LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 1
Color Video Camera
Instruction Manual
Models : LVC-SX703PC/OC/MC
LVC-SX703PB/OB/MB
Before installing, operating or adjusting this
product, please read this instruction booklet
carefully and completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 3
Important Safety Instructions
1. Read these instructions. - All these safety and
operating instructions should be read before the
product is operated.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s instruc-
tions. - Slots and openings in the cabinet are
provided for ventilation, to ensure reliable oper-
ation of the product, and to protect it from
over- heating. The openings should never be
blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should
not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is
provided and the manufacturer’s instructions
have been adhered to.
2. Keep these instructions. - The safety, operat-
ing and use instructions should be retained for
future reference.
3. Heed all warnings. - All warnings on the prod-
uct and in the operating instructions should be
adhered to.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this apparatus near water. – For
example: near a bath tub, wash bowl, kitchen
sink, laundry tub, in a wet basement; near a
swimming pool; etc.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
6. Clean only with dry cloth. – Unplug this prod-
uct from the wall outlet before cleaning. Do not
use liquid cleaners.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 4
Important Safety Instructions
9. Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safe-
ty. If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
12. Use only the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold
with apparatus. When a cart is used, use
caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service per-
sonnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-
10. Protect the power cord from being walked
on or pinched particularly at plugs, conven-
ience receptacles, and the point where they
exit from the apparatus.
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed
to rain or moisture, does not operate nor-
mally, or has been dropped.
11. Only use attachments/
accessories specified by
the manufacturer.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 5
Contents and Features
Contents
Privacy Masking Setting . . . . . . . . . . . . . . . .31
Special Menu Settings . . . . . . . . . . . . . . .32-37
RS-485 Protocol . . . . . . . . . . . . . . . . . . . . .38
Specifications . . . . . . . . . . . . . . . . . . . . .39-40
Important Safety Instructions . . . . . . . . . . . .3-4
Contents and Features . . . . . . . . . . . . . . . . . .5
Features Chart . . . . . . . . . . . . . . . . . . . . . . .6
Cautions for Safe Operation . . . . . . . . . . . . . . .7
Part Names and Functions . . . . . . . . . . . . . .8-10
Connections . . . . . . . . . . . . . . . . . . . . . . . .11
Mounting the Lens . . . . . . . . . . . . . . . . . . . .12
Concerning Auto-Iris Lenses . . . . . . . . . . . . . .13
External Device Connections . . . . . . . . . . . . . .14
Flange-back Adjustment . . . . . . . . . . . . . . . .15
Installation of Camera . . . . . . . . . . . . . . . . .16
Menu Operation . . . . . . . . . . . . . . . . . . . .17-18
Language and Camera Identification Settings . . .19
Exposure Settings . . . . . . . . . . . . . . . . . .20-24
White Balance Settings . . . . . . . . . . . . . . .25-27
Day/Night Setting . . . . . . . . . . . . . . . . . . . .28
Motion Detector Setting (MOTION DET) . . . .29-30
Features
This color video camera is designed for use in mon-
itoring system.
• High resolution and high sensitivity with a 1/ 3
inch Super HAD CCD (Charge Coupled Device)
• Line Lock when using AC 24V and AC 230V
power.
• C/CS Mount
5
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 6
Features Chart
This page shows the differences between the models.
Models
DAY/NIGHT
WDR
Yes
No
No
Yes
No
DSS
Yes
Yes
No
Yes
Yes
No
Power Source
AC24V (50Hz) / DC12V
AC24V (50Hz) / DC12V
AC24V(50Hz) / DC12V
AC230V (50Hz)
LVC-SX703PC
LVC-SX703OC
LVC-SX703MC
LVC-SX703PB
LVC-SX703OB
LVC-SX703MB
Yes
Yes
Yes
Yes
Yes
Yes
AC230V (50Hz)
AC230V (50Hz)
No
Models LVC-SX703PC/LVC-SX703PB are used for the description, operation, and details pro-
vided in this operating guide.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 7
Cautions for Safe Operation
• Extremely hot or cold places (operating tempera-
Power Supply
ture -10 °C - 50 °C, however, we recommend
that the unit be used within a temperature range
of 0 °C - 45 °C)
• Damp or dust place
• Places exposed to rain
This camera must always be operated a AC 24V or
DC 12V Certified/Listed, class 2 power supply only.
