CHEMICAL SANITIZING DISHMACHINE
INSTALLATION/OPERATION & TECHNICAL
MANUAL
FOR JACKSON MODELS:
Delta 5
Delta 5 D
Jackson WWS, INC.
P.O. BOX 1060
HWY. 25E
BARBOURVILLE, KY. 40906
PHONE (606) 523-9795
March 8, 2013
P/N 7610-003-37-08 (Revision D)
FAX (606) 523-9196
Download from Www.Somanuals.com. All Manuals Search And Download.
STOP!
PARE!
ARRET!
CALL 1-888-800-5672 TO REGISTER THIS PRODUCT!
FAILURE TO DO SO WILL VOID THE WARRANTY!
LLAME AL 1-888-800-5672 PARA REGISTRAR ESTE PRODUCTO!
AL NO HACERLO LA GARANTIA SERA ANULADA!
S.V.P. APPELER 1-888-800-5672 POUR ENREGISTRER CE PRODUIT,
LA GARANTIE SERA ANNULEE POUR TOUT PRODUIT NON- ENREGISTREE
Download from Www.Somanuals.com. All Manuals Search And Download.
REVISION/ REVISION
MADE APPLICABLE
DETAILS
PAGE
DATE
BY
ECN
A
05-25-2007
MAW
N/A
Release to production.
24
10-04-2007
MAW
7934
Changed cover on power junction box.
10
B
05-20-2009
04-26-2012
ARL
RLC
QOF 339
QOF 386
Updated programming page diagram.
Updated location of door switch on schematic.
C
D
04-27-2012
03-08-13
RLC
RLC
QOF 386
Added EnergyStar logo.
QOF NDB-219 Updated company logo
i
Download from Www.Somanuals.com. All Manuals Search And Download.
NOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL
Delta 5
Delta 5 - Low temperature, chemically sanitizing, with a booster tank. Detergent, rinse aid & sanitizer
chemical feeder pumps
Delta 5 D - Dual door. Low temperature, chemically sanitizing, with a booster tank. detergent, rinse
aid & sanitizer chemmical feeder pumps
Jackson WWS, INC. provides technical support for
all of the dishmachines detailed in this manual. We
strongly recommend that you refer to this manual
before making a call to our technical support staff.
Model:
Serial No.:
Please have this manual with you when you call so
that our staff can refer you, if necessary, to the prop-
er page. Technical support is available from 8:00
a.m. to 5:00 p.m. (EST), Monday through Friday.
Technical support is not available on holidays.
Contact technical support toll free at 1-888-800-
5672. Please remember that technical support is
available for service personnel only.
Installation Date:
Service Rep. Name:
Phone No.:
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
SECTION
I.
DESCRIPTION
PAGE
SPECIFICATION INFORMATION
Specifications
Dimensions
2
3
II.
INSTALLATION/OPERATION INSTRUCTIONS
Installation Instructions
5
Electrical Installation Instructions
Operation Instructions
6
7
Chemical Dispensing Equipment
Universal Timer Operation
Detergent Control
9
10
11
III.
IV.
PREVENTATIVE MAINTENANCE
13
16
TROUBLESHOOTING SECTION
Common Problems
V.
PARTS SECTION
Chemical Feeder Pump Assembly
Solenoid Valve Repair Parts
Control Box Assembly
Peripump Box Assembly
Electrical Connection Box Assembly
Frame Assembly
Hood Assembly
Switch Panel Assembly
Tub Assembly
Frame & Motor Assembly
Pump and Motor Assembly
Booster Tank Assembly
Incoming Plumbing Assembly
Door Components
18
19
22
23
24
25
26
27
29
31
32
33
34
35
36
Front Panel Assembly
VI.
ELECTRICAL SCHEMATICS
Delta 5 (115 Volt, 60 Hz, Single Phase)
38
40
VII.
JACKSON MAINTENANCE & REPAIR CENTERS
i
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1:
SPECIFICATION INFORMATION
1
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1: SPECIFICATION INFORMATION
SPECIFICATIONS OF THE DELTA 5
F
ELECTRICAL REQUIREMENTS:
OPERATING CAPACITY ( NSF RATED):
WASH PUMP MOTOR HP
3/4
RACKS PER HOUR
DISHES PER HOUR
GLASSES PER HOUR
29
725
725
RINSE
HEATER
TYPICAL
TOTAL ELECTRICAL
VOLTS
115
PH
1
HZ
60
RATINGS
2KW@110V
AMPS
*16 A
CIRCUIT
20 AMP
OPERATING CYCLES (SECONDS):
NORMAL CYCLE:
* This dishmachine is designed so that the wash motor is never
running when the wash heater is on. Service load is based upon
the higher of the two amperages.
WASH TIME
RINSE TIME
TOTAL CYCLE TIME
45
25
90
NOTE: Typical Electrical Circuit is based upon (1) 125% of the
full amperage load of the machine and (2) typical fixed-trip
circuit breaker sizes as listed in the NEC 2002 Edition. Local
codes may require more stringent protection than what is
displayed here. Always verify with your electrical service
contractor that your circuit protection is adequate and meets
all applicable national and local codes. These numbers are
provided in this manual simply for reference and may change
without notice at any given time.
WASH TANK CAPACITY (GALLONS):
WASH PUMP CAPACITY (GPM):
OPERATING TEMPERATURES:
1.2
61
FRAME DIMENSIONS:
WASH (MINIMUM)
WASH (RECOMMENDED)
RINSE (MINIMUM)
(48.9°C) 120°F
(60.0°C) 140°F
(48.9°C) 120°F
(60.0°C) 140°F
WIDTH
DEPTH
(622.3mm)
(641.35mm)
(933.45mm)
(990.6mm)
24 1/2”
25 1/4”
36 3/4”
39”
RINSE (RECOMMENDED)
DEPTH, WITH FRONT DOOR OPEN
HEIGHT
MAXIMUM WASH
CHAMBER CLEARANCE
WATER REQUIREMENTS:
(292.1mm)
11 1/2”
WATER LINE SIZE NPT
DRAIN LINE SIZE NPT
FLOW PRESSURE
1/2”
2”
20 5 PSI
FRAME DIMENSION (DOUBLE DOOR):
WIDTH
DEPTH
(622.3MM)
(714.375MM) 28 1/8”
24 1/2”
DEPTH, WITH DOOR OPEN
HEIGHT
(1311.275MM)
(990.6MM)
51 5/8”
39”
MINIMUM CHLORINE REQUIRED (PPM):
50
CHAMBER CLEARANCE
(292.1MM) 11 1/2”
NOTE: Always refer to the machine data plate for specific
electrical and water requirements. The material provided on
this page is for reference only and may be subject to change
without notice.
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1: SPECIFICATION INFORMATION
DIMENSIONS
25 1/4
(642 mm)
A - Incoming Water Connection
B - Drain Connection - 2" IPS
C - Electrical Connection Point
NOTE: All vertical dimensions are
at lowest point due to adjustable
bullet feet and may be raised an
additional 2 3/4".
24 1/2
(622 mm)
36 3/4
(933 mm)
11 1/2
(292 mm)
DISH
CLEARANCE
C
C
20
(508 mm)
39
(991 mm)
A
21 1/4
(540 mm)
12 1/4
(311 mm)
A
7 3/4
(197 mm)
17
(432 mm)
3 (76 mm)
6 (152 mm)
B
B
6 3/4 (171 mm)
21 1/4
(540 mm)
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: INSTALLATION/OPERATION
INSTRUCTIONS
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
VISUAL INSPECTION: Before installing the unit, check the container and the machine for any damage. A damaged container
could be an indication of damage to the unit. If there is damage to both the container and the unit, DO NOT throw away the
container. The dishmachine has been inspected and packed at the factory with the expectation that it will arrive to you in new,
undamaged condition. However, rough handling by carriers or others may damage the unit while in transit. If this situation does
occur, do not return the unit to Ecolab; instead contact the carrier and ask them to inspect the damage to the unit and to com-
plete an inspection report. You must contact the carrier within 48 hours of receiving the machine. Also, contact your Ecolab rep-
resentative.
UNPACKING THE DISHMACHINE: Remove the machine from the container and inspect for any missing parts. If an item
appears to be missing, contact your Ecolab representative immediately to report it.
LEVEL THE DISHMACHINE: The dishmachine(s) covered in this manual are designed to operate on
a level surface. Ensure that the machine is level from side to side and from front to back; adjust the
unit’s bullet feet as required. Failure to level the dishmachine may cause decreased washing perfor-
mance.
Lower
Raise
Frame with Adjustable Foot
PLUMBING THE DISHMACHINE: All plumbing connections must comply with all applicable local, state and national plumbing
codes. The plumber is responsible for flushing the incoming water line prior to connecting it to remove all foreign debris that
may get trapped in the valves or cause an obstruction. Any valves that are fouled by matter left in the water line and the expens-
es resulting are not the responsibility of the manufacturer.
CONNECTING THE DRAIN LINE: The Omega 5 drain requires a minimum 2” NPT piping that is pitched
at least 1/4” per foot. There must also be an air gap between the machine drain line and the floor sink
or drain. If a grease trap is required by code, it should have a flow capacity of 5 gallons per minute.
WATER SUPPLY CONNECTION: Install the water supply line (1/2” NPT minimum) to the dishmachine
line y-strainer using copper pipe. It is recommended that a water shut-off valve be installed between the
main supply and the machine to allow for service. The water supply line must be capable of 20 5 PSI
Drain Connection
“flow” pressure at the recommended temperature as indicated on the data plate.
In areas where the water pressure fluctuates or is greater than the recommended pressure, it is sug-
gested that a water pressure regulator be installed. The Omega 5 does not come with a water pressure
regulator as standard equipment.
It is also recommended that a shock absorber (not supplied with the Omega 5) be installed in the incom-
ing water line. This prevents line hammer (hydraulic shock), induced by the solenoid valve, which can
cause damage to the equipment.
