LG Electronics Flat Panel Television SAC30708022 User Manual
LCD TV  
OWNER’S MANUAL  
19LG30  
19LG31  
22LG30  
22LG31  
22LG30DC  
26LG30  
26LG30DC  
Please read this manual carefully before operating  
your set and retain it for future reference.  
Write the model number and serial number from the  
label on the back cabinet on the front or back of  
this manual.  
P/NO : SAC30708022 (0810-REV06)  
Download from Wwww.Sowmwan.ulaglsu.cosma..AclloMamnua/ls SweawrchwA.nldgD.cowanlo/adw. ww.lgcommercial.com  
SAFETY INSTRUCTIONS  
IMPORTANT SAFETY INSTRUCTIONS  
Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
Read these instructions.  
6
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
1
Only use attachments/accessories specified by  
the manufacturer.  
7
Clean only with dry cloth.  
2
Use only with the cart, stand, tripod, bracket,  
or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus com-  
bination to avoid injury from tip-over.  
8
Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
3
Do not install near any heat sources such as  
4
Unplug this apparatus during lighting storms  
or when unused for long periods of time.  
9
radiators, heat registers, stoves, or other  
apparatus (including amplifiers)that produce  
heat.  
Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has  
been damaged in any way, such as power-  
supply cord or plug is damaged, liquid has  
been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or  
has been dropped.  
10  
Do not defeat the safety purpose of the polarized  
or grounding-type plug. A polarized plug has  
two blades with one wider than the other. A  
grounding type plug has two blades and a  
third grounding prong, The wide blade or the  
third prong are provided for your safety. If the  
provided plug does not fit into your outlet,  
consult an electrician for replacement of the  
obsolete outlet.  
5
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
Never touch this apparatus or antenna during  
a thunder or lighting storm.  
WARNING - To reduce the risk of fire or electrical  
shock, do not expose this product to rain,  
moisture or other liquids. Do not touch the TV  
with wet hands. Do not install this product  
near flammable objects such as gasoline or  
candles or expose the TV to direct air  
conditioning.  
15  
11  
12  
When mounting a TV on the wall, make sure  
not to install the TV by the hanging power and  
signal cables on the back of the TV.  
Do not allow an impact shock or any objects to  
fall into the product, and do not drop onto the  
screen with something.  
13  
14  
CAUTION concerning the Power Cord:  
Do not expose to dripping or splashing and do  
not place objects filled with liquids, such as  
vases, cups, etc. on or over the apparatus (e.g.  
on shelves above the unit).  
It is recommend that appliances be placed  
upon a dedicated circuit; that is, a single  
outlet circuit which powers only that appliance  
and has no additional outlets or branch  
circuits. Check the specification page of this  
owner's manual to be certain.  
16  
17  
Do not connect too many appliances to the  
same AC power outlet as this could result in  
fire or electric shock.  
Do not overload wall outlets. Overloaded wall  
outlets, loose or damaged wall outlets, extension  
cords, frayed power cords, or damaged or  
cracked wire insulation are dangerous. Any of  
these conditions could result in electric shock  
or fire. Periodically examine the cord of your  
appliance, and if its appearance indicates damage  
or deterioration, unplug it, discontinue use of  
the appliance, and have the cord replaced with  
an exact replacement part by an authorized  
servicer. Protect the power cord from physical  
or mechanical abuse, such as being twisted,  
kinked, pinched, closed in a door, or walked  
upon. Pay particular attention to plugs, wall  
outlets, and the point where the cord exits the  
appliance.  
GROUNDING  
Ensure that you connect the earth ground wire  
to prevent possible electric shock (i.e. a TV  
with a three-prong grounded AC plug must be  
connected to a three-prong grounded AC out-  
let). If grounding methods are not possible,  
have a qualified electrician install a separate  
circuit breaker.  
Do not try to ground the unit by connecting it  
to telephone wires, lightening rods, or gas  
pipes.  
Power  
Supply  
Short-circuit  
Breaker  
Do not make the TV with the power cord  
plugged in. Do not use a damaged or loose  
power cord. Be sure do grasp the plug when  
unplugging the power cord. Do not pull on the  
power cord to unplug the TV.  
DISCONNECTING DEVICE FROM MAINS  
18  
19  
Mains plug is the disconnecting device. The  
plug must remain readily operable.  
Keep the product away from direct sunlight.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANTENNAS  
Moving  
22  
23  
20  
Outdoor antenna grounding  
Make sure the product is turned off,  
unplugged and all cables have been removed. It  
may take 2 or more people to carry larger TVs.  
Do not press against or put stress on the front  
panel of the TV.  
If an outdoor antenna is installed, follow the  
precautions below. An outdoor antenna system  
should not be located in the vicinity of over-  
head power lines or other electric light or  
power circuits, or where it can come in contact  
with such power lines or circuits as death or  
serious injury can occur.  
Ventilation  
Install your TV where there is proper ventila-  
tion. Do not install in a confined space such as  
a bookcase. Do not cover the product with  
cloth or other materials (e.g.) plastic while  
plugged in. Do not install in excessively dusty  
places.  
Be sure the antenna system is grounded so as  
to provide some protection against voltage  
surges and built-up static charges.  
Section 810 of the National Electrical Code  
(NEC) in the U.S.A. provides information with  
respect to proper grounding of the mast and  
supporting structure, grounding of the lead-in  
wire to an antenna discharge unit, size of  
grounding conductors, location of antenna dis-  
charge unit, connection to grounding elec-  
trodes and requirements for the grounding  
electrode.  
24  
25  
If you smell smoke or other odors coming from  
the TV or hear strange sounds, unplug the power  
cord contact an authorized service center.  
Do not press strongly upon the panel with  
hand or sharp object such as nail, pencil or  
pen, or make a scratch on it.  
Antenna grounding according to the  
National Electrical Code, ANSI/NFPA 70  
Ground Clamp  
Antenna Lead in Wire  
Antenna Discharge Unit  
(NEC Section 810-20)  
Grounding Conductor  
(NEC Section 810-21)  
Electric Service  
Equipment  
Ground Clamps  
Power Service Grounding  
Electrode System (NEC  
Art 250, Part H)  
NEC: National Electrical Code  
Cleaning  
21  
When cleaning, unplug the power cord and  
scrub gently with a soft cloth to prevent  
scratching. Do not spray water or other liquids  
directly on the TV as electric shock may occur.  
Do not clean with chemicals such as alcohol,  
thinners or benzene.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Channel Setup  
WARNING / CAUTION  
. . . . . . . . . . . . . . . . . . . . . . . . . . . .  
A
1
- Auto Scan (Auto Tuning)  
. . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . .  
45  
46  
47  
48  
49  
SAFETY INSTRUCTIONS  
PREPARATION  
. . . . . . . . . . . . . . . . . . . . . . . . . .  
- Add / Delete Channel (Manual Tuning)  
- Channel Editing  
Input List  
Input Label  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Accessories  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
7
8
PICTURE CONTROL  
Front Panel Information  
Back Panel Information  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
10  
12  
14  
15  
15  
15  
16  
16  
16  
17  
Picture Size (Aspect Ratio) Control  
Preset Picture Settings  
. . . . . . . . . . . . . . . . . .  
50  
Stand Instruction  
Cable Management  
Desktop Pedestal Installation  
Swivel Stand  
VESA Wall Mounting  
Attaching the TV to a Desk  
Positioning your Display  
Kensington Security System  
Antenna or Cable Connection  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
- Picture Mode - Preset  
- Color Tone - Preset  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
52  
53  
. . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Manual Picture Adjustment  
- Picture Mode - User Mode  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . .  
54  
55  
56  
57  
58  
59  
60  
Picture Improvement Technology  
Advanced Control - Black (Darkness) Level  
Advanced Control - Eye Care  
Advanced Control - Real Cinema  
. . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . .  
Picture Reset  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Power Indicator  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
EXTERNAL EQUIPMENT SETUP  
HD Receiver Setup  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
18  
23  
26  
29  
29  
30  
31  
DVD Setup  
VCR Setup  
SOUND & LANGUAGE CONTROL  
Auto Volume Leveler (Auto Volume)  
. . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . .  
. . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
61  
62  
63  
64  
65  
66  
67  
68  
69  
Headphone Setup  
Other A/V Source Setup  
Audio out Connection  
PC Setup  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Preset Sound Setting (Sound Mode)  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Sound Setting Adjustment - User Mode  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Balance  
TV Speakers On/Off Setup  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Audio Reset  
Stereo/SAP Broadcasts Setup  
Audio Language  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
WATCHING TV / CHANNEL CONTROL  
. . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Remote Control Functions  
Turning On TV  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
38  
40  
40  
40  
41  
42  
44  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
On-Screen Menus Language Selection  
Caption Mode  
. . . . . . . . . . . . .  
Channel Selection  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Volume Adjustment  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
- Analog Broadcasting System Captions  
- Digital Broadcasting System Captions  
. . . . . . .  
70  
71  
72  
Quick Menu / Favorite Channel Setup  
Initial Setting  
On-Screen Menus Selection  
. . . . . . . . . . . . . .  
. . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
- Caption Option  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . .  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIME SETTING  
Clock Setting  
- Auto Clock Setup  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
73  
74  
75  
76  
77  
- Manual Clock Setup  
Auto On/Off Time Setting  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Sleep Timer Setting  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Auto Shut-off Setting  
PARENTAL CONTROL / RATINGS  
Set Password & Lock System  
. . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
78  
81  
82  
87  
88  
89  
Channel Blocking  
Movie & TV Rating  
Downloadable Rating  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
External Input Blocking  
Key Lock  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
APPENDIX  
Troubleshooting  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
90  
92  
93  
Maintenance  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Product Specifications  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
External Control Through RS-232C . . . . . . . . . . . . . . . . . .94  
Open Source License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 0  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manufactured under license from Dolby Laboratories.  
“Dolby “and the double-D symbol are trademarks of  
Dolby Laboratories.  
I
If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is  
nothing wrong with TV.  
I
I
Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they  
have no adverse effect on the monitor's performance.  
Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce  
some temporary distortion effects on the screen.  
On Disposal (Only Hg lamp used LCD TV)  
The fluorescent lamp used in this product contains a small amount of mercury.Do not dispose of this product with  
general household waste. Disposal of this product must be carried out in accordance to the regulations of your local  
authority.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
ACCESSORIES  
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the  
dealer where you purchased the TV.  
The accessories included may differ from the images below.  
1.5V 1.5V  
Copyright© 2007 LGE,  
All Rights Reserved.  
Remote Control,  
Batteries  
Owner’s Manual  
CD Manual  
Power Cord  
Only 19/22LG3**  
Cable Management Clip  
Protection Cover  
Only 26LG3**  
x 4  
x 4  
Bolts for stand assembly  
(Refer to P.12)  
Screw for stand fixing  
(Refer to P.16)  
Protection Cover  
* Wipe spots on the exterior only with  
the polishing cloth.  
* Do not wipe roughly when removing  
stain. Please be cautions of that  
excessive pressure may cause scratch  
or discoloration.  
Polishing Cloth  
(This feature is not available  
for all models.)  
Protective Bracket and Bolt for  
Power Cord  
(This feature is not available for all models.)  
(Refer to P.14)  
Option Extras  
When using the VGA (D-sub 15 pin cable)  
PC connection, the user must use shielded  
signal interface cables with ferrite cores to  
maintain standards compliance.  
D-sub 15 pin Cable  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
FRONT PANEL INFORMATION  
I
Image shown may differ from your TV.  
I
NOTE: If your TV has a protection tape attached, remove the tape.  
And then wipe the TV with a cloth (If a polishing cloth is included with your product, use it).  
19/22LG3**  
MENU  
Button  
VOLUME  
(-, +) Buttons  
INPUT  
Button  
ENTER  
Button  
CHANNEL  
(-, +) Buttons  
INPUT  
ENTER  
VOL  
CH  
MENU  
Power/Standby Indicator  
Illuminates red in standby mode.  
Illuminates blue when the TV is switched on.  
Remote Control Sensor  
POWER Button  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
26LG3**  
CHANNEL (+, -)  
Buttons  
CH  
VOLUME (+, -)  
Buttons  
VOL  
ENTER  
MENU  
INPUT  
ENTER Button  
MENU Button  
INPUT Button  
Power/Standby Indicator  
Illuminates red in standby mode.  
Illuminates blue when the TV is switched on.  
Power Indicator  
(Can be adjusted  
OPTION menu. G p.60)  
in the  
Remote Control Sensor  
POWER Button  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
BACK PANEL INFORMATION  
I
Image shown may differ from your TV.  
12  
19/22LG3**  
ANTENNA/CABLE IN  
6
1
3
AV IN  
AUDIO IN  
(RGB/DVI)  
RGB(PC) IN  
S-VIDEO  
HDMI/DVI IN  
VIDEO  
AUDIO  
9
2
11  
L(MONO)  
R
HEADPHONE  
L
R
SERVICE  
ONLY  
RS-232C IN  
(SERVICE ONLY)  
AUDIO  
VIDEO  
10  
26LG3**  
10  
1
5
ANTENNA/  
CABLE IN  
6
3
4
RGB IN  
DIGITAL  
AUDIO OUT  
OPTICAL  
AUDIO  
REMOTE  
RGB(PC)  
CONTROL IN  
1
7
(RGB/DVI)  
HDMI/DVI IN  
RS-232C IN  
(CONTROL & SERVICE)  
AUDIO OUT  
8
2
1
2
9
1
9
AUDIO  
VIDEO  
COMPONENT IN  
(
)
MONO  
AUDIO  
VIDEO  
S-VIDEO  
AV IN 2  
2
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
8
9
HDMI/DVI IN, HDMI IN  
AUDIO OUT  
Digital Connection.  
Analog audio output for use with amps and home  
theater systems.  
Supports HD video and Digital audio. Doesn’t  
support 480i.  
Accepts DVI video using an adapter or HDMI to  
DVI cable (not included)  
AV (Audio/Video) IN  
Analog composite connection. Supports standard  
definition video only (480i).  
2
COMPONENT IN  
Analog Connection.  
Supports HD.  
S-VIDEO  
Better quality than standard composition.  
Supports standard definition video only (480i).  
Uses a red, green, and blue cable for video & red  
and white for audio.  
10  
USB SERVICE ONLY  
SERVICE ONLY  
3
RGB (PC)  
RS-232C IN (SERVICE ONLY)  
Used for software updates.  
For 22LG30DC: RS-232C IN (SERVICE ONLY)  
Used by third party devices.  
Analog PC Connection. Uses a D-sub 15 pin cable  
(VGA cable).  
AUDIO (RGB/DVI)  
1/8” headphone jack for analog PC audio input.  
11  
12  
Headphone INPUT  
4
5
REMOTE CONTROL PORT  
Plug the headphone into the headphone socket.  
For a wired remote control.  
Power Cord Socket  
RS-232C IN (CONTROL & SERVICE) PORT  
For operation with AC power.  
Used by third party devices.  
Caution: Never attempt to operate the TV on DC  
power.  
6
7
ANTENNA/CABLE IN  
Connect over-the air signals to this jack.  
Connect cable signals to this jack.  
DIGITAL AUDIO OUT OPTICAL  
Digital audio output for use with amps and home  
theater systems.  
Includes an optical connection.  
Note: In standby mode, these ports do not work.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
STAND INSTRUCTION  
I
Image shown may differ from your TV  
For 19/22LG3**  
INSTALLATION  
PROTECTION COVER  
Loose the bolts from TV.  
1
Carefully place the TV screen side down on a  
cushioned surface to protect the screen from  
damage.  
1
HINGE BODY  
Bend the  
and pull it backward.  
2
STAND BODY  
STAND  
of the TV. Insert the  
Assemble the parts of the  
COVER BASE  
with  
2
BODY  
COVER BASE  
until clicking sound.  
into a  
STAND BODY  
COVER BASE  
HINGE BODY  
PROTECTION COVER  
Insert the  
into the TV.  
3
Assemble the TV as shown.  
3
PROTECTION COVER  
Fix the 4 bolts securely using the holes in the  
back of the TV.  
4
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For 26LG3**  
INSTALLATION  
DETACHMENT  
Carefully place the TV screen side down on a  
cushioned surface to protect the screen from  
damage.  
Carefully place the TV screen side down on a cush-  
ioned surface to protect the screen from damage.  
1
1
STAND BODY  
Assemble the parts of the  
COVER BASE  
2
Loose the bolts from TV.  
with  
of the TV.  
2
STAND BODY  
COVER BASE  
Detach the stand from TV.  
3
Assemble the TV as shown.  
3
4
PROTECTION COVER  
After removing the stand, install the included  
Fix the 4 bolts securely using the holes in the  
back of the TV.  
protection cover  
over the hole for the stand.  
into the TV  
PROTECTION COVER  
Press the  
until you hear it click.  
!
NOTE  
G When assembling the desk type stand, make sure  
the bolt is fully tightened. (If not tightened fully,  
the TV can tilt forward after the product installa-  
tion). Do not over tighten.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
CABLE MANAGEMENT  
Image shown may differ from your TV  
I
For 19/22LG3**  
For 26LG3**  
Connect the cables as necessary.  
Connect the cables as necessary.  
1
1
To connect additional equipment, see the  
EXTERNAL EQUIPMENT SETUP section.  
To connect additional equipment, see the  
EXTERNAL EQUIPMENT SETUP section.  
Secure the power cable with the PROTECTIVE  
BRACKET and the screw as shown. It will help prevent  
the power cable from being removed by accident.  
Secure the power cable with the PROTECTIVE  
BRACKET and the screw as shown. It will help  
prevent the power cable from being removed  
by accident.  
PROTECTIVE  
BRACKET  
(This feature is not  
available for all models.)  
PROTECTIVE  
BRACKET  
(This feature is not  
available for all models.)  
Install the CABLE MANAGEMENT CLIP as shown.  
2
Install the CABLE MANAGEMENT CLIP as  
shown.  
2
CABLE MANAGEMENT CLIP  
Fit the CABLE MANAGEMENT CLIP as shown.  
3
CABLE MANAGEMENT CLIP  
Put the cables inside the CABLE MANAGEMENT  
CLIP and snap it closed.  
3
How to remove the  
CABLE MANAGEMENT CLIP  
G Hold the CABLE MANAGE-  
MENT CLIP with both hands  
and pull it backward.  
!
NOTE  
G Do not hold the CABLE MANAGEMENT CLIP when moving the TV.  
- If the TV is dropped, you may be injured or the product may be broken.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESKTOP PEDESTAL  
INSTALLATION  
VESA WALL MOUNTING  
Install your wall mount on a solid wall perpendicular  
to the floor. When attaching to other building materi-  
als, please contact your nearest dealer.  
If installed on a ceiling or slanted wall, it may fall and  
result in severe personal injury.  
We recommend that you use an LG brand wall mount  
when mounting the TV to a wall.  
I
Image shown may differ from your TV.  
For proper ventilation, allow a clearance of 4 inches  
on all four sides from the wall.  
LG recommends that wall mounting be performed by  
a qualified professional installer.  
4 inches  
A
4 inches  
4 inches  
4 inches  
B
Standard  
Screw  
VESA  
(A B)  
Model  
Quantity  
4
*
19LG3**  
22LG3**  
10 0 10 0  
*
M4  
CAUTION  
G Ensure adequate ventilation by following the  
clearance recommendations.  
26LG3**  
200 10 0  
*
M4  
4
!
NOTE  
G Screw length needed depends on the wall  
mount used. For further information, refer to  
the instructions included with the mount.  
G Standard dimensions for wall mount kits are  
shown in the table.  
G When purchasing our wall mount kit, a detailed  
installation manual and all parts necessary for  
assembly are provided.  
SWIVEL STAND (Only 26LG3**)  
After installing the TV, you can adjust the TV set  
manually to the left or right direction by 20  
degrees to suit your viewing position.  
G Do not use screws longer then the standard  
dimension, as they may cause damage to the  
inside to the TV.  
G For wall mounts that do not comply with the  
VESA standard screw specifications, the length  
of the screws may differ depending on their  
specifications.  
G Do not use screws that do not comply with the  
VESA standard screw specifications.  
Do not use fasten the screws too strongly, this  
may damage the TV or cause the TV to a fall,  
leading to personal injury. LG is not liable for  
these kinds of accidents.  
G LG is not liable for TV damage or personal injury  
when a non-VESA or non specified wall mount is  
used or the consumer fails to follow the TV instal-  
lation instructions.  
CAUTION  
G Do not install your wall mount kit while your TV  
is turned on. It may result in personal injury  
due to electric shock.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
ATTACHING THE TV TO A DESK (Only 26LG3**)  
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing  
injury or damaging the product.  
Stand  
1-Screw  
(provided as parts of the product)  
Desk  
WARNING  
G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation  
instructions. Tipping, shaking, or rocking the machine may cause injury.  
POSITIONING YOUR DISPLAY (Only 19/22LG3**)  
Here shown may be somewhat different from your TV.  
I
I
Adjust the position of the panel in various ways for maximum comfort.  
• Tilt range  
KENSINGTON SECURITY SYSTEM (Only 19/22LG3**)  
- The TV is equipped with a Kensington Security System connector on  
the back panel. Connect the Kensington Security System cable as  
shown below.  
- For the detailed installation and use of the Kensington Security  
System, refer to the user’s guide provided with the Kensington  
Security System.  
http://www.kensington.com  
For further information, contact  
,
the internet homepage of the Kensington company. Kensington sells  
security systems for expensive electronic equipment such as note-  
book PCs and LCD projectors.  
NOTE: The Kensington Security System is an optional accessory.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I
I
To prevent damage do not connect to the power outlet until all connections are made between the devices.  
Image shown may differ from your TV.  
ANTENNA OR CABLE CONNECTION  
1. Antenna (Analog or Digital)  
Wall Antenna Socket or Outdoor Antenna without a Cable Box  
Connections.  
For optimum picture quality, adjust antenna direction if needed.  
