®
A Division of Cisco Systems, Inc.
2.4GHz
802.11g
Wireless-G
Presentation Player
User Guide
WIRELESS
Model No.
WPG54G
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Table of Contents
Chapter 1: Introduction
1
1
Welcome
What’s in this Guide?
2
Chapter 2: Planning your Wireless Network
4
4
Network Topology
Roaming
Network Layout
4
5
Chapter 3: Getting to Know the Presentation Player
6
6
Overview
The Back Panel
6
The Front Panel
Remote Control
7
8
Chapter 4: Connecting the Presentation Player
9
9
Overview
Hardware Installation
Placement Options
Chapter 5: Installing the Presentation Player’s Setup Utility
9
12
13
13
16
16
16
16
19
20
21
22
22
25
25
27
27
27
Installation
Chapter 6: Configuring the Presentation Player with the Web-Based Utility
Overview
How to Access the Web-based Utility
The Setup Tab
The Administration Tab
The Status Tab
The Help Tab
Chapter 7: The Control Utility
Using the Control Utility
Chapter 8: Using the Remote Display Presentation Utility
Remote Display
Chapter 9: Using a USB Memory Disk to Install Files
Overview
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Conversion
29
31
31
31
34
34
34
37
Appendix A: Troubleshooting
Common Problems and Solutions
Frequently Asked Questions
Appendix B: Wireless Security
Security Precautions
Security Threats Facing Wireless Networks
Appendix C: Upgrading Firmware
Appendix D: Windows Help
Appendix E: Glossary
Appendix F: Specifications
Appendix G: Warranty Information
Appendix H: Regulatory Information
Appendix I: Contact Information
38
39
45
46
47
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
List of Figures
Figure 3-1: Back Panel
6
7
Figure 3-2: Front Panel
Figure 3-3: Remote Control
Figure 4-1: Monitor/Projector Connection
Figure 4-2: Power Connection
Figure 4-3: LAN Connection
Figure 4-4: Horizontal Placement
Figure 4-5: Vertical Placement
Figure 5-1: Welcome
Figure 5-2: Software License Agreement
Figure 5-3: Destination Location
Figure 5-4: Installing Files
Figure 5-5: Congratulations
Figure 6-1: Password Screen
Figure 6-2: Setup Tab
8
9
10
11
12
12
13
13
14
14
15
16
17
18
19
20
21
22
22
22
23
23
24
25
25
26
26
27
Figure 6-3: WEP Settings
Figure 6-4: Administration Tab
Figure 6-5: Status Tab
Figure 6-6: Help Tab
Figure 7-1: Icon
Figure 7-2: Welcome
Figure 7-3: Presentation Player
Figure 7-4: Presentation Options
Figure 7-5: Upload a Presentation to the Player
Figure 7-6: Browse for your File
Figure 8-1: Welcome
Figure 8-2: Remote Users
Figure 8-3: Presentation List
Figure 8-4: System Info
Figure 9-1: Welcome
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Figure 9-2: Software License Agreement
Figure 9-3: Destination Location
Figure 9-4: Installing Files
Figure 9-5: Congratulations
Figure 9-6: Linksys Presentation Converter Icon
Figure 9-7: Convert your File
27
28
28
29
29
30
37
Figure C-1: Upgrade Firmware
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Chapter 1: Introduction
Welcome
Thank you for choosing the Wireless-G Presentation Player. This Presentation Player will allow you to play your
presentations wirelessly better than ever.
The versatile Linksys Wireless-G Presentation Player is the ultimate presentation tool. In the conference room, it
can act as a 54Mbps access point to your network, and also connects via a standard VGA connector to your
projector or monitor. Any wireless-equipped computer within range (and with permission) can take control of the
Player and project live screen images of any application running on the PC. Give presentations, review the
numbers in your spreadsheets, and collaboratively edit documents at up to 1024x768 resolution and 24-bit color.
For truly interactive meetings and brainstorming sessions, the Player allows any member of the wired or wireless
network group to take instant control of the projector, with no cable-swapping hassle. Go around the room for
status reports, or let the inspiration flow in an ad-hoc idea exchange. In a classroom setting, the Player allows a
teacher to unobtrusively supervise each students' progress without physically peeking over their shoulders.
The Wireless-G Presentation Player can also act as a stand-alone presentation device. Using the included utility,
upload your PowerPoint® presentations directly into the Player's 32 megabyte non-volatile memory or to your
own USB Memory Disk. Then leave your PC at home! Take the Player to the boardroom or your customer's site,
plug it into a projector or monitor, and run your presentation directly from the Player using the included infrared
wireless remote. It even includes a built-in laser pointer to help you hit the highlights.
As a wireless interactive meeting facilitator or as a stand-alone presentation tool, the Linksys Wireless-G
Presentation Player helps you get your point across.
Chapter 1: Introduction
Welcome
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
What’s in this Guide?
This user guide covers the steps for setting up and using theWireless-G Presentation Player.
•
•
•
•
•
•
•
•
•
•
Chapter 1: Introduction
This chapter describes the Wireless-G Presentation Player’s applications and this User Guide.
Chapter 2: Planning Your Wireless Network
This chapter discusses a few of the basics about wireless networking.
Chapter 3: Getting to Know theWireless-G Presentation Player
This chapter describes the physical features of the Wireless-G Presentation Player.
Chapter 4: Connecting the Presentation Player
This chapter shows you how to connect the Wireless-G Presentation Player to your network.
Chapter 5: Installing the Presentation Player’s Setup Utility
This chapter instructs you on how to set up the Wireless-G Presentation Player wih the Setup Utility.
Chapter 6: Configuring the Presentation Player with the Web-Based Utility
This chapter show you how to use the Wireless-G Presentation Player’s web-based utility to configure it.
Chapter 7: The Control Utility
This chapter describes how to upload a presentation using the control utility.
Chapter 8: Using the Remote Display Presentation Utility
This chapter describes how to use the Player to give a presentation without an attached PC.
Chapter 9: Using the USB Memory Disk
This chapter describes how to install a presentation on the Player using a USB memory disk device.
Appendix A: Troubleshooting
This appendix describes some potential problems and solutions, as well as frequently asked questions,
regarding installation and use of the Wireless-G Presentation Player.
•
•
Appendix B: Wireless Security
This appendix discusses security issues regarding wireless networking and measures you can take to help
protect your wireless network.
Appendix C: Upgrading Firmware
This appendix provides instructions for how to upgrade the firmware.
Chapter 1: Introduction
What’s in this Guide?
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
•
Appendix D: Windows Help
This appendix describes how you can use Windows Help for instructions about networking, such as installing
the TCP/IP protocol.
•
•
•
•
•
Appendix E: Glossary
This appendix gives a brief glossary of terms frequently used in networking.
Appendix F: Specifications
This appendix provides the Wireless-G Presentation Player’s technical specifications.
Appendix G: Warranty Information
This appendix supplies the Wireless-G Presentation Player’s warranty information.
Appendix H: Regulatory Information
This appendix supplies the Wireless-G Presentation Player’s regulatory information.
Appendix I: Contact Information
This appendix provides contact information for a variety of Linksys resources, including Technical Support.
Chapter 1: Introduction
What’s in this Guide?
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Chapter 2: Planning your Wireless Network
Network Topology
A wireless network is a group of computers, each equipped with one wireless adapter. Computers in a wireless
network must be configured to share the same radio channel. Several PCs equipped with wireless cards or
adapters can communicate with one another to form an ad-hoc network.
ad-hoc: a group of wireless devices
communicating directly with each other (peer-
to-peer) without the use of an access point.
Linksys wireless adapters also provide users access to a wired network when using an access point or wireless
router. An integrated wireless and wired network is called an infrastructure network. Each wireless PC in an
infrastructure network can talk to any computer in a wired network infrastructure via the access point or wireless
router.
infrastructure: a wireless network
that is bridged to a wired network via
an access point.
