CD RECEIVER
RECEPTEUR CD
KD-G411
For canceling the display demonstration, see page 7.
Pour annuler la démonstration des affichages, référez-vous à la page 7.
For installation and connections, refer to the separate manual.
Pour l’installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
GET0257-003A
[EX/EU]
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
How to reset your unit ...........................
How to forcibly eject a disc...................
How to read this manual........................
How to use the MODE button...............
2
2
4
4
Sound adjustments ................18
Selecting preset sound modes
(C-EQ: custom equalizer) .................. 18
Adjusting the sound............................... 19
Control panel — KD-G411......... 5
Parts identification.................................
General settings — PSM .........20
5
Basic procedure ..................................... 20
Getting started....................... 6
Detaching the control
Basic operations..................................
Canceling the display demonstrations...
Setting the clock ....................................
6
7
7
panel ..................................22
Using the remote controller
— RM-RK60............................23
Main elements and features ...................... 23
Radio operations ................... 8
Listening to the radio...........................
Storing stations in memory....................
Listening to a preset station...................
8
9
9
Maintenance..........................24
More about this receiver ........25
Troubleshooting.....................27
Specifications.........................29
FM RDS operations.................10
Searching for your favorite FM RDS
programme....................................... 10
Storing your favorite programmes......... 11
Using the standby receptions................. 11
Tracking the same programme
—Network-Tracking Reception ........ 12
Disc operations ......................13
Playing a disc ..................................... 13
Other main functions ............................. 15
Changing the display information ......... 16
Selecting the playback modes................ 17
*Temperature inside the car....
*For safety....
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating the
unit.
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
How to read this manual
How to use the MODE button
If you press MODE, the receiver goes into
functions mode, then the number buttons and
5/∞ buttons work as different function buttons.
The following methods are used to made the
explanations simple and easy-to-understand:
• Some related tips and notes are explained in
“More about this receiver” (see page 25).
• Button operations are mainly explained with
the illustrations as follows:
Ex.: When number button 2 works as
MO (monaural) button.
Press briefly.
Press repeatedly.
Press either one.
Time countdown indicator
To use these buttons for original functions
again after pressing MODE, wait for
5 seconds without pressing any of these buttons
until the functions mode is cleared.
• Pressing MODE again also clears the
functions mode.
Press and hold until
your desired response
begins.
Press and hold both
buttons at the same
time.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel — KD-G411
Parts identification
Display window
1
(standby/on attenuator) button
;
a
4/¢
(control panel release) button
buttons
2 SEL (select) button
3 CD button
s ∞ (down) button / –10 button
4 FM/AM button
5 Loading slot
6 Display window
7 0 (eject) button
8 TP PTY (traffic programme/programme
type) button
9 Remote sensor
Display window
d Tuner reception indicators—
MO (monaural), ST (stereo)
f WMA indicator
g RDS indicators—TP, PTY, AF, REG
h MP3 indicator
j CD indicator
• You can control this receiver with an
optionally purchased remote controller.
• DO NOT expose the remote sensor to
strong light (direct sunlight or artificial
lighting).
k Playback mode / item indicators—
RND (random),
RPT (repeat)
l LOUD (loudness) indicator
/ EQ (equalizer) indicator
z Sound mode (C-EQ: custom equalizer)
indicators—ROCK, CLASSIC, POPS,
HIP HOP, JAZZ, USER
(disc),
(folder),
p 5 (up) button / +10 button
q Control dial
w Number buttons
e EQ (equalizer) button
r MO (monaural) button
t SSM (Strong-station Sequential Memory)
button
y RPT (repeat) button
u RND (random) button
i MODE button
•
also works as the time countdown
indicator.
x Disc information indicators—TAG (ID3
Tag), (folder), (track/file)
c Main display
v Source display / Volume level indicator
b Tr (track) indicator
o DISP (display) button
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Basic operations
To drop the volume in a moment (ATT)
~
Ÿ
To restore the sound, press it
again.
To turn off the power
You cannot select “CD” as the playback
source if there is no disc in the loading
slot.
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging the
speakers by the sudden increase of the output
level.
!
Volume level appears.
Volume level indicator
⁄
Adjust the sound as you want.