Multi-family Dwellings/Apartments  
(Connect to wall antenna socket)  
Wall  
Antenna  
Socket  
ANTENNA/CABLE IN  
RF Coaxial Wire (75 ohm)  
Outdoor  
Antenna  
Single-family Dwellings /Houses  
(Connect to wall jack for outdoor antenna)  
(VHF, UHF)  
Copper Wire  
Be careful not to bend the bronze wire  
when connecting the antenna.  
2. Cable  
ANTENNA/CABLE IN  
Cable TV  
Wall Jack  
RF Coaxial Wire (75 ohm)  
I
I
I
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.  
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.  
If the antenna is not installed properly, contact your dealer for assistance.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
I
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.  
HD RECEIVER SETUP  
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do  
receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.  
Component Connection  
19/22LG3**  
Y
PB  
PR  
L
R
1. How to connect  
(
)
Connect the video outputs Y, PB, PR of the digital set-  
1
COMPONENT IN VIDEO  
top box to the  
jacks on  
the TV. Match the jack colors (Y = green, PB = blue, and  
PR = red).  
2
1
Connect the audio output of the digital set-top box to  
ANTENNA/CABLE IN  
2
COMPONENT IN AUDIO  
the  
jacks on the TV.  
V IN  
AUDIO
(RGB/DVI)  
IN  
S-VDEO  
2. How to use  
VIDEO  
AUDIO  
I
Turn on the digital set-top box.  
L(MONO)  
R
(
)
Refer to the owner’s manual for the digital set-top box. operation  
I
Component  
button on the remote control.  
Select the  
INPUT  
input source on the TV using the  
L
R
IN  
NLY)  
AUDIO  
VIDEO  
Supported Resolutions  
Y, CB/PB, CR/PR  
Horizontal  
(
Frequency KHz  
Vertical  
(
Frequency Hz  
Signal  
Component  
HDMI  
Resolution  
)
)
480i  
480p  
720p  
1080 i  
1080 p  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
15.73  
15.73  
59.94  
60.00  
720x480i  
720x480p  
1280x720p  
1920x1080i  
31.47  
31.50  
59.94  
60.00  
44.96  
45.00  
59.94  
60.00  
33.72  
33.75  
59.94  
60.00  
27.00  
33.75  
67.43  
67.50  
24.00  
30.00  
59.94  
60.00  
1920x1080p  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26LG3**  
Y
PB  
PR  
L
R
1. How to connect  
(
)
Connect the video outputs Y, PB, PR of the digital set-  
1
COMPONENT IN VIDEO 1  
top box to the  
jacks on  
the TV. Match the jack colors (Y = green, PB = blue, and  
PR = red).  
2
1
Connect the audio output of the digital set-top box to  
RGB IN  
2
AUDIO  
REMOTE  
COMPONENT IN AUDIO 1  
the  
jacks on the TV.  
RGB(PC)  
CONTROL IN  
(RGB/DVI)  
I IN  
RS  
(CONTR  
2. How to use  
2
1
I
Turn on the digital set-top box.  
Y
PB  
PR  
L
R
(
)
Refer to the owner’s manual for the digital set-top box. operation  
I
I
Component 1  
INPUT  
button on the remote control.  
Select the  
the  
input source on the TV using  
AUDIO  
VIDEO  
COMPONENT IN  
S-  
COMPONENT IN2  
Component 2  
input source on the TV.  
If connected to  
input, select the  
Y, CB/PB, CR/PR  
Supported Resolutions  
Horizontal  
(
Frequency KHz  
Vertical  
(
Frequency Hz  
Signal  
Component  
HDMI  
Resolution  
)
)
480i  
480p  
720p  
1080 i  
1080 p  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
15.73  
15.73  
59.94  
60.00  
720x480i  
720x480p  
1280x720p  
1920x1080i  
31.47  
31.50  
59.94  
60.00  
44.96  
45.00  
59.94  
60.00  
33.72  
33.75  
59.94  
60.00  
26.97  
27.00  
33.71  
33.75  
67.432  
67.50  
23.976  
24.00  
29.97  
30.00  
59.94  
60.00  
1920x1080p  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
HDMI Connection  
19/22LG3**  
1. How to connect  
HDMI/DVI IN  
Connect the digital set-top box to  
jack on the TV.  
1
2
A
RGB(PC) IN  
HDMI/DVI IN  
(R  
No separate audio connection is necessary.  
HDMI supports both audio and video.  
E  
RS-232C IN  
(SERVICE ONLY)  
2. How to use  
1
I
Turn on the digital set-top box.  
(
)
Refer to the owner’s manual for the digital set-top box.  
I
HDMI  
button on the remote control.  
INPUT  
input source on the TV using the  
Select the  
HDMI-DTV OUTPUT  
HDMI-DTV  
Horizontal  
Vertical  
Resolution  
720x480p  
(
Frequency KHz  
)
(
Frequency Hz  
)
31.47  
31.50  
59.94  
60.00  
44.96  
45.00  
59.94  
60.00  
1280x720p  
1920x1080i  
33.72  
33.75  
59.94  
60.00  
27.00  
33.75  
67.43  
67.50  
24.00  
30.00  
59.94  
60.00  
1920x1080p  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26LG3**  
RGB IN  
1. How to connect  
RGB(PC)  
HDMI/DVI IN1  
Connect the digital set-top box to  
2
,
1
2
HDMI/DVI IN  
2
3
, or jack on the TV.  
2
1
Y
PB  
PR  
No separate audio connection is necessary.  
HDMI supports both audio and video.  
1
VIDEO  
COMPONE  
2. How to use  
I
Turn on the digital set-top box.  
(
)
Refer to the owner’s manual for the digital set-top box.  
1
I
HDMI1 HDMI2  
, or  
HDMI3  
button on the remote control.  
Select the  
TV using the  
,
INPUT  
input source on the  
HDMI-DTV OUTPUT  
HDMI-DTV  
Horizontal  
(
Frequency KHz  
Vertical  
(
Frequency Hz  
Resolution  
)
)
31.47  
31.50  
59.94  
60.00  
720x480p  
1280x720p  
1920x1080i  
44.96  
45.00  
59.94  
60.00  
33.72  
33.75  
59.94  
60.00  
26.97  
27.00  
33.71  
33.75  
67.432  
67.50  
23.976  
24.00  
29.97  
30.00  
59.939  
60.00  
1920x1080p  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
DVI to HDMI Connection  
19/22LG3**  
26LG3**  
RGB IN  
AUDIO  
REMO  
RGB(PC)  
CONTRO  
(RGB/DVI)  
HDMI/DVI IN  
AUDIO IN  
RGB(PC) IN  
S-VID  
HDMI/DVI IN  
(RGB/DVI)  
2
1
2
1
Y
PB  
PR  
L
R
AUDIO  
VIDEO  
COMPONENT IN  
SCE  
LY  
RS-232C IN  
(SERVICE ONLY)  
VIDE  
1
2
2
1
L
R
DVI-DTV OUTPUT  
L
R
DVI-DTV OUTPUT  
1. How to connect  
HDMI/DVI IN HDMI/DVI IN 1/2/3  
or  
Connect the DVI output of the digital set-top box to the  
jack on the TV.  
1
2
(
AUDIO IN RGB/DVI  
)
(
AUDIO RGB/DVI  
)
Connect the PC audio output to the  
or  
jack on the TV.  
2. How to use  
I
Turn on the digital set-top box.  
(
)
Refer to the owner’s manual for the digital set-top box.  
I
HDMI HDMI1/2/3  
or  
INPUT  
button on the remote control.  
Select the  
input source on the TV using the  
!
NOTE  
G A DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate  
audio connection is necessary.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD SETUP  
Component Connection  
19/22LG3**  
26LG3**  
Y
PB  
PR  
L
R
Y
PB  
PR  
L
R
1
2
1
2
ANTENNA/CABLE IN  
RGB IN  
A
AUDIO  
REMOTE  
O
RGB(PC)  
CONTROL IN  
(RGB/DVI)  
V IN  
AUDIO
(RGB/DVI)  
VI IN  
S-VDEO  
RS  
(CONTRO  
VIDEO  
AUDIO  
2
L(MNO)  
R
Y
PB  
PR  
L
R
1
AUDIO  
VIDEO  
COMPONENT IN  
L
R
S-V  
AUDIO  
VIDEO  
1. How to connect  
(
)
COMPONENT IN VIDEO COMPONENT  
or  
Connect the video outputs Y, PB, PR of the DVD to the  
1
2
(
)
IN VIDEO1  
jacks on the TV. Match the jack colors Y = green, PB = blue, and PR = red .  
COMPONENT IN AUDIO  
COMPONENT IN  
or  
Connect the audio outputs of the DVD to the  
AUDIO1  
jacks on the TV.  
2. How to use  
I
Turn on the DVD player, insert a DVD.  
I
Component Component 1  
or  
INPUT  
button on the  
Select the  
input source on the TV using the  
remote control.  
If connected to  
I
I
COMPONENT IN 2  
Component 2  
input source on the TV.  
input, select the  
Refer to the DVD player's manual for operating instructions.  
Component Input ports  
To get better picture quality, connect a DVD player to the component input ports as shown below.  
Y
PB  
PR  
Component ports on the TV  
PB  
B-Y  
Cb  
Pb  
PR  
R-Y  
Cr  
Pr  
Y
Y
Y
Y
Video output ports  
on DVD player  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
S-Video Connection  
19/22LG3**  
26LG3**  
ANTENNA/CABLE IN  
AUDIO  
L
R
S-VIDEO  
AV IN  
AUDIO IN  
S-VIDEO  
(RGB/DVI)  
VIDEO  
AUDIO  
L(MONO)  
R
ANTENNA/  
CABLE IN  
AUDIO  
VEO  
DIGITAL  
AUDIO OUT  
OPTICAL  
UDIO  
REMOTE  
CONTROL IN  
B/DVI)  
2
2
1
1
RS2C IN  
(CONT& SERVICE)  
ADIO OT  
L
R
AUDIO  
(MONO)  
L
R
VIDEO L  
AUDIO  
R
S-VIDEO  
S-VIDEO  
IN  
AUDIO  
1. How to connect  
S -VIDEO  
Connect the S-VIDEO output of the DVD to the  
Connect the audio outputs of the DVD to the  
input on the TV.  
1
2
AUDIO  
input jacks on the TV.  
2. How to use  
I
Turn on the DVD player, insert a DVD.  
I
I
AV AV1  
or  
INPUT  
button on the remote control.  
Select the  
input source on the TV using the  
Refer to the DVD player's manual for operating instructions.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI Connection  
19/22LG3**  
26LG3**  
RGB IN  
RGB(PC)  
HDMI/DVI IN  
2
2
1
A
RGB(PC) IN  
HDMI/DVI IN  
(
Y
PB  
1
VIDEO  
COMPON  
E  
RS-232C IN  
(SERVICE ONLY)  
1
1
HDMI-DVD OUTPUT  
HDMI-DVD OUTPUT  
1. How to connect  
HDMI/DVI IN HDMI/DVI IN 1/2/3  
or  
Connect the HDMI output of the DVD to the  
jack on the TV.  
1
2
No separated audio connection is necessary.  
HDMI supports both audio and video.  
2. How to use  
I
HDMI HDMI1/2/3  
or  
INPUT  
button on the remote control.  
Select the  
input source on the TV using the  
I
Refer to the DVD player's manual for operating instructions.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
VCR SETUP  
(
To avoid picture noise interference , leave an adequate distance between the VCR and TV.  
)
I
I
If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.  
This phenomenon is common to all TVs and is not covered by warranty.  
Antenna Connection  
19/22LG3**  
26LG3**  
ANTENNA/  
CABLE IN  
ANTENNA/CABLE IN  
1
GITAL  
ANT OUT  
L
R
S-VIDEO  
VIDEO  
DIO OUT  
PTICAL  
1
AV IN  
ANT OUT  
ANT IN  
L
R
S-VIDEO  
VIDEO  
ANT IN  
OUTPUT  
SWITCH  
VIDEO  
AUDIO  
32C IN  
& SERVICE)  
AUDIO OUT  
OUTPUT  
SWITCH  
L(MONO)  
R
Wall Jack  
Antenna  
2
Wall Jack  
Antenna  
2
L
R
AUDIO  
(MONO)  
AUDIO  
VIDEO  
L
R
EO  
1. How to connect  
ANTENNA/CABLE IN  
Connect the RF antenna out socket of the VCR to the  
socket on the TV.  
1
2
Connect the antenna cable to the RF antenna in socket of the VCR.  
2. How to use  
I
Set VCR output switch to 3 or 4 and then tune TV to the same channel number.  
I
(
Insert a video tape into the VCR and press PLAY on the VCR. Refer to the VCR owner’s manual.  
)
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Composite (RCA) Connection  
19/22LG3**  
26LG3**  
L
R
ANT IN  
S-VIDEO  
VIDEO  
AV IN  
AUDIO IN  
IN  
S-VIDEO  
(RGB/DVI)  
VIDEO  
AUDIO  
ANT OUT OUTPUT  
SWITCH  
L(MONO)  
R
L
R
N
LY)  
AUDIO  
VIDEO  
ANTENNA/  
CABLE IN  
1
1
DIGITAL  
AUDIO OUT  
OPTICAL  
IO  
REMOTE  
CONTROL IN  
DVI)  
RS-232C IN  
(CONTROL & SERVE)  
AUDIO OUT  
L
R
ANT IN  
S-VIDEO  
VIDEO  
R
AUDIO  
ANT OUT OUTPUT  
SWITCH  
(MONO)  
AUDIO  
VIDEO L  
R
S-VIDEO  
1. How to connect  
AUDIO VIDEO  
jacks between TV and VCR. Match the jack colors (Video = yellow, Audio  
Connect the  
Left = white, and Audio Right = red)  
/
1
2. How to use  
(
Insert a video tape into the VCR and press PLAY on the VCR. Refer to the VCR owner’s manual.  
)
I
I
I
AV AV1  
or  
INPUT  
button on the remote control.  
Select the  
input source on the TV using the  
AV2  
AV IN2  
, select  
If connected to  
input source on the TV.  
AUDIO  
G If you have a mono VCR, connect the audio cable from the VCR to the  
L/MONO  
!
NOTE  
jack of the TV.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
S-Video Connection  
19/22LG3**  
26LG3**  
L
R
ANT IN  
S-VIDEO  
VIDEO  
AV IN  
AUDIO IN  
S-VIDEO  
(RGB/DVI)  
VIDEO  
AUDIO  
L(MONO)  
R
ANT OUT OUTPUT  
SWITCH  
AUDIO  
VEO  
)
ANTENNA/  
CABLE IN  
1
1
2
2
DIGITAL  
AUDIO OUT  
OPTICAL  
AUDIO  
REMOTE  
CONTROL IN  
GB/DVI)  
RS32C IN  
(CONT& SERVICE)  
AUDIO OUT  
L
R
L
R
ANT IN  
S-VIDEO  
VIDEO  
AUDIO  
(MONO)  
AUDIO  
VIDEO  
L
R
S-VIDEO  
ANT OUT OUTPUT  
SWITCH  
IN  
1. How to connect  
S -VIDEO  
Connect the S-VIDEO output of the VCR to the  
Connect the audio outputs of the VCR to the  
input on the TV.  
1
2
AUDIO  
input jacks on the TV.  
2. How to use  
(
Insert a video tape into the VCR and press PLAY on the VCR. Refer to the VCR owner’s manual.  
)
I
I
AV AV1  
or  
INPUT  
button on the remote control.  
Select the  
input source on the TV using the  
!
NOTE  
G The picture quality is improved: compared to normal composite (RCA cable) input.  
CAUTION  
G Do not connect to both Video and S-Video at the same time. In the event that you connect both  
Video and the S-Video cables, only the S-Video will work.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HEADPHONE SETUP (Only 19/22LG3**)  
You can listen to the sound through the headphone.  
1. How to connect  
Plug the headphone into the headphone socket.  
1
VOL  
To adjust the headphone volume, press the  
+ or  
button, the sound  
from the headphone is switched off.  
2
MUTE  
- button. If you press the  
HEADPHONE  
OTHER A/V SOURCE SETUP (Only 26LG3**)  
Camcorder  
1. How to connect  
Video Game Set  
AUDIO VIDEO  
jacks  
Connect the  
between TV and external equipment.  
/
1
Match the jack colors  
.
(
Video = yellow, Audio Left = white, and  
L
R
VIDEO  
)
Audio Right = red  
2. How to use  
I
AV2  
INPUT  
button on the remote control.  
Select the  
the  
input source on the TV using  
1
I
I
AV IN1  
AV1  
input, select the  
If connected to  
input source on the TV.  
Operate the corresponding external equipment.  
AV IN 2  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
AUDIO OUT CONNECTION (Only 26LG3**)  
Send the TV’s audio to external audio equipment via the Audio Output port.  
Analog  
RS-232C IN  
(CONTROL & SERVICE)  
AUDIO OUT  
1. How to connect  
R
AUDIO OUT  
Connect audio outputs to the TV’s  
jacks.  
1
2
AUDIO  
(MNO)  
AUDI
VIDEO L  
R
S-VIDEO  
Set the “TV Speaker option - Off” in the AUDIO menu.  
p.65). See the external audio equipment instruction  
manual for operation.  
1
(
G
Digital  
L
R
AUDIO  
1. How to connect  
Connect one end of the optical or coaxial cable to the  
OPTICAL DIGITAL AUDIO OUT  
1
2
3
TV’s  
port of  
.
Connect the other end of the optical cable to the digital  
audio input on the audio equipment.  
ANTENNA/  
CABLE IN  
DIGITAL  
AUDIO OUT  
OPTICAL  
DIO  
REMOTE  
CONTROL IN  
/DVI)  
Set the “TV Speaker option - Off” in the AUDIO menu. (G  
p.65). See the external audio equipment instruction manu-  
al for operation.  
1
RS-232C IN  
AUDIO OUT  
(CONTROL & RVICE)  
R
AUDIO  
(MONO)  
AUDIO  
VIDEO L  
R
S-VIDEO  
!
NOTE  
G When connecting with external audio equipments, such as  
amplifiers or speakers, you can turn the TV speakers off in  
2
the menu. (G p.65  
)
CAUTION  
G Do not look into the optical output port. Looking at the  
laser beam may damage your vision.  
G Block the SPDIF out (optical) about the contents with  
ACP(Audio Copy Protection) function.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PC SETUP  
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.  
VGA (D-Sub 15 pin) Connection  
19/22LG3**  
26LG3**  
RGB IN  
AUDIO IN  
(RGB/DVI)  
RGB(PC) IN  
S-VIDEO  
DMI/DVI IN  
AUDIO  
REMOTE  
CONTROL I  
RGB(PC)  
(RGB/DVI)  
MI/DVI IN  
(CO  
2
1
SERVICE  
ONLY  
)  
VIDEO  
PR  
L
R
AUDIO  
VIDEO  
COMPONENT IN  
1
2
1
2
RGB OUTPUT  
AUDIO  
RGB OUTPUT  
AUDIO  
1. How to connect  
(
RGB PC IN  
)
(
RGB PC  
)
Connect the VGA output of the PC to the  
or  
jack on the TV.  
1
2
(
AUDIO IN RGB/DVI  
)
(
AUDIO RGB/DVI  
)
Connect the PC audio output to the  
or  
jack on the TV.  
2. How to use  
I
Turn on the PC and the TV.  
I
RGB-PC  
INPUT  
button on the remote control.  
Select the  
input source on the TV using the  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
DVI to HDMI Connection  
19/22LG3**  
26LG3**  
RGB IN  
AUDIO  
REMO  
RGB(PC)  
CONTRO  
(RGB/DVI)  
AUDIO IN  
RGB(PC) IN  
S-V  
HDMI/DVI IN  
(RGB/DVI)  
HDMI/DVI IN  
2
1
2
1
Y
P
B
P
R
L
R
SCE  
LY  
RS-232C IN  
(SERVICE ONLY)  
AUDIO  
VIDEO  
COMPONENT IN  
VID  
1
2
2
1
AUDIO  
DVI-PC OUTPUT  
AUDIO  
DVI-PC OUTPUT  
1. How to connect  
HDMI/DVI IN HDMI/DVI IN 1/2/3  
or  
Connect the DVI output of the PC to the  
jack on the TV.  
1
2
(
AUDIO IN RGB/DVI  
)
(
AUDIO RGB/DVI  
)
Connect the PC audio output to the  
or  
jack on the TV.  
2. How to use  
I
Turn on the PC and the TV.  
I
HDMI HDMI1/2/3  
or  
INPUT  
button on the remote control.  
Select the  
input source on the TV using the  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
!
G To get the the best picture quality, adjust the PC G Avoid keeping a fixed image on the screen for a  
graphics card to 1440x900 (19LG3**), 1680x1050  
(22LG3**), 1360x768 (26LG3**).  
long period of time. The fixed image may become  
permanently imprinted on the screen.  
G Depending on the graphics card, DOS mode may G The synchronization input form for Horizontal and  
not work if a HDMI to DVI Cable is in use.  
Vertical frequencies is separate.  
G In PC mode, there may be noise associated with  
the resolution, vertical pattern, contrast or bright-  
ness. If noise is present, change the PC output to  
another resolution, change the refresh rate to  
another rate or adjust the brightness and contrast  
on the PICTURE menu until the picture is clear.  
