OWNER’S MANUAL
27MDTR10S
COLOR TV WITH BUILT-IN VCR/DVD PLAYER
NEED HELP?CALL US!
MAGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH ANY
QUESTIONS ABOUT YOUR NEW PRODUCT. WE CAN GUIDE YOU THROUGH
CONNECTIONS, FIRST-TIME SETUP, AND ANY OF THE FEATURES.
WE WANT YOU TO START ENJOYING YOUR NEW PRODUCT RIGHT AWAY.
CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT.
1-800-705-2000
OR VISIT US ON THE WEB AT WWW.MAGNAVOX.COM
IMPORTANT!
RETURN YOUR WARRANTY REGISTRATION CARD WITHIN 10 DAYS.
SEE WHY INSIDE.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety and General Information 3
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
Federal Com m unications Com m ission (FCC) W arning: Any unauthorized changes or
modifications to this equipment void the user’s authority to operate it.
Laser Safety: This unit employs a laser. Only a qualified service person should remove the cover or
attempt to service this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM. THE BEAM IS LOCATED INSIDE, NEAR THE DECK MECHANISM.
Special Inform ation for Canadian Users: This Class B digital apparatus complies with Canadian
ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio/TV Interference: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and the receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Copyright Protection: Unauthorized copying, broadcasting, public performance and lending of Discs
are prohibited. This product incorporates copyright protection technology that is protected by method claims
of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation
and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Note to the Cable TV System Installer: This reminder calls the Cable TV system installer’s
attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding –
in particular, specifying that the cable ground shall be connected to the grounding system of the building, as
close to the point of cable entry as possible.
Declaration of Conform ity
Model Number:
Trade Name:
27MDTR10S
Magnavox
Responsible Party: Philips Consumer Electronics
P.O. Box 14810
Knoxville, TN 37914-1810
(865) 521-4316
As an ENERGY STAR® Partner, Magnavox has determined that this product meets the ENERGY STAR® guidelines for ener-
gy efficiency. ENERGY STAR® is a U.S. registered mark. Using products with the ENERGY STAR® label can save energy.
Saving energy reduces air pollution and lowers utility bills.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Copyright 2002 Magnavox. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Table of Contents
General Inform ation
Disc Features
Safety and General Information . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . .4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Playable Discs and Videotapes . . . . . . . . . . . . . . . . .6
Disc Menus, Title Menus (DVDs) . . . . . . . . . . . . .48
Fast Forward/Reverse Search (Discs) . . . . . . . . . .49
Specific Title/Chapter Playback (DVDs) . . . . . . . .50
Specific Time Playback (Discs) . . . . . . . . . . . . . . . .51
Specific Track Playback (Audio CDs) . . . . . . . . . .52
Paused/Step-by-Step Playback, Resume (Discs) . . .53
Repeat, A-B Repeat (Discs) . . . . . . . . . . . . . . . . . .54
Markers (Discs) . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Subtitles, Camera Angles (DVDs) . . . . . . . . . . . . .56
Slow Motion, Zoom (DVDs) . . . . . . . . . . . . . . . . .57
Parental Controls Password (DVDs) . . . . . . . . . .58
Parental Controls Levels (DVDs) . . . . . . . . . . . . .59
Audio Language, Stereo Sound Mode (Discs) . . . .60
Random Playback, Programs (Audio CDs) . . . . . .61
MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
MP3 Display Information, Track Selection . . . . . .63
Random MP3 Playback, MP3 Programs . . . . . . . . .64
First-Tim e Setup and Use
Before Using the TV/VCR/DVD . . . . . . . . . . . . . . .7
Hooking Up the TV/VCR/DVD . . . . . . . . . . . . . .8-9
Optional Connections . . . . . . . . . . . . . . . . . . . . . .10
First-Time Setup, Watching TV . . . . . . . . . . . . . . .11
Playing a Videotape . . . . . . . . . . . . . . . . . . . . . . . .12
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Description of Controls
Remote Control Buttons . . . . . . . . . . . . . . . . .14-15
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
TV Settings
DVD Player Setup Features
Menu Language, Resetting TV Channels . . . . . . . .18
Adding/Deleting Channels . . . . . . . . . . . . . . . . . . .19
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . .20-22
Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . .23
Status Displays, Picture Controls . . . . . . . . . . . . .24
Audio Settings (DVD mode) . . . . . . . . . . . . . . . . .65
Language Settings (DVDs) . . . . . . . . . . . . . . . .66-67
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .68
On-Screen Displays (Discs) . . . . . . . . . . . . . . . . . .69
Black Level Settings, TruSurround Setting (Discs) 70
Recording
Inform ation You May Need
Recording (Videotapes) . . . . . . . . . . . . . . . . . . . . .25
One-Touch Recording (Videotapes) . . . . . . . . . . .26
Rerecording (Tape Duplication) . . . . . . . . . . . . . .27
Timer Recording (Videotapes) . . . . . . . . . . . . .28-30
Timer Recording Auto Return . . . . . . . . . . . . . . .31
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . .72-73
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . .75
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Videotape Features
Repeat Play (Videotapes) . . . . . . . . . . . . . . . . . . .32
Rental Playback (Videotapes) . . . . . . . . . . . . . . . . .33
Zero Return (Videotapes) . . . . . . . . . . . . . . . . . . .34
Time Search (Videotapes) . . . . . . . . . . . . . . . . . . .35
Index Search (Videotapes) . . . . . . . . . . . . . . . . . . .36
Videotape Playback Features . . . . . . . . . . . . . . . . .37
Automatic Operation Features (Videotapes) . . . .38
Additional TV Features
Closed Caption (TV/VCR) . . . . . . . . . . . . . . . . . .39
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Setting V-Chip (TV) . . . . . . . . . . . . . . . . . . . . .41-44
Multi-Channel Television Sound . . . . . . . . . . . .45-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction 5
W elcom e to your TV/VCR/DVD owner’s m anual.
This manual describes the 27MDTR10S and explains how to use all its features.
Features - TV/VCR
• Automatic Channel Setup
• Automatic Head Cleaner
• Automatic Tracking Adjustment
• Closed Caption
• One-Touch Recording
• Real-Time Tape Counter
• Rental Playback
• Repeat Play
• Daylight-Savings Time
• Sleep Timer
• English, Spanish, or French displays
• Forward/Reverse Searching; Still
• High Quality (HQ) System
• Index Search
• Timer Recording
• Time Search
• Zero Return
Features - Discs
• Audio Language choices*
• Bit Rate display
• Random Playback
(Audio CD, MP3)
• Camera Angle*
• Repeat (A-B, Chapter, Title, Track, Disc)
• Screen Saver
• Search (Title/Chapter, Time, Track)
• SRS TruSurround
• Subtitles*
• Zoom Playback
• Dolby Digital Sound*
• Dynamic Range Control
• Fast/Paused/Slow/Step-by-Step Playback
• Markers
• Parental Controls*
• Program Playback
(Audio CD, MP3)
* If available on the Disc
DVD Disc Menus...
Some explanations in this manual describe DVD Disc menus. DVD manufacturers set
the menus, which vary among DVDs. All DVDs do not have menus. If the DVD has a
menu, access it by pressing the DISC MENU button on the remote control.
Details are on page 48.
Setup Menus...
Some instructions explain how to use the setup menus of the TV/VCR/DVD. There are
two setup menus: one for the TV/VCR features while the unit is in TV/VCR mode, and
one for the Disc features while the unit is in DVD mode. Access the setup menus by
pressing SETUP on the remote control.
While in TV/VCR mode, you can select only the TV/VCR SETUP menu.
In DVD mode, you can select both the TV/VCR SETUP menu and the SETUP menu for
the unit’s DVD Player. Press the SETUP button once to select the TV/VCR SETUP
menu. Press SETUP twice to get to the DVD Player’s SETUP menu.
Even if you set a DVD feature in the unit’s SETUP menu, it will not be available if the
current Disc does not include that feature.
Available Disc Features...
All features described in this manual are not available on every Disc. If
the feature is not available on the Disc, you cannot use the
TV/VCR/DVD to make it available.
A stop hand with a cross-X (as shown here) will appear in the top right
corner of the screen if you try to access a feature that is not currently
available.
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Playable Discs and Videotapes
Playable Discs
The DVD Player of this TV/VCR/DVD will play many types of Discs, including Digital
Video Discs (DVDs) and Audio Compact Discs (CDs). It will play MP3 files as well.
To play a DVD, make sure it meets the requirements for Region Codes and Color
Systems as described below. Discs that have the following logos will play on the DVD
Player of this TV/VCR/DVD.
DVD: Prerecorded Digital
Video Discs
CD-R: Compact Disc
Recordable. CD-Rs can be
recorded on only once.
Recordable
Audio CDs
DVD-R: DVD Recordable.
DVD-Rs can be recorded on
only once.
MP3: Digital audio files
recorded on a CD-R or
CD-RW
DVD+RW: DVD Rewritable.
DVD+RWs can be recorded
on multiple times.
CD-RW: Compact Disc
Rewritable. CD-RWs can be
recorded on multiple times.
ReWritable
Region Codes
This TV/VCR/DVD has a Region One (1) DVD Player. DVDs must be labeled for ALL
regions or for Region 1 in order to play on the unit. You cannot play DVDs that are
labeled for other regions. Look for the symbols below on your DVDs. If these region
symbols do not appear on your DVD, you cannot play the DVD in this TV/VCR/DVD.
The number inside the globe refers to a region of the world. Region 1 represents the
United States, Canada, upper regions of North America, Bermuda, the U.S. Virgin
Islands, and small regions near Australia.
A DVD labelled for a specific region can only play on DVD Players with the same
region code.
Color System s
DVDs are recorded in different color systems throughout the world. The most com-
mon color systems are NTSC (which is used primarily in the United States and
North America), PAL, and SECAM.
The DVD Player of this unit uses NTSC, so DVDs you play must be recorded in the
NTSC system. You cannot play DVDs recorded in other formats. The color system
of the DVD may be listed on the DVD or on the Disc case.
Playable Videotapes
Magnavox recommends you use only videotapes that have the
mark. Other
videotapes may have poor picture quality and cause excessive deposits on the video
heads. The warranty may not cover such damage.
The VCR of this TV/VCR/DVD has a High Quality (HQ) system and is compatible
with existing Video Home System (VHS) equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using the TV/VCR/DVD 7
Rem ote Control Battery Installation
Rem ove the battery com partm ent lid on the
bottom of the remote control. Slide the lid down and
off. Follow the direction of the arrow on the lid.
1
2
3
Place two AA batteries inside the battery com -
partm ent. Align the and ends as indicated.
+
–
Replace the battery com partm ent lid.
1 2 3
Battery Safety
Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury, property damage, or damage to
the unit:
G Install ALL batteries correctly, with the + and - markings
on the battery aligned as indicated on the unit;
G Do not mix batteries, for example, old with new or carbon
with alkaline; and
G Remove batteries when the unit will not be used for a long
time.
Recording Prevention
Videotapes have record tabs to ensure you do not erase
recordings accidentally.
To prevent accidental recording, break off the
tab with a screwdriver.
1
To record again, cover the hole with cello-
phane tape.
2
1 2
Using the Rem ote Control
G Point the remote control at the TV/VCR/DVD’s remote
sensor. Details are on page 16.
Helpful Hint
G Do not put objects between the remote control and the
TV/VCR/DVD.
• Your new product, its packaging,
and this manual contain materials
that can be recycled and reused.
Specialized companies can recycle
your product to increase the
amount of reusable materials and
to minimize the amount that
needs to be properly disposed.
Your product uses batteries that
should not be thrown away when
depleted but should be disposed
of as small chemical waste.
Please find out about the local
regulations on disposal of your old
product, batteries, manual, and
packaging when you replace exist-
ing equipment.
TV/VCR/DVD Maintenance
G Remove any light adhesive stick-on notes from the video
cassette before putting the cassette in the TV/VCR/DVD.
Removable labels can jam the TV/VCR/DVD.
G The TV/VCR/DVD requires periodic maintenance to main-
tain its excellent performance. This TV/VCR/DVD has an
automatic head cleaning system. However, the video heads
will eventually require cleaning or replacement. Only an
authorized service center should perform this service.
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Hooking Up the TV/VCR/DVD
Hook up your TV/VCR/DVD using
one of the connections shown.
1
Connect a Cable TV
signal or an antenna to
the ANT(enna) Jack.
Hooking Up Your TV/VCR/DVD
with a Cable TV Signal or
A
O utdoor Antenna
ANT.
ANT.
Hooking Up Your TV/VCR/DVD
with a Cable Box/Satellite Receiver
To view any channel, set the TV/VCR/DVD to
the output channel (channel 03 or 04) of the
Cable Box/Satellite Receiver. Then, select chan-
nels at the Cable Box/Satellite Receiver.
Connect the Cable TV
or Satellite signal to the
IN Jack on the Cable
Box/Satellite Receiver.
B
IN
OUT
Connect an RF
coaxial cable
(not supplied) to
the OUT Jack
on the Cable
Box/ Satellite
Receiver and to
the ANT(enna)
Jack on the
TV/VCR/DVD.
ANT.
ANT.
Your Cable Box/Satellite Receiver may have Audio and Video Out jacks instead of the single
Antenna Out jack (RF coaxial or 75 ohm) shown here.
If so, connect Audio and Video cables to the Audio/Video Out jacks of the Cable Box/Satellite
Receiver and to the AUDIO/VIDEO In jacks on the front of the TV/VCR/DVD.
Set the TV/VCR/DVD to AUX (channel 00), not channel 3 or 4. Select channels you want to
watch or record at the Cable Box/Satellite Receiver as usual, leaving the TV/VCR/DVD on AUX.
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the TV/VCR/DVD (cont’d) 9
Hooking Up Your TV/VCR/DVD
Indoor Antenna
(not supplied,
example only)
with an Indoor Antenna
C
D
To install an indoor antenna or “rabbit ears”
(not supplied), connect the antenna wire to the
ANT(enna) Jack on the back of the
TV/VCR/DVD as shown. Extend the antenna
and adjust its length, direction, and angle for
the clearest picture.
ANT.
ANT.
Hooking Up Your TV/VCR/DVD to
Another Video Source
(VCR, DVD Player, Cam corder, etc.)
You may need this connection if you want to
play Discs or tapes on other equipment but
watch them on the TV/VCR/DVD. Select chan-
nel 00 (AUX) at the TV/VCR/DVD when view-
ing materials playing on other equipment. More
details are on page 27.
Audio and video cables are not supplied.
AUDIO/VIDEO OUT
Connect audio cables to the
Jacks on VCR
(example only)
AUDIO OUT Jacks on the
VCR and to the red and
white AUDIO In Jacks on the
front of the TV/VCR/DVD.
HEADPHONE VIDEO
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
IN
L
R
L
AUDIO
R
D
V
D
V
C
R
POWER
O
U
T
P
U
T
VOLUME
SKIP/REW
PLAY
FWD/SKIP
STOP
OPEN/CLOSE
CHANNEL
REC/OTR
REW
PLAY
F.FWD
STOP/EJECT
H
E
A
D
P
H
O
N
E
V
I
D
E
O
L
AUDIO
R
SEARCH
D
V
D
V
C
R
/
T
V
AUDIO/VIDEO In
Jacks on front of
TV/VCR/DVD
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
L
R
IN
Connect a Video cable to the
VIDEO OUT Jack on the VCR
and to the yellow VIDEO In Jack
on the front of the TV/VCR/DVD.
W hen all other connections are
com plete, plug in the
2
3
TV/VCR/DVD’s power cord.
Before you turn on the
TV/VCR/DVD, go to page 11.
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Optional Connections
Analog Stereo Hookups
If you want to hear the TV/VCR/DVD sound
through a stereo instead, make this connection.
Audio cables
to red and
white AUDIO
OUT jacks on
TV/VCR/DVD
Com plete the antenna/Cable TV
connections. Details are on pages eight-
nine.
1
2
ANT.
L
AUDIO OUT
R
COAXIAL
Connect red and white audio
cables to the red and white AUDIO
O UT jacks on the back of the
TV/VCR/DVD and to the AUDIO
IN jacks on the stereo. Match the
cable colors to the jack colors. Audio
cables are not supplied. Use RCA-style
cables.
L
AUDIO OUT
R
COAXIAL
Set your stereo to Auxiliary In. See
your stereo owner’s manual for details.
Audio cables to
Stereo’s AUDIO IN jacks
3
Digital Stereo Hookups
You can connect the TV/VCR/DVD to a Stereo
that has a Digital Coaxial In jack. Use this
hookup if you want to hear the TV/VCR/DVD
sound through the Stereo instead. Use these
connections for a Dolby Digital-compatible
Stereo or for a Receiver that has a Mini-Disc
or Digital Audio Tape deck.
To orange
COAXIAL jack
on TV/VCR/DVD
ANT.
L
AUDIO OUT
R
COAXIAL
Connect the antenna/Cable TV
signal. Details are on pages eight-nine.
L
1
2
AUDIO OUT
R
Connect a digital audio coaxial
cable (not supplied) to the orange
CO AXIAL jack on the
TV/VCR/DVD.
Also connect the cable to the
Stereo’s CO AXIAL DIGITAL
AUDIO IN jack.
COAXIAL
To Stereo’s COAXIAL
DIGITAL AUDIO IN jack
If the Stereo is Dolby Digital-com -
patible, set DO LBY DIGITAL to
O N. If the Stereo is not Dolby Digital-
3
Helpful Hints
• You cannot use a Mini-Disc or
Digital Audio Tape deck to copy
5.1 channel Dolby Digital sur-
round sound Discs.
compatible or if you connected to a
Mini-Disc or Digital Audio Tape Deck,
set DOLBY DIGITAL to OFF. Details are
on page 65.
An incorrect setting causes noise distor-
tion and damages speakers.
To see if your Stereo has Dolby Digital,
look for a Dolby Digital logo on your
Stereo. Or, refer to the Stereo owner’s
manual.
• Discs recorded in Dolby Digital
should show this on the Disc or
case. If the Disc is not recorded
in 5.1 channel Dolby Digital sur-
round sound, you will not hear
multi-channel sound even if you
use the Digital Stereo hookup.
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Setup, Watching TV 11
The TV/VCR/DVD can memorize available TV channels. If
you are using a Cable Box or Satellite Receiver, you do not
need to set channels at the TV/VCR/DVD. Set the
TV/VCR/DVD to the output channel of the Cable Box or
Satellite Receiver (channel 03 or 04). Then select channels at
the Cable Box or Satellite Receiver.
POWER PICTURE SLEEP SELECT
1
1
4
7
2
5
8
0
3
6
CH.
Press PO W ER to turn on the TV/VCR/DVD. The
4
5
red VCR/TV light will appear on the front of the
TV/VCR/DVD.
9
+100
1
2
VOL.
+10
SPEED C.RESET
ZOOM
MUTE
Press s or B to select ENGLISH (ENG),
ESPANO L (ESP), or FRANCAIS (FRA). The
selected language will appear inside the [ ]. This will
be the language of the TV/VCR/DVD setup menus.
PLAY
STOP
DISC
MENU
RECORD
2-3
– SET UP –
DISPLAY
SETUP
B LANGUAGE
ENGLISH
ENTER
[
]
ESP
FRA
TITLE
RETURN
REPEAT
AUTO PRESET
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
Press G or G to select AUTO PRESET. Then
press B. The TV/VCR/DVD scans and memorizes
active channels in your area.
When scanning is complete, the TV/VCR/DVD will go
to the lowest available channel automatically.
3
4
5
– SET UP –
LANGUAGE
ENGLISH
[
]
ESP
FRA
B AUTO PRESET
To watch TV, press the CH. G/G buttons to
select memorized channels. Memorized channels are
those that appear automatically when you flip through
channels. If a channel is skipped, you still can use the
Number buttons to select it. This is a non-memorized
channel; it may have weak reception in your area.
Remember, if you are using a Cable Box/Satellite
Receiver, set the TV/VCR/DVD to channel 3 or 4 or
AUX. Change channels at the Cable Box/Satellite
Receiver.
