DVD-RECEIVER
KDV-412
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new DVD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KDV-412 Serial number
US Residence Only
Register Online
Register your Kenwood product at
© B64-3435-00/02 (KW)
Download from Www.Somanuals.com. All Manuals Search And Download.
How to read this manual
Safety precautions
Notes
Menu
Menu setup
Setting security code
Clearing security code
Security code entry
Adjusting the clock
HD Radio Receive mode setting
AUX name select
Demonstration setup
Audio preset
Recalling audio preset values
T.I (Traffic Information)
48
48
50
50
51
52
52
53
54
54
55
56
Handling media
Basic Operation
Watching DVD/VCD/Video files
DVD setup
Listening to Music Discs & Audio Files
Select Mode
Remote Controller
58
58
58
59
60
61
Battery installation
Remote Controller mode switch
Common operations (AUD mode)
DVD/VCD/CD/Audio files (DVD mode)
Radio (AUD mode)
Watching picture files
Listening to Radio
RDS Control
Help? Playing files
Audio files
Video files
62
62
64
64
Picture files
Audio Control
Help? Troubleshooting
General
Playing discs
Audio files
HD Radio source
Menu
65
65
66
67
67
67
TEL Mute Control
Display Control
Help? Term
General
Audio control
Menu
68
68
68
69
Menu
HD Radio Control
Remote Controller
Help?
Help? Error
71
DVD language codes
Accessories/ Installation Procedure 73
72
Connections
Installation
Specifications
74
76
78
DVD language codes
Accessories
Connections
Installation
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
How to read this manual
This manual uses illustrations to explain its
operations.
Tuning mode
Sets a tuning mode for selecting stations.
The displays and panels shown in this manual
are examples used to provide clear explanations
of the operations.
1
Set to the menu mode
For this reason, they may be different from the
actual displays or panels used, or some display
patterns may be different.
VOL
/PTY
DISP
AUD
SETUP
M/S
SCAN
SW
SRC
AM
Q
MENU
STOP
RDM
REP
F. SEL
M.RDM
OFF
MENU
2
Select a tuning mode
There are three types in the tuning mode.
Display
Setting
AUTO1
Receives stations with the best reception.
(Auto 1)
AUTO2
Receives the stations memorized. (Auto 2)
MANUAL
Switches the receiving frequencies up and
down at a step at a time. (Manual)
3
Display the CD player menu
4
Exit the menu mode
VOL
/PTY
DISP
AUD
SETUP
M/S
SCAN
SW
SRC
AM
Q
MENU
STOP
RDM
REP
F. SEL
M.RDM
OFF
The above operation example with the mark
differs from the actual operation.
4
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
"DTS" and "DTS 2.0 + Digital Out" are trademarks of
Digital Theater Systems, Inc.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
is a trademark of DVD Format/Logo Licensing
Corporation registered in the U.S., Japan and other
countries.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is
prohibited.
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
NOTE
This Class B digital apparatus complies with
Canadian ICES-003.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to laser product safety.
KENWOOD CORPORATION
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI
TOKYO, JAPAN
KENWOOD CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS N0.21 CFR
1040. 10, CHAPTER 1, SUBCHAPTER J.
Location : Bottom Panel
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless
the modifications are expressly approved in the
instruction manual. The user could lose the authority
to operate this equipment if an unauthorized change
or modification is made.
NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment may cause harmful interference to radio
communications, if it is not installed and used in
accordance with the instructions. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
6
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
About CD players/disc changers connected
to this unit
Kenwood disc changers/CD players released in 1998
or later can be connected to this unit.
Refer to the catalog or consult your Kenwood dealer
for connectable models of disc changers/CD players.
Note that any Kenwood disc changers/CD players
released in 1997 or earlier and disc changers made by
other makers cannot be connected to this unit.
Connecting unsupported disc changers/CD players to
this unit may result in damage.
2WARNING
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
• Mounting and wiring this product requires skills and
experience. For safety’s sake, leave the mounting
and wiring work to professionals.
Set the "O-N" Switch to the "N" position for the
applicable Kenwood disc changers/CD players.
The functions you can use and the information
that can be displayed may differ depending on the
models being connected.
Attach the panel while you are on the
vehicle
The panel lock arm appears when the panel is
removed. Therefore, the panel must be attached
while the electrical system of the car is operating.
•
You can damage both your unit and the CD changer if you
connect them incorrectly.
2CAUTION
To prevent damage to the machine, take
the following precautions:
• Make sure to ground the unit to a negative 12V DC
power supply.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
• Do not place the faceplate (and the faceplate case)
in areas exposed to direct sunlight, excessive heat
or humidity. Also avoid places with too much dust
or the possibility of water splashing.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
unit. Called lens fogging, this condensation on the
lens may not allow DISC to play. In such a situation,
remove the disc and wait for the condensation to
evaporate. If the unit still does not operate normally
after a while, consult your Kenwood dealer.
• To prevent deterioration, do not touch the terminals
of the unit or faceplate with your fingers.
• Do not subject the faceplate to excessive shock, as
it is a piece of precision equipment.
• When replacing a fuse, only use a new fuse with
the prescribed rating. Using a fuse with the wrong
rating may cause your unit to malfunction.
• Do not apply excessive force to the open faceplate
or place objects on it. Doing so will cause damage
or breakdown.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check
with your Kenwood dealer to make sure that they
work with your model and in your area.
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
<Demonstration setup> (page 54).
• If the unit fails to operate properly, press the Reset
button. The unit returns to factory settings when
the Reset button is pressed.
• Press the Reset button if the disc auto changer fails
to operate correctly. Normal operation should be
restored.
About SIRIUS Satellite radio tuner
Refer to the instruction manual of SIRIUS Satellite
radio tuner KTC-SR901/SR902/SR903 (optional
accessory), when connected, for the operation
method.
• Refer to the sections of A models for operations.
FM/
SCRL
4
AUTO
¢
M/S
STOP
Reset button
M/S
STOP
• We recommend the use of <Setting security code>
(page 50) to prevent theft.
• The characters which can be displayed by this unit
are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { }
| ~ .
• The RDS feature won’t work where the service is not
supported by any broadcasting station.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display of the actual equipment, and some of the
illustrations on the display may be inapplicable.
AM SRC DISP/C.S.
1 - 6
About DAB Tuner control
Refer to A group on the Instruction manual of DAB
Tuner KTC-9090DAB (optional accessory) for the
control method of DAB Tuner function.
However, the following control methods of the
function for this unit may be different from the
descriptions given in the Instruction manual;
therefore, refer to the following supplemental
instruction.
<Auto Ensemble Memory Entry>
1. Select the preset band for Auto Ensemble
Memory Entry.
2. Press the [AME] button for at least 2 seconds.
Open Auto Ensemble Memory Entry.
After storing in the memory is completed, the
number of the pre-set buttons and the ensemble
label are displayed.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
<Searching by programme type and language>
At the operation to press [DISP] button, use [AUTO]
button instead.
•
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty,
wipe them with a clean soft dry cloth.
8
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Region codes in the world
The DVD players are given a region code according to the country or area it is marketed, as shown in the
following map.
1
5
2
1
2
1
4
5
2
4
DVD disc marks
Operation regulatory marks
With this DVD, some functions of this unit such as the
play function may be restricted depending on the
location where the DVD is playing. In this case, the
following marks will appear on the screen. For more
information, refer to the disc manual.
Symbol
Description
Indicates a region number. The discs with this mark can
be played with any DVD player.
ALL
Indicates the number of audio languages recorded. Up
to 8 languages can be recorded in a movie. You can
select a favorite language.
Prohibition Mark
禁止マーク
8
Indicates the number of subtitled languages recorded.
Up to 32 languages can be recorded.
32
Discs with limited period of use
Do not leave discs with a limited period of use in this
unit. If you load an already expired disc, you may not
be able to remove it from this unit.
If a DVD disc has scenes shot from multiple angles, you
can select a favorite angle.
9
Indicates the type of screen for the image. The left mark
indicates that a wide image picture (16:9) is displayed
on a standard TV set screen (4:3) with a black band at
both the top and bottom of the screen (letter box).
16:9 LB
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
List of playable discs
Use of "DualDisc"
When playing a "DualDisc" on this unit, the surface
of the disc that is not played may be scratched
while the disc is inserted or ejected. Since the music
CD surface does not conform to the CD standard,
playback may be impossible.
Disc
types
DVD
Standard
Support
Remark
‡
×
‡
DVD Video
DVD Audio
DVD-R
MP3/WMA/JPEG/MPEG
Playback
VR mode/Multi-border/
Multisession/CPRM not
supported
(Playback depends on
authoring conditions)
Compatible with 8-cm (3
inch) discs
(A "DualDisc" is a disc with one surface containing
DVD standard signals and the other surface
containing music CD signals.)
‡
‡
‡
DVD-RW
DVD+R
DVD+RW
DVD-R DL (Double layer)
DVD+R DL (Double layer)
DVD-RAM
×
×
×
‡
CD
Music CD
CD-TEXT/8-cm (3 inch)
discs supported.
MP3/WMA/JPEG playback
Multisession supported
Packet write not supported.
‡
‡
‡
‡
‡
×
CD-ROM
CD-R
CD-RW
DTS-CD
Video CD (VCD)
Super video CD
Photo CD
×
%
CD-EXTRA
Only music CD session can
be played.
Sound quality of normal
CD music
%
HDCD
CCCD
×
×
%
Others
Dualdisc
Super audio CD
Only CD layer can be
played.
‡ : Playback is possible.
% : Playback is partly possible.
× : Playback is impossible.
10
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling media
Handling discs
• Do not touch the recording surface of the disc.
Removing discs
When removing discs from this unit pull them out
horizontally.
Discs that can not be used
• Discs that are not round cannot be used.
• CD-R/RW, DVD-R/RW, and DVD+R/RW discs are
easier to be damaged than a ordinary music CD.
Use a CD-R/RW, DVD-R/RW, or DVD+R/RW disc after
reading the cautions on the package.
• Do not stick a tape, sticker, etc., on the disc.
Also, do not use a disc with those materials pasted
on it.
• Discs with coloring on the recording surface or that
are dirty cannot be used.
• This unit can only play the CDs with one of
labels.
When using a new disc
If the disc center hole or outside rim has burrs, use it
after removing them with a ballpoint pen etc.
Discs without the label may not be played on the
unit.
• A CD-R or CD-RW that hasn’t been finalized cannot
be played. (For the finalization process refer to your
CD-R/CD-RW writing software, and your CD-R/CD-
RW recorder instruction manual.)
Burrs
Disc storage
• Do not leave discs place them in direct sunlight
(On the seat or dashboard etc.) and where the
temperature is high.
Burrs
• Put discs in their cases and store them in such a
storage as disc cabinet.
How to eject a disc
When ejecting a disc from this unit, pull it out
horizontally.
If pulled out with a strong downward force, the
recording surface of the disc may be scratched.
Disc shaped accessory
Do not insert a disc shape accessory into the unit.
Disc cleaning
Wipe from the center of the disc to outward.
English
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Common operations
AUTO
AME
FM
SCRL
ATT
A
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
SW
AM
Q
MENU
STOP
RDM
REP
F. SEL
M.RDM
SRC
OFF
C
B
C
B
Turns power ON/OFF
Adjusts audio output level
Press the button to turn on the power.
When the button is pressed and held down for
1 second or more, the power is turned off.
Turns down
Turns up
A
Turns down the volume quickly
Press the button to turn down the volume
(Attenuator).
Press the button again to restore the previous
volume.
• While the attenuator is activated, the
blinks.
indicator
Canceling demonstration mode
The demonstration mode should be canceled
before use. For further information, refer to
<Demonstration setup> (page 54).
12
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
C
Changes a source
A playable source is selected in the following order each time the button is pressed.
Receives FM/AM broadcast. (page 36)
TUNER
DVD
Plays back the disc (DVD/VCD/CD etc) inserted. (page 20/34)
Plays back the disc inserted in an external player, such as a CD changer (optional accessory). (page
30)
CD CH/MD CH
AUX EXT
Outputs a sound signal input to the external AUX terminal (optional accessory).
