
ASTRA
PHAROS
AVECO
Tested Remote Control Panels and Switchers
360 Systems servers have been tested by 360 Systems as well as manufacturers of remote control
devices and video switchers listed below, and found to operate correctly.
Manufacturer
ROSS VIDEO
ECHOLAB
Controller
SYNERGY® SWITCHERS
OPERA SWITCHERS
4000-CL
Protocol
VDCP
VDCP
VDCP
P2
Notes
DNF CONTROLS
DNF CONTROLS
ASH VALE
ALSO USED WITH DNF SHOT BOX
BVW-75, ALSO ODETICS PROTOCOL
SLOW MOTION CONTROLLER
BVW-75, ALSO ODETICS PROTOCOL
ALSO ODETICS PROTOCOL
300-SSM
SM-2
P2
BUF
VTC-4000
P2
BUF
SPOT
VDCP
ODETICS
VDCP
LANCE DESIGNS
TDC-100
USE INT MODE
H
I-TECH SYSTEMS
ACTIV CART BOX
ALL VDCP PRODUCTS SAME
MAXX-2400HD Owner’s Manual
Page 87
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Workstation Interface
The Remote Workstation Interface is a software application that provides control of the server
from PC workstations located within a facility. A remote workstation can access one or more video
channels of the server to perform ingest, playback, trimming, playlisting, traffic operations or
monitoring of server activities.
Applications include—
•
•
•
•
•
•
•
•
Control of a server located in a machine room
Ingest station for loading commercials and other content from tape
Edit station for trimming content
Building, editing and running playlists
Remote control of a server located at a transmitter site (“evergreen” backup)
Access to file content and operations by engineering or management
Control of more than one server from a single workstation
On a wireless network, a server can be controlled by a secure
Wi-Fi enabled laptop computer
•
•
Remote control in a conference room, or during auditorium presentations
Servers may be securely controlled from a remote location, even across public Internet
connections, with inexpensive VPN (Virtual Private Network) technology.
A single server may be controlled from more than one different location on the network. See
Figure 35.
Similarly, a single computer can run multiple Remote Workstations to control multiple servers.
Remote Workstation software provides the same functionality as the local GUI with the
following exceptions: It cannot access the server’s network configuration screen, shutdown the
server, access the RAID status display, or display the server’s time-of-day clock.
As of this writing, the current version of Remote Workstation is 3.03.08, this is required to
work with server software version 1.03.515.
System Requirements
•
PC with Windows XP, Vista or Windows 7 installed. Other operating systems have not been
tested and may not be supported.
•
10 MB free space on the computer hard disk, plus 128 MB RAM.
Page 88
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 35 - Remote Workstation Deployments
About the Remote Workstation Interface
The Remote Workstation Interface consists of a CD-ROM carrying the Remote Workstation
application for Windows XP, Vista or Windows 7 computers. It self-installs using the normal
Windows prompts. It is possible to install the Remote Workstation software on a number of PCs;
any of them can then control one or more channels of one or more servers.
Operations
Up to four Remote Workstations can simultaneously view the channel activity of a single
server. Only one Remote Workstation at a time can take control of a particular video channel.
Control of the server video channel is not automatically granted to a Remote Workstation just by
attempting to use the GUI; control must be actively taken, using the TAKE CONTROL option
described below. This allows remote monitoring of server channel activity while greatly reducing
the likelihood that a remote user will interfere with operations initiated by another. All
Workstations, including the server’s local GUI, have equal priority and any can take control of a
video channel at any time. Control is granted for server channels individually, and not
automatically for all four; therefore, four Remote Workstations can each control a separate video
channel. Each Remote Workstation can display or close transport windows without affecting other
Workstations or the Local GUI.
The IP address of a Remote Workstation currently controlling a channel appears in the status
bar on the bottom-left of the Playlist or Channel window.
A menu labeled Options appears at the upper-left of each server channel window. Clicking
this menu presents a drop-down menu with a TAKE CONTROL option. Select this then click Yes
in the confirmation dialog to give control of the video channel to your workstation.
MAXX-2400HD Owner’s Manual
Page 89
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
To install Remote Workstation software from CD-ROM insert the CD-ROM into the PC.
•
The auto-run capability of Windows will start the Remote Workstation setup program. If it does
not, select the Run… option of the taskbar Start Menu and type: D:\setup.exe. If necessary,
replace D:\ with the drive letter of your CD-ROM.
•
•
•
You will be prompted to enter the IP address of the server you wish to control. If you know the
address, enter it here. This information can also be entered after installation.
Read the terms under which this software is licensed to you. If you agree, installation will
continue. If you do not agree, installation will stop. Follow the prompts to finish installation.
By default, the Remote Workstation software installs all required files into the
“C:\Program Files\ Image Server RWI” folder. However, during the installation process an
alternate directory may be specified. If a previous version of Remote Workstation is already
installed on the Host computer, use this feature to install the new version in a uniquely named
folder for example C:\Program Files\MAXX2400.
,
After Installation
A 360 Systems Remote Workstation icon will appear on your desktop. Double click the icon
to open a remote session on the server. To change the target server you wish to access, right click
on the Remote Workstation icon. Select “Properties” from the drop-down menu. In the “Target”
text box, change the IP address listed in the box to the IP address of the server and select “OK”.
Figure 36 – Remote Workstation Properties Page
Because multiple simultaneous sessions of Remote Workstation may be started from a single
Remote Workstation, it is possible to make copies of the Remote Workstation icon and change the
IP address of each to allow one-click access to any number of MAXX-2400HD servers. Simply right
click on the Remote Workstation icon and select Copy from the pop-up menu. Next, right click
anywhere on the desktop and select Paste. Finally, follow the instructions above to edit the IP
address to match the second server.
Page 90
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard Disk Management
MAXX-2400HD employs an advanced Serial-ATA controller that manages twelve high-
capacity hard disks operating in a RAID-6 configuration. This design increases system
performance, and by storing parity data, can survive the loss of up to two drives in the array
without data loss.
The Image Server brings a high level of reliability to Serial-ATA RAID through a new, switched
architecture that exceeds the reliability of SCSI shared-bus storage systems. The earlier shared-bus
architecture of SCSI had inherent performance limitations due to arbitration latency, since only one
drive may use the bus at a time. Further, a single drive failure could bring the entire storage system
down.
By contrast, the Image Server uses a non-blocking switched architecture to isolate the drives
from one another. Any drive failure makes that drive unavailable and the rest of the storage system
remains undisturbed. In addition, the Image Server uses Advanced Data Protection features, where
all drive commands are checked to ensure that no command corruption has taken place over the
entire data path.
Some of the MAXX-2400HD RAID-6 implementation features and benefits include:
•
•
•
•
•
•
Non-blocking switch technology with RAID-6 parity
On-board processor minimizes host CPU overhead
Easy-to-configure arrays
Dynamic sector repair for robust data protection
Accelerated RAID-6 writes
Easy, hot-swappable drive replacement from front panel
MAXX-2400HD Owner’s Manual
Page 91
Download from Www.Somanuals.com. All Manuals Search And Download.
About RAID 6
A RAID 6 configuration features the data striping of RAID 0, combined with the parity benefits
of RAID 4. RAID-6 is similar to RAID-5 in that parity information is distributed across all drives
rather than being concentrated on a single disk. This avoids throughput loss due to contention for
the parity drive. RAID-6 uses two parity stripes, and RAID-5 uses one. RAID-5 can tolerate the loss
of one drive whereas RAID-6 can tolerate the loss of two drives due to the extra parity stripe. Spare
drives can be used to rebuild an array after a drive is replaced.
RAID-6 capacity equals the size of drive times (number of drives -2). In addition, the array’s
storage efficiency increases with the number of disks; from 75 % for 8 drives to 83% for 12 drives:
storage efficiency = (number of drives -2) / (number of drives).
Figure 37 - RAID 6 Array Schematic
Improved Write Performance
The Image Server uses new designs to improve RAID-6 write performance for both large
sequential and small random transactions. This advanced block caching firmware delivers
extremely high performance for RAID-6 write operations.
Page 92
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing Disk Arrays
The Image Server’s Disk Array Configuration Utility provides tools for monitoring and
managing the disk array. Monitoring and troubleshooting programs automatically check the array,
report problems and provide access to RAID status information and service options.
If up to two drive faults should occur, it should not cause data loss; but remember that the
drive array is degraded and no longer has fault tolerance. Hence, another disk failure will cause a
complete loss of data and system failure. After a drive failure it is strongly recommended that at
the earliest time diagnostics be performed.
Error Notification and Repair
The server will notify users in the event of a fault by flashing the front panel DRIVES light. A
failure condition will also be indicated in the Image Server GUI in the status bar, on the bottom of
the screen and highlighted in yellow ( Figure 38 ). A GPIO Output can be programmed to activate
upon a RAID or system fault. This can be used to activate a warning lamp or alarm. Refer to Page
65 for more information on programming GPIO events. A drive fault can be trigged by a variety of
conditions. The first step in response to an error warning is to open the RAID CHECK STATUS
window from the On-Screen Start Menu. Click Start > RAID Status to launch the RAID Array
Configuration Utility.
Figure 38 - GUI Drive Fault Indication
The RAID Maintenance window (Figure 41) displays the current status of the RAID controller
and all disks connected to the RAID system. On inspection, you will find the array in one of the
following states:
•
•
•
•
•
OK, indicated by "OK" for Array Unit 0 and all Ports (drives);
Initializing, indicated by "Initializing" on the Array Unit 0 status line;
Degraded, indicated by "Degraded" on the Array Unit 0 status line;
Verifying, indicated by "Verifying x%" on the Array Unit 0 status line.
Rebuilding, indicated by "Rebuilding x%" on the Array Unit 0 status line.
MAXX-2400HD Owner’s Manual
Page 93
Download from Www.Somanuals.com. All Manuals Search And Download.
“Verifying” is the process by which the array controller corrects data parity errors that may
have occurred because of power loss, incorrect shutdown or some other data error. Upon
detection of a parity error, the controller will automatically start the rebuilding process as a
background task. This task should not interfere with Image Server’s ability to record or play clips.
