Matsushita Laptop CF 29N3LGZBM User Manual
ORDER NO. CPD0604069C1  
Notebook Computer  
CF-29  
This is the Service Manual for  
the following areas.  
M …for U.S.A. and Canada  
Model No. CF-29N3LGZBM  
© 2006 Matsushita Electric Industrial Co., Ltd. All rights reserved.  
Unauthorized copying and distribution is a violation of law.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LASER SAFETY INFORMATION  
For U.S.A.  
Class 1 LASER-Product  
This product is certified to comply with DHHS Rules 21 CFR Subchapter J.  
This product complies with European Standard EN60825 (or IEC Publication 825)  
For all areas  
This equipment is classified as a class 1 level LASER product and there is no hazardous LASER radiation.  
Caution:  
(1) Use of controls or adjustments or performance of procedures other than those specified herein may result in  
hazardous radiation exposure.  
(2) The drive is designed to be incorporated into a computer-based system or unit which has an enclosing cover.  
It should never be used as a stand alone drive.  
Danger:  
The serviceman should not remove the cover of drive unit and should not service because the drive unit is a non-  
serviceable part.  
Please check DANGER label on PD-drive unit.  
• Unplug the AC power cord to the equipment before opening the top cover of the drive.  
When the power switch it on, do not place your eyes close to the front panel door to look into the interior of the unit.  
LASER Specification  
Class 1 level LASER Product  
Wave Length: DVD 658±8 nm  
CD 775~815 nm  
Laser safety information is appropriate only when drive with laser is installed.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
1 Diagnosis Procedure ······································································································1-1  
2 Power-On Self Test (Boot Check) ··················································································2-1  
3 List of Error Codes ··········································································································3-1  
4 Diagnostic Test ···············································································································4-1  
5 Self Diagnosis Test ·········································································································5-1  
6 Wiring Connection Diagram ···························································································6-1  
7 Disassembly/Reassembly ······························································································7-1  
8 Exploded View ················································································································8-1  
9 Replacement Parts List ··································································································9-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Diagnosis Procedure  
1.1. Basic Procedure  
1-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2. Troubleshooting  
Please take note of the following two points with regard to troubleshooting:  
1. Know-how of diagnosis upon occurrence of heavy troubles, e.g. ‘Set cannot be turned ON’, ‘Set fails to start’, ‘No display on  
screen’, etc.  
2. Explanation of each trouble, mainly symptom of trouble in operation.  
Flow Chart  
Pay attention to the following points when in pursuit of the cause of a troubleshooting.  
1. Peripheral apparatus connected with the set should all be removed before operation check.  
2. Make sure that cables, boards, etc. are not coming off, and recheck the contact condition.  
START  
AC  
NG  
Set cannot be supplied with current.  
Power lamp fails to light up.  
Adaptor/Battery  
Output voltage  
Replace AC Adaptor/Battery  
OK  
Check contact condition of power input terminal. Replace if  
defective.  
Check Power SW. Replace if defective.  
NO  
YES  
NG  
Power lamp  
check  
Dark display on screen.  
Screen fails to display.  
Replace inverter board.  
Check inverter cable continuity. Replace if defective  
Inverter board  
OK  
NO  
NG  
LCD back  
Replace LCD back light.  
light lighting  
YES  
LCD unit  
check  
Replace LCD unit.  
OK  
NO  
BIOS operation  
check  
Replace main board (Check fuse at power source).  
Failure in starting  
YES  
NG  
OK  
NG  
Refer to POST  
error code table.  
Result of  
POST  
Replace main board.  
Heavy trouble e.g.,  
Set-up utility  
starting  
Replace main board.  
‘Set cannot be turned  
ON’, ‘Set fails to start’,  
‘No display on  
OK  
Return set-up utility setpoint to the state of ‘delivery from factory’.  
screen’, etc.  
Check HDD cable connection and continuity.  
NO  
Replace if defective.  
Replace HDD & Reinstall.  
Replace main board.  
HDD access  
YES  
NG  
Main board  
check  
Replace main board  
Not displayed properly on screen.  
Some or all keys cannot be input.  
OK  
Make sure of contact of K/B connector in use.  
Replace keyboard or main board.  
Each kind of  
trouble in  
operation.  
Check if there are any flaws on DVD or CD  
media. Since flaws may appear on specific  
media, DVD or CD media can be defective.  
NO  
Trouble  
symptoms on some  
of DVD or CD  
DVD/CD CALL not practicable.  
YES  
Replace DVD drive.  
Replace main board.  
*Clean DVD-ROM drive with an applicator.  
Starts but operates unstably.  
Reinstall HDD.  
Replace main board.  
END  
1-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Power-On Self Test (Boot Check)  
Outline of POST  
The set has a boot check function called POST (Power-On Self Test) in it. The condition of the main body is diagnosed by checking  
beep sound or error code.  
Start .............Test begins automatically when power switch is set to ON.  
Normal finish .....After memory checking, a beep sound is issued once and the set is placed into automatic stop.  
Note: If no error occurs, nothing is displayed. (No display of OK, etc.)  
Error Diagnosis by Checking Beep Signal Sound  
The beep sound is as follows:  
(1 (long sound) -2-3-4)  
(Length of bar shows length of sound.)  
= long sound (about 0.4 sec.),  
= short sound (about 0.2 sec.), Length between sounds is about 0.1 sec.  
Table of errors classified by beep sounds  
Diagnosis  
Beep signal sound  
Error message  
BIOS ROM error  
Main board  
1(long sound)-2  
1-2-2-3  
BIOS ROM error  
1-3-1-1  
RAM error  
1-3-1-3  
Keyboard controller error  
RAM error  
1-3-4-1  
1-3-4-3  
RAM error  
1-4-1-1  
RAM error  
2-1-2-3  
BIOS ROM error  
2-2-3-1  
Occurrence of unexpected offering  
(Note) A beep sound is also issued in case of other I/O trouble.  
2-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. ListofErrorCodes<Only when the port replicator is connected>  
The following is a list of the messages that BIOS can display. Most of them occur during POST.  
Some of them display information about a hardware device, e.g., the amount of memory  
installed. Others may indicate a problem with a device, such as the way it has been configured.  
Following the list are explanations of the messages and remedies for reported problems.  
If your system displays one of except the messages marked below with an asterisk (*), write  
down the message and contact Panasonic Technical Support. If your system fails after you make  
changes in the Setup menus, reset the computer, enter Setup and install Setup defaults or correct  
the error.  
0200 Failure Fixed Disk  
Fixed disk in not working or not configured properly. Check to see if fixed disk is attached  
properly. Run Setup. Find out if the fixed-disk type is correctly identified.  
0210 Stuck key  
Stuck key on keyboard.  
0211 Keyboard error  
Keyboard not working.  
0212 Keyboard Controller Failed  
Keyboard controller failed test. May require replacing keyboard controller.  
0213 Keyboard locked - Unlock key switch  
Unlock the system to proceed.  
0230 System RAM Failed at offset: nnnn  
System RAM failed at offset nnnn of in the 64k block at which the error was detected.  
0231 Shadow RAM Failed at offset: nnnn  
Shadow RAM failed at offset nnnn of the 64k block at which the error was detected.  
0232 Extended RAM Failed at offset: nnnn  
Extended memory not working or not configured properly at offset nnnn.  
0250 System battery is dead - Replace and run SETUP  
The CMOS clock battery indicator shows the battery is dead. Replace the battery and run  
Setup to reconfigure the system.  
*0251 System CMOS checksum bad - Default configuration used  
System CMOS has been corrupted or modified incorrectly, perhaps by an application  
program that changes data stored in CMOS. The BIOS installed Default SETUP Values.  
If you do not want these values, enter Setup and enter your own values. If the error persists,  
check the system battery or contact Panasonic Technical Support.  
0260 System timer error  
The timer test failed. Requires repair of system board.  
0270 Real time clock error  
Real-time clock fails BIOS test. May require board repair.  
*0280 Previous boot incomplete - Default configuration used  
Previous POST did not complete successfully. POST loads default values and offers to run  
Setup. If the failure was caused by incorrect values and they are not corrected, the next boot  
will likely fail. On systems with control of wait states, improper Setup settings can also  
terminate POST and cause this error on the next boot. Run Setup and verify that the  
wait-state configuration is correct. This error is cleared the next time the system is booted.  
0281 Memory Size found by POST differed from EISA CMOS  
Memory size found by POST differed from EISA CMOS.  
3-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02D0 System cache error - Cache disabled  
Contact Panasonic Technical Support.  
02F0: CPU ID:  
CPU socket number for Multi-Processor error.  
02F4: EISA CMOS not writable  
ServerBIOS2 test error: Cannot write to EISA CMOS.  
02F5: DMA Test Failed  
ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.  
02F6: Software NMI Failed  
ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt).  
02F7: Fail - Safe Timer NMI Failed  
ServerBIOS2 test error: Fail-Safe Timer takes too long.  
device address Conflict  
Address conflict for specified device.  
Allocation Error for: device  
Run ISA or EISA Configuration Utility to resolve resource conflict for the specified device.  
Failing Bits: nnnn  
The hex number nnnn is a map of the bits at the RAM address which failed the memory test.  
Each 1 (one) in the map indicates a failed bit. See error 230,231 or 232 for offset address of  
the failure in System, Extended or Shadow memory.  
Invalid System Configuration Data  
Problem with NVRAM (CMOS) data.  
I/O device IRQ conflict  
I/O device IRQ conflict error.  
Operating System not found  
Operating system cannot be located on either drive A: or drive C: Enter Setup and see if  
fixed disk and drive A: are properly identified.  
Parity Check 1 nnnn  
Parity error found in the system bus. BIOS attempts to locate the address and display it on  
the screen. If it cannot locate the address, it displays ????. Parity is a method for checking  
errors in binary data. A parity error indicates that some data has been corrupted.  
Parity Check 2 nnnn  
Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the  
screen. If it cannot locate the address, it displays ????.  
Press <F1> to resume, <F2> to Setup  
Displayed after any recoverable error message. Press <F1> to start the boot process or <F2>  
to enter a Setup and change the settings. Write down and follow the information shown on  
the screen.  
3-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Diagnostic Test  
4.1 Equipment  
(1) Test Computer ································································································ 1 unit  
(2) AC Adapter ····································································································· 1 pc.  
(3) External Printer ······························································································· 1 unit  
(4) Loopback Plug (Parallel Port Test) [ P/N: DFWV95C0081 ] ··························· 1 pc.  
(5) Loopback Plug (Serial Port Test for RS232C) [ P/N: DFWV95C0067 ] ········· 1 pc.  
(6) Floppy Disk containg file DIAG ······································································· 1 pc.  
4.2 Preparation  
(1) Connect the AC Adapter and External Printer to the computer.  
(2) The System Setup should be set to the factory setting values by executing the “SETUP  
UTILITY” which can be invoked by F2 key at the POST.  
If not, the messages and items of the diagnostic test may not be displayed properly on the  
LCD.  
(3) The serial port must be enabled in the “SETUP UTILITY” in order to execute the “1st SERIAL  
PORT” test.  
(4) Connect the serial loopback plug.  
(5) In order to test the parallel port with Loopback Plug, disconnect the printer cable and connect  
the parallel loopback plug with Power OFF.  
4.3 NOTICE  
When “Enter password” is displayed, use “Password Skipping Plug” in order to skip the user  
password.  
1) Connect the parallel plug to the parallel port.  
2) Connect the PS/2 mouse plug to the mouse port  
3) Power on the computer.  
The wiring of the parallel plug is described below.  
Connect pins 2-5-6-8-11-13-15-18-19-20-21-22-23 to Shield GND (PS/2 mouse plug pin3).  
Connect pins 3-4-7-9-10-12 to VC5 (PS/2 mouse plug pin4) with 4.7KW each.  
CAUTION  
The plug described above must be used for servicing purpose only.  
Do not use it for other than the above purpose and ensure that it remains confidential.  
Using the plug enables the user to skip the previous password and disable the password.  
4-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 Self Diagnosis Test  
1. Floppy disk is included for the self-diagnostic tests that should be performed before using this product.  
2. Connect External Floppy Disk Drive (FDD) to USB port for diagnosis test.  
Important notice  
System password  
This product has a password function. If this function is turned on, the self-diagnostics tests will not work.  
You will need ask the user for the password before performing the self-diagnostics.  
5.1. Outline of Self Diagnostic Tests  
Insert the diagnostics floppy disk  
Starting up the setup utility  
Turn on the power.  
When "Panasonic Press F2 to enter setup" appears  
on the screen, press F2.  
Press " " to select [ Exit ]  
Press " " to select [ Get default value ]  
Press Enter.  
Return the setup  
contents to default  
Choose Yes for "Load default Configuration now?"  
Select "Save Values & Exit" and press Enter.  
Choose Yes for "Save Configuration changes and exit now?"  
and press Enter.  
Menu Screen  
Choose test from  
the menu screen  
to start the test.  
1. DIAG on FD  
2. LAN test  
3. Modem test  
4. Wireless LAN test (Wireless LAN Model only)  
5. CD test  
Q. Quit  
Caution:  
After completing repairs, be sure  
to carry out the Automatic test  
and Peripheraltest.  
<Automatic test>  
<Peripheral test>  
<Test selection>  
Tests selected (O) from the test The parallel devices can be tested. Specifc tests required can  
item list will be performed in  
succession.  
be freely selected and  
performed from the test item  
list.  
2. LAN test  
3. Modem test  
1. DIAG on FD  
4. Wireless LAN test  
(Wireless LAN Model only)  
5. CD test  
Be sure to carry out the Selection  
test only when necessary.  
Problems in the unit are located and divided according  
to error messages that occur during testing.  
5-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.1.1. List of main test items  
The selection item displays the items selected under Automatic test. If you select Automatic test, these test items  
will be performed automatically. You can use Selection test to choose items from the menu screen that you want  
to have tested.  
These items are shown below.  
Test classification  
Contents  
Test items shown on the screen  
SPEAKER TEST  
Select  
1
Speaker test  
2
VESA MODE TEST  
A20 GATE TEST  
VESA mode test  
Address A20 line  
CPU  
3
(CPU related)  
4
CACHE ON/OFF TEST  
NPU OPERAND TEST  
RAM STANDARD TEST  
DMA PAGE REG TEST  
DMA REGISTER TEST  
DMAC TRANSFER TEST  
PIC HALT INSTRUCTION TEST  
PIC REGISTER TEST  
RTC CMOS RAM TEST  
RTC TEST  
Cache memory on/off test  
Floating point processor function test  
Memory standard test  
DMA page register test  
DAM register test  
5
RAM (Memory related)  
CONTROL  
(Control ICs on the main  
board, etc.)  
6
7
8
9
DAM transfer test  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
Interrupt controller halt instruction test  
Interrupt controller register test  
Real time clock CMOS test  
Real time clock test  
PIT CH0 TEST  
interrupt timer CH0  
PIT CH1 TEST  
interrupt timer CH1  
PIT CH2 TEST  
interrupt timer CH2  
IO  
KEYBOARD REG TEST  
PS/2 MOUSE REG  
SERIAL WRAP TEST  
SERIAL ALL INTERNAL TEST  
PARALLEL REGISTER R/W  
PCIC ALL TEST  
Keyboard test  
(Input-output)  
Mouse registration test  
Serial loop back (jig required)  
Serial port interior test  
Parallel register R/W test  
PCIC test  
COMMUNICATION  
AUX  
(Auxiliary functions)  
Card Bus Reg  
Card Bus register test  
USB register test  
USB Reg  
VIDEO  
(Display related)  
VGA ALL TEST  
VGA test  
SVGA RAM TEST  
SVGA RAM test  
DISK  
(FDD, HDD)  
FD WT/RD/WP TEST  
HDD ALL TEST  
FD WT, RD WP test  
Only HDD lead test selected  
ECP register R/W test  
EPP register R/W test  
Extension CMOS R/W test  
UNIQUE  
(Individual functions)  
ECP REGISTER R/W  
EPP REGISTER R/W  
EXT. CMOS R/W TEST  
Test function settings  
Test condition save/play  
Test automatic execute  
Error display (Paging style)  
Following file command  
Test executed on run settings by selecting command  
Select displayed items Error, Log, Option  
5.2. Automatic Test  
Test execution  
From the menu screen shown below For Celeron models Select and press Enter for DIAG on FD  
1. DIAG on FD  
2. LAN test  
3. Modem test  
4. Wireless LAN test (Wireless LAN Model only)  
5. CD testQ. Quit  
menu screen  
5-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Speaker test, VESA test  
The speaker test involves listening to music and choosing OK or Not okay. The VESA test involves looking at  
the display to see if it is satisfactory then choosing OK or Not okay.  
Serial loop back test  
The Automatic test’s initial settings are set so that the serial loop back test will be executed. Connect the serial  
loop back jig and then perform the test.  
(This test is not executed on default mode)  
Diagnostics result  
If no errors occur. The screen shows the word "Pass" in large letters.  
If errors occur. The test is stopped when an error occurs and the error message is displayed.  
For explanations of error messages, see Error Messages and Problem Categories (section 5.5).  
Quitting the test  
At the screen shown below, simultaneously press the ALT and X keys.  
Input screen  
5.3. Peripheral Test  
Test execution  
From the menu screen shown below, be sure to choose the following items and press Enter.  
1. DIAG on FD  
2. LAN test  
3. Modem Test  
4. Wireless LAN test (Wireless LAN Model only)  
5. CD test  
Q. Quit  
menu screen  
2. LAN Test  
This test checks for internal LAN device. Choose LAN test and press Enter.  
3. Modem Test  
4. Wireless LAN Test  
5. CD Test  
5-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.4. Test Selection  
Starting up the input menu  
1. From the menu screen shown below, choose Quit and press Enter.  
1. DIAG on FD  
2. LAN test  
3. Modem test  
4. Wireless LAN test (Wireless LAN Model only)  
5. CD testQ. Quit  
menu screen  
2. When A: \DIAG appears, input "JDG_295, XEX" and press Enter.  
3. The input screen shown below will appear.  
To choose menu items, hold down "ALT" and press the selection key.  
Example:  
"ALT" + F brings up the File menu.  
Input screen  
Order of test flow selection  
Input screen startup  
1. Reading the test conditions settings file  
Press "ALT" and "F".  
Press "L".  
If the test condition settings  
file is not read, this means  
the test program is not running correctly  
.
Press "ALT" and "O".  
Press Enter.  
2. setting the test items  
[ Saving selected test items ]  
If you change the file name when  
saving the file in step , you can  
create test condition settings for  
custom test items.  
Press "ALT" and "S".  
Press "S".  
Choose the test item and press Enter.  
Choose the test whose settings are-  
to be changed, press "A" for Additional-  
and "R" for Erase.  
Example:  
CF-29.  
TEST1.  
* * *  
All initial VAlues are "0" so set  
tests other than the necessary ones to "1".  
Press "O" twice to return the menu screen.  
* * *  
To save the selected list, press "ALT" and "F" at the file menu.  
Starting the test  
Press "ALT" and "R".  
Press "R".  
This will start the test.  
End of test  
5-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.5. Error Messages and Troubleshooting  
The table below explains the parts that may be faulty or damaged should an error message occur while performing the  
various test items of the self diagnostics program.  
Test classification  
CPU  
(CPU related)  
Screen display test items  
A20 GATE TEST  
CACHE ON/OFF  
NPU OPERAND TEST  
RAM STANDARD  
DMA PAGE REG TEST  
DMA REGISTER TEST  
DMAC Transfer TEST  
PIC HALT INSTRUCTION TEST  
PIC REGISTER TEST  
RTC CMOS RAM TEST  
Contents  
Address 20 line  
Cache memory on/off  
Floating point processor function  
Memory standard  
DMA page register  
DAM register  
DAM transfer test  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
RAM (Memory related)  
CONTROL  
(Control ICs on the  
main board, etc.)  
