PORTABLE DVD PLAYER WITH
7” ACTIVE MATRIX TFT LCD
Instruction Manual
JD-VD760
Please read this manual carefully before operating and save it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
USER SAFETY GIUDE
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
These markings are located on the bottom, side or back of the unit.
CAUTION: To prevent the risk of electric shock, do not remove cover (or back). Non- user-
serviceable parts inside. Refer servicing to a service professional.
•
•
The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of un-insulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a
person.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating, maintenance and servicing instructions in the literature
accompanying the appliance.
Dripping warning: "This product shall not be exposed to any dripping or splashing, and no
objects filled with liquids, such as vases, shall be placed on or near the product."
Ventilation warning: "The normal ventilation of the product shall not be impeded for intended
use." (Minimum distances must be kept around the apparatus for sufficient ventilation,
especially while use of the apparatus is in tropical and/or moderate climates.)
Dispose of old batteries safely. Do not throw them into a fire.
LASER SAFETY
This unit utilizes laser technology. Only a qualified professional should
remove the cover or attempt to service this device, due to possible eye
injury.
CAUTION
CLASS 1 LASER
•
Use of controls or adjustments or performance of procedure other than
specified herein may result in hazardous radiation exposure.
Hazardous laser radiation when open and interlock defeated.
PRODUCT
•
DANGER
Invisible laser radiation when open and interlock failure. Avoid direct
exposure to beam.
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
USER SAFETY GIUDE
INSTRUCTIONS ON ENVIRONMENT PROTECTION
Do not dispose of this product in the usual household garbage at the end of its life
cycle; bring it to a collection point for the recycling of electrical and electronic
appliances. This symbol on the product means the instructions for use or the
packing will inform about the methods for disposal. The materials are recyclable as
mentioned in its marking. By recycling, material recycling, or other forms of re-
utilization of old appliances, you make an important contribution to protect the
environment. Please inquire at your local community administration for the
authorized disposal location.
IMPORTANT SAFETY PRECAUTIONS
1. READ INSTRUCTIONS - All safety and operating instructions should be read before the
appliance is operated.
2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained in a
secure place for future reference.
3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should
be observed.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
5. WATER AND MOISTURE - The appliance should not be used near water. For example:
near a bathtub, kitchen sink, laundry tub, and swimming pool or even in a wet basement.
6. VENTILATION - The appliance should be situated so that its location and position does not
interfere with its proper ventilation. For example, the appliance should not be situated on a
bed, sofa, rug or similar surface that may block the ventilation openings; or, be placed in a
built-in installation, such as a bookcase or cabinet that may impede the flow of air through the
ventilation openings.
7. HEAT - The appliance should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including amplifiers) that produce heat.
8. POWER SOURCES - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
9. GROUNDING AND POLARIZATION - Precautions should be taken to ensure that the
grounding or polarization of the appliance is correct.
10. POWER CORD PROTECTION - Power supply cords should be routed so that they are not
likely to be walked on or obstructed by items placed upon or against them. Pay particular
attention to cords at plugs, convenience receptacles, and the point at which they exit from
the appliance.
11. CLEANING - The appliance should be cleaned only as recommended by the manufacturer.
12. POWER LINES - An outdoor antenna should be located away from power lines.
13. NONUSE PERIODS - The power cord of the appliance should be unplugged from the outlet
when the appliance is to be left unused for an extended period of time.
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
USER SAFETY GIUDE
IMPORTANT SAFETY PRECAUTIONS – CONTINUED
14. OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids
are not spilled into the device’s openings.
15. CARTS AND STANDS - The appliance should be used only with a cart or
stand that is recommended by the manufacturer. An appliance and cart
combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
16. WALL OR CEILING MOUNTING - If the appliance is mounted to a wall or ceiling, it
should be mounted only as recommended by the manufacturer.
17. DAMAGE REQUIRING SERVICE - The appliance should be serviced by qualified service
professional when:
a. The power-supply cord or plug has been damaged.
b. Objects have fallen into, or liquid has been spilled into the appliance’s apertures.
c. The appliance has been exposed to rain.
d. The appliance has been dropped and suffered damage.
e. The appliance does not appear to operate normally or exhibits a marked change
in performance.
18. SERVICING - The user should not attempt to service the appliance beyond that described
in the user's operating instructions. All other servicing should be referred to qualified
service professional.
19. OUTDOOR ANTENNA GROUNDING - If an outside antenna is connected to the receiver,
be sure that the antenna system is grounded so as to provide some protection against
voltage surges and built up static charges. Section 810 of the National Electrical Code,
ANS/NFPA No. 70-1984 provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
20. PROTECTIVE ATTACHMENT PLUG - The appliance is equipped with an attachment
plug that has an overload protection. This is a safety feature. If replacement of the plug is
required, be sure the service technician has used a replacement plug specified by the
manufacturer that has the same overload protection as the original plug. (UK Version
Only)
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
USER SAFETY GIUDE
FCC NOTICE (USA)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference.
•
FCC regulations state that any change or modification to the equipment, not expressly
approved by maker or its authorized parties, could void user’s authority to operate this
equipment.
•
•
To prevent fire or electric shock, do not expose the unit to rain or moisture.
Never attempt to open the cabinet. Dangerous high voltages are present in the unit.
Always refer servicing to a qualified technician.
IC NOTICE (CANADA)
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television operation
(which can be determined by turning the equipment off), the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
TABLE OF CONTENTS
1. Getting Started
a. Compatibility …………………………………………………………………….
b. Introduction ………………………………………………………………………
c. Location of Controls …………………………………………………………….
d. Location of Controls (Back Panel) …..………………………………………..
7
8
9
10
e. Location of Controls (Remote) ………………………………...……………… 11
f.
Installing the Batteries in the Remote Control ……………………………….
11
12
g. Connecting the Player ………………………………………………………….
2. Operational Instructions
a. System Setup ……….…………………………………………..…………….... 14
b. Language Setup ………………………………………………………………... 14
c. Audio Setup ………...………………………………………………….………..
d. Video Setup ……………………………….…………………………………….
15
15
e. Speaker Setup ………………………………………………………………….. 16
f.
Basic Playback Operation ……………………………………………………..
16
3. Maintenance & Specifications
a. Notes on CDs …………………………………………………………………..
19
19
19
20
21
b. Cleaning the lens ……………………………………………………………….
c. Cleaning the cabinet …………………………………………………………...
d. Troubleshooting…………………………………………………………………
e. Technical specifications ……………………………………………………….
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
GETTING STARTED
COMPATIBILITY
DVD VIDEO
Multi-angle
AUDIO CD
Subtitle choices
Audio choices
TV Aspect Ratio
MP3 CD
Kodak Picture CD
Dolby® Digital
This product incorporates copyright protection technology that is protected by method claims of
certain U.S patents and other intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
The product complies with the Kodak Picture CD format and will display Kodak Picture CDs.
The “Kodak Picture CD Compatible” logo is a trademark of Eastman Kodak Company and is
used with the permission.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992 - 1997 Dolby
Laboratories, Inc. All rights reserved.
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
GETTING STARTED
Thank you for purchasing the JD-VD760. Unpack the unit and make sure to put aside all
accessories so they will not be lost. We recommend that you retain the original carton and
packaging materials for future use, should you transport or ship the unit in the future.
