Z65p Photo Jetprinter™
Setup Guide
October 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your printer
Step 1: Make sure your computer is on
Windows 98
Windows Me
Windows 2000
Windows XP
Step 2: Check the printer parts
CD–2
CD–1
Power supply
Color print
cartridge
(P/N 83)
Black print
cartridge
(P/N 82)
Setup Guide
Photo Guide
1
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Open the front cover.
If the cartridge carrier does not move to the center position, see
page 16 for help.
4 Insert the cartridges.
a
b
c
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 7: Install the printer software
Note: Your software screens may be slightly different from the
ones shown in this booklet, depending on your
operating system. The arrows show you where to click.
1 Click Cancel on all screens similar to the one shown. More than
one screen may appear.
2 Insert CD–1.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Wait for the FotoSlate Select a language screen to appear, and then
click the language of your choice.
4 Wait for the ACD FotoSlate InstallShield Wizard screen to appear,
and then click Next.
If the ACD FotoSlate InstallShield Wizard screen does not appear:
a From your desktop, double-click My Computer.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
b Double-click the CD-ROM drive icon. If necessary, double-click
setup.exe.
c When the ACD FotoSlate InstallShield Wizard screen appears,
click Next.
5 Continue with the steps on your computer screen to complete photo
software installation.
6 Remove CD–1.
7 Insert CD–2.
8 Wait for the Lexmark printer software installation screen to appear,
and then click Install Now.
If the installation screen does not appear:
a From your desktop, double-click My Computer.
b Double-click the CD-ROM drive icon. If necessary, double-click
setup.exe.
c When the printer software installation screen appears, click
Install Now.
9 Continue with the steps on your computer screen to complete
printer software installation. During installation, an alignment page
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding more information
You can find more information in the Photo Guide, your information source
for:
• Learning about your printer
• Printing from paper tray 1
• Printing from paper tray 2
• Printing photos
• Troubleshooting
To access the Photo Guide on your computer, click
Start Programs Lexmark Z65 Photo Guide.
You can find more information in the Lexmark Solution Center, your
complete guide to:
• Aligning and maintaining cartridges
• Viewing printer status information, such as the paper type detected
in paper tray 1 and ink levels
• Troubleshooting
• Printing a test page
To open the Lexmark Solution Center:
• From your desktop, double-click the Lexmark Z65 Solution Center
icon.
Or,
• Click Start Programs or All
Programs Lexmark Z65 Lexmark Z65 Solution Center.
Printer
software
Help
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting checklist
• Is the power supply firmly attached to your printer and an electrical
outlet?
• Are both your printer and computer on?
• Is your USB cable securely attached at both ends?
• Did you remove the sticker and transparent tape from the back and
bottom of both print cartridges?
• Is the black cartridge (P/N 82) in the left carrier and the color
cartridge (P/N 83 or 88) in the right carrier?
• Is the paper loaded correctly? Make sure you do not push the paper
• Did you install the printer software correctly?
From your desktop, click Start Programs or All Programs.
If Lexmark Z65 does not appear in your list of programs, install the
• Did you install the photo software completely?
To check to see if the photo software is installed:
From your desktop, click Start Programs or All Programs.
If ACD Systems does not appear in your list of programs, install the
13
Download from Www.Somanuals.com. All Manuals Search And Download.
• Is your printer connected to your computer through an external
device, such as a USB hub, switch box, scanner, or fax machine? If
follow these steps:
1 Disconnect your printer from any external devices.
2 Connect your printer directly to your computer with a USB cable.
3 Follow these instructions to print a test page.
b From the Troubleshooting tab, click Print a test page.
•
If the test page prints, the problem may be with your external
devices, not your printer. Check the documentation that came
with your external devices for help.
•
If the test page does not print, refer to the printer software Help
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Troubleshooting
Use this section to solve problems you may have while setting up your
printer.
The Search Results: No Printer Attached screen
appeared.
Note: Your screen may appear slightly different from the one
shown depending on your operating system.
problem.
2 Click Continue or Next.
3 If the screen reappears, make sure your USB cable is securely
attached on both sides and is not damaged. If necessary, replace it
with a good quality USB cable, such as Lexmark P/N 12A2405. To
continue software installation, follow the steps on page 9.
The power light did not come on.
1 Check the power supply connections.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
The cartridge carrier did not move to the center.
If the cartridge carrier did not move to the center when you opened the
front cover, first make sure the power light is on. If the power light is on, the
cartridge carrier may have stalled. To fix the problem:
1 Press the power button to turn the printer off.
2 Press the power button again to turn the printer on.
The alignment page did not print.
Make sure:
• You completely removed tape and packaging from the back and
bottom of both print cartridges.
• You installed the black cartridge (P/N 82) in the left carrier and the
color cartridge (P/N 83 or 88) in the right carrier.
• You loaded the paper correctly and did not push it too far into paper
• If there is an error message on your screen, follow the instructions
on it. For additional help, refer to the Lexmark Solution Center (see
page 12).
When I inserted CD–2, nothing happened.
problem. Then:
1 Close all open software applications.
2 Restart your computer.
3 Make sure you click Cancel on all screens similar to those shown in
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Reinsert CD–2.