Helpful Hints
• You may not see these menus
when you turn on the
TV/VCR/DVD. Set channels and
the menu language later. Details
are on page 18.
• To select Cable TV channels
higher than 99, press the
+100/+10 button, then press
the Number buttons for the last
two digits. For example, to select
channel 125, press +100/+10,
2, 5.
Press VO L. G/G to adjust the volum e.
Precede single-digit channel num-
bers with a zero (for example,
01 ... 09).
VOLUME 20
CCCCCCCCCCCCC
CCC
• Pressing CH. G/G in DVD
mode will return the unit to
TV/VCR mode.
• If you turn off the unit in DVD
mode, when you turn it on again,
it will be in TV/VCR mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Playing a Videotape
Follow these steps to simply play a videotape. Videotape play-
back options are on pages 32-38.
Insert a videotape in the cassette com partm ent
of the TV/VCR/DVD. The power will come on. If
POWER PICTURE SLEEP SELECT
1
the tape’s record tab is missing, playback should start
automatically.
1
4
7
2
5
8
0
3
6
CH.
If playback does not start autom atically, press
PLAY B to start playback.
9
+100
VOL.
2
+10
ZOOM
SPEED C.RESET
MUTE
Press STO P C to stop playback.
2
3
3
PLAY
STOP
4
Press j / h to rewind the tape.
DISC
MENU
RECORD
4
DISPLAY
SETUP
ENTER
W hen the tape finishes rewinding, press
STO P/EJECT on the front of the TV/VCR/DVD
to rem ove the tape.
TITLE
RETURN
REPEAT
5
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
Helpful Hints
• If the tape you want to play is
already in the TV/VCR/DVD, turn
on the TV/VCR/DVD power.
Press SELECT to make sure it is
in TV/VCR mode, then press
PLAY B.
• When you play an S-VHS format
tape, you cannot get the high
resolution that would be avail-
able on an S-VHS VCR. Noise
lines (black and white streaks)
may appear in the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Disc 13
Before you begin, turn on the power of other equipment con-
nected to the TV/VCR/DVD. Set a stereo (if applicable) to the
correct sound source or channel. Details are on page 10.
POWER PICTURE SLEEP SELECT
Press POW ER to turn on the TV/VCR/DVD.
The unit will be in TV/VCR mode. The red VCR/TV
light will be on.
1
2
1
2
3
4
1
4
7
2
5
8
0
3
6
CH.
Press SELECT so the green DVD light appears
on the front of the TV/VCR/DVD. This puts the
TV/VCR/DVD in DVD mode.
9
+100
VOL.
+10
ZOOM
SPEED C.RESET
MUTE
Press OPEN/CLOSE A on the front of the
TV/VCR/DVD to open the Disc tray.
5
6
PLAY
STOP
DISC
MENU
RECORD
Place a Disc into the tray.
Some DVDs are recorded on both sides. Make sure the
label of the side you want to play is facing up. Or, if the
DVD is recorded on only one side, place the Disc in
the tray with the label facing up.
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
Press PLAY B. The tray will close automatically.
Playback will begin at the first Chapter or Track of the
Disc.
Or, press OPEN/CLOSE A or press the tray toward
the TV/VCR/DVD to close the tray. Playback will start
automatically.
5
Press OPEN/CLOSE A
on front of the
TV/VCR/DVD.
3
4
If a DVD Disc menu appears instead, see page 48.
With some Audio CDs, playback will not begin unless
you press PLAY B.
Insert a Disc.
Press STOP C to stop playback. If Disc playback
remains stopped for five minutes, a screen saver will
appear on the screen.
6
Helpful Hints
• A stop hand with a cross-X
may appear on the screen when
you try to access a feature that is
not currently available. This is not
a problem with the TV/VCR/DVD.
• If a Disc is dirty or scratched, the
picture may be distorted or play-
back may stop. Remove the Disc
and try a different one.
• Press OPEN/CLOSE A or PLAY
(DVD) on the front of the
TV/VCR/DVD when the power is
off. This turns on the unit in DVD
mode (instead of the usual
Remember, only certain Discs will play.
See page 6 for details.
TV/VCR mode).
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Remote Control Buttons
PICTURE Button
Press to access the picture con-
trols. Details are on page 24.
SLEEP Button
Press to set the Sleep Timer.
Details are on page 40.
POW ER Button
Press to turn on or off the
TV/VCR/DVD.
SELECT Button
Press to choose TV/VCR or
DVD mode. The corresponding
light will appear on the front of
the TV/VCR/DVD to indicate
which mode is active. Details are
on page 16.
POWER PICTURE SLEEP SELECT
Num ber Buttons
TV Mode: Press two digits to
access a specific channel. Press 0
before the number of a single
digit channel.
1
4
7
2
5
8
0
3
6
CH.
PLAY B Button
9
+100
Details are on page 11.
Press to start playing a Disc or
video cassette. Details are on
pages 12-13.
VOL.
+100/+10 button: To select
channels 100 or higher, press
+100/+10, then the Number but-
tons of the last two digits of the
channel number.
DVD Mode: Use the Number
buttons to enter a Track or
Chapter number.
+10
SPEED C.RESET
ZOOM
MUTE
G / gButton
PLAY
STOP
During Disc playback, press
briefly to skip to the next Track
or Chapter. Details are on pages
50 and 52.
DISC
MENU
RECORD
+100/+10 button: Press before
entering double-digit numbers.
For example, to select Chapter
16, press +100/+10, then 1, 6.
Or, press and hold for two sec-
onds to search forward during
Disc playback. Details are on page
49.
During videotape playback, press
to search forward. Details are on
page 37. Or, press when play-
back is stopped to fast forward a
videotape.
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
k (pause) Button
Press to pause videotape record-
ing. Press again to resume
recording. Details are on page 25.
Press to pause videotape or
DVD playback. Press repeatedly
to advance the picture one frame
at a time. Details are on pages 37
and 53.
STOP C Button
Press to stop Disc or videotape
playback.
Arrow Buttons
Use the Arrow buttons to select
or adjust menu items.
RECORD Button
Press once to start a recording.
Details are on page 25.
RETURN Button
DISPLAY Button
Press to go to the previous
Setup menu in DVD mode. Press
to remove some menus or dis-
plays.
TV/VCR Mode: Press to see
the tape counter, channel, or
time on the screen. Details are on
page 24.
DVD Mode: Press to see the
Disc status on the screen. Details
are on page 69.
REPEAT Button
Press to play a Disc, Title,
Chapter, or Track repeatedly.
Details are on page 54.
TITLE Button
Press to access a DVD’s Title
menu if available. Details are on
page 48.
ENTER Button
Press to accept or confirm a
menu setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Buttons (cont’d) 15
ZOOM Button
CH. (channel) G/G Buttons
Press to select memorized TV
channels.
Press to enlarge the picture dur-
ing DVD playback. Details are on
page 57.
Details are on pages 18-19.
C.RESET (counter reset)
Button
Press to reset the tape counter
to 0:00:00. Details are on page 34.
Press to cancel a timer record-
ing. Details are on page 30.
VOL. (volum e) G/G Buttons
Press to adjust the volume.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
MUTE Button
Press to mute or restore the
sound.
CH.
SPEED Button
9
+100
Press to choose a tape recording
speed (SP or SLP). Details are on
page 25.
VOL.
+10
SPEED C.RESET
ZOOM
DISC MENU Button
Press to access DVD Disc
menus. Details are on page 48.
MUTE
j / h Button
During Disc playback, press
briefly to skip to the beginning of
the current Track/Chapter. Press
repeatedly to skip to previous
Tracks/Chapters. Details are on
pages 50 and 52.
Or, press and hold for two sec-
onds to search backward during
Disc playback. Details are on page
49.
PLAY
STOP
DISC
MENU
RECORD
DISPLAY
SETUP
ENTER
REPEAT A-B Button
Press to set a section of a Disc
to play repeatedly. Details are on
page 54.
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
During videotape playback, press
to search backward. Details are
on page 37. Or, press when play-
back is stopped to quickly
rewind the tape.
ANGLE Button
Press to change the camera angle
and watch a sequence from a dif-
ferent perspective. Details are on
page 56.
SETUP Button
Press to access or remove a
menu.
SUBTITLE Button
Press to select a subtitle lan-
guage. Details are on page 56.
CLEAR Button
Press to reset or erase a setting
or wrong information.
AUDIO Button
Press to select an audio language
or sound mode. Details are on
page 60.
MODE Button
Press to play a Program or to
start Random playback. Details
are on page 61.
SEARCH MODE Button
Press to find a specific time,
Chapter, Track, or Title on a
Disc. Details are on pages 50-52.
Press to set up Markers. Details
are on page 55.
Download from Www.Somanuals.com. All Manuals Search And Download.
16 Front Panel
Cassette Com partm ent
Insert a videotape here.
Disc tray
Insert a Disc here.
CHANNEL G/G Buttons
Press to select TV channels.
Details are on page 11.
O PEN/CLO SE A Button (DVD)
Press to open or close the disc tray.
Details are on page 13.
D
V
D
V
C
R
POWER
SELECT
VOLUME
SKIP/REW
PLAY
FWD/SKIP
STOP
OPEN/CLOSE
CHANNEL
REC/OTR
REW
PLAY
F.FWD
STOP/EJECT
H
E
A
D
P
H
O
N
E
V
I
D
E
O
L
AUDIO
R
SEARCH
D
V
D
TV/VCR
STO P C Button (DVD)
Press to stop Disc playback.
Details are on page 13.
VO LUME G/G Buttons
Press to adjust the volume.
D V D
V C R
OUTPUT
POWER
CHANNEL
VOLUME
SKIP/REW
PLAY
FWD/SKIP
STOP
OPEN/CLOSE
REC/OTR
REW
PLAY
F.FWD
STOP/EJECT
HEADPHONE VIDEO
L
AUDIO
R
SEARCH
D V D
VCR/TV
STOP/EJECT C A
PO W ER Button
Button (VCR)
Press to turn the TV/VCR/DVD on
or off. Turn off the TV/VCR/DVD
for a timer recording.
Press to stop tape playback.
Press while play is stopped
to remove the tape.
PLAY B Button (DVD)
Press to start Disc playback.
Details are on page 13.
F.FW D i Button
(VCR)
Press to fast forward the
tape or to search forward
quickly during playback.
Details are on page 37.
SKIP/REW H,
FW D/SKIP i Buttons (DVD)
Press to go to a different Chapter or
Track. Details are on page 50.
PLAY B Button (VCR)
Press to start tape play-
back. Details are on page 12.
DVD light (green)
Appears if the TV/VCR/DVD is in
DVD mode.
VIDEO and AUDIO L/R
(left/right) In jacks Use
audio and video cables to
connect these jacks to the
Audio and Video Out jacks
of a Camcorder, DVD
Player, or VCR. This lets
you watch materials playing
on the other equipment
when you choose AUX
(channel 00) at the
O UTPUT Button
Press to select TV/VCR or DVD
mode. If you switch to TV/VCR
mode, wait about 4 seconds before
switching back to DVD mode.
VCR/TV light (red)
Appears if the TV/VCR/DVD is in
TV/VCR mode.
REC/O TR light (red)
This light flashes during recording. It
lights when the TV/VCR/DVD is in
Standby mode (power off) for a
timer recording.
TV/VCR/DVD. Details are
on page nine and 27.
HEADPHONE jack
Connect headphones (not
supplied) here for personal
listening.
REC/O TR Button (VCR)
Press to start a videotape recording.
Details are on pages 25-26.
Rem ote Sensor
REW H Button (VCR)
Receives a signal from your
remote control so you can
operate the TV/VCR/DVD
from a distance.
Press to rewind the tape or to
search backward quickly during play-
back. Details are on page 37.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel 17
L
AUDIO OUT
R
ANT.
COAXIAL
ANT. Jack
(Antenna In)
Connect an antenna or Cable TV signal here. This brings TV
channels to the TV/VCR/DVD. If you do not connect an antenna
or Cable TV signal to the TV/VCR/DVD (or connect to a Cable
Box/Satellite Receiver through this jack), you will not receive
any TV channels. Details are on page 8.
Power Cord
Connect to a standard AC outlet (120V/60Hz).
CO AXIAL Jack
(Digital Audio O ut) (orange)
Connect this jack to a Digital Stereo using a digital audio coaxial
cable (not supplied). Use this connection if the Stereo has Dolby
Digital compatibility and has a Digital Coaxial Audio In jack. You
may also use this connection when connecting the
TV/VCR/DVD to a Mini-Disc or Digital Audio Tape deck. Details
are on page 10.
AUDIO O UT L/R jacks
(Audio O ut, left and right, white and red)
Connect these jacks to an analog Stereo. The Stereo will have
right and left Audio In jacks. This means it receives and sends
sound through two channels, the right and the left. These jacks
are usually red and white on the Stereo.
Details are on page 10.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 Menu Language, Resetting TV Channels
Menu Language
This affects the language of the TV/VCR/DVD’s setup menus
POWER PICTURE SLEEP SELECT
and on-screen display terms. It does not alter the language of
TV programming, videotapes, Discs, or closed captioning.
G Before you begin, put the TV/VCR/DVD in TV/VCR mode.
Press SELECT so the red VCR/TV light appears on the
front of the TV/VCR/DVD.
1
4
7
2
5
8
0
3
6
CH.
9
+100
VOL.
+10
ZOOM
Press SETUP.
SPEED C.RESET
MUTE
1
2
PLAY
STOP
Press G or G to select LANGUAGE.
– TV/VCR SETUP –
DISC
RECORD
MENU
2-3
1,4
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
Press s or B to select ENGLISH (ENG),
ESPANO L (ESP), or FRANCAIS (FRA). The
selected language will appear inside the [ ]. This will
be the language of the TV/VCR/DVD setup menus.
3
POWER PICTURE SLEEP SELECT
Press SETUP to rem ove the m enu.
4
1
4
7
2
5
8
0
3
6
CH.
Resetting TV Channels
The TV/VCR/DVD may memorize channels when you turn it
on the first time. You may reset channels with these steps.
G Before you begin, put the TV/VCR/DVD in TV/VCR mode.
Press SELECT so the red VCR/TV light appears on the
front of the TV/VCR/DVD.
9
+100
VOL.
+10
ZOOM
SPEED C.RESET
MUTE
PLAY
STOP
Press SETUP. Press G or G to select CHAN-
NEL SET UP. Then, press B.
1-2
1
DISC
MENU
RECORD
1
– TV/VCR SETUP –
DISPLAY
SETUP
ENTER
TIMER PROGRAMMING
SETTING CLOCK
B CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
TITLE
RETURN
Helpful Hints
• If you accidentally select Spanish
or French, press SETUP. Press
or to select IDIOMA or LAN-
K
L
GAGE. Press s or B to select
ENGLISH. Then, press SETUP.
• The TV/VCR/DVD cannot change
channels at the Cable Box or
Satellite Receiver. Set the
TV/VCR/DVD to channel 3 or 4
or AUX. Change channels at the
Cable Box/Satellite Receiver.
Details are on page eight.
Press G or G to select AUTO PRESET. Press
B. The TV/VCR/DVD memorizes available channels.
2
When scanning is complete, the TV/VCR/DVD will go
to the lowest available channel automatically.
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
B AUTO PRESET
• If the power fails, you may have
to reset the TV channels.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding/Deleting Channels 19
You can delete TV channels you no longer receive or seldom
watch. Or, you can add more channels if the TV/VCR/DVD
did not memorize all your favorite channels.
G Before you begin, press SELECT to put the
TV/VCR/DVD in TV/VCR m ode. The red VCR/TV
light will appear.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
Press SETUP.
9
+100
1
2
VOL.
+10
Press G or G to select CHANNEL SET UP.
SPEED C.RESET
ZOOM
MUTE
Then, press B.
– TV/VCR SETUP –
PLAY
STOP
TIMER PROGRAMMING
SETTING CLOCK
B CHANNEL SET UP
USER’S SET UP
DISC
MENU
RECORD
2-5
1,6
DISPLAY
SETUP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
INDEX SEARCH
A-B
AUDIO SUBTITLE ANGLE
MODE
Press G or G to select ADD/DELETE CH. (TV)
or (CATV) will appear beside ADD/DELETE CH. This
indicates whether you connected an Antenna (TV) or
a Cable TV signal (CATV) to the TV/VCR/DVD.
Then, press B. The menu will disappear and a TV
channel will appear. The channel number will appear,
along with ADD/DELETE.
3
– CHANNEL SET UP –
B ADD / DELETE CH (CATV)
AUTO PRESET
Press G or G until the channel you wish to add
or delete appears. You also can use the Number
buttons or the CH. G/G buttons to choose a channel.
4
Helpful Hints
08
ADD / DELETE
• To confirm that a channel has
been added or deleted, press the
CH. G/G buttons to see if you
can or cannot select the channel.
Only memorized/added channels
can be selected with CH. G/G.
Use the Number buttons to
Press s or B to add or delete the channel. To
add a channel, press s or B so ADD and the channel
number appear in light blue (teal). To delete a channel,
press s or B so DELETE and the channel number
appear in light red (purple).
5
select deleted channels.
To delete another channel, repeat steps 4-5.
• If you connected an Antenna to
the TV/VCR/DVD, channels 2-69
will be available to add or delete.
If you connected to Cable TV,
channels 1-125 will be available.
Press SETUP when you are finished.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
20 Setting the Clock
Manual Clock Setting
You must set the TV/VCR/DVD clock before you can do a
timer recording. Set the clock manually when first setting up
the TV/VCR/DVD. Afterward, Auto Clock will correct the
time automatically if necessary.
POWER PICTURE SLEEP SELECT
If you do not receive a PBS station that carries time signals,
you cannot use Auto Clock. Use manual clock setting. Set
AUTO CLOCK to OFF. The TV/VCR/DVD will not update
the time. The time will remain as you set it.
1
4
7
2
5
8
0
3
6
CH.
9
+100
VOL.
+10
ZOOM
Before you begin ...
G Turn on the TV/VCR/DVD power.
SPEED C.RESET
MUTE
G Connect the Antenna/Cable TV signal correctly.
Details are on pages eight-nine.
PLAY
STOP
G Turn on the Cable Box/Satellite Receiver (if applicable).
G Set the TV channels. Details are on pages 18-19.
G Press SELECT to put the TV/VCR/DVD in TV/VCR
m ode. The red VCR/TV light will appear.
DISC
RECORD
MENU
2-4
1
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
Press SETUP.
A-B
AUDIO SUBTITLE ANGLE
MODE
1
2
Press G or G to select SETTING CLO CK.
Then, press B.
– TV/VCR SETUP –
TIMER PROGRAMMING
B SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
Press G or G to select MANUAL CLO CK SET.
Then, press B.
3
– SETTING CLOCK –
AUTO CLOCK
[ON]
AUTO CLOCK CH [AUTO]
MANUAL CLOCK SET
B
D.S.T.
[OFF]
W hile the MO NTH space is flashing, press G or
G until your desired m onth appears. (Example:
May → 05) Then, press B.
4
– MANUAL CLOCK SET–
MONTH DAY
0 5 – – – – – – – – –
HOUR MINUTE
– – – – – –
YEAR
/
:
Helpful Hint
• If the power fails, you may have
to reset the clock.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock (cont’d) 21
W hile the DAY space is flashing, press G or G
until your desired day appears. (Example: 7th →
07) Then, press B. An abbreviation for the selected
day of the week will appear automatically.
5
POWER PICTURE SLEEP SELECT
– MANUAL CLOCK SET–
1
4
7
2
5
8
0
3
6
CH.
MONTH DAY
0 5 0 7 – – – – – – –
HOUR MINUTE
– – – – – –
YEAR
/
9
+100
VOL.
+10
:
SPEED C.RESET
ZOOM
MUTE
W hile the YEAR space is flashing, press G or G
until your desired year appears. (Example: 2002)
Then, press B.
