MICRO COMPONENT SYSTEM
UX-GB9DAB
—Consists of CA-UXGB9DAB and SP-UXGB9DAB
INSTRUCTIONS
GVT0172-001A
[B]
Download from Www.Somanuals.com. All Manuals Search And Download.
Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic equipment should not be disposed
as general household waste at its end-of-life. Instead, the product should be handed over
to the applicable collection point for the recycling of electrical and electronic equipment for
proper treatment, recovery and recycling in accordance with your national legislation.
By disposing of this product correctly, you will help to conserve natural resources and will
help prevent potential negative effects on the environment and human health which could
otherwise be caused by inappropriate waste handling of this product. For more information
about collection point and recycling of this product, please contact your local municipal
office, your household waste disposal service or the shop where you purchased the product.
Attention:
This symbol is only
valid in the
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
European Union.
(Business users)
obtain information about the take-back of the product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with applicable national
legislation or other rules in your country for the treatment of old electrical and electronic
equipment.
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Precautions
How to Read This Manual
• Button and control operations are explained in the table
below.
Installation
• Install in a place which is level, dry and neither too hot nor
too cold—between 5°C and 35°C.
•
Some related tips and notes are explained later in the
sections “Learning More about This System” and
“Troubleshooting,” but not in the same section
• Install the System in a location with adequate ventilation to
prevent internal heat buildup inside the System.
explaining the operations
(
indicates that the
content has some information).
DO NOT install the System in a location near
heat sources, or in a place subject to direct
sunlight, excessive dust or vibration.
Indicates that you press the button
briefly
.
• Leave sufficient distance between the System and the TV.
• Keep the speakers away from the TV to avoid interference
with the TV.
Indicates that you press the button
briefly and repeatedly until an
option you want is selected.
Power sources
• When unplugging the System from the wall outlet, always
pull on the plug, not the AC power cord.
Indicates that you press one of the
buttons.
DO NOT handle the AC power cord with wet
hands.
Indicates that you press and hold the
button for specified seconds.
• The number inside the arrow
indicates the period of press (in this
example, 2 seconds).
2 sec.
Moisture condensation
Moisture may condense on the lenses inside the System in
the following cases:
• If no number is inside the arrow,
press and hold until the entire
procedure is complete or until you
get a result you want.
• After starting to heat the room
• In a damp room
• If the System is brought directly from a cold to a warm
place
Should this occur, the System may malfunction. In this case,
leave the System turned on for a few hours until the moisture
evaporates, unplug the AC power cord, then plug it in again.
Indicates that you turn the control
toward the specified direction(s).
Others
• Should any metallic object or liquid fall into the System,
unplug the AC power cord and consult your dealer before
operating any further.
Indicates that this operation is only
possible using the remote control.
Remote
ONLY
DO NOT disassemble the System since there
are no user serviceable parts inside.
Indicates that this operation is only
possible using the buttons and controls on
the main unit.
Main Unit
ONLY
• If you are not going to operate the System for an extended
period of time, unplug the AC power cord from the wall
outlet.
If anything goes wrong, unplug the AC power cord and
consult your dealer.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction ............................................................... 1
Connections................................................................ 3
Before Operating the System.................................... 6
Daily Operations—Playback .................................... 7
Listening to the Radio.................................................................. 8
Playing Back a Disc ..................................................................... 8
Playing Back a Portable Audio Device........................................ 9
Daily Operations—Sound&Other Adjustments... 10
Adjusting the Volume ................................................................ 10
Adjusting the Sound................................................................... 10
Changing the Display Brightness............................................... 11
Adjusting the Audio Input Level ............................................... 11
Setting the Clock........................................................................ 11
Turning Off the Power Automatically ....................................... 11
Radio Data System Operations .............................. 12
Changing the Display Mode ...................................................... 12
Searching for a Program by PTY Codes.................................... 12
Switching Temporarily to a Program of Your Choice
Automatically......................................................................... 13
Description of the PTY codes for Radio Data System............... 13
DAB Operations....................................................... 14
Listening to a Service................................................................. 14
Presetting Services ..................................................................... 15
Changing the Display Mode ...................................................... 16
Searching for a Service by PTY Codes...................................... 16
Switching Temporarily to a Service of Your Choice
Automatically......................................................................... 17
Description of the PTY codes for DAB..................................... 17
Advanced Disc Operations...................................... 18
Programming the Playing Order—Program Play ...................... 18
Playing at Random—Random Play ........................................... 19
Playing Repeatedly—Repeat Play ............................................. 19
Prohibiting Disc Ejection—Child Lock..................................... 19
Timer Operations .................................................... 20
Setting the Timer........................................................................ 20
Timer Priority............................................................................. 21
Additional Information........................................... 22
Learning More about This System............................................. 22
Troubleshooting ......................................................................... 23
Maintenance............................................................................... 23
Specifications............................................................................. 24
Parts Index.................................................................................. 24
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Supplied accessories
After unpacking, check to be sure that you have all the following items:
• DAB antenna (1)
• FM antenna (1)
• Remote control (1)
• Batteries (2)
• AM loop antenna (1)
If any item is missing, consult your dealer immediately.
Do not connect the AC power cord until all other connections have been made.
Rear view
1
2
From DAB antenna
See page 4.
From AM/FM antenna
See page 4.
3
4
From the speakers
See page 5.
To a wall outlet
Plug in the AC power cord only after all
connections are complete.
Front view
AUX
PHONES
From the analog audio output of portable
audio devices
See page 5.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect the AM loop antenna
1
DAB antenna
FM antenna (supplied)
Extend it so that you can
obtain the best reception.
DAB antenna (supplied)
Extend the wire so that you can
receive your desired ensembles.
AM loop antenna (supplied)
Turn it until the best reception is
obtained.
For the better DAB reception
Active antenna
(not supplied)
• If the AM loop antenna wire is covered with vinyl, remove
the vinyl to expose the tip of the antenna by twisting the
vinyl.
For the better AM/FM reception
• See also “To improve DAB reception” on page 15.
2
AM/FM antenna
Outdoor FM antenna
(not supplied)
To assemble the AM loop antenna
AM loop antenna (supplied)
Keep it connected.