An infrastructure configuration extends the accessibility of a wireless PC to a wired network, and can double the
effective wireless transmission range for two wireless adapter PCs. Since an access point is able to forward data
within a network, the effective transmission range in an infrastructure network can be doubled.
Roaming
Infrastructure mode also supports roaming capabilities for mobile users. Roaming means that you can move your
wireless PC within your network and the access points will pick up the wireless PC's signal, providing that they
both share the same channel and SSID.
Before enabling you consider roaming, choose a feasible radio channel and optimum access point position.
Proper access point positioning combined with a clear radio signal will greatly enhance performance.
Chapter 2: Planning your Wireless Network
Network Topology
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Network Layout
Linksys wireless access points and wireless routers have been designed for use with 802.11a, 802.11b, and
802.11g products. With 802.11g products communicating with the 802.11b standard and some products
incorporating both “a” and “g”, products using these standards can communicate with each other.
Access points and wireless routers are compatible with 802.11a, 802.11b and 802.11g adapters, such at the PC
Cards for your laptop computers, PCI Card for your desktop PC, and USB Adapters for when you want to enjoy
USB connectivity. Wireless products will also communicate with the wireless PrintServer.
When you wish to connect your wired network with your wireless network, network ports on access points and
wireless routers can be connected to any of Linksys's switches or routers.
With these, and many other, Linksys products, your networking options are limitless. Go to the Linksys website at
Chapter 2: Planning your Wireless Network
Network Layout
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Chapter 3: Getting to Know the Presentation Player
Overview
This chapter describes what is on the back and front panels of the Presentation Player, and the remote control.
The Back Panel
The Presentation Player's ports, where a network cable is connected, and the reset button are located on the
back panel. See Figure 3-1.
USB
The USB port is where you will connect the USB memory disk device.
Monitor/Projector The Monitor/Projector port is where you will connect the VGA cable from the monitor or
projector where your presentation will be displayed.
LAN
This LAN (Local Area Network) port connects to Ethernet network devices, such as a
switch or router.
Power
The Power port is where you will connect the power adapter.
Reset Button
There are two ways to reset the Presentation Player's factory defaults. Either press the
Reset Button, for approximately ten seconds, or restore the defaults from the
Administration tab in the Presentation Player's Web-based Utility.
With these, and many other, Linksys products, your networking options are limitless. Go to the Linksys website at
Important: Resetting the Presentation Player will erase
all of your settings (WEP Encryption, Wireless and LAN
settings, etc.) and replace them with the factory default
settings. Do not reset the Presentation Player if you want
to retain these settings.
Figure 3-1: Back Panel
Chapter 3: Getting to Know the Presentation Player
Overview
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
The Front Panel
The Presentation Player's LEDs, where information about network activity is displayed, the infrared sensor, and
the power switch are located on the front panel.
Infrared
Sensor
LEDs
Power
Green. The Power LED lights up when the Presentation Player is powered on.
Wireless-G
Green. The Wireless-G LED lights whenever there is a successful wireless connection. If the
Wireless-G LED is flickering, the Presentation Player is actively sending or receiving data to or
from one of the devices on the network.
LAN
USB
Green. The LAN LED serves two purposes. If the LED is continuously lit, the Presentation Player
is successfully connected to a device through the LAN port. If the LED is flickering, it is an
indication of any network activity.
Green. The USB LED lights whenever there is a successful USB connection.
Infrared
The infrared sensor is where you point the remote control of the Presentation Player.
Power Switch The Power Switch is where you will turn the Presentation Player on and off.
On/Off
Button
Figure 3-2: Front Panel
Chapter 3: Getting to Know the Presentation Player
The Front Panel
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Remote Control
Stop
Use to stop your presentation or connection.
Play
Use to start your presentation from the Presentation List.
Use for the laser pointer.
Pointer
Connect
List
Use to connect a new user to the Player while in the Presentation List.
Takes you to the Presentation List.
Home
Info
Takes you to the Home page.
Shows the system information for the Player: the identification, network settings,
and wireless LAN configuration.
User
Shows a list of the connected remote users by using the names of their computers.
Goes back to the previous slide.
Back
Figure 3-3: Remote Control
Center Round Button
Left and Right Buttons
Use like a mouse pad to move the cursor on the screen.
Use like you would use left and right mouse buttons. Also acts as Next and Previous
slide buttons when in the Presentation List.
Delete
Use to delete your presentation from the Player.
Use to navigate left and right when in the Presentation List.
Use to navigate up and down.
Left and Right Arrows
Up and Down Arrows
Mode
Toggles between high and low resolutions.
Chapter 3: Getting to Know the Presentation Player
Remote Control
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Chapter 4: Connecting the Presentation Player
Overview
This chapter explains how to connect the necessary cables to use the Player, and how to attach the stand if you
wish to use it.
Hardware Installation
1. Connect the VGA cable from your monitor or projector to the Presentation Player’s Monitor/Projector port.
Figure 4-1: Monitor/Projector Connection
Chapter 4: Connecting the Presentation Player
Overview
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
2. Make sure that the Presentation Player is turned off. Plug the supplied power adapter into the Power port on
the Presentation Player’s back panel. Then, plug the other end into a power outlet (surge protection
recommended). Turn on the Presentation Player.
IMPORTANT: Make sure to only use the power adapter that is supplied with
the Presentation Player. Use of a different adapter can damage the product.
Figure 4-2: Power Connection
Chapter 4: Connecting the Presentation Player
Hardware Installation
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
3. To have a wired connection, connect one end of the Category 5 Ethernet network cable to your PC’s Ethernet
adapter. Connect the other end to the Ethernet port on the back of the Presentation Player.
4. For a wireless connection, fix the direction of the antenna. Place the antenna perpendicular to the ground.
5. Place the Player near the monitor or projector facing the presenters so that the infra red in the remote control
will be in line of sight to the Player.
Figure 4-3: LAN Connection
Chapter 4: Connecting the Presentation Player
Hardware Installation
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Placement Options
There are two ways to place the Player. You can place the Player horizontally on a surface, as shown in Figure 6-
1. (If necessary, adjust the antenna so that it points straight up in the air.) The second way is to stand the Player
vertically on a surface. If you want to install the stand, refer to the instructions below.
Installing the Stand for Vertical Placement
1. The Player includes four triangular stands. The Player has eight rubber inserts, four on each side.
2. Remove the two rubber inserts that are adjacent to the power port. Insert a stand into an opening, then push
it up to snap it into place. Then, insert a stand into the other opening, and push it up to snap it into place.
Figure 4-4: Horizontal Placement
3. Repeat step 2 for the LED side of the Player.
4. Place the Player in an appropriate location.
5. If necessary, adjust the antenna so that it points straight up in the air. (See Figure 6-2.)
Power Port
Stand
Rubber Insert
Figure 4-5: Vertical Placement
Chapter 4: Connecting the Presentation Player
Placement Options
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Chapter 5: Setting up the Presentation Player
Installation
The Presentation Player can play from any PC in your wireless network, but you will first need to install this utility
in each PC that will be used with the Presentation Player – once installed, it will not need to be done again.
1. Insert the Setup CD-ROM into your CD-ROM drive. The CD’s Wizard should start automatically and the
Welcome page for the Setup Utility will appear (as shown in Figure 5-1).
If it does not start automatically, click the Start button, select Run, and enter d:\setup.exe (where “d” is the
letter of your CD-ROM drive) in the Open field to start the autorun program.
On the Welcome page, click the Setup tab to start the installation procedure and place the Control Utility on
your current PC.
Click the User Guide tab to use this User Guide. Click the Exit tab to close the Setup Utility.
