User guide
S M A R T . V E R Y S M A R T .
MAS-100 MINI HI-FI STEREO SYSTEM
R
Read this manual first!
Return
Congratulations on purchasing this Magnavox product.
your Warranty
We’ve included everything you need to get started.
If you have any problems, Magnavox Representatives can
help you get the most from your new product by explaining:
Registration Card
within 10 days
• Hookups,
Y
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-705-2000
Thank you for making Magnavox a part of your home!
Download from Www.Somanuals.com. All Manuals Search And Download.
£
2
3
4
2
™
¡
%
(
%
^
7
8
)
#
*
&
-
CD/CD R/
3CD
-
MINI HIFI STEREO SYSTEM
CD RW COMPATIBLE
C H A NG E R
STANDBY-ON
1
2
FM•AM
TAPE 1•2
TUNER
TAPE
3
4
^
%
CD 1
CD 2
CD 3
3 CD DIRECT PLAY
SEARCH/
TUNING
SEARCH/
TUNING
CD
OPEN•CLOSE
VOLUME
5
6
$
DSC
L
L
PREV•PRESET
DEMO STOP
NEXT•PRESET
DIM
DISC
PROGRAM CLOCK•TIMER
DIGITAL SOUND
CONTROL
CHANGE
DYNAMIC
BASS BOOST
DBB
#
@
7
8
9
FULL AUTO STOP
CONTINUOUS PLAY
DECK 1 PLAYBACK•RECORD
PLAYBACK DECK 2
0
!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
• Once your Magnavox purchase is
registered, you’re eligible to receive all
the privileges of owning a Magnavox
product.
• So complete and return theWarranty
Registration Card enclosed with your
purchase at once, and take advantage
of these important benefits.
Warranty
Owner
Model
Verification
Confirmation Registration
Registering your product
within 10 days confirms
your right to maximum
protection under the
Your completed Warranty Returning your Warranty
Registration Card serves
as verification of owner-
Registration Card right
away guarantees you’ll
ship in the event of prod- receive all the information
terms and conditions of
your Magnavox warranty.
uct theft or loss.
and special offers which
you qualify for as the
owner of your model.
Know these
For Customer Use
Enter below the Serial No. which is locat-
ed on the rear of the cabinet. Retain this
information for future reference.
safety symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Model No. _______________________
Serial No. ________________________
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indi-
cates uninsulated material
within your unit may cause
WARNING: TO PREVENT
FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
an electrical shock. For the safety of
everyone in your household, please do
not remove product covering.
CAUTION: To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.
The “exclamation point” calls
attention to features for
which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
MAC5097
4
Download from Www.Somanuals.com. All Manuals Search And Download.
x.com
Congratulations on your purchase,
and welcome to the “family!”
Dear Magnavox product owner:
Thank you for your confidence in Magnavox.You’ve selected one of the
best-built, best-backed products available today.And we’ll do everything in
our power to keep you happy with your purchase for many years to come.
As a member of the Magnavox “family,” you’re entitled to protection by
one of the most comprehensive warranties and outstanding service net-
works in the industry.
What’s more, your purchase guarantees you’ll receive all the information
and special offers for which you qualify, plus easy access to accessories
from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment
to your total satisfaction.
All of this is our way of saying welcome – and thanks for investing in a
Magnavox product.
Sincerely,
Lawrence J. Blanford
President and Chief Executive Officer
P.S. Remember, to get the most from your Magnavox product,
you must return your Warranty Registration Card within
10 days. So please mail it to us right now!
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
12.
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold with
the apparatus.When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
4. Follow all instructions.
5. Do not use this apparatus near
water.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer´s instructions.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
9. Do not defeat the
safety purpose of the
15.Battery usage CAUTION –To
prevent battery leakage which may result in
bodily injury, property damage, or damage
to the unit:
polarized or
grounding-type plug.
AC Polarized
Plug
A polarized plug has two blades with one
wider than the other.A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
G
G
G
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not used
for a long time.
10. Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
EL 6475-E004: 02/8
11.Only use attachments/accessories
specified by the manufacturer.
