MICRO HI-FI COMPONENT SYSTEM
HM-331
INSTRUCTION MANUAL
KENWOOD CORPORATION
COMPACT
DIGITAL AUDIO
TEXT
B60-4228-00 00 CH (M,T)
9809
OC
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution : Read this page carefully to ensure safe operation.
Before applying power
3
HM-331 (En/T)
Contents
Preparation section
Application section
Playback of CD................................................ 24
Before applying power ............................... 2
Safety precautions ........................................................... 2
Special features ................................................................ 4
Handling of discs .............................................................. 5
Notes on cassette tape .................................................... 5
Listening in the desired sequence
(program playback) ................................................... 24
Repeated playback ..........................................................25
Listening to an unexpected title sequence
(random playback) .....................................................26
R.D.S. (Radio Data System)
System connection........................................... 6
Connection of the System Accessories ....................... 6
Connection of Other Accessories
(Except for some areas) ........................................................ 28
(Commercially Available Parts) ............................... 8
Searching for a desired program type
Pprasection
Controls and indicators ................................... 9
Display ................................................................................ 9
Main unit........................................................................... 10
Remote control Unit .........................................................12
(PTY search) ............................................................... 29
To be able to listen to the desired information
at any time ...................................................................31
Convenient Recording Methods .................. 33
Selection of the Recording type....................................33
One-touch recording (CD=TAPE) ................................34
Program recording (CD =TAPE) .................................. 35
Operation of remote control unit ................. 13
CHANNEL SPACE setting ................................................13
Tone adjustment ............................................. 36
Tone adjustment .............................................................. 36
Balance adjustment........................................................ 36
Adjusting the AUX Input Level.......................................37
Basic section
Let's put out some sound............................... 14
Basic use method............................................................ 14
Playback of CD ................................................................ 16
In regard to CD-TEXT ...................................................... 17
Playback of tape.............................................................. 18
Receiving broadcast station ..........................................20
Clock adjustment............................................ 38
Timer operation................................................ 39
Setting the O.T.T. ...............................................................39
Setting the Program Timer ............................................ 40
Activating or deactivating the O.T.T. or
Let's recording ................................................ 22
program timer execution ......................................... 42
Sleep timer ....................................................................... 42
Recording on TAPE ..........................................................22
Knowledge section
Important Items ............................................... 43
Maintenance .....................................................................43
Reference ..........................................................................43
In case of difficulty ........................................ 44
Specifications ............................................ 47
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Before applying power
HM-331 (En/T)
Special features
CD player and auto-reverse cassette deck as standard equipment
A CD player and auto-reverse cassette deck are provided, making the unit an integrated micro stereo system for
enjoyment of multiple music sources.
Convenient Recording Methods
Various versatile recording functions are provided according to the use purposes.
÷One-touch recording : Recording of one CD or one track by pressing a single key
÷Program recording : Any desired tracks can be recorded in the desired sequence
Convenient timer functions
Two-program timer : Timer playback, timer recording and AI timer playback can be programmed.
AI timer
O.T.T.
: When the unit is turned ON by the timer, the sound level increases gradually.
: Timer with easy setting, which operates only once.
Sleep timer
: Useful when you want to go asleep while listening to music.
Prpasection
In regard to demonstration
set/demo
This unit is equipped with a demonstration function
(only display). The demonstration consists of sequen-
tial change of display and indicators showing the
operations, but the audio itself does not change. The
demonstration function can be cancelled as follows.
DEMO OFF (To cancel demonstration):
Press the “set/demo” key when DEMO is ON.
DEMO ON (To execute demonstration):
After turning power ON, press and hold the
“set/demo” key (for more than 2 seconds).
÷Even when DEMO is ON, stations with weak radio waves are muted and their sound cannot be heard.
÷This operates automatically when a power failure has occurred or the plug of the power cable has been pulled while
the power was ON. Cancellation is possible by pressing the key during the demonstration.
Unpacking
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately.
If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company
receiving the unit) can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.
Please confirm that the following accessories are present.
Accessories
FM indoor antenna (1)
Loop antenna (1)
Remote control unit (1)
Europe, and U.K. Other countries
*AC plug adaptor (1)
Batteries (R6/AA) (2)
*Use to adapt the plug on the power
cord to the shape of the wall outlet.
(Accessory only for regions where
use is necessary.)
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Before applying power
HM-331 (En/T)
Handling of discs
Disc handling precautions
Handling
Discs which can be played with this unit
CD (12 cm, 8 cm), and the audio part of CDV, CD-G, CD-EG
and CD-EXTRA.
Hold the discs so that you do not
touch the playing surface.
Use discs that comply with the IEC standard, for example
COMPACT
a disc carrying the
marking on the label surface.
DIGITAL AUDIO
Label side
Playing side
Never play a cracked or warped disc
During playback, the disc rotates at high speed in the player.
Therefore, to avoid danger, never use a cracked or deformed
disc or a disc repaired with tape or adhesive agent.
Please do not use discs which are not round because they
may cause a malfunction.
Sticker
Do not attach paper or tape to ei-
ther the playing side or the label side
of the discs.
Pprasection
Sticky paste
Disc accessories
Cleaning
The disc accessories (stabilizer, protection sheet, protec-
tion ring, etc.) which are marketed for improving the sound
quality or protecting discs as well as the disc cleaner should
not be used with this system because they may cause
malfunction.
If fingerprints or foreign matter be-
come attached to the disc, lightly
wipe the disc with a soft cotton cloth
(or similar) from the center of the disc
outwards in a radial manner.
Storage
When a disc is not to be played for
a long period of time, remove it from
the player and store it in its case.
Notes on cassette tape
Safety tab (accidental erasure prevention tab)
After an important recording has been finished, break the
safety tab, to prevent the recorded contents from being
erased or recorded on accidentally.
To store cassette tapes
Do not store the tapes in a place which is subject to
direct sunlight, or near equipment that generates heat.
Keep the cassette tapes away from any magnetic field.
ForAside
ForBside
When there is slack in the tape
Insuchacase,insertapencilintothereelholeandwind
the reel hub to remove the slack.
Apply tape only to the position where
the tab has been removed.
To re-record
1.Longer tape than 110 minutes cassette tape
Since longer tape than 110 minutes cassette tape is very thin, the tape could adhere to the pinch roller or be
easily broken. It is recommended that these tapes not be used with this unit to prevent possible damage.
2.Endless tapes
NNootteess
Do not use an endless tape, as this could damage the mechanism of the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
System connection
HM-331 (En/T)
Note on Connection
CAUTION
Connection of the System Accessories
This figure shows the method of connection be-
tween the main unit and provided accessories.
Connect the components as shown in the
diagram.
Only plug the power cord into a power outlet
once connections are completed.
Malfunction of microcomputer
AM loop antenna
If operation is not possible or erroneous display
appears even though all connections have
been made properly, reset the microcomputer
The supplied antenna is for indoor use. Place it as far as
possible from the main system, TV set, speaker cords and
power cord, and set it to a direction which provides the best
reception.
referring to “In case of difficulty”.
r
1
2
3
4
Prpasection
Speaker (right)
NNootteess
1.Never short-circuit the “+” and “-” speaker cords.
2.If the left and right speaker connections or the “+” and “-” polarity
are inverted, the sound will be unnatural with unclear positioning of
musical instruments, etc. Be sure to connect them without mistake.
3.Be sure to insert all connection cords securely. If their connections
are imperfect, the sound may not be produced or noise may
interfere.
4.Before plugging or unplugging a connection cord, be sure to unplug
the power cord from the wall AC outlet. If connection cords are
pluggedorunpluggedwiththepowercordleftpluggedin,malfunction
or damage may result.
Main Unit
1
2
3
4
Twist
Download from Www.Somanuals.com. All Manuals Search And Download.
7
System connection
HM-331 (En/T)
FM indoor antenna
The accessory antenna is for temporary indoor use only.For stable signal reception we recommend using an outdoor antenna.
Remove the indoor antenna if you connect one outdoors.
1Remove the insulation from the end of the cord end.
(Except for Europe, and U.K.)
2Connect it to the antenna terminal.
3Locate the position providing good reception condition.
Europe, and U.K.
4Fix the antenna.
FM
75Ω
Other countries
Pprasection
AM
FM
300Ω
GND
FM
75Ω
AM
GND
SPEAKERS
(6–16Ω)
ANTENNA
SPEAKERS
(
)
6–16Ω
Speaker (left)
+
FM
300Ω
L
+
L
–
FM
75Ω
–
AM
–
–
GND
R
R
+
+
DIGITAL
OUT
SUPER
WOOFER
PRE OUT
OPTICAL
MANUAL
AUTO
PANEL
OPEN/CLOSE
AUX INPUT
R
L
POWER cord
TO WALL AC
OUTLET
AC 110–120V
AC 220–240V
Speaker cord
Connect correctly + to + and - to -.
PANEL OPEN/CLOSE switch
Change the operation mode of the "REVOLVING
2
2
CONTROL PANEL".
!
Download from Www.Somanuals.com. All Manuals Search And Download.
8
System connection
HM-331 (En/T)
(Commercially Available Parts)
Connection of Other Accessories
Note on Connection
CAUTION
Connect the components as shown in the diagram.
Only plug the power cord into a power outlet once
connections are completed.
FM outdoor antenna
Lead the 75Ω coaxial cable con-
nected to the FM outdoor antenna
into the room and connect it to the
FM 75Ω terminal. Please remove the
indoor antenna after an outdoor an-
tenna has been installed.
Other countries
FM
300Ω
10mm
10mm
DIGITAL OUT jack
(OPTICAL)
FM
75Ω
AM
Prpasection
Antenna adaptor (optional)
GND
DIGITAL
OUT
OPTICAL
FM
75Ω
Optical-fiber
cable
ANTENNA
AM
Cap
FM
300Ω
Europe, and U.K.
If necessary, remove the
cap and plug the optical-
fiber cable (optional)
GND
FM
75Ω
AM
–
R
GND
+
DIGITAL
OUT
SUPER
WOOFER
PRE OUT
OPTICAL
Optical-fiber cable
MANUAL
AUTO
PANEL
OPEN/CLOSE
AUX INPUT
R
L
SUPER WOOFER
MD recorder or
DAT etc.