Y-Strainer
PLUMBING CHECK: Slowly turn on the water supply to the machine after connecting the incoming fill line and drain line. Check
for leaks and repair as required. Leaks must be repaired prior to placing the machine in operation.
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS
ELECTRICAL INSTALLATION INSTRUCTIONS
ELECTRICAL POWER CONNECTION: Electrical and grounding connections must comply with all applicable portions of the
National Electric Code (ANSI/NFPA 70) and/or other electrical codes that may apply.
Disconnect the electrical power supply and lockout the disconnect switch to indicate that you are working on the circuit.
The dishmachine data plate is located on the left front corner of the machine. Refer to this data plate for information concern-
ing the unit’s specific electrical requirements.
To install the incoming power lines, open the connection box by removing the con-
nection box lid. Install 1/2” conduit into the pre-punched holes in the back of the con-
nection box. Route the power wires and connect to the power block and grounding
lug. Install the service wires (L1 and N) to the appropriate terminals as they are
marked on the terminal block. Install the grounding wire into the lug provided. Wires
should be firmly secured in place.
It is recommended that “De-Ox” or another similar anti-oxidation agent be used on
all voltage connections.
VOLTAGE CHECK: Ensure that the machine is off and apply power to the machine.
Check the incoming power at the terminal block and ensure it corresponds to the
voltage on the machine data plate. Do not run the dishmachine if the voltage is too
high or too low. Shut off the service breaker and mark it as being for the dishma-
Power Block
chine. Advise all personnel of the location of the service breaker. Replace all covers
and tighten the screws.
Ground Lug
NOTE: Always refer to the machine data plate for specific electrical and water requirements. The material provided on
this page is for reference only and may be subject to change without notice.
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS
OPERATION INSTRUCTIONS
OPERATIONAL START-UP AND CHECK: Before proceeding with the start-up, verify the following:
1. Open the door and verify that the sump strainer is correctly installed in the sump.
2. Verify that the drain stopper is in position.
3. Check that the plugs are securely screwed into the ends of the wash arm.
4. Check that the wash arm is securely screwed into the stationary base and that it rotates freely.
5. Check the levels in all chemical containers and replace if necessary.
INSTALLATION/INITIAL START-UP PROCEDURE:
1. Turn on dishmachine
a) Turn on the incoming power to the machine at the circuit disconnect box.
b) Turn on the dishmachine by pressing the ON/OFF button. The red light will come on.
c) Check voltage at incoming terminals L1& L2. The voltage measured at these points should match data plate voltage.
d) If voltages are in required range, close the control box cover.
2. Fill Rinse Booster Heater with Water
a) Before the heater element can be energized, the rinse booster heater must be initially filled with water. Damage to the heater
element will occur if the element is not submerged in water. To initially fill the booster heater with water:
i) Press and hold the FILL button to turn on the incoming water solenoid valve. Continue holding the button until you hear water
entering the wash chamber through the airgap, then release the button. The rinse booster heater is now filled with water.
ii) Turn off the unit by pressing the on/off switch.
3. Enable Heater Element
a) For the initial start-up only, the heater element must be enabled. The machine is shipped from the factory with the heater ele-
ment disabled. This is done to ensure that the heater element is not damaged by energizing the element without the element being
submerged in water. To enable the heater element:
i) Remove the booster heater cover panel.
ii) Connect the tagged white/blue wires.
iii) Replace heater cover.
iv) Press the on/off switch, heaters will energize to maintain booster heater temperature.
Note: Water must be in the sump while the machine is running to avoid running the pump dry and causing damage to the pump
seal.
4. Adjust dishmachine fill level.
If the water level is not between the linses on the drain standpipe, it will require adjustment. Check to ensure that the recommended
water pressure is being supplied to the machine (20 ±5 PSI is required). If the water pressure is correct then the electronic timer will
need adjustment. Use the following steps to adjust the fill time.
A. Open control box cover.
B. Adjust fill time as per instructions on [aseio of this section.
C.Open and close the door to run a cycle, then check the water level. Adjust as necessary then close the control box cover.
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS
OPERATION INSTRUCTIONS (CONTINUED)
NOTE: The machine must run a complete cycle to drain and fill. If the machine is not allowed to drain, the water will build up inside
the tub. After the initial fill, the rinse water for the current cycle will become the wash water for the next cycle.
The dishmachine is now ready to proceed with the washing of dishes.
WARNING: Certain materials, including silver, silver plate, aluminum and pewter, are attacked by sodium hypochlorite sanitizers
(bleach).
PREPARING DISHES: Preparation of the ware will help ensure good results and less re-washes. If not done properly the dishes will
not be clean and will reduce the efficiency of the dishmachine.
The following steps should be followed to ensure good results:
A. Remove all scraps and gross soil into a garbage can.
B. Separate and pre-soak silverware.
C. Separate and pre-soak the egg and casserole dishes.
D. Scrape all ware with a brush or spatula.
E. Flush cups, bowls and glasses with running water.
F. Prewash dishware by soaking or spraying with a pre-rinse hose.
G. Place dishes and cups in dish rack. Cups should be upside down (so they don’t hold water).
H. Place glasses and flatware in their respective racks. Scatter flatware loosely in rack. Glasses should be placed upside down in a
properly sized rack. For optimal results, flatware should be washed twice, the first being horizontal, the second in a special rack to
hold flatware vertical.
DAILY MACHINE PREPARATION: Before proceeding with start-up, verify the following:
A. Open door and verify that the sump strainer is in place in the sump.
B. Verify that the drain stopper is in position.
C. Check that the plugs are securely screwed into the ends of all wash arms.
D. Check that the wash arms are securely screwed into the stationary bases and rotate freely.
E. Check levels in all chemical containers and replace if empty.
F. For initial fill, close doors then depress the “FILL” switch to the “FILL” position.
WASHING A RACK OF WARE:
A. Open doors, place a full rack into the machine, and close doors. Push the start switch and hold until unit starts (about 2 seconds).
B. After cycle is completed open doors and remove rack.
C. Repeat steps A and B.
SHUT DOWN AND CLEANING:
A. At the end of mealtime, move the “ON/OFF” switch to the “OFF” position.
B. Open doors and manually remove drain stopper to drain the unit.
C. Remove and clean upper and lower wash arms.
D. Remove and clean the sump strainer.
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS
CHEMICAL DISPENSING EQUIPMENT
WARNING: CHLORINE-BASED SANITIZERS CAN BE DETRIMENTAL TO YOUR MACHINE IF THE CHEMICAL
SOLUTION IS TOO STRONG. SEE YOUR CHEMICAL PROFESSIONAL TO ENSURE YOUR DISPENSER IS SET
UP CORRECTLY.
This equipment is not recommend for use with deionized water or other aggressive fluids. Use of deionized water or
other aggressive fluids will result in corrosion and failure of materials and components. Use of deionized water or
other aggressive fluids will void the manufacturer's warranty.
TO PREPARE CHEMICAL FEEDER PUMPS FOR OPERATION
The Delta 5 dismachines are supplied with detergent, rinse additive and sanitizer dispensing chemical feeder pumps. Locate
the open ends of the chemical tubes with the tube stiffeners and place each one in the appropriate container.
A. Red Tubing = Detergent
B. Blue Tubing = Rinse Aid
C. White Tubing = Sanitizer
PRIMING CHEMICAL FEEDER PUMPS
Chemical feeder pumps need priming when the machine is first installed or if for some reason the chemical lines have been
removed and air is allowed to enter.
CAUTION: Water must be in the sump and wash tank prior to the dispensing of chemicals. Sanitizer in con
centration is caustic and may cause damage without dilution.
1. Verify that the proper chemical tube stiffener inlet is in the proper container.
2. Use the prime switches located on the control panel at the bottom of the unit to prime each pump. The switches are clear-
ly marked as to what chemical feeder pump they are assigned to.
3. To prime the pumps, hold the switch in the momentary position until chemical can be observed entering the sump.
4. Detergent is dispensed as required during the wash cycle by the universal timer. The amount of detergent may need to be
increased or decreased depending on water quality and type of detergent.
5. Rinse additive is dispensed as required into the final rinse. The amount of rinse aid may need to be adjusted depending on
water hardness and results.
6. Sanitizer (either chlorine or iodine) is dispensed into the final rinse. The amount of sanitizer may need to be adjusted
depending on the concentration and type of sanitizer used.
7. Please refer to the next page for instruction on adjusting the chemical feeder pumps on the universal timer.
WARNING: Some of the chemicals used in dishwashing may cause chemical burns if they come in contact
with your skin. Wear protective gear when handling these chemicals. If you do come in contact with these
chemicals, immediately flush the affected area with fresh water.
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS
PROGRAMMING INSTRUCTIONS FOR CHEMICAL FEEDER PUMPS (FOR INSTALLATION TECHNICIAN ONLY)
To access the programming mode, the machine must be ON, and idle (between cycles).
On the timer board, press and hold both the MOVE and ENTER buttons on the timer board simultaneously for two seconds.
The PROGRAM light will illumniate.
Once in the programming mode, the MOVE button is used to scroll between the programming categories and the ENTER but-
ton is used to select the category.
Press the MOVE button to move the blinking light between FILL, RINSE AID, DETERGENT or SANITIZER.
Press the ENTER button for the chosen category.
The PROGRAM light will illuminate.
To change the value of a parameter, use the MOVE button to illuminate the light next to the time option (time is in seconds). In
the time categories, each second in use will light up. To deselect the option, press ENTER and the light will go off, press ENTER
again and it will illuminate. Once you have set your time category, press the MOVE button to the ACCEPT option and press
ENTER. This will save the changed parameters.
Once you press the ENTER button when the ACCEPT option is illuminated, you will exit the programming mode. To change
any other values, you will have to return to the programming mode. To revert back to a previous setting, you must return to that
option and change the parameter back to the previous setting.
Once in the programming mode, if there have been no keypad inputs for approximately 2 minutes, the system will automati-
cally exit out of the programming mode. Any changes to parameters will be saved when the programming mode is automati-
cally exited.
