AUDIO VIDEO SURROUND RECEIVER
-
VRS 6200
INSTRUCTION MANUAL
KENWOOD CORPORATION
Quick Start Reference
Please read the following pages so that you can enjoy the surround sound at the best
condition.
(These pages give shortcut explanations on how to connect the speaker system to the
receiver, set up the speakers and play a source.)
"Let's play DVD video software" $%
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has
several operation modes. These modes enable the remote control to control otherKENWOOD
DVD players. In order to effectively use the remote control, it is important to read the operating
instructions and obtain a proper understanding of the remote control and how to switch its
operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the
operation modes may result in incorrect operations.
B60-5588-10 01 CS ( K, P, E, X, Y ) KW 0410
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying power
How to use this manual
Special features
This manual is divided into four sections, Preparations, Operations,
Remote Control, and Additional Information.
True home theater sound • ~ ª
This receiver incorporates a wide variety of surround modes to bring you
maximum enjoyment from your video software. Select a surround mode
according to your equipment or the software you are going to play and enjoy!
Preparations
Shows you how to connect your audio and video components to the
receiver and prepare the surround processor. Since this receiver
works with all your audio and video components, we will guide you in
setting up your system to be as easy as possible.
÷ Dolby Digital EX
÷ Dolby PRO LOGIC IIx, Dolby PRO LOGIC II
÷ Dolby Digital
÷ DTS-ES
Operations
÷ DTS NEO:6
÷ DTS
Shows you how to operate the various functions available on the
receiver.
÷ DSP Mode
Remote Control
Shows you how to operate other components using the remote
control, as well as a detailed explanation of all remote control opera-
tions. Once you have setup the remote control, you’ll be able to
operate both this model and your KENWOOD DVD player using the
remote control supplied with this model.
ACTIVE EQ
¡
ACTIVE EQ mode will produce a more dynamic sound quality in any
condition. You can enjoy a more impressive sound effect when ACTIVE
EQ is turned on during Dolby Digital and DTS playback.
Additional Information
Shows you additional information such as "In case of difficulty"
Remote control
›
In addition to the basic receiver, the remote control supplied with this
(trouble shooting) and "Specifications".
receiver can also operate KENWOOD DVD player.
Unpacking
RDS (Radio Data System) tuner (For Europe and Australia)
§
The receiver is equipped with an RDS tuner that provides several
convenient tuning functions: RDS Auto Memory, to automatically preset
up to 40 RDS stations broadcasting different programs; station name
display, to show you the name of the current broadcast station; and PTY
search to let you tune stations by program type.
Unpack the unit carefully and make sure that all the accessories
are present.
Remote control unit
(For the U.S.A. and Canada)
(1)
FM indoor antenna (1)
Channelspaceswitching(ExceptfortheU.S.A.,
Canada, Europe and Australia)
The space between radio channels has been set to the one that prevails
in the area to which the system is shipped. However, if the current
channel space setting does not match the setting in the area where the
system is to be used, for instance when you move from area 1 or area
2 shown in the following table or vice versa, proper reception of AM/FM
broadcasts cannot be expected. In this case, change the channel space
setting in accordance with your area by referring to the following table.
Batteries (R03/AAA)
(2)
(Except for the U.S.A. and
Canada)
FM indoor antenna (1)
CHANNEL
Area
Space Frequency
*AC plug adapter (1)
U.S.A., Canada and South
American countries
FM: 100 kHz
AM: 10 kHz
1.
2.
AM loop antenna (1)
FM: 50 kHz
AM: 9 kHz
Other countries
50µs
AM 9kHz
FM 50kHz
75µs
AM 10kHz
FM 100kHz
DE-EMPHASIS
CHANNEL SPEACE
* Use to adapt the plug on the
power cord to the shape of the
wall outlet. (Accessory only for
regionswhereuseisnecessary.)
If any accessories are missing, or if the unit is damaged or fails
to operate, notify your dealer immediately. If the unit was
shipped to you directly, notify your shipper immediately.
Kenwood recommends that you retain the original carton and
packing materials in case you need to move or ship the unit in
the future.
Turn the power OFF by pressing the ON/STANDBY
key
before moving the switch level. Move the switch lever to match
your area with a small screwdriver or other pointed tool, then
turn the power ON again.
Keep this manual handy for future reference.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying power
Contents
Caution : Read the pages marked
carefully to ensure safe operation.
Before applying power..................... 2
Ambience effects .................................. 28
Surround modes........................... 28
Surround play ............................... 30
Convenient functions ........................... 32
Adjusting the SOUND .................. 32
Display dimmer adjustment ......... 33
Sleep timer ................................... 33
Safety precautions ................... 2
How to use this manual ................. 3
Unpacking....................................... 3
Special features.............................. 3
Channel space switching (Except for
the U.S.A., Canada, Europe and Aus-
tralia) ............................................... 3
Contents ......................................... 4
Names and functions of parts ............... 5
Main unit ........................................ 5
Remote control unit ....................... 6
Setting up the system............................ 7
Connecting a DVD player ............... 8
Connecting video components, audio
components ................................... 9
Digital connections ......................... 9
Connecting the speakers ............. 10
Connecting the speaker terminals ... 11
PRE OUT jacks connections ........ 12
Connecting to the GAME/FRONT
AUX jacks .................................... 12
Connecting the antennas ............. 13
Preparing the remote control ....... 13
Operations
Basic remote control operations for
KENWOOD DVD players ...................... 34
DVD player operation keys........... 34
Remote
Control
In case of difficulty................................ 35
Specifications (For U.S.A. and Canada)
........................................................... 37
Specifications (For Europe and Australia)
........................................................... 38
Specifications (Except for the U.S.A.,
Canada, Europe and Australia) ............. 39
Preparations
Additional
Information
Let’s play DVD video software ........ 14
Preparing for playback ......................... 16
Speaker settings .......................... 16
Normal playback................................... 20
Listening to a source component ... 20
Adjusting the sound ..................... 21
Recording .............................................. 23
Analog sources .............................. 23
Digital sources............................... 23
Listening to radio broadcasts.............. 24
Tuning (non-RDS) radio stations ... 24
Presetting radio stations .............. 24
Receiving preset stations............. 25
Receiving preset stations in order
(P.CALL) ........................................ 25
Using RDS (Radio Data System)
(For Europe and Australia) .............. 26
Presetting RDS stations (RDS
AUTO MEMORY) ....................... 26
Using the RDS DISP. (Display) key
Operations
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry
cloth. Do not use thinner, benzine, alcohol, etc. for these agents may
cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could cause a malfunction. Be
specially careful not to use contact cleaners containing oil, for they
may deform the plastic component.
..................................................... 26
Tuning by Program TYpe (PTY search)
..................................................... 27
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Main unit
Input mode indicators
CLIP indicator
ACTIVE EQ indicator,
96 kHz fs indicator
MUTE indicator
Listenmodeindicators
Speaker selection indicators,
Frequency display,
Input display,
Preset channel display,
Listen mode display
Input channel indicators (The Input channel
indicators lights up to indicate the channels
contained in the input signal. The "S"
indicator lights when the surround
Sleep timer indicator, TONE indicator,
AUTO indicator, ST. indicator,
TUNED indicator,
component consists of a single channel.)
For Europe and Australia :
RDS indicator, PTY indicator
Display
1
2 3 4 5 6
7
8
9
0
!
@
View when the GAME/FRONT AUX jack cover is open.
^ %
$
#
1 ON/STANDBY key
Use to turn the power ON/STANDBY.^
STANDBY indicator
7 AUTO/MONO key
# SETUP key
Use to select the auto or manual tuning
Use to select the speakers' settings etc.
$^
mode.
¢
Lights when the power is in the standby
mode.
8 Dolby D indicator
$ LISTEN MODE key
Lights when the receiver is in the Dolby
Use to select the listening mode.
º
2 F.AUX MODE key
UsetoswitchthestatusofFRONTAUXmode.
)
Digital mode.
º
% GAME/FRONT AUX jacks @)
DTS indicator
^ PHONES jack
Lights when the receiver is in the DTS mode.
º
Use for headphone listening.
™
Use to switch the status of REC mode.
£
3 INPUT MODE key
LOUDNESS indicator
Lights when the LOUDNESS mode is ON.
¡
Usetoswitchbetweenthefullauto,digitaland
analog input.
7
4 SOUND key
9 MULTI CONTROL button
Use to control a variety of settings.
$^
Use to adjust the sound quality and the ambi-
ence effects.
(¤
5 MEMORY key
0 ACTIVE EQ key
Use to store radio stations in the preset
Use to switch the status of ACTIVE EQ.
¡
)
)
Standby mode
memory.
¢§ ! VOLUME CONTROL knob
While the standby indicator is lit, a small
amount of power is supplied to the system to
back up the memory. This is called standby
mode. Under the condition, the system can
be turned ON by the remote control unit.
6 BAND key
Use to adjust the receiver volume.
Use to select the broadcast band.
@ INPUT SELECTOR key
¢§
Use to select input sources.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Remote control unit
1 SLEEP key
( SETUP key
Use to set the Sleep timer.
‹
Use to select the speakers’ settings etc.
^
TUNER
VIDEO
SLEEP
DVD
DVD
AUX
RECEIVER
2 Input Selector keys (TUNER, VIDEO,
DVD, AUX, GAME/F. AUX)
Use to select input sources.
Use to operate the DVD component. ›
) TONE key
GAME/F.AUX
)
3 Numeric keys
Use to switch the status of TONE control.
INPUT MODE
SETUP
If tuner is selected as the input source,
these keys are used to call up station
¡
¡ SOUND key
1
4
2
5
8
0
3
6
presents.
∞
Use to adjust the sound quality and the ambi-
Use to operate the DVD component. ›
ence effects.
(¤
4 LISTEN MODE key
TONE
™ DIMMER key
Use to select the listening mode.
5 ACTIVE EQ key
Use to switch the status of ACTIVE EQ.
6 TOP MENU key
º
¡
7
9
Use to adjust the brightness of the display.
‹
DIMMER
SOUND
Use to operate the DVD component. ›
£ MULTI CONTROL (%/fi) keys
Use to control a variety of settings as well as in
+10
Use to operate the DVD component. ›
LISTEN MODE ACTIVE EQ
MULTI CONTROL
7 %/fi/@/# keys
tuning of radio broadcasting.
¢ MENU key
Use to operate the DVD component.
∞ VOLUME (%/fi) keys
Use to adjust the receiver volume.
§ ON SCREEN key
^
›
)
›
Use to operate the DVD component. ›
ENTER key
TOP MENU
MENU
VOLUME
Use to operate the DVD component. ›
8 RETURN key
Use to operate the DVD component.
9 BAND key
›
ENTER
Use to operate the DVD component.
¶ AUTO/MONO key
Use to select the broadcast band.
¢
3/8 key
Use to select the auto or manual tuning mode.
RETURN
ON SCREEN
AUTO/MONO
7
Use to operate the DVD component. ›
¢
BAND
0 8 key
7 key
MUTE
8
6
Use to operate the DVD component. ›
Use to operate the DVD component. ›
! P.CALL keys
P. CALL
TUNING
• MUTE key
Use to temporarily mute the sound.
ª TUNING keys
Iftunerisselectedastheinputsource,thesekeys
4
¢
1
¡
™
function as preset channel call keys.
∞
4/¢ keys
Use to operate the DVD component. ›
Use to tuning of radio broadcasting. ¢
BASS BOOST
AUDIO
LOUDNESS
SUBTITLE
DISC SEL.
