H9660UD_1.qx4 04.4.14 4:47 PM Page 1
OWNER’S MANUAL
MDV540VR/17
DIGITAL VIDEO DISC PLAYER & VIDEO CASSETTE RECORDER
THANK YOU FOR CHOOSING MAGNAVOX.
NEED HELP FAST?
READ YOUR QUICK-USE GUIDE AND/OR OWNER’S MANUAL FIRST FOR QUICK
TIPS THAT MAKE USING YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT WWW.MAGNAVOX.COM
OR CALL 1-800-705-2000 WHILE WITH YOUR PRODUCT.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 3
Safety and General Information
3
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or
moisture.
Federal Communications Commission (FCC) Warning: Any unauthorized changes or
modifications to this equipment void the user’s authority to operate it.
Department of Health and Human Services (DHHS) Certification: Complies with
21 Center for Radiation (CFR) chapter 1 subchapter J applicable at time of manufacture.
Laser Safety: This unit employs a laser. Only a qualified service person should remove
the cover or attempt to service this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCE-
DURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADI-
ATION EXPOSURE.
CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM.THE BEAM IS LOCATED INSIDE, NEAR THE
DECK MECHANISM.
Special Information for Canadian Users: This Class B digital apparatus
complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Radio/TV Interference: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful interference in a residential
installation.This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and the receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Copyright Protection: Unauthorized copying, broadcasting, public performance, and
lending of Discs are prohibited.This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Notice for Progressive Scan Use: Consumers should note that not all high
definition television sets are fully compatible with this product and may cause artifacts to be
displayed in the picture. In case of 525 progressive scan picture problems, it is recommended
that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this model 525p DVD player, please contact our
customer service center.
Note to the CableTV System Installer: This reminder is provided to call
the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code,
which provides guidelines for proper grounding – in particular, specifying that the cable
ground shall be connected to the grounding system of the building, as close to the point of
cable entry as possible.
Declaration of Conformity
Model Number:
Trade Name:
Responsible Party:
MDV540VR/17
Magnavox
Philips Consumer Electronics North America
P.O. Box 14810
Knoxville,TN 37914-1810
(865) 521-4316
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
Copyright 2004 Magnavox.All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 4
4
Table of Contents
General Information
AdditionalVCR Features
Safety and General Information . . . . . . . . . . . . . . . . .3 Multi-ChannelTelevision Sound . . . . . . . . . . . . .45-46
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Hi-Fi Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Playable Discs andVideo Cassettes . . . . . . . . . . . . . .6
Disc Playback Features
DVD Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . .48
Initial DVD/VCR Setup
Fast Forward/Reverse Search . . . . . . . . . . . . . . . . .49
Hookups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-15 Title/Chapter Playback, SpecificTime Playback . . . .50
Remote Control Setup . . . . . . . . . . . . . . . . . . . . . .16 Track Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
First-time DVD/VCR Setup . . . . . . . . . . . . . . . . . . .17 Paused and Step-by-Step Playback, Resume . . . . . . .52
Repeat,A-B Repeat . . . . . . . . . . . . . . . . . . . . . . . . .53
Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Subtitles, Camera Angles . . . . . . . . . . . . . . . . . . . . .55
Video Cassette Playback . . . . . . . . . . . . . . . . . . . . .18 Parental Controls Password . . . . . . . . . . . . . . . . . .56
Disc Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Parental Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Audio Language, Stereo Sound Mode . . . . . . . . . . .58
Basic Playback
Slow Motion, Zoom . . . . . . . . . . . . . . . . . . . . . . . .59
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . .60
Display Panel (DVD) . . . . . . . . . . . . . . . . . . . . . . . .20 Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Display Panel (VCR) . . . . . . . . . . . . . . . . . . . . . . . .21 MP3/JPEG Playback . . . . . . . . . . . . . . . . . . . . . . . . .62
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 MP3/JPEG Displays . . . . . . . . . . . . . . . . . . . . . . . . .63
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Basic DVD/VCR Controls
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .24-25
DVD Player Setup Options
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64-65
AdditionalVCR Setup
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66-67
Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . .26-27 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Clock (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-29 On-Screen Displays . . . . . . . . . . . . . . . . . . . . . . . . .69
Language (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Black Level,Virtual Surround . . . . . . . . . . . . . . . . . .70
VCR Status Displays . . . . . . . . . . . . . . . . . . . . . . . .31 Initializing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
VCR Recording Options
InformationYou May Need
Videotape Recording . . . . . . . . . . . . . . . . . . . . . . . .32 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Recording One Channel/Watching Another . . . . . .33 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . .34 Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . .74-77
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . .35 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . .78
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . .36-38 LimitedWarranty . . . . . . . . . . . . . . . . . . . . . . . . . . .79
DVD toVideotape Duplication . . . . . . . . . . . . . . . .39 Information Index . . . . . . . . . . . . . . . . . . . . . . . . . .80
Video Cassette Playing Options
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Tape Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Time Search, Index Search . . . . . . . . . . . . . . . . . . . .42
Special Effects Playback . . . . . . . . . . . . . . . . . . . . . .43
Automatic Operation Features . . . . . . . . . . . . . . . .44
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 5
Introduction
5
Welcome!
This DVD/VCR combines a DigitalVideo Disc (DVD) Player and a Hi-FiVideo Cassette
Recorder (VCR) into one unit, letting you play DVDs,Audio Compact Discs (Audio
CDs), andVideo Cassettes on one piece of equipment.
Read this owner’s manual carefully to learn how to use the features listed below.
VCR Features
• Repeat Play
• Automatic Head Cleaner
• Searching:Time, Index, Forward, and
• Channel Setup
Reverse
• English, French, and Spanish menus and dis-
• Slow Motion
plays
• Still Picture
• Multi-ChannelTV Sound
• Tape Counter
• 19 Micron head
• Tracking Adjustment
• Recording: One-Touch andTimer
Disc Features
• Program Playback
• Audio Language choices*
• Progressive Scan
• Bit Rate display
• Random Playback
• Camera Angle *
• Repeat, Repeat A-B
• Dolby Digital Sound*
• Screen Saver
• DVD toVideotape Duplication
• Search (Title/Chapter,Time,Track)
• Dynamic Range Control
• Subtitles*
• Fast/Paused/Slow/Step-by-Step Playback
• Virtual Surround
• Markers
• Parental Controls*
• Zoom
* If available on the DVD
Package Contents
The following items are provided with your new DVD/VCR.
• Remote Control and two AA batteries
• One black RF coaxial cable, 75 ohm
• One set of Audio (red and white tips) andVideo (yellow tips) cables
• Owner’s Manual and Quick-Use Guide
DVD Disc Menus...
Some explanations in this manual describe DVD Disc menus. DVD manufacturers set
the menus, which vary among DVDs. Not all DVDs have menus. If the DVD has a
menu, access it by pressing DVD, then DISC/MENU on the remote control.
Details are on page 48.
DVD Player Setup Menu...
Some instructions explain how to use the DVD Player’s Setup menu to set up features
of the DVD Player or a DVD.Access the DVD Player menu by pressing SETUP on the
remote control when playback is stopped. Even if a feature is set in the DVD Player’s
menu, it may not be available if the current DVD does not include that feature.
Available Disc Features...
All features described in this manual are not available on every Disc. If the feature is
not available on the Disc, you cannot use the DVD/VCR to make it
available.An “X” will appear in the top right corner of the TV screen if
you try to access a feature that is not currently available.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 6
6
Playable Discs and Video Cassettes
Playable Discs
The DVD Player will play DigitalVideo Discs (DVDs);Audio Compact Discs (CDs); final-
ized DigitalVideo Discs Rewritable (DVD+RW); finalized Compact Discs Rewritable (CD-
RW) and Compact Discs Recordable (CD-R); andVideo Compact Discs (VCDs).
To play a DVD, make sure it meets the requirements for Region Codes and Color
Systems as described below. Discs that have the following logos will play on the DVD
Player. Other Disc types are not guaranteed to play in the DVD/VCR.
On a Super Audio CD, only the sound on the normal CD layer can be heard.
The sound on the high-density Super Audio CD layer cannot be heard.
Recordable
ReWritable
DVD
Audio CD
CD-RW/CD-R
Video CD
DVD+RW
Region Codes
This DVD/VCR has a Region One (1) DVD Player. DVDs must be labeled for ALL
regions or for Region 1 in order to play on the DVD Player.You cannot play DVDs
that are labeled for other regions. Look for the symbols below on your DVDs. If these
region symbols do not appear on your DVD, you cannot play the DVD in this DVD
Player.
The number inside the globe refers to a region of the world. Region 1 represents the
United States, Canada, upper regions of North America, Bermuda, the U.S.Virgin
Islands, and small regions near Australia.
A DVD labelled for a specific region can only play on DVD Players with the same
region code.
Color Systems
DVDs are recorded in different color systems throughout the world.The most com-
mon color systems are NTSC (which is used primarily in the United States and North
America), PAL, and SECAM.
This DVD Player will play both NTSC and PAL DVDs.You cannot play DVDs recorded
in other formats.The color system of the DVD may be listed on the DVD or on the
Disc case.Your TV must have the NTSC and/or PAL color system as well.
PlayableVideo Cassettes
TheVCR of this DVD/VCR has a High Quality (HQ) system and is compatible with
existingVideo Home System (VHS) equipment. Use only video cassettes that have the
mark.The use of other tapes may result in poor picture quality and excessive
deposits on the video heads, which may not be covered by the warranty if damage
occurs.
TheVCR also has a 19 micron head, which provides a better picture when you view
tapes recorded in slow speed (SLP).
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 7
Hookups
7
Determining the best possible connection...
Your hookup will be determined primarily by your existing equipment, especially yourTV.The following guidelines
describe which options have the best picture and sound quality.You will not use all the jacks on the DVD/VCR.
If yourTV only has an RF-style jack, usually labelled Antenna In, RF In, or 75 ohm, use the ANT-OUT
jack of the DVD/VCR to connect to theTV.This hookup provides both audio and video in a single
cable. Set yourTV to channel 3 or 4 - the output channel of the DVD/VCR.This connection allows you
to use both the DVD andVCR features. Details are on page eight.
★★★★
If yourTV has ComponentVideo In jacks (which could be labelledY CR CB,Y PR PB, orYUV and may be
green, blue, and red), use the COMPONENTVIDEO OUT jacks (Y CB/PB CR/PR) for the best picture
quality. If you use only this video connection, only the DVD picture will be available.To see DVD features
on theTV, set theTV to its ComponentVideo In channel. Details are on page 12.
Progressive Scan provides less flickering and higher image resolution than traditional (525i/480i or inter-
lace)TV signals. If yourTV has Progressive Scan (525p/480p or progressive), connect theTV to the
DVD/VCR’s COMPONENTVIDEO OUT (Y CB/PB CR/PR) jacks.
Set PROGRESSIVE to ON in the DVD/VCR’s DISPLAY menu. Details are on pages 64-65. P.SCAN will
appear on the DVD/VCR’s display panel. Set yourTV to Progressive Scan also.
If yourTV does not have Progressive Scan but has ComponentVideo In jacks, connect them to the
DVD/VCR’s COMPONENTVIDEO OUT jacks (Y CB/PB CR/PR). Set PROGRESSIVE to OFF either in the
DISPLAY menu or by pressing and holding the PLAY B (DVD) button on the front of the DVD/VCR for
more than five seconds. Details are on pages 64-65.
If yourTV has an S-Video In jack (which also may be labelledY/C or S-VHS), use the S-VIDEO OUT jack
for excellent picture quality. If you use only this video connection, only the DVD picture will be available.
To see DVD features on theTV, set theTV to its S-Video In channel. Details are on page 13.
If yourTV has a single yellowVideo In jack (which also may be labelled CVBS, Composite, or baseband),
use the yellow VIDEO OUT jack for good picture quality.This connection provides a picture for both
the DVD Player and theVCR.To see DVD orVCR features on theTV, set theTV to itsVideo In channel.
Details are on page 11.
★★★
★★
★★★★
★★★
If you have a Stereo with a Coaxial Digital Audio In jack, this provides the clearest sound for the DVD
Player. Connect the DVD/VCR’s COAXIAL DIGITAL AUDIO OUT jack to your Stereo for the best
sound quality. If you use only this audio connection, only Disc sound (noVCR) will be available. Details
are on page 15.
If digital audio connections are not possible, connect the DVD/VCR’s red and white DVD/VCR AUDIO
OUT jacks to the Audio In jacks of your Stereo orTV.This connection provides sound for both the
DVD Player and theVCR. Details are on pages 11-14.
Before you begin...
● Refer to the manuals of yourTV, Cable Box, Stereo, or other devices as necessary. Note the style of jacks and
connectors on the other equipment. Determine how to choose different Audio andVideo In channels on your
other equipment so you can see and hear the DVD/VCR material playing on theTV, Stereo, etc.
● Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
have finished hooking up everything. Never make or change connections with equipment connected to the power
outlet.
Remember...
● Set theTV to the correctVideo In channel. Such channels may be called AUX or AUXILIARY IN,AUDIO/VIDEO
or A/V IN, EXT1 or External In, etc.These channels often are located near channel zero (0). See yourTV owner’s
manual for details. If you do not see the DVD orVCR playback on theTV, go to the lowestTV channel (01 or 02)
and change channels downward until you see the DVD orVCR picture on theTV. Or, if yourTV has only a single
Antenna In jack and you are using the RF coaxial cable (as described on page eight), set theTV to channel 3 or 4.
To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press DVD to put the DVD/VCR in
DVD mode.With no Disc in the Player, a large DVDVideo logo will appear on theTV screen when you get the
TV on the correct Audio/Video In channel or channel 3 or 4.
● Set the Stereo to the correct channel or “source” mode.
● Depending on your connection, you may need to purchase additional cables or adaptors. If yourTV or monitor
has BNC-type connectors, you will need an adaptor.
● If you set Progressive Scan on or off when the power is on, the DVD/VCR will turn off.When you turn on the
DVD Player again, the last selected scanning system will be active.
● To use theVCR features, you must include a connection with the supplied yellow video cable and
red/white audio cables or with the supplied RF coaxial cable.
Once you determine the best option, find your choice on pages 8-15. Follow the steps for the hookup
you choose.Then, go to page 17 to complete the first-time setup.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 8
8
Hookups (cont’d)
DVD/VCR toTV only
Simplest connection using only the supplied black RF coaxial cable
This connection will let you use the features of both theVCR and the DVD Player.
DVD
DVD/VCR VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT AUDIO IN
OUT
OUT
ANT-IN
AUDIO OUT
Y
L
L
L
C
B
/
/
R
R
P
B
COAXIAL
VIDEO OUT VIDEO IN
ANT-OUT
R
CR
PR
Antenna or
Cable TV
1 signal
ANT-IN
75
ANT /
CABLE
Black RF
coaxial cable
2(supplied)
Antenna In Jack
(on back of TV)
example only
ANT-OUT
Disconnect the antenna or CableTV signal from yourTV and connect it to the ANT-IN
(Antenna In) jack of your DVD/VCR.
1
2
Connect the supplied black RF coaxial cable to the ANT-OUT (Antenna Out) jack on the
back of the DVD/VCR and to the ANTENNA IN JACK on theTV. The ANTENNA IN jack on
theTV may be labelledTV IN, RF IN, 75Ω (ohm), or ANT-IN. See yourTV owner’s manual for assistance.
Plug in the power cords of theTV and the DVD/VCR.
3
4
Set yourTV to channel 3 or 4. The DVD/VCR’s output channel is 3 when you purchase it. So, set
yourTV to channel 3 when the DVD/VCR is new.
If you cannot use channel 3 at yourTV, you can change the DVD/VCR’s output channel to channel 4.To
do so, press theVCR button to put the DVD/VCR inVCR mode.TheVCR light will be on the front of
the DVD/VCR. Insert a videotape and press PLAY B to start playback. During playback, press and
hold the (VCR) PLAY B button on the front of the DVD/VCR for three to five seconds.
Each time you do this, the DVD/VCR’s output channel switches between 3 and 4, and the selected chan-
nel number appears on the front display. Change yourTV to channel 3 or 4 accordingly. (You cannot
change the DVD/VCR’s output channel while adjusting tracking manually. Press STOP C to stop playing
and cancel manual tracking, then press PLAY B to resume playing and change the output channel.)
There is not a channel 3/4 switch on the DVD/VCR (as customary with mostVCRs).
You are ready to turn on the DVD/VCR. Go to page 17 before turning on the DVD/VCR.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 9
Hookups (cont’d)
9
DVD/VCR to Cable Box or Satellite Receiver andTV
Using only basic RF coaxial cables
This connection will let you use the features of both theVCR and the DVD Player.
DVD/VCR
Cable Box/Satellite Receiver
2
1
75
ANT /
CABLE
IN
OUT
RF coaxial cable
ANT-IN
ANT-OUT
Cable TV /
Satellite Signal
TV’s ANTENNA
IN Jack
RF coaxial cable
3
Connections
Connect a CableTV or Satellite signal to the IN jack
on the Cable Box/Satellite Receiver.
1
2
3
Use an RF coaxial cable (as the one supplied) to con-
nect the OUT jack on the Cable Box/Satellite
Receiver to the ANT-IN (Antenna In) jack on the
DVD/VCR.
Use a second RF coaxial cable to connect the ANT-
OUT (Antenna Out) jack on the DVD/VCR to the
TV’s Antenna In jack.
Remember...
There are two ways to connect your Cable Box/Satellite Receiver to
the DVD/VCR.With the connection on this page:
● SelectTV channels at the Cable Box/Satellite Receiver, not the
DVD/VCR.To record or viewTV channels, follow these steps:
1) PressVCR to put the DVD/VCR inVCR mode.TheVCR light
will appear on the front of the DVD/VCR.
2) Press NEXT ∑/CH o or PREVw/CH p to set the
DVD/VCR to the Cable Box/Satellite Receiver output channel (03
or 04).
3) Set theTV to the DVD/VCR’s output channel (03 or 04).The
DVD/VCR’s output channel is channel 3 when the DVD/VCR is
new.To change it from 3 to 4, press and hold the (VCR) PLAY
button on the DVD/VCR for 3-5 seconds during tape playback.
For more details, see step 4 on page 8.
4) Select the channel you want to view/record at the Cable
Box/Satellite Receiver.
You may not view a channel other than the one you are recording.
You can only program a timer recording for one channel at a time.
Set your Cable Box/Satellite Receiver to the channel you want to
record.When you enter the channel you want to record in a timer
recording, select channel 03 or 04 (the Cable Box/Satellite Receiver
output channel). (This is step 8 on page 37.) Leave the Cable
Box/Satellite Receiver on for a timer recording.
B
Helpful Hint
• If your Cable Box or Satellite
Receiver has Audio andVideo Out
jacks, use audio and video cables
to connect them to theVCR
AUDIO IN andVIDEO IN jacks on
the rear of the DVD/VCR.You will
not need the RF coaxial cable con-
nection between the Cable
●
●
Box/Satellite Receiver and the
DVD/VCR as described at step 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 10
10 Hookups (cont’d)
DVD/VCR to Cable Box or Satellite Receiver andTV
Using only basic RF coaxial cables
This connection will let you use the features of both theVCR and the DVD Player.
DVD/VCR
Cable TV /
Cable Box/Satellite Receiver
Satellite Signal
7
5
G
ANT-IN
O
2
A
N
T
L
1
/
E
C
A
B
ANT-OUT
IN
OUT
RF coaxial cable
RF coaxial cable
TV’s ANTENNA
IN Jack
3
Connections
Connect a CableTV or Satellite signal to the DVD/VCR’s ANT-IN (Antenna In) jack.
1
2
3
Use an RF coaxial cable (as the one supplied) to connect the ANT-OUT (Antenna Out)
jack on the DVD/VCR to the IN jack on the Cable Box/Satellite Receiver.
Use a second RF coaxial cable to connect the OUT jack on the Cable Box/Satellite
Receiver to the ANTENNA IN jack on theTV.
Remember...
There are two ways to connect your Cable Box/Satellite Receiver to the DVD/VCR.With the connection on
this page:
● You may watch one channel while recording another. Follow these steps:
1) Put the Cable Box/Satellite Receiver on the same channel as the DVD/VCR’s output channel (03 or 04).
The DVD/VCR’s output channel is channel 3 when the DVD/VCR is new.To alternate it between 3 and 4,
press and hold the (VCR) PLAY Bbutton on the front of the DVD/VCR for 3-5 seconds during tape play-
back. For details, see step 4 on page eight. Set theTV to the Cable Box/Satellite Receiver output channel (03 or
04).
2) PressVCR to put the DVD/VCR inVCR mode.TheVCR light will appear on the front of the DVD/VCR.
3) PressVCR/TV on the remote to chooseVCR position.
4) Press NEXT ∑/CH o or PREVw/CH p to select the channel you want to record at the DVD/VCR.
Press REC I or RECORD I to start the recording.
5) PressVCR/TV on the remote once to put the DVD/VCR inTV position.
6) Select the channel you want to watch at the Cable Box/Satellite Receiver.
● When you play a tape or Disc, make sure the Cable Box/Satellite
Receiver is set to the DVD/VCR’s output channel (03 or 04).
Set theTV to the Cable Box/Satellite Receiver output channel (03 or 04).
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 11
Hookups (cont’d) 11
DVD/VCR to aTV that has Audio andVideo In jacks
Using the supplied red, white, and yellow cables
This connection will let you use the features of both theVCR and the DVD Player.
Antenna or Cable TV
Signal to ANT-IN Jack
1
DVD
DVD/VCR VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT A
OUT
OUT
ANT-IN
AUDIO OUT
Y
L
L
L
C
B
/
/
R
R
P
B
COAXIAL
VIDEO OUT VIDEO IN
ANT-OUT
R
Audio and
Video IN Jacks
on TV
Audio Cable
Video Cable
2
3
Connect the antenna or CableTV signal to the ANT-IN (Antenna In) jack of your
DVD/VCR.
1
2
Connect the red and white audio cables (supplied) to the red and white DVD/VCR AUDIO
OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on theTV. Match the
cable colors to the jack colors. If theTV has a single AUDIO IN jack, use the white audio cable to con-
nect the DVD/VCR’s white DVD/VCR AUDIO OUT (left) jack to theTV’s AUDIO IN jack.You will not
use the red cable. Or, purchase a “splitter” audio cable to go from the left/right AUDIO OUT jacks of
the DVD/VCR to theTV’s single AUDIO IN jack.
Connect the yellow video cable (supplied) to the DVD/VCRVIDEO OUT jack on the
DVD/VCR and to theVIDEO IN jack on theTV.
TheVIDEO IN jack on theTV is usually yellow and may be labelled CVBS, Composite, or Baseband
video.
3
4
Connect the power cords of theTV and the DVD/VCR to a power outlet.Turn on theTV
and set it to the correct Audio/Video In channel. Go to your lowest TV channel (01 or 02),
then change channels downward until you seeVCR or DVD playback on the TV screen.
To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press DVD to put the
DVD/VCR in DVD mode.With no Disc in the Player, a large DVDVideo logo will appear on the TV screen
when you get the TV on the correct Audio/Video In channel.
Make sure PROGRESSIVE is OFF and P.SCAN does not appear on the DVD/VCR’s display panel. Disable
Progressive Scan either in the DISPLAY menu or by pressing and holding PLAY B (DVD) on the
front of the DVD/VCR for more than five seconds. Details are on pages seven and 64-65.
You are ready to turn on the DVD/VCR. Go to page 17 to complete the first-time setup.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 12
12 Hookups (cont’d)
DVD/VCR to aTV that has ComponentVideo In jacks
Antenna or
Cable TV
Signal
1
DVD
DVD/VCR VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT
OUT
OUT
ANT-IN
AUDIO OUT
Y
L
L
L
C
B
/
/
R
R
P
B
COAXIAL
VIDEO OUT VIDEO IN
ANT-OUT
R
CR
PR
3 2
Connect the antenna or CableTV signal to the ANT-IN (Antenna In) jack of your
DVD/VCR.
1
2
3
Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO
OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on theTV. Match the
cable colors to the jack colors.
Connect component video cable (not supplied) to the COMPONENTVIDEO OUT jacks
on the DVD/VCR and to the COMPONENTVIDEO IN jacks on theTV. The Component
Video In jacks on theTV are usually red, blue, and green.
The ComponentVideo connection only supplies video (picture) for the DVD Player of the DVD/VCR.To use the
VCR features or viewTV channels at the DVD/VCR, you must connect either the supplied RF coaxial cable or the
yellow video cable.To connect the RF coaxial cable, see step 2 on page eight.To connect the video cable, see step
3 on page 11.
If yourTV is compatible with Progressive Scan (525p/480p), turn on Progressive Scan at the DVD/VCR. Set
PROGRESSIVE to ON in the DISPLAY menu so P. SCAN appears on the display panel. Details are on pages
64-65.
If yourTV is not compatible with Progressive Scan, disable Progressive Scan either in the DISPLAY menu or by
pressing and holding PLAY B (DVD) on the front of the DVD/VCR for more than five seconds so P. SCAN does
not appear on the display panel. Details are on pages seven and 64-65.
Connect the power cords of the DVD/VCR and theTV to a power outlet.Turn on theTV
and set it to the ComponentVideo In channel for DVD Player features.
If you are using the RF coaxial cable forVCR playback, choose channel 3 or 4 at theTV. If you are using
the yellow video cable forVCR playback, choose theVideo In channel at yourTV.
Go to your lowestTV channel and change channels down until you seeVCR or DVD playback on the
TV screen, or try channel 3 or 4 at theTV.
To help you find the right ComponentVideo In channel, turn on the DVD/VCR. Press DVD to put the
DVD/VCR in DVD mode.With no Disc in the Player, a large DVDVideo logo will appear on theTV
screen when you get theTV on the correct ComponentVideo In channel.
4
5
You are ready to turn on the DVD/VCR. Go to page 17 before turning on the DVD/VCR.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 13
Hookups (cont’d) 13
DVD/VCR to aTV that has an S-Video In jack
Antenna/Cable
TV Signal
1
DVD
DVD/VCR VCR
CENT
DIGITAL
AUDIO S-VIDE
AUDIO OUT AUDIO IN
OUT
OUT
ANT-IN
AUDIO OUT
Y
L
L
L
R
R
P
B
COAXIAL
VIDEO OUT VIDEO IN
ANT-OUT
R
C
R
/
P
R
3
AUDIO IN
LEFT
2
S-VIDEO IN
RIGHT
Connect the antenna or CableTV signal to the ANT-IN (Antenna In) jack of your
DVD/VCR.
1
2
3
Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO
OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on theTV. Match the
cable colors to the jack colors.
Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack on the DVD/VCR and
to the S-VIDEO IN jack on theTV.
The S-Video connection only supplies video (picture) for the DVD Player of the DVD/VCR.Therefore, in order to
use theVCR features or viewTV channels at the DVD/VCR, you still need to either connect the RF coaxial cable
between the ANT-OUT jack of the DVD/VCR and theTV’s Antenna In jack, or connect the yellow video cable.To
connect the supplied RF coaxial cable, see step 2 on page eight.To connect the supplied yellow video cable, see
step 3 on page 11.
Connect the power cords of the DVD/VCR and theTV to a power outlet.Turn on theTV
and set it to the S-Video In channel for DVD Player features.
If you are using the RF coaxial cable forVCR playback, choose channel 3 or 4 at theTV. If you are using
the yellow video cable forVCR playback, choose theVideo In channel at yourTV.To find the correct
Video In channel, go to your lowestTV channel and change channels downward until you seeVCR or
DVD playback on theTV screen, or try channel 3 or 4 at theTV.
4
To help you find the right S-Video In channel, turn on the DVD/VCR. Press DVD to put the DVD/VCR in
DVD mode.With no Disc in the Player, a large DVDVideo logo will appear on theTV screen when you get
theTV on the S-Video In channel.
Make sure PROGRESSIVE is OFF and P.SCAN does not appear on the DVD/VCR display panel. Disable
Progressive Scan either in the DISPLAY menu or by pressing and holding PLAY B (DVD) on the
front of the DVD/VCR for more than five seconds so P.SCAN does not appear on the display panel.
Details are on pages seven and 64-65.
You are ready to turn on the DVD/VCR. Go to page 17 before turning on the DVD/VCR.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 14
14 Hookups (cont’d)
DVD/VCR to aTV and a Stereo
Antenna/Cable
TV Signal
1
DVD
DVD/VCR VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT U
OUT
OUT
ANT-IN
AUDIO OUT
Y
L
L
L
C
B
/
R
R
P
B
COAXIAL
VIDEO OUT VIDEO IN
ANT-OUT
R
C
R
/
P
R
3
2
Connect the antenna or CableTV signal to the ANT-IN (Antenna In) jack of your
DVD/VCR.
1
2
3
Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO
OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the Stereo.
Match the cable colors to the jack colors.
Connect the supplied yellow video cable to the DVD/VCRVIDEO OUT jack on the
DVD/VCR and to theVIDEO IN jack on theTV.
To use ComponentVideo cable or S-Video cable instead for the DVD Player, see pages 12-13.You will
still need the yellow video cable or RF coaxial cable forVCR features.
Connect the power cords of the DVD/VCR,TV, and Stereo to a power outlet.Turn on
theTV and set it to theVideo In channel. Or, simply go to your TV’s lowest channel (02 or 03)
and continue changing channels downward at the TV until you seeVCR or DVD playback on the TV
screen.
To help you find the rightVideo In channel at the TV, turn on the DVD/VCR. Press DVD to put the
DVD/VCR in DVD mode.With no Disc in the Player, a large DVDVideo logo will appear on the TV screen
when you get the TV on the correctVideo In channel.
4
Turn on the Stereo and set it to the correct Auxiliary or Source mode. Check your Stereo
manual for details.
You are ready to turn on the DVD/VCR. Go to page 17 before turning on the DVD/VCR.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 15
Hookups (cont’d) 15
DVD/VCR to aTV and to a Stereo that is Dolby Digital-compatible
Using Digital Audio connections
Antenna/Cable TV Signal
1
DVD
DVD/VCR VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT AUDIO IN
OUT
OUT
ANT-IN
AUDIO OUT
Y
L
L
L
C
P
B
/
/
R
R
B
COAXIAL
VIDEO OUT VIDEO IN
ANT-OUT
R
C
P
R
R
Stereo
Back of TV
(example only)
3
2
Connect the antenna or CableTV signal to the ANT-IN (Antenna In) jack of your
DVD/VCR.
1
2
Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s COAXIAL DIGI-
TAL AUDIO OUT jack and to the COAXIAL DIGITAL AUDIO IN jack on the Stereo.
This digital audio connection only provides sound for the DVD Player of the DVD/VCR. So, in order to use theVCR
features or viewTV channels at the DVD/VCR, you still need to either connect the RF coaxial cable between the
ANT-OUT jack of the DVD/VCR and theTV’s Antenna In jack, or connect the supplied red/white audio cables.To
connect the supplied RF coaxial cable, see step 2 on page eight.To connect the red/white audio cables, see step 2
on page 11.
Connect the supplied yellow video cable to the yellow DVD/VCRVIDEO OUT jack on the
DVD/VCR and to theVIDEO IN jack on theTV. To use component video cable or S-Video cable
instead for the DVD Player, see pages 12-13.You will still need the yellow video cable or RF coaxial
cable forVCR features.
3
4
Plug in the power cords of the Stereo,TV, and DVD/VCR.Turn on the Stereo and select its
Auxiliary IN channel.Turn on theTV and set it to the correctVideo In channel. Go to your
TV’s lowest channel (01 or 02) and change channels downward until you see DVD orVCR material on
the TV screen.
To help you find the rightVideo In channel on the TV, turn on the DVD/VCR. Press DVD to put the
DVD/VCR in DVD mode.With no Disc in the Player, a large DVDVideo logo will appear on the TV
screen when you get the TV on the correctVideo In channel.
Make sure PROGRESSIVE is OFF and P.SCAN does not appear on the DVD/VCR display panel. Disable
Progressive Scan either in the DISPLAY menu or by pressing and holding PLAY B (DVD) on the front
of the DVD/VCR for more than five seconds so P.SCAN does not appear on the display panel. Details
are on pages seven and 64-65.
You are ready to turn on the DVD/VCR. Go to page 17 before turning it on.
5
Remember...
Some DVDs are recorded in Dolby Digital 5.1 channel Surround Sound. Select Dolby Digital 5.1 channel
Surround Sound in the DVD Disc menu. If Dolby Digital Surround Sound is not recorded on the Disc, you will
not have surround sound available.
If you connect the DVD/VCR to a Dolby Digital Stereo, set DOLBY DIGITAL to ON in the DVD Player’s
Setup menu. Details are on page 68. If the DVD/VCR is not connected to a Dolby Digital-compatible Stereo,
set DOLBY DIGITAL to OFF. Incorrect settings may cause noise distortion and damage the speakers.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 16
16 Remote Control Setup
Putting Batteries in the Remote Control
Remove the battery compartment lid on the bottom
of the remote control by pressing the tab, then lifting the
1
2
3
lid.
1
Place two AA batteries inside the battery compart-
ment with their and ends aligned as indicated.
+
–
Replace the battery compartment lid.
Using the Remote Control
● Point the remote control at the DVD/VCR’s remote sensor (see
page 22) when using the remote to operate the DVD/VCR. Do
not point the remote at the TV.
2
3
● Do not put objects between the remote and the DVD/VCR.
Recycling Guidelines/Battery Safety
● Your new product and its packaging contain materials that can
be recycled and reused. Specialized companies can recycle your
product to increase the amount that needs to be properly dis-
posed.Your product uses batteries that should not be thrown
away when depleted but should be disposed of as small chemical
waste. Please find out about the local regulations on disposal of
your old product, batteries, and packaging whenever you replace
existing equipment.
● Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage, or damage to the unit:
Install ALL batteries correctly, with the + and - markings on the
battery aligned as indicated on the unit;
Do not mix batteries, for example, old with new or carbon with
alkaline; and
Remove batteries when the unit will not be used for a long
time.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 17
First-time DVD/VCR Setup 17
Before turning on your DVD/VCR, make sure batteries are in the
remote control and the DVD/VCR and TV are connected correctly.
You cannot program channels if you are using a Cable Box or a
Satellite Receiver.
These menus may not appear if you have already turned
on the DVD/VCR.
Turn on the TV.
1
STANDBY-ON
TIMER SET
2
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
Turn on theTV. Set it to channel 3 or 4 or its
AUDIO/VIDEO IN channel, depending on how you con-
C-RESET
CLEAR
1
2
PREV/
CH
NEXT/
CH
nected the DVD/VCR to a TV.
TITLE
MODE
RETURN
PressVCR, then press STANDBY-ON. TheVCR light
DISPLAY
will appear on the front of the DVD/VCR.The display shown
VCR
DVD
DISC
below will appear.
MENU
OK
These menus may not appear if you have already turned on
the DVD/VCR.You may have turned on the DVD/VCR
before to find the Audio/Video In channel of the TV, for
example. If so, follow the steps on page 26 to set up chan-
nels and page 30 to select a language for theVCR menus.
3-4
STOP
PLAY
SEARCH
REW
SEARCH
FF
PAUSE
LANGUAGE SELECT
NA508
SPEED
BENGLISH
FRANCAIS
ESPAÑOL
[ON]
1
2
3
6
9
SLOW
4
7
5
8
0
ZOOM SEARCH MODE
PUSH
B
+10
Press o or p to select English, French, or Spanish as
the language forVCR on-screen displays and menus. Then,
press B.
3
4
AUTO SET UP
Helpful Hints
• To skip this feature and play a tape
immediately, insert a tape with its
record tab removed.
• To skip step 3, press DISC/MENU.
VCR menus and displays will be in
English.
• If you try to program channels
when there is no antenna or Cable
TV signal connected to the ANT-IN
jack of the DVD/VCR, programming
will stop.AUTO SET UP will stop
flashing. Connect an antenna or
CableTV signal to the DVD/VCR’s
ANT-IN jack and press B again.
• Repeat this process if the power
fails.
PUSH
B
Press B to begin channel programming. AUTO
SETUP will flash on the TV screen during the channel
search.The DVD/VCR will memorize all available channels.
When channel programming is complete, the lowest avail-
able channel will appear on the TV.
These channels will be available when you want to watch
TV while inVCR mode.To put the DVD/VCR inVCR
mode, pressVCR so theVCR light appears. Use the NEXT
∑/CH o or PREVw/CH p buttons to select memorized
channels.To select non-memorized channels, use the
Number buttons.
• To stop the Channel Setup while
AUTO SET UP is flashing, press
DISC/MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 18
18 Video Cassette Playback
Read and follow the steps below to play a tape.
Turn on the TV.
1
2
Turn on theTV. Set it to channel 3 or 4 or its
Insert a tape in the
DVD/VCR.
AUDIO/VIDEO IN channel. This depends on how you
1
connected the DVD/VCR to a TV.
Details are on pages 7-15.
STANDBY-ON
With the DVD/VCR power off, insert a tape in the
TIMER SET
cassette compartment of the DVD/VCR. TheVCR
2
SETUP
REC
AUDIO SUBTITLE ANGLE
light will appear on the front of the DVD/VCR. If the tape’s
REPEAT
REPEAT
A-B
record tab has been removed, play will start automatically.
If the DVD/VCR power is already on, pressVCR to put the
DVD/VCR inVCR mode if necessary.TheVCR light will
appear on the front of the DVD/VCR.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
DISPLAY
If playback does not start automatically, pressVCR,
then press PLAY B.
VCR
DVD
DISC
3
MENU
OK
Press STOP C to stop playback.
4
STOP
PLAY
4
5
Press SEARCH/REWh to rewind the tape.
5
3
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
After the tape stops, press STOP/EJECT C A on the
front of the DVD/VCR to remove the tape.
1
2
3
6
9
SLOW
6
4
7
5
8
0
ZOOM SEARCH MODE
+10
Press STOP/EJECT C A on
the DVD/VCR.
6
Helpful Hints
• Other tape playback features are
on pages 40-47.
• If AUTO REPEAT is ON, playback will
begin when you insert a tape, even
when the record tab is intact. Details
are on page 40.
• You must connect the DVD/VCR to
aTV using the RF coaxial cable or
the audio/video cables in order to
use theVCR features.These hookups
are explained on pages eight and
11.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 19
Disc Playback 19
Before you begin, turn on the TV, Stereo, and other equipment
connected to the DVD/VCR. Make sure the TV and the Stereo (if
applicable) are set to the correct channel.
STANDBY-ON
TIMER SET
Details are on pages 7-15.
1
SETUP
REC
AUDIO SUBTITLE ANGLE
Press STANDBY-ON to turn on the DVD/VCR.
1
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
Press DVD to put the DVD/VCR in DVD mode.The DVD
TITLE
MODE
RETURN
light will appear on the front of the DVD/VCR.
2
DISPLAY
VCR
DVD
DISC
Press OPEN/CLOSE A (to the left of the disc tray on
the front of the DVD/VCR) to open the Disc tray.
2
5
MENU
OK
3
Place a Disc into the tray. If the DVD is recorded on
STOP
PLAY
only one side, place the Disc in the tray with the label fac-
4
ing up and the shiny side facing down. Some DVDs are
6
recorded on both sides. Make sure the label of the side you
want to play is facing up.
SEARCH
REW
SEARCH
FF
PAUSE
Press PLAY B. The tray will close and play will begin at
Press OPEN/CLOSE
on the DVD/VCR.
A
the first Chapter or Track. If a DVD menu appears instead,
5
3
4
see page 48. With some Audio CDs, playback will not begin
unless you press PLAY B.
Or, press OPEN/CLOSE A or press the tray toward the
DVD/VCR to close the tray.
Insert a Disc.
With MP3 and JPEG files, playback will begin from the
beginning of the disc.
Press STOP C to stop playback.
6
Helpful Hints
• An “X” may appear at the top right
corner of theTV screen when you
try a feature. Either the feature is
not available on the Disc, or the
DVD/VCR cannot access the feature
at this time.This does not indicate a
problem with the DVD/VCR.
• If a Disc is dirty or scratched, the
picture may appear distorted or
playback may stop. Remove the Disc
and turn off the DVD/VCR.
Disconnect the power cord, then
reconnect it. Clean the Disc, then
turn on the DVD/VCR again and
reinsert the Disc for playback.
• When the DVD or CD light appears
on the display panel, the Disc is
loaded and ready for playback.
• When you press OPEN/CLOSE A or
PLAY (DVD) on the front of the
DVD/VCR when the power is off, the
DVD/VCR will turn on in DVD mode.
Otherwise, the DVD/VCR will turn on
in the mode in which it was turned
off.
Remember, this DVD/VCR
will play only certain Discs.
See page six for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 20
20 Display Panel (DVD)
DVD Light
Display
This light appears when the DVD/VCR is
in DVD mode.You can only watch DVDs
when the DVD light is on.To make the
DVD light come on, press SOURCE on
the front of the DVD/VCR or DVD on
the remote.
Messages about current Disc
operations appear here.
See Display Messages below.
Disc tray
Insert a Disc here.
DVD VIDEO/VCR COMBI MDV540VR
STANDBY-ON
4 HEAD HI-FI STEREO
ONETOUCH RECORDING LONG PLAY
•
OPEN/
CLOSE
POWER ON
VCR
DVD
REW
F.FWD STOP/EJECT PLAY
RECORD
CHANNEL
STOP
PLAY
L
–
AUDIO
–
R
PROGRESSIVE SCAN
VIDEO
SOURCE
Appears when
Repeat is active
Appears when
Progressive Scan
is active
GROUP
P.SCAN
Appears when A-B
Repeat is active
DVD
VCD
Displays the type of Disc in
the tray.
• DVD: DVD
• CD:Audio CD, MP3, JPEG
•VCD:Video CD
Appears when ALL
Repeat is active
Displays the elapsed playing time of the cur-
rentTitle orTrack; briefly displays aTrack,
Chapter, orTitle number when play begins.
Appears when Disc
play is paused
Appears during Disc play
Appears during
slow motion play
(DVD,Video CD)
Display Messages
Appears after the disc tray closes if the tray is empty, if
there is an error reading the disc, or if an unacceptable
disc is installed.
Tray is opening or is open.
Tray is closing.
Disc is loading.
Appears when Playback Control is active (Video CD)
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 21
Display Panel (VCR) 21
VCR light
This light appears when the DVD/VCR is inVCR
mode.You can only watch videotapes or access
VCR features and TV channels when theVCR light
is on.To make theVCR light come on, pressVCR
on the remote control or SOURCE on the front
of the DVD/VCR.
Cassette Compartment
Insert a video cassette here.
DVD VIDEO/VCR COMBI MDV540VR
STANDBY-ON
4 HEAD HI-FI STEREO
ONETOUCH RECORDING LONG PLAY
•
OPEN/
CLOSE
POWER ON
VCR
DVD
REW
F.FWD STOP/EJECT PLAY
RECORD
CHANNEL
STOP
PLAY
L
–
AUDIO
–
R
PROGRESSIVE SCAN
VIDEO
SOURCE
IndicatesVCR position
Indicates a tape
is in theVCR
Appears when a timer
recording or an OTR
has been set
VCR
REC
Appears if
Repeat Play
is active
PM
Appears during record-
ing; flashes when
recording is paused.
Indicates current
time is P.M.There is
no A.M. indication.
Appears if tape
play is paused or
during slow
motion tape play
Appears during
tape play
Indicates the elapsed playing time
of a tape; also displays a channel
number, tape speed, remaining time
for an OTR, or the current time.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 22
22 Front Panel
AUDIO andVIDEO In Jacks
Connect audio and video cables from a camcorder,
VCR, etc.This will be useful if you want to copy a
videotape or watch material that is playing on
other equipment. Details are on page 35.
POWER ON Light
Appears when the DVD/VCR power is on
STANDBY-ON y Button
Press to turn the power on or off.
CHANNEL op Buttons
Press to selectTV channels
at theVCR.
OPEN/CLOSE A Button (DVD)
Press to open or close the Disc tray.
DVD VIDEO/VCR COMBI MDV540VR
STANDBY-ON
4 HEAD HI-FI STEREO
ONETOUCH RECORDING LONG PLAY
•
OPEN/
CLOSE
POWER ON
VCR
DVD
REW
F.FWD STOP/EJECT PLAY
RECORD
CHANNEL
STOP
PLAY
L
–
AUDIO
–
R
PROGRESSIVE SCAN
VIDEO
SOURCE
PLAY B Button (DVD)
Press to start Disc playback.
Details are on page 19.
Press and hold for more
than five seconds to disable
or enable Progressive Scan.
Details are on pages seven
and 64-65.
REW
h
Button (VCR)
Press to rewind
the tape. Details
are on page 43.
F.FWD
Button (VCR)
g
Press to fast forward
the tape. Details are
on page 43.
STOP C Button (DVD)
Press to stop Disc playback.
Details are on page 19.
STOP/EJECT
C
A
Button (VCR)
SOURCE Button
Press once to stop
tape playback.When
play is stopped, press
to eject the tape.
Press to select DVD mode orVCR
mode.The DVD light appears in
DVD mode.TheVCR light appears
inVCR mode.
PLAY B Button (VCR)
Press to play a video cassette.
Press to release Slow, Search, or
Still mode and return to playback.
Details are on page 43.
Remote Sensor
Receives a signal from your remote
control so you can work your
DVD/VCR from a distance. Point the
remote control here, not at yourTV.
RECORD I button (VCR)
Press once to start a recording. Press
repeatedly to start a One-Touch
Recording. Details are on page 34.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 23
Rear Panel 23
VCR AUDIO IN andVIDEO IN jacks
(red, white, yellow)
Connect audio and video cables from a camcorder,
VCR, etc., here. Details are on page 35. This will be
useful if you want to copy a videotape or watch
material that is playing on other equipment.
DVD/VCR AUDIO OUT and VIDEO OUT
Jacks (red, white, yellow)
Connect the supplied audio and video cables
here and to aTV’s Audio andVideo In jacks.This
supplies sound and picture for both theVCR and
the DVD Player. Details are on page 11.
ANT-OUT
(Antenna Out) Jack
Use the supplied RF coaxial
cable to connect this jack to
the ANTENNA IN jack on
yourTV, Cable Box, or
Satellite Receiver. Details are
on pages 8-10.
DVD AUDIO OUT jacks
Left (white), Right (red)
Connect the supplied audio cables
here and to the Audio In jacks of a
TV or Stereo.These jacks only sup-
ply audio for the DVD Player. Use
these if you want a secondary con-
nection between the DVD Player
and anotherTV, etc.
ANT-IN
(Antenna In) jack
Connect your anten-
na or CableTV signal
here. Details are on
pages 8-15.
DVD
DVD/VCR VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT AUDIO IN
OUT
OUT
ANT-IN
AUDIO OUT
Y
L
L
L
C
B
/
/
R
R
P
B
COAXIAL
VIDEO OUT VIDEO IN
ANT-OUT
R
C
R
P
R
AC Power Cord
Connect to a standard
AC outlet to supply
power to the DVD/VCR.
DVD COAXIAL DIGITAL
AUDIO OUT Jack (black)
Connect a coaxial digital audio cable
(not supplied) here and to a Stereo’s
Coaxial Digital Audio In jack.This
supplies audio only for the DVD
Player. Details are on page 15.
DVD S-VIDEO OUT Jack
Connect an S-Video cable (not sup-
plied) here and to aTV’s S-Video In
jack.This supplies the picture only for
the DVD Player. Details are on page 13.
Helpful Hint
• The DVD S-VIDEO OUT, DVD
COMPONENTVIDEO OUT, DVD AUDIO
OUT and DVD COAXIAL DIGITAL AUDIO
OUT jacks are only useful in DVD mode.To
have sound and picture inVCR mode, you
must connect either the RF coaxial cable or
the audio/video cables supplied, using the
DVD/VCR AUDIO OUT andVIDEO OUT
jacks. Details are on pages eight and 11.
DVD COMPONENTVIDEO OUT Jacks
(Y CB/PB CR/PR) (green, blue, red)
Connect component video cables (not sup-
plied) here and to the ComponentVideo In
jacks of aTV.This supplies the picture only for
the DVD Player. Details are on page 12.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 24
24 Remote Control
TIMER SET Button
STANDBY-ON y Button
Press to turn the power on or
off.
Press to set a timer recording
that you have programmed.
Details are on pages 36-38.
ANGLE Button
STANDBY-ON
SETUP Button
Press to access or remove the
DVD Player’s Setup menu.
TIMER SET
Press to see a DVD picture
from a different angle. Details
are on page 55.
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
REC(ord) I Button
Press to start aVCR record-
ing. Details are on page 32.
Press repeatedly to start a
One-Touch Recording.
A-B REPEAT Button
Press to set up A-B Repeat.
Details are on page 53.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
RETURN Button
Details are on page 34.
DISPLAY
Press to return to the previ-
ous level of the DVD Player’s
Setup menu or to remove the
Setup menu.
REPEAT Button
VCR
DVD
DISC
Press to play a Track,Audio
CD,Title, or Chapter repeat-
edly. Details are on page 53.
MENU
OK
DVD Button
TITLE Button
Press before using the remote
control for DVD features.
Press to put the DVD/VCR in
DVD mode.
Press to see a DVD Title
menu. Details are on page 48.
STOP
PLAY
VCR Button
SEARCH
REW
SEARCH
FF
Press before using the remote
control forVCR features.
Press to put the DVD/VCR in
VCR mode.
PAUSE
PLAY B Button
Press to begin Disc or tape
playback.
NA508
SPEED
1
2
3
6
9
SLOW
STOP C Button
Press to stop Disc playback,
tape playback, or recording.
4
7
5
8
0
SEARCH/FF
g
(Fast Forward) Button
In DVD mode, press to fast
forward the Disc. Details are
on page 49. Press when DVD
orVideo CD playback is
paused to start slow motion
playback. Details are on page
59.
ZOOM SEARCH MODE
SEARCH/REW
(Rewind) Button
h
+10
Press to fast reverse a DVD or
Audio CD. Details are on page
49. Press when DVD playback
is paused to start reverse slow
motion playback. Details are on
page 59. Press to rewind a
tape. Details are on page 43.
InVCR mode, press to fast
forward the tape. Details are
on page 43.
PAUSE k Button
SLOW Button
Press to pause Disc playback.
Press repeatedly to advance
the DVD orVideo CD picture
step by step (or one frame at
a time). Details are on page 52.
Press to pause or resumeVCR
recording. Details are on page
32. Press to pause a tape.
Details are on page 43.
Press to view a videotape in
slow motion. Details are on
page 43.
SEARCH MODE Button
In DVD mode, press to search
for a specific
Title/Chapter/Track/Time. Details
are on pages 50-51.
InVCR mode, press for aTime
Search or an Index Search.
Details are on page 42.
In DVD mode, press to set
Markers. Details are on page 54.
Helpful Hints
• For DVD Player features, press DVD before pressing other buttons.To
put the DVD/VCR in DVD mode, press DVD or SOURCE so the DVD
light appears on the front of the DVD/VCR.
• ForVCR features, pressVCR before pressing any other buttons.To put
the DVD/VCR inVCR mode, pressVCR or SOURCE so theVCR light
appears on the front of the DVD/VCR.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 25
Remote Control (cont’d) 25
AUDIO Button
SUBTITLE Button
Press to select a language for
DVD subtitles. Details are on
page 55.
Press to choose a DVD audio
language or an Audio CD
sound mode.
STANDBY-ON
Details are on page 58.
NEXT ∑/CH o,PREVw/
TIMER SET
CH p Buttons
C-RESET/CLEAR Button
Press to removeVCR menus.
Press to reset the tape counter.
Details are on page 41.
Press to reset a menu item in
DVD mode.
SETUP
REC
AUDIO SUBTITLE ANGLE
In DVD mode, press to skip
Chapters orTracks. InVCR
mode, press to changeTV
channels at the DVD/VCR.
Press to adjust videotape track-
ing. Details are on page 48.
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
MODE Button
DISPLAY
DISPLAY Button
VCR
DVD
Press to set a Program. Details
are on page 60. Press to start
Random playback.
InVCR mode, press to see sta-
tus displays. Details are on page
31. In DVD mode, press to
access Disc information. Details
are on page 69.
DISC
MENU
OK
Details are on page 61.
STOP
PLAY
OK Button
Press to confirm or select
menu items.
DISC/MENU Button
Press to access or remove a
DVD Disc menu.
SEARCH
REW
SEARCH
FF
PAUSE
s
BKL Buttons
SPEED Button
NA508
SPEED
Press to select an item in a
menu.
Press to select theVCR’s
recording speed (SP or SLP).
Details are on pages 32, 35, and
72.
1
2
3
6
9
SLOW
4
7
5
8
0
Number Buttons
VCR/TV Button
In DVD mode, press to select a
Track or Chapter for playback.
Use the +10 button for items
10 and above. Details are on
page 51.
ZOOM SEARCH MODE
Press to selectVCR orTV posi-
tion. InVCR position, watch a
tape or watch/recordTV pro-
grams (changing channels at the
VCR).
+10
InVCR mode, use to selectTV
channels. Enter channel num-
bers as a two-digit number for
the quickest results (to select
channel 6, press 0,6). For chan-
nels 100 and above, enter a
three-digit number (for channel
117, press 1, 1, 7). If you have
CableTV, channels 1-125 may
be available. If you have an
antenna, channels 2-69 may be
available.The +10 button has no
effect inVCR mode.
UseTV position to watchTV
channels (changing channels at
theTV) or watch one program
while recording another.
Details are on page 33.
ZOOM Button
Press to enlarge the DVD,
Video CD, or JPEG image.
Details are on page 59.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 26
26 Channel Setup
Although your DVD/VCR may automatically memorize the
channels you receive when you turn it on for the first time, you
can set up the channels again.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
PressVCR, then press DISC/MENU so MENU
appears.
REPEAT
REPEAT
A-B
1
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
- M E N U -
4
TITLE
MODE
RETURN
B TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
DISPLAY
VCR
DVD
LANGUAGE SELECT
AUDIO OUT
TV STEREO
DISC
MENU
[ON]
1
OK
SAP
STOP
PLAY
2-3
Press o or p to select CHANNEL SET UP.Then,
SEARCH
REW
SEARCH
FF
press B.
PAUSE
2
NA508
SPEED
- M E N U -
1
2
3
6
9
TIMER PROGRAMMING
SLOW
AUTO REPEAT
B CHANNEL SET UP
CLOCK SET
[OFF]
4
7
5
8
0
LANGUAGE SELECT
AUDIO OUT
TV STEREO
ZOOM SEARCH MODE
[ON]
+10
SAP
Press o or p to select AUTO SET UP. Press B.
3
4
CHANNEL SET UP
B AUTO SET UP
MANUAL SET UP
AUTO SET UP will flash while the DVD/VCR sets up the
available channels.When setup is complete, the lowest avail-
able channel will appear on theTV.
Now when you press NEXT ∑/CH o or PREV w/CH
p, you will scan only through available channels.You still can
select any channel using the Number buttons.
Helpful Hints
CH01
• You cannot program channels if
you are using a Cable Box or
Satellite Receiver.
AUTO SET UP
• If you have an antenna, only chan-
nels 2-69 will be possible. If you
have CableTV, channels 1-125 will
be possible.
• To stop Channel Setup, press
DISC/MENU while AUTO SET UP
is flashing.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 27
Channel Setup (cont’d) 27
Adding/Deleting Channels
You may want to add or delete TV channels if your channel
lineup changes or if you no longer watch some channels.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
PressVCR, then press DISC/MENU so MENU
REPEAT
REPEAT
A-B
appears.
1
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
6
Press o or p to select CHANNEL SET UP, then
press B.
TITLE
MODE
RETURN
2
DISPLAY
VCR
DVD
1
2-5
Press o or p to select MANUAL SET UP, then
press B.
DISC
MENU
OK
3
CHANNEL SET UP
AUTO SET UP
STOP
PLAY
B MANUAL SET UP
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
1
2
3
6
9
SLOW
4
7
5
8
0
Press o or p until the channel number you want
to add or delete appears on the screen.
ZOOM SEARCH MODE
4
+10
MANUAL SET UP
CHANNEL 30 (CATV)
ADD
Press B or s so ADD or DELETE flashes on the
screen.
5
6
While your choice is flashing, press
C-RESET/CLEAR. The channel you added or deleted
will be the current channel.Added channels are available
when you flip through channels using the NEXT ∑/CH
o or PREV w/CH p buttons.You still can select delet-
ed channels with the Number buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 28
28 Clock (VCR)
Follow these steps to set theVCR clock. Make sure:
● The DVD/VCR is on and inVCR mode. PressVCR so the
VCR light appears on the front of the DVD/VCR.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
PressVCR, then press DISC/MENU so MENU
appears.
REPEAT
REPEAT
A-B
1
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
- M E N U -
TITLE
MODE
RETURN
B TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
DISPLAY
VCR
DVD
LANGUAGE SELECT
AUDIO OUT
TV STEREO
DISC
MENU
[ON]
OK
1
2-5
SAP
STOP
PLAY
Press o or p to select CLOCK SET. Press B.
2
3
SEARCH
REW
SEARCH
FF
PAUSE
While the MONTH space is flashing, press o or
p until the month appears.Then, press B.
NA508
SPEED
1
2
3
6
9
SLOW
4
7
5
8
0
CLOCK SET
MONTH DAY
0 3 – –
YEAR
– – – –
/
ZOOM SEARCH MODE
+10
HOUR MINUTE
– – – –
AM/PM
– –
:
While the DAY space is flashing, press o or
until the day appears.Then, press B.
p
4
5
CLOCK SET
MONTH DAY
0 3 2 0
YEAR
/
– – – –
HOUR MINUTE
– – – –
AM/PM
– –
:
While theYEAR space is flashing, press o or
until the year appears. Press B. The day of the
week will appear automatically.
p
CLOCK SET
MONTH DAY
0 3 / 2 0 SAT
YEAR
2 0 0 4
Helpful Hints
• If the clock has never been set,
the CLOCK SET menu may
appear when you press
HOUR MINUTE
– – : – –
AM/PM
– –
DISC/MENU. If so, follow the
instructions from step 3 above.
• Press DISPLAY until the time
appears on theTV screen.
• Power failures of more than 30
seconds can erase the clock set-
ting.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 29
Clock (VCR) (cont’d) 29
STANDBY-ON
TIMER SET
While the HOUR space is flashing, press o or
p
until the hour appears.Then, press B.
SETUP
REC
AUDIO SUBTITLE ANGLE
6
7
8
CLOCK SET
REPEAT
REPEAT
A-B
MONTH DAY
0 3 / 2 0 SAT
YEAR
2 0 0 4
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
9
HOUR MINUTE
0 5 : – –
AM/PM
– –
TITLE
MODE
RETURN
DISPLAY
VCR
DVD
DISC
MENU
OK
While the MINUTE space is flashing, press o or
STOP
PLAY
p until the minute appears.Then, press B.
6-9
CLOCK SET
SEARCH
REW
SEARCH
FF
MONTH DAY
0 3 / 2 0 SAT
YEAR
2 0 0 4
PAUSE
NA508
SPEED
HOUR MINUTE
0 5 : 4 0
AM/PM
– –
1
2
3
6
9
SLOW
4
7
5
8
0
ZOOM SEARCH MODE
+10
While the AM or PM space is flashing, press o or
p to point to AM or PM.
Your selection will flash on the screen in the AM/PM
space.
CLOCK SET
MONTH DAY
0 3 / 2 0 SAT
YEAR
2 0 0 4
HOUR MINUTE
0 5 : 4 0
AM/PM
AM
B PM
P M
Press C-RESET/CLEAR or B to start the clock.
9
Helpful Hint
• To reset the clock, follow steps 1-
2 on page 28. Select the infor-
mation you want to change using
B or s. When the information
is flashing, use o or p to enter
the correct information. Press
C-RESET/CLEAR to set the clock.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 30
30 Language (VCR)
Follow the steps below to change the language of theVCR on-
screen displays and menus.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
PressVCR, then press DISC/MENU so MENU
appears.
REPEAT
REPEAT
A-B
1
- M E N U -
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
B TIMER PROGRAMMING
4
1
2-3
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
TITLE
MODE
RETURN
DISPLAY
LANGUAGE SELECT
AUDIO OUT
TV STEREO
VCR
DVD
DISC
[ON]
SAP
MENU
OK
STOP
PLAY
Press o or p to choose LANGUAGE SELECT,
then press B.
2
3
4
SEARCH
REW
SEARCH
FF
PAUSE
- M E N U -
NA508
SPEED
TIMER PROGRAMMING
1
2
3
6
9
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
SLOW
4
7
5
8
0
B LANGUAGE SELECT
AUDIO OUT
TV STEREO
[ON]
SAP
ZOOM SEARCH MODE
+10
Press o or p to choose ENGLISH, FRANCAIS
(French), or ESPAÑOL (Spanish).
LANGUAGE SELECT
B ENGLISH
FRANCAIS
ESPAÑOL
[ON]
Press C-RESET/CLEAR to remove the menu.
Helpful Hint
• If you select FRANCAIS (French),
or ESPAÑOL (Spanish) and need
English:
1) Press DISC/MENU so MENU
appears.
2) Press p to choose SELECTION
LANGUE or SELEC. IDIOMA, then
press B.
3) Press o or p to select ENGLISH.
4) Press C-RESET/CLEAR.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 31
VCR Status Displays 31
You may access status displays by pressing DISPLAY.The displays
may include the current time, channel, and other information.
STANDBY-ON
TIMER SET
Press DISPLAY. The COUNT display will appear for five
SETUP
REC
AUDIO SUBTITLE ANGLE
seconds.After five seconds, only the real-time tape counter
1
REPEAT
REPEAT
A-B
will appear.This counter shows you the elapsed playing
time of the tape (from the point at which the counter was
set to zero).The counter also will appear on the display
panel on the front of the DVD/VCR.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
DISPLAY
VCR
DVD
STOP
1-3
DISC
MENU
OK
SLP
0:12:34
HIFI
STOP
PLAY
SEARCH
REW
SEARCH
FF
PAUSE
Press DISPLAY again. The CLOCK display will appear
for five seconds.After five seconds, only the time will
appear (the clock must be set). (If you are watching TV, the
channel number and the availability of stereo or second
audio will also appear.) The time also will appear on the
display panel on the front of the DVD/VCR.
NA508
SPEED
1
2
3
6
9
2
3
SLOW
4
7
5
8
0
ZOOM SEARCH MODE
+10
STOP
5:40 PM
CH 02
STEREO
SAP
SLP
Press DISPLAY again to remove all the displays.
Helpful Hints
• If the channel you select has no
broadcast, the screen will be solid
blue.
• You cannot access a status dis-
play when viewing a still picture,
during slow motion, or during for-
ward and reverse searching.
• Channel numbers appear on the
screen for a few seconds each
time you change channels.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 32
32 Videotape Recording
Read and follow the steps below to record a television pro-
gram onto a videotape. Before you begin, make sure the
DVD/VCR is inVCR mode. PressVCR so theVCR light appears
on the front of the DVD/VCR.
Turn on the TV.
1
2
Insert a tape in the
DVD/VCR.
Turn on theTV and set it to channel 3 or 4 or
theVideo In channel. If you connected the DVD/VCR
1
STANDBY-ON
TIMER SET
to the TV using the supplied audio and video cables,
select your TV’sVideo In channel. Details are on page 11.
If you connected the DVD/VCR to the TV using the
supplied RF coaxial cable, choose channel 3 (or 4) at
the TV. Details are on pages 8-10.
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
5-6
Insert a tape with its record tab intact into the
TITLE
MODE
RETURN
cassette compartment of the DVD/VCR. If tape
4
6
2
3
4
5
6
7
DISPLAY
play begins, press STOP C.
VCR
DVD
DISC
MENU
OK
Press SPEED until the desired tape speed (SP or
SLP) appears briefly on theTV screen. Details
about tape speed are on page 72.
STOP
PLAY
Press NEXT ∑/CH o or PREV w/CH p or the
7
4
Number buttons to select theTV channel to
SEARCH
REW
SEARCH
FF
PAUSE
record.
NA508
SPEED
1
2
3
6
9
Press REC I to start recording. The REC light will
appear on the front of the DVD/VCR.
SLOW
3
4
7
5
8
0
To pause the recording, press PAUSE k once.
ZOOM SEARCH MODE
REC will flash. To resume recording, press REC
or PAUSE k again. REC will reappear.
I
+10
To stop recording, press STOP C.
Helpful Hints
• Other recording options are on
pages 33-39.
• TheVCR will record in a preset vol-
ume.
Recording Prevention
• Pause will switch to Stop after five
minutes to protect theVCR and
the tape from damage.When a
recording is paused, review the
pause time remaining with the ■
marks on the screen. Each ■
mark equals one minute remain-
ing. During the last minute of
paused recording, the ■ mark will
flash.
• If any menu is on theTV screen,
the REC I button on the remote
does not function. Press C-
RESET/CLEAR to remove the
menu.Then, press REC I. Or, use
the RECORD I button on the
front of the DVD/VCR.
Video cassettes have record tabs to ensure that recordings are
not accidentally erased.
To prevent recording, break off the tab with a
screwdriver.
1
2
To allow recording, cover the hole with clear
tape.
Remove the
Cover the
tab to prevent
hole to allow
recording.
recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 33
Recording One Channel/Watching Another 33
PressVCR, then press REC I to record the cur-
rentTV channel. Details are on page 32.
STANDBY-ON
TIMER SET
1
2
3
4
SETUP
REC
AUDIO SUBTITLE ANGLE
PressVCR/TV once to put the DVD/VCR inTV
position. TheVCR light will disappear from the
DVD/VCR’s display panel.
REPEAT
REPEAT
A-B
C-RESET
CLEAR
1
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
Use theTV remote control to select the channel
you want to watch at theTV.
DISPLAY
VCR
DVD
DISC
To return to the channel being recorded, use the
TV remote control to reselect channel 03 or 04
at theTV. Details are on page eight. Or, if you connected
the DVD/VCR to the TV using audio and video cables,
reselect the TV’s correctVideo In channel. Details are on
page 11.
MENU
OK
STOP
PLAY
6
SEARCH
REW
SEARCH
FF
PAUSE
PressVCR/TV on the DVD/VCR remote control
to put the DVD/VCR inVCR position. The channel
being recorded will appear on the TV screen.
NA508
SPEED
1
2
3
6
9
5
6
SLOW
4
7
5
8
0
Press STOP C to stop the recording.
2,5
ZOOM SEARCH MODE
+10
Select the channel you
want to watch at the TV.
3
4
Reselect channel 03, 04, or
Video In at the TV.
Helpful Hint
• If you use a Cable Box or Satellite
Receiver, you may not be able to
watch one channel while recording
another. See pages 9-10 for
details.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 34
34 One-Touch Recording
One-Touch Recording (OTR) lets you set a timed recording 30
minutes to eight hours long. Before you begin:
● Place the DVD/VCR inVCR mode. PressVCR so theVCR light
appears on the front of the DVD/VCR.
● Select a recording speed (SP, SLP) with the SPEED button.
● Put a videotape in the cassette compartment. Make sure the
tape’s record tab is intact and the tape is long enough to record
the program(s).
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
C-RESET
CLEAR
2
1
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
o
or the Number buttons to select the chan-
PressVCR, then press NEXT∑/CH
or PREVw
DISPLAY
VCR
DVD
p
/CH
DISC
1
2
nel you want to record.
MENU
OK
Press REC I repeatedly until the desired recording
length (30 minutes to eight hours) appears on the
STOP
PLAY
TV screen. Recording will begin. REC and
on the DVD/VCR’s display panel.
will appear
SEARCH
REW
SEARCH
FF
PAUSE
OTR (0:30)
NA508
SPEED
1
2
3
6
9
SLOW
4
7
5
8
0
ZOOM SEARCH MODE
SP
+10
Stopping an OTR
To stop an OTR before recording is finished, press STOP C on the
remote control or STOP/EJECT C A on the front of the
DVD/VCR.
To cancel the OTR but continue recording, press REC I repeated-
ly until RECORD appears in the upper left corner of the TV
screen.
When an OTR finishes, the DVD/VCR will either switch to DVD
mode or turn itself off. If it changes to DVD mode, press STAND-
y to turn it off.
BY-ON
After an OTR,
flashes because theVCR is still on standby for
timer recordings. Press TIMER SET on the remote or STOP/EJECT
C A on the DVD/VCR to cancel timer standby and use theVCR
normally again.
Helpful Hints
• The remaining recording time will
appear on the display panel. Press
DISPLAY to see it on theTV
screen.
• To change the recording length
while an OTR is in progress, press
REC I.
• You cannot pause an OTR.
• If the preset time for a timer
recording comes up during an
OTR, the OTR has priority.The
timer recording will not take place.
• If the end of the tape is reached
during an OTR, theVCR will stop
recording, eject the tape, and
switch to DVD mode or turn off.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 35
Rerecording (Tape Duplication) 35
These instructions show you how to copy videotapes.The illustration uses two DVD/VCRs. OtherVCRs or
Camcorders may operate differently.
1. Audio cables from DVD/VCR AUDIO OUT jacks (red and
white) of DVD/VCR 1 toVCR AUDIO IN jacks of DVD/VCR 2
DVD
DVD/VCR VCR
COPNENT
DIGITAL
AUDIO S-VIDE
AUDIO OUT AUDIO IN
OUT
OUT
ANT-IN
AUDIO OUT
L
L
L
/
R
R
P
B
COAXIAL
VIDEO OUT VIDEO IN
ANT-OUT
R
C
R
P
R
DVD/VCR 1
Playing unit
2.Video cable from yellow DVD/VCR
VIDEO OUT jack of DVD/VCR 1 to
VCRVIDEO IN jack of DVD/VCR 2
DVD
DVD/VCR VCR
COMPONEN
VIDEO OU
DIGITAL
AUDIO S-VIDEO
OUT AUDIO IN
OUT OUT
ANT-IN
AUDIO OUT
Y
L
L
C
B
/
/
R
R
P
B
COAXIAL
VIDEO OUT VIDEO IN
ANT-OUT
R
C
R
P
R
DVD/VCR 2
Recording unit
3. RF coaxial cable from the ANT-OUT
(Antenna Out) jack of DVD/VCR 2
to theTV’s ANTENNA IN jack
Make the connections shown above.
1
2
3
4
5
DVD/VCR 1 will play your tape. Put a prerecorded tape
into the cassette compartment of DVD/VCR 1.
PressVCR to put the unit inVCR mode if necessary.
DVD/VCR 2 will record your tape. Insert a blank tape in
the cassette compartment of DVD/VCR 2. PressVCR
to put the unit inVCR mode if necessary.
Turn on theTV and set it to channel 03 or 04 (the
RF output channel of DVD/VCR 2).To determine the
DVD/VCR’s output channel, see step 4 on page eight.
Helpful Hints
• If you use the AUDIO andVIDEO
IN jacks on the back of DVD/VCR
2, press Number buttons 0, 0, 1 at
step 5. L1 will appear on theTV
screen.
Point the remote control at DVD/VCR 2. Press
Number buttons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at
right.)
• If you use the AUDIO andVIDEO In
jacks on the front of DVD/VCR 2,
press Number buttons 0, 0, 2 at
step 5. L2 will appear on theTV
screen.
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• If a program has copyright protec-
tion, it may not record clearly.
Press SPEED to select SP or SLP at DVD/VCR 2.
6
7
Press PLAY B (VCR) on the front of DVD/VCR 1
and RECORD I on the front of DVD/VCR 2 at the
same time.
To stop recording, press STOP/EJECT C A on DVD/VCR 1,
then press STOP/EJECT C A on DVD/VCR 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 36
36 Timer Recording
Follow the steps below to program theVCR to record TV pro-
grams while you’re away from home. Before you begin:
● Set up the TV channels at the DVD/VCR. Details are on page 26.
● Set the clock. Details are on pages 28-29.
● Put a tape in the cassette compartment. Make sure the tape’s
record tab is intact and the tape is long enough to record the
program(s).
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
● PressVCR so theVCR light appears on the front of the
DVD/VCR.
TITLE
MODE
RETURN
DISPLAY
VCR
DVD
DISC
Press DISC/MENU so MENU appears.
1
MENU
OK
1
2-4
Press o or p to selectTIMER PROGRAMMING.
STOP
PLAY
Then, press B. Program numbers that do not have a
2
timer recording stored will flash.
SEARCH
REW
SEARCH
FF
PAUSE
TIMER PROGRAMMING
NA508
SPEED
PROG.
DATE
12345678
1
2
3
6
9
SLOW
START TIME
END TIME
CHANNEL
REC SPEED
4
7
5
8
0
ZOOM SEARCH MODE
+10
Press o or p to select an empty program.Then,
press B.
3
4
PROGRAM NUMBER
1
DATE
– – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL
REC SPEED
– –
– –
Press o or p to select ONCE, DAILY, or WEEKLY.
Then, press B.
● ONCE - TheVCR will record a TV program on any day
you choose, up to 12 months away.
● DAILY - TheVCR will record a TV program at the same
time on the same channel every day, Monday through
Friday.
Helpful Hints
• You cannot access theTIMER PRO-
GRAMMING menu at step 2 if the
clock is not set.The CLOCK SET
menu will appear. Follow the steps
on pages 28-29 to set the clock.
• Only programs that will air Monday-
Friday can be recorded on a DAILY
basis. If you select DAILY at step 4,
then enter a Saturday or Sunday
DATE at step 5, the correct program
will not record.TheVCR will alter the
recording date and record a differ-
ent program than the one you
intended.
● WEEKLY - TheVCR will record a TV program at the
same time on the same channel every week, for example,
every Monday.
PROGRAM NUMBER
1
B ONCE
DAILY
WEEKLY
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 37
Timer Recording (cont’d) 37
STANDBY-ON
To enter the recording date, press o or p until the
TIMER SET
month appears.Then, press B.
SETUP
REC
AUDIO SUBTITLE ANGLE
5
Next, press o or p until the day appears.Then,
press B. The day of the week will appear. You cannot
REPEAT
REPEAT
A-B
record more than one year in advance.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
ONE TIME PROGRAM
TITLE
MODE
RETURN
PROGRAM NUMBER
1
DISPLAY
DATE
0 5 / 0 4 TUE
START TIME – – : – – – –
END TIME – – : – – – –
VCR
DVD
DISC
CHANNEL
– –
MENU
OK
REC SPEED – –
5-8
STOP
PLAY
To enter the recording’s start time, press o or p until
the hour appears. Press B.
SEARCH
REW
SEARCH
FF
PAUSE
6
Press o or p until the minute appears. Press B.
Finally, press o or p to point to AM or PM. AM or
PM will flash beside the start time. Press B.
NA508
SPEED
1
2
3
6
9
SLOW
4
7
5
8
0
ONE TIME PROGRAM
PROGRAM NUMBER
1
ZOOM SEARCH MODE
DATE
0 5 / 0 4 TUE
+10
START TIME 0 7 : 3 0 P M
END TIME – – : – – – –
CHANNEL
– –
REC SPEED – –
AM
BP M
Repeat the procedure in step 6 to set the record-
ing’s end time.
7
8
Press o or p until the channel number appears.
Then, press B.
● If you are using a standard antenna/Cable TV hookup (as
shown on page eight), select the channel of the TV pro-
gram you want to record.
● If you are recording from other equipment, select L1 or
L2.To determine L1 or L2, see the Helpful Hints at right.
● If you are using a Cable Box/Satellite Receiver, select the
Cable Box/Satellite Receiver output channel (03 or 04).
Then, at the Cable Box/Satellite Receiver, select the
channel you want to record. Leave the Cable
Box/Satellite Receiver on for the timer recording. Details
are on page nine.
Helpful Hints
• If you are recording from other
equipment, set CHANNEL to L1 or
L2 at step 8. If you connected the
other equipment to the AUDIO and
VIDEO In jacks on the front of the
DVD/VCR, choose L2. If you con-
nected the equipment to the AUDIO
IN andVIDEO IN jacks on the back
of the DVD/VCR, choose L1.
ONE TIME PROGRAM
• Enter the information while the
space is flashing.
PROGRAM NUMBER
1
DATE
0 5 / 0 4 TUE
START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
• To stop a started timer recording,
press STOP/EJECT CA on the front
of the DVD/VCR. (You cannot stop a
started timer recording with the
STOP C button on the remote.)
More Helpful Hints are on
page 76.
CHANNEL
16
REC SPEED – –
Instructions continue on page 38.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 38
38 Timer Recording (cont’d)
STANDBY-ON
Press o or p to select a recording tape speed.
TIMER SET
The arrow will appear beside your choice.The select-
SETUP
REC
AUDIO SUBTITLE ANGLE
9
11
10
ed speed will flash beside REC SPEED. Details about
tape speed are on page 72.
REPEAT
REPEAT
A-B
C-RESET
CLEAR
ONE TIME PROGRAM
PREV/
CH
NEXT/
CH
PROGRAM NUMBER
1
TITLE
MODE
RETURN
DATE
0 5 / 0 4 TUE
START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
DISPLAY
VCR
DVD
CHANNEL
1 6
DISC
REC SPEED S P
B SP
MENU
OK
SLP
9
STOP
PLAY
Press C-RESET/CLEAR to store the timer record-
ing.
10
11
SEARCH
REW
SEARCH
FF
PAUSE
PressTIMER SET. The DVD/VCR will turn off and
will appear on the display panel. In some cases, the
DVD/VCR will switch to DVD mode instead.You may
use the DVD Player during a timer recording.
NA508
SPEED
1
2
3
6
9
SLOW
4
7
5
8
0
If you want to use theVCR until time for the record-
ing, don’t press TIMER SET until a few minutes before
the recording should start. Or, press TIMER SET only
when you know you won’t be using theVCR anymore
ZOOM SEARCH MODE
+10
(until after the recording).When
is in the display
panel, you cannot put the DVD/VCR inVCR mode by
pressingVCR or SOURCE.You must first press TIMER
SET to cancel the timer recording temporarily.Then,
you can use theVCR features again.
CancellingTimer Recordings
PressVCR, then press DISC/MENU so MENU
appears.
1
Press o or p to select TIMER PROGRAMMING,
then press B.
Helpful Hints
2
• To change incorrect information,
press s or B to choose the item
you want to change. Press o or
p to adjust the information.
Press o or p to find the program you want to
cancel.
3
While the program number is flashing, press
to clear all the information for that program.
s
• If a timer recording is set and
appears, pressing STOP/EJECT
C A (VCR) will turn on the
4
ONE TIME PROGRAM
DVD/VCR and/or cancel the timer
PROGRAM NUMBER
1
DATE
05/04
07:30
08:30
16
TUE
PM
PM
recording.The
will disappear.
START TIME
END TIME
CHANNEL
REC SPEED
Press STOP/EJECT C A (VCR)
again to remove the tape. Insert a
tape and pressTIMER SET to
reset the timer recording.
SP
• If there is no tape in theVCR
when you pressTIMER SET,
will flash. Insert a tape.
Press C-RESET/CLEAR to remove the menu.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 39
DVD to Videotape Duplication 39
Follow the steps below to copy a DVD to a videotape. This
will be possible only if the DVD is not copy protected.
Before you begin:
STANDBY-ON
TIMER SET
● Put a videotape in the cassette compartment. Make sure the
tape’s record tab is intact and the tape is long enough
to record the DVD.
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
3,5
5,6
● Put the DVD you want to copy in the disc tray.
● PressVCR so theVCR light appears on the front of the
DVD/VCR.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
● Turn on the TV and set it to channel 3, 4, or itsVideo Input.
DISPLAY
VCR
DVD
4
DISC
Point the remote control at the DVD/VCR. Press
MENU
OK
Number buttons 0, 0, 3. “DISC” will appear on
1
the TV screen.
STOP
PLAY
DISC
6
1
SEARCH
REW
SEARCH
FF
PAUSE
5
2
NA508
SPEED
1
2
3
6
9
SLOW
4
7
5
8
0
Press SPEED until the desired tape speed (SP or
ZOOM SEARCH MODE
+10
SLP) appears briefly on theTV. Details about tape
2
speed are on page 72.
Press REC
I
to start recording. REC will appear on
the display panel.
3
4
5
Press DVD. Press PLAY
B
to play the disc.
To pause the recording, pressVCR, then press
PAUSE
k
once. REC will flash. To resume recording,
or press PAUSE again. REC will
press REC
I
k
reappear.
To stop recording, pressVCR, then press STOP
C.
6
Helpful Hints
• A timer recording is not possible
during DVD to videotape
duplication.
• You cannot copy a DVD to a
videotape if you are using
Progressive Scan. Details are on
page 12.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 40
40 Repeat Play
Follow the steps below to play a videotape repeatedly.
STANDBY-ON
TIMER SET
PressVCR, then press DISC/MENU so MENU
appears.
SETUP
REC
AUDIO SUBTITLE ANGLE
1
REPEAT
REPEAT
A-B
- M E N U -
B TIMER PROGRAMMING
C-RESET
CLEAR
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
LANGUAGE SELECT
AUDIO OUT
TV STEREO
DISPLAY
[ON]
VCR
DVD
SAP
DISC
1
2-3
MENU
OK
Press o or p to select AUTO REPEAT.
STOP
PLAY
2
3
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
LANGUAGE SELECT
AUDIO OUT
TV STEREO
1
2
3
6
9
[ON]
SLOW
SAP
4
7
5
8
0
ZOOM SEARCH MODE
Press B so ON appears next to AUTO REPEAT.
Tape playback will begin immediately.AUTO REPEAT
will appear on the TV screen briefly.
(If you are fast forwarding or rewinding the tape, press
C-RESET/CLEAR to remove the menu, then press PLAY
B to begin tape playback.)
+10
B
The tape will play to the end, rewind, then play again.
(TV programming will appear on the screen while the
tape is rewinding.)
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[ON]
[ON]
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
Helpful Hint
• To cancel AUTO REPEAT, follow
steps 1-2. At step 3, press B so
OFF appears beside AUTO
REPEAT. Press C-RESET/CLEAR.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 41
Tape Counter 41
Follow the steps below to reset theVCR’s real-time tape
counter to zero at a tape location you want to refer to later.
STANDBY-ON
TIMER SET
PressVCR, then play, fast forward, or rewind a
SETUP
REC
AUDIO SUBTITLE ANGLE
tape to the location that you would like to refer
1
2
REPEAT
REPEAT
A-B
to later. Press STOP C to stop the tape.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
Press DISPLAY to see the status display.
3
4
TITLE
MODE
RETURN
STOP
DISPLAY
2
VCR
DVD
DISC
MENU
OK
SLP
1 : 23 : 45 HIFI
STOP
PLAY
1
SEARCH
REW
SEARCH
FF
While the counter is on the screen, press
C-RESET/CLEAR to reset the counter to zero.
PAUSE
NA508
SPEED
3
4
1
2
3
6
9
SLOW
STOP
4
7
5
8
0
ZOOM SEARCH MODE
+10
SLP
0 : 00 : 00 HIFI
When you later want to return to this point on
the tape, press DISPLAY so you can see the
counter (while tape play is stopped). Press
SEARCH/FF g or SEARCH/REWh.
As the tape rewinds or forwards, watch the counter.
When it reaches zero, press PLAY B to play the
tape.
Helpful Hints
• You may only set the counter to
zero at one location at a time.
Setting the counter to zero at a
second location will erase the pre-
vious zero setting.
• If you remove the tape, the
counter will reset to zero at the
point at which you last stopped
play whenever you reinsert the
tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 42
42 Time Search, Index Search
Time Search
TITLE
MODE
RETURN
Follow the steps below to search forward or backward on a
tape a specific length of time.There must be a tape in the
cassette compartment.
DISPLAY
VCR
DVD
DISC
1
MENU
OK
PressVCR, then press SEARCH MODE until the
TIME SEARCH screen appears.
1
STOP
PLAY
TIME SEARCH
- : - -
2-3
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
1
2
5
8
0
3
6
9
SLOW
4
7
Within 30 seconds, press o or p until your desired
length of time appears. Or, press and hold o or
p
2
3
until you reach the desired length of time.
ZOOM
SEARCH MODE
+10
You can set aTime Search for up to 9 hours and 59 min-
utes (9:59).
1
Within 30 seconds, press s (for a reverse search) or
B (for a forward search). The tape begins rewinding or
forwarding.When it rewinds or forwards the time you
specified, play will begin.The time will count down beneath
TIME SEARCH during the search.
If the end of the tape is reached during the search, the
search will stop and the tape may rewind. Details are on
page 44.
TITLE
MODE
RETURN
Index Search
An Index Mark is made automatically at the beginning of each
recording. Essentially, an Index Mark is a “bookmark.” Find the
start of a recording by following these steps.
DISPLAY
VCR
DVD
1
2-3
DISC
MENU
OK
PressVCR, then press SEARCH MODE until the
INDEX SEARCH screen appears.
1
STOP
PLAY
INDEX SEARCH
_ _
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
1
2
5
8
0
3
6
9
SLOW
4
7
Within 30 seconds, press o or p until the number of
programs you want to skip appears beneath INDEX
2
3
ZOOM SEARCH MODE
SEARCH. Include the current program in your number.
+10
1
Within 30 seconds, press s (for a reverse search) or
B (for a forward search). When the tape finishes rewind-
ing or forwarding, play will start.The program numbers
will count down beneath INDEX SEARCH during the
search.
Helpful Hints
If the end of the tape is reached during the search, the
search will stop and the tape may rewind. Details are on
page 44.
• Time Search and Index Search are
not available during recording.
• To remove a Search display, press
C-RESET/CLEAR.
Recordings should be at least one minute long in SP
speed, two minutes in LP, and three minutes in SLP.
Otherwise, the Index Mark will not be available. Details on
tape recording speeds are on page 72.
• To cancel a search, press STOP C .
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 43
Special Effects Playback 43
● Before you begin, pressVCR so theVCR light appears on the
front of the DVD/VCR.
Forward and Reverse Searching (SP/LP/SLP)
During tape play, press and release SEARCH/FF
or SEARCH/REW h. A fast forward or reverse pic-
ture search will begin.
g
1
2
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
To return to play, press PLAY B.
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
Super High Speed Searching (LP/SLP)
DISPLAY
VCR
DVD
DISC
During tape play, press SEARCH/FF g or
MENU
OK
SEARCH/REW h, then press again. The search
1
speed will increase. Repeatedly pressing SEARCH/FF
or SEARCH/REWh will switch between regular and high
speed searching.
g
STOP
PLAY
To return to normal play, press PLAY B.
SEARCH
REW
SEARCH
FF
PAUSE
2
NA508
SPEED
1
2
3
6
9
SLOW
4
7
5
8
0
Viewing a Still Picture
ZOOM SEARCH MODE
During tape play, press PAUSE k. A still picture will
appear on the screen.
+10
1
To advance the still picture one frame at a time,
press PAUSE k repeatedly.
2
To release the still picture and return to play, press
PLAY B.
3
Viewing a Slow Motion Picture
During tape play, press SLOW. The tape will play in
Helpful Hints
slow motion.
1
• Slow and Still will switch to Stop
after five minutes to protect the
DVD/VCR and the tape from dam-
age.
To return to normal play, press PLAY B.
2
• SP/LP/SLP means this feature will
work with tapes recorded in
Standard Play, Long Play, or Super
Long Play. LP/SLP means this fea-
ture will work with tapes recorded
in Long Play or Super Long Play.
Tape speed details are on
page 72.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 44
44 Automatic Operation Features
The following tape features are available inVCR mode. PressVCR
so theVCR light appears on the front of the DVD/VCR.
Automatic Playback
When you put a tape in the DVD/VCR, the power will come on. If
the tape’s record tab is missing, playback will begin.
If a timer recording is set and
power will not come on automatically when you insert a tape with
the record tab intact. If a timer recording is set and is flashing
is flashing in the display panel, the
in the display panel, the DVD/VCR will eject the tape if the record
tab is missing.
Automatic Rewind, Eject
When a tape is played, fast forwarded, or recorded to its end, the
tape will rewind to the beginning, stop, and eject itself.
This feature does not operate if AUTO REPEAT is ON. Details are
on page 40.
Tape Eject
A tape can be ejected with the DVD/VCR power on or off (but
the DVD/VCR must be plugged in).
If a timer recording is set and
appears in the display panel,
pressing STOP/EJECT C A will turn on the DVD/VCR and/or can-
cel the timer recording.The
will turn off. Press STOP/EJECT
C A again to remove the tape. Remember to insert a tape and
press TIMER SET to reset the timer recording.
AutomaticTracking Adjustment
TheVCR adjusts tracking automatically to give you the best possi-
ble picture quality.With some recordings, however, you may get a
better picture using manual tracking.
ManualTracking
To manually adjust the tracking during normal and slow motion
playback of a videotape, press NEXT ∑/CH o or PREVw/CH
p
on the remote.
Tracking will return to Automatic Tracking when you press STOP
C or insert a tape.
You also can press NEXT ∑/CH o or PREVw/CH p to remove
vertical jitter in a Still picture.
Before
After
Tracking
Adjustment
Tracking
Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 45
Multi-ChannelTelevision Sound 45
Your DVD/VCR can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound
from the left and right audio channels.Your DVD/VCR also can play tapes recorded in a second audio (usu-
ally, that means your program is recorded in a second language). Of course, your DVD/VCR will play tapes
recorded in monaural (single-channel) sound as well.
Your DVD/VCR also will record on a video cassette in Hi-Fi stereo or in second audio, so when you play
that tape on the DVD/VCR, it will be in stereo or second audio.
Read the directions on this page to familiarize yourself with the stereo and second audio setups.Then fol-
low the directions on page 46 to record in stereo or second audio, or follow the directions on page 47 to
play tapes recorded in Hi-Fi stereo.
Understanding Displays
When you watch TV channels through the DVD/VCR, portions of the display shown below will appear
when you press DISPLAY twice.
If SAP or STEREO appears, the program is available in second audio or stereo.
STOP
SLP
5:40 PM
CH 02
STEREO
SAP
Even though a program is available in second audio or stereo, you must pro-
gram the DVD/VCR to receive or record the program. Follow the directions on
page 46.
This display is not available during tape playback.
To play programs in stereo, connect the DVD/VCR to a Stereo or TV as described on pages 11 and 14.You
will use the red and white DVD/VCR AUDIO OUT jacks.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 46
46 Multi-ChannelTelevision Sound (cont’d)
To set the DVD/VCR to receive programs in stereo or second
audio, follow these steps.
STANDBY-ON
TIMER SET
PressVCR, then press DISC/MENU so MENU
SETUP
REC
AUDIO SUBTITLE ANGLE
appears.
REPEAT
REPEAT
A-B
1
- M E N U -
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
B TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
TITLE
MODE
RETURN
DISPLAY
LANGUAGE SELECT
AUDIO OUT
TV STEREO
VCR
DVD
1,3
2
[ON]
DISC
SAP
MENU
OK
Press o or p to selectTV STEREO or SAP
(Second Audio Program). Press B so ON appears
beside your selection.
STOP
PLAY
2
3
SEARCH
REW
SEARCH
FF
PAUSE
NA508
- M E N U -
SPEED
1
2
3
6
9
TIMER PROGRAMMING
SLOW
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
4
7
5
8
0
LANGUAGE SELECT
AUDIO OUT
B TV STEREO
SAP
[ON]
ZOOM SEARCH MODE
+10
Press DISC/MENU to remove the menu.
Helpful Hints
• You can only receive and record in
stereo or second audio programs
that are broadcast as such.You
can only play tapes in stereo or
second audio if they were recorded
that way. Please see page 45 to
determine if the program is in
stereo or second audio.
• If SAP is ON but the program is
not broadcast in Second Audio, you
will hear and record the program
in normal audio.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_1.qx4 04.4.14 4:47 PM Page 47
Hi-Fi Stereo 47
Multi-Channel Television Sound system broadcasts are
recorded in Hi-Fi stereo.To play in Hi-Fi stereo the tapes
recorded in Hi-Fi stereo, follow these steps.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
PressVCR, then press DISC/MENU so MENU
appears.
REPEAT
REPEAT
A-B
1
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
- M E N U -
TITLE
MODE
RETURN
1
1,4
2-3
B TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
DISPLAY
VCR
DVD
LANGUAGE SELECT
AUDIO OUT
TV STEREO
DISC
[ON]
MENU
OK
SAP
STOP
PLAY
Press o or p to select AUDIO OUT.
Then, press B.
SEARCH
REW
SEARCH
FF
2
3
4
PAUSE
- M E N U -
NA508
SPEED
TIMER PROGRAMMING
1
2
3
6
9
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
[OFF]
SLOW
4
7
5
8
0
LANGUAGE SELECT
B AUDIO OUT
TV STEREO
[ON]
ZOOM SEARCH MODE
SAP
+10
Press o or p to select HIFI. ON will appear
beside HIFI.
AUDIO OUT
B HIFI
MONO
[ON]
Helpful Hints
• Programs are recorded in both Hi-
Fi stereo sound and in monaural
sound.
• The audio level of a tape recorded
in Hi-Fi stereo will differ from the
audio level of a tape not recorded
in Hi-Fi stereo.
Press DISC/MENU to remove the menu.
• You can change to MONO if you
want monaural audio playback.
Follow steps 1-2, then press o or
p to select MONO at step 3.
Press DISC/MENU. HIFI will disap-
pear from the status display.
• If you play non-Hi-Fi tapes while
AUDIO OUT is set to HIFI, HIFI will
not appear on the status display.
The tape will play in monaural
sound.
Please see additional notes on
page 77.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 48
48 DVD Disc Menus
DVDs contain menus that describe the contents of the DVD or
allow you to customize DVD playback. For example, the menu may
offer choices for subtitle languages, special features, or scene selec-
tion.To use the DVD Disc menu and select playback features, fol-
low these steps.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
Press DVD to put the DVD/VCR in DVD mode.The DVD
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
light will appear on the front of the DVD/VCR.
1
2
3
TITLE
MODE
RETURN
DISPLAY
Press DISC/MENU. The DVD’s main Disc menu will
appear.
1
3
VCR
DVD
DISC
MENU
OK
2
2
Press o, p, s, or B to select an item, then press
STOP
PLAY
OK. Continue this process to set up all the features you
want.
Using theTitle Menu
Some DVDs have a Title Menu, which lists the Titles available on
the DVD. Use the Title Menu to play a specific Title.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
REPEAT
REPEAT
A-B
1
2
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
PressTITLE. The Title menu will appear.
TITLE
MODE
RETURN
If a Title menu is not available, the “X” may appear on the
DISPLAY
TV screen. Or, if the DVD only has a main Disc menu as
VCR
DVD
1
3
described above, it may appear when you press TITLE.
DISC
MENU
OK
Press o, p, s, or B to select aTitle, then press OK.
Playback will begin at the Title you selected.
3
STOP
PLAY
Helpful Hints
• Menus vary among DVDs. Follow
the information accompanying the
DVD.
• Not all DVDs have Disc orTitle
menus.
• Some DVDs may refer to Chapters
as “scenes.” Some DVDs may refer
to theTitle Menu as the “scene
index.”
• TheTITLE button will not be active
with all DVDs.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 49
Fast Forward/Reverse Search 49
STANDBY-ON
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
TIMER SET
1
2
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
During play, press SEARCH/FF g or SEARCH/
REW h. Use SEARCH/FF g for a forward search.
Press SEARCH/REW h for a reverse search.
● During DVD play, pressing SEARCH/FF g or SEARCH/
REW h will forward or reverse the picture at approxi-
mately two, eight, 50, or 100 times the normal speed.The
speed may vary depending on the Disc.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
DISPLAY
VCR
DVD
1
3
DISC
MENU
OK
An g 1, g 2, g 3, or g 4 will indicate fast for-
ward searching. Sound will be mute during searching.
Or, h 1, h 2, h 3, or h 4 will appear briefly
on the TV screen to indicate fast reverse searching.
● For Audio CDs, the approximate searching speed is 16
times the normal play speed.An g or h will appear
briefly on the TV screen. Sound will be intermittent dur-
ing searching on an Audio CD.
● DuringVideo CD play, pressing SEARCH/FF g or
SEARCH/REW h will forward or reverse the picture
at approximately two, eight, or 30 times the normal
speed.The speed may vary depending on the Disc.
An g 1, g 2, or g 3 will indicate fast forward
searching.
STOP
PLAY
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
2
1
2
3
6
9
SLOW
4
7
5
8
0
ZOOM SEARCH MODE
+10
Or, h 1, h 2, or h3 will appear briefly on the TV
screen to indicate fast reverse searching.
● For MP3, the approximate searching speed is eight times
the normal speed.An g or h will appear briefly on
the TV.
E
1
Example: Playing a DVD in
reverse at twice the normal
playing speed.
Press PLAY B to return to normal play.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 50
50 Title/Chapter Playback, SpecificTime Playback
TITLE
MODE
RETURN
Title/Chapter Playback
DISPLAY
VCR
DVD
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
DISC
1
MENU
OK
1
2
During DVD play, press SEARCH MODE until CH
STOP
PLAY
(for Chapter) or TT (for Title) appears on the TV screen.
The number of available Titles or Chapters will appear at
the right ( /4, for example).
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
Enter theTitle or Chapter number using the
1
2
5
8
0
3
6
9
Number buttons. The Title or Chapter will play.
SLOW
3
● To select a single-digit Track when there are more than
4
10 tracks, press OK to play the Track.
7
3
● If you enter aTrack number that is not available on the Disc,
ZOOM SEARCH MODE
play will not begin (or the currentTrack will continue to play).
+10
2
1
12/17
4 / 4
SpecificTime Playback
TITLE
MODE
RETURN
DISPLAY
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
VCR
DVD
DISC
1
2
MENU
OK
During DVD,Audio CD, orVideo CD (without PBC)
play, press SEARCH MODE until the Time Search dis-
play appears.
STOP
PLAY
SEARCH
REW
SEARCH
FF
TOTAL 1:29:00
PAUSE
NA508
SPEED
1
2
3
6
9
SLOW
4
7
5
8
0
3
ZOOM SEARCH MODE
Within 30 seconds, use the Number buttons to
enter the elapsed playing time (of theTrack or
Title) at which you want play to begin. Enter the time
in hours, minutes, and seconds.Within a few seconds, play
will start at the specified time.
● Example: 1 hour, 23 minutes, and 30 seconds
1 → 2 → 3 → 3 → 0
+10
2
3
Helpful Hints
• When play is stopped, use the
● Make sure the time you enter is within the total time of
the current Title or Track. If it is not, the time space will
clear and play will continue at its current point.The total
time available in the current Track or Title will appear in
the Time Search display.
● If you make a mistake entering the time, press C-
RESET/CLEAR to clear the time area. Enter the correct
information.
Number buttons to select aTitle
for immediate play.
During play, use the Number but-
tons to choose a Chapter for
immediate play.
• Title/Chapter playback is not avail-
able with some DVDs.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 51
Track Playback 51
There are three ways to play an Audio CD,Video CD (without PBC),
MP3, or JPEGTrack: Use the Number buttons, the SEARCH MODE
button, or NEXT ∑/CH o or PREV w/CH p.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
● Before you begin, press DVD so the DVD light appears on the
front of the DVD/VCR.
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
A
TITLE
MODE
RETURN
Using the Number Buttons
Press the Number buttons to enter aTrack number. Playback
will start at the selected Track.
C
DISPLAY
VCR
DVD
DISC
MENU
For Tracks 10 and above, press the +10 button so the Search display
(TR _ _ / 12 - an example of total tracks) appears on the TV. Press the
Number button of the first digit, then press the Number button of the
second digit. For example, to play Track 26, press +10, then Number 2,
then Number 6.
OK
STOP
PLAY
For single-digit Tracks (1-9), press a single Number button.
If you enter aTrack number that is not available on the Disc, play will
not begin (or the currentTrack will continue to play).
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
1
2
3
6
9
SLOW
4
7
5
8
0
B
A,B
ZOOM SEARCH MODE
Using SEARCH MODE
+10
Press SEARCH MODE so theTrack Search display (TR)
appears.Within 30 seconds, press the Number buttons to
B
select theTrack number. Play will begin at thatTrack. For a single-
digitTrack (1-9), enter a zero first. For example, to playTrack 5, press
0, 5.You do not have to use the +10 button in Search Mode.
C
o
During play, press NEXT ∑/CH
w
p
to skip the current
Using NEXT ∑/CH or PREV /CH
o
Track and move to the nextTrack. The Track number will
appear briefly on the DVD/VCR display panel.
During play, press PREV /CH
ning of the currentTrack or press repeatedly to go to pre-
viousTracks. The Track number will appear briefly on the
DVD/VCR display panel.
w
p
to return to the begin-
Helpful Hint
• You cannot use NEXT ∑/C H
o
to
go from the lastTrack on the Disc
to the firstTrack.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 52
52 Paused and Step-by-Step Playback, Resume
Paused and Step-by-Step Playback
STANDBY-ON
Press DVD to put the DVD/VCR in DVD mode.The DVD
TIMER SET
light will appear on the front of the DVD/VCR.
1
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
Press PAUSE k during playback. Play will pause and
the sound will be mute.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
2
3
TITLE
MODE
RETURN
DISPLAY
Press PAUSE k repeatedly to see a DVD orVideo
CD picture advance one frame (or step) at a time.
The sound will remain mute.
Pressing PAUSE k repeatedly during Audio CD, MP3, or
JPEG play will have no effect.
VCR
DVD
DISC
1
4
MENU
OK
STOP
PLAY
Press PLAY B to resume play.
SEARCH
REW
SEARCH
FF
4
PAUSE
NA508
SPEED
2-3
2
1
2
3
6
9
SLOW
4
7
5
8
Resume
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
STANDBY-ON
TIMER SET
1
2
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
Press STOP C during play. In a few seconds, the follow-
ing Resume message will appear on the TV screen.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
DISPLAY
VCR
DVD
1
3
DISC
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
MENU
OK
STOP
PLAY
Press PLAY B. In a few seconds, play will resume from
the point at which it stopped last.You can resume playing at
the same point even if you turn off the DVD/VCR, then
turn it on again later. However, opening the disc tray will
cancel the Resume feature. Play will start at the beginning
the next time you insert the Disc.
SEARCH
REW
SEARCH
FF
PAUSE
3
For MP3, play will resume from the beginning of the cur-
rent track.
To cancel Resume and start playing the Disc from the begin-
ning, press STOP C a second time while play is stopped.The
Stop symbol (C) will appear briefly on theTV screen. Press
PLAY B to start playing the Disc from the beginning.
Helpful Hint
• Set STILL MODE to FIELD in the
DISPLAY menu if still pictures are
blurry. Details are on pages 64-65.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 53
Repeat,A-B Repeat 53
Repeat
STANDBY-ON
TIMER SET
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
1
2
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
During play, press REPEAT until the repeat mode you
want appears on the TV.
C-RESET
CLEAR
2
1
PREV/
CH
NEXT/
CH
On a DVD, select CHAPTER,TITLE, or OFF. On an Audio
CD orVideo CD (without PBC), select TRACK,ALL (all
Tracks on the Disc), or OFF.With MP3 or JPEG files, select
TRACK, GROUP (all Tracks in the current folder),ALL, or
OFF.
Selecting a new Track, Chapter, or Title will cancel repeat
play.
TITLE
MODE
RETURN
DISPLAY
VCR
DVD
DISC
MENU
OK
STOP
PLAY
Example: Repeat a
DVD Chapter
Example: Repeat an
Audio CD or
Video CDTrack
A-B Repeat
Follow these steps to play a section of a DVD,Audio CD, orVideo
CD repeatedly.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
REPEAT
REPEAT
A-B
1
2
3
C-RESET
CLEAR
3-5
1
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
Press PLAY B to play the Disc to the point at
DISPLAY
which you want repeated playback to begin.
VCR
DVD
DISC
MENU
OK
Press A-B REPEAT to set the starting point (A).
A - will appear on the TV screen.
STOP
PLAY
Play or fast forward the Disc to the point at which
you want repeated play to end, then press A-B
2
SEARCH
REW
SEARCH
FF
PAUSE
4
REPEAT again.
A-B will appear on the TV. The sec-
tion will begin to play repeatedly.
Helpful Hints
To cancel A-B Repeat, press A-B REPEAT.
appear on the TV screen. Regular play will resume.
OFF will
• Repeat play and A-B Repeat are
not available with all Discs.
5
• The entire A-B Repeat section must
be within a singleTitle orTrack. If
you do not enter Point B before the
end of theTrack orTitle is reached,
the end of theTrack orTitle will
become Point B automatically.
• Point B must be later on the Disc
than Point A.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 54
54 Markers
Use Markers to remember your favorite places on a DVD,Audio
CD, orVideo CD (without PBC).To set the Markers, follow these
steps.
STANDBY-ON
TIMER SET
● Before you begin, place the DVD/VCR in DVD mode. Press
DVD so the DVD light appears on the front of the DVD/VCR.
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
Play the Disc to within 30 seconds of the point at which
TITLE
MODE
RETURN
you want to set the Marker. Press SEARCH MODE. The
1
markers will appear at the top of the TV screen.
DISPLAY
VCR
DVD
DISC
MENU
OK
2-4
1,4
STOP
PLAY
Example: DVD
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
Within 30 seconds, press s or B to select a Marker
1
2
3
6
9
SLOW
(1-10). Make sure _ _ : _ _ : _ _ appears beneath the num-
2
3
4
7
5
8
0
ber.
Play the Disc to the point at which you want to set
ZOOM SEARCH MODE
+10
the Marker (up to 30 seconds away).
When the Disc reaches the point you want to
remember, press OK. TheTitle orTrack number and its
elapsed playing time will appear beneath the markers.
Example: DVD
Example:Audio CD
andVideo CD
To return to a Marker
during play, press SEARCH MODE until you see
the Markers.
Press s or B to choose the Marker you want, then
press OK. Disc play will continue from the marked point.
Helpful Hints
4
• Opening the disc tray or turning
off the DVD/VCR will erase all the
Markers.
• To erase a single Marker, press
SEARCH MODE until you see the
Markers. Press s or B to select
a Marker. Press C-RESET/CLEAR.
Press RETURN or SEARCH MODE
to remove the display.
• To erase all the Markers, press
SEARCH MODE until you see the
Markers. Press B to select AC,
then press OK. Press SEARCH
MODE or RETURN to remove the
display.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 55
Subtitles, Camera Angles 55
Subtitles
You can select a language for DVD subtitles during playback.You
can select only languages that are available on the DVD.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
REPEAT
REPEAT
A-B
1
2
2
1
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
During play, press SUBTITLE repeatedly to select a
TITLE
MODE
RETURN
subtitle language. The number of available languages
DISPLAY
appears at the right of the subtitle display. In the example
below, six languages are available ( /6).After a few seconds,
the subtitles will appear.
Or, press SUBTITLE repeatedly to turn off subtitles.
When no subtitles are available,“NOT AVAILABLE”
appears at the right of the subtitle display.
VCR
DVD
DISC
MENU
OK
STOP
PLAY
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
Camera Angles
REPEAT
REPEAT
A-B
2
1
Some DVDs contain scenes recorded from different angles or per-
spectives.The camera angle will not change if the DVD does not
contain sequences recorded from different perspectives.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
Press DVD to put the DVD/VCR in DVD mode.The DVD
DISPLAY
VCR
DVD
light will appear on the front of the DVD/VCR.
1
2
DISC
MENU
OK
During play, press ANGLE repeatedly to select a dif-
ferent angle. The number of available angles appears at
STOP
PLAY
the right of the Angle display. In this example, eight angles
are available ( /8).
Helpful Hints
• On some DVDs, you must select a
subtitle language in the Disc menu.
• If the language does not appear
after pressing SUBTITLE several
times, the Disc does not have subti-
tles in that language.
• Opening the disc tray will cancel
your subtitle setting.
• If the current portion of the Disc
has multiple camera angles,
will
appear on theTV screen. ANGLE
ICON must be ON. Details are on
pages 64-65.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 56
56 Parental Controls Password
Parental Controls prevents viewing of DVDs that exceed your rating
limits.This feature will not limit viewing if the DVD is not rated or
coded. Check your DVDs and settings before letting children access
the DVD/VCR. Follow these steps to change your password.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
Press DVD to put the DVD/VCR in DVD mode.The DVD
REPEAT
REPEAT
A-B
2,7
light will appear on the front of the DVD/VCR. Press STOP
1
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
C to stop Disc playback.
TITLE
MODE
RETURN
Press SETUP.
DISPLAY
2
VCR
DVD
DISC
QUICK SETUP
1
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
ON
MENU
OK
OK
STOP
PLAY
Press s or B to select CUSTOM, then press OK.
3-5
4,6
3
4
SEARCH
REW
SEARCH
FF
LANGUAGE
PAUSE
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
SUBTITLE
DISC MENU
PLAYER MENU
NA508
SPEED
OK
1
2
3
6
9
SLOW
4
7
5
8
0
Press s or B to select
(the lock), then press OK.
The first time you set a password, this menu will appear.
ZOOM SEARCH MODE
+10
PASSWORD
Press the Number buttons to enter a four-digit pass-
word. The password will appear on the screen.Write it
down so you don’t forget it.
Press OK.You are finished! Go to step 7.
If you have set a password before, this menu will appear.
Press the Number buttons to enter your current
four-digit password. Asterisks (*) will appear instead of
your password.This protects its identity.
Helpful Hints
• The default password is 4737. If
you forget your password, press
Press o or p to select CHANGE, then press OK.
5
PARENTAL
Number buttons 4, 7, 3, 7 at step
4.You will be prompted to enter a
new four-digit password. Use the
Number buttons to enter a new
four-digit password, then press OK.
PARENTAL LEVEL will reset to ALL.
See page 57 to reset PARENTAL
LEVEL as you desire.
PARENTAL LEVEL ALL
CHANGE
OK
Press the Number buttons to enter a four-digit pass-
word. The password numbers will appear on the screen.
6 Write down the password so you will not forget it. Press
7
OK. The previous menu will reappear.
• A power failure will not erase your
password.
Press SETUP to remove the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 57
Parental Levels 57
Follow these steps to set the rating level for your DVDs. DVDs
whose ratings exceed the level you set will not play.
STANDBY-ON
TIMER SET
Press DVD to put the DVD/VCR in DVD mode.The DVD
SETUP
REC
AUDIO SUBTITLE ANGLE
light will appear on the front of the DVD/VCR. Press STOP
2,8
1
REPEAT
REPEAT
A-B
C to stop Disc play.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
Press SETUP.
TITLE
MODE
RETURN
2
DISPLAY
QUICK SETUP
VCR
DVD
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
ON
DISC
1
OK
MENU
OK
3-4
6-7
Press s or B to select CUSTOM, then press OK.
STOP
PLAY
3
4
LANGUAGE
SEARCH
REW
SEARCH
FF
PAUSE
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
SUBTITLE
DISC MENU
PLAYER MENU
NA508
SPEED
OK
1
2
3
6
9
SLOW
4
7
5
8
0
Press s or B to select
(the lock), then press OK.
5
ZOOM SEARCH MODE
+10
RATING
EXPLANATIONS
Press the Number buttons to enter your four-digit
password.
• ALL - Parental
• 4 - PG13 -
Controls is
inactive; all discs
can play.
Unsuitable for
children under
5
6
13
• 3 - PG - Parental
Guidance
Press o or p to select PARENTAL LEVEL, then
press OK.
• 8 - Adult material
• 7 - NC-
1
7 - Not
suggested.
appropriate for
children under
•
1- G - General
1
7
Audience;
recommended for
all ages.
• 6 - R - Restricted;
parental approval
required for view-
PARENTAL
PARENTAL LEVEL ALL
CHANGE
OK
ers under 18.
Press o or p to select a level, then press OK. The
rating levels continue on two menu screens. Press o or
repeatedly to move to the next or previous screen to find
the rating level you want.
p
7
Helpful Hints
• When you try to play a DVD whose
rating exceeds the level you set, an
on-screen message will indicate the
DVD cannot play. Remove the DVD,
then set PARENTAL LEVEL to ALL.
Reload the DVD and begin play.
Some DVDs may let you enter your
four-digit password to begin play.
Follow the on-screen messages as
prompted.
After making your selection, the previous menu will appear.
The level you selected will appear beside PARENTAL
LEVEL.
PARENTAL
PARENTAL LEVEL
ALL
8
7
6
5
4
3
[NC-17]
[R]
OK
[PG13]
[PG]
Press SETUP to remove the menu.
• You cannot use the default password
(4737) to play a DVD.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 58
58 Audio Language, Stereo Sound Mode
Audio Language
You can select a language for DVDs during playback if multiple lan-
guages are available.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
REPEAT
REPEAT
A-B
2
1
1
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
During DVD play, press AUDIO repeatedly to
TITLE
MODE
RETURN
choose one of the available languages. The new audio
2
will be heard.The display will disappear after about five sec-
onds.
The Audio display may show if the DVD has Dolby Digital
or multi-channel (5.1 CH) sound or its sampling rate (48 k,
for example).The number of available languages appears
after the “ / ” at the right of the display ( /3, for example).
DISPLAY
VCR
DVD
DISC
1
MENU
OK
STOP
PLAY
1.ENG Dolby D 3/2.1ch 48k/3
Example: English audio
Stereo Sound Mode
STANDBY-ON
Adjust Stereo Sound to determine whether you will hear the
left channel, the right channel, or both channels (stereo) dur-
ing Audio CD orVideo CD playback.
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
If you connected the DVD/VCR to a Stereo using the
COAXIAL DIGITAL AUDIO OUT jack as described on page
15, or if you connected to a TV with only the RF coaxial
cable, you cannot adjust Stereo Sound Mode.
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
DISPLAY
Press AUDIO repeatedly during Audio CD or
VCR
DVD
DISC
Video CD play to choose STEREO, L-CH, or R-
1
MENU
OK
CH.
STEREO
Both right and left channels
are heard (stereo).
STOP
PLAY
L-CH
Only the left channel is heard.
Helpful Hints
• If a language is not available after
pressing AUDIO several times, the
DVD does not have that language.
• Some DVDs only let you change
the language in the Disc menu.
• Audio languages may be abbrevi-
ated (such as ENG for English).
Or, three dashes (- - -) may
R-CH
Only the right channel is heard.
appear instead of an abbreviation.
• You cannot adjust the Stereo
Sound Mode whenVirtual
Surround is active. Details are on
page 70.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 59
Slow Motion, Zoom 59
Slow Motion
STANDBY-ON
TIMER SET
Press PAUSE F during DVD orVideo CD play.
SETUP
REC
AUDIO SUBTITLE ANGLE
1
2
REPEAT
REPEAT
A-B
Press SEARCH/FF D or SEARCH/REW h. Slow
motion play will begin. Press SEARCH/FF D or SEARCH/
REW h repeatedly during slow motion play to play the
DVD forward or backward at 1/16, 1/8, or 1/2 the normal
speed. Reverse slow motion is not available on aVideo CD.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
DISPLAY
VCR
DVD
An
1 (1/16),
2 (1/8), or
3 (1/2) will appear
DISC
briefly on the TV screen to indicate slow forward play.
MENU
OK
An
1 (1/16),
2 (1/8), or
3 (1/2) will indicate
slow reverse play.
STOP
PLAY
3
3
2
1
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
Example: Playing a DVD forward
at half the normal speed.
1
2
3
STANDBY-ON
Press PLAY B to return to normal play.
TIMER SET
3
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
Zoom
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
You can enlarge a DVD,Video CD, or JPEG picture to two or four
times larger than normal.
TITLE
MODE
RETURN
DISPLAY
Press ZOOM during play or when play is paused.
VCR
DVD
DISC
The picture will appear twice as large. Press ZOOM again
1
MENU
OK
to make the picture four times larger than normal. Either
x2 or x4 will appear beside the zoom icon on the TV
screen.
2
STOP
PLAY
While the picture is enlarged, press o, p, s, or
B
to move the zoomed image up, down, left, or right.
The gray box with an inner blue box that shows during
Zoomed playback is the position guide.To remove it or
show it, press OK.The position of the blue box inside the
gray box indicates the position of the zoomed image within
the overall picture.
SEARCH
REW
SEARCH
FF
PAUSE
2
3
NA508
SPEED
1
2
3
6
9
SLOW
4
7
5
8
0
ZOOM SEARCH MODE
+10
1,3
Helpful Hints
• The sound will be mute during slow
motion play.
• The SLOW button on the remote
does not activate slow motion of
DVDs.
• The x4 zooming is not active with
some Discs. Only x2 zooming is
available forVideo CDs and JPEGs.
To return the picture to normal, press ZOOM.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 60
60 Programmed Playback
You may determine the order in which Audio CD, MP3, or JPEG
Tracks will play.
STANDBY-ON
TIMER SET
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
SETUP
REC
AUDIO SUBTITLE ANGLE
1
2
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
While play is stopped, press MODE.
The PROGRAM screen will appear.
TITLE
MODE
RETURN
DISPLAY
2
1
4
VCR
DVD
0
DISC
MENU
OK
3
STOP
PLAY
Example:Audio CD
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
Press o or p to select a track you want to play,
then press OK. Repeat this step until you have selected
all the Tracks you wish to play in the Program.
Press C-RESET/CLEAR to erase the last Track in the
Program if you make an error.
Additional Tracks may be on other screens. Press p or
to see all the Tracks.
To see Tracks in a Program when there are more than eight
1
2
3
6
9
SLOW
3
4
4
7
5
8
o
tracks, use NEXT ∑/CH
o
and PREV w/CH p to see all the
Tracks.
While an MP3/ JPEG folder is open, press s or B to go to
the previous or next level of Files or Folders. Press TITLE
to return to the first item in the highest level of Files or
Folders.
Helpful Hints
• You cannot use the Number but-
tons or SEARCH MODE to select
anotherTrack while playing a
Program. Use NEXT ∑/CH o or
PREV w/CH p to select other
Tracks within the Program.
• You cannot combine random
play with a Program.
Press PLAY B. The Tracks will play once in the order you
set.Turning off the DVD/VCR or opening the disc tray will
erase the Program.
• You may play a Program or a
Track within a Program repeat-
edly. During programmed play,
press REPEAT so ALL (allTracks
in the Program) orTRACK
appears.The entire Program or
the currentTrack will play over
and over.
• You cannot alter a Program dur-
ing play.
• You can start Program play only
while in the PROGRAM screen.
• A Program can have a maximum
of 99Tracks.
• To erase allTracks in the Program,
select ALL CLEAR at step 3.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 61
Random Playback 61
You may play Audio CD, JPEG, or MP3 Tracks in Random order
instead of the order in which they are recorded (1,2,3...).
STANDBY-ON
TIMER SET
Press DVD to put the DVD/VCR in DVD mode. The
DVD light will appear on the front of the DVD/VCR.
SETUP
REC
AUDIO SUBTITLE ANGLE
1
2
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
While play is stopped, press MODE twice so the RAN-
DOM screen appears.
TITLE
MODE
RETURN
DISPLAY
2
VCR
DVD
DISC
1
3
MENU
OK
STOP
PLAY
Example:Audio CD
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
While the RANDOM screen appears, press
1
2
3
6
9
PLAY B. The Tracks will play in random order.After all
SLOW
3
the Tracks play once, play will stop.
4
7
5
8
0
ZOOM SEARCH MODE
+10
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 62
62 MP3/JPEG Playback
The DVD Player will play MP3 and JPEG files that you record and
finalize on a CD-RW (Compact Disc-Rewritable) or CD-R
(Compact Disc-Recordable).
STANDBY-ON
TIMER SET
These Discs may contain pictures in a JPEG format or audio Tracks
in an MP3 format. You may copy or download MP3 music files
from certain legal Internet sites, then copy those files onto a CD-
R or CD-RW.You cannot make or record such Discs using this
DVD/VCR. See your computer manual for details on recording.
Keep these characteristics in mind when making Discs you intend
to play on the DVD Player of this DVD/VCR.
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
DISPLAY
● Record MP3 Tracks at a sampling frequency of 44.1 kHz or
48 kHz.Record in a constant bit rate between 112 kbps and 320
kbps.
● When recording JPEG Files, the size of the picture should be
between 32 x 32 and 6300 x 5100 dots.
VCR
DVD
DISC
1
3
MENU
OK
2-3
4
STOP
PLAY
Press DVD to put the DVD/VCR in DVD mode.The DVD
SEARCH
REW
SEARCH
FF
PAUSE
light will appear on the front of the DVD/VCR.
1
2
NA508
SPEED
1
2
3
6
9
SLOW
When you put a CD-RW or CD-R with MP3 or JPEG files
4
7
5
8
0
in the DVD/VCR and press MENU, the File List will appear
on the TV screen.
ZOOM SEARCH MODE
Press o or p to select a Folder, MP3Track, or JPEG
+10
File.
If you choose aTrack or File, press PLAY B or OK.
Starting with the Track or File you selected, the Tracks/Files
3
will play in the order they were recorded, i.e. 1, 2, 3,...
If you select a Folder and press OK, theTracks or
Files within that Folder will appear. Press K or L to
select theTrack or File you want, then press PLAY
B
or OK.
● Press TITLE to return to the first item in the highest
level of Files or Folders.
● Press { or B to return to previous or next levels.
● During JPEG play, press MODE to choose a transition
mode (Cut In/Out or Fade In/Out). If you chose Cut
In/Out, the images will cut in and out sharply as play pro-
gresses. If you choose Fade In/Out, then the images fade
in and out as play progresses. Press MODE again to
remove the transition modes.
Helpful Hints
• JPEG images and MP3Tracks are
known as Files. Groups of Files are
called Folders.
• Folders have the
• MP3 Files have the
• JPEG Files have the
icon.
3
icon.
icon.
● During JPEG playback, press { or B to rotate a picture
90 degrees counter-clockwise or clockwise.
• A maximum of 255 Folders can
be recognized.A maximum of 512
Files can be recognized.
To stop play, press STOP C.
• During play, press the Number but-
tons to select anotherTrack. Or, press
4
NEXT∑/CH o or PREV w/CH
p
to changeTracks.
•
If aTrack is not available,“X” will
appear on theTV. Play may resume
at an incorrectTrack or may contin-
ue with its currentTrack.
• SpecificTime playback is not pos-
sible with MP3Tracks.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 63
MP3/JPEG Displays 63
You can review MP3 and JPEG information during play.
● Before you begin, place the DVD/VCR in DVD mode. Press
DVD so the DVD light appears on the front of the DVD/VCR.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
Press DISPLAY during play. The current Track name will
show on the TV.
REPEAT
REPEAT
A-B
1
2
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
Press DISPLAY again. The current Track number, total
TITLE
MODE
RETURN
Tracks available, and elapsed playing time of the current
DISPLAY
Track will appear (for MP3 only).
VCR
DVD
DISC
MENU
1-3
OK
2/25 0:01:15
T
Current Repeat setting
TR (Track):
Current Track number
/Total Tracks
Elapsed playing time
of the current Track
STOP
PLAY
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
The following may appear to indicate Repeat play.
T: The currentTrack will play repeatedly.
G: Tracks in the current Folder will play repeatedly.
A: AllTracks will play repeatedly.
1
2
3
6
9
SLOW
4
7
5
8
0
ZOOM SEARCH MODE
+10
Press DISPLAY again to remove the display.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 64
64 Display
You can change the TV Aspect ratio, Still Mode clarity,Angle Icon
availability,Automatic Power Off, and Progressive Scan features of
the DVD Player in the Display menu.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
Press DVD to put the DVD/VCR in DVD mode.The DVD
2
REPEAT
REPEAT
A-B
light will appear on the front of the DVD/VCR.
1
2
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
When play is stopped, press SETUP.
The QUICK SETUP screen will appear.
TITLE
MODE
RETURN
DISPLAY
VCR
DVD
DISC
1
QUICK SETUP
MENU
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
ON
OK
OK
3-5
STOP
PLAY
Press { or B to select CUSTOM at the top of the
menu, then press OK.
SEARCH
REW
SEARCH
FF
PAUSE
3
NA508
SPEED
1
2
3
6
9
LANGUAGE
SLOW
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
4
7
5
8
0
SUBTITLE
DISC MENU
PLAYER MENU
OK
ZOOM SEARCH MODE
+10
Press s or B to select
(display), then press OK.
4
5
DISPLAY
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF ON
PROGRESSIVE OFF
4:3 LETTERBOX
AUTO
ON
OK
Press o or p to select an item, then press OK.
● If you selectedTV ASPECT, press o or p to select
a setting, then press OK.
Choose 4:3 LETTER BOX if you want to see the entire,
widened picture with black bars at the top and bottom of
the screen.This looks like the picture you see when
watching movies in a theater.This setting is possible only
if the DVD was recorded in the letterbox or widescreen
format.
Helpful Hints
Choose 4:3 PAN & SCAN for a full height picture, with
both sides trimmed. Some companies refer to this as
reformatting the picture to fit your TV screen and may
call it the regular or normal format.
Choose 16:9 WIDE if a widescreen TV is connected to
the DVD/VCR.
• Selecting a differentTV ASPECT
setting is only effective if it is avail-
able on the DVD. Check the DVD
Disc menu or case for details.
• You also can adjustTV ASPECT in
the QUICK SETUP menu that
● If you selected STILL MODE, press K or L to
select a setting, then press OK.
This function allows you to adjust the quality of a still
image.AUTO is the default setting.
If you select FIELD, still images will be stabilized but
coarse due to the small amount of data.
If you select FRAME, still images will be highly defined due
to the simultaneous output of two fields.
appears when you first press the
SETUP button.With QUICK select-
ed, press OK. Press p to selectTV
ASPECT, then press OK. Press
o
or p to choose a setting, then
press OK. Press SETUP to remove
the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 65
Display (cont’d) 65
Continued from previous page
STANDBY-ON
TIMER SET
● If you selected ANGLE ICON, press OK repeatedly
to turn it ON or OFF.The default setting is ON. Choose
ON to see the Angle icon when multiple camera angles
are available during DVD playback. Details are on page 55.
Choose OFF to disable the Angle icon.
● If you selected AUTO POWER OFF, press OK
repeatedly to turn it ON or OFF.The default setting is
ON. Choose ON if you want the DVD/VCR to switch to
VCR mode automatically if there is no activity at the
DVD Player for 35 minutes.
● If you chose PROGRESSIVE, press OK repeatedly
to turn PROGRESSIVE ON or OFF.The default setting is
OFF. Choose ON if your TV has Progressive Scan and if
the TV is connected to the DVD/VCR’s COMPONENT
VIDEO OUT jacks. Choose OFF otherwise.
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
6
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
DISPLAY
VCR
DVD
DISC
MENU
OK
5-6
STOP
PLAY
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
DISPLAY
DISPLAY
STILL MODE
DISPLAY
TV ASPECT
1
2
3
6
9
TV ASPECT
STILL MODE
ANGLE ICON
PROGRESSIVE OFF
AUTO POWER OFF ON
4:3 LETTERBOX
AUTO
ON
4:3 LETTER BOX
AUTO
FIELD
FRAME
4:3 PAN
&
SCAN
SLOW
16:9 WIDE
OK
OK
OK
4
7
5
8
0
TV ASPECT
STILL MODE
ANGLE ICON
ZOOM SEARCH MODE
+10
DISPLAY
DISPLAY
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF ON
PROGRESSIVE OFF
4:3 LETTERBOX
AUTO
ON
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF ON
PROGRESSIVE OFF
4:3 LETTERBOX
AUTO
ON
OK
OK
AUTO POWER OFF
PROGRESSIVE
Press SETUP to remove the menus.
● If PROGRESSIVE is ON, this message appears:
6
Press o or p to make a selection, then press OK.
If you select NO, the menu disappears and PROGRESSIVE
is OFF. If you selectYES, this appears:
Confirm again to use progressive scan.
If Picture is good, Select “YES”.
NO
YES
SELECT:
K
/
L
SET:OK
Helpful Hints
Confirm your setting, then press OK. The menu will
disappear and PROGRESSIVE will be ON.
If you do not press any buttons for 15 seconds, the
Progressive Scan will switch to OFF.
• You can set PROGRESSIVE to OFF
either in the DISPLAY menu or by
pressing and holding the PLAY
B
(DVD) button on the front of the
Player for more than five seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 66
66 Language
You can use the LANGUAGE settings to select different languages
for the Audio or Subtitles of DVDs, as well as languages for DVD
Disc menus and the menus of the DVD Player SETUP menus.
STANDBY-ON
TIMER SET
Press DVD to put the DVD/VCR in DVD mode.
SETUP
REC
AUDIO SUBTITLE ANGLE
The DVD light will appear on the front of the DVD/VCR.
1
2
REPEAT
REPEAT
A-B
While play is stopped, press SETUP.
The QUICK SETUP screen appears.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
2
TITLE
MODE
RETURN
DISPLAY
QUICK SETUP
VCR
DVD
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
ON
1
3-5
DISC
MENU
OK
OK
Press { or B to select CUSTOM at the top of the
menu, then press OK.
STOP
PLAY
3
SEARCH
REW
SEARCH
FF
PAUSE
The Language menu (
) will be selected. Press OK.
Helpful Hints
4
5
• If the DVD’s default settings for
Audio and Subtitle are the same
language, the subtitles may not
show unless you turn them on.
• Use the AUDIO and SUBTITLE
buttons to select Audio and
Subtitles available on the DVD.
Details are on pages 55 and 58.
• If you set AUDIO to ORIGINAL,
the default setting of the DVD
Audio will play.
o
p
Press
or
to select AUDIO, SUBTITLE, DISC
MENU, or PLAYER MENU.Then, press OK. The lan-
guage options for the selected item will appear.
AUDIO:The DVD’s audio plays
in the selected language.
LANGUAGE
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
•
If you set PLAYER MENU to
ESPAÑOL (Spanish) or FRANÇAIS
(French) and need English: Follow
steps 1-3.At step 4, the IDIOMA
or LANGUE menu will appear.
Press OK. Press p to select
MENU DU LECTEUR or MENU
REPRODUC., then press OK.
Press o to select ENGLISH, then
press OK.The menus will change
to English. Press SETUP to
OK
SWEDISH
SUBTITLE: Subtitles appear in
the chosen language.
LANGUAGE
SUBTITLE
OFF
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
OK
SWEDISH
remove the menus.
• You can change the PLAYER
MENU language in the QUICK
SETUP menu that appears when
you first press SETUP.
With QUICK selected, press OK.
PLAYER MENU will be selected.
Press OK. Press o or p to
choose a language, then press
OK. Press SETUP to remove the
menu.
DISC MENU:A DVD’s Disc
LANGUAGE
DISC MENU
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
DUTCH
menu appears in the chosen
language.
OK
PLAYER MENU:The DVD
Player’s Setup menu can be in
English, French, or Spanish only.
LANGUAGE
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
OK
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 67
Language (cont’d) 67
Press o or p to select a language, then press
STANDBY-ON
TIMER SET
OK. The language list continues on multiple screens.
Press o or p to move to the other screens.
●If you select OTHER for AUDIO, SUBTITLE, or
DISC MENU, press four Number buttons to
enter the code for the language you desire. Use
the Language Codes below.The language or lan-
guage code you select will appear in the Language
menu beside AUDIO, SUBTITLE, or DISC MENU.
6
SETUP
REC
AUDIO SUBTITLE ANGLE
7
6
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
DISPLAY
VCR
DVD
DISC
LANGUAGE
MENU
OK
LANGUAGE CODE
Please enter a 4-digit language code.
OK
STOP
PLAY
●You can select other languages for AUDIO,
SUBTITLE, and DISC MENU only if the language is
available on the Disc. If the language you select is
not recorded on the DVD, changing these settings
will have no effect.
SEARCH
REW
SEARCH
FF
PAUSE
NA508
SPEED
1
2
3
6
9
SLOW
4
7
5
8
0
Press SETUP to remove the menu.
ZOOM SEARCH MODE
7
+10
Language Codes
A-B
English
5160 Kannada
5161 Kashmiri
5166 Kazakh
5760 Panjabi
5765 Pashto
5757 Persian
6247
T
Abkhazian
4748 Esperanto
4747 Estonian
6265 Tagalog
5247 Tajik
6258 Tamil
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
4752
F-H
Kinyarwanda 6469 Polish
6563 Faroese
4759 Fiji
4764 Finnish
5471 French
4765 Frisian
5261 Kirghiz
5256 Kirundi
5255 Korean
5264 Kurdish
5271
5771 Portuguese 6266 Tatar
6460 Pushto
5761 Quechua
6265 Telugu
6367 Thai
5767 Rhaeto-Romance 6459 Tibetan
L-N
Romanian
5861 Russian
5847
6461 Tigrinya
6467 Tonga
Tsonga
4771 Gaelic (Scots) 5350 Laothian
Azerbaijani 4772 Galician
5358 Latin
Bangla
4860 Georgian
4847 German
5167 Greek
5747 Latvian
5051 Lettish
5158 Lingala
5868
S
Turkish
Bashkir
Basque
Bengali
Bhutani
Bihari
5868 Samoan
5860 Sangho
5866 Sanskrit
6559 Turkmen
6553 Twi
6547
4860 Greenlandic 5758 Lithuanian
U-Z
5072 Guarani
4854 Gujarati
4855 Hausa
4864 Hebrew
4853 Hindi
5971 Hungarian
5360 Macedonian 5957 Serbian
5367 Malagasy
5447 Malay
6564 Ukrainian
Urdu
6757
6764
6772
5953 Serbo-Croatian
5965
5958 Sesotho
5966 Setswana
5955 Shona
5964 Sindhi
5961 Singhalese
5960 Siswat
6047 Slovak
6051 Slovenian
Bislama
Breton
Bulgarian
Burmese
6554 Uzbek
5569 Malayalam
5455 Maltese
5467 Maori
I-K Marathi
6566 Vietnamese 6855
6660 Volapuk
6560 Welsh
6550 Wolof
6555 Xhosa
6565 Yiddish
6557 Yoruba
6558 Zulu
6561
6861
4971
6961
7054
5655
7161
7267
Byelorussian 4851
C-E
Icelandic
5565 Moldavian
5560 Mongolian
5547 Nauru
5551 Nepali
Cambodian 5759 Indonesian
Catalan
Chinese
Corsican
Croatian
Czech
4947 Interlingua
7254 Interlingue
4961 Inupiak
5464 Irish
4965 Italian
5047 Japanese
6058 Javanese
5557 Norwegian 6061 Somali
5347
O-R
Spanish
6149 Sundanese
6164 Swahili
5165
5566 Occitan
5647 Oriya
6567
Danish
Dutch
6569
5669 Oromo (Afan)6159 Swedish
6568
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 68
68 Audio
Change Audio settings based on other equipment you connected
to the DVD/VCR or according to your Disc sound features.These
settings only affect the Audio from the DVD Player of the
DVD/VCR.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
Press DVD to put the DVD/VCR in DVD mode.
2,7
The DVD light will appear on the front of the DVD/VCR.
C-RESET
CLEAR
1
2
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
While play is stopped, press SETUP.
The QUICK SETUP screen will appear.
DISPLAY
VCR
DVD
1
3-6
DISC
MENU
OK
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
ON
OK
STOP
PLAY
Press s or B to select CUSTOM at the top of the
menu, then press OK.
SEARCH
REW
SEARCH
FF
PAUSE
NA508
3
SPEED
1
2
3
6
9
SLOW
4
7
5
8
0
LANGUAGE
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
SUBTITLE
DISC MENU
PLAYER MENU
ZOOM SEARCH MODE
OK
+10
Press s or B to select AUDIO (
OK.
) , then press
4
5
6
Press o or p to select DRC, DOLBY DIGITAL or
DOWN SAMPLING, then follow step 6 accordingly.
●If you selected DRC, press OK repeatedly to turn
Dynamic Range Control (DRC) ON or OFF. Choosing ON
compresses the range of volume by suppressing loud
sounds and raising low sounds. DRC is available only on
Discs recorded in the Dolby Digital format.
●If you selected DOWN SAMPLING, press OK repeatedly
to choose ON or OFF. Choose ON to set downsampling
to 48 kHz. Choose OFF to set downsampling to 96 kHz.
DOWN SAMPLING is available only when the unit is con-
nected to a Stereo using the COAXIAL DIGITAL AUDIO
OUT jack.
Helpful Hints
• Dolby Digital sound must be
available on the DVD.
●If you selected DOLBY DIGITAL, press OK repeatedly to
select ON or OFF. Select ON if you used the COAXIAL
DIGITAL AUDIO OUT jack to connect the DVD/VCR to a
stereo that is Dolby Digital compatible. Details are on page
15. Otherwise, choose OFF.
• You can adjust DOLBY DIGITAL
in the QUICK SETUP menu that
appears when you first press
SETUP.With QUICK selected,
press OK. Press p to select
DOLBY DIGITAL. Press OK to
choose ON or OFF. Press SETUP
to remove the menu.
AUDIO
DRC
AUDIO
AUDIO
DRC
DOWN SAMPLING ON
DOLBY DIGITAL ON
ON
ON
DOWN SAMPLING ON
DRC
DOWN SAMPLING ON
DOLBY DIGITAL ON
ON
DOLBY DIGITAL
ON
• When you play a Disc that has
copyright protection, downsam-
pling will be at 48 kHz, even if
you set DOWN SAMPLING to
OFF.
OK
OK
OK
DRC
Down Sampling
Dolby Digital
Press SETUP to remove the menu.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 69
On-Screen Displays 69
DVD Displays
STANDBY-ON
TIMER SET
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
1
2
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
Press DISPLAY repeatedly to see the following dis-
plays during DVD play.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
7/49 0:01:46 - 0:03:27
3
1
Elapsed playing time
of the current Chapter;
remaining playing time
of the current Chapter
CH (Chapter):
Current Chapter number
/ total Chapters
DISPLAY
VCR
DVD
2-3
DISC
MENU
OK
1/2 0:00:00 - 1:23:45
TT (Title):
Current Title number
/ Total Titles
Elapsed playing time of the
current Title; remaining playing
time of the current Title
STOP
PLAY
SEARCH
REW
SEARCH
FF
PAUSE
BIT RATE: The amount of audio
and video data currently being read.
NA508
SPEED
C L0
1
2
3
6
9
Layer number, appears
only when playing a
two-layered Disc.
L0: Layer 0 is playing
L1: Layer 1 is playing
SLOW
4
7
5
8
Current Repeat setting, if active
C: Chapter repeat
T: Title repeat
A
B: A-B repeat
Press DISPLAY repeatedly or press RETURN to
remove the display.
3
Audio CD/Video CD Displays
STANDBY-ON
TIMER SET
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
SETUP
REC
AUDIO SUBTITLE ANGLE
1
2
REPEAT
REPEAT
A-B
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
Press DISPLAY repeatedly to see the following dis-
TITLE
MODE
RETURN
plays during Audio CD orVideo CD (without PBC ) 2-3
3
1
play.
DISPLAY
VCR
DVD
4/12 0:03:21 - 0:02:15
DISC
TR (Track):
Current Track number
/ total Tracks
Elapsed playing time
of the current Track;
remaining playing time
of the current Track
MENU
OK
STOP
PLAY
4/12 0:13:45 - 0:45:40
T
Current Repeat setting, if active
T: Track repeat
A: All Tracks repeat
ALL:
SEARCH
REW
SEARCH
FF
Current track number
/ total Tracks
PAUSE
A
B: A-B repeat
NA508
SPEED
Elapsed playing time
of the current Audio CD;
remaining playing time of
the current Audio CD
1
2
3
6
9
SLOW
4
7
5
8
Press DISPLAY repeatedly or press RETURN to
remove the display.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 70
70 Black Level,Virtual Surround
Black Level
Adjust Black Level to brighten the DVD orVideo CD picture dur-
ing playback.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
REPEAT
REPEAT
A-B
1
2
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
During DVD orVideo CD play, press MODE so the
Black Level icon shows in the top left corner of the TV
DISPLAY
screen.
VCR
DVD
1
3
2
2
DISC
MENU
OK
ON
STOP
PLAY
Within 10 seconds, press OK repeatedly to choose
ON or OFF. ON brightens the dark parts of the picture.
SEARCH
REW
SEARCH
FF
PAUSE
3
OFF shows the original picture as recorded.
Virtual Surround
You can enjoy improved stereo sound when you play DVDs,Audio
CDs,Video CDs, or MP3 files recorded in Dolby Digital or Pulse
Code Modulation (PCM). Check the Disc case for details on avail-
ability.
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE ANGLE
REPEAT
REPEAT
A-B
Press DVD to put the DVD/VCR in DVD mode.The DVD
light will appear on the front of the DVD/VCR.
C-RESET
CLEAR
PREV/
CH
NEXT/
CH
1
2
3
TITLE
MODE
RETURN
DISPLAY
VCR
DVD
During Disc play, press MODE so theVirtual Surround
icon appears in the top left corner of the TV screen.
1
3
DISC
MENU
OK
While theVirtual Surround icon appears, press OK
STOP
PLAY
to choose 1, 2, or OFF. The default setting is OFF.
The icon will disappear after about 10 seconds.
SEARCH
REW
SEARCH
FF
PAUSE
OFF
Helpful Hints
• Virtual Surround is available only
when the DVD/VCR is connected
to a Stereo using the and white
DVD/VCR AUDIO OUT jacks on
the DVD/VCR.
• Virtual Surround is active only if
you set Stereo Sound Mode to
Stereo. Details are on page 58.
• The Black Level andVirtual
Surround settings will be saved
even if you turn off the DVD/VCR.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 71
Initializing 71
Use INITIALIZE to return all the DVD Player’s Setup menu items
(except for PARENTAL) to their default settings.
STANDBY-ON
TIMER SET
Press DVD to put the DVD/VCR in DVD mode.The DVD
SETUP
REC
AUDIO SUBTITLE ANGLE
light will appear on the front of the DVD/VCR.
1
REPEAT
REPEAT
A-B
2,5
3-4
C-RESET
CLEAR
While play is stopped, press SETUP.
The QUICK SETUP screen appears.
PREV/
CH
NEXT/
CH
TITLE
MODE
RETURN
2
DISPLAY
VCR
DVD
1
DISC
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
ON
MENU
OK
OK
STOP
PLAY
Press B to select INIT. (INITIALIZE) at the top of
the menu, then press OK.
SEARCH
REW
SEARCH
FF
PAUSE
3
4
5
NA508
SPEED
1
2
3
6
9
SLOW
INITIALIZE
Initialize?
NO
4
7
5
8
0
YES
ZOOM SEARCH MODE
+10
o
p
Press
or
to selectYES.Then, press OK twice. To
cancel, select NO instead.
INITIALIZE
Initialize?
NO
YES
Press SETUP to remove the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 72
72 Glossary
AUDIO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive
audio from another source (IN) or send audio to another system (OUT).These jacks
are red (right) and white (left).
Automatic Channel Setup: process in which theVCR memorizes all available TV
channels.Then, when you press NEXT∑/CH o or PREV w/CH p inVCR mode, you
only scan through channels you receive.
Bands: settings that allow you to tune channels.
• Antenna –VHF (very high frequency; channels 2-13) and UHF (ultra high frequen-
cy; channels 14-69).
• Cable – standard channels 1-125 may be received without a Cable Box.
Cable Box/Satellite Receiver Output Channel: 03 or 04.
COAXIAL DIGITAL AUDIO OUT jack: Sends digital audio to a Stereo, allowing
you to adjust the volume at the Stereo.This connection provides the 5.1 channel sur-
round sound as heard in movie theaters.This jack on the DVD/VCR is black.
COMPONENTVIDEO OUT (Y CB/PB CR/PR) Jacks: jacks on the back of the
DVD/VCR that send high-quality DVD video to a TV with ComponentVideo In jacks.
This connection provides the best picture quality for the DVD Player of the
DVD/VCR.
Dolby Digital: A surround sound system that provides 5.1 channel sound as used in
movie theaters.
Dubbing: copying a video cassette using anotherVCR.
HQ: high quality; a feature in theVCR circuitry which provides enhanced picture
detail.
Line Input: The channel to which you set your DVD/VCR during video cassette
copying. If you connected the other video equipment to the AUDIO andVIDEO In
jacks on the front of the DVD/VCR, select L2. If you used the AUDIO andVIDEO IN
jacks on the back of the DVD/VCR, select L1. If you accidentally enter Line Input
mode, press NEXT ∑/CH o or PREVw/CH p or the Number buttons to select
another channel.
OTR: One-Touch Recording; a timed recording on theVCR that starts immediately
and records for 30 minutes to 8 hours.
RF coaxial cable: A black cable supplied with your DVD/VCR. Use it to connect
your DVD/VCR to your TV, Cable Box, or Satellite Receiver.
S-Video: Produces a clearer DVD picture by sending separate signals for the lumi-
nance and the color. S-Video only provides a picture for the DVD Player of the
DVD/VCR.
Tape Speeds: how fast the video cassette travels during a recording or playback.The
faster the tape speed, the better the picture quality. Slower tape speeds affect picture
quality, but you can record more onto a videotape.
• SP (standard play) – fastest tape speed (recording time for a T120 tape is approxi-
mately two hours); best picture quality.
• LP (long play) – average tape speed.You cannot record in LP with thisVCR. If tapes
were recorded on a differentVCR in LP speed, the tape will play in LP on the
DVD/VCR.
• SLP (super long play) – slowest tape speed (recording time for a T120 tape is
approximately six hours).This speed allows the maximum recording on a single
videotape.
VIDEO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive
video from another source (IN) or send video to other video equipment or a TV
(OUT).These jacks are yellow.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 73
Specifications 73
VCRVideo Heads
Four heads - Hi-Fi
Antenna
VHF/UHF – 75 ohm external antenna terminal
VHF Output Signal
Channel 03 or 04
75 ohms unbalanced
DVD Color System
NTSC
Frequency Response
DVD (linear sound):
20 Hz to 22 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
Audio CD: 20 Hz to 20 kHz
Signal-to-Noise Ratio
Audio CD: 120 dB JEITIA
(Japan Electronics and InformationTechnology Industries Association)
Dynamic Range
DVD (linear sound): 102 dB
Audio CD: 99 dB (JEITIA)
Total Distortion Factor
Audio CD: 0.003% (JEITIA)
DVD: 0.0025%
Wow and Flutter
Below the measurement limitation
( 0.001% W PEAK) (JEITIA)
Power Requirement
120V AC +/- 10%, 60 Hz +/- 0.5%
Power Consumption
Power on: 21 W
Power off: 3.6 W
OperatingTemperature
41°F (5°C) to 104°F (40°C)
Relative Humidity
30% to 80%
Dimensions
17-3/16” (W) x 3-3/4” (H) x 9-3/16” (D)
(435mm x 94mm x 233mm)
Weight
6.0 lbs. (2.7 kg.)
NOTE: Designs and specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 74
74 Helpful Hints
If you are having problems with your product, check this list of problems and possible solutions before
requesting service.You may be able to solve the problem yourself.
If you need to call a customer service representative, please know the model number and serial number of
your product before you call.This information is displayed on the back of the product.Also, please take a
moment to identify the problem you are having, and be prepared to explain this to the representative. If you
believe the representative will need to help you with operations, please stay near the product. Our repre-
sentatives will be happy to assist you.
The DVD/VCR has no power.
• Make sure the power cord is connected completely to an AC (alternating current) outlet.
y button to turn on the DVD/VCR.The DVD/VCR turns on in the mode it
• Press the STANDBY-ON
was in when you turned it off. If there has been a power failure, it will turn on inVCR mode. Press DVD
to put the unit in DVD mode. PressVCR to put the unit inVCR mode. Or, press SOURCE on the front of
the DVD/VCR to switch between the two modes.
The remote control will not operate the DVD/VCR.
• Aim the remote control directly at the remote sensor on the front of the DVD/VCR, not toward the TV.
Details are on page 22.
• Remove all obstacles between the remote control and the DVD/VCR.
• Inspect and/or replace the batteries in the remote control. Details are on page 16.
• Use the remote control within 23 feet of the DVD/VCR.
• When using the DVD Player, press the DVD button, then try the other DVD feature buttons. Press DVD
so the DVD light appears on the front of the DVD/VCR.This means the DVD/VCR is in DVD mode.
• To use theVCR, pressVCR, then try the otherVCR feature buttons. PressVCR so theVCR light appears
on the front of the DVD/VCR.This means the DVD/VCR is inVCR mode.
There is no picture in DVD mode.
• Make sure the video cable is connected correctly.You may connect either the yellow video cable (sup-
plied), an optional S-Video cable, or optional component video cables. Make sure the TV is set to the cor-
rectVideo In channel (usually the AUX IN,A/V IN,Auxiliary In, EXT or External In, ComponentVideo In,
or S-Video In channel). Check your TV owner’s manual for details. Details are on pages 11-15.
• If you only used the supplied black RF coaxial cable, make sure the TV is set to channel 3 or 4 (the out-
put channel of the DVD/VCR). Details are on pages 8-10. Or, if you have a Cable Box/Satellite Receiver,
make sure the TV is set to the Cable Box/Satellite Receiver output channel (usually 03 or 04).
• Insert a DVD that is playable on this DVD/VCR. Details are on page six.
• Make sure the DVD/VCR is in DVD mode. Press DVD or SOURCE so the DVD light appears on the
front of the DVD/VCR.
• Check if Progressive Scan is set correctly according to your connection to a TV. Details are on page seven.
Enable Progressive Scan at the DVD Player only if you used the ComponentVideo connection to a TV
that has Progressive Scan. Details are on pages seven, 12, and 64-65.
Disc cannot be played.
• Insert a playable Disc. Details are on page six.
• Place the Disc correctly in the Disc tray. If the Disc is one-sided, place the Disc in the tray with the label
facing up. If the Disc is two-sided, make sure the label of the side you want to play is facing up.
• Clean the Disc. Make sure the Disc is not scratched or warped.
• Cancel the Parental Controls, enter the password, or change the control level. Details are on pages 56-57.
• Make sure the Disc is labelled for use in Region 1 or ALL regions and is NTSC or PAL compatible. Details
are on page six.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 75
Helpful Hints (cont’d) 75
There is no sound.
• Connect the audio cables firmly. Make sure the cables are connected to the AUDIO IN jacks on the TV
or Stereo. Details are on pages 11-14.
• Check the audio settings of the DVD Player. Details are on page 68.
• Check the audio settings of the DVD. For example, you may have selected “soundtrack” play or an
unavailable sound setting (such as Dolby Digital). Details are on pages 58 and 68. Try other sound options
provided in the DVD Disc menu.
• If you used audio cables (instead of only using the supplied black RF coaxial cable) make sure the TV or
Stereo is set to the correct Audio In channel (usually the AUX IN,Auxiliary In,A/V IN,Audio In, or
External In channel). See your TV or Stereo owner’s manual for details.
The picture is distorted.
• Connect the DVD/VCR directly to the TV. Details are on pages 8-15. Do not connect the DVD/VCR to a
VCR, then connect theVCR to the TV. Copyright protection systems in theVCR could distort the picture
playing on the DVD/VCR.
• There are some cases where a Disc or videotape picture may be distorted slightly because of the quality
in which it was recorded.This is not a malfunction of the DVD/VCR.
• Make sure the Disc is compatible with the DVD Player of the DVD/VCR. Details are on page six.
• If your TV is not PAL compatible, DVDs recorded in the PAL color system may play only in black and
white, the picture may roll continuously, or the picture may appear distorted.
You cannot change the camera angle of a DVD.
• The DVD might not contain segments recorded from different camera angles. See if multiple angles are
available by referring to the Disc case or DVD Disc menu. Details are on page 55.
You cannot change the audio or subtitle language of a DVD.
• The DVD does not contain audio or subtitles in the desired language. Not all DVDs contain audio or sub-
titles in multiple languages. See if other languages are available by referring to the Disc case or DVD Disc
menu. Details are on pages 55 and 58.
