AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 1
For models:
AV-36360
AV-36330
AV-36320
AV-36S36
AV-36S33
AV-32360
AV-32330
AV-32320
AV-32S36
AV-32S33
COLOR TELEVISION
USER'S GUIDE
Illustration of AV-32360 and RM-C254
PLEASE NOTE
This web based PDF File for this instruction book is not an exact replica
of the instruction book that comes with the TV.
IMPORTANT NOTE TO THE CUSTOMER
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user's guide in a convenient place for future reference. Keep the carton and
original packaging for future use.
Serial Number
Model Number
LCT1135-001B-A
0602-TN-FAA-JIM
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 3
IMPORTANT SAFEGUARDS
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions. This TV set has been engineered and
manufactured to assure your personal safety. But improper use can result in potential electrical
shock or fire hazards. In order not to defeat the safeguards incorporated in this TV set, observe
the following basic rules for its installation, use and servicing.
And also follow all warnings and instructions marked on your TV set.
INSTALLATION
1 Your TV set is equipped with a polarized AC line plug (one blade
of the plug is wider than the other). This safety feature allows
the plug to fit into the power outlet only one way. Should you be
unable to insert the plug fully into the outlet, try reversing the
plug. Should it still fail to fit, contact your electrician.
(POLARIZED-TYPE)
2 Operate the TV set only from a power source as indicated on the TV set or refer to the oper-
ating instructions for this information. If you are not sure of the type of power supply to your
home, consult your TV set dealer or local power company. For battery operation, refer to the
operating instructions.
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords
and broken plugs. They may result in a shock or fire hazard. Call your service technician for
replacement.
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set
where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.
5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near swimming pool, etc.
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built-up static charges. Section
810 of the National Electrical Code provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna discharge unit, connection require-
ments for the grounding electrode.
IMPORTANT RECYCLING INFORMATION
This product utilizes both a Cathode Ray Tube (CRT) and other com-
ponents that contain lead. Disposal of these materials may be regu-
lated in your community due to environmental considerations. For
disposal or recycling information, please contact your local authori-
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 4
7 An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during
operation to be released.
Therefore:
— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,
rug, etc.
— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat register.
9 To avoid personal injury:
— Do not place a TV set on a sloping shelf unless properly secured.
— Use only a cart or stand recommended by the TV set manufacturer.
— Do not try to roll a cart with small casters across thresholds or deep pile carpets.
— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
USE
10 Caution children about dropping or pushing objects into the TV set through cabinet open-
ings. Some internal parts carry hazardous voltages and contact can result in a fire or elec-
trical shock.
11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol
cleaner.
12 Never add accessories to a TV set that has not been designed for this purpose. Such addi-
tions may result in a hazard.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 5
13 For added protection of the TV set during a lightning storm or when the TV set is to be left
unattended for an extended period of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to product due to lightning storms or power line surges.
14 A TV set and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the TV set and cart combination to overturn.
SERVICE
15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the operating instructions. Adjust
only those controls that are covered in the operating instructions as improper adjustment
of other controls may result in damage and will often require extensive work by a quali-
fied technician to restore the TV set to normal operation.
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance — this indicates a need for
service.
16 Do not attempt to service this TV set yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service person-
nel.
17 When replacement parts are required, have the service technician verify in writing that the
replacement parts he uses have the same safety characteristics as the original parts. Use
of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.
18 Upon completion of any service or repairs to this TV set, please ask the service technician
to perform the safety check described in the manufacturer’s service literature.
19 When a TV set reaches the end of its useful life, improper disposal could result in a picture
tube implosion. Ask a qualified service technician to dispose of the TV set.
20 Note to CATV system installer.
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 6
Table of Contents
UNPACKING YOUR TV . . . . . 7
Onscreen Menus (Cont.)
Sound Settings . . . . . . . . . . . . . 39
Bass . . . . . . . . . . . . . 39
Treble. . . . . . . . . . . . . . 39
Balance. . . . . . . . . . . . . 39
MTS (Multi-channel Sound . . 39
General Items . . . . . . . . . . . . . . 40
On/Off Timer . . . . . . . . . . 40
Closed Caption . . . . . . . . 41
Front Panel Lock . . . . . . . 41
Auto Shut Off . . . . . . . . 42
XDS ID . . . . . . . . . . . . 42
V2 Component-In/
TV Models and
Remote Controls . . . . . . . . 8
Quick Setup Guide . . . . . . . 11
Connections . . . . . . . . . . 14
Cable and VCR Connections . . . . . . . 14
Connecting to a DVD Player . . . . . . . 17
Connecting to an External Amplifier . . . 18
V1 Component-In . . . . . . . 42
Connecting to a Camcorder . . . . . . . 18
Remote Control . . . . . . . . . 19
Remote Control Basics . . . . 19
Changing the Batteries . . . . . 19
BUTTON FUNCTIONS . . . . . 43
Menu . . . . . . . . . . . . . . . . . . 43
Exit and PIP Off . . . . . . . . . . . . . 43
Display . . . . . . . . . . . . . . . . . . 43
Video Status . . . . . . . . . . . . . . . 44
Sleep Timer . . . . . . . . . . . . . . . 44
Hyper Surround . . . . . . . . . . . . . 44
Muting . . . . . . . . . . . . . . . . . . 44
100+ . . . . . . . . . . . . . . . . . . . 45
Return+ . . . . . . . . . . . . . . . . . 45
Input . . . . . . . . . . . . . . . . . . . 45
VCR Buttons . . . . . . . . . . . . . . . 46
DVD Buttons . . . . . . . . . . . . . . . 46
TV/CATV Switch . . . . . . . . . . . . . 46
VCR/DVD Switch . . . . . . . . . . . . 46
PIP (Picture-In-Picture) . . . . . . . . . 47
Introduction . . . . . . . . . . 47
Remote Programming . . . . . 20
CATV and Satellite Codes . . . . . . . . 20
VCR Codes . . . . . . . . . . . . . . . 21
DVD Codes . . . . . . . . . . . . . . . 22
Onscreen Menus . . . . . . . . 23
Using the Guide . . . . . . . . . . . . . 23
Onscreen Menu System . . . . . . . . . 24
Plug In Menu . . . . . . . . . . . . . . 25
Introduction . . . . . . . . . . 25
Language . . . . . . . . . . . 25
Auto Tuner Setup . . . . . . . 25
Auto Clock Set . . . . . . . . . 26
Manual Clock Set . . . . . . . 27
Channel Summary . . . . . . . . . . . . 28
V-Chip . . . . . . . . . . . . . . . . . . 29
US V-Chip Ratings . . . . . . . 30
Viewing Guidelines . . . . . . 30
Setting US V-Chip Ratings . . . 31
Movie Ratings . . . . . . . . . 33
Set Movie Ratings . . . . . . . 33
Canadian V-Chip Ratings . . . 34
Set Canadian V-Chip Ratings . 34
Unrated Programs . . . . . . . 35
Set Lock Code . . . . . . . . . 36
Picture Settings . . . . . . . . . . . . . 37
Tint . . . . . . . . . . . . . . 37
Color . . . . . . . . . . . . . 37
Picture . . . . . . . . . . . . . 37
Bright . . . . . . . . . . . . . 37
Detail . . . . . . . . . . . . . 37
Noise Muting . . . . . . . . . . 38
On/Move . . . . . . . . . . . 47
Freeze . . . . . . . . . . . . . 48
Swap . . . . . . . . . . . . . 48
Channel +/- . . . . . . . . . . 48
Source . . . . . . . . . . . . 48
EZ-Surf . . . . . . . . . . . . 48
APPENDICES
Troubleshooting . . . . . . . . . . . . . 49
Warranty . . . . . . . . . . . . . . . . . 50
Authorized Service Centers . . . . . . . 52
Search Codes . . . . . . . . . . . . . . 53
Specifications . . . . . . . . . . . . . . 54
Note . . . . . . . . . . . . . . . . . . . 55
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 7
Unpacking Your Television
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new
television, please check to make sure you have all of the following items. In addition to this
guide, your television box should include:
1 Remote
Control
Two AA
Batteries
1 Television
A matching TV stand
is also available
(optional).
Note:Your television
and/or remote control
may differ from the
examples illustrated
here.
INPUT
MONO
2
AUDIO
VIDEO
L
R
Once you have unpacked your television, the next step is to connect it to your
antenna/cable or satellite system and to connect the audio/video devices you want to use
with your television. To make these connections you will use plugs like the ones illustrated
A/V Input Plug
RF Connectors
Used to connect
Used to connect a
coaxial cable from an
external antenna or
Cable TV system.
audio/video devices like
VCRs, DVD players,
stereo amplifiers, game
consoles, etc.