ANGLE
DISC SKIP
REPEAT
1/¡ keys
Use to operate the DVD component. ›
º DISC SEL. key
@ LOUDNESS key
Use to switch the status of LOUDNESS.
¡
Use to operate the DVD component. ›
DISC SKIP key
Use to operate the multi-DVD component.
›
# BASS BOOST key
For Europe and
Australia
Use to select the maximum adjustment set-
ting for the low frequency range.
$ AUDIO key
Use to operate the DVD component.
% SUBTITLE key
¡
›
›
RDS DISP.
DISC SEL.
PTY
DISC SKIP
LOUDNESS
(For Europe and Australia)
RDS DISP. key
Use to receive RDS broadcast.
SUBTITLE
ANGLE
REPEAT
§
¶
Use to operate the DVD component.
PTY key
Use for PTY search.
⁄ REPEAT key
Use to operate the DVD component. ›
¤ ANGLE key
^
&
DVD key
Use to turn the DVD component ON/OFF.
›
If the name of a function is different on the
receiver and on the remote control, the
name of the remote control key in this
manual is indicated in parentheses.
RECEIVER key
Use to turn the receiver ON/STANDBY.
Use to operate the DVD component. ›
^
* INPUT MODE key
Usetoswitchbetweenthefullauto,digitaland
analog input.
7
÷
Some keys can be used for operating KENWOOD DVD players by pressing DVD
key beforehand. ›
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Input mode settings
CAUTION
Make sure that the power cord plug is disconnected from the AC wall
outlet before proceeding to connections. Also be sure to disconnect the
power cord plug from the AC wall outlet before changing connections.
For the connections of other system components, see pages 8 to 13.
DVD, VIDEO and GAME (FRONT AUX) inputs each include jacks for
digital audio input and analog audio input.
TheinitialfactorysettingsforaudiosignalplaybackforDVD, VIDEO
and GAME (FRONT AUX) are full auto.
After completing connections and turning on the receiver, follow the
steps below.
When connecting an associated system component, be sure to read
its instruction manual.
Microcomputer malfunction
Input selector keys
If operation is not possible or an erroneous display appears, even
INPUT MODE
though all connections have been made properly, reset the micro
computer referring to "In case of difficulty".
fi
Notes
INPUT SELECTOR
1. Be sure to turn off the system components before connecting them.
2. Be sure to insert every connection cable completely into the jack.
Incomplete connection may result in absence of audio output or
production of noise.
3. Be sure to disconnect the power cord from the AC wall outlet before
inserting or removing a connection cable.
INPUT MODE
4. Installation of outdoor antenna is a dangerous work. Please have your
dealer or a specialized technician install it.
1 Use the INPUT SELECTOR key (or input selector keys)
to select DVD, VIDEO or GAME (FRONT AUX).
Analog audio connections
Audio connections are made using RCA pin cords. These cables transfer
stereo audio signal in an "analog" form. This means the audio signal
corresponds to the actual audio of two channels. These cables usually
have 2 plugs on each end, one red for the right channel and one white for
the left channel.
2 Press the INPUT MODE key.
Each press switches the setting as follows:
1 "F-AUTO": Auto detect
("AUTO DETECT" indicator lights up)
2 "D-MANUAL": Fixed to digital input
("DIGITAL" indicator lights up)
These cables are to be prepared separately by the user.
3 "ANALOG": Fixed to analog input
*
CAUTION
("AUTO DETECT", "DIGITAL" indicator goes off)
Can not be selected for DTS playback.
Be sure to adhere to the following, or proper ventilation will be
*
blocked causing damage or fire hazard.
Auto detect:
÷ Do not place any objects impairing heat radiation onto the top of
the unit.
In "F-AUTO (FULL AUTO)" mode ("AUTO DETECT" indicator light
up), the receiver detects the digital or analog input signals
automatically. The receiver will select the input mode and listen-
ing mode automatically during playback to match the type of input
÷ Leave some space around the unit (from the largest outside
dimension including projection) equal to or greater than, shown
below.
signal (Dolby Digital, PCM, DTS) and the speaker setting.
º
Top panel
Side panel
Back panel
: 10 cm (3-15/16")
: 10 cm (3-15/16")
: 10 cm (3-15/16")
The "DIGITAL" indicator lights up when a digital signal is detected.
The "DIGITAL" indicator is extinguished when no digital signal is
detected.
÷ Do not use the appliance on a bed, sofa, rug or similar surface.
Otherwise, absorption of dust may cause a fire hazard.
Fixed to digital input:
Select this mode if you want to keep the decoding condition
(Dolby Digital, DTS, PCM, etc.) in the current listen mode.
When "D-MANUAL (DIGITAL MANUAL)" mode is selected, the
set listen modes may be changed automatically depending on the
CAUTION
The power in this equipment will not be completely cut off from the wall
outlet when the power switch is turned off.
input signal.
º
Install the equipment so that the wall outlet is easily accessible and, in
case of emergency, immediately unplug the power cord from the wall
outlet.
Fixed to analog input:
Select this setting to play analog signals from a VCR, etc.
If the INPUT MODE key is pressed quickly, sound may not be
produced. Press the INPUT MODE key again.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting a DVD player
If you have connected a DVD player to the receiver with digital connection, be sure to read the "Input mode settings" section carefully.
7
To AC wall
outlet
OPT.
L
VIDEO
COAXIAL
DVD
R
DIGITAL IN
IN
AUX IN
VIDEO IN
DVD
MONITOR
AUDIO LINE
OUT or
MIX LINE OUT
(Audio cord)
COMPOSITE
VIDEO OUT
(Yellow RCA
pin cord)
COMPOSITE
VIDEO IN
(Yellow RCA
pin cord)
DVD player
Monitor TV
DIGITAL OUT (AUDIO)
(Coaxial cord)
÷ Digital audio connections are required when playing multi-channel signals such as the Dolby Digital and DTS signals.
÷ To play the DVD player connected in this page, select the "DVD" input selector.
)
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting video components, audio components
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals.
Connect components capable of outputting DTS, Dolby Digital or
PCM (CD) digital signals.
Audio components
If you have connected components with the digital audio output to the
receiver with digital connection, be sure to read the "Input mode settings"
L
section carefully.
7
R
AUDIO LINE OUT (Audio cord)
AUX IN
VIDEO IN (Yellow RCA
MONITOR
pin cord)
Monitor TV
OPT.
VIDEO
COAXIAL
DVD
DIGITAL IN
REC OUT PLAY IN
VIDEO OUT
VIDEO IN
VIDEO
REC OUT PLAY IN
OPTICAL DIGITAL
OUT (AUDIO)
(Optical fiber cord)
CD player
AUDIO LINE
IN
(Audio cord)
AUDIO LINE
OUT
(Audio cord)
VIDEO IN
(Yellow RCA
pin cord)
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Video deck, Cassette
deck or MD recorder
VIDEO OUT
(Yellow RCA
pin cord)
Connect the video signal and analog
audio signals to the VIDEO jacks.
(See "Connecting video compo-
nents, audio components".)
DTS disclaimer clause
When playing DTS-encoded discs, excessive noise will be exhib-
ited from the analog stereo outputs of the CD or DVD player. To
enjoy DTS Digital Surround™ playback, this unit must be con-
nected to the digital output of the CD or DVD player.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the speakers
Whether each speaker is connected properly can be
confirmed by outputting the test tone and checking if
each speaker channel outputs audio. For details, see
"Speaker settings" (Step 5 Adjust the speaker volume
CAUTION
Make sure that the power cord plug is disconnected from the AC
wall outlet before proceeding to speaker cord connections.
If the conductor wires on the extremity of speaker cord are
untwisted, there is a risk of short-circuiting. Be sure to twist
them well before connecting the speaker cord.
level).
*
For the U.S.A., Canada, Europe and Australia
Except for the U.S.A., Canada, Europe and Australia
Front Speakers
Front Speakers
Left
Left
Right
Right
Surround Speakers
Be sure to connect both sur-
round speakers
Surround Speakers
Be sure to connect both sur-
round speakers
Left
Right
Left
Right
Center Speaker
Center Speaker
SPEAKERS
(8-16Ω)
R
L
C
R
L
SURR
FRONT
R
L
C
R
L
FRONT
SURR
SPEAKERS (8-16Ω)
L
R
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the speaker terminals
Speaker placement
1 Strip coating.
3 Insert the cord.
Center speaker (C)
Subwoofer (SW)
Twist
Front
Front
speaker (L)
speaker (R)
4 Return the lever.
2 Push the lever.
Surround
speaker (LS)
Surround
speaker (RS)
Listening
position
Surround back
speaker (LB)
Surround back
speaker (RB)
¶ Never short circuit the + and – speaker cords.
¶ If the left and right speakers are connected inversely or the
speaker cords are connected with reversed polarity, the sound
will be unnatural with ambiguous acoustic imaging. Be sure to
connect the speakers correctly.
Frontspeakers:PlacetheleftandrightspeakersateachsideofyourTV.
Angle the speakers towards the listening area to enhance the stereo
effect.
Center speaker : Place front and center. This speaker stabilizes the
sound image and helps recreate sound motion. Required for surround
playback.
Surround speakers : Place the surround speakers as high as possible,
either directly to the sides of the listening area or else slightly behind
the listening area. Adjust the angles so that these speakers are facing
directly towards the listeners.
Speaker impedance
After confirming the speaker impedance indications printed on the
rear panel of the receiver, connect speakers with matching imped-
ance ratings. Using speakers with a rated impedance other than that
indicated on the rear panel of the receiver could result in malfunctions
or damage to the speakers or receiver.
Subwoofer : Usually, place the subwoofer in the front center position in
thelisteningroom,nearoneofthefrontspeakers.(Sincethesubwoofer
has less directivity than other speakers, it can be placed almost in any
position that can offer the best low frequency reproduction according
to the room layout.)
Surround back speakers : Place the surround back speaker behind the
listening position, at the same height as the left and right surround
speakers.
¶ Although the ideal surround system consists of all the speakers listed
above, if you don't have a center speaker or a subwoofer, you can
divide those signals between the available speakers in the speaker
settings steps to obtain the best possible surround reproduction from
the speakers you have available.
^
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
PRE OUT jacks connections
Connecting to the GAME/FRONT AUX jacks
The receiver has additional PRE OUT jacks. Note that the output from the
PRE OUT jacks needs to be connected to an external power amplifier.
If you want to connect surround back speakers to these jacks, be always
sure to connect two surround back speakers for the left and right.
If you use a component that you do not usually connect to the receiver,
such as a portable video camera, connect it to the GAME/FRONT AUX
jacks on the front panel of the receiver. These jacks are particularly
convenient when dubbing audio/video from a portable video camera.
INPUT SELECTOR
L
R
L
R
SUB WOOFER
SURROUND BACK
PRE OUT
VIDEO
OUT
Surround Back speakers
AUDIO
OUT
OPTICAL DIGITAL
OUT (AUDIO)
L
R
Power amplifier
Subwoofer
Power amplifier
Game Player
Powered subwoofer
¶ The DIGITAL IN (OPTICAL) jack in the GAME/ FRONT AUX jack
¶ Connecting a speaker cord directly to a PRE OUT jack will not
section can be used for connection of digital audio input. This is
produce any sound from the speaker.
convenientforplayingavideogamethroughthereceiver.
)
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the antennas
Preparing the remote control
The broadcast reception cannot be made unless the antennas are
connected. Connect the antennas correctly as instructed below.