(See pages 18 and 19.)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Canceling the display
demonstrations
If no operations are done for about 20 seconds,
display demonstration starts.
Setting the clock
1
[Initial: DEMO ON]—see page 20.
1
2
2 Set the hour, minute, and clock
system.
1 Select “CLOCK H” (hour), then
adjust the hour.
2 Select “CLOCK M” (minute),
then adjust the minute.
3 Select “24H/12H,” then select
“24H” (hour) or “12H” (hour).
3
3 Finish the procedure.
To check the current clock time when the
power is turned off
4 Finish the procedure.
To activate the display demonstration
In step 3 above...
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operations
Listening to the radio
2 Select the desired station frequencies.
~
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
When an FM stereo broadcast is hard to
receive
1
Selected band appears.
Ÿ
Start searching for a station.
2
When a station is received, searching
stops.
To stop searching, press the same
button again.
Lights up when monaural mode is activated.
To tune in to a station manually
In step Ÿ above...
1
Reception improves, but stereo effect will
be lost.
To restore the stereo effect, repeat the same
procedure so that the MO indicator goes off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting—
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 – FM3)
you want to store into.
Preset number flashes for a while.
2
3
Listening to a preset station
1
2 Select the preset station (1 – 6) you
want.
“SSM” flashes, then disappears when
automatic presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
or
Manual presetting
Ex.:Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
To check the current clock time while
listening to an FM (non-RDS) or AM station
• For FM RDS stations, see page 12.
1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FM RDS operations
Searching for your favorite FM RDS programme
You can tune in to a station broadcasting your
favorite programme by searching for a PTY code.
!
Start searching for your favorite
programme.
~
The last selected PTY code appears.
If there is a station broadcasting a
programme of the same PTY code as
you have selected, that station is tuned
in.
Ÿ
Select one of your favorite
programme type.
PTY codes
NEWS O AFFAIRS O INFO O SPORT O
EDUCATE O DRAMA O CULTURE O
SCIENCE O VARIED O POP M (music)
O ROCK M (music) O EASY M (music) O
LIGHT M (music) O CLASSICS O
OTHER M (music) O WEATHER O
FINANCE O CHILDREN O SOCIAL O
RELIGION O PHONE IN O TRAVEL O
LEISURE O JAZZ O COUNTRY O
NATION M (music) O OLDIES O
or
Select one of the twenty-nine PTY
codes.
FOLK M (music) O DOCUMENT O
OFF O (back to the beginning)
Ex.: When “ROCK M” is selected
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Repeat steps 1 and 2 to store
other PTY codes into other preset
numbers.
What you can do with RDS
RDS (Radio Data System) allows FM
stations to send an additional signal along
with their regular programme signals.
By receiving the RDS data, this receiver can
do the following:
4 Finish the procedure.
•
Programme Type (PTY) Search (see page 10)
• Standby Reception of Traffic
Announcement —TA (see the following) or
your favorite programme (PTY) (see pages
12 and 21)
Using the standby receptions
•
Tracing the same programme automatically
—Network-Tracking Reception (see page 12)
TA Standby Reception
• Programme Search (see page 21)
TA Standby Reception allows the receiver to
switch temporarily to Traffic Announcement
(TA) from any source other than AM.
The volume changes to the preset TA volume
level (see page 21).
Storing your favorite programmes
You can store six favorite programme types.
To activate TA Standby Reception
Preset programme types in the number buttons
(1 –6):
The TP indicator either
lights up or flashes.
• If the TP indicator lights up, TA Standby
Reception is activated.
1 Perform steps ~ and Ÿ on page 10 to
select a PTY code.
• If the TP indicator flashes, TA Standby
Reception is not yet activated. (This occurs
when you are listening to an FM station
without the RDS signals required for TA
Standby Reception.)
2 Select the preset number (1 – 6) you
want to store into.
To activate TA Standby Reception, tune in to
another station providing these signals. The
TP indicator will stop flashing and remain lit.
To deactivate the TA Standby Reception
The TP indicator goes off.
Ex.: When “ROCK M” is selected
11
Download from Www.Somanuals.com. All Manuals Search And Download.