2. A screen like that shown in Figure 5-2 will appear.
Figure 5-1: Welcome
Read the license agreement and click the Yes tab to accept the terms and continue the installation procedure.
If you click No, you will end the installation procedure.
Figure 5-2: Software License Agreement
Chapter 5: Setting up the Presentation Player
Installation
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
3. The next screen, like that shown in Figure 5-3, will allow you to choose where the Setup Utility will install the
Control Utility and the Presentation Converter. By default, the destination folder is C:\Program
Files\Linksys\Wireless-G Presentation Player.
If you want to change the location, click the Browse tab and select another destination for the installation.
Click the Next tab to continue. Click the Back button to return to the previous screen. Click the Exit tab if you
want to end the Setup Utility.
4. The wizard will now be ready to begin copying the program files. Review the screen shown in Figure 5-4.
Click the Exit tab if you want to end the Setup Utility.
Figure 5-3: Destination Location
Figure 5-4: Installing Files
Chapter 5: Setting up the Presentation Player
Installation
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
5. When you see this screen, the installation of the Setup Utility onto your computer has been completed.
Click the Exit tab to exit the Setup Utility now or click the Online Registration tab to register your product
online.
Figure 5-5: Congratulations
Chapter 5: Setting up the Presentation Player
Installation
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Chapter 6: Configuring the Presentation Player with the
Web-Based Utility
Overview
The Presentation Player has been designed to function with the default settings in the Setup Utility. However, if
you’d like to change these settings, the Presentation Player can be configured through your web browser with the
Web-Based Utility. This chapter explains how to configure the Presentation Player. The Utility contains these four
tabs: Setup, administration, Status, and Help.
How to Access the Web-based Utility
To access the Web-based Utility, you will need the Presentation Player’s IP Address. To find the Player’s IP
Figure 6-1: Password Screen
Address, make sure that the Presentation Player is connected to the projector or monitor and that both devices
are powered on. Open your web browser and enter the Player’s IP Address in the Address field. The default IP
Address is 192.168.1.200. Press the Enter key.
Note: The Presentation Player is designed to function
properly after using the Setup Wizard. This chapter is
provided for those who wish to perform more
advanced configuration or monitoring.
A password request screen, shown in Figure 6-1, will appear. The first time you open the Web-Based Utility, enter
the default password admin into the Password field. Click the OK button. You can later set a new password
using the Administration tab, as shown in Figure 6-4.
The Setup Tab
The Setup tab, as shown in Figure 6-2, has your available basic setup functions. Most users can use the default
settings, but you can change them here if you want. Your network and wireless security functions are located
here.
firmware: the programming code that runs a
networking device
Firmware Version - This field displays the current firmware version of the Presentation Player. Firmware
upgrades, when available, may be downloaded from the Linksys web site at no charge. If you are not
experiencing any problems with the Presentation Player, you should not upgrade the firmware. Make sure to
review the release notes of any firmware version before attempting an upgrade.
MAC (Media Access Control) Address:the
unique address that a manufacturer assigns to
each networking device
Player Name - This is a common name that you assign to the Presentation Player. This field is limited to 32
characters. By default, four alphanumeric characters follow the device name. These represent the last four
characters of the Presentation Player's MAC (Ethernet) address. The MAC address is printed on the bottom of the
Chapter 6: Configuring the Presentation Player with the Web-Based Utility
Overview
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Presentation Player. Assigning unique and memorable names is helpful, especially if you are using multiple
Presentation devices on the same network.
Network Settings
•
•
MAC Address. The MAC Address of the wired (LAN) network is displayed.
IP Address Settings. This is the Internet Protocol Address that is assigned to the Presentation Player. Click
Obtain an IP Address Automatically or Set Static IP Manually. Choose Obtain an IP Address Automatically
to allow your Presentation Player to automatically obtain a dynamic IP address from a DHCP server. Or,
choose Set Static IP Manually where you will assign all the devices a permanent IP Address and enter the
fixed IP address in the fields provided. Then, enter the Subnet Mask into the fields provided. No DHCP
changes will take effect until the Presentation Player has been powered down and powered up again. The IP
Address will only be used to remotely configure or control the Presentation Player. You do not need to
reconfigure it if you are traveling to remote locations and plan to use the hand-held remote control.
Figure 6-2: Setup Tab
•
DHCP Server Settings. If you are using a DHCP server, select Enabled from the drop-down menu. Enter the
Start IP Address in the field. Then, enter the number of users in the field. The IP Address range will be
displayed.
static ip address: a fixed address assigned to
a computer or device connected to a network
Wireless Settings
•
•
•
MAC Address.The MAC Address of the wireless network is displayed.
Mode. Choose your network mode from the drop-down menu. Select Wireless-G, Wireless-B, or Mixed.
SSID. This stands for Service Set IDentifier. The SSID, also called the Network Name, is a unique name that
identifies a wireless network. In order to connect to the Presentation Player, all of your wireless computer's
settings must be identical to the SSID you define here. The SSID is case sensitive, must not exceed 30
characters, including WPG54G-, but may consist of any keyboard character. Make sure that this setting is the
same for all wireless devices communicating with the Presentation Player. You should change the default
SSID of "linksys" to a name that is unique to your network.
•
Channel. Each Access Point and/or Presentation Player on your network should be assigned a unique channel.
The channel is a common number that sets the actual frequency this particular device will use to
communicate with wireless clients. For example, TV and Radio Stations refer to particular channels, which
are actually frequencies at which radio waves are transmitted.
If you experience poor performance, you may have interference from another wireless device. Changing the
channel may eliminate interference and increase performance. Channels 1, 6 and 11 are preferred.
Chapter 6: Configuring the Presentation Player with the Web-Based Utility
The Setup Tab
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
•
WEP Encryption. Wired Equivalent Privacy (WEP) is an encryption method used to protect your wireless
communications and prevent unauthorized access to the Presentation Player and/or your network.
WEP uses 64-bit or 128-bit keys to provide access control to your network and encryption security for every
data transmission. To decode data transmissions, all devices in a network must use an identical WEP key.
Higher encryption levels offer higher levels of security, but due to the complexity of the encryption, they may
decrease network performance. To enable WEP encryption, click the Enabled radio button. Then click the
WEP Key Setting button to configure the WEP settings. To disable WEP encryption, keep the default setting,
Disabled.
•
•
•
Default Transmit Key. Select which WEP key (1-4) will be used when the Router sends data. Make sure the
receiving device is using the same key.
WEP Encryption. Select the level of WEP encryption you wish to use, 64-bit 10 hex digits or 128-bit 26 hex
digits.
Passphrase. Instead of manually entering WEP keys, you can enter a Passphrase. This Passphrase is used to
generate one or more WEP keys. It is case-sensitive and should not be longer than 16 alphanumeric
characters. (This Passphrase function is compatible with Linksys wireless products only. If you want to
communicate with non-Linksys wireless products, enter the WEP key manually on the non-Linksys wireless
products.) After you enter the Passphrase, click the Generate button to create WEP keys.
Figure 6-3: WEP Settings
•
Keys 1-4. WEP keys enable you to create an encryption scheme for wireless network transmissions. If you are
not using a Passphrase, then manually enter a set of values. (Do not leave a key field blank, and do not enter
all zeros, because they are invalid key values.)
If you are using 64-bit WEP encryption, then the key must be exactly 10 hexadecimal characters in length. If
you are using 128-bit WEP encryption, then the key must be exactly 26 hexadecimal characters in length.
Valid hexadecimal characters are “0”-“9” and “A”-“F”.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
Chapter 6: Configuring the Presentation Player with the Web-Based Utility
The Setup Tab
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
The Administration Tab
The Administration tab, as shown in Figure 6-4, is where you change your password, restore the factory default
settings, and upgrade the firmware for the Presentation Player.