STANDBY
Although nothing is played back, the clock etc are displayed.
• If no CD/MD changer is connected, the changer source is not selected.
• When a disc is inserted, the disc is played.
• You can play audio files, video files and picture files with DVD source. For details of these media types, formatting or
writing methods, refer to <Help? Playing files> (page 62).
• "AUX EXT" display using KCA-S220A can be switched with <AUX name select> (page 53).
B
Adjusts sound quality and others
Push the knob to select the feature to be adjusted, and turn the knob clockwise/counterclockwise to
adjust the feature.
Features are selected in the following order.
Adjusts the bass volume. (Adjustable range : –8 – +8)
Adjusts the middle volume. (Adjustable range : –8 – +8)
Adjusts the treble volume. (Adjustable range : –8 – +8)
BAS L
MID L
TRE L
BAL
Adjusts the volume balance between the left and the right.
(Adjustable range : Left 15 – Right 15)
Adjusts the volume balance between the front and the rear.
(Adjustable range : Rear 15 – Front 15)
FAD
通常の表示
Normal display
• The features displayed for sound quality adjustment may differ depending on the settings. Detailed setup is also possible.
For further information, refer to <Detailed audio control> (page 40).
• You can easily adjust the sound quality to suit the type of music you are playing. For further information, refer to <System
Q> (page 42).
Å
Ç
• Pressing button, ı button, or any button other than will immediately return to normal display.
English
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Watching DVD/VCD (video CD)/Video (MPEG) files
AUTO
AME
FM
SCRL
ATT
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
SW
AM
Q
MENU
STOP
RDM
REP
F. SEL
M.RDM
SRC
OFF
A
B
C
D
A
I
Playing a DVD/VCD/Video file
Å
Press
button to open the operation panel.
When you load a disc into the disc loading slot, the disc starts playing.
If a menu appears, move the cursor on a feature using the cursor key È, and
select it by pressing the ENTER key È.
Remove a disc
Press [0] (Eject) button.
• Insert the disc horizontally.
• When a disc is inserted, the
indicator lamp turns on.
SRC
• When a disc is already loaded in this unit, you can play it by switching to "DVD" with the
button Î.
• In addition to the DVD videos available on the market, you can view video (MPEG) files recorded on DVDs. For further
information on the types of video files that can be played, disc formats etc, refer to <Video files> (page 64).
• For other playback methods, refer to <Watching DVD/VCD/Video files> (page 20).
• The position of the remote controller switch must be changed according to the source used. For further information,
refer to <Remote Controller mode switch> (page 58).
F
K
Select a chapter/scene/track
Ï
Pressing
key to play back the previous chapter/scene/track.
Pressing
key to play the next chapter/scene/track.
• The same operation is possible by sliding control knob Ç to the left or right.
14
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
I
E
F
"DVD" is selected.
(page 58)
J
K
L
G
H
M
E
J
G
L
Stop play
Fast scan forward/backward
Press
Press
key Ô to stop playing.
key ‰ to resume playing from the
Press
Press
Each time
key Ì for fast backward scanning.
key Ò for fast forward scanning.
key Ì/ key Ò is pressed,
position where play was previously interrupted.
the forward/backward scan speed changes in
3 steps.
• Press
key Ô twice to start playback of a DVD from
the beginning when it is played next.
• Pressing
button ı can also stop playing.
H
M
• Pressing control knob Ç can also resume playing.
Slow play
Press
key ˜ for slow forward play.
E
During DVD playback, press
backward play.
Each time
key Ó for slow
Play/Pause
Press
Press again to resume playing.
key ‰ once to pause.
key ˜/
key Ó is pressed, the
slow play speed changes in 3 steps.
• The same operation is possible by pressing control
knob Ç.
• During driving, the image from the DVD/VCD/video files will not be displayed for safety reasons. The image is displayed
after the vehicle stops and the parking brake is applied.
È
• When on-screen display is shown on the monitor, use the cursor key
operations, turn off the on-screen display.
operating menus. If you want to perform other
English
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Listening to CDs and audio files
AUTO
AME
FM
SCRL
ATT
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
SW
AM
Q
MENU
STOP
RDM
REP
F. SEL
M.RDM
SRC
OFF
A
B
C
D
A
Playing CD/audio files
Å
button to open the operation panel.
Press
When you load a disc into the disc loading slot, it starts playing.
Remove a disc
Press [0] (Eject) button. The disc is ejected.
• Insert the disc horizontally.
• When a disc is inserted, the
indicator lamp turns on.
SRC
• If a disc is already loaded in this unit, you can play it by switching to "DVD" with the
• Apart from normal CDs, you can also play CD-Rs (etc.) with audio files.
button Î.
For further information on the types, formats, and writing methods of playable audio files, refer to <Audio files> (page
62).
• For further information on playing methods, refer to <Listening to Music Discs & Audio Files> (page 30).
16
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
C
C
Fast scan forward/backward
Select a track to play
Ç
Push control knob to the right and hold it
Ç
Move control knob to the right to play the
for fast scanning forward through the track.
next track.
Ç
Push control knob to the left and hold it for
Ç
Move control knob to the left to return
fast scanning backward through the track.
to the start of the current track or play the
previous track.
B
C
C
Stop play
Press
Play/Pause
Press control knob
ı
button to stop playing.
Ç
once to pause.
Press again to resume playing.
Ç
Press control knob to resume playing from
the previous interrupted position.
ı
button twice to start the disc from the
• Press
beginning when it is played next.
English
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Viewing picture (JPEG) files
AUTO
AME
FM
SCRL
ATT
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
SW
AM
Q
MENU
STOP
RDM
REP
F. SEL
M.RDM
SRC
OFF
A
B
C
A
Display picture files
Å
button to open the operation panel.
Press
Insert a disc containing picture files into the loading slot to display the files.
The picture file is displayed for 20 seconds before moving to another picture file.
Remove a disc
Press [0] (Eject) button.
• The length of time the picture file is displayed can be changed. For details on how to set the time, refer to <Monitor
display setup> (page 24).
• Insert the disc horizontally.
• When a disc is inserted, the
• When a disc is already loaded in this unit, you can play it by switching to "DVD" with the
• For further information on the types of displayable picture files, disc formats etc., refer to <Picture files> (page 64).
indicator lamp turns on.
SRC
button Ç.
B
B
Select a picture file to display
Pausing display
ı
ı
Move control knob to the left to display the
Pressing control knob once freezes the
display. When it is pressed again, the picture
file starts changing again, the picture file starts
changing again.
previous picture file.
ı
Move control knob to the right to display
the next picture file.
• During driving, the image from the picture files will not be displayed for safety. The image is displayed after the vehicle
stops and the parking brake is applied.
18
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio
AUTO
AME
FM
SCRL
ATT
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
SW
AM
Q
MENU
STOP
RDM
REP
F. SEL
M.RDM
SRC
OFF
A
B
B
Changing the radio band
ı
ı
Move control knob downwards to change
the radio band to AM.
Move control knob up to change the radio
bands as follows:
FM band 1
FM band 2
FM 1
FM 2
FM 3
FM band 3
• The
indicator turns on during stereo reception.
• For various other tuning methods, refer to <Listening to Radio> (page 36).
B
A
Selecting a radio station
Receive a preset radio station
ı
Move control knob left or right to
Press a button to select the station memorized.
automatically search for the best reception of a
radio station.
• To use the preset tuning function with Å, you need
to preset a radio station for each button in advance.
For detail on how to memorize stations, refer to <Auto
memory> (page 36) or <Manual memory> (page 36).
• Depending on the tuning mode, you can change the
frequency step by step, or receive each memorized
radio station sequentially. For further information, refer
to <Tuning mode> (page 37).
English
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching DVD/VCD/Video files
You can play DVD/VCD/Video files using various functions.
•
•
For the basic method of how to watch DVD/VCD/Video files, refer to <Watching DVD/VCD (video CD)/Video (MPEG) files>
(page 14).
Set the remote controller mode switch to "DVD" mode before starting operation, refer to <Remote Controller mode switch>
(page 58).
Frame-by-frame playback
Repeat play
Plays back by moving frame by frame.
Repeats the chapter or track being played.
1
Pause playback
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F. SEL
M.RDM
OFF
AUTO
AME
FM
SCRL
ATT
VOL
C.S.
SP
AUD
SETUP
M/S
A
While playing DVDs
Display
Status
Title repeat ON
Chapter repeat ON
Repeat play OFF
2
Play back frame by frame
"TITL REP"
"CHAP REP"
"REP OFF"
While playing VCDs
Display
"TRAC REP"
"REP OFF"
Status
Track repeat ON
Repeat play OFF
Move control knob to the right to move
forward frame by frame.
Move control knob to the left to move
backward frame by frame.
While playing video files
Display
Status
•
When playing back a video file, playing frame-by-frame
backward is disabled.
"FILE REP"
"FOLD REP"
"REP OFF"
File repeat ON
Folder repeat ON
Repeat play OFF
•
The VCD repeat play function is enabled when the PBC is
set to OFF.
For further information on PBC setting, refer to <PBC
setup> (page 23).
20
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing audio channel
(Only for VCD)
Changing subtitle language
(Only for DVD)
Sets up the audio channel.
Changes the subtitle language.
The setting changes as follows each time the
key is pressed.
The language changes each time the key is
pressed.
Display
"LL"
Setting
Only left audio channel is output.
Only right audio channel is output.
Stereo sound is output.
•
On some discs you cannot change the subtitle language
using this button. In this case, change it from the DVD
menu or the DVD setup.
"RR"
"ST"
•
The audio channel can also be changed by pressing
on the main unit.
Changing viewing angle
(Only for DVD)
Selects a viewing angle.
Changing sound track language
(Only for DVD)
When the angle mark ...
Changes the sound track language.
The angle changes each time the key is
pressed.
The language changes each time the button
is pressed.
•
On some discs you cannot change the angle using this
button. In this case, change it from the DVD menu or the
DVD setup.
•
On some discs you cannot change the language using
this button. In this case, change it from the DVD menu or
the DVD setup.
English
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching DVD/VCD/Video files
Zoom
DVD menu (Only for DVD)
Enlarges and displays the screen image.
Sets the DVD menu.
1
1
Set the zoom ratio
Display a DVD menu
The magnification ratio changes in 3 steps each
time the key is pressed.
2
Select a feature
2
Select a display position
The cursor moves in the direction of the arrow
pressed. Move the cursor to the desired feature.
For the DVD menu, also refer to the DVD
operation manual.
The display position moves in the direction of
the arrow pressed.
3
Determine the feature
•
Zooming may not be possible with some discs, or zoom
may be canceled in some scenes.
To cancel the menu …
To return to the first menu feature …
•
Switching to the first menu feature with
possible with some discs.
may not be
22
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
PBC setup (Only for VCD)
Sets up PBC (Play Back Control).
Each time the key is pressed, the PBC function
turns ON/OFF.
English
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD setup
Sets up display (etc.)-related functions.
•
•
•
For the basic method of how to watch DVD/VCD/Video files, refer to <Watching DVD/VCD (video CD)/Video (MPEG) files>
(page 14).
Set the remote controller mode switch to "DVD" mode before starting operation, refer to <Remote Controller mode switch>
(page 58).
Perform this setting without a disc being loaded in this unit.
4
Set up the features
Monitor display setup
Specifies the information etc to be displayed on
the monitor.
1
Set to Setup mode
Status Information
Turns the status and icon display ON/OFF.
Display
"ON"*
"OFF"
Setting
Displayed
Not displayed
2
Open the display menu
Background
Selects one of 2 types of wallpapers.
Display
"Type1"*
"Type2"
Setting
Type 1
Type 2
Audio Information
Turns text information display ON/OFF.
Display
"ON"*
"OFF"
Setting
Displayed
Not displayed
JPEG SETUP MENU
Display Time
Specifies the length of time for which JPEG
images are displayed.