PTY Standby Reception
PTY Standby Reception allows the receiver
to switch temporarily to your favorite PTY
programme from any source other than AM.
Tracking the same programme—
Network-Tracking Reception
When driving in an area where FM reception
is not sufficient enough, this receiver
automatically tunes in to another FM RDS
station of the same network, possibly
broadcasting the same programme with stronger
signals (see the illustration below).
To activate and select your favorite PTY
code for PTY Standby Reception, see page
21.
The PTY indicator either lights up or flashes.
When shipped from the factory, Network-
Tracking Reception is activated.
To change the Network-Tracking Reception
setting, see page 21.
• If the PTY indicator lights up, PTY Standby
Reception is activated.
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
To activate PTY Standby Reception, tune in
to another station providing these signals. The
PTY indicator will stop flashing and remain
lit.
Programme A broadcasting on different
frequency areas (01 – 05)
To deactivate the PTY Standby Reception,
select “OFF” for the PTY code. The PTY
indicator goes off.
To check the current clock time while
listening to an FM RDS station
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc operations
Playing a disc
All tracks will be played
repeatedly until you stop
playback.
• When inserting an audio CD or a CD Text
disc:
About MP3 and WMA discs
MP3 and WMA (Windows Media® Audio)
“tracks” (words “file” and “track” are used
interchangeably) are recorded in “folders.”
• When inserting an MP3 or a WMA disc:
Total playing time of Total track number
the inserted disc
of the inserted disc
CD Text: Disc title/performer =
Track title appear automatically.
*
Total folder
number
Total file
number
Elapsed playing Current track
time
number
When playback starts, disc information will
automatically appear (see page 16).
To stop play and eject the disc
* Either the MP3 or WMA indicator lights up
depending on the first detected file.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
To fast-forward or reverse the track
To locate a particular track (for CD) or
folder (for MP3 or WMA discs) directly
To select a number from 01 – 06:
Fast-forwards.
Reverses.
To select a number from 07 – 12:
To go to the next or previous tracks
To the following
tracks.
• To select a particular track in a folder
(for MP3 or WMA disc) after selecting a
folder:
To the beginning of the current track, then
the previous tracks.
To go to the next or previous folders
(only for MP3 or WMA disc)
To next folders.
To previous folders.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Prohibiting disc ejection
You can lock a disc in the loading slot.
Other main functions
Skipping a track quickly during play
• For MP3 or WMA disc, you can skip a track
within the same folder.
Ex.: To select track 32 while playing track 6
1
To cancel the prohibition, repeat the same
procedure.
2
First time you press +10 or –10 button, the
track skips to the nearest higher or lower
track with a track number of multiple ten
(ex. 10th, 20th, 30th).
Then each time you press the button, you
can skip 10 tracks.
• After the last track, the first track will be
selected and vice versa.
3
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the display information
While playing an audio CD or a CD Text
*1 If the current disc is an audio CD, “NO NAME” appears.
While playing an MP3 or WMA disc
• When “TAG DISP” is set to “TAG ON” (see page 21)
*2 If an MP3/WMA file does not have ID3 tags, folder name and file name appear. In this
case, the TAG indicator will not light up.
• When “TAG DISP” is set to “TAG OFF”
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the playback modes
You can use only one of the following playback modes at a time.
1
2 Select your desired playback mode.
Repeat play
Mode
Plays repeatedly
TRK RPT:
The current track.
• RPT lights up.
FLDR RPT*: All tracks of the current folder.
and RPT light up.
•
Off:
Cancels repeat play.
Ex.: When “TRK RPT” is selected while
playing an MP3 disc
Random play
Mode
Plays at random
FLDR RND*: All tracks of the current folder,
then tracks of the next folder
and so on.
• RND and
DISC RND: All tracks of the current disc.
• RND and light up.
Cancels random play.
light up.
Off:
Ex.: When “DISC RND” is selected while
playing an MP3 disc
*Only while playing an MP3 or WMA disc.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound adjustments
Selecting preset sound modes (C-EQ: custom equalizer)
You can select a preset sound mode suitable to
the music genre.