Portable DVD Player with 7” Active Matrix TFT LCD
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
7” TFT LCD
Composite audio/video output
S-video output
Built-in Dolby decoder with coaxial digital audio output
3.5mm stereo headphone jack
Remote control
Built-in stereo speakers
Multiple Angle function
Multiple OSD / menu / subtitle / audio languages
Slow / fast motion play
Playable media: DVD /CD / MP3 / CD-R / CD-RW
Kodak Picture CD compatible
TV System: NTSC / PAL/AUTO
Aspect Ratio: 16:9 / 4:3LB / 4:3PS
Power Sources
o
o
o
AC/DC Power Adapter
Li-Polymer Rechargeable Battery
Cigarette lighter Adapter
What’s Included
•
•
•
•
•
•
•
Portable DVD player
Instruction manual
Remote control
AC/DC power adapter
Cigarette lighter adapter
Rechargeable battery pack
AV cable for TV connection
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
GETTING STARTED
Location of Controls
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
GETTING STARTED
Location of Controls-continued
1. TFT SCREEN
2. SPEAKERS
17. VOLUME+ KEY
18. STOP KEY
3. MENU KEY
19. PLAY/PAUSE KEY
4. SEARCH KEY
5. PREVIOUS &F.BWD KEY
6. TITLE KEY
7. AUDIO KEY
8. SUBTITLE KEY
9. SETUP KEY
10. NEXT&F.FWD KEY
11. DISC COVER LIFT AREA
12. DISC COVER
13. DISC COVER OPEN KEY
14. NAVIGATION LEFT KEY
15. DISPLAY KEY
16. VOLUME- KEY
20. NAVIGATION UP KEY
21. OK/ENTER KEY
22. NAVIGATION RIGHT KEY
23. NAVIGATION DOWN KEY
24. PHONES SOCKET
25. VIDEO/AUDIO OUT SOCKET
26. S-VIDEO SOCKET
27. COAXIAL SOCKET
28. POWER ON/OFF SWITCH
29. DC 9V INPUT SOCKET
30. ON/STANDBY INDICATOR
31. REMOTE SENSOR
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
GETTING STARTED
Location of Controls-Remote
1. POWER BUTTON
2. VOLUME BUTTONS
3. REPEAT BUTTON
4. MENU BUTTON
5. SUBTITLE BUTTON
6. PLAY BUTTON
7. TITLE BUTTON
8. AUDIO BUTTON
9. PAUSE/STEP BUTTON
10. F.BWD BUTTON
11. F.FWD BUTTON
12. ANGLE BUTTON
13. ZOOM BUTTON
14. DISPLAY BUTTON
15. SETUP BUTTON
16. SCREEN ON/OFF
BRI/COL BUTTON
17. NUMERIC BUTTONS
18. CLEAR BUTTON
19. STOP BUTTON
20. ENTER BUTTON
21. NAVIGATION BUTTONS
22. SLOW BUTTON
23. NEXT BUTTON
24. PREV BUTTON
25. SEARCH BUTTON
26. PROGRAM BUTTON
Replacing the Battery in the Remote Control
The remote control battery has been previously installed and ready
for operation for the first time use. When the remote control stops
functioning, replace the battery with a new one. To do so, locate the
battery compartment and follow the steps below:
1. Slide out the battery holder from the remote control case.
2. Insert a “CR2025” 3V lithium battery making certain to follow
the correct polarity. Observe the corresponding symbols (+/-).
3. Secure battery and push the battery holder back into the remote control until it is fully
inserted.
When not in use – Remove the battery if the unit will not be used for several months or more.
Notes on battery usage - To prevent battery leakage, which may result in bodily injury,
property damage or damage to the unit, follow these instructions:
a. Install all batteries correctly according to the polarity (+/-) as marked on the unit.
b. Do not mix old and new batteries, carbon and alkaline, etc.
c. Remove batteries from the unit when the device will not be used for an extended period
of time.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
GETTING STARTED
Connecting the Player to a TV or Amplifier
When connecting the JD-VD760 to other devices, it is recommended that a multi-system
television is used. Before connecting this unit to a TV or amplifier, make certain that all devices,
including the JD-VD760 are switched off, all AC cords are disconnected from wall outlets, and
that ventilation holes are not blocked.
•
Observe the color coding of all audio and video cables, matching them with the output
jacks on all connected devices.