Note: Be careful of AC frequency when the camera
is operated with Line lock mode.
• Places subject to strong vibration
• Close to generators of powerful electromagnetic
radiation such as radio or TV transmitters.
Handling of the unit
Be careful not to spill water or other liquids on the
unit. Be cautions not to get combustible or metal-
lic material inside the body. If used with foreign
matter inside, the camera is liable to fail or to get
cause of fire or electric shock.
Handling of the unit
• Remove dust or dirt on the surface of the lens
with a blower.
• Use a dry soft cloth to clean the body.If it is
very dirty,use a cloth dampened with a small
quantity of neutral detergent,then wipe dry.
• Avoid the use of volatile solvents such as thin-
ners,alcohol,benzene,and insecticides.
They may damage the surface finish and/or
impair the operation of the camera.
Operating and storage location
Avoid viewing a very bright object (such as light
fittings) during an extended period. Avoid operat-
ing or storing the unit in the following locations.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 8
Part Names and Functions
1. Lens mount cap
1
2
3
4
The cap is installed to protect the lens mount
section. Remove the lens mount cap before
installing a lens (sold separately) .
2. Flange-back adjustment dial
3. Flange-back lock screw
4. Camera installation bracket
The bracket can be fixed at the top or bottom
of the camera. (page 16)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 9
Part Names and Functions
5. Power input terminal
5(a)
6
7
8
a) AC 24 V or DC 12 V input terminal
b) AC 230 V input terminal
6. Video output connector (BNC type)
Connect this connector to a device such as a
VCR or monitor with a VIDEO IN connector.
7. Power indicator
Comes on when the power to the camera is on.
8. External Device Connectors
RS-485 Connector
Connect to an external controller of RS-485 format.
5(b)
6
7
8
Alarm Output Terminal (ALARM OUT/GND)
Connect to the alarm input of an external
device.
Multi Input Terminal
Connect to an external wired remote control.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 10
Part Names and Functions
9. Buttons for menu
9
10 11
To set items on the MEMU, use the these but-
tons on the side panel. (page 17)
10. ALC Lens Setting Switch
DC: When you attach an Auto Iris lens requir-
ing the DC control signal, please put this
switch in the DC position.
ELC: When you attach a manual or fixed lens,
please put this switch in the ELC position.
VIDEO: When you attach an Auto Iris lens
requiring the video control signal, please put
this switch in the VIDEO position.
11. Lens iris output connector (LENS)
This 4- pin connector is used to send the Iris
control signal and power supply to an auto-
iris type lens.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 11
Connections
Basic connection
The peripheral devices (VCR, monitor, lens, etc.),
3
2
AC adaptor and cables are not supplied.
1. Connecting the monitor
Make the video signal connection between the
camera and the monitor or time lapse VCR.
2. Use a commercially available AC 24 V
adaptor.
Connect an AC 24 V power source to the AC 24V
input terminal on the back of the camera.
1
3. Insert the plug of this power cord into a wall
outlet.
The POWER indicator will light. Adjust the pic-
ture on the monitor using the Brightness and
Contrast controls etc.
To monitor’s Video Input
or Camera Input
11
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 12
Mounting the Lens
1. Remove the lens mount cap from the camera.
2. Install the auto-iris lens.
2-1. CS mount type lens
Carefully align the lens mount with the camera
opening, then turn the lens slowly to install it.
1
2-2. C mount type lens
To allow for flange- back adjustment, install the
C-mount adaptor (option) on the lens mount,
then carefully align the lens mount with the
camera opening and turn the lens slowly to
install it.
2-2
2-1
3. Connect the lens plug to the lens iris output
connector (LENS) on the side of the camera.
When using lenses from other makers, the plug
shape may not correspond to the terminal on
the camera.
3
In such a case, remove the original plug and
using a soldering iron, connect a lens iris plug
according to the diagram. (Refer to next page.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 13
Concerning Auto-Iris Lenses
ELC type auto-iris lens
Use a manual or fixed iris lens (Set the ALC Lens
Setting Switch to the ELC position.)
If using a VIDEO type auto-iris lens
DC type auto-iris lens
•
Set the ALC and LEVEL controls on the lens to
adjust the iris. Normally the ALC volume should
be turned all the way to Av (Average).
A lens without driver circuit that operates only on
a DC power source. In general, this type of lens is
referred to as DC type coil lens. (Set the ALC Lens
Setting Switch to the DC position.)