S-Video Plug
Used to make video con-
nections with VCRs,
DVDs, Camcorders, etc
(optional).
We recommend that before you start using your new television, you read your entire User’s
Guide so you can learn about your new television’s many great features. But if you’re anxious
to start using your television right away, a quick setup guide follows on pages 11 - 13.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 8
TV Models and Remotes Guide
NOTE: Before you connect your televison to another device, please refer to the proper dia-
grams for your TV and remote, depending on the model that you have purchased.
These will help assist you in understanding how to connect your television to another
device, as well as use the remote to set up your televison.
Rear Panel Diagrams
MODELS: AV-36360, AV-36330, AV-36S36, AV-36S33, AV-32360, AV-32330, AV-32S36 and
AV-32S33
MODELS: AV-36320 and AV-32320
8
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 9
TV Models and Remotes Guide
Front Panel Diagrams
MODELS: AV-36360, AV-36330, AV-36S36 and AV-36S33
MODEL: AV-36320
MODELS: AV-32360, AV-32330, AV-32S36 and AV-32S33
MODEL: AV-32320
9
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 10
TV Models and Remotes Guide
VIDEO
STATUS
SLEEP
TIMER
POWER
INPUT
DISPLAY
1
2
3
6
4
5
8
0
7
9
100+
RETURN+
MUTING
V—CHIP
+
CH
VOL
VOL
+
CH
MENU
VCR CONTROL
EXIT
CHANNEL
POWER TV/VCR
REW
PLAY
FF
PAUSE
REC
STOP
RM-C205
Remote Control RM-C255
Remote Control RM-C205
Remote Control RM-C254
MODELS: AV-36330,
AV-36S33,
AV-32330,
MODELS: AV-36320,
AV-32320
MODELS: AV-36360,
AV-36S36,
AV-32360,
AV-32S33
AV-32S36
10
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 11
Quick Setup 1
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. This information includes basic instructions
on operating your remote control, making a simple cable/antenna and optional VCR connection
and, finally, information on programming your television's Auto Tuner.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Step One - The Remote Control
The remote control is the key to operating your television's many great features. Before you
can operate your remote control, you first need to install the batteries (included).
For RM-C255 and RM-C254, lift and pull the latch on the back of the remote to open. For
RM-C205, raise the latch on the remote’s back cover to remove. Insert two batteries (included)
carefully noting the “+” and “–” markings, placing the “–” end in the unit first. Snap the cover
back into place.
RM-C255 and RM-C254
RM-C205 ONLY
Basic Operation
POWER
Turn the television on and off by pressing the POWER button at the top right corner of
the remote.
The four key feature buttons at the center of the remote can be
used for basic operation of the television. The top and bottom
buttons will scan forward an back through the available chan-
nels. The right and left buttons will turn the volume up or down.
These buttons are also marked with four arrows and are also
used with JVC's onscreen menu system. You will need to use
these buttons later in the Quick Setup.
The next step is to connect your television to an antenna or
cable.
Note: Illustration of remote control RM-C254
11
Proceed to Step Two
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 12
Quick Setup 2
Step Two - Making Basic Connections
Next you will need to connect your television to an antenna or cable system. The most basic
antenna/cable connection is shown below. For more detailed connections, such as ones where
a cable box is required, see pages 15 to 16.
WALL
CABLE or ANTENNA
OUT
Cable/RF connector
Illustration of AV-32360
1) Connect an RF cable out from the wall outlet in to the RF Input on the back of the TV.
You may also wish to connect a VCR at this point. A basic VCR connection is shown below.
For detailed instructions on connecting a other components or a home theater system, see
pages 15 to 17.
Note: A VCR is not required to operate your television.
VCR
AV Cables/Plugs
IN
OR
OR
Illustration of AV-32360
1) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input
jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video
input.
2) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left
Audio Input Jack.
3) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right
Audio Input jack.
Finally, once you have finished your connections, plug the power cord into the nearest power
outlet and turn on the television.
Proceed to Step Three
12
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 13
Quick Setup 3
Step Three - The Plug In Menu
When you turn your television on for the first time the Plug In Menu will appear. This menu sets
some of the basic settings for your television. A complete description of the Plug In Menu can
be found starting on page 25. We recommend you complete the Plug In Menu items before you
start using your television. But to begin watching your television right away you only need to
run the Auto Tuner Setup. This lets your television learn the channels it is able to receive. To
run the Auto Tuner Setup follow the steps below.
Press the
SETUP
‚
button to move to AUTO TUNER
¥ŠꢀꢀTo choose CABLE (if you are connected to a
cable system) or AIR (if you use an antenna) or
SKIP (if you need to)
‚ꢀ To move to START
The Auto Tuner will now memorize all of the clear, active channels your television can receive.
This will take one or two minutes.
The Auto Tuner is finished when the message PROGRAMMING OVER! appears onscreen.
Your Quick Setup is now complete. You can now begin watching your television, or you can
continue on in this guide for more information on connecting audio/video devices, programming
your remote control, or using the JVC onscreen menu system to customize your television
viewing experience.
The Quick Setup is complete
STOP
13
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 14
Connections
Cable and VCR Connections
There are three basic types of antenna or cable connections:
• If you have an antenna or have a cable system that does not require you use a cable box
to select channels, please refer to Diagram #1.
• If you have a cable system that requires the use of a cable box to access all the channels,
please refer to Diagram #2. If you cannot operate your Picture-In-Picture function using
Diagram #2, try the connection shown in Diagram #3. It is possible your cable box allows
the signal of only one channel at a time to be sent to your television.
• If you have a cable system that requires the use of a cable box to access certain premium
channels, but not “basic” cable channels, please refer to Diagram #3.
• For your convenience, connection to a VCR is also shown in the following diagrams. A
VCR is not necessary for operation of the television or Picture-In-Picture (PIP) func-
tion. You may omit the VCR from your connections if you wish.
• For instructions on connecting a VCR only, please see the Quick Setup on page 12.
• For information on using PIP, please see page 47.
• The PIP feature is available on AV-36360, AV-36S36, AV-32360 and AV-32S36 models
only.
WALL
CABLE or ANTENNA
Diagram #1
OUT
TWO-WAY
SPLITTER
VCR
OR
OR
Illustration of AV-32360
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way
splitter.
2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the RF Input on
the back of the VCR.
3) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the
back of the TV.
4) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input
jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video
input.
5) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left
Audio Input Jack.
6) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right
Audio Input jack.
• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s
Left Audio Input.
• Please consult your VCR’s owner’s manual for more information on its operation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 15
Connections
Cable and VCR Connections - Continued
Diagram #2
WALL
CABLE or ANTENNA
OUT
CABLE BOX
VCR
OR
OR
Illustration of AV-32360
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable
box.
2) Connect an RF cable from the RF Output of the cable box, in to the RF Input on the back of
the VCR.
3) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the
TV.
4) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input
jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video
input.
5) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left
Audio Input Jack.
6) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right
Audio Input jack.
• Please see page 47 for information on using the PIP feature with a Cable Box.
• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s
Left Audio Input.
• Please consult your VCR’s owner’s manual for more information on its operation.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 16
Connections
Cable and VCR Connections - Continued
Diagram #3
WALL
CABLE or ANTENNA
TWO-WAY
SPLITTER
OUT
VCR
IN
OR
OR
Illustration of AV-32360
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way
splitter.
2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the cable box RF
Input.
3) Connect an RF cable from the Cable Box Output, in to the VCR RF Input.
4) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the
back of the TV.
5) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input
jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video input.
6) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio
Input jack.
7) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio
Input jack.
• Please see page 47 for information on using the PIP feature with a Cable Box.
• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s
Left Audio Input.
• Please consult your VCR’s owner’s manual for more information on its operation.
The connection diagrams are intended to show some basic general connections.
Some cable companies may require special connections to properly use your televi-
sion or 2-tuner PIP function. If you follow these diagrams and either the television or
PIP does not work properly, contact your local cable operator for more connection
information. Please see page 47 for more information on the PIP feature.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 17
Connections
Connecting to a DVD player
DVD Player
AUD
Green
Blue
Red
Illustration of AV-32360
1) Connect Green cable out from DVD player “Y” Component Output, in to TV “VIDEO/Y”
Component Input.
2) Connect Blue cable out from DVD player “PB” Component Output, in to TV “PB” Component
Input.