AV Cable
S-video cable
(optional)
TV Set
JD-VD760
Coaxial Digital
Audio Cable
Decoder or Amplifier
(sold separately)
Once the JD-VD760 and all other appliances are securely connected, plug all units into AC wall
outlets and switch the power on.
After connection is firmed and securely done, plug AC ADAPTER to an applicable wall outlet
and turn on the player.
S-VIDEO OUTPUT CONNECTORS
The S (separate) video output connector separates the color (C) and luminance (Y) signals
before transmitting them to the TV set in order to achieve a sharper picture.
Use the S-video cable when connecting the player to a TV set equipped with an S-Video input
connector for the best picture clarity possible.
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
GETTING STARTED
V11M11_IM_EN_05302008
COAXIAL DIGITAL AUDIO OUTPUT
When a DVD recorded in Dolby Digital/DTS is played, Dolby digital/DTS bitstream is output
from the player's COAXIAL digital audio output connector. When the player is connected to a
Dolby Digital/DTS decoder , you can enjoy theater-like audio quality at your home. [A coaxial
audio cable (not included) is required when an optional Dolby digital/DTS decoder is used.]
Connecting the Player to the Car Adapter
The included 9V car (cigarette lighter) adapter is designed for use in vehicles with a 12V
negative grounded electrical system (most current automobile models).
Warning: Always disconnect the car adapter when not in
use. Do not use the car adapter in 24V vehicles.
To cigarette lighter socket
•
Use only with 9V car adapter. Use of a higher-powered adapter, may
cause damage to this unit.
•
•
•
Do not use other equipment with the JD-VD760.
Make sure the cigarette lighter socket is cleaned before use.
After use, disconnect the 9V car (cigarette lighter) adapter from both the
JD-VD760 and the cigarette lighter socket.
Turning on the Unit
To turn on the JD-VD-760, slide the POWER switch on the side of the unit to ON or press the
POWER button on the remote control. (If connected to an amplifier or TV set, turn the
connected device ON)
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
OPERATIONAL INSTRUCTIONS
System Setup
The SYSTEM SETUP options are illustrated below:
1. TV SYSTEM
Choose the TV system best suited for your TV set.
Available options are PAL, NTSC or AUTO. See
user’s manual for your TV set for guidelines.
2. LCD MODE
Choose the LCD mode. Available options are 4:3 or 16:9
3. TV TYPE
Depending on the TV screen to which you output, choose from aspect ratios 16:9, 4:3 LB, or
4:3 PS, Refer to the user’s manual of your TV set for guidelines.
•
•
16:9: The picture fills the screen using a wide screen angle.
4:3 LB: Letter Box, two black bands appear in the upper and lower portions of the
screen.
•
4:3 PS: Pan and Scan, the image is cut in order to fill the entire screen.
4. DEFAULT
This option restores the unit to factory settings.
Language Setup
The Language Setup options are illustrated below:
Note: The disc must be encoded with multiple
languages in order to use these options. When your
preferred language choice is not available, the disc
will use its default language.
1. OSD LANGUAGE
Highlight the OSD LANGUAGE option to choose the preferred language for On-Screen Display.
Use the NAVIGATION buttons to highlight a language and press the ENTER button to confirm.
2. AUDIO LANG
Highlight the AUDIO LANG option using the NAVIGATION buttons to choose the language you
prefer. Press the ENTER button to confirm.
3. SUBTITLE LANG
Highlight the SUBTITLE LANG option using the NAVIGATION buttons to choose the language
you prefer. Press the ENTER button to confirm.
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
OPERATIONAL INSTRUCTIONS
4. MENU LANG
Highlight the MENU LANG option using the NAVIGATION buttons to choose the language you
prefer. Press the ENTER button to confirm.
Audio Setup
The Audio Setup options are illustrated below:
AUDIO OUT
Highlight the AUDIO OUT option using the
NAVIGATION buttons to choose the mode you
prefer. Press the ENTER button to confirm. There
are three modes available: SPDIF/OFF,
SPDIF/RAW, and SPDIF/PCM. Make sure you
choose the option based on the devices to which
you have connected. Refer to the owner’s manuals
for all connected devices for guidelines.