Preset values
Indication
For:
1
2
3
*
*
*
BAS TRE LOUD
00 00 OFF
USER
ROCK
(Flat sound)
~
Ÿ
Rock or
disco music
+03 +01 ON
CLASSIC Classical
music
+01 –02 OFF
POPS
Light music +04 +01 OFF
HIP HOP Funk or rap
music
+02
00
ON
JAZZ
Jazz music
+02 +03 OFF
*1 BAS: Bass
*2 TRE: Treble
*3 LOUD: Loudness
Ex.: When “ROCK” is selected
Indication pattern for each sound mode:
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Indication
BAS*1
(bass)
To do:
Range
Adjusting the sound
You can adjust the sound characteristics to your
preference.
Adjust the bass.
–06 (min.)
to
+06 (max.)
TRE*1
(treble)
Adjust the treble.
–06 (min.)
to
1
+06 (max.)
FAD*2
(fader)
Adjust the front
and rear speaker
balance.
R06 (Rear
only)
to
F06 (Front
only)
Ex.: When “TRE” is selected
BAL
Adjust the left
L06 (Left
only)
to
(balance) and right speaker
balance.
2
R06 (Right
only)
LOUD*1
Boost low and
(loudness) high frequencies
LOUD ON
J
to produce a well- LOUD OFF
balanced sound at
low volume level.
Indication pattern changes as
you adjust the level.
VOL*3
Adjust the volume. 00 (min.) to
(volume)
30 or 50
(max.)*4
*1 When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including “USER.”
*2 If you are using a two-speaker system, set
the fader level to “00.”
*3 Normally the control dial works as the
volume control. So you do not have to select
“VOL” to adjust the volume level.
*4 Depending on the amplifier gain control
setting. (See page 21 for details.)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
General settings — PSM
3 Adjust the PSM item selected.
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the procedure.
2 Select a PSM item.
Ex.: When you select “DIMMER”
Indications
Selectable settings, [reference page]
DEMO
Display demonstration
DEMO ON: [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [7].
DEMO OFF: Cancels.
0 – 23 (1 – 12), [7]
CLOCK H
[Initial: 0 (0:00)]
Hour adjustment
00 – 59, [7]
CLOCK M
[Initial: 00 (0:00)]
Minute adjustment
12H O 24H, [7]
[Initial: 24H]
24H/12H
24 hours or 12 hours time
display
CLK ADJ
AUTO: [Initial]; The built-in clock is automatically adjusted
Clock adjustment
using the CT (clock time) data in the RDS signal.
OFF:
Cancels.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Indications
Selectable settings, [reference page]
AF-REG
When the received signals from the current station become weak...
Alternative frequency/
regionalization reception
AF:
[Initial]; Switches to another station (the programme
may differ from the one currently received), [12].
• The AF indicator lights up.
AF REG: Switches to another station broadcasting the same
programme.
• The AF and REG indicators light up.
OFF:
Cancels.
PTY STBY
[Initial: OFF]; Activates PTY Standby Reception with one of the
PTY standby
29 PTY codes, [12].
[Initial: VOL 20]; VOL 00 – VOL 30 or 50*, [11]
TA VOL
* Depends on the amplifier gain control.
Traffic announcement
volume
P-SEARCH
Programme search
ON:
Using the AF data, the receiver tunes in to another
frequency broadcasting the same programme as the
original preset RDS station is if the preset station
signals are not sufficient.
OFF:
[Initial]; Cancels.
DIMMER
ON:
Activates dimmer.
Dimmer
OFF:
[Initial]; Cancels.
TEL
MUTING 1/MUTING 2: Select either one which mutes the
Telephone muting
sounds while using the cellular phone.
OFF:
[Initial]; Cancels.
SCROLL
ONCE: [Initial]; Scrolls the disc information once.
Scroll
AUTO: Repeats scrolling (5-second intervals in between).
OFF:
Cancels.
• Pressing DISP for more than one second can scrolls the display
regardless of the setting.
TAG DISP
TAG ON:
[Initial]; Shows the ID3 tag while playing
Tag display
MP3/WMA tracks, [16].
TAG OFF: Cancels.
AMP GAIN
Amplifier gain control
You can change the maximum volume level of this receiver.