3) Connect Red cable out from DVD Player “PR” Component Output, in to TV “PR” Component
Input.
4) Connect White Audio cable out from DVD Left Audio Output, in to TV Left Audio Input 2.
5) Connect Red Audio cable out from DVD Right Audio Output, in to TV Right Audio Input 2.
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors, please consult the user’s manual for your DVD Player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or Audio Output) before starting the other to avoid accidentally
switching the cables.
• See page 22 for instructions on programming your remote control to operate the basic func-
tions of your DVD player.
• AV-36360, AV-36330, AV-36S36, AV-36S33, AV-32360, AV-32330, AV-32S36, AV-32S33: If
you use Input 2 (Component-In) for the DVD connection, you must set the
V2 COMPONENT-IN on the initial Setup Menu to “YES” for proper display of the DVD sig-
nal.
• AV-36320 and AV-32320: If you use Input 1 for the DVD connection, you must set the V1
COMPONENT-IN on the initial Setup Menu to “YES” for proper display of the DVD signal.
NOTE: Progressive DVD Players (players with an output scan of 31.5 KHz) will not work prop-
erly with this television.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 18
Connections
Connecting to an External Amplifier
Illustration of AV-32360
1) Connect the white audio cable from the TV’s Left Audio Output jack to the Amplifier’s Left
Audio Input jack.
2) Connect the red audio cable from the TV’s Right Audio Output jack to the Amplifier’s Right
Audio Input jack.
Connecting to a Camcorder
You may connect a camcorder to your television by using the front Input Jacks (Input 2 or
Input 3) located under the front panel door. To access, pull on the door to open it (36 inch
models only). You may also connect a game console or other equipment using these jacks.
Camcorders may also be connected to the television’s rear input jacks.
Illustration of AV-32360
1) Connect the yellow video cable out from the Camcorder’s Video Output, in to the TV’s
Video
Input jack.
2) Connect the white audio cable out from the Camcorder’s Left Audio Output, in to the TV’s
Left Audio Input Jack.
3) Connect the red audio cable out from the Camcorder’s Right Audio Output, in to the TV’s
Right Audio Input Jack.
• If your Camcorder is a mono sound model it will have only one audio jack. Connect it to the
TV’s Left Audio Jack.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 19
Remote Control
Remote Control Basics
• Before you can operate the remote control, you must first
install the batteries (included). See “Changing the Batteries”
at the bottom of this page for instructions. (For an illustra-
tion, please see page 11.)
• Press the POWER button to turn the television on or off.
• Make sure the TV/CATV switch is set to TV. Move the switch
to CATV only if you need to operate a cable box.
• Slide the VCR/DVD selector switch to VCR to control a
VCR, slide to DVD to control a DVD player. Please see
pages 20 to 22 for instructions on programming your remote
control to
operate a Cable box, VCR or DVD player.
• Press the CH+ and CH- buttons to scan through the chan-
nels. Tap the CH+ or CH- button to move through the chan-
nels one channel at a time.
• To move rapidly through the channels using JVC’s
Hyperscan feature, press and hold CH+ or CH-. The chan-
nels will zip by at a rate of five channels per second.
• Press VOL+ or VOL - to raise or lower the volume. An indica-
tor bar will appear onscreen to show you the television vol-
ume level.
• The CH+/- and VOL+/- buttons are also used to navigate
JVC’s onscreen menu system.
• You can directly access specific channels using the 10-key
pad.
• For more information on remote control button features, see
pages 43 to 48. For information on using the onscreen
menus, see page 23.
Notes: Remote control model RM-C254 is shown at the left.
A different model remote control may have come with your
television.
Changing the Batteries
For RM-C255 and RM-C254, lift and pull the latch on the back of the remote to open. For
RM-C205, Raise the latch on the remote’s back cover to remove.
Insert two AA batteries (supplied), carefully noting the "+" and "-" markings on the batteries and
on the remote control. To avoid a potential short circuit, insert the "-" end first. Be sure to use
only size AA batteries. When batteries are installed, snap the cover back into place (until it
clicks into position).
• If the remote control acts erratically, replace the batteries. Typical battery life is six months to
one year. We recommend using alkaline batteries for longer battery life.
When you change the batteries, try to complete the task within three minutes. If you take
longer than three minutes, the remote control codes for your VCR, DVD, and/or Cable
Box may have to be reset, except for RM-C205 (see page 20-22).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 20
Remote Programming
Setting the CATV, VCR and DVD Codes
You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond
to any of the codes listed below or to the code search function, use the remote control sup-
plied by the manufacturer.
NOTE: The RM-C205 remote control can only operate JVC-brand devices.
Cable Box or Satellite codes
The remote control is programmed with CATV and/or Satellite codes for power on, power off,
channel up, channel down, and 10 key operation.
1) Find the CATV/Satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to “CATV”.
3) Press and hold down the DISPLAY button.
4) With the DISPLAY button held down, enter the first code number listed using the 10 key pad.
5) Release the DISPLAY button.
6) Confirm the operation of the Cable Box/Satellite receiver.
• If your CATV or Satellite box does not respond to the first code, try the others listed. If it does
not respond to any code, try the Search Codes Function, on page 53.
Cable Box
ABC
CODES
024
Cable Box
Puser
CODES
032
Digital
Satellite
Systems
CODES
Archer
032, 025
051, 032
022, 051
058, 059
024, 032, 025
029
RCA
061, 070
032
Echostar
100, 113, 114,
115
Cableview
Citizen
Realistic
Regal
058, 064, 040,
041, 042, 045,
068
Express VU
G.E.
100, 113
Curtis
106
Diamond
Eagle
Regency
034
G.I.
108
Rembrandt
037, 032, 051,
038
Gradiente
Hitachi
112
Eastern
GC Brand
Gemini
034
032, 051
022, 043
104, 111
Samsung
051
HNS (Hughes)
Scientific Atlanta 057, 058, 059
104
General Instrument 065, 024, 025,
026, 027, 020,
SLMark
051, 047
051, 056
032, 051
Panasonic
Philips
105
Sprucer
Stargate
102, 103
021, 022, 057,
023
Primestar
108
Hamlin
040, 041, 042,
045, 058, 064
049, 024
Telecaption
Teleview
Texscan
Tocom
067
Proscan
RCA
106, 109, 110
106, 109, 110
Hitachi
Jerrold
047, 051
044
065, 024, 025,
026, 027, 020,
021, 022, 057,
023
Sony
107
035, 036, 066
050
Star Choice
104, 108
Toshiba
Unika
Toshiba
Uniden
101
Macom
049, 050, 051,
054
102, 103
032, 025
Universal
Videoway
Viewstar
Zenith
022, 032
052
Magnavox
033
030
Memorex
Movietime
029, 030
063, 046
046
032, 051
039, 037, 048
Oak
Panasonic
055, 056, 060,
071, 073
Zenith/Drake
Satellite
Paragon
Philips
063
028, 029, 030,
052, 053, 031,
069
Pioneer
Pulsar
047, 062
051, 032
20
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 21
Remote Programming
VCR codes
The remote control is programmed with VCR codes for power on, power off, play, stop, fast-for-
ward, rewind, pause, record, channel up, and channel down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
3) Press and hold down the DISPLAY button.
4) With the DISPLAY button held down, enter the first code number listed with the 10 key pad.
5) Release the DISPLAY button.
6) Confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to
any code, try the Search Codes Function, on page 53.
• Some manufacturer’s VCR’s may not respond to the TV/VCR button, even if other buttons
work properly.
• To record, hold down the REC button on the remote and press PLAY.
VCRs
CODES
035
027, 032, 095
VCRs
CODES
VCRs
CODES
Admiral
Aiwa
Marantz
Marta
003, 004, 005
064
Samsung
037, 060, 062,
033, 089
089
Samtron
Sansui
Akai
029, 072, 073, Memorex
074
024, 067
003, 026, 020,
052
038, 040, 047,
048, 041, 042
MGA
Audio Dynamic 003, 005
Sanyo
Scott
063, 067, 091,
071
059, 060, 062,
067, 038, 040,
047, 048, 026,
020
Bell & Howell
Broksonic
Canon
063, 071
020, 026, 094
023, 025
043
Minolta
058, 045, 093
Mitsubishi
038, 040, 047,
048, 041, 042,
078, 090
CCE
Multitech
NEC
047, 027, 062
Citizen
064
003, 004, 005,
000
024, 023
Sears
063, 064, 065,
066, 058, 000,
001
Craig
063, 029, 064
Curtis Mathes
045, 024, 027,
093
043, 059, 024,
092
Olympic
Shintom
Sharp
075
Optimus
028, 021, 035,
064
026, 020
Daewoo
035, 036, 080,
088
Orion
Panasonic
DBX
003, 004, 005
Signature 2000 027, 035
023, 024, 021,
022
024, 058, 045,
063, 003, 004,
005, 093
Dimensia
Emerson
045, 093
Singer
Sony
075
043, 026, 077,
061, 025, 042,
020, 076
Penney
028, 029, 030,
053, 054, 055
SV 2000
Sylvania
027
Fisher
Funai
063, 066, 067,
065, 071, 091
Pentax
Philco
058, 005, 045,
093
031, 023, 024,
027
027, 081
064
027, 026, 020,
000
031, 024, 027,
023, 026, 020,
043
Symphonic
Tashiro
Tatung
033, 045, 024
G.E.
Philips
031, 023, 024,
086
003, 004, 005
Go Video
037, 051, 049,
050, 089
Teac
003, 004, 027,
005
Pioneer
Proscan
023
Goldstar
064
045, 058, 023,
024, 031, 046,
059, 060, 033,
087, 093
Technics
021, 022, 023,
024
024, 027, 070
059, 046, 079
Gradiente
083, 084, 081,
000, 001
Teknika
Toshiba
Hitachi
023, 045, 058,
027, 081, 093
Quasar
021, 022, 023,
024
Vector Research 005
Instant Replay 024, 023
Wards
Yamaha
Zenith
035, 036, 067,
044, 064
Radio Shack
033, 024, 063,
036, 067, 040,
027
Jensen
JVC
003
000, 001, 002,
003, 004, 005
063, 003, 004,
005
033, 045, 058,
023, 024, 031,
046, 059, 060,
083, 084, 085,
087, 093
RCA
Kenwood
LXI
003, 004, 064,
005
044, 082, 064,
094
027, 064, 058,
065, 066, 063,
067
Realistic
024, 063, 036,
067, 040, 027
Magnavox
031, 023, 024,
086
21
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 22
Remote Programming
DVD codes
Available with remote control models RM-C254 and RM-C255 only.
The remote control is programmed with DVD codes for power on, power off, play, stop,
fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation.
1) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
3) Press and hold down the DISPLAY button.
4) With the DISPLAY button held down, enter the first code number listed with the 10 key pad.
5) Release the DISPLAY button.
6) Confirm the operation of the DVD player.
• If your DVD player does not respond to the first code, try the others listed. If it does not
respond to any code, try the Search Codes Function, on page 53.
• After you program your remote, some DVD buttons may not work properly. If some buttons
do not work properly, use the remote control which came with your DVD player.
DVD Player
Aiwa
CODES
043
DVD Player
RCA
CODES
021, 026
Apex
040
Sampo
Samsung
Sharp
034
030
028
038
Denon
Hitachi
JVC
020, 037
030, 031
000
Silvania
Sony
Kenwood
Konka
035
024, 045, 046,
047
039
Mitsubishi
Onkyo
025
Technics
Toshiba
Vialta
020
023
050
041
Oritron
Panasonic
Philips
Pioneer
044
020
Wave
042
023, 036
022
Yamaha
Zenith
020
027, 032
033
Raite
22
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 23
Onscreen Menus
Using the Guide
Certain symbols are used throughout this guide to help you learn about the features of your
new television. The ones you will see most frequently are:
›‚ Up and Down arrows mean press the CH+ or CH- buttons. Pressing the CH+ or CH- but-
tons let you:
• Move vertically in a main menu screen
• Move through a submenu screen
• Move to the next letter, number, or other choice in a submenu
• Back up to correct an error
• Scan through TV channels (when not in a menu screen)
¥Š Left and right arrows mean press the VOLUME+ or VOLUME- buttons to move left or right
to:
• Select a highlighted menu item
• Select an item in a submenu
• Select numbers in certain menu options
• Turn the volume up or down (when not in a menu screen)
The “Press Button” icon means you should press the button named on your remote con-
trol. (Button names appear in SMALL CAPITAL LETTERS.)
The “Helping Hand” icon points to the highlighted or selected item in a menu.
The Onscreen Menus
To bring up the onscreen menu, press the MENU button on the remote control. The item that
appears in yellow is the one currently selected. If you press the MENU button again, the
onscreen display will skip to the next menu screen. If you use the Menu button on the TV’s
front panel instead of the remote, an additional menu screen showing channel number and
input will appear. The “Plug In Menu” will appear the first time the TV is plugged in.
Notes: Menus shown in this book are illustrations, not exact replications of the television’s
onscreen displays.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 24
Onscreen Menus
The Onscreen Menu System
Your television comes with JVC’s Onscreen Menu System. The Onscreen Menus let you make
adjustments to your television’s operation simply and quickly. Examples of the Onscreen
Menus are shown below and on the next page. Detailed explanations on using each menu fol-
low later in this guide.
Press the MENU button
INITIAL SETUP 02
INITIAL SETUP 01
PICTURE ADJUST 01
CLOCK/TIMERS
SOUND ADJUST
PICTURE ADJUST 02
• AV-36320 and AV-32320 have “V1 COMPONENT-IN” instead of V2 COMPONENT-IN.
• AV-36320 and AV-32320 do not have “XDS ID”.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 25
Plug In Menu
Introduction
The Plug In Menu comes up automatically when you first turn on the TV after plugging it in.
The Plug In Menu helps you to get your TV ready to use by letting you set your preferences
for:
• The Language in which you want the onscreen menus to appear,
• The Auto Tuner Setup of which channels you wish to receive,
• Setting the TV’s clock to the correct time so your timer functions will work properly.
Descriptions of each of the Plug In Menu features appear on this page and the next. We rec-
ommend you complete the Plug In Menu setup first so your TV is set up just the way you want,
right away.
Language
You can choose to view your onscreen menus in three languages: English (ENG.), French
(FRE.), or Spanish (ESP.).
Press the MENU button
›‚
To LANGUAGE
¥Š
To choose a language
ENG.
FRAN.
ESP.
• You will not need to press the MENU button to enter this screen from the Plug In Menu.
Auto Tuner Setup
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL +/- buttons) you will receive only clear, active channels.
Press the MENU button
›‚
To AUTO TUNER SETUP
To operate
¥Š
¥Šꢀ
›‚
To choose CABLE or AIR (or SKIP)
To move to START
¥Š
To start Auto Tuner Setup
NOW
PROGRAMMING !
48
Programming will take approximately 1 to 2
minutes.
PROGRAMMING OVER!
• Noise Muting will not work during Auto Tuner Setup.
• You will not need to press the MENU button to enter this screen from the Plug In Menu.
• SKIP appears only for Plug in Menu.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 26
Plug In Menu
Auto Clock Set
Before you use any of your TV’s timer functions, you must first set the clock. You may precise-
ly set your clock using the XDS time signal broadcast by most Public Broadcasting stations. To
set the clock using the XDS signal:
Enter the channel number of your local PBS station
Press MENU
›‚
To SET CLOCK
To operate
¥Š
¥Š
To AUTO
›‚
To TIME ZONE
¥Š
To select your time zone
ATLANTIC
CENTRAL
ALASKA
PACIFIC
EASTERN
MOUNTAIN
HAWAII
›‚
¥Š
›‚
¥Š
To move to Daylight Savings Time (D.S.T.)
To turn D.S.T. ON or OFF
To FINISH
To save settings and exit
• If you do not have a PBS station in your local area, you will have to set the clock manually.
See ‘Manual Clock Set’ on the next page for instructions.
• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight
Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The
clock will move back one hour at 2:00 am on the last Sunday in October.
• You will not need to press the MENU button to enter this screen from the Plug In Menu.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 27
Plug In Menu
Manual Clock Set
To set your clock manually (without using the XDS signal), choose MANUAL from the Set Clock
menu and follow the steps below.
›‚
¥Š
¥Š
To SET CLOCK
To operate
To MANUAL
›‚
To move to the hour
¥Š
›‚
To set the hour
To move to minutes
¥Š
›‚
To set the minutes
To move to START CLOCK
¥Š
To start clock and exit
THANK YOU!
• You will not need to press the MENU button to enter this screen from the Plug In Menu.
NOTE:
You will have to reset the clock after a power interruption. You must set the clock before oper-
ating any timer functions.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 28
Channel Summary
Channel Summary
Channel Summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or prevent any unauthorized viewers from watch-
ing any or all 181 channels.