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English ------------------------------------------------ 8
Français -------------------------------------------- 33
Español --------------------------------------------- 59
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Information
Tape Operation/Recording
Supplied accessories ............................................ 9
Environmental information ................................ 9
Safety information ................................................ 9
Loading tape ........................................................ 21
Playing tapes ........................................................ 21
Rewinding/Fast forwarding ............................... 22
General information on recording ................. 22
Preparation for recording ................................ 22
One touch recording......................................... 22
CD Synchronized start recording .................. 22
Dubbing tapes ..................................................... 23
Preparations
Rear connections ........................................ 10–11
Power
Antennas connection
Speakers connection
Inserting batteries into the remote control. 11
Maintenance.............................................. 23
Controls
Controls on the system and remote
control .................................................................. 12
Clock/Timer
View clock............................................................ 24
Clock setting ....................................................... 24
Timer setting ................................................ 24–25
Deactivating the timer
Activating the timer
Sleep timer setting ............................................. 25
Specifications ........................................... 26
Troubleshooting ............................. 27–28
Basic Functions
Plug and Play ........................................................ 13
Demonstration mode........................................ 14
Switching the system on ................................... 14
Switching the system to standby mode ........ 14
Dim mode ............................................................ 14
Volume control ................................................... 14
Sound control ..................................................... 15
DSC (Digital Sound Control)
DBB (Dynamic Bass Boost)
CD Operation
Discs for playback .............................................. 16
Loading discs ....................................................... 16
Playing discs ......................................................... 17
Selecting a desired track/passage.................... 17
Replacing discs during playback ...................... 17
Repeat and Shuffle....................................... 17–18
Repeat play
Random play
Programming the disc tracks ........................... 18
Erasing the program .......................................... 18
Radio Reception
Tuning to radio stations .................................... 19
Storing preset radio stations .................... 19–20
Automatic preset programming
Manual preset programming
Tuning to preset radio stations ....................... 20
Erasing a preset radio station .......................... 20
8
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
This system complies with the FCC rules,
Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two
conditions:
– This device may not cause harmful
interference, and
– This device must accept any interference
received, including interference that may
cause undesired operation.
Safety information
G
Before operating the system, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your system is identical with the
voltage of your local power supply. If not, please
consult your dealer.
G
G
Place the system on a flat, hard and stable
surface.
Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
Supplied accessories
– 2 speaker boxes
– remote control
– AM loop antenna
– FM wire antenna
G
G
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
Environmental information
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
The lens may cloud over when the system is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the system in the warm environment until
the moisture evaporates.
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
G
G
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
AM loop
antenna
FM wire antenna
speaker
(right)
speaker
(left)
B
C
+
R
–
+
–
L
A
AC power cord
Rear connections
B Antennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals.Adjust the
position of the antenna for optimal reception.
The type plate is located at the rear of the
system.
A Power
AM Antenna
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
Fix the claw
to the slot
G
Position the antenna as far as possible from aTV,
VCR or other radiation source.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
FM Antenna
Inserting batteries into the
remote control
Insert two batteries type R03 or AAA (not
supplied) into the remote control with the
correct polarity as indicated by the "+" and
"-" symbols inside the battery compartment.
1
2
G
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
C Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to
"L", colored (marked) wire to "+" and black
(unmarked) wire to "-".
CAUTION!
– Remove batteries if they are exhausted
or will not be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
1
2
G
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes for remote control:
– First select the source you wish to control
by pressing one of the source select keys on
the remote control (for example CD 1/2/3,
TUNER).
– Then select the desired function (for
exampleÉ, í, ë).
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls (illustrations on page 3)
$ n
Controls on the system and
remote control
–
to connect headphones.
% MASTERVOLUME 3 4 (VOL +/-)
1 STANDBY ON y
–
to increase or decrease the volume.
–
to switch the system on or to standby mode.
2 TAPE (TAPE 1/2)
to select tape mode.
3 TUNER (FM•AM)
to select waveband : FM or AM.
4 CD 1 / CD 2 / CD 3 (CD 1/2/3)
to select disc tray 1, 2 or 3.
5 CD OPEN/CLOSE
to open or close the disc tray.
6 DISC CHANGE
to change disc(s).
7 DIGITAL SOUND CONTROL (DSC)
^ Mode Selection
PLAY•PAUSE ÉÅ
–
for CD ................. to start or interrupt playback.
for Plug & Play…(on the system only) to initiate
and start plug & play mode.
–
SEARCH/TUNING à
á
–
for CD ................. to search backward/forward.
forTuner ............. to tune to a lower or higher
radio frequency.
for Clock ............ (on the system only) to set the
hour.
STOP•CLEAR / DEMO STOP Ç
for CD ................. to stop playback or to clear a
program.
–
–
–
to select the desired sound effect :
JAZZ, ROCK,TECHNO or OPTIMAL.
8 DYNAMIC BASS BOOST (DBB)
to select the desired bass boost level.
forTuner ............. (on the system only) to stop
programming or to erase a
–
9 PROGRAM
selected preset.
for CD ................. to program disc tracks.
forTuner ............. to program preset radio stations.
for Clock ............ to select 12- or 24-hour clock
mode.
for Demo........... (on the system only) to activate/
deactivate the demonstration.
for Clock ............ (on the system only) to exit clock
setting or cancel timer.
forTimer............. to select CD program mode as
the wake up source.
for Plug & Play…(on the system only) to exit plug
& play mode.
0 Tape deck 1 operation
â .......................... to start recording.
É .......................... to start playback.
à / á............... to rewind or fast forward.
70........................ to stop playback/recording or to
open the tape door.
PREV í / NEXT ë (PRESET 4 / 3 )
for CD ................. to skip to the beginning of the
current, previous, or next track.
forTuner ............. to select a preset radio station.
for Clock ............ (on the system only) to set the
minute.
Å .......................... to interrupt playback or
recording.
& Display screen
–
to view the current status of the system.
! Tape deck 2 operation
É .......................... to start playback.
à / á............... to rewind or fast forward.
70........................ to stop playback or to open the
tape door.
* Disc tray
( REPEAT
–
to playback track(s)/disc(s)/program repeatedly.
) MUTE
–
to interrupt or resume sound reproduction.
Å .......................... to interrupt playback.
@ CLOCK•TIMER
¡ SHUFFLE
–
to playback all available discs and their tracks/
program in random order.
™ SLEEP
–
to view the clock, set the clock or set the timer.
# DIM
–
to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.
–
to activate/deactivate or set the sleep timer.
£ B
–
to switch the system to standby mode.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
STANDBY-ON
2
FM•AM
TAPE 1•2
TUNER
TAPE
CD 1
CD 2
CD 3
3 CD DIRECT PLAY
SEARCH/
TUNING
SEARCH/
TUNING
CD
OPEN•CLOSE
VOLUME
DSC
L
L
PREV•PRESET
DEMO STOP
NEXT•PRESET
DIM
DISC
PROGRAM CLOCK•TIMER
DIGITAL SOUND
CONTROL
CHANGE
DYNAMIC
BASS BOOST
DBB
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
To exit without storing the Plug and Play
Press Çon the system.
➜ If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main power again.
G
Plug and Play
Plug and Play allows you to store all available
radio stations automatically.
Notes:
– When the power is turned on, the disc tray may
open and close to initialize the system.
– If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA" will be
displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
First time setup/power up
1
2
When you turn on the main power, "AUTO
INSTALL- PRESS PLAY" is displayed.
PressÉÅ on the system to start installation.
➜ "INSTALL" is displayed, followed by "TUNER"
and "AUTO".
➜ PROG starts flashing.
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To reinstall Plug and Play
1
2
In Standby or Demonstration mode, press and
holdÉÅ on the system until "AUTO INSTALL
- PRESS PLAY" is displayed.
PressÉÅ again to start installation.
➜ All previously stored radio stations will be
replaced.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Dim mode
You can select the desired brightness for the
display.
Demonstration mode
The system has a demonstration mode that
shows the various available features.
G
In any source mode (except standby mode),
press DIM repeatedly to select : DIM 1, DIM 2,
DIM 3 or DIM OFF.
To activate the demonstration
G
G
In standby mode, press and holdÇon the
system until "WELCOME" is displayed.
➜ The demonstration will begin.
➜ DIM is shown, except for DIM OFF mode.
Brightness
Spectrum
Analyzer
DIM
mode
To deactivate the demonstration
Press and holdÇon the system until
"DEMO OFF" is displayed.
1
normal
half
off
on
off
on
2
➜ The system will switch to standby mode.
3
half
Note:
OFF
normal
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to standby mode.
Note:
– In standby mode, pressing DIM to select half or
full brightness for clock display.
Switching the system on
In standby/demonstration mode
Press STANDBY ON to switch on the last
selected source.
Volume control
G
G
G
Press MASTERVOLUME 3 or 4 (VOL +
or - on the remote control) to increase or
decrease the volume level.
Press CD 1/2/3, TUNER or
TAPE (TAPE 1/2).
To listen through the headphones
Connect the headphones plug to
the n socket at the front of the
system.
Press CD OPEN/CLOSE.
➜ The system will switch to CD mode.
G
Switching the system to standby
mode
➜ The speakers will be muted.
To switch off the volume temporarily
Press MUTE on the remote control.
➜ Playback will continue without sound and
"MUTE" is displayed.
In demonstration mode
Press and hold Ç on the system.
G
G
G
G
In any other source mode
Press STANDBY ON (or B on the remote
control).
To restore the volume, press MUTE again or
increase the volume level.
➜ The clock will appear on the display when the
system is in standby mode.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Sound control
DSC (Digital Sound Control)
The DSC feature enables you to enjoy special
sound effects that have preset equalizer settings,
which provide improved music reproduction.