The wash and drain settings are not adjustable.
All time adjustments are in seconds. Refer to the chart below for the adjustable outputs.
Timer Programming Board
Time in Seconds
Rinse Aid
Fill
Sanitizer
Detergent
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS
DETERGENT CONTROL
Detergent usage and water hardness are two factors that contribute greatly to how efficiently your dishmachine will operate. Using deter-
gent in the proper amount can become, in time, a source of substantial savings. A qualified water treatment specialist can tell you what
is needed for maximum efficiency from your detergent, but you should still know some basics so you’ll understand what they are talking
about.
First, you must understand that hard water greatly effects the performance of the dishmachine. Water hardness is the amount of dis-
solved calcium and magnesium in the water supply. The more dissolved solids in the water, the greater the water hardness. Hard water
works against detergent, thereby causing the amount of detergent required for washing to increase. As you use more detergent, your
costs for operating the dishmachine will increase and the results will decrease. The solids in hard water also may build-up as a scale on
wash and rinse heaters, decreasing their ability to heat water. Water temperature is important in removing soil and sanitizing dishes. If
the water cannot get hot enough, your results may not be satisfactory. This is why Jackson recommends that if you have installed the
machine in an area with hard water, that you also install some type of water treatment equipment to help remove the dissolved solids
from the water before it gets to the dishmachine.
Second, hard water may have you adding drying agents to your operating cycle to prevent spotting, when the real problem is deposit-
ed solids on your ware. As the water evaporates off of the ware, the solids will be left behind to form the spotting and no amount of dry-
ing agent will prevent this. Again, using treated water will undoubtedly reduce the occurrences of this problem.
Third, treated water may not be suitable for use in other areas of your operation. For instance, coffee made with soft water may have
an acid or bitter flavor. It may only be feasible to install a small treatment unit for the water going into the dishmachine itself. Discuss
this option with your qualified water treatment specialist.
Even after the water hardness problems have been solved, there still must be proper training of dishmachine operators in how much
detergent is to be used per cycle. Talk with your water treatment specialist and detergent vendor and come up with a complete training
program for operators. Using too much detergent has as detrimental effects as using too little. The proper amount of detergent must be
used for job. It is important to remember that certain menu items may require extra detergent by their nature and personnel need to be
made aware of this. Experience in using the dishmachine under a variety of conditions, along with good training in the operation of the
machine, can go a long way in ensuring your dishmachine operates as efficiently as possible.
Certain dishmachine models require that chemicals be provided for proper operation and sanitization. Some models even require the
installation of third-party chemical feeders to introduce those chemicals to the machine. Jackson does not recommend or endorse any
brand name of chemicals or chemical dispensing equipment. Contact your local chemical distributor for questions concerning these sub-
jects.
Some dishmachines come equipped with integral solid detergent dispensers. These dispensers are designed to accommodate deter-
gents in a certain sized container. If you have such a unit, remember to explain this to your chemical distributor upon first contacting
them.
As explained before, water temperature is an important factor in ensuring that your dishmachine functions properly. The data plate locat-
ed on each unit details what the minimum temperatures must be for either the incoming water supply, the wash tank and the rinse tank,
depending on what model of dishmachine you have installed. These temperatures may also be followed by temperatures that Jackson
recommends to ensure the highest performance from you dishmachine. However, if the minimum requirements are not met, the chances
are your dishes will not be clean or sanitized. Remember, a dish can look clean, but it may not be sanitized. Instruct your dishmachine
operators to observe the required temperatures and to report when they fall below the minimum allowed. A loss of temperature can indi-
cate a much larger problem such as a failed heater or it could also indicate that the hot water heater for your operation is not up to capac-
ity and a larger one may need to be installed.
There are several factors to consider when installing your dishmachine to ensure that you get the best possible results from it and that
it operates at peak efficiency for many years. Discuss your concerns with your local chemical distributor and water treatment specialist
before there is a problem.
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3:
PREVENTATIVE MAINTENANCE
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3: PREVENTATIVE MAINTENANCE
PREVENTATIVE MAINTENANCE
The dishmachines covered in this manual are designed to operate with a minimum of interaction with the operator. However,
this does not mean that some items will not wear out in time. Jackson highly recommends that any maintenance and repairs
not specifically discussed in this manual should be performed by QUALIFIED SERVICE PERSONNEL ONLY. Performing main-
tenance on your dishmachine may void your warranty if it is still in effect.
There are many things that operators can do to prevent catastrophic damage to the dishmachine. One of the major causes of
component failure has to do with prescrapping procedures. A dishmachine is not a garbage disposal; any large pieces of mate-
rial that are put into the machine shall remain in the machine until they are either broken up (after spreading out on your ware!)
or physically removed. Strainers are installed to help catch debris, but they do no good if they are clogged. Have operators reg-
ularly inspect the pan strainers to ensure (1) that they are free of soil and debris and (2) they are laying flat in the tub.
When cleaning out strainers, do NOT beat them on waste cans. The strainers are made of metal and can be forgiving; but once
severe damage is done, it is next to impossible for the strainer to work in the way it was designed to. Wipe out strainers with
a rag and rinse under a faucet if necessary. For stubborn debris, a toothpick should be able to dislodge any obstructions from
the perforations. Always ensure that strainers are placed back in the machine before operation and that they lay flat in the tub.
You may wish to also refer to the page entitled “Detergent Control” in order to learn more about how your water hardness will
effect the performance of your machine. Hard water makes dishmachines work harder and decreases efficiency.
Again, it is important to remind operators that trying to perform corrective maintenance on the dishmachine could lead to larg-
er problems or even cause harm to the operator. If a problem is discovered; secure the dishmachine using proper shut down
procedures as listed in this manual and contact a QUALIFIED SERVICE AGENCY.
Some problems, however, may having nothing to do with the machine itself and no amount of preventative maintenence is
going to help. A common problem has to do with temperatures being too low. Verify that the water temperatures coming to your
dishmachine match the requirements listed on the machine data plate. There can be a variety of reasons why your water tem-
perature could be too low and you should discuss it with a QUALIFIED SERVICE AGENCY to determine what can be done.
By following the operating and cleaning instructions in this manual, you should get the most efficient results from your machine.
As a reminder, here are some steps to take to ensure that you are using the dishmachine the way it was designed to work:
1. Ensure that the water temperatures match those listed on the machine data plate.
2. Ensure that all strainers are in place before operating the machine.
3. Ensure that all wash and/or rinse arms are secure in the machine before operating.
4. Ensure that drains are closed/sealed before operating.
5. Remove as much soil from dishes by hand as possible before loading into racks.
6. Do not overfill racks.
7. Ensure that glasses are placed upside down in the rack.
8. Ensure that all chemicals being injected to machine have been verified as being at the correct concentrations.
9. Clean out the machine at the end of every workday as per the instructions in the manual.
10. Always contact a QUALIFIED SERVICE AGENCY whenever a serious problem arises.
11. Follow all safety procedures, whether listed in this manual or put forth by local, state or national codes/regulations.
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4:
TROUBLESHOOTING
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4: TROUBLESHOOTING SECTION
COMMON PROBLEMS
WARNING: Inspection, testing and repair of electrical equipment should be performed only by qualified service per
sonnel. Certain procedures in this section require electrical tests or measurements while power is applied to the
machine. Exercise extreme caution at all times. If test points are not easily accessible, disconnect power, attach test
equipment and reapply power to test. When replacing electrical parts, disconnect power at source circuit breaker.
Problem: Water overflow from bottom of door.
1. Clogged drain. Remove obstruction.
2. Machine not level. Level machine, or increase height to the front.
3. Excessive inlet pressure. Install pressure reducing valve, or adjust if one is present. Ensure flow is 20 5 PSI.
4. Detergent foaming. Reduce detergent quantity.
5. Excessive fill time. Adjust timer fill time as per Section 2.
Problem: Wash motor doesn’t operate on manual wash.
1. Loose or broken wires. Reconnect or replace wires in motor.
2. Defective manual wash switch. Replace.
3. Defective motor starting relay. Replace.
Problem: Motor operates on manual wash/delime but not on automatic.
1. Defective circuit in manual wash switch. Replace switch.
Problem: No water comes through the rinse arms when the “FILL” switch is depressed.
1. Water not turned on. Turn water on.
2. Defective solenoid valve. Replace solenoid valve.
Problem: Little or no water coming through the rinse assemblies.
1. Limed up rinse heads or piping. Delime rinse heads.
2. Low water pressure. Increase pipe size to machine. Adjust pressure regulator.
Problem: Rinse water runs continuously with breaker turned off.
1. Defective plunger in solenoid valve. Replace.
2. Defective diaphragm in solenoid valve. Replace diaphragm.
Problem: Wash temperature not at required reading on thermometer.
1. Check that white/blue wires are connected. See note on page 12.
2. Defective thermometer. Replace.
3. Defective thermostat. Adjust thermostat. Replace thermostat.
4. Rinse heater defective. Replace heater element.
5. Defective heater contactor R2. Replace.
6. Incoming inlet water temperature below required minmum.
7. Defective heater delay relay (R4). Replace
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTON 4: TROUBLESHOOTING SECTION
COMMON PROBLEMS
WARNING: Inspection, testing and repair of electrical equipment should be performed only by qualified service personnel.
Certain procedures in this section require electrical tests or measurements while power is applied to the machine. Exercise
extreme caution at all times. If test points are not easily accessible, disconnect power, attach test equipment and reapply
power to test. When replacing electrical parts, disconnect power at source circuit breaker.
Problem: Rinse water not at required temperature range.
1. Check that white/blue wires are connected. See note in installation instructions.
2. Thermometer is defective. Replace.
3. Thermostat is defective. Adjust the thermostat. Replace if necessary.
4. Incoming rinse water does not meet minimum criteria indicated on machine data plate. Adjust as required.
Problem: No indication of pressure.