Loading the batteries
AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible
from the receiver, TV set, speaker cords and power cord, and adjust the
direction for best reception.
1 Remove the cover.
2 Insert the batteries.
AM antenna terminal connections
1 Push lever.
2 Insert cord.
3 Release lever.
3 Close the cover.
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
¶ Insert two AAA-size (R03) batteries as indicated by the
FM antenna terminal connections
polarity markings.
Insert the connector
Remote control operation
When the STANDBY indicator is lit, the power turns ON when you press
the
RECEIVER on the remote control. When the power comes ON,
(For the U.S.A. and Canada)
(Except for the U.S.A. and Canada)
press the key you want to operate.
FM outdoor antenna
Remote sensor
Operating range
(Approx.)
Leadthe75Ω coaxialcableconnectedtotheFMoutdoorantennaintothe
room and connect it to the FM 75Ω terminal.
For the U.S.A. and Canada
FM indoor antenna
6m (20 ft.)
Except for the U.S.A. and Canada
RECEIVER
FM indoor antenna
ANTENNA
AM
GND
FM 75Ω
¶ When pressing more than one remote control key successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
Notes
Use an antenna
adaptor
(Commercially
available)
1. The supplied batteries may have shorter lives than ordinary batteries
due to use during operation checks.
Attach to
the stand
2. When the remote-controllable distance gets shorter than before,
replace both batteries with new ones.
3. Placing the remote sensor in direct sunlight, or in direct light from a
high frequency fluorescent lamp may cause a malfunction.
In such a case, change the location of the system installation to
prevent malfunction.
AM loop antenna
FM outdoor antenna
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Let’s play DVD video software
CAUTION
Make sure that the power cord plug is disconnected from the AC wall outlet before proceeding to speaker cord connections.
If the conductor wires on the extremity of speaker cord are untwisted, there is a risk of short-circuiting. Be sure to twist them well before
connecting the speaker cord.
Connect the speakers, DVD and TV
to the receiver.
STEP 1
Set up the speakers.
STEP 2
For details, see "Setting up the system" 7 ~ !
For details, see "Speaker settings" . ^ ~ (
ON/STANDBY INPUT SELECTOR
Connection of speakers:
SPEAKERS
(8-16Ω)
ANTENNA
AM GND
OPT.
VIDEO
L
R
L
C
R
L
COAXIAL
DVD
SURR
FM 75Ω
FRPNT
L
R
DIGITAL IN
R
REC OUT PLAY IN
IN
SUB WOOFER
PRE OUT
SURROUND BACK
AUX IN
SETUP
VIDEO OUT VIDEO IN VIDEO IN
VIDEO DVD
MULTI CONTROL @ / #
MONITOR
1Connect the power cord to the AC wall outlet and press the
ON/STANDBY key.
2Press the SETUP key, press the MULTI CONTROL button to
select "SP SETUP" and press the SETUP key.
SW
L
R
C
LS RS
Powered
subwoofer
Front
Speakers
Center
Speaker
Surround
Speakers
If you connect KENWOOD speaker system
KS-2200HT, KS-3200HT, KS-5200HT, KS-7200HT or
KS-8200HT:
C
R
L
RECEIVER
DVD
RS
LS
1 Press the MULTI CONTROL button to select the model of
the connected speaker system, and press the SETUP key.
1 "HTB 1": Speaker system KS-2200HT*.
SW
2 "HTB 2": Speaker system KS-3200HT*, KS-5200HT*, KS-7200HT*.
3 "HTB 3": Speaker system KS-8200HT*.
* Model availability may differ depending on the country and
sales area.
÷ When the speaker setting is set to "HTB 1", "HTB 2" or
"HTB 3", the DOLBY PRO LOGIC IIx, DTS-ES and DOLBY
DIGITAL EX listen modes cannot be selected.
Connection of DVD player:
Analog audio connection
Composite video
connection
2 When "TEST TONE" is displayed, press the MULTI
CONTROL button to select "EXIT" and then press the
Digital audio connection
(Coaxial code)
SETUP key.
÷ More detailed settings such as the volume level of each speaker
and distance to each speaker are also available. * ~ (
SPEAKERS
(8-16Ω)
ANTENNA
AM GND
OPT.
VIDEO
L
R
L
C
R
L
COAXIAL
DVD
SURR
FM 75Ω
FRPNT
L
R
DIGITAL IN
R
REC OUT PLAY IN
IN
SUB WOOFER
SURROUND BACK
AUX IN
PRE OUT
VIDEO OUT VIDEO IN VIDEO IN
VIDEO
DVD
MONITOR
Connection of TV monitor:
Composite video
connection
SPEAKERS
(8-16Ω)
ANTENNA
OPT.
VIDEO
L
R
L
C
R
L
COAXIAL
DVD
SURR
AM GND
FM 75Ω
FRPNT
L
R
DIGITAL IN
R
REC OUT PLAY IN
IN
SUB WOOFER
SURROUND BACK
AUX IN
PRE OUT
VIDEO OUT VIDEO IN VIDEO IN
VIDEO DVD
MONITOR
Continued to next page
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Let’s play DVD video software
3 Press the SETUP key until "TEST TONE" is displayed,
press the MULTI CONTROL button to select "EXIT"
and then press the SETUP key.
If you use another speaker system want a setup
according to it:
÷ More detailed settings such as the volume level of each
speaker and distance to each speaker are also avail-
able. * ~ (
1 Press the MULTI CONTROL button to select "CUSTOM"
and press the SETUP key to select each of the speaker
setup items.
2 Press the MULTI CONTROL button to select the speaker
setup item and press the SETUP key.
Play a disc on the DVD player.
STEP 3
Subwoofer
: "SUBW"
] "ON" or "OFF"
Front speakers
: "FRNT"
] "LRG" or "NML"
1Press the INPUT SELECTOR key to select "DVD".
2Start playback of the DVD player.
Center speaker
: "CNTR"
] "LRG", "NML" or "OFF"
For the operation, also refer to the instruction manual for your
Surround speakers
: "SURR"
] "LRG", "NML" or "OFF"
DVD player.
Back Surround speakers : "BS"
] "LRG", "NML" or "OFF"
÷ You can select various listen modes to enjoy surround
Subwoofer re-mix setting : "REMIX"
] "ON" or "OFF"
playback of various kinds of video software.
º
"ON" : A subwoofer is connected.
Subwoofer re-mix setting mode to the receiver is ON.
"OFF" : No speaker is connected.
Subwoofer re-mix setting mode to the receiver is OFF.
"LRG" : Relatively large-size speakers.
"NML" : Normal-size speakers.
÷ When the subwoofer is set to "SUBW OFF", the front speaker
is set automatically to "FRNT LRG".
÷ Options "LRG" for the center speaker, surround speakers and back
surround speakers can be selected only when the front speakers
setting is "FRNT LRG". However, when the center speaker setting is
"CNTR NML", option "LRG" for the surround speakers cannot be
selected. Also, when the surround speaker setting is "SURR NML",
option "LRG" for the back surround speakers cannot be selected.
Subwoofer re-mix setting
If "REMIX ON" is selected as the subwoofer re-mix setting,
the low frequencies are enhanced by adding the low fre-
quencies of other channels to the subwoofer channel or
adding the low frequencies of the subwoofer to other
channels depending on the speaker setup.
Example: 5.1 ch Surround System
Subwoofer
: "SUBW"
] "ON"
Front speakers
: "FRNT"
: "CNTR"
: "SURR"
: "BS"
] "LRG"
] "NML"
] "NML"
] "OFF"
] "ON"*
Center speaker
Surround speakers
Back Surround speakers
Subwoofer re-mix setting : "REMIX"
* When the subwoofer setting is "SUBW ON", front speakers setting
is"FRNTLRG"andastereosourceisplayed,thelowfrequenciesmay
be reproduced through the front speakers and no audio output from
thesubwooferincertainlistenmodes.Inthiscase,thelow-frequency
signalcanbeoutputfromthesubwooferbyselecting"REMIXON"for
the subwoofer re-mix setting.
÷ When the speaker setting is set to "BS OFF", the DOLBY PRO
LOGIC IIx, DTS-ES and DOLBY DIGITAL EX listen modes
cannot be selected.
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for playback
4Select a speaker system.
Speaker settings
1 Select "SP SETUP" and press the SETUP key again so
that the speaker system indication "SP SYSTEM"
scrolls across the display.
To enable you to obtain optimum enjoyment from the receiver’s listening
modes, make sure to complete the speaker settings (Subwoofer, Front,
Center, Surround and Surround Back speakers) as described below.
RECEIVER
TUNER, VIDEO, AUX,
GAME/F.AUX
SETUP
SOUND (
MULTI CONTROL %/fi
2 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select the speaker system
setting.
ON/STANDBY
MULTI CONTROL @/#
1 "HTB1":Select"HTB1"ifyouusespeakersystemKS-2200HT*.
2 "HTB2":Select"HTB2"ifyouusespeakersystemKS-3200HT*,
KS-5200HT*, KS-7200HT*.
3 "HTB3":Select"HTB3"ifyouusespeakersystemKS-8200HT*.
4 "CUSTOM": Select to set up the speakers according to
the speaker system in use. (Speaker setup is required
every time after the speaker system is changed.)
SETUP
SOUND (
*
Model availability may differ depending on the country
and sales area.
1Turn on the power to this receiver by pressing the
ON/STANDBY key (or RECEIVER key).
÷
÷
When the setting "HTB 1", "HTB 2" or "HTB 3" is selected, the
procedure skips to step 5.
When you use a KENWOOD speaker system and select
"HTB1", "HTB2"or"HTB3" set the speaker setup, the audio
will be corrected automatically according to the speaker
characteristics.
2If you want to use the remote control unit, press the TUNER,
VIDEO, AUX or GAME/F.AUX key on the remote to set it to the
receiver control mode.
3Initiate the setup mode.
÷
When the speaker setting is set to "HTB 1", "HTB 2", "HTB 3 " or
"BS OFF" the DOLBY PRO LOGIC IIx, DTS-ES and DOLBY
DIGITAL EX listen modes cannot be selected.
1 Press the SETUP key.
2 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) for the following displays.
1 "SP SETUP"
3 Forgeneralspeakersetting,usetheMULTI CONTROL
button (or the MULTI CONTROL %/fi keys) to select
"CUSTOM", and press the SETUP key again.
2 "TEST TONE"
3 "DISTANCE"
÷
The subwoofer setting indication "SUBW" appears.
4 "LFE LEVEL"
5 "EXIT"
÷ While the main setup display is appeared, the setup mode
can be canceled by selecting "EXIT" and then pressing the
SETUP key.
4 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select the appropriate
subwoofer setting.
The flow of the SETUP is as follows;
SP SETUP
TEST TONE
AUTO MANUAL
DISTANCE
LFE LEVEL
EXIT
1 "SUBW ON" :
HTB 1
HTB 2
HTB 3
Custom
When a subwoofer is connected.
2 "SUBW OFF" :
Front Left
Center
L
C
R
L
C
When no subwoofer is connected.
Subwoofer
Front
RS
RB
LB
R
Front Right
÷
÷
The initial setting is "SUBW ON".
RS
Right Surround
When "SUBW OFF" is selected and the selection is
established by pressing the SETUP key in step 5 be-
low, the front speakers are set automatically to "FRNT
LRG" and the procedure jumps to step 8.
LS
Center
SW
RB
LB
Surround Back Right
Surround Back Left
Left Surround
Surround
Surround
Back
LS
SW
5 Press the SETUP key to accept the setting.
Subwoofer
Re-mix
÷
The front speakers setting indication "FRNT" appears.