Interrupt controller  
Interrupt controller  
Real time clock CMOS  
SPEAKER TEST  
PIT CH0 TEST  
PIT CH1 TEST  
PIT CH2 TEST  
KEYBOARD REG TEST  
PS/2 MOUSE REG  
SERIAL WRAP TEST  
SERIAL ALL INTERNAL TEST  
PARALLEL REGISTER R/W  
PCIC ALL TEST  
Speaker  
Interrupt timer CH0  
Interrupt timer CH1  
Interrupt timer CH2  
Keyboard  
16 IO  
17 (Input-output)  
18 COMMUNICATION  
Mouse  
Serial loop back (jig required)  
Serial port  
Parallel register  
PCIC  
19  
20  
AUX  
21  
Card Bus REG  
USB REG  
Card Bus port  
USB port  
(Auxiliary functions)  
VGA ALL TEST  
VGA  
22 VIDEO  
SVGA RAM TEST  
VESA MODE TEST  
FD WT/RD/WP TEST  
HDD ALL TEST  
ECP REGISTER R/W  
EPP REGISTER R/W  
EXT. CMOS R/W TEST  
SVGA RAM  
VESA mode  
FD write/read/write protection  
Only HDD lead selected  
Parallel port  
23 (Display related)  
24  
25 DISK  
26 (FDD, HDD)  
27 UNIQUE  
28 (Individual functions)  
29  
Parallel port  
Extension CMOS R/W test  
5-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Wiring Connection Diagram  
SERIAL PORT  
PARALLEL PORT  
EXTERNAL DISPLAY PORT  
CN704  
CN703  
CN700  
CN702  
IO PCB  
INVERTER PCB  
CN1  
CN2  
BACK LIGHT  
MDC MODEM  
MODEM  
PORT  
LCD  
J2  
J1  
ANTENNA  
PCB  
CN1  
KEYBOARD  
USB  
PORT  
CN950  
(FRONT SIDE)  
MIC  
PORT-REPLICATOR  
CN952  
(REVERSE SIDE)  
USB  
PORT  
HEADPHON  
DC-IN  
KBD PCB  
CN13  
JK2  
JK3  
CN55  
JK1  
CN930  
CN933  
ANTENNA  
PCB  
CN10  
CN15  
CN9  
CN6  
CN932  
MAINP PCB  
CN32  
CN1  
CN2  
EXT ANT.  
PCB  
J5  
J6  
CN30  
W-LAN MODULE  
J1  
CN51  
CN8  
CN2  
CN48  
CN1  
SD PCB  
CN56  
CN4  
CN800  
CN803  
CN801  
CN12  
CN47  
TP PCB  
TOUCH PAD  
LAN PORT  
CN980  
RTC  
BATTERY  
MAIN  
BUTTERY  
SPEAKER  
LED PCB  
HDD  
PCMCIA  
6-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Disassembly/Reassembly  
Note:  
Power off the computer. Do not shut down to the Suspend or hibernation mode.  
Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.  
7.1. Disassembly Instructions  
1. Open the Battery Cover.  
7.1.1.  
Preparation  
2. Remove the Battery Pack.  
3. Open the HDD Cover.  
4. Remove the HDD Pack.  
5. Open the FDD Cover.  
6. Remove the FDD Pack.  
Use the MP Eject Lever.  
Before disassembling, be sure to make the following prepara-  
tions.  
• Shut down Windows and turn off the power.  
• Disconnect the AC adaptor.  
• Remove the optional DIMM memory card and PCMCIA card  
if they are connected.  
• Remove other devices if they are connected.  
Attention:  
7.1.3.  
Removing the HDD  
• Please execute writing BIOS ID when you exchange the  
Main Board.  
• You cannot reuse the Conductive Clothes and the heat dissi-  
pating parts such as Sheet and Rubber. Use new parts.  
HDD U Case Ass’y  
<A>  
HDD FPC  
HDD  
7.1.2.  
Removing the Battery Pack, HDD  
Pack and FDD Pack  
Heater Sheet  
Sheet  
Sheet  
HDD  
Damper  
Ass’y  
<A>  
Tab  
Heater  
HDD Case  
Ass’y  
MP  
Cover  
Battery  
Cover  
Tab  
1. Remove the four Screws<A>.  
2. Release the two Tabs, and remove the HDD U Case  
Ass’y and the HDD L Case Ass’y.  
3. Remove the HDD Damper Ass’y.  
4. Remove the two Sheets.  
5. Remove the Heater and the Heater Sheet.  
6. Remove the HDD FPC.  
HDD Cover  
Screws <A>: DFHE5025XA  
FDD Pack  
Battery Pack  
MP RELEASE  
HDD Pack  
Figure 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-1  
7.1.4.  
Removing the KB Cover, Hinge 7.1.5.  
Cover L, Hinge Cover R and Key-  
board  
Remove the KB Cable Cover,  
Keyboard and PCMCIA Protector  
<F>  
KB Cable Cover  
<F>  
<F>  
<F>  
<B>  
<F>  
<D>  
Hinge Cover L  
<D>  
<B>  
<C>  
<C>  
<B>  
<C>  
<D>  
<D>  
<B>  
<C>  
<G>  
PCMCIA  
Protector  
<G>  
<G>  
KB Cover  
to Connector  
(CN933)  
<G>  
<G>  
to Connector  
(CN932)  
Hinge Cover R  
<G>  
Keyboard  
Keyboard  
Figure 3  
1. Remove the four Screws<B>, and remove the KB Cover.  
2. Remove the four Screws<C> and the four Screws<D>,  
and remove Hinge Cover L,R.  
Connector  
(CN933)  
3. Remove the Keyboard.  
Connector  
(CN932)  
Screws <B>: DRQT26+D4FZL  
Screws <C>: DFHE5054XA  
Screws <D>: DFHE5054XA  
Figure 4  
1. Remove the five Screws<F>, and remove the KB Cable  
Cover.  
2. Disconnect the two Cables from two Connectors (CN932,  
CN933)  
3. Remove the six Screws<G>, and remove the PCMCIA  
Protector.  
Screws <F>: DRHM0002ZA  
Screws <G>: DRQT2+I35FKL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-2  
7.1.6.  
Removing the KBD PCB, MDC 7.1.7.  
Modem and LCD Cable/MIC Frame  
Removing the DIMM Cover and  
Bottom Cover  
Connector J1  
(reverse side)  
<J>  
<J>  
Connector CN950  
(front side)  
<I>  
<J>  
<J>  
<I>  
MDC  
Modem  
Connector CN952  
(reverse side)  
<H>  
<H>  
DIMM Cover  
Connector J2  
(reverse side)  
Connector CN930  
(reverse side)  
DIMM Radiation  
sheet  
KBD PCB  
<L>  
to Connector  
(CN950)  
<K>  
<K>  
<L>  
to Connector  
(CN952)  
<L>  
<K>  
<L>  
LCD Cable/  
MIC Frame  
<K>  
<K>  
<L>  
<L>  
<L>  
<K>  
<K>  
<K>  
<L>  
Bottom Cover  
to Connector  
(CN12)  
Connector CN12  
to Connector  
(J2)  
to Connector  
(CN930)  
Figure 5  
1. Remove the LCD Cable/MIC Frame.  
2. Remove the two Screws. <H>  
3. Disconnect the three Cable from three Connectors  
(CN930, CN950, CN952).  
4. Remove the KB PCB.  
5. Remove the two Screws. <I>  
6. Disconnect the Cable from Connector. (J2)  
7. Remove the MDC Modem.  
Screws <H>: DFHE5025XA  
Screws <I>: DFHE5025XA  
Figure 6  
1. Remove the four Screws<J>, and remove the DIMM  
Cover.  
2. Remove the eight Screws<K> and the eight Screws<L>.  
3. Disconnect the Cable from Connector (CN12).  
Screws <J>: DRQT26+D4FZLT  
Screws <K>: DRQT26+D4FZLT  
Screws <L>: DRSB3+8FKL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-3  
7.1.8.  
Removing the Speaker  
7.1.9.  
Removing the Wireless Module and  
SD PCB  
LCD Lamp Sheet  
<N>  
Coil Cooling Sheet  
<N>  
Heat Pipe Unit  
Bottom  
LAN Heat  
Plate  
<M>  
<M>  
CD Edge Sheet  
MP Eject  
BOUSUI  
Plate  
MINI PCI Protector  
Sheet  
<Q>  
<O>  
<O>  
SD PCB  
MP Eject  
Spring  
<O>  
<O>  
to Connector  
(CN2)  
<Q>  
<P>  
<M>  
<M>  
to Connector  
(CN952)  
<Q>  
Wireless Module  
MP Eject  
Lever  
to Connector  
(CN56)  
Speaker  
Angle  
MP Eject Slide  
Ass’y  
Connector CN2  
Main PCB  
Speaker  
Connector CN???  
Bottom Cover  
Figure 7  
1. Remove the LCD Lamp  
Figure 8  
2. Remove the four Screws<M>, and remove the LAN Heat  
Plate, Speaker Angle and the Speaker.  
3. Remove the two Screws<N>, and remove the Heat Pipe  
Unit Bottom.  
1. Disconnect the Cable from Connector (CN2).  
2. Remove the Wireless Module.  
3. Remove the MINI PCI Protector Sheet and the CD Edge  
Sheet.  
4. Remove the four Screws<O>, and remove the MP Eject  
Lever.  
5. Remove the Screw<P>, and remove the MP Eject  
BOUSUI Plate and MP Eject Slide Ass’y.  
4. Remove the three Screws<Q>.  
5. Disconnect the Cable from Connector (CN56).  
6. Remove the SD PCB.  
Screws <Q>: DFHE5025XA  
Screws <M>:DXQT26+D4NLT  
Screws <N>: DXYN+J6FNL  
Screws <O>: DXYN26+F5NLT  
Screw <P>: DXQT26+D4NLT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-4  
7.1.10. Removing the PAD SW FFC Cover  
7.1.11. Removing Main PCB, EXT Antenna  
PCB, PCMCIA Unit and RTC Battery  
EXT Antenna PCB  
<R>  
<R>  
PAD SW FFC  
Cover  
<T-2>  
Connector  
CN1  
<R>  
<T-2>  
<S>  
Connector CN6  
(reverse side)  
<S>  
<T-1>  
Connector CN9  
(reverse side)  
Connector CN51  
(front side)  
<T-2>  
Power Cable  
Guard  
Main PCB  
<T-2>  
<T-1>  
<W>  
Connector CN54  
(reverse side)  
Connector CN4  
(reverse side)  
Connector CN10  
(front side)  
Connector CN1  
(reverse side)  
PCMCIA Unit  
to Connector  
(EXT Antenna CN1)  
Figure 9  
1. Remove the three Screws<R>, and remove the PAD SW  
FFC Cover.  
to Connector  
(CN9)  
to Connector  
to Connector  
RTC Battery  
to Connector  
(CN4)  
(CN6)  
<U>  
(CN950)  
to Connector  
(CN51)  
<U>  
<V>  
<X>  
Screws <R>: DFHE5054XA  
<V>  
<X>  
<V>  
to Connector  
(CN54)  
to Connector  
(CN10)  
to Connector  
(Main PCB CN1)  
Figure 10  
1. Remove the two Screws<S>.  
2. Remove the two Screws<T-1>.  
3. Remove the two Screws<U>.  
4. Remove the four Screws<V>.  
5. Remove the Screw<W>.  
6. Remove the two Screws<X>.  
7. Disconnect the six Cables from six Connectors.  
(Main PCB: CN1, CN6, CN9, CN10, CN51, CN54)  
(EXT Antenna: CN1)  
8. Remove the EXT Antenna.  
9. Remove the Main PCB.  
10. Disconnect the Cable from Connector (CN4).  
11. Remove the RTC Battery  
12. Remove the four Screws<T-2>, and remove the PCMCIA  
Unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-5  
Screws <S>: DFHM5054XA  
Screws <T-1>:DFHE5025XA  
Screws <T-2>:DFHE5025XA  
Screws <U>: DRQT2+G6FKL  
Screw <V>: DRHM5104ZA  
Screw <W>: DFHE5025ZA  
Screw <X>: DRHM5117ZA  
7.1.13. Removing the TP PCB  
<c>  
Connector CN801  
<c>  
TP PBC  
Connector CN800  
Connector CN803  
7.1.12. Remove the HDD Main FPC  
CN Spacer  
<b>  
HDD Connector  
<b>  
HDD Main  
FPC  
<Y>  
Battery Connector  
<Z>  
Batt HDD  
CN Angle  
to Connector  
(CN801)  
<a>  
<a>  
to Connector  
(CN800)  
to Connector  
(CN803)  
Figure 11  
1. Disconnect the three cables from three Connectors.  
(CN800, CN801, CN803)  
2. Remove the two Screws<c>, and remove the TP PCB.  
Screws <c>: DRHM0002ZA  
7.1.14. Removing the IO PCB  
1. Remove the Screws<Y>, and remove the Batt HDD CN  
IO PCB  
Angle.  
2. Remove the Screw<Z>, the two Screws<a> and the two  
Screws<b>.  
3. Remove the HDD Main FPC.  
<d>  
<d>  
<d>  
<d>  
<d>  
<d>  
Screw <Y>: DFHE5092ZA  
Screw <Z>: DFHE5025ZA  
Screws <a>: DRHM5104ZA  
Screws <b>: DFHE5025XA  
Figure 12  
1. Remove the six Screws<d>, and remove the IO PCB.  
Screws <d>: DFHE5058ZB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-6  
7.1.15. Removing the Palm Top Cover 7.1.16. Removing the Handle and Power  
Sheet, Palm Top Cover, Touch Pad  
Adhesion Seat, Touch Pad, Touch  
Pad SW Knob, LED PCB and SW  
LED PCB  
SW  
<g>  
Handle Base L  
Palm Top Cover Sheet  
<g>  
Power  
SW  
Handle  
Handle Base R  
<e>  
<e>  
<e>  
<e>  
<e>  
Palm Top Cover  
Touch Pad Adhesion Seat  
PW LED Sheet  
Touch Pad  
<f>  
PW LED  
PCB  
LED PCB  
SW LED  
PCB  
Touch Pad SW Knob  
Figure 15  
Touch Pad  
SW Knob In  
1. Remove the two Screws<g>, and remove Handle Base  
L,R.  
2. Remove the Handle.  
3. Remove the Power SW.  
Screws <g>: DRSB4+8FKL  
Figure 14  
1. Remove the Palm Top Cover Sheet.  
2. Remove the five Screws<e>, and remove Palm Top  
Cover.  
3. Remove the Touch Pad Adhesion Seat.  
4. Remove the Touch Pad.  
5. Remove the Touch Pad SW Knob and Touch Pad SW  
Knob In.  
6. Remove the LED PCB.  
7. Remove the PW LED Sheet.  
8. Remove the Screw<f>, and remove the SW LCD PCB.  
Screws <e>: DRHM0002ZA  
Screw <f>: DRHM0002ZA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-7  
7.1.17. Removing LCD Unit  
7.1.18. Removing LCD Rear Cabinet, Hinge  
L and Hinge R  
LCD unit  
<k>  
<j>  
<k>  
<k>  
<i>  
<i>  
<k>  
<k>  
<j>  
<k>  
<k>  
<k>  
<i>  
<i>  
<k>  
<k>  
<k>  
<k>  
<h>  
LCD Latch  
LCD Rear Cabinet  
<l>  
Hinge L  
Hinge R  
<l>  
<h>  
Figure 16  
1. Remove the two Screws<h> and the four Screws<i>, and  
remove the LCD Unit.  
LCD Front Cabinet  
Figure 17  
Screws <h>: DXSB4+12FNLB  
Screws <i>: DXYN4+J8FNL  
1. Remove the two Screws<j> and the twelve Screws<k>,  
and remove the LCD Rear Cabinet.  
2. Remove the LCD Latch.  
3. Remove the two Screws<l>, and remove the Hinge L and  
R.  
Screws <j>: DRSB4+10FKL  
Screws <k>: DRSB26+8HKL  
Screws <l>: DRHM0062ZA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-8  
7.1.19. Removing the Inverter PCB, TS  
PCB and LCD Unit  
Inverter PCB  
TS PCB  
LCD Unit  
LCD Front Cabinet  
Figure 18  
1. Disconnect two Cables from Connectors. (on Inverter  
PCB)  
2. Remove the Inverter PCB.  
3. Disconnect two Cables from Connectors. (on TS PCB)  
4. Remove the TS PCB.  
5. Remove the LCD Unit.  
7.1.20. Removing the Antenna PCB L and  
R
Antenna PCB Cover L  
LCD Rear Cabinet Ass’y  
Antenna PCB L  
<m>  
<m>  
<m>  
<m>  
Antenna PCB R  
Antenna PCB Cover R  
Figure 19  
1. Remove the four Screws<m>.  
2. Remove the Antenna PCB Cover L and R and Antenna  
PCB L and R.  
Screws <m>:DRSB26+8KL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-9  
7.2. Reassembly Instructions  
7.2.1.  
Attention when CF-29 series is repaired  
• Please execute writing BIOS ID when you exchange the Main Board.  
• You cannot reuse the Conductive Clothes and the heat dissipating parts such as Sheet and Rubber. Use new parts.  
7.2.2.  
Setting the Antenna PCB L and R  
LCD Rear Cabinet Ass’y  
Antenna PCB L  
1. Set the Antenna PCB L and R to the LCD Rear Cabinet  
Ass’y.  
2. Fix the Antenna PCB Cover L and R using the four  
Screws. <i>  
Screws <m>:DRSB26+8KL  
<m>  
<m>  
Antenna PCB R  
<m>  
Antenna PCB  
Cover L  
<m>  
Antenna PCB Cover R  
n Arranging the Antenna L and R Cables  
View "A"  
View "A"  
View "A"  
<No good>  
LCD Rear  
Cabinet  
Antenna Cable L  
Antenna Cable R  
Do not press too  
much the  
Waterproof Cap.  
View "B"  
View "B"  
Antenna  
Cable  
View "B"  
Antenna Cable R  
Tape  
Tape  
Tape  
View "C"  
View "C"  
Tape  
Tape  
View "D"  
align  
Pass the Antenna  
Cable through this  
space.  
Cushion  
View "E"  
Cable Clamper  
Waterproof Cushion  
View "E"  
View "D"  
View "C"  
Pass the Antenna Cable  
through this space.  
LCD Rear Cabinet  
Antenna Cable L  
Waterproof  
Cushion  
align  
1~5mm  
1~4mm  
1~5mm  
LCD Rear  
Cabinet  
1~4mm  
Cable Clamper  
Bend  
Tape  
Antenna Cable  
L and R  
Antenna Cable L  
Tape  
Tape  
Antenna Cable R  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-10  
7.2.3.  
Setting the Inverter PCB, TS PCB and LCD Unit  
1. Set the LCD Unit to the LCD Front Cabinet in order.  
2. Attach the Inverter PCB to the LCD Unit and connect the  
two Cables to the two Connectors on the Inverter PCB.  
3. Attach the TS PCB to the LCD Unit in order and connect  
the two Cables to the two Connectors on the TS PCB.  
View "A"  
Safty Working  
TS PCB  
3
4
LCD Unit  
Connectors  
Connectors  
TS PCB  
Inverter PCB  
LCD Unit  
View "A"  
2
1
LCD Front Cabinet  
n Attaching the Touch Screen Panel.  
1. Attach the Touch Screen Panel to the LCD Front Cabinet using the TS Tape.  
Note:  
Use extreme caution when handling the Touch Screen Panel to avoid damage, fingerprints, etc.  