LOW PWR: VOL 00 – VOL 30 (Select this if the maximum
power of the speaker is less than 50 W to prevent
them from damaging the speaker.)
HIGH PWR: [Initial]; VOL 00 – VOL 50
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Detaching the control panel
When detaching or attaching the control panel,
Attaching the control panel
be careful not to damage the connectors on
the back of the control panel and on the panel
holder.
Detaching the control panel
Before detaching the control panel, be sure to
turn off the power.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote controller — RM-RK60
This receiver can be remotely controlled as
Main elements and features
instructed here (with an optionally purchased
remote controller). We recommend that you use
remote controller RM-RK60 with your receiver.
• When operating, aim the remote controller
directly at the remote sensor on the
receiver. Make sure there is no obstacle in
between.
Installing the lithium coin battery
(CR2025)
1
(standby/on attenuator) button
• Turns on and off the power and also
attenuates the sound.
2 SRC (source) button
• Selects the source.
Warning:
3 R (reverse) / F (forward) buttons
• Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if
pressed and held.
• Changes the tracks on the disc.
4 SOUND button
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
• Selects the sound mode (C-EQ: custom
equalizer).
5 U (up) / D (down) buttons
• U (up): Changes the FM/AM bands.
• D (down): Changes the preset stations.
• Changes the folder on the MP3/WMA
discs.
6 VOLUME +/– buttons
• Adjusts the volume level.
Caution:
The receiver is equipped with the steering
wheel remote control function.
• See the Installation/Connection Manual
(separate volume) for connection.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
How to clean the connectors
To keep discs clean
Frequent detachment will deteriorate the
connectors.
A dirty disc may not play correctly.
If a disc does become dirty, wipe
it with a soft cloth in a straight line
from center to edge.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
• Do not use any solvent (for
example, conventional record cleaner, spray,
thinner, benzine, etc.) to clean discs.
To play new discs
New discs may have some rough
spots around the inner and outer
edges. If such a disc is used, this
receiver may reject the disc.
Connector
To remove these rough spots, rub the edges
with a pencil or ball-point pen, etc.
Moisture condensation
Moisture may condense on the lens inside the
CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may
malfunction. In this case, eject the disc and
leave the receiver turned on for a few hours
until the moisture evaporates.
How to handle discs
When removing a disc from
its case, press down the center
holder of the case and lift the
disc out, holding it by the
edges.
Center holder
• Always hold the disc by the edges. Do not
touch its recording surface.
When storing a disc into its case, gently insert
the disc around the center holder (with the
printed surface facing up).
• Make sure to store discs into the cases after
use.
Do not use the following discs:
Stick-on
Sticker
Sticker
Warped
label
residue
Disc
disc
24
Download from Www.Somanuals.com. All Manuals Search And Download.
More about this receiver
Inserting a disc
• When a disc is inserted upside down, the disc
automatically ejects.
• Do not insert 8 cm discs (single CD) and
unusual shape discs (heart, flower, etc.) into
the loading slot.
Basic operations
Turning off the power
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
Playing a disc
• While fast-forwarding or reversing on an MP3
or WMA disc, you can only hear intermittent
sounds.
Tuner operations
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and
stations are stored newly.
Playing a CD-R or CD-RW
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in
No. 1 will be automatically tuned in.
• When storing a station manually, a previously
preset station is erased when a new station is
stored in the same preset number.
• Use only “finalized” CD-Rs or CD-RWs.
• This receiver can play back only the files of
the same type which is first detected if a disc
includes both audio CD (CD-DA) files and
MP3/WMA files.
• This receiver can play back multi-session
discs; however, unclosed sessions will be
skipped while playing.
• Some CD-Rs or CD-RWs may not play
back on this receiver because of their disc
characteristics, and for the following causes:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the receiver.
– The pickup lens inside the receiver is dirty.
– CD-R/CD-RW on which the files are
written with “Packet Write” method.
– There are improper recording conditions
(missing data, etc.) or media conditions
(stain, scratch, warp, etc.).
• CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower
than that of regular CDs.
FM RDS operations
• Network-Tracking Reception requires two
types of RDS signals—PI (Programme
Identification) and AF (Alternative
Frequency) to work correctly. Without
receiving these data correctly, Network-
Tracking Reception will not operate.