Continued to next page
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for playback
6 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select the appropriate
front speakers setting.
@ Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select appropriate sur-
round back speaker setting.
1 "BS LRG":
1 "FRNT LRG":
*
Large surround back speaker is connected to the re-
Large front speakers are connected to the receiver.
2 "FRNT NML":
ceiver.
2 "BS NML":
Average size front speakers are connected to the
receiver.
Average size surround back speaker is connected to the
receiver.
÷
When the subwoofer setting is "SUBW ON", front speakers
setting is "FRNT LRG" and a stereo source is played, the low
frequencies may be reproduced through the front speakers and
no audio output from the subwoofer in certain listen modes. In
this case, set the subwoofer re-mix setting in step $ to "REMIX
ON" to output the low frequencies from the subwoofer.
3 "BS OFF":
When no surround speakers are connected.
"BS LRG" cannot be selected when the surround
*
speaker have been set to "SURR NML".
7 Press the SETUP key to accept the setting.
The center speaker setting indication "CNTR" appears.
÷
8 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select the appropriate
center speaker setting.
# Press the SETUP key to accept the setting.
÷
The subwoofer re-mix setting indication "SW RE-MIX" appears.
1 "CNTR LRG":
*
A large center speaker is connected to the receiver.
2 "CNTR NML": An average size center speaker is
connected to the receiver.
$ Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select the appropriate
subwoofer re-mix setting.
3 "CNTR OFF" :
If "REMIX ON" is selected as the subwoofer re-mix setting,
the low frequencies are enhanced by adding the low fre-
quencies of other channels to the subwoofer channel or
adding the low frequencies of the subwoofer to other
channels depending on the speaker setup.
When no center speaker is connected.
"CNTR LRG" cannot be selected when the front
*
speakers have been set to "FRNT NML".
1 "REMIX ON": Subwoofer re-mix setting mode to the
receiver is ON.
9 Press the SETUP key to accept the setting.
÷
The surround speaker setting indication "SURR" appears.
2 "REMIX OFF": Subwoofer re-mix setting mode to the
receiver is OFF.
÷
If subwoofer is turned "SUBW OFF", subwoofer re-mix
setting is not visible.
0 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select the appropriate sur-
round speaker setting.
% Press the SETUP key to accept the setting.
1 "SURR LRG":
*
Large surround speakers are connected to the receiver.
2 "SURR NML":
Average size surround speakers are connected to the
receiver.
3 "SURR OFF" :
When no surround speakers are connected.
"SURR LRG" cannot be selected when the center
*
speaker have been set to "CNTR NML" or "CNTR OFF".
÷
When "SURR OFF" is selected and the selection is estab-
lished by pressing the SETUP in step! below, the procedure
jumps to step $. However, if the subwoofer setting is
"SUBW OFF", you can complete the speaker setup and
proceed to the speaker volume level adjustment in step 5.
! Press the SETUP key to accept the setting.
The surround back speaker setting indication "BS" appears.
÷
Continued to next page
EN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for playback
5Adjust the speaker volume level.
6Input the distance to the speakers.
From your usual listening position, adjust the volume levels. The volume
levels from each speaker should be the same.
This setting allows the signals output from different speakers to reach
the listening position simultaneously.
÷ In steps 5, indications appear only for the selected channels of the
speakers that require adjusting.
÷ In steps 6, indications appear only for the selected channels of the
speakers that require adjusting.
1 Press the SETUP key to begin TEST TONE.
Measure the distance from the listening position to each
of the speakers.
2 Use the MULTI CONTROL button (or the MULTI
CONTROL%/fi keys)toselect "AUTO"or"MANUAL".
1 "AUTO": Select this setting to adjust the speaker volume
levels using the test tone. The test tone will be output from
every speaker channel in automatic sequence.
Jot down the distance to each of the speakers.
Distance to Front speaker (L)
:
:
:
:
:
:
:
____ feet (meters)
____ feet (meters)
____ feet (meters)
____ feet (meters)
____ feet (meters)
____ feet (meters)
____ feet (meters)
Distance to Center speaker (C)
Distance to Front speaker (R)
2 "MANUAL":Selectthissettingtoselectthespeakerchan-
nel to output the test tone using the SETUP key.
Distance to Surround speaker (RS)
Distance to Surround back speaker (RB)
Distance to Surround back speaker (LB)
Distance to Surround speaker (LS)
Press the SETUP key again select either "AUTO" or
"MANUAL".
1 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select "DISTANCE" on
setup displays, and press the SETUP key.
Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to adjust the volume level of
the test tone output from the speaker channel to
be adjusted.
2 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to adjust the distance to the
front speakers.
For "AUTO" selection, the first test tone is heard from
the front left speaker for 2 seconds. The next test tone
is heard from the speakers in the following sequence
for 2 seconds each.
The speaker indicator to be adjusted blinks.
÷
The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
The channel indication blinks while the test tone is being output.
Indication in feet
Indication in meters
3 Press the SETUP key to accept the setting.
4 Repeatsteps2 and3 toinputthedistanceforeachof
the speakers.
÷
÷
If you change the volume level settings for the speakers
while listening to music, the settings referred to on this
page are also changed.
¤
When a speaker setup is set to off the volume level for
the corresponding speakers is reset to 0 dB.
For "MANUAL" selection, press the SETUP key each
time to select the speaker channel, and usetheMULTI
CONTROLbutton(or the MULTI CONTROL %/fi keys)
to adjust the volume level.
3 Press the SETUP key to accept the setting.
÷
The test tone is turned off. This model enters the mode
for inputting the distance to the speakers.
Continued to next page
EN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for playback
7Adjust the LFE LEVEL (Low Frequency Effects level)
Input level adjustment (analog sources only)
Adjust the level of the low-frequency fields effect (LFE) signal, which is
the signal used exclusively for giving the field effect of bass tone, in the
Dolby Digital or DTS signal.
If the input level of an analog source signal is too high, the "CLIP" indicator
will lights up. Adjust the input level.
1 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select "LFE LEVEL" on
setup displays, and press the SETUP key.
1 Press the SOUND key repeatedly until the "INPUT"
indication appears.
2 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to adjust the LFE LEVEL.
2 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to adjust the input level.
÷
The LFE LEVEL is adjusted from 0dB to -10dB in 1dB
step decrements.
÷ The adjustment mode is displayed for approximately 20
seconds.
3 Press the SETUP key to accept the setting.
÷ The input level may be adjusted to any one of three settings:
0dB, -3dB, and -6dB. (The initial setting is 0dB.)
÷ You can store a separate input level for each input selector.
4 Setup is complete when the EXIT indication appears.
3 Press the SOUND key again to return to the input
indication.
5 Press the SETUP key to exit the SETUP mode.
EN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
Some preparatory steps are needed before starting playback.
Listening to a source component
RECEIVER
Input selector keys
INPUT MODE
VOLUME %/fi
INPUT SELECTOR
F.AUX MODE
INPUT SELECTOR
ON/STANDBY
VOLUME CONTROL
INPUT MODE
1Press the INPUT SELECTOR key (or the input selector keys:
TUNER, VIDEO, DVD, AUX, GAME/F.AUX)toselectthesource
you want to listen to.
Turning on the receiver
1 Turn on the power to the related components.
2 Turn on the power to this receiver by pressing the
ON/STANDBY key (or RECEIVER key).
1 Tuner (FM/AM broadcast reception)
2 "VIDEO"
3 "DVD"
4 "AUX"
5 "GAME" (or "FRONT AUX")
Selecting the input mode
2Start playback from the selected source.
If you have selected a component connected to the COAXIAL DVD,
OPT. VIDEO or DIGITAL IN (OPTICAL) jacks, make sure that the input
3Use the VOLUME CONTROL knob (or the VOLUME %/fi keys)
mode setting is correct for the type of audio signal to be used.
7
to adjust the volume.
Set up the GAME/FRONT AUX jacks on the front panel
Perform the setup for convenience of playing a video game using the
receiver.
1 Use the INPUT SELECTOR key (or the GAME/ F.AUX key)
to select "GAME" (or "FRONT AUX").
2 Press the F.AUX MODE key for the following selections:
1 "GAME":
When the connected game player is turned ON, the input
selector is switched automatically to "GAME". In addition, the
ACTIVE EQ function is switched to "EQ GAME" and the listen
mode is switched to the appropriate mode for games.
2 "FRONT AUX":
The game mode is switched OFF.
÷ The game mode is not activated if no video signal is input to the VIDEO
jack in the GAME/FRONT AUX jack section.
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
Adjusting the sound
One-touch low frequency emphasis (Bass Boost)
(PCM stereo and analog stereo mode only)
ACTIVE EQ
TONE
MULTI CONTROL %/fi
You can adjust the sound quality when this model is in the PCM stereo
and analog stereo modes.
VOLUME %/fi
MUTE ™
BASS BOOST
LOUDNESS
ACTIVE EQ
"LOUDNESS"
indicator
Press the BASS BOOST key.
÷ Press the key once to select the maximum (+10) low fre-
quency emphasis setting.
÷ TONE mode will automatically be turned ON.
÷ The BASS BOOST key is defeated during tone adjustment in
the SOUND mode (¤,‹) or when the listen mode is
switched to a mode other than the stereo mode.
MULTI CONTROL @/#
VOLUME CONTROL
PHONES ™
Switching back to the previous setting
Adjusting the TONE (PCM stereo and analog stereo mode only)
Press the BASS BOOST key again.
1 Press the TONE key to select the TONE mode.
Adjusting the LOUDNESS mode
(PCM stereo and analog stereo mode only)
2 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys)toselect"TONEON"or"TONEOFF".
Lights up
You can adjust the Loudness function which controls the low volume
settings to maintain the music's richness.
Press the LOUDNESS key to turn the LOUDNESS
setting ON.
3 Whenin"TONEON"selection, presstheTONEkeyforthe
following displays.
To cancel
1 "BASS" :
Pressthe LOUDNESS keyagainsothatthe"LOUDNESS"
Select this to adjust the low frequency range.
2 "TREBLE" :
indicator goes off.
Select this to adjust the high frequency range.
4 Use the MULTI CONTROL button (or the MULTI
ACTIVE EQ mode
CONTROL %/fi keys) to adjust the sound quality.
You can enjoy a more impressive sound effect when ACTIVE EQ
is turned ON.
Press the ACTIVE EQ key for the following selections:
1 "EQ
": (The "ACTIVE EQ" indicator lights up)
MUSIC
5 Repeat steps 3 and 4 as required.
÷ The bass and treble levels are adjustable from -10 to +10 in
2 step increments.
Effective when listening to music.
2 "EQ CINEMA": (The "ACTIVE EQ" indicator lights up)
Effective when watching a movie.
÷ The adjustment item is displayed for approximately 20 seconds.
3 "EQ GAME": (The "ACTIVE EQ" indicator lights up)
Effective when playing a game.
6 PresstheTONEkeyagaintoreturntotheinputindication.
÷ The TONE key is defeated during tone adjustment in the
SOUND mode (¤,‹),ACTIVE EQ mode or when the
listen mode is switched to a mode other than the stereo
mode.
4 "EQ OFF": (The "ACTIVE EQ" indicator goes off)
The ACTIVE EQ function is turned OFF.
÷ ACTIVE EQ function will not be available when REC MODE,
AUTO TUNING or PRESET MEMORY is ON and during 96kHz
LPCM playback.
EN
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
Muting the sound
The MUTE key lets you mute the sound of the speakers or headphones.