Press the MENU button
›‚
To CHANNEL SUMMARY
To operate
¥Š
The Channel Summary screen (above) will now be displayed with the channels set to scan
marked with an "ꢀ". You can delete channels from the scan by removing the "ꢀ". If any chan-
nels were missed during Auto Tuner Setup and you wish to add them, you may by placing an
"ꢀ" next to the channel number.
›‚
To the SCAN column
¥Š
To include or delete from scan
EXIT when finished
You can block access to a channel by activating the Channel Lock.
›‚
To CHANNEL SUMMARY
¥Š
›‚
To operate
To the Lock Column
ZERO to lock or unlock that channel
EXIT when finished
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the Lock Code using the 10 key pad.
If the wrong code is entered, the message
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -
“INVALID LOCK CODE!” will flash on the screen:
The channel cannot be accessed until the
correct code is entered.
• Once a channel has been unlocked, it will
remain unlocked until the television is turned
off.
• See also “Set Lock Code”, page 36.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 29
V-Chip
Your TV is equipped with V-Chip technology which enables TV Parental Guidelines (for United
States and Canada) and Movie (MPAA) Guideline controls. V-Chip technology allows you to
program your TV to receive, or not to receive, programs based on content according to the
guidelines. Programs which exceed the ratings limits you set will be blocked. When a viewer
attempts to watch a blocked channel, this message appears:
THIS PROGRAMMING EXCEEDS
YOUR RATING LIMITS.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -
The channel will remain blocked until the correct lock code is entered (see page 36 for informa-
tion on setting your lock code).
You can customize the V-Chip settings of your television to match your personal tastes. The
V-Chip menu below is the starting point for your V-Chip settings
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting
each of the three V-Chip formats appear in the next seven pages along with descriptions of the
rating categories.
To access the rating categories:
Press the MENU button
›‚
To V-CHIP
¥Š
To operate (Lock icon
will appear)
Press ZERO to access the V-Chip menu
¥Š
›‚
To turn V-Chip ON or OFF (V-Chip must be turned ON for rating settings to operate)
To move to SET US TV RATINGS, SET MOVIE RATINGS, or SET CANADIAN RAT-
INGS (see following pages for descriptions of each item)
Special Note about Ratings
Some programs are not broadcast with a ratings signal. Therefore, even if you setup V-Chip
ratings limits, these programs will not be blocked. Parents are cautioned to preview the con-
tents of these programs or movies.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 30
V-Chip
US V-Chip Ratings
U.S. PARENTAL RATING SYSTEMS
Programs with the following ratings are appropriate for children.
❒ TV Y is Appropriate for All Children.
Programs are created for very young viewers and should be suitable for all ages, including
children ages 2 - 6.
❒ TV Y7 is for Older Children.
Most parents would find such programs suitable for children 7 and above. These programs
may contain some mild fantasy violence or comedic violence, which children should be able
to discern from reality.
Programs with the following ratings are designed for the entire audience.
❒ TV G stands for General Audience.
Most parents would find these programs suitable for all age groups. They contain little or no
violence, no strong language, and little or no sexual dialog or situations.
❒ TV PG Parental Guidance Suggested.
May contain some, but not much, strong language, limited violence, and some suggestive
sexual dialog or situations. It is recommended that parents watch these programs first, or
with their children.
❒ TV 14 Parents Strongly Cautioned.
Programs contain some material that may be unsuitable for children under the age of 14
including possible intense violence, sexual situations, strong coarse language, or intensely
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.
❒ TV MA Mature Audiences Only.
These programs are specifically for adults and may be unsuitable for anyone under 17
years of age. TV MA programs may have extensive V, S, L, or D.
Viewing Guidelines
In addition to the ratings categories explained above, information on specific kinds of con-
tent are also supplied with the V-Chip rating. These types of content may also be blocked.
The content types are:
• V/FV is for VIOLENCE/FANTASY VIOLENCE
• S stands for SEXUAL CONTENT
• L stands for strong LANGUAGE
• D stands for suggestive DIALOG
30
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 31
V-Chip
Setting US V-Chip Ratings
Press the MENU button
›‚
To V-CHIP
¥Š
To operate (Lock icon
appears)
Press ZERO to access the V-Chip menu
¥Š
›‚
To turn V-Chip ON or OFF
To move to SET US TV RATINGS
¥Š
To operate
Directions to set US V-Chip Ratings:
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and
press the or‚ꢀto move the cursor to the correct location. Press or to turn the locking
feature on or off. An item is locked if the icon appears instead of a “—”.
›
¥
Š
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that
column and add a lock icon. Once you've put a lock on the top row, everything in that column
is automatically locked.
›‚
To the TV 14 Column
To turn on the lock
¥Š
I N I T I A L S E T U P
V - C H I P
S E T U S T V R AT I N G S
TV TV TV TV TV TV
MA
14
PG
G
Y7
Y
V/FV
S
L
D
F I N I S H
S E L E C T
B Y
O P E R AT E B Y
E X I T B Y E X I T
›‚
To FINISH
To save settings and exit
¥Š
• If you want to change the setup, move the cursor to the top column and change the lock icon
to “—” by pressing or again. You may then select individual categories to block.
¥
Š
31
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 32
V-Chip
Setting ratings with the V-Chip button
To access Rating information about a certain program, press the V-CHIP button while viewing
that program. A display like this will appear:
PROGRAM IS RATED
:
TV-PG - V
If you decide you want to block this category of viewing, press "0" while the above screen is
visible, and all programs from that category will be blocked.
Example 1:
If you want to set your V-Chip settings to block all programming above TV-PG:
Press ZERO when TV-PG is displayed
I N I T I A L S E T U P
V - C H I P
S E T U S T V R AT I N G S
TV TV TV TV TV TV
MA
14
PG
G
Y7
Y
V/FV
S
L
D
S E L E C T
B Y
O P E R AT E B Y
E X I T B Y E X I T
All Programming above TV-PG will be blocked.
Example 2:
If you want to set your V-Chip settings to block all programming above a current setting such
as TV PG-V (with violence):
Press ZERO when TV-PG - V is displayed
I N I T I A L S E T U P
V - C H I P
S E T U S T V R AT I N G S
TV TV TV TV TV TV
Y
MA
14
PG
G
Y7
V/FV
S
L
D
S E L E C T
B Y
O P E R AT E B Y
E X I T B Y E X I T
All Programming above TV-PG - V (with Violence) will be blocked.
• For Children's programming you can block TV-Y and Y7 programs by Pressing “0” when Y is
displayed during a program. Programming for audiences other than children’s audiences will
not be affected.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 33
V-Chip
Movie Ratings
❒ NR - Not Rated.
This is a film which has no rating. In many cases these films were imported from countries
which do not use the MPAA ratings system. Other NR films may be from amateur producers
who didn’t intend to have their film widely released.
NR (Not Rated) Programming may contain all types of programming including chil-
dren's programming, foreign programs, or adult material.
❒ G – General Audience.
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audiences of any age.
❒ PG – Parental Guidance.
Parental Guidance means the movie may contain some contents such as mild violence,
some brief nudity, and strong language. The contents are not deemed intense.
❒ PG-13 – Parents Strongly Cautioned.
Parents with children under 13 are cautioned that the content of movies with this rating may
include more explicit sexual, language, and violence content than movies rated PG.
❒ R - Restricted.
These films contain material that is explicit in nature and is not recommended for
unsupervised children under the age of 17.
❒ NC-17 - No One Under 17.
These movies contain content which most parents would feel is too adult for their children to
view. Content can consist of strong language, nudity, violence, and suggestive or explicit
subject matter.
❒ X - No One under 18.
Inappropriate material for anyone under 18.
Directions to set Movie (MPAA) Ratings
Press the MENU button
›‚
To V-CHIP
¥Š
To operate (Lock icon
appears)
Press ZERO to access V-Chip setup options
›‚
To SET MOVIE RATINGS
To enter movies menu
¥Š
For example, to block viewing of X and NC-17 rated from shows:
›‚
To the X Column
¥Š
To turn on the lock
›‚
¥Š
›‚
¥Š
To the NC-17 Column
To turn on the lock
To FINISH
To save settings and exit
33
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 34
V-Chip
Canadian V-Chip Ratings
❒ E - Exempt.
Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
❒ C – Programming Intended for Children.
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature.
❒ C8+ – Programming Intended for Children 8 and Over.
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low
intensity and will show the consequences of the acts. There will be no offensive language,
nudity or sexual content.
❒ G – General Audience.