View "A"  
View "A"  
Touch Screen Panel  
TS FPC Spacer  
3 1mm  
0 0.5mm  
TS FPC Spacer  
TS FPC  
TS Tape  
TS FFC Sheet  
View "B"  
View "B"  
LID Magnet  
Forming Unit  
LID Magnet  
Forming Unit  
LCD Front Cabinet  
0~1mm  
LCD Front Panel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-11  
n Arranging the Inverter PCB  
1. Attach the LCD Inverter Case Spacer L to the Inverter PCB.  
2. Attach the Inverter Case L/U to the Inverter Case L.  
Inverter Case U  
LCD Inverter Case  
Spacer L  
View "A"  
Inverter PCB  
View "A"  
LCD Inverter Case  
Spacer L  
1~2mm  
1~2mm  
Align  
Do not pressure to trance circuit.  
Inverter Case L  
3. Attach the LCD Inverter Case Tape and the Inverter Shield to the Inverter Case.  
View "B1"  
View "B2"  
LCD Inverter Case Tape  
View "B1"  
View "B2"  
Inverter Shield  
LCD Inverter Case Tape  
0~1mm  
0~3mm  
Connector  
Inverter Shield  
0~3mm  
0~1mm  
0~2mm  
0~2mm  
Inverter Case  
4. Attach the Inverter Shield Tape to the Inverter Case.  
Inverter Case  
Inverter Shield Tape  
View "C"  
View "C"  
Inverter Shield Tape  
0~1mm  
0~2mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-12  
n Arranging the LCD Back Holder  
1. Attach the two LCD Cable Tapes to the LCD Back Holder.  
Bend 30  
Bend 30  
LCD Back Holder  
0~1mm  
Bend 90  
LCD Cable Tape  
0~1mm  
n Attaching the LCD Damper Front, LCD Side Damper UN/R13 and TS Spacer L13/S13  
1. Attach the LCD Damper Front to the upper part of the LCD Unit.  
2. Attach the LCD Side Damper UN to the left side of the LCD Unit.  
3. Attach the LCD Side Damper R13 to the right side of the LCD Unit.  
4. Attach the TS Spacer L13 and the two TS Spacer S13 to the all sides of the LCD Unit.  
LCD Damper Front  
0~0.5mm  
0~0.5mm  
0~1mm  
0~0.5mm  
0~0.5mm  
0~1mm  
0~1mm  
0~0.5mm  
TS Spacer L13  
0~0.5mm  
LCD Side Damper UN  
LCD Side Damper R13  
TS Spacer S13  
TS Spacer S13  
TS Spacer L13  
0~0.5mm  
0~0.5mm  
0~0.5mm  
LCD Unit  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-13  
n Attaching the LCD Thermal Plate, LCD Hold Plate L and LCD Hold Plate R  
1. Attach the LCD Thermal Plate to the LCD Unit.  
2. Fix the LCD Plate L and LCD Hold Plate R to sides of the LCD Unit using the two Screws<n>.  
Screws <n>: DXYN2+C3FNL  
LCD Unit  
LCD Hold Plate L  
LCD Plate R  
LCD Metal  
Damper  
LCD Metal  
Damper  
0~1mm  
LCD Thermal Plate  
0~1mm  
LCD Metal  
Damper  
LCD Metal  
Damper  
Sheet  
View A  
4~7mm  
<n>  
<n>  
2~3mm  
0~1mm  
0~1mm  
0~1mm  
LCD Lamp Sheet  
LCD Lamp Sheet  
View A  
LCD Plate R  
Sheet  
4~7mm  
Bend  
n Attaching the LCD Back Holder, LCD Back Damper Ass’y and Inverter Damper  
1. Attach the LCD Back Holder to the LCD Unit.  
2. Attach the two LCD Back Damper Ass’y to the LCD Unit and LCD Back Holder.  
3. Attach the two Inverter Damper to the LCD Unit.  
0~0.5mm  
0~0.5mm  
0~1mm  
0~1mm  
LCD Unit  
Inverter  
Damper  
Inverter  
Damper  
View "B"  
0~0.5mm  
LCD Plate R  
View "B"  
LCD Back Holder  
LCD Drop  
Holder R  
LCD Drop  
Holder L  
0~2mm  
0~2mm  
0~2mm  
0~2mm  
LCD Back Damper Ass'y  
LCD Back Damper Ass'y  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-14  
n Attaching the Inverter PCB and TS PCB  
1. Attach the Inverter PCB to the LCD Back Holder of the LCD Unit and connect the two Cables to the two Connectors on the  
Inverter PCB.  
2. Attach the TS PCB to the LCD Back Holder of the LCD Unit and connect the two Cables to the two Connectors on TS PCB.  
Safety Working  
Connector  
Terminal side is up.  
TS PCB  
Connectors  
LCD Cable  
0~2mm  
LCD Back Holder  
Connectors  
Tape  
Tape  
View "B"  
LCD Plate R  
View "C"  
Shape the Lamp Cable straighten  
so that the Lamp Cable is not covered  
on the LCD Plate R or the LCD Back  
Damper Ass'y.  
View "A"  
Tape  
LCD Back  
Damper Ass'y  
Inverter PCB  
LCD Cable Tape  
LCD Inverter  
Case Spacer L  
View "D"  
LCD Conductive  
Sheet  
View "A"  
View "B"  
View "C"  
View "D"  
Cable is up on  
Lamp Cable  
Inverter  
PCB  
LCD Inverter  
Case Spacer L  
LCD Conductive Sheet  
or LCD Cable Tape  
LCD Plate R  
0~2mm  
Connector  
0~5mm  
Lamp  
Cable  
Lamp Cable  
Cables  
Tape  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-15  
n Arranging the Cables  
Safety Working  
View "A"  
0~1mm  
TS FFC Sheet  
8±1mm  
0~1mm  
IC  
Press  
TS PCB  
Kapton Tape  
LCD Plate R  
TS PCB  
Draw out the rest of Cable  
in a direction of the arrow.  
0~1mm  
View "B"  
IC  
TS FFC Sheet  
Inverter Case  
Cable  
View "B"  
View "B"  
View "A"  
Pass the Cable  
through this space.  
Inverter PCB  
Sheet  
Inverter PCB  
Attaching the LCD Cable Tape  
LCD Cable Tape  
View "D"  
View "E"  
View "D"  
View "C"  
Bosses  
Inverter PCB  
Cable  
View "C"  
View "D"  
View "E"  
Cable should be in Bosses.  
The LCD Cable Tape should be  
attatched along the Inverter  
Case and the LCD Back Holder.  
The LCD Cable Tape should be  
attached along the Inverter  
Case and the LCD Back Holder.  
Bosses  
LCD Cable Tape  
LCD Cable Tape  
Cable  
LCD Front  
Cabinet  
Inverter  
Case  
LCD Back  
Holder  
Inverter  
Case  
LCD Back  
Holder  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-16  
7.2.4.  
Setting the LCD Rear Cabinet, Hinge L and Hinge R  
1. Fix the Hinge L and R using the two Screws<e>.  
2. Set the Latch.  
<k-2>  
<j>  
<k-1>  
:No1  
<k-2>  
3. Set the LCD Front Cabinet to the LCD Rear Cabinet.  
4. Fix the LCD Front Cabinet using the two Screws<k-1>.  
No1, No2  
5. Fix the LCD Front Cabinet using the ten Screws<k-2>.  
6. Fix the LCD Front Cabinet using the two Screws<j>.  
<k-2>  
<k-1>  
<k-2>  
<k-2>  
<j>  
:No2  
<k-2>  
<k-2>  
<k-2>  
<k-2>  
Note:  
<k-2>  
Tighten the Screws in the numbered order (No1, No2).  
LCD Latch  
Screws <j>: DRSB4+10FKL  
Screws <k-1>:DRSB26+8HKL  
Screws <k-2>:DRSB26+8HKL  
Screws <l>: DRHM0062ZA  
LCD Rear Cabinet  
<l>  
Hinge L  
Hinge R  
<l>  
Cable  
Safety Working  
Take extreme care not to pinch  
the cable.  
LCD Front Cabinet  
7.2.5.  
Setting the LCD unit  
1. Pass the Cables into the hole of the hole of the  
Top Cabinet.  
LCD unit  
2. Fix the LCD Unit using the two Screws<i-1>.  
3. Fix the LCD Unit using the two Screws<i-2>.  
4. Fix the LCD Unit using the two Screws<h>.  
<i-1>  
<i-1>  
Screws <h>: DXSB4+12FNLB  
Screws <i-1>: DXYN4+J8FNL  
Screws <i-2>: DXYN4+J8FNL  
<i-2>  
<i-2>  
<h>  
Top Cabinet  
Hole  
<h>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-17  
7.2.6.  
Setting the Handle and Power SW  
1. Set the Power SW.  
2. Set the Handle.  
<g>  
Handle Base L  
3. Fix the Handle Base Land R using the two Screws<g>.  
Screws <g>: DRSB4+8FKL  
<g>  
Power  
SW  
Handle  
Handle Base R  
7.2.7.  
Setting the Palm Top Cover Sheet, Palm Top Cover, Touch Pad Adhesion Seat,  
Touch Pad, Touch Pad SW Knob, LED PCB and SW LED PCB  
1. Set the SW LED PCB.  
2. Attach the Power LED Packing Sheet to the LED Spacer  
Sheet.  
Palm Top Cover Sheet  
3. Attach the LEDX6 Spacer Sheet on the SW LED PCB.  
4. Fix the SW LED PCB using the Screw<f>.  
5. Attach the PW LED Sheet.  
6. Pass the Cable of LED PCB through the hole 1 on the  
Top Cabinet, then set the LED PCB.  
7. Attach the LED Spacer Sheet on the LED PCB  
8. Set the Touch Pad SW Knob In and Touch Pad SW Knob.  
9. Attach the TP Bottom Tape to the Touch Pad.  
10. Pass the Cables of the Touch Pad through the hole 2 on  
the Top Cabinet, set the Touch Pad.  
<e>  
:No2  
<e>  
:No1  
<e>  
:No3  
<e>  
:No5  
<e>  
:No4  
Palm Top Cover  
PW LED Sheet  
Touch Pad  
Adhesion Seat  
<f>  
LED Spacer  
Sheet  
11. Attach the Touch Pad Adhesion Seat.  
12. Fix the Palm Top Cover using the five Screws<e>. No1 to  
No5  
Power LED  
Packing Sheet  
Touch Pad  
Touch Pad  
SW LED PCB  
SW Knob  
LEDX6  
Spacer  
Sheet  
13. Attach the Palm Top Cover Sheet.  
Cable  
LED PCB  
Cable  
TP Bottom  
Tape  
Note:  
Tape CPU  
Tighten the Screws in the numbered order (No1 to No5).  
Power SW  
PCB Cushion  
FCC CN  
Stopper  
Touch Pad  
SW Knob In  
Screws <e>: DRHM0002ZA  
Screw <f>: DRHM0002ZA  
Hole 1  
Top Cabinet  
Hole 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-18  
n Arranging the SW LED PCB  
1. Attach the Power SW PCB Cushion and the two Tape CPU to the PW LED PCB.  
Power SW PCB Cushion  
1±1mm  
0.5±0.5mm  
0~0.5mm  
Tape CPU  
0~0.5mm  
1±1mm  
2±2mm  
PW LED PCB  
PW LED PCB  
Foil side  
Component side  
Bend  
2. Bend the PW LED PCB as shown.  
1
Safety Working  
180  
White line  
Bend  
180  
2
PW LED PCB  
PW LED PCB  
White line  
3. Connect the Power SW Cable to the Connector on the PW LED PCB.  
Safety Working  
Power SW Cable  
Connector  
PW LED PCB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-19  
n Arranging the Power SW Cable  
Safety Working  
Set the Cable along a  
connector side, not to prop.  
Top Cabinet  
View "A"  
Do not put up the Cable on the Cabinet.  
SW LED PCB  
Tape  
View "A"  
CON Spacer  
Tape  
0~2mm  
0~0.5mm  
Power SW Cable  
0~2mm  
3~4mm  
CON Spacer  
Power SW Cable  
View "B"  
0~2mm  
View "B"  
Power SW Cable  
0 0.5mm  
Top Cabinet  
CON Spacer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-20  
7.2.8.  
Setting the IO PCB  
1. Fix the IO PCB using the six Screws<d>. No1 to No6  
Rear I/O FPC Cover Sheet  
Note:  
Tighten the Screws in the numbered order (No1 to No6).  
Screws <d>: DFHE5058ZB  
IO PCB  
<d>  
:No1  
<d>  
:No3  
<d>  
:No4  
<d>  
:No5  
<d>  
:No6  
<d>  
:No2  
n Arrange the IO FPC  
Safety Working  
Attention when bending the FPC  
1. Inside of bending should be from R0.5mm to  
R1mm.  
2. Do not mistake the direction of bending.  
3. For bending point, it should be within 0.5mm from  
the white line unless there is a regulation.  
View "A"  
View "B"  
<No good>  
IO FPC  
IO FPC  
R1.5~2.5mm  
R0.5~1.0mm  
LID SW  
Cushion  
0 0.3mm  
2~3mm  
Bend  
180  
Bend  
90  
IO FPC  
White line  
White line  
Bend  
90  
White line  
LID SW Cushion  
White line  
0~0.5mm  
View "A"  
0 0.5mm  
Bend  
180  
1~1.5mm  
White line  
Bend  
90  
White line  
View "B"  
0 0.5mm  
LID SW Cushion  
Bend  
90  
Front side  
Back side  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-21  
n Setting the IO FPC  
IO FPC  
FCC CN Stopper  
IO PCB  
n Setting the IO PCB and attaching the Rear I/O FPC Cover  
Sheet  
IO PCB  
Rear I/O FPC  
Cover Sheet  
LID SW  
Cushion  
IO FPC  
Rib  
IO PCB  
Rib  
Slot  
Do not put up the  
IO FPC on the Rib.  
Do not put up the Rear  
I/O FPC Cover Sheet  
on the Rib.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-22  
7.2.9.  
Setting the TP PCB  
1. Fix the TP PCB using the two Screws<c>. No1, No2  
2. Connect the three Cables to the three Connectors on the  
TP PCB (CN800, CN801, CN803).  
<c>  
:No1  
<c>  
Connector CN801  
:No2  
Note:  
TP PCB  
Tighten the Screws in the numbered order (No1, No2).  
Connector CN800  
Connector CN803  
Screws <c>: DRHM0002ZA  
to Connector  
(CN801)  
to Connector  
(CN800)  
to Connector  
(CN803)  
n Attaching the Cable Sheet, Insulation Sheet and the Sheet  
1. Attach the Sheet and Insulation Sheet on the TP PCB.  
2. Attach the Cable Sheet on the Touch Pad FPC.  
Top Cabinet  
View "A"  
Sheet  
Top Cabinet  
LED FFC  
0~1mm  
Sheet  
TP PCB  
View "A"  
0~0.5mm  
0~1mm  
TP PCB  
Insulation Sheet  
1~2mm  
Connectors  
Touch Pad FPC  
Cable Sheet  
LED FFC  
0~2mm  
Rib of the Top Cabinet  
0~1mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-23  
7.2.10. Setting the HDD Main FPC  
1. Fix the HDD Main FPC to the Batt HDD CN Angle using  
the two Screws<a> and the two Screws<b>  
2. Fix the CN Spacer to the Batt HDD CN Angle using the  
Screw<Z>.  
EMP Sheet Batt HDD FPC  
CN Spacer  
FPC Conduction  
Tape  
<b>  
3. Fix the Batt HDD CN Angle using the Screw<Y>.  
Insulation Sheet  
<b>  
Screw <Y>: DFHE5092ZA  
Screw <Z>: DFHE5025ZA  
Screws <a>: DRHM5104ZA  
Screws <b>: DFHE5025XA  
HDD Main  
FPC  
<Y>  
HDD Connector  
Battery Connector  
<Z>  
<a>  
Batt HDD  
CN Angle  
<a>  
MINI PCI  
Spacer  
Battery Angle Sheet  
View "A"  
View "A"  
Batt HDD  
CN Angle  
Set the Batt HDD CN Angle  
sliding to the left so that the  
HDD Main FPC does not  
attach to the Rib of the Top  
Cabinet.  
Press  
Rib  
n Arranging the HDD Main FPC  
HDD Main FPC  
HD FPC Tape  
1±1mm  
White line  
White line  
Bend  
90  
Bend  
180  
HDD Main FPC  
1±1mm  
Sheet  
White line  
0~1mm  
White line  
Cable Sheet  
Sheet  
Cable Sheet  
0±0.5mm  
0~2mm  
Bend  
180  
Bend  
180  
White line  
Bend  
90  
Component side  
Foil side  
Attention when bending the FPC  
1. Inside of bending should be from R0.5mm to R1mm.  
2. Do not mistake the direction of bending.  
<No good>  
R0.5~1.0mm  
2~3mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-24  
7.2.11. Setting the Main PCB, EXT Antenna PCB, PCMCIA Unit and RTC Battery  
1. Connect the Cable the Connector (CN4) on the Main  
EXT Antenna PCB  
PCB, and Attach the RTC Battery.  
2. Fix the PCMCIA to the Main PCB using the Screws<T-2>.  
No1 to No4  
3. Connect the six Cables to the six Connectors.  
(Main PCB: CN6, CN9, CN10, CN51, CN54)  
(EXT Antenna PCB: CN1)  
4. Fix the Main PCB using the three Screws<V>. No5 to  
No7  
<T-2>  
:No1  
Connector  
CN1  
<T-2>  
:No4  
Connector CN6  
<S>  
<T-1>  
:No9  
(reverse side)  
:No10  
<S>  
:No11  
Connector CN51  
(front side)  
Connector CN9  
(reverse side)  
<T-2>  
:No3  
Main PCB  
5. Fix the Main PCB using the two Screws<T-1>. No8, No9  
6. Fix the Main PCB using the two Screws<S>. No10, No11  
7. Fix the Main PCB using the Screw<W>. No12  
8. Fix the Main PCB using the two Screw<X>. No13, No14  
9. Fix the EXT Antenna PCB using the two Screws<U>.  
No15, No16  
<T-2>  
:No2  
<T-1>  
:No8  
<W>  
:No12  
Connector CN54  
(reverse side)  
Connector CN10  
(front side)  
Connector CN4  
(reverse side)  
Connector CN1  
(reverse side)  
PCMCIA Unit  
Note:  
Tighten the Screws in the numbered order (No1 to No16).  
Screws <S>: DFHM5054XA  
Screws <T-1>:DFHE5025XA  
Screws <T-2>:DFHE5025XA  
Screws <U>: DRQT2+G6FKL  
Screws <V>: DRHM5104ZA  
Screw <W>: DFHE5025ZA  
Screw <X>: DRHM5117ZA  
to Connector  
to Connector  
(EXT Antenna CN1)  
(CN4)  
to Connector  
(CN9)  
<U>  
to Connector  
RTC Battery  
:No16  
<U>  
(CN6)  
:No15  
to Connector  
(CN950)  
to Connector  
(CN51)  
<V>  
:No7  
<X>  
<V>  
:No5  
:No13  
<X>  
:No14  
<V>  
:No6  
to Connector  
(CN54)  
to Connector  
(CN10)  
to Connector  
(Main PCB CN1)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-25  
n Attaching the SD INS Sheet, Coil Cooling Sheet and MINI PCI Spacers  
MINI PCI Spacers  
Coil Cooling Sheet  
IC  
IC  
SD INS Sheet  
n Setting the LAN Cable and Modem Cable  
1. Set the LAN Cable and the Modem Cable to the DC/USB Cover Frame.  
2. Set the Clampers to the LAN Cable and the Modem Cable.  
3. Fix the DC/USB Cover Plate, the DC USB Cover Hook and the DC/USB Cover Frame using the two Screws<o>. No1, No2  
Note:  
Tighten the Screws in the numbered order (No1, No2).  
Screw <o>: DRHM5025YA  
Safety Working  
DC/USB Cover Frame  
Modem Cable  
Clampers  
LAN Cable  
The LAN Cable should be tied  
by the Clamper in its bottom.  