PLAY
STOP
6
7
8
9
DISC
RECORD
MENU
– MANUAL CLOCK SET–
5-8
9
DISPLAY
SETUP
MONTH DAY
0 5 0 7 TUE 2 0 0 2
HOUR MINUTE
– – – – – –
YEAR
ENTER
TITLE
RETURN
REPEAT
/
CLEAR SEARCH MODE REPEAT
A-B
:
AUDIO SUBTITLE ANGLE
MODE
W hile the HO UR space and AM or PM are
flashing, press G or G until your desired hour
appears. (Example: 05 PM) Then, press B.
– MANUAL CLOCK SET–
MONTH DAY
0 5 0 7 TUE 2 0 0 2
HOUR MINUTE
0 5 – – P M
YEAR
/
:
W hile the MINUTE space is flashing, press G
or G until the desired m inute appears.
(Example: 40)
– MANUAL CLOCK SET–
MONTH DAY
0 5 0 7 TUE 2 0 0 2
HOUR MINUTE
0 5 4 0 P M
YEAR
/
:
Press SETUP. Although seconds are not displayed,
they begin counting from 00 when you press SETUP.
Use this action to synchronize the clock with the cor-
rect time if desired.
5:40 PM
Helpful Hint
• To adjust the clock later, follow
steps 1-3 on page 20. Then,
press s or B to select the item
you want to change. Enter the
correct information by pressing
G or G. Press SETUP when you
are finished.
Press DISPLAY repeatedly
in TV/VCR mode to see the
current time on the screen.
Details are on page 24.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 Setting the Clock (cont’d)
Auto Clock Setting
You can have the TV/VCR/DVD set the clock automatically
using your PBS channel. Once you set the clock, the
TV/VCR/DVD will automatically monitor the correct time
and date broadcast by the PBS station.
POWER PICTURE SLEEP SELECT
6
1
4
7
2
5
8
0
3
6
CH.
Before you begin ...
G Turn on the TV/VCR/DVD power.
G Connect the antenna/Cable TV signal.
Details are on pages eight-nine.
9
+100
VOL.
+10
SPEED C.RESET
ZOOM
MUTE
G Turn on the Cable Box/Satellite Receiver (if applicable).
G Set up the TV channels. Details are on pages 18-19.
G Press SELECT to put the TV/VCR/DVD in TV/VCR
m ode. The red VCR/TV light will appear.
PLAY
STOP
DISC
RECORD
MENU
2-4
1,5
DISPLAY
SETUP
ENTER
Press SETUP.
TITLE
RETURN
REPEAT
1
2
CLEAR SEARCH MODE REPEAT
A-B
Press G or G to select SETTING CLO CK.
AUDIO SUBTITLE ANGLE
MODE
Press B.
– TV/VCR SETUP –
TIMER PROGRAMMING
B SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
W ith AUTO CLO CK selected, press B repeat-
edly so [O N] appears beside AUTO CLO CK.
3
– SETTING CLOCK –
B
AUTO CLOCK
[ON]
AUTO CLOCK CH [AUTO]
MANUAL CLOCK SET
D.S.T.
[OFF]
Press G to select AUTO CLO CK CH. Then
press s or B until your PBS channel number
appears beside AUTO CLOCK CH.
Choose AUTO if you want the TV/VCR/DVD to
choose a PBS station for you.
4
– SETTING CLOCK –
AUTO CLOCK
[ON]
45]
B
AUTO CLOCK CH
[
MANUAL CLOCK SET
D.S.T. [OFF]
Helpful Hints
• You must use the TV/VCR/DVD
remote control to set the clock.
• If there are no stations in your
area with the Auto Clock signal,
Auto Clock setting is not possible.
Use Manual Clock Setting. Details
are on pages 20-21.
Press SETUP to rem ove the m enus.
5
6
Press PO W ER to turn off the TV/VCR/DVD
and let the PBS channel update the clock. This
may take from 10 minutes to an hour. When you turn
on the unit again, the clock will be set.
Download from Www.Somanuals.com. All Manuals Search And Download.
Daylight-Savings Time 23
When Daylight-Savings Time (D.S.T.) is ON, the
TV/VCR/DVD clock will automatically move forward one
hour on the first Sunday in April and move back one hour on
the last Sunday in October.
POWER PICTURE SLEEP SELECT
To turn Daylight-Savings Time ON or OFF, follow the steps
below.
G Before you begin, press SELECT to put the
TV/VCR/DVD in TV/VCR m ode. The red VCR/TV
light will appear.
1
4
7
2
5
8
0
3
6
CH.
9
+100
VOL.
+10
ZOOM
Press SETUP.
SPEED C.RESET
MUTE
1
2
PLAY
STOP
Press G or G to select SETTING CLO CK.
Then, press B.
DISC
RECORD
MENU
2-3
1,4
– TV/VCR SETUP –
DISPLAY
SETUP
ENTER
TIMER PROGRAMMING
B SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
Press G or G to select D.S.T. Then press
until [O N] or [O FF] appears.
B
3
4
– SETTING CLOCK –
AUTO CLOCK
[ON]
AUTO CLOCK CH [AUTO]
MANUAL CLOCK SET
B
D.S.T.
[ON]
Press SETUP to rem ove the m enu.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 Status Displays, Picture Controls
Status Displays
To see the Tape Counter, Clock, or Channel number on the
screen in TV/VCR mode, press DISPLAY repeatedly. The fol-
lowing will occur when Closed Captions are OFF.
POWER PICTURE SLEEP SELECT
Press DISPLAY once to see the real-tim e tape
counter. After five seconds, only the counter will
remain on the screen. To clear it, press DISPLAY
twice.
1
4
7
2
5
8
0
3
6
CH.
1
9
+100
VOL.
STOP
+10
SPEED C.RESET
ZOOM
MUTE
PLAY
STOP
SP
COUNT 0:12:34
DISC
MENU
RECORD
DISPLAY
SETUP
O r, press DISPLAY twice to see the current
tim e and TV channel. After five seconds, only the
clock and channel number will remain on the screen.
To clear them, press DISPLAY once again.
ENTER
TITLE
RETURN
2
1-2
STOP
5:40PM
CH
2
SP
G When Closed Captions are ON, the status displays will
appear for only five seconds. Then all the information will
clear from the screen automatically. Closed Caption details
are on page 39.
Picture Controls
Follow these steps to adjust the TV/VCR/DVD’s brightness,
contrast, color, tint, and sharpness. (You cannot adjust the
Picture Controls during Audio CD playback.)
POWER PICTURE SLEEP SELECT
Press PICTURE.
1
4
7
2
5
8
0
3
6
CH.
1
1
2
9
+100
W ithin five seconds, press G or G to select the
picture control you want to adjust. You can
VOL.
+10
select BRIGHT, CONTRAST, COLOR, TINT, or
SHARPNESS.
SPEED C.RESET
ZOOM
MUTE
PLAY
STOP
DISC
MENU
RECORD
2-3
DISPLAY
SETUP
BRIGHT
PPPPPPPCPPPPPPP
ENTER
–
+
TITLE
RETURN
W ithin five seconds, press s or B to adjust the
picture control.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording (Videotapes) 25
Put a videotape in the
TV/VCR/DVD.
Place a tape with its record tab intact in the
cassette com partm ent of the TV/VCR/DVD.
The TV/VCR/DVD power will come on.
If the power is already on and a videotape is in the
unit, make sure the unit is in TV/VCR mode. Press
1
1
POWER PICTURE SLEEP SELECT
SELECT so the red VCR/TV light appears on the front
of the unit.
1
4
7
2
5
8
0
3
6
3
CH.
Press SPEED until the desired tape speed (SP
or SLP) appears in the bottom left corner of
the screen. See tape speed details below.
9
+100
VOL.
2
3
+10
ZOOM
SPEED C.RESET
MUTE
5
Press CH. G/G or the Num ber buttons to
select the channel you want to record.
You cannot change channels during recording. You
can only record and view one TV channel at a time.
2
6
PLAY
STOP
DISC
MENU
RECORD
DISPLAY
SETUP
ENTER
4-5
Press RECO RD once to start recording. The
REC/OTR light will flash on the front of the
TV/VCR/DVD. (If the tape does not have a record
tab, the tape will eject. Insert another tape.)
TITLE
RETURN
REPEAT
4
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
To pause the recording, press k. To resum e
recording, press k again or press RECO RD.
5
6
To stop recording, press STO P C .
Tape Speeds
This chart shows the recording/playback time for three types
of video cassettes (T160, T120, and T60). There are three
playback speeds: SP, LP, and SLP. A tape will play only in the
speed in which it was recorded. When recording, you can
change the tape speed using the SPEED button. You cannot
record in LP speed on this TV/VCR/DVD.
Helpful Hints
• You cannot record DVD contents
onto a videotape using this unit.
• Recording options are on pages
26-31.
The slower the speed, the more programming you can fit on
the tape. SLP is the slowest speed.
Cassette type / Playback Time
• If you pause a recording for five
minutes, the unit will start
Recording again automatically.
• You can change the tape speed
by pressing the SPEED button
while a recording is in progress.
Some distortion may appear on
the tape.
Tape Speed
SP(Standard Play)
T160
2 hrs.
40 mins.
5 hrs.
T120
T60
2 hrs.
1 hr.
LP(Long Play)
(playback only)
4 hrs.
6 hrs.
2 hrs.
3 hrs.
20 mins.
SLP(Super Long Play)
8 hrs.
Download from Www.Somanuals.com. All Manuals Search And Download.
26 One-Touch Recording (Videotapes)
A One-Touch Recording (OTR) is an immediate timed
recording from 30 minutes to eight hours long.
Before you begin ...
POWER PICTURE SLEEP SELECT
G Turn on the TV/VCR/DVD.
G Press SELECT to put the unit in TV/VCR mode. The red
VCR/TV light will appear on the front of the unit.
G Insert a videotape with its erase prevention tab in place.
Details are on page seven. Rewind or fast forward the tape
to the point at which you want to begin recording.
1
4
7
2
5
8
0
3
6
1
CH.
9
+100
VOL.
+10
SPEED C.RESET
ZOOM
MUTE
Press the Num ber buttons or CH. G/G to
2
select the channel you want to record.
1
PLAY
STOP
Remember, if the TV/VCR/DVD is connected to a
Cable Box/Satellite Receiver, the TV/VCR/DVD must
be on channel 3 or 4 or AUX (channel 00). Select the
channel you want to record at the Cable Box/Satellite
DISC
MENU
RECORD
4
DISPLAY
SETUP
ENTER
Receiver.
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
Press SPEED to select a tape recording speed
(SP or SLP). Details are on page 25.
A-B
AUDIO SUBTITLE ANGLE
MODE
2
Press REC/O TR on the front of the
TV/VCR/DVD repeatedly to select a recording
length. Recording will start im m ediately.
Each press of REC/OTR will increase the recording
time by 30 minutes. The maximum recording length is
eight hours.
Press REC/O TR on
the front of the
TV/VCR/DVD.
3
3
OTR (2:30)
SP
Press STO P C to stop a one-touch recording
before its designated end tim e. Otherwise,
recording will stop automatically at the time you des-
ignated. The TV/VCR/DVD will turn itself off automat-
ically at the end of the OTR.
4
Helpful Hints
• You cannot do an OTR with the
remote control.
• To show the remaining recording
time, press DISPLAY. OTR and
the remaining recording time will
appear briefly in the top left cor-
ner of the screen.
• If the tape ends before the
recording’s end time, the
TV/VCR/DVD will stop recording,
eject the tape, and turn itself off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rerecording (Tape Duplication) 27
AUDIO and VIDEO OUT Jacks on source unit
(VCR or Camcorder)
OP/EJECT
Audio Cable from
HEADPHONE VIDEO
L
AUDIO
R
AUDIO OUT to AUDIO In
VIDEO AUDIO
OUT
AUDIO and VIDEO In
Jacks on TV/VCR/DVD
Video Cable from
VIDEO OUT to VIDEO In
Make the connections shown above. Use audio
and video cables (not supplied). Connect the
source unit (VCR or Cam corder) to a power
source after connections are m ade.
1
The VCR or Camcorder will play your tape. Insert a
prerecorded tape in the source unit. If playback
begins, press STOP on the VCR or Camcorder.
2
3
The TV/VCR/DVD will record your tape. Insert a
blank videotape in the cassette com partm ent
of the TV/VCR/DVD. Make sure the tape’s record
tab is intact. The TV/VCR/DVD power will turn on
automatically.
If the power is already on and a videotape is in the
unit, make sure the unit is in TV/VCR mode. Press
SELECT so the red VCR/TV light appears on the front
of the unit.
Point the TV/VCR/DVD rem ote control at the
TV/VCR/DVD. Press 0, 0 on the rem ote. AUX
will appear on the screen. The TV/VCR/DVD is
now in Line Input or Auxiliary mode.
Helpful Hints
4
• Unauthorized recording of copy-
righted television programs,
videotapes, or other materials
may infringe on the rights of
copyright owners and violate
copyright laws.
Press SPEED until the desired tape speed (SP
or SLP) appears in the lower left corner of the
screen.
5
6
7
• Different brands of equipment
may operate differently.
Press PLAY on the VCR or Cam corder and
REC(ord)/O TR on your TV/VCR/DVD at the
sam e tim e. Copying will begin.
• Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
• Programs that are copyright
protected may not record clearly.
• You cannot record a DVD onto a
videotape using this
To stop copying, press STO P/EJECT on the
TV/VCR/DVD, then stop the tape on the VCR
or Cam corder.
TV/VCR/DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 Timer Recording (Videotapes)
Follow the steps below to program the TV/VCR/DVD to
record TV programs while you’re away from home. The
TV/VCR/DVD will turn itself on, record, and turn itself off
automatically. You can set a maximum of eight timer record-
ings.
POWER PICTURE SLEEP SELECT
Before you begin, m ake sure ...
1
4
7
2
5
8
0
3
6
CH.
G The clock is set. If the clock is not set, the MANUAL
CLOCK SET menu will appear. See pages 20-21 to set the
clock.
G Channels are set. Details are on pages 18-19.
G A tape is in the TV/VCR/DVD. Make sure the record tab is
intact. Details are on page seven.
9
+100
VOL.
+10
ZOOM
SPEED C.RESET
MUTE
PLAY
STOP
Press SETUP. Press GGor G to select TIMER
1-4
1
DISC
PRO GRAMMING, then press B.
RECORD
MENU
1
– TV/VCR SETUP –
DISPLAY
SETUP
ENTER
B TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
V-CHIP SET UP
AUDIO SUBTITLE ANGLE
MODE
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
Press G or G to select a program position.
Then, press B.
2
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
- -
- -
-/- - - - -
-/- - - - -
-/- - - - -
-:- -
-:- -
-:- -
-:- -
-:- -
-:- -
-:- -
-:- -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
B - - -/- - - - -
- -
- -
- -
- -
-/- - - - -
-/- - - - -
-/- - - - -
-/- - - - -
W hile CH is selected, press G or G to select
the channel you want to record. Then press B.
If the TV/VCR/DVD is connected to a Cable
Box/Satellite Receiver, the TV/VCR/DVD must be on
channel 3, 4, or AUX. Set CH as 03, 04, or AUX in
the Timer Programming menu. Choose the channel
you want to record at the Cable Box/Satellite
Receiver. Leave the Cable Box/Satellite Receiver on
for the timer recording. Leave the TV/VCR/DVD set
to AUX (channel 0,0).
3
4
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
- -
- -
-/- - - - -
-/- - - - -
-/- - - - -
-:- -
-:- -
-:- -
-:- -
-:- -
-:- -
-:- -
-:- -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
B 61 -/- - - - -
- -
- -
- -
- -
-/- - - - -
-/- - - - -
-/- - - - -
-/- - - - -
W hile DATE is selected, press G until the
desired date appears. Recording will happen once.
O r, to record a program at the sam e tim e on
the sam e channel every day, press G until
EVRY DAY appears.
O r, to record a program at the sam e tim e on
the sam e channel every week, (for exam ple
every Monday), press G until EVRY and your
desired day of the week appear together.
Finally, press B.
Helpful Hint
• If the tape ends before the
recording is complete, the
TV/VCR/DVD will stop recording
immediately and eject the tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording (Videotapes) (cont’d) 29
W hile BEGIN is selected, press G or G to
select the hour you want recording to begin.
AM or PM will appear with the hour. Choose the AM
or PM hour as you need.
Then, press B and press G or G to select the
m inute you want recording to start. (Example:
7:30 PM) Press B.
5
6
7
POWER PICTURE SLEEP SELECT
9
1
4
7
2
5
8
0
3
6
CH.
9
+100
– TIMER PROGRAMMING –
VOL.
CH DATE
BEGIN END
+10
- -
- -
- -
-/- - - - -
-/- - - - -
-/- - - - -
-:- -
-:- -
-:- -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
SPEED C.RESET
ZOOM
P
MUTE
B 61 7:05 FRI
7:30 M
-:- -
- -
- -
- -
- -
-/- - - - -
-/- - - - -
-/- - - - -
-/- - - - -
-:- -
-:- -
-:- -
PLAY
STOP
DISC
MENU
5-7
8
RECORD
W hile END is selected, press G or G to select
the hour at which you want recording to stop.
AM or PM will appear with the hour. Choose the AM
or PM hour as you need.
Then, press B and press G or G to select the
m inute at which you want recording to end.
(Example: 8:50PM) Press B.
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
- -
- -
-/- - - - -
-/- - - - -
-/- - - - -
-:- -
-:- -
-:- -
-:- - - -
-:- - - -
-:- - - -
P
P
B 61 7:05 FRI
7:30 M
-:- -
8:50 M - -
- -
- -
- -
- -
-/- - - - -
-/- - - - -
-/- - - - -
-/- - - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- -
-:- -
-:- -
Press G or G until the desired tape speed (SP
or SLP) appears at the right end of the line.
– TIMER PROGRAMMING –
CH DATE
BEGIN END
Helpful Hints
- -
- -
- -
-/- - - - -
-/- - - - -
-/- - - - -
-:- -
-:- -
-:- -
-:- - - -
-:- - - -
-:- - - -
• To correct information while set-
ting the Timer Recording, press
s to go back one step and
select the incorrect information.
Press G or G to enter the cor-
rect information.
• While a timer recording is in
progress, the red REC/OTR light
will flash.
• If a timer recording is set for
hours or days later, you can use
the TV/VCR/DVD until then. Just
be sure to turn off the
TV/VCR/DVD about five minutes
before the recording. Set the
Cable Box/Satellite Receiver if
appropriate.
P
P
B 61 7:05 FRI
7:30 M
-:- -
8:50 M SP
- -
- -
- -
- -
-/- - - - -
-/- - - - -
-/- - - - -
-/- - - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- -
-:- -
-:- -
Press SETUP to rem ove the m enu.
8
9
Press PO W ER to turn off the TV/VCR/DVD
and set the tim er recording. The red REC/OTR
light will appear.
You must turn off the TV/VCR/DVD to activate timer
recording. If the power is not off and you continue
watching TV, TIMER REC STANDBY starts flashing on
the screen two minutes before the programmed start
time. Turn off the unit to do the recording.
• If the record tab is missing, the
videotape will eject when you
press POWER to turn off the
TV/VCR/DVD. Insert a record-
able tape for the timer recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 Timer Recording (Videotapes) (cont’d)
Extending a Tim er Recording
To make a Timer Recording start and end later than originally scheduled,
follow these steps.
1 Press POWER to turn on the TV/VCR/DVD if necessary.
2 Press SETUP. Press GGor G to select TIMER PROGRAMMING. Press
B.
3 Press RECORD, then press G or GGto select the desired program.
4 Press RECORD again. Each press of RECORD will shift forward the
beginning/end time by 10 minutes. If the recording is in progress, each
press will shift forward the end time only.
If you adjust the times during recording, the recording speed automati-
cally changes to SLP.
To restore the original recording times, press k .
5 Press SETUP to remove the menu.
6 If the timer recording is scheduled to start later, press POWER to turn
off the TV/VCR/DVD for the recording.
Correcting a Tim er Recording
1 To correct information in a Timer Recording after you have finished
setting it, press POWER to turn on the TV/VCR/DVD if necessary.
2 Press SETUP. Press GGor G to select TIMER PROGRAMMING. Press
B.