AC 110–120V
AC 220–240V
AUX INPUT
R
L
POWER cord
TO WALL AC OUTLET
Audio cord
NNootteess
Audio output
1.In case an associated system component is connected, also read
the instruction manual of the component.
2.Insert the optical-fiber cable straight into the connector until it clicks.
3.Besuretoattachtheprotectioncapwhentheconnectorisnotused.
4.Never band or bundle the optical-fiber cable.
VCR, Analog turntable with built-in
RIAAequalizer(optionalP-110),etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Controls and indicators
HM-331 (En/T)
(The displays given in this manual are approximations only.
They may differ from what actually appears on the display.)
Display
8
9
0
!
@
#
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
STEREO
kHz
R·D·S EON NEWS
TP TA PTY
1
2
TRACK NO.
TOTAL AUTO TUNED
FM
A
M
NR T.E.
PM
8 8 8 8 8 8 8 8
MHz
O.T.E.
TITLE SEARCH
Pprasection
• • • • • • • • • • •
MD EDIT
3
4
5 6 7
1 Tuner-related indicators
8 Indication related to CD
2 Character information display section (dot display)
Shows character information including the input selection,
volume level and disc/track title.
9 Auto Power Save indicator
0 Timer-related indicators
! RDS-related indication (expect for some areas)
@ Cassette deck, reverse mode and TAPE equalizer
(T.E.) indicators
3 Character information display section
Frequency indication, time indication, track No., program No.,
etc.
# CD play/pause indicators
4 O.T.E. (ONE TOUCH EDIT) indication
Indicates the play and pause modes of CD.
Appears during one-touch recording.
5 LOUD (Loudness) indication
6 TAPE REC indicators
7 EX.BASS (extra bass) indication
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Controls and indicators
HM-331 (En/T)
Main unit
0
push open
1
#
2
3
$
%
Prpasection
CD
TAPE
O.T.E.
4
4
TAPE rec
menu
1
1
TAPE / preset
4
5
TUNER / band
AUX
repeat
sound
set / demo
^
&
open / close
panel
6
VOLUME / multi control
*
tape
EQ.
CD
6
7
8
(
)
¡
on/standby
direction
2
2
STOP
7
TAPE
0
9
0
!
push open
Auto Reverse
phones
@
About the one-touch operation function
This unit incorporates the one-touch operation function for the user's convenience.
With this function, pressing any key enclosed in
immediately start playback (or reception).
while the unit is in standby mode
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Controls and indicators
HM-331 (En/T)
1 CD cover open key (0)
Press to open the CD player cover.
2 Display
# CD Skip (4, ¢)/TAPE (1, ¡) keys &)
During CD operation :
Press to skip tracks in the forward or backward direction.
During TUNER operation :
Press to receive a preset station.
During TAPE operation :
Press to search in the forward or backward direction.
3 Tape record key (TAPE rec)
£
Press to start recording. Pressing the key during recording
stops it after leaving a non-recorded space (blank) of about 4
seconds.
4 “set/demo” key
$ “repeat” key
Used for repeated playback of CD.
% O.T.E. key
∞
%
Press to set or enter an item selected with the “VOLUME/
multi control“.
Used for demonstration ON/OFF.
^ “sound” key
5 “menu” key
Used for switching the EX.BASS play and LOUDNESS play.
Press to switch the function of the “VOLUME/multi control
(up/down)” knob.
& “TUNER/band” key
)
The received broadcasting band is switched.
Press to select the TUNER input.
AUX input key
This key is also used when setting the time of the day.
Pprasection
6 “panel open / close” key
7 ”tape EQ” key
8 CD play/pause key (CD 6)/indicator
Press to select the CD input and start CD playback.
Press during CD playback to let it pause temporarily.
9 Tape play key (TAPE)/
TAPE direction indicator
0 Stop key (7)
! Cassette holder
Press to listen to the input source connected to AUX (analog
external).
^
* Standby / timer indicator
$
Light in standby mode of power.
Red
Orange :O.T.T. standby
:Program timer standby
:Normal standby mode
Green :Power ON mode
( “VOLUME/multi control (up/down)” knob
Normally this is used for volume adjustment.
) Remote sensor
Presstheareamarked“0pushOPEN”toloadorejectatape.
$
*
@ “phones” jack
Headphones with a stereo mini plug (optional) can be
connected.
¡ “on/standby” key
The system is switched ON and STANDBY.
* About the VOLUME/multi control (up/down) knob
Turningtheknobswitchesthefunctionasshown
in the character information display.
After selecting the function of this knob with the
“menu” key, select the desired control item by turn-
ing the “VOLUME/multi control (up/down)” knob.
To set or enter the setting of the selected item, press
the “set/demo” key.
TAPE RVS.
?
(
›
¡
O.T.E.
?
A. MEMORY (or A. PRESET) ?
(Only when the TUNER input is selected)
AUX LEVEL
(Only when the AUX input is selected)
?
‡
VOLUME / multi control
menu
BALANCE
TIMER SET
A.P.S. SET
?
?
?
fl
·
%
set/demo
÷The function of the control knob returns to the normal
mode when it has not been operated for 5 seconds.
About the REVOLVING CONTROL PANEL
AUTO
÷The REVOLVING CONTROL PANEL is closed when
the power supply is in STANDBY mode.
÷When the power is switched ON, the REVOLVING
CONTROL PANEL opens.
÷When the power is ON, the panel opens and closes
alternately each time the "panel open / close" key is
pressed.
MANUAL
÷When the power is ON, the panel opens and closes
alternately each time the "panel open / close" key
is pressed.
MANUAL
AUTO
REVOLVING CONTROL PANEL
(close state)
open / close
panel
ANTENNA
AKERS
16
Ω
)
FM
300Ω
FM
75Ω
AM
GND
+
DIGITAL
OUT
OPTICAL
SUPER
WOOFER
PRE OUT
MANUAL
AUTO
PANEL
OPEN/CLOSE
2
2
2
2
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Controls and indicators
HM-331 (En/T)
The keys on the remote control unit with the same names as on the
main unit have the same function as the keys on the main unit.
Remote control unit
5 Basic operation keys
Fast forward, fast reverse keys (1, ¡)
During CD or TAPE operation:
Press to search in the forward or backward direction.
&(
POWER
1
SLEEP
1
TONE
SOUND
2
9
0
During TUNER operation:
Press to select a radio station.
P.CALL/skip keys (4, ¢)
)
2
5
8
0
3
6
TIMER
REPEAT
RANDOM
CLEAR
4
During CD operation :
Press to skip tracks in the forward or backward direction.
&
3
7
9
During TUNER operation:
Press to select a radio station.
TAPE 2 3key
)
!
@
+10
TAPE
1
PGM
TIME DISP. DOT DISP.
O.T.E.
TUNER BAND key
4
5
6
CD 6key
¡
4P.CALL ¢
Stop key (7)
TAPE
TUNER
BAND
CD
AUX key
2 3
6
7
6 RDS-related keys (For Europe and U.K.)
TA/NEWS
SET
PTY
AUX
%
Prpasection
TA/NEWS key
Used at the time of EON reservation.
PTY key
⁄
ª
VOLUME
ENTER
MUTE
#
7
8
fi
Used at the time of program type detection.
REMOTE CONTROL UNIT
7 SET key
RC-F0503E
Press to set or enter an item selected with the “VOLUME/
multi control“.
ENTER key
¡
It is used to enter the preset station memory in the tuner.
8 MUTE key
%
This is used to suppress the sound temporarily.
9 POWER (
) key
$w
Europe, and U.K.
The system is switched ON and STANDBY.
This key is also used to activate or cancel the timer program
execution.
RC-F0503E (Infrared ray system)
Other countries
RC-F0503 (Infrared ray system)
0 TIMER key
w
Used to select the timer.
! Keys related to CD
1 TONE key
fl
%
REPEAT key
This is used for repeated playback.
RANDOM key
Playback of the CD tracks in random order.
CLEAR key
The programmed track sequence is cleared.
∞
§
¢
¢
¡
This is used to adjust the tone.
SOUND key
Used for switching the EX.BASS play and LOUDNESS play.
2 SLEEP key
This is used to set the sleep timer.
3 Numeric keys
w
PGM key
These are used to select CD tracks and as preset call keys for
the tuner.
This is used to program the track sequence.
During TUNER operation:
4 TAPE O.T.E. key
›
Used to switch the tuning mode between “AUTO” (auto
tuning, stereo reception) and Manual (manual tuning,
monaural reception).
These keys are used for recording of a CD onto tape with a
one-touch operation.
Press either key during CD playback to record the currently
playedtrackontotape. Pressinstopmodetorecordtheentire
CD onto tape.
@ TIME DISP. key
Press to switch the time information displayed during CD
playback.
DOT DISP. key
¶
Used for scroll display of the text infomations of CD-TEXT
compatible disc.
# VOLUME (%,fi) keys
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of remote control unit
13
HM-331 (En/T)
Loading batteries
1 Remove the cover.
2 Insert batteries.
3 Close the cover.
÷Insert two R6 (“AA”-size) batteries following the
polarity indications.
Pprasection
Operation
After plugging the power cord of this unit, press
the POWER ( ) key of the remote control unit to
turn the system ON. When the system is turned
ON, press the key of the function to be operated.
Operating range
(approx.)
2
2
Remote sensor
6m
30˚
30˚
÷When pressing more than one remote control keys
successively, press the keys securely by leaving an
interval of 1 second or more between keys.
1.The provided batteries are intended for use in operation checking, and their service life may be short.
2.When the remote controllable distance becomes short, replace both of the batteries with new ones.
3.If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
NNootteess
Channel space switching
1 Turn power on.
(Except for
the United Kingdom and Australia)
The space between radio channels has been set to the one that
prevails in the area to which the system is shipped. However, if the
current channel space setting does not match the setting in the area
where the system is to be used, for instance when you move from
area 1 or area 2 shown in the following table or vice versa, proper
reception of AM/FM broadcasts cannot be expected. In this case,
change the channel space setting in accordance with your area by
referring to the following table.
2 Press the TUNER/band key
3 Select the mode by using the "repeat" key.
Each press switches the space frequency alternately.
1
2
"FM 50 kHz" (FM 50 kHz, AM 9 kHz)
"FM 100 kHz" (FM 100 kHz, AM 10 kHz)
TRACK NO.