3
Select features to set
Display
"Short"
"Middle"*
"Long"
Setting
Displayed for 10 seconds
Displayed for 20 seconds
Displayed for 30 seconds
Select additional features for JPEG setup.
24
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Effect
Turns visual effects ON/OFF.
Display
"ON"*
"OFF"
Setting
Visual effects are added.
Visual effects are not added.
3
Set up the features
* Indicates default configuration status after purchase.
5
Exit the setup
Dynamic Range
Specifies the audio dynamic range when a title
supporting Dolby digital is playing.
Display
Setting
"Wide"*
Sets to wide range
"Normal"
"Midnight"
Sets to narrow range
* Indicates default configuration status after purchase.
4
Exit the setup
After
is selected on each screen the
previous screen appears.
Audio setup
Sets up the DVD audio functions.
1
Set to Setup mode
2
Open the audio menu
After
is selected on each screen the
previous screen appears.
English
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD setup
4
Exit the setup
CD player setup
Sets up the CD player for playback.
1
Set to Setup mode
2
Display the CD player menu
After
is selected on each screen the
previous screen appears.
DVD player setup
Sets up the languages, display, etc. for DVD
playback.
1
Set to Setup mode
3
Set up the features
2
Open the DVD player menu
CD Read
Specifies the method for reading a CD.
Display
Setting
1*
Audio file discs and music CDs are identified
automatically.
2
It overrides to play the disc as a CD.
* Indicates default configuration status after purchase.
26
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Type
3
Select features to set
Sets the picture aspect ratio 16:9 according to
the TV type.
Display
Setting
16:9
A 16:9 monitor displays a 16:9 picture.
Select additional features for language
setup.
Letter Box
A 4:3 monitor displays the picture in letter
box style (A black band appears at the top
and bottom of the screen).
4
Set up the features
Language
Pan Scan
A 4:3 monitor displays the picture in Pan
Scan style (The left and right edges of the
picture will be cut off).
Sets up the subtitles displayed, audio, etc. for
DVD playback.
For further information on the setting method,
refer to <Language setup> (page 28) .
Parental
Sets up a parental level.
For the setup method, refer to <Parental level
setup/change> (page 29).
5
Exit the setup
After
is selected on each screen the
previous screen appears.
English
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD setup
4
Exit the setup
Language setup
Sets up the DVD subtitle and audio menu
languages.
1
Display the language menu screen
Refer to <DVD player setup> (page 26).
After
and
are selected on
each screen the previous screen appears.
2
Select language features to set
Display
Setting
"Audio Language"
"Subtitle Language"
"Menu Language"
Sets the audio language.
Sets the subtitle language.
Sets the menu language.
3
Enter a language code
For the language code, refer to <DVD language
codes> (page 72).
Display
Setting
"Original"
Sets the DVD's original language (only when
setting an audio language).
"Return"
"Clear"
Cancels the setup and returns to the previous
screen.
Clears the code entered.
28
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Code No.
Parental level setup/change
This needs to be entered when changing the
password for the parental level.
Enter a 4-digit password, and select
Changes the parental level and password for discs
and scenes.
.
1
Display the Parental screen
4
Exit the setup
Refer to <DVD player setup> (page 26).
When setting it for the second time and after,
the message "Input Code No." will be displayed.
2
Enter a 4-digit password, and select
After
and
are selected on
each screen the previous screen appears.
3
Select features to set
•
•
Resetting this unit will clear the parental level and
password.
Some discs may require you to enter a password before
a scene appears that has a parental level higher than
specified. In this case, the playback resumes when you
enter the password.
Level
Set the parental level.
•
If the disc being played has no parental level, playback is
not restricted.
Display
"OFF"
"1"
Setting
Parental level is not set.
Parental level High
"8"
Parental level Low
English
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Music Discs & Audio Files
You can play CDs and audio files using various functions of this unit and the optional disc changer.
•
For the basic operation of how to listen to CDs and audio files, refer to <Listening to CDs and audio files> (page 16).
Disc/Folder search
Scan play
(Only for audio files and disc changers)
Searches for a track/file by scanning the first 10
seconds of each track/file in a disc/folder.
Selects a disc or folder to play.
Start scan play
1
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F. SEL
M.RDM
OFF
•
•
The disc search is enabled when the disc changer
(optional accessory) is used.
For further information on folder search, refer to <Audio
files> (page 62).
TRAC SCN
FILE SCN
(while playing a CD)
(while playing an audio file)
When you get to a track/file you want to
hear ...
2
Repeat play
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
AM
SW
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
Repeatedly plays back the track being played or
the tracks/music files in a disc/folder.
SRC
OFF
VOL
Scanning ends and playback of the track/file
starts.
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
AM
SW
Q
MENU
STOP
RDM
REP
F. SEL
M.RDM
SRC
OFF
•
After all tracks/files are scanned and played, the scan play
ends automatically.
Pressing the button turns the following
functions ON/OFF in the following order.
While playing CDs
Display
Status
"TRAC REP"
"DISC REP"*
"REP OFF"
Track repeat ON
Disc repeat ON
Repeat play OFF
* Only for disc changer
While playing audio files
Display
Status
"FILE REP"
"FOLD REP"
"REP OFF"
File repeat ON
Folder repeat ON
Repeat play OFF
30
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
#
: Press for # seconds.
Random play
Title/Text scroll
Performs random playback of the tracks/files in a
CD/folder.
Scrolls titles/text.
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
AM
SW
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
OFF
DISC RDM
FOLD RDM
(while playing a CD)
(while playing an audio file)
•
The following title/text can be scrolled.
- Disc titles/Track titles
- Song titles/Album titles/Folder names/File names
Titles/text displayed on the monitor will not scroll with
this operation.
•
•
Each time the button is pressed, the random
play mode is alternately turned ON/OFF.
If "DISP" is set to "OFF" in the <Menu setup> (page 48),
the display may be turned off during scrolling.
•
Move control knob to the right to randomly select the
next track/file.
Magazine random play
(Only for disc changer)
Randomly plays the tracks in the discs inside the
disc changer.
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
AM
SW
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
OFF
MGZN RDM
Each time the button is pressed, the magazine
random play mode is alternately turned ON/
OFF.
•
Move control knob to the right to randomly select the
next track/file.
English
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Select Mode
You can select a desired audio file or video file/picture by specifying a file number or folder name. Unlike
the disc search and folder search, the file to be played will not change until the file/the folder is confirmed.
•
In select mode, audio files, video files, and picture files can only be operated during playback.
Select mode
File select
Selects a file from a folder being played according
to a specified file number.
1
Set to Select mode
VOL
1
Set to the file select mode
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
The name of the first file in the folder is
displayed.
For details on how to select the mode, refer to
<Select mode> (page 32).
FILE SEL
2
Select the Select mode
2
Enter a file number
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
The select mode changes in the following
order each time the button is pressed.
Display
Setting
"FILE SEL"
"FLD SEL1"
"FLD SEL2"
Normally
File select mode
Folder select 1 mode
Folder select 2 mode
Select mode OFF
Control knob operation
Increment/decrement file
number
+10
–10
+1
Up
Down
Right
Left
3
Select a file or folder
–1
For detailed operation methods, refer to <File
select> (page 32), <Folder select 1> (page 33),
and <Folder select 2> (page 33).
The name of the file whose file number you
entered is displayed.
3
Play the file displayed
AUTO
AME
•
•
•
During <Scan play> (page 30) or <Random play> (page
31), you cannot select the file select mode.
For details on how to use the select mode, refer to
<Audio files> (page 62).
Titles can be scrolled even in the select mode. For further
information, refer to <Title/Text scroll> (page 31).
FM
SCRL
ATT
VOL
C.S.
SP
AUD
SETUP
M/S
32
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Folder select 1
Folder select 2
Searches for a folder in the order of the media
directory. This method is useful if audio files are
sorted in folders by category and artist.
Selects folders in their order.
Only folders containing playable audio files are
displayed.
1
1
Set to the folder select 1 mode
Set to the folder select 2 mode
For details on how to select the mode, refer to
<Select mode> (page 32).
For details on how to select the mode, refer to
<Select mode> (page 32).
2
2
Select a folder
Select a folder
To select a folder in the same directory ...
Each time you move the knob to the left moves
you to the previous folders and moving the
knob to the right moves you can move to the
following folders.
Each time you move the knob to the left moves
you to the previous folders and moving the
knob to the right moves you can move to the
following folders.
To display the name of files contained in the
folder shown ...
To move to another directory ...
Each time the knob is moved up, the next
higher level folder names are displayed. While
Each time you move the knob up moves you
to the next lower folder level and moving the
knob down moving to the next higher folder
level.
higher level folders are displayed, " " appears.
*
If the knob is moved down, the next lower-
level folder names are displayed.
3
To move back to the 1st level ...
Play the folders displayed
AUTO
AME
FM
SCRL
ATT
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
AM
SW
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
OFF
VOL
/C.S.
ISP
AUD
SETUP
M/S
3
Plays the folder displayed
•
Even when the next higher level folder name is displayed,
the folder playing is the folder currently selected (not
AUTO
AME
FM
SCRL
ATT
marked " "). The folder currently selected will not change.
*
VOL
/C.S.
ISP
AUD
SETUP
M/S
English
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching picture files
You can display picture files using various functions.
•
For the basic method of how to view picture files, refer to <Viewing picture (JPEG) files> (page 18).
Repeat play
Scan play
Repeatedly displays the picture file being
watched or the files in a folder.
Displays and scans pictures in a folder for 10
seconds one at a time.
1
Start scan play
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
Pressing the button turns the following
functions ON/OFF in the order given below.
FILE SCN
Display
Status
"FILE REP"
"FOLD REP"
"REP OFF"
File repeat ON
Folder repeat ON
Repeat play OFF
2
From a desired file ...
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
The scan play ends and playback starts from
the file.
•
After all files are scanned and played, the scan play ends
automatically.
34
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Random play
Rotate/flip a picture
Performs random display of the picture files in the
displayed folder.
Rotates or flips a picture.
Rotate to the right
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
AM
SW
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
OFF
Each time the button is pressed, the picture
rotates 90 degrees clockwise.
FOLD RDM
The random play mode is turned ON/OFF
alternately each time the button is pressed.
Rotate to the left
•
Move control knob to the right to randomly select the
next file.
Each time the button is pressed, the picture
rotates 90 degrees counterclockwise.
Stop display
Stop displaying picture files.
Flip horizontally
Resume display
Press again to restore to the previous picture.
Flip vertically
Resumes display from the position where
display was stopped.
Press again to restore to the previous picture.
•
•
Press the
beginning of the disc.
Press the
key twice to display the pictures from the
button of the unit can also stop display.
Press control knob to resume display.
English
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Radio
Receives FM/AM broadcasts. You can memorize up to 6 stations in each radio band.
•
For the basic method of how to listen to FM/AM broadcasts, refer to <Listening to radio> (page 19).
Auto memory
Manual memory
Scans to automatically memorize stations with
the best reception.
Memorizes the stations received.
1
2
3
Select a radio band
1
Select a radio band
Select a radio station
2
Start auto memory
AUTO
AME
FM
SCRL
ATT
VOL
PTY/C
SW
DISP
AUD
SETUP
M/S
SCAN
M
Q
MENU
STOP
RDM
REP
F
SEL
M
RDM
Select a button (1–6) to preset
A-MEMORY
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
•
The auto memory ends after 6 stations have been
memorized or the whole frequency has been scanned.
FM1-92.1 3ch
•
This function is useful to memorize a station that cannot
be memorized with the auto memory function.
36
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
#
: Press for # seconds.
Tuning mode
Sets a tuning mode for selecting stations.
1
Select a tuning mode
AUTO
AME
FM
SCRL
ATT
VOL
PTY
SW
DISP
AUD
SETUP
M/S
AM
The mode changes in the following order each
time the button is pressed.
Display
Setting
"AUTO 1"
Receives stations with the best reception.
(Auto 1)
"AUTO 2"
Receives the stations memorized. (Auto 2)
"MANUAL"
Switches the receiving frequencies up and
down a step at a time. (Manual)
English
37
Download from Www.Somanuals.com. All Manuals Search And Download.