3 Press GGor G to select a timer recording, then press B.
4 Press B repeatedly to select the information you want to change. Press
s to go back a step if necessary. Press G or G to enter the correct
information.
5 Press SETUP to remove the menu.
6 Press POWER to turn off the TV/VCR/DVD again to set the recording.
Cancelling Tim er Recordings
To cancel a tim er recording that is in progress:
1 Press POWER to turn on the TV/VCR/DVD, then press STOP/EJECT
on the front of the TV/VCR/DVD.
To cancel a tim er recording that has not started:
1 Press POWER to turn on the TV/VCR/DVD.
2 Press SETUP. Press GGor G to select TIMER PROGRAMMING.
Press B.
3 Press GGor G to select a timer recording.
4 Press C.RESET. All the information for the selected recording will dis-
appear.
5 Press SETUP to remove the menu.
Checking Scheduled Tim er Recordings
1 Press POWER to turn on the TV/VCR/DVD if necessary. The red
REC/OTR light will turn off.
2 Press SETUP. Press GGor G to select TIMER PROGRAMMING
if necessary.
3 Press B. The program details will appear on the screen.
4 Press SETUP to remove the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording Auto Return 31
Use this feature to find the beginning of a completed timer
recording.
Press SETUP.
POWER PICTURE SLEEP SELECT
1
2
1
4
7
2
5
8
0
3
6
Press G or G to select USER’S SET UP. Then,
CH.
press B.
– TV/VCR SETUP –
9
+100
VOL.
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
+10
ZOOM
SPEED C.RESET
MUTE
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
PLAY
STOP
TIME SEARCH
DISC
INDEX SEARCH
RECORD
MENU
2-4
1,5
DISPLAY
SETUP
ENTER
Press G or G to select AUTO RETURN.
TITLE
RETURN
REPEAT
3
4
CLEAR SEARCH MODE REPEAT
A-B
Press s or B until O N appears beside AUTO
RETURN.
To turn off AUTO RETURN, press s or B to
choose OFF instead.
AUDIO SUBTITLE ANGLE
MODE
– USER’S SET UP –
RENTAL
[OFF]
[OFF]
[ON]
[HIFI]
[STEREO]
REPEAT PLAY
B AUTO RETURN
VCR AUDIO
TV AUDIO
Press SETUP. When AUTO RETURN is ON, when
all the timer recordings are completed, the
TV/VCR/DVD will rewind to the beginning of the
recorded program(s). Press PLAY B to play the tape
from the beginning of the timer recordings.
5
Helpful Hints
• If you press POWER while the
tape is rewinding, Auto Return
will stop.
• If there is a power failure, the
TV/VCR/DVD will retain its mem-
ory for this feature.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 Repeat Play (Videotapes)
Repeat Play allows you to play a tape continuously. ALL
REPEAT will repeatedly play the tape from the beginning to
the end. BLANK REPEAT will repeatedly play the tape from
its beginning to the first part that is blank for more than 10
seconds.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
Press SETUP.
CH.
1
2
9
+100
VOL.
Press G or G to select USER’S SET UP.
Then, press B.
+10
ZOOM
SPEED C.RESET
MUTE
– TV/VCR SETUP –
6
2-4
PLAY
STOP
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
DISC
MENU
RECORD
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A
-B
1,5
AUDIO SUBTITLE ANGLE
MODE
Press G or G to select REPEAT PLAY.
3
4
Press s or B repeatedly until ALL or BLANK
appears beside REPEAT PLAY.
Or, to cancel REPEAT PLAY, press s or B to select
OFF.
– USER’S SET UP –
RENTAL
[OFF]
[ALL]
[OFF]
[HIFI]
B REPEAT PLAY
AUTO RETURN
VCR AUDIO
TV AUDIO
[STEREO]
Press SETUP to rem ove the m enu.
5
6
Press PLAY B to start repeat playback.
REPEAT PLAY B will appear on the screen briefly.
Helpful Hints
• Repeat Play stays in effect after
you turn off the TV/VCR/DVD.
The TV/VCR/DVD keeps the
Repeat Play setting even if the
power fails.
• If RENTAL is ON, RENTAL PLAY
B will appear on the screen
instead of REPEAT PLAY B.
Details are on page 33.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rental Playback (Videotapes) 33
This function enables you to improve picture quality when
playing worn cassettes such as rented videotapes.
POWER PICTURE SLEEP SELECT
Press SETUP. Press G or G to select USER’S
SET UP. Then, press B.
1
1
4
7
2
5
8
0
3
6
CH.
– TV/VCR SETUP –
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
9
+100
VOL.
+10
SPEED C.RESET
ZOOM
MUTE
ZERO RETURN
TIME SEARCH
INDEX SEARCH
PLAY
STOP
4
DISC
1,2
1,3
RECORD
MENU
Press G or G to select RENTAL.
Press s or B until O N appears beside
RENTAL. To turn off RENTAL, press s or B to
choose OFF.
DISPLAY
SETUP
ENTER
2
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
– USER’S SET UP –
AUDIO SUBTITLE ANGLE
MODE
B RENTAL
[ON]
REPEAT PLAY
AUTO RETURN
VCR AUDIO
TV AUDIO
[OFF]
[OFF]
[HIFI]
[STEREO]
Press SETUP to rem ove the m enu.
3
4
Press PLAY B to start playback. RENTAL PLAY
B will appear briefly on the screen.
Helpful Hints
• Once you select Rental Playback,
it stays in effect even after you
turn off the TV/VCR/DVD.
• The TV/VCR/DVD will retain the
Rental setting even if the power
fails.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 Zero Return (Videotapes)
The tape counter shows the elapsed recording or playback
time in hours, minutes, and seconds from the point at which
the counter was set to zero. The counter time will not
change on a blank tape or blank portions on a tape. The “–”
before the tape counter indicates the amount of remaining
recording/playing time before the counter reaches zero.
Follow the steps below to reset the tape counter to zero at
a tape location you want to refer to later.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
9
+100
VOL.
Play, rewind, or fast forward the tape to the
+10
location you would like to refer to later. Press
STOP C to stop the tape.
SPEED C.RESET
ZOOM
1
MUTE
2
PLAY
STOP
Press C.RESET to set the counter to 0:00:00.
DISC
MENU
1
3
2
3
RECORD
To return to this sam e point later, press
SETUP. Press G or G to select ZERO
RETURN. Then, press B.
The tape counter will appear on the screen. When
the tape reaches the point at which you set the
counter to zero, the tape will stop. Press PLAY B to
watch the tape from the designated point.
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
3
AUDIO SUBTITLE ANGLE
MODE
– TV/VCR SETUP –
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B ZERO RETURN
TIME SEARCH
INDEX SEARCH
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Search (Videotapes) 35
Time Search lets you quickly advance the videotape to a posi-
tion simply by entering the amount of playback time you want
to skip.
In the example below, Time Search is set to 2 hours, 50 min-
utes from the present position.
Insert a videotape.
1
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
Insert a videotape.
CH.
1
2
9
+100
VOL.
Press SETUP. Press G or G to select TIME
SEARCH. Then, press B.
+10
ZOOM
SPEED C.RESET
MUTE
– TV/VCR SETUP –
PLAY
STOP
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
DISC
MENU
RECORD
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
BTIME SEARCH
2-4
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
INDEX SEARCH
CLEAR SEARCH MODE REPEAT
A
-B
2
AUDIO SUBTITLE ANGLE
MODE
Press G or G until your desired tim e appears
beneath TIME SEARCH at the top of the
3
screen (for example, 2:50 for 2 hours, 50 minutes).
Each press of G or G increases or decreases the
length of time by 10 minutes.
To cancel the Time Search at this point, press SETUP.
TIME SEARCH
2 : 50
Press s or B to rewind or fast forward the
tape the length of tim e you chose. The
TV/VCR/DVD will rewind or fast forward the tape
the specified amount of time.
The time counts down on the screen as the search
progresses. When 0:00 is reached, the tape will start
playing automatically.
4
Or, to cancel the time search before it finishes, press
STOP C.
Helpful Hints
• A Time Search can be set up to a
maximum of 9 hours 50 minutes
in 10-minute increments.
• Time Search will not operate dur-
ing recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
36 Index Search (Videotapes)
This feature marks the starting point of a recording. It can be
returned to easily by fast forwarding or rewinding.
G An Index Mark will be made automatically when you press
RECORD. Marks also are made at the starting point of
timer recordings and One-Touch Recordings.
G Index Marks are not made if you press k during recording.
G The time gap between Index Marks should be greater than
one minute for SP recording and three minutes for SLP
recording.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
G In some cases, Index Marks at the beginning of a videotape
cannot be detected.
9
VOL.
+100
+10
SPEED C.RESET
Exam ple:
ZOOM
MUTE
You are watching Program 4 and want to fast forward to
Program 7. You must skip three programs (programs 4, 5, and
6).
PLAY
STOP
DISC
1-3
1
RECORD
MENU
CURRENTLY PLAYING PROGRAM
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
Beginning of tape
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7
End of tape
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
4
3
2
1
1
2
3
INDEX MARK
Press SETUP. Press G or G to select INDEX
SEARCH. Then, press B.
1
2
– TV/VCR SETUP –
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
B INDEX SEARCH
Press G or G until the num ber of program s you
want to skip appears beneath INDEX SEARCH.
(Example: “03” for 3 programs) To cancel an Index
Search at this point, press SETUP.
INDEX SEARCH
0 3
Helpful Hints
• Every time an Index Mark is
passed, the number beneath
INDEX SEARCH on the screen
decreases by one.
• A videotape must be in the
TV/VCR/DVD for this function to
work.
• You may search up to 20 Index
Marks.
• This function will not operate dur-
ing recording.
• To cancel an Index Search, press
STOP C .
Press s or B. The TV/VCR/DVD begins rewinding
or fast forwarding the videotape to the beginning of
the desired program.
3
4
When the program is reached, playback will start
automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
Videotape Playback Features 37
Slow Motion
Press k during playback to pause the video-
tape. Then press i / g to start slow
m otion playback. Sound will be mute during slow
motion playback. Slow motion playback will stop
automatically after five minutes to prevent damage to
the tape.
1
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
Press PLAY B to return to norm al playback.
9
+100
VOL.
2
+10
SPEED C.RESET
ZOOM
MUTE
PLAY
STOP
Forward and Reverse Searching
(SP/LP/SLP)
DISC
MENU
RECORD
During videotape playback, press and release
i / g or j / h. A fast forward or reverse
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
1
2
picture search will begin.
CLEAR SEARCH MODE REPEAT
A-B
To return to norm al playback, press PLAY B .
AUDIO SUBTITLE ANGLE
MODE
Super High Speed Searching (LP/SLP)
During tape playback, press i / g or j /
h, then press again. The TV/VCR/DVD will now
search in super high speed.
Press i / g or j / h repeatedly to switch
between regular and super high speed searching.
1
To return to norm al playback, press PLAY B.
2
Viewing a Still Picture
During tape playback, press k.
A still picture will appear on the screen. The picture
advances each time you press k.
After a tape is paused for five minutes, playback will
stop automatically. This prevents damage to the tape
and TV/VCR/DVD.
1
Helpful Hints
If the still picture vibrates vertically, stabilize
• SP/LP/SLP means this feature will
work with tapes recorded in
Standard Play, Long Play, or
Super Long Play. LP/SLP means
this feature will work with tapes
recorded in Long Play and Super
Long Play. Tape speed details
are on page 25.
the picture by pressing CH. G/G.
2
To release the still picture and return to nor-
m al playback, press PLAY B.
3
• During forward and reverse
searching, horizontal noise bars
will appear on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
38 Automatic Operation Features (Videotapes)
The following videotape features are available.
Autom atic Rewind, Eject, O ff
When you play, fast forward, or record a videotape to its
end, the TV/VCR/DVD will rewind the tape, stop, turn itself
off, and eject the tape.
If REPEAT PLAY is ON, playback will start again instead.
Details are on page 32.
The tape will not rewind automatically during timer recording
or One-Touch Recording. To rewind a tape automatically after
timer recordings, see Auto Return details on page 31.
Autom atic Tracking Adjustm ent
The TV/VCR/DVD automatically adjusts the videotape track-
ing to give you the best possible picture quality. With some
recordings, however, you may get a better picture using the
manual tracking controls (see below).
Manual Tracking
To adjust the tracking manually, press the CHANNEL G/G
buttons on the front of the TV/VCR/DVD or the CH. G/G
buttons on the remote control during playback.
Tracking returns to Automatic Tracking Adjustment when
you insert a tape or press STOP C.
After
Tracking
Adjustment
Before
Tracking
Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
Closed Caption (TV/VCR) 39
Follow the steps below to select closed captions for TV pro-
gramming. Not all TV programs and commercials have closed
captions or all types of closed captions (second language,
half-screen text, etc.). If closed captioning is not broadcast,
you cannot receive it. This does not indicate a problem with
the TV/VCR/DVD. Check your TV program listings for
shows with closed captions.
If the TV/VCR/DVD receives poor quality television signals,
the captions may contain errors, or there might be no cap-
tions at all. Some possible causes of poor quality signals are:
G Automobile ignition noise
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
9
+100
VOL.
+10
SPEED C.RESET
ZOOM
MUTE
G Electric motor noise
G Weak signal reception
PLAY
STOP
G Multiplex signal reception (ghosts or screen flutter)
G Playback of poorly recorded or worn videotapes.
DISC
RECORD
MENU
1-2
1,3
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
Press SETUP.
CLEAR SEARCH MODE REPEAT
Press G or G to select CAPTIO N.
A-B
1
AUDIO SUBTITLE ANGLE
MODE
– TV/VCR SETUP –
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
Press s or B to select CAPTIO N1,
CAPTIO N2, TEXT1, TEXT2, or O FF.
CAPTION1 displays standard closed captions (what a
character is saying). CAPTION2 displays foreign lan-
guage closed captions (foreign language words show-
ing what a character is saying).
2
TEXT1 and TEXT2 display half-screen text (such as a
channel guide, schedule, or announcement).
OFF turns off closed captions. Captions will not
appear on the screen.
Helpful Hints
• If a black box appears on the
screen, a TEXT mode is selected.
Select CAPTION1, CAPTION2, or
OFF.
• The TV/VCR/DVD retains the
Closed Caption setting if the
power fails.
– TV/VCR SETUP –
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH
• Abbreviations, symbols, and other
grammatical shortcuts may be
used in order to keep pace with
the on-screen action. This is not a
problem with the TV/VCR/DVD.
• Changing channels may delay
closed captions for a few seconds.
• Adjusting or muting the volume
may delay closed captions for a
few seconds.
INDEX SEARCH
Press SETUP to rem ove the m enu.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
40 Sleep Timer
Use the Sleep Timer to program the TV/VCR/DVD to shut
off in a certain amount of time.
POWER PICTURE SLEEP SELECT
1
Press SLEEP repeatedly until your desired
am ount of tim e appears on the screen with
SLEEP.
Each press of SLEEP will increase the time by 30 min-
utes. You may set a Sleep Timer of 30, 60, 90, or 120
minutes.
1
1
4
7
2
5
8
0
3
6
CH.
9
VOL.
+100
+10
After five seconds, the Sleep Timer information will
disappear from the screen.
SPEED C.RESET
ZOOM
MUTE
PLAY
STOP
DISC
MENU
RECORD
DISPLAY
SETUP
ENTER
SLEEP 120 MINUTE
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
The TV/VCR/DVD will turn itself off after the select-
ed amount of time has passed.
A
-B
AUDIO SUBTITLE ANGLE
MODE
To Cancel the Sleep Tim er
Press SLEEP repeatedly until “SLEEP 0 MINUTE” appears.
Helpful Hint
• To see how much time remains
before the TV/VCR/DVD turns
itself off, press SLEEP once. The
information will disappear auto-
matically in five seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting V-Chip (TV) 41
V-Chip Settings
You can set the TV/VCR/DVD to block TV channels that
you do not want children to access.
G Before you begin, press SELECT to put the TV/VCR/DVD
in TV/VCR mode. The red VCR/TV light will appear on
the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
Press SETUP. Press G or G to select V-CHIP
2
SET UP. Then, press B.
9
+100
1
VOL.
– TV/VCR SETUP –
+10
SPEED C.RESET
ZOOM
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
MUTE
PLAY
STOP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
DISC
MENU
RECORD
ZERO RETURN
1,3,4
1,5
TIME SEARCH
INDEX SEARCH
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
Press the Num ber buttons to enter the access
code. When entering the access code for the first
time or if there has been a power failure, enter
default code 0000.
CLEAR SEARCH MODE REPEAT
A-B
2
AUDIO SUBTITLE ANGLE
MODE
ACCESS CODE
_
_
_
_
Press G or G to select TV RATING. Then,
press B.
3
4
– V-CHIP SET UP –
B TV RATING
MPAA RATING
CHANGE CODE
Press G or G to select the TV Rating level at
which you want to block viewing, then press
once. If you press B more than once, the subratings
for that category will appear. Details are on page 42.
When you select the rating category and set it to
BLOCK, the higher ratings will turn to BLOCK auto-
matically. Also, lower ratings will turn to VIEW auto-
matically.
B
TV Rating Explanations
When you turn “TV-Y” to VIEW (or BLOCK), all
ratings will turn to VIEW (or BLOCK) automatically.
• TV-Y - Appropriate for all chil-
dren
• TV-Y7 - Appropriate for chil-
dren seven and older
• TV-G - General Audience
• TV-PG - Parental Guidance
suggested.
B TV–Y
TV–Y7 (
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
)
TV–G
TV–PG
TV–14
(
(
)
)
)
TV–MA(
• TV-14 - Unsuitable for children
under 14
• TV-MA - Mature audience only
Press SETUP to save your settings.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
42 Setting V-Chip (TV) (cont’d)
V-Chip Subratings
You can select subratings for TV-Y7, TV-PG, TV-14, or
TV-MA.
POWER PICTURE SLEEP SELECT
G Before you begin, press SELECT to put the TV/VCR/DVD
in TV/VCR mode. The red VCR/TV light will appear on
the front of the TV/VCR/DVD.
1
4
7
2
5
8
0
3
6
CH.
Press SETUP.
3
9
+100
1
2
VOL.
+10
ZOOM
Press G or G to select V-CHIP SET UP.
SPEED C.RESET
MUTE
Press B.
– TV/VCR SETUP –
PLAY
STOP
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
DISC
MENU
RECORD
2,4,5
1,6
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
INDEX SEARCH
A-B
AUDIO SUBTITLE ANGLE
MODE
Press the Num ber buttons to enter the access
code. The default code is 0000 (if you have not set
up your own code yet).
3
ACCESS CODE
_
_
_
_
Press G or G to select TV RATING. Press B.
4
5
– V-CHIP SET UP –
B TV RATING
MPAA RATING
CHANGE CODE
Helpful Hints
• When you select TV-MA, “D” for
dialog is not an available subrat-
ing.
• Blocked subratings will appear
beside the rating category in the
TV ratings menu.
• To change the rating, you must
select a TV channel that is not
protected. If PROTECTED
appears on the screen, change
to a channel that is not protect-
ed (blocked).
• You cannot BLOCK a subrating
(D, L, S, or V) if the main cate-
gory is set to VIEW. However,
you can set a subrating to VIEW
even when the main category is
set to BLOCK.
Press L to select the rating you wish to adjust.
Then, press B twice to go to its subratings.
TV–Y7
B FV
[BLOCK]
[BLOCK]
Example: TV-Y7 subratings
G W hen you select TV-Y7:
Press G or G to select FV (Fantasy Violence, vio-
lence that seems realistic to young children). Then,
press B to select BLOCK or VIEW.
G W hen you select TV-PG, TV-14, or TV-MA:
Press G or G to select “D” (Suggestive Dialog),
“L” (Coarse Language), “S” (Sexual Situation), or
“V” (Violence). Then, press B repeatedly to select
BLOCK or VIEW.
• Changing the category to BLOCK
or VIEW automatically changes
all its subratings to the same
(BLOCK or VIEW).
Press SETUP to save your settings.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting V-Chip (TV) (cont’d) 43
MPAA Rating Settings
You can block TV channel viewing according to the Motion
Picture Association ratings. To do so, follow these steps.