TOTAL AUTO TUNED
STEREO
FM
A
PM
M
kHz
MHz BEST HITS
CHANNEL
Area
0 2 1 1 9 0 5 0
Space Frequency
C H N S P A C E •
•
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
USA, Canada and South
American countries
1
2
Blinks.
4 Establish the selection by pressing the "set/
Other countries
demo" key.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Let's put out some sound
HM-331 (En/T)
Basic use method
Bass and treble compensation
"sound" key
2
2
2
3
1
Muting the sound temporarily
Listening through headphones
1. Set the “on/standby” key to ON (STANDBY).
Basection
on/standby
When the “on/standby” key (
the unit is switched off.
) is pressed while the unit is ON,
÷ Pressing the CD 6, AUX, TAPE or “TUNER/band” key also turns power
on and starts playback (reception) of the corresponding input. (One-touch
operation)
÷ When the CD or TAPE input is selected while the corresponding disc or tape
has been loaded, it immediately starts to play.
1
Example:
To select the CD input
2. Selecting the desired output.
Lights
TUNER (Broadcasts)
CD
TAPE
AUX (External input)
)
^
*
8
CD
6
÷ Pressing the CD 6, AUX, TAPE or
“TUNER/band” key selects the cor-
responding input.
2
VOLUME / multi control
3. Volume adjustment.
÷ Quick turning produces a larger
change amount. (Dynamic rotary vol-
ume control function)
3
The volume
increases
÷ The display shows a reference value.
The volume
decreases
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Let's put out some sound
HM-331 (En/T)
Listening through headphones
Bass and treble compensation
Insert the headphone plug into the “phones”
jack.
sound
EX.BASS
LOUD
or
Each press switches the modes as follows.
1 “EX.BASS” (Extra Bass) lights.
The lowest and highest frequencies are en-
hanced regardless of the current volume
level.
phones
÷ Headphones with a stereo mini plug can be con-
nected.
÷ The sounds from all speakers are cut off.
2 “LOUD” (Loudness) lights.
The lowest and highest frequencies are en-
hancedaccordingtothecurrentvolumelevel.
(Effective during low-volume listening.)
3 Both indicators off.
Muting the sound temporarily (Remote control unit only)
Sound enhancement mode is disen-
gaged.
Blinks
MUTE
÷ Adjusting the tone while the “LOUD” or “EX.BASS”
indicator is lit turns it off and cancels the sound
RANDOM PGM REPEAT ALL
S
enhancement mode.
fl
AUTO POWER SAVE function
÷ Press again to resume the original volume.
When the unit is ON and the unit is left for 30 min-
utes with CD and TAPE not operating, the unit is
switched off automatically by this function. This is
convenient when you forgot to switch off the unit.
This function can be activated or deactivated by the
following operation.
÷ This is also cancelled when the volume is changed.
Basection
Standby mode
When the standby/timer indicator on the main unit
lights in red or orange, a minute current flows for
memory protection. This condition is called standby
mode.
1 Select “A.P.S. SET?”.
VOLUME / multi control
menu
(Pressthe“set/demo”keywhilethe“?”mark
is blinking.)
2 Select.
1
2
RANDOM PGM REPEAT ALL
TRACK NO.
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
TP TA PTY
VOLUME / multi control
TOTAL AUTO TUNED
STEREO
kHz
A.P.S. off
A.P.S. on
FM
A
M
NR T.E.
PM
8 0 1 8 0 0 0 0
MHz BEST HITS O.T.E.
TITLE SEARCH
D EDIT
A.P.S.
A.P.S.
C D • • • • •
M
•
• • •
Goes off
Lights
When CD has been selected.
3 Set it.
1
2
RANDOM PGM REPEAT ALL
TRACK NO.
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
set/demo
TP TA PTY
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
NR T.E.
PM
8 0 1 8 0 0 1 2
MHz BEST HITS O.T.E.
TITLE SEARCH
MD EDIT
÷ When the TUNER or AUX input is selected, APS
operates only when the volume is set to zero or when
MUTE is on.
V O L U M E • 2 0 • •
Volume display
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Let's put out some sound
HM-331 (En/T)
When a disc is placed into the CD player in advance,
the unit will be switched on automatically by press-
ing the CD 6 key, and playback will start.
Playback of CD
1BIT
DUAL D/A CONVEATER
To fast forward and backward
Skipping tracks
To stop playback
1
Playback from
desired track
Skipping tracks
Start playback/
To pause playback
2
2
To stop playback
Start playback/
To pause playback
1. Load a disc.
Basection
The label side must be on top.
Open the CD cover.
1 Open the CD cover.
2 Place a disc.
3 Close the CD cover.
0
push open
1
2. Start playback.
Lights
CD
6
2
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Let's put out some sound
HM-331 (En/T)
Skipping tracks
Playback from desired track
Select the desired track No.
To skip backward
To skip forward
1
4
2
5
8
0
3
6
9
4
4
1
1
TAPE / preset
7
+10
÷ The track in the direction of the key pressed is
skipped, andtheselectedtrackwillbeplayedfrom the
beginning.
Press the numeric keys as shown below....
To select track No. 23 : 003
To select track No. 40 : 0000)
÷ When the 4 key is pressed once during playback, the
track being played will be played from the beginning.
÷ Operation also is possible with the keys 4 and ¢
of the remote control unit.
To pause playback
To fast forward and backward
(Remote control only)
CD
6
1
¡
÷ Each press pauses and plays the CD alternately.
Backward
search
Forward
search
To stop playback
STOP
7
Basection
÷ Playback starts from the position where the key is
released.
In regard to CD-TEXT
When discs conforming to CD-TEXT are played with
this unit, the text information recorded on the CD
(disc name or titles) is displayed automatically.
÷ Do not touch the played side of disc.
÷ Be sure to place a disc horizontally. Placing it with an
inclination will result in malfunction.
Time display on CD player
(Remote control unit only)
Each press of the TIME DISP. key changes the
displayed contents.
1
1
2
RANDOM PGM REPEAT ALL
TRACK NO.
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
(Elapsedtimeoftrackbeingplayed)
TP TA PTY
1 2 3
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
(Remaining time of track being
played)
NR T.E.
PM
8 0 1 8 0 0 1 2
MHz BEST HITS O.T.E.
- 2 3 7
TOTAL
2
TITLE SEARCH
D EDIT
C D • • • • •
M
•
• • •
(Elapsed time of entire disc)
2 3 4 5
3
TOTAL
÷ Titles are displayed for discs conforming to CD-TEXT.
÷ After a few seconds, play starts from track No.1.
(Remaining time on entire disc)
4
- 3 6 1 5
÷ Only time information 1 and 2 can be displayed
during single-track repeated playback or random play-
back.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Let's put out some sound
HM-331 (En/T)
If you load a tape in the cassette deck in advance while
the power is off. pressing the TAPE key turns power
on automatically and starts the tape playback.
Playback of tape
tape EQ.
Selection of reverse mode
To wind tape at high
speed
2
2
2
1
To stop playback
To stop playback
Start playback
Basection
1. Load a cassette tape.
A
1 Open the door.
2 Insert a tape and close the door.
2
2
0
push open
1
2. Start playback.
Transport direction indicators
During playback, the tape running direction changes each time the
key is pressed.
direction
2
2
TAPE
Transport direction indicators
The “direction” indicators show the current direction in which the tape
advances when playback or recording is started automatically by the
one-touch operation, etc. This direction is the direction stored in memory
when the tape was last stopped.
(To change the tape transport direction, press the TAPE key (2, 3) dur-
ing playback then press the stop key (7).)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Let's put out some sound
HM-331 (En/T)
To wind tape at high speed (remote control only)
To stop playback
To fast wind in
direction |
To fast wind in
direction \
STOP
7
1
¡
÷ Do not take out the cassette tape until the tape
transport has stopped completely.
Selection of reverse mode (Main unit only)
1Select “TAPE RVS. ?”.
÷ Press the 7 key to stop fast winding.
VOLUME / multi control
menu
Selection of TAPE equalizer (tape EQ.)
(Main unit only)
When playing a tape prerecorded with Noise
Reduction system (such as the DOLBY NR) ON, be
sure to set the "tape EQ." ON for playback.
set/demo
(Press the “set/demo” key while the “?” mark is
blinking.)
tape
EQ
Lit when “tape EQ.” is ON
2 Select.
Initial setup
T.E.
“ ” : (REVERSE)
Both sides are played back (recorded), and
then the tape stops.
Each press switches the modes as follows.
1 “tape EQ.” ON......... TAPE equalizer is used.
2 “tape EQ.” OFF ....... TAPEequalizerisnotused.
VOLUME / multi control
“ ”: (ONE-WAY)
Only one side is
played back (re-
corded), and then
the tape stops.
“
”:
(ENDLESS)
Both sides are
played back
Basection
÷ Select the "tape EQ." ON mode according to the
recording condition of the tape.
endlessly.
(The tape stops
after recording
onto both sides.)
3 Set it.
Lights
set/demo
1
2
RANDOM PGM REPEAT ALL
TRACK NO.
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
TP TA PTY
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
NR T.E.
PM
8 8 8 8 0 0 0 0
MHz
O.T.E.
TITLE SEARCH
T A P E • •S T O P •
MD EDIT
Tape counter display (Remote control unit only)
Each press of the TIME DISP. key changes the
displayed contents.
÷ Normal (TYPE ), high (TYPE ), or metal (TYPE ) tape
selection is set automatically.
÷ Remove tape slack before loading.
÷ Close the door securely.
AM
1
(Tape count)
0 0 0 0
8 4 5
2
AM
(Time display)
A tip for use of the tape counter
The tape counter is set to “0000” when a cassette tape is
loaded.
Displayed when the deck is loaded with a tape.
By writing down the counter reading in case you want to
interrupt recording (playback) in the middle of the tape,
the memo will be helpful as a reference for locating the
same position when continuing the recording (playback)
the next time. The tape counter figure decrements dur-
ing recording or playback of the back side (while the 2
tape transport indicator is lit).
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
TP TA PTY
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
NR T.E.
PM
8 8 8 8 0 1 5 2
MHz
O.T.E.
TITLE SEARCH
T A P E • •P L A Y •
MD EDIT
TRACK NO.