RDS Control
Controls the reception RDS broadcast station programs.
No
21.
22.
23.
24.
25.
26.
Program Type
Religious Music
Religious Talk
Personality
Public
Display
PTY (Program Type)
"REL MUSC"
"REL TALK"
"PERSNLTY"
"PUBLIC"
"COLLEGE"
"WEATHER"
Selects the Program Type and searches for a
station.
1
Enter PTY mode
College
Weather
AUTO
AME
FM
SCRL
ATT
VOL
C.S.
SP
AUD
SETUP
M/S
3
Search for a station with the selected
Program Type
SPEECH
PTY
2
Select the Program Type
When you want to search for other stations
Each time the button is pressed, the type
changes in the following order.
No
1.
2.
Program Type
Speech
Music
Display
"SPEECH"
"MUSIC"
4
Exit PTY mode
AUTO
AME
3.
News
"NEWS"
FM
SCRL
ATT
4.
5.
6.
Information
Sports
Talk
"INFORM"
"SPORTS"
"TALK"
VOL
C.S.
ISP
AUD
SETUP
M/S
7.
Rock
"ROCK"
8.
9.
Classic Rock
Adult Hits
Soft Rock
Top 40
Country
Oldies
Soft
Nostalgia
Jazz
Classical
R & B
Soft R & B
Language
"CLS ROCK"
"ADLT HIT"
"SOFT RCK"
"TOP 40"
"COUNTRY"
"OLDIES"
"SOFT"
"NOSTALGA"
"JAZZ"
"CLASSICL"
"R & B"
•
•
The PTY function cannot be used during a traffic bulletin
or AM reception.
Speech and Music include the Program type below.
Music: No.7 — 19, 21
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Speech: No.3 — 6, 20, 22 — 26
•
•
The Program Type can be stored in the [1] — [6] button
memory and recalled quickly. Refer to the <Program Type
Preset> (page 39).
When the selected Program Type is not found, "NO PTY"
is displayed. Select another Program Type.
"SOFT R&B"
"LANGUAGE"
38
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
#
: Press for # seconds.
Registration of a station as a PTY
Program Type Preset
Registers a Program Type for stations without PTY
data.
Putting the Program Type in the Preset button
memory and quick recall.
1
2
Receive the station you want to register
Presetting the Program Type
1
2
Select the Program Type to preset
Refer to <PTY (Program Type)> (page 38).
Preset the Program Type
Select the Program Type to register
Refer to <PTY (Program Type)> (page 38).
Register the Program Type
3
AUTO
AME
VOL
FM
SCRL
ATT
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
VOL
PTY/C
SW
DISP
AUD
SETUP
M/S
SCAN
Q
MENU
STOP
RDM
REP
F
SEL
M RDM
Confirming the Program Type
Recalling a preset Program Type
AUTO
AME
FM
SCRL
ATT
1
Enter PTY mode
VOL
Refer to <PTY (Program Type)> (page 38).
PTY/C
SW
DISP
AUD
SETUP
M/S
SCAN
AM
Q
MENU
STOP
RDM
REP
F
SEL
M RDM
2
Recall the Program Type
The Program Type is displayed for 5 seconds.
4
Exit PTY mode
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
AUTO
AME
FM
SCRL
ATT
VOL
/C.S.
ISP
AUD
SETUP
M/S
A
Radio Text Scroll
Scrolling the displayed radio text.
•
If "DISP" is set to "OFF" in the <Menu setup> (page 48) ,
the display may be turned off during scrolling.
English
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Control
Sets up sound effects, such as equalizer and speaker settings.
Detailed audio control
Audio setup
The following features can be set up under audio
control.
Sets up volume offset, dual zone function, etc.
1
Start audio setup
ATT
Display
Setting
AME
"R-VOL"
Adjusts the volume of the rear speakers.
(Adjustable range: 0 – 35)
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
M
STOP
RDM
REP
F.SEL
M.RDM
"SW L"
Adjusts the volume of the subwoofers.
(Adjustable range: -15 – +15)
"BAS L"
"MID L"
"TRE L"
"BAL"
Adjusts the bass volume.
Adjusts the middle volume.
Adjusts the treble volume.
Adjusts the volume balance between the left
and the right.
2
Select features to set
AME
ATT
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
"FAD"
Adjusts the volume balance between the front
and the rear.
Each time the knob is pressed, the type
changes in the following order.
Feature
Setting range
HPF
Specifies the front high-pass filter cutoff
frequency.
Specifies the rear high-pass filter cutoff
frequency.
Specifies the low-pass filter cutoff frequency.
Specifies the subwoofer phase.
Adjusts the volume difference between sources.
Corrects treble and bass when the volume is low.
Specifies the output level of the AV OUT terminal.
Turns the dual zone function ON/OFF.
•
For the setup method, refer to <Adjusts sound quality
and others> (page 13).
Bass, Middle, and Treble can be set up for each source.
"R-VOL" can be adjusted when the dual zone function is
set to ON.
"SW L" and "FAD" cannot be adjusted if the dual zone
function is set to ON.
For further information on the dual zone function, refer
to <Audio setup> (page 40).
"SW L" can be adjusted if "SWPRE" is set to "SW" in the
menu setup while the subwoofer output is set to ON.
For details on how to set up "SWPRE", refer to <Menu
setup> (page 48), and for subwoofer output, refer to
<Subwoofer output control> (page 42).
HPR
•
•
LPF
PHAS
V-OFF
LOUD
AVOUT
2ZON
•
•
"SW L" cannot be adjusted if "SWPRE" is set to "AV".
40
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
#
: Press for # seconds.
3
Set up each feature
Speaker setup
AUTO
AME
Fine adjust the System Q value to the speakers.
FM
SCRL
ATT
1
Set to STANDBY mode
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
VOL
DISP
AUD
SETUP
M/S
SCAN
AM
SW
EQ MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
OFF
The setting range of each item is as follows:
Feature
Setting range
HPF/HPR
THRU (Filter Off)/40/60/80/100/120/150/
180/220 (Hz)
STANDBY
LPF
50/60/80/100/120 (Hz)/THRU (Filter Off)
REV (180˚)/NML (0˚)
-8 – 0
OFF/ON
-15 – 0
Select "STANDBY".
PHAS
V-OFF
LOUD
AVOUT
2ZON
2
3
Set to the speaker matching mode
TI
AME
FM
SCRL
ATT
VOL
DISP
AUD
M/S
SCAN
AM
SW
OFF/DVD/AUX
SETUP
EQ MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
4
Exit audio setup
ATT
Select a speaker
AME
TI
AME
FM
SCRL
ATT
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
M
STOP
RDM
REP
F.SEL
M.RDM
VOL
DISP
AUD
SETUP
M/S
SCAN
AM
SW
EQ MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
Each time the knob is rotated, the indication
changes in the following order.
•
If a volume offset is set for each source with "V-OFF", the
volume will be nearly the same for all sources when the
source is changed.
You can select "AUX" for "2ZON" when CA-C1AX/CA-
C2AX (optional accessory) is connected.
Display
Speaker type
OFF
For 5 & 4 in. speakers
For 6 & 6x9 in. speakers
For OEM speakers
•
•
•
"SP OFF"
"SP 5/4"
"SP 6*9/6"
"SP OEM"
When "2ZON" is ON ("DVD"/"AUX"), you can only set "V-
OFF" and "LOUD".
When using the dual zone function, different sources can
be output from the front speakers (source of this unit)
and rear speakers (disc source sound of this unit).
For "LPF" and "PHAS", the feature "SWPRE" needs to be
set to "SW" (subwoofer) in advance in the menu setup,
and the subwoofer output to ON. For details on how to
set up "SWPRE", refer to <Menu setup> (page 48), and for
subwoofer output, refer to <Subwoofer output control>
(page 42).
4
Exit the speaker matching mode
•
TI
AME
FM
SCRL
ATT
VOL
DISP
AUD
SETUP
M/S
SCAN
AM
SW
EQ MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
•
•
"PHAS" cannot be set up when "LPF" is set to "THRU".
"AVOUT" can be set when the feature "SWPRE" in <Menu
setup> (page 48) is set to "AV".
English
41
Download from Www.Somanuals.com. All Manuals Search And Download.
#
Audio Control
System Q
: Press for # seconds.
Subwoofer output control
Shows the equalizer curve for the song being
played.
Turns the subwoofer output ON/OFF.
SW ON
SW OFF
(Subwoofer ON)
(Subwoofer OFF)
1
Select the desired source
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
•
•
Cannot be set when the dual zone function is activated.
The subwoofer can be turned ON/OFF when the feature
"SWPRE" in <Menu setup> (page 48) is set to "SW"
(subwoofer).
2
Recall the System Q
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
Each time the button is pressed, the type
changes in the following order.
Display
"USER"
Setting
User
"ROCK"
"POPS"
"EASY"
Rock
Pops
Easy
"TOP40"
"JAZZ"
Top 40
Jazz
"NATURAL"
Natural
•
•
The System Q can be set for each source.
The System Q value varies depending on the settings
made in the <Speaker setup> (page 41). Perform the
<Speaker setup> in advance.
•
•
"USER" is the value that was set the <Adjusts sound
quality and others> (page 13).
If the System Q setting is changed, the values ("BAS L",
"MID L", and "TRE L") set in the <Adjusts sound quality and
others> are replaced with the System Q value.
42
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
TEL Mute Control
The audio system automatically mutes when a call comes in.
TEL Mute
When a call comes in
CALL
The audio system pauses.
Listening to the audio during a call
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
AM
SW
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
OFF
The "CALL" display disappears and the audio
system comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio
system sound comes back ON.
•
To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to <Connections> (page 74).
English
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Control
Set information to be shown on the display, select a file to play while watching the monitor, and detach/
attach the panel.
While playing CDs
Selecting display information
Display
Setting
Changes the information to be shown on the
display.
"D-TITLE"*1
"T-TITLE"*1
"P-TIME"
"A-TIME"*2
"R-TIME"*2
"CLOCK"
Disc title
Track title
Track number & Play time
Disc play time
Remaining disc time
Clock
1
Start display selection
AUTO
AME
FM
SCRL
ATT
VOL
AUD
SETUP
M/S
*1 If not registered, play time is displayed instead.
*2 Not displayed with CD changer.
DISP SEL
While playing audio files/video files/picture
files
2
Select display information
Display
Setting
"TITLE"*3*4
"ALBUM"*3*4*5
"FOLDER"
"FILE"
"P-TIME"
"V-LAVEL"*4
"CLOCK"
Song title & Artist name
Album title & Artist name
Folder name
File names
Track number & Play time
Volume label
Each time the button is pressed, the type
changes in the following order.
In STANDBY/AUX
Display
Setting
Clock
"SRC NAME"
"CLOCK"
"STANDBY"/AUX name
Clock
*3 Video files or picture files cannot be displayed.
*4 If not registered, play time is displayed instead.
*5 The play time is displayed while playing WMA files.
While receiving FM/AM and traffic
information
While playing DVDs
Display
Setting
Display
Setting
"C-TIME"
"T-TIME"
"R-TIME"
"TNO:CNO"
"V-LABEL"
"CLOCK"
Chapter play time
Title play time
Remaining disc time
Title/Chapter number
Volume label
Clock
"FREQ/PS"
"R-TEXT"
Program Service name or Frequency (FM)
Radio text, Program Service name or
Frequency (FM)
Frequency indication (AM)
Clock
"FREQ"
"CLOCK"
44
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
#
: Press for # seconds.
While playing VCDs
Display
Setting description
"P-TIME"*6
Scene/Track play time
"S-TIME"*7
"A-TIME"*6
"R-TIME"*6
"V-LABEL"
"CLOCK"
Scene play time
Disc play time
Remaining disc time
Volume label
Clock
*6 Can be displayed when the PBC function is OFF.
*7 Can be displayed when the PBC function is ON.
3
Exit display selection
AUTO
AME
FM
SCRL
ATT
VOL
/C.S.
