Maxtor DVR 4Channel Stand alone DVMR User Manual

VER1.1

4Channel Stand-alone DVMR

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

CHAP. 1 Features & Package Contents ----------------------------------------------------------------

1-1. Features

1-2. Package Contents

CHAP. 2 Function of Each Button

2-1. Front

----------------------------------------------------------------

2-2. Rear

CHAP. 3 Installation

3-1. Installation Configuration

3-2. Detailed Installation

1) Rack Mount

2) HDD(Hard Disk Drive)

3) Camera

4) Monitor

5) Power

6) VCR, Video Printer

7) Other External Device

8) Connector Pin Assignment

9) RS-232C ASCII-code

CHAP. 4 Operation

4-1. System Log-in

4-2. Factory Default

4-3. Display Configuration

4-4. Live View Setup

1) Full / Multiple View

2) Sequencing Cameras

3) PIP View

4) Freeze View

5) Zoom View

4-5. Record

4-6. Playback

4-7. Search

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

4-8. PTZ Camera Operation

4-9. Data Back-Up

----------------------------------------------------------------

CHAP. 5 Set Up

5-1. Entering the Menu

5-2. Display Setup

1) Screen Display

2) Monitor Setup

5-3. Configuration

1. HDD Management

2. TIME/DATE Setup

3. Camera Setup

4. Interval Setup

5. Alarm Setup

----------------------------------------------------------------

6. Buzzer Setup

7. Password Setup

8. System Information

5-4. Record Setup

1. Record Configuration

2. Schedule Setup

3. Holiday Setup

5-5. Back-Up

5-6. External Device

1. TCP/IP Setup

2. RS-232C Setup

3. Pan Tilt Zoom Setup

5-7. FACTORY Default

5-8. Language Setup

CHAP. 6 Network Setup

6-1. DVR Network Configuration

6-2. Remote Viewer Program

6-3. Back-Up CD Player

6-4. FAQ

----------------------------------------------------------------

CHAP. 7 Specifications

----------------------------------------------------------------

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 1 Features & Package Contents

1-1. Features

Live View

Real time display per camera

Auto Sequence

PIP (Picture in picture)

Digital Zoom

Display Freeze

Simple Playback mode

Simple PTZ camera control

Record

Variable Record resolution (For higher picture quality or higher recording speed)

Efficient Image Quality setup in 5 steps

Schedule Record / Holiday Record

Event Record (Alarm / Motion)

Emergency Record

Network

View Live and Playback images across IP network

Copy images across the network

Playback

Search & Playback by Date/Time, Event and Camera

Outstanding picture quality by JPEG 2000 compression algorithm (No mosaic effect)

Suitable for recording not only images but also text

Various steps in Forward Playback Speed (X1/4, X1/2, X2, X4, X16, X60)

Various steps in Backward Playback Speed (X1/4, X1/2, X2, X4, X16, X60)

Easy and convenient search by Jog Shuttle & Remote Controller

Data Back-Up

Simple Back-Up using built-in CD Writer (Back-up CD Player included in the package)

Network Back-Up using Remote Viewer program(Remote Viewer included in the package)

Supports bigger capacity of HDD (300GB or bigger)

Others

Multi-Language (English, Spanish, Portuguese, German, French, Italy, Japan, China)

VGA option board supports both TFT LCD monitor and CRT monitor

Lock the system by Password

JOG / SHUTTLE

PAL/NTSC Auto detection

Control the unit by using Remote Controller

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 1 Features & Package Contents

1-2. Package Contents

1. DVR Main Unit

2. Remote Controller

3. Power Cable

6. Software CD

4. Power Adapter

5. User’s Manual

7. Rubber Pad

8. HDD absorber

9. Battery for remote controller

Description

10. Bolts

Package Contents

1. DVR Main Unit

2. Remote Controller

3. Power Cable

4. Power Adapter

5. User’s Manual

6. Software CD

7. Rubber Pad

STAND-ALONE DIGITAL VIDEO RECORDER

DVR control

AC power supply to adapters for 12 V DC power

12 V DC power supply

User’s Manual

Remote Viewer Software & Back up CD player

Prevent DVR from slipping. Attach it to the bottom of main unit

Absorbing the mechanical shock of HDD against the case bottom

Battery for remote controller

8. HDD absorber

9. Battery

10. Rack mount

bracket / Bolts

Rack mount bracket

For fixing Rack Mount bracket to DVR (6ea)

For fixing DVR with Rack Mount bracket to 19” Rack (4ea)

For fixing Hard Disk Drive into DVR (8ea)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 2 Function of Each Button

2-1 FRONT

Name

Function

① LED Lamps

② USB Device

③ IR

Shows status of operation

Firmware upgrade by connecting PC with latest firmware to USB port

IR receiver

④ Camera

selection

1. Pressing this button will display a full screen image of that camera

2. Control PTZ camera (Each button is assigned for each PTZ command)

• ON : LIGHT ON

• SET : SET PRESET

• CLEAR : CLEAR PRESET

• GOTO : GOTO PRESET

• AUTO : AUTO SCAN

• F1 : USER 1

PTZ camera

control

• OFF : LIGHT OFF

• OPEN : IRIS OPEN

• CLOSE: IRIS CLOSE

• NEAR : FOCUS NEAR

• FAR : FOCUS FAR

• WIDE : ZOOM IN

• F2 : USER 2

• F3 : USER 3

• TELE : ZOOM OUT

• F4 : USER 4

⑤ Record /

REC

STOP

PLAY

Emergency Record at continuous, 60ips, SUPER FINE size

Playback

Stop of Emergency Record and return to Schedule Record

from Emergency Record. Playback stop.

Playback of recorded data on HDD

SEARCH Search recorded data on HDD

⑥ SETUP

ENTER

▲▼◀▶

+ -

Set up for SYSTEM MENU or Use to exit the menu

Selects each menu option

Move to next step

Navigate in the menu

Reduce or increase the option value in the menu

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 2 Function of Each Button

Name

Function

⑦ LIVE View

PTZ

On/Off for PAN/TILT/ZOOM control mode

Control

Press this button first to control PTZ camera connected to

DVR unit via RS-485

ZOOM

FRZ

Zooming an image

Freezing an image

Switch to split display

MODE

MODE button changes screen-division from (to) full screen

to (from) 16-split screen.

PIP

SEQ

Display in PIP (Picture in Picture) mode

Auto camera image sequencing in full screen mode

Lock the key function.

K.LOCK

To unlock, press longer time (for several seconds) and then

input the password.

Q. Play

Press Q. Play button while you see live display, and

playback starts from the end of data in reverse direction.

(Quick Play)

⑧ Jog Shuttle

J/SHUTTLE

Pressing Jog Shuttle button (Ready for use Jog/Shuttle)

: In playback mode, pressing J. SHUTTLE button make

images frozen.

Control

RUN LED on : While you operate Jog or Shuttle

ACTIVE LED on : When J. SHUTTLE button is pressed

⑨ Jog Shuttle

Very easy and convenient search : Press J. Shuttle button, and images in

playback pause, and then Jog and Shuttle makes it very easy and convenient

to search, forward or backward, fast and slow, as user want.

⑩ CD-RW

Data Back-up and Firmware Upgrade using built-in CD writer

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 2 Function of Each Button

2-2. REAR

Name

Function

RS 485

Connection with PTZ Camera or other external device using RS 485

interface

RELAY Output

SENSOR Input

Relay out terminal

Sensor input terminal

VGA

Connection to VGA Monitor (CRT type or TFT LCD monitor)

Just in case you purchased DVR with VGA option board fixed on the main

board of DVR, you can connect VGA Monitor to DVR unit.

ETHERNET

RS-232C

Connection to ETHERNET device

Connection to external device as PC using RS-232C to control the DVR

Connection with camera

CAMERA Input

LOOP Output

Camera loop out

Connection with Composite Monitor

MONITOR

Output

VCR Output

DC Power

Connection with VCR for analog backup

DC 12V 5A Adaptor (Refer to the Instruction for adapter by HDDs capacity)

Power ON/OFF switch for adapters

POWER

SWITCH

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 3 Installation

CHAP.3 Installation

3-1. Installation Configuration

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 3 Installation

3-2. Detailed Installation

1) Rack mount

Remove 4 bolts on each side cap to

install rack mount.

Attach rack mount bracket to DVR.

Attach DVR with rack mount bracket to 19” rack.

2) HDD

1. Connect Main Board and HDD1 using IDE cable and HDD power cable.

2. The jumper setting of HDD1 should be on Master if you install only one HDD.

3. The jumper setting of HDD1 should be on Master and HDD2 should be on Slave if you install

two HDDs.(Refer to the above figure)

4. Stick the HDD absorber (included in package) on the bottom of case and then install the HDD

on top of them by using the bolts (included in package).

5. Screws must be inserted from outside of the case bottom.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 3 Installation

3) Camera

Connect cameras to the camera input on rear panel of DVR marked CAMERA IN.

4) Monitor

Connect the video output marked MONITOR to Video-In of Main monitor.

5) Power

Some bigger capacity of Maxtor HDDs

need more power than others,

So, You may need to connect 2 adapters, one to MAIN jack and the other to SUB jack.

If you install 2 IBM Hitachi HDDs with any capacity, just connect one adapter to MAIN jack.

For details, refer to Adapter Instruction included in the package.

For right operation, Maxtor and IBM Hitachi HDD are recommended.

Before you turn on the Power switch, be sure all necessary devices such as Power

adaptor, cameras and Monitor are connected properly to DVR!

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 3 Installation

6) VCR, VIDEO PRINTER

Connect VCR or VIDEO Printer to VCR out on the rear panel of DVR.