Rib  
DC/USB Cover Frame  
DC USB Cover Hook  
<o>  
:No1  
Ribs  
<o>  
:No2  
Safety Working  
DC/USB Cover Plate  
Do not put up the DC/USB Cover Plate on  
the Rib of the Top Cabinet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-26  
n Setting the Main PCB  
1. Set the Main PCB to the Top Cabinet in order.  
View "A"  
View "C"  
Confirm that the Pin of the Top  
Cabinet of the hole of the Main PCB.  
Safety Working  
Main PCB  
Pull out the LAN Cable  
Tip of the Screw  
Tip of the Screw  
Safety Working  
Confirm that the Pin of  
the Top Cabinet of the  
hole of the Main PCB.  
Pass the Power SW Cable through  
the upper side of Cable.  
1
Hole  
MP CN Spacer Hole  
Power SW Cable  
2
View "B"  
Batt HDD CN Angle  
View "B"  
Cable  
View "A"  
Confirm that the Boss of the Top Cabinet of  
the hole of the Batt HDD CN Angle.  
Cable  
View "C"  
Safety Working  
LAN Cable  
Clamper  
Slot  
Clamper  
Slot  
Confirm that the tying point of the  
LAN Cable's Clamper is in the  
opposite direction to Main PCB.  
Pass the LAN Cable  
through this Slot.  
Tying point  
LAN Cable  
Main PCB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-27  
n Arranging the Cables and attaching the Sheets, the Tape, the Space PWB Hold MP and the Insulation Sheet  
1. Connect the five Cables to the five Connectors.  
(Main PCB: CN6, CN9, CN10, CN51, CN54)  
2. Attach the three Sheets, the Tape, the Space PWB Hold MP and the Insulation Sheet.  
Connect the Connector CN51.  
Attach the Sheet in condition that  
the IO FPC is slid to the side of  
the Connector CN10.  
Connect the Connector CN54.  
View "A"  
Sheet  
View "A"  
Safety Working  
IO FPC  
Sheet  
View "B"  
Wireless Module Holder  
View "D"  
Do not put up the Cable  
on the Wireless Module  
Holder.  
Cable  
View "C"  
Connect the  
Connector CN10.  
Tape  
Pass the Cable through  
the right side of the  
Connector not to put up it  
on the Connector.  
Space PWB  
Hold MP  
Sheet  
Connector CN51  
Insulation Sheet  
View "D"  
View "C"  
View "B"  
1~2mm  
IC  
Power SW Cable  
Tape  
0~1mm  
CON Spacer  
TP PCB  
Sheet  
0~1mm  
Cable  
Cable  
Space PWB  
Hold MP  
0~1mm  
1~2mm  
Insulation Sheet  
0~0.5mm  
Sheet  
0~1mm  
3~4mm  
0~1mm  
0.5~1.5mm  
Connect the Connector CN9.  
Connect the Connector CN6.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-28  
n Setting the RTC Battery  
1. Connect the Cable to the Connector CN4 on the Main PCB.  
2. Attach the RTC Battery to the Main PCB.  
Safety Working  
Connect the Connector CN4.  
0~1mm  
1~2mm  
0~1mm  
1~2mm  
1~2mm  
Main PCB  
Gasket  
RTC Battery  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-29  
7.2.12. Setting the PAD SW FFC Cover  
1. Set the Power Cable Guard.  
<R>  
:No1  
2. Fix the PAD SW FFC Cover using the three Screws<R>.  
No1 to No3  
<R>  
:No2  
PAD SW FFC  
Cover  
Note:  
<R>  
:No3  
Tighten the Screws in the numbered order (No1 to No3).  
Screws <R>: DFHE5054XA  
Power Cable  
Guard  
n Arranging the Power SW Cable  
Main PCB  
Power Cable  
Guard  
Power SW Cable  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-30  
7.2.13. Setting the Wireless Module and SD PCB  
1. Attach the Memory Heat Plate to the Main PCB.  
2. Set the Wireless Module to the Main PCB.  
3. Attach the MINI PCI Protector Sheet to the  
Wireless Module.  
CD Edge Sheet  
MINI PCI Spacer U2  
4. Connect the Cable to the Connector (CN2) on the EXT  
Antenna PCB.  
MINI PCI Protector  
Sheet  
MINI PCI Spacer U2  
5. Attach the CD Edge Sheet and the two MINI PCI Spacers  
U2.  
6. Fix the SD PCB using the three Screws<Q>. No1 to No3  
7. Connect the Cable to the Connector on the Main PCB.  
8. Attach the two Heat Dissipation Rubbers to the Main PCB.  
SD PCB  
<Q>  
:No3  
<Q>  
:No2  
to Connector  
(CN2)  
to Connector  
(CN952)  
Memory Heat  
Plate  
Wireless Module  
<Q>  
:No1  
Note:  
Heat Dissipation  
Rubbers  
Tighten the Screws in the numbered order (No1 to No3).  
Connector CN2  
Screws <Q>: DFHE5025XA  
EXT Antenna  
PCB  
Connector  
Main PCB  
Safety Working  
Confirm that the Insulation Sheet is attached  
between the SD PCB and the Main PCB.  
n Attach the MINI PCI Protector Sheet, the CD Edge Sheet, the MINI PCI Spacers U2 and the Heat Dissipation Rubbers  
View "A"  
MINI PCI Spacer U2  
MINI PCI Spacer U2  
View "C"  
MINI PCI Protector Sheet  
Main PCB  
View "D"  
0~1mm  
CD Edge  
Sheet  
Heat Dissipation  
Rubber  
View "B"  
View "B"  
Wireless Module  
View "A"  
MINI PCI Protector  
Sheet  
Heat Dissipation  
Rubber  
MINI PCI  
Protector Sheet  
View "E"  
4 1mm  
View "D"  
View "E"  
View "C"  
Safety Working  
Safety Working  
Safety Working  
MINI PCI  
Spacer U2  
MINI PCI  
Spacer U2  
0~1mm  
0~0.5mm  
Heat Dissipation Rubber  
Heat Dissipation Rubber  
1.5~5.5mm  
0~0.5mm  
0~0.5mm  
0~0.5mm  
0.5~2.5mm  
IC  
IC  
CD Edge  
Sheet  
2~3mm  
2~3mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-31  
n Attaching the Memory Heat Plate  
Memory Heat Plate  
IC  
0~1mm  
0~1mm  
7.2.14. Setting the Speaker  
1. Set the MP Eject Slide Ass’y to the Bottom Cover.  
LCD Lamp Sheet  
Coil Cooling Sheet  
2. Fix the MP Eject BOUSUI Plate using the Screw<P>.  
3. Fix the MP Eject Lever using the four Screws<O>.  
4. Fix the Heat Pipe Unit Bottom using the two Screws<N>.  
5. Fix the three Speaker Angles to the Speaker using the  
three Adhesive Tapes.  
6. Attach the Speaker Spacer to the Speaker.  
7. Attach the CPU Heatsink Rubber and the LAN Heat Plate  
Spacer to the LAN Heat Plate.  
Radiation  
Rubber  
<M>  
<M>  
LAN Heat  
Plate  
<N>  
<N>  
Heat Pipe Unit  
Bottom  
CPU Heatsink  
Rubber  
LAN Heat  
Plate Spacer  
8. Fix the Speaker and the LAN Heat Plate using the four  
Screws<M>.  
9. Attach the Radiation Rubber, Coil Cooling Sheet and the  
LCD Lamp Sheet to the LAN Heat Plate.  
MP Eject  
BOUSUI  
Plate  
<M>  
<M>  
<O>  
<O>  
<O>  
<O>  
MP Eject  
Spring  
<P>  
Screws <M>:DXQT26+D4NLT  
Screws <N>: DXYN+J6FNL  
Screws <O>: DXYN26+F5NLT  
Screw <P>: DXQT26+D4NLT  
MP Eject  
Lever  
Speaker  
Angle  
Adhesive  
Tape  
MP Eject Slide Ass’y  
DIMM Stopper  
Sheet  
Speaker  
Speaker  
Spacer  
Bottom Cover  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-32  
7.2.15. Setting the DIMM Cover and Bottom Cover  
1. Set the Bottom Cover.  
2. Connect the Cable to the Connector (CN12) on the Main  
<J>  
:No17  
<J>  
:No20  
PCB.  
<J>  
:No19  
3. Fix the Bottom Cover using the eight Screws<L>. No1 to  
<J>  
:No18  
No8  
DIMM Cover  
4. Fix the Bottom Cover using the eight Screws<K>. No9 to  
No16  
DIMM Radiation  
Sheet  
5. Attach the DIMM Radiation Sheet.  
<L>  
:No5  
<K>  
:No10  
6. Fix the DIMM Cover using the four Screws<J>. No17 to  
No20  
<K>  
<L>  
:No7  
:No11  
<K>  
:No9  
<L>  
:No6  
<L>  
:No2  
<K>  
Note:  
:No12  
<K>  
Tighten the Screws in the numbered order (No1 to No20).  
<L>  
:No16  
:No8  
<L>  
:No3  
<L>  
:No1  
Screws <J>: DRQT26+D4FZLT  
Screws <K>: DRQT26+D4FZLT  
Screws <L>: DRSB3+8FKL  
<K>  
:No15  
<K>  
to Connector  
(CN12)  
:No13  
<K>  
:No14  
<L>  
:No4  
Bottom Cover  
Lock Plate  
Main PCB  
Connector CN12  
n Arranging the DIMM Cover and the DIMM Radiation Sheet  
DIMM Stopper Spacer  
View "A"  
DIMM Stopper  
DIMM Cover  
View "B"  
DIMM Radiation Sheet  
DIMM Cover Spacer  
Sheet  
View "A"  
View "B"  
DIMM Cover Spacer  
0~2mm  
0~2mm  
Sheet  
5 2mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-33  
7.2.16. Setting the KBD PCB, MDC Modem and LCD Cable/MIC Frame  
1. Connect the three Cables to the three Connectors  
Connector J1  
(CN930, CN950, CN952) on the KBD PCB.  
2. Fix the KBD PCB using the two Screws<H>. No1, No2  
3. Connect the Cable to the Connector (J2) on the MDC  
Modem.  
(reverse side)  
Connector CN950  
(front side)  
<I>  
<I>  
:No4  
:No3  
<H>  
:No1  
Sheet  
Connector CN952  
(reverse side)  
<H>  
:No2  
4. Attach the Sheet to the MDC Modem.  
MDC  
Modem  
5. Fix the MDC Modem using the two Screws<I>. No3, No4  
6. Attach the LCD Conductive Sheet and the Gasket to the  
LCD Cable/MIC Frame.  
Connector J2  
(reverse side)  
to Connector  
(CN950)  
Gasket  
Connector CN930  
(reverse side)  
KBD PCB  
7. Set the LCD Cable/MIC Frame to the Top Cabinet.  
to Connector  
(CN952)  
Note:  
Tighten the Screws in the numbered order (No1 to No4).  
Top Cabinet  
LCD Conductive  
Sheet  
Screws <H>: DFHE5025XA  
Screws <I>: DFHE5025XA  
LCD Cable/  
MIC Frame  
to Connector  
(J2)  
Place the Cable not to  
pass through this range.  
to Connector  
(CN930)  
n Attaching the Sheet to the MDC Modem  
1. Connect the Cable to the Connector (J2) on the MDC Modem.  
2. Attach the Sheet to the MDC Modem.  
Safety Working  
MDC Modem  
MDC Modem  
View "A"  
Connector (J2)  
Cable  
Connector (J2)  
Sheet  
Cable  
View "A"  
5~7mm  
Sheet  
3~4mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-34  
n Arranging the Cables and setting the LCD Cable/MIC Frame  
1. Pass the LCD Cable and Antenna Cables through the LCD Cable/MIC Frame.  
2. Attach the LCD Conductive Sheet and the Gasket to the LCD Cable/MIC Frame.  
3. Set the LCD Cable/MIC Frame to the Top Cabinet.  
View "A"  
Safety Working  
Pass the LCD Cable and the two Antenna Cables  
through the LCD Cable/MIC Frame.  
Top Cabinet  
Gasket  
Gasket  
LCD Cable  
LCD Cable/MIC  
Frame  
LCD Cable and  
Antenna Cable  
LCD Conductive  
Sheet  
Antenna Cables  
View "B"  
View "A"  
LCD Cable/MIC  
Frame  
LCD Conductive  
Sheet  
View "B"  
Gasket  
LCD Cable/MIC  
Frame  
LCD Cable  
LCD Conductive  
Sheet  
Antenna Cables  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-35  
7.2.17. Setting the KB Cable Cover, Keyboard and PCMCIA Protector  
1. Fix the PCMCIA Protector using the five Screws<G>. No1  
<F>  
:No8  
to No6  
<F>  
<F>  
:No11  
2. Connect the two Cables of the Keyboard to the two Con-  
nectors (CN932, CN933) on the KBD PCB.  
3. Set the Keyboard.  
:No10  
<F>  
:No7  
<F>  
:No9  
4. Fix the KB Cable Cover using the five Screws<F>. No7 to  
No11  
KB Cable Cover  
<G>  
:No4  
Note:  
Tighten the Screws in the numbered order (No1 to No11).  
<G>  
:No1  
PCMCIA  
Protector  
<G>  
:No5  
to Connector  
(CN933)  
Screws <F>: DRHM0002ZA  
Screws <G>: DRQT2+I35FKL  
<G>  
:No6  
<G>  
:No2  
<G>  
:No3  
to Connector  
(CN932)  
Keyboard  
KB PCB  
Connector  
(CN933)  
Connector  
(CN932)  
n Arranging the Keyboard  
1. Attach the KB Spacer Sheet and the two Gaskets to the Keyboard.  
Keyboard  
KB Spacer Sheet  
Gasket  
Gasket  
View "A"  
View "B"  
0~1mm  
0~1mm  
View "A"  
View "B"  
KB Spacer  
Sheet  
Gasket  
0~0.5mm  
Gasket  
0~0.5mm  
KB Spacer  
Sheet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-36  
7.2.18. Setting the KB Cover, Hinge Cover L, Hinge Cover R and Keyboard  
1. Insert the front hooks of the Keyboard to the Top Cabinet  
<B>  
:No9  
<C>  
in order, and set the Keyboard.  
:No1  
<C>  
:No2  
Hinge Cover L  
2. Fix the Hinge Cover L and R using the four Screws<C>.  
No1 to No4  
3. Fix the Hinge Cover L and R using the four Screws<D>.  
No5 to No8  
<B>  
:No10  
<C>  
:No3  
<C>  
:No4  
<B>  
:No11  
<D>  
:No7  
<D>  
:No5  
<D>  
:No8  
<B>  
:No12  
<D>  
:No6  
4. Fix the KB Cover using the four Screws<B>. No9 to No12  
KB Cover  
Note:  
Tighten the Screws in the numbered order (No1 to No12).  
Hinge Cover R  
Screws <B>: DRQT26+D4FZL  
Screws <C>: DFHE5054XA  
Screws <D>: DFHE5054XA  
Front hook  
1
2
3
4
5
Keyboard  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-37  
7.2.19. Setting the HDD  
1. Set the HDD FPC to HDD.  
2. Attach the Heater to HDD.  
HDD U Case Ass’y  
3. Attach the Heater Sheet to the Heater.  
4. Attach the two Sheets to HDD.  
5. Attach the six HDD Forming MFYPC and the two HDD  
Terminal Plate Upper to the HDD Damper Ass’y  
6. Attach the six HDD Forming MFYPC and the two HDD  
Terminal Plate Upper to the HDD Damper Ass’y.  
7. Set the HDD Damper Ass’y to HDD.  
HDD FPC  
HDD Terminal  
Plate Upper  
<A>  
HDD  
HDD  
Damper  
Ass’y  
8. Attach the Side Cushion to the HDD L Case Ass’y.  
9. Set the HDD U Case Ass’y and the HDD L Case Ass’y,  
and set the two Tabs of the HDD L Case Ass’y.  
10. Fix the HDD U Case Ass’y and the HDD L Case Ass’y  
using the four Screws<A>.  
HDD Forming  
MFYPC  
Heater Sheet  
Sheet  
Sheet  
HDD Forming  
MFYPC  
HDD Forming  
MFYPC  
HDD Terminal  
Plate Upper  
Side Cushion  
Screws <A>: DFHE5025XA  
<A>  
<A>  
Tab  
Heater  
<A>  
Tab  
HDD U Case Ass’y  
n Attaching the Sheet  
Safety Working  
View "A"  
Heater Sheet  
Heater  
View "A"  
View "D"  
View "C"  
View "E"  
Sheet  
Sheet  
0~2mm  
0~2mm  
Sheet  
View "B"  
HDD FPC  
View "B"  
Sheet  
HDD FPC  
HDD  
Heater  
HDD  
Heater Sheet  
Heater  
View "E"  
View "D"  
View "C"  
Do not put the Cables between  
the Heater and the HDD.  