ISP
AUD
SETUP
M/S
English
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Control
Monitor information display &
file selection
Displays information on the disc source being
played, and selects a file to be played.
1
Display source information
You can select the information to show
when "∞" and "5" are displayed.
Information on the source is displayed on the
monitor.
This information remains displayed until an
image is displayed on the monitor.
!
"
3
Display the file list
"
#
Audio file, movie file, or picture file list is
displayed.
! Media information
Play time and text information is displayed.
" Status information
Play function setting status is displayed.
# Source information display
Receiving frequency, band, number of
channels, etc. are displayed during radio
reception.
Play time, title/track/chapter number, setting
status of each function, etc. are displayed
while playing DVDs, etc.
4
Select a file to play from the list
2
Display disc and file information
Information on the disc and the file is displayed.
Depending on discs, you can switch the
displayed information as you press this button.
•
The file list is not displayed if the disc being played does
not have an audio file, movie file, or picture file.
46
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing operation panel
Installing operation panel
Removes the operation panel.
Installs the operation panel.
1
1
Open the operation panel
Align the operation panel with the main
unit
2
Remove the operation panel
Antitheft warning lamp
Push in the panel aligning the hole in the panel
with the shaft at the right of the main unit.
2
Install the operation panel
•
•
Removing the panel turns off the power.
Since the panel is a precision component, it may be
damaged by shock when exposed to vibration or
dropped. Store the panel with care after removing it.
Do not store the removed panel in the following places.
- Places exposed to direct sun light
- Places with high humidity
- Dusty places
This unit is provided with a DSI (Security indicator)
function. If the "DSI" feature is set to "ON" in the <Menu
setup> (page 48), a warning lamp blinks when the panel
is removed for antitheft purposes.
Push the left side of the panel into the main
unit until it locks.
The panel is now installed and the unit is ready
for use.
•
•
English
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Setting up various functions.
Menu setup
Display
Setting
Setting overview
Source
"CODE SET"/ Refer to
"CODE CLR" page 50
Sets/Resets security code
Sets up various functions for each source.
1
Select a source
"BEEP"
"CLK ADJ" Refer to
page 52
ON*/OFF
Sets beep tone ON/OFF.
Sets the clock.
VOL
PTY/C.S.
SW
DISP
AUD
M/S
SCAN
AM
SRC
SETUP
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
"SYNC"
ON/OFF*
Specifies whether to synchronize
the RDS station time data with
the clock of this unit.
"DSI"
ON*/OFF
Sets the antitheft warning LED.
2
Set to the menu mode
"KEY"
"DISP"
GRN/RED* Sets the button illumination color.
VOL
ON*/OFF
Turns off the display when not
in use.
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
"DIM"
ON*/OFF
Adjusts the brightness of
the display according to the
surrounding illumination.
MENU
"SWPRE"
"AMP"
SW*/AV
ON*/OFF
Sets PREOUT output signal.
Specifies whether the built-in
amplifier is turned ON/OFF.
3
Select features to set
"ZONE2"
"T.I"
R*/F
Sets the output destination of the
dual zone function sub source.
Specifies whether the traffic
bulletin is switched to automatic
start.
ON/OFF*
Refer to
page 56
The features displayed vary depending on the
source.
"CRSC"
OFF/ON*
Switches to Monaural to decrease
noise when reception is poor.
4
Set up each feature
"HDR MODE" Refer to
page 52
Sets the stations to be received
with HD Radio.
"ESN"
No setting is Displays SIRIUS ID (Electronic
available
serial number).
"NAME SET" Refer to
page 53
Names the AUX source.
"SCL"
AUTO*/
MANU
Specifies whether the text is
scrolled automatically.
•
For details on how to set features followed by a page
number, refer to the page shown.
"CD READ" 1*/2
Sets the CD read mode.
"A-
PRESET"
Refer to
page 54
Registers/recalls audio settings.
"DEMO"
ON*/OFF
Refer to
page 54
Specifies whether to enable
demonstration.
"M/V"
No setting is Displays Macrovision version.
available
* Indicates the default configuration after purchase.
48
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
#
: Press for # seconds.
: Can be set in standby state.
: Can be set in other than standby state.
: Can be set while accessing DVD source.
: Can be set during FM reception.
: Can be set while accessing AUX EXT source.
: Can be set while accessing HD Radio source.
(optional)
: Can be set while accessing SIRIUS source. (optional)
5
Exit menu mode
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
AM
SW
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
OFF
•
•
"ZONE2" is displayed while the dual zone function is set
to ON.
"SWPRE" is displayed when dual zone function is turned
OFF.
•
•
•
"CD READ" can be set while no disc is inserted in the unit.
"CLK ADJ" cannot be set if "SYNC" is set to "ON".
For further information on each feature, refer to <Help?
Term> (page 68).
•
•
•
If a security code is set, "CODE CLR" (Reset) is displayed
instead of "CODE SET" (Set).
Changing "SWPRE" setting will change the "AVOUT"
setting value of <Audio setup> (page 40) to "–15".
"DISP" can be set when "DEMO" is "OFF".
English
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
5
Setting security code
Confirm the entry
AME
ATT
Sets a security code to prevent theft.
VOL
S.
I
AUD
SETUP
M/S
SCAN
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
•
•
To change/reset a security code, the security code is
required. It is recommended that you write down your
security code.
Before setting a security code, turn off the demonstration
mode. For further information, refer to <Demonstration
setup> (page 54).
RE-ENTER
CODE : ––––
6
7
Repeat the entry
Using the same method as in the step 4, enter
the same security code.
1
Set to the menu mode
Confirm the entry
ATT
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
AM
SW
AME
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
OFF
VOL
S.
I
AUD
SETUP
M/S
SCAN
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
MENU
APPROVED
2
3
Select the security code set feature
8
Exit the security code setting
VOL
CODE SET
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
Start security code setting
ATT
AME
•
•
If the security code entered in step 6 is different from the
code entered in step 4, you must repeat the procedure
from step 4.
Once the security code has been set, the code needs to
be entered every time the Reset button is pressed or the
battery is disconnected. For further information, refer to
<Security code entry> (page 51).
The security code can be set in the STANDBY state. For
the basic method of how to operate the menu, refer to
<Menu setup> (page 48).
VOL
S.
AUD
SETUP
M/S
SCAN
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
ENTER
CODE : ––––
4
Enter a security code
•
Select the digit to enter.
Clearing security code
Select a number to enter.
Cancels the security code.
1
Set to the menu mode
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
MENU
50
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
#
: Press for # seconds.
2
3
Display the security code canceling feature
Security code entry
If a security code is set, you must enter the code
the first time you turn the unit on after the Reset
button has been pressed or the unit has been
disconnected to the battery of the car.
CODE CLR
1
Enter a security code
Select the security code canceling feature
ATT
AME
Select the digit to enter.
VOL
S.
AUD
SETUP
M/S
SCAN
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
ENTER
CODE : ––––
Select a number to enter.
4
Enter a security code
Select the digit to enter.
Enter the security code set in <Setting security
code> (page 50).
Select a number to enter.
2
Confirm the entry
ATT
AME
VOL
S.
AUD
SETUP
M/S
SCAN
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
Enter the security code set in <Setting security
code> (page 50).
The power turns on.
APPROVED
5
Confirm the entry
ATT
AME
•
If an incorrect security code is entered the power will
VOL
S.
AUD
SETUP
M/S
SCAN
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
turn off. In this case, press the
button to turn on
the power and enter the security code again.
CLEAR
6
Exit the security code canceling
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
•
•
The security code can be canceled in the STANDBY state.
For the basic method of how to operate the menu, refer
to <Menu setup> (page 48).
If an incorrect security code is entered, "ERROR" is
displayed. Repeat the procedure from step 4 to enter a
correct code.
English
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Adjusting the clock
HD Radio Receive mode setting
Adjust the clock of this unit.
Setup for receiving HD Radio stations.
1
1
Set to the menu mode
Set to the menu mode
VOL
VOL
PTY/C.S.
DISP
PTY/C.S.
SW
DISP
AUD
SETUP
AUD
SETUP
M/S
SCAN
AM
SW
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
OFF
OFF
MENU
MENU
2
3
Select the clock adjustment feature
2
3
Select the HD radio receive mode setting
feature
CLK ADJ
HDR MODE
Start clock adjustment
Start Receive mode setting
AUTO
AME
FM
SCRL
ATT
AUTO
AME
FM
SCRL
ATT
VOL
.S
AUD
SETUP
M/S
VOL
I
AUD
SETUP
M/S
12 : 00
AUTO
4
5
6
Adjust "Hours"
4
Select Receive mode setting
Adjust "Minutes"
Display
"AUTO"
Setting
Analog broadcasts and digital broadcasts will
be switched automatically. When both are
being transmitted, the digital broadcast will
have priority.
Digital broadcasts only.
Analog broadcasts only.
"DIGITAL"
"ANALOG"
Exit clock adjustment
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
•
After "Minutes" is adjusted, the clock starts with 00
seconds.
52
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
#
: Press for # seconds.
Press and hold down the knob until the name
of the AUX EXT source being set is displayed.
5
Exit Receive mode Setting.
VOL
5
Select the AUX name
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
•
Even if the Receive mode is set to "AUTO" while a Ball
game mode program (non-delayed broadcast program)
is received, the Receive mode will automatically switch to
Analog broadcast only.
As you move the knob to the left or right, the
AUX name changes in the following order.
Display
"AUX EXT"
"DVD"
"PORTABLE"
"GAME"
"VIDEO"
"TV"
AUX name select
Specifies the display to appear when AUX source
is selected.
1
Select the AUX source
6
Exit the name set
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
VOL
OFF
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
AM
SW
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
OFF
AUX EXT
2
Set to the menu mode
•
•
If no operation is made for 10 seconds, the name
displayed at that moment is selected.
<AUX name select> can be set only for AUX input using
KCA-S220A (optional accessory).
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
MENU
3
4
Select the name setting feature
NAME SET
Start name setting
AUTO
AME
FM
SCRL
ATT
VOL
AUD
SETUP
M/S
AUX EXT
English
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Demonstration setup
Audio preset
Demonstrates the functions of this unit.
Memorizes the audio settings. These will be
retained even when the Reset button is pressed.
1
Set to the menu mode
1
Set up audio control settings to be
memorized
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
Refer to <Detailed audio control> (page 40)
and <Audio setup> (page 40).
2
Set to the menu mode
MENU
VOL
2
3
PTY/C.S.
DISP
Select the demonstration feature
AUD
SETUP
M/S
SCAN
AM
SW
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
OFF
DEMO
MENU
3
4
Select the Audio preset feature
Set up the demonstration feature
AUTO
AME
FM
SCRL
ATT
A-PRESET
VOL
.
AUD
SETUP
M/S
DEMO OFF
Set to Audio preset mode
The demonstration function turns ON/OFF
AUTO
AME
FM
SCRL
ATT
each time the button is pressed and held down
for 2 seconds or more.
VOL
.
I
AUD
SETUP
M/S
RECALL
•
This setting can be used in the standby state. For the
basic method to operate the menu, refer to <Menu
setup> (page 48).
5
6
Show the memory
MEMORY
Memorize the audio control settings
AUTO
AME
FM
SCRL
ATT
VOL
.
AUD
SETUP
M/S
MEMORY
54
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
#
: Press for # seconds.
7
5
Recall the audio control settings
Exit the audio preset mode
AUTO
AME
FM
SCRL
ATT
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
VOL
AUD
SETUP
M/S
RECALL
•
•
The settings cannot be memorized by source.
6
Exit the audio preset mode
Only 1 set of audio control settings can be memorized.
You can memorize the features in <Detailed audio
control> and <Audio setup>. Note, however, that the
values set for "R-VOL", "BAL", "FAD", "AVOUT" and "2ZON"
will not be memorized.
VOL
PTY/C.S.
DISP
AUD
SETUP
M/S
SCAN
AM
SW
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
SRC
OFF
Recalling audio preset values
•
If audio preset is recalled, the values set in <Detailed
Call the values memorized in the Audio preset
memory.
audio control> and <Audio setup> will be overwritten by
the memorized values.