•
Depending on the type of lens used, the lens
may not perform properly. In such a case, adjust
the LEVEL volume on the lens casing to correct.
VIDEO type auto-iris lens
Pin layout for the lens iris output connector
A lens with amplifier circuit that operates on video
signal and DC power source. In general, this type of
lens is referred to as EE amplifier type lens.
ALC and LEVEL volume level controls are available
on the lens for iris adjustments. (Set the ALC Lens
Setting Switch to the VIDEO position.)
No. DC type lenses
VIDEO type lenses
Vcc (+12V)
Not used
Video
Ground
1
2
3
4
Damp -
Damp +
Drive +
Drive -
CAUTION: Be cautions not to use Auto Iris Lens
with over 50mA.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 14
External Device Connections
Contact Ratings
•
•
Maximum load current is 130mA.
RS-485 (TR+)
RS-485 (TR-)
Do not connect any system or
device that has over 40 Vp-p
(DC 30 V) bias voltage on the
contact terminal.
ALARM
ALARM (OUT)
ALARM (COM)
COM
Equivalent Diagram
MULTI (INPUT)
MULTI (GND)
Notes:
Use a relay unit if the voltage or current of the
connected device exceeds the ratings.
RS-485 Connection
Connect to an external controller of RS-485 format.
Multi-Input Connection
Connect an external device to use HOT KEY func-
tion. The HOT KEY function is operated when the
input signal is “ON”. To set the HOT KEY function,
see page 35.
The Multi-Input terminal has the register of DC
3.3V pull-up. The sink current must be less than
0.8mA.
Alarm Connection
Connect an external device such as a buzzer or
lamp to the ALARM terminal. When the camera
detects motion, the alarm output signal is supplied
to the connected external device.
OFF: Open contact
ON: Closed contact
14
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 15
Flange-back Adjustment
The adjustment is required only when a lens with-
out focus-adjusting mechanism is mounted, or
when a lens with adjusting mechanism is mounted
and focus that is more accurate is needed.
1
Loosen the flange-back fixing screw on the
flange-back adjusting ring.
2. Turn the flange-back adjusting ring to obtain a
focused point while watching the monitor
screen.
3. Tighten the flange-back fixing screw on the
flange-back adjusting ring.
flange-back
fixing screw
Caution:
flange-back
Tightening the screw by force will cause damage to
the screw or deviation of focus.
adjusting ring
Note: The object may be out of focus when using a
source of near-infrared light than using the visible
light.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 16
Installation of Camera
The bracket can be installed to either the top of
the camera as desired. When changing the position
of the camera mounting bracket, you should always
reuse the screws that have been removed.
Note:
If using a camera mounting bracket, select a loca-
tion that is strong enough to bear the full weight
of the camera and the mounting bracket for long
periods, and install the camera and mounting
bracket securely.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 17
Menu Operation
This camera utilizes an on-screen user MENU. To set
items on the menu, use the following buttons on
the side panel.
Right button: Moves the cursor to the right.
Use this button to select or adjust the parame-
ters of the selected item. The parameter
changes each time this button is pressed.
Up Button
Set Button
Left button: Moves the cursor to the left. Use
this button to select or adjust the parameters
of the selected item. The parameter changes
each time this button is pressed.
Right Button
Left Button
Set button: Executes selections and displays a
submenu for an item with the
mark.
Down Button
Up button: Moves the cursor upwards. Use this
button to select an item or adjust the parame-
ters.
Down button: Moves the cursor downwards. Use
this button to select an item or adjust the
parameters.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 18
Menu Operation
To Open and Exit the Menu screen
Press and hold down
for 2 seconds or more.
The MENU screen appears on the monitor as shown
below. Check the current settings on the menu.
Press and hold down
exit the menu screen.
for 2 seconds or more to
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
PUSH AUTO
AUTO
OFF
INITIAL SET
EXIT
OFF
18
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 19
Language and Camera Identification Settings
Language Setting
Select a language for the Setup menu and on-screen display.
1. Select [LANGUAGE] option on the [MENU] screen.
2. Press left or right button to select a language.
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
PUSH AUTO
AUTO
OFF
INITIAL SET
EXIT
OFF
Camera Identification Setting
You can use the camera identification (CAMERA ID) to assign a num-
ber to the camera (0 - 255, OFF).