Video Setup
The Video Setup options are illustrated below:
1. BRIGHTNESS
Highlight the BRIGHTNESS option using the Up
and Down (ST) NAVIGATION buttons to adjust
the brightness.
Note: The BRI/COL (Brightness/Color) feature can be used by pressing this button on the
remote control once for brightness or twice for color. Use the left and right (WX) buttons to
make changes.
2. CONTRAST
Highlight the CONTRAST option using the Up and Down (ST) NAVIGATION buttons to adjust
the contrast.
3. HUE
Highlight the HUE option using the Up and Down (ST) NAVIGATION buttons to adjust the
hue.
4. SATURATION
Highlight the SATURATION option using the Up and Down (ST) NAVIGATION buttons to
adjust the saturation.
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
OPERATIONAL INSTRUCTIONS
Speaker Setup
The Speaker Setup options are illustrated below:
•
DOWNMIX
o
LT/RT: Choose this setting when connected
to a 2-channel analog audio
input.
o
STEREO: Choose this setting when the
DVD player is connected to a TV
or modulator.
Basic Playback Operation
Place a disc in the tray. Playback will start automatically.
1. ADJUSTING THE VOLUME
Press the VOLUME+ button to increase the volume or the VOLUME – button to reduce
the volume.
2. SKIP FORWARD/BACKWARD
Press the NEXT SKIP or PREV SKIP buttons once to skip a chapter (on a DVD) or track
(on a VCD/CD) forward of backward.
3. FAST FORWARD/BACKWARD
During playback (CD/DVD/VCD), press the F.FWD button or F.BWD button on the remote
control or press and hold the F.FWD button or F.BWD button on the main unit to scan
forward or backward on the disc. Speed increased at X2, X4, X8, or X20 normal speed.
Press the PLAY button to resume normal playback.
4. PAUSE/STEP FUNCTION
During playback, press the PAUSE/STEP button to pause. While in Pause mode, press
the PAUSE/STEP button to play one frame with each press. Press the PLAY button to
resume normal playback.
5. STOP
During playback press the STOP button to stop playback. Press the STOP button to
activate the Resume function so that when the PLAY button is pressed, the playback will
resume at the same place where playback stopped. To disable this function, press the
STOP button again.
6. SLOW MOTION PLAYBACK (DVD/VCD)
During Playback, press the SLOW button to decrease the playback speed to 1/2 normal
playback speed. Press the SLOW button repeatedly to decrease the speed as low as 1/7
normal playback speed. Press the PLAY button to resume normal playback.
7. REPEAT
During playback, press the REPEAT button to repeat one chapter/title or repeat all (for a
DVD), or to repeat a track or all tracks (on a VCD or CD) or to repeat sections between
two points (A-B).
Note: The Repeat function only works on VCDs in the PBC OFF mode.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
OPERATIONAL INSTRUCTIONS
Basic Playback Operation-continued
8. SEARCH
•
During playback, press the SEARCH button to choose a title, chapter, or chapter time
to be played. Use the NAVIGATION buttons to select.
•
•
Use the Number keys to make the selection.
Press the OK button on the main unit or the ENTER button on the remote control to
confirm and begin playback from the selected item.
•
Press the SEARCH button again to exit this function.
9. PROGRAMMED PLAYBACK
This unit has 16 a track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. Program up to 16 tracks or program certain
tracks to play more than once. To perform programmed playback, proceed as follows:
•
While in the STOP mode, press the PROGRAM button. The program window will
appear on the screen.
•
Press the numeric buttons to input 2 numbers for each track: one for title and the
other for chapter. After inputting 2 numbers, the cursor will automatically jump to the
next program track, awaiting the input of the next numbers.
•
•
•
Repeat step 2 until all the desired titles and chapters have been programmed (up to
20). You can repeat a title and a chapter more than once if desired.