1. Water turned off. Turn water on.
2. Pressure gauge defective. Replace pressure gauge.
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5:
PARTS SECTION
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
CHEMICAL FEEDER PUMP ASSEMBLY
Squeeze Tube Lubricant
Housing Kit (Red roller)
Mfg. No.: 04320-121-37-10
Motor, 36 RPM 115V
Detergent/Sanitizer Feeder Pump
Mfg. No.: 04320-111-35-14
Motor, 14 RPM 115V
Rinse Aid Feeder Pump
Mfg. No.: 04320-111-35-13
Motor, 36 RPM 240V
Detergent/Sanitizer Feeder Pump
Mfg. No.: 04320-111-47-47
Squeeze Tube, Detergent/Sanitizer
(Use with the red roller.)
Roller, Red (Detergent/Sanitizer)
Mfg. No.: 04320-111-36-70
Motor, 14 RPM 240V
Rinse Aid Feeder Pump
Mfg. No.: 04320-111-47-46
Mfg. No.: 05700-111-35-29
Roller, White (Rinse Aid)
Mfg. No.: 04320-002-82-28
Clear Squeeze Tube, Rinse Aid
(Use with the white roller.)
Mfg. No.: 05700-011-76-41
Motor, 14 RPM 24V
Rinse Aid Feeder Pump
Mfg. No.: 04320-011-63-33
Roller, Black
Mfg. No.: 04320-111-65-27
Tube, Small 7/32”
(Use with the black roller.)
Mfg. No.: 05700-011-65-21
1/4” Sight Tube
3/8” Sight Tube
Ecolab No.: 92001017
Ecolab No.: 96569496
Mfg. No.: N/A
Mfg. No.: 05700-111-35-33
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
SOLENOID VALVE REPAIR PARTS KITS
Screw
Data Plate
Cap Screw
Coil and Housing
Data Plate
Valve Bonnet
Cap
Spring & Plunger Kit
06401-003-07-40
Spring position is moved
for clarity. Goes below
the plunger.
Cap Retainer
O-Ring & Diaphragm
06401-003-07-41
Diaphragm
Retainer
O-Ring
Plunger
Screen Retainer
Valve Body
Components of Repair
Kit 06401-003-06-23
Body
Mesh Screen
Complete Vacuum Breaker Assembly, 1/2” NPT
04820-003-06-13
Water Hammer Arrestor Assembly
05700-002-64-67
Complete 110 Volt Solenoid Valve Assembly, 1/2”
04810-100-12-18
Water Hammer
Arrestor, 1/2" NPT
06685-100-05-00
Coil & Housing only, 1/2”
06401-003-07-43
Complete 220 Volt Solenoid Valve Assembly, 1/2”
04810-100-09-18
Coil & Housing only, 1/2”
06401-003-07-44
Close Nipple, 1/2”
04730-207-15-00
Tee, 1/2” x 1/2” x 1/2”
04730-211-27-00
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
CONTROL BOX ASSEMBLY
1
9, 10
5
2
3
6
Normal/Delime
7
Rinse Aid/Detergent
8
4
Sanitizer
11, 27
11, 27
14
15
12, 13, 28
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
CONTROL BOX ASSEMBLY
16, 27
32
29
19
17, 28
18, 27
30
31
17, 28
20
21
24, 27
25, 26, 27
27
22, 23
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
CONTROL BOX ASSEMBLY (CONTINUED)
ITEM QTY
DESCRIPTION
Mfg. No.
1
2
3
4
5
6
7
8
1
1
1
4
1
1
1
1
1
1
2
1
1
4
1
5
2
1
1
1
1
1
2
1
1
1
18
4
1
1
1
1
Control Box Weldment
Control Box Cover
05700-003-38-84
05700-003-30-54
09905-100-75-93
05305-011-39-36
09905-003-32-56
05930-301-21-18
05930-011-35-27
05930-111-38-21
05310-374-01-00
05311-174-01-00
05945-109-05-69
05945-003-33-09
05700- 003-02-08
05975-011-49-03
05975-011-65-51
04730-011-39-01
05945-111-35-19
05940-021-94-85
05700-003-35-37
05975-003-33-28
05700-003-35-48
05990-111-35-38
05305-002-32-38
05940-002-78-97
05940-001-97-91
09905-003-09-30
05310-373-01-00
05310-373-03-00
05700-003-35-34
05700-003-35-36
05700-003-35-35
05700-003-35-49
Decal, Warning - Disconnect Power
Screw, 10-32 x 1/2’’ Long, Phillips Tusshead
Decal, Peri-pump Prime
Switch, Delime/Normal
Detergent/Rinse Aid Pump Prime Switch
Sanitizer Pump Prime Switch
Locknut, 1/4”-20 S/S Hex with Nylon Insert
Washer, 1/4”-20 S/S
Contactor
Timer, Universal
Bracket, Timer
Fitting, Conduit, Heyco 1/2’’
Fitting, 1/2’’ Straight Snap In
Clamp, 5/8” Nylon
Relay, 2 Pole
Terminal Board
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Harness, Switch Panel
Fitting, 1/2’’ 90 Deg. Snap In
Conduit, 1/2” x 40”
Cycle Counter, 115V
Screw, 4-40 x 1/4” Phillips Pan Head
Terminal Board
Terminal Board
Decal, Terminal Board 8 Position
Locknut, 10-24 S/S Hex with Nylon Insert
Locknut, 6-32 S/S Hex with Nylon Insert
Harness, Wash Pump
Harness, Drain Solenoid
Harness, Peri-pump
Conduit, 1/2” x 14”
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
PERI-PUMP BOX ASSEMBLY
7
6
9
1
15
5
4
1
8
2
10
3
16
12
18
14
17
13
ITEM QTY
DESCRIPTION
Mfg. No.
1
2
3
4
5
6
7
8
2
1
1
1
1
1
1
1
5
3
3
1
1
1
1
1
1
1
Peri-pump Assembly, 36 RPM
Peri-pump Assembly, 14 RPM
Drip Channel
Weldment, Peri-pump Box
Weldment, Peri-pump Box Cover
Fitting, Conduit, Heyco 1/2’’
Clamp, 5/8” Nylon (Located inside of box)
Clamp, 1” Nylon
Screw, 10-32 x 1/2’’ Long, Phillips Tusshead
Locknut, 10-24 S/S Hex with Nylon Insert
Tube Stiffener (Not Shown)
Tubing, 1/4’’ OD x 60” Long, Blue
Tubing, 1/4’’ OD x 60” Long, White
Tubing, 1/4’’ OD x 60” Long, Red
Terminal Board (Not Shown)
Tubing,1/4 OD x 120 Long Blue
Tubing,1/4 OD x 120 Long Write
Tubing,1/4 OD x 120 Long Red
05700-002-96-08
05700-002-96-09
05700-003-32-89
05700-003-32-00
05700-003-33-80
05975-011-65-51
04730-011-39-01
04730-002-41-88
05305-011-39-36
05310-373-01-00
05700-002-66-49
05700-002-52-34
05700-002-52-33
05700-011-63-18
05940-001-97-91
05700-011-37-17
05700-011-37-13
05700-011-37-15
9
10
11
12
13
14
15
16
17
18
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
ELECTRICAL CONNECTION BOX ASSEMBLY
1
5
2
3
7
10
A
A
6
5
4
8
11
A
9
ITEM QTY
DESCRIPTION
Box, Power Junction Weldment
Terminal Block Spacer
Terminal Block
Locknut, 6-32 with Nylon Insert
Locknut, 10-24 with Nylon Insert
Lug, Ground
Decal, Power Connection
Decal, Warning to Disconnect Power
Screw, 10-32 x 1/2’’ Long, Phillips Trusshead
Decal, Copper Conductors Only
Cover, Solenoid Box
ECOLAB No.
96633058
96025127
96025119
88460050
88429063
83118000
96028402
96039821
N/A
Mfg. No.
1
1
1
1
1
5
1
1
1
1
2
1
05700-003-30-58
05700-011-40-05
05940-500-09-61
05310-373-03-00
05310-373-01-00
05940-200-76-00
09905-011-47-64
09905-100-75-93
05305-011-39-36
09905-011-47-35
05700-003-46-72
2
3
4
5
6
7
8
9
10
11
96021365
96634672
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
FRAME ASSEMBLY
5
ITEM QTY
DESCRIPTION
Mfg. No.
1
2
3
4
5
6
7
8
1
1
4
1
1
1
1
8
1
4
5
1
1
1
Frame Weldment
Frame Weldment Double Door
Foot, 3” Adjustable
Plate, Hinge Weldment
Washer, Hinge Weldment
Spacer, PB Bolt
05700-003-09-40
05700-003-28-12
05340-002-14-55
05700-003-10-11
05700-002-54-62
05700-000-29-40
05700-000-35-05
05311-174-01-00
05700-003-09-31
05310-374-01-00
05310-274-01-00
05700-002-51-93
05700-003-14-53
05305-274-02-00
Clamp, Pipe
Washer, 1/4”-20 S/S
9
Keeper, Door Panel Latch
Locknut, 1/4”-20 S/S Hex with Nylon Insert
Nut, Hex 1/4”-20
Booster Mounting Plate Weldment
Bracket, Temperature Gauge
Bolt, 1/4”-20 x 1/2” Long
10
11
12
13
14
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
HOOD ASSEMBLY
ITEM QTY
DESCRIPTION
Mfg. No.
1
1a
2
3
4
5
6
7
8
1
1
Hood Weldment
Hood Weldment Double Door
Switch, 115V Reed
Bracket, Limit Switch
Locknut, 10-24 with Nylon Insert
Clamp, Pipe 5/8”
Rack Rail Weldment
Washer, 1/4”-20 I.D.
Gasket, Side Panel (5.3 Feet)
05700-003-09-56
05700-003-28-17
05930-002-36-80
05700-021-71-18
05310-373-01-00
05700-000-35-06
05700-002-45-67
05311-174-01-00
05700-003-35-51
1
1
4
2
2
2
1
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
SWITCH PANEL ASSEMBLY
ITEM QTY
DESCRIPTION
Mfg. No.