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
The camera identification’s number is displayed on the lower left of
the screen. To disappear the number, select [OFF].
PUSH AUTO
AUTO
OFF
1. Select [CAMERA ID] option on the [MENU] screen.
INITIAL SET
EXIT
OFF
2. Use
or
button to select a ID number of the camera.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 20
Exposure Settings
You can set the exposure options using the EXPOSURE menu.
1. Select [EXPOSURE] option on the [MENU] screen.
2. Press , or button and the EXPOSURE menu appears.
3. To reset the [EXPOSURE] settings to factory setting, select [INI-
TIAL SET] option then press on the [EXPOSURE] menu.
4. To return to the previous menu, select [RETURN] option then
press
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
,
PUSH AUTO
AUTO
OFF
INITIAL SET
EXIT
OFF
.
EXPOSURE
Brightness Setting
You can set the brightness level. (7 levels)
BRIGHTNESS
AGC MAX
SHUTTER
FLIKERLESS
BLC/WDR
LEVEL
AREA
SPECIAL
INITIAL SET
RETURN
-
+
MEDIUM
AUTO
OFF
OFF
OFF
1. Select [EXPOSURE] option on the [MENU] screen then press
,
2. Use
3. Use
, or
or
button. The EXPOSURE menu appears.
button to select [BRIGHTNESS] option.
button to set the bright level.
ON
or
20
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 21
Exposure Settings
Automatic Gain Control (AGC) setting
If the images are too dark, change the maximum [AGC] value to
make the images lighter.
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
PUSH AUTO
AUTO
OFF
1. Select [EXPOSURE] option on the [MENU] screen then press
,
2. Use
3. Use
, or
button. The EXPOSURE menu appears.
button to select [AGC MAX] option.
button to select a mode.
or
INITIAL SET
EXIT
OFF
or
OFF: AGC is not operated.
HIGH: Applies AGC with high-level.
MEDIUM: Applies AGC with middle-level.
LOW: Applies AGC with low-level.
EXPOSURE
BRIGHTNESS
AGC MAX
SHUTTER
FLIKERLESS
BLC/WDR
LEVEL
-
+
MEDIUM
AUTO
OFF
OFF
OFF
AREA
SPECIAL
INITIAL SET
RETURN
ON
21
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 22
Exposure Settings
Shutter Speed Setting (SHUTTER)
Note: When [FLICKERLESS] option is set to [ON] on the [EXPOSURE]
menu, this item is not available.
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
PUSH AUTO
AUTO
OFF
1. Select [EXPOSURE] option on the [MENU] screen then press
,
2. Use
3. Use
, or
button. The EXPOSURE menu appears.
button to select [SHUTTER] option.
button to set shutter speed.
or
INITIAL SET
EXIT
OFF
or
(AUTO, AUTO X2 - X320, FIX X2 - X320, 1/50 - 1/50000)
EXPOSURE
BRIGHTNESS
AGC MAX
SHUTTER
FLIKERLESS
BLC/WDR
LEVEL
AREA
SPECIAL
INITIAL SET
RETURN
-
+
Flickerless Setting (FLIKERLESS)
Use for removing the flicker of picture.
MEDIUM
AUTO
OFF
OFF
1. Select [EXPOSURE] option on the [MENU] screen then press
OFF
,
2. Use
3. Use
, or
button. The EXPOSURE menu appears.
button to select [FLICKERLESS] option.
button to set between [ON] or [OFF].
or
ON
or
Set to [ON] to remove the flicker.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 23
Exposure Settings
You can set the exposure options using the [EXPOSURE] menu.
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
BLC/WDR Setting
Use [BLC/WDR] option to set the options for BLC or WDR camera.
PUSH AUTO
AUTO
OFF
1. Select [EXPOSURE] option on the [MENU] screen then press
,
2. Use
3. Use
, or
or
button. The EXPOSURE menu appears.
button to select [BLC/WDR] option.
button to select a mode.
INITIAL SET
EXIT
OFF
or
(BLC1, BLC2, USER, WDR, OFF)
EXPOSURE
-
BRIGHTNESS
AGC MAX
SHUTTER
FLIKERLESS
BLC/WDR
LEVEL
AREA
SPECIAL
INITIAL SET
RETURN
+
BLC 1 - 2 (Auto back light compensation): If you use an ordi-
nary camera when there is an intense and concentrated illumina-
tion behind an object, the back light will shade the image on
the monitor screen. The BLC function prevents such a back light
effect to secure a clear image under all illumination environ-
ments.