The term “degraded” refers to the state of the Array data, not necessarily the hardware or disk
drives themselves. It indicates that the parity information that protects the data is not up to date.
Parity errors may occur if the server loses power, or is improperly shut off. No data will be
lost, but the parity re-initialization process may take several hours. NEVER disconnect AC power to
shutdown the server. Shutdown the system only by momentarily pressing the front panel power
button or selecting Start > Shutdown > Shutdown from the graphic user interface.
Note that in some cases the power may not automatically shut off after a Shutdown is
executed. When the front panel LED indicators start flashing in response to the Shutdown
command, the file system has been successfully closed and it is safe to force the power off by
holding the Reset switch in for four seconds.
A degraded array with a drive listed as “Not In Service” or “Inaccessible” is usually indicative
of a permanent drive error, typically a single disk or cable failure, but redundant data will allow
normal operations to continue. You may first try to rebuild the array with the existing drive still
installed. If the array continues to indicate a failed drive, replace the drive and then rebuild the
array. A hard disk array must be repaired using exactly the same drive model and capacity as other
drives in the array. Because specific drive models become unavailable as time goes on, 360
Systems recommends that maintenance spares be purchased at the same time as the Image Server.
Page 94
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Log-In to the RAID Utilities
Figure 39 - RAID Utilities Login Screen
To log in to the RAID utilities, perform the following steps. The above screen will appear.
•
•
•
Open the RAID utilities by selecting START>RAID STATUS
In the Login window, enter ADMINISTRATOR.
In the Password window, make no entry; leave it blank. In the event this does not work,
use the password “3ware”.
•
Click the Login button to enter the Login Utilities.
MAXX-2400HD Owner’s Manual
Page 95
Download from Www.Somanuals.com. All Manuals Search And Download.
Determining the Condition of the RAID Array
Figure 40 - RAID Array Condition Screen
To replace a failed drive in the RAID control utility, perform the following steps. The above
screen should appear.
•
•
•
Login as ADMINISTRATOR.
Note the ERROR STATUS on this Summary Screen.
If an error condition is indicated continue to next page.
Page 96
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the Alarm Log of the Raid Array
Figure 41 - RAID Alarm Log Screen
The RAID controller keeps track of any condition that would adversely affect its reliability. In
the event that an error should occur, the alarm log will be helpful in diagnosing the problem.
The above screen will appear.
•
•
Select MONITOR>ALARMS from the screen.
Make note of any error conditions reported, and what Port numbers they refer to.
Some examples of error messages are:
Drive Timeout Error – The drive failed to respond to a command from the controller within the
allotted time. This is sometimes a benign condition, but often indicates a hardware problem
with the drive.
Drive Error – The drive reported a data error. A rare isolated occurrence may be acceptable,
but probably indicates a drive failure.
Drive SMART Threshold Exceeded – The drive’s self diagnostic program is reporting an
impending drive failure. The drive should be replaced.
Remapping Bad Sector – This is a normal function of a hard drive’s self maintenance. As a
drive ages it is normal for sectors to fail, these are reassigned to a different part of the drive.
Several may occur within a very short period (seconds to a few minutes.). Multiple such errors
within a few days may indicate an impending drive failure.
Unclean Shutdown Detected – Power was lost without an orderly shutdown sequence, and
the parity information was not updated.
MAXX-2400HD Owner’s Manual
Page 97
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Status of the Drives
Figure 42 - RAID Array Maintenance Screen
To check the status of the RAID drive array, perform the following steps. The above screen
should appear.
•
•
Select MANAGEMENT>MAINTENANCE.
Note the status of each drive in the array.
Page 98
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Degraded Drive from the RAID Unit
Figure 43 - Removing Failed Drive from Array
The UNIT MAINTENANCE SCREEN above will appear.
•
•
Remove the degraded drive from the menu by clicking Remove Drive.
Select the Rescan Controller option on the above screen to have the system recognize the
drive as Available.
MAXX-2400HD Owner’s Manual
Page 99
Download from Www.Somanuals.com. All Manuals Search And Download.
Rebuilding the RAID Array
Figure 44 - Selecting a drive to rebuild
Select Rebuild Unit. The REBUILD SCREEN above will appear.
•
•
•
Select the available drive by clicking the check box.
Press OK. The RAID array will begin rebuilding with the new drive. This process may take
a long time, but the Image Server can still be used.
•
When complete, OK will be shown in the status for all ports on the MAINTENANCE menu.
Page 100
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Hard Drives
Maxx 2400HD Hard Drives are hot-swappable, meaning they can be replaced “on-the-fly”
without loss of data or interruption of server operation.
To replace a drive:
A. Loosen the knurled screws fastening the front panel. Pull forward and down to expose the
drive.
B. Remove the drive by pulling on the blue lever to unlatch the drive. Refer to Figure 45.
Remove the drive from the tray and replace it with the replacement drive.
C. With the blue latch still extended, gently slide the tray into the bay until you feel it “seat”.
Press on the latch to lock the drive into place. Return the panel to its normal position.
Figure 45 - Front Panel Opened – Disk Unlatched
MAXX-2400HD Owner’s Manual
Page 101
Download from Www.Somanuals.com. All Manuals Search And Download.
RAID Controller Settings
The server RAID controller is configured at the factory. The following is provided only to verify
these settings and to recreate them if necessary in the event the system is rebuilt. (The software
installation should configure these correctly, but they should be checked to verify accuracy.)
Do not use the Scheduled Events, Email Announcement or Remote Login features.
These settings are critical to proper operation of the system. The only parameter that can be
changed is “Continue on Source Error during Rebuild” which when turned on relaxes the condition
that any error found in the source material will stop the rebuild process.
It is particularly critical that the Write Cache be checked.
Page 102
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Channel Audio
Audio Input/Output Modules
In addition to embedded audio, provided as a standard feature on the MAXX-2400HD, an
analog audio and a digital audio I/O module are available as optional accessories. Each
provides for a total of eight audio channels on XLR-3 connectors, for each video input or
output.
DXP-2 Digital Audio Module
The DXP-2 Digital Audio Module provides 8 audio channels in AES/EBU format, for each video
input or output. It is housed in a 2-RU rack-mount enclosure (3½” – 88mm height), which
connects to the server chassis with a 1-meter, 68-pin cable included with the DXP-2. The DXP-
2 is self-powered from AC mains, and contains all audio circuitry. (It is not a connector ‘break-
out box’.)
DXP-2 Digital Audio I/O Module
Audio outputs from the DXP-2 duplicate the embedded digital audio contained in the video.
They are at a fixed 48 KHz sample rate, and are normally referenced to video genlock. Digital
audio input signals should also be at 48 kHz, and be derived from video genlock.
When used in combination with DXP-2, the MAXX-2400HD can record, store, and play
compressed or specially-encoded digital audio such as Dolby®-E, AC-3, or DTS®, using 360
Systems’ Bit-for-Bit® technology. The output data stream remains identical to the input data.
The DXP-2 contains dual redundant power supplies operated from two separate AC mains
connections. Either power input can be lost, with no effect on audio throughput. Two blue
LEDs indicate operation of the power supplies. There are no other controls or adjustments on
the DXP-2.
MAXX-2400HD Owner’s Manual
Page 103
Download from Www.Somanuals.com. All Manuals Search And Download.
DXP-2 Technical Specifications
Digital Audio Module
Audio channels
Audio format
8 per video channel (3 outputs x 8, 1 input x 8)
AES/EBU
Word Size
24-bit
Sampling Frequency
Audio connector
Data connection to server
Audio synchronization
Dolby® compatibility
Dimensions
48 kHz
XLR-3, gold plated
68-pin x 1-meter cable connects DXP-2 to MAXX-2400HD
Derived from video genlock
Bit-for-Bit® reproduction of compressed audio data
3½” x 19” x 5¼“ [90 x 483 x 133mm] HWD.
8 lb [3.6 kg] net
Weight
Power
Power supplies
Cooling
100 – 240 volts, 50/60 Hz, 50 watts
Modular, dual, redundant with separate IEC AC mains connectors
Convection
Operating temperature
Approvals
40º F to 85º F [4ºC to 29ºC]
RoHS compliant
Country of manufacture
U.S.A.
AXP-3 Analog Audio Module
The AXP-3 Analog Audio Module provides 4 channels of balanced, +4 dBu analog audio on
XLR connectors, for each video input or output. The AXP-4 Analog Audio Module may also be
used in conjunction with the AXP-3, providing 4 additional audio channels—normally channels
4 through 8. Audio outputs from the AXP-3 and AXP-4 exactly duplicate embedded audio
contained within a video stream.
The AXP modules are housed in a 2-RU rack-mount enclosures (3½” – 88mm high), which
connect to the main server chassis with a 1-meter, 68-pin cable, included with the AXP. The
module is self-powered from AC mains, and contains all audio circuitry. (It is not a connector
‘break-out box’.)
AXP-3 Analog Audio I/O Module
The AXP modules contain dual redundant power supplies, operating from two separate AC
mains connections. Either power input can be lost with no effect on audio throughput. Two
blue LEDs indicate operation of the power supplies.
Precision internal trimmers allow input-output gain to be adjusted by ±1 dB. There are no
external controls or adjustments on the AXP modules.
Page 104
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
AXP3/AXP4 Technical Specifications
Analog Audio Module
Audio channels
Word Size
4 per video channel
24-bit
Sampling Frequency
SNR
THD+N
48 kHz
> 106 dB A-wtd. Ref to FS –1 dB
< .01%
Input impedance
Output impedance
Headroom
Audio connector
Data connection
Dimensions
Z=10 k-ohm per leg
Z-50 ohm per leg
20 dB above nominal +4 dBu operating level
XLR-3, gold plated
68-pin x 1-meter cable connects AXP to MAXX-2400HD
3½” x 19” x 5¼“ [90 x 483 x 133mm] HWD.