Heater  
Sheet  
Cables  
Heater  
Heater  
Sheet  
Sheet  
0~2mm  
0~2mm  
HDD FPC  
Terminal  
HDD Cables HDD FPC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-38  
7.2.20. Setting the Battery Pack, the HDD Pack and the FDD Pack  
1. Set the FDD Pack.  
2. Set the HDD Pack.  
3. Set the Battery Pack.  
MP  
Cover  
Battery  
Cover  
HDD Cover  
FDD Pack  
Battery Pack  
HDD Pack  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-39  
8 Exploded View  
B
K406  
K74  
B
K75  
K406  
K64  
K73  
B
B
B
K400  
K406  
K406  
B
K400  
K17  
L
L
K409  
L
K409  
E19  
K409  
K65  
K785  
K22  
K69  
K68  
K25  
A
F
K409  
K405  
K36  
K457  
E9  
K72  
K21  
E45  
K785  
A
K409  
K93  
K26  
K21  
E4  
A
K452  
K409  
K99  
E46  
E47 E14  
K27  
E3  
K61  
K8  
K70  
K787  
K463  
K787  
K786  
K461  
K4  
K787  
V
K54  
K1  
V
K2  
K1-11  
K1-1  
E13  
A
K1-2  
K1-8  
Screw tightening torque  
A
B
F
G
I
0.19 +_ 0.02 N.m  
(2.0 _+ 0.2 kgf.cm)  
K1-6  
K1-13  
K1-15  
K1-12  
0.45 +_ 0.05 N.m  
(4.5 +_ 0.5 kgf.cm)  
K1-12  
A
0.49 +_ 0.05 N.m  
(5.0 +_ 0.5 kgf.cm)  
K1-13  
K1-3  
K1-14  
K1-2  
1.47 _ 0.20 N.m  
+
(15 +_ 2.0 kgf.cm)  
K1-8  
0.18 +_ 0.22 N.m  
(2.0 +_ 0.2 kgf.cm)  
K1-9  
K1-10  
L
0.2 +_ 0.02 N.m  
(2.0 _+ 0.2 kgf.cm)  
CF-29N3LGZBM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B
K2-31  
B
K2-7  
K2-12  
K2-32  
K2-13  
K2-7-2  
K2-8  
B
B
K2-7-1  
K2-12-2  
K2-12-1  
K2-7-3  
K2-13-3  
K2-8-7  
K2-12-4  
K2-13-2  
K2-8-1  
K2-8-2  
K2-13-1  
K2-13-4  
L
K2-7-1  
K2-12-3  
K2-22  
B
B
K2-12-5  
K2-22  
B
K2-7-4  
K2-8-7  
L
K2-8-3  
K2-41  
K2-8-1  
K409  
L
K2-8-5  
K33  
F
K412  
K39  
K18  
K16  
B
B
K2-9  
K2-9-11  
K2-9-2  
K2-22  
K2-8-4  
K2-8-6  
K2-8-7  
B
K2-9-1  
K2-9-5  
K2-11  
B
K20  
A
K2-31  
B
K2-9-6  
K2-22  
K400  
B
K2-9-12  
K2-21  
K2-9-11  
K2-27  
P
K2-9-4  
K2-9-8  
K2-11-3  
K2-9-1  
K2-30  
K2-42  
B
K2-9-7  
K2-9-3  
L
K2-43  
K2-11-1  
K2-11-2  
K2-22  
K2-9  
-9  
K2-9-12  
K2-43  
K2-9-9  
L
K2-3  
K2-9-10  
K2-21  
P
L
L
K2-41  
K2-11-4  
K2-30  
K2-2  
K2-33  
K2-5  
K2-4  
K2-3  
K2-16  
K2-14  
K2-15  
K2-22  
B
K2-18  
K23  
G
K2-24  
K31  
K866  
K2-26  
K2-23  
K2-1  
B
K41  
A
K2  
G
K2-24  
K410  
K2-1-3  
K2-1-1  
K32  
K40  
K2-1-2  
K2-6  
Screw tightening torque  
K34  
A
B
F
G
I
0.19 ± 0.02 N.m  
(2.0 ± 0.2 kgf.cm)  
E48  
K410  
K2-17  
A
E49  
0.45 ± 0.05 N.m  
(4.5 ± 0.5 kgf.cm)  
K2-6-1  
K2-10  
K35  
K2-6-2  
0.49 ± 0.05 N.m  
(5.0 ± 0.5 kgf.cm)  
K2-10-4  
K2-6-1  
1.47 ± 0.20 N.m  
(15.0 ± 2.0 kgf.cm)  
K2-10-1  
K2-10-2  
A
K410  
B
K2-22  
K2-6-3  
0.18 ± 0.02 N.m  
(2.0 ± 0.2 kgf.cm)  
B
K2-10-1  
0.2 ± 0.02 N.m  
(2.0± 0.2kgf.cm)  
L
P
B
K2-22  
B
K2-10-3  
0.8 ± 0.1 N.m  
(8.0 ± 1.0 kgf.cm)  
CF-29N3LGZBM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
N
E32  
K316  
H
K403  
F
K412  
A
A
N
K312  
K464  
K408  
K303  
K316  
E
H
K45  
K304  
K313  
K310  
K311  
E32-02  
K403  
K305  
G
K316  
K311  
K316  
G
K872  
K38  
K2  
E32-01  
K314  
A
K778  
K315  
C
K46  
E32-03  
K7  
K313  
K311  
K5  
F
K778  
E12  
K304  
E
A
K409  
K7  
K865  
K450  
K306  
K309  
K308  
K19  
E50  
K301  
K302  
BT  
K858  
K871  
K24  
K83  
A
E8  
K405  
K99  
E6  
K80  
E2  
K770  
K7  
A
K405  
E43  
K37  
K458  
F
Screw tightening torque  
K859  
K43  
K55  
A
C
E
F
G
H
I
0.19 +_ 0.02 N.m  
(2.0 _ 0.2 kgf.cm)  
+
K7  
A
K879  
K783  
K409  
E15  
K99  
K405  
0.216 _+ 0.0196 N.m  
K86  
(2.2 _ 0.2 kgf.cm)  
+
K773  
0.314 _ 0.0196 N.m  
+
(3.2 +_ 0.2 kgf.cm)  
K52  
K460  
A
K7  
K405  
0.49 +_ 0.05 N.m  
(5.0 +_ 0.5 kgf.cm)  
E1  
K784  
K8  
K409  
F
K408  
A
K51  
A
K405  
0.441 _+ 0.049 N.m  
(4.5 +_ 0.5 kgf.cm)  
K51  
K87  
N
K6  
1.47 +_ 0.20 N.m  
(15 +_ 2.0 kgf.cm)  
K406  
Y
K862  
K90  
G
W
K870  
K92  
K861  
K406  
Z
P
K863  
A
1.30 +_ 0.17N.m  
(13 +_ 2.0 kgf.cm)  
E7  
K462  
A
K405  
N
E44  
A
K861  
E42  
E41  
K405  
K92  
A
L
0.18 +_ 0.02 N.m  
(2.0 +_ 0.2 kgf.cm)  
K15  
A
A
K405  
Z
A
A
K405  
K869  
K861  
W
K860  
E789  
Y
0.2 +_ 0.02 N.m  
(2.0 +_ 0.2 kgf.cm)  
M
N
P
K868  
0.45 +_ 0.03 N.m  
(4.5 +_ 0.3 kgf.cm)  
K405  
K873  
K81  
K52  
K864  
E790  
A
K405  
0.8 +_ 0.1 N.m  
(8.0 _+ 1.0 kgf.cm)  
K465  
CF-29N3LGZBM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
K881  
K883  
K882  
E
K3-14  
E
K3-14  
K2  
K3-24  
K894  
K3-25  
X
E
K3-15  
K3-16  
K3-23  
E
K3-14  
E
K3-26  
K3-14  
E
K3-10  
K3-12  
K3-26  
K3-10  
K3-6  
K3-10  
K3-18  
K3-13  
K3-22  
K3-11  
K3-18  
K3-3  
X
K3-8  
K3-17  
K3-2  
K3-7  
K3-11  
E
K3-14  
K3  
E
K3-14  
K3-9  
K3-9  
K13  
K893  
K3-21  
K3-20  
K49  
K13  
K880  
K402  
K
K402  
K13  
B
K400  
K
K48  
K400  
B
K400  
B
K400  
B
K402  
K
K13  
K402  
K11  
K402  
K
K400  
K
B
K402  
K
K56  
K47  
K7  
K466  
Screw tightening torque  
K50  
K467  
0.19 _+ 0.02 N.m  
A
B
E
K
+
(2.0 _ 0.2 kgf.cm)  
0.45 _+ 0.05 N.m  
(4.5 _+ 0.5 kgf.cm)  
K57  
0.49 _+ 0.05 N.m  
(5.0 _+ 0.5 kgf.cm)  
K884  
0.8 _+ 0.1N.m  
B
B
(8.0 _ 1.0 kgf.cm)  
+
K400  
K400  
CF-29N3LGZBM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
K204  
K876  
K239  
E18  
K876  
K200  
A
K238  
K200-6  
K206  
K200-6-1  
K205  
K239  
K200-6-2  
K7  
K200-14  
K200-1  
K404  
G
K200-1-5  
A
K238  
G
K200-1-2  
K200-13  
K200-12  
G
K404  
K200-1-5  
G
Screw tightening torque  
A
B
F
0.19 +_ 0.02 N.m  
(2.0 +_ 0.2 kgf.cm)  
K200-1-3  
0.45 +_ 0.50 N.m  
(4.5 +_ 0.5 kgf.cm)  
0.441 +_ 0.049 N.m  
(4.5 _ 0.5 kgf.cm)  
+
G
H
1.47 _+ 0.20 N.m  
K235  
(15 _ 2.0 kgf.cm)  
+
1.30 _+ 0.17N.m  
K236  
(13.0 +_ 2.0 kgf.cm)  
CF-29N3LGZBM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E18  
Kapton Tape  
E18-5  
E18-3  
E18-1  
E17  
E18-6  
E18-4  
E18-7  
E18-7  
K225  
E18-6  
K261  
K249  
K874  
K260  
K248  
K237  
E16  
K877  
K875  
E18-8  
K237  
K877  
K230  
E18-10  
Screw tightening torque  
K878  
A
B
C
D
E
0.19 _ 0.02 N.m  
+
+
(2.0 _ 0.2 kgf.cm)  
0.45 +_ 0.05 N.m  
(4.5 _+ 0.5 kgf.cm)  
E18-10  
0.216 +_ 0.0196 N.m  
(2.2 _ 0.2 kgf.cm)  
+
0.314 +_ 0.0196 N.m  
(3.2 +_ 0.2 kgf.cm)  
0.49 +_ 0.05 N.m  
(5.0 +_ 0.5 kgf.cm)  
CF-29N3LGZBM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
K222  
O
K222  
O
K201  
K67  
K222  
O
E11  
K451  
K66  
K201-1  
-4  
E40  
K201-1  
E10  
K451  
E20  
K201-1-6  
O
O
G
K223  
O
K222  
K222  
K222  
O
O
K222  
O
K222  
K201-9  
K201-1-2  
K202-1  
K201-1-5  
K228  
O
K202  
K203  
K222  
G
K201-1-6  
O
K223  
K201-1-3  
K215  
O
K222  
K211  
K246  
Screw tightening torque  
K222  
O
0.19 +_ 0.02 N.m  
(2.0 +_ 0.2 kgf.cm)  
A
B
C
D
G
O
0.45 +_ 0.05 N.m  
(4.5 +_ 0.5 kgf.cm)  
0.216 +_ 0.0196 N.m  
(2.2 +_ 0.2 kgf.cm)  
0.314 +_ 0.0196 N.m  
(3.2 +_ 0.2 kgf.cm)  
1.47 +_ 0.20 N.m  
(15 +_ 2.0 kgf.cm)  
0.49 +_ 0.05 N.m  
(5.0 +_ 0.5 kgf.cm)  
CF-29N3LGZBM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9 Replacement Parts List  
Note: Important Safety Notice  
Components identified by  
mark have special characteristics important for safety.  
When replacing any of these components, use only manufacturer's specified parts.  
CF-29N3LGZBM  
REF.NO. and AREA  
PART NO.  
DL3UPB465HRA  
DESCRIPTION  
Q'TY  
Main Block Unit  
E1  
PCB, MAIN  
PCB, IO  
RTL  
RTL  
RTL  
RTL  
RTL  
1
E2  
DL3U1B266DRA  
DL3U2B266DRA  
DL3U3B266DRA  
DL3U5B266DRA  
DL3UP1269ARA  
DL3UPB270ARA  
DL3UP1271BRA  
DL3U11331ARA  
DL3U21331ARA  
DL3UP1336ARA  
N3CABSD00008  
DFJK50U092BB  
DFJK9007ZA  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
E3  
PCB, LED  
PCB, KBD  
PCB, TP  
E4  
E6  
E7  
FPC, HDD-MAIN  
FPC, IO  
E8  
E9  
FPC, SW-LED  
E10  
PCB, W-LAN ANT R  
PCB, W-LAN ANT L  
PCB, EXT ANT  
RTL  
RTL  
RTL  
E11  
E12  
E13  
HDD  
E14  
KB CN FFC  
E15  
TP SW FFC  
E16  
N0GF1J000007  
DFJS875XA  
INVERTER  
E17  
LCD CABLE  
E18  
DFWV08A0073  
DL3DE0177ARA  
DFHG874ZA  
LCD UNIT ASS'Y  
LCD ASS'Y  
E18-1  
E18-3  
E18-4  
E18-5  
E18-6  
E18-7  
E18-8  
E18-10  
E19  
LCD SIDE DAMPER UN  
LCD SIDE DUMPER R13  
LCD DAMPER FRONT  
TS SPACER A  
DFHG850YA  
DFHG884ZA  
DFHG1582XA  
DFHG1583XA  
DFMY0409ZA  
DFMY0348ZB  
N2ABZJ000033  
DFJS868ZA  
TS SPACER B  
LCD THERMAL PLATE  
LCD LAMP SHEET  
KEYBOARD  
E20  
CABLE (BLACK), ANT PCB R  
CABLE (GRAY), ANT PCB L  
CABLE (BLACK), KB PCB  
CABLE (GRAY), KB PCB  
MDC MODEM  
E40  
DFJS869ZA  
E41  
DFJS870ZA  
E42  
DFJS871ZA  
E43  
N5HAZ0000013  
N5HZC0000014  
N2EABEC00006  
DFJK10T017BB  
DFJS865ZA  
E44  
WIRELESS LAN MODULE  
TOUCH PAD  
E45  
E46  
LED 6 FFC  
E47  
POWER SW CABLE  
MODEM　CABLE  
LAN　CABLE  
E48  
DFJS866ZA  
E49  
DFJS978ZA  
E50  
K1NBD6A00006  
DL3UPB484ARA  
DFJK12T034DB  
PCMCIA EJECTOR  
PCB, SD-CN  
E789  
E790  
Accessories  
A1  
RTL  
FFC, PAD  
CF-AA1653AM4  
K2CG3DR00003  
DFQX5556YB  
CGR-B/982A  
AC ADAPTER  
AC CABLE  
1
1
1
1
1
A2  
A3  
MANUAL  
A5  
BATTERY PACK  
MODEM CABLE  
A6  
DFJS954ZA  
Packing Material  
P1  
DFPK1154LA  
DFPE0611ZA  
DFPN0754XA  
PACKING CASE  
MANUAL HOLDER  
CUSHION  
1
1
1
P2  
P3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mechanical Parts  
K1  
DFWV99A0105  
DL3UP1268ARA  
DFHE5025XA  
DFHG1696ZA  
DFHR8489ZA  
DFMY3143YA  
L9DZAA000004  
DFMD8038ZA  
DFMD8039ZA  
DFMX0634ZA  
DFHG1750ZA  
DFHR8482YA  
DFHR3C10ZA  
DFKM8179YC-0  
DFBD9005ZA-1  
DFUQ0099ZA  
DFBD0168ZA-1  
DFHR6069ZA-1  
DFHR6126YA-0  
DFHM0352ZA  
DFKE0732WA-0  
DFKE0733VA-0  
DFKE8182YA-0  
DFBH3033ZB  
DFGE0119ZA-0  
DRQT26+D3FKL  
DFKE8181ZA-0  
DFBH3033ZB  
DFGE0116ZA-0  
DRQT26+D3KLT  
DFHR3B69ZA  
DFKE8180ZA-0  
DFBH3033ZB  
DFGE0082XA-0  
DFGE0081ZA-0  
DFKE9062YA-0  
DFHR3527XA  
DFMD1165YA  
DRQT26+D3KLT  
DFKE8184ZA-0  
DFBH3033ZB  
DFGE0083YA-0  
DFHM0310YA  
DFHM0327YA  
DFHR3466YA  
DFKE0799ZA-0  
DFUN0068XA  
DFUS0292ZB  
DRHM5025YAT  
DXQT2+F3FNLT  
DRQT26+D3KLT  
DFHR3B71ZA  
DFKE8183ZA-0  
DFBH3033ZB  
DFGE0084ZA-0  
DRQT26+D3KLT  
DFHR3697ZAT  
HDD MOUNTING KIT  
FPC, HDD  
1
1
4
2
1
2
1
1
1
2
4
1
1
1
1
1
1
1
1
2
1
1
1
2
1
2
1
2
1
2
1
1
2
1
1
1
1
1
3
1
2
1
2
1
1
1
1
1
2
1
2
2
1
2
1
2
2
K1-1  
K1-2  
SCREW  
K1-3  
LCD DUMPER  
K1-6  
HDD DAMPER ASS'Y  
HDD THERMAL PLATE UPPER  
HEATER  
K1-8  
K1-9  
K1-10  
K1-11  
K1-12  
K1-13  
K1-14  
K1-15  
K2  
HDD L CASE ASS'Y  
HDD U CASE ASS'Y  
SHEET  
HDD FORMING MFYPC  
SIDE CUSHION, HDD  
SHEET, HEATER  
TOP CABINET ASS'Y 2  
POWER SW ASS'Y  
POWER SW SPRING  
POWER SW KNOB  
POWER SW ARM  
WM SW COVER  
LCD FOOT CAP  
HDD LATCH LEVER  
HDD LATCH COVER  
PC COVER ASS'Y 2  
LID HINGE  
K2-1  
K2-1-1  
K2-1-2  
K2-1-3  
K2-2  
K2-3  
K2-4  
K2-5  
K2-6  
K2-6-1  
K2-6-2  
K2-6-3  
K2-7  
PC COVER SHEET SD  
SCREW  
MP COVER ASS'Y 2  
LID HINGE  
K2-7-1  
K2-7-2  
K2-7-3  
K2-7-4  
K2-8  
MP COVER SHEET 2  
SCREW  
CUSHION, MP COVER  
CN COVER ASS'Y 2  
LID HINGE  
K2-8-1  
K2-8-2  
K2-8-3  
K2-8-4  
K2-8-5  
K2-8-6  
K2-8-7  
K2-9  
CN COVER SHEET R  
CN COVER SHEET L  
CN SLIDE COVER  
CN PACKING-SLIDE  
CN WATER PROOF PLATE  
SCREW  
BATT COVER ASS'Y 2  