G
Press DSC to select : JAZZ, ROCK,TECHNO or
OPTIMAL.
➜ The selected DSC is shown.
DBB (Dynamic Bass Boost)
There are three DBB settings to enhance the
bass response.
G
G
Press DBB repeatedly to select a bass boost
level.
➜ “DBB 1 (or 2/3)” and the respective bass
boost level are shown.
To deactivate DBB
Press DBB repeatedly until ““DBB OFF” is
displayed.
Note:
– Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce the
volume.
Automatic DSC-DBB selection
The best DBB setting is generated automatically
for each DSC selection. You can manually select
the DBB setting that best suits your listening
environment.
DSC
DBB
off
JAZZ
on (3)
on (3)
on (2)
ROCK
TECHNO
OPTIMAL
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
-
CD/CD R/
3CD
-
MINI HIFI STEREO SYSTEM
CD RW COMPATIBLE
C H A NG E R
STANDBY-ON
2
FM•AM
TAPE 1•2
TUNER
TAPE
CD 1
CD 2
CD 3
3 CD DIRECT PLAY
SEARCH/
TUNING
SEARCH/
TUNING
CD
OPEN•CLOSE
VOLUME
DSC
L
L
PREV•PRESET
DEMO STOP
NEXT•PRESET
DIM
DISC
PROGRAM CLOCK•TIMER
DIGITAL SOUND
CONTROL
CHANGE
DYNAMIC
BASS BOOST
DBB
IMPORTANT!
Loading discs
– This system is designed for regular discs.
Therefore, do not use any accessories such
as disc stabilizer rings or disc treatment
sheets, etc., which may jam the changer
mechanism.
1
2
Press CD OPEN/CLOSE to open the disc
tray.
Load up to two discs on the individual disc trays.
To load the third disc, press DISC CHANGE.
➜ The disc tray will rotate until the empty tray
is ready for loading.
– Do not load more than one disc into
each tray.
Discs for playback
This system can playback all digital audio CD,
finalized digital audio CD-Recordable (CDR)
discs and finalized digital audio CD-Rewritable
(CDRW)discs.
OPE
.
C
1
3
F
L
F
L
N
3
Press CD OPEN/CLOSE to close the disc
tray.
➜ "READING" is displayed. The selected disc
tray, total number of tracks and the playing time
will appear on the display.
Notes:
– Load the discs with the label side facing up.
– To ensure good system performance, wait until
the disc tray completely reads the disc(s) before
proceeding.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
To skip to the beginning of the current
track during playback
Playing discs
G
Press í once.
a disc is loaded in the disc tray
the current selected disc tray is empty
Replacing discs during playback
the current selected disc tray is loaded
or playing
1
2
Press DISC CHANGE.
➜ The disc tray will open without interrupting
current playback.
To play all discs on the disc tray
PressÉÅ.
➜ All the available discs will play once, then stop.
➜ During playback, the selected disc tray, track
number and elapsed playing time of the current
track are displayed.
G
To change the inner disc, press DISC
CHANGE again.
➜ "DISC CHANGE" is displayed and the disc
will stop playing.
➜ The disc tray will close to retrieve the inner
disc, then reopen with the inner disc accessible.
To play the selected disc only
In CD mode, press CD 1, CD 2 or CD 3 on
the system.
G
Repeat and Shuffle
You can select and change the various play
modes before or during playback.
➜ The selected disc will play once, then stop.
To interrupt playback
PressÉÅ.
➜ The current track time flashes.
Repeat play
G
G
1
2
Press REPEAT on the remote control
repeatedly to select :
➜ "TRACK" – to repeat playback of the current
track.
➜ "DISC" – to repeat playback of the current
disc.
➜ "ALL" or "PROGRAM" – to repeat playback of
all available discs or programmed tracks.
To resume playback, pressÉÅagain.
To stop playback
Press Ç.
G
Selecting a desired track/passage
To search for a particular passage during
playback
Press and hold à or á and release it when
the desired passage is located.
To resume normal playback, press REPEAT
until "REPEAT OFF" is displayed.
➜ REP is shown, except for REPEAT OFF mode.
G
➜ During searching, the volume will be reduced.
Random play
1
2
Press SHUFFLE on the remote control.
➜ SHUF is shown and "SHUFFLE" is displayed.
➜ All the available discs or programmed tracks
(if program is active) will be played in random
order.
To select a desired track
Press í or ë repeatedly until the desired
track is displayed.
G
G
If playback is stopped, pressÉÅ to start
playback.
To resume normal playback, press SHUFFLE
again.