Vinyl-covered wire (not supplied)
Extend it horizontally.
• Disconnect the supplied FM antenna, and connect to an
outdoor FM antenna using a 75 Ω wire with coaxial type
connector (IEC or DIN45325).
• Make sure the antenna conductors do not touch any other
terminals, connecting cords, or the power cord. Also, keep
the antennas away from metallic parts of the System,
connecting cords, and the AC power cord. This could cause
poor reception.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Speakers
To connect a portable audio device
To connect the speaker cords
Make sure that both speakers are connected correctly and
firmly.
AUX jack
DOWN
UP
1 Hold
2 Insert
3 Release
AUX
PHONES
Stereo mini plug cord
(not supplied)
Portable audio device
Red
From left speaker
From right speaker
• By using QP Link (Quick Portable Link), you can easily
start playing back a portable audio device on this unit. See
page 9 for details.
• If an external device is not equipped with a stereo mini plug
audio output, use a plug adapter to convert the stereo mini
plug to the corresponding plug of the audio output.
Black
Red
• When connecting the speaker cords, match the polarity of
the speaker terminals: red cord to (+) and black cord to (–).
• If the speaker cords are covered with vinyl, remove the
vinyl to expose the tip of the speaker cord by twisting the
vinyl.
Preparing the remote control
R03(UM-4)/AAA(24F)
• DO NOT connect more than one speaker to
each terminal.
• DO NOT allow the conductor of the speaker
cords to be in touch with the metallic parts of
the System.
• Dispose of batteries in the proper manner, according to
federal, state, and local regulations.
To remove the speaker grilles:
DO NOT recharge, short, disassemble, heat
the battery or dispose of it in a fire.
Holes
Projections
When using the remote control
Point the top of the remote control toward the remote sensor
as directly as possible. If you operate it from a diagonal
position, the operating range (approx. 5 m) may be shorter.
Speaker
grille
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operating the System
The indications on the display tell you a lot of things while you are operating the System.
Before operating the System, be familiar with when and how the indicator illuminates on the display.
1 Disc operation indicators
• PRGM (Program Play): lights when Program Play mode
1 2 3
4
5
6
is activated.
PRGM RND TA NEWS INFO FM AM ST MONO L-BAND
SLEEP
123
7
8
• RND (Random Play): lights when Random Play mode is
activated.
Repeat Play:
1
MP3
S.TURBO
AHB PRO
A.STBY
•
QP Link
–
–
: lights when One Track Repeat is activated.
: lights when All Track Repeat or One Group
Repeat is activated.
9
q
p
2 MP3 indicator
Indications on the main display
• Lights when an MP3 track is detected.
3
TA/NEWS/INFO—Program type (PTY) indicators
• Lights to indicate the currently selected program type for
PTY Standby Reception.
• Flashes when a program is automatically tuned in with
PTY Standby Reception.
• While listening to radio: • While selecting AUX:
FM
S.TURBO
QP Link
S.TURBO
QP Link
4 Radio reception indicators
Source name
Band
Frequency
• FM: lights while receiving an FM stereo station.
–ST (stereo): lights while an FM stereo station or a DAB
service with sufficient signal strength is tuned in.
–MONO: lights while receiving an FM stereo station in
monaural.
• While listening to DAB:
ST
BAND
S.TURBO
QP Link
• AM: lights while receiving an AM station.
5 DAB reception indicators
Frequency
• L-BAND: lights while receiving a DAB ensemble in
L-Band.
• While playing a CD/MP3*:
S.TURBO
QP Link
• BAND III: lights while receiving a DAB ensemble in
Band III.
6 Timer indicators
Track number
Elapsed playing time
•
: lights when Daily Timer is on standby; flashes while
working or being set.
• While disc play is stopped:
• 1/2/3: lights when a Daily Timer (1, 2, or 3) is on standby;
flashes while working or being set.
CD:
S.TURBO
• SLEEP: lights when Sleep Timer is activated.
7 S.TURBO (Sound Turbo) indicator
• Lights when Sound Turbo is activated.
8 AHB PRO (Active Hyper Bass Pro) indicator
• Lights when AHB Pro is activated.
9 QP Link (Quick Portable Link) indicator
• Lights when QP Link is activated.
p A.STBY (Auto Standby) indicator
• Lights when Auto Standby is activated.
• Flashes for about 3 minutes before Auto Standby turns
the System off.
QP Link
Total track number
Total playing time
MP3:
MP
S.TURBO
3
QP Link
Group number
Track number
*When you start or stop playing an MP3 disc, the group
(folder) number, group (folder) name, track (file)
number, track (file) name (and ID3 Tag) will be shown
before the elapsed playing time appears.
q Main display
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily Operations—Playback
In this manual, the operations using the remote
control are explained mainly; however, you can use
the buttons and controls on the main unit if they have
the same (or similar) name and symbol.
1
SET/ANT. P.
CANCEL
1 Turn on the power.
QP LINK
DIMMER
The STANDBY lamp on the main unit turns off.
2
4,¢
Without pressing STANDBY/ON
...
PTY SEARCH
• The System turns on by pressing one of the source
buttons.
7
PRESET/GROUP/PTY
DOWN,UP
• The System turns on and activates the AUX source
by starting playback on an external device when
QP Link is activated. (See page 9 for details.)
NUMBER
SELECT
FM MODE/
PLAY MODE
2 Select the source.
Playback automatically starts if the selected source is
ready.
3
3 Adjust the volume.
4 Operate the target source as explained
later.
To turn off (standby) the unit
STANDBY/ON
1
2
The STANDBY lamp on the main unit lights
STANDBY/ON
in red.
• A small amount of power is always
consumed even while on standby.
You can reduce power consumption by pressing DIMMER
to turn the display off while on standby.
• When the display is turned off, QP Link does not work.
DAB
FM AM
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
connecting or putting on the headphones.
• Disconnecting the headphones will activate the
speakers again.
VOLUME
3
4
DO NOT turn off (standby) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select a preset number for the station you store.
Listening to the Radio
• For DAB operations, see page 14.
PRESET/GROUP/PTY
SET
DOWN
UP
ANT. P.
Increases the
To select the band (FM or AM)
preset numbers.
Remote control:
Main unit:
Decreases the
preset numbers.