LID HINGE  
K2-9-1  
K2-9-2  
K2-9-3  
K2-9-4  
K2-9-5  
K2-9-6  
K2-9-7  
K2-9-8  
K2-9-9  
K2-9-10  
K2-9-11  
K2-9-12  
K2-10  
K2-10-1  
K2-10-2  
K2-10-3  
K2-10-4  
BATT COVER SHEET  
WASHER  
BATT LATCH ANGLE  
LID KNOB SHEET  
LID KNOB  
LID KNOB SPRING  
LID KNOB SPRING PLATE  
SCREW  
SCREW  
SCREW  
CUSHION, BATT COVER  
HDD COVER ASS'Y 2  
LID HINGE  
HDD COVER SHEET  
SCREW  
HDD COVER CUSHION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
K2-11  
K2-11-1  
K2-11-2  
K2-11-3  
K2-11-4  
K2-12  
K2-12-1  
K2-12-2  
K2-12-3  
K2-12-4  
K2-12-5  
K2-13  
K2-13-1  
K2-13-2  
K2-13-3  
K2-13-4  
K2-14  
K2-15  
K2-16  
K2-17  
K2-18  
K2-21  
K2-22  
K2-23  
K2-24  
K2-26  
K2-27  
K2-30  
K2-31  
K2-32  
K2-33  
K2-41  
K2-42  
K2-43  
K3  
DFKE8177ZA-0  
DFBD0185ZA-0  
DFMD1161ZA  
DFUQ0089YA  
DRHM5025YA  
DFKE8176ZA-0  
DFBD0170WA-0  
DFKE0811ZA-0  
DFMD1162ZB  
DFUQ0089YA  
DRHM5025YA  
DFKE8175ZA-0  
DFBD0184ZA-0  
DFKE0810ZA-0  
DFUQ0108ZA  
DRHM5025YAT  
DFKE9068ZA-0  
DFKH8008YA-0  
DFKX0049YA-0  
DFKX0050XA-0  
DFMD7938WA  
DFUQ0102ZA  
DRQT26+D3KLT  
DRSB26+4FKLT  
DRSB4+8FKLT  
DFHR3497YA  
DFHR3524ZA  
DXQT3+F4FNLT  
DFHE5121YA  
DXQT26+D4NLT  
DFGE0097ZA-0  
DFGE0102ZA-0  
DFGE0104ZA-0  
DFHG1699ZA  
DFKF8162YA-0  
DFHG3526YA  
DFHG3528ZA  
DFHR6083XA-0  
DFKE8166ZA-0  
DFMD1164ZA  
DFMD7945ZA  
DFMS0019ZA  
DFMY0414ZA  
DFMY9023WA  
DFUW0064YAT  
DXQT26+D4NLT  
DXYN26+J6FNL  
DXYN26+F5NLT  
L0AA04A00023  
DFHP7163ZA  
DFUS0299ZAT  
DFMC0406ZAT  
DFMC0685ZAT  
DFMY0248YA  
DFMY3212ZA  
DFHR3B66ZA  
DFHR3B67ZA  
DFMC0685ZA  
PC LATCH ASS'Y 2  
PC LATCH LEVER 2  
PC LATCH ANGLE  
SPRING (MP/PC LATCH)  
SCREW  
1
1
1
1
3
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
2
12  
2
2
1
1
2
6
2
1
2
1
2
1
1
1
1
1
1
2
3
2
1
1
7
2
4
1
3
1
1
1
1
1
1
2
1
MP LATCH ASS'Y 2  
MP LATCH LEVER  
MP LATCH CASE 2  
MP LATCH ANGLE  
SPRING (MP/PC LATCH)  
SCREW  
CH LATCH ASS'Y 2  
CN LATCH LEVER 2  
CN LATCH CASE 2  
SPRING, CN LATCH  
SCREW  
HDD LATCH LOCK ASS'Y  
HANDLE ASS'Y 2  
HANDLE BASE L  
HANDLE BASE R  
TOP LIB ANGLE CPU  
POTRE SPRING  
SCREW  
SCREW  
SCREW  
POWER SW SHEET  
KB CABLE CUSHION  
SCREW  
SCREW  
TW SCREW  
HDD LATCH LOCK CASE SHEET  
SHEET, REAR BELT COVER  
SHEET(USB), TOP REAR COVER  
LCD LOCK SHEET  
BOTTOM CABINET ASS'Y 2  
MP EJECT PACKING-SLIDE  
SPEAKER SPACER  
MP EJECT LEVER  
MP EJECT SLIDE ASS'Y  
MP EJECT PLATE  
HEAT PIPE BOTTOM ANGLE  
SPEAKER ANGLE  
CPU HEAT PIPE RUBBER  
HEAT PIPE UNIT BOTTOM  
MP EJECT SPRING  
SCREW  
K3-2  
K3-3  
K3-6  
K3-7  
K3-8  
K3-9  
K3-10  
K3-11  
K3-12  
K3-13  
K3-14  
K3-15  
K3-16  
K3-17  
K3-18  
K3-20  
K3-21  
K3-22  
K3-23  
K3-24  
K3-25  
K3-26  
K4  
SCREW  
SCREW  
SPEAKER  
ADHESIVE TAPE, SP  
EMI SPRING  
EMI GASKET HDD  
GASKET SHEET  
CPU HEATSINK RUBBER  
LAN HEAT PLATE  
LAN HEAT PLATE SPACER  
HEAT PIPE SPACER  
CONDUCTIVE SHEET, LCD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
K5  
DFMD7929XA  
DFMD9090XA  
DFMX0635ZB  
DFMX1006ZA  
DFGT1055ZA  
DFHG370ZA  
TOP RIB ANGLE FRONT  
BATT HDD CN ANGLE  
SHEET (P4:2)(P13:1)(P25:4)  
CABLE SHEET  
1
1
7
2
1
4
1
1
1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
K6  
K7  
K8  
K11  
K13  
K15  
K16  
K17  
K18  
K19  
K20  
K21  
K22  
K23  
K24  
K25  
K26  
K27  
K31  
K32  
K33  
K34  
K35  
K36  
K37  
K38  
K39  
K40  
K41  
K43  
K45  
K46  
K47  
K48  
K49  
K50  
K51  
K52  
K54  
K55  
K56  
K57  
K61  
K64  
K65  
K66  
K67  
K68  
K69  
K70  
K72  
K73  
K74  
K75  
K80  
K81  
K83  
BOTTOM COVER SHEET A  
FOOT RUBBER  
DFHP7162ZA  
DFGE0077ZA-0  
DFGP0198ZB-0  
DFHG1734ZA-0  
DFHG830ZA  
HD FPC TAPE  
WM COVER  
PALM TOP COVER SHEET  
SERIAL CN COVER  
CON SPACER  
DFHR3C26ZA  
DFHP7140ZA  
DFHP7160YA  
DFHR1012ZA  
DFHR3529YA  
DFHR3560YB  
DFHR3619ZA  
DFHR3643ZA  
DFHR6065WA  
DFHR6180ZA-0  
DFHR6090XA-0  
DFHR6181ZA-0  
DFHR6104WA-0  
DFHR6107YA  
DFHR6108ZA-0  
DFMC0406XA  
DFMD4045ZA  
DFMD4048ZA  
DFMD7960ZA  
DFMX0702ZA  
DFUS0296ZA  
DFUS0297ZA  
DFGE0078ZA-0  
DFGE0085ZA-0  
DFGE0086YA-0  
DFGE0087ZA-0  
DFHR3445ZA  
DFHR3713ZA  
DFHR6068ZA  
DFHR6084YA  
DFHR6117WA  
DFKE8173YB-0  
DFKE0808ZA-0  
DFKE0714YA-0  
DFKE0715YA-0  
DFKE0739YA-0  
DFKE0740YA-0  
DFGE0075UA-0  
DFGE0076YA-0  
DFHR6064ZA  
DFHR3523WA  
DFQT0045ZA  
DFQT9974ZA  
DFQT9948ZA  
DFMX1102XA  
DFHR3A32ZA  
DFMY9032ZA  
SERIAL CN LID PLATE  
TAPE CPU  
PW LED SHEET  
CLAMPER  
LID SW CUSHION  
TOUCH PAD ADHESION SEAT  
LEDX6 SPACER SHEET  
TP BOTTOM TAPE  
DC/USB CN COVER FRAME  
DC COVER  
SERIAL CN CAP 2  
USB COVER  
LAN CN COVER  
LED SPACER SHEET  
REAR I/O FPC COVER SHEET  
GASKET FOR MP  
SERIAL COVER PLATE  
DC/USB COVER LID PLATE  
DC/USB COVER PLATE  
INSULATION SHEET  
MP FINGER  
USB SHIELD SPRING  
SPEAKER NET  
BOTTOM COVER SHEET B  
BOTTOM COVER SHEET C  
BOTTOM COVER SHEET D  
HEAT DISSIPATION RUBBER  
MINI PCI SPACER U2 (P5:2)(P27:1)  
LCD CABLE/MIC FRAME  
PAD SW FFC COVER  
DIMM RADIATION SHEET  
DIMM COVER ASS'Y 2  
KB CABLE COVER  
HINGE COVER L  
HINGE COVER R  
ANTENNA PCB COVER R  
ANTENNA PCB COVER L  
PALM TOP COVER  
KB COVER  
TOUCH PAD SW KNOB IN  
KB SPACER SHEET  
ENERGY STAR LABEL  
WINDOWS XP LABEL  
CENTRINO LABEL  
PC PLATE SHEET  
MINI PCI PROTECTOR SHEET  
PCMCIA HEAT P ASS'Y  
Download from Www.Somanuals.com. All Manuals Search And Download.  
K86  
DFHM0304YB  
DFHM0330YB  
DRHM5118ZA  
DFHR3713ZA  
DFHG0306ZA-0  
DFHR3741ZA  
DFWV80A0353  
DFKF8163ZA-0  
DFBH3027YA  
DFBH3028YA  
DXSB4+6FNLT  
DFWV84A0240  
DFGP0195ZA  
DFHP7183ZA  
DFHE0829ZA  
DFHG1706ZA  
DFQT9664ZA-1  
DFWV80C0496  
DFKM8180ZA-0  
DFGX0374ZA-0  
DFGX0375ZA-0  
DFGX0376ZA-0  
DFGX0377ZA-0  
DRHM0062ZAT  
DFGB0070ZA-1  
DFBS8002ZA-0  
DFHR3700ZA  
DFUW0095ZD  
DFMD1156WA  
DFMD1194YA  
DFMC0685ZA  
DFHG1698ZA  
DFHG1706ZA  
DRSB26+8HKL  
DRSB4+10FKL  
DFHP5320YA  
DFGB0087YA-2  
DFHR3425XB  
DFHR8500ZA  
DFHR8501ZA  
DFHR7968ZA  
DXYN2+C3FNL  
DFHG886ZA  
MDC SPACER  
2
1
K87  
CN SPACER  
K90  
SCREW  
2
K92  
MINI PCI SPACER U2  
TOUCH PAD SW KNOB  
FFC CN STOPPER  
LCD FRONT CABINET PANEL ASS'Y  
LCD FRONT CABINET 2  
HINGE L  
2
K93  
1
K99  
3
K200  
1
K200-1  
K200-1-2  
K200-1-3  
K200-1-5  
K200-6  
K200-6-1  
K200-6-2  
K200-12  
K200-13  
K200-14  
K201  
1
1
HINGE R  
1
SCREW  
2
LCD PANEL KIT  
1
LCD PANEL  
1
TS TAPE 13 L  
1
LID MAGNET  
1
FORMING U  
1
TOUGH BOOK LABEL (W)  
LCD REAR CABINET ASS'Y  
LCD REAR CABINET 2  
LCD CORNER PROTECTOR RL  
LCD CORNER PROTECTOR RR  
LCD CORNER PROTECTOR FL  
LCD CORNER PROTECTOR FR  
SCREW  
1
1
K201-1  
K201-1-2  
K201-1-3  
K201-1-4  
K201-1-5  
K201-1-6  
K201-9  
K202  
1
1
1
1
1
2
PANA BADGE  
1
LCD LATCH ASS'Y  
PUSH LABEL  
1
K202-1  
K203  
1
LCD LATCH SPRING  
LCD HOLD PLATE 13 L  
LCD PLATE R  
1
K204  
1
K205  
1
K206  
CONDUCTIVE SHEET, LCD  
WATER RESIST SHEET CTR  
FORMING U  
1
K211  
1
K215  
1
K222  
SCREW  
16  
2
K223  
SCREW  
K225  
LCD CABLE TAPE  
TOUGH BOOK BADGE  
LCD BACK HOLDER 13  
LCD DROP HOLDER L  
LCD DROP HOLDER R  
CDD SHEET  
3
K228  
1
K230  
1
K235  
1
K236  
1
K237  
2
K238  
SCREW  
2
K239  
LCD METAL DAMPER  
CABLE CLAMPER  
INVERTER CASE L  
INVERTER CASE U  
INVERTER SHIELD  
INV SHIELD TAPE  
SCREW (P4:14)(P19:4)  
SCREW  
4
K246  
DFMD2158ZA  
DFMX1187ZB  
DFMX1186ZA  
DFMC0842YA  
DFMC0820ZA  
DRQT26+D4FKL  
DRSB3+8FKL  
DXSB4+12FNLB  
DXYN4+J8FNL  
DFHE5025XA  
DRHM5054XA  
DRHM5104ZA  
DRHM0002ZA  
DRHM5025YA  
DFHE5058ZB  
1
K248  
1
K249  
1
K260  
1
K261  
1
K400  
18  
8
K402  
K403  
SCREW  
2
K404  
SCREW  
4
K405  
SCREW (P5:4)(P26:5)(P41:12)  
SCREW (P4:8)(P26:2)  
SCREW  
21  
10  
5
K406  
K408  
K409  
SCREW (P4:5)(P26:14)  
SCREW  
19  
5
K410  
K412  
SCREW  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
K450  
K451  
K452  
K457  
K458  
K460  
K461  
K462  
K463  
K464  
K465  
K466  
K467  
K770  
K773  
K778  
K783  
K784  
K785  
K786  
K787  
K858  
K859  
K860  
K861  
K862  
K863  
K864  
K865  
K866  
K868  
K869  
K870  
K871  
K872  
K873  
K874  
K875  
K876  
K877  
K878  
K879  
K880  
K881  
K882  
K883  
K884  
K893  
K894  
FDD ASS'Y  
E32  
DFMC0685ZA  
DFHG1727ZA  
DFHR3747ZA  
DFHR3743YA  
DFMX0634ZA  
DFHR3778ZA  
DFHR3807ZA  
DFHE5092ZA  
DFHE0284YA  
DRQT2+G6FKL  
DFMX0634ZA  
DFHR6144YA  
DFHG1757YA  
DFMD7A49ZA  
DFHE0910ZA  
DRHM5117ZA  
DFMX1191ZA  
DFHE0522ZA  
DFHE0910ZA  
DFMD7A37ZA  
DRQT2+I35FKL  
DFMY0418ZA  
DFMX1196ZA  
DFMX1195YA  
DRHM5104ZA  
DFHG1812ZA  
DFMX1198ZA  
DFMY3151ZA  
DFGK0133ZA  
DFHR6184ZA  
DFHR7518ZA  
DFHE0965ZA  
DFHE0967ZA  
DFHE0842ZA  
DFHR6197ZA  
DFHR3B57ZA  
DFHR3B75ZA  
DFHR3B76ZA  
DFHG876ZA  
DFHG9004ZA  
DFHR3B74ZA  
DFMY0416ZA  
DFHR3B08XA  
DFMY0348ZB  
DFMY0407ZA  
DFMY0417ZA  
DFHR6195ZA  
DFHG1852ZA  
DFMD2168ZA  
CONDUCTIVE SHEET, LCD  
ANTENNA CAP (LAN)  
POWER SW PWB CUSHION  
POWER LED PACKING SHEET  
SHEET  
1
2
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
1
2
1
6
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
BATTERY ANGLE SHEET W  
KB CABLE COVER CAUTION  
SCREW  
GASKET  
SCREW  
CD EDGE SHEET  
DIMM STOPPER  
DIMM STOPPER SPACER  
CONNECTOR RING  
ESD GASKET-A  
SCREW  
CPU INSULATION SHEET  
SHEET, CCFL PROTECT  
ESD GASKET-A  
PCMCIA PROTECTOR  
SCREW  
PCMCIA GRAPHITE PLATE  
PCMCIA RING INS SHEET  
SD INS SHEET  
SCREW  
SPACE PWB HOLD MP  
INS SHEET, HEAT PIPE  
MEMORY HEAT PLATE  
SD LED SHEET  
DC USB COVER HOOK  
INSULATION SHEET  
FPC CONDUCTION TAPE  
EMP SHEET BATT HDD FPC  
CABLE GASKET  
MP CN SPACER  
POWER CABLE GUARD  
LCD INVERTER CASE SPACER L  
LCD INVERTER CASE TAPE  
INVERTER CUSHION  
LCD BACK DAMPER ASS'Y  
LCD INVERTER CASE SPACER S  
ICH6 COOLING SHEET  
SHEET, DIMM STOPPER  
LCD LAMP SHEET  
RADIATION RUBBER  
COIL COOLING SHEET  
SPACER, DIMM COVER  
CUSHION, LOCK PLATE  
LOCK PLATE  
DL1BAA174ARA  
DFJK9003ZA  
ASS'Y, FDD  
FFC, FDD  
1
1
1
1
1
1
1
4
E32-01  
E32-02  
E32-03  
K301  
K302  
K303  
K304  
N3AAYYY00001  
DL3UPB330ARA  
DFGL0018ZC-3  
DFGX0178PA-0  
DFGX0179VA-0  
DRHM5076YA  
FDD  
PCB, FDD  
LENS, FDD  
CABINET, FDD  
BACK PANEL, FDD  
SCREW  
Download from Www.Somanuals.com. All Manuals Search And Download.  
K305  
K306  
K308  
K309  
K310  
K311  
K312  
K313  
K314  
K315  
K316  
DFHR4050ZA  
DFHR5440YA  
DFHR8295ZC  
DFHR8296ZB  
DFHR8297YA  
DFHE0861ZA  
DFMD7339ZA  
DFMD7340ZA  
DFMD7445YA  
XTB2+6GFJK  
XTB26+8GFJK  
TUBE, LED  
1
1
1
2
2
3
1
2
1
1
4
GUIDE, FDD CONNECTOR  
LS DAMPER, UNDER-1  
LS DAMPER, UNDER-2  
DAMPER, FDD  
CUSHION, FDD  
CHASSIS, FDD  
CLAMP, FDD  
FDD RELAY METAL PLATE  
SCREW  
SCREW  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Replacement Parts List  
Note: Important Safety Notice  
Components identified by  
mark have special characteristics important for safety.  
When replacing any of these components use only manufacturer's specified parts.  
CF-29N3LGZBM  
REF. NO and AREA  
Main PCB  
BT 1  
C 2  
PART NO.  