Press the MUTE key.
Blinks
To cancel
Press the MUTE key again so that the "MUTE" indicator
goes off.
÷ MUTE ON can also be deactivated by turning the VOLUME
CONTROL knob or pressing the VOLUME %/fi keys.
Listening with headphones
1 Connect headphones to the PHONES jack.
2 Use the VOLUME CONTROL knob (or the VOLUME %/fi
keys) to adjust the volume.
EN
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Analog sources
For AUTO REC mode :
INPUT SELECTOR
↓
1 Use the INPUT SELECTOR key (or the input selector key)
to select the source (other than "VIDEO") you want to
record.
The display switches automatically.
2 Put the component connected to the VIDEO jacks to the
For MANUAL REC mode :
record-pause mode.
3 Start playback, then start recording.
÷ Recording may not be normal for some video software. This
is due to the copy guard condition.
↓
Digital sources
Switch on the REC mode to record a digital input source.
WhenthedigitalinputsourcechangesduringrecordingintheRECmode,
the audio signal may be interrupted momentarily.
The display switches automatically.
4 Start playback, then start recording.
Recording music in REC mode
÷ If the audio reproduction stops in the middle due to change in the
input signals, etc., press the F.AUX MODE key.
When a multi-channel source such as the Dolby Digital or DTS input
signal is recorded in REC mode, the multi channel signal in the current
surround mode can be recorded down-mixed to 2-channel.
F.AUX MODE
INPUT SELECTOR
1 Use the INPUT SELECTOR key (or the input selector
keys) to select the source ("DVD", "VIDEO", "GAME" (or
"FRONT AUX")) you want to record.
2 Put the component connected to the VIDEO jacks to the
record-pause mode.
3 Press and hold the F.AUX MODE key for more than 2
seconds to select the AUTO REC or MANUAL REC mode.
1 REC mode off
2 "A-REC":
Multi-channel digital signals
AUTO REC mode
(DTS or Dolby Digital) are
down-mixed to 2-channel
before being output from
the analog recording (REC
OUT) jacks.
3 "M-REC":
MANUAL REC mode
EN
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
Thereceivercanstoreupto40stationsinthememoryandrecallthembyone-touchoperation. RadiostationscanbeclassifiedintoRDS(RadioDataSystem)stations
and other stations. To listen to or store RDS stations in the preset memory see "Using RDS (Radio Data System) (For Europe and Australia)".
§
Tuning (non-RDS) radio stations
Presetting radio stations
INPUT SELECTOR
TUNER
BAND AUTO/MONO
MULTI CONTROL %/fi
BAND
AUTO/MONO
TUNING 1/¡
INPUT SELECTOR
BAND AUTO/MONO
MULTI CONTROL @/#
MEMORY
Collective presetting of stations
MULTI CONTROL @/#
(Except for Europe and Australia)
1Use the INPUT SELECTOR key (or the TUNER key) to select
the tuner.
1Use the INPUT SELECTOR key (or the TUNER key) to select
the tuner.
2Use the BAND key to select he broadcast band to "FM".
3Press and hold the MEMORY key for more than 2 seconds.
2Use the BAND key to select the desired broadcast band.
Each press switches the band.
The "AUTO" display and "PRESET" display appear alternately.
3UsetheAUTO/MONOkeytoselectthedesiredtuningmethod.
Each press switches the tuning method to either auto or manual tuning.
1 Auto tuning:
÷ A maximum of 40 stations of the band presently being
received will be preset.
÷ Use the Manual Preset function if a desired FM station
The "AUTO" indicator lights up.
2 Manual tuning:
cannot be preset using the Auto Preset function or when it
is required to preset AM stations.
The "AUTO" indicator goes off.
"AUTO" indicator lights up in the display.
Presetting radio stations manually
1Tune to the station you want to store.
2Press the MEMORY key while receiving the station.
÷
Normally, set to "AUTO" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4Use the MULTI CONTROL button (or the MULTI CONTROL %/
fikeys, TUNING 1/ ¡keys) to select the station.
"TUNED" indicator is displayed when a
station is received. "ST." indicator lights
when a broadcast is being received in
stereo.
Proceed to step 3 within 20 seconds. (If more than 20
seconds elapse, press the MEMORY key again).
Auto tuning :
The next station is tuned automatically.
Manual tuning :
Use the MULTI CONTROL button (or the MULTI CONTROL %/fi
3Use the MULTI CONTROL button (or the MULTI CONTROL %/
fikeys) to select one of the station presets (1 – 40).
4Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3 and 4 to store as many stations as
necessary.
keys) to select the desired station.
• If you store a station at a previously used preset, the old
station will be replaced by the new one.
EN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
Receiving preset stations
Receiving preset stations in order (P.CALL)
TUNER
TUNER
Numeric keys
P.CALL 4/¢
INPUT SELECTOR
INPUT SELECTOR
1Use the INPUT SELECTOR key (or the TUNER key) to select
tune as the source.
1Use the INPUT SELECTOR key (or the TUNER key) to select
tune as the source.
2Enter the number of the preset station you want to
2Use the P.CALL 4/ ¢keys to select the desired station.
• Each time you press the key, another preset station is received in
order.
receive (up to "40").
Press the numeric keys in the following order:
For "15", press 0,5
Pressing the P.CALL ¢key does the following:
For "20", press 0,0,)
• If you make a mistake entering a two digit number, press the +10
Pressing the P.CALL 4key does the following:
key repeatedly to return to the original display and start again.
Holding down the P.CALL ¢or 4key, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
EN
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using RDS (Radio Data System) (For Europe and Australia)
2Use the BAND key to select the broadcast band to "FM".
3Press the MEMORY key continuously for more than 2 sec-
Before using a function utilizing the RDS, be sure to perform the RDS
Auto Memory operation by referring to the description in "Presetting
RDS stations (RDS AUTO MEMORY)".
onds will start AUTO MEMORY.
RDS is a system that transmits useful information (in the form of digital
data) for FM broadcasts along with the broadcast signal. Tuners and
receivers designed for RDS reception can extract the information from
the broadcast signal for use with various functions, such as automatic
display of the station name.
The "AUTO" display and "MEMORY" display appear alternately.
RDS functions:
PTY (Program TYpe Identification) Search
• After a few minutes, up to 40 RDS stations are preset in
order from channel "01".
¶
• Stations already stored in the preset memory may be replaced by
RDSstations. (i.e., IftheRDSAUTOMEMORYfunctiondetects15
RDS stations, the stations currently preset at numbers 01~15 will
be replaced by the RDS stations.)
Automatically tunes to a station that is currently broadcasting the
specified program type (genre).
PS (Program Service Name) Display
Automatically displays the station name transmitted by the RDS
station.
Using the RDS DISP. (Display) key
RDS AUTO MEMORY function
Automatically selects and stores up to 40 RDS stations in the preset
memory.
TUNER
If fewer than 40 RDS stations have been stored in the preset memory,
regular FM stations will be stored in the remaining places.
Radio Text function
Displays the radio text data transmitted by some RDS stations when
you press the RDS DISP. (display) key. There is "NO RT" if no text data
is transmitted.
RDS DISP.
The "RDS" indicator lights up when an RDS broadcast (signal) is
received.
Pressing the RDS DISP. key changes the contents of the display.
Each press switches the display mode as follows :
1 PS (Program Service name) display
2 RT (Radio Text) display
Note
3 Frequency display
Some functions and function names may differ for certain countries
and areas.
1 PS (Program Service name) display :
The station name is displayed automatically when an RDS
broadcast is received.
If no PS data was sent, "NO PS" is displayed.
Presetting RDS stations (RDS AUTO MEMORY)
This function automatically stores up to 40 RDS stations in the preset
memory. In order to use the PTY function, the RDS stations must be
stored in the preset memory using the RDS Auto Memory function.
2 RT (Radio Text) display :
Text data accompanying the RDS broadcast scrolls across the
display. "NO RT" or "RT
----" is displayed if the current RDS
TUNER
station does not provide RT data.
MEMORY
INPUT SELECTOR
3 Frequency display :
Displays the frequency of the current station.
1Use the INPUT SELECTOR key (or the TUNER key) to select
tuner as the source.
EN
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using RDS (Radio Data System) (For Europe and Australia)
3Press the PTY key to start searching.
Tuning by Program TYpe (PTY search)
Example: Searching for a Pop Music broadcast.
This function lets you set the tuner to automatically search for stations
which are currently broadcasting the type of program (genre) you want
to listen to.
Display while searching.
Blinks
Under certain receiving conditions, it may take more than 1
minute to complete the search.
Program type name display
Goes out
Display when a station is received.
MULTI CONTROL %/fi
BAND
PTY
Station name display
• No sound is heard while "PTY" is blinking.
Preparations
• Execute the RDS auto memory procedure.
• If the desired program type cannot be found, "NO PROG" is
displayed, then after several seconds the display returns to the
original display.
• Set the broadcast band to FM.
To select another program type.
Repeat steps 1, 2 and 3.
1Press the PTY key to activate the PTY search mode.
Lights up
When an RDS broadcast is received, the program type is shown on the
display. If no PTY data is available, or if the station is not an RDS
station, "NONE" is displayed.
2While the "PTY" indicator is lit, use the MULTI CONTROL
button (or the MULTI CONTROL % / fi keys) to select the
program type of your choice.
Program type table
Program Type Name Display
Program Type Name Display
Pop Music
Rock Music
Easy Listening Music
Light Classical Music
Serious Classical Music CLASSICS
POP M
Weather
Finance
WEATHER
FINANCE
ROCK M
EASY M
LIGHT M
Children’s Programmes CHILDREN
Social Affairs
Religion
Phone In
Travel
SOCIAL
RELIGION
PHONE IN
TRAVEL
Other Music
News
OTHER M
NEWS
Current Affairs
Information
Sport
Education
Drama
Culture
Science
Varied Speech
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
Leisure
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
FOLK M
DOCUMENT
EN
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
This receiver is equipped with listening modes that allow you to enjoy an
enhanced sonic ambience with a variety of video sources.
Dolby PRO LOGIC IIx/ Dolby PRO LOGIC II
Dolby Pro Logic IIx was designed specifically to provide a new sense
of spatiality, directionality and articulation of sounds from Dolby
Surround encoded sources.
In order to obtain the optimum effect from the surround modes, make
sure to input the proper speaker settings beforehand.
^
Thisisachievedwithanintelligent,built-infeedbacklogicdesign,amatrix
surround decoding and the decoding of stereo, full bandwidth surround
outputs. The PRO LOGIC IIx modes programmed into this receiver are
Surround modes
"MOVIE","MUSIC"and"GAME".The"MOVIE"modeofthePROLOGIC IIx
has preset characteristics to produce a calibrated, high-level surround
sound playback while the "MUSIC" mode has user-adjustable character-
isticstoofferthethreeoptionalcontrols,like"Dimension","CenterWidth"
and "Panorama" modes to allow optimization of the soundfields as
desired. The "Dimension" control allows the user to gradually adjust the
soundfield either towards the front or towards the rear; the "Center
Width" control allows various adjustment of the left-center-right speak-
ers’ balance; the "Panorama" mode extends the front stereo image to
include the surround speakers for an exciting "wraparound" effect with
R
L
(Front speakers)
(Center speaker)
C
SW
(Subwoofer)
RS (Surround speakers)
LS
LB
side wall imaging. The "GAME" mode is designed for playing video
games and enhances the powerful feeling of sound.