TOTAL AUTO TUNED
STEREO
To set the tape counter
to “0000”, open the cas-
sette holder once.
Then the counter will be
reset.
FM
A
M
kHz
MHz
PM
8 8 8 8 0 0 0 0
Reverse mode indication
T A P E • •S T O P •
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Let's put out some sound
HM-331 (En/T)
Receiving broadcast station
When the “TUNER/band” key is pressed,
the unit will automatically be switched on
and reception status will be reached.
It is also possible to receive them by one-touch
operations by storing up to 40 stations in the
preset memory.
Collective presetting
of stations
Collective presetting of stations
Auto/manual station switching
2
Preset call
1
2
2
One-by-one presetting
1. Select the broadcast band.
Basection
Each press changes the band.
1FM
2AM
TUNER / band
1
Select a station
2. Select a station.
(Remote control only)
1
¡
When no stations have been memorized
Auto tuning : The next broadcasting station will be received
automatically each time this key is pressed.
Manual tuning : Press the key repeatedly or hold it depressed until
a station is received.
2
Select a station
When stations have been memorized (preset call)
4
4
Every time the key (4 or ¢) is pressed, the preset
stations are switched over as follows.
1
1
TAPE / preset
Press ¢ for the order of 1=2=3 ... 38=39=40=1...
Press 4 for the order of 40=39=38 ... 3=2=1=40...
2
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Let's put out some sound
HM-331 (En/T)
Collective presetting of stations (auto preset)
One-by-one presetting (manual preset)
1 Receive a broadcast.
1 Press the ENTER key during reception.
TRACK NO.
TOTAL AUTO TUNED
STEREO
ENTER
FM
2 Select “A. MEMORY (or A.PRESET) ?”.
A
M
kHz
MHz BEST HIT
PM
- - 1 1 8 9 0 0
VOLUME / multi control
menu
M E M O R Y E M O R
“MEMORY” lights
(for approx. 5 sec.)
(Proceed to step 2
while “MEMORY”
is lit.)
set/demo
2 Select one of the preset numbers from 1 to 40.
(Press the “set/demo” key while the “?” mark is
blinking.)
4P.CALL¢
TP
The numbers
become
smaller
The numbers
become larger
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
N
PM
0 1 1 1 0 2 5 0
MHz BEST HITS O.T.E.
TITLE
MD E
A U T O R M E M O R Y
3 Press the ENTER key again.
Thedisplaydiffersaccordingtotheequipment(coun-
try and area), and “AUTO PRESET” also may be
shown.
TRACK NO.
FM
TOTAL AUTO TUNED
STEREO
A
PM
M
kHz
MHz BEST HITS O.T.
ENTER
0 1 1 1 8 9 0 0
C O M P L E T E ! R Y
÷ A maximum of 40 stations of the band presently being
received will be preset.
÷ When there are many stations and the intended station
has not been preset, please also use “One-by-one
presetting (manual preset)”.
Basection
(Repeat steps 1,2,3 to preset other stations)
÷ Ifseveralstationsarepresetunderthesamenumber,the
previous memory is replaced with the latest memory
contents.
Reception band indication
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON
TP
T
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
AM
N
PM
0 1 1 8 8 9 0 0
MHz BEST HITS O.T.E.
TITLE
MD ED
T U N E R • • • •
• •
Tuning mode switching and reception mode
(Remote control unit only)
Each press alternates the mode.
1 “AUTO” lit
PGM
(Auto tuning, stereo reception)
2 “AUTO” not lit
The“TUNED”indicatorlightswhen
a station is received.
(Manual tuning, monaural re-
ception)
Lights at the time of
automatic station
selection.
Use the manual tuning mode when reception is
noisy due to weak reception. (In the manual mode,
stereo broadcasts are received in monaural.)
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
TOTAL AUTO TUNED
STEREO
kHz
R·D·S EON
TP
T
TRACK NO.
FM
AM
N
PM
0 1 1 8 8 9 0 0
MHz BEST HITS O.T.E.
÷ Normally, use the AUTO (Auto tuning, stereo recep-
TITLE
MD ED
tion) mode.
T U N E R • • • •
• •
Frequency display
Lights during stereo reception
Tuner frequency display (Remote control unit only)
Each press of the TIME DISP. key changes the
displayed contents.
÷ When a key is held depressed, preset stations will be
skipped at an interval of about 0.5 second.
÷ Preset stations can be called using the number keys on
the remote control unit.
FM
1
(Frequency display)
MHz
0 1
8 9 0 0
8 4 5
2
AM
(Time display)
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Let's recording
HM-331 (En/T)
Note that this cassette deck cannot record onto
Metal tapes.
Recording on TAPE
NNoottee
5
3
3
4
2
2
2
1
Stop the recording Pause the recording
Stop the recording
1. Load a tape in deck.
0
push open
1 Open the door of deck.
2 Insert a tape.
3 Close the door.
Basection
÷ Differentiation between normal
(TYPE ) and high (TYPE ) tape is
set automatically.
÷ Remove tape slack before loading.
1
2. Select the tape transport direction.
To reverse the transport direction
direction
2
2
÷ When recording is started, the tape is
1 Press the play key.
2 Press the play key again.
3 Stop playback.
transported in the direction selected in
this step.
TAPE
÷ Wind the tape to the position where
recording is to be started.
2
Check the tape transport direction indicator.
*
3. Set the recording condition.
Select the reverse mode. (
VOLUME / multi control
menu
set/demo
3
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Let's recording
HM-331 (En/T)
Pause the recording
Points in CD recording
When recording CD tracks onto a tape, if you leave
the cassette deck in record-pause mode beforehand,
the cassette deck recording can be started at the
CD starts to be played. (Synchro recording function)
CD
TAPE
REC
TAPE rec
Blinks
1 Put the CD player in pause mode.
2 Select the track to be recorded with
the skip (w2, 3∑) keys.
(The CD player pauses at the begin-
ning of the selected track.)
3 Put the cassette deck in Record-pause
mode.
÷ Press the “TAPE rec” key during recording. It stops
after leaving a non-recorded blank of 4 seconds.
(Press the key again to resume recording.)
Stop the recording
(Press “TAPE rec” key twice)
4 Start playing the CD.
(Synchro recording starts)
STOP
7
÷ Recording stops when the stop (7) key of the CD player
is pressed.
Basection
4. Select the source to be recorded.
Select an input source other
than “TAPE”
TUNER (Broadcasts)
CD
C D • • • •• •
Example:
AUX (External input)
To select the CD input
The character information
display shows the recording
input source.
Lights
CD
6
÷ If a CD has already been loaded, it starts to play now. Press the 7 key to
stop it.
4
5. Start recording.
TAPE rec
1 Play (or tune) the input source to be recorded.
2 Start recording.
÷ Recording stops automatically when the tape side (s) to be recorded have
been fully recorded.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Playback of CD
HM-331 (En/T)
(program playback)
Listening in the desired sequence
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Select the “CD” input.
Let the “PGM” indicator light.
Lights
1
RANDOM PGM REPEAT ALL
SLEEP A.P.S.
O
Press in stop mode
TRACK NO. TOTAL AUTO TUNED
S
FM
PGM
A
PM
M
kH
MH
8 0 1 8 0 0 0 0
Select track numbers in the order you want to play them.
2
SelePcGtMion of tracks
RANDOM
REPEAT ALL
SLEEP A.P.S. O.T.T. PR
1 Select the track.
TRACK NO.
TOTAL AUTO TUNED
STEREO
1
2
5
8
0
3
6
9
FM
M
Program position of the
track to be selected next.
A
kHz
MHz BES
PM
8 0 5 8 P - 0 1
4
P G M • C D • • ••
7
Press the numeric keys as shown below....
To select track No. 23 : 003
+10
To select track No. 40 : 0000)
(Go to step 2 within 8 seconds.)
÷ Up to 32 tracks can be programmed. When “FULL” is
displayed, no more tracks can be programmed.
÷ If you made a mistake, press the CLEAR key and enter
the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
2 Confirm the selection.
PGM
(To select more than one track,
repeat steps 1 and 2 for each
track.)
÷ “
–
– : – –” is displayed when the total programmed
period has attained 100 minutes or more.
Start playback.
3
÷ Tracks will be played in the order they were programmed
(following the program numbers).
÷ When the 4 or the ¢ key is pressed during play, the
program will jump to the preceding or the following track
respectively.
CD
6
÷ When the 4 key is pressed once during playback, the
play position returns to the beginning of the current track
being played.
Alpasection
To stop playback
To quit the program mode
Clearing tracks from the end
Clearing all tracks
Press in stop mode
PGM
Press in stop mode
7
CLEAR
Goes off
RANDOM PGM REPEAT ALL
RANDOM PGM REPEAT ALL
TRACK NO.
SLEEP A.P.S. O.T.T. PR
SL
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
TRACK NO. TOTAL AUT
PM
8 - - 8 P - 1 4
MHz BEST
(P-14 has been deleted.)
÷ Each time the key is pressed, the
last track in the program is cleared.
÷ The entire program is cleared.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Playback of CD
HM-331 (En/T)
Repeated playback
You can repeatedly listen to a favorite track or disc.
Select the “CD” input.
Setup for repeating a single track
Confirm that this is not lit.
1 Confirm that the “PGM” indi-
RANDOM PGM REPEAT ALL
SLE
cator is not lit.
(If the “PGM” indicator is lit,
press the PGM key to turn it
off.)
2 Select “REPEAT”.
Each press switches the repeat mode.
1 REPEAT
Lights
2 REPEAT ALL
RANDOM PGM REPEAT ALL
SLE
REPEAT
3 Off.... Repeat deactivated
Setup for repeating all tracks in a disc
Confirm that this is not lit.
1 Confirm that the “PGM” indi-
RANDOM PGM REPEAT ALL
SLE
cator is not lit.
(If the “PGM” indicator is lit,
press the PGM key to turn it
off.)
Each press switches the repeat mode.
2 Select “REPEAT ALL”.
Lights
1 REPEAT
2 REPEAT ALL
RANDOM PGM REPEAT ALL
SLE
REPEAT
3 Off.... Repeat deactivated
TRACK NO TOTAL AUTO
Aplasection
Setup for repeating selected tracks
1 Program the track sequence
according to steps 1 to 2 of
“Listening in the desired se-
“REPEAT”, “PGM” light.