Supported Display Specifications (RGB-PC, HDMI-PC)  
For 19/22LG3**  
For 26LG3**  
Horizontal  
(
Frequency KHz  
Vertical  
(
Frequency Hz  
Horizontal  
(
Frequency KHz  
Vertical  
(
Frequency Hz  
Resolution  
Resolution  
)
)
)
)
640x350  
720x400  
31.469  
70.08  
70.08  
59.94  
60.31  
60.00  
59.87  
60.01  
59.799  
59.90  
59.948  
59.954  
31.469  
31.469  
31.469  
37.879  
48.363  
47.776  
47.720  
47.130  
70.08  
70.08  
59.94  
60.31  
60.00  
59.87  
59.799  
59.65  
640x350  
720x400  
640x480  
31.469  
31.469  
37.879  
48.363  
47.776  
47.712  
47.720  
55.5  
640x480  
800x600  
1024x768  
1280x768  
800x600  
1024x768  
1280x768  
1360x768  
RGB-PC  
1360x768  
1366x768  
1360x768  
HDMI-PC  
1440x900  
* Only RGB-PC mode  
1400x1050  
(22LG3** only)  
64.744  
65.290  
1680x1050  
(22LG3** only)  
* Only RGB-PC mode  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
Screen Setup for PC mode  
Selecting Resolution  
You can choose the resolution in RGB-PC mode.  
Position Phase  
,
Size  
can also be adjusted.  
The  
, and  
Move  
Prev.  
MENU  
SCREEN  
PICTURE  
Move  
Enter  
E
Resolution  
G
1024 x 768  
1280 x 768  
1360 x 768  
1366 x 768  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
50  
50  
50  
0
Auto config.  
Position  
Size  
Only 26LG3**  
R
G
• Tint  
• Advanced Control  
• Reset  
Phase  
Screen (RGB-PC)  
Reset  
1
MENU  
PICTURE  
Select  
.
2
3
ENTER  
ENTER  
Screen (RGB-PC)  
Select  
Select  
.
Resolution  
.
4
5
Select the desired resolution.  
ENTER  
ENTER  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Configure  
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still  
not correct, try using the manual settings or a different resolution or refresh rate on the PC.  
Move  
Prev.  
MENU  
SCREEN  
PICTURE  
Move  
Enter  
E
Resolution  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
50  
50  
50  
0
Auto config.  
G
To Set  
Position  
Size  
R
G
• Tint  
Yes  
No  
• Advanced Control  
• Reset  
Phase  
Screen (RGB-PC)  
Reset  
1
2
3
MENU  
ENTER  
PICTURE  
Select  
.
I
I
If the position of the image is still not  
correct, try Auto adjustment again.  
Screen (RGB-PC)  
Select  
Select  
.
If picture needs to be adjusted again  
after Auto adjustment in RGB-PC, you  
ENTER  
ENTER  
ENTER  
Auto config.  
.
Position Size  
or  
can adjust the  
Phase  
,
.
4
5
Yes  
Select  
.
Start Auto Configuration.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
Adjustment for screen Position, Size, and Phase  
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture  
phase manually.  
This feature operates only in RGB-PC mode.  
Move  
Prev.  
MENU  
PICTURE  
Move  
Enter  
SCREEN  
E
Resolution  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
50  
50  
50  
0
Auto config.  
D
E
Position  
Size  
G
F
G
R
G
• Tint  
• Advanced Control  
• Reset  
Phase  
Reset  
Screen (RGB-PC)  
1
MENU  
ENTER  
ENTER  
PICTURE  
Select  
.
I
Position  
: This function is to adjust pic-  
ture to left/right and up/down as you  
prefer.  
2
3
Screen (RGB-PC)  
Select  
Select  
.
I
Size  
: This function is to minimize any  
vertical bars or stripes visible on the  
screen background. And the horizontal  
screen size will also change.  
Position Size  
,
Phase  
.
, or  
I
Phase  
: This function allows you to  
remove any horizontal noise and clear  
or sharpen the image of characters.  
4
5
ENTER  
ENTER  
Make appropriate adjustments.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screen Reset (Reset to original factory values)  
Position Size  
,
Phase  
to the default factory settings.  
Returns  
, and  
This feature operates only in RGB-PC mode.  
Move  
Prev.  
MENU  
PICTURE  
Move  
Enter  
SCREEN  
E
Resolution  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
50  
50  
50  
0
Auto config.  
Position  
Size  
To set  
R
G
• Tint  
Yes  
No  
• Advanced Control  
• Reset  
Phase  
Screen (RGB-PC)  
Reset  
G
1
MENU  
ENTER  
ENTER  
PICTURE  
Select  
.
2
3
Screen (RGB-PC)  
Select  
Select  
.
Reset  
.
4
5
ENTER  
ENTER  
Yes  
Select  
.
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV / CHANNEL CONTROL  
REMOTE CONTROL FUNCTIONS  
When using the remote control, aim it at the remote control sensor on the TV.  
Selects the factory preset picture depend on the viewing  
environment. Gp.52  
PICTURE  
SOUND  
SAP  
POWER  
TV  
INPUT  
RATIO  
Selects the factory preset sound for type of program.  
Gp.62  
PICTURE SOUND  
SAP  
Analog mode: Selects MTS sound (Mono, Stereo, or a  
p.67  
SAP) G  
1
4
7
-
2
5
8
0
3
6
DTV mode: Changes the audio language.  
RATIO  
p.50  
Change the aspect ratio.G  
9
VOLUME UP  
/DOWN  
Increase/decrease the sound level.  
FLASHBK  
p.41  
Scroll through the programmed Favorite channels. G  
FAV  
CC  
FAV  
CC  
p.70  
Select a closed caption. G  
VOL  
CH  
MUTE  
p.40  
Switch the sound on or off. G  
Select available channels.  
MUTE  
MENU  
Q.MENU  
RETURN  
CHANNEL  
UP/DOWN  
Q.MENU  
p.41  
Select the desired quick menu source. G  
Displays the main menu.  
MENU  
ENTER  
Allows the user to move return one step in an interactive  
application or other user interaction function.  
RETURN  
THUMBSTICK Navigate the on-screen menus and adjust the system set-  
(Up/Down/Left  
tings to your preference.  
Right/ENTER)  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER Turns your TV on or off.  
TV Returns to the last TV channel.  
INPUT External input modes rotate in regular sequence  
NUMBER button  
Used to enter a program number for multiple program channels such as 2-1, 2-2, etc.  
Tune to the last channel viewed.  
— (DASH)  
FLASHBK  
Installing Batteries  
I
Open the battery compartment cover on the back  
side and install the batteries matching correct  
(
polarity + with +, - with - .  
)
I
I
Install two 1.5V AAA batteries. Don’t mix old or  
used batteries with new ones.  
Close cover.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV / CHANNEL CONTROL  
TURNING ON TV  
First, connect power cord correctly.  
1
At this moment, the TV switches to standby mode.  
I
INPUT CH (  
+ or -  
)
In standby mode to turn TV on, press the  
POWER INPUT TV CH (  
+ or - ,  
,
,
)
button on the TV or press the  
,
,
,
Number (0 9)  
~
button on the remote control.  
INPUT  
Select the viewing source by using the  
trol.  
button on the remote con-  
2
3
I
This TV is programmed to remember which power state it was last set  
to, even if the power cord is out.  
POWER  
When finished using the TV, press the  
control. The TV reverts to standby mode.  
button on the remote  
!
NOTE  
G If you intend to be away on vacation, disconnect the power plug from the wall power outlet.  
CHANNEL SELECTION  
CH ( ) NUMBER  
+ or - or buttons to select a channel number.  
Press the  
1
VOLUME ADJUSTMENT  
Adjust the volume to suit your personal preference.  
VOL (+ -)  
or button to adjust the volume.  
Press the  
1
2
3
MUTE  
If you want to switch the sound off, press the  
button.  
MUTE VOL (+ -)  
or or  
You can cancel the Mute function by pressing the  
button.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK MENU / FAVORITE CHANNEL SETUP  
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.  
Q.Menu (Quick Menu) is a menu of features which users might use frequently.  
I
Aspect Ratio  
: Selects your desired picture format.  
Favorite Channle Setup  
I
I
I
Backlight  
: Adjust the brightness of LCD panel to  
control the brightness of the screen.  
Picture Mode  
1
1
4
7
2
5
8
0
3
6
9
or  
Select your desired channel.  
CH  
: Selects the factory preset picture  
depend on the viewing environment.  
Sound Mode  
2
: Selects the factory preset sound for  
type of program.  
Del/Add/Fav  
Select  
.
Q.MENU  
I
I
Caption  
: Select on or off.  
3
Favorite  
Select  
.
Multi Audio  
signal).  
: Changes the audio language (Digital  
SAP  
: Selects MTS sound (Analog signal).  
4
Return to TV viewing.  
Q.MENU  
I
I
Sleep Timer  
: Select the amount of time before  
your TV turns off automatically.  
Del/Add/Fav  
: Select channel you want to add/delete  
or add the channel to the Favorite List.  
I
FAV  
To tune to a favorite channel, press the  
(Favorite) button repeatedly.  
Q.Menu  
Aspect Ratio  
F
16:9  
G
Backlight  
3
Vivid  
Picture Mode  
Sound Mode  
Caption  
Standard  
Off  
English  
Off  
Multi Audio  
Sleep Timer  
Del/Add/Fav  
CH  
Add  
Close  
1
Q.MENU  
Display each menu.  
2
Make appropriate adjustments.  
Return to TV viewing  
3
Q.MENU  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV / CHANNEL CONTROL  
INITIAL SETTING  
This Function guides the user to easily set the essential items for viewing the TV for the first time when pur-  
chasing the TV. If will be displayed on the screen when turning the TV on for the first time. It can also be acti-  
vated from the user menus.  
I
Home  
Home  
” mode for the best picture in your  
Default selection is “  
home environment.  
”. We recommend setting the TV to “  
I
In-store  
Picture mode  
Picture  
“
” Mode is only intended for use in retail environments. Customers can adjust the “  
menu -  
” manually while inspecting the TV, but the TV will automatically return to preset in-store  
mode after 5 minutes.  
Step1. Mode setting  
1
2
Step1. Mode Setting  
Home  
Select  
Mode.  
Selecting the environment.  
Choose the setting mode you want.  
!
In Store  
Home  
ENTER  
Enter  
Exit  
RETURN  
Step2. Time setting  
1
Step2. Time Setting  
Auto Manual  
or  
Select  
.
F
Auto  
G
Current Time Setting  
Year  
2007  
11  
Month  
2
3
Date  
15  
Select desired time option.  
Hour  
5 PM  
52  
Minute  
Time Zone  
Daylight Saving  
Eastern  
Off  
ENTER  
Enter  
Exit  
RETURN  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step3. Option setting  
Step3. Option Setting  
1
OSD Language Setting  
Select  
Audio Language Setting  
.
or  
1. OSD Language Setting  
2. Audio Language Setting  
F
English  
G
French  
2
3
Enter  
Exit  
RETURN  
Select your desired language.  
ENTER  
Step4. Auto Tuning  
Step4. Auto Tuning  
1
ENTER  
Auto Tuning can change channel map.  
Do you want to start Auto Tuning?  
Auto Tuning  
.
Start  
Enter  
Enter  
RETURN  
Exit  
!
NOTE  
Initial Setting  
OPTION  
menu.  
• You can also adjust  
in the  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV / CHANNEL CONTROL  
ON-SCREEN MENUS SELECTION  
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.  
CHANNEL  
Move  
Enter  
PICTURE  
Move  
Enter  
AUDIO  
Move  
Enter  
Auto Tuning  
Manual Tuning  
Channel Edit  
Aspect Ratio : 16:9  
Picture Mode : Standard  
• Backlight  
Auto Volume : Off  
Balance  
L
R
0
80  
Sound Mode  
: Standard  
• Contrast  
90  
50  
60  
60  
0
• Treble  
• Bass  
• Reset  
: On  
50  
50  
• Brightness  
• Sharpness  
• Color  
TV Speaker  
R
G
• Tint  
E
TIME  
Move  
Enter  
Clock  
:
Feb/21/2008 2:10 AM  
Off Time  
On Time  
: Off  
: Off  
CHANNEL  
PICTURE  
OPTION  
AUDIO  
LOCK  
Sleep Timer : Off  
Auto Sleep : Off  
TIME  
OPTION  
Move  
Enter  
LOCK  
Move  
Enter  
Lock System  
Set Password  
Block Channel  
: Off  
Language  
Input Label  
Key Lock  
: English  
Lock System  
: Off  
Set Password  
: Off  
: Off  
: 1  
Block Channel  
Movie Rating  
TV Rating-English  
TV Rating-French  
Caption  
Set ID  
TV Rating-Children  
TV Rating-General  
Downloadable Rating  
Input Block  
Power Indicator  
Initial Setting  
: Home  
Downloadable Rating  
Input Block  
For USA  
For Canada  
1
2
3
4
MENU  
Display each menu.  
Select a menu item.  
!
NOTE  
G Auto Volume, TV Speaker, Power  
Indicator  
: Only 26LG3**.  
ENTER  
ENTER  
Set ID  
: Only 22LG30DC, 26LG3**.  
G
Enter to the pop up menu.  
MENU  
Return to TV viewing.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANNEL SETUP  
Auto Scan (Auto Tuning)  
Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the  
channel list.  
Run Auto Tuning again after any Antenna/Cable connection changes.  
CHANNEL  
Move  
Enter  
CHANNEL  
Move  
Enter  
Auto Tuning  
Manual Tuning  
Channel Edit  
Auto Tuning  
Manual Tuning  
Channel Edit  
Press ‘Yes’ button to begin  
auto tuning.  
Yes  
No  
1
MENU  
ENTER  
CHANNEL  
Select  
Select  
.
2
3
4
Auto Tuning  
.
I
A password is required to gain access to  
Auto Tuning menu if the Lock System is  
turned on.  
ENTER  
ENTER  
Yes  
Select  
.
Auto tuning  
Run  
.
5
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV / CHANNEL CONTROL  
Add/Delete Channel (Manual Tuning)  
If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality  
of the signal being received.  
CHANNEL  
Move  
Enter  
CHANNEL  
Move  
Enter  
Auto Tuning  
Manual Tuning  
Channel Edit  
Auto Tuning  
Manual Tuning  
Channel Edit  
F
G
DTV  
Select channel type and  
RF-channel number.  
Channel  
DTV 2-1  
2
Bad  
Normal  
Good  
Delete  
Close  
1
2
3
MENU  
ENTER  
CHANNEL  
Select  
.
Manual Tuning  
Select  
Select  
.
I
A password is required to gain access to  
Manual Tuning menu if the Lock System  
is turned on.  
ENTER  
DTV TV CADTV  
,
CATV  
.
,
, or  
4
5
Select channel you want to add  
or delete.  
ENTER  
Add  
Delete  
.
Select  
or  
6
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel Editing  
A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom  
List are displayed in black and the channels deleted from the Custom List are displayed in gray.  
Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-  
right corner of the screen.  
CHANNEL  
Move  
Enter  
Auto Tuning  
Manual Tuning  
Channel Edit  
+
-
Add/Delete  
Move Page  
MENU Previous  
RETURN Exit  
Move  
CH  
1
2
3
4
5
MENU  
ENTER  
CHANNEL  
Select  
Select  
.
Channel Edit  
.
ENTER  
ENTER  
Select a channel.  
Select channel you want to add or  
delete.  
Return to the previous menu.  
Return to TV viewing.  
MENU  
RETURN  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV / CHANNEL CONTROL  
INPUT LIST  
19/22LG3**  
TV  
AV  
Component  
RGB-PC  
HDMI  
26LG3**  
Antenna  
Cable  
AV1  
AV2  
Component1  
1
ENTER  
INPUT  
Select the desired input source.  
19/22LG3**:  
TV  
AV  
Component  
RGB-PC  
AV1  
HDMI  
26LG3**:  
Antenna  
Cable  
AV2  
Component1  
Component2  
HDMI3  
HDMI2  
HDMI1  
RGB-PC  
ie)  
Select a desired input source (except  
Antenna, Cable or TV). Then, you can  
select your desired Input Label with using  
Q.MENU button. G p.49  
TV  
AV  
Component  
RGB-PC  
HDMI  
Q.MENU Input Label  
RETURN  
Exit  
I
I
Antenna  
Component  
: Select them to watch DVD or a  
Digital set-top box.  
: Select it to watch over-the-air broadcasts.  
: Select it to watch cable and digital cable.  
: Select it to watch over-the-air, cable and dig-  
I
Cable  
I
I
RGB-PC  
: Select it to view PC input.  
I
TV  
HDMI  
devices.  
ital cable broadcasts.  
AV  
: Select them to watch high definition  
I
: Select them to watch a VCR or other external  
equipment.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INPUT LABEL  
You can set a label for each input source when it's not in use.  
OPTION  
Move  
Enter  
OPTION  
Move  
Enter  
Language  
Input Label  
Key Lock  
: English  
Language  
Input Label  
Key Lock  
: English  
F
G
F
G
AV  
AV1  
Component  
RGB-PC  
HDMI  
AV2  
: Off  
: Off  
: 1  
: Off  
: Off  
: 1  
Caption  
Caption  
Component1  
Component2  
RGB-PC  
HDMI1  
HDMI2  
HDMI3  
Set ID  
Set ID  
Power Indicator  
Initial Setting  
Power Indicator  
Initial Setting  
: Home  
: Home  
Close  
Close  
19/22LG3**  
26LG3**  
With using OPTION menu  
With using INPUT button  
1
1
OPTION  
Select  
Select  
.
Select the source.  
MENU  
INPUT  
2
3
4
5
2
ENTER  
Input Label  
.
Select the label.  
Q.MENU  
3
ENTER  
Select the source.  
RETURN  
Return to the previous menu.  
MENU  
Return to TV viewing  
Select the label.  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
PICTURE SIZE (ASPECT RATIO) CONTROL  
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.  
ꢀ
RGB-PC input source use 4:3 or 16:9 aspect ratio.  
!
NOTE  
G If a fixed image is displayed on the screen for a long time, the image could become imprinted on the  
screen and remain visible.  
This phenomenon is common to all manufacturers and is not covered by warranty. Although, after watch-  
ing video that did not fill the screen, any after-image from the black bars will normally dissipate after a few  
minutes.  
19/22LG3**  
Q.Menu  
Set By Program  
4:3  
16:9  
Full  
Aspect Ratio  
F
16:9  
G
Backlight  
3
Vivid  
Picture Mode  
Sound Mode  
Caption  
Just Scan  
Zoom2  
Zoom1  
Standard  
Off  
English  
Off  
Multi Audio  
Sleep Timer  
Del/Add/Fav  
26LG3**  
CH  
Add  
Set By Program  
4:3  
16:9  
Close  
Just Scan  
Zoom2  
Zoom1  
1
RATIO  
Select the desired picture format.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set by program  
Selects the proper picture proportion to match  
the source’s image.  
Zoom 1  
Choose Zoom 1 when you want to view the pic-  
ture without any alteration. However, the top and  
bottom portions of the picture will be cropped.  
(4:3 4:3)  
19/22LG3** (16:9 16:9)  
26LG3** (16:9 16:9)  
Zoom 2  
Choose Zoom 2 when you want the picture to be  
altered, both vertically extended and cropped.  
The picture taking a halfway trade off between  
alteration and screen coverage.  
4:3  
Choose 4:3 when you want to view a picture  
with an original 4:3 aspect ratio.  
Just Scan  
Following selection will lead to you view the pic-  
ture of best quality without loss of original pic-  
ture in high resolution image.  
16:9  
Adjust the picture horizontally, in a linear pro-  
portion to fill the entire screen.  
Notes: If there are noise in original picture, you  
can see the noise at the edge.  
19/22LG3**  
26LG3**  
Just Scan  
operates only in  
DTV/CADTV/Component/HDMI-DTV/DVI-DTV  
(720p/1080i/1080p) input source.  
Full (19/22LG3** only)  
When TV receives the wide screen signal, it will lead  
you to adjust the picture horizontally or vertically,  
in a linear proportion, to fill the entire screen fully.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
PRESET PICTURE SETTINGS  
Picture Mode - Preset  
There are factory presets for picture settings available in the user menus. You can use a preset, change each  
setting manually.  
Q.Menu  
Aspect Ratio  
16:9  
Backlight  
3
F
Vivid  
G
Picture Mode  
Sound Mode  
Caption  
Vivid  
Standard  
Cinema  
Sport  
Standard  
Off  
English  
Off  
Multi Audio  
Sleep Timer  
Del/Add/Fav  
Game  
CH  
Add  
Close  
1
PICTURE  
Vivid Standard Cinema  
,
Select  
Sport  
,
Game  
,
, or  
.
2
ꢀ
Vivid Standard Cinema Sport  
,
Game  
,
Settings are preset for the opti-  
,
, or  
RETURN  
Return to TV viewing.  
mum picture quality at the factory and  
are not adjustable.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Color Tone - Preset  
Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to  
cool to see less intense colors with more blue.  
PICTURE  
Move  
Enter  
PICTURE  
Move  
Enter  
E
E
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
50  
50  
50  
50  
0
Color Temperature  
F
Medium  
Off  
G
Fresh Contrast  
Fresh Color  
Off  
R
G
• Tint  
• Tint  
Noise Reduction  
• Advanced Co
Off  
• Advanced Control  
• Reset  
• Reset  
Gamma  
Medium  
Low  
Off  
Screen (RGB-PC)  
Screen (RGB-PC)  
Black Level  
Eye Care  
Real Cinema  
Off  
Close  
1
2
MENU  
ENTER  
PICTURE  
Select  
Select  
.
Advanced Control  
.
3
4
5
ENTER  
Color Temperature  
Select  
.
Cool Medium  
,
Warm  
.
Select  
, or  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
MANUAL PICTURE ADJUSTMENT  
Picture Mode - User Mode  
Adjust the picture appearance to suit your preference and viewing situations.  
PICTURE  
Move  
Enter  
Aspect Ratio : 16:9  
Picture Mode : Standard  
• Backlight  
E
80  
90  
• Backlight  
80  
• Contrast  
• Brightness 50  
E
Enter  
• Sharpness  
• Color  
60  
60  
0
R
G
• Tint  
E
1
MENU  
PICTURE  
Select  
Select  
.
2
3
ENTER  
ENTER  
Picture Mode  
.
Vivid Standard Cinema Sport  
, or  
Game  
.
Select  
Select  
,
,
,
4
5
ENTER  
ENTER  
Backlight Contrast Brightness  
,
,
,
Sharpness Color  
Tint  
.
,
, or  
Make appropriate adjustments.  
6
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE IMPROVEMENT TECHNOLOGY  
Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection.  
Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors.  
Noise Reduction: Removes interference up to the point where it does not damage the original picture.  
Gamma: High gamma values display whitish images and low gamma values display high contrast images.  
PICTURE  
Move  
Enter  
PICTURE  
Move  
Enter  
E
E
Color Temperature  
Fresh Contrast  
Fresh Color  
Medium  
Off  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
50  
50  
50  
0
50  
50  
50  
0
F
G
Off  
Noise Reduction  
Off  
R
G
R
• Tint  
• Tint  
Gamma  
Medium  
Low  
Off  
• Advanced Control  
• Reset  
• Advanced Control  
• Reset  
Black Level  
Eye Care  
Screen (RGB-PC)  
Screen (RGB-PC)  
Real Cinema  
Off  
Close  
1
PICTURE  
Select  
.
MENU  
ENTER  
2
3
Advanced Control  
Select  
Select  
.
ENTER  
Fresh Contrast Fresh Color  
,
Noise Reduction  
,
Gamma  
.
, or  
4
5
Select your desired options.  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
ADVANCED CONTROL - BLACK (DARKNESS) LEVEL  
Adjusting the contrast and the brightness of the screen using the black level of the screen.  
This feature is disable in DTV and RGB-PC mode.  
PICTURE  
Move  
Enter  
PICTURE  
Move  
Enter  
E
E
Color Temperature  
Fresh Contrast  
Fresh Color  
Medium  
Off  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
50  
50  
50  
0
50  
50  
50  
0
Off  
Noise Reduction  
Off  
R
G
• Tint  
• Tint  
Gamma  
Medium  
Low  
Off  
• Advanced Control  
• Reset  
• Advanced Contro
• Reset  
Black Level  
Eye Care  
F
G
Screen (RGB-PC)  
Screen (RGB-PC)  
Real Cinema  
Off  
Close  
1
2
PICTURE  
Select  
.
MENU  
ENTER  
ꢀ
Low  
darker.  
: The reflection of the screen gets  
Advanced Control  
Select  
Select  
.
ꢀ
ꢀ
High  
: The reflection of the screen gets  
brighter.  
Auto  
: Realizing the black level of the  
3
4
5
ENTER  
screen and set it to High or Low auto-  
matically.  
Black Level  
.
Low High  
or  
Select  
.
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED CONTROL - EYE CARE - Only 26LG3**  
Dims extremely bright pictures.  
Picture Mode-Vivid Cinema  
”.  
This feature is disable in “  
,
PICTURE  
Move  
Enter  
PICTURE  
Move  
Enter  
E
E
Color Temperature  
Fresh Contrast  
Fresh Color  
Medium  
Off  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
50  
50  
50  
0
50  
50  
50  
0
Off  
Noise Reduction  
Off  
R
G
• Tint  
• Tint  
Gamma  
Medium  
Low  
Off  
• Advanced Control  
• Reset  
• Advanced Contro
• Reset  
Black Level  
Eye Care  
F
G
Screen (RGB-PC)  
Screen (RGB-PC)  
Real Cinema  
Off  
Close  
1
2
PICTURE  
Select  
.
MENU  
ENTER  
Advanced Control  
Select  
Select  
.
3
4
5
ENTER  
Eye Care  
.
On Off  
or  
Select  
.
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
ADVANCED CONTROL - REAL CINEMA  
Set up the TV for the best picture appearance for viewing movies.  
When you operate Real Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps  
video from movies to 30 fps video for display.  
This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i,  
and HDMI 1080i mode.  
PICTURE  
Move  
Enter  
PICTURE  
Move  
Enter  
E
• Contrast  
• Brightness  
• Sharpness  
• Color  
E
50  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
Color Temperature  
Fresh Contrast  
Fresh Color  
Medium  
Off  
50  
50  
50  
0
50  
50  
50  
0
Off  
Noise Reduction  
Off  
R
G
• Tint  
• Tint  
Gamma  
Medium  
Low  
Off  
• Advanced Control  
• Reset  
• Advanced Control  
• Reset  
Black Level  
Eye Care  
Screen (RGB-PC)  
Screen (RGB-PC)  
Real Cinema  
F
Off  
G
Close  
1
2
PICTURE  
Select  
.
MENU  
ENTER  
Advanced Control  
Real Cinema.  
Select  
Select  
.
3
4
5
ENTER  
On Off  
or  
Select  
.
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE RESET  
Settings of the selected picture modes return to the default factory settings.  
PICTURE  
Move  
Enter  
PICTURE  
Move  
Enter  
E
E
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
• Contrast  
• Brightness  
• Sharpness  
• Color  
50  
50  
50  
50  
0
50  
50  
50  
R
G
• Tint  
• Tin
i
Resetting video configuration...  
• Advanced Control  
• Reset  
• Ad
• Reset  
Screen (RGB-PC)  
Screen (RGB-PC)  
1
2
MENU  
ENTER  
PICTURE  
Select  
Select  
.
Reset  
.
3
4
ENTER  
MENU  
Initialize the adjusted value.  
Return to TV viewing.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
POWER INDICATOR - Only 26LG3**  
OPTION  
Move  
Enter  
OPTION  
Move  
Enter  
Language  
Input Label  
Key Lock  
: English  
Language  
Input Label  
Key Lock  
: English  
: Off  
: Off  
: 1  
: Off  
: Off  
: 1  
Caption  
Caption  
Set ID  
Set ID  
Power Indicator  
Initial Setting  
Power Indicator  
Initial Setting  
Standby Light  
: Ho
F
On  
On  
G
: Home  
Power Light  
Close  
1
2
3
MENU  
ENTER  
OPTION  
Select  
Select  
Select  
.
Power Indicator  
.
ENTER  
ꢀ
Off  
: Power/Standby indicator will turn off.  
Standby Light  
Power Light  
.
or  
ꢀ
On  
: Power/Standby indicator will turn on.  
4
5
Select your desired options.  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND & LANGUAGE CONTROL  
AUTO VOLUME LEVELER (AUTO VOLUME) - Only 26LG3**  
Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a  
regular TV program.  
AUDIO  
Move  
L
Enter  
R
AUDIO  
Move  
Enter  
Auto Volume : On  
Balance  
Auto Volume : On  
Balance  
Off  
L
0
0
On  
Sound Mode  
: Standard  
Sound Mode  
: Standard  
• Treble  
• Bass  
• Reset  
: On  
50  
50  
• Treble  
• Bass  
• Reset  
: On  
50  
50  
TV Speaker  
TV Speaker  
1
2
AUDIO  
Select  
.
MENU  
ENTER  
Auto Volume  
Select  
Select  
.
3
4
ENTER  
On Off  
or  
.
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND & LANGUAGE CONTROL  
PRESET SOUND SETTINGS (SOUND MODE)  
Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate  
sound options based on the program content.  
Standard Music Cinema Sport  
,
Game  
are preset for optimum sound quality at the factory and are  
,
not adjustable.  
,
, and  
Q.Menu  
Aspect Ratio  
16:9  
Standard  
Game  
Music  
Cinema  
Sport  
Backlight  
3
Vivid  
Picture Mode  
Sound Mode  
Caption  
F
Standard G  
Off  
English  
Off  
Multi Audio  
Sleep Timer  
Del/Add/Fav  
CH  
Add  
Close  
1
2
SOUND  
Standard Music Cinema  
,
Select  
Sport  
,
,
Game  
, or  
.
RETURN  
Return to TV viewing.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND SETTING ADJUSTMENT - USER MODE  
Adjust the sound to suit your taste and room situations.  
AUDIO  
Move  
L
Enter  
R
AUDIO  
Move  
Enter  
Auto Volume : On  
Balance  
Auto Volume : On  
Balance  
Treble 50  
0
0
Sound Mode  
: Standard  
Sound Mode  
: Standard  
Bass 50  
• Treble  
• Bass  
• Reset  
: On  
50  
50  
• Treble  
• Bass  
• Reset  
: On  
50  
50  
Close  
TV Speaker  
TV Speaker  
1
2
AUDIO  
Select  
Select  
Select  
.
MENU  
ENTER  
Sound Mode  
.
3
4
5
6
ENTER  
ENTER  
Standard Music  
,
, or  
,
Cinema Sport  
Game  
.
,
Treble Bass  
or  
Select  
.
Make appropriate adjustments.  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND & LANGUAGE CONTROL  
BALANCE  
Adjust the left/right sound of speaker to suit your taste and room situations.  
AUDIO  
Move  
L
Enter  
R
AUDIO  
Move  
Enter  
Auto Volume : On  
Balance  
Auto Volume : On  
Balance  
0
0
L
R
Balance  
0
Sound Mode  
: Standard  
Sound Mode  
: Standard  
• Treble  
• Bass  
• Reset  
: On  
50  
50  
• Treble  
• Bass  
• Reset  
: On  
50  
50  
Close  
TV Speaker  
TV Speaker  
1
2
AUDIO  
Select  
.
MENU  
ENTER  
Balance  
Select  
.
3
4
ENTER  
Make appropriate adjustments.  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV SPEAKERS ON/OFF SETUP - Only 26LG3**  
Turn the TV speakers off if using external audio equipment.  
AUDIO  
Move  
L
Enter  
R
AUDIO  
Move  
L
Enter  
R
Auto Volume : On  
Balance  
Auto Volume : On  
Balance  
0
0
Sound Mode  
: Standard  
Sound Mode  
: Standard  
• Treble  
• Bass  
• Reset  
: On  
50  
50  
• Treble  
• Bass  
• Reset  
: On  
50  
50  
TV Speaker  
TV Speaker  
Off  
On  
1
2
MENU  
ENTER  
AUDIO  
Select  
Select  
.
TV Speaker  
.
3
4
ENTER  
On Off  
or  
Select  
.
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND & LANGUAGE CONTROL  
AUDIO RESET  
Settings of the selected Sound Mode return to the default factory settings.  
AUDIO  
Move  
L
Enter  
R
AUDIO  
Move  
L
Enter  
R
Auto Volume : On  
Balance  
Auto Volume : On  
Balance  
0
0
Sound Mode  
: Standard  
Sound Mode  
: Standard  
• Treble  
• Bass  
• Reset  
: On  
50  
50  
• Treble  
• Bass  
• Reset  
: On  
50  
50  
i
Resetting audio configuration.  
TV Speaker  
TV Speaker  
1
2
3
MENU  
ENTER  
AUDIO  
Select  
.
Reset  
Select  
.
ENTER  
MENU  
Initialize the adjusted value.  
Return to TV viewing.  
4
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEREO/SAP BROADCAST SETUP  
For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom-  
panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used  
if the broadcast is only in Mono.  
Q.Menu  
Aspect Ratio  
16:9  
Backlight  
3
Vivid  
Picture Mode  
Sound Mode  
Caption  
Standard  
Off  
F
English G  
Off  
Multi Audio  
Sleep Timer  
Del/Add/Fav  
CH  
Add  
Close  
Analog TV  
Digital TV  
1
1
SAP  
Select  
.
Q.MENU  
Multi Audio  
Select  
.
Q.MENU  
2
2
Mono Stereo  
,
SAP  
.
Select  
, or  
Select other languages.  
Return to TV viewing.  
3
3
Q.MENU  
Return to TV viewing.  
Q.MENU  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND & LANGUAGE CONTROL  
AUDIO LANGUAGE  
Other languages may be available if a digital signal is provided by the broadcasting station.  
This feature operates only in DTV/CADTV mode.  
OPTION  
Move  
Enter  
OPTION  
Move  
Enter  
Language  
Input Label  
Key Lock  
: English  
Language  
Input Label  
Key Lock  
: Engli
English  
English  
Menu  
Audio  
F
G
: Off  
: Off  
: 1  
: Off  
: Off  
: 1  
Caption  
Caption  
Close  
Set ID  
Set ID  
Power Indicator  
Initial Setting  
Power Indicator  
Initial Setting  
: Home  
: Home  
1
2
3
OPTION  
Select  
Select  
Select  
.
MENU  
ENTER  
Language  
.
ENTER  
Audio  
.
4
5
Select your desired language:  
English Spanish French  
,
, or  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ON-SCREEN MENUS LANGUAGE SELECTION  
The menus can be shown on the screen in the selected language.  
OPTION  
Move  
Enter  
OPTION  
Move  
Enter  
Language  
Input Label  
Key Lock  
: English  
Language  
Input Label  
Key Lock  
: Engl
F
English  
English  
G
Menu  
Audio  
: Off  
: Off  
: 1  
: Off  
: Off  
: 1  
Caption  
Caption  
Close  
Set ID  
Set ID  
Power Indicator  
Initial Setting  
Power Indicator  
Initial Setting  
: Home  
: Home  
1
2
MENU  
ENTER  
OPTION  
Select  
Select  
.
Language  
.
3
4
ENTER  
Menu  
Select  
.
Select your desired language.  
From this point on, the on-screen menus  
will be shown in the selected language.  
5
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND & LANGUAGE CONTROL  
CAPTION MODE  
Caption must be provided to help people with hearing loss watch TV.  
1
ꢀ
Off  
When selecting  
, Sub-menus for  
On Off  
or  
Select Caption  
.
CC  
Analog, DTV, and Digital Option  
become disabled.  
Analog Broadcasting System Captions  
Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying cap-  
tioning information if provided on a program. Analog caption displays information at any position on the screen  
and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both  
digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode  
Caption  
On  
.
which was last set when you turned the power off. This function is only available when  
Mode is set  
OPTION  
Move  
Enter  
OPTION  
Move  
Enter  
Language  
Input Label  
Key Lock  
: English  
Language  
Input Label  
Key Lock  
: English  
: Off  
: Off  
: 1  
: Off  
: CC1  
: 1  
F
On  
G
Caption  
Caption  
Set ID  
Set ID  
Mode  
CC1  
Power Indicator  
Initial Setting  
Power Indicator  
Initial Setting  
Digital Option  
Close  
: Home  
: Home  
1
2
3
OPTION  
Select  
Select  
Select  
Select  
.
MENU  
ENTER  
Caption  
ꢀ
CAPTION  
The term for the words that scroll  
across the bottom of the TV screen;  
usually the audio portion of the pro-  
gram provided for the hearing impaired.  
ENTER  
On  
.
4
5
ꢀ
TEXT  
CC1 4 Text1 4  
or - .  
-
The term for the words that appear in a  
large black frame and almost cover the  
entire screen; usually messages provid-  
ed by the broadcaster.  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Broadcasting System Captions  
Choose the language you want the DTV/CADTV Captions to appear in.  
Other Languages can be chosen for digital sources only if they are included on the program.  
This function in only available when Caption Mode is set On.  
OPTION  
Move  
Enter  
OPTION  
Move  
Enter  
Language  
Input Label  
Key Lock  
: English  
Language  
Input Label  
Key Lock  
: English  
: Off  
: Off  
: 1  
: Off  
: CC1  
: 1  
F
On  
G
Caption  
Caption  
Set ID  
Set ID  
Mode  
CC1  
Power Indicator  
Initial Setting  
Power Indicator  
Initial Setting  
Digital Option  
Close  
: Home  
: Home  
1
2
3
OPTION  
Select  
.
MENU  
ENTER  
Caption  
Select  
.
ENTER  
On  
Select  
Select  
.
4
5
CC1 4 Text1 4  
- , - , or  
Service1 6  
-
.
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND & LANGUAGE CONTROL  
Caption Option  
Customize the DTV/CADTV captions that appear on your screen.  
This function in only available when Caption Mode is set On.  
F
Custom  
G
Size  
A
Standard  
Font 1  
White  
Solid  
OPTION  
Move  
Enter  
OPTION  
Move  
Enter  
Font  
Language  
Input Label  
Key Lock  
: English  
Language  
Input Label  
Key Lock  
: English  
Text Color  
Text Opacity  
Bg Color  
Bg Opacity  
Edge Type  
Edge Color  
: Off  
: Off  
: 1  
: Off  
: CC1  
: 1  
Black  
Caption  
Caption  
On  
Solid  
Set ID  
Set ID  
Mode  
CC1  
Power Indicator  
Initial Setting  
Power Indicator  
Initial Setting  
None  
Digital Option  
Close  
: Home  
: Home  
Black  
Close  
Only for 26LG3**  
1
2
3
4
5
6
OPTION  
Select  
Select  
.
MENU  
ꢀ
Size  
: Set the word size.  
ꢀ
ꢀ
Font  
: Select a typeface for the text.  
ENTER  
ENTER  
Caption  
.
Text Color  
text.  
: Choose a color for the  
ꢀ
ꢀ
ꢀ
Text Opacity  
for the text color.  
: Specify the opacity  
On  
Select  
.
Bg (Background) Color  
background color.  
: Select a  
Digital Option  
Select  
.
Bg (Background) Opacity  
: Select  
the opacity for the background color.  
ꢀ
ꢀ
Edge Type  
: Select an edge type.  
: Select a color for the  
ENTER  
Custom  
Select  
.
Edge Color  
edges.  
Style Font  
, etc., to your  
Customize the  
,
preference. A preview icon is provided at  
the bottom of the screen, use it to see the  
caption language.  
7
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIME SETTING  
CLOCK SETTING  
Auto Clock Setup  
The time is set automatically from a digital channel signal.  
The digital channel signal includes information for the current time provided by the broadcasting station.  
Set the clock manually if the current time is set incorrectly by the auto clock function.  
TIME  
Move  
Enter  
TIME  
Move  
Enter  
Feb/21/2F
Auto  
G
Clock  
:
Feb/21/2008 2:10 AM  
Clock  
:
Off Time  
On Time  
: Off  
: Off  
Off Time  
On Time  
: Off  
: Off  
Year  
2008  
2
Month  
Date  
Sleep Timer : Off  
Auto Sleep : Off  
Sleep Timer : Off  
Auto Sleep : Off  
21  
Hour  
2 AM  
10  
Minute  
Time Zone  
Eastern  
Auto  
Daylight  
Saving  
Close  
1
2
3
4
TIME  
Select  
Select  
.
MENU  
ENTER  
Clock  
.
ENTER  
Auto  
Select  
.
Select your viewing area time zone.  
Eastern Central Mountain  
• U.S.A:  
Pacific Alaska  
,
, or  
,
,
,
Hawaii  
.
,
Eastern Central Mountain  
,
• Canada: ,  
Pacific New F.land  
Atlantic  
.
,
, or  
5
6
Auto Off  
,
whether or not your viewing area observes  
Daylight Saving time).  
On  
Select  
, or  
(depending on  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIME SETTING  
Manual Clock Setup  
If the current time setting is wrong, reset the clock manually.  
TIME  
Move  
Enter  
TIME  
Move  
Enter  
Clock  
:
Feb/21/2008 2:10 AM  
Clock  
:
Feb/21/20
F
Manual  
G
Off Time  
On Time  
: Off  
: Off  
Off Time  
On Time  
: Off  
: Off  
Year  
2008  
2
Month  
Date  
Sleep Timer : Off  
Auto Sleep : Off  
Sleep Timer : Off  
Auto Sleep : Off  
21  
Hour  
2 AM  
10  
Minute  
Time Zone  
Eastern  
Auto  
Daylight  
Saving  
Close  
1
2
3
TIME  
Select  
Select  
Select  
.
MENU  
ENTER  
Clock  
.
ENTER  
Manual  
.
4
5
Select the Year, Month, Date, Hour, or Minutes  
option.  
Set the Year, Month, Date, Hour, or Minutes  
option.  
6
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTO ON/OFF TIME SETTING  
This function operates only if the current time has been set.  
Off Time  
On Time  
The  
function overrides the  
function if they are both set to the same time.  
On Time  
The TV must be in standby mode for the  
to work.  
On Time  
If you do not press any button within 2 hours after the TV turns on with the  
automatically revert to standby mode.  
function, the TV will  
TIME  
Move  
Enter  
TIME  
Move  
Enter  
Clock  
:
Feb/21/2008 2:10 AM  
Clock  
:
Feb/21/2008 2:10 AM  
Off Time  
On Time  
: Off  
: Off  
Off Time  
On Time  
: Off  
Repeat  
F
G
Once  
: 6:30 AM
Hour  
6 AM  
Sleep Timer : Off  
Auto Sleep : Off  
Sleep Timer : Off  
Auto Sleep : Off  
Minute  
30  
Input  
TV  
TV 2-0  
30  
Channel  
Volume  
Close  
1
2
3
ꢀ
ꢀ
On/Off Time  
Off  
.
To cancel  
function, select  
TIME  
Select  
Select  
Select  
.
MENU  
ENTER  
Only for On Time function  
1
ENTER  
Input  
Select  
.
Off time On time  
or  
.
2
TV  
AV  
,
.
19/22LG3**: Select  
,
ENTER  
Repeat  
.
Component RGB-PC HDMI  
,
, or  
TV AV1-2  
,
26LG3**: Select  
Component1-2 RGB-PC  
, or  
,
4
5
6
Off Once Everyday Mon Fri  
, ~  
Mon Sat Weekend  
Select  
,
,
,
,
,
Sunday  
.
~
, or  
HDMI1-3  
.
3
4
TV  
When Selecting  
:
Hour Minute  
or  
Select and set  
.
set the channel at turn-on.  
Adjust to sound level at  
turn-on.  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIME SETTING  
SLEEP TIMER SETTING  
The Sleep Time turns the TV off at the preset time.  
Note that this setting is cleared when the TV is turned off.  
TIME  
Move  
Enter  
TIME  
Move  
Enter  
Clock  
:
Feb/21/2008 2:10 AM  
Clock  
:
Feb/21/2008 2:10 AM  
Off Time  
On Time  
: Off  
: Off  
Off Time  
On Time  
: Off  
: Off  
Sleep Timer : Off  
Auto Sleep : Off  
Sleep Timer : Off  
Auto Sleep : Off  
F
Off  
G
Close  
1
2
3
TIME  
Select  
.
MENU  
ENTER  
Sleep Timer  
Select  
Select  
.
Off 10 20 30 60 90  
,
,
,
,
,
,
ENTER  
120 180  
240  
minutes.  
,
, or  
ꢀ
Sleep Timer  
You can also adjust  
Q.Menu.  
in  
the  
4
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTO SHUT-OFF SETTING  
TV will be automatically turned off, in case of no signal for 10 minutes.  
TIME  
Move  
Enter  
TIME  
Move  
Enter  
Clock  
:
Feb/21/2008 2:10 AM  
Clock  
:
Feb/21/2008 2:10 AM  
Off Time  
On Time  
: Off  
: Off  
Off Time  
On Time  
: Off  
: Off  
Sleep Timer : Off  
Auto Sleep : Off  
Sleep Timer : Off  
Auto Sleep : On  
Off  
On  
TV will be automatically turned off,  
in case of No Signal for 10 minutes.  
1
2
3
4
TIME  
Select  
Select  
Select  
.
MENU  
ENTER  
Auto Sleep  
.
ENTER  
On Off  
or  
.
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARENTAL CONTROL / RATINGS  
Parental Control can be used to block specific channels, ratings and other viewing sources.  
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad-  
casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the  
type of the program and the categories. It is also possible to block all program viewing for a time period. To use  
this function, the following must be done :  
1. Set ratings and categories to be blocked.  
2. Specify a password  
3. Enable the lock  
V-Chip rating and categories  
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be  
blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-  
(
)
video movies use the Movie Rating System MPAA only.  
Ratings for Television programs including made-for-TV movies:  
ꢀ
ꢀ
ꢀ
(
TV-G General audience  
)
ꢀ
ꢀ
ꢀ
(
TV-MA Mature audience only  
)
(
TV-PG Parental guidance suggested  
)
( )  
All children  
TV-Y  
)
TV-Y7 Children 7 years older  
(
TV-14 Parents strongly cautioned  
)
(
SET PASSWORD & LOCK SYSTEM  
Setting up Your Password  
Set up blocking schemes to block specific channels, ratings, and external viewing sources.  
A password is required to gain access to this menu.  
For USA  
For Canada  
LOCK  
Move  
Enter  
LOCK  
Move  
Enter  
Enter Password  
Lock System  
: Off  
Lock System  
: Off  
Set Password  
Set Password  
*
*
*
*
Block Channel  
Movie Rating  
Block Channel  
TV Rating-English  
TV Rating-French  
Close  
TV Rating-Children  
TV Rating-General  
Downloadable Rating  
Input Block  
Downloadable Rating  
Input Block  
1
2
ENTER  
MENU  
LOCK  
Select  
.
ꢀ
Enter the password as requested.  
ꢀ
The TV is set up with the initial password  
“0-0-0-0”.  
1
2
5
8
0
3
4
7
6
9
Input the password.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lock System  
Enables or disables the blocking scheme you set up previously.  
LOCK  
Move  
Enter  
LOCK  
Move  
Enter  
Lock System  
: Off  
Lock System  
: On  
Off  
On  
Set Password  
Set Password  
Block Channel  
Movie Rating  
Block Channel  
Movie Rating  
TV Rating-Children  
TV Rating-General  
TV Rating-Children  
TV Rating-General  
Downloadable Rating  
Input Block  
Downloadable Rating  
Input Block  
1
ENTER  
MENU  
LOCK  
Select  
.
2
3
4
1
2
5
8
0
3
4
7
6
9
Input the password.  
Lock System  
Select  
.
ENTER  
ꢀ
On  
When you select  
is enable.  
, the Lock System  
On Off  
or  
Select  
.
5
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARENTAL CONTROL / RATINGS  
Set Password  
Change the password by inputting a new password twice.  
LOCK  
Move  
Enter  
LOCK  
Move  
Enter  
Lock System  
: Off  
Lock System  
: Off  
Set Password  
Set Password  
New  
Confirm  
*
*
*
*
*
*
*
*
Block Channel  
Movie Rating  
Block Channel  
Movie Rating  
TV Rating-Children  
TV Rating-General  
TV Rating-Children  
TV Rating-General  
Close  
Downloadable Rating  
Input Block  
Downloadable Rating  
Input Block  
1
2
ENTER  
MENU  
LOCK  
Select  
.
1
2
5
8
0
3
4
7
6
9
Input the password.  
3
4
Set password  
Select  
.
1
4
7
2
5
8
0
3
6
9
Choose any 4 digits for your new password.  
As soon as the 4 digits are entered, re-enter  
Confirm  
ENTER  
the same 4 digits on the  
.
5
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANNEL BLOCKING  
Blocks any channels that you do not want to watch or that you do not want your children to watch.  
LOCK  
Move  
Enter  
Lock System  
: Off  
Set Password  
Block Channel  
Movie Rating  
TV Rating-Children  
TV Rating-General  
Downloadable Rating  
Input Block  
+
-
Block/Unblock  
Move Page  
MENU Previous  
RETURN Exit  
Move  
CH  
1
ENTER  
MENU  
LOCK  
Select  
.
2
3
4
1
2
5
8
0
3
4
7
6
9
Input the password.  
Block Channel  
Select  
.
ENTER  
ENTER  
Select a channel to block or  
unblock it.  
5
6
Block or unblock a channel.  
MENU  
Return to the previous menu.  
Return to TV viewing.  
RETURN  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARENTAL CONTROL / RATINGS  
MOVIE & TV RATING  
Movie Rating (MPAA) - Only for USA  
Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can  
set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that  
the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.  
LOCK  
Move  
Enter  
LOCK  
Move  
Enter  
Blocking off : Permits all programs  
Lock System  
: Off  
Lock System  
: Off  
G
Set Password  
Set Password  
PG  
Block Channel  
Movie Rating  
Block Channel  
Movie Rating  
PG-13  
R
TV Rating-Children  
TV Rating-General  
TV Rating-Children  
TV Rating-General  
NC-17  
X
Downloadable Rating  
Input Block  
Downloadable Rating  
Input Block  
Blocking Off  
1
2
ENTER  
MENU  
LOCK  
Select  
.
ꢀ
G (General audience)  
1
2
5
8
0
3
4
7
6
9
Input the password.  
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
PG (Parental guidance suggested)  
PG-13 (Parents strongly cautioned)  
R (Restricted)  
3
4
Movie Rating  
Select  
.
NC-17 (No one 17 and under admitted)  
X (Adult only)  
Blocking Off (Permits all programs)  
ENTER  
G PG PG-13 R NC-17  
, ,  
X
.
Select  
,
,
or  
G If you set PG-13: G and PG movies will  
be available, PG-13, R, NC-17 and X will  
be blocked.  
5
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Rating Children - Only for USA  
Prevents children from watching certain children's TV programs, according to the ratings limit set. The children  
rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi-  
ences in the TV Rating - sub menu, your children can view those programs.  
LOCK  
Move  
Enter  
LOCK  
Move  
Enter  
Lock System  
: Off  
Lock System  
: Off  
Set Password  
Set Password  
Block Channel  
Movie Rating  
Block Channel  
Movie Rating  
TV Rating-Children  
TV Rating-General  
TV Rating-Children  
TV Rating-General  
Downloadable Rating  
Input Block  
Age  
Fantasy Violence  
Downloadable Rating  
Input Block  
Close  
1
ENTER  
MENU  
LOCK  
Select  
.
2
3
4
1
2
5
8
0
3
4
7
6
9
Input the password.  
TV Rating-Children  
Select  
.
ꢀ
Age (applies to TV-Y, TV-Y7)  
ENTER  
ENTER  
Age Fantasy Violence  
or  
Select  
.
ꢀ
Fantasy Violence (applies to TV-Y7)  
5
6
Select block options.  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARENTAL CONTROL / RATINGS  
TV Rating General - Only for USA  
Based on the ratings, blocks certain TV programs that you and your family do not want to view.  
LOCK  
Move  
Enter  
LOCK  
Move  
Enter  
Lock System  
: Off  
Lock System  
: Off  
Set Password  
Set Password  
Age  
Block Channel  
Movie Rating  
Block Channel  
Movie Rating  
Dialogue  
Language  
Sex  
TV Rating-Children  
TV Rating-General  
TV Rating-Children  
TV Rating-General  
Violence  
Downloadable Rating  
Input Block  
Downloadable Rating  
Input Block  
Close  
1
2
ENTER  
MENU  
LOCK  
Select  
.
1
2
5
8
0
3
4
7
6
9
Input the password.  
3
4
TV Rating-General  
Select  
.
ꢀ
Age (applies to TV-G,TV-PG,TV-14,TV-  
MA).  
Age Dialogue Language  
,
Select ,  
Sex Violence  
,
ENTER  
ENTER  
or  
.
ꢀ
ꢀ
ꢀ
ꢀ
Dialogue-sexual dialogue (applies to  
TV-PG,TV-14).  
5
6
Language-adult language (applies to  
TV-PG, TV-14, TV-MA).  
Select block options.  
Sex-sexual situations (applies to TV-PG,  
TV-14, TV-MA).  
Violence (applies to TV-PG, TV-14, TV-  
MA).  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Rating English - Only for CANADA  
Selecting canadian english language rating system.  
Blocking off : Permits all programs  
LOCK  
Move  
Enter  
LOCK  
Move  
Enter  
E
Lock System  
: Off  
Lock System  
: Off  
C
Set Password  
Set Password  
C8+  
G
Block Channel  
TV Rating-English  
TV Rating-French  
Block Channel  
TV Rating-English  
TV Rating-French  
PG  
14+  
18+  
Downloadable Rating  
Input Block  
Downloadable Rating  
Input Block  
Blocking Off  
1
ENTER  
MENU  
LOCK  
Select  
.
ꢀ
2
3
4
E (Exempt)  
1
2
5
8
0
3
4
7
6
9
Input the password.  
ꢀ
ꢀ
ꢀ
C (Children)  
C8+ (Children eight years and older)  
G (General programming, suitable for  
all audiences)  
TV Rating-English  
Select  
.
ꢀ
ꢀ
ꢀ
ꢀ
PG (Parental Guidance)  
E
14+ 18+  
C
C8+ G PG  
,
Select  
,
,
,
,
,
.
14+ (Viewers 14 years and older)  
18+ (Adult programming)  
ENTER  
Blocking Off  
, or  
Blocking Off (Permits all programs)  
5
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARENTAL CONTROL / RATINGS  
TV Rating French - Only for CANADA  
Selecting canadian french language rating system.  
Blocking off : Permits all programs  
LOCK  
Move  
Enter  
LOCK  
Move  
Enter  
E
Lock System  
: Off  
Lock System  
: Off  
G
Set Password  
Set Password  
8ans+  
13ans+  
16ans+  
18ans+  
Block Channel  
TV Rating-English  
TV Rating-French  
Block Channel  
TV Rating-English  
TV Rating-French  
Downloadable Rating  
Input Block  
Downloadable Rating  
Input Block  
Blocking Off  
1
ENTER  
MENU  
LOCK  
Select  
.
ꢀ
E (Exempt)  
G (General)  
2
3
4
1
2
5
8
0
3
4
7
6
9
Input the password.  
ꢀ
ꢀ
8ans+ (General-Not convenient for lit-  
tle children)  
TV Rating-French  
Select  
.
ꢀ
ꢀ
ꢀ
ꢀ
13ans+ (Not convenient for children of  
13 years and younger)  
16ans+ (Not convenient for children of  
16 years and younger)  
E G 8ans+ 13ans+  
Select ,  
16ans+ 18ans+  
,
,
, or  
,
ENTER  
Blocking off  
.
,
18ans+ (This programs is only for  
adults)  
5
Blocking off (Permits all programs)  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DOWNLOADABLE RATING  
This function may become available in the future and will be available only for digital channel signal.  
This function operates only when TV has received Region5 Rating data.  
LOCK  
Move  
Enter  
LOCK  
Move  
Enter  
E
Lock System  
: Off  
Lock System  
: Off  
Humor  
Set Password  
Set Password  
Sports  
Cruelty  
Language  
Sadness  
Genre  
Block Channel  
Movie Rating  
Block Channel  
Movie Rating  
TV Rating-Children  
TV Rating-General  
TV Rating-Children  
TV Rating-General  
Downloadable Rating  
Input Block  
Downloadable Rating  
Input Block  
Age  
E
Close  
ꢀ
Based on rating table, your TV's OSD  
(On Screen Display) may differ slightly  
from what is shown in this manual.  
1
2
ENTER  
MENU  
LOCK  
Select  
.
1
2
5
8
0
3
4
7
6
9
Input the password.  
3
4
Downloadable Rating  
Select  
.
ENTER  
ENTER  
Downloadable  
Select desired  
Rating  
option.  
5
6
Select desired option and block it.  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARENTAL CONTROL / RATINGS  
EXTERNAL INPUT BLOCKING  
Enables you to block an input.  
LOCK  
Move  
Enter  
LOCK  
Move  
Enter  
Lock System  
: Off  
Lock System  
: Off  
AV1  
AV  
F
G
Off  
Set Password  
Set Password  
F
G
Off  
AV2  
Block Channel  
Movie Rating  
Block Channel  
Movie Rating  
Off  
Component  
RGB-PC  
HDMI  
Off  
Component1  
Component2  
RGB-PC  
HDMI1  
HDMI2  
HDMI3  
Off  
Off  
Off  
Off  
Off  
Off  
Off  
Off  
TV Rating-Children  
TV Rating-General  
TV Rating-Children  
TV Rating-General  
Downloadable Rating  
Input Block  
Downloadable Rating  
Input Block  
Close  
Close  
19/22LG3**  
26LG3**  
1
ENTER  
MENU  
LOCK  
Select  
.
2
3
4
1
2
5
8
0
3
4
7
6
9
Input the password.  
Input Block  
Select  
.
ENTER  
Select input source.  
5
6
On Off  
or  
Select  
.
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KEY LOCK  
The TV can be set up so that it can only be used with the remote control.  
This feature can be used to prevent unauthorized viewing by locking out the front panel controls.  
This TV is programmed to remember which option it was last set to even if you turn the TV off.  
OPTION  
Move  
Enter  
OPTION  
Move  
Enter  
Language  
Input Label  
Key Lock  
: English  
Language  
Input Label  
Key Lock  
: English  
Off  
On  
: Off  
: Off  
: 1  
: On  
: Off  
: 1  
Caption  
Caption  
Set ID  
Set ID  
Power Indicator  
Initial Setting  
Power Indicator  
Initial Setting  
: Home  
: Home  
1
2
3
MENU  
ENTER  
OPTION  
Select  
Select  
.
Key Lock  
.
ꢀ
Key Lock On  
’, iftheTVisturned  
In  
off, press the / I, INPUT, CH + or -  
‘
r
(
button on the TV or POWER, INPUT,  
)
ENTER  
On Off  
or  
Select  
.
(
)
CH + or - or NUMBER buttons on the  
remote control.  
4
ꢀ
Key Lock On  
With the  
, the display  
’ appears on the screen if  
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing.  
Key Lock  
‘
!
any button on the front panel is pressed  
while viewing the TV.  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
TROUBLESHOOTING  
The operation does not work normally.  
ꢀ
Check to see if there is any object between the product and the remote control  
causing obstruction. Ensure you are pointing the remote control directly at the TV.  
Ensure that the batteries are installed with correct polarity (+ to +, - to -).  
Ensure that the correct remote operating mode is set: TV, VCR etc.  
Install new batteries.  
The remote control  
doesn’t work  
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Is the sleep timer set?  
Power is suddenly  
turned off  
Check the power control settings. Power interrupted.  
The video function does not work.  
ꢀ
Check whether the product is turned on.  
ꢀ
ꢀ
ꢀ
ꢀ
Try another channel. The problem may be with the broadcast.  
Is the power cord inserted into wall power outlet?  
Check your antenna direction and/or location.  
No picture &No sound  
Test the wall power outlet, plug another product’s power cord into the outlet  
where the product’s power cord was plugged in.  
ꢀ
Picture appears slowly  
after switching on  
This is normal, the image is muted during the product startup process. Please  
contact your service center, if the picture has not appeared after five minutes.  
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Adjust Color in menu option.  
Keep a sufficient distance between the product and the VCR.  
Try another channel. The problem may be with the broadcast.  
Are the video cables installed properly?  
No or poor color  
or poor picture  
Activate any function to restore the brightness of the picture.  
Horizontal/vertical bars  
or picture shaking  
ꢀ
Check for local interference such as an electrical appliance or power tool.  
ꢀ
ꢀ
ꢀ
Station or cable product experiencing problems, tune to another station.  
Station signal is weak, reorient antenna to receive weaker station.  
Check for sources of possible interference.  
Poor reception on  
some channels  
Lines or streaks  
in pictures  
ꢀ
ꢀ
Check antenna (Change the direction of the antenna).  
Check HDMI cable over version 1.3.  
No picture  
The HDMI cables don’t support HDMI version 1.3, it cause flickers or no screen  
display. In this case use the latest cables that support HDMI version 1.3.  
when connecting HDMI  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The audio function does not work.  
ꢀ
Press the VOL or VOLUME button.  
ꢀ
ꢀ
ꢀ
Sound muted? Press MUTE button.  
Picture OK & No sound  
Try another channel. The problem may be with the broadcast.  
Are the audio cables installed properly?  
No output from one  
of the speakers  
ꢀ
ꢀ
Adjust Balance in menu option.  
A change in ambient humidity or temperature may result in an unusual noise  
when the product is turned on or off and does not indicate a fault with the  
product.  
Unusual sound from  
inside the product  
ꢀ
Check HDMI cable over version 1.3.  
Check USB cable over version 2.0.  
No sound  
when connecting HDMI  
or USB  
ꢀ
ꢀ
Use normal MP3 file.  
*This feature is not available for all models.  
There is a problem in PC mode. (Only PC mode applied)  
ꢀ
Adjust resolution, horizontal frequency, or vertical frequency.  
The signal is out of range  
ꢀ
Check the input source.  
Vertical bar or stripe on  
background &  
Horizontal Noise &  
Incorrect position  
ꢀ
Work the Auto configure or adjust clock, phase, or H/V position. (Option)  
ꢀ
ꢀ
Check the signal cable.  
Screen color is unstable  
or single color  
Reinstall the PC video card.  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
MAINTENANCE  
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can  
enjoy your new TV.  
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.  
Cleaning the Screen  
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm  
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then  
use it to wipe the screen.  
1
2
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.  
Cleaning the Cabinet  
ꢀ
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.  
ꢀ
Please be sure not to use a wet cloth.  
Extended Absence  
CAUTION  
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug  
the power cord to protect against possible damage from lightning or power surges.  
G
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRODUCT SPECIFICATIONS  
22LG30 (22LG30-UA)  
22LG31 (22LG31-UB)  
22LG30DC (22LG30DC-UA)  
26LG30 (26LG30-UA/UD)  
26LG30DC(26LG30DC-UA)  
19LG30 (19LG30-UA)  
19LG31 (19LG31-UB)  
MODELS  
18.0 x 15.3 x 7.4 inches  
20.5 x 16.9 x 7.4 inches  
26.1 x 20.0 x 8.9 inches  
Dimensions  
(Width x Height  
x Depth)  
With stand  
458.8 x 391.0 x 189.2 mm 522.2 x 431.5 x 189.2 mm 663.3 x 508.2 x 227.3 mm  
Without stand  
18.0 x 13.5 x 3.3 inches  
20.5 x 15.1 x 3.3 inches  
26.1 x 17.6 x 3.1 inches  
458.8 x 344.5 x 85.4 mm 522.2 x 384.2 x 84.2 mm 663.3 x 449.8 x 80.0 mm  
With stand  
11.0 pounds / 5.0 kg  
10.3 pounds / 4.7 kg  
12.3 pounds / 5.6 kg  
11.6 pounds / 5.3 kg  
22.2 pounds / 10.1 kg  
18.9 pounds / 8.6 kg  
Weight  
Without stand  
Power requirement  
Television System  
Program Coverage  
AC100-240V ~ 50/60Hz  
NTSC-M, ATSC, 64 & 256 QAM  
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135  
75 ohm  
External Antenna Impedance  
Operating Temperature  
32 ~ 104°F (0 ~ 40°C)  
Less than 80%  
Operating Humidity  
Environment  
condition  
Storage Temperature  
Storage Humidity  
-4 ~ 140°F (-20 ~ 60°C)  
Less than 85%  
ꢀ
The specifications shown above may be changed without prior notice for quality improvement.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
EXTERNAL CONTROL THROUGH RS-232C  
- Only 26LG30/30DC, 22LG30DC  
The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer  
or an A/V control system) to control the TV’s functions externally.  
ꢀ
Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software.  
The instructions below are provided to help with programming software or to test functionality using telenet  
software.  
RS-232C Setup  
i.e)  
IN  
DIGITAL  
AUDIO OUT  
OPTICAL  
AUDIO  
REMOTE  
CONTROL IN  
(RGB/DVI)  
RS-232C IN  
(CONTROL & SERVICE)  
AUDIO OUT  
PR  
L
R
AUDIO  
(MONO)  
AUDIO  
EO L  
R
ONENT IN  
PC  
Communication Parameters  
Type of Connector; D-Sub 9-Pin Male  
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
(
Baud rate : 9600 bps UART  
)
No.  
Pin Name  
Data length : 8 bits  
Parity : None  
1
2
3
4
5
6
7
8
9
No connection  
(
RXD Receive data  
)
Stop bit : 1 bit  
(
TXD Transmit data  
)
Communication code : ASCII code  
Use a crossed (reverse) cable.  
(
DTR DTE side ready  
)
GND  
(
DSR DCE side ready  
)
!
(
RTS Ready to send  
)
NOTE  
(
CTS Clear to send  
)
G This product has command echo back in the  
RS-232C Command.  
No Connection  
1
5
6
9
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RS-232C Configurations  
Either cable below can be used.  
7-Wire Configuration  
3-Wire Configurations  
(
(
)
)
Serial female-female NULL modem cable  
Not standard  
PC  
TV  
PC  
TV  
RXD  
TXD  
GND  
DTR  
DSR  
RTS  
2
3
5
4
6
7
8
3
2
5
6
4
8
7
TXD  
RXD  
TXD  
GND  
DTR  
DSR  
RTS  
2
3
5
4
6
7
8
3
2
5
6
4
7
8
TXD  
RXD  
GND  
DTR  
DSR  
RTS  
RXD  
GND  
DSR  
DTR  
CTS  
RTS  
CTS  
CTS  
CTS  
D-Sub 9  
D-Sub 9  
D-Sub 9  
D-Sub 9  
Set ID  
Use this function to specify a TV ID number.  
p.98  
Refer to ‘Real Data Mapping1’. G  
.
OPTION  
Move  
Enter  
OPTION  
Move  
Enter  
Language  
Input Label  
Key Lock  
: English  
Language  
Input Label  
Key Lock  
: English  
: Off  
: Off  
: 1  
: Off  
: Off  
: 1  
Caption  
Caption  
Set ID  
Set ID  
Power Indicator  
Initial Setting  
Power Indicator  
Initial Setting  
: Home  
: Home  
F
1
G
Close  
1
2
3
MENU  
ENTER  
OPTION  
Select  
Select  
.
Set ID  
.
Choose the desired TV ID number.  
ENTER  
The adjustment range of Set ID is  
1~99.  
4
RETURN  
MENU  
Return to the previous menu.  
Return to TV viewing  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Command Reference List  
DATA  
(Hexadecimal)  
DATA  
(Hexadecimal)  
COMMAND1 COMMAND2  
COMMAND1 COMMAND2  
01. Power  
k
a
b
c
d
e
f
00 ~ 01  
14. Treble  
k
k
r
s
00 ~ 64  
00 ~ 64  
00 ~ 64  
00 ~ 02  
02. Input Select  
03. Aspect Ratio  
04. Screen Mute  
05. Volume Mute  
06. Volume Control  
07. Contrast  
x
k
k
k
k
k
k
k
k
k
k
(
(
G p.97)  
G p.97)  
15. Bass  
16. Balance  
k
t
00 ~ 01  
00 ~ 01  
00 ~ 64  
00 ~ 64  
00 ~ 64  
00 ~ 64  
00 ~ 64  
00 ~ 64  
00 ~ 01  
17. Color Temperature  
18. Auto Configuration  
20. Channel Add/Del  
21. Key  
k
u
u
b
c
g
j
(
G p.98)  
m
m
m
00 ~ 01  
g
h
i
(
G p.99)  
08. Brightness  
09. Color  
22. Backlight  
00 ~ 64  
10. Tint  
j
11. Sharpness  
12. OSD Select  
13. Remote Control  
Lock Mode  
k
l
00 ~ 01  
k
m
DATA00  
DATA01  
DATA02  
DATA03  
DATA04  
DATA05  
COMMAND1 COMMAND2  
(Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal)  
physical major  
program high program low  
major low minor high minor low  
attribute  
19. Channel Tuning  
m
a
Transmission / Receiving Protocol  
Transmission  
* In this model, TV will not send the status during the standby mode.  
* Data Format  
[Command1][Command2][ ][Set ID][ ][Data][Cr]  
[Command 1] : First command to control the set.(j, k, m or x)  
[Command 2] : Second command to control the set.  
[Command 2] : Use as command.  
[SetID]:Usethesmallcharacter,ifsetIDis10,itwillsendthe‘0’,‘a’.  
[DATA]:Usethesmallcharacter,ifdatais0xab,itwillsendthe‘a’,‘b’.  
[OK] : Use the large character.  
[Set ID] : You can adjust the set ID to choose desired TV ID  
number in Setup menu. Adjustment range is 1~ 99.  
WhenselectingSetID‘0’,everyconnectedtheTVis  
(
)
controlled. Set ID is indicated as decimal 1~ 99 on  
Error Acknowledgement  
(
)
menu and as Hexa decimal 0x0~0x63 on transmission  
/receiving protocol.  
[Command2][ ][Set ID][ ][NG][Data][x]  
[DATA] : To transmit the command data.  
Transmit the ‘FF’ data to read status of command.  
[Cr] : Carriage Return  
The TV transmits ACK (acknowledgement) based on this for-  
mat when receiving abnormal data from non-viable functions  
or communication errors.  
ASCII code ‘0x0D’  
Data1: Illegal Code  
[
] : ASCII code ‘space (0x20)’  
Data2: Not supported function  
* In this model, TV will not send the status during the standby mode.  
Data3: Wait more time  
* In this model, TV will not send the status during the standby mode.  
* Data Format  
OK Acknowledgement  
[Command 2] : Use as command.  
[SetID]:Usethesmallcharacter,ifsetIDis10,itwillsendthe‘0’,‘a’.  
[DATA]:Usethesmallcharacter,ifdatais0xab,itwillsendthe‘a’,‘b’.  
[NG] : Use the large character  
[Command2][ ][Set ID][ ][OK][Data][x]  
The TV transmits ACK (acknowledgement) based on this for-  
mat when receiving normal data. At this time, if the data is  
data read mode, it indicates present status data. If the data is  
data write mode, it returns the data of the PC computer.  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01. Power (Command: k a)  
06. Volume Control (Command: k f)  
To adjust volume.  
To control Power On/Off of the TV.  
Transmission [k][a][ ][Set ID][ ][Data][Cr]  
You can also adjust volume with the volume buttons on  
remote control.  
Data 00: Power Off  
Data 01: Power On  
Transmission [k][f][ ][Set ID][ ][Data][Cr]  
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]  
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)  
*Referto‘Realdatamapping’.Seepage98.  
* In a like manner, if other functions transmit ‘FF’ data  
based on this format, Acknowledgement data feedback  
presents status about each function.  
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]  
* Note: In this model, TV will send the Acknowledge  
after power on processing completion.  
07. Contrast (Command: k g)  
To adjust screen contrast.  
There might be a time delay between command and  
acknowledge.  
You can also adjust contrast in the PICTURE menu.  
Transmission [k][g][ ][Set ID][ ][Data][Cr]  
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)  
*Referto‘Realdatamapping’.Seepage98.  
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]  
02. Input Select (Command: x b)  
To select input source for TV.  
Transmission [x][b][ ][Set ID][ ][Data][Cr]  
Data 00: DTV (Antenna) Data 01: DTV (Cable)  
Data 10: Analog (Antenna) Data 11: Analog (Cable)  
08. Brightness (Command: k h)  
To adjust screen brightness.  
Data 20: AV/AV1  
Data 21: AV2  
You can also adjust brightness in the PICTURE menu.  
Transmission [k][h][ ][Set ID][ ][Data][Cr]  
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)  
*Referto‘Realdatamapping’.Seepage98.  
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]  
Data 40: Component/ Component1 Data 41: Component 2  
Data 60: RGB-PC  
Data 91: HDMI2  
Data 90: HDMI/HDMI1  
Data 92: HDMI3  
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]  
* Data21, 41, 91, 92 : Except 22LG30DC  
09. Color (Command: k i)  
03. Aspect Ratio (Command: k c)  
To adjust the screen format.  
To adjust screen color.  
You can also adjust color in the PICTURE menu.  
Transmission [k][i][ ][Set ID][ ][Data][Cr]  
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)  
*Referto‘Realdatamapping’.Seepage98.  
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]  
Transmission [k][c][ ][Set ID][ ][Data][Cr]  
Data 01: 4:3  
02: 16:9  
06: Set by program  
08: Full (Only 22LG3DC)  
09: Just scan  
04: Zoom 1  
05: Zoom 2  
Reserved  
10. Tint (Command: k j)  
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]  
To adjust screen tint.  
You can also adjust tint in the PICTURE menu.  
Transmission [k][j][ ][Set ID][ ][Data][Cr]  
Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)  
*Referto‘Realdatamapping’.Seepage98.  
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]  
04. Screen Mute (Command: k d)  
To select screen mute on/off.  
Transmission [k][d][ ][Set ID][ ][Data][Cr]  
Data 00: Screen mute off (Picture on)  
Data 01: Screen mute on (Picture off)  
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]  
11. Sharpness (Command: k k)  
To adjust screen sharpness.  
05. Volume Mute (Command: k e)  
To control volume mute on/off.  
You can also adjust sharpness in the PICTURE menu.  
Transmission [k][k][ ][Set ID][ ][Data][Cr]  
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)  
*Referto‘Realdatamapping’.Seepage98.  
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]  
You can also adjust mute using the MUTE button on  
remote control.  
Transmission [k][e][ ][Set ID][ ][Data][Cr]  
Data 00: Volume mute on (Volume off)  
Data 01: Volume mute off (Volume on)  
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
12. OSD Select (Command: k l)  
18. Auto Configuration (Command: j u)  
To select OSD (On Screen Display) on/off.  
To adjust picture position and minimize image shaking  
automatically. Auto configuration only works in RGB-PC  
mode.  
Transmission [k][l][ ][Set ID][ ][Data][Cr]  
Data 00: OSD off  
Data 01: OSD on  
Transmission [ j ][u][ ][Set ID][ ][Data][Cr]  
Data 01: To set  
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]  
13. Remote Control Lock Mode (Command: k m)  
To lock the remote control and the front panel controls  
on the set.  
*Real data mapping  
0 : Step 0  
Transmission [k][m][ ][Set ID][ ][Data][Cr]  
Data 00: Lock off  
Data 01: Lock on  
A : Step 10 (SET ID 10)  
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]  
If you’re not using the remote control and front panel  
controls on the TV, use this mode. When main power is  
on/off, remote control lock is released.  
F : Step 15 (SET ID 15)  
10 : Step 16 (SET ID 16)  
14. Treble (Command: k r)  
63 : Step 99 (SET ID 99)  
64 : Step 100  
To adjust treble.  
You can also adjust treble in the AUDIO menu.  
Transmission [k][r][ ][Set ID][ ][Data][Cr]  
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)  
*Refer to ‘Real data mapping’ as shown.  
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]  
19. Channel Tuning (Command: m a)  
To tune channel to following physical/major/minor number.  
Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]  
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]  
Digital channels have a Physical, Major, and Minor channel  
number. The Physical number is the actual digital channel  
number, the Major is the number that the channel should  
be mapped to, and the Minor is the sub-channel. Since  
the ATSC tuner automatically maps the channel to the  
Major number, the Physical number is not required when  
sending a command.  
15. Bass (Command: k s)  
To adjust bass.  
You can also adjust bass in the AUDIO menu.  
Transmission [k][s][ ][Set ID][ ][Data][Cr]  
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)  
*Refer to ‘Real data mapping’ as shown.  
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]  
Data 00: Physical Channel Number  
NTSC air: 02~45, NTSC cable: 01, 0E~7D  
ATSC air: 01~45, ATSC cable: 01~87  
Data 01 & 02: Major Channel Number  
16. Balance (Command: k t)  
To adjust balance.  
Data 01: High byte  
Data 02: Low byte  
You can also adjust balance in the AUDIO menu.  
Transmission [k][t][ ][Set ID][ ][Data][Cr]  
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)  
*Refer to ‘Real data mapping’ as shown.  
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]  
Two bytes are available for the Major and Minor, nor-  
mally only the second byte is used.  
Data 03 & 04: Minor Channel Number  
Not needed for NTSC.  
17. Color Temperature (Command: k u)  
To adjust color temperature.  
You can also adjust color temperature in the PICTURE menu.  
Transmission [k][u][ ][Set ID][ ][Data][Cr]  
Data 00: Medium 01: Cool 02: Warm  
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Data5:  
Main/Sub  
Picture  
Two/One  
Part Channel  
Using Physical  
Channel  
4
Reserved  
3
2
1
0
7
6
5
Step  
x
x
x
x
x
x
x
x
x
x
0
0
0
0
0
0
0
0
x
0
0
0
0
1
1
1
1
x
0
0
1
1
0
0
1
1
x
0
1
0
1
0
1
0
1
x
0
1
Main  
Sub  
0
1
Two  
One  
0
1
Use  
NTSC Air  
NTSC Cable  
ATSC Air  
No Use  
ATSC Cable_std  
ATSC Cable_hrc  
ATSC Cable_irc  
ATSC cable_auto  
Reserved  
...  
Reserved  
1
1
1
1
20. Channel Add/Del (Command: m b)  
To add and delete the channels.  
The table above lists the binary code which must be  
converted to Hexadecimal before sending. For example:  
The binary code to tune the sub source to an NTSC  
cable channel is “1000 0001”, which translates to “81”  
in Hex.  
Transmission [m][b][ ][Set ID][ ][Data][Cr]  
Data 00: Channel Delete Data 01: Channel Add  
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]  
* 7th bit : For which source do you want to change the  
channel.  
21. Key (Command: m c)  
* 6th bit: Use a two part or one part channel. Most cases  
just use 0 since it’s ignored when using NTSC.  
To send IR remote key code.  
Transmission [m][c][ ][Set ID][ ][Data][Cr]  
* 5th bit: Use 0 with NTSC since it can only use the phys-  
ical channel number. Normally use 1 for ATSC since most  
times it doesn’t matter what the physical number is.  
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]  
* 4th bit: Set to 0.  
Code  
(Hexa)  
Code  
(Hexa)  
Remote control  
Remote control  
* 3-0 bits: Choose signal type.  
0F  
TV  
40  
41  
07  
06  
44  
43  
45  
52  
4D  
5B  
0A  
1A  
0B  
08  
INPUT  
POWER  
RATIO  
Number Key 0-9  
- (Dash)  
MUTE  
VOL +  
VOL -  
* Tune Command Examples:  
1. Tune to the analog (NTSC) cable channel 35.  
Data 00 = Physical of 35 = 23  
79  
10-19  
4C  
09  
02  
03  
00  
01  
ENTER  
Data 01 & 02 = No Major = 00 00  
Data 03 & 04 = No Minor = 00 00  
Data 05 = 0000 0001 in binary = 01  
Total = ma 00 23 00 00 00 00 01  
MENU  
Q.MENU  
SOUND  
PICTURE  
RETURN  
SAP  
2. Tune to the digital (ATSC) local channel 30-3.  
Data 00 = Don’t know Physical = 00  
Data 01 & 02 = Major is 30 = 00 1E  
Data 03 & 04 = Minor is 3 = 00 03  
Data 05 = 0010 0010 in binary = 22  
Total = ma 00 00 00 1E 00 03 22  
CH +  
CH -  
1E  
FAV  
FLASHBK  
39  
CC  
22. Backlight (Command: m g)  
To adjust screen backlight.  
Acknowledgement[a][ ][Set ID][ ][OK][Data00][Data01]  
Transmission [m][g][ ][Set ID][ ][Data][Cr]  
Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)  
*Referto‘Realdatamapping’.Seepage98.  
[Data02][Data03][Data04][x][a][ ][Set ID]  
[ ][NG][Data00][x]  
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
OPEN SOURCE LICENSE - This feature is not available for all models.  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51  
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
the program proprietary. To prevent this, we have made it clear  
that any patent must be licensed for everyone's free use or not  
licensed at all.  
Everyone is permitted to copy and distribute verbatim copies of  
this license document, but changing it is not allowed.  
The precise terms and conditions for copying, distribution and  
modification follow.  
Preamble  
GNU GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION  
AND MODIFICATION  
The licenses for most software are designed to take away your  
freedom to share and change it. By contrast, the GNU General  
Public License is intended to guarantee your freedom to share  
and change free software - to make sure the software is free for  
all its users. This General Public License applies to most of the  
Free Software Foundation's software and to any other program  
whose authors commit to using it. (Some other free software  
foundation software is covered by the GNU Lesser General Public  
License instead.) You can apply it to your programs, too.  
0. This license applies to any program or other work which con-  
tains a notice placed by the copyright holder saying it may be  
distributed under the terms of this General Public License. The  
"Program", below, refers to any such program or work, and a  
"work based on the Program" means either the Program or any  
derivative work under copyright law: that is to say, a work con-  
taining the Program or a portion of it, either verbatim or with  
modifications and/or translated into another language.  
(Hereinafter, translation is included without limitation in the  
term "modification".) Each licensee is addressed as "you".  
When we speak of free software, we are referring to freedom, not  
price. Our General Public Licenses are designed to make sure that  
you have the freedom to distribute copies of free software (and  
charge for this service if you wish), that you receive source code  
or can get it if you want it, that you can change the software or  
use pieces of it in new free programs; and that you know you can  
do these things.  
Activities other than copying, distribution and modification  
are not covered by this license; they are outside its scope.  
The act of running the Program is not restricted, and the out-  
put from the program is covered only if its contents constitute  
a work based on the program (independent of having been  
made by running the program). Whether that is true depends  
on what the program does.  
To protect your rights, we need to make restrictions that forbid  
anyone to deny you these rights or to ask you to surrender the  
rights. These restrictions translate to certain responsibilities for  
you if you distribute copies of the software, or if you modify it.  
1. You may copy and distribute verbatim copies of the program's  
source code as you receive it, in any medium, provided that  
you conspicuously and appropriately publish on each copy an  
appropriate copyright notice and disclaimer of warranty; keep  
intact all the notices that refer to this license and to the  
absence of any warranty; and give any other recipients of the  
program a copy of this license along with the Program.  
For example, if you distribute copies of such a program, whether  
gratis or for a fee, you must give the recipients all the rights that  
you have. You must make sure that they, too, receive or can get  
the source code. And you must show them these terms so they  
know their rights.  
We protect your rights with two steps: (1) copyright the soft-  
ware, and (2) offer you this license which gives you legal permis-  
sion to copy, distribute and/or modify the software.  
You may charge a fee for the physical act of transferring a  
copy, and you may at your option offer warranty protection in  
exchange for a fee.  
Also, for each author's protection and ours, we want to make cer-  
tain that everyone understands that there is no warranty for this  
free software. If the software is modified by someone else and  
passed on, we want its recipients to know that what they have is  
not the original, so that any problems introduced by others will  
not reflect on the original authors' reputations.  
2. You may modify your copy or copies of the program or any  
portion of it, thus forming a work based on the Program, and  
copy and distribute such modifications or work under the  
terms of section 1 above, provided that you also meet all of  
these conditions:  
Finally, any free program is threatened constantly by software  
patents. We wish to avoid the danger that redistributors of a free  
program will individually obtain patent licenses, in effect making  
a) You must cause the modified files to carry prominent  
notices stating that you changed the files and the date of  
any change.  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
b) You must cause any work that you distribute or publish,  
that in whole or in part contains or is derived from the  
Program or any part there of, to be licensed as a whole at  
no charge to all third parties under the terms of this  
license.  
c) If the modified program normally reads commands interac-  
tively when run, you must cause it, when started running  
for such interactive use in the most ordinary way, to print  
or display an announcement including an appropriate  
copyright notice and a notice that there is no warranty (or  
else, saying that you provide a warranty) and that users  
may redistribute the program under these conditions, and  
telling the user how to view a copy of this license.  
(Exception: if the Program itself is interactive but does not  
normally print such an announcement, your work based on  
the Program is not required to print an announcement.)  
c) Accompany it with the information you received as to the  
offer to distribute corresponding source code. (This alter-  
native is allowed only for noncommercial distribution and  
only if you received the program in object code or exe-  
cutable form with such an offer, in accord with Subsection  
b above.)  
The source code for a work means the preferred form of the  
work for making modifications to it. For an executable work,  
complete source code means all the source code for all mod-  
ules it contains, plus any associated interface definition files,  
plus the scripts used to control compilation and installation  
of the executable. However, as a special exception, the source  
code distributed need not include anything that is normally  
distributed (in either source or binary form) with the major  
components (compiler, kernel, and so on) of the operating  
system on which the executable runs, unless that component  
itself accompanies the executable.  
These requirements apply to the modified work as a whole. If  
identifiable sections of that work are not derived from the  
Program, and can be reasonably considered independent and  
separate works in themselves, then this license, and its terms,  
do not apply to those sections when you distribute them as  
separate works. But when you distribute the same sections as  
part of a whole which is a work based on the Program, the dis-  
tribution of the whole must be on the terms of this license,  
whose permissions for other licensees extend to the entire  
whole, and thus to each and every part regardless of who  
wrote it.  
If distribution of executable or object code is made by offer-  
ing access to copy from a designated place, then offering  
equivalent access to copy the source code from the same  
place counts as distribution of the source code, even though  
third parties are not compelled to copy the source along with  
the object code.  
4. You may not copy, modify, sublicense, or distribute the Program  
except as expressly provided under this license. Any attempt  
otherwise to copy, modify, sublicense or distribute the  
Program is void, and will automatically terminate your rights  
under this license. However, parties who have received copies,  
or rights, from you under this license will not have their licens-  
es terminated so long as such parties remain in full compli-  
ance.  
Thus, it is not the intent of this section to claim rights or con-  
test your rights to work written entirely by you; rather, the  
intent is to exercise the right to control the distribution of  
derivative or collective works based on the program.  
In addition, mere aggregation of another work not based on  
the program with the Program (or with a work based on the  
program) on a volume of a storage or distribution medium  
does not bring the other work under the scope of this license.  
5. You are not required to accept this license, since you have not  
signed it. However, nothing else grants you permission to  
modify or distribute the Program or its derivative works.  
These actions are prohibited by law if you do not accept this  
license. Therefore, by modifying or distributing the program  
(or any work based on the program), you indicate your accep-  
tance of this license to do so, and all its terms and conditions  
for copying, distributing or modifying the program or works  
based on it.  
