| 	
		 MZ7TFT   
					Installation and Operation Manual   
					MZ7TFT   
					TOUCH PANEL 7-INCH TFT LCD   
					POWER   
					IR   
					AV-IN   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				MZ7TFT   
					Wiring   
					1. Align the ridges on either end of the combined input cable (VIDEO IN,   
					AUDIO L, AUDIO R, REAR TS, GROUND and ACC) and connect the   
					cable to the male connector on the back of the MZ7TFT. The connector   
					will only fit when the notched areas are properly aligned.   
					2. Connect the REAR TS connector to the MZ7-TFT connector on the back   
					of your compatible head unit (if applicable).   
					NOTE: You can connect up to three monitors to your compatible head   
					unit using the Touch Screen Expansion Module (included). See “Touch   
					Screen Expansion Module” on page 4 for instructions.   
					3. Connect the AUDIO R, AUDIO L and VIDEO IN connectors to the Video   
					and Audio output (Headphone Multizone) cables on the back of your   
					compatible head unit or to another auxiliary device for which you would   
					like to output video.   
					4. Connect the black GROUND wire to the factory ground wire on your head   
					unit, or to a clean, unpainted metal part of the automobile chassis using a   
					ring terminal and a sheet metal screw.   
					5. Connect the ACC wire to the factory accessory or ignition wire, which   
					receives power when the key is turned on.   
					Red   
					Yellow   
					White   
					Black   
					AUDIO R (right)   
					VIDEO IN   
					AUDIO L (left)   
					REAR TS   
					GROUND   
					ACC   
					Figure 1: Wiring Connections   
					3 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				MZ7TFT   
					Touch Screen Expansion Module   
					1. Connect the AUDIO R and AUDIO L cables from the MZ7TFT to the Mul-   
					tizone Headphone cables on the back of your compatible head unit.   
					2. Connect the VIDEO IN cable from the MZ7TFT to the Video Out cable on   
					the back of your compatible head unit.   
					HEAD UNIT   
					3. Connect the MZ7-TFT connector from the back of your compatible head   
					unit to the REAR_TS_OUT connector on Side 1 of the Expansion Module.   
					4. Connect the REAR TS connector from the back of the MZ7TFT to the   
					REAR_TS_IN 1 connector on Side 2 of the Expansion Module.   
					5. Connect the REAR TS connectors for additional TFT screens to the   
					REAR_TS_IN 2 and 3 connectors.   
					Top View   
					NOTE: The touchscreen feature of the MZ7TFT is compatible only with a   
					receiver with an MZ7-TFT output connector. Otherwise the "Touch   
					Screen" function will not operate.   
					Side 2 View   
					Side 1 View   
					EXPANSION   
					MODULE   
					REAR_TS_IN   
					2 
					REAR_TS_OUT   
					1 
					3 
					REAR TS (Black)   
					MZ7-TFT   
					3RD   
					MONITOR   
					2ND   
					MONITOR   
					MZ7TFT   
					Red   
					AUDIO R (Red)   
					White   
					AUDIO L (White)   
					VIDEO IN (Yellow)   
					VIDEO OUT (Yellow)   
					4 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				MZ7TFT   
					Installation/Mounting   
					Figure 2: Attach Bracket/Secure Bracket   
					1. Insert the metal end of the center arm on the mounting bracket into the   
					slot on the back of the monitor.   
					2. Turn the large plastic nut to secure the bracket to the monitor.   
					3. Tighten the smaller plastic nut to further secure the bracket.   
					Figure 3: Install Headrest/Tighten and Adjust   
					4. Install the headrest through the holes in the headrest mounting pieces on   
					either end of the mounting bracket.   
					5. Use the Allen wrench provided to loosen the headrest mounting pieces on   
					either end and rotate, if necessary, to achieve the appropriate depth.   
					6. Use the Allen wrench provided to secure the headrest mounting pieces to   
					the headrest poles.   
					7. Position the monitor at the desired angle, and then use the Allen wrench   
					to tighten the other side of the headrest mounting pieces and prevent   
					them from rotating.   
					8. Once installed, use the knob on the top of the center arm of the mounting   
					bracket to tilt or rotate the monitor. Tighten when finished.   
					5 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				MZ7TFT   
					Operation   
					Power On/Off/Standby   
					The input allows voltage ranges from DC 10.8V to 16V, which includes the DC   
					12V car power supply.   