Player Password
Choose an alphnumeric password between 4 and 16 characters and without spaces. Enter the password into the
Password field, then repeat it in the Re-type Password field.
Restore Factory Defaults
If you need to clear all of the settings on the Presentation Player and restore them to the factory default settings,
click the Yes button. Then, click the Apply button.
Firmware Upgrade
Figure 6-4: Administration Tab
The current firmware version will be displayed.
IMPORTANT: Restoring the Presentation Player's
factory default settings will erase all of your settings
(WEP Encryption, Wireless and Network settings,
etc.), and replace them with the factory defaults. Do
not reset the Presentation Player if you want to
retain these settings.
New firmware versions are posted on the support page at the Linksys website and can be downloaded for free,
but do not upgrade your firmware unless you are experiencing problems.
2. Enter the location of the firmware's file or click the Browse button to find the file.
3. Then, click the Upgrade button to upgrade the firmware, and follow the instructions there.
Chapter 6: Configuring the Presentation Player with the Web-Based Utility
The Administration Tab
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
The Status Tab
The Status tab will display the Presentation Player’s current network and wireless settings and activity, and
statistics. It will list the Network Settings: Firmware, Player Name, MAC Address, IP Address, Subnet Mask; the
Wireless Settings: MAC Address, SSID, Channel, and WEP Encryption; Statistics: Network Sent, Network Received
entries display your network’s performance levels.
Figure 6-5: Status Tab
Chapter 6: Configuring the Presentation Player with the Web-Based Utility
The Status Tab
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
The Help Tab
The Help tab (see Figure 6-6) has links to the Linksys Website, Linksys Product Support, then Online User Guide,
and the Adobe Website to download PDF viewing software.
Figure 6-6: Help Tab
Chapter 6: Configuring the Presentation Player with the Web-Based Utility
The Help Tab
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Chapter 7: The Control Utility
Using the Control Utility
Figure 7-1: Icon
The control utility may be used from any wired or wireless notebook or desktop PC with a connection to the
Wireless Presentation Player. It is a good idea to place the Wireless Presentation Player on or near the monitor or
projection area. The Infrared sensor is located on the front panel of the unit and the remote control must be in
line-of-sight of the sensor in order to function properly.
Make sure that the Presentation Player is connected to the projector or monitor and that both devices are
powered on. Click on the WPG54G Presentation Player icon on your desktop. (See Figure 7-1.)
1. The welcome screen will appear first. (See Figure 7-2.) Click Next to continue.
2. On the next screen, select the Presentation Player from the drop-down list. The Players are listed with the last
four digits of their MAC Address. You may change the name of the Player on the Setup tab in the Web-based
Utility in Chapter 6: Configuring the Presentation Player Using the Web-based Utility. Click Next to continue.
Figure 7-2: Welcome
IMPORTANT: Make sure that your PC is
connected to the Ethernet port of the Wireless-G
Presentation Player if you are using a wired
connection. Also, make sure that your PC is set to
the same IP range as the Player.
IMPORTANT: Make sure that your wireless PC
has the same SSID as the Wireless Presentation
Player (default SSID is WPG54G-linksys, If you are
using a wireless connection. Also, make sure that
your PC is set to the same IP range as the Player.
Figure 7-3: Presentation Player
Chapter 7: The Control Utility
Using the Control Utility
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
3. When you see the screen shown in Figure 7-4, you will choose a color setting for your presentation. Select the
default True Color to have the optimum color option. If the action is very slow or your presentation is mostly
text, you may want to select Basic Color. You will still have color, but your speed will increase.
Click the Refresh button.
4. Next, choose your presentation option from the following buttons at the bottom of the screen.
•
Upload Presentation. This option allows you to upload a PowerPoint presentation to the Presentation
Player. Once uploaded, you can display the entire presentation using the hand-held remote control.
While this feature allows great freedom and mobility, please consider the following when uploading a
presentation to the Presentation Player:
Once uploaded, anyone can use the remote control to view the presentation on a monitor, so take
precautions if your presentation contains sensitive or confidential material.
The PC attempting to upload a presentation must have Microsoft PowerPoint 97 or later installed.
Figure 7-4: Presentation Options
Some features, such as animation, hyperlinks, and sound will not be available once your presentation is
uploaded.
The Presentation Player comes with 32Mb of storage for your presentations. This allows enough room for
several presentations. However, be sure to remove your presentations when they are no longer needed to
make room for new files.
•
Take Control of the Presentation Player. This feature allows you to conveniently transfer the contents of
your local PC screen to the projector or monitor that is connected to the Player where the presentation will
be displayed. You may notice some delay in mouse and keyboard function. Such a delay is normal for this
mode of operation. Only one user at a time can control the Presentation Player. The supported display
resolutions are 800 x 600 or 1024 x 768. Please see your Windows documentation for more information
on changing your display settings.
•
•
Give Control to Another User. To pause your presentation or change presenters, click this button.
Exit (Stop). To exit the Control utility, click this button.
5. If you click the Upload Presentation button, the screen in Figure 7-5 will appear. Click the Browse button to
Figure 7-5: Upload a Presentation to the Player
search for your Power Point presentation file.
Chapter 7: The Control Utility
Using the Control Utility
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
The screen in Figure 7-6 will appear. After you find your presentation, select it, then click the Open button. After
you click the Open button, your file will appear in the Browse field of Figure 7-5. Click Upload. Your file will be
automatically converted and loaded onto the Presentation Player.
Figure 7-6: Browse for your File
Chapter 7: The Control Utility
Using the Control Utility
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Chapter 8: Using the Remote Display Presentation Utility
Remote Display
The Presentation Player has a built-in image viewer and internal storage, so you can give a presentation without
an attached PC. All you need to do is load the presentation files onto the system in advance, then you can deliver
a presentation using the remote control. The Player also has a the remote display function to switch users during
a presentation.
1. To load your presentation, go to the Upload Presentation Section of Chapter 5: Using the Presentation Player’s
Web-Based Utility. To learn about the Remote Control, go to The Remote Control’s Buttons in Chapter 2.
2. Make sure that the Presentation Player is connected to the projector or monitor and that both devices are
powered on. The screen in Figure 8-1 will appear. It is referred to as the Home page. If you click on a screen’s
Home button, you will return here.
The three buttons on this screen are described below and in the following paragraphs.
Remote Users. Click this button to view and connect to the remote users. It will list the remote users whose
PCs are connected to the Player. The screen in Figure 8-2 will appear. To use, select a user, then click
Connect to connect the user to the network, click Delete to remove the user from the network, or if finished
Figure 8-1: Welcome
with the presentation and you want to disconnect everyone, click Delete ALL.
Figure 8-2: Remote Users
Chapter 8: Using the Remote Display Presentation Utility
Remote Display
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Presentation List. Click this button to view the list of loaded presentations. The screen in Figure 8-3 will
appear. To use, select a file, then click Play to play the file, click Delete to remove the file from the Player, or
if finished with the presentation and you want to delete all of the loaded files, click Delete ALL.
System Info. Click this button to view the Player’s identification, network settings, and wireless LAN
configuration. (Figure 8-4)
Back. Click this button to go back to the previous screen.
Home. Click this button to go the the Home page.
Figure 8-3: Presentation List
Figure 8-4: System Info
Chapter 8: Using the Remote Display Presentation Utility
Remote Display
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Chapter 9: Using a USB Memory Disk to Install Files
Overview
Before you can use a USB memory disk, you will need to convert your Power Point presentation file. To convert
your file, you must first install the converter software on your PC. If you already installed the Setup Wizard on your
PC, then you already have Presentation Converter installed. After you convert your file, the Presentation Player
will be able to accept the presentation from your USB disk.
Installation
When you use a memory disk device to install your presentation on the Presentation Player, you must first install
the converter software on your PC.
1. Insert the Setup CD-ROM into your CD-ROM drive. The CD’s Wizard should start automatically and the
Welcome page for the Setup Utility will appear (as shown in Figure 9-1).
If it does not start automatically, click the Start button, select Run, and enter d:\setup.exe (where “d” is the
letter of your CD-ROM drive) in the Open field to start the autorun program.
Figure 9-1: Welcome
On the Welcome page, click the Install Presentation Converter for USB Memory Disk tab to start the
installation procedure and install the application on your current PC.
Click the User Guide tab to use this User Guide. Click the Exit tab to close the Setup Utility.
2. Click the Setup tab and the Wizard will begin the installation procedure. A screen like that shown in Figure
9-2 will appear.
Read the license agreement and click the Yes tab to accept the terms and continue the installation procedure.
If you click No, you will end the installation procedure.
Figure 9-2: Software License Agreement
Chapter 9: Using a USB Memory Disk to Install Files
Overview
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
3. The next screen, like that shown in Figure 9-3, will allow you to choose where the Setup Utility will install the
Control Utility and the Presentation Converter. By default, the destination folder is C:\Program
Files\Linksys\Wireless.
If you want to change the location, click the Browse tab and select another destination for the installation.
Click the Next tab to continue.
4. The Wizard will now be ready to begin copying the program files, as shown in Figure 9-4.
Figure 9-3: Destination Location
Figure 9-4: Installing Files
Chapter 9: Using a USB Memory Disk to Install Files
Installation
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
5. When you see the screen in Figure 9-5, the installation of the Presentation Converter application onto your
computer has been completed.
Click the Exit tab to exit the utility now or click the Online Registration tab to register your product online.
Figure 9-5: Congratulations
Conversion
First, plug your USB memory disk device into your PC.
A Linksys Presentation Converter icon will be placed on your desktop after the Presentation Converter
application is installed. Click on the icon shown in Figure 9-6.
Figure 9-6: Linksys Presentation Converter Icon
Chapter 9: Using a USB Memory Disk to Install Files
Conversion
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
The screen in Figure 9-7 will appear. Click the Browse button next to the From field to find your presentation file.
After you locate your file, you may save it to a different location by clicking the Browse button next to the Save to
field.
Click the Convert button to convert the file.
Unplug your USB disk device from the PC and plug it into the Presentation Player. Use the remote control to
browse to find the presentation file.
Figure 9-7: Convert your File
Chapter 9: Using a USB Memory Disk to Install Files
Conversion
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Appendix A: Troubleshooting
This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” This
appendix provides solutions to problems that may occur during the installation and operation of the Wireless-B
Media Adapter. Read the description below to solve your problems. If you can't find an answer here, check the
Common Problems and Solutions
1. Can I run an application from a remote computer over the wireless network?
This will depend on whether or not the application is designed to be used over a network. Consult the
application’s user guide to determine if it supports operation over a network.
2. Can I use the Presentation Player with non-Linksys wireless equipment?
Yes, as long as you use it with wireless equipment that complies with the IEEE 802.11b or 802.11g standard.
3. What IEEE 802.11b features are supported?
The product supports the following IEEE 802.11 functions:
•CSMA/CA plus Acknowledge protocol
•Multi-Channel Roaming
•Automatic Rate Selection
•RTS/CTS feature
•Fragmentation
•Power Management
4. The Presentation Player’s Control Utility cannot detect the Presentation Player.
Verify that the Presentation Player’s power is on and all of your wireless equipment complies with the
802.11g standard and if you are connecting to the Presentation Gateway with a network cable, check the
cable connection to the Presentation Player. Make sure the Presentation Player's IP Address and PC are in the
same range. If you are using a wireless PC to connect, make sure that you are associated to the Presentation
Player and the wireless settings match.
5. Do I need to set my PC to Static IP or Dynamic DHCP to connect to the Presentation Player?
If your PC is set to Obtain an IP Address Automatically when associating/connecting your wireless PC to the
wireless presentation gateway, the Presentation player will assign an IP address to your wireless PC. If your
PC is set to Static IP Address, make sure that your PC's IP Address is in the same range as the Presentation
Player.
Appendix A: Troubleshooting
Common Problems and Solutions
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
6. I have a PowerPoint presentation in my USB disk that is plugged into the Presentation Player, but the
file does not show up on the Player.
You will first need to convert the PowerPoint file before connecting it to the Presentation Player. Use the
Converter Utility to convert the files and save them back to the USB disk. Once complete, unplug the USB disk
from your PC and plug it back into the Presentation Player.
7. I'm playing a video on my PC but when watching on a projector through the Presentation Player, the
video is not smooth.
The presentation player is taking snapshots of your desktop and transmitting to the screen frame by frame.
Therefore, you will see many snapshots.
8. Do I need to convert the PowerPoint presentations using the Presentation Converter before uploading
to the Player?
No, if you are using the Control Utility to upload your PowerPoint presentation, the control utility will
automatically convert the file and upload to your Presentation Player.
9. I cannot find a list of PCs in the Remote Users section on the Presentation Player screen.
Make sure that your PC is connected to the Presentation Player and the Control Utility is installed. You will first
need to take control of the Presentation Player so your PC can show up in the Remote Users list.
10.My SSID always starts with wpg54g - , can I change it to something else?
No, but you can create a unique SSID after the “wpg54g - ". Having the "wpg54g" helps users identify the
unit when mulitple wireless networks are around.
11.I have more than one Presentation Player, so how can I identify which one I am connecting to?
We recommend that you assign a unique player name to each Presentation Player if you have more than one.
This can be done by logging into the web user interface utility of the player and changing the player’s name. If
you are running the control utility and you see mulitple Presentation Players, you can identify them by the last
four digits of the MAC address that is displayed after the player’s name.
12.What is the default IP address on my Wireless-G Presentation Player?
The default IP address is: 192.168.1.200.
13.I want to convert my files on my USB disk, but I don't want to install the control utility.
Insert the CD and install the Converter Utility for the USB Disk instead of the Control Utility.
14.Can more than one PC take control of the Wireless-G Presentation player?
No, the Presentation Player can only be controlled by one PC at a time. If you want to switch between PCs,
click the Give Control to Another User button on the Control Utility of PC 1, and then click Take Control of the
Presentation Player on PC 2.
Appendix A: Troubleshooting
Common Problems and Solutions
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
15.Does the Presentation Player work with a Macintosh operating system?
No, it only works with Windows operating systems 98SE,2000, Me, and XP. You will also need Microsoft
Powerpoint to convert files.
Frequently Asked Questions
What is the IEEE 802.11g standard?
It is one of the IEEE standards for wireless networks. The 802.11g standard allows wireless networking hardware
from different manufacturers to communicate, provided that the hardware complies with the 802.11g standard.
The 802.11g standard states a maximum data transfer rate of 54Mbps and an operating frequency of 2.4GHz.
What is ad-hoc mode?
When a wireless network is set to ad-hoc mode, the wireless-equipped computers are configured to
communicate directly with each other. The ad-hoc wireless network will not communicate with any wired
network.
What is infrastructure mode?
When a wireless network is set to infrastructure mode, the wireless network is configured to communicate with a
wired network through a wireless access point or router.
What is Roaming?
Roaming is the ability of a portable computer user to communicate continuously while moving freely throughout
an area greater than that covered by a single Wireless Network Access Point. Before using the roaming function,
the workstation must make sure that it is the same channel number as the Wireless Network Access Point of the
dedicated coverage area.
To achieve true seamless connectivity, the wireless LAN must incorporate a number of different functions. Each
node and Wireless Network Access Point, for example, must always acknowledge receipt of each message. Each
node must maintain contact with the wireless network even when not actually transmitting data. Achieving these
functions simultaneously requires a dynamic RF networking technology that links Wireless Network Access
Points and nodes. In such a system, the user’s end node undertakes a search for the best possible access to the
system. First, it evaluates such factors as signal strength and quality, as well as the message load currently being
carried by each Wireless Network Access Point and the distance of each Wireless Network Access Point to the
wired backbone. Based on that information, the node next selects the right Wireless Network Access Point and
registers its address. Communications between end node and host computer can then be transmitted up and
down the backbone.