RB
(Surround back speakers)
Dolby
C
L
R
PRO LOGIC IIx
SW
LB
Dolby Digital EX
LS
RS
Dolby Digital EX is an extension of Dolby Digital technology, Dolby
Digital EX creates six full-bandwidth output channels from 6.1-chan-
nel sources. This is done using a matrix decoder that derives three
surround channels from the two in the original recording.
This is achieved by using three different surround signals, Left
Surround, Right Surround, and Back Surround, each driving its own
array of speakers. Think of it as adding a center channel for the rear
speakers, which give more diffuse and natural surround effect, even
if you wanted the ability to completely encircle the audience with
sound, positioning sound effects exactly where they would be heard
in real life.
RB
Dolby
C
L
R
PRO LOGIC II
SW
LS
RS
Note
For best results, Dolby Digital EX should be used with movie
soundtracks recorded with Dolby Digital Surround EX which contain
a digital flag that will automatically activate this feature. However, for
titles released prior to late 2001, this feature has to be activated
manually.
Dolby Digital
Dolby Digital surround format lets you enjoy up to 5.1 channels of
digital surround sound from Dolby Digital program sources (such as
Laserdisc or DVD software marked
). Compared with previous
This model lets you enjoy Dolby Digital (and Dolby Surround) program
sources, even if you connect only the Front Speakers. However, in
order to enjoy the benefit of true 6.1 channel Dolby Digital Surround
EX sound, KENWOOD recommends that you connect a full set of
speakers.
Dolby surround, Dolby Digital provides even better sound quality,
greater spatial accuracy, and improved dynamic range.
This model lets you enjoy Dolby Digital (and Dolby Surround) program
sources, even if you connect only the Front Speakers. However, in
order to enjoy the benefit of true 5.1 channel Dolby Digital surround
sound, KENWOOD recommends that you connect a full set of
speakers.
C
L
R
SW
LB
C
LS
RS
L
R
SW
RB
LS
RS
EN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
DTS-ES
DSP mode
The DTS-ES (Digital Theater System-Extended Surround) represents
6.1-channel Discrete Surround format, expanding upon 5.1 surround.
DTS-ES format is a 6.1 channel sound system for movie theaters that
includes an additional surround center channel matrixed within sur-
round left and surround right. It’s compatible on predecessor DTS 5.1
system. The extra channel allows more accurate placement and
steering of sound across the rear soundstage. The DTS-ES receiver
will be required, to experience a discrete 6.1-channel mix.
The DTS-ES decoders used in home cinema systems have decoding
options for utilizing the extra channel, in addition to processing
existing 5.1 channel surround sound :
The DSP mode lets you add the atmosphere of a live concert or hall
to almost any type of program source. These modes are particularly
effectivewhenusedwithstereoprogramsources, likeCD, television,
and FM radio. You might enjoy trying the ARENA, JAZZ CLUB,
THEATER, STADIUM or DISCO mode the next time you watch a
concert or sporting event!
C
L
R
SW
DTS-ES Discrete 6.1 and DTS-ES Matrix 6.1 add the surround back
channel audio to the DTS 5.1-channel format to improve the acoustic
positioning and makes acoustic image movement more natural with
LS
RS
the 6.1-channel reproduction.
C
What's DSP?
L
R
SW
LB
DSP stands for Digital Signal Processor.
The way a sound is heard in an actual environment depends on a
varietyofdifferentfactors. Oneofthemostimportantisreverberation
(the act of decaying elements of sound echoing in various places).
The DSP modes produce the feeling of presence by using the DSP
to create reverberation, without spoiling the sound quality of the
original signal.
LS
RS
RB
NEO:6
NEO:6 is a new technology which decodes 2-channel signals into 6-
channel signals using high-accuracy digital matrix technology. For the
best results, DTS-ES should be used with movie sound tracks re-
corded with DTS-ES format which contain a digital flag that will
automatically activate this feature. However, for some titles, this
feature has to be activated manually.
According to the signals to be played back, DTS NEO:6 uses either the
NEO:CINEMAmodeoptimizedformovieplaybackortheNEO:MUSIC
mode optimized for music playback.
C
L
R
SW
LB
LS
RS
RB
DTS
The DTS employs a larger amount of data than Dolby Digital to play
surround sound with higher quality. The DTS can be used with DVD
and LaserDisc software carrying the
mark. Although the number
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro
Logic”, “Surround EX” and the double-D symbol are trademarks of
Dolby Laboratories.
of channels is 5.1 and identical to Dolby Digital, the DTS format
features lower audio compression rate in digital recording, which
enables audio with more profoundness and higher S/N. The wider
dynamic range and better channel separation also contribute to make
the surround sound more precise and larger in scale.
“DTS”, “DTS-ES Extended Surround” and
“Neo:6” are trademarks of Digital Theater
Systems, Inc.
C
L
R
SW
LS
RS
LFE = Low Frequency Effects. This channel delivers separate non-
directional bass signals to the subwoofer for more dynamic deep bass
sound effects.
When there is a LFE channel input in the DOLBY DIGITAL or DTS
format, the "LFE" indicator lights on the display of the receiver.
EN
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Surround play
Listen modes available with Dolby Digital EX or Dolby Digital
playback: ("Dolby D" indicator lights up)
The desired listen mode can be selected according to the input signal.
Main example of medium:
Multi-channel digital source such as DVD.
Input selector keys
LISTEN MODE
1 "DOLBY D":
DOLBY DIGITAL surround
2 "DOLBY D EX":
"Dolby D" indicator
DOLBY DIGITAL EX surround *
3 "DOLBY D + PLIIx MOVIE":
DOLBY DIGITAL surround +
DOLBY PRO LOGIC IIx surround MOVIE mode *
4 "DOLBY D + PLIIx MUSIC":
DOLBY DIGITAL surround +
DOLBY PRO LOGIC IIx surround MUSIC mode *
5 "STEREO":
INPUT SELECTOR
"DTS" indicator
LISTEN MODE
Preparations
Stereo playback
÷ Turn ON related components.
÷ Complete "Preparing for playback" (speaker settings).
^
* When the speaker setting is set to "BS OFF", the DOLBY DIGITAL EX
÷ Use the INPUT SELECTOR key (or Input Selector keys) to select
the component you wish to play back with surround sound.
÷ Use the INPUT MODE key to select the input mode (analog or
and DOLBY DIGITAL + DOLBY PRO LOGIC IIx listen modes cannot be
selected.
÷ You can also adjust the midnight mode as desired.
‹
digital) for the source you wish to playback.
7
÷ Noise will be produced when a DTS source is played by selecting
Listen modes available with DTS or DTS-ES (Matrix or
Discrete) playback: ("DTS" indicator lights up)
Main example of medium:
the analog input.
1Start playing the video software.
Multi-channel digital source such as DVD.
2Press the LISTEN MODE key to select the listening mode.
The listening mode settings are stored separately for each input
selector.
1 "DTS":
DTS surround
If the input mode is set to full auto ("AUTO DETECT" lights), this
model selects the optimal listening mode automatically based on the
type of input signal and the speaker settings.
2 "DTS + NEO6 CINEMA":
DTS surround + DTS NEO:6 surround CINEMA mode *
3 "DTS-ES MATRIX 6.1":
DTS-ES 6.1-channel Matrix surround *
4 "DTS-ES DISCRETE 6.1":
DTS-ES 6.1-channel Discrete surround *
5 "STEREO":
Each press the LISTEN MODE key switches the setting as
listed.
The listening mode settings are different depending on
the type of input signal or speaker settings.
Stereo playback
* When the speaker setting is set to "BS OFF", the DTS + NEO:6 CINEMA,
DTS-ES 6.1-channel Matrix and DTS-ES 6.1-channel Discrete listen
modes cannot be selected.
÷ You can also adjust the midnight mode as desired.
‹
Continued to next page
EN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Dolby Digital Surround EX compliant disc :
Listen modes available with analog or PCM playback:
Dolby Digital Surround EX compliant disc contains identification signals.
WhenyouchooseFULLAUTOduring"Inputmodesettings"(7), this
amplifier detects the identification signals and change the LISTEN mode
to the DOLBY DIGITAL EX (Dolby Digital Surround EX mode) automati-
cally. But sometimes we find some discs which are Dolby Digital
Surround EX compliant disc but it does not contain the identification
signals. If you find the notice like “Surround EX” on the label of disc or
package, you can choose DOLBY DIGITAL EX, then you can enjoy Dolby
Digital Surround EX sound.
Main example of medium:
Digital sources including DVD linear PCM and CD.
Analog source such as VCR or radio broadcasting.
1 "PL IIx MOVIE":
DOLBY PRO LOGIC IIx surround MOVIE mode *1
2 "PL IIx MUSIC":
DOLBY PRO LOGIC IIx surround MUSIC mode *1 *2
3 "PL IIx GAME":
DOLBY PRO LOGIC IIx surround GAME mode *1
4 "PL II MOVIE":
DOLBY PRO LOGIC II surround MOVIE mode
5 "PL II MUSIC":
DOLBY PRO LOGIC II surround MUSIC mode *2
6 "PL II GAME":
DOLBY PRO LOGIC II surround GAME mode
7 "PRO LOGIC":
DOLBY PRO LOGIC surround
8 "NEO6 CINEMA":
DTS NEO:6 surround CINEMA mode
9 "NEO6 MUSIC":
DTS NEO:6 surround MUSIC mode
0 "ARENA":
DSP surround ARENA mode
- "JAZZ CLUB":
DSP surround JAZZ CLUB mode
= "THEATER":
DSP surround THEATER mode
~ "STADIUM":
DSP surround STADIUM mode
! "DISCO":
DSP surround DISCO mode
@ "STEREO":
Stereo playback.
*1 When the speaker setting is set to "BS OFF", the DOLBY PRO
LOGIC IIx listen modes cannot be selected.
*2 The sound field can be adjusted as desired using the PANORAMA,
DIMENSION and CENTER WIDTH modes. ¤‹
÷ The listen mode is fixed to stereo when the 96 kHz linear PCM signal
is input.
3Adjust the volume.
Notes
÷ Certain modes may be unavailable depending on the type of input signal
or speaker setting.
÷ If an optimum surround effect cannot be obtained or the desired mode
cannot be selected, check the speaker and input mode set-
tings. 7^
EN
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient functions
You can make further adjustments to the sound while listening to
playback in the surround mode.
Panorama mode
(Only when the input signal is a 2-channel signal in the DOLBY
PRO LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode)
When listening to music, you will be able to enjoy the "wraparound"
sound effect when you adjust the panorama mode.
SLEEP ‹
DIMMER ‹
1 Press the SOUND key repeatedly until the "PANORAMA"
indication appears.
SOUND
MULTI CONTROL %/fi
2 UsetheMULTICONTROLbutton(ortheMULTICONTROL
% / fi keys) to select PANORAMA mode "ON" or "OFF".
SOUND
INPUT SELECTOR
MULTI
CONTROL @/#
Adjusting the SOUND
Dimension mode
(Only when the input signal is a 2-channel signal in the DOLBY PRO
LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode)
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the
dimension mode.
1 Press the SOUND key until the desired item appears in
the display.
Each time you press the button, the menu changes as follows:
Note that some items are not displayed depending on speaker
settings and listening mode.
1 Press the SOUND key repeatedly until the "DIMENSION"
indication appears.
1 "C": *1
Center speaker level adjustment
2 "RS":*1
Right surround speaker level adjustment
3 "RB": *1
Surround back right speaker level adjustment
4 "LB": *1
2 Use the MULTI CONTROL button (or the MULTI CONTROL
%/fi keys) to adjust the soundfield towards the rear or
the front.