8 lb [3.6 kg] net
Weight
Power
Power supplies
Cooling
100 – 240 volts, 50/60 Hz, 50 watts
Modular, dual, redundant with separate IEC AC mains connectors
Convection
Operating temperature
Approvals
40º F to 85º F [4ºC to 29ºC]
RoHS compliant
Country of manufacture
U.S.A.
MAXX-2400HD Owner’s Manual
Page 105
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Fault Diagnostics
Front Panel Indicators
The five LED indicators on the front panel are used to diagnose server fault conditions. The
meaning of each indicator is noted in the following table. During normal operation, all five LEDs
will be on.
GENLOCK
OFF indicates that the Genlock setting Check the Genlock setting in the On-
in the System menu is “Internal”
Screen System menu.
FLASHING indicates that Genlock is
selected in the System menu, but
there is no signal, or an invalid signal,
at the GENLOCK input connector.
Check the Genlock cable connections
or signal.
POWER
FANS
FLASHING indicates that there is a
fault in the system power supply.
Shut down the server and contact 360
Systems Customer Support for further
hardware diagnosis.
FLASHING indicates that there is a
fault of the internal chassis fan.
Check the chassis fan operation.
Replace if necessary. Do not run the
server without a working fan.
DRIVES
SYSTEM
FLASHING indicates that there is a
fault in the system RAID array.
Check the RAID array status using
the utility under
START >RAID STATUS.
FLASHING indicates that the CPU fan Shut down the server and contact 360
is running slow, or stopped; or that the Systems Customer Support for further
CPU temperature or voltage is not
within manufacturer’s specification.
hardware diagnosis.
Repairs should be performed only by qualified electronics
technicians.
Page 106
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Gigabit Ethernet Indicators
The Gigabit Network Port card has the following indicator lights:
Label
Indication
Green on
Green flashing
Meaning
The port is connected to a valid link partner
Data activity
ACT/LNK
(Left)
Off
No link
10=OFF
100=GREEN
1000=YELLOW
(Right)
Off
Green
10 Mb/sec
100 Mb/sec
Yellow
1000 Mb/sec
Access To Components
Be certain to shut down the server and disconnect the power cord before
opening the unit for service.
The following sections provide instruction on disassembly and re-assembly for maintenance.
Opening the Front Panel
The front panel is easily opened for access to the twelve disk drives, or for removing the server
from an equipment rack. Using a coin or a flat-blade screwdriver, unscrew the two large panel
fasteners on the left and right sides of the face panel. Pull outward and down to remove cover.
To re-install the front panel, verify that all wires are within the chassis, then place the front
panel into position and tighten the front panel access screws just enough to be snug.
Removing the Top Cover
Press down on the two latch buttons, slide the cover toward the rear of the chassis, then lift.
MAXX-2400HD Owner’s Manual
Page 107
Download from Www.Somanuals.com. All Manuals Search And Download.
General Handling Precautions
ESD Precautions
Observe electrostatic discharge (ESD) precautions to avoid
damaging static-sensitive components when handling any
PC card or disk drive.
•
When the case of your server is open and its internal parts are exposed, do not touch any
internal part without first grounding yourself to the chassis.
•
•
•
•
•
Always wear a ground strap or work on an ESD-protective mat.
DO NOT remove components from protective packaging until you are properly grounded.
Handle printed circuit boards by their edges or by the metal bracket.
Don’t touch any pin, contact, lead or component on the printed circuit boards.
Keep disk drives in their anti-static package until installed in the server.
Mechanical Concerns
•
•
•
•
•
Be careful when installing I/O cards into your system. Excessive force can damage the PC
boards, cables or the motherboard.
Be sure each board is aligned with its slot in the mating connector before installing. Use care
to not flex any PC boards.
Interface cable connectors must be mated carefully. Use care to not bend any of the pins. The
connectors provided are keyed to prevent upside-down insertion.
Interface cables are fragile and must not be pinched. Ensure that their dress does not restrict
airflow from fans or heat sinks within the enclosure.
Prior to installation, keep disk drives stored in a foam-lined protective carton to protect them
from physical damage.
Installing/Removing I/O Cards
Refer to separate maintenance documents on the MAXX-2400HD. Any repair, adjustment or
service operation must be performed by a qualified technician.
Page 108
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Updates From CD-Rom
Program updates for MAXX-2400HD may be issued periodically. The operating system and
application programs can be updated with the internal CD-ROM drive. The current software
version may be determined by looking in the GUI Help>About dialog box.
To install a program update, follow these instructions. Please read completely before beginning.
1. Open the server front panel. The internal CD-ROM drive is located on the left side.
2. With power applied, press the eject button on the drive. The drawer will open a short
distance. Gently pull the drawer open and insert a new CD-ROM upgrade disk, printed
side up. Push the drawer closed until it latches.
3. Press the front panel power switch briefly to shutdown the Image Server.
4. Wait 5 seconds, then press the front panel switch again to boot from the CD.
5. The Installer menu provides a choice to update the server operating system, begin a new
complete install, or cancel the install.
•
Choose UPDATE if you want to keep the video and audio clip files that exist on the
server. Use this selection for all normal software updates.
•
Choose NEW only if you want to partition and reformat the drive array, and install the
new operating system.
IMPORTANT! Using the NEW option will irrevocably delete all video and audio files.
For normal software upgrades, use the UPDATE option, and not NEW. The use of the NEW
option is REQUIRED if the RAID Array is being created for the first time. This would usually
occur the first time new disks are installed.
6. The message, “Please wait while software is being installed” will appear with an activity
indicator. When installation is complete, the server will automatically reboot from its hard
disk array, and will display a copyright notice while starting up. It will also release the CD
drawer. Be sure to remove the CD. DO NOT leave it in the drive.
7. Replace the front panel. Tighten the two large access screws.
If a disk cannot be ejected because the system is not responding or is powered off, the CD-ROM
drawer can be released by inserting a paper clip into the small hole on the front of the drive.
MAXX-2400HD Owner’s Manual
Page 109
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Updates from USB Memory
Program updates for the MAXX-2400HD may be issued from time to time. The server’s operating
system and application programs can be updated by the user from a USB Flash Drive distributed by
360 Systems. The current software version is determined by looking in the GUI Help>About
dialog box.
To install a program update, follow these instructions. Please read them completely before
beginning.
1. Discontinue all record, play, network transfer or system-level operations.
2. With power applied, insert a 360 Systems USB Flash Drive into a USB a socket.
3. Press the front panel power switch briefly to shutdown the server.
4. Wait 5 seconds, then press the front panel power switch again to boot from the USB
Flash Drive.
5. The Installer menu provides a choice to Update the server operating system, begin a
new complete install, or cancel the install.
•
Choose UPDATE if you want to keep the video and audio clip files that exist on
the server. Use this selection for all normal software updates.
•
Choose NEW only if you want to partition and reformat the drive array, and
install the new operating system.
IMPORTANT! Using the NEW option will destroy all video and audio files on
the server. For normal software upgrades, use the UPDATE option instead of
NEW.
6. The message, “Please wait while server is being installed” will appear with an activity
indicator. When installation is complete, the server will automatically reboot from its
hard disk array, and will display a copyright notice while starting up.
7. IMPORTANT! Remove the USB Flash Drive. Never leave it plugged into the server.
Page 110
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Updating Firmware
Firmware is low-level code used by the video hardware; it is not server operating system
software. If a software update is to be performed as well, install it first unless instructions that came
with the software update specifically require loading a particular version of firmware. This
procedure must be done from the local GUI; it cannot be done at a Remote Workstation. The
following operation should only be undertaken by competent computer technician.
To update the firmware:
1. Power off the MAXX 2400HD server by selecting Start > Shutdown > Shutdown. Power
on again, using the front panel RESET button, accessible through the small hole near the
LEDs.
2. Once the server has finished initializing, close the GUI by clicking the ‘close’ button at the
upper right corner of the main window.
3. Open a terminal window by holding the Shift and Control keys and pressing the F12 key
on the keyboard. Stop the server application by typing:
killall app Enter
4. Insert the flash memory stick that was supplied with the firmware. Wait several seconds for
the system to recognize the flash drive.
5. In the terminal window, type: loadflash Enter
You will see messages like the following:
MAXX-2400HD Owner’s Manual
Page 111
Download from Www.Somanuals.com. All Manuals Search And Download.
After each bank is loaded, you should see the message “Verify complete”.
The procedure will continue, and finally end with the prompt and cursor:
If any of the banks indicate an error during the erase, verify, or programming phases,
IMMEDIATELY repeat the operation “loadflash Enter” without doing any other operation.
If the procedure still fails, perform this entire procedure again. Should you still encounter a
problem, please contact 360 Systems technical support.
Page 112
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing a Hard Drive
Do not remove a hard drive from the server unless the diagnostic software identifies a
permanent fault. In that event, the front panel DRIVES LED will blink. Use the hard disk
management tools to verify that a drive is at fault. The application monitors many things about the
array and individual drives, and will clearly indicate whether a drive has failed.
CAUTION: Do not install drives that were not received from 360 Systems.
CAUTION: All drives in the RAID array must be identical.
Each hard drive slot is numbered 0 through 11, as are the drives. If for any reason one or
more drives have been removed, they must be reinstalled in the same location, the drive number
matching the numbered location. Installation in the wrong location will destroy data stored on all
the drives.
1. Shutdown the server using the front panel button. After it has shut down, turn off the rear
AC power switch.
2. Remove the front panel as described above.
3. Unplug the 4-conductor power connector, and the wide data connector from the drive.
4. Pull the black knob to release the drive carrier. The knob will pop out slightly; it is not
removable.
5. To install a new drive, slide its mounting plate into the correct position in the drive shelf,
and push the black knob in until it clicks. The drive is now secured. Reattach the power
and data cables.
6. Replace the front panel and tighten the two thumb screws until they are just snug.
7. Turn on the rear panel AC switch.
8. Turn the system ON using the front panel button, and check the RAID array status.
9. Verify correct operation of the server.
Factory Repair Policy
A video server being returned under warranty shall be sent to 360 Systems, freight prepaid, in
the original or equivalent packaging. Call 360 Systems for a return authorization number before
returning a product. Have your serial number and software version number available for reference.