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
R·D·
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
quence”.
¢
PM
8 0 5 8 P - 0 1
MHz BEST HITS O.T.E.
P G M • C D • • •
TI • •
M
2 Select “REPEAT”.
REPEAT
÷ All selected tracks will be repeated.
Start playback
To stop repeated playback
Press the REPEAT key repeatedly until the
repeat mode is switched off.
CD
6
÷ The “REPEAT” or “REPEAL ALL” indicator turns off
and playback according to the current CD player
mode starts.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Playback of CD
HM-331 (En/T)
(random playback)
Listening to an unexpected title sequence
As the titles each time are selected randomly, the music can be enjoyed without getting tired of it.
Select the “CD” input.
Confirm that the “PGM” indicator is not lit.
1
Confirm that this is not lit.
(If the “PGM” indicator is lit,
press the PGM key to turn it
RANDOM PGM REPEAT ALL
SLEE
off.)
TRACK NO. TOTAL AUTO
PGM
Press the RANDOM key.
2
Each press switches the modes as follows.
1 “RANDOM” on ... Random playback
2 “RANDOM” off ... Normal playback
RANDOM
1
2
RANDOM PGM REPEAT ALL
TRACK NO.
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
TP TA PTY
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
NR T.E.
PM
8 0 5 8 P - 0 1
MHz BEST HITS O.T.E.
TITLE SEARCH
MD EDIT
C D M R A N D O M • •
÷ Playback stops after each title has been played once.
÷ The random playback can also be repeated by pressing
the REPEAT key.
To select another track in the middle of playing one
To cancel random playback
Press so that the “RANDOM”
indicator goes off.
Alpasection
4P.CALL¢
RANDOM
÷ Pressing the 4 key once returns to the beginning
of the track being played.
÷ The “RANDOM” indicator goes off and the playback
in order of the tracks starts from the track being
played.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Playback of CD
HM-331 (En/T)
In regard to the DOT DISP. key
(When pressed during stop)
When a title recorded in a CD-TEXT disc is too
long to be displayed in the dot display, press
this key to scroll the display and view the
characters which has not be displayed.
Scrolls the disc title display.
PM
MHz BEST HITS O.T.E.
T
W o r l d N M u s i c
(When pressed during playback)
Scrolls the track title display.
DOT DISP.
T
N e w l Y o r k : B i
Aplasection
Download from Www.Somanuals.com. All Manuals Search And Download.
(Radio Data System) (Except for some areas)
28
R.D.S.
HM-331 (En/T)
RDS is a system which transmits useful informa-
tion (digital data) for FM broadcasts together
with the broadcast signal. Tuners and receivers
designed for RDS reception can extract the in-
formation from the broadcast signal for use with
various functions such as automatic display of
the station name.
This unit is equipped with the following functions utilizing RDS data :
The “RDS” indicator lights up when an RDS broad-
cast (signal) is received.
PTY (Program Type Identification) Search : ª
The tuner automatically searches for a station which is
currently broadcasting a specified program type (genre).
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON NEWS
TP TA PTY
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
PS (Program Service Name) Display :
When an RDS broadcast is received, the station name is
automatically displayed.
FM
A
M
NR T.E.
PM
0 1 1 1 0 2 5 0
MHz BEST HITS O.T.E.
TITLE SEARCH
T U N E R • • • •
MD EDIT•
EON (Enhanced Other Network) :
⁄
Whentheinformationtobereceivedissetinadvanceand
any RDS station in the same network starts broadcasting
of such information, the reception automatically will be
switched to that station.
÷ Some functions may not be provided or be given
different names depending on countries or ar-
eas.
Before using RDS
For reception of RDS stations, the auto presetting function must be used to preset the stations. With the auto
presetting function, RDS stations are preset with priority. “NO DATA” will be flashed when a station is not
preset by auto presetting.
Alpasection
Download from Www.Somanuals.com. All Manuals Search And Download.
29
R.D.S. (Radio Data System) (Except for some areas)
HM-331 (En/T)
(PTY search)
Searching for a desired program type
By specifying the type of program (genre) you
want to listen to, the tuner automatically
searches for a station which is currently broad-
casting a program of the specified type.
Set the reception band to FM. Preset RDS stations with the auto preset function.
¡
1
2
RANDOM PGM REPEAT ALL
TRACK NO.
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
1Select the PTY search mode.
TP TA PTY
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
NR T.E.
PM
0 1 1 1 0 2 5 0
MHz BEST HITS O.T.E.
TITLE SEARCH
PTY
N E W S R • • • •
MD EDIT• •
When an RDS broadcast is received, the program type
is shown on the display. If no PTY data is available, or
if the station is not an RDS station, “NONE” is dis-
played.
Select the desired program type.
2
Program type table
Use program type table on the right for your
convenience.
A
1 ¡ keys
B
Program Type Name
Display
A Selection with the 1 ¡
1
2
3
4
5
6
7
8
9
0
Pop Music
Rock Music
*M.O.R. Music
Light Classical
Serious Classical
Other Music
News
Current Affairs
Information
Sport
POP M
keys
1
ROCK M
M.O.R. M
LIGHT M
CLASSICS
OTHER M
NEWS
AFFAIRS
INFO
SPORT
DOWN
1
¡
Select while “PTY” is lit.
The desired program type can
beselectedwiththe1¡keys
from 29 types. Press the key and
release it when the desired type
is displayed.
UP
¡
Aplasection
Education
Drama
EDUCATE
DRAMA
Culture
Science
Varied
CULTURE
SCIENCE
VARIED
B Selection with the numeric
keys
Weather
Finance
Children's programs
Social affairs
Religion
WEATHER
FINANCE
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
1
4
2
5
8
0
3
6
9
7
Phone in
Travel
+10
Leisure
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
Jazz music
Country music
National music
Oldies music
Folk music
Documentary
The program types 1 to 9 and 0
can be selected directly with the
number keys.
Use the 1 ¡ keys to select
other program types.
FOLK M
DOCUMENT
*M.O.R. Music (Middle of the Road Music)
Download from Www.Somanuals.com. All Manuals Search And Download.
30
R.D.S. (Radio Data System) (Except for some areas)
HM-331 (En/T)
Start the search.
3
When searching for a Rock Music broadcast
Display while the tuner is searching.
Blinks
PTY
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
TP TA PTY
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
NR T.E.
PM
0 1 1 1 0 2 5 0
MHz BEST HITS O.T.E.
TITLE SEARCH
MD EDIT
R O C K R M • • •
•
•
Program type name display.
When a station is received.
Goes off
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
÷ No sound is heard while “PTY” is blinking.
TP TA PTY
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
÷ If a program of the desired type cannot be found, “NO
PROG” is displayed, then after several seconds the
display returns to the original display.
A
M
NR T.E.
PM
0 1 1 1 0 2 5 0
MHz BEST HITS O.T.E.
TITLE SEARCH
B B C K 1 M • • •
MD
•
EDIT
•
÷ If a program of the desired type is found, that program is
received and the program type name display changes
temporarily to the station name display.
Station name display.
To change to a different program type :
Repeat steps 1, 2, 3.
Alpasection
Download from Www.Somanuals.com. All Manuals Search And Download.
31
R.D.S. (Radio Data System) (Except for some areas)
HM-331 (En/T)
(EON)
To be able to listen to the desired information at any time
By using the EON function, which manages the information of other stations, listening to desired infor-
mation like traffic information or news etc. can be reserved even when it is not being transmitted at the
present. When listening to a station with the “EON”display lit and another station of the same network
starts to broadcast an information program for which a reservation has been made, then that station
will be selected automatically. When the desired information program ends, return is made to the
original program.
Set the reception band to FM.
Auto preset the stations.
)
1
This is not required when auto presetting has already
been executed.
1 Receive a broadcast.
2 Select ”A. MEMORY
¡
(or A.PRESET) ?”.
VOLUME / multi control
menu
2
2
3
set/demo
2
2
(Press the ”set/demo” key
while the ”?” mark is blinking.)
÷ When all 40 stations have already been preset by the
procedurefor“One-by-onepresetting(manualpreset)”,
the EON function will not operate. Auto presetting must be
used.
The EON data presently being
broadcasted are taken in auto-
matically.
Select the desired information.
2
Aplasection
Each press switches the modes as follows.
1 TA ........................... Traffic Announcement
2 NEWS ..................... News
3 TA/NEWS .............. TrafficAnnouncement/
News
4 Display not lit ........ EON cancelled
TA/NEWS
This lights when a station transmits traffic information.
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON NEWS
TP TA PTY
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
NR T.E.
PM
0 1 1 1 0 2 5 0
MHz BEST HITS O.T.E.
TITLE SEARCH
T U N E R • • • •
MD EDIT• •
Lights when “NEWS” is selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
R.D.S. (Radio Data System) (Except for some areas)
HM-331 (En/T)
Receive an RDS station.
3
“RDS” and “EON” are lit.
Select a station where “RDS”
and “EON” are lit.
1
2
RANDOM PGM REPEAT ALL
TRACK NO.
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON NEWS
TP TA PTY
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
NR T.E.
PM
0 2 1 1 9 0 0 0
MHz BEST HITS O.T.E.
4P.CALL¢
TITLE SEARCH
T U N E R • • • •
MD EDIT• •
÷ When “EON” does not light although an RDS station is
received, that station is not transmitting EON data.
Please select a different station.
÷ When TA is desired, select a station where the “TP”
display lights.
Wait for the desired information.
4
÷ When one of the stations of the network of the station
received in 3 starts broadcasting the program contents
selected in 2, that station will be received automatically.
Atthistime, TapeplaybackwillstopandCD playbackwill
pause. However, external equipment (AUX) will remain
as it is.
CD or TAPE playback may also
be started.
As long as the unit is ON, the
unit is always ready for the re-
ception.
÷ When the unit is OFF or during recording (including
dubbing), the EON function does not operate.
÷ Whenthetransmissionoftheselectedprogramcontents
ends in case of automatic reception with the EON func-
tion, return will be made to the status directly before
operation of the EON function. When CD or TAPE play-
back has been interrupted, it will be continued from the
point of interruption.