Note:
➜ SHUF disappears.
– In Shuffle mode, pressingí will cause the
player to skip only to the beginning of the current
track.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
Notes:
To review the program
– During program play or shuffling mode, it is not
possible to repeat playback for the current disc
(Repeat Disc mode).
G
G
Stop playback and press í or ë repeatedly.
To exit review mode, press Ç.
– Pressing the CD OPEN/CLOSE button will cancel
all repeat and shuffling modes.
Erasing the program
G
Press Ç once when playback is stopped or
twice during playback.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
➜ PROG disappears and "PROGRAM CLEARED"
is displayed.
Note:
1
2
Load the desired discs on the disc tray (refer to
“Loading discs”).
– The program will be erased when the system is
disconnected from the power supply or when the
disc tray is opened.
Press PROGRAM to start programming.
➜ PROG starts flashing.
3
4
Press CD 1/2/3 to select a disc.
Press í or ë repeatedly to select the desired
track.
For Recording, please refer to “Tape
Operation/Recording”.
5
G
Press PROGRAM to store the track.
Repeat steps 3–5 to store other discs and
tracks.
6
To end programming, press Ç once .
➜ PROG stays and the program mode remains
active.
➜ The total number of tracks programmed and
the total playing time are displayed.
7
To start program play, pressÉÅ.
➜ "PLAY PROGRAM" is displayed.
Notes:
– If the total playing time is more than "99:59"
or if one of the programmed tracks has a number
greater than 30, then "--:--" is displayed
instead of the total playing time.
– If you attempt to program more than 40 tracks,
"FULL" is displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the Program
mode automatically.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
STANDBY-ON
2
FM•AM
TAPE 1•2
TUNER
TAPE
CD 1
CD 2
CD 3
3 CD DIRECT PLAY
SEARCH/
TUNING
SEARCH/
TUNING
CD
OPEN•CLOSE
VOLUME
DSC
L
L
PREV•PRESET
DEMO STOP
NEXT•PRESET
DIM
DISC
PROGRAM CLOCK•TIMER
DIGITAL SOUND
CONTROL
CHANGE
DYNAMIC
BASS BOOST
DBB
To begin automatic preset from a desired
preset number
Press í or ë to select the desired preset
number.
➜ If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
Tuning to radio stations
1
Press TUNER to selectTUNER mode.
G
➜ "TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
➜ If an FM station is received in stereo, is
displayed.
2
Press and hold PROGRAM until "AUTO" is
displayed.
➜ PROG starts flashing.
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
2
3
Press TUNER again to select the desired
waveband : FM or AM.
Press and hold à or á until the frequency
indication starts to change, then release.
➜ The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
4
Repeat step 3 if necessary until you find the
desired radio station.
G
To tune to a weak station, press à or á briefly
and repeatedly until optimal reception is found.
To stop storing the automatic preset
Press PROGRAM or Ç on the system.
G
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
Automatic Preset Programming
G
Plug and Play setting (refer to “Basic Functions -
Plug and Play”).
OR
1
Press TUNER to selectTUNER mode.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
Manual Preset Programming
Erasing a preset radio station
1
2
Tune to your desired radio station (refer to
“Tuning to radio stations”).
1
2
Press í or ë to select the preset radio station
to be erased.
Press PROGRAM.
➜ PROG starts flashing.
➜ The next available preset number is displayed
for selection.
Press and hold Çon the system until “PRESET
DELETED” is displayed.
➜ The deleted radio frequency remains on the
display.
➜ The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
Repeat steps 1–2 to erase other preset radio
stations.
To store the radio station to another
preset number
Press í or ë to select the desired preset
number.
G
G
3
Press PROGRAM again to store the radio
station.
➜ PROG disappears.
For Recording, please refer to “Tape
Operation/Recording”.
G
G
Repeat steps 1–3 to store other radio stations.
To exit manual preset mode
Press Ç on the system.
Notes:
– If you attempt to store more than 40 preset
radio stations, "FULL" is displayed.
– During programming, if no key is pressed within
20 seconds, the system will exit the Program mode
automatically.
Tuning to preset radio stations
G
Once you’ve programmed the radio stations,
press í or ë to select the desired preset
number.
➜ The preset number, radio frequency, and
waveband are displayed.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation / Recording
STANDBY-ON
2
FM•AM
TAPE 1•2
TUNER
TAPE
CD 1
CD 2
CD 3
3 CD DIRECT PLAY
SEARCH/
TUNING
SEARCH/
TUNING
CD
OPEN•CLOSE
VOLUME
DSC
L
L
PREV•PRESET
DEMO STOP
NEXT•PRESET
DIM
DISC
PROGRAM CLOCK•TIMER
DIGITAL SOUND
CONTROL
CHANGE
DYNAMIC
BASS BOOST
DBB
FULL AUTO STOP
CONTINUOUS PLAY
DECK 1 PLAYBACK•RECORD
PLAYBACK DECK 2
IMPORTANT!