An X appears in the top right corner of theTV screen when you try a DVD feature.
• The operation is not available at the current time or the feature is not available on the Disc. Some fea-
tures are only available during playback. Others can be accessed only if play is stopped.Try stopping or
playing the Disc, then try the feature again.
The DVD/VCR switches from DVD mode toVCR mode after 35 minutes of no activity.
• When AUTO POWER OFF is set to ON, the DVD/VCR switches itself from DVD mode toVCR mode if
Disc playback stops for more than 35 minutes and you press no buttons on the remote or the
DVD/VCR. Details are on pages 64-65. This prevents possible damage to your TV’s picture tube that can
occur if a still image is left on too long.
A screen saver appears on theTV screen during DVD mode.
• The DVD logo will appear on the TV screen when you stop Disc playback.You cannot remove it.
You want to use the DVD Player during aVCR timer recording or while
is on the display panel.
y
• Press STANDBY-ON
to turn on the DVD/VCR. Press DVD to choose DVD mode, then continue with
other DVD features as described in this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 76
76 Helpful Hints (cont’d)
Power Failure
• Clock setting, language selection, and channel setup may be lost if the power fails. See pages 26-30 to set
up the channels, clock, and language again.
TheVCR will not record aTV program.
• Put the DVD/VCR inVCR mode. PressVCR or SOURCE so theVCR light appears on the front of the
DVD/VCR.
• Check the connections between the DVD/VCR,TV, antenna/Cable TV signal, and Cable Box/Satellite
Receiver (if applicable). Details are on pages 8-15. ForVCR features, you must connect the DVD/VCR to a
TV with the RF coaxial cable or the yellow video cable as described on pages 8-11.
• Make sure the video cassette has a record tab. Details are on page 32.
TheVCR will not perform a timer recording.
• Make sure the recording start and stop times are set correctly. Details are on pages 36-38.
• Make sure a tape is in theVCR and the tape has a record tab. Details are on page 32. If, after programming
a timer recording, you press TIMER SET without putting a tape in the DVD/VCR,
• If the record tab on a tape is missing, the DVD/VCR will eject the tape.The
will blink.
• Press TIMER SET to put the DVD/VCR in standby mode for the timer recording.The
on the display panel.
will blink.
should appear
• Make sure theVCR clock is set. Details are on pages 28-29.
• TheVCR may not perform or continue a timer recording if the power fails.
• If you have a Cable Box/Satellite Receiver, set timer recordings differently. Details are on page nine.
• Finish programming a timer recording at least five minutes before it is set to begin.
• 12 p.m. is noon; 12 a.m. is midnight.
There is no picture or the picture is noisy or has streaks during video cassette playback.
• Put the DVD/VCR inVCR mode. PressVCR or SOURCE so theVCR light appears on the front of the
DVD/VCR.
• If you used the supplied RF coaxial cable to connect the DVD/VCR to the TV, make sure the TV is on the
same channel as the DVD/VCR’s output channel (03 or 04).The DVD/VCR’s output channel is channel 3
when you receive it.To change it to channel 4, see page eight. Make sure channel 03 or 04 is properly
adjusted at the TV.
Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correctVideo In
channel at the TV. Details are on pages 11-15.
• Adjust the tracking. Details are on page 44.
• TVs placed too close to the DVD/VCR can cause interference during tape play. Move the DVD/VCR away
from the TV.
The Number buttons won’t work forTV channels above 69.
• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter chan-
nel numbers as a three-digit number. If you do not have Cable TV, only channels 2-69 are possible.
TV programs cannot be watched normally.
• Check the connections between the DVD/VCR,TV, antenna/Cable TV signal, and Cable Box/Satellite
Receiver (if applicable). Details are on pages 8-15.
Poor reception
• You may need to tune your TV again. Or, reset channels at theVCR using CHANNEL SET UP.
Details are on pages 26-27.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 77
Helpful Hints (cont’d) 77
You cannot insert a video cassette.
• Insert the tape, window side up, with the record tab facing you.
• Make sure a tape isn’t already in theVCR by pressing STOP/EJECT C A on the front of the DVD/VCR.
• Gently push on the center of the tape when putting it in theVCR. Never force the tape into theVCR.
• If a timer recording is set, you cannot insert a tape without a record tab.
You cannot remove the tape.
• Make sure the power plug is completely connected to a power outlet.
• If you have set a timer recording, press TIMER SET to delay the recording.The
will disappear from the
display panel.Then, press STOP/EJECT C A on the front of the DVD/VCR to eject the tape. Insert anoth-
er tape and press TIMER SET to reset the timer recording.
•
Unplug the DVD/VCR power cord for five minutes.Then, plug in the power cord again and press STANDBY-
ON
y
on the DVD/VCR. Press STOP/EJECT C A on the DVD/VCR three to five times. If the tape still
does not eject, you may need to have an authorized servicer remove the tape.
DVD/VCR ejects the tape when you press REC I, RECORD I, orTIMER SET.
• Make sure the tape has a record tab. Details are on page 32.
Satellite Receiver Hookups
• Watching one TV channel while recording another may not be possible if you have a Satellite Receiver. Set
your TV to channel 03 or 04, then make your channel selections at the Satellite Receiver.
• With many Satellite Receiver hookups, if you use audio and video cables to connect your DVD/VCR to
your TV, you will have to put your DVD/VCR in Line Input mode (L1 or L2).
Line Input mode
• If you accidentally enter Line Input mode (L1 or L2 will appear on yourTV screen briefly), press NEXT ∑/CH o or
PREV w/CH p or the Number buttons to select another channel.
Hi-Fi Stereo Sound
•
During playback, Hi-Fi audio may revert to normal audio when you adjust tracking.
• When connecting the DVD/VCR to a TV with the red and white audio cables, you will only get stereo
sound if you connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on
your TV, and if the TV is on its Audio/Video In channel. See your TV owner’s manual for details.
• When you connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on your
TV, the stereo light on the TV might not glow. If the status display indicates you are receiving stereo, you
are. Details are on page 45.
• Only tapes recorded in Hi-Fi audio will play in Hi-Fi audio.Tapes recorded in normal audio will play in
monaural (single-channel) audio.
Cleaning theVideo Heads
• Your DVD/VCR automatically cleans the video heads of theVCR each time you insert a tape. However,
the heads may become dirty. If so, have an authorized servicer clean the video heads. Eventually, the heads
may need to be replaced.
The playback picture is too dim, too bright, or fluctuates in brightness.
• Some programs may be broadcast with copyright protection technology in order to protect the rights of
copyright owners.This technology is used on programs that are recorded on video cassettes or DVDs, as
well as some programs broadcast by antenna/cable/satellite television channels. Programs broadcast with
copyright protection may not record clearly. Likewise, if you play a tape that is a recording of a copyright
protected program, the picture may not be clear.Tapes of copyright protected programs may have a pic-
ture that is dark or dim, or the brightness of the picture may fluctuate.Therefore, avoid recording or play-
ing copies of copyright protected programs.
• This DVD/VCR incorporates copyright protection technology that is protected by method claims of cer-
tain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized
by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 78
78 Care and Maintenance
Cleaning the DVD/VCR
• Wipe the front panel and other exterior surfaces of the DVD/VCR with a soft,
slightly damp cloth.
• Never use a solvent, thinner, benzene, or alcohol to clean the DVD/VCR. Do not
spray insecticide liquid near the DVD/VCR. Such chemicals may discolor the surface
or damage the DVD/VCR.
Cleaning a Disc
• Use a soft, dry cloth to wipe the Disc.
• Wipe the Disc in a straight line from the center to the edge. Never wipe the Disc in
a circular motion.
• Do not use detergent or abrasive cleaning agents.
• Handle the Discs so fingerprints and dust do not adhere to the Discs.
• Always store the Disc in its protective case when it is not in use.
Checking the Laser
• If the DVD Player does not operate as described in this manual, its laser may be
dirty. Consult an Authorized Service Center for inspection and cleaning of the laser.
Caring forVideo Cassettes
• Use only cassettes with the
mark.
• Remove any light adhesive stick-on notes from the video cassette before putting the
cassette in theVCR. Removable labels can jam theVCR.
Caring for theVCR’sVideo Heads
• Periodic maintenance is required to maintain your DVD/VCR’s excellent perfor-
mance.TheVCR has an Automatic Head Cleaner. However, the video heads will
require replacement eventually. Only an authorized service center should perform
this service.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 79
Limited Warranty 79
MAGNAVOX LIMITED WARRANTY
Ninety (90) Days Free Product Exchange
MAGNAVOX warrants this product against defect in
material or workmanship, subject to any conditions set
forth as follows:
products damaged by these modifications.
• Damage occurring to product during shipping when
improperly packaged or cost associated with pack-
aging
PROOF OF PURCHASE:
• Product lost in shipment and no signature verifica-
tion of receipt can be provided.
• A product used for commercial or institutional pur-
poses (including but not limited to rental purposes).
• Product sold AS IS or RENEWED
You must have proof of the date of purchase to
exchange the product.A sales receipt or other docu-
ment showing the product and the date that you pur-
chased the product, as well as the authorized retailer
included, is considered such proof.
WHERE WARRANTY EXCHANGE IS AVAIL-
ABLE:
COVERAGE:
Warranty coverage begins the day you buy the prod-
uct. For a period of ninety (90) days from the date of
purchase, if the product is determined to be defective,
Magnavox will exchange the defective product with a
new or renewed product, at its option, at no charge.
The replacement product is covered only for the war-
Exchange is available in all countries where Magnavox
officially distributes the product. In countries where
Magnavox does not distribute the product, the local
Magnavox organization will attempt to exchange the
product, although there may be a delay if the appropri-
ate product is not readily available or special customs
ranty period of the original product.When the warran- processes are implied.
ty on the original product expires, the warranty on all
replaced products also expires.When it is necessary
for you to ship the product to Magnavox for exchange, RICO, OR U.S.VIRGIN ISLANDS…
FOR EXCHANGE INTHE U.S.A., PUERTO
you will pay the shipping cost for shipment to
Magnavox. Magnavox will pay the shipping costs when
returning a product to you.
Contact Magnavox Customer Care Center at:
1-800-705-2000
FOR EXCHANGE IN CANADA…
1-800-661-6162 (French Speaking)
Note:The exchange model supplied will be the most
comparable one in Magnavox current inventory.
Shipping of your product to Magnavox implies intent to
follow the specified requirements of the warranty and
exchange program. Product received by Magnavox can-
not be returned. Replacement product can only be
sent if all warranty requirements are met. Failure to
follow all requirements can result in delay of exchange
process.
1-800-705-2000 (English or Spanish Speaking)
REPLACEMENT AS PROVIDED UNDER THIS WAR-
RANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. MAGNAVOX SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAM-
AGES FOR BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT. EXCEPT TO THE
EXTENT PROHIBITED BY APPLICABLE LAW,ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
EXCLUDED FROM WARRANTY COVERAGE
Your warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the prod-
uct, adjustment of customer controls on the prod-
uct, and installation or repair of antenna systems
outside of the product.
Some states do not allow the exclusions or limitation
of incidental or consequential damages, or allow limita-
tions on how long an implied warranty lasts, so the
• Product repair and/or part replacement because of
improper installation, connections to improper volt- above limitations or exclusions may not apply to you.
age supply, abuse, neglect, misuse, accident, unautho-
rized repair or other cause not within the control
of Magnavox.
In addition, if you enter into a service contract agree-
ment with the MAGNAVOX partnership within ninety
(90) days of the date of sale, the limitation on how
long an implied warranty lasts does not apply.
• A product that requires modification or adaptation
to enable it to operate in any country other than
the country for which it was designed, manufac-
tured, approved and/or authorized, or repair of
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Magnavox, P.O. Box 520890, Miami, FL 33152 (402) 536-4171
EL6578E001 / 01-04
Download from Www.Somanuals.com. All Manuals Search And Download.
H9660UD_2.qx4 04.4.14 4:48 PM Page 80
80 Information Index
ac power cord . . . . . . . . . . . . . . . . .23 hookups
rf coaxial cable . . . . . . . . . . . . . . .8-10
angle button . . . . . . . . . . . . . . . .24, 55
angle icon . . . . . . . . . . . . . . . . . .64-65
ant-in (antenna in) jack . . . . . .8-15, 23
ant-out (antenna out) jack . . .8-10, 23
arrow buttons . . . . . . . . . . . . . . . . .25
audio button . . . . . . . . . . . . . . . .25, 58
cable box/satellite receiver . . . .9-10
component video . . . . . . . . . . . . .12 safety precautions . . . . . . . . . . . . . . .3
S-video . . . . . . . . . . . . . . . . . . . . .13 sap (second audio program) . . . .45-46
stereo . . . . . . . . . . . . . . . . . . .14-15 search/ff g button . . . . . . . . . . . . .24
tv . . . . . . . . . . . . . . . . . . . . . . .8-15 search/rew h button . . . . .24, 43, 49
search mode button . .24, 42, 50-51, 54
audio in/out jacks . . . . .11-14, 22-23, 35 index search . . . . . . . . . . . . . . . . . . .42 searching . . . . . . . . . . . . . . . . . . .43, 49
audio settings . . . . . . . . . . . . . . .64-65 initializing . . . . . . . . . . . . . . . . . . . . .71 sensor (remote) . . . . . . . . . . . . . . . .22
auto power off . . . . . . . . . . . . . . . . .69
setup button . . . . . . . . . . . . . . . . . .24
auto repeat . . . . . . . . . . . . . . . . . . .40 jpeg . . . . . . . . . . . . . . . . . . . . . . .62-63 slow button . . . . . . . . . . . . . . . .24, 43
automatic slow motion . . . . . . . . . . . . . . . .43, 59
tape playback . . . . . . . . . . . . . . . .44 language (dvd) . . . . . . . . . . . . . . .66-67 slp . . . . . . . . . . . . . . . . . . . . . . . . . .72
tape rewind, eject . . . . . . . . . . . . .44 language (vcr) . . . . . . . . . . . . . . . . . .30 source button . . . . . . . . . . . . . . . . .22
a-b repeat . . . . . . . . . . . . . . . . . . . .53 line input mode . . . . . . . . . . . . .35, 72 sp . . . . . . . . . . . . . . . . . . . . . . . . . . .72
a-b repeat button . . . . . . . . . . . .24, 53 long play . . . . . . . . . . . . . . . . . . . . . .72 specifications . . . . . . . . . . . . . . . . . .73
lp . . . . . . . . . . . . . . . . . . . . . . . . . . .72 speed button . . . . . . . . . . . . . . . . . .25
batteries . . . . . . . . . . . . . . . . . . . . . .16
standard play . . . . . . . . . . . . . . . . . .72
bit-rate display . . . . . . . . . . . . . . . . .69 markers . . . . . . . . . . . . . . . . . . . . . .54 standby-on y button . . . . . . . . .22, 24
black level . . . . . . . . . . . . . . . . . . . .70 menus . . . . . . . . . . . . . . . . . . . . . .5, 48 status display (vcr) . . . . . . . . . . . . . .31
mode button . . . . . . . . . . . . .25, 60-61 step-by-step playback . . . . . . . . . . . .52
c-reset/clear button . . . . . . . . . .25, 41 mp3 display . . . . . . . . . . . . . . . . . . .63 stereo broadcast
camera angle . . . . . . . . . . . . . . . . . .55 mp3 playback . . . . . . . . . . . . . . . . . .62
hookups . . . . . . . . . . . . . . . . .11, 14
cassette compartment . . . . . . . . . . .21
receiving/recording . . . . . . . . .45-46
channel
next∑/cho button . . . . . . . . . .25, 51 stereo sound . . . . . . . . . . . . . . . . . .58
adding . . . . . . . . . . . . . . . . . . . . . .27 number buttons . . . . . . . . . . . . . . . .25 stereoTV hookups . . . . . . . . . . . . .11
deleting . . . . . . . . . . . . . . . . . . . .27 still picture . . . . . . . . . . . . . . . . .43, 52
selection . . . . . . . . . . . . . . . . . . . .25 ok button . . . . . . . . . . . . . . . . . . . . .25 stop button . . . . . . . . . . . . . . . . . . .24
setup . . . . . . . . . . . . . . . . .17, 26, 27 on-screen status displays (vcr) . . . . .31 stop/eject button . . . . . . . . . . . . . . .22
chapters . . . . . . . . . . . . . . . . . . . . . .50 one-touch recording . . . . . . . . . . . .34 subtitle button . . . . . . . . . . . . . .25, 55
clock . . . . . . . . . . . . . . . . . . .21, 28-29 open/close A button . . . . . . . . .19, 22 super high speed searching . . . . . . .43
coaxial (digital audio out) jack . .15, 23
super long play . . . . . . . . . . . . . . . . .72
component video out jacks . . . .12, 23 parental controls . . . . . . . . . . . . .56-57 s-video out jack . . . . . . . . . . . . .13, 23
connections . . . . . . . . . . . . . . . . .7-15 password . . . . . . . . . . . . . . . . . . . . .56
contents, table of . . . . . . . . . . . . . . . .4 pause button . . . . . . . . . .24, 43, 52, 59 table of contents . . . . . . . . . . . . . . . .4
controls
play button . . . . . . . . . . . .18-19, 22, 24 tape
dvd/vcr . . . . . . . . . . . . . . . . . .22-23 player menu . . . . . . . . . . . . . . . . . . .66
remote . . . . . . . . . . . . . . . . . .24-25 playing discs . . . . . . . . . . . . . . . . . . .19
copyright protection . . . . . . . . . .35, 77 playing tapes . . . . . . . . . . . . . . . . . . .18
counter . . . . . . . . . . . . . . . . . . . .31, 41 power
duplication . . . . . . . . . . . . . . . . . .35
eject . . . . . . . . . . . . . . . . .22, 44, 77
speed . . . . . . . . . . . . . . . . . . . . . .72
time search . . . . . . . . . . . . . . . . . . .42
cord . . . . . . . . . . . . . . . . . . . . . . .23 timer recording
disc menus . . . . . . . . . . . . . . . . .48, 66
on light . . . . . . . . . . . . . . . . . . . . .22
cancelling . . . . . . . . . . . . . . . . . . .38
setting . . . . . . . . . . . . . . . . . . .36-38
disc tray . . . . . . . . . . . . . . . . . . . . . .20 prev w/ch p button . . . . . . . . .25, 51
disc/menu button . . . . . . . . . . . .25, 52 program . . . . . . . . . . . . . . . . . . . . . .60 timer set button . . . . . . . . . .24, 36-38
display button . . . . . . . . . . . .25, 31, 69
display messages . . . . . . . . . . . . . . . .20 quick setup . . . . . . . . . . . . . .65, 66, 68 titles . . . . . . . . . . . . . . . . . . . . . . . . .48
display panel . . . . . . . . . . . . . . . .20-21 tracking . . . . . . . . . . . . . . . . . . . . . .44
title button . . . . . . . . . . . . . . . . .24, 48
displays . . . . . . . . . . . . . . . . .31, 63, 69 random . . . . . . . . . . . . . . . . . . . . . .61 tracks . . . . . . . . . . . . . . . . . . . . . . . .51
dolby digital . . . . . . . . . . . . . . . . . . .68 rear panel . . . . . . . . . . . . . . . . . . . . .23 tv aspect . . . . . . . . . . . . . . . . . . .64-65
down sampling . . . . . . . . . . . . . . . . .68 rec (record) button . . . . . . .24, 32, 34 tv hookups . . . . . . . . . . . . . . . . . .8-15
drc (dynamic range control) . . . . . .68 rec (record) light . . . . . . . . . . . . . . .21
duplication (dvd to videotape) . . . . .39 record button . . . . . . . . . . . . . . .22, 32 vcr
duplication (tape) . . . . . . . . . . . . . . .35 recording
button . . . . . . . . . . . . . . . . . . . . .24
light . . . . . . . . . . . . . . . . . . . . . . .21
dvd button . . . . . . . . . . . . . . . . . . . .24
dvd light . . . . . . . . . . . . . . . . . . . . . .20
basic . . . . . . . . . . . . . . . . . . . . . . .32
one channel/watching another . . .33 vcr/tv button . . . . . . . . . . . . . . . . . .25
prevention . . . . . . . . . . . . . . . . . .32 video in/out jacks . . . . .11, 14-15, 22-23
timer . . . . . . . . . . . . . . . . . . . .36-38 virtual surround . . . . . . . . . . . . . . . .70
remote control
ejecting a tape . . . . . . . . . . . .22, 44, 77
fast forward . . . . . . . . . . . . . . . .43, 49
front panel . . . . . . . . . . . . . . . . . . . .22
batteries . . . . . . . . . . . . . . . . . . . .16 warranty . . . . . . . . . . . . . . . . . . . . .79
buttons . . . . . . . . . . . . . . . . . .24-25
sensor . . . . . . . . . . . . . . . . . . . . .22 zoom . . . . . . . . . . . . . . . . . . . . . . . .59
glossary . . . . . . . . . . . . . . . . . . . . . .72 repeat button . . . . . . . . . . . . . . .24, 53 zoom button . . . . . . . . . . . . . . .25, 59
repeat (discs) . . . . . . . . . . . . . . . . . .53
head cleaner . . . . . . . . . . . . . . . . . . .77 repeat (tape) . . . . . . . . . . . . . . . . . .40
helpful hints . . . . . . . . . . . . . . . .74-77 rerecording . . . . . . . . . . . . . . . . . . .35
hi-fi stereo sound . . . . . . . . . . . . . . .47 resume . . . . . . . . . . . . . . . . . . . . . . .52
This owner’s manual is made of recyclable
materials. Remember to recycle!
return button . . . . . . . . . . . . . . . . . .24
reverse searching . . . . . . . . . . . .43, 49
IB8480E002 Printed In China
0VMN04140A / H9660UD * * * *
Download from Www.Somanuals.com. All Manuals Search And Download.
|