Soundfield is adjusted towards the front.
Surround back left speaker level adjustment
5 "LS": *1
Left surround speaker level adjustment
6 "SW": *1
Subwoofer level adjustment
7 "INPUT": (Analog mode only)
Input level adjustment
8 "NIGHT": *2
(
‹
↓
Standard setting.
Midnight mode adjustment
9 "PANORAMA": *3
Panorama mode ON/OFF
0 "DIMENSION": *3
Dimension adjustment
- "CENTER WIDTH": *3
Center width adjustment
‹
↓
Soundfield is adjusted towards the rear.
*1 The setting in the SOUND mode is temporary. It returns
automatically to the original level set in "Speaker settings"
when the receiver is turned OFF/ON.
*2 DOLBY DIGITAL, DTS mode only
^
*3 Only when the input signal is a 2-channel signal in the DOLBY
PRO LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode.
2 UsetheMULTICONTROLbutton(ortheMULTICONTROL
%/fi keys) to adjust the setting as desired.
÷ The adjustment item is displayed for approximately 20 seconds.
3 PresstheSOUNDkeytoadvancetothenextsettingitem.
EN
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient functions
Center Width mode
Display dimmer adjustment
(Only when the input signal is a 2-channel signal in the DOLBY PRO
LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode)
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
Center width adjustment allows you to enjoy an enhanced sound when
listening to music through center image from only center speaker, or left
and right speakers or various combinations adjustments.
1 If you want to use the remote control unit, press the
TUNER, VIDEO, AUX or GAME/F.AUX key on the remote
to set it to the receiver control mode.
1 Press the SOUND key repeatedly until the "CENTER
WIDTH" indication appears.
÷ When the center speaker is switched OFF, "CENTER WIDTH"
cannot be selected.
2 Each time you press the DIMMER key, the display’s
brightness changes among the three available settings.
Select the brightness level you find most pleasing.
2 UsetheMULTICONTROLbutton(ortheMULTICONTROL
1 Bright
2 Medium
3 Dark
%/fi keys) to adjust the left-center-right output.
Center image will be heard from center speaker only.
Sleep timer
The sleep timer function turns the receiver OFF (to the standby mode)
automatically when the set timer period has elapsed. The sleep timer
period can be set in 10-minute steps up to 90 minutes.
Center image will be heard from left and right speakers only.
Press the SLEEP key repeatedly until the desired period before
turning the receiver OFF (standby mode) is displayed.
÷ Each press increments the sleep timer period by 10 minutes.
÷ When in other position, center image from center speaker,
left and right speakers can be heard simultaneously with
various combinations.
10 = 20 = 30 ..... 70 = 80 = 90 = Cancel = 10 = 20 = ...
The sleep timer indicator lights up
Midnight mode
(DOLBY DIGITAL and DTS mode only)
When watching movies at night , you might not be able to raise the
volume as loud as normal. Midnight mode compresses the dynamic
range of previously specified parts of the DOLBY DIGITAL or DTS sound
track (like scenes with sudden increases in volume) to minimize the
difference in volume between the specified and non-specified parts. This
makes it easy to hear all of the sound track, even when listening at low
÷ Pressing the SLEEP key after the sleep timer has started
allows you to check the remaining time period.
÷ To cancel the sleep timer, turn the receiver OFF (standby
mode) or press the SLEEP key repeatedly until the sleep
timer indicator disappears.
volumes.
1 Press the SOUND key repeatedly until the "NIGHT"
indication appears.
÷ This can be selected only if DVD, VIDEO or GAME (FRONT AUX)
is selected as the source and the listen mode is set to "DOLBY
DIGITAL" or "DTS".
2 UsetheMULTICONTROLbutton(ortheMULTICONTROL
%/fi keys) to select the "NIGHT ON" or "NIGHT OFF"
setting.
1 "NIGHT ON"
2 "NIGHT OFF"
÷ The adjustment item is displayed for approximately 20 sec-
onds.
÷ Some DOLBY DIGITAL or DTS software may not be compat-
ible with the Midnight mode.
EN
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for KENWOOD DVD players
DVD player operation keys
The remote control of this unit can control KENWOOD DVD players directly without using the remote control supplied with the DVD player.
DV-4900, DV-4070B, DV-2070, DV-203, DVF-9010, DVF-K7010, DVF-5010, DVF-R9030, DVF-R7030, DVF-3530, DV-402, DV-5900, DV5700,
DVF-R9050, DVF-J6050, DV-505, DV-503, DV-502, DVF-3550, DVF-3050, DVF-R4050, DVF-605, DV-6050, DVF-R5060,
DVF-3060, DVF-3060K, DV-705, DVF-R5070 ,DVF-3070, DVF-3080, DVF-N7080, DVF-8100, DVF-3200 and DVF-3250.
How to operate the DVD player with the remote control:
1. Pressing the DVD key to turns the DVD player on or off.
2. Press the DVD key to operate the functions of the DVD players.
3. Press each key for each operation as explained in the DVD operation pages.
(To turn the receiver operation mode, press the other input selector key.)
DVD player operation keys:
You can perform these basic operations using the keys described below when connected to KENWOOD DVD player.
DVD
TUNER
VIDEO
SLEEP
DVD
DVD
AUX
RECEIVER
RECEIVER
GAME/F.AUX
INPUT MODE
SETUP
1
4
2
5
8
0
3
6
SETUP
Numeric keys/ +10
TONE
(Select tracks)
7
9
DIMMER
SOUND
+10
DIMMER
MENU
LISTEN MODE ACTIVE EQ
MULTI CONTROL
5
∞
TOP MENU
TOP MENU
MENU
VOLUME
(Title)
%(Cursor »)
fi(Cursor «)
#(Cursor \)
@(Cursor |)
ENTER
ENTER
RETURN
ON SCREEN
AUTO/MONO
7
RETURN
(3Play)
8(Pause)
ON SCREEN
7(Stop)
BAND
6
MUTE
8
6
P.CALL
TUNING
1(Search)
¡(Search)
4(Skip down)
¢ (Skip up)
4
¢
1
¡
DISC SEL.
DISC SKIP
BASS BOOST
AUDIO
LOUDNESS
SUBTITLE
DISC SEL.
ANGLE
DISC SKIP
REPEAT
AUDIO
REPEAT
ANGLE
SUBTITLE
EN
34
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Resetting the Microcomputer
Unplug the power cord from the wall outlet, then plug it back in
while holding down the ON/STANDBY key.
The microcomputer may malfunction (unit cannot be operated, or
shows an erroneous display) if the power cord is unplugged while
the power is ON, or due to some other external factor. If this
happens, execute the following procedure to reset the microcom-
puter and return the unit to its normal operating condition.
÷ Please note that resetting the microcomputer will clear the contents
of the memory and returns the unit to the state it was in when it left
the factory.
Amplifier
Symptom
Remedy
No sound from the speakers.
÷ Connect them properly referring to "Connecting the speakers".
÷ If muting is ON, release it.
0
™
÷ If headphones are connected, disconnect them.
™
7
÷ Press the INPUT MODE key to select to full auto mode.
Sound is not output from the speaker, ÷ Connect them properly referring to "Connecting the speakers".
0
^
or their sound is very small.
÷ See "Speaker settings" and check if the setting for all of the speakers is correct.
÷ Select a surround mode.
÷ Adjust the speaker levels using the test tone.
*
The standby indicator blinks and sound ÷ Speaker cords are short-circuited. Disconnect the power cord from the AC wall outlet, switch
is not output.
the receiver OFF, remove the short-circuiting and turn the receiver ON again.
Audio cannot be recorded.
÷ Connect the equipment correctly by referring to "Connecting video components, audio
components" and "Digital connections".
9
÷ If it is the digital audio that you attempt to record, set up the unit correctly by referring to
"Recording music in REC mode".
£
A video source cannot be recorded ÷ Copy-guarded video software cannot be recorded.
normally.
When playing a digital source signal, ÷ There are many possible causes for this problem, depending on the type of player used.
the sound is cut off soon after it starts.
Switch the input mode to DIGITAL MANUAL during playback of the digital source, and restart the
playback from the beginning.
7
Dolby Digital or DTS audio software ÷ Check if the digital output setting of the digital audio player is correct.
cannot be played in multi-channel
audio.
Theinputfortheunitissetautomatically ÷ The GAME mode function is activated.
)
to "GAME" when the unit is turned ON.
Tuner
Symptom
Remedy
Radio stations cannot be received.
÷ Connect an antenna properly.
#
¢
÷ Set the broadcast band properly.
÷ Tune the frequency of the desired station.
Interference.
÷ Install the outdoor antenna away from the road.
÷ Turn off the power to the appliance.
÷ Install the receiver farther away from the TV.
A station which was preset cannot be ÷ Preset a station with a receivable frequency.
received by pressing the corresponding
numeric key.
EN
35
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Remote control unit
Symptom
Remedy
Remote control operation is not ÷ Press the input selector key and select the optimum control mode.
possible.
÷ Replace with new batteries.
÷ Point the remote control unit to the remote sensor of the receiver.
÷ Connect them properly referring to "Setting up the system"
#
÷ The remote control has not been set to the operation mode for the KENWOOD DVD player you
wish to control. Press the DVD key to activate the operation mode for the KENWOOD DVD player
you want to control before operation.
›
FCC WARNING
Memory back-up function
Thisequipmentmaygenerateoruseradiofrequencyenergy.Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment
if an unauthorized change or modification is made.
If the power supply to the receiver is shut down for about a day
or more, the following settings will be reset to the initial condi-
tions. Please be careful.
÷Volume level =
-
66 dB
÷Dimmer level = OFF (Brightest condition)
÷Broadcast band = FM
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment may
cause harmful interference to radio communications, if it is not
installed and used in accordance with the instructions. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–– Reorient or relocate the receiving antenna.
÷Frequency setting = 87.50 MHz
÷Tuning mode = AUTO
÷Listen mode setting = STEREO
÷Input selector settings = TUNER
÷TONE ON/OFF = OFF
÷LOUDNESS ON/OFF = OFF
÷BASS BOOST ON/OFF = OFF
÷FRONT AUX mode = GAME
Note to CATV system installer
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the
point of cable entry as practical.
–– Increase the separation between the equipment and receiver.
–– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
–– Consult the dealer or an experienced radio / TV technician for help.
®
As an ENERGY STAR Partner, Kenwood Corpora-
tion has determined that this products meets the
®
ENERGY STAR guidelines for energy efficiency.
This product can save energy. Saving energy re-
duces air pollution and lowers utility bills.