Playing tapes
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may
jam or burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
To playback a selected tape deck
PressÉ on tape deck 1 or 2.
➜ The tape will stop at the end of playback.
G
Continuous playback of two tapes
Load the tapes in tape deck 1 and 2.
PressÉon tape deck 2.
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer,TV or
speaker).
1
2
3
Press Åon tape deck 1, followed byÉ.
➜ Playback will begin from tape deck 2 and
continue with tape deck 1. It will stop at the end
of tape deck 1.
Loading tape
1
Press TAPE to selectTAPE
mode.
➜ "TAPE" is displayed.
To interrupt playback
Press Å.
G
G
2
3
4
Press 70to open the tape
deck door.
To resume playback, press Åagain.
To stop playback
Press 70.
Load the tape with the open
side downward and full spool to the left.
G
Close the tape deck door.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation / Recording
Preparation for recording
Rewinding / Fast forwarding
1
2
Load a recordable tape into tape deck 1 with full
spool to the left.
1
2
Stop playback, press à or á.
➜ The tape will stop automatically at the end of
rewinding or fast forwarding.
Prepare the source to be recorded.
CD 1/2/3 – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2 with the full spool to the left.
Press 70to stop rewinding or fast forwarding.
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
When recording is in progress
➜ REC starts flashing.
G
G
It is not possible to listen to another source.
General information on
recording
For recording, use only tape of IEC type I
(normal tape).
The recording level is set automatically,
regardless of the position of theVolume, DBB,
DSC and so forth.
It is not possible to activate the timer function
during recording or tape dubbing.
G
G
One touch recording
1
Press CD 1/2/3 or TUNER to select the
source.
G
G
The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
2
3
Start playback of the selected source.
Press G on tape deck 1 to start recording.
To stop recording
Press 70 on tape deck 1.
G
CD Synchronized start recording
1
G
Press CD 1/2/3 to select the disc.
You can program the tracks in the order you
want them to be recorded (refer to “CD
Operation - Programming the disc tracks”).
2
Press G on tape deck 1 to start recording.
➜ The disc will start playback automatically.
To stop recording
Press 70 on tape deck 1, then press Ç to stop
disc playback.
IMPORTANT!
G
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Note:
– Recording is possible only on tape deck 1.
– During CD synchronized start recording, do not
fast forward/rewind the tape in tape deck 2.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation / Recording
Notes:
Dubbing tapes
– Dubbing of tapes is possible only from tape
deck 2 to tape deck 1.
1
Load the prerecorded tape in tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
G
Make sure both tapes have their full spool to the
left.
2
3
Press Åon tape deck 1 and followed by G.
PressÉon tape deck 2.
➜ Recording will start automatically.
G
G
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
Press 70 on tape deck 1 and 2.
Maintenance
Cleaning the Cabinet
Cleaning the Heads and theTape Paths
G
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
G
To ensure good recording and playback quality,
clean the heads A and B, the capstan(s) C,
and pressure roller(s) D after every 50 hours
of tape operation.
Cleaning Discs
G
G
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
You can also clean the heads by playing a
cleaning tape once.
G
G
When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the center
out.
Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic spray intended for
analog records.
Cleaning the disc lens
G
After prolonged use, dirt or dust may
accumulate at the disc lens.To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
Demagnetizing the heads
Use a demagnetizing tape available at your
dealer.
G
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
STANDBY-ON
2
FM•AM
TAPE 1•2
TUNER
TAPE
CD 1
CD 2
CD 3
3 CD DIRECT PLAY
SEARCH/
TUNING
SEARCH/
TUNING
CD
OPEN•CLOSE
VOLUME
DSC
L
L
PREV•PRESET
DEMO STOP
NEXT•PRESET
DIM
DISC
PROGRAM CLOCK•TIMER
DIGITAL SOUND
CONTROL
CHANGE
DYNAMIC
BASS BOOST
DBB
Notes:
View clock
The clock (if it is set) will be shown in standby
mode.
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
To view the clock in any source mode
(CD orTUNER for example)
Press CLOCK•TIMER.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
G
➜ The clock is displayed for a few seconds.
➜ If the clock has not been set, "--:--" is
displayed.
Timer setting
The system can switch on to CD orTUNER
mode automatically at a preset time, serving as
an alarm to wake you up.