As the user moves on, the end node’s RF transmitter regularly checks the system to determine whether it is in
touch with the original Wireless Network Access Point or whether it should seek a new one. When a node no
Appendix A: Troubleshooting
Frequently Asked Questions
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
longer receives acknowledgment from its original Wireless Network Access Point, it undertakes a new search.
Upon finding a new Wireless Network Access Point, it then re-registers, and the communication process
continues.
What is a BSS ID?
A specific Ad-hoc LAN is called a Basic Service Set (BSS). Computers in a BSS must be configured with the same
BSS ID.
What is an ESS ID?
An Infrastructure configuration could also support roaming capability for mobile workers. More than one BSS can
be configured as an Extended Service Set (ESS). Users within an ESS could roam freely between BSSs while
maintaining a continuous connection to the wireless network stations and Wireless Network Access Points.
What is ISM band?
The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use in the ISM
(Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz, in particular, is being made available
worldwide. This presents a truly revolutionary opportunity to place convenient high speed wireless capabilities in
the hands of users around the globe.
What is Spread Spectrum?
Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in
reliable, secure, mission-critical communications systems. It is designed to trade off bandwidth efficiency for
reliability, integrity, and security. In other words, more bandwidth is consumed than in the case of narrowband
transmission, but the trade-off produces a signal that is, in effect, louder and thus easier to detect, provided that
the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to
the right frequency, a spread-spectrum signal looks like background noise. There are two main alternatives,
Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS).
Appendix A: Troubleshooting
Frequently Asked Questions
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Appendix B: Wireless Security
Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of
Linksys products provide several network security features, but they require specific action on your part for
implementation. So, keep the following in mind whenever you are setting up or using your wireless network.
Security Precautions
The following is a complete list of security precautions to take (at least steps 1 through 5 should be followed):
1. Change the default SSID.
2. Disable SSID Broadcast.
3. Change the default password for the Administrator account.
4. Enable MAC Address Filtering.
Note: Some of these security features are
available only through the network router or
access point. Refer to the router or access
point’s documentation for more information.
5. Change the SSID periodically.
6. Use the highest encryption algorithm possible. Use WPA if it is available. Please note that this may reduce
your network performance.
7. Change the WEP encryption keys periodically.
For information on implementing these security features, refer to “Chapter 5: Configuring the Wireless-B
Broadband Router.”
Security Threats Facing Wireless Networks
Wireless networks are easy to find. Hackers know that in order to join a wireless network, wireless networking
products first listen for “beacon messages”. These messages can be easily decrypted and contain much of the
network’s information, such as the network’s SSID (Service Set Identifier). Here are the steps you can take:
Change the administrator’s password regularly. With every wireless networking device you use, keep in
mind that network settings (SSID, WEP keys, etc.) are stored in its firmware. Your network administrator is the
only person who can change network settings. If a hacker gets a hold of the administrator’s password, he, too,
can change those settings. So, make it harder for a hacker to get that information. Change the administrator’s
password regularly.
Appendix B: Wireless Security
Security Precautions
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
SSID. There are several things to keep in mind about the SSID:
1. Disable Broadcast
2. Make it unique
3. Change it often
Most wireless networking devices will give you the option of broadcasting the SSID. While this option may be
more convenient, it allows anyone to log into your wireless network. This includes hackers. So, don’t broadcast
the SSID.
Wireless networking products come with a default SSID set by the factory. (The Linksys default SSID is “linksys”.)
Hackers know these defaults and can check these against your network. Change your SSID to something unique
and not something related to your company or the networking products you use.
Change your SSID regularly so that any hackers who have gained access to your wireless network will have to
start from the beginning in trying to break in.
MAC Addresses. Enable MAC Address filtering. MAC Address filtering will allow you to provide access to only
those wireless nodes with certain MAC Addresses. This makes it harder for a hacker to access your network with
a random MAC Address.
WEP Encryption. Wired Equivalent Privacy (WEP) is often looked upon as a cure-all for wireless security
concerns. This is overstating WEP’s ability. Again, this can only provide enough security to make a hacker’s job
more difficult.
There are several ways that WEP can be maximized:
1. Use the highest level of encryption possible
2. Use “Shared Key” authentication
Important: Always remember that each
device in your wireless network MUST use
the same encryption method and encryption
key or your wireless network will not function
properly.
3. Change your WEP key regularly
WPA. Wi-Fi Protected Access (WPA) is the newest and best available standard in Wi-Fi security. Two modes are
available: Pre-Shared Key and RADIUS. Pre-Shared Key gives you a choice of two encryption methods: TKIP
(Temporal Key Integrity Protocol), which utilizes a stronger encryption method and incorporates Message
Integrity Code (MIC) to provide protection against hackers, and AES (Advanced Encryption System), which utilizes
a symmetric 128-Bit block data encryption. RADIUS (Remote Authentication Dial-In User Service) utilizes a
RADIUS server for authentication and the use of dynamic TKIP, AES, or WEP.
Appendix B: Wireless Security
Security Threats Facing Wireless Networks
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
WPA Pre-Shared Key. If you do not have a RADIUS server, Select the type of algorithm, TKIP or AES, enter a
password in the Pre-Shared key field of 8-64 characters, and enter a Group Key Renewal period time
between 0 and 99,999 seconds, which instructs the Router or other device how often it should change the
encryption keys.
WPA RADIUS. WPA used in coordination with a RADIUS server. (This should only be used when a RADIUS
server is connected to the Router or other device.) First, select the type of WPA algorithm, TKIP or AES. Enter
the RADIUS server’s IP Address and port number, along with a key shared between the device and the server.
Last, enter a Group Key Renewal period, which instructs the device how often it should change the encryption
keys.
RADIUS. WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is
connected to the Router or other device.) First, enter the RADIUS server’s IP Address and port number, along
with a key shared between the device and the server. Then, select a WEP key and a level of WEP encryption,
and either generate a WEP key through the Passphrase or enter the WEP key manually.
Implementing encryption may have a negative impact on your network’s performance, but if you are transmitting
sensitive data over your network, encryption should be used.
These security recommendations should help keep your mind at ease while you are enjoying the most flexible
and convenient technology Linksys has to offer.
Appendix B: Wireless Security
Security Threats Facing Wireless Networks
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Appendix C: Upgrading Firmware
The Presentation Player functions with the use of firmware, which is the programming written in the unit’s
internal memory. It is this firmware that enables the Presentation Player to function and makes it easy to use.
Occasionally, this firmware will be upgraded, which could increase the Presentation Player’s stability or make it
easier to use. New versions of the firmware can be found on the Linksys web site at www.linksys.com.
The Presentation Player's firmware is upgraded through the Web-Utility's Administration tab. Follow these
instructions:
2. Click the Web-Utility's Administration tab, and the Setup screen, shown in Figure C-1, will appear.
3. Enter the location of the firmware's file or click the Browse button to find the file.
4. Then, click the Upgrade button to upgrade the firmware.
Figure C-1: Upgrade Firmware
Appendix C: Upgrading Firmware
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Appendix D: Windows Help
All wireless products require Microsoft Windows. Windows is the most used operating system in the world and
comes with many features that help make networking easier. These features can be accessed through Windows
Help and are described in this appendix.
TCP/IP
Before a computer can communicate with the Presentation Player, TCP/IP must be enabled. TCP/IP is a set of
instructions, or protocol, all PCs follow to communicate over a network. This is true for wireless networks as well.