Use the following address for shipping and correspondence. 360 Systems’ offices are open
Monday through Friday, from 8:30 AM to 5:00 PM, Pacific Time.
360 Systems
Telephone (818) 991-0360
Customer Service Dept.
31355 Agoura Road
Westlake Village, CA 91361
Fax
E-mail
Website
(818) 991-1360
www.360systems.com
MAXX-2400HD Owner’s Manual
Page 113
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Certifications
Safety
The server was tested by Underwriters Laboratories and found to comply with the following
safety standards:
EN 60950, 3rd Edition, dated December 1, 2000, Standard for Safety of Information
Technology Equipment, Including Electrical Business Equipment.
Radio Interference Compliance
Radio Interference (USA)
WARNING: This equipment has been tested and found to comply with the limits for Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction's manual, may cause interference to radio
communications. Operation of this equipment in a residential area is likely to cause interference
in which case the user will be required to correct the interference at his own expense.
The user is cautioned that changes and modifications made to the equipment without approval
of the manufacturer could void the user's authority to operate this equipment.
It is suggested that the user use only shielded and grounded cables to ensure compliance with
FCC Rules.
FCC Emission Limits
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesirable operation.
Radio Interference (Canada)
English: This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Français: Cet appariel numérique de la classe A respecte toute les exigences du Reglement sur
le matériel brouilleur du Canada
RoHS Compliance
This product is in compliance with the Hazardous Substances in Electrical and Electronic
Equipment directive (RoHS) - 2002/95/EC. The materials and substances listed in the RoHS
directive, specifically lead, mercury, cadmium, hexavalent chromium, PBB and PBDE's, are not
intentionally added to, or believed to be contained in this product.
CE Mark
Testing to be completed before shipment to the EU.
Page 114
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Warranty
Limited Warranty
Thisproductiswarrantedtotheoriginalpurchaseragainstdefectsinmaterialandworkmanshipforaperiodofone
yearfromthedateoforiginalpurchase. Thiswarrantycoverspartsandlaborandiseffectivewhentheproductis
usedwithoutalterationforthepurposeintendedby360Systems. Thiswarrantyexcludesproductswithmodifiedor
unauthorizedsoftware,thathavebeensubjecttomisuseorneglect,thathavebeenmodified,repairedimproperlyor
byunauthorizedpersonnel,damagedbyroughhandling,abuse,improperoperation,excessivetemperature,
lightningstrike,staticelectricity,electricalsurgesorotherelectricalsystemmalfunctions,improperorinadequate
maintenanceorcareandthathavebeensubjecttouseofunauthorizedornon-conformingaccessoriesor
attachments. Thiswarrantyalsoexcludesnormalwearanddeteriorationoccasionedbytheuseoftheproduct.
Ifpartoftheproductisdefective,theentireproductmustbereturnedalongwiththeoriginalpurchasereceiptor
otherevidenceofpurchaseandadescriptionofthedefectto360Systems,31355AgouraRoad,WestlakeVillage,
California91361. Uponreceipt,itsconditionwillbeverified,andiftheproductqualifiesforwarrantycoverage,360
Systemswill,atitsoption,repairorreplacetheproductwithoutcharge. Inthecaseofreplacement,ifthe
replacementforadefectiveproductisnolongeravailable,360Systemswillreplaceitwithasimilarproductor,if
notavailable,aproductofequalvalue.
DISCLAIMERANDLIMITATIONOFLIABILITY
Theliabilityof360Systemsundertheforegoingwarrantyislimitedsolelytotherepairorreplacementofdefective
materialorworkmanshipanddoesnotincludeanyexpenserelatedtotheshipmentoftheproducttoorfrom360
Systemsorcompensationforanyinconvenienceorlossofuseoftheproductwhileitisbeingrepairedorreplaced.
EXCEPTASEXPRESSLYSTATEDHEREIN,360SYSTEMSEXPRESSLYDISCLAIMSALLWARRANTIES,EXPRESS
ORIMPLIED,OFANYKINDWITHRESPECTTOTHEPRODUCT,INCLUDINGWITHOUTLIMITATION
WARRANTIESOFMERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSE.
BYPURCHASEORUSEOFTHISPRODUCT,THEOWNER/OPERATORASSUMESSOLERESPONSIBILITY
FOROBTAININGLICENSESand/orPATENTSASSOCIATEDWITHITSOWNERSHIP,BROADCASTING,
RENTAL,ORANYOTHERUSEOFSAIDPRODUCT. THEOWNER/OPERATORISSOLELYLIABLEFORANY
BREACHOFTHATRESPONSIBILITYANDSHALLINDEMNIFYANDHOLD360SYSTEMSHARMLESS
FROMANYANDALLCLAIMSTHATMAYARISEINREGARDTOANYSUCHLICENSESand/orPATENTS,
INCLUDINGTHIRDPARTYPATENTCLAIMS.THISPROVISIONSHALLTAKEPRECEDENCEOVERANY
PROVISIONSTOTHECONTRARYINOWNER/OPERATOR’SPURCHASEORDERSOROTHER
DOCUMENTS.
360SYSTEMS’SOLELIABILITYUNDERTHISLIMITEDWARRANTYSHALLBETHEREPAIROR
REPLACEMENTOFANYDEFECTIVEPRODUCTORITSCOMPONENTSDURINGTHEWARRANTY
PERIOD. INNOEVENTSHALL360SYSTEMS,ITSDIRECTORS,OFFICERS,EMPLOYEESOR
REPRESENTATIVESBELIABLEFORDIRECT,CONSEQUENTIAL,PUNITIVE,SPECIALORINDIRECT
DAMAGES,LOSSOFPROFITS,INCONVENIENCEORANYOTHERLOSSESDUETOTHEPRODUCTORITS
OPERATION,ORITSFAILURETOOPERATEINACCORDANCEWITHITSSPECIFICATIONS.
Somestatesorregionsdonotallowtheexclusionorlimitationofincidentalorconsequentialdamagesundercertain
circumstances,sotheabovelimitationsandexclusionsmaynotapplytoyou. Thiswarrantygivesyouspecificlegal
rights,andyoumayalsohaveotherrightswhichvaryfromstatetostateorregiontoregion.
MAXX-2400HD Owner’s Manual
Page 115
Download from Www.Somanuals.com. All Manuals Search And Download.
End User License Agreement
For Server Software
IMPORTANT
THIS IS A LEGAL AGREEMENT BETWEEN YOU (“YOU”) AND 360 SYSTEMS® (“COMPANY”).
COMPANY IS WILLING TO LICENSE THE SERVER SOFTWARE TO YOU ONLY UPON THE
CONDITION THAT YOU ACCEPT ALL OF THE TERMS CONTAINED IN THIS SOFTWARE
LICENSE AGREEMENT (“AGREEMENT”). PLEASE READ THE TERMS CAREFULLY BEFORE
OPENING THIS PACKAGE, OR IF DOWNLOADED, BEFORE INSTALLING THE SOFTWARE, AS
OPENING THE PACKAGE, OR IN THE CASE OF DOWNLOADED SOFTWARE, INSTALLING IT,
WILL INDICATE YOUR ASSENT TO THEM. IF YOU DO NOT AGREE TO THE LICENSE TERMS,
THEN COMPANY IS UNWILLING TO LICENSE THE SOFTWARE TO YOU, IN WHICH EVENT
YOU MAY RETURN THE UNOPENED SOFTWARE PACKAGE TO THE PLACE FROM WHICH IT
WAS ACQUIRED WITHIN 14 DAYS OF THE DATE OF PURCHASE AND YOUR MONEY WILL
BE REFUNDED. IF YOU ARE VIEWING THIS AGREEMENT ELECTRONICALLY, SELECT THE
“ACCEPT” BUTTON AT THE BOTTOM OF THIS PAGE TO INDICATE YOUR ACCEPTANCE OF
THE TERMS OF THIS AGREEMENT. IF YOU ARE NOT WILLING TO BE BOUND BY ITS TERMS,
SELECT THE “DECLINE” BUTTON AT THE BOTTOM OF THIS PAGE AND THE REGISTRATION
OR INSTALLATION PROCESS WILL NOT CONTINUE.
1. Company grants to You a non-exclusive license to use the server software program (the “Software”) and
any accompanying documentation (“Documentation”) solely for your internal business needs pursuant
the terms and conditions of this Agreement. The license to use the Software is conditioned upon Your
compliance with the terms of this Agreement. You shall be solely responsible for installation of the
Software.
2. Your use of the Software is limited to the licensing option set forth on your invoice. Each licensing
option is defined as follows:
Single User License. Software provided to You under this option may only be installed on any server
owned or controlled by You, but in no event may it be used on more than one server at the same time.
Multiple User License. Software provided under this option may be installed on more than one server
owned or controlled by You, the maximum number of which is indicated on the purchase invoice for
this Software.
3. You may not transfer the Software to another entity or person. Any such transfer terminates your license
under this Agreement. You shall not modify, translate, reverse assemble or reverse compile in whole or
in part the Software that is provided in object code. You may not rent, sell, time-share, lease, sublicense,
transfer, publish, disclose, display, or otherwise make available the object code or copies thereof to
others. You may not make copies of the object code except as provided herein. You shall not tamper
with, bypass or alter any security features of the Software or attempt to do so.
4. This license is not a sale. Title, ownership rights, and intellectual property rights in and to the Software
and Documentation shall remain with the Company. You agree to abide by the copyright laws and all
other applicable laws of the United States, your country, and international law. You acknowledge that
the Software design remains a confidential trade secret of Company. Failure to comply with the above
restrictions will result in automatic termination of this license and will make available to Company other
legal remedies. You may not disclose any of Company’s proprietary or trade secret information relating
to the Software to any third party.
Page 116
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Company warrants that the Software will perform substantially in accordance with its Documentation.