1
Select a source
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
2
Set to the menu mode
VOL
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
MENU
3
4
Select the Audio preset feature
A-PRESET
Set to Audio preset mode
AUTO
AME
FM
SCRL
ATT
VOL
AUD
SETUP
M/S
RECALL
English
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
T.I (Traffic Information)
Switches to traffic information automatically
when a traffic bulletin starts even when you are
not listening to the radio.
When T.I is ON, the "TI" indicator is ON.
The "TI" indicator blinks while stations other
than traffic information stations are received.
When a traffic bulletin starts, "TRAFFIC" is
displayed and the mode switches to traffic
information.
Receiving other traffic information
stations
•
•
When receiving an AM station while the Traffic
Information function is turned ON, you will be switched
to an FM station.
The volume adjusted while receiving traffic information
is automatically memorized and the next time traffic
information is accessed, you will receive it at that set
volume.
56
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
HD Radio Control
Connecting the optional HD Radio Tuner (KTC-HR100/TR) allows you to listen to HD Radio with this unit.
About HD Radio
Tuning
•
When you connect an HD Radio, the tuner
features of the unit are disabled and those of
the HD Radio tuner are enabled. Some setting
methods including the Tuning Mode will change.
With the HD Radio tuner, you can access
Selects the HD Radio station.
1
Select the HD Radio source
VOL
•
PTY/C.S.
SW
DISP
AUD
SETUP
M/S
SCAN
AM
SRC
Q
MENU
STOP
RDM
REP
F.SEL
M.RDM
OFF
functions such as <Station Preset Memory>,
<Auto Memory Entry>, and <Preset Tuning>
similar to the Tuner features. Refer to Tuner
features for details on how to use the functions.
HD RADIO
2
Select the HD FM band
•
The RDS function will no longer be available. Also note
that the "SYNC" feature in the menu will be displayed,
but will not function.
Each time the button is pressed, the radio band
switches in the following order.
Display
"HF1"
"HF2"
Band
HD FM 1
HD FM 2
HD FM 3
"HF3"
Select the HD AM band
Select a station
3
•
Tune the radio to one or more stations (digital and/or
analog) by using the "HDR MODE" (page 48) settings in
<Menu setup> (page 48).
English
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controller
This unit can be operated using the Remote Controller supplied with the unit.
•
Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could
result, if the Remote Controller falls down and gets wedged under the pedals while driving.
Do not place the battery near an open flame or heat source. This may cause the battery to explode.
Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak
fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.
Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a
physician.
•
•
Battery installation
Remote Controller mode switch
Using a pen tip or similar object, open the battery
compartment in Direction 2 (as shown) while
unfastening the lock in Direction 1 (as shown).
Insert the lithium battery (CR2025) supplied,
making sure the polarities are correct. (See the
illustration inside the battery compartment.)
The functions operated from the remote
controller differ depending on the position of the
mode switch.
AUD mode
Switch to this mode when
controlling a selected
source or a CD changer etc.
DVD mode
Switch to this mode when
playing DVDs or CDs etc.
with the player integrated
in this unit.
•
•
The position of the remote control mode switch is
indicated in the title of each mode, e.g., "(AUD mode)".
When controlling a player that is not integrated in the
unit, select "AUD" mode.
•
If the Remote Controller operates only over shorter
distances or does not operate at all, it is possible that the
lithium battery is depleted. In such instances, replace the
battery with a new one.
58
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu settings
Sets the menu.
Common operations (AUD mode)
Source switching
Switches to the source to be played.
1
Press the Menu Mode key.
2
Select a feature.
Volume control
Adjusts the volume.
3
Adjust the feature.
Volume attenuator
Press the key once to lower the volume. Press again
to restore the previous volume.
•
Refer to page 48 for information on the features that can
be adjusted.
Audio control
Adjusts the sound quality.
Dual Zone
Switches the Dual Zone function ON and OFF.
1
Select the feature you want to adjust.
Rear volume control
Adjusts volume at rear when the Dual Zone
function is ON.
2
Adjust.
•
Refer to <Detailed audio control> (page 40) for
information on the features that can be adjusted.
However, you cannot adjust the detailed setting features
such as "BAS F".
English
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controller
Direct search
DVD/VCD/CD/Audio files (DVD mode)
Folder search
Selects the folder to be played.
Pressing this button switches the features that can
be searched directly.
DVD
Track search and file search
Title number
Chapter number
Play time
Selects the track or file to be played.
Item number*
Cancel
* You may not be able to use this function with some discs
or scenes.
Play/Pause
Pauses the track.
Press again to resume playing.
CD
Track number
Play time
Cancel
Audio files
Stop
Folder number
File number
Cancel
Memorizes the last point where the disc stopped.
When pressed again, the last point is deleted.
VCD1.X, VCD 2.X (PBC OFF)
Track number
Play time
Cancel
VCD 2.X (PBC ON)
Scene number
Number
Cancel
Once you have switched to the direct search
feature, specify the search number from the
numeric keypad, and then press
[ENTER] key.
60
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Numeric keypad
Radio (AUD mode)
Band switching
Switches to bands received by the unit.
•
Specify the number to search in direct search.
Station selection
Switches to broadcast stations received by the unit.
Direct tuning
After pressing this key, use the keypad to specify
the broadcast station you wish to receive.
Example: 92.1MHz (FM)
Example: 810kHz (AM)
Numeric keypad
•
•
To use preset tuning, press the number of a
programmed broadcast station. (
Press the direct tuning key first, then specify the
frequency of the station to receive.
–
)
English
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Help?
Playing files
For information on characters that can be used,
refer to the writing software manual or to the <File
names> section below.
Audio files
This unit plays MP3 and WMA audio files. The
following restrictions apply to the formats and
discs that this unit can play. Please note that in
all cases the values shown for the characters are
those for one-byte characters.
However, the following restrictions apply to discs
this unit can play.
• Maximum directory hierarchy: 8 levels
• Maximum number of files per folder: 255
• Maximum number of folders: 254
Acceptable audio files
• MP3
• WMA
Audio files written in formats other than those
shown above may not play properly or the file and
folder names may not be displayed correctly.
Settings for compression software and writing
software
It is recommended that when compressing an
audio file you select the "constant" size of "128bps"
for the transfer bit rate setting in the compression
software. Select the "Disc at Once" setting when
recording data by filling an empty disc at one time.
•
•
Copy protected files cannot be played.
Playback or display may not be possible owing to
encoded software settings or environments.
It may not be possible to play files with more recent
versions of compressed formatting or files with added
specifications.
•
Acceptable MP3 formats
This unit can play the following two MP3 file
formats:
MPEG1 Audio Layer 3 and MPEG 2 Audio LSF Layer
3 standard files.
File names
Please add the appropriate ".MP3" or ".WMA"
extension to audio files. Files that do not have either
of these extensions cannot be played.
• Sampling frequencies: 32/ 44.1/ 48 kHz
• Bit rate: 32–320 kbps
Acceptable WMA formats
This unit can play WMA files in the following
formats.
• Windows Media™ Audio
• Sampling frequencies: 32/ 44.1/ 48 kHz
• Bit rate: 48–192 kbps
It is possible that when some functions of Windows
Media™ Player version 9 or higher are used, normal
playback will not be possible.
•
Do not add the above extensions to files that are not
audio files. Should you add one of these extensions, the
unit will mistakenly recognize the file as an audio file,
thus producing a loud noise that could damage the
speakers.
Display of track information for audio files
This unit can display the following track information:
track name, artist name and album name.
Information is displayed using Roman letters and
Arabic numerals.
Acceptable discs
• CD-R/RW/ROM
• DVD R/RW
Discs made using simple CD-RW formats cannot be
played.
• Track information recorded using v1.0, 1.1 or 2.3
standards for the MP3 ID3 Tag is displayed using
a maximum of 30 characters.
• WMA content properties are displayed using a
maximum of 30 characters.
Acceptable CD-R/RW formats
This unit can play discs in the following formats.
• ISO 9660 Level 1
• ISO 9660 Level 2
• Joliet
• Romeo
Please note that file and folder names can be
displayed using a maximum of 128 characters.
(Includes period "." and three-letter file extension.)
62
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Order for playing audio files
When performing File Select during ¡$
The order in which files or folders are selected using
Playback, Folder Search, File Search and Folder
Select is the order written into the writing software.
As a result, there may be occasions when the
order in which you expect tracks to play does not
correspond to the actual order in which they play.
playback…
¡# ¡& ...
¡% ¡& ¡# ...
➡
➡
➡
When performing Folder Select 1 during ¡$
playback…
Although it depends on your PC environment, it is
possible to set the playing order by specifying using
numbers "01" through "99" at the beginning of file
names and writing them into a CD-R or CD-RW
disc etc.
3
6
2
5
When using discs with folder and file levels like
that shown below, the following occurs when
conducting a Folder Search or File Search or when
selecting a folder.
When performing Folder Select 2 during ¡$
playback…
Example
Folder
Audio file
3
8
6
5 ...
5
6
8
3 ...
➡
➡
➡
➡
➡
➡
Root
Level 1
Level 3
Level 5
Level 2
Level 4
Performing a File Search during ¡$ playback…
Start of ¡$ ¡#
¡% ¡&
➡
➡
When performing Folder Search during ¡$
playback…
3
8
6
5 ...
5
6
8
3 ...
➡
➡
➡
➡
➡
➡
English
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Help? Playing files
Video files
Picture files
This unit can play MPEG video files. The following
restrictions apply to the formats and discs that
this unit can play.
This unit can play JPEG files. The following
restrictions apply to the formats and discs that
this unit can play.
Acceptable video files
Acceptable picture files
• Format: MPEG1, MPEG2
• Format: JPEG
• Picture size:
• Baseline format:
MPEG1: 320 × 240, 352 × 240
MPEG2: 640 × 480, 704 × 480
• Audio format: MPEG Audio Layer 2
• Audio sampling frequencies: 32/ 44.1/ 48 kHz
• Audio bit rate: 32–384 kbps (Only constant bit
rates)
Up to a maximum of 5120(W) × 3840(H) pixels
• Progressive format:
Up to a maximum of 2048(W) × 1536(H) pixels
•
•
Enlarges and reduces images up to the size shown above
to fit to the screen.
The picture files with information attached (such as Exif)
may not be displayed or operated (e.g.: rotation display)
properly.
Acceptable discs
• DVD R/RW
Extensions
Video files must have one of the following
extensions:
Extensions
Picture files must have one of the following
mpg, mpeg, mpe, m1v, m2v
extensions:
jpg, jpeg, jpe, jfif
Disc formats, file and folder names and playing
order are the same as those for audio files. Refer to
<Audio files> (page 62).
Acceptable discs, disc formats, file and folder names
and playing order are the same as those for audio
files. Refer to <Audio files> (page 62).
64
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Help?
Troubleshooting
?
?
The TEL mute function turns ON even
General
though the TEL mute wire is not connected.
?
The power does not turn ON.
✔
The TEL mute wire is touching a metal part
of the car.
✔
The fuse has blown.
After checking for short circuits in the wires,
replace the fuse with one with the same
rating.
Pull the TEL mute wire away from the metal
part of the car.
The memory is erased when the ignition is
turned OFF.
✔
The speaker wire has a short-circuit or
touches the chassis of the vehicle, and then
the protection function is activated.
✔
The ignition and battery wire are incorrectly
connected.
Wire or insulate the speaker cable properly
and press the Reset button.
Connect the wire correctly, referring to the
<Connections> section (page 74).
✔
A security code has been set.
?
?
There is no loudness effect.
Enter the set security code (page 51).
✔
You are using Subwoofer preout.
?
No sound can be heard, or the volume is low.
Loudness has no effect in Subwoofer preout.
✔
✔
✔
✔
The fader or balance settings are set all the
way to one side.
Center the fader and balance settings.
Even if Loudness is turned ON, high-pitched
tone is not compensated for.