Programming will contain little violence and will be sensitive to themes which could affect
younger children.
❒ PG - Parental Guidance.
Programming intended for a general audience, but which may not be suitable for younger
children. Parents may consider some content not appropriate for children aged 8-13.
❒ 14+ - 14 Years and Older.
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and
early teens. Programming may contain mature themes and scenes of intense violence.
❒ 18+ - Adult.
Material intended for mature audiences only.
Directions to set Canadian V-Chip Ratings
Press the MENU button
›‚
To V-CHIP
¥Š
To operate (Lock icon
appears)
Press ZERO to access V-Chip setup options
›‚
To SET CANADIAN RATINGS ENG (for English)
To enter ratings menu
¥Š
For example, to block viewing of programming rated 14+ and 18+ :
›‚
To the 18+ Column
To turn on the lock
¥Š
›‚
To the 14+ Column
P
C
G
C
18+
14+
G
8
¥Š
›‚
To turn on the lock
To FINISH
To save settings and exit
¥Š
• For instructions on “Set Canadian Ratings FRE (in French)”, please see page 34 in the
French side of this user’s guide.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 35
V-Chip
Unrated Programs
Notes About Unrated Programs
Unrated programming refers to any programming which does not contain a rating signal.
Programming on television stations which do not broadcast rating signals will be placed in the
“Unrated Programming" category.
Examples of Unrated programs:
Emergency Bulletins
Locally Originated Programming
News
Political Programs
Public Service Announcements
Religious Programs
Sports
Weather
Some Commercials
• TV programs or movies that do not have rating signals will be blocked if the Unrated
Category is set to BLOCK.
Directions to Block Unrated Programs
You can block programs that are not rated.
Press the MENU button
›‚
To V-CHIP
¥Š
To operate (The lock icon
appears)
Press ZERO to access V-Chip setup options
›‚
To UNRATED
¥Š
To VIEW or BLOCK
Press EXIT when done
35
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 36
V-Chip
Set Lock Code
Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes
pre-set with a Lock Code of "0000". You may change the code to any four-digit number you
wish. To change the Lock Code, follow the steps below.
Press the MENU button
›‚
To SET LOCK CODE
¥Š
To operate (The Lock icon
appears)
Press ZERO to access the Lock Code
The first digit will be highlighted
¥Š
›‚
To select the number
To move to the next digit
Continue to follow these directions for all four numbers
›‚
To FINISH
¥Š
To save settings and exit
Your Lock Code is now set.
NOTES:
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 37
Picture Settings
Tint
Tint allows you to adjust the levels of red and green in your TV picture.
Press the MENU button
›‚
Š
¥
›‚
To TINT
To increase the levels of green
To increase the levels of red
To move to the next setting
Color
The color function lets you make all the colors in the TV picture appear either more vivid or
subtle.
Press the MENU button
›‚
Š
¥
›‚
To COLOR
To make the colors more vivid
To make the colors more subdued
To move to the next setting
Picture
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker
or brighter picture overall.
Press the MENU button
›‚
Š
¥
›‚
To PICTURE
To increase the level of contrast
To decrease the level of contrast
To move to the next setting
Bright
You can adjust the overall brightness of the TV picture with the Bright control.
Press the MENU button
›‚
Š
¥
›‚
To BRIGHT
To lighten the picture
To darken the picture
To move to the next setting
Detail
The Detail feature adjusts the level of fine detail displayed in the picture.
Press the MENU button
›‚
Š
¥
›‚
To DETAIL
To make the picture sharper (more detail)
To make the picture smoother (less detail)
To move to the next setting
37
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 38
Picture Settings
Noise Muting
This feature inserts a blank blue screen over channels which are not broadcasting or are too
weak to be received clearly.
Press the MENU button
›‚
To NOISE MUTING
¥Š
To turn Noise Muting ON or OFF
• Noise Muting will not work during Auto Tuner Setup
or when you operate Channel Summary.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 39
Sound Settings
Bass
You can increase or decrease the level of low-frequency sound in the TV’s audio with the Bass
adjustment.
Press the MENU button
›‚
To BASS
Š
To increase the bass
¥
›‚
To decrease the bass
To move to the next setting
Treble
Use Treble to adjust the level of high-frequency sound in your TV’s audio.
Press the MENU button
›‚
To TREBLE
Š
To increase the treble
¥
›‚
To decrease the treble
To move to the next setting
Balance
Adjust the level of sound between the TV’s two speakers with the Balance setting.
Press the MENU button
›‚
To BALANCE
Š
To shift the balance towards the right speaker
¥
›‚
To shift the balance towards the left speaker
To move to the next setting
MTS (Multi-Channel Television Sound)
MTS technology allows several audio signals to be broadcast at once, giving you a choice in
what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broad-
cast may also include a Second Audio Program (SAP).
Press the MENU button
›‚
To MTS
¥Š
Select the mode
(The ON AIR arrow tells you if a broadcast is in Stereo and/or contains an SAP).
• Keep the TV in STEREO mode to get the best sound quality. The sound will work in
STEREO mode even if a certain broadcast is in MONO sound only.
• Choose the MONO setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
NOTE:
You can leave the Sound Settings menu at any time by pressing the EXIT button on the remote
control.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 40
General Items
On/Off Timer
The On/Off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you're not
home.
Press the MENU button
›‚
To ON/OFF TIMER
¥Š
To operate (begins with ON TIME)
¥Š
‚
To set the hour (AM/PM) you want the TV to turn on
To move to minutes
‚
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
OFF TIME the same way as ON TIME
‚
To accept OFF TIME and move to CHANNEL
¥Š
To select channel
To ON VOLUME
‚
¥Š
To set the volume level
To move to MODE
‚
¥Š
Choose ONCE or EVERYDAY
To ON/OFF TIMER
‚
¥Š
Choose ON to accept the timer setting, choose OFF if you don't wish to accept
To FINISH
‚
¥Š
To save settings
On/Off Timer Note for PIP
(AV-36360, AV-36S36, AV-32360, AV-32S36 models only).
If the television is on when a timed event is about to start a Timer Preview window will appear.
The Timer Preview window will appear in the lower right corner of the screen seven seconds
before the timer is programmed to begin. When the timer activates, the Preview picture will
become the main picture.
NOTES:
• The On/Off time cannot be set to locked or guarded channels.
• In order for the On/Off timer to work, the clock must be set.
• After a power interruption, the Timer settings must be reset.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 41
General Items
Closed Caption
Many broadcasts now include an onscreen display of dialog called Closed Captions. Some
broadcasts may also include displays of additional information in text form. Your television can
access and display this information using the Closed Caption feature. To activate the Closed
Caption feature, follow the steps below.
Press the MENU button
›‚
To CLOSED CAPTION
To operate
¥Š
¥Š
To select CAPTION (for Closed Captions), TEXT (for text display), or OFF (for no
display)
›‚
To move to CAPTION or TEXT
¥Š
›‚
To select a caption (CC1 to CC4) or text channel (T1 to T4)
To accept that selection and move to FINISH
¥Š
To save settings and exit
NOTES:
• Closed Caption subtitles are usually found on closed caption channel CC1. Some programs may
include additional text information which is usually found on text channel T1. The other channels
are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are playing a
video tape.
• Most broadcasts containing Closed Captioning will display a notice at the start of the program.
Front Panel Lock
This allows you to lock the keys on the front of the TV, so that a child may not accidentally
change your viewing preferences.
Press the MENU button
›‚
To FRONT PANEL LOCK
To turn ON or OFF
¥Š
EXIT when finished
• Not only can you turn off this feature by using the remote control, you can turn it off by
unplugging your TV, and plugging it back in. This is in case the batteries die out or you aci-
dentally lose your remote. Doing this will set this feature back to off. Also, if it is difficult to
unplug your TV, you can turn this feature off by pressing the MENU button on the front of the
TV for more than 3 seconds. In this case, the OSD for FRONT PANEL LOCK will appear.
You can also turn this feature off by pressing the POWER button on the TV for more than 3
seconds.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 42
General Items
Auto Shut Off
This function automatically shuts off your TV when there is no signal from the channel the TV
is on.
Press the MENU button
›‚
To AUTO SHUT OFF
To turn ON or OFF
¥Š
EXIT when finished
• If the channel that you have on does not recieve a signal for more than one minute, the
blinking text “NOT RECIEVING A SIGNAL” appears on the screen. If no signal is being
recieved within 10 minutes, the TV shuts itself off.
XDS ID
XDS ID Display provides a channels call letters, the network’s name, and even a program
name.