Your exclusive remedy for breach of this limited warranty and Company’s entire liability shall be, in
Company’s discretion, either return of the price paid to Company by You for the Software, or repair or
replacement of the Software after Software and Documentation are returned to Company with an
applicable receipt. Company’s warranty is void if failure of the Software has resulted from accident,
abuse, modification or misapplication. COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR
IMPLIED, WITH RESPECT TO THE SOFTWARE AND DOCUMENTATION, AND SPECIFICALLY
DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. COMPANY DOES NOT WARRANT THAT THE OPERATION OF THE SOFTWARE WILL BE
UNINTERRUPTED OR ERROR FREE.
6. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL COMPANY BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES WHATSOEVER,
INCLUDING ANY CLAIMS FOR LOST PROFITS, BUSINESS INTERRUPTION, LOST INFORMATION
OR OTHER DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE. IN ALL
EVENTS, COMPANY’S SOLE OBLIGATION OR LIABILITY UNDER THIS LICENSE IS THE
REPLACEMENT OR REPAIR OF THE SOFTWARE OR A REFUND OF THE PURCHASE PRICE.
7. You may terminate the license granted in Section 1 of this Agreement at any time by destroying or
erasing your copy of the Software. Company may terminate this Agreement immediately and without
notice if you fail to comply with any term or condition of this Agreement. In the event of termination of
this Agreement, all the sections of this Agreement will survive except for Section 1.
8. This Agreement shall be governed by and construed in accordance with the laws of the State of
California, U.S.A., without reference to conflicts of laws provisions or the 1980 U. N. Convention on
Contracts for the International Sale of Goods and, as to matters affecting copyrights, trademarks and
patents, by U.S. federal law. Any dispute with respect to this Agreement shall be brought and heard
either in the California state courts located in Los Angeles County, California, or the federal district court
for the Central District, Western Division, located in Los Angeles, California. In such event, the parties
to this Agreement each consent to the in personam jurisdiction and venue of such courts. The parties
agree that service of process upon them in any such action may be made if delivered in person, by
courier service, by telegram, by facsimile or by first class mail, and shall be deemed effectively given
upon receipt.
9. This Agreement sets forth the entire agreement between You and Company pertaining to the licensing of
the Software, and supersedes in its entirety any and all written or oral agreements previously existing
between the parties with respect to such subject matter. If any provision of this Agreement is held
invalid or unenforceable, such provision shall be revised to the extent necessary to cure the invalidity or
unenforceability, and the remainder of this Agreement shall continue in full force and effect. In the
event of any conflict between any provision of this Agreement and applicable law, the provisions of this
Agreement affected shall be modified to remove such conflict and permit compliance with such law, and
as so modified this Agreement shall continue in full force and effect. This Agreement may not be
assigned without the consent of Company.
MAXX-2400HD Owner’s Manual
Page 117
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Connector Specifications
Audio XLR-3 Connector Pinout
Signals appearing on XLR connectors of the DXP-1, AXP-3 or AXP-4 multi-channel audio modules
conform to the following wiring standard.
Pin
BALANCED ANALOG
SHIELD (FRAME GROUND)
" + " OR HOT
AES/EBU DIGITAL
1
SHIELD (FRAME GROUND)
2
3
DIGITAL
DIGITAL
+
-
" – " OR COMMON
FRAME GROUND
SHELL
FRAME GROUND
Serial Control Connector Pinout
Pin
DB9-F Connector
GND
1
2
Transmit A (TX–)
Receive B (RX+)
GND
3
4
5
N/C
6
7
GND
Transmit B (TX+)
Receive A (RX-)
GND
8
9
Shell
Frame ground
Page 118
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
BNC Connectors
The following note applies to all video and Genlock connectors:
•
•
A BNC connector used as an output has a 75-ohm source impedance.
A BNC connector used as an input has a 75-ohm termination.
GPIO Connectors
General purpose control inputs (GPI) may be applied to the GPIO connectors, which are
DB-25 pin connectors. These inputs are optically isolated from the server circuitry; individual
floating returns are provided. +5 volts may be sourced from pins 18 or 26, or provided from an
external source. Current limiting devices are provided within the server.
General purpose status outputs also appear on the GPIO connectors. Open-collector outputs
are provided as status outputs, and may be used to drive an external LED or control input.
Refer to the connector pin-out table and partial schematic, following. Inputs and outputs 1-6
are on connector 1, 7-12 are on connector 2, shown in parentheses. The schematic applies to both
connectors as well.
GPI Connector Pinout
Pin
Signal
Pin
Signal
2
4
GPI 1 (GPI 7)
GPI 2 (GPI 8)
1
3
GPI 1 RTN (GPI 7 RTN)
GPI 2 RTN (GPI 8 RTN)
6
8
GPI 3 (GPI 9)
GPI 4 (GPI 10)
5
7
GPI 3 RTN (GPI 9 RTN)
GPI 4 RTN (GPI 10 RTN)
10
12
GPI 5 (GPI 11)
GPI 6 (GPI 12)
9
GPI 5 RTN (GPI 11 RTN)
GPI 6 RTN (GPI 12 RTN)
11
13,14
N/C
17
N/C
15, 16, 19
GND
18, 26
+5V SOURCE (200
MA
MAX)
20
GPO 1 (GPO 7)
21
GPO 2 (GPO 8)
22
24
GPO 3 (GPO 9)
GPO 5 (GPO 11)
23
25
GPO 4 (GPO 10)
GPO 6 (GPO 12)
MAXX-2400HD Owner’s Manual
Page 119
Download from Www.Somanuals.com. All Manuals Search And Download.
GPI/O (DB-25)
INTERNAL CIRCUITS
1K
1K
1K
1K
1K
1K
GPI 1
2
1
GPI 1 RTN
GPI 2
4
3
GPI 2 RTN
GPI 3
6
5
GPI 3 RTN
INPUTS
GPI 4
8
7
GPI 4 RTN
GPI 5 10
GPI 5 RTN
9
GPI 6 12
GPI 6 RTN 11
GPO 1 20
GPO 2 21
GPO 3 22
GPO 4 23
GPO 5 24
GPO 6 25
OUTPUTS
18
+5V, 200mA MAX
SOURCE
26
1
5
SIGNAL GND 16
19
Figure 31: GPIO Connection Schematic
Page 120
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
System Board Ports
Standard computer I/O ports on the server include video monitor, keyboard, mouse, and
Gigabit Ethernet. Pinouts are provided to assist in wiring or trouble-shooting.
Keyboard and Mouse
Keyboard and mouse ports are provided on the rear panel. Both ports are provided with a
resetable fuse protecting the +5V supply to the peripheral.
SVGA Ports
An SVGA computer monitor may be connected to the 15-pin video port. The server is pre-
configured to an SVGA screen resolution of 1024 x 768 and 64,000 colors. The refresh rate will
auto-negotiate with the attached monitor to achieve the best available value. This resolution is best
viewed on 17-inch or larger monitors. Use only VESA compliant monitors. 360 Systems does not
provide a monitor with the server.
SVGA Connector Pinout
Pin
1
Signal
RED
Pin
9
Signal
+5V
2
GREEN
BLUE
10
GND
3
11
RESERVED*
SDA
4
RESERVED*
GND
12
5
13
HSYNC
VSYNC
SCL
6
RED RTN
GREEN RTN
BLUE RTN
14
7
15
8
SHELL
FRAME GROUND
* Pulled high to +5V.
Unused Ports
USB ports and an RS-232 serial port are present on the server. These are not active and no
connection should be made to them. (USB ports may be used for software/firmware update devices
only. There are no provisions for USB keyboard, mouse or mass storage devices, and their use may
cause the server to operate improperly.)
MAXX-2400HD Owner’s Manual
Page 121
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
Serial Command Protocols
VDCP Command Table
The server responds to the following VDCP commands. Shaded areas indicate commands slated
for future implementation.
COMMAND FROM CONTROLLER RETURN FROM CONTROLLED DISK
CMD-1
0X / 8X
0X / 8X
CMD-2
15
NAME
CMD-1 CMD-2
NAME
ACK
Delete Protect ID
Undelete Protect ID
04
04
16
ACK
CMD-1
1X
CMD-2
00
NAME
Stop
CMD-1 CMD-2
NAME
ACK
04
04
04
1X
01
Play
ACK
1X
02
Record
ACK
1X
1X
1X
1X
1X
1X
04
05
06
07
08
0A
Still
04
04
04
04
04
04
ACK
ACK
ACK
ACK
ACK
ACK
Step
Continue
Jog
Varispeed Play
EE Mode
CMD-1
2X / AX
2X
CMD-2
1D
1E
1F
NAME
Rename ID
CMD-1 CMD-2
NAME
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
04
04
04
04
04
04
04
04
04
04
04
04
Preset Std. Time
New Copy
2X / AX
2X
20
Sort Mode
2X
21
Close Port
2X
22
Select Port
2X / AX
2X / AX
2X / AX
2X / AX
2X / AX
2X
23
Record Initialize
Play Cue
24
25
Cue with Data
Delete ID
26
2C
30
Record Init with Data
Preset
Page 122
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
CMD-1
3X
CMD-2
01
NAME
Open Port
CMD-1 CMD-2
NAME
Grant/Denied
List of ID's
3X
3X
3X
3X
3X
3X
3X
3X
3X
3X
3X
81
82
85
86
87
88
90
91
94
96
97
3X / BX
3X
02
Next
05
Port Status Request
Position Request
Active ID Request
Device Type Req.
Syst. Status Request
ID List
State Status
Position
3X
06
3X / BX
3X
07
Active ID
08
Device Type
System Status
List of ID's
3X
10
3X / BX
3X / BX
3X / BX
3X
11
14
ID Size Request
ID Request
ID Size
16
ID Presence
Compression Settings
17
Compression Settings
Request
3X / BX
3X / BX
18
19
ID's Added List
ID's Deleted List
3X
3X
98
99
List ID's Added
List ID's Deleted
AX and BX versions are long-filename variants.
Macro commands (5X/DX in CMD-1) are not implemented.
MAXX-2400HD Owner’s Manual
Page 123
Download from Www.Somanuals.com. All Manuals Search And Download.