Alpasection
In case of waiting for information with an
RDS station without EON function
When there is no “EON” display with the op-
erations of steps 3 and 4 and the desired in-
formation is selected in advance, waiting for the
desired information will be done only with the
presently received RDS station.
In regard to TP (Traffic Program) indicator
When the “TP” indicator is lit, this indicates that
the station or another station in the same net-
work is broadcasting traffic information. Even
without an EON reservation, traffic information
can be heard from the station when “TP” indi-
cator is lit for the presently received station.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Convenient Recording Methods
HM-331 (En/T)
Selection of the Recording Type
This unit provides the following recording fea-
tures in addition to normal recording. Select the
Note that this cassette deck cannot record onto
Metal tapes.
NNoottee
appropriate method according to the purpose of
recording.
To record CD with a simplified method
One-touch recording (CD=TAPE)
›
One-touch recording of an entire CD onto a tape.
One-touch recording (all-track recording)
\
One-touch recording of the CD track being
played onto a tape.
(This is convenient for recording of desired
tracks from a disc being heard for the first time.)
One-touch recording (single-track recording)
\
To record desired CD tracks by reordering them
Program recording (CD= TAPE)
fi
Recording of programmed tracks in the pro-
grammed order.
(Convenient for recording only the desired CD
Program recording
\
tracks in the desired order.)
Program recording can be used in combination
with the ”One-touch recording” .
Aplasection
With recording onto tape, the track will be interrupted for the part of the guide tape at the tape reversal, where
recording is not possible. Please use single-side recording if this is to be avoided.
NNoottee
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Convenient Recording Methods
HM-331 (En/T)
One-touch recording (CD=TAPE)
The one-touch recording can record all tracks in a CD with a one-touch operation (all-track recording).
It can also record the current CD track being played from the beginning (single-track recording).
Be sure to put the cassette deck in stop mode
1Make the preparations for recording.
CD =TAPE
1 Perform steps 1. to 3. of the procedure in
”Recording on TAPE”.
™
2 Insert disc in the CD player.
Check the current play mode of the CD player.
One-touch recording (all-track recording)
2
One-touch recording (single-track recording)
If it is in play mode, stop it.
Select the desired CD track and play it.
CD
7
6
To record other tracks using ”one-touch recording
(single-track recording)”, repeat steps 2 and 3 for
each track.
Start recording.
3
Remote comtrol unit
Main unit
1 Press the TAPE O.T.E. key.
1 Select “O.T.E. ?“.
VOLUME / multi control
TAPE
O.T.E.
menu
2
2
2 Start recording.
÷ WhentheTAPEO.T.E.or“set/demo”keyispressed
for”One-touchrecording(single-trackrecording)”,
the CD track being played is replayed from the begin-
ning and recording start at the same time.
set/demo
Alpasection
2
2
To interrupt a recording
At the end of the recording
7
Cassette deck : Stop is executed after an unre-
corded portion of about 4 sec. has
been produced.
(Recording and playback will be
stopped.)
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Convenient Recording Methods
HM-331 (En/T)
Program recording (CD =TAPE)
Desired CD tracks can be programmed in the desired sequence and recorded onto a tape.
Recording preparation is required.
™
(Be sure to put the cassette deck in stop mode.)
1Program the desired sequence of CD tracks.
CD =TAPE
Perform steps 1 and 2 of the procedure in
”Listening in the desired sequence (Program
÷ When the PGM key is pressed to cancel the edited
contents, the entire editing contents will be erased.
÷ Tracks programmed in excess of the tape recording time
will be cut off.
playback)”.
¢
2Start recording.
TAPE
O.T.E.
÷ Recording of the programmed tracks in the programmed order starts.
÷ To perform operation on the main unit, see step 3 in the procedure in ”One-touch recording”.
›
Aplasection
To interrupt a recording
At the end of the recording
Cassette deck : Stop is executed after an unre-
corded portion of about 4 sec. has
been produced.
7
(Recording and playback will be
stopped.)
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Tone adjustment
Tone adjustment
HM-331 (En/T)
The lowest and highest frequency bands can be adjusted independently. (Remote control only)
Each press switches the operation.
1 Select the frequency band.
1 “BASS” (low frequency) adjustment
TITLE
TONE
B A S S T C - - 6 •
•
MD E
2 “TREBLE” (high frequency) adjustment
(Go to step 2 within 5 seconds.)
TITLE
T R E B L E - + 4 •
•
MD E
2 Adjust.
3 Normal mode
%
VOLUME
fi
÷ The levels of both “BASS” and “TREBLE” can be
adjusted in 2 steps in the range between -8 and +8.
÷ Adjusting the tone while the “LOUD” or “EX.BASS”
indicator is lit turns it off and cancels the sound enhance-
ment mode.
(To adjust the other frequency
band, repeat steps 1 and 2
for it.)
(Adjust for the desired left / right balance.)
Balance adjustment
Adjusts the balance of left and right volume. (Main unit operation only)
1Select “BALANCE ?”.
Turningtheknobswitchesthefunctionasshown
in the character information display.
TAPE RVS.
O.T.E.
?
?
VOLUME / multi control
menu
A. MEMORY (or A. PRESET) ?
(Only when the TUNER input is selected)
2
2
set/demo
AUX LEVEL
?
(Only when the AUX input is selected)
BALANCE
TIMER SET
A.P.S. SET
?
?
?
(Pressthe“set/demo”keywhile
the “?” mark is blinking.)
Adjust.
2
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
1
TP TA PTY
VOLUME / multi control
STEREO
kHz
TRACK NO.
TOTAL AUTO TUNED
FM
A
M
A
NR T.E.
PM
8 0 1 8 0 0 1 2
MHz BEST HITS O.T.E.
TITLE SEARCH
MD EDIT
B A L A N C E • • •
•
2
2
d
o
w
p
n
u
The right
volume is
decreased.
The left
volume is
decreased.
2 Set it.
set/demo
2
2
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Tone adjustment
HM-331 (En/T)
Adjusting the AUX Input Level
This adjusts the input level for the external equipment (video deck etc.) connected to the AUX input
terminal. Adjust so that the volume of the AUX input source sounds at an equivalent level to the CD .
(Main unit operation only)
1Select AUX (external input).
1 Select AUX (external input).
AUX
2
2
2 Playtheconnectedequipment.
2Select “AUX LEVEL ?”.
Turningtheknobswitchesthefunctionasshown
in the character information display.
VOLUME / multi control
menu
TAPE RVS.
O.T.E.
?
?
2
2
A. MEMORY (or A. PRESET) ?
(Only when the TUNER input is selected)
set/demo
AUX LEVEL
?
(Only when the AUX input is selected)
(Press the “set/demo” key while
the “?” mark is blinking.)
2
2
BALANCE
TIMER SET
A.P.S. SET
?
?
?
Adjust.
3
1 Adjust the input level.
VOLUME / multi control
N
PM
MHz BEST HITS O.T.E.
2
2
TITLE
ED
I N P U T C + 2 • •
MD•
Aplasection
Set level (display for about 5 sec)
The level
The level
decreases.
increases.
2 Set it
set/demo
2
2
÷ Adjust the input level while “INPUT” is displayed.
÷ Adjustment is possible over the range from -6 to +3.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust the clock before setting the timer.
38
Clock adjustment
HM-331 (En/T)
Activate the clock adjustment mode.
1
÷ The “CLOCK” display starts to blink during time setting.
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
(Hold for more than 2 sec.)
TP TA PTY
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
2
2
NR T.E.
PM
8 0 1 8 1 2 0 0
MHz BEST HITS O.T.E.
menu
TITLE SEARCH
EDIT
A D J U S T + 2 • •
MD•
÷ The time display starts to blink.
2Enter the figure of hour.
1
Example: Adjustment to 8:07
VOLUME / multi control
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
TP TA PTY
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
NR T.E.
PM
8 0 1 8 1 8 0 0
MHz BEST HITS O.T.E.
TITLE SEARCH
EDIT
A D J U S T + 2 • •
MD•
2
2
To decrease
hour
To increase
hour
2 Set it.
÷ The time of the day is represented in 12-hour AM/PM
method.
set/demo
÷ Press the “set/demo” key. The hour is entered and the
minute display starts to blink.
3Enter the figure of minute.
1
Example: Adjustment to 8:07
VOLUME / multi control
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
R·D·S EON EON
TP TA PTY
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
A
M
NR T.E.
PM
8 0 1 8 1 8 0 7
MHz BEST HITS O.T.E.
TITLE SEARCH
EDIT
A D J U S T + 2 • •
MD•
2
2
To decrease
minute
To increase
minute
Alpasection
÷ If you make a mistake, restart from the beginning.
÷ To adjust correct time, press the “set/demo” key at the
same moment as a time announcement.
÷ After a power failure or the power cord has been un-
plugged then plugged in again, it is required to set the
time again.
2 Set it.
set/demo
÷ When the time of day has been set by pressing the “set/
demo” key, the display shows “COMPLETE !”.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust the clock before setting the timer.
39
Timer operation
HM-331 (En/T)
Operate easy To use Timer (O.T.T.)
Playback of the selected input source starts at the specified time, and the unit is switched off after one hour. This
timer operates only once directly after setting.
Timer playback, timer recording (PROG.1, PROG.2)
With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the
previously set time period.
AI timer playback (PROG.1, PROG.2)
The volume increases gradually after start of timer playback.
Sleep timer (SLEEP)
The unit is turned OFF automatically after the specified period has elapsed.
Connect the related equipment under reference to “System connection”.
6
Setting the O.T.T.
Timer playback is possible simply by setting the time.
The source selected last before the unit was switched off will be played. One hour after start of timer
playback, the unit will be switched off automatically.
1 Selectthesourcetobeplayed.
Turningtheknobswitchesthefunctionasshown
in the character information display.
2 Select “TIMER SET ?” .
TAPE RVS.
O.T.E.
A. MEMORY (or A. PRESET) ?
?
?
VOLUME / multi control
menu
(Only when the TUNER input is selected)
2
2
AUX LEVEL
(Only when the AUX input is selected)
?
set/demo
BALANCE
TIMER SET
A.P.S. SET
?
?
?
(Pressthe“set/demo”keywhile
the “?” mark is blinking.)
3 Select “O.T.T. SET ?” .
Turningtheknobswitchesthefunctionasshown
in the character information display.