A Lexmark printer software installation screen similar to the one
If the Lexmark printer software installation screen does not appear,
above, click Install Now, and then continue with step 6.
5 Eject and reinsert CD–2.
If the Lexmark printer software installation screen does not appear:
a From your desktop, double-click My Computer.
b Double-click the CD-ROM drive icon. If necessary, double-click
setup.exe.
c When the Lexmark printer software installation screen appears,
click Install or Install Now.
6 Follow the instructions on each screen to complete printer software
installation.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
The printer software did not install on Windows
98 first edition.
To install the printer software:
1 Unplug the USB cable from your computer.
2 Plug the USB cable back into your computer.
3 Click Next on the Add New Hardware screen.
4 On the Specify location screen, type “C:\WINDOWS\INF\USB.INF”
and then click Next.
5 Click Next.
6 Click Finish.
7 Continue with the instructions on your computer screen to complete
printer software installation.
My document did not print.
problem. Then:
Make sure the printer is set to use the correct port. Since you are using a
USB cable, the printer should be using a USB port such as
18
Download from Www.Somanuals.com. All Manuals Search And Download.
usb-lexmark_Z65 or USB001. To check the printer port and change it, if
necessary, follow the steps for your operating system.
Windows 98/Me
Windows 2000
Windows XP
1 Click Start Settings 1 Click Start Settings 1 Click Start Control
Printers.
Printers.
Panel Printers and
Other Hardware
2 Right-click the
Lexmark Z65 printer
icon, and then click
Properties.
2 Right-click the
Lexmark Z65 printer
icon, and then click
Properties.
Printers and Faxes.
2 Right-click the
Lexmark Z65 printer
icon, and then click
Properties.
3 Click the Details tab.
3 Click the Ports tab.
4 From the Ports
drop-down menu,
select the printer port.
4 From the list of ports,
select the correct
printer port.
3 Click the Ports tab.
4 From the list of ports,
select the correct
printer port.
5 If the correct port is
not listed, uninstall
and then reinstall the
printer software. For
5 If the correct port is
not listed, uninstall
and then reinstall the
printer software. For
help, see page 20.
5 If the correct port is
not listed, uninstall
and then reinstall the
printer software. For
help, see page 20.
6 Click OK.
6 Click Apply.
7 Click OK.
6 Click Apply.
7 Click OK.
If your document did not print, print a test page:
1 From your desktop, double-click the Lexmark Z65 Solution Center
icon.
2 From the Troubleshooting tab, click Print a test page.
– If the test page prints, your printer is working properly. Check
your software application documentation for troubleshooting
information.
– If the test page does not print, click the Help button on the error
message that appears or refer to the printer software Help (see
page 12).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
A paper tray light is blinking.
• Your printer may be out of paper or the paper may be jammed.
• If there is an error message on your screen, follow the instructions
on it.
A communications error message appeared.
problem.
If the printer software does not install properly, a communications error
message appears when you try to print. You may need to uninstall and
then reinstall the printer software. For help, see “My printer is still not
My printer is still not working.
If the suggestions in this chapter did not solve your printing problem,
uninstall and then reinstall the printer software.
1 Uninstall the printer software.
a From your desktop, click Start Programs or All
Programs Lexmark Z65 Lexmark Z65 Uninstall.
b Follow the instructions on your screen to uninstall the printer
software.
c Restart your computer before installing the printer software.
2 Install the printer software.
a Insert CD–2.
b When the Lexmark printer software installation screen appears,
click Install Now.
If the installation screen does not appear, see page 16.
c Continue with the installation steps on your computer screen to
complete printer software installation.
3 Verify printer software installation.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
a Click Start Programs or All Programs Lexmark
Z65 Lexmark Z65 Solution Center.
b From the Troubleshooting tab, click Print a test page.
If the test page prints, your printer is working properly. If the test
page does not print, refer to the printer software Help (see
page 12).
The Card Reader drive did not appear in Windows
Explorer.
If the USB Card Reader drive did not appear in Windows Explorer, you
may have installed the printer software CD before the photo software CD.
To fix the problem:
1 Restart your computer.
2 Remove and reinsert the USB cable.
Contacting Lexmark
• Receive technical support.
• Register your printer.
• Access documentation for your printer.
• Check for free offers.
Here are other ways to contact Lexmark:
• From the Lexmark Solution Center, click Contact
Information Customer Support.
• Insert the CD–2, and then click Contact Lexmark Technical
Support.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
power supply, connecting
2
USB Card Reader
drive 21
A
alignment page did not
print 16
U
print cartridge
USB cable
C
printer cable,
cable, USB
troubleshooting 13
cartridges
cartridges,
troubleshooting 13
connecting
S
T
troubleshooting
I
installing printer software
9
communications error
message 20
L
installing printer
software 20
No Printer Attached
screen 15
Lexmark Solution Center
12
printer software did not
install 18
P
part number
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc.,
registered in the United States and/or other countries. Photo Jetprinter is a trademark of
Lexmark International, Inc.
© October 2002 Lexmark International, Inc.
740 West New Circle Road
Lexington, Kentucky 40550
Download from Www.Somanuals.com. All Manuals Search And Download.
|