7) Other External Device

RS-232C : Control DVR through RS-232C port by using PC.

RS-485 : Control external device like PTZ Camera

RELAY Output : Relay Output

SENSOR Input : SENSOR Input (Alarm connection)

ETHERNET : Connection to LAN, WAN, Internet.

VGA : Connection to a VGA monitor(CRT,TFT LCD) if optional VGA board is fixed

on the main board as shown in the following figure.

Resolution set by manufacturer is 800x600 60 Hz, and user can set resolution

in MONITOR SETUP / VGA SETUP / VGA RESOLUTION.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 3 Installation

8) Connector Pin Assignment

Description

DCD

RxD

TxD

Data Carrier Detect

Receive data

DSR

RTS

CTS

Data Set Ready

RS232C: Rx/Tx data

Transmit data

DTR

GND

Data Terminal data

Signal Ground

9) RS-232C ASCII-code

Following ASCII-Codes(Hexa-Code) are for programmers who want to control DVR unit

via the RS232C Port using keyboard of PC.

(The following table is based on 16ch DVR.)

All ASCII-Code is 1 Byte.

REC

STOP

PLAY

‘R’

‘S’

‘P’

DOWN

LEFT

‘J’

‘H’

‘K’

PTZ

ZOOM

FRZ

‘T’

‘Z’

‘F’

KLOCK

QPLAY

CH1

‘C’

‘Y’

‘1’

CH6

CH7

CH8

‘6’

‘7’

‘8’

CH13

CH14

CH15

’#’

’$’

RIGHT

’%’

Pause

SERCH

‘A’

‘E’

‘M’

‘U’

‘N’

0x0d

‘<‘

MODE

PIP

‘D’

‘I’

CH2

CH3

CH4

CH5

‘2’

‘3’

‘4’

‘5’

CH9

CH10

CH11

CH12

‘9’

’0’

CH16

’^’

ENTER

SEQ

‘Q’

‘L’

’!’

‘>’

J.SHU

’@’

Jog / Shuttle

Please input ‘L’ command to activate J/SHUTTLE function using keyboard of PC.

Shuttle Right 10 degree

Shuttle Right 20 degree

Shuttle Right 30 degree

Shuttle Right 40 degree

Shuttle Right 50 degree

Shuttle Right 60 degree

Shuttle Right 70 degree

"&<1"[enter]

"&<2"[enter]

"&<3"[enter]

"&<4"[enter]

"&<5"[enter]

"&<6"[enter]

"&<7"[enter]

Shuttle Left 10 degree

Shuttle Left 20 degree

Shuttle Left 30 degree

Shuttle Left 40 degree

Shuttle Left 50 degree

Shuttle Left 60 degree

Shuttle Left 70 degree

Shuttle Left 80 degree

Jog Plus

"&>1"[enter]

"&>2"[enter]

"&>3"[enter]

"&>4"[enter]

"&>5"[enter]

"&>6"[enter]

"&>7"[enter]

"&>8"[enter]

"&+"[enter]

Jog Minus

"&-"[enter]

Shuttle : After inputting a command once, it will keep performing the command until next

command.

Jog : It makes the stage staying after one time operation by command input like Button

operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 4 Operation

4-1. System Log-In

DVR LOG-IN

1) To enter into the setup menu, press the [MENU] button.

2) Enter password with channel number button

from No.1 to No.10 on the front of the DVR unit.

(Maximum of 8 digits are available)

ENTER PASSWORD : _ _ _ _ _ _ _ _

INPUT YOUR OWN PASSWORD

TO EXIT, PRESS [MENU]

3) After inputting the password, press the [ENTER] button.

Administrator :

If the password entered matches previously set password, “ LOGIN ADMIN” message appears and

you can enter into SYSTEM SETUP.

If the password entered does not match previously set password, the DVR unit goes back to live

display mode.

Factory default password is blank. For log-in, just press [MENU] button and then [ENTER] button.

-Factory default password

ADMIN : (Blank)

MANAGER : ‘ 1 ’

USER 1~USER8 : ‘ 2 ’ ~ ’ 9 ’

※ We recommend configuring a unique password as per the procedure in

SYSTEM MENU - CONFIGURATION - PASSWORD SETUP.

※ For security reasons, be sure to make note of your own password.

4-2. Factory Default

Before first operation, you must set Time/Date, set FACTORY DEFAULT, and then clear

HDD, even though it is brand new one. It is to make DVMR system and HDD ready for

proper operation. Starting recording without FACTORY DEFAULT setting and HDD clear will

cause malfunction.

1. HDD CLEAR

2. FACTORY DEFAULT

HDD MANAGEMENT

DISPLAY SETUP

CONFIGURATION

REOCRD SETUP

BACK-UP

EXTERNAL DEVICE

FACTORY DEFAULT

LANGUAGE

TIME/DATE SETUP

CAMERA SETUP

CONFIGURATION

REOCRD SETUP

BACK-UP

EXTERNAL DEVICE

FACTORY DEFAULT

LANGUAGE

INTERVAL SETUP

ALARM SETUP

BUZZER SETUP

PASSWORD SETUP

SYSTEM IMFORMATION

Refer to page 22.

Refer to page 31.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP 4. Operation

4-3. Display Configuration

HDD Status

ETHERNET status

In live mode : Amount of data recorded

In Playback mode : Amount of data played

Connected

Disconnected

1. Current Time & Date

3. Status of DVR system

Emergency Record (Red)

Schedule Record (Green)

Record Stop (White)

Stop

PIP

FREEZE

Forward Playback

Backward Playback

Pause

1/4~1/2x forward playback

1/4~1/2x backward playback

2~16x forward playback

2~16x backward playback

16~64x forward playback

16~64x backward playback

SEQUENCE

ZOOM

ALARM Record

MOTION Record

BASIC

CONTINUOUS Record

NORMAL

ENHANCED

FINE

LIVE Display

120(100) IPS @ 720x240(720x288)

240(200) IPS @360x240(360x288)

480(400) IPS @360x120(360x144)

2. Camera Title

SUPER FINE

4-4. Live View Setup

1) Full / Multiple View

Switch to multi-screen display by pressing [MODE]. For full image display, just press the channel button

which you want or [MODE] button again.

Full screen

Multi -Screen

[MODE]

[MODE] or Channel button

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 4 Operation

2) View in Sequence

Press [SEQ] button. It automatically displays full screen images in sequence.

CH04

●

CH03

●

CH02

CH01

3) Picture in Picture(PIP View)

When it is in full screen display mode, you can see other camera in a small

window by pressing [PIP].The other camera in small window is rotating in

sequence to next number of camera and you can set the rotating time

interval as per the procedure in SYSTEM MENU-CONFIGURATION-

INTERVAL SETUP.

CAM-01

4) Freeze View

Full display mode : If you press the [FRZ] button, the FRZ icon will be activated on the

screen and “F” character will be shown beside camera title, and

live image will be frozen.

Split display mode : If you press the [FRZ] button, the FRZ icon will be activated on the

screen. press the channel button which you want to freeze.

To release frozen image, press channel number of frozen image again

and press [FRZ] button to exit FRZ mode.

5) Zoom View

In full screen, press the [ZOOM] button and move the Selection Frame using J.SHUTTLE or Direction

keys to the area which you want to enlarge. And then press the [ENTER] button for 2-times enlarged

picture. To exit Zoom mode, just press [ZOOM] button again.

Horizontal Movement : J.SHUTTLE

Vertical Movement : Hold [UP or DOWN] button and turn J/SHUTTLE

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 4 Operation

4-5. Record

Recording mode set before delivery by manufacturer (Default recording mode) is Schedule Recording.

In this default recording mode, it records 24 hours/day continuously in weekday and on the weekend.

Once you press the [REC] button while you see live view, the record type is changed to Emergency Record mode.

- Emergency Record : at full resolution/in best quality

Record type : CONTINUOUS, SUPER FINE quality,

Emergency Record [RED]

60 (50) ips at 720X240 (720x288)

- Schedule Record

Schedule Record [GREEN]

Record and stop as set (time interval and

record type) in RECORD-SCHEDULE SETUP menu.

Stop Record [WHITE]

- Stop Record

Recording stopped as set in

RECORD-SCHEDULE SETUP menu.

On the screen

- Emergency Record

: Red Record Icon (

- Schedule Record

: Green Record Icon (

- Record Stop

) and Record LED is lit

: White Icon (

) and Record LED is off

- Motion Record, Alarm Record, Alarm+Motion Record

: Record standby LED blinks

: Record LED is lit

※ While in Emergency Record mode, press [STOP],

[PLAY], [MENU], or [SEARCH] button to exit from

Emergency Recording mode and return to Schedule

Record mode.

※ For details, refer to the SYSTEM MENU – RECORD

SETUP (Page 27)

- This DVR unit does not record in following conditions ;

※ While entered in the Menu.

※ No camera is connected

※ Overwriting is off in the Record Setup menu.

4-6. Playback

On record mode or stop mode, press [PLAY] button to play the recorded data in 1x speed.

For backward playback, press [PLAY] button again.

Use Jog/Shuttle to pause and control playback speed. To stop playback, press the [STOP] button.

Using Jog/Shuttle

press the [J.SHUTTLE] button in playback mode. The [ACTIVE] LED will be lit, and Jog/Shuttle is ready

for use. The [RUN] LED will blink whenever you operate the Jog/Shuttle.

For forward playback, turn the Shuttle right and turn Shuttle left for backward playback.

Turn Jog using your index figure to see picture by picture in forward or backward direction.

Operation of Shuttle is as follows.