Complete Side Panel Assembly
Complete Side Fanel Assembly (Double Door)
Side Panel Weldment
05700-003-24-38
05700-003-24-40
05700-003-24-36
05700-003-24-37
05700-003-14-91
05700-003-14-92
05945-504-06-18
05945-504-07-18
09905-003-08-63
05975-011-65-51
04730-011-60-21
05310-373-01-00
05311-173-02-00
09905-003-38-95
05975-011-49-03
05930-002-36-80
05700-021-71-18
05940-001-97-91
1
1a
2
3
4
5
6
7
8
1
1
2
1
1
1
1
1
3
6
6
Side Panel Weldment (Double Door)
(3) Switch, Prime Assembly
Switch, On/Off Assembly
(2) Light, Amber
(2) Light, Red
Decal, Switch Panel
Fitting, .25-.546
(2) Plug, 3/4” hole
9
Locknut, 10-24 with Nylon Insert
Washer, #10
10
11
12
13
14
15
1
Decal Switch Panel (Double Door Only)
Fitting (Double Door Only)
switch (Double Door Only)
bracket (Double Door Only)
Terminal Board
1
1
1
1
ALL NUMBERS THAT ARE IN PARENTHISES ARE FOR THE DOUBLE DOOR
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
TUB ASSEMBLY
14b
14c
14a
27b
27a
16a
16b
30e
30d
30c
30b
30a
17c
17b
17a
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
TUB ASSEMBLY CONTINUED
ITEM QTY
DESCRIPTION
Mfg. No.
1
1a
2
3
4
5
6
7
8
1
1
1
2
1
1
1
23
1
1
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
18
3
1
1
1
1
1
1
3
6
1
1
1
4
1
2
1
1
1
4
1
1
Tub Weldment
05700-003-09-51
05700-003-28-15
05700-002-45-51
05700-111-35-03
05700-021-34-38
05700-111-34-52
05700-031-37-86
05310-374-01-00
05330-111-35-15
09515-011-46-61
05305-276-10-00
05311-011-35-36
05311-276-01-00
05310-276-01-00
05700-003-31-60
05700-003-31-61
05700-003-31-59
05330-002-60-69
05700-021-35-97
05700-002-60-50
05700-021-33-29
05700-121-35-54
05700-002-45-52
05700-002-40-83
05310-275-01-00
05700-002-38-10
05315-011-60-09
05700-002-45-61
05311-174-01-00
05325-002-42-65
05700-002-45-62
05700-002-45-63
03110-002-45-09
05700-002-52-95
05700-002-52-94
03110-002-45-09
05305-274-02-00
05305-274-24-00
05700-003-23-48
05700-003-23-49
05700-003-16-65
04730-002-55-61
05330-003-24-17
04730-002-41-88
05700-003-09-61
05700-003-35-88
04810-200-11-00
05310-373-01-00
09905-100-75-93
05700-003-30-25
Tub Weldment (Double Door)
Lower Manifold Weldment
Manifold Gasket
Drain Seat Insert
Spillway Gasket
Spillway Weldment
Locknut, 1/4”-20 S/S Hex with Nylon Insert
Manifold O-Ring
Modified Casting Wedge
Bolt, 3/8”-16 x 1 1/4” S/S
Washer, 3/8” Bevel-Square Iron
Lockwasher, 3/8”
9
10
11
12
13
14
14a
Nut, 3/8”-16 S/S Hex
Complete Wash Arm Assembly
Wash Arm Weldment w/ End Plugs
Wash Arm End Plugs
Wash Arm O-ring
Wash Arm Bearing Assembly
Sump Strainer
Stand Pipe Weldment
Stopper, Stand Pipe
Drain Link Assembly
Drain Link
14b
14c
15
16a
16b
17
17a
17b
17c
18
19
20
21
22
22a
22b
23
23a
23b
24
25
26
27
27a
27b
28
29
30
30a
30b
30c
30d
30e
Nut, Hex, 5/16”-18
Drain Link Connector
Hair Pin, 1/8” to 1”
Fill Tube Weldment
Washer, 1/4”-20 I.D.
Chemical Tube Grommet
(2) Pivot Plate, Left Door Complete Assembly
Door Pivot Plate Left Weldment
Door Pivot Plate Bearing
(2) Pivot Plate, Right Door Complete Assembly
Door Pivot Plate Right Weldment
Door Pivot Plate Bearing
Bolt, 1/4”-20 x 1/2” Long
Screw, 1/4”-20 x 5/8” Long
Air Gap Weldment
Halo Assembly
Halo Weldment
Spray Nozzle and Receptacle
Gasket, Air Gap
Clamp, 1” Nylon (Not Shown, located on bottom of tub.)
Drain Solenoid Box Assembly
Solenoid Box Weldment
Drain Solenoid, 115V
Locknut, 10-24 with Nylon Insert
Decal, Warning
Solenoid Box Cover
ALL NUMBERS THAT ARE IN PARENTHISES ARE FOR THE DOUBLE DOOR
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
FRAME AND MOTOR ASSEMBLY
10
1
11
See Motor
Assembly
Page
4
2
11
11
3a
3b
See Plumbing
Assembly
Page
6
See Booster
Assembly
Page
12
5
8
9
7
See Frame
Assembly
13
Page
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
FRAME AND MOTOR ASSEMBLY (CONTINUED)
ITEM QTY
DESCRIPTION
Mfg. No.
1
2
3
3a
3b
4
5
6
7
8
9
10
11
12
13
1
1
1
2
1
1
1
1
Discharge Tube Connector
Pump Suction Hose
05700-011-70-34
05700-002-40-82
05700-002-45-58
04730-011-93-99
05700-002-45-59
05700-002-84-69
05700-003-33-25
05700-002-51-95
05305-274-02-00
05310-374-01-00
05311-174-01-00
04730-719-06-09
04730-719-18-00
04730-207-15-00
06685-111-68-48
Discharge Hose Assembly
Fitting, 1/2” Pushlock, Female, Brass
Hose, 1/2” x 22 1/2” Long
Wash Restrictor
Accumulator Strainer Weldment
Accumulator Weldment
Bolt, 1/4”-20 x 1/2” Long
Locknut, 1/4”-20 S/S Hex with Nylon Insert
Washer, 1/4”-20 S/S
Hose Clamp, 13/16 TO 1 1/2”
Hose Clamp, 1 1/16” to 2 1/4”
Close Nipple, 1/2” Brass
Gauge, Thermometer
8
18
18
1
3
1
1
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
MOTOR & PUMP ASSEMBLY
Complete Pump & Motor Assembly
Mfg. No.: 06105-002-16-29
Pump Only Assembly
Mfg. No.: 05700-002-79-49
Motor Only
Mfg. No.: 06105-002-79-61
Impeller Assembly
Mfg. No.: 05700-002-81-86
Shim Kit
Mfg. No.: 05700-002-82-58
Pump Casing
Mfg. No.: 05700-002-84-99
Case O-Ring
Mfg. No.: 05330-002-81-83
Seal Plate
Mfg. No.: 05700-002-81-87
Mechanical Seal
Mfg. No.: 05330-002-34-22
Other parts not shown.
Drain Plug
Mfg. No.: 04730-002-81-89
Case Capscrew
Mfg. No.: 05305-002-81-88
Motor Mounting Bracket
Mfg. No.: 05700-002-55-52
Lockwasher, 3/8”
Mfg. No.: 05311-276-01-00
Nut, Hex 3/8”-16 S/S
Mfg. No.: 05310-276-01-00
Bolt, 3/8” x 3/4” Long Hex Head
Mfg. No.: 05306-011-71-60
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
32
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
BOOSTER TANK ASSEMBLY
13
3
12
10
11
ITEM QTY
DESCRIPTION
Mfg. No.
1
2
3
4
5
6
7
8
1
1
1
1
1
1
4
4
2
1
1
1
1
1
Booster Tank Weldment
Heater, 120V, 2000 Watts
Heater Gasket
Thermostat
Fitting, Imperial Brass
Plug, 1/4” Brass
05700-002-45-56
04540-002-45-13
05330-100-01-10
05930-003-13-65
05310-924-02-05
04730-209-01-00
05311-275-01-00
05310-275-01-00
05310-373-03-00
05700-002-39-07
09905-100-75-93
05305-173-12-00
05975-003-35-32
05975-003-35-33
Lockwasher, 5/16”
Nut, 5/16”-18 S/S Hex
Locknut, 6-32 S/S Hex w/ Nylon Insert
Booster Tank Cover
Decal, Warning, Disconnect Power
Screw, 10-32 x 3/8”
9
10
11
12
13
13a
Fitting, 1/2” NPT x 90 Deg. Elbow
Nut, 1/2” NPT Nylon
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
INCOMING PLUMBING ASSEMBLY
5
4
3
2
6
ITEM QTY
DESCRIPTION
Mfg. No.
1
2
3
4
5
6
1
1
1
1
1
1
Incoming Plumbing Assy.
Y-Strainer
Nipple, Close, 1/2’’ NPT, Brass
Valve, Solenoid, 1/2’’ NPT, 115V
Plumbing, incoming Union
Fitting, Liquidtiht
05700-003-38-08
04730-217-01-10
04730-207-15-00
04810-100-12-18
05700-003-39-37
05975-011-49-03
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
DOOR ASSEMBLY
ITEM QTY
DESCRIPTION
Mfg. No.
Complete Door Assembly
(2) Door Weldment
(2) Magnet, Reed Switch
(2) Locknut, 6-32 S/S Hex with Nylon Insert
(4) Locknut, 1/4”-20 S/S Hex with Nylon Insert
(2) Nut, Hex 1/4”-20 S/S
(2) Bolt, 1/4”-20 Eye, S/S
(2) Spring, Door
05700-003-35-30
05700-003-35-29
05930-002-68-53
05310-373-03-00
05310-374-01-00
05310-274-01-00
05306-002-55-59
05340-011-44-58
1
2
3
4
5
6
7
2
2
4
2
2
2
2
ALL NUMBERS THAT ARE IN PARENTHISES ARE FOR THE DOUBLE DOOR
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
35
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: PARTS SECTION
FRONT PANEL ASSEMBLY
Double Door Only
Panel Clips
2 per machine
05340-003-22-95
(Double Door Only)
Back Panel Weldment
1 per machine
05700-003-24-42
ITEM QTY
DESCRIPTION
Mfg. No.