					NOTE: Your head unit must be compatible with the MZ7TFT touch   
					screen capability for the IR remote repeater function to work.   
					After connecting the power, the monitor will be in standby mode. Press the   
					POWER button to turn the monitor on. Press and hold the POWER button to   
					return the unit to standby mode.   
					3. AV-IN: Audio/video input connector (AUX AV IN).   
					4. Touch Screen   
					5. Infrared Transmitter Array: Do not block or cover this area, as it will   
					Controls and Indicators   
					affect audio transmission to headphones.   
					NOTE: Your head unit must be compatible with the MZ7TFT touch   
					screen capability for the Touch Screen function to work.   
					IR Interference   
					When used in or near direct sunlight, you may experience loud background   
					noise or a low audio signal. This is inherent in Infrared Ray communication   
					and does not mean there is a problem with the MZ7TFT itself.   
					If you use the MZ7TFT by a window with bright sunlight, draw the curtains/   
					blinds to shut out the direct sunlight, or use the MZ7TFT away from the   
					sunlight.   
					Menu Operation   
					MZ7TFT   
					TOUCH PANEL 7-INCH TFT LCD   
					While the monitor is turned on, press the POWER button to access the “MAIN   
					MENU” on the MZ7TFT screen. Touch a main menu selection to see the   
					corrresponding sub-menu.   
					POWER   
					IR   
					AV-IN   
					• 
					• 
					• 
					EXIT: To exit the menu from any level, touch the EXIT option on screen.   
					PICTURE: Adjust the Brightness, Color, Contrast or Tint from -15 to +15.   
					FUNCTION   
					5 
					2 
					1 
					3 
					5 
					4 
					Figure 4: Front Panel Controls   
					• 
					• 
					• 
					• 
					• 
					BLUE SCREEN (ON/OFF)   
					VIDEO IMAGE (NORMAL/IMAGE (MIRROR))   
					DISPLAY MODE ( NORMAL/FULL)   
					1. POWER: Red illumination indicates standy mode, blue indicates working   
					state.   
					AUTO DIMMER (ON/OFF): Useful for Daytime/Nighttime viewing   
					DIMMER SCOPE (-30 to 0), -30 being more dim   
					NOTE: The LCD backlight will turn off after 10 seconds without signal   
					input.   
					• 
					SOURCE   
					• 
					• 
					SOURCE (AV1/AUX AV IN):   
					2. IR: Remote signal repeater allows you to control your compatible head   
					IR AUDIO (A/B/OFF): If there is more than one (1) MZ7TFT in use   
					simultaneously, each headphone must be set to receive on a different   
					unit using the head unit’s remote control.   
					6 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				MZ7TFT   
					channel, and each MZ7TFT must be set to transmit on the same   
					channel as the headphone (i.e., left seat monitor/headphones set to   
					channel A and right seat monitor/headphones set to channel B). This   
					will prevent interference of audio by the IR signal being transmitted   
					from two monitors on the same channel. This is inherent in Infrared   
					Ray communication and does not mean there is a problem with the   
					MZ7TFT itself.   
					Selecting the Input Signal   
					The unit is provided with a AV-IN jack on the front of the monitor, as well as   
					AV1 inputs for your head unit or other device with composite video and line   
					level audio output.   
					When connecting the monitor to an alternate A/V device, you can plug an A/V   
					cable (Figure 5) into the AV-IN input jack, and then plug the red, white and   
					yellow RCA connectors into your A/V device.   
					• 
					SCREEN ADJUST   
					Composite Video   
					Audio Return   
					Audio Right   
					Audio Left   
					Red   
					1 
					Yellow   
					2 
					White   
					3 
					Figure 5: A/V Cable (not included)   
					1. Audio Input 1   
					2. Audio Input 2   
					3. Composite Video   
					After connecting a device using an A/V Adapter Cable, press the POWER   
					button on the front of the monitor to access the MAIN MENU. Select   
					SOURCE and then select “AUX AV IN” for the SOURCE option.   
					7 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				MZ7TFT   
					Care and Maintenance   
					• 
					Do not remove the rear panel of this product. If in need of service, please   
					call a qualified technician.   
					• 
					Keep away from strong light while using this product so as to obtain the   
					clearest and the most colorful picture.   
					• 
					• 
					Avoid heavy impact, do not drop.   
					Do not use chemical solutions to clean this unit. Please wipe with a clean   
					soft cloth to keep brightness of the surface.   
					• 
					Do not expose this product to direct sunlight, heat or humid conditions.   