POWER PICTURE SLEEP SELECT
G Before you begin, press SELECT to put the TV/VCR/DVD
in TV/VCR mode. The red VCR/TV light will appear on
the front of the TV/VCR/DVD.
1
4
7
2
5
8
0
3
6
CH.
3
Press SETUP.
9
+100
VOL.
+10
ZOOM
1
2
SPEED C.RESET
MUTE
Press G or G to select V-CHIP SET UP.
Then, press B.
PLAY
STOP
– TV/VCR SETUP –
DISC
MENU
RECORD
2,4,5
1,6
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
INDEX SEARCH
Press the Num ber buttons to enter the access
code. (The default code is 0000 if you have not set
up your own code yet.)
3
ACCESS CODE
_
_
_
_
Press G or G to select MPAA RATING.
Then, press B.
4
5
– V-CHIP SET UP –
TV RATING
B MPAA RATING
CHANGE CODE
Press G or G to select the level at which you
want to block viewing. Then, press B to select
BLO CK or VIEW .
When you Block a category, higher ratings turn to
BLOCK automatically. Lower ratings turn to VIEW
automatically.
MPAA Rating Explanations
When you set G to VIEW or BLOCK, all ratings turn
to VIEW or BLOCK automatically.
• G - General Audience
• PG - Parental Guidance suggested.
• PG-13 - Unsuitable for children
under 13
• R - Restricted; under 17 requires
accompanying parent or adult
guardian
G
PG
PG-13
B R
NC-17
X
[VIEW]
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
• NC-17 - No one under 17 admitted
• X - Mature audience only
Press SETUP to save your settings.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
44 Setting V-Chip (TV) (cont’d)
Changing the Access Code
Although the default code 0000 is supplied with the
TV/VCR/DVD, you can set your own access code.
G Before you begin, press SELECT to put the TV/VCR/DVD
in TV/VCR mode. The red VCR/TV light will appear on
the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
3,5
Press SETUP.
9
+100
1
VOL.
+10
Press G or G to select V-CHIP SET UP.
SPEED C.RESET
ZOOM
MUTE
Then, press B.
2
PLAY
STOP
Press the Num ber buttons to enter the old
access code. When doing this for the first time, use
0000.
DISC
MENU
2,4
1,6
RECORD
3
DISPLAY
SETUP
ENTER
ACCESS CODE
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
_
_
_
_
A-B
AUDIO SUBTITLE ANGLE
MODE
Press G or G to select CHANGE CODE.
Then, press B .
4
5
– V-CHIP SET UP –
TV RATING
MPAA RATING
B CHANGE CODE
Press the Num ber buttons to enter your desired
access code in the NEW CODE space. Then,
enter the sam e code in the CONFIRM CODE
space.
The V-CHIP SET UP screen will reappear.
NEW CODE
X X X X
CONFIRM CODE
_
_
_
_
Helpful Hints
• If you enter the wrong code in the
CONFIRM CODE space, repeat
step 5. Enter the same new code
exactly in the CONFIRM CODE
space.
• If you unplug the power cord or if
the power fails, the default code
will be active again (0000).
Change your access code again as
necessary.
Press SETUP to save your settings.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Channel Television Sound 45
W hile watching a TV channel, press DISPLAY
twice to see the sound status in the top right
corner of the screen.
1
POWER PICTURE SLEEP SELECT
STOP
12:00AM
CH 123
1
4
7
2
5
8
0
3
6
CH.
STEREO/SAP
9
VOL.
+100
+10
SPEED C.RESET
ZOOM
MUTE
G When a program is broadcast in stereo, STEREO appears
on the right side of the screen.
G When a program is broadcast in second audio, SAP
appears on the right side of the screen.
PLAY
STOP
DISC
MENU
RECORD
G When a program is broadcast both in stereo and second
audio, STEREO and SAP both appear on the screen.
G Although a program may be broadcast in both stereo and
second audio, you cannot record in both stereo and sec-
ond audio at the same time.
G During tape playback, HIFI will appear in the top left cor-
ner of the screen if VCR AUDIO is set to HIFI. Details are
on page 46.
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
1
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
G If you play non-HiFi tapes while VCR AUDIO is set to
HIFI, HIFI will disappear from the screen. The
TV/VCR/DVD will play the videotape in monaural sound
automatically.
G You must set the TV/VCR/DVD to record in either
STEREO or SAP. Do this by changing the TV AUDIO set-
ting as described on page 47.
Second Audio Program: Your program can
be received in a second language or as a
radio station.
SAP
High Fidelity: Produces better sound than
standard stereo.
HiFi
Download from Www.Somanuals.com. All Manuals Search And Download.
46 Multi-Channel Television Sound (cont’d)
Selecting HiFi or Monaural Sound
You can set the TV/VCR/DVD to play videotapes in either
High Fidelity (HIFI) or Monaural (MONO or single-channel)
sound. To do so, follow these steps.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
Press SETUP.
9
+100
1
2
VOL.
+10
Press G or G to select USER’S SET UP.
SPEED C.RESET
ZOOM
MUTE
Then, press B.
– TV/VCR SETUP –
PLAY
STOP
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
DISC
MENU
RECORD
2-4
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
TIME SEARCH
CLEAR SEARCH MODE REPEAT
INDEX SEARCH
A
-B
1,5
AUDIO SUBTITLE ANGLE
MODE
Press G or G to select VCR AUDIO .
3
– USER’S SET UP –
RENTAL
[ON]
REPEAT PLAY
AUTO RETURN
B VCR AUDIO
TV AUDIO
[OFF]
[OFF]
[HIFI]
[STEREO]
Press s or B to select MO NO or HIFI.
– USER’S SET UP –
4
5
RENTAL
[ON]
REPEAT PLAY
AUTO RETURN
B VCR AUDIO
TV AUDIO
[OFF]
[OFF]
[HIFI]
[STEREO]
Press SETUP to rem ove the m enus.
Helpful Hints
• Normally, select HIFI for play-
back with HiFi sound.
• Non-HiFi tapes will play in
monaural sound automatically.
• MTS broadcasts automatically
record in HiFi unless you select
SAP before recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Channel Television Sound (cont’d) 47
Setting the TV/VCR/DVD to receive or
record in Stereo, Second Audio, or
Monaural Sound
POWER PICTURE SLEEP SELECT
Because TV channels can broadcast in Stereo or Second
Audio, set the TV/VCR/DVD to receive and record the chan-
nels in the sound mode you prefer.
1
4
7
2
5
8
0
3
6
CH.
9
+100
Press SETUP. Press G or G to select USER’S
VOL.
+10
SET UP. Then, press B.
1
SPEED C.RESET ZOOM
MUTE
– TV/VCR SETUP –
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
PLAY
STOP
DISC
MENU
RECORD
1-3
1,4
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
DISPLAY
ENTER
SETUP
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
Press G or G to select TV AUDIO .
AUDIO SUBTITLE ANGLE
MODE
2
– USER’S SET UP –
RENTAL
[ON]
REPEAT PLAY
AUTO RETURN
VCR AUDIO
B TV AUDIO
[OFF]
[OFF]
[HIFI]
[STEREO]
Press s or B until STEREO , SAP, or MO NO
appears.
3
4
Press SETUP to rem ove the m enus.
Helpful Hint
• If you select second audio when
second audio is not available, the
TV/VCR/DVD will record normal
audio.
Download from Www.Somanuals.com. All Manuals Search And Download.
48 Disc Menus, Title Menus (DVDs)
Disc Menus
Some DVDs contain menus that describe the contents of the
DVD or allow you to customize DVD playback. For example,
the menu may offer choices for subtitle languages, special fea-
tures, or scene selection. To use the DVD Disc Menu and
select playback features, follow these steps.
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
9
+100
VOL.
+10
Press DISC MENU. The DVD’s Disc menu will
SPEED C.RESET
ZOOM
MUTE
appear.
1
2
PLAY
STOP
Press G G
s
B to select an item , then press
ENTER. Continue this process to set up all the fea-
DISC
MENU
RECORD
tures you want or to start Disc playback.
2
DISPLAY
SETUP
1
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
Title Menus
Some DVDs have a Title Menu, which lists the Titles available
on the DVD. Use the Title Menu to start playback at a spe-
cific Title.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
9
VOL.
+100
+10
SPEED C.RESET
ZOOM
Press TITLE. The Title Menu will appear.
MUTE
If a Title menu is not available, the symbol may
appear on the screen. Or, if the DVD only has a main
Disc menu as described above, it may appear when
you press TITLE.
1
PLAY
STOP
DISC
MENU
RECORD
2
1
DISPLAY
SETUP
Press GGs B to select the desired Title, then
ENTER
TITLE
RETURN
REPEAT
press ENTER. Playback will begin at the Title you
2
selected.
CLEAR SEARCH MODE REPEAT
A-B
Helpful Hints
• Menus vary among DVDs. Follow
the information with the DVD.
• Not all DVDs have Title menus.
• Some DVDs may refer to
Chapters as “scenes.” Some
DVDs may refer to the Title Menu
as the “scene index.”
Download from Www.Somanuals.com. All Manuals Search And Download.
Fast Forward/Reverse Search (Discs) 49
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
During playback, press and hold i / g or
j / h on the rem ote for two seconds.
CH.
1
G
During DVD playback, pressing and holding
i / or j / repeatedly will forward or
9
+100
g
h
VOL.
+10
ZOOM
reverse the picture at twice, eight times, 30 times, or
60 times the normal playback speed.
SPEED C.RESET
MUTE
An
appear briefly on the screento indicate reverse
searching. Or, x2, x8, x30, or x60
will appear briefly on the screento indicate fast for-
ward searching.
h
x2,
h
x8,
h
x30, or
h
x60 will
2
1
PLAY
STOP
g
g
g
g
DISC
RECORD
MENU
DISPLAY
SETUP
ENTER
Sound will be muted during searching.
TITLE
RETURN
REPEAT
G During Audio CD playback, you may search forward
or backward only at 16 times the normal playback
speed. An hx16 or gx16 will appear briefly on
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
the screen. Pressing and holding i / g or
j
/
h repeatedly will not affect the speed of the
search. Sound will be intermittent during searching
on an Audio CD.
G
Press and hold i /
Press and hold j /
g
h
for a forward search.
for a reverse search.
Example: Playing a DVD in
reverse at twice the normal
playing speed.
E
x2
Example: Fast forwarding
a DVD at twice the regular
playback speed.
D
x2
Example: Fast forwarding an Audio CD
at 16 times the regular playback speed.
D
x16
Press PLAY B to return to norm al playback.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
50 Specific Title/Chapter Playback (DVDs)
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
W ith a DVD in the TV/VCR/DVD, press
SEARCH MO DE once. The Title/Chapter Search
display will appear on the screen.
1
1
4
7
2
5
8
0
3
6
CH.
2,3
TT:1 / 4
CH:_ _ /17
9
+100
VOL.
+10
ZOOM
SPEED C.RESET
MUTE
PLAY
STOP
o
To select Title, press
to select the Title
space (beside TT), then press the Num ber but-
tons to enter the Title num ber. Complete this
within 30 seconds. The Chapter space (beside CH)
will be selected automatically.
DISC
2
3
RECORD
MENU
2
1
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
W ithin 30 seconds, press the Num ber buttons
to enter the Chapter num ber. In a few seconds,
the selected Chapter will start playing.
A-B
AUDIO SUBTITLE ANGLE
MODE
TT:4 / 4
CH:12/17
Helpful Hints
• Specific Title/Chapter playback is
not available with some DVDs.
• Press G / g during play-
back to skip to the next Chapter
quickly.
• Press j / h briefly to
return to the beginning of the
current Chapter during playback.
Press j / h repeatedly to
go to previous Chapters during
playback.
• Enter a zero before a single-digit
Chapter or Title number.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specific Time Playback (Discs) 51
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
During playback, press SEARCH MO DE repeat-
edly so the Time Search display appears on the
screen.
1
1
4
7
2
5
8
0
3
6
CH.
TIME
:
:
– –
–
TOTAL 1:29:00
2
1
9
+100
VOL.
+10
ZOOM
SPEED C.RESET
MUTE
PLAY
STOP
W ithin 30 seconds, use the Num ber buttons to
enter the elapsed playing tim e at which you
want playback to begin. Enter the time in hours,
minutes, and seconds. Within a few seconds, playback
will start at the specified time.
G Example: 1 hour, 23 minutes, and 30 seconds
1 G 2 G 3 G 3 G 0
G Make sure the time you enter is within the total
time of the current Title or Track. If it is not, the
TIME space will clear and playback will continue at its
current point.
DISC
MENU
RECORD
2
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
G If you make a mistake, press CLEAR to erase all the
information in the TIME space. Enter the correct infor-
mation.
Download from Www.Somanuals.com. All Manuals Search And Download.
52 Specific Track Playback (Audio CDs)
There are three ways to begin playback on an Audio CD at a
specific Track: Use the Number buttons, the SEARCH MODE
button, or j / h or i / g.
G Before you begin, press SELECT to put the
POWER PICTURE SLEEP SELECT
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
1
4
7
2
5
8
0
3
6
CH.
1
1-2
9
+100
VOL.
Using the Num ber Buttons to Select a Track
+10
During playback or when playback is stopped, press the
Num ber buttons to enter the desired Track num ber.
Playback will start at the selected Track.
SPEED C.RESET
ZOOM
MUTE
PLAY
STOP
3
For single-digit Tracks (1-9), press a single Number button.
For Tracks 10 and above, press the +100/+10 button so the
Search display (TR: _ _ ) appears on the screen. Within 30 sec-
onds, press the Number button of the first digit, then press the
Number button of the second digit. For example, to play Track
26, press +100/+10, then Number 2, then Number 6.
If you enter a Track number that is not available on the Disc,
playback will not begin (or the current Track will continue to
play). The Search display (TR: _ _ ) will disappear automatically.
DISC
MENU
RECORD
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
2
2
Using SEARCH MODE to Select a Track
Press SEARCH MODE once so the Track Search dis-
play appears. W ithin 30 seconds, press the Num ber
buttons to select the Track num ber you desire. Playback
will begin at the selected Track. For a single-digit Track (1-9),
enter a zero first. For example, to play Track 5, press 0, 5.
(You do not have to use the +100/+10 button for Tracks 10
and above in this situation.) If you enter a Track number that is
not available, playback will not begin (or the current Track will
continue to play). The space beside TR will clear automatically
in the Search display.
3
Using j / h or i / g to Select a Track
During playback, press i / g to skip the current
Track and m ove to the next Track. The Track number
will appear briefly on the screen.
Helpful Hints
• You cannot use i / g to go
from the last Track on the Disc to
the first Track.
During playback, press j / h to return to the
beginning of the current Track. Press j /
repeatedly to go to previous Tracks. The Track number
will appear briefly on the screen.
• If you press i / g or
j
h
/
h when playback is paused,
the selected Track will begin
playing automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
Paused/Step-by-Step Playback, Resume (Discs) 53
Paused/Step-by-Step Playback
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
During playback, press k. Play will pause and the
sound will be muted.
1
4
7
2
5
8
0
3
6
1
2
CH.
W hen playing a DVD, press k repeatedly to
see the picture advance one fram e (or step) at
a tim e. The sound will remain mute. Pressing
repeatedly during Audio CD playback will have no
effect.
9
+100
VOL.
k
+10
ZOOM
SPEED C.RESET
MUTE
1-2
3
PLAY
STOP
Press PLAY B to resum e playback.
DISC
MENU
RECORD
DISPLAY
3
ENTER
Resum e
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
Press STO P C during Disc playback. In a few
seconds, the following Resume message will appear on
the screen.
CH.
1
9
+100
VOL.
+10
ZOOM
SPEED C.RESET
MUTE
Press 'PLAY' to play from here.
To play the beginning, press 'STOP' first
and then 'PLAY'.
2
PLAY
STOP
DISC
MENU
RECORD
DISPLAY
1
Press PLAY B. In a few seconds, playback will
resume from the point at which playback stopped last.
You can resume play at the same point even if you
turn off the TV/VCR/DVD, then turn it on again later.
However, opening the disc tray will cancel the
Resume feature.
ENTER
2
Helpful Hint
• To cancel resume playback and
start playing the Disc from the
beginning, press STOP C a sec-
ond time while playback is
stopped. The Stop symbol (C) will
appear in the top right corner of
the screen. Press PLAY B to start
playing the Disc from the
beginning.
Download from Www.Somanuals.com. All Manuals Search And Download.
54 Repeat, A-B Repeat (Discs)
Repeat
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
During Disc playback, repeatedly press REPEAT
until the repeat m ode you want appears on the
screen as shown in the examples below.
On a DVD, press REPEAT repeatedly to select
REPEAT [CHAPTER], REPEAT [TITLE], or REPEAT
[OFF].
9
+100
1
VOL.
+10
SPEED C.RESET
ZOOM
MUTE
PLAY
STOP
On an Audio CD, press REPEAT repeatedly to select
REPEAT [TRACK], REPEAT [ALL], or REPEAT [OFF].
Selecting a new Chapter, Title, or Track will cancel
repeat playback.
DISC
MENU
RECORD
DISPLAY
SETUP
ENTER
REPEAT
[TRACK]
REPEAT
[CHAPTER]
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
1
Example: Repeat a
DVD Chapter
Example: Repeat an
Audio CD Track
POWER PICTURE SLEEP SELECT
A-B Repeat
1
4
7
2
5
8
0
3
6
Follow these steps to play a section of a Disc repeatedly.
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
CH.
9
+100
VOL.
+10
SPEED C.RESET
ZOOM
MUTE
Press PLAY B to play the Disc to the point at
which you want repeated playback to begin.
PLAY
STOP
1
2
1
Press REPEAT A-B to set the starting point
(A). REPEAT [A -] will appear on the screen briefly.
DISC
MENU
RECORD
DISPLAY
SETUP
REPEAT
ENTER
[A –
]
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
2-4
• Repeat playback and A-B Repeat
are not available with all Discs.
• The entire A-B Repeat section
must be within a single Title or
Track. If you do not enter Point B
before the end of the Track or
Title is reached, the end of the
Track or Title will become Point B
automatically.
Helpful Hints
Play or fast forward the Disc to the point at
which you want repeated playback to end, then
press REPEAT A-B again. REPEAT [A-B] will
appear on the screen. The section will begin to play
repeatedly.
3
4
REPEAT
[A–B]
• Point B must be later on the
Disc than Point A.
• Pressing STOP C will cancel A-B
Repeat.
To cancel A-B Repeat, press REPEAT A-B so
REPEAT [OFF] appears on the screen. Regular
playback will resume.
Download from Www.Somanuals.com. All Manuals Search And Download.
Markers (Discs) 55
Use Markers to remember your favorite places on a Disc. To
set the Markers, follow these steps.
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
Play the Disc to within 30 seconds prior to the point
at which you want to set the Marker. During play-
back, press SEARCH MO DE three tim es. The
Markers will appear at the top of the screen for 30
seconds.
CH.
1
9
+100
VOL.
+10
ZOOM
SPEED C.RESET
MUTE
1 2 3 4 5 AC
NOT SET
PLAY
STOP
DISC
MENU
RECORD
2-4
1,4
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
W ithin 30 seconds, press s or B to select 1, 2,
3, 4, or 5. Make sure “NOT SET” appears beneath
the number when selected.
A-B
AUDIO SUBTITLE ANGLE
MODE
2
3
Let the Disc continue to play to the point at
which you want to set the Marker (up to 30
seconds).
W hen the Disc reaches the point you want to
rem em ber, press ENTER. The Title and elapsed
playing time (DVD) or Track and its elapsed playing
time (Audio CD) will appear in the display.
1 2 3 4 5 AC
1 2 3 4 5 AC
_
TT01 0:12:01
_
TR 05 0:00:41
Helpful Hints
To return to the Marker later, press SEARCH
MO DE three tim es during playback.
Press s or B to choose the Marker you want,
then press ENTER. Disc play will continue from the
marked point.
• Opening the disc tray or turning
off the TV/VCR/DVD will erase
all the Markers.
4
• To erase a single Marker, press
SEARCH MODE three times,
then press s or B to select the
Marker number. Press CLEAR.
NOT SET will appear on the dis-
play. Press RETURN or SEARCH
MODE to remove the display.
• To erase all the Markers, press
SEARCH MODE three times,
then press B repeatedly to
select AC (all clear). Press
ENTER. Press SEARCH MODE
to remove the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
56 Subtitles, Camera Angles (DVDs)
Subtitles
You can select a language for DVD subtitles during playback.
You can select only languages that are available on the DVD.
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
PLAY
STOP
DISC
RECORD
MENU
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
Press SUBTITLE during playback so the subtitle
display appears on the screen.
CLEAR SEARCH MODE REPEAT
1
2
A-B
AUDIO SUBTITLE ANGLE
MODE
W ithin five seconds, press SUBTITLE repeat-
edly to select a subtitle language. After a few sec-
onds, the subtitles will appear.
The number of available languages appears at the right
of the subtitle display. In the example below, eight lan-
guages are available ( /8). The language may be abbre-
viated, such as ENG for English.
1-3
1-2
SUBTITLE 1. ENG / 8
To turn off Subtitles, press SUBTITLE repeat-
edly until SUBTITLE O FF appears.
3
Cam era Angles
PLAY
STOP
Some DVDs contain scenes recorded from different angles.
You may select a camera angle during playback.
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
DISC
RECORD
MENU
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
Press ANGLE during playback so the Angle dis-
play appears on the screen.
AUDIO SUBTITLE ANGLE
MODE
1
2
W ithin five seconds, press ANGLE repeatedly
to select a different angle. The number of available
angles appears at the right of the Angle display. In this
example, eight angles are available ( /8).
Helpful Hints
• On some DVDs, you must select
subtitles in the Disc menu.
ANGLE 1 / 8
• If the desired language does not
appear after pressing SUBTITLE
several times, the Disc does not
have subtitles in that language.
• Opening the disc tray will cancel
your subtitle setting.
• If the current segment of the Disc
has multiple camera angles,
will appear on the screen. ANGLE
ICON must be ON. Details are on
page 68.
• The camera angle will not
change if the DVD does not con-
tain sequences recorded from
different camera angles.
Download from Www.Somanuals.com. All Manuals Search And Download.
Slow Motion, Zoom (DVDs) 57
Slow Motion
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
During playback, press k.
1
1
4
7
2
5
8
0
3
6
CH.
Press and hold i / g for two seconds. Slow
9
+100
VOL.
motion playback will begin. Press and hold i /
g
2
+10
ZOOM
1
3
repeatedly to vary the speed of slow motion playback.
You may play the DVD at 1/16, 1/8, or 1/2 the normal
playback speed; IBx1/16, IBx1/8, or IBx1/2 will
appear on the screen.
SPEED C.RESET
MUTE
PLAY
STOP
2
DISC
x1/16
Press PLAY B to return to norm al playback.
3
Zoom
You can enlarge the DVD picture to twice or four times the
regular size.
POWER PICTURE SLEEP SELECT
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
1
4
7
2
5
8
0
3
6
CH.
9
+100
Press ZO O M during playback. ZOOM [x2] will
VOL.
appear on the screen. The picture will be twice as
large as normal. Press ZOOM again to increase the
picture to four times the regular size. ZOOM [x4] will
appear on the screen.
+10
ZOOM
1
SPEED C.RESET
MUTE
1,3
PLAY
STOP
ZOOM [x2]
ZOOM [x4]
DISC
MENU
RECORD
DISPLAY
SETUP
ENTER
2
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
Press GGs B to m ove the zoom ed im age up,
down, left, or right.
2
3
Helpful Hints
• The sound will be mute during
slow motion playback.
• You cannot play a DVD in
reverse slow motion.
• The gray box with an inner blue
box that shows during Zoomed
playback is the position guide. To
remove it or show it, press
ENTER. The position of the blue
box inside the gray box indicates
the position of the zoomed
image within the overall picture.
Position guide example:
The Zoomed area is in
the top portion of the
overall picture.
To return the picture to its norm al size, press
ZO O M so ZO O M [O FF] appears on the
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
58 Parental Controls Password (DVDs)
Parental Controls blocks viewing of DVDs that exceed the
limits you set. This feature will not limit viewing if the DVD
maker did not code the DVD. So, make sure your DVDs
play according to your settings before you allow children
access to the TV/VCR/DVD. Follow the steps below to
change your Parental Controls password.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
G Before you begin, press SELECT to put the
9
+100
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
2-5
VOL.
+10
SPEED C.RESET
ZOOM
MUTE
W hile playback is stopped, press SETUP twice.
PLAY
STOP
1
SET-UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
DISC
MENU
RECORD
4.PARENTAL
DISPLAY
SETUP
SELECT:
EXIT
/
SET
:
ENTER
RETURN
ENTER
:
SETUP CANCEL
:
5
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
Press the Num ber 4 button to select
PARENTAL. The SET-UP PARENTAL CONTROLS
PASSWORD menu will appear.
1,6
A-B
AUDIO SUBTITLE ANGLE
MODE
2
SET-UP
PARENTAL CONTROLS
SET-UP
PARENTAL CONTROLS
PASSWORD
PASSWORD
Please enter a 4-digit password.
- - - -
Enter current password.
- - - -
or
EXIT
:
SETUP CANCEL
:
RETURN
EXIT
:
SETUP CANCEL
:
RETURN
Example: First-time
setting password
Example: Entering
existing password
Press the Num ber buttons to enter your four-
digit password. When doing this for the first time,
enter any four digits, then press ENTER. That number
will be used as the password from that point forward.
3
4
Press the Num ber 2 button to select CHANGE.
Helpful Hints
SET-UP
• If you forget the password, you
can reset all of the Player’s set-
tings to the factory presets.
Remove the Disc from the
PARENTAL CONTROLS
1.PARENTAL LEVEL
2.CHANGE
ALL
SELECT:
EXIT
/
SET
:
ENTER
RETURN
:
SETUP CANCEL
:
Player. When in DVD mode,
press the Number buttons
1,2,3,4, then press the DISPLAY
button. Then, press the Number
button 3. “EEPROM CLEAR:OK”
will appear and the original set-
tings of the Player will be
Press the Num ber buttons to enter your new
four-digit password (which will appear on the
screen), then press ENTER.
5
6
SET-UP
PARENTAL CONTROLS
PASSWORD
restored. Press the SELECT but-
ton to put the unit in TV/VCR
mode, or turn off the unit.
• Write down your password in
case you forget it.
• Asterisks (*) will appear instead
of your password to protect the
privacy of the password.
• The unit will retain the password
after a power failure.
Please enter a 4-digit password.
- - - -
EXIT
:
SETUP CANCEL
:
RETURN
Press SETUP to rem ove the m enu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Controls Levels (DVDs) 59
Follow these steps to set the rating level for your DVDs.
DVDs whose ratings exceed the level you set will not play.
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
W hile playback is stopped, press SETUP twice.
9
+100
2-5
VOL.
1
SET-UP
+10
1.LANGUAGE
2.DISPLAY
3.AUDIO
SPEED C.RESET
ZOOM
MUTE
4.PARENTAL
PLAY
STOP
SELECT:
EXIT
/
SET
:
ENTER
RETURN
:
SETUP CANCEL
:
DISC
MENU
RECORD
Press the Num ber 4 button to select
PARENTAL. The SET-UP PARENTAL CONTROLS
PASSWORD screen will appear.
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
2
3
CLEAR SEARCH MODE REPEAT
A-B
SET-UP
1,6
AUDIO SUBTITLE ANGLE
MODE
PARENTAL CONTROLS
PASSWORD
Enter current password.
- - - -
RATING
required for
viewers under 18.
• 4 - PG-13 -
Unsuitable for
children under 13
• 3 - PG - Parental
Guidance sug-
gested.
• 1- G - General
Audience; recom-
mended for all
ages.
EXPLANATIONS
• ALL - Parental
Controls is inac-
tive; all Discs can
play.
• 8 - Adult material
• 7 - NC-17 Not
appropriate for
EXIT
:
SETUP CANCEL
:
RETURN
Press the Num ber buttons to enter your four-
digit password. If your entry is incorrect, press
ENTER, then enter the correct password as prompted
by the on-screen message.
children under 17
• 6 - R - Restricted;
parental approval
SET-UP
PARENTAL CONTROLS
1.PARENTAL LEVEL
2.CHANGE
ALL
SELECT:
EXIT
/
SET
:
ENTER
RETURN
:
SETUP CANCEL
:
Helpful Hints
•
When you play a DVD whose rating
exceeds the level you set, an on-
screen message will indicate the DVD
cannot play. Remove the DVD, then
select a level that allows playback or
select ALL to turn off Parental
Controls. Reload the DVD and begin
playback. Some DVDs may let you
enter your four-digit password to
begin playback. Refer to the DVD
messages.
Press the Num ber 1 button to select
PARENTAL LEVEL.
4
5
6
SET-UP
PARENTAL CONTROLS
PARENTAL LEVEL
ALL
8
7
6
5
[NC-17]
[R]
SELECT:
EXIT
/
SET
:
ENTER
RETURN
:
SETUP CANCEL
:
Press a Num ber button to select the level you
desire. For example, if you want to play Discs rated
PG-13, press the Number 4 button (press G or G to
see all the rating levels). The level you select will
appear on the screen beside PARENTAL LEVEL in the
SET-UP PARENTAL CONTROLS screen.
• Some DVDs are not compatible
with Parental Controls. Make sure
the DVD plays according to the
Parental Controls settings you
have made before you allow chil-
dren access to the TV/VCR/DVD.
• You cannot change Parental Level
settings until you enter the correct
password.
To play all ratings, select ALL. Press G repeatedly to
select ALL, then press ENTER.
Press SETUP to rem ove the m enu.
Download from Www.Somanuals.com. All Manuals Search And Download.
60 Audio Language, Stereo Sound Mode (Discs)
Audio Language
You can select a language for DVDs during playback if multi-
ple languages are available on the DVD.
POWER PICTURE SLEEP SELECT
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
1
4
7
2
5
8
0
3
6
CH.
9
+100
During DVD playback, press AUDIO so the
VOL.
+10
ZOOM
audio display appears on the screen.
1
2
SPEED C.RESET
MUTE
W ithin five seconds, press AUDIO repeatedly
to choose one of the available languages. The
number of available languages appears at the right of
the audio display. In this example, eight languages are
available ( /8).
The language may be abbreviated (such as ENG for
English in this example). Other details about the avail-
able audio also may appear.
PLAY
STOP
DISC
MENU
RECORD
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
AUDIO 1. ENG DolbyD 5.1CH 48k/3
1-2
Stereo Sound Mode
When playing Audio CDs that are recorded in stereo (on the
right and left channels), you can choose to hear the right, left,
or both channels (stereo).
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
9
+100
VOL.
+10
Press AUDIO repeatedly during playback to
SPEED C.RESET
ZOOM
choose AUDIO STEREO , AUDIO L-CH, or
AUDIO R-CH.
MUTE
1
PLAY
STOP
AUDIO STEREO
Both right and left channels
are active (stereo).
DISC
MENU
RECORD
DISPLAY
SETUP
ENTER
AUDIO L-CH
TITLE
RETURN
REPEAT
Only the left channel is active.
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
AUDIO R-CH
Only the right channel is active.
1
Helpful Hints
• If a desired audio language is
not available after pressing
AUDIO several times, the DVD
does not have that language.
• Some DVDs only allow you to
change the language in the Disc
menu. Details are on page 48.
Download from Www.Somanuals.com. All Manuals Search And Download.
Random Playback, Programs (Audio CDs) 61
Random Playback
You may play the Tracks of an Audio CD in Random order
instead of the order in which they are recorded (1,2,3...).
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
9
+100
W ith play stopped, press MO DE twice so the
VOL.
RANDO M screen appears.
+10
1
SPEED C.RESET
ZOOM
RANDOM
MUTE
PLAY
STOP
2
1
DISC
MENU
RECORD
START
:
PLAY
EXIT
:
MODE
DISPLAY
SETUP
W hile the RANDO M screen appears, press
PLAY B. The Tracks will play in random order. Each
Track will play once, then play will stop.
ENTER
TITLE
RETURN
REPEAT
2
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
Program s
You may determine the order in which Tracks will play. The
order you set is called the Program.
POWER PICTURE SLEEP SELECT
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
1
4
7
2
5
8
0
3
6
CH.
2,3
4
9
+100
W hile play is stopped, press MODE. The PRO-
VOL.
GRAM screen will appear.
+10
ZOOM
1
SPEED C.RESET
PROGRAM
TIME 0:00:00 1/1
MUTE
--
PLAY
STOP
DISC
MENU
START: PLAY
DELETE
EXIT
:
CLEAR
RETURN
RECORD
RANDOM
:
MODE
:
DISPLAY
SETUP
Press the Num ber buttons to enter the num ber
of the first Track that you want to play.
ENTER
TITLE
RETURN
REPEAT
2
G Press CLEAR to remove the last Track in a Program.
G Enter single-digit Tracks with one Number button.
(For Track three, press the Number 3 button.)
G For Tracks 10 and above, press the +100/+10 button,
then the Number button for the first digit, then the
Number button for the second digit. (To play Track
26, press +100/+10, then 2, then 6.)
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
1
Helpful Hints
• You cannot select a specific Track
to play or start random play during
programmed play.
PROGRAM
TIME 2:07:43 1/1
• During programmed playback,
press REPEAT so REPEAT
02 05 07 04 10 14 06 15 21 08
20 28 10 25 35 12 30 42 11 34
49 16 40 58 18 45 63 01 03
_
_
[TRACK] or REPEAT [ALL]
appears. The current Track or the
Program will play repeatedly.
• To see Tracks in the Program,
press MODE during playback.
• Invalid Track numbers will be
rejected and erased from the
Program. Enter an available Track.
• Turning off the unit or opening the
disc tray will erase the Program.
START: PLAY
RANDOM MODE
DELETE
EXIT
:
CLEAR
RETURN
:
:
Repeat step 2 to enter all the Tracks you want
in the Program . The total playing time of the
Program appears beside TIME at the top of the screen.
3
4
Press PLAY B. Each Track in the Program will play
once, then play will stop.
Download from Www.Somanuals.com. All Manuals Search And Download.
62 MP3 Playback
The TV/VCR/DVD will play MP3 files recorded on a CD-RW
(Compact Disc-Rewritable) or CD-R (CD-Recordable).
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
Put a CD-RW or CD-R with MP3 files in the
9
+100
TV/VCR/DVD. Playback may start automatically.
Press STO P C to stop play if necessary.
VOL.
1
2
+10
SPEED C.RESET
ZOOM
MUTE
The MP3 menu will appear on the screen, listing the
Tracks and Albums on the Disc. Press G or G to
select the Album or Track you want to play.
Or, choose FIRST PLAY to start playing all the Tracks,
starting with the first Track listed.
Or, press TITLE to return to the first item on the first
MP3 screen.
3
2-3
PLAY
STOP
DISC
MENU
RECORD
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
If you chose a Track at step 2, press PLAY
B
AUDIO SUBTITLE ANGLE
MODE
or ENTER. Tracks will play in the order they were
recorded (1, 2, 3), starting with the Track you just
selected.
If you chose an Album , press ENTER. (Albums
have a “+” before the Album name.) The Tracks in the
Album will list on the screen. Press G or G to
select the Track you want to play, then press
3
4
1,4
PLAY
B
or ENTER.
To stop playback, press STO P C.
Helpful Hints
• Folders are known as Albums.
Files are known as Tracks.
• If all the Tracks cannot appear
on the screen at the same time,
G indicates more Tracks on the
next screen; G indicates previ-
ous screens. The current screen
number and the total number of
screens will appear in the lower
right corner of the Track/Album
list.
• A total of 255 Albums and
Tracks can be recognized.
• Discs recorded in multi-session
recordings will not play on this
TV/VCR/DVD.
• Only Tracks having file names
ending in .mp3 will play.
• You can play MP3 files recorded
at a minimum of 112 kbps.
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Display Information, Track Selection 63
MP3 Display Inform ation
You can review MP3 file information during playback.
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
Press DISPLAY during playback. The Album/Track
9
+100
list will appear. The current Track will show in yellow.
VOL.
1
2
+10
SPEED C.RESET
ZOOM
Press DISPLAY again. The elapsed playing time of
the current Track will appear at the top of the screen.
MUTE
PLAY
STOP
T indicates Track repeat
A indicates Album repeat
D indicates Disc repeat
DISC
MENU
RECORD
DISPLAY
SETUP
ENTER
TITLE
RETURN
1-3
Press DISPLAY again to rem ove the display.
3
MP3 Track Selection
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
Press SEARCH MO DE during MP3 playback. The
Album/Track list will appear. The current Track will
be in yellow.
9
+100
1
VOL.
+10
ALBUM NAME
SPEED C.RESET
ZOOM
MUTE
+ALBUM01
TRACK11
TRACK12
TRACK13
TRACK14
1/15
PLAY
STOP
2
SELECT:
RETURN
/
ENTER
START
:
B
DISC
MENU
:
s
:
PLAY
RECORD
DISPLAY
SETUP
ENTER
Press G or G to select a Track you want to
play. Press PLAY B to start playing the Track.
O r, press G or G to select an Album . Press
ENTER, then press G or G to select a Track,
then press PLAY B. The Album/Track list will dis-
appear automatically.
TITLE
RETURN
REPEAT
2
CLEAR SEARCH MODE REPEAT
A-B
1
Helpful Hints
• During playback, press the
Number buttons to play another
Track immediately. Or, press
H / h or i / g to
move to previous or subsequent
Tracks.
• If the Track you chose is not
available or cannot be accessed,
will appear on the screen.
Play may resume or continue at
a different Track.
• Specific Time playback is not
possible with MP3 files.
Download from Www.Somanuals.com. All Manuals Search And Download.
64 Random MP3 Playback, MP3 Programs
Random MP3 Playback
G Before you begin, press SELECT to put the
POWER PICTURE SLEEP SELECT
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
1
4
7
2
5
8
0
3
6
CH.
W hile playback is stopped, press MO DE twice.
The RANDOM screen will appear.
9
+100
1
VOL.
RANDOM
+10
SPEED C.RESET
ZOOM
MUTE
2
1
PLAY
STOP
START
:
PLAY
EXIT
:
MODE
DISC
RECORD
MENU
Press PLAY B to play the tracks in random order.
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
2
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
MP3 Program s
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
W hile playback is stopped, press MO DE. The
POWER PICTURE SLEEP SELECT
PROGRAM screen will appear.
1
1
4
7
2
5
8
0
3
6
PROGRAM FOLDER NAME
CH.
+ALBUM01
+ALBUM02
+ALBUM03
TRACK01
TRACK02
1/2
9
+100
VOL.
+10
START
RANDOM: MODE
:
PLAY
DELETE:
EXIT
CLEAR
RETURN
:
SPEED C.RESET
ZOOM
MUTE
Press G or G to select a Track, then press
ENTER to save it in the Program . The pro-
grammed Track will appear on the right side of the
screen. Press G or G to see additional Tracks.
Repeat step 2 to enter all the Tracks you want.
If the Track is within an Album, press G or G to
select the Album, then press ENTER. Press G or G
to choose the Track, then press ENTER.
PLAY
STOP
3
4
2
DISC
RECORD
MENU
DISPLAY
SETUP
ENTER
2
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
PROGRAM - ALBUM01
1
+ALBUM11
+ALBUM12
TRACK01
TRACK11
TRACK12
TRACK11
1/1
1/2
START
:
PLAY
DELETE:
EXIT
CLEAR
RETURN
RAMDOM: MODE
:
Helpful Hints
• Press CLEAR to delete the last
item in the Program.
• Turning off the TV/VCR/DVD or
opening the Disc tray will erase
the Program.
Press PLAY B to play the Program.
3
4
Press STO P C to stop playing the Program.
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Settings (DVD mode) 65
Choose the appropriate Audio Settings for your equipment
and Discs. These settings only affect playback of Discs in the
TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
1
4
7
2
5
8
0
3
6
CH.
2
9
+100
W hile playback is stopped, press SETUP twice.
VOL.
The SET-UP screen will appear.
+10
ZOOM
1
SPEED C.RESET
SET-UP
MUTE
1.LANGUAGE
2.DISPLAY
3.AUDIO
PLAY
STOP
4.PARENTAL
DISC
MENU
RECORD
SELECT:
EXIT
/
SET
:
ENTER
RETURN
:
SETUP CANCEL
:
3-4
1,5
DISPLAY
SETUP
ENTER
Press the Num ber 3 button to select AUDIO .
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
2
3
4
A
-B
AUDIO SUBTITLE ANGLE
MODE
Press o or p to select an item , then follow
step 4 accordingly.
G
If you selected DRC, press ENTER repeatedly
to turn Dynamic Range Control (DRC) ON or OFF.
This levels the sound volume by suppressing loud
sound and raising the volume of low sound.
G If you selected DO LBY DIGITAL, press
ENTER repeatedly to turn DOLBY DIGITAL
ON or OFF. Select ON if you connected the
TV/VCR/DVD to a stereo that is Dolby Digital com-
patible. Details are on page 10.
G If you selected DO W N SAMPLING, press
ENTER. Then, press G or G to select AUTO ,
48 kHz, or 96 kHz, then press ENTER. The
AUDIO CONTROLS menu will reappear.
Select 96 kHz if the DVD was recorded in PCM (Pulse
Code Modulation) 96 kHz. Otherwise, select 48 kHz.
DRC
DOLBY DIGITAL
SET-UP
SET-UP
AUDIO CONTROLS
AUDIO CONTROLS
1.DRC
2.DOLBY DIGITAL
3.DOWN SAMPLING
ON
ON
AUTO
1.DRC
2.DOLBY DIGITAL
3.DOWN SAMPLING
OFF
ON
AUTO
SELECT:
EXIT
/
SET
:
ENTER
RETURN
SELECT:
EXIT
/
SET
:
ENTER
RETURN
:
SETUP CANCEL
:
:
SETUP CANCEL
:
DOWN SAMPLING
SET-UP
AUDIO CONTROLS
DOWN SAMPLING
1.AUTO
2.48kHz
3.96kHz
SELECT:
EXIT
/
SET
:
ENTER
RETURN
Helpful Hints
:
SETUP CANCEL
:
• Setting DOWN SAMPLING to
96kHz activates copyright protec-
tion and mutes the sound.
Selecting AUTO sets downsam-
pling to 48kHz.
Press SETUP to rem ove the m enu.
5
• Dolby Digital must be available on
the Disc before you will hear it.
Download from Www.Somanuals.com. All Manuals Search And Download.
66 Language Settings (DVDs)
You can use the LANGUAGE settings to select different lan-
guages for the Audio or Subtitles of DVDs, as well as lan-
guages for DVD Disc menus.
POWER PICTURE SLEEP SELECT
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
1
4
7
2
5
8
0
3
6
CH.
2
1
9
+100
W hile playback is stopped, press SETUP twice.
VOL.
The SET-UP screen appears.
+10
ZOOM
1
SPEED C.RESET
MUTE
SET-UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
PLAY
STOP
4.PARENTAL
DISC
MENU
RECORD
SELECT:
EXIT
/
SET
:
ENTER
RETURN
:
SETUP CANCEL
:
DISPLAY
SETUP
ENTER
3
TITLE
RETURN
REPEAT
Press the Num ber 1 button to select
LANGUAGE.
CLEAR SEARCH MODE REPEAT
A-B
2
3
AUDIO SUBTITLE ANGLE
MODE
SET-UP
LANGUAGE CONTROLS
1.AUDIO
2.SUBTITLE
3.DISC MENU
ORIGINAL
ENGLISH
ORIGINAL
SELECT:
/
SET
:
ENTER
EXIT
:
SETUP CANCEL
:
RETURN
Press o or p to select AUDIO , SUBTITLE, or
DISC MENU. Then, press ENTER. The menu for
the selected item will appear.
SET-UP
AUDIO: The DVD’s audio
LANGUAGE CONTROLS
AUDIO
plays in the selected language,
if available on the DVD.
1.ORIGINAL
2. ENGLISH
3. FRENCH
4. SPANISH
5. GERMAN
p
SELECT:
/
SET
:
ENTER
EXIT
:
SETUP CANCEL
:
RETURN
SET-UP
LANGUAGE CONTROLS
SUBTITLE
SUBTITLE: DVD subtitles
appear in the chosen lan-
guage, if available on the
DVD.
1. OFF
2. ENGLISH
3. FRENCH
4. SPANISH
5. GERMAN
p
SELECT:
/
SET
:
ENTER
RETURN
EXIT
:
SETUP CANCEL
:
SET-UP
LANGUAGE CONTROLS
DISC MENU
Helpful Hints
• Some DVDs only allow you to
change audio, subtitle, or menu
languages in the DVD Disc menu.
Details are on page 48.
DISC MENU: A DVD’s Disc
menu appears in the chosen
language, if available on the
DVD.
1. ORIGINAL
2. ENGLISH
3. FRENCH
4. SPANISH
5. GERMAN
p
SELECT:
EXIT
/
SET
:
ENTER
RETURN
:
SETUP CANCEL
:
• Language options for AUDIO,
SUBTITLE, and DISC MENU are
not available with some DVDs.
Use the AUDIO and SUBTITLE
buttons instead to select different
languages. Details are on pages
56 (subtitles) and 60 (audio).
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Settings (DVDs) (cont’d) 67
o
p
Press
or
to select a setting. Press ENTER.
GIf you select OTHER at the AUDIO, SUBTITLE, or
DISC MENU screen, press four Number buttons to
enter the code for the language you desire. Refer to
the list below for the correct language code. You can
only select other languages for AUDIO, SUBTITLE,
and DISC MENU if the language is available on the
Disc.
POWER PICTURE SLEEP SELECT
4
5
1
4
7
2
5
8
0
3
6
CH.
4
9
+100
VOL.
+10
GEach screen can show a maximum of five languages.
SPEED C.RESET
ZOOM
MUTE
o
p
.
To see additional languages, press
or
PLAY
STOP
SET-UP
LANGUAGE CONTROLS
AUDIO
LANGUAGE CODE
DISC
MENU
RECORD
Please enter a 4-digit language code.
_ _ _ _
DISPLAY
SETUP
ENTER
EXIT:
SETUP
CANCEL
:
RETURN
TITLE
RETURN
REPEAT
4
CLEAR SEARCH MODE REPEAT
5
A-B
Press SETUP to rem ove the m enu.
AUDIO SUBTITLE ANGLE
MODE
Language Code Language Code Language Code Language Code Language Code
A-B English[ENG] 5160 Javanese 5669 Oriya 6164 Somali 6561
Abkhazian 5760 Oromo (Afan)6159 Spanish[SPA] 5165
5161 Kannada
5166 Kashmiri
Kazakh
Afar
5765 Panjabi
5757 Pashto
6247 Sundanese
6265 Swahili
6567
6569
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
5247 Swedish[SWE] 6568
6258
T
Tagalog
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6265 Tamil
6367 Tatar
Telugu
6459 Thai
Tibetan
6461 Tigrinya
5861 Rhaeto-Romance
5847
5868 Romanian[RUM]
Bangla
Bashkir
Basque
Bengali
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
5868
5860 Russian[RUS] 6467 Tonga
5866 Tsonga
5367 Macedonian 5957
5360 Lithuanian
S
Turkish[TUR] 6664
6559 Turkmen
5447 Malagasy
5569 Malay
5455 Malayalam
Maltese
5467 Maori
Marathi
5953 Samoan
6657
6669
5965 Sangho
5958 Sanskrit
5966 Serbian
5955 Serbo-Croatian
5964
6553 Twi
6547
U-Z
6564 Ukrainian
Urdu
6554 Uzbek
6757
6764
6772
C-E
Cambodian 5759 Icelandic[ICE] 5565 Moldavian
5961 Sesotho
5960 Setswana
6047 Shona
6051 Sindhi
Singhalese
6061 Siswat
6566 Vietnamese 6855
Catalan
4947 Indonesian
5560 Mongolian
5547 Nauru
5551 Nepali
6660 Volapuk
6560 Welsh
6550 Wolof
6555 Xhosa
6565 Yiddish
6557 Yoruba
6558 Zulu
6861
4971
6961
7054
5655
7161
7267
Chinese[CHI] 7254 Interlingua
Corsican
Croatian
Czech
4961 Interlingue
5464 Inupiak
4965 Irish[IRI]
5557 Norwegian[NOR]
5347
5566
Danish[DAN] 5047 Italian[ITA]
O-R
Slovak
6149 Slovenian
Dutch[DUT] 6058 Japanese[JPN] 5647 Occitan
Download from Www.Somanuals.com. All Manuals Search And Download.
68 Display Settings
You can alter the display screens and on-screen messages or
adjust the Aspect Ratio. To do so, follow the steps below.
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
2
W hen playback is stopped, press SETUP twice.
The SET-UP screen will appear.
9
+100
1
VOL.
SET-UP
+10
1.LANGUAGE
2.DISPLAY
3.AUDIO
SPEED C.RESET
ZOOM
MUTE
4.PARENTAL
SELECT:
EXIT
/
SET
:
ENTER
RETURN
PLAY
STOP
:
SETUP CANCEL
:
DISC
3
RECORD
MENU
Press the Num ber 2 button to select DISPLAY.
SET-UP
DISPLAY
SETUP
2
3
DISPLAY CONTROLS
ENTER
1.TV MODE
2.ANGLE ICON
4:3 LETTER BOX
ON
TITLE
RETURN
REPEAT
3.AUTO POWER OFF ON
4.BACKGROUND BLACK
CLEAR SEARCH MODE REPEAT
1,4
A
-B
SELECT:
EXIT
/
SET
:
ENTER
RETURN
:
SETUP CANCEL
:
AUDIO SUBTITLE ANGLE
MODE
Press K or L to select an item . Press ENTER.
G If you selected TV MODE: Press G or G to choose
4:3 LETTER BOX if you want black bars to appear
at the top and bottom of the picture. Or, choose
4:3 PAN & SCAN for a full height picture, with both
sides trimmed to fit the screen. Press ENTER to
save the setting and return to the previous menu.
G If you selected ANGLE ICON, press ENTER repeat-
edly to turn ANGLE ICON ON or OFF. Choose
ON to see the Angle icon if multiple camera angles
are available during DVD playback. Choose OFF to
disable the Angle icon. Details are on page 56.
G If you selected AUTO POWER OFF, press ENTER
repeatedly to turn AUTO POWER OFF ON or
OFF. Choose ON if you want the TV/VCR/DVD to
exit screen saver automatically after 35 minutes of
no use in DVD mode.
G If you selected BACKGROUND, press ENTER
repeatedly to select BLACK or BLUE as the back-
ground color for the on-screen menus.
TV MODE
BACKGROUND
SET-UP
SET-UP
DISPLAY CONTROLS
TV MODE
DISPLAY CONTROLS
Helpful Hints
1.TV MODE
2.ANGLE ICON
4:3 LETTER BOX
ON
1.4:3 LETTER BOX
3.AUTO POWER OFF ON
4.BACKGROUND BLACK
2.4:3 PAN
&
SCAN
• Selecting a different TV MODE
setting is only effective if it is
available on the DVD.
SELECT:
EXIT
/
SET
:
ENTER
RETURN
SELECT:
/
SET
:
ENTER
RETURN
:
SETUP CANCEL
:
EXIT
:
SETUP CANCEL
:
• DVDs may refer to the Letterbox
format as the widescreen ver-
sion. Letterbox stretches the pic-
ture horizontally so the picture
resembles movies seen at a the-
ater.
• DVDs may refer to Pan and
Scan as “reformatting the pic-
ture to fit your TV screen.”
AUTO POWER OFF
ANGLE ICON
SET-UP
SET-UP
DISPLAY CONTROLS
DISPLAY CONTROLS
1.TV MODE
2.ANGLE ICON
4:3 LETTER BOX
ON
1.TV MODE
2.ANGLE ICON
4:3 LETTER BOX
ON
3.AUTO POWER OFF ON
4.BACKGROUND BLACK
3.AUTO POWER OFF ON
4.BACKGROUND BLACK
SELECT:
EXIT
/
SET
:
ENTER
RETURN
SELECT:
EXIT
/
SET
:
ENTER
RETURN
:
SETUP CANCEL
:
:
SETUP CANCEL
:
Press SETUP to rem ove the m enus.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Displays (Discs) 69
Check current DVD information by pressing DISPLAY.
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
Press DISPLAY during DVD playback.
CH 7/49 0:01:46 - 0:03:27
1
9
+100
VOL.
Elapsed playing time
of the current Chapter;
remaining playing time
of the current Chapter
CH (Chapter):
Current Chapter number
/ total Chapters
+10
SPEED C.RESET
ZOOM
MUTE
PLAY
STOP
Press DISPLAY again. If you want, you can press a
DISC
MENU
Number button now to start playing a specific Chapter.
RECORD
2
3
4
TT 1/2 0:00:00 - 1:23:45
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
TT (Title):
Current Title number
/ Total Titles
Elapsed playing time of the
current Title; remaining playing
time of the current Title
4
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
Press DISPLAY again.
BIT RATE: The quantity of
information recorded on the DVD.
BIT RATE
C
1-4
Current Repeat setting, if active
C: Chapter repeat
T: Title repeat
A
B: A-B repeat
Press DISPLAY or RETURN to rem ove the
display.
Or, check information about Audio CDs using DISPLAY.
Press DISPLAY during Audio CD playback.
POWER PICTURE SLEEP SELECT
TR 4/12 0:03:21 - 0:02:15
1
1
4
7
2
5
8
0
3
6
TR (Track):
Current Track number
/ total Tracks
Elapsed playing time
of the current Track;
remaining playing time
of the current Track
CH.
9
+100
1-3
VOL.
+10
ZOOM
SPEED C.RESET
Press DISPLAY again. If you want, you can use the
Number buttons now to start playing a specific Track.
MUTE
2
3
PLAY
STOP
ALL 4/12 0:13:45 - 0:45:40
T
Current Repeat setting, if active
T: Track repeat
A: All repeat
ALL:
DISC
RECORD
MENU
Current Track number
/ total Tracks
A
B: A-B repeat
DISPLAY
SETUP
Elapsed playing time
of the current Audio CD;
remaining playing time of
the current Audio CD
ENTER
TITLE
RETURN
3
Press DISPLAY or RETURN to rem ove the
display.
Helpful Hint
• The displays may appear differ-
ently if special playback features
are active (Repeat, Program,
etc.).
Download from Www.Somanuals.com. All Manuals Search And Download.
70 Black Level Settings, TruSurround Setting (Discs)
Black Level Settings
Use Black Level to brighten the black parts of the DVD picture.
G Before you begin, press SELECT to put the
POWER PICTURE SLEEP SELECT
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
1
4
7
2
5
8
0
3
6
CH.
Press MODE once during DVD playback so
BLACK LEVEL shows in the top left corner of
the screen.
9
+100
VOL.
1
2
+10
ZOOM
SPEED C.RESET
MUTE
W ithin 10 seconds, press ENTER repeatedly to
choose ON or OFF. ON brightens the dark parts of
the picture. OFF shows the original picture as recorded.
PLAY
STOP
DISC
MENU
RECORD
2
1
BLACK LEVEL : O N
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
TruSurround Setting
You can enjoy improved stereo sound when you play DVDs
or Audio CDs recorded in Dolby Digital or PCM 48 kHz.
Check the Disc case for details on availability.
POWER PICTURE SLEEP SELECT
1
4
7
2
5
8
0
3
6
CH.
G Before you begin, press SELECT to put the
TV/VCR/DVD in DVD m ode. The green DVD light
will appear on the front of the TV/VCR/DVD.
9
VOL.
+100
+10
SPEED C.RESET
ZOOM
Press MO DE twice during Disc playback so SRS
MUTE
TruSurround shows in the top left corner of
the screen.
1
2
PLAY
STOP
DISC
MENU
W ithin 10 seconds, press ENTER repeatedly to
choose O N or O FF. The default setting is OFF.
Choose ON if you connected the TV/VCR/DVD to a
stereo that has a Dolby Digital decoder. Make sure
the current Disc is recorded in Dolby Digital or PCM
48 kHz.
RECORD
2
1
DISPLAY
SETUP
ENTER
TITLE
RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
SRS TruSurround O N
Helpful Hints
• SRS TruSurround is available
when the TV/VCR/DVD is con-
nected to a Stereo using the red
and white AUDIO OUT jacks on
the back of the TV/VCR/DVD.
• If you connected the
TV/VCR/DVD to a stereo using
the COAXIAL Digital Audio Out
jack as described on page 10,
turn off SRS TruSurround.
This unit employs TruSurround system
of SRS Labs, Inc. as virtual technology.
TruSurround and the
symbol are trademarks of SRS Labs, Inc.
TruSurround technology is incorporated under license from SRS Labs, Inc.
Otherwise, there will be no sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary 71
AUDIO In Jack: jack on the front of the TV/VCR/DVD which is used to
receive or record audio from another source (VCR, Camcorder, etc.).
Autom atic Channel Setup: process in which the TV/VCR/DVD memo-
rizes all available TV channels. Then, when you push the CH. G/G buttons,
you only scan through channels you receive.
Auxiliary (AUX): The channel to which you set your TV/VCR/DVD during
dubbing or when viewing material that is playing on another device that is
connected to the TV/VCR/DVD (for example, a Camcorder or VCR or TV
channels from a Cable Box/Satellite Receiver). The auxiliary (or line input)
channel of the TV/VCR/DVD is always channel 00 (AUX).
Bands: settings that allow you to tune channels.
• Antenna – VHF (very high frequency; channels 2-13) and UHF (ultra high
frequency; channels 14-69).
• Cable – standard channels can be received without a Cable Box.
Brightness: adjusting increases or decreases the brightness of the color on
the screen.
CO AXIAL Digital Audio O ut jack: Sends digital audio to a stereo,
allowing you to adjust the volume at the stereo.
Color: adjusting pales or brightens the TV/VCR/DVD picture color.
Dolby Digital: A surround sound system that provides 5.1 channel sound as
used in movie theaters. Sound is heard through multiple channels, not just the
right and left as with standard stereo.
Dubbing: copying a videotape from a separate VCR.
HQ : high quality; a feature in the TV/VCR/DVD circuitry which provides
enhanced videotape picture detail through the TV/VCR/DVD.
O TR: One-Touch Recording; a timed recording that starts immediately and
records for 30 minutes to eight hours, whichever you specify.
Picture: adjusting increases or decreases the contrast of the picture on the
screen.
Sharpness: adjusting softens or clarifies the picture on the screen.
Tape Speeds: how fast the videotape travels during playback or recording.
The faster the tape speed, the better the recording quality will be. Faster
speeds (SP) also use more space on the tape. So, you can put more recording
on a tape if you use a slower tape speed (SLP).
• SP (standard play) – fastest tape speed (recording time for a T120 tape is
approximately two hours); best picture quality.
• LP (long play) – average tape speed; playback only on this TV/VCR/DVD.
• SLP (super long play) – slowest tape speed (recording time for a T120
tape is approximately six hours).
Tint: adjusting changes the tints of the picture from purple to green.
VIDEO In Jack: jack on the front of the TV/VCR/DVD which is used to
receive or record video from another source (VCR, Camcorder, etc.).
Download from Www.Somanuals.com. All Manuals Search And Download.
72 Helpful Hints
If you are having problems with your product, check this list of problems and possible solutions before
requesting service. You may be able to solve the problem yourself.
Location
For safe operation and satisfactory performance of your TV/VCR/DVD, remember the following:
• Shield it from direct sunlight and keep it away from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of the
TV/VCR/DVD. Do not place the TV/VCR/DVD on a carpet, as this will block the ventilation openings.
• Avoid locations subject to strong vibrations.
• Do not place the TV/VCR/DVD near strong magnetic fields.
• Do not move the TV/VCR/DVD from a cold place to a hot place, or vice versa.
Electrical Shock and Fire Hazards
• Do not handle the power cord with wet hands.
• Do not pull the power cord when disconnecting the TV/VCR/DVD from the AC (alternating current) wall
outlet. Grasp it by the plug.
• If you spill water on the TV/VCR/DVD, unplug the power cord immediately and take the TV/VCR/DVD to an
authorized service center.
• Do not put your fingers or objects into the cassette compartment or disc tray.
• Do not place anything on top of the TV/VCR/DVD.
Dew W arning (Moisture Condensation)
• Moisture may condense inside the unit when you move it from a cold place to a warm place, after heating a
cold room, or when the humidity is high. There is no warning that moisture is in your TV/VCR/DVD. Playing
a tape in a TV/VCR/DVD in which moisture has accumulated could damage the tape and the TV/VCR/DVD. If
you suspect moisture inside the TV/VCR/DVD, keep the TV/VCR/DVD power on (but do not play a tape) for
at least two hours. This will allow the TV/VCR/DVD to dry.
TV/VCR/DVD will not perform a tim er recording.
• Set the recording start and stop times correctly. Details are on pages 28-30.
Midnight is 12 a.m. Noon is 12 p.m.
• Make sure the TV/VCR/DVD power is off for the timer recording.
• Set the clock. Details are on pages 20-22.
• Put a videotape in the cassette compartment of the TV/VCR/DVD. The tape must have a record tab. Details
are on page seven.
• If the power fails, timer recordings will be restored when the clock resets. (The clock resets itself automati-
cally if you are using AUTO CLOCK. Details are on page 22. If you are not using AUTO CLOCK, reset the
clock manually. Details are on pages 20-21.) Timer recordings do not occur if set to take place during the
power failure.
TV/VCR/DVD will not record.
• Make sure the videotape has a record tab. Details are on page seven.
• Plug the power cord into an active AC outlet. Details are on page nine.
• Check your hookups. Details are on pages eight-nine.
• Set up the TV channels. Details are on pages 18-19.
• You cannot record DVDs onto a videotape using the TV/VCR/DVD.
Channel reception is poor.
• Check connections, then set up the channels again. Details are on pages 18-19.
TV/VCR/DVD has no power.
• Connect the power plug to an AC (alternating current) outlet completely.
A screen saver appears on the screen during DVD m ode.
• The DVD screen saver will appear if there is no activity in DVD mode for five minutes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Helpful Hints (cont’d) 73
Disc cannot play.
• Insert a playable Disc. Make sure the Disc is labelled for Region 1 or ALL regions and is NTSC compatible.
Details are on page six.
• Place the Disc correctly in the Disc tray. If the Disc is one-sided, place the Disc in the tray with the label facing
up. If the Disc is two-sided, make sure the label of the side you want to play is facing up.
• Clean the Disc. Make sure the Disc is not scratched or warped.
• Cancel the Parental Controls, enter the password, or change the control level. Details are on pages 58-59.
TV/VCR/DVD does not have a picture.
• Adjust the antenna or check the Cable TV or satellite signal connection. If using a Cable Box/Satellite Receiver,
set the TV/VCR/DVD to channel 3 or 4 or AUX (channel 00). Details are on pages eight-nine.
• Adjust the TV/VCR/DVD picture controls. Details are on page 24.
• Select an active channel. Details are on pages 18-19
• Make sure the Disc is compatible with the DVD Player of the TV/VCR/DVD. Details are on page six.
TV/VCR/DVD has poor sound or no sound.
• Press VOL. K/L to adjust the volume. Press MUTE to restore the volume.
• Check the audio settings for DVD mode. Details are on page 65.
• Check the audio settings of the Disc. For example, you may have selected “soundtrack” playback or an unavail-
able sound setting (such as Dolby Digital). Details are on pages 60 and 65. Try other sound options provided in
the DVD Disc menu.
You cannot choose a DVD feature, such as cam era angle or audio or subtitle language.
• The feature must be recorded on the DVD. Not all DVDs contain multiple angles, subtitles, etc. Refer to the
Disc case to see what features are available. If the feature is not available, the
may appear.
Videotape playback is poor or the tape is destroyed.
• Adjust the tracking. Details are on page 38.
• Use the Rental feature. Details are on page 33.
• If moisture has accumulated in the unit, keep the power on for at least two hours but do not play a tape.
TV/VCR/DVD does not display closed captions for TV program s.
• Make sure closed captioning is available for the program. Refer to the TV listings in your local newspaper.
Rem ote control does not operate the TV/VCR/DVD.
• Aim the remote control directly at the remote sensor on the front of the TV/VCR/DVD. Details are on pages
seven and 16.
• Remove all obstacles between the remote control and the TV/VCR/DVD.
• Inspect and replace the batteries in the remote control. Details are on page seven.
Num ber buttons will not select channels above 69.
• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, press the
+100/+10 button, then the Number buttons for the last two digits. Details are on page 11.
• If you are using an antenna and do not have Cable TV/Satellite, only channels 2-69 will be available.
You cannot insert a tape into the cassette com partm ent of the TV/VCR/DVD.
• Insert the tape with the window facing up and the record tab facing you.
• Make sure a tape isn’t already inside by pressing STOP/EJECT CA on the front of the TV/VCR/DVD.
• Gently push on the center of the tape. Never force a tape into the TV/VCR/DVD.
• If you have set a timer recording and the TV/VCR/DVD power is off, the TV/VCR/DVD will eject the tape if
the record tab is missing.
You cannot rem ove the tape from the TV/VCR/DVD.
• Make sure the power plug is completely connected to an AC (alternating current) outlet.
• If a timer recording is programmed, turn on the TV/VCR/DVD power, then eject the tape. Be sure to insert a
tape and turn off the TV/VCR/DVD power for the timer recording.
• Unplug the TV/VCR/DVD power cord for five minutes. Then, plug in the power cord again, then press POWER
on the TV/VCR/DVD. If the tape does not eject, press STOP/EJECT CA on the TV/VCR/DVD three to five
times. If the tape still does not eject, an authorized servicer may need to remove the tape.
TV/VCR/DVD ejects the tape when you try to start a recording.
• Make sure the tape has a record tab. Details are on page seven.
Download from Www.Somanuals.com. All Manuals Search And Download.
74 Specifications
General TV/VCR
CRT :
Electrical Specifications
27 inch in-line gun, 110˚
Sound output:
Two speakers, 1W, 8 ohm
deflection tube
Television system :
NTSC-M
Closed Caption system : §15.119/FCC
O ther Specifications
Video Heads :
Tape width :
Tape speeds
SP :
Rotary four-head
1/2 inch
Terminals
Antenna In:
VHF/UHF/Cable TV
75 ohm unbalanced (F-type)
33.40 mm/sec.
16.67 mm/sec.
11.12 mm/sec.
Video In:
one RCA connector
LP :
SLP :
Audio L/R In:
Headphone:
Coaxial Digital
Audio Out:
two RCA connectors
1/8” stereo (3.5 mm)
Tuner channels
VHF Low :
VHF High :
UHF :
2-6
7-13
14-69
One pin jack,
500m Vpp (75 ohm)
Audio L/R Out :
Operating
two RCA connectors
Cable TV
VHF :
temperature:
5ºC to 40ºC
(41ºF-104ºF)
5A
MID band :
SUPER band :
HYPER band :
A5-A1, A-I
J-W
W+1-W+84
Power requirements: AC 120V, 60Hz
Power consumption
(Maximum):
125W
Dimensions:
Height: 25-1/2” (648 mm)
Width: 26-9/16” (675 mm)
Depth: 19-11/16” (500 mm)
86 lbs (39 kg)
General DVD
Output signal format: NTSC Color System
Frequency response output jack
DVD (linear sound): 20 Hz to 22 kHz
(sample rate: 48 kHz)
Weight:
Accessories:
Remote Control with two
AA batteries
Owner’s Manual
20 Hz to 44 kHz
(sample rate: 96 kHz)
Audio CD:
20 Hz to 20 kHz
Signal-to-noise ratio output jack
Audio CD:
100 dB (EIAJ)
Dynamic range output jack
DVD (linear sound): 85 dB
Audio CD:
84 dB (EIAJ)
Total distortion factor
Audio CD:
0.07% (EIAJ)
Wow and flutter:
Below the measurement
limitation (+/-0.001%
W PEAK) (EIAJ)
Designs and specifications are subject to change without notice and without our legal obligation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty 75
TV/VCR/DVD COMBINATION
90 Days Free Labor/One Year Parts Exchange
This product can be repaired in-home.
WHO IS COVERED?
attempt to provide service (although there may be a
You must have proof of purchase to receive warranty delay if the appropriate spare parts and technical
service. A sales receipt or other document showing
that you purchased the product is considered proof
of purchase.
manual(s) are not readily available).
MAKE SURE YOU KEEP...
Please keep your sales receipt or other document
showing proof of purchase. Attach it to this owner’s
manual and keep both nearby. Also keep the original
box and packing material in case you need to return
your product.
WHAT IS COVERED?
Warranty coverage begins the day you buy your
product. For 90 days thereafter, all parts will be
repaired or replaced free, and labor is free. From 90
days to one year from the day of purchase, all parts
will be repaired or replaced free, but you pay for all
labor charges. After one year from the day of pur-
chase, you pay for the replacement or repair of all
parts, and for all labor charges.
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting
service. Adjustments of the controls discussed there
may save you a service call.
All parts, including repaired and replaced parts, are
covered only for the original warranty period. When
the warranty on the product expires, the warranty on
all replaced and repaired parts also expires.
TO GET WARRANTY SERVICE IN U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Take the product to a Magnavox factory service cen-
ter (see enclosed list) or authorized service center
for repair. When the product has been repaired, you
must pick up the unit at the center. Centers may
keep defective parts.
(In U.S.A., Puerto Rico, and U.S. Virgin Islands, all
implied warranties, including implied warranties of
merchantability and fitness for a particular purpose,
are limited in duration to the duration of this express
warranty. But, because some states do not allow limi-
tations on how long an implied warranty may last,
this limitation may not apply to you.)
WHAT IS EXCLUDED?
Your warranty does not cover:
• labor charges for installation or setup of the prod-
uct, adjustment of customer controls on the prod-
uct, and installation or repair of antenna systems
outside of the product.
• product repair and/or part replacement because of
misuse, accident, unauthorized repair or other
cause not within the control of Magnavox.
• reception problems caused by signal conditions or
cable or antenna systems outside the unit.
• a product that requires modification or adaptation
to enable it to operate in any country other than
the country for which it was designed, manufac-
tured, approved and/or authorized, or repair of
products damaged by these modifications.
• incidental or consequential damages resulting from
the product. (Some states do not allow the exclu-
sion of incidental or consequential damages, so the
above exclusion may not apply to you. This
includes, but is not limited to, prerecorded materi-
al, whether copyrighted or not copyrighted.)
• damage caused by the use of non-VHS tapes or
tapes that have not been tested and labeled for
use in two, four, six, and eight hour VHS
recorders.
TO GET WARRANTY SERVICE IN CANADA...
Please contact Magnavox at:
1-800-705-2000.
(In Canada, this warranty is given in lieu of all other
warranties. No other warranties are expressed or
implied, including any implied warranties of mer-
chantability or fitness for a particular purpose.
Magnavox is not liable under any circumstances for
any direct, indirect, special, incidental or consequen-
tial damages, howsoever incurred, even if notified of
the possibility of such damages.)
REMEMBER...
Please record below the model and serial numbers
found on the product. Also, please fill out and mail
your warranty registration card promptly. It will be
easier for us to notify you if necessary.
• a product that is used for commercial or institu-
tional purposes.
MODEL # __________________________________
SERIAL # __________________________________
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where
the product is officially distributed by Magnavox. In
countries where Magnavox does not distribute the
product, the local Magnavox service organization will
This warranty gives you specific legal rights. You may have
other rights which vary from state to state.
Magnavox, P.O . Box 520890, Miam i, FL 33152 (402) 536-4171
EL6543E001 / 01-03
Download from Www.Somanuals.com. All Manuals Search And Download.
76 Index
a-b repeat . . . . . . . . . . . . . . . . . .54 headphone jack . . . . . . . . . . . . . .16 repeat a-b button . . . . . . . . .15, 54
angle button . . . . . . . . . . . . . .15, 56 helpful hints . . . . . . . . . . . . . .72-73 repeat play . . . . . . . . . . . . . . .32, 54
ant(enna) jack . . . . . . . . . . . .8-9, 17 hookups . . . . . . . . . . . . . . .8-10, 27 rerecording . . . . . . . . . . . . . . . . .27
arrow buttons . . . . . . . . . . . . . . .14
resuming play . . . . . . . . . . . . . . . .53
audio button . . . . . . . . . . . . .15, 60 language (dvd) . . . . . . . . . . . . .66-67 return button . . . . . . . . . . . . . . .14
audio cd . . . . . . . . . . . . . . . . . . . . .6 language (setup menus) . . . . . . . .18 reverse searching . . . . . . . . . .37, 49
audio in/out jacks . .9-10, 16-17, 27 language settings . . . . . . . . . . .66-67 rewind/reverse buttons15-16, 37, 49
audio settings (dvd) . . . . . . . . . . .65 line input mode
auto return . . . . . . . . . . . . . . . . .31 (auxiliary) . . . . . . . . .8-9, 11, 27-28 safety precautions . . . . . . . . . . . . .3
automatic rewind, eject . . . . . . . .38 lp (long play) . . . . . . . . . .25, 37, 71 search mode button15, 50-52, 55, 63
rf coaxial cable . . . . . . . . . . . . . . . .8
auxiliary mode (aux) .8-9, 11, 27-28
searching . . . . . . . . . . . . . . . .37, 49
menus . . . . . . . . . . . . . . . .5, 18, 48 second audio program . . . . . .45, 47
batteries . . . . . . . . . . . . . . . . . . . . .7 mode button . . . . . . .15, 61, 64, 70 select button . . . . . . . . . . . . .13-14
black level . . . . . . . . . . . . . . . . . .70 mp3 display information . . . . . . .63 setup button . . . . . . . . . . . . . .5, 15
brightness . . . . . . . . . . . . . . . . . .24 mp3 playback . . . . . . . . . . . . . . . .62 sharpness . . . . . . . . . . . . . . . . . . .24
mp3 track selection . . . . . . . . . . .63 sleep button . . . . . . . . . . . . . .14, 40
c.reset button . . . . . . . . .15, 30, 34 mts system . . . . . . . . . . . . . . .45-47 sleep timer . . . . . . . . . . . . . . . . . .40
camera angle . . . . . . . . . . . . . . . .56 mute button . . . . . . . . . . . . . . . .15 slow motion . . . . . . . . . . . . . .37, 57
cassette compartment . . . . . . . . .16
channel
slp (super long play) . . . . .25, 37, 71
number buttons . . . . . . . . . . . . . .14 sp (standard play) . . . . . . .25, 37, 71
specifications . . . . . . . . . . . . . . . .74
above 100 . . . . . . . . . . . . . . . .14
adding/deleting . . . . . . . . . . . .19 on-screen status displays . . . .24, 69 speed button . . . . . . . . . .15, 25-27
setup . . . . . . . . . . . . . . . . . . . .18 one-touch recording . . . . . . . . . .26 status display . . . . . . . . . . . . .24, 69
o/p buttons . . . . . . . .15-16, 38 open/close button A . . . . . . . . . .16 stereo broadcast recording . .45-47
chapters . . . . . . . . . . . . . . . . . . . .50 output button . . . . . . . . . . . . . . .16 still picture . . . . . . . . . . . . . . .37, 53
clear button . . . . . . . . . . .15, 51, 61
stop C button . . . . . . . . . . . . . . .14
clock setting . . . . . . . . . . . . . .20-22 parental controls . . . . . . . . . .58-59 stop/eject CA button . . . . . .12, 16
closed captions . . . . . . . . . . . . . .39 password . . . . . . . . . . . . . . . . . . .58 subtitle button . . . . . . . . . . . .15, 56
coaxial digital audio out jack .10, 17 (pause) k button .14, 25, 37, 53, 57 super high speed searching . . . . .37
color . . . . . . . . . . . . . . . . . . . . . .24 picture controls . . . . . . . . . . . . . .24
connections . . . . . . . . . . . .8-10, 27 picture button . . . . . . . . . . . .14, 24 table of contents . . . . . . . . . . . . . .4
contents, table of . . . . . . . . . . . . . .4 play B button . . . . . . . . .12-14, 16 tape duplication . . . . . . . . . . . . . .27
contrast . . . . . . . . . . . . . . . . . . . .24 playing discs . . . . . . . . . . . . . . . . .13 tape eject . . . . . . . . . . . . .16, 38, 73
controls
playing videotapes . . . . . . . . . . . .12 tape speed . . . . . . . . . . . . . . .25, 71
remote . . . . . . . . . . . . . . . .14-15 power button . . . .11, 13, 14, 16, 29 time search . . . . . . . . . . . . . . . . .35
tv/vcr/dvd . . . . . . . . . . . . . . . .16 power cord . . . . . . . . . . . . . . .9, 17 time setting . . . . . . . . . . . . . . .20-22
copyright protection . . . . . . . .3, 27 programs . . . . . . . . . . . . . . . .61, 64 timer recording
counter . . . . . . . . . . . . . . . . .24, 34
cancelling . . . . . . . . . . . . . . . . .30
checking . . . . . . . . . . . . . . . . .30
setting . . . . . . . . . . . . . . . .28-30
random playback . . . . . . . . . .61, 64
daylight-savings time . . . . . . . . . .23 ratings
disc tray . . . . . . . . . . . . . . . . .13, 16
disc menu button . . . . . . . . . .15, 48
mpaa . . . . . . . . . . . . . . . . . . . .43 tint . . . . . . . . . . . . . . . . . . . . . . . .24
tv . . . . . . . . . . . . . . . . . . . .41-42 title button . . . . . . . . . . . . . . .14, 48
display button . . . . . . . . .14, 24, 69 real-time tape counter . . . . . .24, 34 titles . . . . . . . . . . . . . . . . . . . .48, 50
display settings . . . . . . . . . . . . . . .68 rear panel . . . . . . . . . . . . . . . . . .17 tracking . . . . . . . . . . . . . . . . . . . .38
duplication . . . . . . . . . . . . . . . . . .27 record button . . . . . . . . . . . .14, 25 tracks . . . . . . . . . . . . . . . . . . . . . .52
dvd light . . . . . . . . . . . . . . . . . . . .16 recording
trusurround . . . . . . . . . . . . . . . . .70
dvd video . . . . . . . . . . . . . . . . . . . .6
basic . . . . . . . . . . . . . . . . . . . .25
one-touch . . . . . . . . . . . . . . . .26 vcr/tv light . . . . . . . . . . . . . . . . . .16
timer . . . . . . . . . . . . . . . . .28-30 v-chip setup . . . . . . . . . . . . . .41-44
ejecting a tape . . . . . . . . . . . . . . .73
enter button . . . . . . . .14, 65-68, 70 rec/otr button . . . . . . . . . . . .16, 26 video in/out jacks . . . . . . . .9, 27, 71
rec/otr light . . . . . . . . . . . . . . . . .16 volume G/G buttons . . . . . . .15-16
fast forward search . . . . . . . .37, 49 remote control
forward buttons . . . . .14, 16, 37, 49
front panel . . . . . . . . . . . . . . . . . .16
buttons . . . . . . . . . . . . . . .14-15 warranty . . . . . . . . . . . . . . . . . . .75
using . . . . . . . . . . . . . . . . . . . . .7
remote sensor . . . . . . . . . . . . . . .16 zero return . . . . . . . . . . . . . . . . .34
glossary . . . . . . . . . . . . . . . . . . . .71 repeat button . . . . . . . . . . . . .14, 54 zoom button . . . . . . . . . . . . .15, 57
IB8392E002
Printed In Malaysia
This owner’s manual is made of recycled paper.
0EMN02052 / TD603UD * * * *
Download from Www.Somanuals.com. All Manuals Search And Download.
|