Complete Panel Assembly
Panel Weldment
Handle
Back panel weldment
Panel clips
05700-003-09-53
05700-003-09-54
05340-001-96-30
05700-002-24-42
05700-033-22-95
1
2
3
4
1
1
1
2
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6:
ELECTRICAL SCHEMATICS
37
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: ELECTRICAL SCHEMATICS
DELTA 5 115V, 50/60 HERTZ, SINGLE PHASE
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
38
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 7:
JACKSON MAINTENANCE &
REPAIR CENTERS
39
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS
ALABAMA TO FLORIDA
ALABAMA
CALIFORNIA
P & D APPLIANCE
GCS SERVICE INC.
PHILADELPHIA, PA
(215)925-6217
800-441-9115
FAX: (215) 925-6208
4220-C ROSEVILLE ROAD
NORTH HIGHLANDS, CA 95660
(916) 974-2772
800-824-7219
FAX:(916) 974-2774
JONES-McLEOD APPLIANCE SVC BARKERS FOOD MACHINERY
1616 7TH AVE. NORTH
BIRMINGHAM, AL 35203
(205) 251-0159
SERVICES
5367 SECOND STREET
IRWINDALE, CA 91706
(626) 960-9390
800-821-1150
ELMER SCHULTZ SERVICE
FAX: (205) 322-1440
800-258-6999
FAX: (626) 337-4541
COMMERCIAL APPLIANCE SER- 36 BELMONT AVE.
VICE, INC.
WILLMINGTON, DE 19804
281 LATHROP WAY, #100
SACRAMENTO, CA 95815
(916) 567-0203
(302) 655-8900
800-225-0599
FAX: (302) 656-3673
JONES-McLEOD APPLIANCE SVC
854 LAKESIDE DRIVE
MOBILE, AL 36693
GCS SERVICE INC.
LOS ANGELES, CA
(213) 683-2090
(800) 464-2222
(251) 666-7278
(916) 567-0324 FAX
800-237-9859
FAX: (251) 661-0223
800-327-1433
FAX: (213) 683-2099
EMR SERVICE DIVISION
106 WILLIAMSPORT CIRCLE
SALISBURY, MD 21804
(410) 543-8197
COLORADO
ALASKA
GCS SERVICE INC.
SANTA ANA, CA
GCS SERVICE INC.
SHERIDAN, CO
(303) 371-9054
FAX: (410) 548-4038
RESTAURANT APPLIANCE SER- (714) 542-1798
VICE
800-540-0719
800-972-5314
FLORIDA
7219 ROOSEVELT WAY NE
SEATTLE, WA 98115
(206) 524-8200
800-433-9390
FAX: (206) 525-2890
FAX: (714) 542-4787
FAX: (303) 371-4754
COMMERCIAL APPLIANCE SER-
GCS SERVICE INC.
S. SAN FRANCISCO, CA
(650) 635-0720
800-969-4427
FAX: (650) 871-4019
HAWKINS COMMERCIAL APPLI- VICE
ANCE SERVICE
3000 S. WYANDOT ST.
ENGLEWOOD, CO 80110
(303) 781-5548
8416 LAUREL FAIR CIRCLE
BLDG 6, SUITE 114
TAMPA, FL 33610
(813) 663-0313
ARIZONA
(800) 624-2117
800-282-4718
COMMERCIAL APPLIANCE SER- FAX: (303) 761-5561
FAX: (813) 663-0212
net
AUTHORIZED COMMERCIAL
FOOD EQMT. SVC
4832 SOUTH 35TH STREET
PHOENIX, AZ 85040
(602) 234-2443
VICE, INC.
6507 PACIFIC AVENUE, SUITE
102
STOCKTON, CA 95207
(916) 567-0203
METRO APPLIANCE SERVICE
1640 S BROADWAY
DENVER, CO 80210
(303) 778-1126
GCS SERVICE INC
MIAMI, FL
(305) 621-6666
800-766-8966
800-824-8875
(800) 464-2222
FAX: (602) 232-5862
(916) 567-0266 FAX
800-525-3532
FAX: (303) 778-0268
FAX: (305) 621-6656
GCS SERVICE INC.
SAN DIEGO, CA
(858) 549-8411
GCS SERVICE INC.
PHOENIX, AZ
GCS SERVICE INC
ORLANDO, FL
CONNECTICUT
(602) 474-4510
800-422-7278
(407) 841-2551
800-510-3497
FAX: (602) 470-4511
FAX: (858) 549-2323
GCS SERVICE INC.
HARTFORD, CT
(860) 549-5575
800-423-1562
800-338-7322
FAX: (407) 423-8425
INDUSTRIAL ELECTRIC SVC.
5662 ENGINEER DRIVE
HUNTINGTON BEACH, CA 92649 FAX: (860) 527-6355
(714) 379-7100
(800-457-3783
ARKANSAS
NASS PARTS AND SERVICE, INC.
1144 BELVILLE ROAD, UNIT 359
DAYTONA BEACH, FL 32114
(386) 226-2642
BROMLEY PARTS & SVC
10TH AND RINGO
SUPERIOR KITCHEN SERVICE
P.O. BOX 1688
FAX: (714) 379-7109
INC.
(800) 432-2795
LITTLE ROCK, AR 72202
(501) 374-0281
800-482-9269
FAX: (501) 374-8352
22 THOMPSON ROAD
WINDSOR, CT 06088
(888) 590-1899
(386) 736-7695 FAX
P & D APPLIANCE SVC
100 SOUTH LINDEN AVE.
S. SAN FRANCISCO, CA 94080
(650) 635-1900
GCS SERVICE INC
TAMPA, FL
(813) 626-6044
800-282-3008
(888) 590-1996 FAX
800-424-1414
DELAWARE
FAX: (650) 635-1919
FAX: (813) 621-1174
GCS SERVICE,INC.
3717 CHERRY ROAD
MEMPHIS, TN 38118
(901) 366-4587
FOOD SERVICE EQMT.
2101 PARKWAY SOUTH
BROOMALL, PA 19008
(610) 356-6900
800-262-9155
FAX: (901) 366-4588
FAX: (610) 356-2038
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
40
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS
FLORIDA TO MARYLAND
JONES-McLEOD APPLIANCE
SVC
854 LAKESIDE DRIVE
MOBILE, AL 36693
(251) 666-7278
800-237-9859
FAX: (251) 661-0223
HAWAII
INDIANA
CERTIFIED SERVICE CENTER
1051 GOODWIN DRIVE
LEXINGTON, KY 40505
(606) 254-8854
800-432-9269
FAX: (606) 231-7781
FOOD EQMT. PARTS &
SERVICE CO.
300 PUUHALE RD.
HONOLULU, HI 96819
(808) 847-4871
GCS SERVICE INC.
INDIANAPOLIS, IN
(317) 545-9655
800-727-8710
FAX: (317) 549-6286
FAX: (808) 842-1560
B622 LA PAS TRAIL
INDIANAPOLIS, IN 46268
(317) 290-8060
GCS SERVICE INC.
LOUISVILLE, KY
(502) 367-1788
800-752-6160
FAX: (502) 367-0400
NASS PARTS AND SERVICE, INC.
1108 SOUTH WOODS AVENUE
ORLANDO, FL 32805
(407) 425-2681
IDAHO
(800) 410-9794
RESTAURANT APPLIANCE SVC. (317) 290-8085 FAX
(800) 432-2795
7219 ROOSEVELT WAY NE
(407) 425-3463 FAX
SEATTLE, WA 98115
(206) 524-8200
IOWA
GCS SERVICE INC.
LEXINGTON, KY
(606) 255-0746
GOODWIN TUCKER GROUP
NASS PARTS AND SERVICE, INC. 800-433-9390
1376 HEIDE AVENUE
PALM BAY, FL 32907
(321) 952-2012
FAX: (206) 525-2890
2900 DELAWARE AVENUE
DES MOINES, IA 50317
(515) 262-9308
800-432-9260
FAX: (606) 255-0748
(800) 432-2795
RON'S SERVICE
800-372-6066
LOUISIANA
(321) 953-0266 FAX
703 E 44TH STREET STE 10
GARDEN CITY, ID 83714
(208) 375-4073
FAX: (515) 262-2936
HERITAGE SERVICE GROUP
1532 RIVER OAKS WEST
NEW ORLEANS, LA 70123
(504) 734-8864
(800) 499-2351
(504) 733-2559 FAX
GEORGIA
FAX: (208) 375-4402
CONES REPAIR SVC.
1056 27TH AVENUE SW
CEDAR RAPIDS, IA 52404
(319) 365-3325
800-747-3326
FAX: (319) 365-0885
GCS SERVICE INC
ATLANTA, GA
(770) 452-7322
800-334-3599
ILLINOIS
CONES REPAIR SVC.
2408 40TH AVE.
MOLINE, IL 61265
(309) 797-5323
800-716-7070
FAX: (309)797-3631
FAX: (770) 452-7473
MAINE
HERITAGE FOODSERVICE
GROUP OF ATLANTA
2100 NORCROSS PKWY. SUITE
130
NORCROSS, GA 30071
(770) 368-1465
KANSAS
GCS SERVICE INC.
CHELSEA, MA
(617) 889-9393
800-225-1155
FAX: (617) 889-1222
GCS SERVICE INC.
KANSAS CITY, MO
(816) 920-5999
800-229-6477
FAX: (816) 920-7387
EICHENAUER SERVICES INC.