Use the NAVIGATION buttons to select the START position, and then press the
PLAY button to begin the programmed play.
To clear Programmed items, press the CLEAR button on the remote control. To clear
all items, select the Clear option from the menu and press the OK button on the main
unit or the ENTER button on the remote control.
•
To cancel the program function, press the PROGRAM button.
10. ZOOM
This player can magnify a picture. Press the ZOOM button to zoom during normal, slow or
still playback mode. Use the Navigation Buttons to select the desired part of the zoomed
picture.
Note: This function only works with DVD and VCD discs.
11. ON SCREEN DISPLAY (OSD) INFORMATION
Press the DISPLAY button to show the elapsed and remaining time of the playing disc.
Each time the DISPLAY button is pressed, the time will change on the screen as follows:
•
•
•
DVD: Title Elapsed Ö Title Remain Ö Chapter Elapsed Ö Chapter Remain Ö
Display Off
VCD & CD: Single Elapsed Ö Single Remain Ö Total Elapsed Ö Total Remain Ö
Display Off
MP3 CD: Single Elapsed Ö Single Remain Ö (Return)
12. AUDIO FEATURE
While playing a DVD or VCD, you can cycle between the audio modes. Press the AUDIO
button to cycle through the audio modes. The audio modes vary depending on the disc
inserted, but include MONO LEFT, MONO RIGHT, or STEREO.
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
OPERATIONAL INSTRUCTIONS
Basic Playback Operation-continued
13. MULTI-ANGLE VIEWING
Some DVD discs may contain scenes which have been shot simultaneously from a
number of different camera angles. This function depends on a disc.
•
•
Play a DVD disc that is recorded with multiple angles.
Press the ANGLE button. If the disc contains different angled views, it will show the
movie with the chosen different angle.
•
To return the normal angle view, press the ANGLE button again.
14. SUBTITLE FEATURE
Press the SUBTITLE button to select a subtitle language. To turn off the subtitle, press the
SUBTITLE button repeatedly. This feature is not available on all discs.
15. PBC FEATURE
When playing a VCD with PBC function, you can enjoy simple interactive software on the
TV screen. By turning on this function, desired tracks can be selected by pressing the
numeric buttons. This feature is enabled only when a VCD2.0 disc supports the PBC
feature. After selecting a track, press the ENTER button to start playing the selected track.
Press the MENU and choose PBC ON/OFF to activate or deactivate the function
16. MP3 PLAYBACK
•
•
Load an MP3 CD into the disc tray. All folders will display on the screen.
Select the desired folder using the NAVIGATION buttons and press the OK button on
the main unit or ENTER button on the remote control to confirm.
Use the NAVIGATION buttons to select the desired song and press the OK button on
the main unit or the ENTER button on the remote control to confirm. Playback will
begin automatically.
•
•
•
Press the NEXT or PREV buttons to select a track directly
Press the REPEAT button to change the play mode: REPEAT 1 repeats one file;
REPEAT DIR repeats all tracks in the current album; REPEAT ALL repeats all tracks
on the current disc; REPEAT OFF cancels the repeat modes.
17. KODAK PICTURE CD/JPEG CD PLAYBACK
For Kodak picture CDs or JPEG CDs follow these instructions:
•
Play Modes- Press the REPEAT button to change the play modes: REPEAT 1
repeats one file; REPEAT DIR repeats all tracks in the current album; REPEAT ALL
repeats all tracks on the current disc; REPEAT OFF cancels the repeat modes.
Next/Previous Picture- Press the NEXT button to skip to the next picture or the
PREV button to view the previous picture. If no button is pressed, it will skip to the
next picture automatically
•
•
•
•
Rotating the Picture- Press the right and left NAVIGATION buttons to rotate the
pictures clockwise and counter-clockwise.
Inverting the Picture- Press the up or down NAVIGATION buttons to flip a picture
vertically or horizontally.