EN
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (For U.S.A. and Canada)
AUDIO section
VIDEO section
Rated power output during STEREO operation
Input sensitivity / impedance
Composite: DVD, VIDEO, GAME (or FRONT AUX)
.................................................................................. 1 Vp-p / 75 Ω
Output level / impedance
65 watts per channel minimum RMS, both channels driven,
at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total
harmonic distortion. (FTC)
Composite: VIDEO, MONITOR OUT ..................... 1 Vp-p / 75 Ω
Effective power output during STEREO operation ...... 100 W + 100 W
(1 kHz, 10% T.H.D. at 8 Ω)
FM tuner section
Tuning frequency range.....................................87.5 MHz ~ 108 MHz
Usable sensitivity (MONO)
................... 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB)
50 dB quieting sensitivity
STEREO .............................. 28 µV (75 Ω)/ 40.2 dBf (75 kHz dev)
Total harmonic distortion (1 kHz)
MONO.......................................................... 0.5% (71.2 dBf input)
STEREO ....................................................... 0.7% (71.2 dBf input)
Signal to noise ratio (1 kHz)
MONO........................................................ 75 dB (71.2 dBf input)
STEREO ..................................................... 68 dB (71.2 dBf input)
Selectivity ( 400 kHz) ................................................................. 70 dB
Stereo separation (1 kHz) ........................................................... 40 dB
Frequency response (30 Hz ~ 15kHz) ..................... +0.5 dB, –3.0 dB
Effective power output during SURROUND operation
FRONT ....................................................................... 80 W + 80 W
......................... (1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)
FRONT ................................................................... 100 W + 100 W
(1 kHz, 10% T.H.D. at 8 Ω one channel driven)
CENTER .................................................................................. 80 W
(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)
CENTER ................................................................................ 100 W
(1 kHz, 10% T.H.D. at 8 Ω one channel driven)
SURROUND .............................................................. 80 W + 80 W
(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)
100 W + 100 W
(1 kHz, 10% T.H.D. at 8 Ω one channel driven)
Total harmonic distortion ..........................0.05% (1 kHz, 50 W, 8 Ω)
Frequency response
LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX)
...................................................20 Hz ~ 90 kHz, +0 dB ~ –3.0 dB
Signal to noise ratio (IHF' 66)
LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX) ........... 96 dB
Input sensitivity / impedance
AM tuner section
Tuning frequency range..................................... 530 kHz ~ 1,700 kHz
Usable sensitivity (30% mod, S/N 20 dB) ......... 16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz)
........................................................................ 50 dB (1 mV input)
LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX)
.............................................................................. 500 mV / 40 kΩ
Output level / impedance
REC OUT ................................................................ 500 mV / 1 kΩ
PRE OUT (SURROUND BACK) .......................... 700 mV / 2.2 kΩ
PRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩ
Tone control
GENERAL
Power consumption .................................................................. 120 W
Standby power consumption ................................................... 0.3 W
Dimensions.......................................................W: 440 mm (17-5/16")
H : 079 mm (3-1/8")
D : 357 mm (14-1/16")
Weight (Net) ..................................................................7.9 kg (17.4 lb)
BASS................................................................ 10 dB (at 100 Hz)
TREBLE ............................................................ 10 dB (at 10 kHz)
Loudness control
VOLUME at –30dB level .................................. +8 dB (at 100 Hz)
DIGITAL AUDIO section
Notes
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
1. KENWOOD follows a policy of continuous advancements in develop-
ment. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold
location (under a water-freezing temperature).
Optical: VIDEO, GAME (or FRONT AUX)
....................................... (–15 dBm ~ –21 dBm), 660 nm 30 nm
Coaxial: DVD......................................................... 0.5 Vp-p / 75 Ω
EN
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (For Europe and Australia)
AUDIO section
VIDEO section
For Europe
Input sensitivity / impedance
Rated power output during STEREO operation .......... 80 W + 80 W
DIN/IEC (1 kHz, 0.7% T.H.D. at 6 Ω )
Composite: DVD, VIDEO, GAME (or FRONT AUX)
.................................................................................. 1 Vp-p / 75 Ω
Output level / impedance
Effective power output during STEREO operation ..... 100 W + 100 W
(1 kHz, 10% T.H.D. at 6 Ω )
Composite: VIDEO, MONITOR OUT ..................... 1 Vp-p / 75 Ω
Effective power output during SURROUND operation
FRONT ....................................................................... 80 W + 80 W
......................... (1 kHz, 0.7% T.H.D. at 6 Ω one channel driven)
FRONT ................................................................... 100 W + 100 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
FM tuner section
Tuning frequency range.....................................87.5 MHz ~ 108 MHz
Usable sensitivity (DIN at 75 Ω)
MONO........................ 1.3 µV/ 13.2 dBf (40 kHz dev, S/N 26 dB)
STEREO ................ 45 µV/ 42.1 dBf (40 + 6 kHz dev, S/N 46 dB)
Total harmonic distortion (DIN at 1 kHz)
MONO.......................................................... 0.2% (71.2 dBf input)
STEREO ....................................................... 0.8% (71.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO........................................................ 65 dB (71.2 dBf input)
STEREO ..................................................... 60 dB (71.2 dBf input)
Selectivity (DIN 300 kHz) .......................................................... 64 dB
Stereo separation (1 kHz) ........................................................... 36 dB
Frequency response (30 Hz ~ 15kHz) ..................... +0.5 dB, –3.0 dB
CENTER .................................................................................. 80 W
(1 kHz, 0.7% T.H.D. at 6 Ω one channel driven)
CENTER ................................................................................ 100 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
SURROUND .............................................................. 80 W + 80 W
(1 kHz, 0.7% T.H.D. at 6 Ω one channel driven)
100 W + 100 W
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
For Australia
Rated power output during STEREO operation
65 watts per channel minimum RMS, both channels driven,
at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total
harmonic distortion. (FTC)
AM tuner section
Tuning frequency range..................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod, S/N 20 dB) ......... 16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz)
Rated power output during STEREO operation .......... 80 W + 80 W
DIN/IEC (1 kHz, 0.7% T.H.D. at 8 Ω )
Effective power output during STEREO operation ...... 100 W + 100 W
......................................................... 50 dB (60 dBµ V EMF input)
GENERAL
(1 kHz, 10% T.H.D. at 8 Ω)
Power consumption .................................................................. 150 W
Standby power consumption ................................................... 0.3 W
Dimensions.......................................................W: 440 mm (17-5/16")
H : 079 mm (3-1/8")
Effective power output during SURROUND operation
FRONT ....................................................................... 80 W + 80 W
......................... (1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)
FRONT ................................................................... 100 W + 100 W
(1 kHz, 10% T.H.D. at 8 Ω one channel driven)
D : 357 mm (14-1/16")
Weight (Net) ..................................................................7.9 kg (17.4 lb)
CENTER .................................................................................. 80 W
(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)
CENTER ................................................................................ 100 W
(1 kHz, 10% T.H.D. at 8 Ω one channel driven)
SURROUND .............................................................. 80 W + 80 W
(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)
100 W + 100 W
(1 kHz, 10% T.H.D. at 8 Ω one channel driven)
Total harmonic distortion ..........................0.05% (1 kHz, 50 W, 8 Ω)
Frequency response
LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX)
...................................................20 Hz ~ 90 kHz, +0 dB ~ –3.0 dB
Signal to noise ratio (IHF' 66)
LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX) ........... 96 dB
Input sensitivity / impedance
LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX)
.............................................................................. 500 mV / 40 kΩ
Output level / impedance
REC OUT ................................................................ 500 mV / 1 kΩ
PRE OUT (SURROUND BACK) .......................... 700 mV / 2.2 kΩ
PRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩ
Tone control
BASS................................................................ 10 dB (at 100 Hz)
TREBLE ............................................................ 10 dB (at 10 kHz)
Loudness control
VOLUME at –30dB level .................................. +8 dB (at 100 Hz)
DIGITAL AUDIO section
Notes
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
1. KENWOOD follows a policy of continuous advancements in develop-
ment. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold
location (under a water-freezing temperature).
Optical: VIDEO, GAME (or FRONT AUX)
....................................... (–15 dBm ~ –21 dBm), 660 nm 30 nm
Coaxial: DVD......................................................... 0.5 Vp-p / 75 Ω
EN
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (Except for the U.S.A., Canada, Europe and Australia)
AUDIO section
FM tuner section
Rated power output during STEREO operation
Tuning frequency range.....................................87.5 MHz ~ 108 MHz
Usable sensitivity (MONO)
................... 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB)
50 dB quieting sensitivity
STEREO .............................. 28 µV (75 Ω)/ 40.2 dBf (75 kHz dev)
Total harmonic distortion (1 kHz)
MONO.......................................................... 0.5% (71.2 dBf input)
STEREO ....................................................... 0.7% (71.2 dBf input)
Signal to noise ratio (1 kHz)
MONO........................................................ 75 dB (71.2 dBf input)
STEREO ..................................................... 68 dB (71.2 dBf input)
Selectivity ( 400 kHz) ................................................................. 70 dB
Stereo separation (1 kHz) ........................................................... 40 dB
Frequency response (30 Hz ~ 15kHz) ..................... +0.5 dB, –3.0 dB
65 watts per channel minimum RMS, both channels driven,
at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total
harmonic distortion. (FTC)
Rated power output during STEREO operation .......... 80 W + 80 W
DIN/IEC (1 kHz, 0.7% T.H.D. at 8 Ω )
Effective power output during STEREO operation ...... 100 W + 100 W
(1 kHz, 10% T.H.D. at 8 Ω)
Effective power output during SURROUND operation
FRONT ....................................................................... 80 W + 80 W
......................... (1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)
FRONT ................................................................... 100 W + 100 W
(1 kHz, 10% T.H.D. at 8 Ω one channel driven)
AM tuner section
Tuning frequency range
CENTER .................................................................................. 80 W
(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)
10 kHz step .................................................. 530 kHz ~ 1,610 kHz
9 kHz step .................................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod, S/N 20 dB) ......... 16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz)
CENTER ................................................................................ 100 W
(1 kHz, 10% T.H.D. at 8 Ω one channel driven)
SURROUND .............................................................. 80 W + 80 W
(1 kHz, 0.7% T.H.D. at 8 Ω one channel driven)
........................................................................ 50 dB (1 mV input)
100 W + 100 W
(1 kHz, 10% T.H.D. at 8 Ω one channel driven)
GENERAL
Total harmonic distortion ..........................0.05% (1 kHz, 50 W, 8 Ω)
Frequency response
LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX)
...................................................20 Hz ~ 90 kHz, +0 dB ~ –3.0 dB
Signal to noise ratio (IHF' 66)
LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX) ........... 96 dB
Input sensitivity / impedance
Power consumption .................................................................. 150 W
Standby power consumption ................................................... 0.3 W
Dimensions.......................................................W: 440 mm (17-5/16")
H : 079 mm (3-1/8")
D : 357 mm (14-1/16")
Weight (Net) ..................................................................7.9 kg (17.4 lb)
LINE: DVD, VIDEO, AUX, GAME (or FRONT AUX)
.............................................................................. 500 mV / 40 kΩ
Output level / impedance
REC OUT ................................................................ 500 mV / 1 kΩ
PRE OUT (SURROUND BACK) .......................... 700 mV / 2.2 kΩ
PRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩ
Tone control
BASS................................................................ 10 dB (at 100 Hz)
TREBLE ............................................................ 10 dB (at 10 kHz)
Loudness control
VOLUME at –30dB level .................................. +8 dB (at 100 Hz)
DIGITAL AUDIO section
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
Optical: VIDEO, GAME (or FRONT AUX)
....................................... (–15 dBm ~ –21 dBm), 660 nm 30 nm
Coaxial: DVD......................................................... 0.5 Vp-p / 75 Ω
VIDEO section
Notes
Input sensitivity / impedance
1. KENWOOD follows a policy of continuous advancements in develop-
ment. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold
location (under a water-freezing temperature).
Composite: DVD, VIDEO, GAME (or FRONT AUX)
.................................................................................. 1 Vp-p / 75 Ω
Output level / impedance
Composite: VIDEO, MONITOR OUT ..................... 1 Vp-p / 75 Ω
EN
39
Download from Www.Somanuals.com. All Manuals Search And Download.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model__________________ Serial Number________________________
Download from Www.Somanuals.com. All Manuals Search And Download.
|