✔
Tuner source is selected.
The "AMP" feature in Menu setup is "OFF".
Turn the "AMP" feature "ON", referring to
<Menu setup> section (page 48).
High-pitched tone is not compensated for
when in Tuner source.
?
Radio reception is poor.
The values for Volume offset are too low.
Turn up the Volume offset, referring to the
<Audio setup> section (page 40).
✔
The car antenna is not extended.
Pull the antenna out all the way.
✔
The antenna control wire is not connected.
The input/output wires or wiring harness are
connected incorrectly.
Connect the wire correctly, referring to the
<Connections> section (page 74).
Reconnect the input/output wires or
the wiring harness correctly. Refer to the
<Connections> section (page 74).
?
?
There is a source you cannot switch.
✔
The Disc changer is not connected.
?
The sound quality is poor or distorted.
Connect the Disc changer. If the Disc
changer is not connected to it’s input
terminal, you cannot switch to an external
disc source.
✔
One of the speaker wires is being pinched
by a screw in the car.
Check the speaker wiring.
✔
The speakers are not wired correctly.
The display blacks out while scrolling.
Reconnect the speaker wires so that each
output terminal is connected to a different
speaker.
✔
The "DISP" feature under <Menu setup> is
"OFF".
Turn the "DISP" feature "ON", referring to the
<Menu setup> section (page 48).
?
The TEL mute function does not work.
✔
The TEL mute wire is not connected
properly.
Connect the wire correctly, referring to the
<Connections> section (page 74).
English
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Help? Troubleshooting
?
Even though Synchronize Clock is ON, the
clock cannot be adjusted.
Playing discs
?
?
?
Cannot insert disc.
✔
The received RDS station is not sending time
data.
✔
There is already another disc inserted.
Remove the inserted disc and insert the disc
you want to play.
Receive another RDS station.
?
The Dimmer function does not work.
A disc ejects as soon as it is loaded.
✔
The Dimmer wire is not connected correctly.
Check the Dimmer wire connection.
✔
The disc is quite dirty.
Clean the disc, refer to <Disc cleaning> in
the <Handling media> section (page 11).
✔
The "DIM" feature in the <Menu setup> is set
to "OFF".
Turn the "DIM" feature "ON", referring to the
<Menu setup> section (page 48).
Cannot remove disc.
✔
Disc stops while being ejected.
Continue to push the Eject button until the
disc is ejected completely.
?
Cannot set Dual Zone System of <Audio
Setup> (page 40).
✔
The cause is that more than 10 minutes have
elapsed since the vehicle ACC switch was
turned OFF.
The disc can only be removed within 10
minutes of the ACC switch being turned
OFF. If more than 10 minutes have elapsed,
turn the ACC switch ON again and press the
Eject button.
✔
CA-C1AX/ CA-C2AX is connected to KCA-
S220A or other units.
Connect the CA-C1AX/ CA-C2AX directly to
this unit.
✔
A disc whose validity date is expired is
loaded.
Turn the power OFF, and wait for 15 seconds
before pressing [0] (Eject) button.
?
The specified disc does not play, but another
one plays instead.
✔
The specified disc is quite dirty.
Clean the disc.
✔
The disc is loaded in a different slot from that
specified.
Eject the disc magazine and check the
number for the specified disc.
✔
The disc is severely scratched.
Try another disc instead.
?
Direct Search does not work.
✔
Another function is ON.
Turn Random Play or other functions OFF.
66
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
?
?
Cannot select soundtrack language, subtitle
language or angles, or the disc does not play
in the specified language.
HD Radio source
?
No sound can be heard, or the volume is low.
✔
The preset broadcast station is not
transmitting in the mode that was set with
<HD Radio Receive mode Setting> (page
52).
✔
Multiple languages or angles have not been
included.
It may be possible to select these using the
Menu. Refer to the disc's instruction leaflet.
Please set <HD Radio Receive mode
Setting> to "AUTO".
The VCD Menu (Playback Control) is not
displayed
✔
In digital AM broadcasting, receive mode
switches between stereo and monaural too
often.
✔
Playback Control has not been included in
the VCD.
Refer to the disc's instruction leaflet.
Receiving condition is bad or unstable.
Stereo is chosen when receiving condition is
good, and it switches to monaural when the
condition becomes bad.
Audio files
✔
HD Radio tuner is connected to KCA-S220A
or other units.
Connect the HD Radio tuner directly to this
unit.
?
?
Cannot play an Audio file.
The sound skips when an Audio file is being
played.
✔
The recording condition is bad.
Record the media again or use another
media.
Menu
✔
The media is scratched or dirty.
Clean the disc, refer to <Disc cleaning> in
the <Handling media> section (page 11).
?
The Security Code feature is not displayed.
✔
The "DEMO" feature in <Menu setup> is
"ON".
?
The Audio file track time is not displayed
correctly.
Turn the "DEMO" feature "OFF", referring to
the <Demonstration setup> section (page
54).
✔
--
There are times when it is not displayed
correctly depending on the recording
conditions of the Audio file.
✔
A security code has already been set.
When the Security Code is initially set, "CODE
SET" changes to "CODE CLR".
?
The display's brightness level does not
change.
✔
The car's light switch is OFF.
Turn ON the car's light switch.
✔
The illumination cord has not been
connected.
Connect the cord correctly, referring to the
<Connections> section (page 74).
English
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Help?
Term
LPF (Low pass filter)
A low pass filter cuts out frequencies higher than the
cutoff frequency.
When preamp output is used as a subwoofer, this
function is used to cut out high frequencies from the
output and produce only low frequencies. This function
can be disabled by turning on the "THRU" setting.
General
MP3
MP3 is an abbreviation for "MPEG Audio Layer 3". MPEG
Audio is the compression standard for only the audio
portion of image compression methods used for DVDs
and Video CDs.
This manual sometimes specifies audio files that use
this method.
For information on formats and the kinds of MP3
recorded discs that can be used, refer to the <Audio
files> section under Help? (page 62).
PHAS (Subwoofer phase)
Sets the phase of the subwoofer (positive phase or
reverse phase).
V-OFF (Volume offset)
WMA (Windows MediaTM Audio)
WMA is the abbreviation for the Windows Media™
Audio system of audio compression encoding
developed by Microsoft Corporation.
Controls the differences in the volumes of each source.
As a result, even when switching to a different source
the volume of the sound you hear will be more or less
the same.
This manual sometimes specifies audio files that use
this method.
AVOUT (AV out level)
For information on formats and the kinds of WMA
recorded media that can be used, refer to the <Audio
files> section under Help? (page 62).
Sets the signal level for audio output from the AV OUT
terminal.
2ZON (Dual zone)
Disc changer
The dual zone function splits the output of the main
source and sub source between the front speaker and
rear speaker.
These are either externally connected optional CD
changers (KDC-CX87, KDC-C719, KDC-C669, etc) or a
multimedia player (KDV-C810, KDV-C840).
OFF : Dual zone function is off.
DVD : DVD is set as the sub source.
AUX : Sub source is set to AUX.
• Output destination of sub source is specified using
"ZONE2" in the <Menu setup> section (page 48).
• The main source is specified using <Changes a
source> (page 13).
• Front speaker volume is adjusted using the [VOL]
button.
Audio control
R-VOL (Rear volume)
Controls volume at the rear when the Dual Zone
function is in use.
• Rear speaker volume is adjusted by "R-VOL" in the
<Detailed audio control> section (page 40) or by
using the [R.VOL] key (page 59) on the remote
control.
SW L (Subwoofer volume)
Controls the volume of the subwoofer.
HPF/HPR (High Pass Filter)
A high pass filter cuts out frequencies lower than the
cutoff frequency.
When preamp output is used as a subwoofer, this
function is used to cut out low frequencies from
the output and produce only high frequencies. This
function can be disabled by turning on the "THRU"
setting.
This unit is equipped with two high pass filters, one
in the front speaker (HPF) and one in the rear speaker
(HPR).
68
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
CRSC (Clean Reception System Circuit)
Menu
Temporarily have reception alternate from stereo to
mono to reduce multi-path noise when listening to an
FM station.
Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
AMP (Built-in amp output)
Output from the built-in amp is turned ON and OFF.
When there is a system where power amps are
connected to the preamp output terminals of both the
front speaker and the rear speaker, operation of the
built-in amp can be stopped by turning this function
"OFF".
The quality of audio output from the preamp outputs
can be improved by stopping operation of the built-in
amp.
DIM (Dimmer)
Display brightness automatically switches on in
conjunction with the vehicle light switch.
DISP
When set at the "OFF" position, the display disappears
if the unit is not operated for a period of five seconds.
This prevents the display from being reflected in the
vehicle's windows.
However, if any of the modes have been set the display
will not disappear even after five seconds.
When the display is off, pressing any buttons will return
the display.
Please note that when the display disappears, the
only operations that can be performed are turning
the power ON and OFF, adjusting volume, selecting a
source and ejecting a disc.
BEEP (Beeping)
This function produces a beeping sound when
pressing a button to confirm that the button has been
pressed.
If you find this beeping sound annoying, you can get
rid of it by turning it "OFF".
Please note that this beeping sound does not come
out of preamp outputs.
CD READ (Reading a CD)
Specifies the method for reading a CD.
When a specially formatted CD does not play properly,
specifying "2" will make the CD play. Please note that
even after selecting "2", it will not be possible to play
some music CDs. Also, if you set it to "2", you cannot
play audio or picture files. Under normal circumstances,
set at "1".
1 : It automatically distinguishes between a disc with
audio files/picture files and a music CD during
playing the disc.
DSI (Disabled system indicator)
Turns the security indicator ON and OFF.
When this function is ON and the panel has been
removed, the LED for the [0] (Eject) button flashes
so that it functions as a theft prevention warning
light.
2 : It overrides to play the disc as a CD.
KEY (Button illumination)
You can choose green or red for illuminating the
buttons.
CODE SET/CODE CLR (Setting security code/
Clearing security code)
Sets and cancels the security code
SCL (Scrolling)
Once a security code has been set, when the
unit is used for the first time after the unit has
been unplugged, the unit's power cord has been
disconnected or the Reset button has been pushed,
the power will not turn on unless you enter the set
security code. In other words, this function helps
prevent theft as the security code must be entered
after the unit has been removed from the vehicle.
In cases where there are too many characters to display
all the information when selecting disc or track titles,
disc or track text, group titles, folder names, file names,
track names and artist names or album names on the
display, use this function to scroll down so that all the
information is displayed.
When this function is set at "AUTO" the display scrolls
repeatedly. When it is set at "MANU" the display scrolls
once only when the display changes.
English
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Help? Term
SWPRE (Switchable preout)
This function sets audio to be output by the preamp
output terminal.
SW : Outputs audio used by the subwoofer.
AV : Outputs audio not affected by audio controls. Is set
when connected to a rear monitor.
SYNC (Synchronize Clock)
Synchronizes time data sent from an RDS station with
the unit's built-in clock.
Synchronization takes 3 to 4 minutes.
M/V (Macrovision Version)
Displays the version of copyright protection technology
used in a DVD.
ZONE2
Sets the output destination (front speakers or rear
speakers) of the sub source when the dual zone
function is ON.
70
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Help?
Error
E-07–67/ E-77 :
When the unit fails to operate correctly, the
cause of the failure appears on the display.
Is not operating correctly due to some reason or other.
➡ Push the unit's Reset button. If the "E-07−67"/
"E-77" message does not disappear, see your
nearest Kenwood dealer.
TOC ERR/READ ERR :
• Disc is unusually dirty.
• Disc has many scratches.
• Disc is upside down.
HOT ERR :
• The tray is not in the disc changer.
• There is no disc in the disc changer.
When the internal temperature of this unit rises to 60°C
or more, the protection circuit is activated and you
may not be able to operate the unit. At such times this
message will appear.
➡ Use the unit again after reducing the
temperature inside the vehicle.
E-05 :
Disc is upside down.
E-15 :
The disc you want to play does not include files that
can be played by this unit.