VOLUME / multi control
1 O.T.T. SET
2 PROG. 1 SET
3 PROG. 2 SET
?
?
?
2
2
Aplasection
set/demo
4 Set the ON time.
VOLUME / multi control
Blinks
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. P
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
AM
2
2
PM
8 0 1 8 1 7 0 5
MHz BEST HITS O.T
T U N E R T + 2 •
•
•
The time is
returned.
The time is
advanced.
ON time display
÷ The ON time can be set in steps of 5 minutes.
÷ When the O.T.T. has been set by pressing the
“set/demo” key, the display shows “COMPLETE !”.
5 Set it.
set/demo
2
2
To execute O.T.T.
Perform steps 1 and 2 in the procedure in “Activating or deactivating the O.T.T. or program timer execution”.
w
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust the clock before setting the timer.
40
Timer operation
HM-331 (En/T)
Setting the Program Timer
Two 24-hour timer systems (PROG.1, PROG.2) (which can be used every day) are available.
In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can
be set and selected to be activated or not as required.
1Make preparations for the play (recording).
To listen to CD
To listen to tape
Insert a disc.
Set a tape into.
(Program playback is not possible.)
To listen to radio
The station should be preset prior
to the above.
Playing the auxiliary input source
Make timer setting of the compo-
nent connected to the AUX input
jacks.
For recording
Make preparations for recording.
TAPE ™
¡
÷ Timer reservation is possible for the two types PROG.1 and PROG. 2 at the same time.
÷ Please make reservations with an interval of at least one minute, so that the operation times of PROG. 1 and PROG. 2 do
not overlap.
Adjust the listening volume.
2
VOLUME / multi control
2
2
÷ When the power is switched on by the timer for
recording, MUTE automatically becomes ON.
Select a program No.
3
Turningtheknobswitchesthefunctionasshown
in the character information display.
1Select “TIMER SET ?”.
VOLUME / multi control
TAPE RVS.
O.T.E.
?
?
menu
A. MEMORY (or A. PRESET) ?
2
2
(Only when the TUNER input is selected)
set/demo
AUX LEVEL
?
(Only when the AUX input is selected)
(Pressthe“set/demo”keywhile
the “?” mark is blinking.)
BALANCE
TIMER SET
A.P.S. SET
?
?
?
2 Select “PROG. 1 SET ?” or
Alpasection
“PROG. 2 SET ?”.
VOLUME / multi control
Turningtheknobswitchesthefunctionasshown
in the character information display.
1 O.T.T. SET
2 PROG. 1 SET
3 PROG. 2 SET
?
?
?
2
2
3 Set it.
÷ The selected program No. lights.
÷ IfaprogramNo. underwhichatimerprogramhasalready
been reserved, it is replaced by the new timer program.
÷ The previously set contents are displayed. (If you do not
want to change them, simply press the “set/demo”
key.)
set/demo
2
2
(Press during display of the pro-
gram contents.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust the clock before setting the timer.
41
Timer operation
HM-331 (En/T)
4Set the ON time then the OFF time.
1 Adjust the time.
1
2
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. PROG.
R
RANDOM PGM REPEAT ALL
SLEEP A.P.S. PROG.
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
FM
A
M
AM
PM
8 0 1 8 1 7 0 0
MHz BEST HITS O.T.E
PM
8 0 1 8 1 8 0 0
MHz BEST HITS O.T
The time is
returned.
The time is
advanced.
O N N T I M E 2 •
•
O F F T T I M E • ••
VOLUME / multi control
2
2
÷ For each of the ON time and OFF time, enter the figure
of “hour” by performing steps 1 and 2 then enter the
figure of “minute” in the same manner.
2 Set it.
set/demo
÷ If you make a mistake, restart from step 3.
5Make the desired reservation.
For timer playback or AI timer playback
VOLUME / multi control
1 Select the mode.
(1) Select “PLAY” or “AI PLAY”.
1 PLAY.......... Timer play
2 REC
(2) Enter it.
3 AI PLAY ..... Timerplaywithgradu-
set/demo
ally increasing volume
2 Select the input source.
(1) Select the source to be
played.
VOLUME / multi control
1 TUNER ...... Broadcasts
2 CD
(2) Enter it.
set/demo
3 TAPE
4 AUX ........... External input (video,
etc.)
3 Select the broadcast station
(only when TUNER is selected
above).
VOLUME / multi control
(1) Select the preset station No.
÷ When the O.T.T. has been set by pressing the
“set/demo” key, the display shows “COMPLETE !”.
set/demo
(2) Enter it.
For timer recording
Aplasection
1 Select the mode.
3 Select the broadcast station
(onlywhenTUNERisselected
above).
VOLUME / multi control
VOLUME / multi control
(1) Select “REC”.
1 PLAY
2 REC
(1) Select the preset station No.
3 AI PLAY
set/demo
set/demo
(2) Enter it.
(2) Enter it.
2 Select the input source.
(1) Select what is to be
recorded.
VOLUME / multi control
1 TUNER
............ Broadcasts
2 AUX
.......External input
(2) Enter it.
set/demo
÷ When the O.T.T. has been set by pressing the “set/
demo” key, the display shows “COMPLETE !”.
To execute program timer
Perform steps 1 and 2 in the procedure in “Activating or deactivating the O.T.T. or program timer execution”.
w
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust the clock before setting the timer.
42
Timer operation
HM-331 (En/T)
Activating or deactivating the O.T.T. or program timer execution
1Select the timer program No. to be used. (Remote control unit only)
Each press of the key switches the program
numbers as follows.
1O.T.T.......... Executes O.T.T. only.
2PROG.1...... Execution of program 1 only.
TIMER
3PROG.2...... Execution of program 2 only.
4PROG.1, 2.. Execution of programs 1 and 2.
5Off.............. Timer off.
÷ The selected program No. lights.
÷ The timer will not function unless a program No. is
selected.
Put the unit in standby mode.
2
POWER
÷ The standby/timer indicator lights in orange in standby
mode.
To set the same timer program again
When timer operation is not required
Press so that the desired PROG. indicators lights.
Press so that all PROG. indicators are OFF.
Press while power is ON.
Press while power is ON.
TIMER
TIMER
1
2
1
2
RANDOM PGM REPEAT ALL
TRACK NO.
SLEEP A.P.S. O.T.T.
STEREO
R·
RANDOM PGM REPEAT ALL
TRACK NO
SLEEP A.P.S. O.T.T.
STEREO
R·D·S E
Lights
Goes off
T
TOTAL AUTO TUNED
TOTAL AUTO TUNED
÷ Be sure to load a disc or tape and adjust the listening
volume.
÷ The reservation contents are held in memory.
To check or modify the reservation contents, restart the timer reservation from the beginning.
NNoottee
Sleep timer (SLEEP)
Alpasection
Set the number of minutes after which the unit is to be turned OFF.
÷ The unit is turned OFF automatically after the set time
has elapsed.
Set the time.
÷ Eachpressincreasesthetimerperiodby10minutes.The
sleep timer can be set up to 90 minutes.
SLEEP
10=20=30...70=80=90=Cancel=10=20...
Lights
1
2
RANDOM PGM REPEAT ALL
SLEEP A.P.S. O.T.T. PROG.
TRACK NO.
TOTAL AUTO TUNED
STEREO
kHz
FM
AM
PM
8 0 1 8 0 0 1 2
MHz BEST HITS O.
To cancel
S L E E P • •1 0 • •
Turn the unit OFF or press the SLEEP key until
the sleep time is cancelled.
Duration for sleep timer
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Important Items
HM-331 (En/T)
Maintenance
Cleaning the heads and peripheral components
Cleaning the head section
For maintaining the best condition of the deck and for longer service life, always
keep the heads (recording / playback / erase), capstan and pinch roller clean.
To clean them, perform the following:
1.Open the cassette holder.
2.Using a cotton swab dipped in alcohol, clean the head (recording / playback /
erase), capstan and pinch roller carefully.
Cotton swab
Capstan
Demagnetizing the head
When the recording / playback head is magnetized, the sound quality will
deteriorate. Insuchacase, demagnetizetheheadusingacommerciallyavailable
demagnetizer (head eraser).
Head
Pinch roller
There are precisely aligned parts around the heads, including the tape guides.
When cleaning, pay special attention so as not to apply shock to them.
Tape guides
NNoottee
Maintenance of the Set
In regard to contact cleaners
When the front panel, the case, etc. becomes dirty, wipe
with a soft, dry cloth. Do not use thinner, alcohol, etc., as
these can cause discoloration.
Do not use contact cleaners because it could cause a mal-
function. Be specially careful not to use contact cleaners
containing oil, for they may deform the plastic component.
Reference
Caution on condensation
Memory backup function
Condensation (of dew) may occur inside the unit when
there is a great difference in temperature between this
unit and the outside.
This unit may not function properly if condensation oc-
curs. In this case, leave the unit for a few hours with the
power left ON, and restart the operation after the con-
densation has dried up.
Be specially cautious against condensation in a fol-
lowing circumstance:
When this unit is carried from a place to another across a
large difference in temperature, when the humidity in the
room where this unit is installed increases, etc.
Stored contents which are Clock display
cleared immediately when
power plug is unplugged
from power outlet
Stored contents which are Amplifier section
cleared in at least a day after "on/standby" status
power plug is unplugged (ON or STANDBY)
from power outlet
Last input selection
Volume control value
Tone control levels
AUX input level
Balance setting
Tuner section
Receiving band
Frequency
Preset stations
Auto/mono setting
Program timer setting
contents
Note related to transportation and movement
Before transporting or moving this unit, carry out the
following operations.
1 Remove the CD from the unit.
Cassette deck unit
Transport direction
"tape EQ."
2 Press the 6 key of the CD.
3 Wait for some time and verify that the display
Reverse mode
Kwldgsection
becomes as shown in the figure.
PM
MHz BEST HITS O.T
WARNING NOTICE:
C D J N O T D I S C •
IN MOST CASES IT IS AN INFRINGEMENT OF COPY-
RIGHT TO MAKE COPIES OF TAPES OR DISCS WITH-
OUT THE PERMISSION OF THE COPYRIGHT OWNERS.