Clock setting
The clock can be set in either 12-hour or
24-hour mode ("12:00 AM" or "00:00", for
example)
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
1
2
In standby or view clock mode, press
CLOCK•TIMER once. In other source mode,
press CLOCK•TIMER twice.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer controlled
playback will increase gradually from the
minimum level to the last tuned volume
level.
Press PROGRAM repeatedly to select clock
mode.
➜ "12:00 AM" or "00:00" starts flashing.
3
4
5
Press à or á on the system repeatedly to set
the hour.
Press í or ë on the system repeatedly to set
the minute.
1
Press and hold CLOCK•TIMER for more than
two seconds to select timer mode.
➜ "12:00 AM" or "00:00" or the last timer
setting starts flashing.
Press CLOCK•TIMER again to store the
setting.
➜
starts flashing.
➜ The clock starts working.
To exit without storing the setting
G
Press Çon the system.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
2
Press CD 1/2/3, TUNER or PROGRAM to
select the desired source.
➜ “CD1[or 2, 3] XX:XX" indicates the CD
mode is selected.
➜ “TUXX:XX” indicates theTuner mode is
selected.
➜ “PROGXX:XX" indicates the CD program
mode is selected.
Activating the timer (for the same preset
time and source)
1
2
Press and hold CLOCK•TIMER for more than
two seconds.
Press CLOCK•TIMER again to store.
➜ The last set timer information is displayed for
a few seconds and is shown.
G
Before setting timer, make sure the music source
has been prepared.
Sleep timer setting
The sleep timer enables the system to switch to
standby mode automatically at a preset time.
CD 1/2/3 – Load the disc(s).To start from a
specific track, make a program (refer to “CD
Operation - Programming the disc tracks”).
TUNER – tune to the desired radio station.
1
2
Press SLEEP on the remote control repeatedly
to select a preset time.
➜ The selections are as follows (time in
minutes):
15™ 30™ 45™ 60™ 90™ 120™
3
4
5
Press à or á on the system repeatedly to set
the hour for the timer to start.
Press í or ë on the system repeatedly to set
the minute for the timer to start.
OFF™ 15…
➜ "SLEEP XX" or "OFF" is displayed. "XX" is the
time in minutes.
Press CLOCK•TIMER to store the timer.
➜ "TIMER ON" is displayed, followed by the set
timer "XX:XX" and the selected source.
When you reach the desired length of time, stop
pressing the SLEEP button.
➜
remains on the display.
➜
is shown, except for "OFF" mode.
G
G
At the preset time, the selected sound source
will play.
➜ The sleep timer is now set. Before the system
switches to standby mode, a countdown of 10
seconds is displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
To exit without storing the setting
Press Çon the system.
Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available,Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
To check the remaining length of time
after sleep timer is activated
Press SLEEP once.
G
G
To change the preset sleep timer
Press SLEEP again while the remaining sleep
timer is shown.
➜ The display will show the next sleep timer
options.
Deactivating the timer
1
2
Press and hold CLOCK•TIMER for more than
two seconds.
To deactivate the sleep timer
Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
G
Press Ç on the system to cancel the timer.
➜ "CANCEL" is displayed and the disappears.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
GENERAL INFORMATION
AMPLIFIER
Material .............................................................. Polystyrene
AC Power ................................................... 120V / 60 Hz
Power Consumption
Active ......................................................................... 24 W
Standby .................................................................. ≤ 11 W
Dimensions (w x h x d)
.......................................... 13.00 x 12.20 x 10.43 (inch)
...................................................... 330 x 310 x 265 (mm)
Weight (without speakers).................. 9.74 pounds
............................................................................................ 4.4 kg
Output power ................................... 4 W total power
...................................................................... 2 x 2 W RMS(1)
Signal-to-noise ratio.......................... ≥ 67 dBA (IEC)
Frequency response .......................... 50 – 15000 Hz
Impedance loudspeakers ......................................... 8 Ω
Impedance headphones .................... 32 Ω -1000 Ω
(1) (8Ω, 60 Hz – 12.5 kHz, 10%THD)
CD PLAYER
Number of programmable tracks ......................... 40
Frequency range .................................. 20 – 20000 Hz
Signal-to-noise ratio....................................... ≥ 80 dBA
Channel separation ..........................≥ 60 dB (1 kHz)
Total harmonic distortion........................... < 0.003%
Subject to modification
TUNER
FM wave range ................................... 87.5 – 108 MHz
AM wave range .................................. 530 – 1700 kHz
Number of presets ........................................................ 40
Antenna
FM................................................... 300 Ω dipole wire
AM............................................................ Loop antenna
TAPE DECK
Frequency response
Normal tape (type I)...... 80 – 10000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I)................................ ≥ 48 dBA
Wow and flutter .......................................≤ 0.35% DIN
SPEAKERS
System .................................... double port bass reflex
Impedance........................................................................ 8 Ω
Woofer .................................................... 1 x 4" full range
Dimensions (w x h x d)
........................................................ 7.2 x 12.2 x 6.5 (inch)
...................................................... 183 x 310 x 165 (mm)
Weight.....................................................3.4 pounds each
................................................................................ 1.6 kg each
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to solve a problem by following these hints, consult your dealer or service center.