Press the MENU button
›‚
To XDS ID
¥Š
To turn ON or OFF
EXIT when finished
• XDS ID is available on all models except for AV-36320 and AV-32320.
V2 Component-In / V1 Component-In
Get the best quality video from your DVD player by using this setting and the DVD inputs at
the rear of the television. Set either to YES for component input (for DVD) or to NO for com-
posite video input (for a regular VCR).
Press the MENU button
›‚
To V2 COMPONENT-IN (or V1 COMPONENT-IN for models AV-36320 and AV-
32320)
¥Š
To turn the input ON (YES) or OFF (NO)
EXIT when finished
• This option should be used with DVD players only. For information on connecting VCR’s see
page 14. For more information on connecting a DVD player, see page 17.
• V2 COMPONENT-IN: AV-36360, AV-36330, AV-36S36, AV-36S33, AV-32360, AV-32330,
AV-32S36 and AV-32S33
• V1 COMPONENT-IN: AV-36320 and AV-32320 only.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 43
Button Functions
Menu
The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate
the onscreen menu system.
• See individual topics (like “Sound Settings) for specific information on using menus.
Exit and PIP Off
Press the EXIT button to leave a menu screen. On the RM-C254 this button is also labeled “PIP
OFF”. Press EXIT/PIP OFF to turn off the Picture-in-Picture function (please see page 47 for
more information on the PIP feature).
• PIP is available on AV-36360, AV-36S36, AV-32360 and AV-32S36 models only.
Display
The Display screen shows the current status of timers, inputs and XDS ID.
Press the DISPLAY button
05 KLVX PBS
SESAME STREET
NOW
12:20 PM
OFF
EVERYDAY
7:00 PM
10:00 PM
SLEEP TIMER
ON/OFF TIMER
ON TIME
OFF TIME
The screen above shows the following information:
• The current channel or AV input (Channel 05)
• The current time (12:20 pm)
• Sleep Timer status/minutes remaining (The Sleep Timer is off)
• On/Off Timer status (Set to turn on everyday at 7:00 PM, off at 10:00 PM)
• Each Press of the DISPLAY button changes the display mode:
Display
Time
Channel
Off
Display - Full screen shown above
Time - Shows the current time only
Channel - Shows the current channel
Off - Turns Display off
• You may also turn off the Display at any step by pressing EXIT.
NOTE:
• Please note that if the Clock, Sleep Timer or On/Off Timer are not set, the Display screen will
show: "CLOCK NOT SET", "SLEEP TIMER OFF", and "ON/OFF TIMER OFF" respectively.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 44
Button Functions
Video Status
The VIDEO STATUS button gives you a choice of three TV picture display settings, including a
display of your own preferences.
Standard - Resets the picture display to the factory settings.
Dynamic - Heightens contrast
Sports - When you watch a sports program
Press the VIDEO STATUS button
STANDARD
DYNAMIC
SPORTS
Sleep Timer
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals
of 15 minutes, for a total time of up to 180 minutes.
Press the SLEEP TIMER button
0 15 30 45 60 75 90 105 120 135 150 165 180
Sleep Timer Message
20 seconds before the automatic shutoff, this message will appear:
GOOD NIGHT!!
PUSH SLEEP TIMER BUTTON
TO EXTEND.
You then have 20 seconds to press the Sleep Timer button to delay the shutoff for another
15 minutes.
Hyper Surround
Creates a deep, three-dimensional sound effect by channeling the audio through the TV's front-
firing speakers. Press the HYPER SUR. (Hyper Surround) button to turn the effect on or off.
HYPER SURROUND
ON OFF
NOTE: Except for AV-36320 and AV-32320
Muting
The MUTING button instantly turns the volume down completely when you press it. Press
MUTING and the volume level will instantly go to zero. To restore the volume to its previous
level, press MUTING again.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 45
Button Functions
100+ Button
Use the 100+ button to directly access channels above Channel 99. For example to move to
channel 124, press100+, 2 (two), 4 (four).
Return+
The RETURN+ button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the chan-
nels using the CH+ and CH- buttons.
RETURN+ and hold for three seconds
RETURN CHANNEL
PROGRAMMED !
The channel currently active has been programmed as your Return+ channel. Now scan
through the channels using the CHANNEL+/- buttons
RETURN+
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the RETURN+ button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the CHANNEL+/- buttons. Pressing any number key will cancel
Return+.
• Return+ does not affect the PIP channel (AV-36360, AV-36S36, AV-32360, AV-32S36 only).
Input
Selects the signal input source for the television: TV (for Antenna or Cable) or Video-1, 2 or 3
for video devices like VCR’s, DVD players, or camcorders.
INPUT
TV
VIDEO-1
VIDEO-2
VIDEO-3
TV
VIDEO-1
VIDEO-2
AV-36320 and AV-32320 only
45
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 46
Button Functions
VCR Buttons
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufac-
turer’s brand VCR, please see the code chart and instructions on page 21.
NOTE: The RM-C205 remote control can only be used with JVC-brand VCRs.
DVD Buttons (RM-C254, RM-C255 only)
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,
power on, and power off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 22.
TV/CATV Switch (RM-C254, RM-C255 only)
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to
operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.
• See page 20 for information on programming your remote for cable box operation.
VCR/DVD Switch (RM-C254, RM-C255 only)
You can control a VCR or DVD player with the buttons on the lower part of the remote control.
Use the VCR/DVD selector switch to choose either VCR or DVD operation.
• See pages 21 and 22 for information on programming your remote with VCR and DVD oper-
ating codes.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 47
Button Functions - PIP
PIP displays two separate pictures on screen. Your television has 2-Tuner PIP, meaning you
can view pictures from two different channels simultaneously. A special set of PIP control but-
tons are located on the upper part of the remote control. Descriptions of each button appear on
this page.
The PIP feature is available on AV-36360, AV-36S36, AV-32360 and AV-32S36 models only.
Cable Box Note
The 2-Tuner PIP function may not operate when used with certain cable boxes. This is
because while some models of cable box may receive up to 181 channels, they may only send
the signal from one channel to your television (please also see diagram on page 12). For the
PIP tuner to operate correctly, it must have access to all available channels. Since the televi-
sion is receiving the signal of only one channel from the cable box, it is impossible for the 2-
Tuner PIP to display a second, different channel.
Because there are many different models of cable boxes in use today, if you are having prob-
lems operating your PIP feature with your cable box, we recommend you contact your local
cable company for connection advice.
On/Move
Turn PIP on by pressing the ON/MOVE button.
(PIP) ON/MOVE
07
02
EXIT/PIP OFF to turn PIP off
Once PIP is turned on, you can move the PIP window to any of the TV’s main picture’s four
corners with the ON/MOVE button.
ON/MOVE
• Each press of ON/MOVE will shift the PIP window to a different corner.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 48
Button Functions - PIP
Freeze
Use the FREEZE button to lock a single, still image onto the PIP window.
• If PIP is off when FREEZE is pressed, a snapshot of the main screen is taken and placed in
the PIP window.
• If PIP is on when FREEZE is pressed, the image in the window when the button was pressed
is held.
Swap
You can exchange the channel displayed on the main screen for the one shown in the PIP win-
dow by pressing SWAP.
Channel +/- for PIP
Like the main CHANNEL +/- buttons, CHANNEL +/- for PIP lets you scan through the channels in
the PIP window.
• Direct channel selection with the 10 key pad for PIP is not possible.
Source
You can select the signal source for the PIP window image.
TV
V-1
V-2
V-3
TV
V-1
V-2
AV-36320 and AV-32320 only
• If the PIP does not have a signal, the window will be blue.
• If you connect a DVD to Video-2 the PIP window will be blue.
EZ-Surf (AV-36360, AV-36S36, AV-32360 and AV-32S36 ONLY)
EZ-Surf utilizes the PIP window to surf all the available channels so that you don’t have to
change your current program to see what else is on TV.
• If the PIP window is off, you can see the channel numbers and XDS only.
NOTES:
1
• The PIP window is
/
the size of the full screen.
9
• PIP will not display blocked channels or programs. A blue screen will display instead.
• You can adjust the PIP window picture the same as the main picture. (See page 37).
48
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 49
Troubleshooting
PROBLEMS
CHECK
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
There is no picture
or sound
• The antenna could be disconnected.
• The input mode could be set improperly. See page 45.
• The tuner (Auto Tuner Setup) could be set improperly. See page 25.
• The TV station may be having difficulties. Check to see if other stations are working.
Remote control is not • Check to see that the batteries are still working and properly installed.
operating properly or • Make sure the remote has a clear sight path to the TV.
at all
• Check that the TV/CATV switch is in the proper position. (RM-C254 and RM-C255 only)
• You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select a
certain channel
• Make sure the channels have been programmed. See "Channel Summary", page 28.
• Check to see if the channel is locked. See "Channel Summary - Lock" page 28.
The power turns off
by itself
• Make sure the set did not become unplugged.
• Perhaps the On/Off Timer is set. See page 40.
• Check to see if the Sleep Timer was set. See page 44.
The clock is wrong
• The power was interrupted and the clock was not reset. See page 26.
• There is a problem with the TV. Unplug the set and call for service.
The On Timer is
blinking
The color quality
is poor
• Tint and Color may be improperly adjusted. See page 37.
• The Video Status mode may be turned to the wrong setting. See page 44.
There are lines
across the picture
• There could be interference from another electrical appliance, such as a computer,
another TV or VCR. Move any such appliances further away from the TV.
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
The picture is spotted
There are double
pictures (ghosts)
• A building or passing airplane can reflect the original signal and produce a second,
slightly delayed one. Adjust your antenna position.
Picture is snowy
(image noise)
• Your antenna may be damaged, disconnected or turned. Check the antenna
connection. If the antenna is damaged, replace it.
Screen is 40% black • The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 41.
Stereo or bilingual
programs can't be
heard
• Make sure the MTS settings are correct. See "MTS" on page 39.
There is no picture
being displayed for
V2 COMPONENT-IN*
• Check your AV Cables to make sure they are connected tightly and properly.
• In case you are connecting using component cables to V2, make sure in the onscreen
menu system, you have "YES" selected for the V2 COMPONENT-IN.
See page 17 and 42.
• In case you are connecting using composite cables to V2, make sure you have 'NO"
selected for the V2 COMPONENT-IN. See page 17 and 42.
* AV-36320 and AV-32320 have "V1 COMPONENT-IN" instead of "V2 COMPONENT-IN".
Static electricity
• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional • It is normal for the TV to make crackling sounds when first turned on or off. Unless
crackling sounds the sound or picture become abnormal, this is fine.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 50
Warranty
For Canadian model televisions, see the separate sheet for Canadian
Warranty information.
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth
below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE
MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period
shown below (the “Warranty Period”) (PICTURE TUBE is covered for Two (2) years.)
Parts
Labor
1 YEAR
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE
1 YEAR
DISTRICT OF COLUMBIA AND COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective within the warranty period, JVC will repair or
replace defective parts at no charge to the original owner. Such repair and replacement
services shall be rendered by JVC during regular business hours at JVC authorized
service centers. Parts used for replacement are warranted only for the remainder of
this Warranty Period. All products and parts thereof may be brought to a JVC author-
ized service center on a carry-in basis. Televisions with a screen size of 25 inches and
larger may be covered on an in-home basis where such service is available.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
To determine if in-home service is available in your area, either contact the selling dealer
(retailer) or call 1-800-537-5722 to locate the nearest JVC authorized service center. Service
available, will require clear access to the Television by the service representatives. If in-home
service is not available, carry in service will be provided.
If service is not locally available, box the product carefully, preferably in its original car-
ton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the
problem to the nearest JVC Factory Service Center, the name and location which will be
given to you by the toll free number.
If you have any questions concerning your JVC Product, please contact our Customer
Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1) Products which have been subject to abuse, accident, alteration, modification, tam-
pering, negligence, misuse, faulty installation, lack of reasonable care, or if repaired
or serviced by anyone other than a service facility authorized by JVC to render such
service, or if affixed to any attachment not provided with the products, or if the
model or serial number has been altered, tampered with, defaced or removed;
2) Initial installation, installation and removal from "built-in" entertainment centers and
other mounting systems;
3) Operational adjustments covered in the Owner’s Manual, normal maintenance, video
and audio head cleaning;
4) Damage that occurs in shipment, due to an act of God, and cosmetic damage;
5) Signal reception problems and failures due to line power surge;
6) Video Pick-upTubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90
days from the date of purchase;
50
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 51
Warranty
7) Accessories;
8) Batteries (except that Rechargeable Batteries are covered for 90 days from date of
purchase.)
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILTY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY
HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVE-
NIENCE, OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSE-
QUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR
DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY, ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE,
ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limi-
tations on how long the warranty lasts, so these exclusions or limitations may not
apply to you. This warranty gives you specific legal rights and you may also have other
rights which vary state to state.
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, New Jersey 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY. THIS WARRANTY
DOES NOT APPLY FOR DETAILS OF REFURBISHED PRODUCT WARRANTY.
PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. and Serial No. which is located either on the rear, bottom or
side of the cabinet.
Retain this information for future reference.
Model No.:
Purchase Date:
Serial No.:
Name Of Dealer:
51
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 52
Authorized Service Centers
QUALITY
SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE: 1 (800) 537-5722
Dear Customer,
In order to receive the most satisfaction from your purchase, please read the
instruction booklet before operating the unit. In the event that repairs are neces-
sary, please call 1 (800) 537-5722 for your nearest authorized servicer or visit
our website at www.JVC.com
Remember to retain your Bill of Sale for Warranty Service.
Do not service the television yourself
Caution
To prevent electrical shock, do not open the cabinet. There are no user serviceable
parts inside. Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product, please call toll free: 1 (800) 882-
2345 or on the web at www.JVC.com
For service in Canada
To locate your local JVC service center or dealer in Canada please call:
In Eastern Canada:
1 (416) 293-1311
In Western Canada:
1 (604) 270-1311
En Français (Montréal):
1 (514) 871-1311
Or visit us on the web at www.JVC.ca
52
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 53
Search Codes
NOTE: Except for AV-36320 and AV-32320
Cable/Satellite Search Codes Function:
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the TV POWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press TV POWER, see if the CATV or Satellite box responds.
4) If there was a response, press RETURN+. The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use
the
remote control which came with the equipment.
5) Press RETURN+ to exit.
VCR Search Codes Function:
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
2) Press the VCR POWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press VCR POWER, see if the VCR responds.
4) If there was a response, press RETURN+. The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use
the
manufacturers remote control which came with the VCR.
5) Press RETURN+ to exit.
DVD Player Search Codes Function:
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
2) Press the DVD POWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press DVD POWER, see if the DVD player responds.
4) If there was a response, press RETURN+. The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 30 times without a response, use
the manufacturers remote control which came with the DVD player.
5) Press RETURN+ to exit.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 54
Specifications
AV-32330
AV-32S33
AV-32320
AV-32360
AV-32S36
AV-36330
AV-36S33
AV-36320
AV-36360
AV-36S36
MODEL
Reception
Format
NTSC, BTSC System (Multi-Channel Sound)
VHF 2 to 13, UHF 14 to 69
Sub Mid, Mid, Super, Hyper and Ultra bands
(181 channel frequency synthesizer system)
Reception
Range
Power Source
AC 120V, 60Hz
Power
Consumption
128W
133W
130W
133W
32 inch / 80 cm
measured diagonally
full square
36 inch / 90 cm
measured diagonally
full square
Screen Size
Audio Output
Speakers
3W + 3W
2 x 4 3/4 / 5x12 cm
oval x 2
3 1/4 x 4 3/4 / 8x12 cm
oval x 2
Antenna
Terminal
75 ohms (VHF/UHF) (F-type connector)
External Input
Jacks
Video: 1 Vp-p, 75 ohms
Audio: 500mVrms (-4dBs) high impediance
S-Video Input
Jack
Y: 1Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
Component
Input Jacks
Y: 1Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p, 75 ohms
Audio Output
Jacks (FIX)
500 mVrms (-4dBs) Low impedance (400 Hz when modulated 100%)
Dimensions (In)
WxHxD (cm)
30 1/4 x 26 1/4 x 21 1/2
76.8 x 66.7 x 54.7
33 7/8 x 30 1/8 x 23 3/4
86.0 x 76.5 x 60.3
Weight (lbs / kg)
Accessories
112.2 / 51.0
149.2 / 67.8
Remote control unit x 1 / AA batteries x 2
Specifications subject to change without notice.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 55
Note
55
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-32/36S33/36/320/330/360 ENG 10/2/02 12:19 PM Page 56
JVC COMPANY OF AMERICA
Division of JVC Americas Corp.
1700 Valley Road
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada, M1X 1A7
Wayne, New Jersey, 07470
Download from Www.Somanuals.com. All Manuals Search And Download.
|