130 S OAKLAND ST.
DECATUR, IL 62522
(217) 429-4229
800-252-5892
FAX: (217) 429-0226
866-388-9837
FAX: (866) 388-9838
MASSACHUSETTS RESTAU-
RANT SUPPLY
34 SOUTH STREET
SOMERVILLE, MA 02143
(617) 868-1930
GENERAL PARTS, INC.
1101 E. 13TH STREET
KANSAS CITY, MO 64106
(816) 421-5400
WHALEY FOODSERVICE
REPAIRS
109-A OWENS INDUSTRIAL
DRIVE
800-338-6737
FAX: (617) 686-5331
(800) 279-9967
SAVANNAH, GA 31405
(912) 447-0827
888-765-0036
GCS SERVICE INC.
ELMHURST, IL
(630) 941-7800
(816) 421-1270 FAX
PINE TREE FOOD EQUIPMENT
175 LEWISTON ROAD
GRAY, ME 04039
KENTUCKY
FAX: (912) 447-0826
800-942-9689
FAX: (630) 941-6048
CERTIFIED SERVICE CENTER
127 DISHMAN LANE
BOWLING GREEN, KY 42101
(270) 783-0012
(207) 657-6400
(800) 540-5427
(207) 657-5464 FAX
PIERCE PARTS & SERVICE
2422 ALLEN ROAD
MACON, GA 31216
(478) 781-6003
GCS SERVICE INC.
ST. LOUIS, MO
(314) 683-7444
(877) 907-0012
MARYLAND
800-368-2512
800-284-4427
FAX: (270) 783-0058
FAX: (478) 781-7186
FAX: (314) 638-0135
EMR SERVICE DIVISION
700 EAST 25TH STREET
BALTIMORE, MD 21218
(410) 467-8080
800-879-4994
FAX: (410) 467-4191
CERTIFIED SERVICE CENTER
RAMCO BUSINESS PARK
4283 PRODUCE ROAD
LOUISVILLE, KY 40218
(502) 964-7007
GENERAL PARTS, INC.
248 JAMES STREET
BENSONVILLE, IL 60106
(630) 595-3300
(800) 880-3604
800-637-6350
FAX: (630)595-0006
FAX: (502) 964-7202
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
41
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS
MARYLAND TO NEW YORK
EMR SERVICE DIVISION
106 WILLIAMSPORT CIRCLE
SALISBURY, MD 21804
(410) 543-8197
MICHIGAN
GCS SERVICE INC.
ST. LOUIS, MO
(314) 638-7444
NEW HAMPSHIRE
GCS SERVICE INC.
LIVONIA, MI
GCS SERVICE INC.
CHELSEA, MA
800-284-4427
888-687-8080
FAX: (410) 548-4038
(248) 426-9500
800-772-2936
FAX: (248) 426-7555
FAX: (314) 638-0135
(617)889-9393
800-225-1155
FAX: (617) 889-1222
KAEMMERLIN PARTS & SVC.
2728 LOCUST STREET
ST. LOUIS, MO 63103
(314) 535-2222
FAX: (314) 535-6205
EMR SERVICE DIVISION
5316 Sunnyside Ave.
Beltsville, MD 20715
(301) 931-7000
ACE SERVICE CO.
95 HAMPTON AVE.
NEEDHAM, MA 02494
(781) 449-4220
800-225-4510 MA & NH
FAX: (781) 444-4789
JACKSON SERVICE COMPANY
3980 BENSTEIN RD.
COMMERCE TWSHP, MI 48382
(248) 363-4159
800-332-4053
FAX: (248) 363-5448
800-348-2365
FAX: (301) 931-3060
GCS SERVICE INC.
SILVER SPRING, MD
(301) 585-7550 (DC)
(410) 792-0338 (BALT)
(800) 638-7278
GENERAL PARTS, INC.
1101 EAST 13TH STREET
KANSAS CITY, MO 64106
(816) 421-5400
(800) 279-9967
(816) 421-1270 FAX
GCS SERVICE INC.
GRAND RAPIDS, MI
(616) 241-0200
800-823-4866
FAX: (616) 241-0541
MASSACHUSETTS RESTAURANT
SUPPLY
34 SOUTH STREET
SOMERVILLE, MA 02143
(617) 868-1930
FAX: (301) 495-4410
MONTANA
800-338-6737
MASSACHUSETTS
MINNESOTA
FAX: (617) 868-5331
RESTAURANT APPLIANCE SVC.
7219 ROOSEVELT WAY NE
SEATTLE, WA 98115
(206) 524-8200
800-433-9390
FAX: (206) 525-2890
ACE SERVICE CO.
95 HAMPTON AVE.
NEEDHAM, MA 02494
(781) 449-4220
800-225-4510 MA & NH
FAX: (781) 444-4789
GCS SERVICE INC.
MINNEAPOLIS, MN
(612) 546-4221
800-345-4221
FAX: (612) 546-4286
NEW JERSEY
JAY HILL REPAIRS
90 CLINTON RD.
FAIRFIELD, NJ 07004
(973) 575-9145
800-836-0643
GENERAL PARTS, INC.
MASSACHUSETTS RESTAURANT 11311 HAMPSHIRE AVENUE
NEBRASKA
FAX: (973) 575-5890
SUPPLY
SOUTH
GOODWIN - TUCKER GROUP
34 SOUTH STREET
SOMERVILLE, MA 02143
(617) 868-1930
BLOOMINGTON, MN 55438-2456 7535 D STREET
GCS SERVICE INC.
EAST RUTHERFORD, NJ
(973) 614-0003
(952) 944-5800
OMAHA, NE 68124
(402) 397-2880
(800) 279-9980
800-338-6737
(800) 279-9980 FAX
800-228-0342
800-399-8294
FAX: (617) 868-5331
FAX: (402) 397-2881
FAX: (973) 614-0230
MISSISSIPPI
GCS SERVICE INC.
CHELSEA, MA
(617) 889-9393
GCS SERVICE INC.
PHILADELPHIA, PA
(215) 925-6217
GCS SERVICE INC.
JACKSON, MS
NEVADA
800-225-1155
(601) 956-7800
HI TECH COMMERCIAL SERVICE 800-441-9115
FAX: (617) 889-1222
800-274-5954
FAX: (601) 956-1200
1840 STELLA LAKE STREET
NORTH LAS VEGAS, NV 89106
(702) 649-4616
(877) 924-4832
FAX: (702) 649-4607
FAX: (215) 925-6208
GCS SERVICE INC.
HARTFORD, CT
(860) 549-5575
ELMER SCHULTZ SERVICES
201 W. WASHINGTON AVE.
PLEASANTVILLE, NJ 08232
(609) 641-0317
GCS SERVICE INC.
MEMPHIS, TN
(901) 366-4587
800-723-1562
FAX: (860) 527-6355
800-262-9155
800-378-1641
FAX: (901) 366-4588
5454 LOUIE LANE
RENO, NV 89511
(775) 852-9696
FAX:(609) 641-8703
SUPERIOR KITCHEN SERVICE
INC.
MISSOURI
399 FERRY STREET
EVERETT, MA 02149
(617) 389-1899
(888) 590-1899
(617) 389-1996 FAX
FAX: (775) 852-5104
NEW YORK
GCS SERVICE INC.
KANSAS CITY, MO
(816) 920-5999
800-229-6477
FAX: (816) 920-7387
GCS SERVICE INC.
LAS VEGAS, NV
(702) 450-3495
800-500-9060
FAX: (702) 450-3491
APPLIANCE INSTALLATION AND
SERVICE CORP.
1336 MAIN STREET
BUFFALO, NY 14209
(716) 884-7425
800-722-1252
FAX: (716) 884-0410
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
42
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTER
NEW YORK TO PENNSYLVANIA
B.E.S.T. INC.
AUTHORIZED APPLIANCE
SERVICECENTER
904 S. MARSHALL ST.
WINSTON-SALEM, NC 27403
(336) 725-5396
OHIO
OREGON
3003 GENESEE STREET
BUFFALO, NY 14225
(716) 893-6464
800-338-5011
FAX: (716) 893-6466
CERTIFIED SERVICE CENTER
890 REDNA TERRACE
CINCINNATI, OH 45215
(513) 772-6600
RON'S SERVICE
16364 SW 72ND AVE
PORTLAND, OR 97224
(503) 624-0890
FAX:(336) 721-1289
800-543-2060
800-851-4118
AUTHORIZED APPLIANCE
SERVICECENTER
104 HINTON AVE.
WILMINGTON, NC 28403
(910) 313-1250
FAX:(910) 313-6130
FAX: (513) 612-6600
FAX: (503) 684-6107
DUFFY'S EQUIPMENT SVC.
3138 ONEIDA STREET
SAUQUOIT, NY 13456
(315) 737-9401
800-443-8339
FAX: (315) 737-7132
CERTIFIED SERVICE CENTER
171J-K NORTH HAMILTON RD.
COLUMBUS, OH 43213
(614) 751-3769
(866) 862-1252
FAX: (614) 751-5792
PENNSYLVANIA
A.I.S. COMMERCIAL PARTS &
SERVICE
1816 WEST 26TH STREET
ERIE, PA 16508
(814) 456-3732
800-332-3732
WHALEY FOODSERVICE
8334-K ARROWRIDGE BLVD
CHARLOTTE, NC 28273
(704) 529-6242
FAX: (704) 529-1558
NORTHERN PARTS & SVC.
21 NORTHERN AVENUE
PLATTSBURGH, NY 12903
(518) 563-3200
800-634-5005
FAX: (800) 782-5424
CERTIFIED SERVICE CENTER
6025 N. DIXIE DRIVE
DAYTON, OH 45414
(937) 898-4040
(800) 257-2611
FAX: (937) 898-4177
FAX: (814) 452-4843
WHALEY FOODSERVICE
REPAIRS
203-D CREEK RIDGE RD.
GREENSBORO, NC 27406
(336) 333-2333
ELMER SCHULTZ SVC.