MEDIUM
AUTO
OFF
BLC1
OFF
ON
(Continued b)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 24
Exposure Settings
USER: You can use the user setting for BLC level and BLC area.
EXPOSURE
-
BRIGHTNESS
AGC MAX
SHUTTER
FLIKERLESS
BLC/WDR
LEVEL
+
• LEVEL: Select a user BLC level to prevent such a back light
effect to secure a clear image.
MEDIUM
AUTO
OFF
USER
-
• AREA: Select a user area to prevent such a back light effect
to secure a clear image. (BOTTOM, TOP, LEFT, RIGHT, and CEN-
TER.)
+
AREA
BOTTOM
SPECIAL
INITIAL SET
RETURN
ON
WDR: The WDR camera is state of the art to enlarge the screen
profit effectively, especially for taking photos of a window in a
building. In short it revives both the indoor and outdoor status
as they are clearly.
EXPOSURE
BRIGHTNESS
AGC MAX
SHUTTER
FLIKERLESS
BLC/WDR
LEVEL
-
+
MEDIUM
AUTO
OFF
WDR
OFF
AREA
SPECIAL
INITIAL SET
RETURN
ON
24
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 25
White Balance Settings
You can set the white balance options using the [WHITE BALANCE]
MENU
menu.
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
1. Select [WHITE BAL] option on the [MENU] screen.
PUSH AUTO
AUTO
OFF
2. Press
appears.
3. To reset the [WHITE BALANCE] settings to factory setting, select
,
, or
button and the WHITE BALANCE menu
INITIAL SET
EXIT
OFF
[INITIAL SET] option then press
menu.
on the [WHITE BALANCE]
4. To return to the previous menu, select [RETURN] option then
press
.
WHITE BALANCE
WB MODE
ATW
RED ADJ
BLUE ADJ
INITIAL SET
RETURN
ON
25
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 26
White Balance Settings
Setting the WB (White Balance) Mode
You can select one of three modes for white balance adjustment as
follows:
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
ATW
AUTO
OFF
1. Select [WHITE BALANCE ] option on the [MENU] screen then
press
2. Use
3. Use
ance.
,
, or
button. The WHITE BALANCE menu appears.
or
or
button to select [WB MODE] option.
INITIAL SET
EXIT
OFF
button to select one of three modes for white bal-
ATW (Auto-Tracing White Balance): In this mode, the color tem-
perature is monitored continuously and thereby white balance is
automatically set. The color temperature range for the proper
white balance is approximately 2 500 - 9 500K. Proper white
balance may not be obtained under the following conditions:
1) The color temperature is out of the 2 500 - 9 500K range.
2) When the scene contains mostly high color temperature
objects, such as a blue sky or sunset.
WHITE BALANCE
WB MODE
RED ADJ
ATW
BLUE ADJ
INITIAL SET
RETURN
ON
3) When the scene is dim.
(Continued b)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 27
White Balance Settings
PUSH AUTO: If you select the PUSH AUTO mode in the WHITE
BALANCE menu, you will be able to set up the White Balance
WHITE BALANCE
WB MODE
PUSH AUTO
RED ADJ
BLUE ADJ
INITIAL SET
RETURN
automatically using
release.
button; press and hold
button then
ON
MANUAL: You can set the white balance options manually.
• RED ADJ: Obtains the optimum amount of red gain.
• BLUE ADJ: Obtains the optimum amount of blue gain.
WHITE BALANCE
WB MODE
RED ADJ
BLUE ADJ
INITIAL SET
RETURN
MANUAL
-
-
+
+
ON
27
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 28
Day/Night Setting
It is a function of a color camera to delete the filter with the IR Cut
MENU
function in an illumination below the standard value so that it has a
better sensitivity.
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
ATW
AUTO
OFF
1. Select [DAY/NIGHT] option on the [MENU] screen.
2. Use
or
button to select one of four modes for day/night
function.
INITIAL SET
EXIT
OFF
AUTO: The camera selects black and white mode if the picture is
dark, or color mode if the picture is bright enough.
EXT : Switches between color picture and black-and-white pic-
ture when an external day/night switching signal is received.
NIGHT: Black-and-white mode enabled.
DAY: Color mode enabled.