DESCRIPTION  
Q'TY  
CR2032/S5J  
F1J0J106A013  
RTC BATTERY  
CAPACITOR, 6.3V, 10µF  
1
75  
C 3  
C 4  
C 6  
C 7  
C 8  
C 11  
C 12  
C 13  
C 15  
C 16  
C 17  
C 19  
C 20  
C 21  
C 23  
C 24  
C 25  
C 26  
C 29  
C 30  
C 31  
C 32  
C 34  
C 35  
C 36  
C 37  
C 40  
C 41  
C 42  
C 43  
C 45  
C 46  
C 47  
C 48  
C 49  
C 54  
C 62  
C 63  
C 64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C 70  
C 77  
C 86  
C 87  
C 97  
C 99  
C 100  
C 103  
C 104  
C 108  
C 112  
C 117  
C 123  
C 124  
C 127  
C 270  
C 271  
C 272  
C 273  
C 299  
C 317  
C 321  
C 371  
C 372  
C 373  
C 374  
C 447  
C 448  
C 472  
C 483  
C 484  
C 502  
C 504  
C 505  
C 549  
C 5  
EEFCD0D151ER  
F1G1C104A042  
CAPACITOR, 2V, 150µF  
CAPACITOR, 16V, 0.1µF  
5
C 205  
C 211  
C 512  
C 553  
C 9  
194  
C 10  
C 14  
C 18  
C 22  
C 27  
C 33  
C 38  
C 39  
C 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C 60  
C 61  
C 65  
C 67  
C 68  
C 69  
C 74  
C 75  
C 76  
C 78  
C 79  
C 83  
C 88  
C 89  
C 98  
C 101  
C 107  
C 110  
C 114  
C 130  
C 131  
C 134  
C 135  
C 136  
C 137  
C 140  
C 141  
C 142  
C 143  
C 146  
C 147  
C 149  
C 150  
C 153  
C 154  
C 167  
C 169  
C 171  
C 173  
C 188  
C 189  
C 190  
C 193  
C 195  
C 196  
C 199  
C 200  
C 203  
C 204  
C 206  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C 207  
C 208  
C 210  
C 213  
C 214  
C 215  
C 216  
C 221  
C 222  
C 223  
C 224  
C 225  
C 226  
C 227  
C 228  
C 229  
C 230  
C 232  
C 234  
C 235  
C 239  
C 240  
C 244  
C 248  
C 249  
C 250  
C 251  
C 253  
C 254  
C 255  
C 257  
C 260  
C 261  
C 262  
C 269  
C 275  
C 278  
C 279  
C 281  
C 291  
C 292  
C 293  
C 294  
C 296  
C 298  
C 300  
C 302  
C 304  
C 305  
C 312  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C 313  
C 314  
C 315  
C 316  
C 319  
C 320  
C 322  
C 324  
C 325  
C 326  
C 327  
C 333  
C 334  
C 335  
C 340  
C 341  
C 344  
C 345  
C 346  
C 347  
C 348  
C 349  
C 355  
C 356  
C 357  
C 361  
C 362  
C 363  
C 366  
C 369  
C 387  
C 402  
C 406  
C 410  
C 415  
C 416  
C 418  
C 423  
C 425  
C 427  
C 428  
C 429  
C 430  
C 431  
C 432  
C 433  
C 434  
C 435  
C 436  
C 437  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C 438  
C 439  
C 440  
C 441  
C 442  
C 443  
C 444  
C 445  
C 446  
C 452  
C 453  
C 454  
C 455  
C 457  
C 466  
C 468  
C 470  
C 476  
C 477  
C 485  
C 490  
C 495  
C 500  
C 576  
C 589  
C 593  
C 598  
C 627  
C 628  
C 629  
C 630  
C 631  
C 632  
C 633  
C 50  
F1G1E103A062  
CAPACITOR, 25V, 0.01µF  
47  
C 113  
C 115  
C 116  
C 118  
C 121  
C 122  
C 125  
C 126  
C 164  
C 182  
C 183  
C 184  
C 185  
C 194  
C 212  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C 231  
C 252  
C 263  
C 265  
C 268  
C 276  
C 277  
C 280  
C 286  
C 308  
C 311  
C 337  
C 339  
C 400  
C 401  
C 405  
C 419  
C 420  
C 424  
C 426  
C 478  
C 481  
C 491  
C 542  
C 577  
C 578  
C 579  
C 580  
C 584  
C 585  
C 591  
C 55  
F1G1H222A450  
F1G1A104A014  
CAPACITOR, 50V, 2200pF  
CAPACITOR, 10V, 0.1µF  
2
7
C 389  
C 56  
C 57  
C 178  
C 179  
C 180  
C 403  
C 404  
C 66  
F1H0J1050022  
CAPACITOR, 6.3V, 1µF  
12  
C 85  
C 109  
C 111  
C 128  
C 161  
C 165  
C 264  
C 266  
C 267  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C 414  
C 462  
C 71  
F1G1H102A496  
CAPACITOR, 50V, 1000pF  
30  
C 295  
C 297  
C 301  
C 303  
C 359  
C 360  
C 382  
C 384  
C 459  
C 460  
C 464  
C 465  
C 467  
C 469  
C 471  
C 473  
C 474  
C 475  
C 480  
C 517  
C 519  
C 537  
C 545  
C 563  
C 570  
C 594  
C 596  
C 597  
C 616  
C 72  
EEFCX0D331R  
CAPACITOR, 2V, 330µF  
8
C 73  
C 81  
C 82  
C 84  
C 506  
C 508  
C 510  
C 80  
F1G1A474A018  
CAPACITOR, 10V, 0.47µF  
7
C 90  
C 91  
C 93  
C 94  
C 95  
C 96  
C 92  
F1G0J224A001  
CAPACITOR, 6.3V, 0.22µF  
16  
C 106  
C 343  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C 350  
C 352  
C 353  
C 354  
C 367  
C 368  
C 377  
C 378  
C 380  
C 385  
C 386  
C 391  
C 392  
C 102  
C 531  
C 550  
C 105  
C 119  
C 120  
C 129  
C 132  
C 133  
C 138  
C 139  
C 144  
C 145  
C 148  
C 151  
C 152  
C 186  
C 191  
C 192  
C 241  
C 274  
C 358  
C 364  
C 407  
C 412  
C 413  
C 417  
C 421  
C 461  
C 493  
C 548  
C 607  
C 638  
C 155  
C 156  
C 166  
C 168  
EEFCD0D101ER  
CAPACITOR, 2V, 100µF  
3
EEFCX0D221R  
F1G1H270A451  
CAPACITOR, 2V, 220µF  
CAPACITOR, 50V, 27pF  
1
2
F1H1A1050015  
CAPACITOR, 10V, 1µF  
27  
F1G1H3R3A475  
F1J0J106A016  
CAPACITOR, 50V, 3.3pF  
CAPACITOR, 6.3V, 10µF  
2
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
C 170  
C 172  
C 175  
C 306  
C 307  
C 309  
C 310  
C 375  
C 376  
C 456  
C 547  
C 561  
C 181  
C 258  
C 187  
C 408  
C 411  
C 245  
C 246  
C 259  
C 328  
C 329  
C 330  
C 331  
C 332  
C 619  
C 620  
C 336  
C 365  
C 396  
C 397  
C 422  
C 342  
C 351  
C 524  
C 543  
C 568  
C 639  
C 383  
C 393  
C 492  
C 515  
C 518  
C 533  
C 534  
C 536  
C 544  
C 552  
C 559  
C 562  
F1G1H101A451  
CAPACITOR, 50V, 100pF  
10  
F1G1H6R0A452  
F1G1H5R0A452  
CAPACITOR, 50V, 6pF  
CAPACITOR, 50V, 5pF  
2
3
EEFUD0J151ER  
CAPACITOR, 6.3V, 150µF  
2
F1G1H7R0A452  
F1J1E105A080  
CAPACITOR, 50V, 7pF  
CAPACITOR, 25V, 1µF  
1
7
ECJ2FF1A106Z  
F1J0J475A009  
CAPACITOR, 10V, 10µF  
CAPACITOR, 6.3V, 4.7µF  
5
6
F1J1A1050021  
F1H1H104A748  
CAPACITOR, 10V, 1µF  
CAPACITOR, 50V, 0.1µF  
1
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C 569  
C 599  
C 601  
C 602  
C 604  
C 606  
C 608  
C 609  
C 409  
C 590  
C 449  
C 479  
C 566  
C 489  
C 494  
C 496  
C 497  
C 498  
C 514  
C 532  
C 551  
C 558  
C 573  
C 600  
C 610  
C 516  
C 520  
C 538  
C 541  
C 564  
C 567  
C 521  
C 535  
C 539  
C 540  
C 565  
C 572  
C 546  
C 560  
C 571  
C 554  
C 555  
C 574  
C 592  
C 605  
C 611  
C 612  
C 613  
C 634  
C 635  
F1G1C473A004  
CAPACITOR, 16V, 0.047µF  
2
F1L3D102A003  
F1G1H471A450  
CAPACITOR, 2000V, 1000pF  
CAPACITOR, 50V, 470pF  
1
2
F1H1H223A748  
F1J1E334A081  
F1L1E106A017  
CAPACITOR, 50V, 0.022µF  
CAPACITOR, 25V, 0.33µF  
CAPACITOR, 25V, 10µF  
1
1
10  
F1H1H182A748  
F1G1H220A451  
CAPACITOR, 50V, 1800pF  
CAPACITOR, 50V, 22pF  
1
5
F1G1H221A495  
CAPACITOR, 50V, 220pF  
6
F1H1H103A748  
EEFCX0J101R  
CAPACITOR, 50V, 0.01µF  
CAPACITOR, 6.3V, 100µF  
3
2
EEFCD0G101ER  
F1G1A683A014  
F1G1H152A450  
DCUI1C106HDB  
CAPACITOR, 4V. 100µF  
CAPACITOR, 10V, 0.068µF  
CAPACITOR, 50V, 1500pF  
CAPACITOR, 16V, 10µF  
1
1
1
3
F1L0J4760005  
CAPACITOR, 6.3V, 47µF  
CAPACITOR, 6.3V, 180µF  
1
2
EEFUE0J181ER  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C 636  
C 637  
F1L0J107A016  
D4CC1103A038  
CAPACITOR, 6.3V, 100µF  
THERMISTOR  
1
2
CF 1  
CF 2  
CN 1  
CN 3  
CN 4  
CN 12  
CN 5  
CN 6  
CN 8  
CN 9  
CN 10  
CN 43  
CN 13  
CN 15  
CN 55  
CN 18  
CN 23  
CN 30  
CN 32  
CN 47  
CN 48  
CN 49  
CN 51  
CN 52  
CN 56  
CN 54  
D 1  
K1KB80A00101  
K1MML0B00004  
K1KA02AA0229  
CONNECTOR  
CONNECTOR  
CONNECTOR  
1
1
2
K1KBA0B00028  
K1KA20AA0261  
K1MMF4A00002  
K1KA13AA0268  
K1MN50AA0018  
CONNECTOR  
CONNECTOR  
CONNECTOR  
CONNECTOR  
CONNECTOR  
1
1
1
1
2
K1FY180BA001  
K1FB104B0047  
CONNECTOR  
CONNECTOR  
1
2
K1MN40BA0059  
K1KA03AA0263  
K1MMC4B00012  
K1KB30A00172  
K1MN16AA0018  
K1MN40AA0018  
CONNECTOR  
CONNECTOR  
CONNECTOR  
CONNECTOR  
CONNECTOR  
CONNECTOR  
1
1
1
1
1
2
K1KA08AA0266  
K1MN12AA0018  
CONNECTOR  
CONNECTOR  
1
2
K1KA06A00454  
MA2J72900L  
CONNECTOR  
DIODE  
1
6
D 2  
D 3  
D 19  
D 24  
D 25  
D 4  
B0JDBE000002  
DIODE  
4
D 51  
D 57  
D 59  
D 5  
B0KB00000044  
B0ADCJ000041  
DIODE  
DIODE  
2
D 7  
D 9  
11  
D 10  
D 11  
D 12  
D 13  
D 14  
D 15  
D 16  
D 17  
D 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D 62  
D 27  
D 29  
D 52  
D 53  
D 31  
D 34  
D 36  
D 37  
D 39  
D 32  
D 35  
D 38  
D 41  
D 43  
D 44  
D 46  
D 47  
D 45  
D 48  
D 49  
D 50  
D 54  
D 55  
D 56  
D 58  
F 2  
B0JCCE000008  
B0JCPD000023  
DIODE  
DIODE  
1
3
B0JCMD000010  
DIODE  
5
B0ADCJ000025  
MAZ80510ML  
DIODE  
DIODE  
3
5
MAZ80620ML  
B2ABAM000002  
MA3S132E0L  
MA2S111-TX  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE  
FUSE, 5A  
1
1
1
1
1
1
1
1
2
MAZ81200ML  
MAZ81800ML  
DED10QS04TL  
B0JDRE000007  
K5H502Z00003  
F 3  
F 4  
K5H202Z00005  
FUSE, 2A  
3
F 5  
F 6  
IC 1  
C0JBAZ002592  
C3ABSG000030  
IC, CLOCK GENERATOR  
IC, DDR2 SDRAM  
1
4
IC 3  
IC 5  
IC 7  
IC 9  
IC 10  
IC 11  
IC 12  
IC 13  
IC 14  
IC 15  
IC 16  
IC 17  
IC 18  
IC 19  
IC 20  
IC 22  
IC 23  
IC 24  
C0DBZHG00043  
C1DB00001361  
C0ABZA000047  
C1DB00001159  
C1BB00000868  
C1DB00001362  
C0CBCBC00137  
C0DBALH00003  
IC, USB POWER CONTROL  
IC, LSI  
1
1
1
1
1
1
1
3
IC, AMP  
IC, PERIPHERAL LSI  
IC, AC97 CODEC  
IC, LSI  
IC, REGULATOR  
IC  
C0JBZZ000327  
DA2205IDBLET  
C1ZBZ0002759  
C0ZBZ0000978  
IC, THERMAL SENSOR  
1
1
1
1
IC, BIPOLAR  
IC  
IC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IC 25  
IC 26  
IC 27  
IC 28  
IC 29  
IC 30  
IC 31  
IC 32  
IC 33  
IC 34  
IC 35  
IC 36  
IC 39  
IC 40  
IC 41  
IC 42  
IC 43  
IC 44  
IC 45  
IC 46  
IC 47  
IC 48  
IC 49  
IC 50  
IC 62  
IC 63  
IC 113  
IC 115  
IC 603  
IC 64  
IC 73  
IC 78  
IC 90  
IC 95  
IC 96  
IC 97  
IC 109  
IC 600  
IC 99  
IC 107  
IC 100  
IC 101  
IC 102  
IC 103  
IC 108  
IC 105  
IC 111  
IC 106  
IC 201  
IC 602  
C0CBCBC00181  
C1BB00001025  
C0JBAS000215  
C3EBFC000056  
C1CB00002268  
C3FBLC000040  
C2CBJA000003  
C0JBAN000235  
C0JBAZ002372  
C0JBAZ002346  
IC  
1
1
1
1
1
1
1
1
1
2
IC, AUDIO AMP  
IC, GATE LOGIC  
IC, EEPROM  
IC, SECURITY CHIP  
IC, FLASH MEMORY  
IC, MICON  
IC, LOGIC  
IC, LOGIC  
IC, LOGIC  
C0DBAFH00035  
C0DBEFH00002  
C0EBE0000333  
C0EBE0000460  
IC  
1
1
1
3
IC, REGULATOR  
IC  
IC  
C0EBH0000457  
C0DBDJH00009  
C0EBH0000336  
IC  
1
1
2
IC, LINEAR  
IC  
C2GBC0000257  
C1DB00001476  
C1DB00001359  
C0JBAE000306  
C0JBAB000622  
IC, CPU  
1
1
1
1
4
IC, CHIP SET  
IC, CHIP SET  
IC, 1 GATE LOGIC  
IC, 1 GATE LOGIC  
C1DB00001179  
C0JBAB000619  
C0JBAA000347  
IC, LSI  
1
1
7
IC, GATE LOGIC  
IC, 1 GATE LOGIC  
C0JBAC000339  
IC, LOGIC  
2
C0CBCAC00161  
C0DBEFE00003  
C0JBAA000348  
IC  
1
1
3
IC  
IC, 1 GATE LOGIC  
C0ABBA000093  
C0JBAC000338  
C0JBAD000182  
IC, OP AMP  
IC, GATE LOGIC  
IC, LOGIC  
2
2
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
JK 1  
JK 2  
JK 3  
L 1  
K2HC103B0197  
K2HC103B0198  
K2EZ2B000046  
G1C100Z00013  
JK  
1
1
1
2
JK  
JK  
INDUCTOR  
L 2  
L 3  
G1C1R0Z00002  
INDUCTOR  
5
L 4  
L 5  
L 7  
L 8  
L 6  
G1C91NM00001  
J0JJC0000015  
J0MAB0000116  
INDUCTOR  
INDUCTOR  
INDUCTOR  
1
1
2
L 9  
L 10  
L 13  
L 11  
L 12  
L 14  
L 15  
L 18  
L 29  
L 16  
L 17  
L 19  
L 20  
L 21  
L 23  
L 24  
L 25  
L 26  
L 27  
L 28  
L 32  
L 33  
L 35  
L 36  
L 37  
L 38  
L 39  
L 40  
DDB5Z031J-L  
INDUCTOR  
6
J0MAB0000169  
DDB5Z021C-Y  
INDUCTOR  
INDUCTOR  
2
6
J0JCC0000078  
INDUCTOR  
3
ETQP4LR56WFC  
G1C4R7MA0022  
INDUCTOR  
INDUCTOR  
1
3
DDAZS100MT3T  
INDUCTOR  
2
J0JKC0000007  
G1A160H00001  
D4FB1R100009  
INDUCTOR  
INDUCTOR  
1
1
2
PA 1  
PA 2  
Q 1  
UNR9214J0L  
TRANSISTOR  
20  
Q 2  
Q 6  
Q 9  
Q 10  
Q 11  
Q 14  
Q 18  
Q 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Q 39  
Q 105  
Q 106  
Q 108  
Q 114  
Q 121  
Q 131  
Q 132  
Q 133  
Q 134  
Q 141  
Q 3  
DETA144EETL  
TRANSISTOR  
7
Q 58  
Q 100  
Q 103  
Q 122  
Q 135  
Q 136  
Q 4  
B1DDED000004  
B1MBEDA00017  
TRANSISTOR  
TRANSISTOR  
6
7
Q 12  
Q 129  
Q 130  
Q 137  
Q 138  
Q 5  
Q 71  
Q 76  
Q 86  
Q 93  
Q 94  
Q 99  
Q 7  
UNR9213J0L  
TRANSISTOR  
21  
Q 8  
Q 23  
Q 53  
Q 54  
Q 70  
Q 81  
Q 82  
Q 95  
Q 96  
Q 101  
Q 102  
Q 107  
Q 109  
Q 123  
Q 124  
Q 125  
Q 126  
Q 127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Q 128  
Q 139  
Q 13  
Q 17  
Q 19  
Q 22  
Q 25  
Q 41  
Q 42  
Q 47  
Q 48  
Q 50  
Q 140  
Q 15  
Q 16  
Q 56  
Q 57  
Q 72  
Q 77  
Q 78  
Q 24  
Q 26  
Q 44  
Q 45  
Q 49  
Q 55  
Q 89  
Q 90  
Q 98  
Q 117  
Q 27  
Q 29  
Q 30  
Q 32  
Q 34  
Q 36  
Q 40  
Q 51  
Q 60  
Q 79  
Q 80  
Q 63  
Q 64  
Q 83  
Q 84  
Q 87  
Q 88  
Q 104  
Q 110  
Q 112  
B1DHDC000028  
TRANSISTOR  
11  
B1CFGD000004  
TRANSISTOR  
7
XP0421300L  
TRANSISTOR  
10  
XP0411300L  
TRANSISTOR  
6
UNR9111J0L  
2SB0766ARL  
B1DBGD000006  
TRANSISTOR  
TRANSISTOR  
TRANSISTOR  
1
1
3
B1DFGD000032  
TRANSISTOR  
2
B1CFGD000003  
B1MBEDA00018  
B1GKCFJN0004  
TRANSISTOR  
TRANSISTOR  
TRANSISTOR  
1
1
2
XP0421400L  
TRANSISTOR  
TRANSISTOR  
1
2
B1DHFD000015  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Q 111  
Q 116  
Q 118  
Q 119  
Q 113  
Q 115  
Q 120  
R 1  
B1CFGD000016  
TRANSISTOR  
4
B1MBEDA00008  
B1DHDD000031  
TRANSISTOR  
TRANSISTOR  
1
2
ERJ2GEJ681X  
RESISTOR, 1/16W, 680Ω  
2
3
R 188  
R 2  
ERJ2RKF27R4X  
RESISTOR, 1/16W, 27.4Ω  
R 15  
R 16  
R 4  
ERJ2RKF54R9X  
RESISTOR, 1/16W, 54.9Ω  
5
R 17  
R 18  
R 35  
R 36  
R 5  
ERJ2RKF39R2X  
ERJ2GEJ151X  
ERJ3GEY0R00V  
RESISTOR, 1/16W, 39.2Ω  
RESISTOR, 1/16W, 150Ω  
RESISTOR, 1/16W, 0Ω  
1
1
6
R 6  
R 11  
R 289  
R 291  
R 364  
R 365  
R 628  
R 12  
ERJ2RKF2000X  