540 NORTH 3RD STREET
PHILADELPHIA, PA 19123
(215) 627-5400
FAX: (215) 627-5408
GCS SERVICE INC.
BROOKLYN, NY
(718) 486-5220
FAX: (336) 333-2533
COMMERCIAL PARTS & SVC.
OF COLUMBUS
800-969-4271
FAX: (718) 486-6772
5033 TRANSAMERICA DRIVE
COLUMBUS, OH 43228
(614) 221-0057
800-837-8327
FAX: (614) 221-3622
GCS SERVICE INC.
PHILADELPHIA, PA
(215) 925-6217
800-441-9115
FAX: (215) 925-6208
WHALEY FOODSERVICE
REPAIRS
335-105 SHERWEE DRIVE
RALEIGH, NC 27603
(919) 779-2266
ALL SERVICE KITCHEN
EQUIPMENT REPAIR
10 CHARLES ST.
NEW HYDE PARK, NY 11040
(516) 378-1176
FAX: (919) 779-2224
GCS SERVICE INC.
COLUMBUS, OH
(614) 476-3225
GCS SERVICE INC.
HARRISBURG, PA
(717) 564-3282
FAX: (516) 378-1735
ALL ISLAND REPAIRS
40-9 BURT DRIVE
DEER PARK, NY 11729
(631) 242-5588
WHALEY FOODSERVICE
REPAIRS
6418-101 AMSTERDAM WAY
WILMINGTON, NC 28405
(910) 791-0000
800-282-5406
FAX: (614) 476-1196
800-367-3225
FAX: (717) 564-9286
ELECTRICAL APPLIANCE
REPAIR SVC.
5805 VALLEY BELT ROAD
CLEVELAND, OH 44131
(216) 459-8700
GCS SERVICE INC.
PITTSBURGH, PA
(412) 787-1970
800-738-1221
FAX: (412) 787-5005
FAX: (631) 242-6102
FAX: (910) 791-6662
NORTH CAROLINA
AUTHORIZED APPLIANCE
SERVICECENTER
1020 TUCKASEEGEE RD.
CHARLOTTE, NC 28208
(704) 377-4501
NORTH DAKOTA
800-621-8259
FAX: (216) 459-8707
K & D PARTS AND SERVICE CO.
1833-41 N CAMERON STREET
HARRISBURG, PA 17103
(717) 236-9039
GCS SERVICE INC.
MINNEAPOLIS, MN
(612) 546-4221
OKLAHOMA
(800) 532-6127
800-345-4221
800-932-0503
FAX:(704) 377-4504
FAX: (612) 546-4286
HAGAR RESTAURANT EQMT.
1229 W MAIN STREET
OKLAHOMA CITY, OK 73106
(405) 235-2184
800-445-1791
FAX: (405) 236-5592
FAX: (717) 238-4367
AUTHORIZED APPLIANCE
SERVICECENTER
800 N. PERSON ST.
RALEIGH, NC 27604
(919) 834-3476
GENERAL PARTS, INC.
10 SOUTH 18TH STREET
FARGO, ND 58103
(701) 235-4161
(800) 279-9987
(701) 235-0539 FAX
CLARK SERVICE & PARTS
306 AIRPORT DRIVE
BOX 10
SMOKETOWN, PA 17576
(717) 392-5590
FAX:(919) 834-3477
(717) 392-5735
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
43
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS
RHODE ISLAND TO WISCONSIN
RHODE ISLAND
WHALEY FOODSERVICE
REPAIRS
4740-A FRANCHISE STREET
N. CHARLESTON, SC 29418
(843) 760-2110
GCS SERVICE INC.
HOUSTON, TX
(713)785-9187
800-868-6957
FAX: (713) 785-3979
GCS SERVICE INC.
VIRGINIA BEACH, VA
(757) 464-3500
800-476-4278
FAX: (757) 464-4106
GCS SERVICE INC.
EAST PROVIDENCE, RI
(401) 434-6803
800-462-6012
FAX: (843) 760-2255
FAX: (401) 438-9400
GCS/STOVE PARTS
2120 SOLANA STREET
FORT WORTH, TX 76117
(817) 831-0381
WASHINGTON
SUPERIOR KITCHEN SERVICE
INC.
SOUTH DAKOTA
GCS SERVICE INC.
SEATTLE, WA
669 ELMWOOD AVENUE
PROVIDENCE, RI 02907
(888) 590-1899
GCS SERVICE INC.
MINNEAPOLIS, MN
(612) 546-4221
800-433-1804
FAX: (817) 834-7754
(206) 763-0353
800-211-4274
FAX: (206) 763-5943
(401) 781-1996 FAX
800-345-4221
FAX: (612) 546-4286
UTAH
RESTAURANT APPLIANCE SER-
VICE
SOUTH CAROLINA
GENERAL PARTS, INC.
10 SOUTH 18TH STREET
FARGO, ND 58103
(701) 235-4161
(800) 279-9987
(701) 235-0539 FAX
LA MONICA'S RESTAURANT
EQMT. SVC.
6182 SOUTH STRATLER AVENUE (206) 524-8200
MURRAY, UT 84107
(801) 263-3221
800-527-2561
7219 ROOSEVELT WAY, NE
SEATTLE, WA 98115
AUTHORIZED APPLIANCE
SERVICECENTER
1811 TAYLOR ST.
COLUMBIA, SC 29202
(803) 254-8414
800-433-9390
FAX: (206) 525-2890
FAX: (803) 254-5146
FAX: (801) 263-3229
TENNESSEE
WEST VIRGINIA
AUTHORIZED APPLIANCE
SERVICECENTER
2249 AUGUSTA RD.
GREENVILLE, SC 29605
(864) 235-9616
GCS SERVICE INC.
MEMPHIS, TN
(901) 366-4587
800-262-9155
FAX: (901) 366-4588
VERMONT
STATEWIDE SERVICE, INC.
603 MAIN AVE.
NITRO, WV 25143
(304) 755-1811
(800) 441-9739
FAX: (304) 755-4001
NORTHERN PARTS & SVC.
4874 S. CATHERINE STREET
PLATTSBURGH, NY 12901
(518) 563-3200
800-634-5005
FAX: (800) 782-5424
FAX: (864) 235-9623
WHALEY FOODSERVICE
REPAIRS
I 26&US1
GCS SERVICE INC.
NASHVILLE, TN
(615) 244-8050
WISCONSIN
P.O. BOX 4023
800-831-7174
WEST COLUMBIA, SC 29170
(803) 791-4420
800-877-2662
FAX: (803) 794-4630
FAX: (615) 244-8885
GCS SERVICE INC.
CHELSEA, MA
(617)889-9393
800-225-1155
APPLIANCE SERVICE CENTER,
INC.
2439 ATWOOD AVE
MADISON, WI 53704
(608) 246-3160
TEXAS
ARMSTRONG REPAIR CENTER FAX: (617) 889-1222
5110 GLENMOUNT DRIVE
800-236-7440
WHALEY FOODSERVICE
REPAIRS
HOUSTON, TX 77081
(713) 666-7100
VIRGINIA
FAX: (608) 246-2721
748 CONGAREE ROAD
GREENVILLE, SC 29607
(864) 234-7011
800-494-2539
FAX: (864) 234-6662
800-392-5325
FAX: (713) 661-0520
DAUBERS, INC.
7645 DYNATECH COURT
SPINGFIELD, VA 22153
(703) 866-3600
APPLIANCE SERVICE
CENTER, INC.
6843 W. BELOIT RD.
WEST ALLIS, WI 53219
(414) 543-6460
COMMERCIAL KITCHEN REPAIR 800-554-7788
CO.
FAX: (703) 866-4071
1377 N BRAZOS
P.O BOX 831128
SAN ANTONIO, TX 78207
(210) 735-2811
800-292-2120
FAX: (210) 735-7421
800-236-6460
FAX: (414) 543-6480
WHALEY FOODSERVICE
REPAIRS
1406-C COMMERCE PL.
MYRTLE BEACH, SC 29577
(843) 626-1866
GCS SERVICE INC.
SILVER SPRING, MD
(301) 585-7550(DC)
(410) 792-0388(BALT)
800-638-7278
APPLIANCE SERVICE
CENTER
786 MORRIS AVE
GREEN BAY, WI 54304
(920) 496-9993
800-236-0871
FAX: (920) 496-9927
FAX: (843) 626-2632
FAX: (301)495-4410
GCS SERVICE INC.
DALLAS, TX
(972) 484-2954
800-442-5026
GCS SERVICE INC.
RICHMOND, VA
(804) 672-1700
FAX: (972) 484-2531
800-899-5949
FAX: (804) 672-2888
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
44
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS
WISCONSIN TO WYOMING/INTERNATIONAL
GENERAL PARTS, INC.
W223 N735 SARATOGA DRIVE
WAUKESHA, WI 53186
(262) 650-6666
(800) 279-9946
(262) 650-6660 FAX
WYOMING
HAWKINS COMMERCIAL APPLI-
ANCE SERVICE
3000 S. WYANDOT ST.
ENGLEWOOD, CO 80110
(303) 781-5548
(800) 624-2117
FAX: (303) 761-5561
METRO APPLIANCE SERVICE
1640 S BROADWAY
DENVER, CO 80210
(303) 778-1126
800-525-3532
FAX: (303) 778-0268
INTERNATIONAL
GLOBAL PARTS AND SUPPLY
7758 NW 72ND ST
MIAMI, FL 33166
(305) 885-6353
H.D. SHELDON AND CO
19 UNION SQUARE, WEST
NEW YORK, NY 10003
(212) 627-1759
(212) 924-6920
CANADA
THE GARLAND GROUP
1177 KAMATO ROAD
MISSISSAUGA, ONTARIO L4W
1X4
(905) 206-8380
SALES
(905) 624-1419
FAX: (905) 624-1851
SERVICE
800-427-6668
FAX: 800-361-7745
March 13, 2007
Delta 5 Installation & Operation Manual 7610-003-37-08
Issued: 05-25-2007 Revised: 03-08-2013
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|