3. You may copy and distribute the program (or a work based on  
it, under section 2) in object code or executable form under  
the terms of sections 1 and 2 above provided that you also  
do one of the following:  
a) Accompany it with the complete corresponding machine-  
readable source code, which must be distributed under the  
terms of sections 1 and 2 above on a medium customarily  
used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three  
years, to give any third party, for a charge no more than  
your cost of physically performing source distribution, a  
complete machine-readable copy of the corresponding  
source code, to be distributed under the terms of sections  
1 and 2 above on a medium customarily used for software  
interchange; or,  
6. Each time you redistribute the program (or any work based on  
the Program), the recipient automatically receives a license  
from the original licensor to copy, distribute or modify the  
Program subject to these terms and conditions. You may not  
impose any further restrictions on the recipients' exercise of  
the rights granted herein. You are not responsible for enforc-  
ing compliance by third parties to this license.  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
7. If, as a consequence of a court judgment or allegation of  
any later version published by the Free Software Foundation.  
If the program does not specify a version number of this  
license, you may choose any version ever published by the  
Free Software Foundation.  
patent infringement or for any other reason (not limited to  
patent issues), conditions are imposed on you (whether by  
court order, agreement or otherwise) that contradict the con-  
ditions of this license, they do not excuse you from the con-  
ditions of this license. If you cannot distribute so as to satis-  
fy simultaneously your obligations under this license and any  
other pertinent obligations, then as a consequence you may  
not distribute the program at all. For example, if a patent  
license would not permit royalty-free redistribution of the  
program by all those who receive copies directly or indirectly  
through you, then the only way you could satisfy both it and  
this license would be to refrain entirely from distribution of  
the program.  
10.If you wish to incorporate parts of the program into other free  
programs whose distribution conditions are different, write to  
the author to ask for permission. For software which is copy-  
righted by the Free Software Foundation, write to the Free  
Software Foundation; we sometimes make exceptions for this.  
Our decision will be guided by the two goals of preserving the  
free status of all derivatives of our free software and of pro-  
moting the sharing and reuse of software generally.  
NO WARRANTY  
If any portion of this section is held invalid or unenforceable  
under any particular circumstance, the balance of the section  
is intended to apply and the section as a whole is intended to  
apply in other circumstances.  
11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,  
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE  
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN  
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLD-  
ERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS  
IS" WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED  
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE  
RISK AS TO THE QUALITY AND PERFORMANCE OF THE  
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE  
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY  
SERVICING, REPAIR OR CORRECTION.  
It is not the purpose of this section to induce you to infringe  
any patents or other property right claims or to contest valid-  
ity of any such claims; this section has the sole purpose of  
protecting the integrity of the free software distribution sys-  
tem, which is implemented by public license practices. Many  
people have made generous contributions to the wide range  
of software distributed through that system in reliance on  
consistent application of that system; it is up to the  
author/donor to decide if he or she is willing to distribute  
software through any other system and a licensee cannot  
impose that choice.  
12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR  
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,  
OR ANY OTHER PARTY WHO MAY MODIFY AND/OR  
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE  
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES  
ARISING OUT OF THE USE OR INABILITY TO USE THE PRO-  
GRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA  
OR DATA BEING RENDERED INACCURATE OR LOSSES SUS-  
TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE  
PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),  
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
This section is intended to make thoroughly clear what is  
believed to be a consequence of the rest of this license.  
8. If the distribution and/or use of the program is restricted in  
certain countries either by patents or by copyrighted inter-  
faces, the original copyright holder who places the program  
under this license may add an explicit geographical distribution  
limitation excluding those countries, so that distribution is  
permitted only in or among countries not thus excluded. In  
such case, this license incorporates the limitation as if written  
in the body of this license.  
9. The Free Software Foundation may publish revised and/or  
new versions of the General Public License from time to time.  
Such new versions will be similar in spirit to the present ver-  
sion, but may differ in detail to address new problems or con-  
cerns.  
Each version is given a distinguishing version number. If the  
program specifies a version number of this license which  
applies to it and "any later version", you have the option of  
following the terms and conditions either of that version or of  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
END OF TERMS AND CONDITIONS  
Also add information on how to contact you by electronic and  
paper mail.  
How to apply these terms to your new programs  
If the program is interactive, make it output a short notice like  
this when it starts in an interactive mode:  
If you develop a new program, and you want it to be of the great-  
est possible use to the public, the best way to achieve this is to  
make it free software which everyone can redistribute and change  
under these terms.  
Gnomovision version 69, Copyright (C) year name of author  
Gnomovision comes with ABSOLUTELY NO WARRANTY; for  
details type ‘show w’. This is free software, and you are welcome  
to redistribute it under certain conditions; type ‘show c’ for  
details.  
To do so, attach the following notices to the program. It is safest  
to attach them to the start of each source file to most effective-  
ly convey the exclusion of warranty; and each file should have at  
least the "copyright" line and a pointer to where the full notice is  
found.  
The hypothetical commands ‘show w’ and ‘show c’ should show  
the appropriate parts of the General Public License. Of course,  
the commands you use may be called something other than  
‘show w’ and ‘show c’; they could even be mouse-clicks or menu  
items-whatever suits your program.  
one line to give the program's name and a brief idea of what it  
does.  
Copyright (C) <year> <name of author>  
You should also get your employer (if you work as a programmer)  
or your school, if any, to sign a “copyright disclaimer” for the pro-  
gram, if necessary. Here is a sample; alter the names:  
This program is free software; you can redistribute it and/or  
modify it under the terms of the GNU General Public License as  
published by the Free Software Foundation; either version 2 of  
the license, or (at your option) any later version.  
Yoyodyne, Inc., hereby disclaims all copyright interest in the pro-  
gram ‘Gnomovision’ (which makes passes at compilers) written by  
James Hacker.  
This program is distributed in the hope that it will be useful, but  
WITHOUT ANY WARRANTY; without even the implied warranty  
of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-  
POSE. See the GNU General Public License for more details.  
signature of Ty Coon, 1 April 1989  
Ty Coon, President of Vice  
This General Public License does not permit incorporating your  
program into proprietary programs. If your program is a subrou-  
tine library, you may consider it more useful to permit linking pro-  
prietary applications with the library. If this is what you want to  
do, use the GNU Lesser General Public License instead of this  
license.  
You should have received a copy of the GNU General Public  
License along with this program; if not, write to the Free Software  
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  
02110-1301 USA.  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
GNU LESSER GENERAL PUBLIC LICENSE  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51  
To protect each distributor, we want to make it very clear that  
there is no warranty for the free library. Also, if the library is mod-  
ified by someone else and passed on, the recipients should know  
that what they have is not the original version, so that the origi-  
nal author's reputation will not be affected by problems that  
might be introduced by others.  
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of  
this license document, but changing it is not allowed.  
[This is the first released version of the Lesser GPL. It also  
counts as the successor of the GNU Library Public License, ver-  
sion 2, hence the version number 2.1.]  
Finally, software patents pose a constant threat to the existence  
of any free program. We wish to make sure that a company can-  
not effectively restrict the users of a free program by obtaining a  
restrictive license from a patent holder. Therefore, we insist that  
any patent license obtained for a version of the library must be  
consistent with the full freedom of use specified in this license.  
Preamble  
The licenses for most software are designed to take away your  
freedom to share and change it. By contrast, the GNU General  
Public Licenses are intended to guarantee your freedom to share  
and change free software - to make sure the software is free for  
all its users.  
Most GNU software, including some libraries, is covered by the  
ordinary GNU General Public License. This license, the GNU  
Lesser General Public License, applies to certain designated  
libraries, and is quite different from the ordinary General Public  
License. We use this license for certain libraries in order to per-  
mit linking those libraries into non-free programs.  
This license, the Lesser General Public License, applies to some  
specially designated software packages - typically libraries - of  
the Free Software Foundation and other authors who decide to  
use it. You can use it too, but we suggest you first think careful-  
ly about whether this license or the ordinary General Public  
License is the better strategy to use in any particular case, based  
on the explanations below.  
When a program is linked with a library, whether statically or  
using a shared library, the combination of the two is legally  
speaking a combined work, a derivative of the original library. The  
ordinary General Public License therefore permits such linking  
only if the entire combination fits its criteria of freedom. The  
Lesser General Public License permits more lax criteria for linking  
other code with the library.  
When we speak of free software, we are referring to freedom of  
use, not price. Our General Public Licenses are designed to make  
sure that you have the freedom to distribute copies of free soft-  
ware (and charge for this service if you wish); that you receive  
source code or can get it if you want it; that you can change the  
software and use pieces of it in new free programs; and that you  
are informed that you can do these things.  
We call this license the "Lesser" General Public License because  
it does Less to protect the user's freedom than the ordinary  
General Public License. It also provides other free software devel-  
opers Less of an advantage over competing non-free programs.  
These disadvantages are the reason we use the ordinary General  
Public License for many libraries. However, the Lesser license pro-  
vides advantages in certain special circumstances.  
To protect your rights, we need to make restrictions that forbid  
distributors to deny you these rights or to ask you to surrender  
these rights. These restrictions translate to certain responsibilities  
for you if you distribute copies of the library or if you modify it.  
For example, on rare occasions, there may be a special need to  
encourage the widest possible use of a certain library, so that it  
becomes a de-facto standard. To achieve this, non-free programs  
must be allowed to use the library. A more frequent case is that  
a free library does the same job as widely used non-free libraries.  
In this case, there is little to gain by limiting the free library to free  
software only, so we use the Lesser General Public License.  
For example, if you distribute copies of the library, whether gratis  
or for a fee, you must give the recipients all the rights that we  
gave you. You must make sure that they, too, receive or can get  
the source code. If you link other code with the library, you must  
provide complete object files to the recipients, so that they can  
relink them with the library after making changes to the library  
and recompiling it. And you must show them these terms so they  
know their rights.  
In other cases, permission to use a particular library in non-free  
programs enables a greater number of people to use a large body  
of free software. For example, permission to use the GNU C  
Library in non-free programs enables many more people to use  
the whole GNU operating system, as well as its variant, the  
GNU/Linux operating system.  
We protect your rights with a two-step method: (1) we copyright  
the library, and (2) we offer you this license, which gives you legal  
permission to copy, distribute and/or modify the library.  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Although the Lesser General Public License is Less protective of  
the users' freedom, it does ensure that the user of a program that  
is linked with the Library has the freedom and the wherewithal to  
run that program using a modified version of the Library.  
each copy an appropriate copyright notice and disclaimer of  
warranty; keep intact all the notices that refer to this license  
and to the absence of any warranty; and distribute a copy of  
this license along with the Library.  
The precise terms and conditions for copying, distribution and  
modification follow. Pay close attention to the difference between  
a "work based on the library" and a "work that uses the library".  
The former contains code derived from the library, whereas the  
latter must be combined with the library in order to run.  
You may charge a fee for the physical act of transferring a  
copy, and you may at your option offer warranty protection in  
exchange for a fee.  
2. You may modify your copy or copies of the Library or any  
portion of it, thus forming a work based on the Library, and  
copy and distribute such modifications or work under the  
terms of section 1 above, provided that you also meet all of  
these conditions:  
GNU LESSER GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION  
AND MODIFICATION  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent  
notices stating that you changed the files and the date of  
any change.  
c) You must cause the whole of the work to be licensed at no  
charge to all third parties under the terms of this license.  
d) If a facility in the modified Library refers to a function or a  
table of data to be supplied by an application program that  
uses the facility, other than as an argument passed when  
the facility is invoked, then you must make a good faith  
effort to ensure that, in the event an application does not  
supply such function or table, the facility still operates, and  
performs whatever part of its purpose remains meaningful.  
0. This license agreement applies to any software library or other  
program which contains a notice placed by the copyright hold-  
er or other authorized party saying it may be distributed  
under the terms of this Lesser General Public License (also  
called “this license”). Each license is addressed as "you".  
A “library” means a collection of software functions and/or  
data prepared so as to be conveniently linked with application  
programs (which use some of those functions and data) to  
form executables.  
The “Library”, below, refers to any such software library or work  
which has been distributed under these terms. A “work based  
on the Library” means either the Library or any derivative work  
under copyright law: that is to say, a work containing the  
library or a portion of it, either verbatim or with modifications  
and/or translated straightforwardly into another language.  
(Hereinafter, translation is included without limitation in the  
term “modification”.)  
(For example, a function in a library to compute square roots  
has a purpose that is entirely well-defined independent of the  
application. Therefore, Subsection 2d requires that any appli-  
cation-supplied function or table used by this function must be  
optional: if the application does not supply it, the square root  
function must still compute square roots.)  
These requirements apply to the modified work as a whole. If  
identifiable sections of that work are not derived from the  
library, and can be reasonably considered independent and  
separate works in themselves, then this license, and its terms,  
do not apply to those sections when you distribute them as  
separate works. But when you distribute the same sections as  
part of a whole which is a work based on the library, the dis-  
tribution of the whole must be on the terms of this license,  
whose permissions for other licenses extend to the entire  
whole, and thus to each and every part regardless of who  
wrote it.  
“Source code” for a work means the preferred form of the  
work for making modifications to it. For a library, complete  
source code means all the source code for all modules it con-  
tains, plus any associated interface definition files, plus the  
scripts used to control compilation and installation of the  
library.  
Activities other than copying, distribution and modification  
are not covered by this license; they are outside its scope.  
The act of running a program using the Library is not restrict-  
ed, and output from such a program is covered only if its con-  
tents constitute a work based on the library (independent of  
the use of the Library in a tool for writing it). Whether that is  
true depends on what the library does and what the program  
that uses the library does.  
Thus, it is not the intent of this section to claim rights or con-  
test your rights to work written entirely by you; rather, the  
intent is to exercise the right to control the distribution of  
derivative or collective works based on the library.  
In addition, mere aggregation of another work not based on  
the library with the library (or with a work based on the  
library) on a volume of a storage or distribution medium does  
not bring the other work under the scope of this license.  
1. You may copy and distribute verbatim copies of the library's  
complete source code as you receive it, in any medium, pro-  
vided that you conspicuously and appropriately publish on  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
3. You may opt to apply the terms of the ordinary GNU General  
the object file is unrestricted, regardless of whether it is legal-  
ly a derivative work. (Executable containing this object code  
plus portions of the library will still fall under Section 6.)  
Public License instead of this License to a given copy of the  
Library. To do this, you must alter all the notices that refer to  
this License, so that they refer to the ordinary GNU General  
Public License, version 2, instead of to this License. (If a newer  
version than version 2 of the ordinary GNU General Public  
License has appeared, then you can specify that version  
instead if you wish.) Do not make any other change in these  
notices.  
Otherwise, if the work is a derivative of the library, you may  
distribute the object code for the work under the terms of  
Section 6. Any executable containing that work also fall under  
Section 6, whether or not they are linked directly with the  
library itself.  
Once this change is made in a given copy, it is irreversible for  
that copy, so the ordinary GNU General Public License applies  
to all subsequent copies and derivative works made from that  
copy.  
This option is useful when you wish to copy part of the code  
of the library into a program that is not a library.  
6. As an exception to the sections above, you may also combine  
or link a "work that uses the library" with the library to pro-  
duce a work containing portions of the library, and distribute  
that work under terms of your choice, provided that the terms  
permit modification of the work for the customer's own use  
and reverse engineering for debugging such modifications.  
4. You may copy and distribute the library (or a portion or deriv-  
ative of it, under Section 2) in object code or executable form  
under the terms of Sections 1 and 2 above provided that you  
accompany it with the complete corresponding machine-  
readable source code, which must be distributed under the  
terms of sections 1 and 2 above on a medium customarily  
used for software interchange.  
You must give prominent notice with each copy of the work  
that the library is used in it and that the Library and its use  
are covered by this license. You must supply a copy of this  
license. If the work during execution displays copyright  
notices, you must include the copyright notice for the library  
among them, as well as a reference directing the user to the  
copy of this license. Also, you must do one of these things:  
If distribution of object code is made by offering access to  
copy from a designated place, then offering equivalent access  
to copy the source code from the same place satisfies the  
requirement to distribute the source code, even though third  
parties are not compelled to copy the source along with the  
object code.  
a) Accompany the work with the complete corresponding  
machine-readable source code for the library including  
whatever changes were used in the work (which must be  
distributed under Sections 1 and 2 above); and, if the work  
is an executable linked with the Library, with the complete  
machine-readable “work that uses the Library”, as object  
code and/or source code, so that the user can modify the  
library and then relink to produce a modified executable  
containing the modified library. (It is understood that the  
user who changes the contents of definitions files in the  
library will not necessarily be able to recompile the appli-  
cation to use the modified definitions.)  
5. A program that contains no derivative of any portion of the  
Library, but is designed to work with the Library by being  
compiled or linked with it, is called a “work that uses the  
Library”. Such a work, in isolation, is not a derivative work of  
the Library, and therefore falls outside the scope of this  
license.  
However, linking a “work that uses the library” with the Library  
creates an executable that is a derivative of the Library  
(because it contains portions of the library), rather than a  
“work that uses the library”. The executable is therefore cov-  
ered by this license. Section 6 states terms for distribution of  
such executable.  
b) Use a suitable shared library mechanism for linking with the  
library. A suitable mechanism is one that (1) uses at run time  
a copy of the library already present on the user’s computer  
system, rather than copying library functions into the exe-  
cutable, and (2) will operate properly with a modified version  
of the library, if the user installs one, as long as the modified  
version is interface-compatible with the version that the  
work was made with.  
c) Accompany the work with a written offer, valid for at least  
three years, to give the same user the materials specified in  
Subsection 6, above, for a charge no more than the cost of  
performing this distribution.  
d) If distribution of the work is made by offering access to  
copy from a designated place, offer equivalent access to  
copy the above specified materials from the same place.  
e) Verify that the user has already received a copy of these  
materials or that you have already sent this user a copy.  
When a “work that uses the library” uses material from a head-  
er file that is part of the library, the object code for the work  
may be a derivative work of the library even though the source  
code is not.  
Whether this is true is especially significant if the work can be  
linked without the library, or if the work is itself a library. The  
threshold for this to be true is not precisely defined by law.  
If such an object file uses only numerical parameters, data  
structure layouts and accessories, and small macros and small  
inline functions (ten lines or less in length), then the use of  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For an executable, the required form of the "work that uses  
the library" must include any data and utility programs need-  
ed for reproducing the executable from it. However, as a spe-  
cial exception, the materials to be distributed need not  
include anything that is normally distributed (in either source  
or binary form) with the major components (compiler, kernel,  
and so on) of the operating system on which the executable  
runs, unless that component itself accompanies the exe-  
cutable.  
of the rights granted herein.  
You are not responsible for enforcing compliance by third  
parties with this license.  
11.If, as a consequence of a court judgment or allegation of  
patent infringement or for any other reason (not limited to  
patent issues), conditions are imposed on you (whether by  
court order, agreement or otherwise) that contradict the con-  
ditions of this license, they do not excuse you from the con-  
ditions of this license. If you cannot distribute so as to satis-  
fy simultaneously your obligations under this license and any  
other pertinent obligations, then as a consequence you may  
not distribute the library at all. For example, if a patent license  
would not permit royalty-free redistribution of the library by  
all those who receive copies directly or indirectly through  
you, then the only way you could satisfy both it and this  
license would be to refrain entirely from distribution of the  
library.  
It may happen that this requirement contradicts the license  
restrictions of other proprietary libraries that do not normal-  
ly accompany the operating system. Such a contradiction  
means you cannot use both them and the library together in  
an executable that you distribute.  
7. You may place library facilities that are a work based on the  
library side-by-side in a single library together with other  
library facilities not covered by this license, and distribute  
such a combined library, provided that the separate distribu-  
tion of the work based on the Library and of the other library  
facilities is otherwise permitted, and provided that you do  
these two things:  
If any portion of this section is held invalid or unenforceable  
under any particular circumstance, the balance of the section  
is intended to apply, and the section as a whole is intended to  
apply in other circumstances.  
It is not the purpose of this section to induce you to infringe  
any patents or other property right claims or to contest valid-  
ity of any such claims; this section has the sole purpose of  
protecting the integrity of the free software distribution sys-  
tem which is implemented by public license practices. Many  
people have made generous contributions to the wide range  
of software distributed through that system in reliance on  
consistent application of that system; it is up to the  
author/donor to decide if he or she is willing to distribute  
software through any other system and a license cannot  
impose that choice.  
a) Accompany the combined library with a copy of the same  
work based on the Library, uncombined with any other  
library facilities. This must be distributed under the terms  
of the sections above.  
b) Give prominent notice with the combined library of the  
fact that part of it is a work based on the library, and  
explaining where to find the accompanying uncombined  
form of the same work.  
8. You may not copy, modify, sublicense, link with, or distribute  
the library except as expressly provided under this license.  
Any attempt otherwise to copy, modify, sublicense, link with,  
or distribute the library is void, and will automatically termi-  
nate your rights under this license. However, parties who have  
received copies, or rights, from you under this license will not  
have their licenses terminated so long as such parties remain  
in full compliance.  
This section is intended to make thoroughly clear what is  
believed to be a consequence of the rest of this license.  
12.If the distribution and/or use of the library is restricted in cer-  
tain countries either by patents or by copyrighted interfaces,  
the original copyright holder who places the library under this  
license may add an explicit geographical distribution limitation  
excluding those countries, so that distribution is permitted  
only in or among countries not thus excluded. In such case,  
this license incorporates the limitation as if written in the body  
of this license.  
9. You are not required to accept this license, since you have not  
signed it. However, nothing else grants you permission to mod-  
ify or distribute the library or its derivative works. These  
actions are prohibited by law if you do not accept this license.  
Therefore, by modifying or distributing the library (or any work  
based on the library), you indicate your acceptance of this  
license to do so, and all its terms and conditions for copying,  
distributing or modifying the library or works based on it.  
13.The Free Software Foundation may publish revised and/or  
new versions of the Lesser General Public License from time to  
time. Such new versions will be similar in spirit to the present  
version, but may differ in detail to address new problems or  
concerns.  
Each version is given a distinguishing version number. If the  
library specifies a version number of this license which applies  
to it and “any later version”, you have the option of following  
the terms and conditions either of that version or of any later  
version published by the Free Software Foundation.  