Note:
The AUTO mode is not available if AGC mode is set to [OFF] or
SHUTTER mode is set to a fixed mode.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 29
Motion Detector Setting (MOTION DET)
The motion detector detects the moving objects in the scene by
MENU
monitoring changes in brightness level. You can select the level of
sensitivity for motion detection.
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
ATW
AUTO
OFF
When this camera is connected to a compatible intelligent CCTV
system, the camera transmits an alarm signal by multiplexing it with
the video signal.
1. Select [MOTION DET] option on the [MENU] screen.
INITIAL SET
EXIT
OFF
2. Press
appears.
,
, or
button and the MOTION DETECT menu
3. Use [SENSITIVITY] option to obtain the optimum detection level
(7 levels).
MOTION DETECT
SENSITIVITY
AREA
INITIAL SET
EXIT
-
+
4. Use [AREA] option to select an area for motion detection.
OFF
OFF
5. To reset the [MOTION DETECT] settings to factory setting, select
[INITIAL SET] option then press
menu.
on the [MOTION DETECT]
6. To return to the previous menu, select [RETURN] option then
press
.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 30
Motion Detector Setting (MOTION DET)
This camera has an alarm function. When the picture changes, the
internal switch is closed.
4/15
TOP
•
Sensitivity
7/15
4/15
LEFT CENTER RIGHT
BOTTOM
Motion is detected when the accumulated value of changed
brightness level exceeds 10% (MEDIUM mode) of reference in
more than one area.
1/3
1/3
1/3
•
•
Condition
The alarm function performs after 10 seconds when the camera is
turned on.
Detection Area
Caution
Vcc
Motion detection malfunctions under the following situations.
Please note the conditions below.
OPEN
OPEN
Alarm
Out
-
-
If shooting an object under flickering fluorescent.
If leaves or curtains are swayed by the wind.
CLOSE
0
•
•
Alarm keep low for 1 second after the end of moving picture.
This function which is Motion Detection & Sensitivity has not
been evaluated by UL.
1. The period of motion.
2. The hold time is 1 sec.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 31
Privacy Masking Setting
This function is aiming at the protection of personal privacy, select-
MENU
ing a screen part black not to be displayed in the screen. This func-
tion permits the control of the strength level in 8 levels. You may
setup the size and location of the area.
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
ENGLISH
OFF
ATW
AUTO
OFF
1. Select [PRIVACY MASK] option on the [MENU] screen.
PRIVACY MASK
SPECIAL
2. Press
appears.
,
, or
button and the PRIVACY MASKING menu
INITIAL SET
OFF
PRIVACY MASKING
PRIVACY-1
3. Use
, or
4. Use
or
button to select a privacy number then press
button. The MASK ADJUST menu appears.
,
OFF
OFF
OFF
OFF
OFF
PRIVACY-2
PRIVACY-3
PRIVACY-4
PRIVACY-5
or
to select an option then use , or
button to
adjust the option.
• H POSITION: Moves height position of the mask.
• V POSITION: Moves vertical position of the mask.
• H SIZE: Enlarge or increase the height size of the mask.
• V SIZE: Enlarge or increase the vertical size of the mask.
MASK ADJUST
H POSITION
V POSITION
H SIZE
V SIZE
RETURN
5. To return to the previous menu, select [RETURN] option then
press
.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:06 PM Page 32
Special Menu Settings
This menu lets you adjust and set up EFFECT, D-ZOOM, USER TITLE,
MENU
TITLE DISP, and SYNC function by yourself in the SPECIAL menu.
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
1. Select [SPECIAL] option on the [MENU] screen.
ATW
AUTO
OFF
2. Press
3. Use
,
, or
button and the SPECIAL menu appears.
button to
or
to select an option then use , or
adjust the option.
INITIAL SET
EXIT
OFF
4. To reset the [MOTION DETECT] settings to factory setting, select
[INITIAL SET] option then press
menu.
on the [MOTION DETECT]
5. To return to the previous menu, select [RETURN] option then
press
SPECIAL
OFF
.
EFFECT
D-ZOOM
-
+
USER TITLE
TITLE DISP
HOT KEY
SYNC
PHASE SHIFT
PIX MAPPING
INITIAL SET
EXIT
SX-700
OFF
NEGA
INT
000
OFF
ON
32
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:06 PM Page 33
Special Menu Settings
Setting the digital effect (EFFECT)
You can select the digital effect.
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
1. Select [SPECIAL] option on the [MENU] screen.
ATW
AUTO
OFF
2. Press
3. Use
4. Use
,
, or
button and the SPECIAL menu appears.
or
or
to select [EFFECT] option
INITIAL SET
EXIT
OFF
button to select a digital effect.
• [NEGA]: Turn on the negative effect.
• [B/W]: The picture will be displayed with grayscale.
• [V-FLIP]: Flip the picture vertically.
• [MIRROR]: Turn on the mirror effect.
• [ROTATE]: Rotate the picture. (180°)
• [FREEZE]: Freeze the picture.
SPECIAL
EFFECT
D-ZOOM
USER TITLE
TITLE DISP
HOT KEY
SYNC
OFF
-
SX-700
OFF
NEGA
INT
+
• [OFF]: Turn off the digital effect.
PHASE SHIFT
PIX MAPPING
INITIAL SET
EXIT
000
OFF
ON
33
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:06 PM Page 34
Special Menu Settings
Setting the digital zoom (D-ZOOM)
You can select the digital zoom level.
This function is not available when the BLC/WDR option is set to
WDR or EFFECT option is set to FREEZE.
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
ATW
AUTO
OFF
1. Select [SPECIAL] option on the [MENU] screen.
2. Press
3. Use
4. Use
,
, or
button and the SPECIAL menu appears.
INITIAL SET
EXIT
OFF
or
or
to select [D-ZOOM] option
button to select a digital zoom level (7 level).
Naming the camera (USER-TITLE)
You can name the camera independently.
SPECIAL
EFFECT
D-ZOOM
USER TITLE
TITLE DISP
HOT KEY
SYNC
OFF
-
SX-700
OFF
NEGA
INT
000
+
1. Follow steps 1-2 as shown above.
2. Use
or
to select [USER TITLE] option
The first character of the name will blink.
PHASE SHIFT
PIX MAPPING
INITIAL SET
EXIT
3. Use
or
button to select a character for the first character
button. The second character blink.
OFF
ON
then press
4. Repeat step 3 to set the remain characters.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:06 PM Page 35
Special Menu Settings
Setting the title display
The onscreen display of camera’s name can be turned on or off.
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
1. Select [SPECIAL] option on the [MENU] screen.
ATW
AUTO
OFF
2. Press
3. Use
4. Use
,
, or
button and the SPECIAL menu appears.
or
or
to select [TITLE DISP] option
button to select [ON] or [OFF].
INITIAL SET
EXIT
OFF
Set to [ON] and the camera’s name appears on the screen.
Setting the HOT KEY
You can set the HOT KEY function for signal from MULTI INPUT
terminal. This function is fixed to [DAY/NIGHT] when DAY/NIGHT
option is set to [EXT].
SPECIAL
EFFECT
D-ZOOM
USER TITLE
TITLE DISP
HOT KEY
SYNC
OFF
-
SX-700
OFF
NEGA
INT
+
1. Follow steps 1-2 as shown above.
2. Use
3. Use
or
or
to select [TITLE DISP] option
button to select a function.
PHASE SHIFT
PIX MAPPING
INITIAL SET
EXIT
000
OFF
ON
(NEGA, B/W, V-FLIP, MIRROR, ROTATE, FREEZE, or OFF)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:06 PM Page 36
Special Menu Settings
Synchronization Setting (SYNC)
You can select internal sync (INT) mode or line-lock (LINE) mode.
The SYNC function is available only with AC power source.
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
ATW
AUTO
OFF
1. Select [SPECIAL] option on the [MENU] screen.
2. Press
3. Use
4. Use
,
, or
to select [SYNC] option.
button to select [INT] or [LL] (Line Lock).
button and the SPECIAL menu appears.
or
or
INITIAL SET
EXIT
OFF
[INT]: Selects for using the internal synchronization.
[LL] (Line Lock): Selects for the operation of multi cameras
because it synchronizes the camera phase by using the
external signal (AC Signal). A little phase deviation for some
sets may be aligned.
SPECIAL
EFFECT
D-ZOOM
USER TITLE
TITLE DISP
HOT KEY
SYNC
OFF
-
+
SX-700
OFF
NEGA
INT
000
5. Use
or
to select [PHASE SHIFT] option.
6. Use
or
button to select phase range.
The PHASE ranges are from 0 to 524.
PHASE SHIFT
PIX MAPPING
INITIAL SET
EXIT
OFF
ON
36
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:06 PM Page 37
Special Menu Settings
Setting the Pix Mapping
You can improve the picture quality with this function that compen-
sate damaged pixels.
MENU
LANGUAGE
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
PRIVACY MASK
SPECIAL
ENGLISH
OFF
ATW
AUTO
OFF
1. Select [SPECIAL] option on the [MENU] screen.
2. Press
3. Use
4. Use
,
, or
button and the SPECIAL menu appears.
or
or
to select [PIX MAPPING] option.
button to select [ON] or [OFF].
INITIAL SET
EXIT
OFF
Caution
If you are using manual lens, block the lens before using this
function.
SPECIAL
EFFECT
D-ZOOM
OFF
-
+
USER TITLE
TITLE DISP
SX-700
OFF
HOT KEY
NEGA
SYNC
INT
PHASE SHIFT
000
PIX MAPPING
INITIAL SET
EXIT
OFF
ON
37
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:06 PM Page 38
RS-485 Protocol
Data Communication Format
Commands
• Data Length: 1 Byte (8 Bit)
• Start/Stop Bit: 1 BIT
• Parity Bit: None
Function
Command
(external device → camera)
OSD Menu ON/OFF 0xC5, 0x5F, 0x25, 0x00, ID, C.S.
• Baud rate: 9,600 bps
LEFT Button
Right Button
Up Button
Down Button
Menu Button
0xC5, 0x5F, 0x38, 0x00, ID, C.S.
0xC5, 0x5F, 0x39, 0x00, ID, C.S.
0xC5, 0x5F, 0x02, 0x00, ID, C.S.
0xC5, 0x5F, 0x04, 0x00, ID, C.S.
0xC5, 0x5F, 0x24, 0x00, ID, C.S.
Format
BYTE 1 BYTE 2 BYTE 3 BYTE 4 BYTE 5 BYTE 6
0xC5
CODE1 CODE2 CODE3 CAM_ID *C.S.
*C.S. = Check Sum
• You must send “Stop” command to camera after
sending each command described above.
The “Stop” command is “0xC5, 0x5F, 0x0C, 0x00,
ID, C.S.”.
• The data of total 6 bytes is transmitted from the
external RS-485 device to the camera.
• BYTE 6 : The value of Check Sum from ‘BYTE 1 ’
to ‘BYTE 5 ’.
ex) In case of transmission, 0xC5, 0x5F, 0x02,
0x00, 0x0A”
C.S. = 0xC5 +0x5F +0x02 +0x00 +0x0A = 0x0130
therefore, C.S. = 0x30
38
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:06 PM Page 39
Specifications
Total/Effective Pixels
Pick-up Device
Lens
470K/440K Pixels
1/3” Interline Color CCD
C/CS Mount
Iris
DC/ELC/VIDEO Selectable
Digital Signal Process
2:1 Interface
Signal Process
Scanning System
Synchronization System
Scanning Frequency
Resolution
Internal/Line Lock
50 Hz (VD)
540 Lines
S/N Ratio
More than 52 dB (AGC Off)
Standard Illuminance
(1/3 Video Output)
Day: 0.001 (0.3: DSS Off) Lux
Night: 0.0001 (0.02: DSS Off) Lux
Video Output Signal
Auto Gain Control
Exposure
1.0 Vp-p Composite Signal (75 Ω)
Off/Low/Medium/High
Automatic Control with DC/Video Iris meter/ Electronic Light
39
Download from Www.Somanuals.com. All Manuals Search And Download.
LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:06 PM Page 40
Specifications
Electric Shutter
White Balance
Back Light
Motion Detection:
Power Consumption
Operation Temperature
Storage Temperature
Weight
1/50 - 1/100,000 (Auto Mode)
ATW/PUSH AUTO/MANUAL
OFF/BLC1/BLC2/USER/WDR
OFF/ON (Area, Sensitivity)
Less than 6W
-10ºC - 50ºC (Humidity: 0%RH - 80%RH)
-20ºC - 60ºC (Humidity: 0%RH - 85%RH)
250g
Dimension (H x V x D)
67.1 x 59 x 127.5 mm
P/NO : MFL30580129
40
Download from Www.Somanuals.com. All Manuals Search And Download.
|