Problem
Solution
CD OPERATION
“NO DISC” is displayed.
–
–
–
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at the lens
has cleared.
–
–
Replace or clean the disc, see “Maintenance”.
“DISC NOT FINALIZED” is displayed.
Use a finalized CD-RW or CD-R.
RADIO RECEPTION
Radio reception is poor.
–
–
If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
Increase the distance between the Mini HiFi
System and yourTV orVCR.
TAPE OPERATION/RECORDING
Recording or playback cannot be made.
–
–
–
Clean deck parts, see “Maintenance”.
Use only NORMAL (IEC I) tape.
Apply a piece of adhesive tape over the missing
tab space.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
GENERAL
The system does not react when buttons
are pressed.
–
Remove and reconnect the AC power plug and
switch on the system again.
Sound cannot be heard or is of poor
quality.
–
–
–
–
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
The left and right sound outputs are
reversed.
–
Check the speaker connections and location.
The remote control does not function
properly.
–
Select the source (CD 1/2/3 orTUNER, for
example) before pressing the function button
(É,í,ë).
–
–
Reduce the distance between the remote
control and the system.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the batteries.
–
–
Point the remote control directly towards the IR
sensor.
The timer is not working.
–
–
Set the clock correctly.
Press and hold CLOCK•TIMER to switch on the
timer.
–
–
–
If recording or tapes dubbing is in progress, stop
recording.
The Clock/Timer setting is erased.
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
The system displays features
automatically.
Press and hold Çon the system to switch off
the demonstration.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
MAGNAVOX AUDIO SYSTEM
One Year Free Exchange
This product must be carried in for an exchange.
WHO IS COVERED?
BEFORE REQUESTING EXCHANGE...
Please check your owner’s manual before requesting an exchange.
Adjustments of the controls discussed there may save you a trip.
You must have proof of purchase to exchange the product. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase. Attach it to this owner’s manual and
keep both nearby.
EXCHANGING A PRODUCT IN U.S.A.,
WHAT IS COVERED?
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Contact 1-800-705-2000 to arrange an exchange. Or, ship the product,
insured and freight prepaid, and with proof of purchase enclosed, to
the address listed below.
Warranty coverage begins the day you buy your product. For one year
thereafter, a defective or inoperative product will be replaced with a
new, renewed, or comparable product at no charge to you. A replace-
ment product is covered only for the original warranty period. When
the warranty on the original product expires, the warranty on the
replacement product also expires.
Magnavox Exchange Program
Suite A
406 North Irish Street
Greeneville, TN 37745
WHAT IS EXCLUDED?
(In U.S.A., Puerto Rico, and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a partic-
ular purpose, are limited in duration to the duration of this express
warranty. But, because some states do not allow limitations on how
long an implied warranty may last, this limitation may not apply to
you.)
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
•
product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control of
Magnavox.
EXCHANGING A PRODUCT IN CANADA...
Please contact Magnavox at:
•
•
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
1-800-661-6162 (French Speaking)
1-800-705-2000 (English Speaking or Spanish Speaking)
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose. Magnavox
is not liable under any circumstances for any direct, indirect, special,
incidental or consequential damages, howsoever incurred, even if noti-
fied of the possibility of such damages.)
•
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequen-
tial damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
REMEMBER...
Please record below the model and serial numbers found on the prod-
uct. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
MODEL # ___________________________________________
SERIAL # ___________________________________________
•
a product that is used for commercial or institutional purposes.
WHERE IS EXCHANGE AVAILABLE?
You may exchange the product in all countries where the product is
officially distributed by Magnavox. In countries where Magnavox does
not distribute the product, the local Magnavox service organization will
attempt to provide a replacement product (although there may be a
delay if the appropriate product is not readily available).
This warranty gives you specific legal rights. You may have other rights which
vary from state/province to state/province.
Magnavox, P.O. Box 520890, Miami, FL 33152 (402) 536-4171
EL6519E002 / 5-02
29
Download from Www.Somanuals.com. All Manuals Search And Download.
|