1/4 x : 4 times slower than normal playback speed

1/2 x : 2 times slower than normal playback speed

1 x : Normal playback speed

2 x : 2 times faster than normal playback speed

4 x : 4 times faster than normal playback speed

16 x : 16 times faster than normal playback speed

64 x : 64 times faster than normal playback speed

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 4 Operation

If you want to keep the playback speed you selected using Shuttle, just hold the shuttle at that location for a few

seconds, and playback in speed you selected continues until you rotate Shuttle again.

4-7. Search

Press [SEARCH] button, and 3 different methods for searching recorded data are available as shown

in following SEARCH window. For selecting searching method, use direction key or Jog/Shuttle.

After selecting each search method, press [ENTER] button for playback. exit, press [MENU] button.

1) SEARCH BAR

Search by percentage of total recorded data. It starts from image corresponding to set % of data

on the search bar.

2) TIME/DATE

Search by time & date. Playback starts from the time & date selected.

3) EVENT LIST

Search by event list (Motion, Alarm, Video Loss).

RECORD SEARCH BAR

SEARCH BAR

[TARGET PERCENT]

TIME/DATE

EVENT LIST

020 %

SELECT MENU : ▲▼, & [ENTER]

SEARCH : [ENTER], EXIT : [MENU]

SEARCH page

SEARCH BAR page

TIME/DATE

EVENT LIST

EVENT

TIME/DATE

001/000

----

---- / - -/ --

-- : -- : --

[START] 2005/JUN/20 AM04:04:12

[ END ] 2005/JUN/20 PM08:12:23

INPUT TIME/DATE

2005/JUN/07 AM04:04:12

SEARCH : [ENTER], EXIT : [MENU]

SEARCH : [ENTER] , EXIT : [MENU]

TIME/DATE page

EVENT LIST page

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 4 Operation

4-8. PAN/TILT/ZOOM Camera Operation

Press [PTZ] button first for PTZ control mode. Numeric buttons from 1 to 16 and direction buttons are

assigned for each PTZ command, and user can control PTZ camera connected to DVR unit by

pressing any one of those 20 buttons, one after the other, as needed, and it is just like control by

separate PTZ controller.

Button

PTZ command

LIGHT ON

Button

PTZ command

PRESET CLEAR

PRESET GOTO

PRESET AUTO

FUNCTION

1/ON

10/CLEAR

2/OFF

LIGHT OFF

IRIS OPEN

IRIS CLOSE

FOCUS NEAR

FOCUS FAR

ZOOM IN

11/GOTO

3/OPEN

4/CLOSE

5/NEAR

6/FAR

12/AUTO

13/F1 ~ 16/F4

UP BUTTON

DOWN BUTTON

LEFT BUTTON

RIGHT BUTTON

TILT UP

TILT DOWN

PAN LEFT

7/WIDE

8/TELE

9/SET

ZOOM OUT

PRESET SET

PAN RIGHT

4-9. Data Back-Up

Enter into SYSTEM MENU-BACKUP-CDR SETUP.

1) Insert empty CD-R media into CD writer and select the start time & date from which you want to back up.

※ The START & END time / date in HDD sub-menu only shows start and end of recording.

This is not selectable and editable.

※ 700MB on CD-R sub-menu represent size of CD-R media inserted.

2) To set start time of back-up and back-up data size, press the [ENTER] button first on [START] or [SIZE]

sub-menu and adjust using [+] or [-] button and move using [LEFT] and [RIGHT] button for next

change. After setting the time & date and back-up data size, press the [ENTER] button again to exit.

※ End of back-up time will be calculated automatically as per start time & date and the back-up

data size you set.

※ User can select the back-up data size (size of back-up data from start of back-up) on [SIZE] item but

END of back-up time is automatically determined by DVR system.

3) Press [ENTER] button on BURN sub-menu. DVR system starts burning CD.

4) When burning is completed, CD-R media will come out automatically. In the next CD back-up, start

time of CD-R shall be the end time of previous CD-back-up, and you can back-up from that for

continuous data back-up. If you need another backup, repeat the above procedure. To stop backup,

press the [MENU] button.

※ During burning CD, it’s impossible to cancel burning process.

5) User can verify the back-up CD on PC with BACK-UP CD PLAYER (Included in Package).

CD-R SETUP

HDD

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

CD-R

700 MB

CD-R

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[ SIZE ] 700 MB - > 700MB

[ SIZE ]

000MB

BURN

CD-RW BURNING : IMAGE DATA.

EXIT : [MENU]

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

5-1. Entering into the Menu

Enter into SYSTEM MENU by pressing [MENU] button.

Button

Function

Enter into SYSTEM MENU, Move to previous menu, ESC

ENTER

Selection key, Move to sub-menu, change status (ON or OFF)

Move to next page

Move to upper side

DOWN

LEFT

Move down side

Move to the left

RIGHT

MINUS [-]

PLUS [+]

Jog Shuttle

Move to the right

Decrease the option value

Increase the option value

Jog left turning : Move backward to next image / Decrease value

Jog right turning : Move forward to next image / Increase value

Shuttle left turning : Decrease playback speed / Decrease value

Shuttle right turning : Increase playback speed / Increase value

SYSTEM MENU

RECORD CONFIGURATION

SCREEN DISPLAY

MONITOR SETUP

SCHEDULE SETUP

HOLIDAY SETUP

DISPLAY SETUP

CONFIGURATION

RECORD SETUP

BACK-UP

HDD MANAGEMENT

TIME/DATE SETUP

CAMERA SETUP

EXTERNAL DEVICE

INTERVAL SETUP

ALARM SETUP

BUZZER SETUP

PASSWORD SETUP

SYSTEM INFORMATION

FACTORY DEFAULT

LANGUAGE

TCP/IP SETUP

RS-232C SETUP

PAN/TILT SETUP

ENGLISH

SELECT MENU : ▲▼, & [ENTER]

SYSTEM MENU

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

5-2. DISPLAY SETUP

Setting up parameters for monitor and display on screen.

Enter into SYSTEM MENU-DIPLAY SETUP.

DISPLAY SETUP

LIVE

PLAYBACK

SCREEN DISPLAY

MONITOR SETUP

VGA SETUP

COLOR BAR TEST

SELECT MENU : ▲▼, & [ENTER]

1) SCREEN DISPLAY

Setting up the screen display in LIVE mode

and PLAYBACK mode.

Select the sub-menu which you would like to set using

direction buttons and then change ON/OFF with

[ENTER] button.

1. TIME/DATE : Display time & date

2. DVR STATUS : Display system setting status

3. ICON DISPLAY : Display function setting status

4. REC/PLAY BAR : Display record / playback status

5. CAMERA TITLE : Display camera title

2) MONITOR SETUP

VGA SETUP : VGA option card enables to connect TFT LCD monitor or CRT type PC monitor to

DVR unit. To connect TFT LCD monitor or CRT type PC monitor to DVR unit, select

resolution as follows using [+] or [−] button. After setting the below option, press

[ENTER] button then the DVR unit will set VGA resolution automatically.

VGA option card supports following resolution, and choose best resolution that

match TFT LCD monitor or CRT type PC monitor to be connected to DVR unit.

- 640X480 / 60Hz

- 800X600 / 60Hz

- 1024X768 / 60Hz

- 640X480 / 75Hz

- 800X600 / 75Hz

- 1024X768 / 75Hz

※ NOTICE : In the booting process,

DVR unit with VGA option

card takes some seconds

more to set parameters.

COLOR BAR TEST : Adjust color tone of monitor.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

5-3. CONFIGURATION

Various parameters for system can be set in CONFIGURATION menu.

Enter into SYSTEM MENU-CONFIGURATION and press the [ENTER] button.

CONFIGURATION

HDD SETUP

HDD MANAGEMENT

HDD INFORMATION

TIME/DATE SETUP

CAMERA SETUP

INTERVAL SETUP

ALARM SETUP

CAMERA TITLE

BUZZER SETUP

CAMERA SETTING

CAMERA ACTIVE SETUP

MOTION SETUP

PASSWORD SETUP

SYSTEM INFORMATION

SELECT MENU : ▲▼, & [ENTER]

1) HDD MANAGEMENT

Enter into SYSTEM MENU-CONFIGURATION-HDD MANAGEMENT and press the [ENTER] button.

(1) HDD SETUP

This page includes information about start and end of recording, location of recorded data, or location

of last playback on HDD. In addition, users can delete all the data on HDD.

HDD SETUP

On the [HDD CLEAR] sub-menu, press the [ENTER]

button to delete all image data on HDD.

STATUS

HDD

DATE/TIME

The system will ask password for verification.

After you clear all data on HDD, status of HDD CLEAR

changes from IN USE to EMPTY.

----------------------------------------------------------------------

BEGIN

RECORD MASTER

PLAY MASTER

MASTER

2005/04/08

12:12:05

2005/04/09

15:09:58

2005/04/08

19:44:31

※ When you clear HDD, event list is deleted, too.

ENTER PASSWORD : ________

INPUT YOUR OWN PASSWORD.

EMPTY

HDD STATUS

HDD CLEAR

NORMAL

IN USE

TO EXIT, PRESS [MENU]

HDD CLEAR [ENTER], EXIT [MENU]

If you selected OVERWRITE in Record Setup, the HDD STATUS presented as OVERWRITE.

HDD INFORMATION

(2) HDD INFORMATION

[MASTER]

MODEL

SPEED

SIZE

: Maxtor 6Y080L0

: PIO-4

: 76GB

This menu will show the physical information

of HDD in DVR.

START

END

: 2005/04/08 12:08:56

[SLAVE]

MODEL

SPEED

SIZE

: AT5520026DT

: 240/120nsec

: 80GB

START

END

: 2005/04/08 12:08:56

TO EXIT, PRESS [MENU]

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

2) TIME/DATE SETUP

TIME/DATE SETUP

Set time and date of DVR system which is very

important for search with time and date of the event.