HOLD :
Activation of the protective circuit when the
temperature inside the disc changer is higher than 60
degrees Celsius stops the disc changer from operating.
At such times this message will appear.
➡ Use when the temperature at the site where the
disc changer has been fitted has dropped.
EJECT :
• Disc magazine has not been set.
• Disc magazine is not completely inserted.
• No disc is loaded in this unit.
Etc
indicator flashes :
NO DISC :
DVD player is not operating correctly.
➡ Remove the Disc and insert it again.
Disc magazine does not contain even a single disc.
REG ERR :
E-09/ E-19/ E-99 :
The disc you wanted to play has a region code that
cannot be played with this unit.
Is not operating correctly due to some reason or other.
➡ Press the [0] (Eject) button. If the message
does not disappear even after pushing the
Eject button, push the unit's Reset button. If the
message still does not disappear, contact your
nearest Kenwood dealer.
PAR ERR:
The disc you wanted to play has a higher level than the
parental level you set.
The following messages appear to inform you of
the status of the system.
LOAD (Flashes) :
Discs are currently being changed inside the disc
changer.
PRK OFF :
READING (Flashes) :
Data on the disc is currently being checked.
Source for displaying video is selected while car is
traveling.
➡ Video will be displayed when the car is stopped
and the parking brake has been engaged.
PROTECT (Flashes) :
Protective circuit has been activated because a speaker
cord has shorted or it has come in contact with the car
chassis.
CODE ---- :
Request to enter security code.
➡ Wire or insulate the speaker cord as appropriate
and then push the Reset button.
DEMO MODE :
The unit is currently in Demonstration mode. This
mode shows the unit's functions on the display. To
cancel turn the Demonstration mode OFF.
English
71
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD language codes
Code
aa
ab
af
am
ar
as
ay
az
ba
be
bg
bh
bi
bn
bo
br
ca
co
cs
cy
da
de
dz
el
en
eo
es
et
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Code
is
it
ja
jv
ka
kk
kl
km
kn
ko
ks
ku
ky
la
Language
Icelandic
Italian
Japanese
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Luxembourgish
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Code
si
sk
sl
sm
sn
so
sq
sr
ss
st
su
sv
sw
ta
Language
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
lb
ln
lo
lt
te
Telugu
Tajik
Thai
tg
th
ti
tk
tl
tn
to
tr
ts
tt
tw
uk
ur
uz
vi
vo
wo
xh
yo
zh
zu
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
lv
Welsh
Danish
German
Bhutani
Greek
mg
mi
mk
ml
mn
mo
mr
ms
mt
my
na
ne
nl
no
oc
om
or
pa
pl
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Twi
Ukrainian
Urdu
eu
fa
fi
fj
fo
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
fr
fy
Yoruba
Chinese
Zulu
ga
gd
gli
gn
gu
ha
he
hi
Polish
ps
pt
qu
rm
rn
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Hebrew
Hindi
hr
hu
hy
ia
ie
ik
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
ro
ru
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
rw
sa
sd
sg
sh
id
Serbo-Croatian
72
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories/ Installation Procedure
Accessories
Installation Procedure
1. To prevent a short circuit, remove the key from
the ignition and disconnect the - battery.
1
2. Make the proper input and output wire
connections for each unit.
3. Connect the speaker wires of the wiring harness.
4. Connect the wiring harness wires in the
following order: ground, battery, ignition.
5. Connect the wiring harness connector to the
unit.
6. Install the unit in your car.
7. Reconnect the - battery.
8. Press the Reset button.
..........1
..........2
..........4
..........4
..........2
..........1
..........1
..........1
..........1
..........1
..........1
2
3
4
5
6
7
8
9
0
!
2WARNING
If you connect the ignition wire (red) and the battery wire
(yellow) to the car chassis (ground), you may cause a short
circuit, that in turn may start a fire. Always connect those
wires to the power source running through the fuse box.
•
•
If the power is not turned ON (or it is ON, but will be OFF
immediately), the speaker wire may have a short-circuit
or touched the chassis of the vehicle and the protection
function may have been activated. Therefore, the speaker
wire should be checked.
If your car’s ignition does not have an ACC position,
connect the ignition wires to a power source that can be
turned on and off with the ignition key. If you connect
the ignition wire to a power source with a constant
voltage supply, as with battery wires, the battery may die.
If the console has a lid, make sure to install the unit so that
the faceplate will not hit the lid when closing and opening.
If the fuse blows, first make sure the wires aren’t touching
to cause a short circuit, then replace the old fuse with
one with the same rating.
•
•
•
•
Insulate unconnected wires with vinyl tape or other similar
material. To prevent a short circuit, do not remove the caps
on the ends of the unconnected wires or the terminals.
Connect the speaker wires correctly to the terminals to
which they correspond. The unit may be damaged or fail
to work if you share the - wires or ground them to any
metal part in the car.
•
When only two speakers are being connected to the
system, connect the connectors either to both the front
output terminals or to both the rear output terminals
(do not mix front and rear). For example, if you connect
the + connector of the left speaker to a front output
terminal, do not connect the - connector to a rear
output terminal.
•
•
After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
Mount the unit so that the mounting angle is 30° or less.
English
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Television monitor, etc
(optional accessory)
Visual output
(Yellow)
Parking sensor wire
Parking sensor wire
Detection cable
(Light Green)
Junction cable
(Light Green)
(Accessory8)
PRK SW
For the sake of safety,
be sure to connect the
parking sensor.
•
Connect to the vehicle's parking brake detection
switch harness using the supplied relay connector.
White/Black
–
To front left
FRONT
L
speaker
+
White
Gray/Black
–
To front right
FRONT
REAR
R
speaker
+
Gray
Green/Black
–
To rear left
speaker
L
+
Green
Purple/Black
–
To rear right
REAR
R
speaker
+
Purple
74
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear output
Subwoofer output/
AV (Audio) Output
Fuse (10A)
FM/AM antenna input
Antenna cord
Front output
Is not used.
Connector for external device
Items sold separately such as a disc changer and KCA-iP500 can be
connected here. Refer to the instruction manual of the device being
connected for detailed information on connection methods.
Wiring harness
(Accessory1)
Motor antenna control wire (Blue)
Depending on what antenna you are using, connect either to the
control terminal of the motor antenna, or to the power terminal
for the booster amplifier of the film-type antenna.
ANT CONT
Power control wire (Blue/White)
When using the optional power amplifier, connect to its power
control terminal.
P.CONT
TEL mute wire (Brown)
Connect to the terminal that is grounded when either the telephone
rings or during conversation.
MUTE
•
To connect the Kenwood navigation system, consult your
navigation manual.
Dimmer control wire (Orange/White)
To car light control switch
ILLUMI
Ignition key
switch
Ignition wire (Red)
ACC
Battery wire (Yellow)
Car fuse box
(Main fuse)
Car fuse box
Ground wire (Black) - (To car chassis)
–
+
Battery
English
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Non-Japanese cars
•
•
During installation, do not use any screws except for
those provided. The use of different screws might result
in damage to the main unit.
Damage may occur if a screwdriver or similar tool is used
with excessive force during the installations.
Bend the tabs of the mounting sleeve with a screwdriver
or similar utensil and attach it in place.
Accessory!
Rubber Bush
Screwing the Faceplate on the Unit
If you want to fasten the faceplate to the main
unit so that it does not fall off.
Firewall
Accessory90
1
2
Refer to the section <Removing the hard
rubber frame> (page 77) and then remove the
hard rubber frame.
Attachment screw
• When the space between the unit and Firewall is
narrow
Unit
Firewall
Drop open the faceplate by pressing the
Release button.
Accessory9
Attachment screw
Accessory!
Rubber Bush
• When the space between the unit and Firewall is
wide
Unit
Firewall
Accessory0
Attachment screw
Accessory!
Rubber Bush
3
Tighten the screw (ø2 × 5 mm) (Accessory5)
and bracket (Accessory 6) in the hole shown
on the diagram.
•
Make sure that the unit is installed securely in place. If
the unit is unstable, it may malfunction (for example, the
sound may skip).
Accessory6
Accessory5
Japanese cars
1
Refer to the section <Removing the hard
rubber frame> (page 77) and then remove the
hard rubber frame.
2
Align the holes in the unit (two locations on
each side) with the vehicle mounting bracket
and secure the unit with the accessory screws.
4
Tighten the screw (ø2 × 5 mm) (Accessory5)
and bracket (Accessory7) in the hole shown
on the diagram.
T
N
T/N
T
N
Accessory7
T : Toyota cars
N : Nissan cars
Accessory5
For Nissan car
For Toyota car
8 mm
MAX.
8mm
MAX.
3
4
ø5mm
ø5mm
76
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Unit
•
Never insert the screws in any other screw hole than the
one specified. If you screw them in another hole, it will
contact and may cause damage to the mechanical parts
inside the unit.
1
Refer to the section <Removing the hard
rubber frame> (page 77) and then remove the
hard rubber frame.
2
3
Remove the screw (M4 × 8) on the back panel.
Removing the hard rubber frame
Insert the two removal tools deeply into the
slots on each side, as shown.
1
Engage the catch pins on the removal tool and
remove the two locks on the upper level.
Upper the frame and pull it forward as shown
in the figure.
Screw (M4×8)
(commercially available)
Lock
Catch
Accessory2
Removal tool
Accessory2
Removal tool
2
When the upper level is removed, remove the
lower two locations.
4
Lower the removal tool toward the bottom,
and pull out the unit halfway while pressing
towards the inside.
•
Be careful to avoid injury from the catch pins on the
removal tool.
•
The frame can be removed from the bottom side in the
same manner.
5
Pull the unit all the way out with your hands,
being careful not to drop it.
English
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
FM tuner section
DVD player section
Frequency Range (200 kHz)
D/A Converter
: 87.9 MHz – 107.9 MHz
: 24 bit
Usable Sensitivity (S/N : 30 dB)
Decoder
: 9.3 dBf (0.8 μV/75 Ω)
: Linear PCM/ Dolby Digital/ dts/ MP3/ WMA
Quieting Sensitivity (S/N : 50 dB)
Wow & Flutter
: 15.2 dBf (1.6 μV/75 Ω)
: Below Measurable Limit
Frequency Response ( 3.0 dB)
Frequency Response
: 30 Hz – 15 kHz
S/N
: 70 dB (MONO)
Sampling frequency; 96 kHz : 20 – 44,000 Hz
Sampling frequency; 48 kHz : 20 – 22,000 Hz
Sampling frequency; 44.1 kHz : 20 – 20,000 Hz
Total Harmonic Distortion
: 0.008 % (1 kHz)
Selectivity ( 400 kHz)
: ≥ 80 dB
S/N Ratio (dB)
: 100 dB (1 kHz)
Stereo Separation
: 40 dB (1 kHz)
Dynamic Range
: 96 dB
Sampling frequency
AM tuner section
: 32/ 44.1/ 48/ 96 kHz
Quantifying bit number
: 16/ 20/ 24 bit
MP3 Decode
Frequency Range (10 kHz)
: 530 kHz – 1700 kHz
Usable Sensitivity (S/N : 20dB)
: 28 dBμ (25 μv)
: Compliant with MPEG-1/2 Audio Layer-3
WMA Decode
: Compliant with Windows Media Audio
78
KDV-412
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio section
General
Preout Level/Load
Operating voltage
: 4000 mV/10 kΩ (CD/CD-CH)
: 14.4 V (11 – 16 V allowable)
Video Out Level/Load
Current Consumption
: 1 Vp-p /75 Ω
: 10 A
Preout Impedance
: ≤ 600 Ω
Installation Size (W × H × D)
: 182 × 53 × 155 mm
7-3/16 × 2-1/16 × 6-1/8 inch
Speaker Impedance
: 4 – 8 Ω
Weight
: 1.4 kg (3.1 lbs)
Maximum output power
: 50 W × 4
Full Bandwidth Power (at less than 1% THD)
: 22 W × 4
Tone action
Bass : 100 Hz 8 dB
Middle : 1 kHz 8 dB
Treble : 10 kHz 8 dB
English
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|