FM AM
DAB
AM FM
DAB/
FM/AM
FM
FM
S.TURBO
S.TURBO
QP Link
QP Link
Remote
ONLY
To tune in to a station
To tune in to a preset station
While FM or AM is selected...
After selecting the band, select the preset number for the
preset station.
Remote control:
Main unit:
PRESET/GROUP/PTY
2 sec.
2 sec.
DOWN
UP
Increases the preset numbers.
Decreases the preset numbers.
DOWN
UP
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
Playing Back a Disc
This System can play back the following discs—regular CD
and CD-R/CD-RW (recorded either in the audio CD or MP3
format).
To stop searching manually, press 4 or ¢.
Remote
ONLY
If the FM station has poor reception
To insert a disc
You can insert a disc while playing another source.
The MONO indicator lights on the display.
FM MODE/
Reception will improve though stereo effect
is lost—Monaural reception mode.
PLAY MODE
To restore the stereo effect, press the button
again (the MONO indicator disappears).
Remote
ONLY
To preset the stations
You can preset 30 FM and 15 AM stations.
To close the disc tray, press 0 again.
• If you press CD 6, disc tray closes automatically and
playback starts.
1 Tune in to a station you want to preset.
• You can also store the monaural reception mode for FM
preset stations if selected (see above).
To start:
To pause:
To stop:
2 Activate the preset number entry mode.
PTY SEARCH
SET
ANT. P.
S.TURBO
QP Link
To release, press again.
• Finish the following process while the indication on the
display is flashing.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
To select track numbers on an MP3 disc, enter the
number in three digits. Refer to the following examples:
When selecting track 24...
1 Press SET to skip the first digit.
2 Select “2” for the second digit pressing UP or DOWN
button repeatedly, then press SET.
To select a track
Increases the track numbers.
Decreases the track numbers.
3 Select “4” for the last digit pressing UP or DOWN
button repeatedly, then press SET or CD 6.
If you enter a track number that does not exist on the MP3
disc...
• During playback, your entry will be ignored and
playback will continue with the current track.
• While playback is stopped, disc playback will remain at
the first track in the first group until you press CD 6,
then playback will start.
To select a group (MP3 only)
1 While disc play is stopped, activate the group select
mode.
Track select
mode
MP
S.TURBO
3
PTY SEARCH
QP Link
Group select
mode
MP
S.TURBO
3
• To go back a step, press CANCEL.
QP Link
2 Select a group number.
Playing Back a Portable Audio Device
Remote
ONLY
Increases the group numbers.
Decreases the group numbers.
By using QP Link (Quick Portable Link), you can easily start
playing back a portable audio device connected to the AUX
jack.
Group number and group name appear.
Remote
ONLY
• Make sure to set the volume of your portable audio device
loud enough so that the System can detect the sound signal.
To locate a particular portion
While playing a disc, press and hold until the portion you
want is reached.
To activate QP Link
QP LINK
QPL ON
PRESET/GROUP/PTY
(Initial setting)
DOWN
UP
Fast-forwards the track.
Fast-reverses the track.
QPL OFF
When QP Link is activated, connecting a portable device to
the AUX jack and starting playback performs the following:
• While listening to another source...
Changes the source to AUX automatically. (If you change
from AUX to another source, QP Link will be canceled.)
• While the System is on standby...
Remote
ONLY
To locate a track directly
1 Activate the track number entry mode.
Turns on the System and activates the AUX source
automatically (except when the display is turned off).
• For regular CDs
S.TURBO
NUMBER
SELECT
QP Link
S.TURBO
Bubbles appear when
QP Link works.
• For MP3 discs
MP
S.TURBO
3
QP Link
QP Link
2 Enter a track number you want to play back.
While QP Link plays back the device...
Bubbles disappear when the
PRESET/GROUP/PTY
SET
ANT. P.
DOWN
UP
S.TURBO
sound signal stops or is too
Increases the
numbers.
QP Link
weak.
Decreases the
numbers.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily Operations—Sound&Other Adjustments
Remote
ONLY
To drop the volume in a moment
Remote control
To restore the volume, press again, or
adjust the volume level.
FADE
MUTING
SLEEP
A. STANDBY
CLOCK/
TIMER
SET/ANT. P.
CANCEL
Adjusting the Sound
DIMMER
To emphasize the sound—Sound Turbo
This function emphasizes the sound.
PRESET/GROUP/PTY
DOWN,UP
SOUND
TURBO
TURBO ON
DISPLAY
MODE
(Initial setting)
AHB PRO
TURBOOFF
BASS/
TREBLE
SOUND
TURBO
(Canceled)
To reinforce the bass sound
—AHB Pro
You can reinforce the bass sound to maintain rich, full bass
at low volume—Active Hyper Bass Pro.
Remote
ONLY
FADE
MUTING
VOLUME
AHB ON
AHB PRO
Main unit
AHB OFF
(Canceled)
• You can activate AHB Pro only while Sound Turbo is
canceled.
SOUND
TURBO
DIMMER
Remote
ONLY
To adjust the tone—Bass/Treble
VOLUME
– / +
You can adjust the bass and treble level from –3 to +3.
DOWN 4
¢ UP
To adjust the bass
VOLUME
BASS/
TREBLE
BASS TRE
Canceled
To adjust the treble
Adjusting the Volume
The volume level can be adjusted between “VOL MIN” and
“VOLUME 1” – “VOLUME 40 (VOL MAX).”
BASS/
VOLUME
TREBLE
BASS TRE
Canceled
Remote control:
Main unit:
VOLUME
VOLUME
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Adjust the hour, then the minute.
Changing the Display Brightness
You can dim the display window.
PRESET/GROUP/PTY
SET
DOWN
UP
ANT. P.
DIMMER
DIM 1
DIM 2
DIM OFF
(Initial setting)
Now the built-in clock starts working.
DIM 1
DIM 2
Dims the display and the illumination on the
main unit.
To check the current time during play
DISPLAY
MODE
Clock
Dims the display more than DIM 1 and turns
off the illumination on the main unit.
Source information
Remote
ONLY
Adjusting the Audio Input Level
• For the display modes of Radio Data System, see page 12.
• For the display modes of DAB, see page 16.
If the sound from a component connected to the AUX jack is
too loud or is too quiet, you can change the audio input level
through the AUX jack (without changing the volume level).
While AUX is selected as a source...
Remote
ONLY
Turning Off the Power Automatically
Auto Standby
2 sec.
2 sec.
A. STANDBY
SET
ANT. P.
AUX LVL1 AUX LVL2
On
AUX LVL3
Canceled
(Initial setting)
When Auto Standby is in use, the A.STBY indicator lights
on the display.
AUX LVL 1 Select this when the sound is too loud.
The A.STBY indicator starts flashing:
• When disc playback stops
• When the sound signal from the AUX jack stops or is too
weak
AUX LVL 2 AUX Level 2 is preset at the intermediate
level between Level 1 and 3.
AUX LVL 3 Select this when the sound is too quiet.
The System will turn off (on standby) automatically if no
operation is done for about 3 minutes while the indicator is
flashing.
Remote
ONLY
Setting the Clock
Without setting the built-in clock, you cannot use Daily
Timers (see page 20) or Sleep Timer.
• To exit from the clock setting, press CLOCK as required.
• To go back a step, press CANCEL.
Sleep Timer
You can set the unit to turn off after a certain period of time.
1 Specify the time (in minutes).
SLEEP
1 Activate the clock setting mode.
10 20 30 60 90 120 150
CLOCK/
Canceled
TIMER
S.TURBO
QP Link
2 Wait until the set time disappears.
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
To check the time remaining until the shut-off time
SLEEP
SLEEP
S.TURBO
QP Link
• If you press the button repeatedly, you can change the shut-
off time.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Data System Operations
Searching for a Program by PTY Codes
Remote control
Remote
ONLY
You can locate a particular kind of program from the preset
channels (see page 8) by specifying the PTY codes.
To search for a program using the PTY codes
1 While listening to an FM station...
PTY SEARCH
FM
ST
7
PTY SEARCH
S.TURBO
QP Link
PRESET/GROUP/PTY
DOWN,UP
DISPLAY
MODE
REPEAT/
TA/News/Info
FM
ST
S.TURBO
QP Link
Receiving FM stations with Radio Data System
Radio Data System allows FM stations to send an additional
signal along with their regular program signals.
This System can receive the following types of Radio Data
System signals.
2 Select a PTY code.
PRESET/GROUP/PTY
• For details about each PTY code,
see page 13.
DOWN
UP
PS (Program
Service)
Shows commonly known station
names.
PTY (Program
Type)
Shows types of broadcast programs.
3 Start searching.
FM
ST
PTY SEARCH
RT (Radio Text)
Shows text messages the station
sends.
S.TURBO
QP Link
Enhanced Other
Networks
Provides the information about the
types of the programs broadcast by
the Radio Data System stations of
the different networks.
FM
ST
S.TURBO
QP Link
Ex. When “NEWS” is selected
Remote
ONLY
Changing the Display Mode
The receiver searches 30 preset FM stations, stops when
it finds the one you have selected, and tunes in to that
station.
• If no program is found, “NOTFOUND” appears on the
display.
While listening to an FM station...
DISPLAY
MODE
Clock*
PS
PTY
RT
Frequency*
• To stop searching any time during search, press
PTY SEARCH.
PS
Station names are displayed. “NO PS” will
appear if no signal is sent.
To continue searching after it stops on an unwanted
station
While the indications on the display are flashing...
PTY
RT
The broadcast program type is displayed.
“NO PTY” will appear if no signal is sent.
PTY SEARCH
Text messages the station sends are displayed.
“NO RT” will appear if no signal is sent.
* Non Radio Data System signal.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the PTY codes for Radio Data
System
Switching Temporarily to a Program of
Remote
ONLY
Your Choice Automatically
NEWS:
News.
AFFAIRS:
Topical program expanding or enlarging
upon the news—debate, or analysis.
Programs the purpose of which is to impart
advice in the widest sense.
Programs concerned with any aspect of
sports.
The Enhanced Other Networks function allows the System
to switch temporarily to a preset FM station broadcasting a
program of your choice (TA, NEWS, or INFO).
• This function works while listening to an FM station
providing the required signals.
INFO:
SPORT:
EDUCATE:
DRAMA:
CULTURE:
Educational programs.
All radio plays and serials.
Programs concerning any aspect of national
or regional culture, including language,
theater, etc.
Programs about natural sciences and
technology.
Used for mainly speech-based programs
such as quizzes, panel games and
personality interviews.
Commercial music of current popular
appeal.
While listening to an FM station, select the program type.
REPEAT
TA/News/Info
TA
NEWS
INFO
SCIENCE:
VARIED:
OFF
(Canceled)
TA
Traffic announcement in your area
See the right column.
POP M:
NEWS
INFO
ROCK M:
EASY M:
Rock music.
Current contemporary music considered to
be “easy-listening”.
LIGHT M:
Instrumental music, and vocal or choral
works.
How the Enhanced Other Networks function works:
CASE 1
CLASSICS: Performances of major orchestral works,
symphonies, chamber music, etc.
OTHER M:
If a station is not broadcasting the program of your
choice
The System continues tuning in to the current station.
Music not fitting into any of the other
categories.
WEATHER: Weather reports and forecasts.
FINANCE:
Stock Market reports, commerce, trading
etc.
«
When a station starts broadcasting the program of your
choice, the System automatically switches to that station.
The PTY code indicator starts flashing.
CHILDREN: Programs targeted at a young audience.
SOCIAL:
Programs about sociology, history,
geography, psychology and society.
Religious programs.
Involving members of the public expressing
their views either by phone or at a public
forum.
Travel information.
Programs about recreational activities.
Jazz music.
«
RELIGION:
PHONE IN:
When the program is over, the System goes back to the
previously tuned station, but the function still remains
active (the indicator stops flashing and remains lit).
TRAVEL:
LEISURE:
JAZZ:
CASE 2
If a station is broadcasting the program of your choice
The System automatically switches to the station. The PTY
code indicator starts flashing.
COUNTRY: Songs which originate from, or continue the
musical tradition of the American Southern
States.
NATION M: Current popular music of the nation or
region in that country’s language.
«
When the program is over, the System goes back to the
previously tuned station, but the function still remains
active (the indicator stops flashing and remains lit).
OLDIES:
Music from the so-called “golden age” of
popular music.
Music which has its roots in the musical
culture of a particular nation.
FOLK M:
CASE 3
DOCUMENT: Programs concerning factual matters,
presented in an investigative style.
TEST:
If the station currently tuned in is broadcasting the
program of your choice
The PTY code indicator starts flashing.
Broadcasts for testing emergency
broadcast equipment or unit.
Emergency announcement.
No program type, undefined program, or
difficult to categorize into particular types.
ALARM:
NONE:
«
When the program is over, the indicator stops flashing (the
function still remains active).
• Classification of the PTY codes for some FM stations may
be different from the above list.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
DAB Operations
Caution:
Remote control
Electrostatic discharge from your body may cause noise
from the speakers and you cannot hear the broadcast.
If this happens, turn off the System (on standby), then turn
it on again.
SET/ANT. P.
Listening to a Service
1 Select DAB.
Remote control:
DAB
Main unit:
PTY SEARCH
4,¢
7
DAB
DAB
AM FM
PRESET/GROUP/PTY
DOWN,UP
DAB/
DISPLAY
MODE
FM/AM
REPEAT
TA/News/Info
• When you change the source to DAB for the first time
after plugging in the AC power cord, the System
automatically scans the DAB bands for available
ensembles (see the next page).
Main unit
DAB/
2 Select an ensemble.
DOWN 4
¢ UP
FM/AM
Remote control:
Main unit:
2 sec.
2 sec.
DOWN
UP
What is DAB system?
DAB (Digital Audio Broadcasting) is one of the digital radio
broadcasting systems available today. It can deliver digital
quality sound without any annoying interference or signal
distortion. Furthermore, it can carry text, pictures and data.
In contrast to FM broadcast, where each program is
transmitted on its own frequency, DAB combines several
programs (called “services”) to form one “ensemble.”
“Primary services” (main radio stations) are sometimes
accompanied by “secondary services” to broadcast
additional programs.
You can choose from the ensembles found by the
ensemble scanning.
To choose from all the ensembles, see “To tune in to all
the ensembles” on the next page.
3 Select a service (either primary or secondary) you
want to listen to.
Remote control:
Main unit:
DOWN
UP
frequency
Hold 4/¢
ensemble
ensemble
12B (225.65MHz)
12C (227.36MHz)
Ex.
ST
BAND
service 1
service 2
service 3
S.TURBO
QP Link
Press 4/¢
• When the signal is strong enough, the ST indicator
lights on the display.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
Remote
ONLY
To scan for ensembles
Presetting Services
With the ensemble scanning function, the System scans the
DAB bands to pick out available ensembles under your
receiving condition.
• When you change the source to DAB for the first time after
plugging in the AC power code, the System automatically
performs the scanning.
You can preset 30 services in memory.
1 Tune in to an ensemble, then select a service you want
to preset.
2 Activate the preset number entry mode.
SET
ANT. P.
To perform the ensemble scanning manually
When you moved your System or adjusted the antenna
position, perform the scanning manually.
S.TURBO
QP Link
2 sec.
3 Select a preset number for the service you store.
SET
ANT. P.
PRESET/GROUP/PTY
SET
ANT. P.
DOWN
UP
Increases the
preset numbers.
When the scanning is complete, the System starts playing the
first service of the lowest-frequency ensemble found.
Decreases the
preset numbers.
To tune in to all the ensembles
You can tune in to every ensemble regardless of the signal
status.
BAND
BAND
S.TURBO
S.TURBO
QP Link
QP Link
• You can only preset primary services. If you select a
secondary service to store, its primary service is stored
instead.
PRESET/GROUP/PTY
DOWN
UP
12B
12C
12D
To tune in to a preset service
After selecting DAB as the source, select the preset number
for the preset station.
The frequency changes every second, going through all the
DAB ensembles.
Press and hold the button until the desired ensemble is
reached.
PRESET/GROUP/PTY
DOWN
UP
Increases the preset numbers.
Decreases the preset numbers.
Remote
ONLY
To improve DAB reception
With the supplied DAB antenna, you may not be able to
receive L-Band ensembles depending on your reception
condition. You can improve the reception of both L-Band
and Band III ensembles by connecting an active antenna (see
page 4) and supplying electricity to the antenna.
While on standby (Display ON)...
2 sec.
SET
ANT. P.
ANT.P ON
ANT.P OFF
(Canceled)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
Changing the Display Mode
While listening to a DAB service...
Searching for a Service by PTY Codes
Remote
ONLY
You can locate a particular kind of program from among all
the services you can receive by specifying PTY codes.
DISPLAY
MODE
Service label
Frequency
Ensemble ID
1 While listening to a DAB service...
BAND
PTY SEARCH
Clock*
S.TURBO
QP Link
PTY
DLS
Preset channel
number
BAND
S.TURBO
QP Link
Service
label
“NOSIGNAL” will appear if no signal is
sent.
2 Select a PTY code.
PTY
The broadcast program type is displayed.
“NONE” will appear if no signal is sent.
PRESET/GROUP/PTY
• For details about each PTY code,
see page 17.
DOWN
UP
DLS
Dynamic Label Segment (text messages
the station sends) is displayed.
“NO TEXT” will appear if no signal is
sent.
3 Start searching.
BAND
PTY SEARCH
* Non DAB signal.
S.TURBO
QP Link
BAND
S.TURBO
QP Link
Ex. When “NEWS” is selected
The receiver searches all the available ensembles, stops
when it finds a program of the selected PTY code, and
switches to that service.
• If no program is found, “NOTFOUND” appears on the
display.
• To stop searching any time during search, press
CANCEL.
To continue searching after it stops on an unwanted
service
While the PTY code is flashing on the display for 10
seconds, press PTY SEARCH again.
PTY SEARCH
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the PTY codes for DAB
Switching Temporarily to a Service of Your
NEWS:
AFFAIRS:
News.
Remote
ONLY
Topical program expanding or enlarging
upon the news—debate, or analysis.
Programs the purpose of which is to impart
advice in the widest sense.
Programs concerned with any aspect of
sports.
Choice Automatically
PTY Standby Reception function allows the System to
switch temporarily to a DAB service broadcasting a program
of your choice (TA, NEWS, or INFO).
• This function works while listening to a service providing
the required signals.
INFO:
SPORT:
EDUCATE:
DRAMA:
ARTS:
Educational programs.
All radio plays and serials.
Programs concerning any aspect of national
or regional culture, including language,
theater, etc.
• PTY Standby Reception works using both Dynamic PTY
and Static PTY.
SCIENCE:
TALK:
Programs about natural sciences and
technology.
Used for mainly speech-based programs
such as quizzes, panel games and
personality interviews.
Commercial music of current popular
appeal.
Rock music.
Current contemporary music considered to
be “easy-listening”.
Instrumental music, and vocal or choral
works.
While listening to a DAB service, select the program
type.
REPEAT
TA/News/Info
TA
NEWS
INFO
POP M:
OFF
(Canceled)
ROCK M:
EASY M:
TA
Traffic announcement in your area
See the right column.
CLASSICL:
NEWS
INFO
CLASSICM: Performances of major orchestral works,
symphonies, chamber music, etc.
OTHER M:
Music not fitting into any of the other
categories.
How PTY Standby Reception function works:
It works in the same way as the Enhanced Other Networks
function. See page 13.
WEATHER: Weather reports and forecasts.
FINANCE:
Stock Market reports, commerce, trading
etc.
CHILDREN: Programs targeted at a young audience.
FACTUAL:
Programs about sociology, history,
geography, psychology and society.
Religious programs.
Involving members of the public expressing
their views either by phone or at a public
forum.
RELIGION:
PHONE IN:
TRAVEL:
LEISURE:
JAZZ:
Travel information.
Programs about recreational activities.
Jazz music.
COUNTRY: Songs which originate from, or continue the
musical tradition of the American Southern
States.
NATION M: Current popular music of the nation or
region in that country’s language.
OLDIES:
Music from the so-called “golden age” of
popular music.
FOLK M:
Music which has its roots in the musical
culture of a particular nation.
DOCUMENT: Programs concerning factual matters,
presented in an investigative style.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Disc Operations
2 Select track numbers you want for Program Play.
Remote control
PRESET/GROUP/PTY
DOWN
UP
SET
ANT. P.
Increases the
track numbers.
Decreases the
track numbers.
SET/
ANT.P.
CANCEL
• For regular CDs
• For MP3 discs
CD 6
PRGM
PRGM
4,¢
MP
3
S.TURBO
S.TURBO
QP Link
QP Link
PRESET/GROUP/PTY
DOWN,UP
To select track numbers on an MP3 disc, enter the
number in three digits. Refer to the following examples:
When selecting track 24...
FM MODE/
PLAY MODE
REPEAT/
1 Press SET to skip the first digit.
2 Select “2” for the second digit pressing UP or DOWN
button repeatedly, then press SET.
3 Select “4” for the last digit pressing UP or DOWN
button repeatedly, then press SET.
TA/News/Info
Main unit
CD ‹/8
3 Start playback.
DOWN 4
7
0
The tracks you have selected are played
back in the order you have programmed.
¢ UP
To check the programmed contents
Programming the Playing Order—
Before playback or while playback is stopped...
Remote
ONLY
Program Play
In the programmed order.
In the reverse order.
You can arrange the playing order of the tracks (up to 99)
before you start playback.
1 Before starting playback, activate Program Play.
FM MODE/
To modify the program
Before playback or while playback is stopped...
PLAY MODE
PROGRAM RANDOM
Canceled
To erase the last track:
To erase the entire
program:
2 sec.
CANCEL
CANCEL
To add tracks in the program:
Repeat step 2.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
ONLY
To exit from Program Play
Playing Repeatedly—Repeat Play
You can repeat playback.
Before playback or while playback is stopped...
FM MODE/
PLAY MODE
PROGRAM RANDOM
While a regular CD is loaded...
Canceled
REPEAT
TA/News/Info
REP TRK
REP ALL
• Exiting from Program Play erases the stored program.
REP OFF
(Canceled)
While an MP3 disc is loaded...
Remote
ONLY
REPEAT
Playing at Random—Random Play
TA/News/Info
REP TRK
REP GRP
REP ALL
You can play all tracks at random.
REP OFF
(Canceled)
1 Before starting playback, activate Random Play.
FM MODE/
REP TRK
REP ALL
REP GRP
Repeats the current (or specified)
track—One Track Repeat.
PLAY MODE
PROGRAM
RANDOM
Canceled
Repeats the disc or all programmed
tracks—All Track Repeat.
RND
S.TURBO
Repeats the current group—One Group
Repeat (MP3 only).
QP Link
2 Start playback.
Playback starts in random order.
Random Play ends when all tracks have
been played.
Main Unit
ONLY
Prohibiting Disc Ejection—Child Lock
You can lock the disc tray so that no one can eject the loaded
disc.
• This is possible while the System is on standby.
To exit from Random Play
Before playback or while playback is stopped...
While on standby...
FM MODE/
PLAY MODE
PROGRAM RANDOM
Canceled
(hold then...)
To cancel the prohibition, repeat the same procedure.
“UNLOCKED” appears on the display.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Operations
1 Select one of the timer setting modes you want to set—
Remote control
Daily 1 ON time, Daily 2 ON time, or Daily 3 ON time.
STANDBY/ON
Daily Timer 1
Daily Timer 2
Daily Timer 3
CLOCK/
TIMER
DAILY 1 ON (Time) DAILY 2 ON (Time) DAILY 3 ON (Time)
Canceled
Clock setting
SET/
ANT.P.
(see page 11)
CLOCK/
TIMER
CANCEL
S.TURBO
QP Link
1
Ex. When Daily Timer 1 setting mode is selected
• When the clock has not been adjusted, pressing TIMER
makes the System enter the clock setting mode.
PRESET/GROUP/PTY
DOWN,UP
2 Make the Daily timer setting as you want.
1
Set the hour then the minute for on-time.
PRESET/GROUP/PTY
SET
Remote
ONLY
DOWN
UP
Setting the Timer
ANT. P.
Using Daily Timer, you can wake up with your favorite
music.
• You can store three Daily Timer settings; however, you can
activate only one timer at a time.
• To exit from the timer setting, press TIMER as required.
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
2
Select the playback source—“TUNER,” “CD,”
“DAB,” or “AUX.”
PRESET/GROUP/PTY
SET
DOWN
UP
ANT. P.
Daily Timer initial settings when shipped from the factory
• Daily 1: ON Time (6:00)/Source (TUNER)/
Volume level (8)
• Daily 2: ON Time (7:00)/Source (TUNER)/
Volume level (8)
S.TURBO
1
• Daily 3: ON Time (10:00)/Source (TUNER)/
Volume level (8)
QP Link
3
Select the volume level.
PRESET/GROUP/PTY
SET
ANT. P.
DOWN
UP
• You can select the volume level (“VOLUME 1” to
“VOLUME 40” and “VOLUME – –”). If you select
“VOLUME – –,” the volume is set to the last level
when the unit has been turned off.
Continued on the next page...
20
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Turn off the unit (on standby).
To turn off the Timer after its setting is done
Since Daily Timer is activated at the same time everyday,
you may need to cancel it on some particular days.
STANDBY/ON
1 Select the Timer you want to cancel.
Daily Timer 1
Daily Timer 2
Daily Timer 3
CLOCK/
TIMER
DAILY 1 ON (Time) DAILY 2 ON (Time)
DAILY 3 ON (Time)
Canceled
Clock setting
(see page 11)
How Daily Timer works
Once the Daily Timer has been set, the timer indicator
Ex. When Daily Timer 1
(
) and timer number indicator (1/2/3) are lit on the
S.TURBO
QP Link
display. Daily Timer is activated at the same time
everyday until the timer is turned off manually (see the
next column) or another Daily Timer is activated.
1
2 Turn off the selected Timer.
When the on-time comes
The System turns on, tunes in to the last received station/
service or start playing the loaded disc, and increases the
volume level gradually to the preset level.
CANCEL
About one hour after playback starts, the System stops
playback, and turns off (standby) automatically.
• The timer setting remains in memory until you change
it.
• Without canceling the Daily Timer, you can change the
source or adjust the volume after Daily Timer starts
playback.
To turn on the Timer again, repeat step 1 above and press
in step 2...
SET
ANT. P.
Timer Priority
If you set the Sleep Timer after Daily Timer starts playing
the selected source, Daily Timer is canceled.
6:00
6:30
7:00
7:30
Sleep Timer
Daily Timer
Canceled
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
• This System can recognize up to 999 tracks in a disc. Also,
the System can recognize up to 256 tracks per group and up
to 99 groups in a disc.
– Even if a folder contains no playable files, the folder is
also counted in the total folder number.
– Playable files which do not belong to any groups are
handled as Group 1.
Playing Back a Portable Audio Device:
• When QP Link fails due to a weak sound signal from the
AUX jack, Auto Standby may turn the System off even if
you can hear the sound from the speakers.
In such cases, adjust the volume level of the component
louder so that the System can detect the sound signal
properly.
Learning More about This System
Daily Operations—Playback (see pages 7 to 9)
Listening to the Radio:
• If you store a new station into an occupied preset number,
the previously stored station in that number will be erased.
• When you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If
this happens, preset the stations again.
Playing Back a Disc:
• When using an 8 cm disc, place it on the inner circle of the
disc tray.
• This System cannot play “packet write” discs.
• For MP3 playback...
• Changing from AUX to another source while QP Link
works will deactivate QP Link temporarily.
In this case, the following reactivate QP Link:
– Pressing QP LINK on the remote control
– Unplugging the component from the AUX jack, then
plugging it in again
– MP3 discs require a longer readout time than regular
CDs. (It depends on the complexity of the group/file
configuration.)
– Some MP3 files cannot be played back and will be
skipped. This results from their recording processes and
conditions.
– When making MP3 discs, use ISO 9660 Level 1 or Level
2 for the disc format.
– This System can play back MP3 files with the extension
code <.mp3> (regardless of the letter case—upper/
lower).
• If you press STANDBY/ON
to turn the System off or
if preset Timer turns the System off while QP Link works,
the System will deactivate QP Link temporarily.
In such cases, the following reactivate QP Link:
– When the sound signal from the AUX jack stops or is too
weak for about 30 seconds after the System is turned off
– When you turn on the power again
• QP Link may start working when you just plug in the
component to the AUX jack or unplug it. This is not a
malfunction.
– It is recommended that you make each MP3 file at a
sampling rate of 44.1 kHz and at a bit rate of 128 kbps.
This System cannot play back files made at a bit rate of
less than 64 kbps.
– Playback order of MP3 tracks may be different from
what you have intended when recording (see below). If a
folder does not include MP3 tracks, they are ignored.
– This System plays back MP3 tracks as follows.
Hierarchy
Daily Operations—Sound&Other Adjustments
(see pages 10 and 11)
Adjusting the Volume:
• Be sure to turn down the volume before connecting or
Level 1
Level 2
Level 3
Level 4
Level 5
putting on the headphones.
02
04
05
9
Adjusting the Sound:
• This function also affects the sound through the
headphones.
Setting the Clock:
3
7
8
ROOT
10
03
4
5
6
11
12
1
2
06
}
01
• “0:00” will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
Group with its play order
MP3 track with its play order
01
1
Radio Data System Operations (see pages 12
and 13)
• If the System takes time to show the Radio Data System
information—PS, PTY, RT signals, “PS,” “PTY,” or “RT”
will appear while searching.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DAB Operations (see pages 14 to 17)
Presetting Services:
Disc Operations:
The disc does not play.
• If you store a new service into an occupied preset number,
the previously stored service in that number will be erased.
• When you unplug the AC power cord or if a power failure
occurs, the preset services will be erased in a few days. If
this happens, preset the services again.
] The disc is placed upside down. Place the disc with the
label side up.
ID3 Tag on an MP3 disc cannot be shown.
] There are two types of ID3 Tag—Version 1 and Version
2. This System can only show ID3 Tag Version 1.
MP3 groups and tracks are not played back as you
expect.
] The playing order is determined when the disc was
recorded. It depends on the writing application.
The disc sound is discontinuous.
Changing the Display Mode:
• The time shown on the display is based on the built-in
clock of the System, not on the information sent through
DAB.
] The disc is scratched or dirty.
Advanced Disc Operations (see pages 18 and 19)
Programming the Playing Order—Program Play:
• You cannot specify a group number of an MP3 disc for
Program Play.
The disc tray does not open or close.
] The AC power cord is not plugged in.
] Child Lock is in use (see page 19).
• If you try to program the 100th track, “FULL” appears on
the display.
Timer Operations:
Daily Timer does not work.
] The System has been turned on when the on-time comes.
Timer Operations (see pages 20 and 21)
• When you unplug the AC power cord or if a power failure
occurs, the timer will be canceled. You need to set the
clock first, then the timer again.
Timer starts working only when the System is turned off.
Maintenance
To get the best performance of the System, keep your discs
and mechanism clean.
Troubleshooting
Handling discs
If you are having a problem with your System, check this list
for a possible solution before calling for service.
• When removing the disc from its case, hold it at the edge
while pressing the center hole lightly.
• Do not touch the shiny surface of the disc, or bend the disc.
• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc.
• Avoid exposure to direct sunlight, extreme temperature,
and moisture.
To clean the disc:
• Wipe the disc with a soft cloth in a straight line from center
to edge.
General:
Adjustments or settings are suddenly canceled before
you finish.
] There is a time limit. Repeat the procedure again.
Operations are disabled.
] The built-in microprocessor may malfunction due to
external electrical interference. Unplug the AC power
cord and then plug it back in.
Unable to operate the System from the remote control.
] The path between the remote control and the remote
sensor on the System is blocked.
Cleaning the System
• Stains should be wiped off with a soft cloth. If the System
is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe clean
with a dry cloth.
] The batteries are exhausted.
No sound is heard.
] Speaker connections are incorrect or loose.
] Headphones are connected.
• Since the System may deteriorate in quality, become
damaged or have its paint peeled off, be careful about the
following:
Radio Operations:
Hard to hear broadcasts because of noise.
] Antennas connections are incorrect or loose.
] The AM loop antenna is too close to the System.
] The FM antenna is not properly extended and positioned.
– DO NOT wipe it with a hard cloth.
– DO NOT wipe it forcefully.
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substance such as
insecticides to it.
DAB Operations:
Cannot receive an ensemble.
] Your area is not covered by the ensemble.
] The DAB antenna is not properly extended or positioned.
Adjust the antenna and try the ensemble scanning again.
] Connect an active antenna (not supplied).
– DO NOT allow any rubber or plastic to remain in contact
for a long time.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Parts Index
Refer to the pages to see how to use the buttons and controls.
Amplifier section
Output Power:
60 W (30 W + 30 W) at 6 Ω (10% THD)
Speakers/Impedance: 6 Ω – 16 Ω
Remote control
Audio Input
AUX: 500 mV/50 kΩ (at “AUX LVL 1”)
250 mV/50 kΩ (at “AUX LVL 2”)
125 mV/50 kΩ (at “AUX LVL 3”)
11
STANDBY ON
11
SLEEP A. STANDBY
Tuner section
FM tuning range: 87.50 MHz – 108.00 MHz
AM (MW) tuning range: 522 kHz – 1 629 kHz
DAB tuning range:
7, 21
CLOCK
TIMER
SET
8, 9, 11, 15,
18, 20, 21
9, 11, 18, 20, 21
ANT. P.
CANCEL
AUX
11, 20, 21
9
7, 11
QP LINK
DAB
DIMMER
7, 8, 9, 14, 18, 19
CD
FM AM
Band III: 174.928 MHz – 239.200 MHz
L-Band: 1 452.960 MHz – 1 490.624 MHz
PTY SEARCH
8, 9, 12, 16
8, 9, 14, 18
PRESET GROUP PTY
NUMBER
SELECT
DOWN
UP
CD player section
Dynamic range: 88 dB
Signal-to-noise ratio: 93 dB
Wow and flutter: Immeasurable
9
13, 17, 19
11, 12, 16
8, 9, 11, 12, 15,
16, 18, 20
8, 18, 19
10
DISPLAY REPEAT
FM MODE
MODE TA News Info PLAY MODE
SOUND
TURBO
BASS
AHB PRO TREBLE
10
10
FADE
MUTING
10
7, 10
VOLUME
Speakers
Speaker units: 10 cm cone x 1 + 1.5 cm dome x 1
Impedance: 6 Ω
Dimensions (approx.): 140 mm x 231 mm x 195 mm
(W/H/D)
Mass (approx.): 1.7 kg each
Supplied Accessories
See page 3.
General
Main unit
Remote
sensor
Power requirement: AC 230 V
, 50 Hz
Power consumption: 60 W (at operation)
11 W (on standby/display on)
0.95 W (on standby/display off)
Dimensions (approx.): 165 mm x 231 mm x 328 mm
(W/H/D)
Mass (approx.): 4.1 kg
6
7
STANDBY
10
SOUND
TURBO
DIMMER
7, 11
VOLUME
7, 8,
14, 18
DAB/
CD
AUX
FM/AM
7, 10
8, 19
DOWN
UP
8, 9, 14,
18, 19
AUX
PHONES
5
7
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”
This equipment has been designed and manufactured to meet international safety standards but, like any
electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮
Do read the operating instructions before you attempt to use the equipment.
Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between
pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and
withdraw the mains plug when making or changing connections.
Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
Do be careful with glass panels or doors on equipment.
✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in
any way—switch off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for
unattended operation or has a standby mode.
Switch off using the switch on the equipment and make sure that your family know how to do this.
Special arrangements may need to be made for infirm or handicapped people.
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of
traffic safety. It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume as such use can permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.
Overheating will cause damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood screws—to ensure complete safety always fit the
manufacturer’s approved stand or legs with the fixings provided according to the instructions.
DON’T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
–
–
NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case
—this could result in a fatal electrical shock.;
NEVER guess or take chances with electrical equipment of any kind—it is better to be safe than sorry!
EN
© 2006 Victor Company of Japan, Limited
0506WMKMDCJEM
Download from Www.Somanuals.com. All Manuals Search And Download.
|