ANYONE WISHING TO COPY COMMERCIALLY AVAIL-
ABLE TAPES OR DISC SHOULD CONTACT THE ME-
CHANICAL COPYRIGHT PROTECTION SOCIETY LIM-
ITED OR THE PERFORMING RIGHTS SOCIETY LIMITED.
4 Wait a few seconds and turn the unit OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
In case of difficulty
HM-331 (En/T)
What seems to be a malfunction is not always so. Before calling for service, check the following table
according to the symptom of your trouble.
Operation to reset
The microcomputer may fall into malfunction (impos-
Unplug the power cord from the power outlet then,
sibility to operate, erroneous display, etc.) when the
while holding the “set/demo” key depressed, plug
power cord is unplugged while unit is ON or due to
the power cord again.
an external factor. In this case, execute the following
procedure to reset the microcomputer and return it
to normal condition.
set/demo
÷ Please note that resetting the microcomputer clears
the contents stored in and it returns to condition when
it left the factory.
2
2
Amplifier section/Speakers
Symptom
Cause
Remedy
Sound is not produced.
÷ The speaker cords are disconnected.
÷ Connect properly referring to “System
c
onnection”.
6
%
÷ The volume control is set to the mini- ÷ Adjust to an required volume.
mum position.
÷ The MUTE key of remote control unit is ÷ Switch MUTE OFF.
switched ON.
÷ The headphone plug is inserted into the ÷ Unplug the headphone plug.
jack.
÷ The speaker cords are short-circuited.
÷ Turn the unit OFF, remove the short-
circuit and turn the unit ON again.
No sound from the head- ÷ Imperfect insertion.
÷ Insert correctly.
%
phones.
Sound is not produced from ÷ The speaker cords are disconnected.
÷ Connect properly referring to “System
connection”.
the left or right speakers.
6
fl
÷ The BALANCE is set completely to the ÷ Adjust the optimum left and right bal-
left or right channel.
ance.
Tuner section
Symptom
Cause
Remedy
The clock display blinks with- ÷ There was a power failure.
÷ Adjust the present time again.
°
q
out changing the figures.
÷ Thepowercordwasunpluggedfromthe ÷ Adjust the present time again.
outlet.
Timer operation is not pos- ÷ The present time has not been adjusted ÷ Adjust the present time referring to
sible.
or there was a power failure.
“Clock adjustment”.
÷ The timer ON time and OFF time have ÷ Set the timer ON time and OFF time.
not been set.
÷ The timer execution was not set up.
÷ Press the TIMERkey to set up the execu-
tion.
Radio stations cannot be re-
ceived.
÷
The antennas have not been connected.
÷ Connect antennas.
6
)
÷ Aproperbroadcastingbandhasnotbeen ÷ Select a band.
selected.
÷ The frequency of the station to be re- ÷ Tune to the frequency of the desired
ceived is not tuned.
station.
Noise interferes.
÷ Car ignition noise.
÷ Install the outdoor antenna in an apart
position from the road.
÷ Influence of an electric appliance.
÷ A TV set is installed near the system.
÷ Switchthesuspectedelectricappliance
OFF.
÷ Install the TV or the system at an in-
creased distance between them.
A station has been preset but ÷ The frequency of the preset station is ÷ Preset stations with tunable frequen-
Klwdgsection
it cannot be received by press-
ing the P.CALL key.
not tunable.
cies.
÷ The preset memory has been cleared ÷ Preset stations again.
¡
because the power cord has been un-
plugged for a long period.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
In case of difficulty
HM-331 (En/T)
CD player section
Symptom
Cause
Remedy
A CD is placed in the player but ÷ The disc is placed upside down.
it cannot be played.
÷ Place the disc properly, with the label
side facing upward.
÷ The disc position is displaced.
÷ Place the disc properly.
÷ The disc is extremely dirty.
÷ Clean the disc referring to “Disc han-
dling precautions”.
5
e
÷ The disc is scratched.
÷ Try another disc.
÷ Dew is condensed on the optics lens.
÷ Referto“Cautiononcondensation”and
remove the condensation by evaporation.
Sound is not produced.
Sound skips.
÷ The disc has not been placed.
÷ Place a disc in the CD player.
÷ The player is not put to the play mode. ÷ Press the 6 key.
÷ The disc is extremely dirty.
÷ The disc is scratched.
÷ The disc is dirty.
÷ Clean the disc referring to “Disc han-
dling precautions”.
5
5
÷ Try another disc.
÷ Clean the disc referring to “Disc han-
dling precautions”.
÷ The disc is scratched.
÷ Try another disc.
÷ The player is subject to vibration.
÷ Install the unit in a place not subject to
vibrations.
Remote control unit
Symptom
Cause
Remedy
÷ Batteries are exhausted.
÷ Replace with new batteries.
#
#
Remote control operation is
not possible.
÷ The remote control is too far away from ÷ Operate the unit inside the remote con-
the system, the controlling angle is devi-
ated or there is an obstacle in between.
trollable range.
÷ Thecomponenttobeplayedisnotloaded ÷ Load a CD or cassette tape in the com-
with a CD or cassette tape. ponent to be played.
Kwldgsection
Download from Www.Somanuals.com. All Manuals Search And Download.
46
In case of difficulty
HM-331 (En/T)
Cassette deck
Symptom
Cause
Remedy
Sound cannot be produced by ÷ The head is dirty.
÷ Clean the head referring to “Mainte-
pressing the play key.
nance”.
e
*
÷ The tape is wound too tight due to ÷ Try another tape.
irregular winding.
÷ A nonrecorded tape is played.
÷ Play a recorded tape.
No operation occurs even ÷ The cassette holder is not closed com- ÷ Close the holder completely.
when an operation key is
pressed.
pletely.
÷ The operation key is pressed immedi- ÷ Press operation keys in more than a few
ately after closing the cassette holder.
secondsafterclosingthecassetteholder.
÷ The operation key is pressed in less than ÷ Press operation keys after waiting for
4 seconds after turning the power ON.
more than 4 seconds.
÷ Insert a tape.
÷ A tape is not inserted in the unit.
*
*
r
e
÷ The tape is wound too tight due to ÷ Try another tape.
irregular winding.
÷ The tape is fully wound to one of the ÷ Change the tape transport direction or
reels.
reverse the tape insertion orientation.
The cassette holders cannot ÷ The key is pressed during recording or ÷ Press in stop mode.
be opened by pressing the “0
playback.
push OPEN” area.
÷ The microcomputer is malfunctioning ÷ Reset the microcomputer.
due to external noise.
Sound is harsh or high fre- ÷ The head is dirty.
÷ Clean the head referring to “Mainte-
nance”.
÷ Try another tape.
quencies are not reproduced.
÷ The tape is stretched or shrunk.
Sound is distorted.
Noise is noticeable.
÷ The recording level has not been ad- ÷ Adjust the AUX input level.
justed. (During AUX input operation)
÷ The tape being played was recorded ÷ Try another tape.
with distorted sound.
÷ The tape head is magnetized.
÷ Demagnetizetheheadreferringto“Main-
tenance”.
e
(
÷ External noise is induced.
÷ Install the system at a distance from
other electric appliances and TV.
÷ A tape recorded with Dolby NR ON is ÷ Set the "tape EQ." to on.
played with "tape EQ." off.
Sound vibrates.
÷ The capstans or pinch rollers are dirty. ÷ Clean the head referring to “Mainte-
nance”.
e
(
÷ The tape is wound irregularly.
÷ Wind the tape again by fast forwarding,
rewinding or playing from an end to the
other.
Recording cannot be started ÷ The recording protect tab of the cas- ÷ Use a cassette with an unbroken record-
by pressing the record key.
sette has been broken.
ing protect tab or block the hole.
5
*
÷ The cassette holder is not closed com- ÷ Close the holder completely.
pletely.
÷ The TAPE input is selected.
÷ Set the input selector to the source to be
recorded.
£
*
÷ Thetapeisfullywoundtooneofthereels. ÷ Change the tape transport direction or
reverse the tape insertion orientation.
Klwdgsection
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Specifications
Caution : Read this page carefully to ensure safe operation.
HM-331 (En/T)
Main unit
Speakers
Enclosure ...... Book shelf type, magnetically shielded
Speaker configuration
[Amplifier section]
Effective output power during STEREO operation
1 kHz, 10 % T.H.D., at 6 Ω ................... 15 W + 15 W
Rated output power during STEREO operation
Other countries
1 kHz, 0.7 %T.H.D., at 6 Ω .................. 12 W + 12 W
Frequency response
Woofer....................................... 100 mm, cone type
Tweeter ....................................... 50 mm, cone type
Impedance ................................................................ 6 Ω
Maximum input level............................................. 20 W
Dimensions .................................................. W : 150 mm
H : 255 mm
AUX .............................. 20 Hz~20 kHz (0 dB ~ -3dB)
D : 240 mm
Weight (net) ............................................ 2.4 kg(1 piece)
[Tuner section]
FM tuner section
Tuning frequency range.......... 87.5 MHz ~ 108 MHz
MW (AM) tuner section
Tuning frequency range
9 kHz step ............................ 531 kHz ~ 1,602 kHz
10 kHz step .......................... 530 kHz ~ 1,610 kHz
[CD player section]
Laser ..............................................Semiconductor laser
D/A Conversion ....................................................... 1 Bit
Frequency response................................ 20 Hz~20 kHz
Wow and flutter ........... Less than unmeasurable limit
[Cassette deck section]
Track ....................................... 4-track, 2-channel stereo
Recording system .................................AC bias system
(Frequency: 65 kHz)
Heads
Playback / recording head ...................................... 1
Erasing head ............................................................. 1
Motors............................................................................ 1
Wow and flutter ................................. 0.2 % (W.R.M.S.)
Fast winding time ....................... Approx. 100 seconds
(C-60 tape)
[General]
Power consumption.............................................. 36 W
Dimensions ................................................. W : 180 mm
H : 257 mm
D : 275 mm
Weight (net) .......................................................... 5.1 kg
Kwldgsection
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be
changed without notice.
NNootteess
÷ Sufficient performance may not be exhibited at extremely cold locations (where water freezes).
Download from Www.Somanuals.com. All Manuals Search And Download.
For your records
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for informa-
tion or service on this product.
Model
Serial Number
Download from Www.Somanuals.com. All Manuals Search And Download.
|