Zoom- Press the ZOOM button continuously to zoom in by 2, 3 or 4 times and to
zoom out by 1/2, 1/3, 1/4 the original size. Use the NAVIGATION buttons to select a
certain part of the picture to zoom.
•
Slide Show Transition- Suring slide show playback, press the PROGRAM button to
enter the slide show transition mode. This mode lets you choose how the pictures will
transition from one to the next. A list of options will appear on the screen. Use the
NAVIGATION buttons to select.
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
OPERATIONAL INSTRUCTIONS
Notes on CDs
1. Before playing, clean the CD with a cleaning
cloth. Wipe the CD from the center out to the
ends.
2. Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static
spray intended for vinyl LPs.
3. Do not expose the CD to direct sunlight or heat sources such as hot air ducts. Do not
expose to direct sunlight, nor leave CDs in a car, as there can be a considerable rise
in temperature.
4. Do not stick paper or sticker on the CD. Do not scratch, dirt or fingerprints on the CD,
for it may cause tracking error.
Cleaning the lens
If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a
commercially available lens cleaner.
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or
benzine.
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
TROUBLESHOOTING GUIDE
When the instructions in this manual are followed, this unit should function properly. However, if
any of the following difficulties occur and cannot be corrected by the user or if a problem arises
that is not mentioned here, please contact jWIN Customer Service or a qualified service
technician.
1. Unit Does Not Play
•
•
•
•
Unit may be disconnected from power source. Check connection.
Disc is not correctly set. CDs should be inserted label side up.
Disc is scratched or dirty. Please clean.
The lens is dirty. Wipe clean gently with soft, dry cloth. Follow the instructions of the
lens cleaner.
•
There is moisture on the lens wait an hour and try again.
2. No Sound or Feedback
•
•
•
•
Ensure plugs are inserted firmly.
Wipe off plugs with clean cloth.
Disc is scratched or dirty. Please clean.
Volume control is turned down. Please increase.
3. Sound from Only One Side (or inverted)
•
•
•
Speaker cords are not properly connected.
Input cords are not properly connected.
Left/Right balance may not be properly adjusted.
4. No Sound from center/surround speakers
•
•
Downmix settings are incorrect. Please adjust settings.
Disc or program is only recorded in stereo. Set Pro Logic II on.
5. No Picture
•
•
Video equipment may be disconnected. Check connections.
Incorrect output setting for video function. Check Output settings in general setup.
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable DVD Player with 7” Active Matrix TFT LCD
V11M11_IM_EN_05302008
SPECIFICATIONS
•
•
•
•
•
Solution: Sunplus SPHE8202D
Loader: Samsung SP1CHU
TV System: NTSC / PAL/AUTO
Aspect Ratio: 16:9 / 4:3LB / 4:3PS
LCD Panel
o
o
Diagonal Size: 7"
Viewing Angles: (-60 ~ 60 Horizontal) / (-60 ~ 40 Vertical) (Typ.)
•
•
Audio Output Power
o
o
RMS output at 10% THD: 0.12W
Maximum output: 1.2W
Inputs & Outputs
o
o
o
Video /Audio Output Socket
3.5mm Stereo Headphone Jack
Power Adapter (AC/DC and Car) Input Jack
•
•
Power Sources
o
o
o
9V (AC/DC) Power Adapter
Ni-MH Rechargeable Battery (7.4V / 2600mAh)
Cigarette lighter Adapter
Power Consumption: 15W
Specifications and features are subject to change without prior notice.
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TEL: 516-626-7188
FAX: 516-626-7105
© 2008 jWIN Electronics Corp. All rights reserved. No portion of this printed material or product
enclosed herewith including design, shape and graphics, may be reproduced or transmitted in
any form without prior written consent of jWIN Electronics Corp. by any means, electronic or
mechanical, including photocopying, recording or use of an information storage and retrieval
system. Any unauthorized distribution or reproduction of this printed material or product, or any
portion thereof, will be prosecuted to the fullest possible extent of the law.
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|