10.Each time you redistribute the library (or any work based on  
the Library), the recipient automatically receives a license  
from the original licensor to copy, distribute, link with or mod-  
ify the library subject to these terms and conditions. You may  
not impose any further restrictions on the recipients' exercise  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
If the library does not specify a license version number, you  
may choose any version ever published by the Free Software  
Foundation.  
To apply these terms, attach the following notices to the library.  
It is safest to attach them to the start of each source file to most  
effectively convey the exclusion of warranty; and each file should  
have at least the “copyright” line and a pointer to where the full  
notice is found.  
14.If you wish to incorporate parts of the library into other free  
programs whose distribution conditions are incompatible with  
these, write to the author to ask for permission. For software  
which is copyrighted by the Free Software Foundation, write  
to the Free Software Foundation; we sometimes make excep-  
tions for this. Our decision will be guided by the two goals of  
preserving the free status of all derivatives of our free software  
and of promoting the sharing and reuse of software generally.  
one line to give the library's name and a brief idea of what it does.  
Copyright (C) <year> <name of author>  
This library is free software; you can redistribute it and/or modify  
it under the terms of the GNU Lesser General Public License as  
published by the Free Software Foundation; either version 2.1 of  
the license, or (at your option) any later version.  
NO WARRANTY  
This library is distributed in the hope that it will be useful, but  
WITHOUT ANY WARRANTY; without even the implied warranty  
of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-  
POSE. See the GNU Lesser General Public License for more  
details.  
15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE,  
THERE IS NO WARRANTY FOR THE LIBRARY, TO THE  
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN  
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLD-  
ERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS  
IS" WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED  
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE  
RISK AS TO THE QUALITY AND PERFORMANCE OF THE  
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE  
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY  
SERVICING, REPAIR OR CORRECTION.  
You should have received a copy of the GNU Lesser General  
Public License along with this library; if not, write to the Free  
Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,  
MA 02110-1301 USA  
Also add information on how to contact you by electronic and  
paper mail.  
You should also get your employer (if you work as a programmer)  
or your school, if any, to sign a “copyright disclaimer” for the  
library, if necessary. Here is a sample; alter the names:  
16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR  
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,  
OR ANY OTHER PARTY WHO MAY MODIFY AND/OR  
REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE  
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES  
ARISING OUT OF THE USE OR INABILITY TO USE THE  
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA  
OR DATA BEING RENDERED INACCURATE OR LOSSES SUS-  
TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE  
LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE),  
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
Yoyodyne, Inc., hereby disclaims all copyright interest in the  
library ‘Frob’ (a library for tweaking knobs) written by James  
Random Hacker.  
signature of Ty Coon, 1 April 1990  
Ty Coon, President of Vice  
END OF TERMS AND CONDITIONS  
How to apply these terms to your new libraries  
If you develop a new library, and you want it to be of the great-  
est possible use to the public, we recommend making it free soft-  
ware that everyone can redistribute and change. You can do so  
by permitting redistribution under these terms (or, alternatively,  
under the terms of the ordinary General Public License).  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MOZILLA PUBLIC LICENSE  
Version 1.1  
---------------  
1.Definitions.  
code which is described in the source code notice  
required by exhibit as original code, and which, at the time  
of its release under this license is not already covered  
code governed by this license.  
1.0.1. “Commercial use” means distribution or otherwise making  
the covered code available to a third party.  
1.1. “Contributor” means each entity that creates or con-  
tributes to the creation of modifications.  
1.10.1.“Patent claims” means any patent claim(s), now owned or  
hereafter acquired, including without limitation, method,  
process, and apparatus claims, in any patent licensable by  
grantor.  
1.2. “Contributor version” means the combination of the orig-  
inal code, prior modifications used by a contributor, and  
the modifications made by that particular contributor.  
1.11. “Source code” means the preferred form of the covered  
code for making modifications to it, including all modules  
it contains, plus any associated interface definition files,  
scripts used to control compilation and installation of an  
executable, or source code differential comparisons  
against either the original code or another well known,  
available covered code of the contributor's choice. The  
source code can be in a compressed or archival form, pro-  
vided the appropriate decompression or de-archiving soft-  
ware is widely available for no charge.  
1.3. “Covered code” means the original code or modifications  
or the combination of the original code and modifications,  
in each case including portions thereof.  
1.4. “Electronic distribution mechanism” means a mechanism  
generally accepted in the software development communi-  
ty for the electronic transfer of data.  
1.5. “Executable” means covered code in any form other than  
source code.  
1.12. “You” (or “Your”) means an individual or a legal entity  
exercising rights under, and complying with all of the terms  
of, this license or a future version of this license issued  
under section 6.1.  
1.6. “Initial developer” means the individual or entity identified  
as the initial Developer in the Source Code notice required  
by exhibit A.  
For legal entities, “You” includes any entity which controls,  
is controlled by, or is under common control with You. For  
purposes of this definition, “control” means (a) the power,  
direct or indirect, to cause the direction or management of  
such entity, whether by contract or otherwise, or (b) own-  
ership of more than fifty percent (50%) of the outstand-  
ing shares or beneficial ownership of such entity.  
1.7. “Larger work” means a work which combines covered code  
or portions thereof with code not governed by the terms  
of this License.  
1.8. “License” means this document.  
1.8.1. “Licensable” means having the right to grant, to the maxi-  
mum extent possible, whether at the time of the initial  
grant or subsequently acquired, any and all of the rights  
conveyed herein.  
2. Source Code License.  
2.1. The initial developer grant.  
The initial developer hereby grants You a world-wide, roy-  
alty-free, non-exclusive license, subject to third party intel-  
lectual property claims:  
1.9. “Modifications” means any addition to or deletion from  
the substance or structure of either the original code or  
any previous modifications. When covered code is  
released as a series of files, a modification is:  
a) under intellectual property rights (other than patent or  
trademark) licensable by initial developer to use, repro-  
duce, modify, display, perform, sublicense and distrib-  
ute the original code (or portions thereof) with or with-  
out modifications, and/or as part of a larger work; and  
(b) under patents claims infringed by the making, using or  
selling of original code, to make, have made, use, prac-  
tice, sell, and offer for sale, and/or otherwise dispose  
of the original code (or portions there of).  
A. Any addition to or deletion from the contents of a file  
containing original code or previous modifications.  
B. Any new file that contains any part of the original code  
or previous modifications.  
1.10. “Original code” means source code of computer software  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
(c) the licenses granted in this section 2.1(a) and (b) are  
effective on the date Initial developer first distributes  
original code under the terms of this license.  
(d) Notwithstanding section 2.1(b) above, no patent  
license is granted: 1) for code that You delete from the  
original Code; 2) separate from the original code; or  
3) for infringements caused by: i) the modification of  
the original code or ii) the combination of the original  
code with other software or devices.  
You may not offer or impose any terms on any source code  
version that alters or restricts the applicable version of  
this license or the recipients' rights hereunder. However,  
you may include an additional document offering the  
additional rights described in section 3.5.  
3.2. Availability of source code.  
Any modification which you create or to which you con-  
tribute must be made available in source code form under  
the terms of this license either on the same media as an  
executable version or via an accepted electronic distribu-  
tion mechanism to anyone to whom you made an exe-  
cutable version available; and if made available via elec-  
tronic distribution mechanism, must remain available for at  
least twelve (12) months after the date it initially became  
available, or at least six (6) months after a subsequent  
version of that particular modification has been made  
available to such recipients. You are responsible for ensur-  
ing that the source code version remains available even if  
the electronic distribution mechanism is maintained by a  
third party.  
2.2. Contributor Grant.  
Subject to third party intellectual property claims, each  
contributor hereby grants You a world-wide, royalty-free,  
non-exclusive license  
(a) under intellectual property rights (other than patent  
or trademark) licensable by contributor, to use,  
reproduce, modify, display, perform, sublicense and  
distribute the modifications created by such contribu-  
tor (or portions thereof) either on an unmodified  
basis, with other modifications, as covered code  
and/or as part of a larger work; and  
(b) under patent claims infringed by the making, using, or  
selling of modifications made by that contributor  
either alone and/or in combination with its contributor  
version (or portions of such combination), to make,  
use, sell, offer for sale, have made, and/or otherwise  
dispose of: 1) modifications made by that contributor  
(or portions thereof); and 2) the combination of mod-  
ifications made by that contributor with its contributor  
version (or portions of such combination).  
3.3. Description of modifications.  
You must cause all covered code to which you contribute to  
contain a file documenting the changes You made to create  
that covered code and the date of any change. You must  
include a prominent statement that the modification is  
derived, directly or indirectly, from original code provided by  
the initial developer and including the name of the initial  
developer in (a) the source code, and (b) in any notice in an  
executable version or related documentation in which you  
describe the origin or ownership of the covered code.  
(c) the licenses granted in sections 2.2(a) and 2.2(b) are  
effective on the date contributor first makes commer-  
cial use of the covered code.  
3.4. Intellectual property matters  
(a) Third party claims.  
(d) Notwithstanding section 2.2(b) above, no patent  
license is granted: 1) for any code that contributor has  
deleted from the contributor version; 2) separate from  
the contributor version; 3) for infringements caused  
by: i) third party modifications of contributor version  
or ii) the combination of modifications made by that  
contributor with other software (except as part of the  
contributor version) or other devices; or 4) under  
patent claims infringed by covered code in the  
absence of modifications made by that contributor.  
If contributor has knowledge that a license under a third  
party's intellectual property rights is required to exercise  
the rights granted by such contributor under sections 2.1  
or 2.2, contributor must include a text file with the source  
code distribution titled "LEGAL" which describes the claim  
and the party making the claim in sufficient detail that a  
recipient will know whom to contact. If contributor obtains  
such knowledge after the modification is made available as  
described in section 3.2, contributor shall promptly modi-  
fy the LEGAL file in all copies contributor makes available  
thereafter and shall take other steps (such as notifying  
appropriate mailing lists or newsgroups) reasonably calcu-  
lated to inform those who received the covered code that  
new knowledge has been obtained.  
3. Distribution Obligations.  
3.1. Application of license.  
The modifications which You create or to which you con-  
tribute are governed by the terms of this license, including  
without limitation section 2.2. The source code version of  
covered code may be distributed only under the terms of  
this license or a future version of this license released  
under section 6.1, and you must include a copy of this  
license with every copy of the source code you distribute.  
(b) Contributor APIs.  
If contributor's modifications include an application  
programming interface and contributor has knowledge of  
patent licenses which are reasonably necessary to implement  
that API, contributor must also include this information in  
the LEGAL file.  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(c) Representations.  
3.7. Larger works.  
You may create a larger work by combining covered code  
contributor represents that, except as disclosed pursuant  
to section 3.4(a) above, contributor believes that contributor's  
modifications are contributor's original creation(s)  
and/or contributor has sufficient rights to grant the rights  
conveyed by this license.  
with other code not governed by the terms of this license  
and distribute the larger work as a single product. In such  
a case, you must make sure the requirements of this  
license are fulfilled for the covered code.  
3.5. Required notices.  
4. Inability to comply due to statute or regulation.  
You must duplicate the notice in exhibit A in each file of  
the source code. If it is not possible to put such notice in  
a particular source code file due to its structure, then You  
must include such notice in a location (such as a relevant  
directory) where a user would be likely to look for such a  
notice. If You created one or more modification(s), you  
may add your name as a contributor to the notice  
described in exhibit A. you must also duplicate this license  
in any documentation for the source code where You  
describe recipients' rights or ownership rights relating to  
covered code. You may choose to offer, and to charge a  
fee for, warranty, support, indemnity or liability obligations  
to one or more recipients of covered code. However, you  
may do so only on your own behalf, and not on behalf of  
the Initial developer or any contributor. You must make it  
absolutely clear than any such warranty, support, indemni-  
ty or liability obligation is offered by you alone, and You  
hereby agree to indemnify the Initial developer and every  
contributor for any liability incurred by the Initial develop-  
er or such contributor as a result of warranty, support,  
indemnity or liability terms you offer.  
If it is impossible for you to comply with any of the terms  
of this license with respect to some or all of the covered  
code due to statute, judicial order, or regulation then you  
must: (a) comply with the terms of this license to the max-  
imum extent possible; and (b) describe the limitations and  
the code they affect. Such description must be included in  
the LEGAL file described in section 3.4 and must be  
included with all distributions of the source code. Except  
to the extent prohibited by statute or regulation, such  
description must be sufficiently detailed for a recipient of  
ordinary skill to be able to understand it.  
5. Application of this license.  
This license applies to code to which the initial developer has  
attached the notice in exhibit A and to related covered code.  
6. Versions of the license.  
6.1. New versions.  
Netscape communications corporation (“Netscape”) may  
publish revised and/or new versions of the license from  
time to time. Each version will be given a distinguishing  
version number.  
3.6. Distribution of executable versions.  
You may distribute covered code in executable form only if  
the requirements of section 3.1-3.5 have been met for  
that covered code, and if you include a notice stating that  
the source code version of the covered code is available  
under the terms of this license, including a description of  
how and where you have fulfilled the obligations of section  
3.2. The notice must be conspicuously included in any  
notice in an executable version, related documentation or  
collateral in which you describe recipients' rights relating  
to the covered code. You may distribute the executable  
version of covered code or ownership rights under a  
license of your choice, which may contain terms different  
from this license, provided that you are in compliance with  
the terms of this license and that the license for the exe-  
cutable version does not attempt to limit or alter the recip-  
ient's rights in the source code version from the rights set  
forth in this license. If you distribute the executable ver-  
sion under a different license you must make it absolutely  
clear that any terms which differ from this license are  
offered by you alone, not by the Initial developer or any  
contributor. You hereby agree to indemnify the initial  
developer and every contributor for any liability incurred  
by the initial developer or such contributor as a result of  
any such terms You offer.  
6.2. Effect of new versions.  
Once covered code has been published under a particular  
version of the license, you may always continue to use it  
under the terms of that version. You may also choose to  
use such covered code under the terms of any subsequent  
version of the license published by netscape. No one  
other than netscape has the right to modify the terms  
applicable to covered code created under this license.  
6.3. Derivative works.  
If You create or use a modified version of this license  
(which you may only do in order to apply it to code which  
is not already covered code governed by this license), You  
must (a) rename Your license so that the phrases  
"Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL",  
"NPL" or any confusingly similar phrase do not appear in  
your license (except to note that your license differs from  
this license) and (b) otherwise make it clear that Your  
version of the license contains terms which differ from the  
Mozilla Public license and netscape Public License. (Filling  
in the name of the initial developer, original code or con-  
tributor in the notice described in exhibit A shall not of  
themselves be deemed to be modifications of this license.)  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
7. DISCLAIMER OF WARRANTY.  
such participant under sections 2.1(b) and 2.2(b) are  
revoked effective as of the date you first made, used,  
sold, distributed, or had made, modifications made by  
that participant.  
COVERED CODE IS PROVIDED UNDER THIS LICENSE  
ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY  
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,  
WITHOUT LIMITATION, WARRANTIES THAT THE COV-  
ERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT  
FOR A PARTICULAR PURPOSE OR NON-INFRINGING.  
THE ENTIRE RISK AS TO THE QUALITY AND PERFOR-  
MANCE OF THE COVERED CODE IS WITH YOU.  
SHOULD ANY COVERED CODE PROVE DEFECTIVE IN  
ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR  
ANY OTHER CONTRIBUTOR) ASSUME THE COST OF  
ANY NECESSARY SERVICING, REPAIR OR CORRECTION.  
THIS DISCLAIMER OF WARRANTY CONSTITUTES AN  
ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY  
COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT  
UNDER THIS DISCLAIMER.  
8.3. If you assert a patent infringement claim against partici-  
pant alleging that such participant's contributor version  
directly or indirectly infringes any patent where such claim  
is resolved (such as by license or settlement) prior to the  
initiation of patent infringement litigation, then the rea-  
sonable value of the licenses granted by such participant  
under sections 2.1 or 2.2 shall be taken into account in  
determining the amount or value of any payment or  
license.  
8.4. In the event of termination under sections 8.1 or 8.2  
above, all end user license agreements (excluding distributors  
and resellers) which have been validly granted by you or  
any distributor hereunder prior to termination shall survive  
termination.  
8. TERMINATION.  
8.1. This license and the rights granted hereunder will terminate  
automatically if you fail to comply with terms herein and  
fail to cure such breach within 30 days of becoming aware  
of the breach. All sublicenses to the covered code which  
are properly granted shall survive any termination of this  
license. Provisions which, by their nature, must remain in  
effect beyond the termination of this license shall survive.  
9. LIMITATION OF LIABILITY.  
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL  
THEORY, WHETHER TORT (INCLUDING NEGLIGENCE),  
CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL  
DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DIS-  
TRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF  
ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR  
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUEN-  
TIAL DAMAGES OF ANY CHARACTER INCLUDING, WITH-  
OUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL,  
WORK STOPPAGE, COMPUTER FAILURE OR MALFUNC-  
TION, OR ANY AND ALL OTHER COMMERCIAL DAM-  
AGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE  
BEEN INFORMED OF THE POSSIBILITY OF SUCH DAM-  
AGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY  
TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULT-  
ING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT  
APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME  
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR  
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAM-  
AGES, SO THIS EXCLUSION AND LIMITATION MAY NOT  
APPLY TO YOU.  
8.2. If you initiate litigation by asserting a patent infringement  
claim (excluding declatory judgment actions) against ini-  
tial developer or a contributor (the initial developer or  
contributor against whom you file such action is referred  
to as “Participant”) alleging that:  
(a) such participant's contributor version directly or indi-  
rectly infringes any patent, then any and all rights  
granted by such participant to you under sections 2.1  
and/or 2.2 of this license shall, upon 60 days notice  
from Participant terminate prospectively, unless if within  
60 days after receipt of notice you either: (i) agree in  
writing to pay participant a mutually agreeable reasonable  
royalty for your past and future use of modifications  
made by such participant, or (ii) withdraw your litigation  
claim with respect to the contributor version against  
such participant. If within 60 days of notice, a reasonable  
royalty and payment arrangement are not mutually  
agreed upon in writing by the parties or the litigation  
claim is not withdrawn, the rights granted by partici-  
pant to you under sections 2.1 and/or 2.2 automati-  
cally terminate at the expiration of the 60 day notice  
period specified above.  
10. U.S. GOVERNMENT END USERS.  
The covered code is a "commercial item," as that term is  
defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of  
"commercial computer software" and "commercial computer  
software documentation," as such terms are used in 48  
C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R.  
12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4  
(June 1995), all U.S. Government end users acquire cov-  
ered code with only those rights set forth herein.  
(b) any software, hardware, or device, other than such par-  
ticipant's contributor Version, directly or indirectly  
infringes any patent, then any rights granted to You by  
112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. MISCELLANEOUS.  
This license represents the complete agreement concerning  
EXHIBIT A -Mozilla Public License.  
subject matter hereof. If any provision of this license is  
held to be unenforceable, such provision shall be reformed  
only to the extent necessary to make it enforceable. This  
License shall be governed by California law provisions  
(except to the extent applicable law, if any, provides oth-  
erwise), excluding its conflict-of-law provisions. With  
respect to disputes in which at least one party is a citizen  
of, or an entity chartered or registered to do business in  
the united states of america, any litigation relating to this  
License shall be subject to the jurisdiction of the federal  
courts of the northern district of california, with venue  
lying in santa clara county, california, with the losing party  
responsible for costs, including without limitation, court  
costs and reasonable attorneys' fees and expenses. The  
application of the united nations convention on contracts  
for the International sale of goods is expressly excluded.  
Any law or regulation which provides that the language of  
a contract shall be construed against the drafter shall not  
apply to this license.  
The contents of this file are subject to the Mozilla Public License  
Version 1.1 (the “license”); you may not use this file except in  
compliance with the License. You may obtain a copy of the  
license at http://www.mozilla.org/MPL/  
Software distributed under the license is distributed on an "AS  
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express  
or implied. See the license for the specific language governing  
rights and limitations under the License.  
The Original Code is ______________________________________.  
The  
Initial  
is___________________.  
Developer  
of  
the  
Original  
Code  
Portions created by ______________________ are Copyright (C)  
_______________________. All Rights Reserved.  
Contributor(s): ______________________________________.  
12. RESPONSIBILITY FOR CLAIMS.  
Alternatively, the contents of this file may be used under the  
terms of the _____ license (the "[___] License"), in which case  
the provisions of [______] license are applicable instead of those  
above. If you wish to allow use of your version of this file only  
under the terms of the [____] license and not to allow others to  
use your version of this file under the MPL, indicate your decision  
by deleting the provisions above and replace them with the  
notice and other provisions required by the [___] license. If you  
do not delete the provisions above, a recipient may use your version  
of this file under either the MPL or the [___] license."  
As between initial developer and the contributors, each  
party is responsible for claims and damages arising, directly  
or indirectly, out of its utilization of rights under this  
license and you agree to work with initial developer and  
contributors to distribute such responsibility on an equitable  
basis. Nothing herein is intended or shall be deemed to  
constitute any admission of liability.  
13. MULTIPLE-LICENSED CODE.  
Initial developer may designate portions of the covered  
code as "Multiple-Licensed". "Multiple-Licensed" means  
that the initial developer permits you to utilize portions of  
the covered code under your choice of the NPL or the  
alternative licenses, if any, specified by the initial developer  
in the file described in exhibit A.  
NOTE: The text of this exhibit A may differ slightly from the text  
of the notices in the source code files of the original code. You  
should use the text of this exhibit A rather than the text found in  
the original code/source code for Your modifications.  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Liebherr Refrigerator HC 2062 User Manual
Lightolier Indoor Furnishings 1102TH1R User Manual
Lightolier Indoor Furnishings WLRN244120SB User Manual
Link electronic Network Router 860 XL161C User Manual
Lowrance electronic GPS Receiver 4900M User Manual
LST Smoke Alarm GD 55000 122 User Manual
Mackie Stereo Amplifier 400F User Manual
Maytag Microwave Oven Combination Oven User Manual
Mazda Automobile 2005 6 SPORTS SEDAN User Manual
Mellerware Blender 62000 User Manual