Your PCs will not be able to utilize wireless networking without having TCP/IP enabled. Windows Help provides
complete instructions on enabling TCP/IP.
Shared Resources
If you wish to share printers, folder, or files over your network, Windows Help provides complete instructions on
utilizing shared resources.
Network Neighborhood/My Network Places
Other PCs on your network will appear under Network Neighborhood or My Network Places (depending upon the
version of Windows you're running). Windows Help provides complete instructions on adding PCs to your
network.
Appendix D: Windows Help
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Appendix E: Glossary
802.11a - An IEEE wireless networking standard that specifies a maximum data transfer rate of 54Mbps and an
operating frequency of 5GHz.
802.11b - An IEEE wireless networking standard that specifies a maximum data transfer rate of 11Mbps and an
operating frequency of 2.4GHz.
(802.11g - An IEEE wireless networking standard that specifies a maximum data transfer rate of 54Mbps, an
operating frequency of 2.4GHz, and backward compatibility with 802.11b devices.
Access Point - Device that allows wireless-equipped computers and other devices to communicate with a wired
network. Also used to expand the range of a wireless network.
Adapter - This is a device that adds network functionality to your PC.
Ad-hoc - A group of wireless devices communicating directly with each other (peer-to-peer) without the use of
an access point.
Backbone - The part of a network that connects most of the systems and networks together, and handles the
most data.
Bandwidth - The transmission capacity of a given device or network.
Beacon Interval - The frequency interval of the beacon, which is a packet broadcast by a router to synchronize a
wireless network.
Bit - A binary digit.
Boot - To start a device and cause it to start executing instructions.
Bridge - A device that connects two different kinds of local networks, such as a wireless network to a wired
Ethernet network.
Broadband - An always-on, fast Internet connection.
Browser - A browser is an application program that provides a way to look at and interact with all the
information on the World Wide Web.
Appendix E: Glossary
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Buffer - A block of memory that temporarily holds data to be worked on later when a device is currently too busy
to accept the data.
Cable Modem - A device that connects a computer to the cable television network, which in turn connects to the
Internet.
CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) - A method of data transfer that is used to prevent
data loss in a network.
CTS (Clear To Send) - A signal sent by a device to indicate that it is ready to receive data.
Daisy Chain - A method used to connect devices in a series, one after the other.
Database - A collection of data that is organized so that its contents can easily be accessed, managed, and
updated.
DDNS (Dynamic Domain Name System) - The capability of having a website, FTP, or e-mail server-with a
dynamic IP address-use a fixed domain name.
Default Gateway - A device that forwards Internet traffic from your local area network.
DHCP (Dynamic Host Configuration Protocol) - A protocol that lets one device on a local network, known as a
DHCP server, assign temporary IP addresses to the other network devices, typically computers.
DMZ (Demilitarized Zone) - Removes the Router's firewall protection from one PC, allowing it to be "seen" from
the Internet.
DNS (Domain Name Server) - The IP address of your ISP's server, which translates the names of websites into IP
addresses.
Domain - A specific name for a network of computers.
Download - To receive a file transmitted over a network.
DSL (Digital Subscriber Line) - An always-on broadband connection over traditional phone lines.
DSSS (Direct-Sequence Spread-Spectrum) - A type of radio transmission technology that includes a redundant
bit pattern to lessen the probability of data lost during transmission. Used in 802.11b networking.
DTIM (Delivery Traffic Indication Message) - A message included in data packets that can increase wireless
efficiency.
Appendix E: Glossary
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Dynamic IP Address - A temporary IP address assigned by a DHCP server.
Encryption - Encoding data to prevent it from being read by unauthorized people.
Ethernet - An IEEE standard network protocol that specifies how data is placed on and retrieved from a common
transmission medium.
Finger - A program that tells you the name associated with an e-mail address.
Firewall - Security measures that protect the resources of a local network from intruders.
Firmware - 1. In network devices, the programming that runs the device. 2. Programming loaded into read-only
memory (ROM) or programmable read-only memory (PROM) that cannot be altered by end-users.
Fragmentation - Breaking a packet into smaller units when transmitting over a network medium that cannot
support the original size of the packet.
FTP (File Transfer Protocol) - A standard protocol for sending files between computers over a TCP/IP network and
the Internet.
Full Duplex - The ability of a networking device to receive and transmit data simultaneously.
Gateway - A system that interconnects networks.
Half Duplex - Data transmission that can occur in two directions over a single line, but only one direction at a
time.
Hardware - The physical aspect of computers, telecommunications, and other information technology devices.
HTTP (HyperText Transport Protocol) - The communications protocol used to connect to servers on the World
Wide Web.
IEEE (The Institute of Electrical and Electronics Engineers) - An independent institute that develops networking
standards.
Infrastructure - Currently installed computing and networking equipment.
Infrastructure Mode - Configuration in which a wireless network is bridged to a wired network via an access
point.
IP (Internet Protocol) - A protocol used to send data over a network.
IP Address - The address used to identify a computer or device on a network.
Appendix E: Glossary
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
IPCONFIG - A Windows 2000 and XP utility that displays the IP address for a particular networking device.
IPSec (Internet Protocol Security) - A VPN protocol used to implement secure exchange of packets at the IP layer.
ISM band - Radio band used in wireless networking transmissions.
ISP (Internet Service Provider) - A company that provides access to the Internet.
LAN (Local Area Network) - The computers and networking products that make up the network in your home or
office.
MAC (Media Access Control) Address - The unique address that a manufacturer assigns to each networking
device.
Mbps (Megabits Per Second) - One million bits per second; a unit of measurement for data transmission.
Multicasting - Sending data to a group of destinations at once.
NAT (Network Address Translation) - NAT technology translates IP addresses of a local area network to a
different IP address for the Internet.
Network - A series of computers or devices connected for the purpose of data sharing, storage, and/or
transmission between users.
NNTP (Network News Transfer Protocol) - The protocol used to connect to Usenet groups on the Internet.
Node - A network junction or connection point, typically a computer or work station.
OFDM (Orthogonal Frequency Division Multiplexing) - A type of modulation technology that separates the data
stream into a number of lower-speed data streams, which are then transmitted in parallel. Used in 802.11a,
802.11g, and powerline networking.
Packet - A unit of data sent over a network.
Passphrase - Used much like a password, a passphrase simplifies the WEP encryption process by automatically
generating the WEP encryption keys for Linksys products.
Ping (Packet INternet Groper) - An Internet utility used to determine whether a particular IP address is online.
POP3 (Post Office Protocol 3) - A standard protocol used to retrieve e-mail stored on a mail server.
Port - 1. The connection point on a computer or networking device used for plugging in a cable or an adapter. 2.
The virtual connection point through which a computer uses a specific application on a server.
Appendix E: Glossary
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
PPPoE (Point to Point Protocol over Ethernet) - A type of broadband connection that provides authentication
(username and password) in addition to data transport.
PPTP (Point-to-Point Tunneling Protocol) - A VPN protocol that allows the Point to Point Protocol (PPP) to be
tunneled through an IP network. This protocol is also used as a type of broadband connection in Europe.
Preamble - Part of the wireless signal that synchronizes network traffic.
RJ-45 (Registered Jack-45) - An Ethernet connector that holds up to eight wires.
Roaming - The ability to take a wireless device from one access point's range to another without losing the
connection.
Router - A networking device that connects multiple networks together, such as a local network and the Internet.
RTS (Request To Send) - A packet sent when a computer has data to transmit. The computer will wait for a CTS
(Clear To Send) message before sending data.
Server - Any computer whose function in a network is to provide user access to files, printing, communications,
and other services.
SMTP (Simple Mail Transfer Protocol) - The standard e-mail protocol on the Internet.
SNMP (Simple Network Management Protocol) - A widely used network monitoring and control protocol.
Software - Instructions for the computer. A series of instructions that performs a particular task is called a
"program".