Time and date set by manufacturer is different from

local time of user, and user must set time and date

exactly in the first operation. Set time & date using

direction buttons and [-][+] button or Jog shuttle

YEAR

MONTH

DAY

2005 / JUN /11

PM14:06:45

HOUR

MINUTE

SECOND

SELECT : ▲▼, CHANE VALUE : - +

3) CAMERA SETUP

CAMERA SETUP

CAMERA TITLE SETUP

CAMERA TITLE

CAMERA SETUP

CAMERA ACTIVE SETUP

MOTION SETUP

0123456789 .ABCDEFGHIJKLMNOPQ

RSTUVWXYZ ! #-[ ]*+ -,./ :<=>?@▶◀

CAMERA01

CAMERA02

CAMERA03

CAMERA04

CAM -1

CAM -2

CAM -3

CAM -4

[ENTER] SELECT MODE

[▲/▼] select CAMERA

SELECT MENU : ▲▼, & [ENTER]

(1) TITLE : Input Title of each camera. Move to channel you want to change using [LEFT] or [RIGHT]

direction button and then change the title using [-] [+] button. When modification is finished,

press the [ENTER] button. To exit to previous menu, press the [MENU] button.

(2) COLOR : Adjust image color

Move to each element using

CAMERA COLOR SETUP

[UP][DOWN] button and adjust using

[-] [+] button or Jog shuttle.

CHANNEL

BRIGHTNESS

CONTRAST

SATURATION

HUE

CHANNEL : Select camera

BRIGHTNESS : Adjust image brightness (-32~ 31)

CONTRAST : Adjust color contrast ( -32 ~ 31)

SATURATION : Adjust color saturation ( -32 ~ 31)

HUE : Adjust color hue ( -32 ~ 31)

SELECT : ▲▼, CHANE VALUE : + -

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

CAMERA ACTIVE SETUP

MOTION CONFIGURATION

CHANNEL

STATUS

LIVE

REC

---------------------------------------------------------------------------

SENSITIVITY GRADE

MOTION DISPLAY TYPE

RECORD DURATION

ACTIVE

LOSS

OFF

05 SEC

ACTIVE

SELECT ▲▼, CHANGE VALUE : + -

SELECT : ▲▼ ◀▶, & [ENTER]

(3) CAMERA ACTIVE SETUP : With direction button, move to option to be changed, and press [ENTER]

button to select [ON/OFF]. If it is set at LIVE [OFF] and REC [ON], DVR

system records, but does not show live image of set channel.

- STATUS : Shows if image from a specific channel is coming for live display and recording. In normal

camera condition, it is ACTIVE, but LOSS is displayed when the cable is disconnected or

camera is not working.

- LIVE : Decides whether to show LIVE screen image or not.

- REC : Decides whether to record relevant channel or not.

(4) MOTION SETUP: You can set sensitive of motion detection in 4 steps, detection window number, motion

detection area and others in relation to motion recording in this menu.

(4)-1. MOTION SETUP

- SENSITIVITY GRADE : Adjusts motion detection sensitivity. (LOW, MEDIUM, HIGH, VERY HIGH)

- MOTION DISPLAY TYPE : Showing cells with motion detected differently from cells with no motion .

- RECORD DURATION : Whenever motion is detected and it is set at Motion Recording mode, DVR

system records for RECORD DURATION from time motion is detected.

(1sec. ~ 99 sec.) (Default duration : 5 sec.)

(4)-2. MOTION MASK SETUP: Set motion detection area. Direction button is for moving and [ENTER]

button is for selection, and [MODE] button is for changing mode of MASK SETUP.

- CELL : Move to the location which you want to detect and then press the [ENTER] button.

Highlighted cell area means motion detection area.

- ALL ON : Set all cells as detection area. Use [ENTER] button to set.

- ALL OFF : Set all cells as no-detection area. Use [ENTER] button to set.

- BLOCK ON : Select detection area by block. Use [MODE] button and press [ENTER] button to set ON.

- BLOCK OFF : Select un-detection area by block. Use [MODE] button and press [ENTER] button to set ON.

Highlighted Area

(Motion Detection Area)

Non-highlighted Area

(No Motion Detection Area)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

INTERVAL SETUP

SWICHING INTERVAL

FULL SCREEN

4) INTERVAL SETUP

: 01 SEC

PIP SCREEN

Set the switching time interval for SEQ or PIP

function.(1 sec. ~ 99 sec.)

EVENT RECORD

EVENT UPDATE TIME

: 01 SEC

FULL SCREEN : set the sequencing switch time interval

in live full screen.

SELECT ▲▼◀▶, CHANGE VALUE : + -

PIP SCREEN : set the sequencing switch time interval

of PIP window.

EVENT UPDATE TIME : Set the minimum time interval of event to be listed in EVENT LIST.

If EVENT UPDATE TIME is set at 20 sec, only following event happened

20 sec or more than 20 sec later previous event shall be listed in EVENT LIST.

5) ALARM SETUP

Set type of alarm sensors connected to DVR unit.

N.O represents Normal Open type and N.C Normal Close type.

ALARM SETUP

CHANNEL

CH1

N.O

005

ALARM INPUT

DURATION

N.O ................................ NORMAL OPEN

N.C ................................ NORMAL CLOSE

....................................... DISABLE

SELECT : ▲▼, CHANGE VALUE : + -

1) ALARM INPUT : Select type of alarm sensor connected to DVR unit (N.O or N.C).

Use direction button and [-] [+] button to set.

DISABLE represents not to use alarm sensor connected to DVR.

2) DURATION : Set the duration of alarm when an ALARM is activated. (0 sec. ~ 300 sec.)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

6) BUZZER SETUP

BUZZER SETUP

Set parameters for buzzer (On or Off).

Use direction button and [ENTER] button.

ALL

KEY BEEP

KEY BEEP : buzz when button is pressed.

VIDEO LOSS

ALARM ACTIVE

MOTION DETECT

VIDEO LOSS : buzz when video signal is lost.

ALARM ACTIVE : buzz when alarm is activated.

MOTION DETECT : buzz when motion is detected.

User can set all buzzers at On/Off at once

by set ALL at ON/OFF.

SELECT : ▲▼, & [ENTER]

7) PASSWORD SETUP

Set user ID and password.

-Use [UP] and [DOWN] button to move to option

and [LEFT] and [RIGHT] button to set user ID.

PASSWORD SETUP

The password must be consist of 1 to 8 digit

number. Just use numbers button from 1 to 10

on the front panel of DVR unit.

USER I D

USER PW

NEW PW

CONFIRM

ADMIN

---------------------

-To change password, user must input current

password and then input new password.

And input again new password to confirm.

- Default value

ADMIN : ‘ ‘ (Blank)

MANAGER : ‘1’

USER 1 : ‘2”

[K1-K10] INPUT PASSWORD

[ENTER] CHANGE PASSWORD

TO EXIT, PRESS [MENU]

USER 8 : ‘9’

※ Change the user PASSWORD in the first operation is recommended.

※ In case you forgot PASSWORD, contact dealer of DVR to get instruction to enter into menu to

set new PASSWORD.

SYSTEM INFORMATION

8) SYSTEM INFORMATION

S/W VERSION VER 1.0

H/W VERSION VER 1.0

PRODUCT ID

01S-2039-001008-AR-01

MASTER

DVR system information including firmware

version, hardware version, product ID, etc….

Maxtor 6Y060L0

SLAVE

CD-R

SAMSUNG CD-R/RW SW-256B

TO EXIT, PRESS [MENU]

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

5-4. RECORD SETUP

This is the most important configuration of the DVR.

RECORD SETUP

Enter into SYSTEM MENU-RECORD SETUP

and press the [ENTER] button.

RECORD CONFIGURATION

SCHEDULE SETUP

HOLIDAY SETUP

1) RECORD CONFIGURATION

Use direction button to move and [-] [+] button to set value.

(1) OVERWRITE : Set overwrite or stop recording when

the HDD is full.

(2) MULTIPLEX

- DUPLEX : Playback & Ethernet

- TRIPLEX : Playback & Recording & Ethernet

※ Note: DUPLEX MODE is recommended to playback

the images at a maximum frame rate.

SELECT MENU : ▲▼, & [ENTER]

But, it makes DVR not to record during search.

RECORD CONFIGURATION

(3) QUALITY : Set recording picture quality.

Actually it is fixing maximum data size of

OVERWRITE

image for each picture quality in 5 steps

as follows.

MULTIPLEX

TRIPLEX

ENHANCED

60IPS 720*240

1/1X

QUALITY

- BASIC

- NORMAL

RESOLUTION

RECORD IN ALARM

RECORD IN MOTION

CONTINUOUS RECORD

- ENHANCED

- FINE

1/1X

- SUPER FINE: Default quality set by manufacturer

1/1X

In Emergency recording mode, recording quality is

SUPER FINE.

SELECT MENU : ▲▼, CHANGE VALUE : + -

To send more images via IP network and longer recording

time, set QUALITY at NORNAL or ENHANCED and

record at 360x240 or 360x120.

※ Data size of image in PAL system is a little bigger than NTSC system, but the total recording time

is same as in NTSC system.

(4) RESOLUTION : Set recording resolution.

- 60 ips at 720x240(NTSC) , 50 ips at 720x288(PAL)

- 120 ips at 360x240(NTSC) , 100 ips at 360x288(PAL)

- 240 ips at 360x120(NTSC) , 200 ips at 360x144(PAL)

※ Images recorded in 360x240(360x288) or 360x120(360x144) are always played in quad mode.

It is not possible to see those images in full screen mode in playback.

Recording in half or quad resolution is recommended for higher recoding speed, and also to send

more images via IP network.

(5) RECORD IN ALARM : Set record speed (skip rate) in ALARM record mode.

(6) RECORD IN MOTION : Set record speed (skip rate) in MOTION record mode.

(7) CONTINUOUS RECORD : Set record speed (skip rate) in CONTINUOUS record mode.

Set record speed (skip rate)

- 1/1x, 1/2x, ………. 1/999x record speed

- ex: 1/2x ) R->S->R->S…

- ex: 1/3x ) R->S->S->R->S->S->R…

- ex: 1/4x ) R->S->S->S->R->S->S… ( R : RECORD S : SKIP )

- ex : If record resolution is set at 360x240, 1/1x = 120 ips, 1/2x = 60 ips, 1/3x = 40 ips, etc.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

2) SCHEDULE SETUP

Unless you selected other recording mode, DVR system records in Schedule Recording mode.

In SCHEDULE REC SETUP, you set type of recording for every time interval of 2 hours in each day of

the week. Schedule Recording set by manufacturer is recording continuously at its full recording

speed, and it means DVR system record continuously at 120 ips in total at 720x240 resolution.

To set Schedule Recording parameters, enter into SYSTEM MENU-RECORD SETUP-SCHEDULE SETUP

and Press the [ENTER] button.

(1) SCHEDULE SETUP

Set recording type for each recording time interval for a day of the week (2 hours interval).

SCHEDULE REC SETUP

SUN MON TUE WED THU FRI SAT

-M- AM - - -C - -C- - -C- - -C - -C

Use [MODE] button to select edit type and move to

the time interval of a day of the week you want to change.

Press [ENTER] button to select and use [+] or [−] button,

to change the record type. To go next page, use [NEXT]

button.

00-02

02-04

04-06

06-08

08-10

10-12

-M - AM - - -C - - C - - C - -C - - C

- M - AM- - -C - - C - - C - -C - - C

-M - AM- -- C -- C - - C -- C -- C

- - - AM- - -C- - - C - - C - -C - - C

-- - AM- - - C - - C - - C - -C -- C

※ MODE (Edit type)

CELL BY CELL : Set each time interval of a day of the week

DAY OF THE WEEK : Set a day of the week at once

TIME SLOT : Set a time slot at once

ALL : Set page by page at once

CLEAR ALL: Clear page by page

1 / 2

MODE: CELL BY CELL

▲▼◀▶ & [NEXT], EDIT:+ -&[MODE]

A:ALARM M:MOTION C:CONTINUES

※ Unless user press [REC] button to record at full resolution and in SUPER FINE picture quality,

DVR system records in SCHEDULE Record mode.

※ DEFAULT record mode for each time interval of a day of the week set by manufacturer is

CONTINUOUS recording.

※ Record type :

After power on

Exit from menu

Schedule record

End of search or playback

After pressing [STOP] button

After pressing [REC] button

Schedule record

Emergency record (Continuous recording in full performance)

(60(50) ips at 720x240(720x288))

3) HOLIDAY SETUP

HOLIDAY SETUP

Users can set national holiday or holidays on

calendar to record just as setting for Sunday in

SCHEDULE REC SETUP.

< APR >

000/100

SUN MON TUE WED THU FRI SAT

Use [MODE] button to select a month and direction

button to move to a day, and press [ENTER] button to

set a holiday. Then color of date shall be changed to

red, as Sunday.

EDIT HOLIDAY : Set as holiday

CLEAR MON DATA : Cancel the holiday set per month

CLEAR ALL DATA : Cancel all holiday set

MODE : EDIT HOLIDAY

SELECT ▲▼◀▶, EDIT [ENTER]&[MODE]

Download from Www.Somanuals.com. All Manuals Search And Download.

※ The maximum holidays is 100 days.

CHAP. 5 Set Up

5-5. BACK-UP

User can back up the recorded data to CD using CD writer installed in DVR.

Refer to [START] and [END] of data on HDD and set copy from time, [START], and size of data

copied, [SIZE], and move to BURN and press [ENTER] button to start copy.

CD-R SETUP

HDD

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

CD-R

700 MB

CD-R

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[ SIZE ] 700 MB - > 700MB

[ SIZE ]

000MB

BURN

CD-RW BURNING : IMAGE DATA.

SELECT : SETUP BUTTON, JOG SHUTTLE

System Status Messages :

- CD-RW DOOR CLOSE. CHECKING CD-R : Blank CD check

- INPUT BLANK CD : CD writer has no blank CD.

- CD-RW DOOR OPEN : Open CD-RW and insert blank CD –R media into CD drive.

- CD-R MEDIA IS DETECTED : Blank CD-R media has been inserted and detected. DVR system will

display size of blank CD-R.

After you set [START] time and [SIZE] in CD-R sub-menu and then select BURN, DVR system starts

copying images to CD and shows following message.

CD-RW BURINING START

CD-RW BURNING : LEAD-IN

CD-RW BURNING : IMAGE DATA

CD-RW BURING : CLOSE TRACK

CD-RW DOOR OPEN

When burning is completed, CD-R media will be ejected automatically.

To copy more images, repeat above process. In the next back-up process, [START] time in

CD-R sub-menu shall be [END] time in previous back-up, and you can copy images in series

to many CDs as many as you want.

5-6. EXTERNAL DEVICE

Set parameters of external devices connected to DVR, like Ethernet, PTZ camera, RS-232C, etc.

Use direction button to move to sub-menu and Press [ENTER] button to set.

IP CONFIG SETUP

1) TCP/IP SETUP

MAC ADDRESS

IP ADDRESS

IP PORT

_ _ _ _ _ _ _ _ _ _ _

00-0A-A2-00-00-00

_ _ _ _ _ _ _ _ _ _ _

192.168.001.160

_ _ _ _ _ _ _ _ _ _ _

50000

TCP/IP function enables user to see live pictures and

recorded pictures via the internet.

(1) IP CONFIG SETUP :

Show the network information assigned to the DVR

unit. If the DHCP setup status is AUTOMATIC, user

can set the IP port only and if the DHCP setup status

is MANUAL, user must set all parameters.

For detail procedure of Remote viewer program

installation, refer to CHAP. 6 Software

GATEWAY

_ _ _ _ _ _ _ _ _ _ _

192.168.001.001

_ _ _ _ _ _ _ _ _ _ _

255.255.255.000

SUBNET MASK

DHCP SETUP

program.(Remote viewer software).

AUTOMATIC

SELECT MENU : ▲▼, & [ENTER]

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

CONNECTION SETUP

DHCP SETUP

DHCP MODE

MANUAL

TIMEOUT

200 MSEC

RETRY COUNT

DNS SERVER

IP ADDRESS

SUBNET MASK

GATEWAY

000.000.192.168

192.168.001.160

255.255.255.000

192.168.001.001

SELECT : ▲▼, CHANGE VALUE : + -

SELECT MENU : ▲▼, & [ENTER]

(2) CONNECTION SETUP :

- TIME OUT : Adjust TIMEOUT value properly to successfully access to DVMR unit via Internet

line. If data transmission speed is high enough, leave TIMEOUT value as set by

manufacturer (200 msec), and increase it if data transmission via Internet line is

relatively slow. Execute tracert (Tracing Route) in your PC for IP assigned to

DVMR unit, and you can figure out how much TIMEOUT value increased.

- RETRY COUNT : Set the retry number of times for network connection.

RS-232C SETUP

2) RS-232C SETUP

SPEED

576000

User can control the DVR via RS-232C port.

Connect DVR to PC via RS-232C port and control

DVR using keyboard of PC.

LENGTH

STOP BIT

PARITY

NONE

This function is mainly for programmer who

wants to control DVR as part of many devices

connected to PC system, as in SI project.

SELECT : ▲▼, CHANGE VALUE : + -

3) PAN/TILT SETUP

It is to set parameters for PTZ camera connected to DVR unit. DVR unit already includes all

protocols of well-known PTZ cameras like PELCO D type PTZ camera, and user just select MODEL

and set other parameters to control this PTZ cameras, using operation buttons on the front panel of

DVR. If PTZ camera whose protocol is not incorporated into this DVR unit, user must input protocol

of this PTZ camera by himself. Using USB device port, user can upgrade protocol for PTZ camera.

PAN/TILT SETUP

COMMAND SETTING

CHANNEL

MODEL

PTZ ID

PELCO-D

000

BAUDRATE

CMD DELAY

2400 BPS

1 MSEC

COMMAND SETTING

SPEED SETTING

Å PTZ camera set

Å PTZ speed set

COMMAND

LENGTH

CODE

PAN/TILT STOP

0.7

FF 00 00 00

00 00 00 00

SELECT : ▲▼, & [ENTER]

SELECT : ▲▼, CHANGE VALUE : + -

1) CHANNEL : Select channel

2) MODEL : Select camera model (protocol type) per each channel

3) PTZ ID : Select ID

4) BAUDRATE : Select data transmission speed

5) CMD DELAY : Select command delay time

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

5-7. FACTORY DEFAULT

FACTORY DEFAULT

Set the all system parameters as manufacturer first

set before delivery. It is a kind of system

initialization, and manufacturer recommends to do it

when you add new HDD or other changes in

system to make all system ready for normal

operation.

Use direction button to move and Press [ENTER]

button to change parameters. After move to RUN,

Press [ENTER] button for actual Factory Default

setting.

ALL

OFF

SCREEN DISPLAY

CAMERA SETTING

MOTION SETUP

PANTILT SERUP

SCHEDULE SETUP

CONFIGURATION

RUN

SELECT MENU : ▲ ▼, & [ENTER]

5-8. LANGUAGE SETUP

The menu can be displayed in a number of languages.

Press [ENTER] button to select your language.

SYSTEM MENU

DISPLAY SETUP

CONFIGURATION

RECORD SETUP

EXTERNAL DEVICE

FACTORY DEFAULT

LANGUAGE

ENGLISH

SELECT MENU : ▲▼, & [ENTER]

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

6-1. DVR Network Configuration

Now that you are familiar with the equipment and should be able to identify a router from a modem and a

Cat5 network cable from a telephone cable, we will proceed to determine the network scenario that fits

your current network.

Please call your provider to identify what type of service they are providing you. You will need to know

following ;

Upload speed – For your own knowledge for expected frame rates

Download speed – For your own knowledge for expected frame rates

Addressing – For determining what scenario you should follow

Router On Site or Just a Modem – For determining what scenario you should follow

※NOTE : If your provider is using PPPoE (usually DSL providers), you MUST have a router

installed on site and follow CASE C for DVR setup and access.

※PLEASE verify Internet access after installing any new equipment (routers, switches, modems, etc.).

If possible, use a PC on the network to verify that an Internet connection can be made and that all

current configurations on any equipment are up and working properly. Do this before doing ANY

configurations with the DVR. We are assuming that your current equipment is configured properly for

Internet access.

PC’s TCP/IP Setting

Before configuring the DVR, please fill out the information below if applicable ;

Choose any PC on your network and determine its TCP/IP settings;

IP Address :

(ex.192.168.1.5)

(ex. 255.255.255.0)

(ex.192.168.1.1)

Subnet Mask :

Default Gateway :

* For information on how to determine this information, please consult the FAQ page.

Next pages are several network scenarios. Each one is labeled with a letter. Please identify

which scenario your current network falls within and follow the instructions for configuring and

accessing your DVR via TCP/IP.

The box below represents an area that you can’t control. If you are unable or do not have access

to your router for port forwarding. Please contact your provider and request them to forward a port

to the corresponding DVR IP address :

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

Case A : Single Static IP w/Personal Router

Phone line

Or CATV

Personal

Router

w/switch

Internet

Modem

(ISP)

DVR

Configure the DVR as follows :

1. Set the DVR to MANUAL for the TCP/IP settings. Do not use DHCP SETUP for this

application or verify that DHCP SETUP is set to MANUAL.

2. IP ADDRESS : assign it a private IP address (ex : 192.168.0.105)

a. You need to assign the DVR an IP address just as you would a PC.

b. The IP address you assign must be unique to your local network as well as “match”

your local network. For information on how to choose a unique IP that matches your

network, consult the FAQ.

c. The IP address you assign must be a private IP address. For information on what a

private IP address is, consult the FAQ.

d. When configuring the DVR’s IP address information, the version of firmware within

the units may display the IP addresses differently. For simplicity sake,

192.168.1.105 may have to be configured as 192.168.001.105

3. PORT NUMBER : 50000

a. 4 channel, 8 channel & 16 channel : This number is stated explicitly.

b. For most situations, please use the default 50000 for simplicity.

4. SUBNET MASK : 255.255.255.0 (example)

a. Assign the DVR the same exact subnet mask as your PC.

5. GATEWAY : 192.168.0.1(example)

a. Assign the DVR the same exact gateway (or default gateway) as your PC.

6. Please DO NOT configure MAC ADDRESS or DHCP SETUP.

7. You will need to forward port 50000 through your router. Please forward port 50000 to

the IP ADDRESS you have assigned the DVR.

8. Your DVR is now ready for access.

* For detail information on the above, please consult the FAQ.

Accessing the DVR using the Remote Software for CASE A

LOCALLY :

To access the DVR locally, that is from your local network on site from where the DVR

is installed. Open the remote viewing software and click on the “Settings” button.

As far as TCP/IP connectivity is concerned only 4 entries need to be made :

1. IP address : Input the IP address that you assigned the DVR. As in the above example

I would input the private IP address of 192.168.0.105

2. Port : 50000(this has to match what is configured in the router and in the DVR)

3. User ID : (always leave the default “ admin “)

4. Password : this must match what is configured in the DVR

a) 4,8,16 channel default : Blank (NO PASSWORD)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

REMOTELY :

To access the DVR remotely, that is from outside your local network, follow the above

directions for accessing locally, except for the IP address. For CASE A, you have received a

static IP from your Internet provider. That static IP address is what you must enter into the

software for connectivity to take place (NOT the IP of the DVR). Contact your provider if you

have misplaced the forms stating your static IP address. Since you are accessing the DVR

via a router, you must enter the router’s WAN IP address which is the exactly the same as

the static IP that you have received from your Internet provider.

Case B : Single Static IP Directly Connected to the DVR

Phone line

Or CATV

Internet

Modem

(ISP)

DVR

Configure the DVR as follows :

1. Set the DVR to MANUAL for the TCP/IP settings. Do not use DHCP SETUP for this

application or verify that DHCP SETUP is set to MANUAL.

2. IP ADDRESS : assign it a public IP address (ex : 24.106.1.195)

a. You need to assign the DVR an IP address just as you would a PC.

b. The static IP address that you received from your Internet provider is the address

that you will assign this DVR, if you do not know this IP address please contact your

provider.

c. When configuring the DVR’s IP address information, the version of firmware within

the units may display the IP addresses differently. For simplicity sake,

24.106.1.195 may have to be configured as 24.106.001.195

3. PORT NUMBER : 50000

a. 4 channel, 8 channel & 16 channel : This number is stated explicitly.

b. For most situations, please use the default 50000 for simplicity.

4. SUBNET MASK : 255.255.255.240 (example)

a. Along with your static IP address you should have received your subnet mask from

your Internet provider. Please use that subnet mask when configuring the DVR. If

you did not receive this information contact your service provider.

5. GATEWAY : 24.106.1.193(example)

a. Along with your static IP address you should have received your gateway or default

gateway from your Internet provider. Please use that gateway when configuring the

DVR. If you did not receive this information contact your service provider.

6. Please DO NOT configure MAC ADDRESS or DHCP SETUP.

7. Your DVR is now ready for access.

Accessing the DVR using the Remote Software for CASE B

LOCALLY :

You cannot physically access the unit locally since a router was not used in this case.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

REMOTELY :

To access the DVR remotely, open the remote viewing software and click on the “Settings”

button. As far as TCP/IP connectivity is concerned only 4 entries need to be made :

For CASE B, you have received a static IP from your Internet provider. That static IP

address is what you must enter into the software for connectivity to take place (this should

be the same IP address configured in the DVR). Contact your provider if you have

misplaced the forms stating your static IP address. As in the above example I would input

the :

1. Public IP address of 24.106.1.195

2. Port : 50000(this has to match what is configured in the DVR)

3. User ID : (always leave the default “ admin “)

4. Password : this must match what is configured in the DVR

a) 4,8,16 channel default : Blank (NO PASSWORD)

Case C : Dynamic or PPPoE IP w/Personal Router

Phone line

Or CATV

Personal

Router

w/switch

Internet

(ISP)

Modem

DVR

Configure the DVR as follows :

1. Set the DVR to MANUAL for the TCP/IP settings. Do not use DHCP SETUP for this

application or verify that DHCP SETUP is set to MANUAL.

2. IP ADDRESS : assign it a private IP address (ex : 192.168.0.105)

a. You need to assign the DVR an IP address just as you would a PC.

b. The IP address you assign must be unique to your local network as well as “match”

your local network. For information on how to choose a unique IP that matches your

network, consult the FAQ.

c. The IP address you assign must be a private IP address. For information on what a

private IP address is, consult the FAQ.

d. When configuring the DVR’s IP address information, the version of firmware within

the units may display the IP addresses differently. For simplicity sake,

192.168.1.105 may have to be configured as 192.168.001.105

3. PORT NUMBER : 50000

a. 4 channel, 8 channel & 16 channel : This number is stated explicitly.

b. For most situations, please use the default 50000 for simplicity.

4. SUBNET MASK : 255.255.255.0 (example)

a. Assign the DVR the same exact subnet mask as your PC.

5. GATEWAY : 192.168.0.1(example)

a. Assign the DVR the same exact gateway (or default gateway) as your PC.

6. Please DO NOT configure MAC ADDRESS or DHCP SETUP.

7. You will need to forward port 50000 through your router. Please forward port 50000 to

the IP ADDRESS you have assigned the DVR.

8. Your DVR is now ready for access.

* For detail information on the above, please consult the FAQ.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

Accessing the DVR using the Remote Software for CASE C

LOCALLY :

To access the DVR locally, that is from your local network on site from where the DVR

is installed. Open the remote viewing software and click on the “Settings” button.

As far as TCP/IP connectivity is concerned only 4 entries need to be made :

1. IP address : Input the IP address that you assigned the DVR. As in the above example

I would input the private IP address of 192.168.0.105

2. Port : 50000(this has to match what is configured in the router and in the DVR)

3. User ID : (always leave the default “ admin “)

4. Password : this must match what is configured in the DVR

a) 4,8,16 channel default : Blank (NO PASSWORD)

REMOTELY :

To access the DVR remotely, that is from outside your local network, follow the above

directions for accessing locally, except for the IP address. For CASE C, you have received a

dynamic or PPPoE IP from your Internet provider. That static IP address is what you must

enter into the software for connectivity to take place (NOT the IP of the DVR). You may be

able to contact your provider to determine your current IP address. You can also try

accessing your router and locating the status page that should list the WAN or Internet IP

address. Since you are accessing the DVR via a router, you must enter the router’s WAN IP

address which is the exactly the same as the IP that you have dynamically received from

your Internet provider. Take into consideration that this scenario is not recommended, due to

the nature of dynamic addressing. Dynamic address may change randomly or on power

failures. If you are unable to connect suddenly, first verify that your dynamic IP address has

not changed.

Case D : Multiple Static IPs w/Personal Router

Phone line

Or CATV

Personal

Router

w/switch

Internet

(ISP)

Modem

DVR

Configure the DVR as follows :

1. Set the DVR to MANUAL for the TCP/IP settings. Do not use DHCP SETUP for this

application or verify that DHCP SETUP is set to MANUAL.

2. IP ADDRESS : assign it a public IP address (ex : 24.106.1.195)

a. You need to assign the DVR an IP address just as you would a PC.

b. For this case you must have received several available static IP addresses. Of those,

choose one that is not in use to which you can assign the DVR, if you do not know your

available IP addresses please contact your provider.

c. When configuring the DVR’s IP address information, the version of firmware within

the units may display the IP addresses differently. For simplicity sake,

24.106.1.195 may have to be configured as 24.106.001.195

3. PORT NUMBER : 50000

a. 4 channel, 8 channel & 16 channel : This number is stated explicitly.

b. For most situations, please use the default 50000 for simplicity.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

4. SUBNET MASK : 255.255.255.240 (example)

a. Along with your static IP addresses you should have received your subnet mask

from your Internet provider. Please use that subnet mask when configuring the DVR.

If you did not receive this information contact your service provider.

5. GATEWAY : 24.106.1.193(example)

a. Along with your static IP addresses you should have received your gateway or

default gateway from your Internet provider. Please use that gateway when

configuring the DVR. If you did not receive this information contact your service

provider.

6. Please DO NOT configure MAC ADDRESS or DHCP SETUP.

7. Your DVR is now ready for access.

Accessing the DVR using the Remote Software for CASE D

LOCALLY :

To access the DVR locally, open the remote viewing software and click on the “Settings”

button. As far as TCP/IP connectivity is concerned only 4 entries need to be made.

For CASE D, you have received a static IP from your Internet provider. That static IP address

is what you must enter into the software for connectivity to take place (this should be the same

IP address configured in the DVR). Contact your provider if you have misplaced the forms

stating your static IP address. As in the above example I would input the :

1. Public IP address of 24.106.1.195

2. Port : 50000(this has to match what is configured in the DVR)

3. User ID : (always leave the default “ admin “)

4. Password : this must match what is configured in the DVR

a) 4,8,16 channel default : Blank (NO PASSWORD)

REMOTELY :

To access the DVR remotely, just follow the same instructions for local access.

Case E : Dynamic IP Directly Connect to the DVR with High Speed Cable

CATV

Internet

Modem

(ISP)

DVR

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

Configure the DVR as follows :

For this application you can still use the DVR for remote access, yet you will have to

verify the IP address within the DVR on a continuous basis to ensure the IP address

hasn’t changed. This setup will not work with most Dynamic DSLDKDKD providers.

In any instance in which the DVR cannot detect an IP, please use CASE C.

1. Unplug the power from the modem.

2. Turn off the DVR.

3. After waiting 5 minutes, power on the modem followed by the DVR.

4. Enter the TCP/IP Setup menu.

5. Enter DHCP Setup.

6. Select IP DETECT MODE.

7. Press ENTER.

8. It should now display DHCP.

9. Cursor down to REQUEST IP and hit ENTER.

10. The Unit will now send a request to a DHCP server asking for IP address information.

a. If it is unable to detect an IP address, contact your ISP to reset the modem, before

trying again.

b. After an IP has been received, the lease time listed under IP LEASE TIME is just

notifying you when the DVR will try to renew the IP address. Typically it will try to

receive the same IP, but it is a good idea to check your IP on a continuous basis.

11. Exit DHCP SETUP.

12. Select IP ADDRESS to determine the IP address the unit has received.

13. The DVR is now ready for access.

Accessing the DVR using the Remote Software for CASE E

LOCALLY :

You cannot physically access the unit locally since a router was not used in this case.

REMOTELY :

To access the DVR remotely, open the remote viewing software and click on the “Settings”

button. As far as TCP/IP connectivity is concerned only 4 entries need to be made.

For CASE E, you have received a dynamic IP from your Internet provider. That dynamic IP

address is what you must enter into the software for connectivity to take place (this should

be the same IP address configured in the DVR). Check your DVR’s current IP address for

access :

1. IP address : 24.106.1.195(example)

2. Port : 50000(this has to match what is configured in the DVR)

3. User ID : (always leave the default “ admin “)

4. Password : this must match what is configured in the DVR

a) 4,8,16 channel default : Blank (NO PASSWORD)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

6-2. Remote Viewer program

MAIN INTERFACE

- Power switch : Press the Power switch to exit the program. Please disconnect the live feed before

powering off the software

2 - Connect button : Press the Connect button to view the live images from the DVR. These are the same

images being displayed on the monitor of the DVR, with a delay depending on your

internet connection at both the DVR location and from where you’re currently accessing.

- Disconnect button : Press this button to disconnect from the DVR unit. Then you may power off the

software.

- Screen Division button : Select how many channels to view simultaneously(single,4-split,9-split,

or 16-split). When you select a view you will see the Channel Numbers highlighted

which determine what channels are currently being viewed.

- Channel number button : Select the channel that you want to view based on what Screen Division

view is enabled.

- Status window : Display’s the current time and date based. The date is in the format : Year/Month/Day.

You will also see the status of your connection.

- Setting, Playback, and Sequence buttons ;

a. Setting : Enables the software configuration screen.

b. Playback : Enables the remote playback screen.

c. Sequence : When in single channel view, hitting the sequence button will sequence

through all active channels at a speed specified in the settings menu.

- PTZ control : You can control a PTZ camera via the software with these controls.

a. First, you must input or configure the specific PTZ protocol into the software in

order to communicate with the PTZ device.

b. When you press any of the controls for the PTZ, please press and hold the button

for 1-2 seconds per instance to compensate for the data transmission rate. If you

do not and instead simply click the PTZ buttons, you may get undesired results

(having the requested operation transmitted repeatedly, regardless of your intention).

c. The plus and minus buttons send the PTZ commands to the corresponding PTZ

camera ID.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

Setting Screen

Name (LABEL) : This just identifies your settings. The settings are automatically saved under this label

when you hit ‘OK’.

IP Address : Based on your network scenario and from where you’re accessing, enter the appropriate

IP address.

PORT : Enter the Port Number you assigned the DVR.

ID : Always enter ‘admin’

Password : This must match the password on the DVR. For simplicity, just use numbers.

- It can add and save several IP Addresses for prompt multi-site monitoring.

PTZ TYPE : If using PTZ device or camera, select the protocol your PTZ camera is using from the list of

preconfigured protocols.

Circular Monitoring Interval : This indicates the speed of the channels sequence when the

SEQUENCE button is used from the main interface.

PTZ Baud Rate : Enter the Baud Rate of your PTZ camera.

Run in full screen mode : When checked, this will enable the program to re-adjust the interface to

completely fill your computer screen.

Set Path to Save Downloaded image : Determines the location and folder on your PC where the

downloaded video clips are stored. If you do not specify a valid

location, The viewer program will save all files in the default

location of C:\Program Files\DvrRemoteViewer4

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

PLAYBACK INTERFACE through Remote Viewer

Function of each button in Search window.

Exit : Exit to live window.

Full screen : Select a certain camera to view in full screen.

Quad : To view quad mode (4 channels at the same time)

Time : The recording time & date information of the pictures which is being played.

Channel selection : Select each camera.

Time selection : Select a time from which user want to see. The playback will be started from this

point.(drag the point using mouse)

Start and end time : Indicate record starting time and end time of images on HDD

Other operating button : Refer to the next page description.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

: Play fast backward

: Play backward(1X)

: Move to the start of recording

: Move to the previous hour

: Move to the afterward hour

: Move to the end of recording

: Play forward(1X)

: Play fast forward

: Stop playback

: Command button.

a) SAVE : After pressing the Stop button, click SAVE button to save the currently viewed image in jpg

format.

b) PRINT : After pressing the Stop button, click PRINT button to print the currently viewed image.

c) EVENT : To be available later

d) RECORD : Press this button to download playback images transmitted from DVR unit into your

PC. Images downloaded is saved in the folder set in Remote Viewer Setup.

Press the RECORD button again to stop downloading.

User can see saved images using Media Player.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

: Calendar

Use this to select the date you wish to search. The filled in square outlines the date that is at the

beginning of the hard drives. The outlined square indicates the data at the end of the hard drives.

Select the date you wish to view. Verify a filled in square for that particular date. If an invalid date is

selected it will default to the beginning of the hard drive(s).

Notice : To see continuous live view, it is recommended to set recording mode of DVR unit

in continuous recording mode. If it is set at motion recording mode, image transmission

is done only when motion is detected, and user only see still images for most of cases.

Notice : While user access to DVR unit via IP network to see live view, the DVR unit continues to record.

While user see recorded images via IP, DVR unit shows live images through monitor connected

to DVR unit. This is only for TRIPLEX MODE.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

6-3. Back-up CD Player

DVR units are with a built-in CD-RW, and user can copy images to CD.

Using back-up CD player, user can see images on back-up CD, and function of each button in

Back-up CD player is as below.

Time : Current time.

Status Window : Start & End of time & date, Status of operating button.

When user play forward/backward, recorded time will appear.

Play Speed button : User can adjust play speed by pressing up/down button.