ERJ2GEJ560X  
RESISTOR, 1/16W, 200Ω  
2
R 43  
R 13  
RESISTOR, 1/16W, 56Ω  
14  
R 14  
R 27  
R 29  
R 31  
R 32  
R 125  
R 142  
R 144  
R 145  
R 146  
R 147  
R 178  
R 197  
R 23  
ERJ3GEYJ100V  
RESISTOR, 1/16W, 10Ω  
5
R 483  
R 522  
R 541  
R 568  
R 24  
ERJ2RHD102X  
ERJ2RKF2001X  
RESISTOR, 1/16W, 1KΩ  
3
1
R 220  
R 542  
R 25  
RESISTOR, 1/16W, 2KΩ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R 26  
ERJ2GEJ562X  
RESISTOR, 1/16W, 5.6KΩ  
6
R 208  
R 609  
R 610  
R 611  
R 619  
R 28  
ERJ2GEJ750X  
ERJ2RKF2210X  
RESISTOR, 1/16W, 75Ω  
1
2
R 33  
RESISTOR, 1/16W, 221Ω  
R 39  
R 34  
ERJ2RKF1000X  
ERJ2RKF24R9X  
RESISTOR, 1/16W, 100Ω  
3
5
R 40  
R 42  
R 37  
RESISTOR, 1/16W, 24.9Ω  
R 38  
R 61  
R 163  
R 173  
R 41  
ERJ2GE0R00X  
RESISTOR, 1/16W, 0Ω  
45  
R 135  
R 161  
R 166  
R 168  
R 179  
R 180  
R 232  
R 244  
R 272  
R 274  
R 287  
R 290  
R 333  
R 334  
R 347  
R 349  
R 361  
R 399  
R 406  
R 418  
R 426  
R 444  
R 449  
R 455  
R 456  
R 463  
R 492  
R 496  
R 498  
R 499  
R 501  
R 506  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R 513  
R 525  
R 594  
R 653  
R 655  
R 713  
R 714  
R 715  
R 716  
R 717  
R 718  
R 726  
R 46  
ERJ2RKF80R6X  
ERJ2GEJ103X  
RESISTOR, 1/16W, 80.6Ω  
2
R 47  
R 48  
RESISTOR, 1/16W, 10KΩ  
76  
R 52  
R 62  
R 114  
R 115  
R 124  
R 130  
R 131  
R 152  
R 157  
R 159  
R 162  
R 177  
R 182  
R 209  
R 225  
R 228  
R 243  
R 270  
R 273  
R 277  
R 278  
R 286  
R 298  
R 299  
R 301  
R 302  
R 304  
R 308  
R 315  
R 316  
R 319  
R 332  
R 337  
R 343  
R 345  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R 356  
R 358  
R 359  
R 376  
R 377  
R 379  
R 383  
R 384  
R 385  
R 408  
R 410  
R 423  
R 431  
R 453  
R 454  
R 458  
R 459  
R 461  
R 462  
R 471  
R 473  
R 474  
R 476  
R 477  
R 479  
R 484  
R 487  
R 507  
R 516  
R 521  
R 526  
R 540  
R 545  
R 546  
R 567  
R 573  
R 612  
R 613  
R 634  
R 635  
R 49  
ERJ2GEJ222X  
RESISTOR, 1/16W, 2.2KΩ  
9
R 50  
R 231  
R 261  
R 262  
R 265  
R 266  
R 371  
R 373  
R 51  
ERJ2GEJ101X  
RESISTOR, 1/16W, 100Ω  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R 158  
R 160  
R 176  
R 184  
R 235  
R 236  
R 281  
R 402  
R 405  
R 428  
R 460  
R 478  
R 596  
R 598  
R 599  
R 600  
R 601  
R 602  
R 53  
ERJ2RKF1500X  
RESISTOR, 1/16W, 150Ω  
6
R 54  
R 55  
R 258  
R 259  
R 260  
R 57  
ERJ2RKF1501X  
ERJ2GEJ390X  
RESISTOR, 1/16W, 1.5KΩ  
1
2
R 58  
RESISTOR, 1/16W, 39Ω  
R 59  
R 60  
ERJ2RKF2550X  
ERJ6GEYJ100V  
ERJ2GEJ2R2X  
RESISTOR, 1/16W, 255Ω  
RESISTOR, 1/10W, 10Ω  
RESISTOR, 1/16W, 2.2Ω  
1
1
2
R 63  
R 72  
R 96  
R 79  
ERJ2GEJ330X  
RESISTOR, 1/16W, 33Ω  
33  
R 80  
R 81  
R 82  
R 83  
R 89  
R 93  
R 94  
R 98  
R 99  
R 101  
R 102  
R 103  
R 104  
R 105  
R 110  
R 112  
R 113  
R 151  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R 171  
R 198  
R 199  
R 200  
R 201  
R 202  
R 203  
R 204  
R 205  
R 206  
R 338  
R 339  
R 400  
R 593  
R 86  
ERJ2GEJ102X  
RESISTOR, 1/16W, 1KΩ  
10  
R 186  
R 215  
R 242  
R 321  
R 322  
R 370  
R 372  
R 409  
R 475  
R 91  
D1H83304A024  
ERJ2GEJ1R0X  
ERJ2GEJ120X  
RESISTOR ARRAY  
2
2
4
R 100  
R 97  
RESISTOR, 1/16W, 1Ω  
RESISTOR, 1/16W, 12Ω  
R 183  
R 107  
R 108  
R 109  
R 111  
R 126  
R 127  
R 128  
R 129  
R 138  
R 150  
R 153  
R 192  
R 303  
R 317  
R 323  
R 348  
R 467  
R 149  
R 154  
R 210  
R 211  
R 248  
ERJ2GEJ201X  
D1H81034A024  
RESISTOR, 1/16W, 200Ω  
4
9
RESISTOR ARRAY  
ERJ2GEJ104X  
RESISTOR, 1/16W, 100KΩ  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R 249  
R 263  
R 268  
R 276  
R 279  
R 280  
R 283  
R 288  
R 305  
R 335  
R 369  
R 378  
R 381  
R 382  
R 404  
R 413  
R 414  
R 420  
R 465  
R 480  
R 500  
R 502  
R 517  
R 552  
R 614  
R 615  
R 660  
R 164  
R 165  
R 189  
R 190  
R 191  
R 252  
R 324  
R 327  
R 328  
R 329  
R 331  
R 466  
R 468  
R 469  
R 472  
R 167  
R 226  
R 318  
R 360  
R 380  
R 398  
R 422  
R 427  
ERJ2RKF22R6X  
DEARA8AJ103M  
RESISTOR, 1/16W, 22.6Ω  
1
RESISTOR ARRAY  
14  
ERJ2GEJ472X  
RESISTOR, 1/16W, 4.7KΩ  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R 432  
R 629  
R 637  
R 638  
R 169  
R 170  
R 227  
R 172  
R 254  
R 255  
R 429  
R 581  
R 582  
R 583  
R 584  
R 585  
R 586  
R 587  
R 588  
R 185  
R 207  
R 229  
R 240  
R 241  
R 300  
R 451  
R 452  
R 576  
R 212  
R 213  
R 250  
R 251  
R 264  
R 269  
R 336  
R 416  
R 417  
R 563  
R 617  
R 658  
R 659  
R 221  
R 366  
R 389  
R 390  
R 230  
R 547  
R 575  
R 233  
R 239  
ERJ2GEJ203X  
ERJ2GEJ106X  
RESISTOR, 1/16W, 20KΩ  
1
2
RESISTOR, 1/16W, 10MΩ  
ERJ2GEJ105X  
RESISTOR, 1/16W, 1MΩ  
12  
ERJ6GEYJ680V  
ERJ2RHD103X  
RESISTOR, 1/10W, 68Ω  
1
8
RESISTOR, 1/16W, 10KΩ  
ERJ2GEJ474X  
RESISTOR, 1/16W, 470KΩ  
13  
ERJ2GEJ471X  
RESISTOR, 1/16W, 470Ω  
4
ERJ2RHD303X  
ERJ2RHD104X  
RESISTOR, 1/16W, 30KΩ  
3
5
RESISTOR, 1/16W, 100KΩ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R 569  
R 640  
R 641  
R 234  
R 238  
R 237  
R 245  
R 246  
R 247  
R 253  
R 256  
R 257  
R 271  
R 294  
R 295  
R 518  
R 519  
R 537  
R 538  
R 549  
R 550  
R 564  
R 565  
R 577  
R 578  
R 306  
R 307  
R 325  
R 326  
R 330  
R 342  
R 357  
R 375  
R 497  
R 562  
R 606  
R 646  
R 650  
R 651  
R 656  
R 657  
R 344  
R 346  
R 354  
R 355  
R 665  
R 666  
R 667  
R 668  
R 669  
ERJ2RKD154X  
RESISTOR, 1/16W, 150KΩ  
2
D1ZZ00000046  
D1HGR008A001  
RESISTOR, 1W, 5mΩ  
1
3
RESISTOR ARRAY  
DEARA8CJ330M  
D1H8R0040009  
D1H81014A024  
D1H81044A024  
ERJ2GEJ100X  
RESISTOR ARRAY  
RESISTOR ARRAY  
RESISTOR ARRAY  
RESISTOR ARRAY  
RESISTOR, 1/16W, 10Ω  
1
1
1
1
12  
ERJ2RKF3010X  
DEARA8AJ472M  
RESISTOR, 1/16W, 301Ω  
2
2
RESISTOR ARRAY  
DEARA8AJ102M  
ERJ2GEJ473X  
RESISTOR ARRAY  
1
RESISTOR, 1/16W, 47KΩ  
11  
ERJ2GEJ273X  
ERJ2GEJ220X  
RESISTOR, 1/16W, 27KΩ  
1
RESISTOR, 1/16W, 22Ω  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R 670  
R 671  
R 672  
R 673  
R 674  
R 675  
R 676  
R 677  
R 678  
R 679  
R 680  
R 681  
R 682  
R 683  
R 684  
R 685  
R 686  
R 687  
R 688  
R 350  
R 351  
R 352  
R 353  
R 362  
R 363  
R 367  
R 368  
R 572  
R 603  
R 374  
R 386  
R 387  
R 388  
R 391  
R 396  
R 397  
R 551  
R 392  
R 56  
ERJ2GEJ363X  
RESISTOR, 1/16W, 36KΩ  
3
ERJ2GEJ333X  
ERJ2GEJ223X  
RESISTOR, 1/16W, 33KΩ  
1
6
RESISTOR, 1/16W, 22KΩ  
ERJ2GEJ683X  
ERJ2GEJ221X  
RESISTOR, 1/16W, 68KΩ  
1
7
RESISTOR, 1/16W, 220Ω  
D1H82204A024  
D1H82224A024  
ERJ2GEJ511X  
RESISTOR ARRAY  
1
1
3
RESISTOR ARRAY  
R 393  
R 394  
R 395  
R 421  
R 430  
R 433  
R 434  
R 435  
R 436  
R 437  
R 438  
RESISTOR, 1/16W, 510Ω  
ERJ2GEJ334X  
ERJ2RKF4871X  
ERJ2RKF49R9X  
RESISTOR, 1/16W, 330KΩ  
RESISTOR, 1/16W, 4.87KΩ  
RESISTOR, 1/16W, 49.9Ω  
1
1
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
R 439  
R 440  
R 445  
R 450  
R 481  
R 482  
R 486  
R 489  
R 490  
R 491  
R 493  
R 494  
R 495  
R 503  
R 647  
R 648  
R 505  
R 510  
R 511  
R 535  
R 554  
R 556  
R 579  
R 520  
R 539  
R 566  
R 523  
R 524  
R 536  
R 553  
R 555  
R 561  
R 580  
R 632  
R 543  
R 571  
R 544  
R 548  
R 557  
R 558  
R 559  
R 560  
R 621  
R 570  
R 574  
R 604  
R 605  
R 607  
R 608  
R 616  
D1H87504A024  
ERJ2RKF5602X  
ERJ2RKF1600X  
ERJ2RKF2150X  
ERJ2RKF7501X  
ERJ2RKF4531X  
ERJ2RKF2400X  
ERJ2RKF5101X  
ERJ2RKF5103X  
ERJ2RKF1100X  
ERJ2RKF5361X  
ERJ3GEYJ3R3V  
RESISTOR ARRAY  
1
1
1
1
1
1
1
1
1
1
1
3
RESISTOR, 1/16W, 56KΩ  
RESISTOR, 1/16W, 160Ω  
RESISTOR, 1/16W, 215Ω  
RESISTOR, 1/16W, 7.5KΩ  
RESISTOR, 1/16W, 4.53KΩ  
RESISTOR, 1/16W, 240Ω  
RESISTOR, 1/16W, 5.1KΩ  
RESISTOR, 1/16W, 510KΩ  
RESISTOR, 1/16W, 110Ω  
RESISTOR, 1/16W, 5.36KΩ  
RESISTOR, 1/16W, 3.3Ω  
D1JB3M00A001  
D1BDR0220001  
RESISTOR, 1W, 3mΩ  
1
6
RESISTOR, 1/8W, 0.022Ω  
ERJ2GEJ153X  
RESISTOR, 1/16W, 15KΩ  
3
ERJ2RHD472X  
ERJ2RHD153X  
D1BDR0330001  
RESISTOR, 1/16W, 4.7KΩ  
RESISTOR, 1/16W, 15KΩ  
RESISTOR, 1/8W, 0.033Ω  
1
1
6
ERJ2RHD203X  
ERJ2RHD243X  
ERJ2RKF5601X  
RESISTOR, 1/16W, 20KΩ  
RESISTOR, 1/16W, 24KΩ  
RESISTOR, 1/16W, 5.6KΩ  
2
2
2
ERJ2RKF1302X  
D1BDR0470002  
RESISTOR, 1/16W, 13KΩ  
1
2
RESISTOR, 1/8W, 0.047Ω  
ERJ2RHD622X  
ERJ2RHD132X  
ERJ6GEYJ222V  
RESISTOR, 1/16W, 6.2KΩ  
RESISTOR, 1/16W, 1.3KΩ  
RESISTOR, 1/10W, 2.2KΩ  
1
1
2
ERJ3GEYJ562V  
D1BDR4700001  
ERJ2RKD114X  
RESISTOR, 1/16W, 5.6KΩ  
RESISTOR, 1/8W, 0.47Ω  
RESISTOR, 1/16W, 110KΩ  
1
1
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
R 618  
R 620  
R 622  
R 626  
R 627  
R 630  
R 631  
R 636  
R 639  
R 652  
R 654  
R 642  
R 643  
R 644  
R 645  
R 661  
R 662  
R 663  
R 664  
R 689  
R 690  
R 691  
R 692  
R 720  
R 721  
R 722  
R 723  
R 724  
R 725  
ERJ2RHD3652X  
ERJ2GEJ154X  
D1BDR0680001  
ERA3EKB1623V  
ERA3EEB1692V  
ERJ2RHD302X  
RESISTOR, 1/16W, 36.5KΩ  
RESISTOR, 1/16W, 150KΩ  
RESISTOR, 1/8W, 0.068Ω  
RESISTOR, 1/16W, 162KΩ  
RESISTOR, 1/16W, 16.9KΩ  
RESISTOR, 1/16W, 3KΩ  
1
1
1
1
1
2
ERJ2GEJ564X  
RESISTOR, 1/16W, 560KΩ  
4
ERJ2RHD333X  
ERJ2RHD473X  
D1HG2208A001  
RESISTOR, 1/16W, 33KΩ  
RESISTOR, 1/16W, 47KΩ  
RESISTOR ARRAY  
2
2
8
D1HA56080001  
RESISTOR ARRAY  
6
SP 1  
DFHD05H009ZA  
DFHD05H008ZA  
SPACER  
SPACER  
1
2
SP 2  
SP 3  
T 1  
G5BYC0000010  
TRANCE  
2
T 2  
X 1  
H0J143500040  
H0J327200115  
H0J250500025  
OSCILLATOR, 14.318MHz  
OSCILLATOR, 32.768KHz  
OSCILLATOR, 25MHz  
1
1
2
X 2  
X 3  
X 4  
X 5  
H2D800400015  
F1G1H101A451  
OSCILLATOR, 8MHz  
1
8
IO PCB  
C 701  
C 702  
C 703  
C 704  
C 705  
C 706  
C 708  
C 710  
C 707  
C 709  
CAPACITOR, 50V, 100pF  
F1G1H221A450  
CAPACITOR, 50V, 220pF  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C 711  
C 712  
C 713  
C 714  
C 715  
C 716  
C 717  
C 718  
C 719  
C 720  
C 721  
C 722  
C 723  
C 724  
C 725  
C 726  
C 727  
C 730  
C 732  
C 733  
C 734  
C 728  
C 729  
C 731  
C 735  
CN 700  
CN 702  
CN 703  
CN 704  
D 700  
L 700  
L 701  
L 702  
L 703  
L 704  
L 705  
L 706  
L 707  
L 708  
L 709  
L 710  
L 711  
L 712  
L 713  
L 714  
PS 700  
R 704  
R 705  
R 706  
R 707  
F1G1H330A451  
CAPACITOR, 50V, 33pF  
3
F1G1C104A042  
K1MN50AA0018  
K1FB115BA014  
K1FB125BA015  
K1FA209BA004  
MA3X74800L  
CAPACITOR, 16V, 0.1µF  
CONNECTOR  
CONNECTOR  
CONNECTOR  
CONNECTOR  
DIODE  
1
1
1
1
1
1
8
DDB5Z021G-Y  
INDUCTOR  
DDB5Z024E-L  
INDUCTOR  
7
K5J1AB000001  
ERJ2GEJ472X  
POLY SW  
1
9
RESISTOR, 1/16W, 4.7KΩ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R 708  
R 709  
R 710  
R 711  
R 712  
R 713  
ERJ2GEJ102X  
RESISTOR, 1/16W, 1KΩ  
8
R 714  
R 715  
R 716  
R 717  
R 718  
R 719  
R 720  
R 751  
ERJ3GEYJ102V  
RESISTOR, 1/16W, 1KΩ  
4
R 752  
R 753  
R 754  
LED PCB  
CN 980  
LD 1  
K1MN10AA0018  
B3ABB0000210  
CONNECTOR  
LED  
1
5
LD 2  
LD 3  
LD 6  
LD 7  
LD 5  
B3ADB0000065  
B3AGB0000040  
LED  
LED  
1
1
LD 41  
KBD PCB  
C 930  
F1G1C104A042  
K1MN50BA0059  
K1MN16BA0059  
K1MY07BA0096  
K1MY13BA0102  
K1MY16BA0097  
K1QZA1AE0001  
CAPACITOR, 16V, 0.1µF  
CONNECTOR  
1
1
1
1
1
1
4
CN 930  
CN 931  
CN 934  
CN 933  
CN 932  
CN 950  
CN 951  
CN 952  
CN 953  
IC 930  
TP PCB  
C 800  
CONNECTOR  
CONNECTOR  
CONNECTOR  
CONNECTOR  
CONNECTOR  
C0JBAA000402  
F1H1A1050015  
F1G1H681A450  
IC  
1
2
2
CAPACITOR, 10V, 1µF  
CAPACITOR, 50V, 680pF  
C 804  
C 801  
C 802  
C 803  
F1G1C104A042  
K1MN16BA0059  
K1MY04BA0104  
K1MN10BA0059  
DED1SS355T17  
C1DB00001417  
B1GKCFJN0004  
CAPACITOR, 16V, 0.1µF  
CONNECTOR  
1
1
1
1
1
1
2
CN 800  
CN 801  
CN 803  
D 800  
CONNECTOR  
CONNECTOR  
DIODE  
IC 800  
Q 800  
IC, FLAT PAD CONTROLLER  
TRANSISTOR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Q 801  
R 800  
ERJ2GEJ224X  
ERJ2GEJ822X  
RESISTOR, 1/16W, 220KΩ  
1
2
R 801  
RESISTOR, 1/16W, 8.2KΩ  
R 803  
R 802  
ERJ2GEJ273X  
ERJ2GEJ105X  
ERJ2GEJ222X  
RESISTOR, 1/16W, 27KΩ  
RESISTOR, 1/16W, 1MΩ  
RESISTOR, 1/16W, 2.2KΩ  
1
1
2
R 804  
R 805  
R 806  
RA 800  
SW 800  
SW 801  
X 800  
D1H81034A024  
EVQPLDA15  
RESISTOR ARRAY  
SW  
1
2
H2D400400012  
K0ZZ00000620  
OSCILLATOR, 4MHz  
SW  
1
1
IO FPC  
SW 1  
SW-LED FPC  
CN 950  
LD 8  
K1KA06A00454  
B3ABB0000210  
B3AGB0000040  
B3ADB0000065  
EVQPLDA15  
CONNECTOR  
1
1
1
1
1
LED  
LED  
LED  
SW  
LD 72  
LD 73  
SW 950  
EXT ANT PCB  
CN 1  
K1QZA1AE0001  
K1QZB1AA0020  
CONNECTOR  
CONNECTOR  
2
1
CN 2  
CN 3  
FDD PCB  
C 780  
F1H1H104A731  
K1KAA0AA0243  
K1MY26BA0008  
C0JBAB000675  
CAPACITOR,  
CONNECTOR  
CONNECTOR  
IC  
1
1
1
1
CN 760  
CN 761  
IC 760  
SD-CN PCB  
C 1  
F1H1H104A748  
K1NA09E00073  
K1MN12BA0059  
B3ACB0000020  
ERJ3GEYJ101V  
CAPACITOR,  
1
1
1
1
1
CN 1  
CONNECTOR  
CONNECTOR  
DIODE  
CN 2  
D 1  
R 1  
RESISTOR, 1/16W, 100Ω  
Download from Www.Somanuals.com. All Manuals Search And Download.  

LaCie Computer Drive Brick User Manual
Land Pride Spreader PS25120 User Manual
LG Electronics Cooktop MFL62725501 User Manual
Linear Satellite Radio DXT 61 EC User Manual
Link electronic Switch 812 OP D User Manual
LOREX Technology DVR L3104 User Manual
Lowrance electronic SONAR X125 User Manual
Magnavox Portable Stereo System AZ 9055 User Manual
Mattel Doll BLL48 0520G1 User Manual
M Audio Cassette Player 96 User Manual