120VAC Ionization Smoke Alarm
• 1276E
Front Loading Battery Door
Change battery without removing alarm from bracket
Test/Reset Button
Tests unit’s electronic circuitry, horn and battery function
and resets its memory after an alarming condition occurs
Hush® Feature
Temporarily silences nuisance alarms
Adjustable Mounting Bracket
Allows for fast installation and perfect alignment
Description
Installer-Friendly Features (cont.)
The Kidde 1276E smoke alarm provides the same features
and quality you expect in a Kidde manufactured product
plus a front load battery door. The front load battery
operation speeds installation and reduces battery replace-
ment by eliminating the need to remove the alarm from
the ceiling. The alarm incorporates the other contractor
friendly features pioneered by Kidde, including alarm
memory, battery pull tab, dust cover, AC quick connect
and others.
• Battery Door – Provides easy access, which reduces the
installation time and battery replacement time. Unique
design ensures owner is aware of battery backup,
because the door will not close if there is no battery or
if battery is installed incorrectly.
• Smart Interconnect – Interconnects up to 24 Kidde
devices including smoke alarms, CO alarms and heat
detector. The interconnect system should not exceed
the NFPA interconnect limit of 12 smoke alarms and/or
18 initiation alarms. With 18 alarms interconnected,
it is still possible to interconnect up to a total of
6 strobe and/or relay devices.
Installer-Friendly Features
• Alarm Memory – Flashing green LED indicates
origination alarm after condition occurs. Alarm memory
also incorporates an energy management feature that
“shuts down” the memory function if AC power is
absent. This helps reduce battery drain – especially
during the construction phase.
• Battery Pull Tab – Prevents draining battery until
permanent AC power is connected thus reducing
callbacks for battery replacement.
• Dust Cover – Protects the alarm’s sensor from dust and
debris during construction period.
• Tamper Resistant Features – Provides two tamper
resistant options: The unit can be locked to the
mounting bracket to prevent the alarm from being
removed from the ceiling or wall. The battery door can
also be locked to prevent battery removal. Neither
option requires the use of additional components.
• AC Quick Connect – Wiring pigtail installs quickly with
snap-on harness. Uses same Kidde standard quick-
connect, allowing for easy upgrade.
Download from Www.Somanuals.com. All Manuals Search And Download.
|