Spread Spectrum - Wideband radio frequency technique used for more reliable and secure data transmission.
SSID (Service Set IDentifier) - Your wireless network's name.
Static IP Address - A fixed address assigned to a computer or device that is connected to a network.
Static Routing - Forwarding data in a network via a fixed path.
Subnet Mask - An address code that determines the size of the network.
Switch - 1. Device that is the central point of connection for computers and other devices in a network, so data
can be shared at full transmission speeds. 2. A device for making, breaking, or changing the connections in an
electrical circuit.
Appendix E: Glossary
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
TCP/IP (Transmission Control Protocol/Internet Protocol) - A network protocol for transmitting data that requires
acknowledgement from the recipient of data sent.
Telnet - A user command and TCP/IP protocol used for accessing remote PCs.
TFTP (Trivial File Transfer Protocol) - A version of the TCP/IP FTP protocol that uses UDP and has no directory or
password capability.
Throughput - The amount of data moved successfully from one node to another in a given time period.
Topology - The physical layout of a network.
TX Rate - Transmission Rate.
UDP (User Datagram Protocol) - A network protocol for transmitting data that does not require acknowledgement
from the recipient of the data that is sent.
Upgrade - To replace existing software or firmware with a newer version.
Upload - To transmit a file over a network.
URL (Uniform Resource Locator) - The address of a file located on the Internet.
VPN (Virtual Private Network) - A security measure to protect data as it leaves one network and goes to another
over the Internet.
WAN (Wide Area Network) - The Internet.
WEP (Wired Equivalent Privacy) - A method of encrypting data transmitted on a wireless network for greater
security.
WINIPCFG - A Windows 98 and Millennium utility that displays the IP address for a particular networking device.
WLAN (Wireless Local Area Network) - A group of computers and associated devices that communicate with
each other wirelessly.
Appendix E: Glossary
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Appendix F: Specifications
Standards
IEEE 802.11g, IEEE 802.3, IEEE 802.3u, USB 1.1
Ports
15-pin female VGA connector, RJ-45 10/100 port, SMA antenna
connector, IRD, USB, Power
Buttons
Reset, Power
Cabling Type
Data Rate
LEDs
Standard VGA, Category 5 (or better) network cable
Up to 54Mbps
Power, Wireless-G, LAN, USB
Dimensions
(W x H x D)
7.32" x 6.89" x 1.89"
(186 mm x 175 mm x 48 mm)
Unit Weight
19.9 oz. (0,56 kg)
Power
External, 5V DC, 2.5A
FCC 15B, FCC 15C
Certifications
Operating Temp.
Storage Temp.
Operating Humidity
Storage Humidity
Warranty
0ºC to 40ºC (32ºF to 104ºF)
-20ºC to 70ºC (-4ºF to 158ºF)
10% to 85% Non-Condensing
5% to 90% Non-Condensing
3-Year Limited
Appendix F: Specifications
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Appendix G: Warranty Information
LIMITED WARRANTY
Linksys warrants to You that, for a period of three years (the “Warranty Period”), your Linksys Product will be substantially
free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys' entire liability under
this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any
rebates. This limited warranty extends only to the original purchaser.
If the Product proves defective during the Warranty Period call Linksys Technical Support in order to obtain a Return
Authorization Number, if applicable. BE SURE TO HAVE YOUR PROOF OF PURCHASE ON HAND WHEN CALLING. If You are
requested to return the Product, mark the Return Authorization Number clearly on the outside of the package and include a
copy of your original proof of purchase. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. You
are responsible for shipping defective Products to Linksys. Linksys pays for UPS Ground shipping from Linksys back to You
only. Customers located outside of the United States of America and Canada are responsible for all shipping and handling
charges.
ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED
TO THE DURATION OF THE WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not
allow limitations on how long an implied warranty lasts, so the above limitation may not apply to You. This warranty gives
You specific legal rights, and You may also have other rights which vary by jurisdiction.
This warranty does not apply if the Product (a) has been altered, except by Linksys, (b) has not been installed, operated,
repaired, or maintained in accordance with instructions supplied by Linksys, or (c) has been subjected to abnormal
physical or electrical stress, misuse, negligence, or accident. In addition, due to the continual development of new
techniques for intruding upon and attacking networks, Linksys does not warrant that the Product will be free of
vulnerability to intrusion or attack.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR
PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY
OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT
(INCLUDING ANY SOFTWARE), EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT
WILL LINKSYS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. The foregoing limitations will apply even
if any warranty or remedy provided under this Agreement fails of its essential purpose. Some jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to You.
Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine, CA 92623.
46
Appendix G: Warranty Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Appendix H: Regulatory Information
FCC STATEMENT
This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment or devices
Connect the equipment to an outlet other than the receiver's
Consult a dealer or an experienced radio/TV technician for assistance
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator and your body.
INDUSTRY CANADA (CANADA)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license
for the system according to the Canadian regulations.
EC DECLARATION OF CONFORMITY (EUROPE)
Linksys declares that the Wireless-G ADSL Gateway conforms to the specifications listed below, following the provisions of
the European R&TTE directive 1999/5/EC:
EN 301 489-1, 301 489-17 General EMC requirements for Radio equipment.
47
Appendix H: Regulatory Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
EN 609 50 Safety
EN 300-328-1, EN 300-328-2 Technical requirements for Radio equipment.
Caution: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain
frequencies and/or may require a license for operation. Contact local Authority for procedure to follow.
Note: Combinations of power levels and antennas resulting in a radiated power level of above 100 mW equivalent isotropic
radiated power (EIRP) are considered as not compliant with the above mentioned directive and are not allowed for use
within the European community and countries that have adopted the European R&TTE directive 1999/5/EC.
For more details on legal combinations of power levels and antennas, contact Linksys Corporate Compliance.
Linksys vakuuttaa täten että Wireless-G ADSL Gateway tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja
sitä koskevien näiden direktiivien muiden ehtojen mukainen.
Linksys Group déclare la Passerelle ADSL sans fil-G est conforme aux conditions essentielles et aux dispositions relatives
à la directive 1999/5/EC.
Belgique:
Dans le cas d'une utilisation privée, à l'extérieur d'un bâtiment, au-dessus d'un espace public, aucun enregistrement n'est
nécessaire pour une distance de moins de 300m. Pour une distance supérieure à 300m un enregistrement auprès de l'IBPT
est requise. Pour une utilisation publique à l'extérieur de bâtiments, une licence de l'IBPT est requise. Pour les
enregistrements et licences, veuillez contacter l'IBPT.
France:
2.4 GHz Bande : les canaux 10, 11, 12, 13 (2457, 2462, 2467, et 2472 MHz respectivement) sont complétement libres
d'utilisation en France (en utilisation intérieur). Pour ce qui est des autres canaux, ils peuvent être soumis à autorisation
selon le départment. L'utilisation en extérieur est soumis à autorisation préalable et très restreint.
renseignements.
48
Appendix H: Regulatory Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless-G Presentation Player
Appendix I: Contact Information
Need to contact Linksys?
Visit us online for information on the latest products and updates
to your existing products at:
ftp.linksys.com
Can't find information about a product you want to buy
on the web? Do you want to know more about networking
with Linksys products? Give our advice line a call at:
Or fax your request in to:
800-546-5797 (LINKSYS)
949-823-3002
If you experience problems with any Linksys product,
you can call us at:
800-326-7114
Don't wish to call? You can e-mail us at:
If any Linksys product proves defective during its warranty period,
you can call the Linksys Return Merchandise Authorization
department for obtaining a Return Authorization Number at:
(Details on Warranty and RMA issues can be found in the Warranty
Information section in this Guide.)
949-823-3000
49
Appendix I: Contact Information
Download from Www.Somanuals.com. All Manuals Search And Download.
|