(2X,4X,8X,16X,32X,64X) Delay : (1, 1/2, 1/4, 1/8, 1/16)

Operation button : User can search recorded data using these buttons.

a) Move the slide bar to start position

b) Play fast backward in preset speed

c) Play backward at 1x speed

d) Pause

e) Play forward at 1x speed

f ) Play fast forward in preset speed

g) Move the slide bar to end position

Function button

a) OPEN : Open the Back-up CD Player.

b) EDIT : User can edit, save and print recorded image on Edit mode. This edit button will work

when you selected one of 16 cameras.

c) EXIT : Exit from Back-up CD Player.

Channel button : Select channel to see pictures in full screen.

Slide Bar : Move to a point from which user want to see.

Page button : This button is just working when screen-division is 4-split in 8 ch DVR, or 4-split or

8-split in 16 ch DVR. Moves to next page.

Screen division : 1/4/9/16

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

Image EDIT

Contrast

Sharpness

Blur

Brightness

Save Print Exit

1. Image Edit Status Window : Shows record time & date, Image size, Command status.

2. Edit Button : User can adjust color tone of copied images using this button.

- Contrast :

a) make bright part of image brighter and dark part of image darker

b) To reduce light and shade, lower contrast a little

- Brightness

a) make an image brighter

b) make an image darker

- Sharpness : give sharp-edge effect

- Blur : make an image soft

3. Function button

a) Save : User can save an image in JPEG format. It is saved in the folder where you installed

back-up CD player.

b) Print : User can print current image user selected

c) EXIT : Return to Back-up CD Player mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

6-4. Frequently Asked Questions

F A Q

How do I determine my PC’s TCP/IP settings?

For Window 98 / Me Users

1. Click on the Start Menu, select RUN

2. Type ‘winipcfg’ (without the quotes), hit Enter

3. Use the drop down list to select your 10/100 Fast Ethernet Adapter(not the PPP adapter)

4. Now you will see your IP Address, Subnet Mask, and Default Gateway information

For Window 2000 / XP

1. Click on the Start Menu, select RUN

2. Type ‘cmd’ (without the quotes), hit Enter

3. The command prompt will appear. At the prompt type – “ipconfig”(without the quotes)

4. This will list your current IP address, subnet mask, and default gateway.

How do I choose a unique IP that matches my network?

For your home or small office, ensure that all devices on your network are running. Chose an IP

address that you wish to assign the DVR. To ensure the IP address that you will assign the DVR

matches your network, review the “PC’s TCP/IP settings” that you had recorded earlier. See some

examples below.”

- If your “IP Address” entry in “PC’s TCP/IP Settings” was 192.168.0.y and your “Subnet Mask” was

255.255.255.0 then use 192.168.0.x for your DVR’s IP Address (“x” meaning any number between

2-254 that you wish, as long as it passes the “PING” test).

- If your “IP Address” entry in “ PC’s TCP/IP Settings” was 192.168.1.y and your “Subnet Mask” was

255.255.255.0 then use 192.168.1.x for your DVR’s IP Address (“x” meaning any number between

2-254 that you wish, as long as it passes the “PING” test).

After choosing an appropriate IP address, ‘PING’ the IP address that you plan to assign to the DVR.

If you receive a “Request timed out”, then you may use that IP address (the PING test has passed).

* If your “IP Address” entry under “PC’s TCP/IP Settings” is not a 192.168.z.y address with a

“Subnet Mask” of 255.255.255.0 then please contact our Support Center.

** If your “IP Address” entry under “PC’s TCP/IP Settings” is not a 192.168.z.y address, please

contact our Support Center.

How do I “PING” an IP address ?

1. Open an MS-DOS (or Command) prompt.

2. At the prompt type – “ping xxx.xxx.xxx.xxx” (without the quotes and replace the x’s with an IP

address)

3. Press Enter

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

How do I “ PING” an IP address ?

1. Open an MS-DOS (or Command) prompt

2. At the prompt type – “ping xxx.xxx.xxx.xxx” (without the quotes and replace the x’s with an IP

address)

3. Press Enter

Ping Result. When testing for a usable IP address, verify that you get a “Request timed out”

message. This ensures that the IP address that you have tested is not being used by another

device on your network.

How do I open an MS-DOS or Command Prompt ?

Windows 98/Me : Start -> Programs -> Accessories -> MS-DOS prompt

Windows 2000/XP : Start -> (All) Programs -> Accessories -> Command Prompt

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

How do I choose a private IP address : Below lists the ranges for private addresses.

Private Class A address space : 10.0.0.0 – 10.255.255.255

Private Class B address space : 172.16.0.0 – 172.31.255.255

Private Class C address space : 192.168.0.0 – 192.168.255.255

For most cases you will choose a private IP address that falls in the Class C address space.

(ex. 192.168.1.x or 192.168.0.x)

How do I forward a port in my router?

For cases A&C you must forward a TCP port through your router. This port is the Port Number specified

in the DVR. For most cases you should be able to leave the default at 50000.

Every router has a different procedure for forwarding ports. Please consult your router’s user guide on

how to correctly configure Port Forwarding.

Can I configure my DVMR for remote access using a Dial-Up connection?

Yes, it is possible, but not recommended. With a live video feed, the bandwidth that a dial-up

connection provides is very poor. In addition, you will have to install a device that allows your

DVR to connect directly to your dial-up phone line (roughly $200).

Why is my remote video jerky?

The frame rates received via the Internet are all dependent on your connection condition and

speed at both the DVR site and the location from where you are accessing the DVR. The

fastest frame rates are achieved locally.

Important Notes Regarding the Remote Viewer and the DVR

When you are in SCAN MODE and are playing back data, you are actually accessing the DVR

remotely and placing the unit itself in playback mode, which enables DVR to record the images.

When selecting a date/time to play back. First, ensure that the stop button has been pressed

(screen should have no images displayed). Next, select the date you wish to view and verify that

it is a valid date on the hard drive and that the selected data is outlined with the box filled in.

Then, select the time you wish to access for that particular date. Finally, hit the single-arrow

play or double-arrow play button.

To see continuous live view, we recommend NOT setting the DVR for motion detection. The

remote viewer only sends images when there is motion and this motion is not fluid. The remote

SCAN MODE option still operates as normal. We recommend only using the remote playback

feature if you set the DVR for Continuous Record.

The DVR still records images in the remote scan mode, but recording rates drop by a small amount.

Therefore, we recommend remote access to DVR for Scan when needed.

The remote viewer is only compatible with Windows operating systems.

If the connection is lost during remote playback, exit SCAN MODE, reconnect to the live view,

then re-enter SCAN MODE.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 7 Specifications

• The best picture quality in Playback(JPEG-2000)

• Real time live display in all channels

• 4 channel video 240(200)ips recording capability

• Triplex (Playback/Recording/Ethernet)

• Multi-language menu

• Remote monitoring and download through network

• Convenient search function with Jog/shuttle

• VGA option available (Supporting TFT LCD Monitor)

• USB (Device) port for firmware upgrade

• Easy PTZ camera control by pre-assigned buttons

• Password Protection

• Remote Controller

Multiplex function

Triplex (Playback/Recording/Ethernet)

Storage

Capacity

Video

Internal

HDD

Up to 2 HDDs with no limitation in capacity

CD-RW

Composite

VGA

For Backup (Can be replaced by 3rd HDD)

Inputs

4Ch

Outputs

2Ch (Monitor / VCR)

1Ch (Supporting TFT LCD Monitor/Option)

Loop out

4Ch

Compression

JPEG-2000

Basic

Compression Rate

(Image size fixed)

Normal

Enhanced

Fine

Super Fine

Display Speed

Recording Mode

Real Time display

Time, Motion, schedule, Alarm

Recording

/Search

Event Search, Date/Time Search, Jog/Shuttle Search

Full (60/50), Dual (120/100), Quad(240/200)

Recording Speed (NTSC/PAL)

Recording Resolution (NTSC/PAL) Full (720x240/720x288), Dual (360x240/360x288), Quad (360x120/360x144)

Multi-language

English, Spanish, German, Italy, France, to be added more

1~99 sec selectable

Switching Interval

Live Division Screen

1 / 4 Split

Digital Zoom, Freeze function available in Live mode, PIP

Alarm

Inputs

4 Alarms (NO/NC selectable in SETUP menu)

1 (NO/NC)

Outputs

Post Alarm

Duration of alarm output : 1 sec ~ 59 sec selectable

Area division : 16 x12 / Detection Division : 32 x 24

Ethernet (TCP/IP), Remote viewer program included

VCR, CD-RW back-up, Download via IP Network

RS-485, Key Control( Key assigned for each PTZ command)

USB port for firmware upgrade, CD-R

For PTZ camera control

Motion Detection

Network

Backup

PTZ Control

Firmware upgrade

Serial I/F

RS-485

RS-232C

For operation using keyboard of PC

DC 12V 5A Adaptor

Power Requirements

Weight

8.5kg

Dimensions(WXHXD)mm

Packing

436 X 396 X 88

600 X 520 X 180

Design and specifications are subjected to changes without notice

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP 7. 제품의 사양 및 규격

MEMO :

Download from Www.Somanuals.com. All Manuals Search And Download.

Best Picture Quality - JPEG2000

Download from Www.Somanuals.com. All Manuals Search And Download.

LG Electronics Cell Phone IP3100 User Manual
LG Electronics Cell Phone VX8550 User Manual
LG Electronics Clothes Dryer P154 User Manual
LG Electronics Flat Panel Television 22LF4520 User Manual
Linn Stereo Amplifier PRE AMPLIFIER User Manual
Magnadyne Laptop Docking Station MV VS2 User Manual
Magnadyne Stereo Receiver RV4000 User Manual
Marmitek Home Security System DOORGUARD300TM User Manual
MartinLogan Speaker Vignette On Wall Off Wall Loudspeaker User Manual
Maytag Espresso Maker MAT14PD User Manual