BVW Serial Command Table
The server command set includes most BVW-type commands. Commands not implemented
include those for DMC operations, audio split and in/out points, and those specifically related to
tape as a medium.
COMMAND
00.11
DESCRIPTION
RETURN
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
COMMENT
DEVICE TYPE REQUEST
00.1D
LOCAL ENABLE
LOCAL DISABLE
STOP
00.0C
20.00
20.01
PLAY
20.02
RECORD
20.10
FAST FORWARD
JOG FORWARD
VAR FORWARD
SHUTTLE FORWARD
REWIND
2
2
2
X.11
X.12
X.13
20.20
2
2
2
X.21
X.22
X.23
JOG REVERSE
VAR REVERSE
SHUTTLE REVERSE
PRE-ROLL
20.30
20.0F
20.05
20.60
20.61
24.31
40.08
40.10
40.11
40.18
40.19
40.1A
40.1B
40.2D
41.36
41.37
44.00
44.04
44.31
41.33
N/A
EJECT
STANDBY
ON
FULL E-E OFF
FULL E-E ON
CUE
TIMER 1 RESET
ENTRY
OUT ENTRY
U
P
WITH DATA
I
N
I
I
N
N
SHIFT
SHIFT
+
-
OUT SHIFT
OUT SHIFT
+
-
LOST LOCK RESET
TIMER MODE SELECT
INPUT CHECK
TIMER 1 PRESET
TIME CODE PRESET
PRE-ROLL TIME PRESET
SERVO REFERENCE SELECT
TIMER MODE STATUS
STATUS DATA
7
X.20
7X.20
N/A
COMMAND SPEED SENSE
71.2E
ACK
40.48
40.49
REF VIDEO SELECT
ON
REF VIDEO SELECT OFF
CURRENT TIME SENSE
ACK
6
X.0E
ACK
ACK= 10.01 NAK=11.12.xx
Page 124
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Odetics® Protocol
Odetics serial protocol is an extension of BVW machine control protocol. Among its most
significant features is the selection of a file by name rather than by time-code location, as with
BVW. Odetics protocol is used by many table-top controllers and some automation systems.
Note that the Odetics protocol only supports clip names up to 8 characters. Longer clip
names are automatically filtered out from responses by the server.
ACK = 0X1001
COMMAND
DESCRIPTION
RETURN
COMMENT
0X1001
ACK
0
X000C
X0011
X001D
LOCAL DISABLE
DEVICE TYPE
LOCAL ENABLE
STOP
ACK
0X1211
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
0
BVW-75
0
0
0
0
0
0
X2000
X2001
X2002
X2004
X2005
PLAY
RECORD
STAND
STAND
B
B
Y
Y
OFF
O
N
0X200D
DMC START
EJECT
COMMAND HAS NO EFFECT
0
X200F
X2010
0
FAST FORWARD
JOG FORWARD
VAR FORWARD
SHUTTLE FORWARD
REWIND
0
0
0
X2X11
X2X12
X2X13
0
X2020
0
0
0
X2X21
X2X22
X2X23
JOG REVERSE
VAR REVERSE
SHUTTLE REVERSE
PREROLL
0
X2030
0
0
0
X2X31
X2X38
X2X39
CUE
UP
PROG SPEED PLAY PLUS
PROG SPEED PLAY MINUS
TENSION RELEASE
0
0
0
X2052
X2054
X2055
COMMAND HAS NO EFFECT
COMMAND HAS NO EFFECT
COMMAND HAS NO EFFECT
COMMAND HAS NO EFFECT
COMMAND HAS NO EFFECT
ANTI CLOG TIMER DISABLE
ANTI CLOG TIMER ENABLE
DMC SET FORWARD
DMC SET REVERSE
FULL EE OFF
0
X2X5C
X2X5D
0
0
X2060
0
X2061
FULL EE ON
MAXX-2400HD Owner’s Manual
Page 125
Download from Www.Somanuals.com. All Manuals Search And Download.
COMMAND
DESCRIPTION
RETURN
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
ACK
COMMENT
0
X4X00
X4X04
TIMER1 PRESET
0
TIME CODE PRESET
TIMER1 RESET
0X4008
0X4010
0X4011
I
N
ENTRY
OUT ENTRY
PRESET
OUT PRESET
0
X4X14
X4X15
IN
0
0
X4018
X4019
I
I
N
N
SHIFT PLUS
0
SHIFT MINUS
0
X401A
X401B
OUT SHIFT PLUS
OUT SHIFT MINUS
0
0
X4020
X4021
I
N
RESET
0
OUT RESET
0X402D
0X4X30
0X4X31
0X4X32
0X4X33
0X4X34
0X4X35
0X4X36
0X4X37
LOST LOCK RESET
EDIT PRESET
COMMAND HAS NO EFFECT
PRE-ROLL TIME PRESET
TAPE AUTO SELECT
SERVO REFERENCE SELECT
HEAD SELECT
COMMAND HAS NO EFFECT
COMMAND HAS NO EFFECT
COLOR FRAME SELECT
TIMER MODE SELECT
INPUT CHECK
0X4040
0X4041
0X4046
0X4047
0X4048
0X4049
AUTO MODE OFF
AUTO MODE
VARIABLE MEMORY OFF
VARIABLE MEMORY
VIDEO REFERENCE DISABLE OFF
ON
O
N
COMMAND HAS NO EFFECT
COMMAND HAS NO EFFECT
VIDEO REFERENCE DISABLE
VIDEO INPUT SELECT
ON
0X4X70
0X4X91
0X4X92
0X4X93
0X4X98
0X4X99
OUTPUT VIDEO LEVEL
COMMAND HAS NO EFFECT
COMMAND HAS NO EFFECT
COMMAND HAS NO EFFECT
COMMAND HAS NO EFFECT
COMMAND HAS NO EFFECT
COMMAND HAS NO EFFECT
OUTPUT SETUP BLACK LEVEL
OUTPUT CHROMA LEVEL
OUTPUT H PHASE
OUTPUT SC PHASE
OUTPUT VIDEO HUE
TC GEN DATA SENSE
GEN TIME DATA
0
X4X9A
X6X0A
0
0X7408
Page 126
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
COMMAND
DESCRIPTION
RETURN
0X7409
0X7809
COMMENT
GEN UB DATA
GEN U BAND TC DATA
CURRENT TIME SENSE
CORRECTED LTC TIME DATA
VITC TIME DATA
0X600C
0X7414
0X7406
0X7400
0X7415
0X7416
0X7410
0X7411
NAK
TIMER1 DATA
HOLD USER BITS LTC DATA
HOLD USER BITS VITC DATA
0X6010
0X6011
0X6012
0X6013
0X6020
I
N
DATA
OUT DATA
A
A
IN DATA
OUT DATA
NAK
STATUS DATA
0X7420
0X7423
0X712E
0X712F
NAK
0
X6X23
X602E
SIGNAL CONTROL DATA
COMMAND SPEED DATA
VAR MEM SPEED DATA
EDIT PRESET DATA
PREROLL TIME DATA
TIMER MODE STATUS
AUTO SKIP
0
0
X602F
X6X30
X6031
0x6036
XA001
0
0
0X7431
0X7136
ACK
0
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
ODETICS COMMAND
0
0
0
XAX02
XAX04
XAX05
CUE
U
P
T
O
RECORD
PRESET
ACK
PREVIEW
I
N
ACK
PREVIEW OUT PRESET
PREVIEW RESET
ACK
0
XA006
XA007
I
N
ACK
0
PREVIEW OUT RESET
ERASE ID
ACK
0XAX10
ACK
0
XA014
XA015
LIST FIRST ID
0X8814
0X8814
0X8818
0X891C
ACK
0
LIST NEXT ID
0XAX18
0XA01C
0XAX20
ID STATUS REQUEST
MAXIMUM STORAGE LENGTH
SET DEVICE ID
0
XA021
DEVICE ID REQUEST
0X8821
ACK
0XCX01
0XCX02
0XCX03
JUMP FORWARD
JUMP BACK FRAMES
GET LOADED ID
X
FRAMES
X
ACK
ACK
MAXX-2400HD Owner’s Manual
Page 127
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C
Technical Specifications
Video
Video Input
2 Channel
Video Outputs
4 Channels (2 are bidirectional)
HD-SDI, SMPTE 292M
Letterboxed composite video
1080i or 720p at 59.94 or 50 fps
JPEG-2000 to 125 Mb/Sec
Zero to 255X, forward/reverse
Zero to 2X, forward/reverse
HD Input/Output
Monitoring Outputs
HD Video Formats
Video Encoding
Jog/Shuttle
Slow Motion Play with audio
Channel Ganging
2, 3 or 4 -channel synchronized playback for key & fill or multi-screen display
Audio
Embedded Audio
8 channels – SMPTE 299M (per video channel)
DXP-1 Multi-channel
AES/EBU Module
Optional accessory. 8 AES/EBU digital audio channels per video input or
output. (4 AES/EBU pairs) XLR-3 connectors
AXP-3 Multi-channel Analog
Audio Module
Optional accessory. 4 analog audio channels (#1 thru 4) per video input or
output. Balanced, +4 dBu, XLR-3 connectors
AXP-4 Multi-channel Analog
Audio Module
DXP-1, AXP-X dimensions
Optional accessory. 4 analog audio channels (#5 thru 8) per video input or
output. Balanced, +4 dBu, XLR-3 connectors. For use with AXP-3 module.
3½” x 19” x 5¼“ [90 x 483 x 133mm] HWD. Weight: 8 lb [3.6 kg]
Program Storage
Disk Storage System
Storage time
Drive Replacement
Software upgrades
12 Terabyte Serial ATA array, 12 drives, RAID-6
240 hours approx. @ 80 Mb/sec
Front panel access
CD-ROM or USB key
Network Connectivity
File import/export
Remote GUI
As-Run Logs
Diagnostics
JPEG-2000 files via FTP
PC w/ Remote Workstation software
Ethernet transfer
Download of sequential events
Miscellaneous
Serial Control
VDCP, BVW, Odetics; 9-pin D
GPI
12 opto-isolated inputs, 12 open-collector outputs, 2 x 25-pin D
User selectable VANC. Any 6 lines within lines 8-22 (cc, AFD, etc)
SMPTE 170M; PAL: ITU-R BT.470 (blackburst)
Front Panel LEDs: power, genlock, fans, system, RAID status
Fault outputs on GPO
VBI & Ancillary Data
Genlock Input
Fault Monitoring LEDs
Fault Monitoring Output
Operating Systems
Linux®
Power & Mechanical
Power Supply
Mechanical
Cooling
100-240 V, 50/60 Hz, 400 W. Dual, modular, redundant
Rack mounting: 3.5” x 19” x 18.5” (90 x 483 x 470 mm) HWD.
Multiple fans
Weight
Approx 100 lbs (45 Kg) net
Agency Approvals
Country of Origin
UL, C-UL, FCC Class A, CE, RoHS
Made in U.S.A.
Page 128
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Shortcuts
Transport Control
Edit Operations
L
E
Enter/Exit Edit Mode
Capture Mark In
Capture Mark Out
Review Edit
Forward at 4x, 16x, 64x, 128x
Pause (Stop)
K
I
J
O
Reverse at 4x, 16x, 64x, 128x
Play/Pause (toggle)
Record
Space Bar
R
Shift+R
Shift+T
Review Tail
Home
GoTo Head point
Playlist
Home
Space
K
End
GoTo Tail point
E/E Toggle
Shift+E
Shift+L
Shift+C
Shift+J
Recue
Loop Toggle
Local Toggle
Eject Clip
Play/Pause
Stop
Playlist Edit
Shift+C
Right Arrow
Left Arrow
Jog forward 1 frame
Jog reverse 1 frame
Clear
Left Arrow
<< (Remove clip)
File Operations
Ctrl+N
Right Arrow
>> (Add clip)
New
Navigating Between Channels
Ctrl+O
Open
Switches to Transport
Ctrl+S
Ctrl+<number>
Alt+<number>
Save
Channel <number>
Switches to Playlist
Channel <number>
Ctrl+A
Ctrl+D
Ctrl+R
Save As
Delete
Mark In/Mark Out Times (Edit Mode)
Rename
<number>
Inserts right justified number
Menu Operations
Alt+F
DEL
Removes last digit
ESC
Expands File Menu
Aborts time code entry
Shifts time code left
Alt+T
. ; : (any)
Expands Transport Menu
Toggles between Mark In
and Mark Out times
Alt+C
Alt+P
Alt+W
Alt+H
TAB
Expands Configure Menu
Expands Playlist Menu
Expands Window Menu
Expands Help menu
MAXX-2400HD Owner’s Manual
Page 129
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D
Playlist Management Detail
Playlists can be accessed via the server’s FTP feature, allowing several capabilities:
•
•
•
Lists can be backed up on a PC, and sent to another server.
Lists can be viewed and printed from the PC
Lists can be edited or created on the PC and uploaded to the server.
Playlists are found on the server FTP directory in the lists folder. They are simple text files with
the extension .lst. Below is an example of a playlist as it appears in the GUI and its
corresponding .lst file:
Playlist Example
#360PLAYLIST 2.0
#StartTime 13000100
#Loop 0
"/Public Service Announcement"
"/Adverts/Commercial"
"<HOLD>", HOLD
"/Sitcom",#1@0;10
"/Movie of the Week",#2@15;1000,#6@1245000;400
"/Documentary", SKIP
"/Still Frame"
"/Still Frame 2", frames=150
Page 130
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Each line of the example appears with its explanation below:
#360PLAYLIST 2.0
Header line, this must always be present exactly as shown.
#StartTime 13000100
This is the Start Time in military format, hours, minutes, seconds and frames, without leading
zeros. This value shows 13:00:01 or 1 minute past 1 pm. The default is 0 which is 12 midnight.
While frames are present in this value, the last two digits should always be “00” when entering
any value except 0.
#Loop 0
This is the default, a looping list would show “#Loop 1”
.
"/Public Service Announcement"
This is the first clip in the list, named Public Service Announcement. It is enclosed in quotes,
and preceded by a forward slash ( / ) which denotes that the clip is found in the root directory
(i.e. it is not in a subfolder).
"/Adverts/Commercial"
This is the second clip, named Commercial. It is in the Adverts subfolder. Further levels of
subfolder nesting would be shown as “/Folder/Subfolder/ClipName”
.
"<HOLD>", HOLD
This is a Hold event. The list will stop until it is restarted by command.
"/Sitcom",#1@0;10
This clip has a GPI Output event associated with it, in this case Output #1, at an offset of 1
frame, for a duration of 10 frames. Similar to Start Time values, GPI Output Offsets and
Durations are represented as hours, minutes, seconds and frames without leading zeros. The
format is:
,#GPIOutputNumber@Offset;Duration
"/Movie of the Week",#2@15;1000,#6@1245015;400
This clip has two GPI Output events, Output #2 @ 15 frames offset ; 10 seconds duration, and
#6@1 hour 24 minutes 50 seconds 15 frames offset; 4 seconds duration.
"/Documentary", SKIP
This clip is skipped, this is programmed in the GUI by unchecking the check box for the event.
"/Still Frame"
Still frames appear the same as standard motion clips; the name of this clip is Still Frame.
"/Still Frame 2", frames=150
This still frame has a duration programmed. Unlike other time values, durations are frame
counts. At 59.94 Hz, this is a 5 second duration. While it is possible to add a duration to a
motion clip, this is not recommended. It is only allowed to specify fewer frames than the
edited length of the clip (Mark In to Mark Out). You cannot make the clip “loop” by specifying
a longer duration.
When opening Playlist files in a text editor, you may have to change the file type to “All Files”
to be able to see files with the .lst extension.
MAXX-2400HD Owner’s Manual
Page 131
Download from Www.Somanuals.com. All Manuals Search And Download.
Some text editors, such as Notepad, do not display each line separately. Word and Wordpad
perform correctly because they accept files that have only Line Feeds (LF) at the ends of lines.
The server will accept modified or externally created files with only LF or with both LF and
Carriage Return (CR) at line endings. Do not use only CR without LF.
A list can be edited by:
•
Changing the name of a clip: Clip names are case sensitive. Any clip name that does not
match an existing clip will be reported as MISSING when the list is loaded on the server.
This also applies to the name of a subfolder.
•
•
Adding or deleting an event manually: Any of the available event types can be created.
Modifying or adding to existing events: “, SKIP” “, frames=xx” or GPI Outputs can be
added.
•
Cutting and pasting the contents of one list into another, or duplicating sections of a list.
Save the file as a raw text file, and replace the .txt extension with .lst. File names should be
limited to 31 characters.
When transferring .lst files via FTP, always specify Binary mode. Do not use ASCII or Auto.
Page 132
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E
As-Run Logging Detail
To enable As-Run logs, open a Playlist window, select Options, and then click on As-Run
Logs. When enabled, a check mark will appear next to the As-Run log label, and files played by a
playlist will be written to an As-Run log. Clips played in a transport window do not get written to
an as-run log.
As-Run logs are available only through FTP downloads; they cannot be viewed or printed from
the server itself. After logging into the server, select the ASRUN folder. All logs are stored in this
location, and have the extension “.arl”.
As-Run Naming Convention
The Naming convention for as-Run logs is as follows:
mmdd.c_xxxx.n.arl
mm
dd
c
month ( 01 through 12 )
Day ( 01 through 31 )
Channel ( 1 through 3 )
Name of Playlist
xxxx
n
arl
Instance Count
file extension
Sample As-Run Log
IS-76152 as-run (Ch2:KQRS) Engr Wed Feb 02, 2009 [Wednesday PM]
Pg 1
1 10:54:40 00:00:05:00 KRBE ID - Legal
PLAYED OK
2 10:54:45 00:00:30:00 Cellular One – Talk Time
3 10:55:15 00:00:30:00 Burger Stop – 2 for 1
4 10:55:45 00:00:15:00 Promo – Friends - Today
5 10:56:00 00:00:30:00 Bank of America – Gold Years
6 10:56:30 00:07:18:05 RICKI WEDNESDAY – SEG 1
PLAYED OK
PLAYED OK
PLAYED OK
PLAYED OK
PLAYED OK
Periodically, old logs should be deleted using the Delete command on your FTP client
software.
MAXX-2400HD Owner’s Manual
Page 133
Download from Www.Somanuals.com. All Manuals Search And Download.
As-Run Log Page Header
This section describes the format of the first line (page header):
IS-76152 as-run (Ch2:KQRS) Engr Wed Feb 02, 2009 [Wednesday PM]
Pg 1
IS-76152: IS-XXXXX, where XXXXX is the unique machine ID as shown in Help>About>Unit ID.
as-run (Ch2:KQRS): ChX is the channel number and KQRS is the name of the specific channel, as
defined in the Configuration System window.
Engr: The name of the server, as defined in the Configuration System window.
Wed Mar 30, 2009: The base date to which clip times are referenced.
[Wednesday PM]: The name of the playlist
Pg 1: The page number of the printout.
As-Run Log Body
This section describes the format of the body of an As-Run log:
2 10:54:45 00:00:30:00 Cellular One – Talk Time
PLAYED OK
2: The line number (order) of the clip as it appears in the playlist. The same clip could have
multiple numbers as files are added or deleted.
10:54:45 The time at which the clip was played in HH:MM:SS, on a 24-hour clock.
00:00:30:00 The length of the clip in HH:MM:SS.FF, on a 24-hour clock.
Cellular One – Talk Time: The name of the clip.
PLAYED OK: The status of the played clip.
Other possible status conditions are:
CLIPPED - Less than the full length played.
SKIPPED – The clip was skipped over because it was deselected (unchecked) or playback was
order was modified by CUE or JUMP
STOPPED – The clip was stopped during playout.