					Specifications   
					Video input: 2 channels CVBS   
					Audio input: 2 channels stereo   
					Audio output: Infrared modulation   
					Monitor specification: 7 inch color TFT LCD   
					Pixel: RGB 234 x 1440   
					Power: 10.8~16V, Negative grounding   
					Max. current: 1A   
					Standby current: <5mA   
					Video input amplitude: 1v-pp, 75 ohm load   
					Audio input amplitude: 2Vrms max   
					Operating temperature: -10°C~+60°C   
					IR carrier frequency:   
					• 
					• 
					A Channel: 2.3/2.8MHz±100ppm   
					B Channel: 3.2/3.8MHz±100ppm   
					IR wavelength: 850nm   
					Modulation mode: Frequency modulation (FM)   
					Range of IR emitting:   
					• 
					• 
					Frontage: 5m   
					Left and right / up and down (30º): 2m   
					8 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Limited Warranty   
					DO NOT RETURN THIS PRODUCT TO THE STORE   
					Audiovox Electronics Corporation (“the Company”) is committed to   
					quality and customer service, and are pleased to offer you this   
					Warranty. Please read it thoroughly and contact the Company at 1-800-   
					323-4815 with any questions.   
					Limitations   
					THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY   
					IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND,   
					IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE   
					PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.   
					Who is covered?   
					The Company extends this warranty to the original retail purchaser of products   
					purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or   
					Canada. This warranty is not transferable or assignable. Proof of purchase is   
					required in the form of an original sales receipt.   
					This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED   
					WARRANTIES,   
					INCLUDING   
					ANY   
					IMPLIED   
					WARRANTY   
					OF   
					MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS   
					WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY   
					HEREUNDER   
					INCLUDING   
					ANY   
					IMPLIED   
					WARRANTY   
					OF   
					What is covered?   
					MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 36   
					MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE   
					COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL   
					DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS   
					OR IMPLIED, WHATSOEVER. No person or representative is authorized to   
					assume for the Company any liability other than expressed herein in connection   
					with the sale of this product.   
					The Company warrants that should this product or any part thereof, under normal   
					use, be proven defective in material or workmanship within 36 months from the   
					date of original purchase, such defect(s) will be repaired or replaced with a new or   
					reconditioned product (at the Company's option) without charge for parts and   
					repair labor.   
					What is not covered?   
					This Warranty does not cover the following:   
					Some states do not allow limitations on how long an implied warranty lasts or the   
					exclusion or limitation of incidental or consequential damage so the above   
					limitations or exclusions may not apply to you. This Warranty gives you specific   
					legal rights and you may also have other rights which vary from state to state.   
					• 
					Damage incurred during shipping or transporting the product to the   
					Company or a service center   
					• 
					• 
					• 
					• 
					• 
					Elimination of car static or motor noise   
					Defects in cosmetic, decorative or non-operative structural parts   
					Correction of antenna problems   
					Costs incurred for installation, removal or reinstallation of the product   
					Consequential damage to compact discs, USB devices, digital media   
					cards, accessories or vehicle electrical systems   
					Obtaining Warranty Service   
					• 
					To obtain repair or replacement within the terms of this Warranty,   
					call 1-800-323-4815 for the location of a warranty station serving   
					your area.   
					• 
					• 
					• 
					Damage caused by improper installation, mishandling, misuse, neglect,   
					accident, blown fuse, battery leakage, theft or improper storage   
					Products whose factory serial number/bar code label(s) or markings   
					have been removed or defaced   
					Damage resulting from moisture, humidity, excessive temperature,   
					extreme environmental conditions or external natural causes   
					• 
					You must prepay the initial shipping charges to the Company.   
					The Company will pay the return shipping charges for all   
					warranteed products returned to an address within the U.S.A.,   
					Puerto Rico or Canada.   
					Please package the product securely to avoid shipping damage.   
					We recommend using a carrier that provides tracking service to   
					prevent lost packages. Lost or damaged packages are not   
					covered by this warranty.   
					• 
					• 
					Please review the “Care and Maintenance” section of your Installation   
					and Operation Manual for additional information regarding the proper   
					use of your product.   
					Provide a detailed description of the problem(s) for which you   
					require service.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Audiovox Electronics Corporation   
					Hauppauge, NY 11788   
					Technical Assistance: 1-800-645-4994   
					
					© 2008 Audiovox   
					Ver. 121907   
					Printed in China   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |