JVC DVD Player XV 421BK User Manual

DVD VIDEO PLAYER

Introduction

XV-521BK/XV-523GD/XV-525BK

XV-421BK

Preliminary knowledge

Getting started

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

XV-521BK/XV-523GD/XV-525BK models

SHIFT

PLAY

SHUTTLE

OPEN/CLOSE

DVD PLAYER

PLAY

STOP

POWER

STANDBY

STOP

^PA8^USE

LEFT CURSOR RIGHT

DOWN

Basic operations

Advanced operations

Initial settings

TITLE CHAP.

RESUME THEATER

3D PHONIC

SKIP

DOLBY

EACH

REMOTE CONTROL

DVD/VDEO CD/CD

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

XV-421BK model

SHIFT

PLAY

OPEN/CLOSE

XV-421 DVD PLAYER

PLAY

STOP

POWER

STANDBY

STOP

^PA8^USE

LEFT CURSOR RIGHT

DOWN

TITLE CHAP.

RESUME THEATER

3D PHONIC

SKIP

EACH

DOLBY

RM-SXV521J REMOTE CONTROL

DVD/VDEO CD/CD

Additional information

INSTRUCTIONS

For Customer Use:

Enter below the Model No. and Serial No.

which are located on the rear, bottom or

side of the cabinet. Retain this informa-

tion for future reference.

Model No.

Serial No.

LVT0435-001A

[J]

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Table of contents

To locate a desired selection using 4 or ¢ ...... 21

To locate a desired scene by specifying the chapter

number [CHAP. SEARCH] ....................................... 22

To locate a desired position in the current title or

track [TIME SEARCH].............................................. 22

To locate a desired scene from the digest display

[DIGEST] .................................................................. 23

Special picture playback

To advance a still picture frame-by-frame.............. 24

To display still pictures [STROBE] ........................... 24

To playback in slow-motion [SLOW]....................... 25

To zoom a scene [ZOOM] ......................................... 26

Changing the playback order

Page 1

Introduction

Features ....................................................................1

Supplied accessories ............................................... 1

About this instruction manual ............................... 2

Notes on handling ................................................... 3

Page 4

Preliminary knowledge

Names of parts and controls

Front panel ................................................................... 4

Remote control unit .................................................... 5

Display window ........................................................... 7

Rear panel .................................................................... 7

Operational Principles

To playback in the desired order [PROGRAM] ....... 26

To playback in random order [RANDOM]............... 27

Repeat playback

On-screen displays...................................................... 8

To prevent the monitor from burning out

To repeat the current selection

[SCREEN SAVER] ...................................................... 9

On-screen guide icons .............................................. 10

How to use numeric buttons.................................... 10

About discs

or all disc contents [REPEAT] ................................ 28

To repeat a desired part [A-B REPEAT] ................... 29

Selecting a scene angle of DVD VIDEO

To select a scene angle from the normal screen

[ANGLE] ................................................................... 30

To select a scene angle from the angle list display

[ANGLE] ................................................................... 30

Changing the language and sound

To select the subtitle language [SUBTITLE] ........... 31

To change the audio language or sound [AUDIO]. 31

Selecting the picture character

To select the picture character

[THEATER POSITION] ............................................. 32

Enjoying virtual surround sound

To simulate surround sound [3D PHONIC] ............. 32

Checking the status

Playable disc types.................................................... 11

Disc structure............................................................. 11

Page 12

Getting started

Connections

Before making any connections .............................. 12

To connect to a TV..................................................... 12

To connect to a TV with the component video

input jacks................................................................ 13

To connect to an audio amplifier or receiver ......... 13

To connect to audio equipment with a digital

input ......................................................................... 14

To connect the power cord....................................... 14

Using the remote control unit

To check the disc/time information ......................... 33

To check the DVD function status ............................ 34

To install batteries in the remote control unit........ 15

To use the remote control unit for TV operation ... 16

To control the volume of a JVC’s amplifier or

receiver .................................................................... 16

Page 35

Initial settings

Selecting preferences

How to set preferences............................................. 35

LANGUAGE page ...................................................... 35

AUDIO page ............................................................... 36

DISPLAY page............................................................ 37

SYSTEM page ............................................................ 38

Limiting playback by children

Page 17

Basic operations

Turning on/off the unit.......................................... 17

Inserting and removing discs ............................... 17

Basic playback

To set Parental Lock for the first time

To start playback ....................................................... 18

To stop playback completely ................................... 18

To stop playback temporarily .................................. 18

To advance or reverse playback rapidly while

monitoring ............................................................... 18

To locate the beginning of the scene or song ........ 19

To resume playback

[PARENTAL LOCK] .................................................. 39

To change the settings [PARENTAL LOCK]............. 40

To temporarily release the Parental lock

[PARENTAL LOCK] .................................................. 40

Page 41

Additional information

AV COMPU LINK remote control system

(not available with XV-421BK)

To memorize the interrupted position .................... 19

To resume playback .................................................. 19

Connection and setup............................................... 41

Operation ................................................................... 42

Care and handling of discs.................................... 42

Troubleshooting ..................................................... 43

Specifications ......................................................... 44

Page 20

Advanced operations

Playing from a specific position on a disc

To locate a desired scene from the DVD menu...... 20

To locate a desired scene from the menu of the

Video CD with PBC.................................................. 20

To locate a desired selection using the numeric

buttons ..................................................................... 21

Table of languages and their

abbreviations ....................................... Appendix A

Country code list for parental lock ...... Appendix B

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Features

Supplied accessories

Picture functions

• Audio/video cable (x 1)

7 Strobe function

The unit can display nine continuous still pictures on

the TV screen.

7 Digest function

You can select the desired title from the opening

scenes displayed on the TV screen.

• S-video cable (x 1)

7 Angle function*

You can select a desired angle from multiple camera

angles recorded on the DVD VIDEO disc.

7 Zoom function

• AV compulink cord (x 1)

(except XV-421BK)

You can view scenes close-up.

7 Parental lock*

You can restrict the playback of DVD VIDEO discs with

scenes which you do not want children to see, such

as adult or violent films.

7 Theater position

You can select the picture character according to the

lighting of your room.

• Remote Control Unit (x 1)

OPEN

/CLOSE

SUBTITLE

3D-PHONIC

DIGEST

THEATER

POSITION

AUDIO

STROBE

TV POWER

DVD POWER

ANGLE

ZOOM

TV/VIDEO

10 ^TV

TV RETURN

SLOW

AMP

VOL

Audio functions

+10

SHIFT

PLAY MODE

VOL

100+

B.SEARCH

CANCEL

B.SKIP

DISPLAY

PAUSE

PLAY

TIME

RETURN

_F.SEARCHCHOICE

F.SKIP

STOP

TITLE

LEFT

ENTER

CURSOR

DOWN

RM-SXV521J REMOTE CONTROL

RIGHT

7 High quality digital sound

You can enjoy high quality sound with Dolby Digital

or Linear-PCM.

7 Surround function*

The unit is compatible with Dolby Digital surround and

DTS surround.

• R6P(SUM-3)/AA(15F) batteries (x 2)

• Instruction manual (x 1)

(DTS surround is available for digital output only.)

7 3D Phonic function

You can enjoy surround sound with your 2-channel

system.

Other functions

7 Multi-language subtitles and sound*

You can select a subtitle or sound language from those

recorded on the DVD VIDEO disc.

7 Multi-disc playback

You can enjoy Audio CD discs and Video CD discs, as

well as DVD VIDEO discs.

• AC power cord (x 1)

7 Operation from the on-screen display

User-friendly on-screen displays allow you to operate

the unit easily.

Functions with (*) mark only work on a DVD VIDEO disc

that is compatible with each function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

About this instruction manual

This instruction manual basically explains operations as follows:

To playback in random order [RANDOM]

These symbols

indicate the types of

discs which the

operation can be

used for.

You can play titles or tracks in random order by using

the Random function.

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

STOP

The number

indicates the

following procedural

step(s) in which the

button(s) is(are)

used.

LEFT

CURSOR RIGHT

DOWN

REMOTE CONTROL

While stopped

You may also use the

corresponding

buttons on the front

panel of the unit if

available.

The number

indicates the

procedural step.

Press PLAY MODE - CANCEL.

The play mode menu appears on the TV screen.

Use CURSOR 2/3 to move

[RANDOM].

REPEAT

PROGRAM

RANDOM

The “RANDOM” indicator appears in the display

window on the front panel.

The names of

buttons on the

Press ENTER.

The unit starts random playback.

remote control unit

(or on the front panel

of the unit) are all

given in uppercase

letters.

After playing all titles/tracks of the disc, random

playback ends.

Other convenient

procedures, etc.

The same title or track will not be played back more than once

during random play.

• To stop/quit random playback in the middle

Press STOP to stop playback. The unit is still in

random playback mode, so pressing PLAY starts

random playback again.

To quit random playback, press STOP again while

stopped. The “RANDOM” indicator in the display

window turns off.

NOTE

Additional

supplemental

remarks

Some DVD VIDEO discs may not be played back correctly

in random mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Notes on handling

Important cautions

Safety precautions

Installation of the unit

Avoid moisture, water and dust

• Select a place which is level, dry and neither too hot

nor too cold (between 5˚C and 35˚C, 41˚F and 95˚F).

• Leave sufficient distance between the unit and the TV.

• Do not use the player in a place subject to vibrations.

Do not place the unit in moist or dusty places.

Avoid high temperatures

Do not expose the unit to direct sunlight or place it

near a heating device.

Power cord

• Do not handle the power cord with wet hands!

• A small amount of power (3.0 watts) is always

consumed while the power cord is connected to the

wall outlet.

When you’re away

When away on travel or otherwise for an extended

period of time, remove the plug from the wall outlet.

• When unplugging the player from the wall outlet,

always pull the plug, not the power cord.

Do not insert foreign objects into the unit

Do not insert wires, hairpins, coins, etc. into the unit.

To prevent malfunction of the unit

Do not block the vents

• There are no user-serviceable parts inside. If

anything goes wrong, unplug the power cord and

consult your dealer.

• Do not insert any metallic object into the unit.

• Do not use any non-standard shape disc available on

the market, because it may damage the unit.

• Do not use a disc with tape, seals, or paste on it,

because damage to the unit may result.

Blocking the vents may damage the unit.

Care of the cabinet

When cleaning the unit, use a soft cloth and follow the

relevant instructions on the use of chemically-coated

cloths. Do not use benzene, thinner or other organic

solvents and disinfectants. These may cause

deformation or discoloring.

Note about copyright laws

If water gets inside the unit

• Please check the copyright laws in your country

before recording from DVD VIDEO, Audio CD, and

Video CD discs. Recording of copyrighted material

may infringe copyright laws.

Turn off the power switch and remove the plug from

the wall outlet, then call the store where you made

your purchase. Using the unit in this state may cause a

fire or electrical shock.

Note about the copyguard system

• The DVD VIDEO disc is protected by the copyguard

system. When you connect the unit to your VCR

directly, the copyguard system activates and the

picture may not be played back correctly.

This product incorporates copyright protection technology that is protected by method claims of certain U.S.

patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of

this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home

and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering

or disassembly is prohibited.

Manufactured under license from Dolby Laboratories. “Dolby” and double-D symbol are trademarks of Dolby

Laboratories.

Confidential Unpublished Works.

Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents

issued and pending. “DTS”, “DTS Digital Surround”, are trademarks of Digital Theater Systems, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preliminary knowledge

Names of parts and controls

Refer to the corresponding pages indicated in () for details.

Front panel

(For XV-521BK/523GD/525BK)

5 0 (OPEN/CLOSE) button

6 7 (STOP) button

7 # (PLAY) button

1 POWER button

2 STANDBY indicator

3 Remote sensor

4 Disc tray

8 8 (PAUSE) button

= SHUTTLE knob

SHUTTLE

OPEN/CLOSE

DVD PLAYER

PLAY

POWER

STANDBY

STOP

^PA8^USE

TITLE CHAP.

RESUME THEATER

3D PHONIC

SKIP

DOLBY

EACH

DVD/VDEO CD/CD

0 Display window

- 4/¢ (SKIP) buttons

9 3D PHONIC button

(For XV-421BK)

5 0 (OPEN/CLOSE) button

6 7 (STOP) button

1 POWER button

2 STANDBY indicator

3 Remote sensor

7 # (PLAY) button

4 Disc tray

8 8 (PAUSE) button

~ SEARCH buttton

OPEN/CLOSE

XV-421 DVD PLAYER

PLAY

POWER

STANDBY

STOP

^PA8^USE

TITLE CHAP.

RESUME THEATER

3D PHONIC

SKIP

EACH

DOLBY

DVD/VDEO CD/CD

9 3D PHONIC button 0 Display window

- 4/¢ (SKIP) buttons

1 POWER button (17)

9 3D PHONIC button (32)

Turns the unit on or off (standby).

Produces a simulated surround effect.

2 STANDBY indicator

0 Display window

Lights when the power cord is connected and the unit is

on standby. When the unit is turned on, the STANDBY

indicator goes off.

Indicates the current status of the unit.

- 4/¢ (SKIP) buttons (19, 21)

Used to skip a chapter, title or track.

3 Remote sensor

Also, used for the page selection of a menu screen (for

DVD VIDEO/Video CD).

Receives the signal from the remote control unit.

Holding down 4 or ¢ during playback reverses or

4 Disc tray (17)

advances playback rapidly.

Used to load a disc.

= SHUTTLE knob (19, 25) (for XV-521BK/XV-523GD/

5 0 (OPEN/CLOSE) button (17)

XV-525BK)

Used to open and close the disc tray.

Performs rapid advance/reverse playback operations.

Also used for slow-motion playback of a picture (for DVD

VIDEO/Video CD).

6 7 (STOP) button (18)

Stops playback.

Also used to erase all programmed tracks for the program

play.

~ 1/¡ (SEARCH) button (19, 25) (XV-421BK only)

Pressing 4 or ¢ during playback reverses or advances

playback rapidly. Each press of the button during rapid

playback increases the playback speed.

7 # (PLAY) button (18)

Starts playback. Also, used as a SELECT button for the PBC

of Video CDs.

Also used for slow-motion playback of a picture (for DVD

VIDEO/Video CD).

8 8 (PAUSE) button (18)

Pauses playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preliminary knowledge

Remote control unit

! Infrared signal-emitting window

1 3D PHONIC button

@ THEATER POSITION button

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

2 OPEN/CLOSE button

# DVD POWER - TV POWER button

SUBTITLE AUDIO

ANGLE TV/VIDEO

ZOOM

3 SUBTITLE - DIGEST button

4 AUDIO - STROBE button

$ TV/VIDEO button

% ANGLE - ZOOM button

DIGEST

STROBE

TV 1

TV 2

TV 3

TV 4

TV 5

TV 6

5 Numeric buttons

6 SLOW button

TV 7

TV 8

TV 9

+10

TV RETURN

TV 0

TV 100 +

^ TV ch button

AMP

VOL

SLOW

7 AMP VOL button

8 SHIFT button

& TV VOL button

* RETURN - CHOICE button

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

9 PLAY MODE - CANCEL button

4(B.SKIP) - B. SEARCH button

( DISPLAY - TIME button

^P3^LAY

) ¢ (F.SKIP) - F. SEARCH button

_ 3 (PLAY) button

+ ENTER button

¡ 7 (STOP) button

™ MENU button

STOP

8(PAUSE) button

= TITLE button

LEFT CURSOR RIGHT

DOWN

~ CURSOR (5 UP, ∞ DOWN,

LEFT, RIGHT) button

REMOTE CONTROL

Download from Www.Somanuals.com. All Manuals Search And Download.

Preliminary knowledge

1 3D PHONIC button (32)

! Infrared signal-emitting window

Produces a simulated surround effect.

Point this window toward the remote sensor on the front

panel when pressing buttons.

2 OPEN/CLOSE button (17)

@ THEATER POSITION button (32)

Opens and closes the disc tray.

Selects a picture character from 4 options (for DVD VIDEO/

Video CD).

3 SUBTITLE - DIGEST button (23, 31)

Used to display the subtitle selection display on the TV

screen, as well as used to turn the subtitle on or off (for

DVD VIDEO).

Pressing this button while holding down the SHIFT button

displays beginning scenes of each title, chapter or track on

the TV screen (for DVD VIDEO/Video CD).

# DVD POWER - TV POWER button (17)

Turns the unit on or off (standby). Pressing this button while

holding down the SHIFT button turns the TV on or off.

$ TV/VIDEO button (16)

Switches the TV input mode.

4 AUDIO - STROBE button (24, 31)

% ANGLE - ZOOM button (26, 30)

Selects the audio (for DVD VIDEO/Video CD). Pressing this

button while holding down the SHIFT button displays nine

continuous still pictures (for DVD VIDEO/Video CD).

Changes camera angles during playback of a DVD VIDEO

disc containing multiple camera angles. Pressing this

button while holding down the SHIFT button zooms in the

picture (for DVD VIDEO/Video CD).

5 Numeric buttons (10, 16)

Used to select a title or track number, as well as used to

enter a time for the Time search and a chapter number for

the Chapter search.

^ TV ch button (16)

Changes the TV channels.

Also used to select a TV channel in conjunction with the

SHIFT button.

& TV VOL button (16)

Adjusts the TV volume.

6 SLOW button (25)

* RETURN - CHOICE button (20, 35)

Used for slow-motion playback of a picture (for DVD VIDEO/

Video CD).

Returns to the previous menu (for DVD VIDEO/Video CD).

Pressing this button while holding down the SHIFT button

displays Preference on-screen display on the TV screen.

7 AMP VOL button (16)

Used to control the volume of a JVC audio amplifier/

( DISPLAY - TIME button (33, 34)

receiver.

Displays the status information (only for DVD disc) or the

time information (for any disc types). When the time

information appears, pressing this button while holding

the SHIFT button changes the time mode.

8 SHIFT button

Used together with other buttons for activating their second

functions.

) ¢ (F.SKIP) - F. SEARCH button (19, 21, 23)

9 PLAY MODE - CANCEL button (27)

Skips forward a chapter, title or track. Also used for the

page selection of a menu screen (for DVD VIDEO/Video CD).

Holding down this button during playback advances

playback rapidly.

Displays an on-screen display for controlling the advanced

playback functions. Pressing this button while holding

down the SHIFT button cancels the last selection of the

program.

Pressing the button while holding down the SHIFT button

during playback also advances playback rapidly. If you

press the button while holding down the SHIFT button

during rapid advance playback, the speed increases.

0 4 (B.SKIP) - B. SEARCH button (19, 21, 23)

Skips back a chapter, title or track. Also used for the page

selection of a menu screen (for DVD VIDEO/Video CD).

Holding down this button during playback reverses

playback rapidly.

_ 3 (PLAY) button (18)

Starts playback. Also used as a SELECT button for PBC of

Video CDs.

Pressing the button while holding down the SHIFT button

during playback also reverses playback rapidly. If you press

the button while holding down the SHIFT button during

rapid reverse playback, the speed increases.

+ ENTER button

Executes the selected item in a menu or on-screen display.

- 8 (PAUSE) button (18)

¡ 7 (STOP) button (18)

Pauses playback.

Stops playback.

Also used to erase all the programmed tracks for the

program play.

= TITLE button (20)

Displays the title menu of a DVD VIDEO disc on the TV

screen.

™ MENU button (20)

Displays a DVD menu on the TV screen.

~ CURSOR (5 UP, ∞ DOWN,

LEFT,

RIGHT) buttons

Used to select an item form a menu or on-screen display,

or to change the setting of an item in the on-screen display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preliminary knowledge

Display window

3 Disc indicator

4 Function indicator

1 Title/chapter/track indicator

Displays title/chapter, or track number.

2 Time display

3D-PHONIC

PROGRAM RANDOM REPEAT 1A-B

RESUME THEATER

DVD VCD

Shows the cumulative or remaining time of the track or

disc, or the total disc time.

TITLE CHAP.

TRACK

EACH

REMAIN

3 Disc indicator

Indicates the type of the disc set in the tray. When a DVD

VIDEO or Video CD disc is set, “DVD” or “VCD” is indicated.

When an Audio CD is set, there is no indication.

2 Time display

4 Function indicator

1 Title/chapter/track indicator

Activated function indicators light up.

Rear panel

(For XV-521BK/523GD/525BK)

6 DIGITAL OUT jacks (OPTICAL/COAXIAL)

7 COMPONENT VIDEO OUT jacks (Y/PB/PR)

DIGITAL OUT

PCM/STREAM

COAXIAL

VIDEO OUT

COMPONENT

AC IN

AV COMPU LINK

OPTICAL

S-VIDEO VIDEO

AUDIO OUT

3 AUDIO OUT jacks

(LEFT/RIGHT)

4 AV COMPU LINK jacks

AC IN connector

2 VIDEO OUT jack

1 S-VIDEO OUT jack

(For XV-421BK)

6 DIGITAL OUT jack (COAXIAL)

7 COMPONENT VIDEO OUT jacks (Y/PB/PR)

DIGITAL OUT

PCM/STREAM

VIDEO OUT

COMPONENT

AC IN

COAXIAL

P^R

VIDEO OUT

S-VIDEO VIDEO

AUDIO OUT

3 AUDIO OUT jacks (LEFT/RIGHT)

AC IN connector

2 VIDEO OUT jack

1 S-VIDEO OUT jack

1 S-VIDEO OUT jack (12)

AC IN connector (14)

Connects to the wall outlet using the supplied AC power

cord.

Outputs an S-video signal.

2 VIDEO OUT jack (12)

6 DIGITAL OUT jacks (14)

Outputs a composite video signal.

Output digital audio signals. You must select the signal type

correctly according to the external device connected to via

the Preference display. The XV-521BK/523GD/525BK

provides both the OPTICAL and COAXIAL connectors, while

XV-421BK provides only the COAXIAL connector.

3 AUDIO OUT jacks (L/R) (12)

Output stereo analog audio signals.

4 AV COMPU LINK jacks (41) (except XV-421BK)

Connect with other JVC equipment supporting the AV

Compulink function to facilitate integrated operations.

7 COMPONENT VIDEO OUT jacks (Y/PB/PR) (13)

Output component video signals.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preliminary knowledge

Operational Principles

On-screen displays

The unit provides several on-screen displays.

With some displays, you can set or select preferences

or functions, while the others are display-only.

Opening displays

Opening display

The Opening display appears automatically in some

conditions.

At the bottom, the following information are indicated

depending on the unit’s status.

•

NOW READING: The unit is now reading the disc

information (TOC).

•

REGION CODE ERROR!: The DVD VIDEO disc loaded

cannot be played because the region code of the

disc does not match the unit.

NOW READING

•

OPEN: The disc tray is now opening.

CLOSE: The disc tray is now closing.

Preference displays

LANGUAGE

AUDIO

When the unit is stopped, pressing the RETURN-

CHOICE button while holding the SHIFT button

accesses the preference display for setting the

preferences.

There are four pages: LANGUAGE, AUDIO, DISPLAY

and SYSTEM as shown in the right.

AUDIO

DISPLAY

SYSTEM

AUDIO

DISPLAY

SYSTEM

LANGUAGE

DOLBY

ENGLISH

_DIGITAL/PCM

Lo / Ro

MENU LANGUAGE

DIGITAL AUDIO OUTPUT

DOWN MIX

ENGLISH

AUDIO LANGUAGE

SUBTITLE

COMPRESSION

ON SCREEN LANGUAGE

EXIT

PRESS

KEY

PRESS

KEY

See page 35 for detailed information.

DISPLAY

SYSTEM

AUDIO

DISPLAY

SYSTEM

AUDIO

DISPLAY

SYSTEM

LANGUAGE

4:3 LB

OFF

MONITOR TYPE

AUTO STANDBY

RESUME

SCREEN SAVER

DVD 1

ON SCREEN GUIDE

AV COMPULINK MODE

EXIT

PRESS

KEY

PRESS

KEY

* The “AV COMPULINK

MODE” selection is not

available with the XV-

421BK.

PARENTAL LOCK displays

PARENTAL LOCK

When no disc is inserted or a DVD VIDEO disc is

stopped, pressing the ENTER button while holding

down the SHIFT button accesses the PARENTAL LOCK

display in which you can set the level for limiting

playback.

PARENTAL LOCK

—

Country Code

Set Level

----

PASS WORD

EXIT

See page 39 for detailed information.

PRESS

KEY

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Preliminary knowledge

Play mode displays

While stopped

During DVD VIDEO playback

Pressing the PLAY MODE button accesses the play

mode display in which you can control playback

functions.

DVD CONTROL

REPEAT

PROGRAM

RANDOM

REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH

Different displays appear depending on the disc type

and the unit’s status.

During Audio CD playback

During Video CD playback

CD CONTROL

VCD CONTROL

REPEAT A-B REPEAT TIME SEARCH

REPEAT A-B REPEAT TIME SEARCH PBC CALL

Status displays

DVD VIDEO function status

Disc/time (DVD VIDEO )

Pressing the DISPLAY-TIME button during playback

accesses the status display.

For a DVD VIDEO disc, pressing the DISPLAY-TIME

button toggles between the DVD VIDEO function status

display, and the disc/time display and off.

1 / 2

Mbps

TITLE

CHAP.

TIME

2:25:25

BITRATE

3.3

ENGLISH ENGLISH

For a Video CD or Audio CD disc, pressing the DISPLAY-

TIME button switches the disc/time display on and off.

Disc/time (Audio CD/Video CD Disc/time

without PBC)

(Video CD with PBC)

EACH

REMAIN

_TRACK1_TIME00:08

TRACK

TIME

25:25 PBC

To prevent the monitor from burning out [SCREEN SAVER]

A television monitor screen may be burned out if a

static picture is displayed for a long time. To prevent

this, the unit automatically activates the screen saver

function if a static picture, such as an on-screen display

or menu, is displayed for over 5 minutes.

DVD/Video CD/CD PLAYER

•

Pressing any button on the unit or the remote

control unit will release the screen saver function

and return to the previous display.

•

You can select one of several screen saver modes

available (see page 37).

The screen saver function is not activated during

Audio CD playback or after stopping Audio CD

playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preliminary knowledge

On-screen guide icons

During DVD playback, you may see icons displayed over the picture. These

have the following meanings.

: Displayed at the beginning of a scene recorded from multiple angles. (See

page 30.)

: Displayed at the beginning of a scene recorded with multiple audio

languages. (See page 31.)

: Displayed at the beginning of a scene recorded with multiple subtitle

languages. (See page 31.)

You can set the unit not to display on-screen icons above via the preference

settings described on page 38.

About invalid operation icon

When you press a button, if the unit does not accept its operation,

appears

on your television screen. Operations are occasionally unacceptable even if

is not displayed.

Note that some operations may not be accepted. For example, some discs

may not allow rapid advance/reverse or slow-motion playback.

How to use numeric buttons

To select a track/title number

•

To select a number between 1 and 10

TV 1

TV 2

TV 3

Press the corresponding button for the number.

TV 4

TV 5

TV 6

•

To select a number higher than 10

Use the +10 button.

TV 7

TV 8

TV 9

+10

Examples:

TV RETURN

TV 0

TV 100+

To select 13

To select 34

To select 40

+10 → 3

+10 → +10 → +10 → 4

+10 → +10 → +10 → 10

To enter a time or chapter number

The method for entering a time for Time search or chapter number for Chapter

search is different from above. See the corresponding sections in this manual

for the details.

To select a TV channel.

Press the corresponding numeric buttons (between 0 and 9) while holding

down the SHIFT button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preliminary knowledge

About discs

Playable disc types

Playable and non-playable disc types are as follows:

Playable discs

DVD VIDEO

Video CD

Audio CD

CD-R

CD-RW

The DVD VIDEO Logo is a trademark.

• CD-R and CD-RW discs recorded with the audio CD format can be played back, though some may not be played

back because of the disc characteristics or recording condition.

• DVD VIDEO players and DVD VIDEO discs have their own Region Code numbers. This unit only can play back DVD

VIDEO discs whose Region Code numbers include “1”.

Examples of playable DVD VIDEO discs:

1 2

3 4

ALL

1 2

This unit accommodates the NTSC television system and can playback discs recorded with the NTSC system. Note

that the unit cannot playback discs recorded with the PAL system.

Non-playable discs

DVD-ROM, DVD-RAM, DVD AUDIO, DVD-R, DVD-RW, CD-ROM, PHOTO CD, CD-EXTRA, CD-G, CD-TEXT

• Playing back discs listed as “Non-playable discs” above may generate noise and damage speakers.

• This unit can play back audio recorded in CD-G, CD-EXTRA and CD-TEXT discs.

Disc structure

A DVD VIDEO disc is comprised of “titles,” while an Audio CD, Video CD is comprised of “tracks.” Each title may be

divided into some “chapters.” For example, if a DVD VIDEO disc contains some movies, each movie may have its own

title number, and each movie may be divided into some chapters. In a DVD VIDEO karaoke disc, each song usually has

its own title number and does not have chapters. In general, each title has independent content, while each chapter in

the same title has continuity.

(Example: DVD VIDEO disc)

Title 1

Title 2

Chapter 1

Chapter 2

Chapter 3

Chapter 1

Chapter 2

(Example: Audio CD/Video CD)

Track 1 Track 2

Track 3

Track 4

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

Connections

*In the following description, “TV” may be substituted with “monitor” or “projector.”

*Before using the unit, you have to connect the unit to a TV and/or amplifier.

*In the following connection examples, the rear panel drawing of the unit is based on XV-521BK/523GD/525BK. The

XV-421BK rear panel looks different.

Before making any connections

• Do not connect the AC power cord until all other connections have been made.

• Since different components often have different terminal names, carefully read the instructions supplied with the

component you are going to connect.

To connect to a TV

You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio

outputs to your separate audio equipment. (See the following pages.)

* If the TV has an AV COMPU LINK terminal,

you can use the AV COMPU LINK function

(except XV-421BK).

See “AV COMPU LINK remote control

system” on page 41 for details.

The unit

DIGITAL OUT

PCM/STREAM

COAXIAL

VIDEO OUT

COMPONENT

S-video cable

(supplied)

AV COMPU LINK

OPTICAL

S-VIDEO VIDEO

AUDIO OUT

Yellow

White

S-VIDEO

VIDEO

LEFT

Yellow

White

Red

AUDIO

RIGHT

Red

Audio/video cable

(supplied)

: except XV-421BK

Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video

cables.

• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts

stereo audio output to monaural.

• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the supplied S-

video cable in addition to the (standard) video connection to get better picture quality.

NOTES

• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may

cause a monitor problem when playing back a copy-protected disc.

• Connect the unit to an NTSC television. Do not connect the unit to a PAL television.

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

To connect to a TV with the component video input jacks

You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT

VIDEO IN jacks of your TV with the video cables.

Green

Blue

Component video

cable (not supplied)

Red

The unit

DIGITAL OUT

PCM/STREAM

COAXIAL

VIDEO OUT

COMPONENT

S-video cable

(supplied)

Blue

Red

AV COMPU LINK

P^R

OPTICAL

Green

S-VIDEO VIDEO

AUDIO OUT

Red

White

S-VIDEO

VIDEO

White

Red

LEFT

AUDIO

RIGHT

: except XV-421BK

Audio cable

(not supplied)

• Connect “Y” to “Y,” “PB” to ”PB,” and “PR” to “PR” correctly.

NOTES

• When the component video input jacks of the TV are of the BNC type, use an adapter to convert the pin jacks to BNC jacks

(optional).

• If you do not connect the unit with the S-video cable, some functions of your TV may not work.

• Connect the unit to an NTSC television. Do not connect the unit to a PAL television.

To connect to an audio amplifier or receiver

You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.

The unit

: except XV-421BK

DIGITAL OUT

PCM/STREAM

COAXIAL

VIDEO OUT

COMPONENT

AV COMPU LINK

P^R

OPTICAL

S-VIDEO VIDEO

AUDIO OUT

Amplifier or receiver

Red

White

Red

LEFT

AUDIO

RIGHT

Audio cable

(not supplied)

• Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or

receiver.

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

To connect to audio equipment with a digital input

You can enhance the sound quality by connecting the unit’s DIGITAL OUT to the digital input of an amplifier, DAT or

MD by using an optional digital cable (the XV-521BK/523GD/525BK provides both the optical and coaxial jacks while

the XV-421BK only provides the coaxial jack). The digital audio signal from a disc is directly transferred. If you

connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital

cable, you can enjoy high-quality surround sound.

When you make the digital connection, also make the analog connection, because, depending on the disc type, no

audio may be reproduced from the DIGITAL OUT.

For XV-521BK/523GD/525BK

When using the DIGITAL OUT (OPTICAL) jack, remove

the protection cap. Do not lose the removed cap.

When the DIGITAL OUT (OPTICAL) jack is not used, fix

the protection cap into the jack.

Optical digital cable

(not supplied)

Coaxial digital cable

(not supplied)

The unit

: except XV-421BK

DIGITAL OUT

PCM/STREAM

COAXIAL

VIDEO OUT

COMPONENT

AV COMPU LINK

P^R

OPTICAL

Digital equipment

S-VIDEO VIDEO

AUDIO OUT

White

Red

OPTICAL

LEFT

AUDIO

DIGITAL

Red

White

RIGHT

COAXIAL

Audio cable

(not supplied)

NOTES

• When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT”

setting in the “AUDIO” page of the preference display correctly according to the connected audio equipment. If the “DIGITAL

AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See

“DIGITAL AUDIO OUTPUT” on page 36.

• With the digital connection, the unit’s settings for COMPRESSION and DOWN MIX in the AUDIO page of the preference display

are invalid. Settings for these items must be made from the decoder.

To connect the power cord

When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the

unit’s AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The

STANDBY indicator lights and setup is completed.

Warning

• Disconnect the power cord if you are not going to use the unit for a long time.

• Disconnect the power cord before cleaning the unit.

• Disconnect the power cord before moving the unit.

• Do not connect or disconnect the power cord with wet hands.

• Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or

other accidents.

Caution

• Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents.

• To prevent any accidents or damages caused by an unsuitable AC power cord, only use the supplied power cord. If

the cord is damaged, contact a dealer and get the new power cord.

• Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other accidents.

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

Using the remote control unit

Using the remote control, you can operate not only all the functions of the unit but also basic functions of your TV.

To install batteries in the remote control unit

The battery compartment is located on the back of the remote control unit.

1 Press down on the point shown by the arrow at the top of the compartment cover,

and pull up the cover to open the compartment.

2 Place the two accessory R6P (SUM-3)/AA(15F) batteries in the remote control

according to the polarity markings (“+” and “–”) inside the compartment and on the

batteries.

3 Place the cover over the compartment, and press down lightly.

•

The batteries will last about six months with normal use. If the functions of the remote control become erratic,

replace the batteries. See below for more information.

Precautions for the safe use of batteries

Observe the following precautions for the safe use of batteries. If they are used improperly their life will be shortened,

they may burst or their contents may leak.

Precaution

• Remove the batteries from the remote control if it is not going to be used for a long period of time.

• Remove dead batteries and dispose of them properly.

• Never leave dead batteries lying around, take them apart, mix them with other refuse, or throw them into an incinerator.

• Never touch liquid that has leaked out of a battery.

• Do not mix new and old batteries, or batteries of different types, when replacing them.

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

To use the remote control unit for TV operation

You can operate your TV from the remote control unit.

Setting the remote control signal for operating your TV.

1 Holding down TV/VIDEO, enter the manufacturer code of your TV listed below by using the numeric buttons (0 - 9).

Do not release TV/VIDEO. Keep holding it until the next step is completed.

Manufacturer code list

Example:

No. Manufacturer

To enter the manufacturer code “01”:

Press “0” then “1.”

JVC

HITACHI

MAGNAVOX

MITSUBISHI

PANASONIC

RCA

PANASONIC

SAMSUNG

SANYO

SHARP

SAMSUNG

SONY

TOSHIBA

ZENITH

2 Press 7 (STOP) while holding down TV/VIDEO.

The following buttons can be used for operating the TV:

TV POWER

DVD POWER

Turns the TV on or off.

SHIFT

Changes the TV channels.

VOL

Adjusts the TV volume.

Selects the TV channels.

SHIFT

*For some TVs, pressing “+10” while holding down SHIFT

functions as the “100+.” “+10” functions as the ENTER button if

your TV requires pressing the ENTER button after selecting a

channel number.

TV 1

TV 9

+10

TV 0

TV 100+

Returns to the previously selected channel (only valid for JVC

TVs).

TV RETURN

SHIFT

TV/VIDEO

Switches input mode (either TV or VIDEO).

3 Try to operate your TV by pressing DVD POWER - TV POWER while holding SHIFT.

If your TV turns on or off, you have successfully set the control signal.

NOTES

• The remote control unit is initially set for operating a JVC TV.

• If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.

To control the volume of a JVC’s amplifier or receiver

You can control the volume of a JVC’s amplifier or receiver by using the AMP VOL button on the remote control unit.

AMP

VOL

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic operations

In the following description, the buttons on the remote control unit are mainly used, however, you may use the

corresponding buttons on the front panel of the unit if available.

Turning on/off the unit

Press POWER on the front panel or press DVD POWER - TV POWER on the remote control unit.

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

DVD POWER

TV POWER

OPEN/CLOSE

DVD PLAYER

SUBTITLE AUDIO

ANGLE TV/VIDEO

POWER

STANDBY

POWER

DIGEST

STROBE

ZOOM

TITLE CHAP.

RESUME THEATER

3D PHONIC

EACH

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

STOP

• You can turn on the unit by pressing the PLAY button on the front

panel or the remote control unit. In this operation, the unit starts

playback if the disc is set in the disc tray. If no disc is set, the disc

tray opens.

LEFT

CURSOR RIGHT

DOWN

• You can also turn on the unit by pressing the OPEN/CLOSE button on

the front panel or the remote control unit. In this case, the disc tray

opens.

REMOTE CONTROL

NOTE

Even if you press the POWER or DVD POWER - TV POWER button to turn off the unit, the unit is not disconnected from the AC

power source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit is designed

to consume a very small quantity of power.

Inserting and removing discs

Press OPEN/CLOSE to open the disc tray.

Place the disc in the tray.

With the label side up

PLAY

OPEN/CLOSE

^PA8^USE

STOP

VDEO CD

DVD

SKIP

• To insert an 8-cm disc, place it

in the inner recess.

THEATER

RESUME

CHAP

TITLE

DISC

EACH

DVD PLAYER

STANDBY

POWER

3D PHONIC

Press OPEN/CLOSE to close the disc tray.

NOTES

• The unit can playback DVD VIDEO, Audio CD, and Video CD discs only. Do not load other disc types. For details about playable

disc types, see page 11.

• When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the

tray is closed, and the disc may not be removed from the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic operations

Basic playback

Now you can play a disc. First, let’s enjoy simple playback according to following procedure.

To start playback

TV POWER

THEATER

Press PLAY.

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

The unit starts playback from the beginning.

DIGEST

STROBE

ZOOM

+10

TV RETURN

TV 100+

NOTES

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

• During playback, the display window shows the title/chapter or track number being played.

SHIFT

^P3^LAY

• With Video CD discs with PBC control or some DVD discs, the menu display may appear

on the TV screen after starting playback. In such a case, select an item to be played back

from the menu.

Basic

control

buttons

STOP

For operation using a menu, see page 20.

LEFT

CURSOR RIGHT

DOWN

• With some DVD discs, the unit starts playback automatically after inserting the disc.

REMOTE CONTROL

To stop playback completely

Press STOP.

The unit stops playback.

To stop playback temporarily

Press PAUSE.

The unit pauses playback. To continue playback, press PLAY.

To advance or reverse playback rapidly while monitoring

7 During playback

From the remote control unit

Hold down 4 or ¢.

Holding down ¢ advances playback rapidly, while holding down 4 reverses playback at 5 times the normal

speed.

Releasing the button returns the unit to normal playback.

Press 4 or ¢ while holding down the SHIFT button.

Each press of 4 or ¢ while holding down the SHIFT button increases the playback speed from 2x to 60x the

normal speed.

Pressing PLAY returns the unit to normal playback.

From the front panel

(For XV-521BK/523GD/525BK)

SHUTTLE knob

SHUTTLE

OPEN/CLOSE

Use the SHUTTLE knob.

PLAY

STOP

^PA8^USE

To advance playback rapidly, turn the shuttle knob to the

right and hold, and to reverse play rapidly, turn the shuttle

knob to the left and hold. By releasing the shuttle knob, the

unit returns to normal playback. The playback speed

changes according to the amount you turn the shuttle knob.

CHAP.

RESUME THEATER

SKIP

EACH

DVD/VDEO CD/CD

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic operations

1/¡ (SEARCH) button

(For XV-421BK)

OPEN/CLOSE

Press 1 or ¡.

PLAY

STOP

^PA8^USE

Each press of 1 or ¡ increases the playback speed

from 2x to 60x the normal speed.

LE CHAP.

RESUME THEATER

SKIP

EACH

Pressing PLAY returns the unit to normal playback.

DVD/VDEO CD/CD

Holding down the 4 or ¢ button on the front panel

also advances or reverses playback rapidly.

To locate the beginning of the scene or song

7 During playback

Press 4 or ¢.

Press 4 to locate the beginning of the current chapter, title, or track, and press ¢ to locate the beginning of

the next chapter, title, or track.

NOTE

When you play a Video CD disc with the PBC function or a DVD VIDEO disc, the unit may locate a different place, but it will

generally locate the beginning of the title or chapter or track.

To resume playback

The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position

next time you press PLAY.

To memorize the interrupted position

Set the RESUME setting on the SYSTEM page of the preference display to ON.

(See page 38 for details about how to set.)

At the position you want to interrupt playback, press STOP, or press DVD POWER - TV POWER on the

remote control or POWER on the front panel.

The unit memorizes the interrupted position, while [RESUME] lights in the display window.

If you interrupt playback by pressing STOP in step 2 above and then turn off the power, the memory is not cleared.

To resume playback

7 While the disc you interrupt playback last time is still in the disc tray.

Press PLAY.

The unit starts playback from the position where you interrupted playback last time.

¶ To clear the resume position memory

Operate one of the followings:

* Take out the disc from the tray

* Press STOP while stopped

* Turn on the unit by pressing DVD POWER - TV POWER (on the remote control) or POWER (on the front

panel).

NOTES

• Do not press POWER (on the front panel) or DVD POWER - TV POWER (on the remote control) to turn on the unit if you want

to resume playback, which will clear the resume position memory.

• The resume function does not work with Audio CD discs.

• The resume function does not work if RESUME on the SYSTEM page of the preference display is set to OFF.

• In the case of a Video CD disc with PBC function, the unit may resume playback from a point slightly earlier than the resume

point you stored.

• The resume function does not work in the program or random mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

NOTES

Playing from a specific

position on a disc

You can play a disc from the selected track, title or

chapter, or from the specified time.

• When

step 1:

The disc does not have a menu listing the titles.

• When appears on the TV screen by pressing MENU

in step 1:

appears on the TV screen by pressing TITLE in

The disc does not have a menu

• The menu button does not work while stopped.

To locate a desired scene from the DVD

To locate a desired scene from the menu

of the Video CD with PBC

DVD VIDEO discs generally have their own menus

which show the disc contents. These menus contain

various items such as titles of a movie, names of

songs, or artist information, and display them on the

TV screen. You can locate a desired scene by using the

menu.

Some Video CD discs are compatible with the PBC

function. PBC is an abbreviation of “PlayBack Control.”

A Video CD disc recorded with PBC has its own menus,

such as a list of the songs of the disc and items

recorded on the disc. You can also locate a specific

scene by using the menu.

TV POWER

OPEN

THEATER

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

+10

TV RETURN

TV 100+

SUBTITLE AUDIO

ANGLE TV/VIDEO

AMP

VOL

SLOW

DIGEST

STROBE

ZOOM

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

STOP

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

LEFT

CURSOR RIGHT

DOWN

SHIFT

^P3^LAY

STOP

REMOTE CONTROL

LEFT

CURSOR RIGHT

DOWN

7 Whenever a DVD VIDEO disc is loaded

REMOTE CONTROL

Press MENU or TITLE.

The menu appears on the TV screen.

7 When a Video CD disc with PBC is stopped

Press PLAY.

Example:

A disc menu

appears on the TV

screen (The PBC

function is

About menu

Example

Normally, a DVD VIDEO disc

which contains more than one

title may have a “title” menu

which lists the titles. In this

case, the menu appears on the

TV screen by pressing the

TITLE button. Some DVD

VIDEO discs may also have a

different menu which appears

by pressing the MENU button.

activated).

“Pbc” is indicated in the display window on the

front panel.

See the instructions of each DVD VIDEO disc for its particular

menu.

Use the numeric buttons to select the desired

number of the item.

• See page 10 for details about how to use the

numeric buttons.

Use CURSOR 2/3/5/∞ to select a desired

item, then press ENTER.

The unit starts playback of the selected item.

Playback starts from the selected item.

You can return to the menu by pressing RETURN -

CHOICE.

With some discs, you can also select items by entering the

corresponding number using the numeric buttons, which may

cause the unit to automatically start playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

When “NEXT” or “PREVIOUS” appears on the TV

screen, the unit generally works as follows:

NOTES

• When

appears on the TV screen.

• Pressing ¢ advances to the next page.

• Pressing 4 returns to the previous page.

* The method of the operation is different

depending on the disc.

The title or track you have specified is not contained in

the disc.

• This function does not work during Video CD playback

with PBC function

• To activate the PBC function when a PBC-compatible Video

CD disc is being played back without the PBC function,

press STOP then press PLAY.

• You can also activate the PBC function using the play mode

menu display as follows.

To locate a desired selection using 4

or ¢

1. Press PLAY MODE - CANCEL.

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

2. Use the CURSOR 2/3 to move

to [PBC CALL], then

SUBTITLE AUDIO

ANGLE TV/VIDEO

press ENTER.

DIGEST

STROBE

ZOOM

• If you want to playback a PBC-compatible Video CD disc

without activating the PBC function, start playback by using

the numeric buttons instead of the PLAY button. See the

next paragraph.

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

STOP

To locate a desired selection using the

numeric buttons

LEFT

CURSOR RIGHT

DOWN

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

REMOTE CONTROL

DIGEST

STROBE

ZOOM

7 For DVD VIDEO: During playback

+10

TV RETURN

TV 100+

For Audio CD: During playback

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

For Video CD:

During playback without PBC

function

SHIFT

^P3^LAY

STOP

Press 4 or ¢.

With an Audio CD or Video CD, pressing the

button skips a track. With a DVD VIDEO disc,

pressing the button skips a chapter or title

depending on the disc configuration.

LEFT

CURSOR RIGHT

DOWN

REMOTE CONTROL

The selection number appears in the display

window on the front panel.

You can play a desired title (DVD VIDEO) or track

(Audio CD/Video CD) by specifying the number.

• To locate a subsequent selection, press ¢ once

or repeatedly until the desired selection number

appears in the display.

• To locate to beginning of the current selection,

press 4 once.

• To locate a former selection, press 4 repeatedly

until the desired selection number appears in the

display.

7 For DVD VIDEO: While stopped

For Audio CD: Whenever an Audio CD disc is

loaded

For Video CD:

During playback without PBC

function or while stopped

Use the numeric buttons to specify the desired

title or track number.

NOTES

The unit starts playback from the selected title or

track.

• This function may not work with some DVD VIDEO discs.

• This function does not work during Video CD playback

with PBC function

• See page 10 for details about how to use the

numeric buttons.

The selected title or track number appears in the

display window on the front panel.

Display window

TITLE

TRACK

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

NOTES

To locate a desired scene by specifying

the chapter number [CHAP. SEARCH]

• When the chapter number is incorrect in step 3:

Overwrite the incorrect number with the correct number.

• When

is displayed in the TV screen in step 4:

The chapter you have selected is not contained in the

disc, or chapter search does not work on the disc.

If the current title of a DVD VIDEO disc being played is

divided into chapters, you can skip to a desired chapter

by specifying the chapter number using the on-screen

display.

• With some discs, the unit automatically starts searching

for the chapter after entering the chapter number in step

• To turn off the play mode menu:

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

Press PLAY MODE.

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

+10

To locate a desired position in the

current title or track [TIME SEARCH]

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

STOP

You can play a disc from the desired position by

specifying the elapsed time from the beginning of the

current title or track using the TIME SEARCH function.

Note that some DVD VIDEO discs do not contain time

information, and the TIME SEARCH function cannot be

used.

LEFT

CURSOR RIGHT

DOWN

REMOTE CONTROL

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

7 During DVD VIDEO playback

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

Press PLAY MODE - CANCEL.

The DVD play mode menu appears on the TV

+10

screen.

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

Use CURSOR 2/3 to move

to [CHAP.

^P3^LAY

SEARCH], then press ENTER.

STOP

“GO TO CHAPTER = ”

DVD CONTROL

appears under the

menu.

LEFT

CURSOR RIGHT

DOWN

REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH

GO TO CHAPTER =

REMOTE CONTROL

7 For DVD VIDEO: During playback

Use the numeric buttons (0 ~ 9) to enter the

desired chapter number.

Example:

For Audio CD: During playback

For Video CD:

During playback without PBC

function

To select chapter number 8:

Press “8” → ENTER.

To select chapter number 37:

Press PLAY MODE - CANCEL.

The play mode menu appears on the TV screen.

Press “3” → “7” → ENTER.

Use CURSOR 2/3 to move

SEARCH], then press ENTER.

“GO TO” appears under the menu.

to [TIME

Press ENTER.

The unit starts playback from the selected chapter.

Use the numeric buttons (0 ~ 9) to enter the

time.

The “10” and “+10” buttons are not used in this function.

You can specify the elapsed time of the current

title or track to set the location which you want to

playback from.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

Press ENTER.

The unit starts playback from the specified time.

To locate a desired scene from the

digest display [DIGEST]

(for DVD VIDEO)

(for Audio CD)

DVD CONTROL

CD CONTROL

REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH

REPEAT A-B REPEAT TIME SEARCH

The unit can display the opening scene of each title or

chapter on a DVD VIDEO or each track of a Video CD.

You can select a desired scene from those displayed on

the TV screen.

GO TO 2 : 3 4 : 0 0

GO TO 0 2 : 3 4

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

Selected time

DIGEST

STROBE

ZOOM

(for Video CD)

VCD CONTROL

REPEAT A-B REPEAT TIME SEARCH PBC CALL

+10

• “10” and “+10” buttons are

not used in this function.

TV RETURN

TV 100+

AMP

VOL

SLOW

VOL

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

GO TO 0 2 : 3 4

• You can specify the time in

hour/minute/second format

for DVD VIDEO discs, and

in minute/second format

for Audio and Video CD

discs.

SHIFT

^P3^LAY

STOP

Selected time

LEFT

CURSOR RIGHT

DOWN

Example (for DVD VIDEO):

REMOTE CONTROL

To playback from 2(H):34(M):00(S)

GO TO _ : _ _ : _ _

7 For DVD VIDEO: While stopped or during playback

Press “2”.

For Video CD:

While stopped or during playback

without PBC function.

GO TO 2 : _ _ : _ _

Press “3”.

Press SUBTITLE - DIGEST while holding

down SHIFT.

GO TO 2 : 3 _ : _ _

Up to nine opening scenes are displayed.

Press “4”.

• While a DVD VIDEO disc is stopped:

The opening scene of each title appears on the

TV screen.

• During DVD VIDEO disc playback:

The opening scene of each chapter in the current

title appears on the TV screen.

• When a Video CD disc is loaded:

The opening scene of each track appears on the

TV screen .

GO TO 2 : 3 4 : _ _

Press ENTER.

You do not have to press “0” to enter the trailing zeros

(for the last two digits in the example above). Of

course, it is possible to enter them.

• When you make a mistake

Move the cursor to the incorrect value, then press the

correct button to re-select the value.

GO TO 2 : 3 5 : _ _

Press CURSOR 2.

GO TO 2 : 3 _ : _ _

Press “4”.

Use CURSOR 2/3/5/∞ to select the desired

GO TO 2 : 3 4 : _ _

scene.

The selected scene is indicated by

NOTES

If there are more than 9 scenes, the digest screen

will have more than one page. In this case,

pressing ¢ advances to the next page, while

pressing 4 returns to the previous page.

• When

appears on the TV screen in step 2:

The time you have selected is not contained on the disc,

or the time search function does not work on the disc.

Also note that the time search function does not work

during Video CD playback with the PBC function.

• To turn off the play mode menu:

Press PLAY MODE.

• The TIME SEARCH function cannot be used during

program playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

Special picture playback

The unit provides special picture playback functions

including Frame-by-frame, Strobe, Slow-motion and

Zoom.

Selected scene

To advance a still picture frame-by-frame

PLAY MODE DISPLAY RETURN

CANCEL

TIME

CHOICE

SHIFT

• When the lower right scene is selected, pressing CURSOR 3

advances to the next page if available. Similarly, when the

upper left scene is selected, pressing CURSOR 2 returns to

the previous page (if available).

• When there are more than one digest page, after pressing

SUBTITLE - DIGEST while holding down SHIFT, pressing

¢ before all 9 scenes of the first page appear on the TV

screen will advance to the next page. Similarly, pressing

4 before all the scenes of the second or latter page

appear on the TV screen will return to the previous page.

^P3^LAY

STOP

LEFT

CURSOR RIGHT

DOWN

REMOTE CONTROL

7 While paused (still)

Press PAUSE.

Each time you press PAUSE, the still picture

advances to the next frame.

Press ENTER.

The unit starts playback from the selected title or

track.

Pressing PLAY returns to the normal playback

mode.

NOTE

With some discs, depending on the contents, it may take

some time until all the scenes appear on the screen.

To display still pictures [STROBE]

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

STOP

LEFT

CURSOR RIGHT

DOWN

REMOTE CONTROL

7 During playback

At the point you want to view as continuous

photographs, press PAUSE.

The unit pauses playback.

Press AUDIO - STROBE while holding down

SHIFT.

Nine continuous still

pictures appear on

the TV screen.

• Pressing PAUSE when the nine still pictures appear will

advance to the next nine still pictures.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

• To cancel strobe play

Press AUDIO - STROBE while holding down SHIFT.

From the front panel (for XV-421BK)

OPEN/CLOSE

PLAY

NOTES

STOP

^PA8^USE

• Pressing and holding PAUSE for more than 1 second also

activates the Strobe function.

CHAP.

RESUME THEATER

SKIP

EACH

DVD/VDEO CD/CD

• If you press AUDIO - STROBE while holding down SHIFT

during playback, nine still pictures also appear but they

advance in realtime.

Press PAUSE then use 1/¡.

To play forward slow-motion, press ¡, and to

play reverse slow-motion (for DVD VIDEO discs

only), press 1. First, the unit plays the slowest

speed, and each time you press the button, the

playback speed increases.

To playback in slow-motion [SLOW]

7 During playback

From the remote control unit

• To return to normal playback

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

Press PLAY.

DIGEST

STROBE

ZOOM

• To pause slow-motion playback

Press PAUSE.

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

VOL

NOTES

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

• The sound is muted during slow-motion playback.

STOP

• Reverse slow-motion playback is not possible for a Video

CD.

LEFT

CURSOR RIGHT

DOWN

REMOTE CONTROL

Press SLOW.

To play forward slow-motion, press SLOW “+“,

and to play reverse slow-motion (for DVD VIDEO

discs only), press SLOW “–“. First, the unit plays

the slowest speed, and each time you press the

button, the playback speed increases.

From the front panel (for XV-521BK/523GD/

525BK)

SHUTTLE

OPEN/CLOSE

PLAY

STOP

^PA8^USE

CHAP.

RESUME THEATER

SKIP

EACH

DVD/VDEO CD/CD

Press PAUSE, then use the SHUTTLE knob.

To play forward slow-motion, turn the SHUTTLE

knob to the right. To play reverse slow-motion (for

DVD VIDEO discs only), turn it to the left. The

more you turn the knob, the more the slow-

motion speed increases.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

To zoom a scene [ZOOM]

Changing the playback order

You can play titles or tracks in the desired order or in

random order.

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

To playback in the desired order

[PROGRAM]

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

You can play titles or tracks in the desired order by

using the Program function.

STOP

LEFT

CURSOR RIGHT

DOWN

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

REMOTE CONTROL

DIGEST

STROBE

ZOOM

7 During playback or while paused

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

Press ANGLE - ZOOM while holding down

SHIFT.

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

STOP

“ZOOM” appears on the TV screen.

The unit zooms in to the center part of the scene

to produce a double-sized image.

LEFT

CURSOR RIGHT

DOWN

REMOTE CONTROL

7 While stopped

Press PLAY MODE - CANCEL.

The play mode menu appears on the TV screen.

ZOOM

Use CURSOR 2/3 to move

[PROGRAM] and press ENTER.

REPEAT

PROGRAM

RANDOM

Use CURSOR 2/3/5/∞ to move the

zoomed-in scene.

The program table appears under the menu bar

(as shown above).

ZOOM

The “PROGRAM” indicator appears in the display

window on the front panel.

Select the titles or tracks in the desired order

using the numeric buttons.

See page 10 for details about how to use the

numeric buttons.

• To pause zoom play

Press PAUSE.

To resume zoom play, press PLAY.

Up to 18 titles or tracks can be programmed. You

may select the same title or track more than once.

• To return to normal playback

Press ANGLE - ZOOM while holding down SHIFT.

NOTE

During Zoom play, the picture may be garbled or noisy.

The programmed title/track number is

shown under each program number.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

• When you specify a wrong selection

To playback in random order [RANDOM]

Press PLAY MODE - CANCEL while holding down

the SHIFT. The last selection programmed is

erased.

• To clear the program

Press STOP.

You can play titles or tracks in random order by using

the Random function.

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

Press PLAY to start program play.

When all of the programmed titles/tracks have

finished playback, the unit stops but the program

remains.

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

VOL

NOTES

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

• Some DVD VIDEO discs may not be played back correctly

in program mode.

^P3^LAY

STOP

• During program playback, pressing ¢ skip to the next

selection of the program. Pressing 4 returns to the

beginning of the current selection, however, you cannot

skip back to the previous selection.

LEFT

CURSOR RIGHT

DOWN

• By pressing PLAY MODE - CANCEL during program

playback, the program table is displayed on the TV screen

and the current program number is indicated in yellow.

REMOTE CONTROL

7 While stopped

Press PLAY MODE - CANCEL.

The play mode menu appears on the TV screen.

• To quit program playback

Press STOP and press STOP again.

The “PROGRAM” indicator in the display window

turns off and the program is cleared.

Use CURSOR 2/3 to move

[RANDOM].

REPEAT

PROGRAM

RANDOM

While stopped and the play mode menu is displayed on the TV

screen, by moving

to [PROGRAM] and pressing ENTER, the

program mode quits. Note that the program remains.

The “RANDOM” indicator appears in the display

window on the front panel.

Press ENTER.

The unit starts random playback.

After playing all titles/tracks of the disc, random

playback ends.

The same title or track will not be played back more than once

during random play.

• To stop/quit random playback in the middle

Press STOP to stop playback. The unit is still in

random playback mode, so pressing PLAY starts

random playback again.

To quit random playback, press STOP again while

stopped. The “RANDOM” indicator in the display

window turns off.

NOTE

Some DVD VIDEO discs may not be played back correctly

in random mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

• For Audio/Video CD

Repeat playback

You can repeat playback of the current selection or all

disc contents. You can also repeat playback of a desired

part.

(for Video CD)

(for Audio CD)

VCD CONTROL

CD CONTROL

REPEAT A-B REPEAT TIME SEARCH PBC CALL

REPEAT A-B REPEAT TIME SEARCH

REPEAT ALL

To repeat the current selection or all disc

contents [REPEAT]

Selected repeat mode

REPEAT ALL (all track repeat)

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

REPEAT 1 (current track repeat)

DIGEST

STROBE

ZOOM

No indication

(off)

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

• To stop repeat playback

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

Press STOP.

^P3^LAY

STOP

LEFT

CURSOR RIGHT

DOWN

• If you press STOP in REPEAT ALL mode, the unit stops

playback but remains in the mode.

• If you press STOP in REPEAT1, TITLE REPEAT or CHAPTER

REPEAT mode, the unit stops playback and quits the mode.

REMOTE CONTROL

• To quit repeat playback

7 In any condition except Video CD playback with PBC

With

pointed at [REPEAT], press ENTER

repeatedly until the mode is set to off.

Press PLAY MODE - CANCEL.

The play mode menu appears on the TV screen.

NOTES

Use CURSOR 2/3 to move

to [REPEAT],

• Some DVD VIDEO discs do not allow the title repeat or/

and chapter repeat.

then press ENTER.

• Some DVD VIDEO discs automatically stops playback in

the middle of the disc.

Each time you press ENTER, the repeat mode

changes as follows:

• Repeat playback function cannot be used during Video

CD playback with PBC function.

• For DVD VIDEO

• To turn off the play mode menu display

Press PLAY MODE - CANCEL.

DVD CONTROL

REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH

REPEAT ALL

The selected repeat mode appears

on the TV screen.

REPEAT ALL (all title repeat)

* REPEAT TITLE (current title repeat)

* REPEAT CHAPTER (current chapter repeat)

No indication (off)

* While stopped, you cannot select REPEAT TITLE or

REPEAT CHAPTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

• To quit A-B repeat playback

Press STOP. The unit stops playback and quits the A-

B repeat mode.

To repeat a desired part [A-B REPEAT]

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

• During playback, pressing ENTER when

B REPEAT] quits the A-B repeat mode and continues

playback.

• You can also quit the A-B repeat mode by pressing 4 or

¢.

is pointed at [A-

DIGEST

STROBE

ZOOM

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

NOTES

^P3^LAY

• To turn off the play mode menu

STOP

Press PLAY MODE - CANCEL.

• If

playback

appears when pressing ENTER in step 2 during DVD

LEFT

CURSOR RIGHT

DOWN

2, 3

You cannot repeat the selected portion because of the

disc contents.

REMOTE CONTROL

• The A-B REPEAT function cannot be used during program

playback.

7 During playback

Press PLAY MODE - CANCEL.

The play mode menu appears on the TV screen.

Use CURSOR 2/3 to move

to [A-B

REPEAT], then press ENTER at the beginning

of the part you want to repeat (point A).

Make sure that REPEAT mode is off. If any one of

the REPEAT modes is selected, you cannot move

to [A-B REPEAT].

Press ENTER at the end of the part you want

to repeat (point B).

The unit locates “A” and starts repeat playback

between “A” and “B.”

(for DVD VIDEO)

(for Audio CD)

DVD CONTROL

CD CONTROL

REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH

REPEAT A-B REPEAT TIME SEARCH

A 0:00:16

B 0:01:16

A 0:00:16

B 0:01:31

Point A Point B

(for Video CD)

VCD CONTROL

REPEAT A-B REPEAT TIME SEARCH PBC CALL

A 0:00:16

B 0:01:31

Point A Point B

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

To select a scene angle from the angle

list display [ANGLE]

Selecting a scene angle of

DVD VIDEO

You can enjoy a variety of scene angles if the DVD

VIDEO disc contains “multi-angle” parts, where

multiple cameras were used to shoot the same scene

from different angles.

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

At the beginning of “multi-angle” parts,

screen.

appears on the TV

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

STOP

To select a scene angle from the normal

screen [ANGLE]

LEFT

CURSOR RIGHT

DOWN

REMOTE CONTROL

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

7 During DVD VIDEO playback

Press and hold ANGLE - ZOOM for more than

1 second.

Up to nine camera

angles recorded on

a disc appear on the

TV screen.

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

STOP

LEFT

CURSOR RIGHT

DOWN

REMOTE CONTROL

The selected camera angle

Use CURSOR 5/∞/2/3 to select the desired

7 During DVD VIDEO playback

angle.

Press ANGLE - ZOOM.

Press ENTER.

The Angle selectin

display appears on

the TV screen.

1 / 3

7 The selected angle appears on the TV screen.

NOTES

• When

appears on the TV screen in step 1:

The current scene is not recorded from multiple angles.

Press ANGLE - ZOOM or CURSOR 2/3 to

• During the operation above, audio is muted.

select the desired angle.

Each time you press

ANGLE or CURSOR 2/3,

the angle changes.

Example:

1 / 3

2 / 3

3 / 3

NOTES

• The Angle selection display will automatically disappear

if you do not change the angle for 10 seconds.

• To turn off the Angle selection display manually, press

ENTER.

• When

appears on the TV screen

The current scene is not recorded from multiple angles.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

To change the audio language or sound

[AUDIO]

Changing the language and

sound

For DVD VIDEO discs, you can select the subtitle

language, as well as the audio language/sound

included on a disc.

By AUDIO selection, you can choose the audio

language of movies or choose to enjoy karaoke with or

without the vocal.

For Video CD discs, you can select the audio channel(s).

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

To select the subtitle language [SUBTITLE]

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

1, 2

7 During DVD VIDEO playback

+10

TV POWER

THEATER

OPEN

TV RETURN

TV 100+

/CLOSE 3D-PHONIC POSITION DVD POWER

AMP

VOL

SLOW

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

1, 2

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

STOP

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

LEFT

CURSOR RIGHT

DOWN

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

REMOTE CONTROL

STOP

LEFT

CURSOR RIGHT

DOWN

7 During playback

Press AUDIO - STROBE.

The Audio selection display appears on the TV

screen.

REMOTE CONTROL

Press SUBTITLE.

The Subtitle selection

display appears on the

TV screen.

(DVD VIDEO)

(Video CD)

1 / 3

ENGLISH

1 / 3

ENGLISH

STEREO

Press AUDIO - STROBE or CURSOR 2/3 to

select the desired audio.

To turn the subtitle on and off, press

SUBTITLE.

• For DVD VIDEO

Example:

Each time you press AUDIO

- STROBE or CURSOR 2/3,

the audio language or

sound changes.

1/3 ENGLISH

To select the desired subtitle language, press

CURSOR 2/3.

2/3 FRENCH

Example:

Each time you press

CURSOR 2/3, the

subtitle language

changes.

1/3 ENGLISH

2/3 FRENCH

3/3 SPANISH

–/3 (off)

3/3 SPANISH

• For Video CD

STEREO

Each time you press AUDIO

- STROBE or CURSOR 2/3,

the playback audio changes

as follows.

NOTES

• For DVD VIDEO, the selected language may be

abbreviated on the TV screen. See “Appendix A: Table

of languages and their abbreviations” at the end of this

manual.

• For DVD VIDEO, the selected language may be

abbreviated on the TV screen. See “Appendix A: Table

of languages and their abbreviations” at the end of this

manual.

• The Subtitle selection display will automatically

disappear if you do not change the subtitle for 10

seconds.

• The Audio selection display will automatically disappear

if you do not change the audio for 10 seconds.

• To turn off the Audio selection display manually, press

ENTER.

• To turn off the Subtitle selection display manually, press

ENTER.

•

When

appears on the TV screen (for a DVD VIDEO disc):

• When

appears on the TV screen:

You cannot select the audio.

You cannot select the subtitle.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

Selecting the picture

character

You can select the quality of the image from among

four options (OFF, 1, 2 and 3) according to the type of

programming, picture tone or personal preferences.

Enjoying virtual surround

sound

Using the 3D Phonic function, you can get a simulated

surround effect from your stereo system.

To simulate surround sound [3D PHONIC]

To select the picture character [THEATER

POSITION]

TV POWER

THEATER

OPEN

1, 2

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

TV POWER

OPEN

THEATER

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

+10

TV RETURN

TV 100+

^P3^LAY

AMP

VOL

SLOW

STOP

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

^P3^LAY

LEFT

CURSOR RIGHT

DOWN

STOP

REMOTE CONTROL

LEFT

CURSOR RIGHT

DOWN

REMOTE CONTROL

7 During playback

Press 3D PHONIC.

7 During playback

Press THEATER POSITION to select the

desired picture character.

Select the desired effect mode by pressing 3D

PHONIC.

Each time you press 3D PHONIC, the effect mode

changes as follows:

Each time you press the button, the picture

character changes as follows:

THEATER 1

3D PHONIC DRAMA

Selected picture character

Selected effect mode

3D PHONIC ACTION*

3D PHONIC DRAMA

3D PHONIC THEATER

3D PHONIC OFF

THEATER 1

“THEATER OFF” is

THEATER 2

THEATER 3

the normal position.

Selecting a higher

number tones down

the picture character.

THEATER OFF

• ACTION:

Suitable for action movies and sports programs in

which sounds dynamically move.

• DRAMA:

Natural and warm sound. You can enjoy movies in a

relaxed mood.

• THEATER:

You can enjoy sound effects like in a major theater in

Hollywood.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

* When you play a DVD VIDEO disc recorded in Dolby

Digital which contains more than 2 channels, ACTION

does not appear.

Checking the status

You can check the disc/time information, as well as the

DVD functions, of the disc.

NOTES

• With a Video CD disc, if the AUDIO setting is set to L or

R, you cannot activate the 3D Phonic function (i.e. the

3D Phonic mode is fixed to OFF).

To check the disc/time information

Conversely, when the 3D Phonic function is active,

changing the AUDIO setting to L or R from STEREO

cancels the 3D Phonic function.

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

• The 3D phonic function works correctly when playing

back discs recorded in the Dolby Surround or Dolby

Digital 5.1-CH format.

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

It also works when playing back discs other than those

above, but does not provide the correct effect.

+10

TV RETURN

TV 100+

AMP

VOL

• The 3D Phonic function does not affect the DTS or Dolby

Digital bitstream signal from the DIGITAL OUT jack.

SLOW

VOL

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

• The sound effect will not be set or operate, even if 3D

PHONIC is pressed, for the sound of DVD VIDEO discs

recorded in Linear PCM.

^P3^LAY

STOP

• When you set the 3D PHONIC function to on, the DOWN

MIX and COMPRESSION settings in the AUDIO page of

the preference display are disabled.

LEFT

CURSOR RIGHT

DOWN

REMOTE CONTROL

7 During playback

Press DISPLAY - TIME once for a Audio CD or

Video CD disc, or twice for a DVD VIDEO disc.

The disc/time display appears on the TV screen.

During playback of a DVD VIDEO disc, pressing DISPLAY - TIME

while holding down SHIFT directly turns on the disc/time display.

(for DVD VIDEO)

Mbps

TITLE

CHAP.

TIME

2:25:25

BITRATE

3.3

Transmission rate

Time

Current chapter number

Current title number

(for Audio CD or Video CD playing without PBC)

_TRACK1

00:08

EACH

TIME

Time mode

Time

Current track number

(for Video CD playing with PBC)

25:25 PBC

TRACK

TIME

PBC on status

Time

Current track number

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced operations

To change the time display mode (only for

Audio CD or Video CD without PBC), press

DISPLAY - TIME while holding down SHIFT.

The time display mode cycles as below.

To check the DVD function status

7 During DVD VIDEO playback

TV POWER

THEATER

(for Audio CD)

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

EACH

(current track elapsed time)

DIGEST

STROBE

ZOOM

EACH REMAIN

(current track remaining time)

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

TOTAL

(disc elapsed time)

^P3^LAY

STOP

TOTAL REMAIN

(disc remaining time)

LEFT

CURSOR RIGHT

DOWN

REMOTE CONTROL

(for Video CD without PBC)

EACH

(current track elapsed time)

Press DISPLAY – TIME.

The DVD function status display appears on the

TV screen.

EACH REMAIN

(current track remaining time)

The selected time information is displayed on the

TV screen, as well as in the front panel display

window.

1 / 2

ENGLISH ENGLISH

7 While stopped

You can check the total disc time and current (selected)

track time of an Audio CD/Video CD only from the front

panel display window.

The current selections of the camera angle, audio

language and subtitle language are displayed.

Press DISPLAY - TIME while holding down

SHIFT.

• To turn off the DVD function status display

Press DISPLAY-TIME twice.

When EACH and REMAIN are indicated, the

current (selected) track time appears. When only

REMAIN is indicated, the total disc time appears.

You can change the current (selected) track by pressing 4 or

¢.

• To turn off the disc/time display

Press DISPLAY-TIME.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial settings

Press CURSOR 2/3 to select the setting you

Selecting preferences

You can set various preferences for playback via four

dedicated displays.

want.

• To turn off the preference display, press RETURN-CHOICE

while holding down SHIFT, or move

press ENTER.

to [EXIT] and

• For details about each setting, see the following

paragraphs:

How to set preferences

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

LANGUAGE page

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

MENU LANGUAGE

You can select the default “display” language to be

displayed if it is contained on the disc.

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

SHIFT

AUDIO

DISPLAY

SYSTEM

LANGUAGE

Each time you press

CURSOR 3, the language

setting changes in the

following order:

^P3^LAY

ENGLISH

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE

ENGLISH

STOP

ON SCREEN LANGUAGE

EXIT

LEFT

CURSOR RIGHT

DOWN

PRESS

KEY

REMOTE CONTROL

ENGLISH = SPANISH = FRENCH = CHINESE =

GERMAN = ITALIAN = JAPANESE = language code

from AA to ZU

When the unit is stopped or no disc is

inserted, press RETURN-CHOICE while

holding down SHIFT.

(See “Table of languages and their abbreviations” at

the end of this manual.)

Pressing CURSOR 2 changes the language setting in

the reverse order of the above.

One of the preference pages appears on the TV

screen.

There are four preference pages: LANGUAGE,

AUDIO, DISPLAY and SYSTEM. To turn the page,

* If the selected language is not recorded, the disc’s

default display language will be displayed.

move

to the desired tab using CURSOR 2/3.

AUDIO LANGUAGE

LANGUAGE

AUDIO

You can select the default audio language to be played

if it is contained on the disc.

AUDIO

DISPLAY

SYSTEM

AUDIO

DISPLAY

SYSTEM

LANGUAGE

DOLBY

ENGLISH

_DIGITAL/PCM

Lo / Ro

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE

DIGITAL AUDIO OUTPUT

DOWN MIX

ENGLISH

COMPRESSION

AUDIO

DISPLAY

SYSTEM

LANGUAGE

ON SCREEN LANGUAGE

Each time you press

CURSOR 3, the language

setting changes in the

following order:

ENGLISH

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE

EXIT

ENGLISH

PRESS

KEY

PRESS

KEY

ON SCREEN LANGUAGE

EXIT

DISPLAY

SYSTEM

PRESS

KEY

AUDIO

DISPLAY

SYSTEM

AUDIO

DISPLAY

SYSTEM

LANGUAGE

4:3 LB

OFF

MONITOR TYPE

AUTO STANDBY

RESUME

AV COMPULINK MODE

SCREEN SAVER

ENGLISH = SPANISH = FRENCH = CHINESE =

GERMAN = ITALIAN = JAPANESE = language code

from AA to ZU

DVD 1

ON SCREEN GUIDE

EXIT

PRESS

KEY

PRESS

KEY

(See “Table of languages and their abbreviations” at

the end of this manual.)

* The “AV COMPULINK

MODE” selection is not

available with the XV-

421BK.

Pressing CURSOR 2 changes the language setting in

the reverse order of the above.

* If the selected language is not recorded, the disc’s

default audio language will be played.

Move

to select the item you want to set

by using CURSOR 5/∞.

AUDIO

DISPLAY

SYSTEM

LANGUAGE

ENGLISH

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE

ENGLISH

ON SCREEN LANGUAGE

EXIT

PRESS

KEY

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial settings

SUBTITLE

AUDIO page

You can select the default subtitle language to be

displayed if it is contained on the disc.

DIGITAL AUDIO OUTPUT

AUDIO

DISPLAY

SYSTEM

LANGUAGE

To connect the unit‘s

digital output to an

external device equipped

with a digital input, this

item must be set

Each time you press

CURSOR 3, the language

setting changes in the

following order:

AUDIO

DISPLAY

SYSTEM

LANGUAGE

ENGLISH

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE

DOLBY

_DIGITAL/PCM

Lo / Ro

DIGITAL AUDIO OUTPUT

DOWN MIX

ENGLISH

COMPRESSION

ON SCREEN LANGUAGE

EXIT

PRESS

KEY

PRESS

KEY

correctly.

• PCM ONLY:

ENGLISH = SPANISH = FRENCH = CHINESE =

GERMAN = ITALIAN = JAPANESE = language code

from AA to ZU

When you connect the DIGITAL OUT jack of the unit to

the linear PCM digital input of other audio equipment.

(See “Table of languages and their abbreviations” at

the end of this manual.)

• STREAM/PCM:

When you connect to the digital input of an amplifier

to a built-in DTS, Dolby Digital, or MPEG

multichannel decoder.

Pressing CURSOR 2 changes the language setting in

the reverse order of the above.

* If the selected language is not recorded, the disc’s

default subtitle language will be displayed.

• DOLBY DIGITAL/PCM:

When you connect to the digital input of a Dolby

Digital decoder, or an amplifier with a built-in Dolby

Digital decoder.

ON SCREEN LANGUAGE

You can select the on-screen display language to be

displayed.

The following chart shows the relationship between

types of playback discs and output signals.

AUDIO

DISPLAY

SYSTEM

LANGUAGE

Each time you press

CURSOR 3, the language

setting changes as

follows:

ENGLISH

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE

ENGLISH

Playback discs

Output

ON SCREEN LANGUAGE

STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY

EXIT

48-kHz,

16-bit linear

PCM

←

PRESS

KEY

DVD with 48-kHz,

16-bit linear PCM

ENGLISH

←

48-kHz,

20-bit linear

PCM

DVD with 48-kHz,

20/24-bit linear

PCM

ESPAÑOL (Spanish)

FRANCAIS (French)

←

No output

←

No output

DVD with 96-kHz,

linear PCM

DTS

bitstream

DVD with DTS

English

Spanish

French

ON SCREEN LANGUAGE

IDIOMA EN PANTALLA

LANGUE D’ECRAN

ENGLISH

48-kHz, 16-bit

linear PCM

Dolby Digital

bitstream

DVD with Dolby

Digital

ESPAÑOL

FRANCAIS

←

48-kHz, 16-bit

linear PCM

MPEG

bitstream

DVD with MPEG

multichannel

←

44.1-kHz,

16-bit linear

PCM

Video CD

Pressing CURSOR 2 changes the language setting in

the reverse order of the above.

←

44.1-kHz,

16-bit linear

PCM

Audio CD

DTS

bitstream

Audio CD with

DTS

←

NOTES

• The unit does not provide the DTS decoding function.

• When playing a DVD VIDEO or Audio CD disc with DTS,

use a DTS decoder to get correct signals from your

speakers. Never use the unit's analog output jacks, which

output incorrect signals that may damage your speakers.

If you connect the analog outputs and digital outputs

simultaneously, be sure to select the source of the

amplifier correctly, or set the level control of the amplifier

connected to the analog outputs to minimum.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial settings

DOWN MIX

To playback a DVD VIDEO

disc recorded with

surround multichannel

audio correctly, the DOWN

MIX setting must be

properly made according

to your audio system.

Note that this setting affects the output signal from the

AUDIO (both DIGITAL and ANALOG) output jacks when

playing back a DVD VIDEO disc recorded with surround

multichannel audio.

DISPLAY page

AUDIO

DISPLAY

SYSTEM

LANGUAGE

DOLBY

_DIGITAL/PCM

Lo / Ro

DIGITAL AUDIO OUTPUT

DOWN MIX

MONITOR TYPE

COMPRESSION

You can select the monitor

type to match your TV

when you playback DVD

VIDEO discs recorded for

wide screen televisions.

AUDIO

DISPLAY

4:3 LB

SYSTEM

LANGUAGE

EXIT

MONITOR TYPE

SCREEN SAVER

ON SCREEN GUIDE

OFF

PRESS

KEY

EXIT

PRESS

KEY

• 4:3 LB

(Letter Box Conversion)

When you connect a normal TV

to the unit.

• Lt/Rt

When you play a wide picture

recorded on a DVD VIDEO disc,

the picture is displayed with

bands across the upper and

lower portions of the screen.

When you enjoy multichannel surround audio by

connecting the unit’s AUDIO output (normally, the

DIGITAL output) to a surround decoder.

• Lo/Ro

When you enjoy conventional 2-channel stereo audio

by connecting the unit’s AUDIO output(s) to a stereo

amplifier/receiver or television set, or when you

duplicate audio of a DVD VIDEO disc recorded with

surround audio to your MD,cassette, etc.

• 4:3 PS

(Pan Scan Conversion)

When you connect a normal TV to the unit.

When you play a wide picture recorded on a DVD

VIDEO disc, a portion of the picture is automatically

cut off from the left and right

sides of the image.

Depending on the disc, it may

NOTE

The Down mix function does not work when the 3D PHONIC

function is activated.

not be possible to playback in

this mode. In that case, the

picture is played back as in 4:3

mode.

COMPRESSION

You can compress the

dynamic range of the

sound if needed. Using

this function, you can

listen to sound at low

volumes easily.

• 16:9 WIDE (Wide Television screen)

AUDIO

DISPLAY

SYSTEM

LANGUAGE

When you connect a

wide-screen TV to the

unit.

DOLBY

_DIGITAL/PCM

Lo / Ro

DIGITAL AUDIO OUTPUT

DOWN MIX

COMPRESSION

EXIT

PRESS

KEY

• ON

SCREEN SAVER

Audio is played back with the dynamic range

compressed.

A television monitor screen may be burned out if a

static picture is displayed for a long time. To prevent

this, the unit automatically activates the screen saver

function if a static picture, such as an on-screen display

or menu, is displayed for over 5 minutes.

• OFF

Audio is played back as it was recorded.

NOTES

• MODE 1

The current picture gets

dark.

• The Compression function works only when playing back

a disc recorded with DOLBY DIGITAL 1CH or 2CH. The

setting is not effective for other discs.

AUDIO

DISPLAY

4:3 LB

SYSTEM

LANGUAGE

MONITOR TYPE

SCREEN SAVER

ON SCREEN GUIDE

OFF

• The Compression function does not work when the 3D

PHONIC function is activated.

• MODE 2

The “screen saver”

picture appears and its

brightness changes.

EXIT

PRESS

KEY

• OFF

The screen saver function is off.

NOTES

• The monitor screen of a projector or projection TV is

easily burned out if the screen saver mode is set to OFF

and a static picture is displayed for a long time.

• The screen saver function is not activated when the

selected disc is an Audio CD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial settings

ON SCREEN GUIDE

SYSTEM page

The unit can display “on-

screen guide” icons or

characters on the picture,

which show what is

happening to the disc or

the unit.

AUDIO

DISPLAY

4:3 LB

SYSTEM

LANGUAGE

MONITOR TYPE

SCREEN SAVER

ON SCREEN GUIDE

AUTO STANDBY

OFF

When the unit is stopped

for more than 30 minutes

or 60 minutes, the unit

enters standby mode

automatically.

(XV-521BK/523GD/525BK)

EXIT

AUDIO

DISPLAY

SYSTEM

LANGUAGE

PRESS

KEY

OFF

AUTO STANDBY

RESUME

DVD 1

AV COMPULINK MODE

• ON

EXIT

The on-screen guide will be displayed.

• 60

PRESS

KEY

Time is set to 60 minutes.

• OFF

The on-screen guide will not be displayed.

• 30

(XV-421BK)

Time is set to 30 minutes.

Examples of “on-screen guide” icons or characters:

AUDIO

DISPLAY

SYSTEM

LANGUAGE

OFF

AUTO STANDBY

RESUME

• OFF

The auto standby function

is off.

EXIT

PRESS

KEY

RESUME

You can select the resume

function to be on or off.

See page 19.

(XV-521BK/523GD/525BK)

AUDIO

DISPLAY

SYSTEM

LANGUAGE

OFF

AUTO STANDBY

RESUME

DVD 1

AV COMPULINK MODE

• ON

Pressing PLAY while

stopped or on standby

starts playback from the

resume point if it is

memorized.

EXIT

PRESS

KEY

(XV-421BK)

AUDIO

DISPLAY

SYSTEM

LANGUAGE

• OFF

OFF

AUTO STANDBY

RESUME

Pressing PLAY while

stopped or on standby

starts playback from the

beginning of the disc.

EXIT

PRESS

KEY

AV COMPULINK MODE (except XV-421BK)

If you use the AV

AUDIO

DISPLAY

SYSTEM

LANGUAGE

Compulink system, you

must set this item

correctly.

OFF

AUTO STANDBY

RESUME

DVD 1

AV COMPULINK MODE

Select from the three

options: “DVD1,” “DVD2”

and “DVD3” according to

the equipment to be

connected.

EXIT

PRESS

KEY

See page 41.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial settings

While

points [Set Level], use CURSOR

Limiting playback by

children

This function restricts playback of DVD VIDEO discs

which contain violent (and other) scenes according to

the level set by the user. For example, if a movie which

includes violent scenes supports the parental lock

feature, such scenes which you do not want to let

children view can be cut or replaced with other scenes.

2/3 to select the parental lock level.

PARENTAL LOCK

Country Code

Set Level

----

PASS WORD

EXIT

PRESS

KEY

ENTER

Each time you press CURSOR 2/3, the parental

level changes as follows:

To set Parental Lock for the first time

[PARENTAL LOCK]

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

–

+10

TV RETURN

TV 100+

“1” is the strictest level. “–” means no restriction.

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

Discs rated higher than the selected level are restricted.

SHIFT

^P3^LAY

STOP

Press ENTER.

1, 3, 5, 7

moves to [PASSWORD].

LEFT

CURSOR RIGHT

DOWN

2, 4

Enter your 4-digit password using the

numeric buttons (0 to 9).

REMOTE CONTROL

PARENTAL LOCK

7 While a DVD VIDEO disc is stopped or no disc is

Country Code

Set Level

inserted

----

PASS WORD

Press ENTER while holding down SHIFT.

The Parental Lock on-screen display appears on

EXIT

NEW PASSWORD? ··· PRESS 0~9 KEY.

the TV screen.

points [Country Code].

Press ENTER.

The parental level and password are set.

While

points [Country Code], use

moves to [EXIT].

CURSOR 2/3 to select “US” for country

Pressing ENTER again returns to the opening

display.

code.

PARENTAL LOCK

—

Country Coce

Set Level

----

PASS WORD

If you enter an undesired password in step 6 above, reenter the

password before pressing ENTER.

EXIT

PRESS

KEY

ENTER

Press ENTER.

moves to [Set Level].

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial settings

Even if you want to change only the country code

and/or parental level, do not forget to enter the

password after changing the country code and/or

parental level. Otherwise, the new country code

and/or parental level will not become effective.

To change the settings [PARENTAL LOCK]

TV POWER

THEATER

OPEN

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

DIGEST

STROBE

ZOOM

Pressing ENTER again returns to the opening

display.

2, 5

+10

TV RETURN

TV 100+

NOTES

AMP

VOL

SLOW

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

• When you enter the wrong password more than 3 times

SHIFT

in step 2 above,

moves to [EXIT] automatically and

^P3^LAY

CURSOR 5/∞ does not work.

• If you forget your password in step 2

Enter “8888.”

STOP

1, 2, 3,

4, 5

LEFT

CURSOR RIGHT

DOWN

3, 4

REMOTE CONTROL

To temporarily release the Parental lock

[PARENTAL LOCK]

You can change the Parental lock settings later.

TV POWER

OPEN

THEATER

/CLOSE 3D-PHONIC POSITION DVD POWER

SUBTITLE AUDIO

ANGLE TV/VIDEO

7 While a DVD VIDEO disc is stopped or no disc is

DIGEST

STROBE

ZOOM

inserted

Press ENTER while holding down SHIFT.

+10

TV RETURN

TV 100+

AMP

VOL

SLOW

The Parental Lock

PARENTAL LOCK

PLAY MODE DISPLAY RETURN

CANCEL TIME CHOICE

on-screen display

appears on the TV

screen.

SHIFT

Country Code

Set Level

^P3^LAY

----

PASS WORD

STOP

EXIT

NEW PASSWORD? ··· PRESS 0~9 KEY.

points

LEFT

CURSOR RIGHT

DOWN

[PASSWORD].

REMOTE CONTROL

Enter your current 4-digit password using the

numeric buttons (0 to 9) and press ENTER.

moves to [Country Code] if you enter the

correct password.

When you set the parental level strictly, some discs

may not be played back at all. When you insert such a

disc and try to play it, the following Parental Lock on-

screen display appears on the TV screen, asking you

whether you want the parental lock to be temporarily

released or not.

If you enter the wrong password, “WRONG!

RETRY……” appears on the TV screen, and you

cannot go to next step.

Use the CURSOR 5/∞ to move

then press ENTER.

to [YES],

To change the country code, use CURSOR 2/

3 to select the desired country code and

press ENTER.

moves to the

PASSWORD field.

PARENTAL LOCK

This DISC can’t play now!

Temporary

Level Change ?

moves to [Set Level].

YES

When selecting

[NO], press OPEN/

CLOSE to remove the

disc.

– – – –

PASSWORD

When you change the country code, you must

select the parental level.

PRESS ENTER

EXECUTE

To change the set level, use CURSOR 2/3 to

select the desired level while

Level], and then press ENTER.

moves to [PASSWORD].

points [Set

Enter your 4-digit password using the

numeric buttons (0 to 9).

If you enter the wrong password, “WRONG!

RETRY…” appears on the TV screen, and you

cannot go to next step.

Enter the password using the numeric

buttons (0 to 9) and press ENTER.

moves to [EXIT].

The Parental lock is released, and the unit starts

playback.

The password entered in the above step becomes

the new password. If you do not change the

password, enter the same password as in the step

NOTE

When you enter the wrong password more than 3 times in

step 2 above, moves to [NO] automatically and

CURSOR 5/∞ do not work.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional information

AV COMPU LINK remote control system (not available with

XV-421BK)

When you buy a separate TV, VCR, DVD player, receiver, or other component and

connect them to each other, you have to operate each component individually. JVC’s

AV COMPU LINK remote control system meets the demands of a system made up of

single components and has the ease of operation of a single unit.

Connection and setup

Using the AV COMPU LINK cable, connect the AV COMPU LINK terminals of each component to one another.

To AV COMPU LINK (II or EX)

DVD player

• If you connect a DVD player to a television via AV COMPU LINK, set the DVD player’s AV COMPU LINK setting as

follows.

• When connecting to VIDEO-1 input terminal of the television: DVD2

• When connecting to VIDEO-2 input terminal of the television: DVD3

To AV COMPU LINK (II or EX)

To AV COMPU LINK

VCR (Video Cassette Recorder)

DVD player

• If you connect a DVD player to a television and VCR via AV COMPU LINK, set the VCR’s Remote Control Code and

DVD player’s AV COMPU LINK setting as follows.

• When connecting to VIDEO-1 input terminal of the television:

DVD player’s AV COMPU LINK setting: DVD2

VCR’s Remote Control Code: B

• When connecting to VIDEO-2 input terminal of the television:

DVD player’s AV COMPU LINK setting: DVD3

VCR’s Remote Control Code: A

To AV COMPU LINK (II or EX)

Receiver

DVD player

• If you connect a DVD player to a television and receiver via AV COMPU LINK, set the DVD player’s AV COMPU LINK

setting to DVD1.

• The DVD player’s AV COMPU LINK setting is operated in the SYSTEM page of the preference display.

See page 38 for operation.

• For information on the connection between the TV and the Receiver, refer to the Receiver’s Instructions.

IMPORTANT!

If you connect the component video output to your TV:

• set the DVD player’s AV COMPULINK setting to DVD1.

• make the video/audio connection between the DVD player and your receiver using the supplied audio/video cable,

and do not make the S-VIDEO connection.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional information

Notes for connection

•

If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some

functions may not be performed automatically.

The AV COMPU LINK terminal on some televisions indicates “II.” Do not connect the terminal indicating “II”

with the AV COMPU LINK terminal on a receiver. If connected, the system will not work correctly.

Connect the AUDIO OUT jacks of the DVD player to the audio input jacks of a receiver that indicating “DVD.”

Otherwise, the system will not work correctly.

There may be no description about connections to a DVD player in the instruction manual of a television or VCR.

However a television or VCR with AV COMPU LINK terminals indicating “II” or “EX” can be connected to a DVD

player.

Operation

You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound

such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including not having to

perform power switching.

Turn on the main power of the television.

Insert a disc into the source component.

Press PLAY of the source component.

The following actions are performed automatically:

• Turning on the power for the television.

• Setting the source of the television to the external input (VIDEO-1 or VIDEO-2).

• Turning on the power for the receiver.

• Setting the source of the receiver to the component which has started playback.

Care and handling of discs

How to handle discs

When handling a disc, do not touch the surface of the disc.

Since discs are made of plastic, they are easily damaged.

If a disc gets dirty, dusty, scratched or warped, the images

and sound will not be picked up correctly, and such a disc

may cause the player to malfunction.

Label side

Do not damage the label side, stick paper to or use any adhesive on its surface.

Storage

Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases,

they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place

where the humidity or temperature is high. Avoid leaving discs in your car!

Maintenance of discs

If there are fingerprints or other dirt adhering to a disc,

wipe with a soft dry cloth, moving from the center outwards.

If a disc is difficult to clean, wipe with a cloth moistened with water.

Never use record cleaners, petrol, alcohol or any anti-static agents.

CAUTION

Sometimes during play noise or images may be garbled. This is sometimes due to the disc. (It may not be up to

industry standards.)

These symptoms are caused by the discs, not by the malfunction of the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional information

Troubleshooting

What appears to be a malfunction may not always be serious. Please go through the following list before requesting

service.

Symptom

Possible case

Remedy

Power does not come on.

Remote control does not work.

Power plug is not inserted securely.

Too far from the unit.

Plug in securely.

More closer to the unit.

The tip of the remote unit is not

pointed in the right direction.

Point the infrared light- emitting window

toward the remote sensor on the front panel.

Batteries are exhausted.

Replace the batteries with new ones.

Battery polarity is incorrect.

Take out the batteries and insert them again

in the correct direction.

No picture is displayed on the

monitor.

Connection of video cable is

incorrect.

Connect the cable correctly.

Input selection of TV is incorrect.

Disc is not playable.

Select correctly.

Use a playable disc. (See page 11.)

Picture is noisy.

The unit is connected to a VCR

directly and the copyguard function

is activated.

Connect the unit so that the picture signal

flows directly to the TV.

No audio is reproduced.

Connection is incorrect.

Check the connections.

Select correctly.

Input selection of amplifier is

incorrect.

No audio is reproduced when

playing back a DVD disc recorded unit's DIGITAL OUT.

with 96-kHz, linear PCM audio.

The audio signal is derived from the

Use the AUDIO OUT when playing back such

discs.

Sound is distorted or noise is

generated.

Disc is dirty.

Wipe the disc surface.

Picture does not fit the television MONITOR TYPE is not correctly set.

Select monitor type correctly. (See page 37.)

Set the television correctly.

screen.

Television is not correctly set.

Operation is not possible.

Microcomputer malfunction due to

lightning or static electricity.

Turn off the power and unplug the power

cord, then connect the power cord again.

Moisture condensation caused by a

sudden change of temperature or

humidity.

Turn off the power, then turn it on a few hours

later.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional information

Specifications

General

Readable discs:

Video format:

DVD VIDEO, Audio CD, Video CD

NTSC

Other

Power requirements:

Power consumption:

Mass:

AC 120V

, 60Hz

16 W (POWER ON), 3.0 W (STANDBY mode)

3.2 kg (7.1 lbs)

Dimensions (W x H x D):

XV-521BK/XV-523GD/XV-525BK:

435 x 95 x 297 mm

(17-3/16 x 3-3/4 x 11-3/4 inch)

XV-421BK:

435 x 95 x 288 mm

(17-3/16 x 3-3/4 x 11-3/8 inch)

Video output

COMPONENT (pin jacks):

Y Output:

1.0 Vp-p (75 Ω)

PB/PR Output: 0.7 Vp-p (75 Ω)

1.0 Vp-p (75 Ω)

VIDEO OUT (pin jack):

S-VIDEO OUT (S jack):

Y Output:

C Output:

500 Lines

65 dB

1.0 Vp-p (75 Ω)

286 mVp-p (75 Ω)

Horizontal resolution:

Signal to noise ratio:

Audio output

ANALOG OUT (pin jack):

2.0 Vrms (10 kΩ)

DIGITAL OUT:

COAXIAL:

OPTICAL:

0.5 Vp-p (75 Ω termination)

– 21 to –15 dBm (Peak) (except XV-421BK)

Audio characteristics

Frequency response:

(sampling frequency 44.1 kHz): 2 Hz to 20 kHz

DVD

(sampling frequency 48 kHz):

(sampling frequency 96 kHz):

2 Hz to 22 kHz

2 Hz to 44 kHz

Dynamic range:

16 bit: More than 98 dB

20 bit: More than 106 dB

24 bit: More than 106 dB

Unmeasurable (less than 0.002%)

Less than 0.002%

Wow and flutter:

Total harmonic distortion:

* Specifications and appearance subject to change without prior notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional information

Appendix A: Table of languages and their abbreviations

When you select the subtitle language or sound, the languages shown below are displayed as abbreviations. To

select the desired language, select the abbreviation corresponding the language you want to.

Kirundi

Rumanian

Russian

Kinyarwanda

Sanskrit

Sindhi

Sangho

Serbo-Croatian

Singhalese

Slovak

Afar

Inupiak

Abkhazian

Afrikaans

Ameharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali, Bangla

Tibetan

Indonesian

Icelandic

Hebrew

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Korean (KOR)

Kashmiri

Kurdish

Slovenian

Samoan

Shona

Somali

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swedish

Swahili

Tamil

Kirghiz

Latin

Lingala

Breton

Catalan

Corsican

Czech

Welsh

Danish

Bhutani

Greek

Esperanto

Estonian

Basque

Persian

Finnish

Fiji

Faroese

Frisian

Laothian

Lithuanian

Latvian, Lettish

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay (MAY)

Maltese

Burmese

Nauru

Nepali

Dutch

Norwegian

Occitan

(Afan) Oromo

Oriya

Panjabi

Polish

Pashto, Pushto

Portuguese

Quechua

Rhaeto-Romance

Telugu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Setswana

Tonga

Turkish

Tsonga

Tatar

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Wolof

Xhosa

Yoruba

Zulu

Hindi

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional information

Appendix B: Country code list for parental lock

This list is used for the parental Lock operation. For details, see page 39.

Spain

Andorra

Saudi Arabia

Solomon Islands

Seychelles

Lebanon

Ethiopia

Finland

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Saint Lucia

Liechtenstein

Sri Lanka

Liberia

Fiji

Sudan

Falkland Islands

(Malvinas)

Sweden

Albania

Singapore

Lesotho

Micronesia

Armenia

Saint Helena

Slovenia

Lithuania

Luxembourg

Latvia

(Federated States of)

Netherlands Antilles

Angola

Faroe Islands

France

Svalbard and Jan Mayen

Slovakia

Antarctica

Argentina

American Samoa

Austria

Libyan Arab Jamahiriya

Morocco

France, Metropolitan

Gabon

Sierra Leone

San Marino

Senegal

Monaco

United Kingdom

Grenada

Moldova, Republic of

Madagascar

Marshall Islands

Mali

Australia

Somalia

Georgia

Aruba

Suriname

French Guiana

Ghana

Azerbaijan

Bosnia and Herzegovina

Barbados

Sao Tome and Principe

El Salvador

Syrian Arab Republic

Swaziland

Myanmar

Mongolia

Macau

Gibraltar

Greenland

Gambia

Bangladesh

Belgium

Northern Mariana

Islands

Turks and Caicos Islands

Chad

Guinea

Burkina Faso

Bulgaria

Guadeloupe

Equatorial Guinea

French Southern

Territories

Martinique

Mauritania

Montserrat

Malta

Bahrain

Greece

Togo

Burundi

South Georgia and the

South Sandwich Islands

Thailand

Tajikistan

Tokelau

Turkmenistan

Tunisia

Benin

Mauritius

Maldives

Bermuda

Guatemala

Guam

Brunei Darussalam

Bolivia

Malawi

Guinea-Bissau

Mexico

Brazil

Guyana

Tonga

Malaysia

Bahamas

Hong Kong

East Timor

Turkey

Mozambique

Namibia

Bhutan

Heard Island and

McDonald Islands

Bouvet Island

Botswana

Belarus

Trinidad and Tobago

Tuvalu

New Caledonia

Niger

Honduras

Croatia

Haiti

Taiwan, Province of

China

Norfolk Island

Nigeria

Belize

Canada

Hungary

Indonesia

Ireland

Tanzania, United

Republic of

Nicaragua

Netherlands

Norway

Cocos (Keeling) Islands

Central African Republic

Congo

Ukraine

Israel

Uganda

Nepal

Switzerland

Côte d’Ivoire

Cook Islands

Chile

India

United States Minor

Outlying Islands

Nauru

British Indian Ocean

Territory

Niue

United States

Uruguay

New Zealand

Oman

Iraq

Cameroon

China

Iran (Islamic Republic of)

Iceland

Uzbekistan

Panama

Vatican City State

(Holy See)

Peru

Colombia

Italy

French Polynesia

Papua New Guinea

Philippines

Pakistan

Costa Rica

Cuba

Saint Vincent and the

Grenadines

Jamaica

Jordan

Cape Verde

Christmas Island

Cyprus

Venezuela

Japan

Virgin Islands (British)

Virgin Islands (U.S.)

Kenya

Poland

Kyrgyzstan

Cambodia

Kiribati

Saint Pierre and

Miquelon

Czech Republic

Germany

Vietnam

Vanuatu

Pitcairn

Djibouti

Wallis and Futuna

Islands

Comoros

Puerto Rico

Portugal

Palau

Denmark

Saint Kitts and Nevis

Korea, Democratic

People’s Republic of

Dominica

Samoa

Dominican Republic

Algeria

Yemen

Paraguay

Qatar

Mayotte

Yugoslavia

South Africa

Zambia

Korea, Republic of

Kuwait

Ecuador

Réunion

Estonia

Cayman Islands

Kazakhstan

Romania

Russian Federation

Rwanda

Egypt

Western Sahara

Eritrea

Lao People’s Democratic

Republic

Zaire

Zimbabwe

Download from Www.Somanuals.com. All Manuals Search And Download.

QUALITY

SERVICE

HOW TO LOCATE YOUR JVC SERVICE CENTER

TOLL FREE : 1-800-537-5722

http://www.jvcservice.com

Dear customer:

In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit. In the event

that repair is necessary, or for the address nearest your location, please refer to the factory service center list below or within

the Continental United States, Call 1-800-537-5722 for your authorized servicer. Remember to retain you Bill of Sale for

Warranty Service.

—JVC

JVC SERVICE & ENGINEERING

COMPANY OF AMERICA

DIVISION OF JVC AMERICAS CORP.

FACTORY SERVICE CENTER LOCATIONS

705 Enterprise Street

Aurora, IL 60504-8149

(630) 851-7855

10 New Maple Avenue

Pine Brook, NJ 07058-9641

(973)396-1000

1500 Lakes Parkway

Lawrenceville, GA 30243-5857

(770) 339-2582

10700 Hammerly, Suite 110

Houston, TX 77043

(713) 935-9331

5665 Corporate Avenue

Cypress, CA 90630-0024

(714) 229-8011

2969 Mapunapuna Place

Honolulu, HI 96819-2040

(808) 833-5828

890 Dubuque Avenue

South San Francisco, CA 94080-1804

(650) 871-2666

13 Cummings Park

Woburn, MA 01801

(781)376-9100

8192 State Road 84

Davie, FL 33324

(954) 472-1960

Sophisticatedelectronicproductsmayrequireoccasionalservice.Justasqualityisakeywordintheengineeringandproduction

of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous.

The JVC service and engineering organization stands behind our products.

NATIONAL HEADQUARTERS

JVC SERVICE & ENGINEERING COMPANY OF AMERICA

DIVISION OF JVC AMRICAS CORP.

1700 Valley Road

Wayne, NJ 07470

If you ship the product • • •

Don’t service it yourself.

Pack your JVC unit in the original carton or one of

equivalent size and strength. Enclose, with the unit, a

letterstatingtheproblemorsymptomthatexistsandalso

CAUTION

a copy of the receipt or bill of sale you received when you

purchasedyourJVCunit. Printyourhomereturnaddress

on the outside and the inside of the carton. Send to the

appropriate JVC Factory Service Center as listed above.

To prevent electrical shock, do not open the cabinet. No user

serviceable parts inside.

Refer servicing to qualified service personnel.

ACCESSORIES

To purchase accessories for your JVC product, you may contact your local JVC Dealer.

Or from the 48 Continental United States call toll free : 800-882-2345

(1099)

BT-51005-4

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY CONSUMER VIDEO 1-90

JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL

PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail

purchase for the period as shown below. (“The Warranty Period.”)

PARTS

LABOR

1 YR

90 DAYS

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY(50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN

COMMONWEALTH OF PUERTO RICO.

WHAT WE WILL DO:

If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such

repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers.

Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be

brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and

above which are covered on an in-home basis.

WHAT YOU MUST DO FOR WARRANTY SERVICE:

Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized

service center, please call toll free: (800)537-5722.

If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of

your bill of sale plus and letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location

of which will be given to you by the toll-free number.

If you have any questions concerning your JVC Product, please contact our Customer Relations Department.

WHAT IS NOT COVERED:

This limited warranty provided by JVC does not cover:

1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty

installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to

render such service, or if affixed to any attachment not provided with the products, or if the model number or serial number

has been altered, tampered with, defaced or removed;

2. Initial installation and installation and removal for repair;

3. Operational adjustments covered in the Owner’s Manual, normal maintenance, video and audio head cleaning;

4. Damage that occurs in shipment, due to act of God, and cosmetic damage;

5. Signal reception problems and failures due to line power surge;

6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus(Needle) are covered for 90 days from the date of purchase;

7. Accessories;

8. Batteries (except the Rechargeable Batteries are covered for 90 days from the date of purchase);

There are no express warranties except as listed above.

THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARCHANTABILITY, IS

LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.

JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER

DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO

TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH

OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET

FORTH ABOVE.

Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied

warranty last, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you

may also have other rights which vary from state to state.

JVC COMPANY OF AMERICA

DIVISION OF JVC AMERICAS CORP.

1700 Valley Road

Wayne, NJ 07470

REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF

REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION

PACKAGED WITH EACH REFURBISHED PRODUCT.

For customer use:

Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet. Retain this

information for future reference.

Model No.:

Serial No.:

Purchase date:

Name of dealer:

Download from Www.Somanuals.com. All Manuals Search And Download.

VICTOR COMPANY OF JAPAN, LIMITED

0300RIMUBNJSC

EN.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Flat Panel Television DTV 172A User Manual
Intel Switch 10 100 User Manual
JVC Blu ray Player HR DVS1MS User Manual
JVC DVD Recorder DR M150SEK User Manual
JVC Flat Panel Television PD 42WX84 User Manual
JVC Home Theater System UX G6 User Manual
Kambrook Blender KSB7 User Manual
Kenwood Blood Glucose Meter DDX8046BT User Manual
Keys Fitness Treadmill PRO 750 User Manual
KitchenAid Cooktop W10440551A User Manual