Page 134
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix F
Mechanical Drawing
Figure 32: Dimensional Drawing
MAXX-2400HD Owner’s Manual
Page 135
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
360 Systems
Review Clip..................................................50
Review Out Point .........................................50
Rew..............................................................47
Cascade Windows ............................................31
Channel Ganging..............................................72
Channel View
Playlist..........................................................35
Transport ......................................................33
Clip Navigator...................................................57
Clips
Deleting .......................................................57
Filtering display ............................................57
Locating........................................................58
Renaming .....................................................57
Sorting..........................................................57
Configuring the Network ..................................54
Connector Pinout
Audio XLR-3...............................................119
GPI.............................................................120
Serial Control..............................................119
SVGA .........................................................122
Connectors
Customer Service........................................114
E-mail .........................................................114
Fax..............................................................114
Telephone...................................................114
Website ......................................................114
3D Playback......................................................72
About RAID 6....................................................93
Address, 360 Systems......................................114
AES/EBU..........................................................119
Animation Import..............................................73
Appending a Playlist..........................................67
Applications......................................................16
Arming the Audio tracks....................................40
As-Run
Enabling........................................................66
As-Run logs .....................................................134
As-Run Logs ......................................................78
.arl files.........................................................78
Assigned Serial Ports .........................................87
Assigning Names to the Server and Transport
Channels.......................................................51
Audio
BNC ...........................................................120
Specifications .............................................119
Control Ports
Embedded.....................................................71
Audio Delay Time
Setting...........................................................40
Audio Input Source
Priority..........................................................84
Serial ......................................................28, 83
Crash Recording................................................43
CUE..................................................................65
Cue Shows 1st Frame........................................86
Cue with Offset (vs. Timestamp) .......................86
Customer Service............................................114
CXP Module
connections..................................................27
Mounting......................................................22
Date and Time ..................................................56
Deleting Clips...................................................57
Disk Array
Managing .....................................................94
Repair...........................................................94
Dolby-E.............................................................41
Drawing
Mechanical.................................................136
Drives
Setting...........................................................40
Audio Rate Conversion .....................................41
Audio Sample Rate Conversion.........................71
Audio Sync Reference .......................................41
Auto E-E Mode ............................................44, 87
Automation Control...........................................83
Automation Protocol .........................................84
Available Models ..............................................17
AXP Analog Audio Modules............................105
AXP Module
Mounting......................................................22
AXP Technical Specifications ..........................106
Bit-for-Bit®.........................................................41
Button
|<, >| ........................................................47
|<–>| ........................................................50
–>|..............................................................50
E-E ................................................................44
FF .................................................................47
GoTo ............................................................47
Jog - ..............................................................47
Jog +............................................................47
Mark In Point................................................49
Mark Out Point.............................................50
LED ............................................................107
Duration Display ..............................................50
DXP-2 Digital Audio Module..........................104
DXP-2 Technical Specifications.......................105
Edit Menu .........................................................31
Editing
Clip ..............................................................49
Page 136
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
While Recording...........................................49
E-E Mode...........................................................44
Eject..................................................................47
Embedded Audio ..............................................71
Ethernet Cable...................................................75
Ethernet Ports
JPEG-200 File Format........................................77
Key Features .....................................................15
Keyboard ..................................................25, 122
Keyboard Connection .......................................23
Keyboard Shortcuts .........................................130
KVM Switch......................................................23
LED Indicators.................................................107
Loop .................................................................46
LTC Time Code
Input.............................................................25
Output..........................................................25
Main Menu .......................................................30
Maintenance...................................................107
Maintenance Spares..........................................17
Making a Recording..........................................39
Mark In Point Button.........................................49
Mark Out Point Button......................................50
Mechanical Concerns .....................................109
Mechanical Drawing.......................................136
Menu
Main.............................................................30
Window .......................................................31
Monitor.............................................................25
Connection...................................................23
Requirements .........................................23, 25
Mouse.......................................................25, 122
Mouse Connection............................................23
mov files...........................................................73
Multi-Channel.................................................104
Network
Cable............................................................75
DHCP...........................................................55
Disabling......................................................54
saving Configuration.....................................55
Transfer Marked Segment .............................77
Transfer Rate.................................................76
Network Time Protocol.....................................79
NTP ..................................................................79
Odetics
Gigabit..........................................................25
EULA...............................................................117
Fans LED.........................................................107
Fast Forward / Rewind Buttons..........................47
Fault Diagnostics.............................................107
LEDs ...........................................................107
File Menu..........................................................35
in Transport View .........................................33
File Types Supported.........................................77
Filtering the Clip Display...................................57
Finding Clips.....................................................58
Using Regular Expressions ............................59
Using Wildcards ...........................................58
Firmware Updates from USB Memory.............112
Front Panel
Removing ...................................................108
Front Panel Indicators......................................107
FTP File Transfer................................................75
Genlock
LED.............................................................107
Signal Quality ...............................................37
Sync Reference .......................................25, 37
GoTo Buttons....................................................47
GPI Control.......................................................28
GPO..................................................................68
Graphics and Animation ...................................73
Halt.............................................................29, 95
Handling Precautions......................................109
Hard Drives
Installation ....................................................23
Replacement...............................................114
Replacing....................................................102
Ignore Preroll Commands..................................87
Image Server
Models..........................................................17
Video In........................................................25
Video Out.....................................................25
In Point Display.................................................49
Initial System Configuration ..............................37
Inputs
Video............................................................25
Installation ........................................................18
Installing/Removing
Serial Control................................................83
Odetics® Protocol ...........................................126
On-Screen
Main Menu...................................................30
Operations........................................................29
Options Menu
Playlist View.................................................36
Transport View .............................................34
Out Point Display .............................................50
Outputs
I/O Cards ....................................................109
Introduction ......................................................12
Jog Buttons........................................................47
JPEG 2000 (.jpv)
Video............................................................25
P2
Command Table.........................................125
Serial Control................................................83
Pause ................................................................46
JPEG-200 File Format....................................77
MAXX-2400HD Owner’s Manual
Page 137
Download from Www.Somanuals.com. All Manuals Search And Download.
Pinout
GPIO ..........................................................121
Schematic
GPIO..........................................................121
Playing A Clip ...................................................46
Playlist ........................................................35, 78
.lst files .........................................................78
Append.........................................................67
Creating........................................................63
Editing ..........................................................66
Editing Clip Duration ....................................67
Hold .............................................................67
Home ...........................................................65
Jumping ........................................................65
Loading.........................................................64
Looping ........................................................65
Management...............................................131
Mapping GPO ..............................................68
Pausing.........................................................65
Saving...........................................................64
Stopping .......................................................65
Playlist Menu Bar ..............................................35
Power Conditioning ..........................................19
Power Connector ..............................................26
Power LED......................................................107
Program Updates from USB Memory ..............111
Programming GPIO Inputs ................................53
Programming GPIO Outputs .............................52
Protocol ............................................................84
Quick Restart ....................................................29
Rack Mounting..................................................22
Radio Interference Compliance .......................115
RAID
SDI .............................................................15, 25
Serial Control Ports ...........................................28
Serial Port .........................................................26
Serial Protocol
Command Table.........................................123
P2...............................................................125
VDCP .........................................................123
Service
Access ........................................................108
Front Panel .................................................108
Top Cover ..................................................108
Settings - RAID Controller...............................103
Show First Frame ..............................................65
Show Menu ......................................................31
Shutdown ...................................................29, 95
Shuttle ..............................................................47
Slider Bar..........................................................47
Slow Motion .....................................................47
Software License Agreement ...........................117
Software Version.....................................110, 111
Sorting Clips .....................................................57
Specifications
Connectors .................................................119
Technical....................................................129
Status Bar..........................................................32
Still Frames .......................................................74
Storage Capacity ...............................................12
SVGA Connector Pinout .................................122
Symbols
Controller Settings.......................................103
Fault Tolerance .............................................93
Performance .................................................93
Repair...........................................................94
Rear Panel
Warning And Information.............................10
Sync Reference
Genlock..................................................25, 37
Sync Source
Setting ..........................................................37
System Board Ports .........................................122
System Configuration Options ..........................37
System Cooling.................................................19
System LED.....................................................107
System Menu Bar..............................................31
System Timing ..................................................70
Take Control .....................................................34
TARGA (.tga) files .............................................78
TARGA File Import ...........................................73
Tested Remote Control Panels, Switchers..........88
Tile Windows ...................................................31
Time Code
LTC...............................................................25
Time Code Source
Setting ..........................................................42
Top Cover
Removing...................................................108
Transfer Rate
Indicators....................................................108
Rear Panel Connections ....................................24
Reboot ..............................................................29
Recommended UPS Models..............................20
Record Configuration Options...........................39
Recording....................................................39, 42
Regular Expressions...........................................59
REGULATORY COMPLIANCE ........................115
Remote Workstation Interface ...........................89
Renaming Clips.................................................57
Repair .............................................................114
Replacing A Hard Drive ..................................114
Report Play (vs Still) At End ...............................86
Restart...............................................................29
Review Clip Button ...........................................50
Review Out Point Button...................................50
RFI/EMI interference..........................................20
Sample Rate Conversion....................................71
Page 138
MAXX-2400HD Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Ethernet ........................................................76
Transport...........................................................33
Transport Menu Bar...........................................33
Trouble Shooting.............................................107
Updating Firmware .........................................112
UPS power conditioning ...................................19
USB...................................................................26
Firmware Updates.......................................112
Program Updates ........................................111
VANC Line Selections .......................................42
Vari-Play 0 Equals Pause ...................................86
Vari-Play 1X Equals Play....................................86
VDCP
Serial Control................................................83
Setting source directory ................................85
VDCP Options..................................................86
Video Bit Rate...................................................39
Video Format Selection.....................................38
Video Inputs .....................................................25
Video Outputs ..................................................25
Video Sync Source Setting ................................37
Warranty.........................................................116
Windows Menu
Cascade........................................................31
Tile...............................................................31
Wiring
Command Table .........................................123
Controllers....................................................88
GPIO Schematic.........................................121
MAXX-2400HD Owner’s Manual
Page 139
Download from Www.Somanuals.com. All Manuals Search And Download.
|