• If a Traffic Announcement is received, the
volume level (TA Volume) automatically
changes to the preset level.
Disc operations
General
• This receiver has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in audio CD (CD-DA),
MP3 and WMA format.
• Do not use the following CD-Rs or CD-RWs:
– Discs with stickers, labels, or protective seal
stuck to the surface.
• When a disc has been loaded, selecting “CD”
for the playback source starts disc play.
– Discs on which labels can be directly
printed by an ink jet printer.
Using these discs under high temperatures
or high humidity may cause malfunctions or
damage to discs.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
• This receiver cannot play back the following
files:
– MP3 files encoded with MP3i and MP3
PRO formats.
– MP3 files encoded in an unappropriated
format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless,
professional, and voice formats.
– WMA files which are not based upon
Windows Media® Audio.
– WMA formatted files copy-protected with
DRM.
– Files which have the data such as WAVE,
ATRAC3, etc.
Playing an MP3/WMA disc
• This receiver can play back MP3/WMA files
with the extension code <.mp3> or <.wma>
(regardless of the letter case—upper/lower).
• This receiver can show the names of albums,
artists (performer), and ID3 Tag (Version 1.0,
1.1, 2.2, 2.3, or 2.4) for MP3 files and for
WMA files.
• This receiver can handle only one-byte
characters. No other characters can be
correctly displayed.
• This receiver can play back MP3/WMA files
meeting the conditions below:
– Bit rate: 8 kbps — 320 kbps
– Sampling frequency:
• The search function works but search speed is
not constant.
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
– Disc format: ISO 9660 Level 1/ Level 2,
Romeo, Joliet, Windows long file name
• The maximum number of characters for file/
folder names vary among the disc format used
(includes 4 extension characters—<.mp3> or
<.wma>).
– ISO 9660 Level 1: up to 12 characters
– ISO 9660 Level 2: up to 31 characters
– Romeo*: up to 128 (72) characters
– Joliet*: up to 64 (36) characters
– Windows long file name*: up to 128 (72)
characters
* The parenthetic figure is the maximum
number of characters for file/folder names
in case the total number of files and folders
is 313 or more.
Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select “CD” for the playback
source, disc play starts from where it has been
stopped previously.
Ejecting a disc
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to prevent it from
dust. (Disc will not play this time.)
General settings—PSM
• If you change the “AMP GAIN” setting from
“HIGH PWR” to “LOW PWR” while the
volume level is set higher than “VOL 30,” the
receiver automatically changes the volume
level to “VOL 30.”
• This receiver can recognize the total of 512
files, of 200 folders, and of 8 hierarchies.
• This receiver can play back the files recorded
in VBR (variable bit rate).
The files recorded in VBR have a discrepancy
in elapsed time display, and do not show
the actual elapsed time. Especially, after
performing the search function, this difference
becomes noticeable.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Causes
Remedies
• Sound cannot be heard
from the speakers.
The volume level is set to
the minimum level.
Adjust it to the optimum
level.
Connections are incorrect.
Check the cords and
connections.
The built-in microcomputer
may have functioned
• The receiver does not
work at all.
Reset the receiver (see page
2).
incorrectly due to noise, etc.
• SSM automatic presetting Signals are too weak.
does not work.
Store stations manually.
Connect the aerial firmly.
Insert the disc correctly.
• Static noise while listening The aerial is not connected
to the radio.
firmly.
• Disc automatically ejects.
Disc is inserted upside
down.
• CD-R/CD-RW cannot be
played back.
CD-R/CD-RW is not
finalized.
• Insert a finalized CD-R/
CD-RW.
• Tracks on the CD-R/
CD-RW cannot be
skipped.
• Finalize the CD-R/CD-
RW with the component
which you used for
recording.
• Disc can be neither played Disc is locked.
back nor ejected.
Unlock the disc (see page
15).
The CD player may have
functioned incorrectly.
Eject the disc forcibly (see
page 2).
• Disc sound is sometimes
interrupted.
You are driving on rough
roads.
Stop playback while driving
on rough roads.
Disc is scratched.
Change the disc.
Connections are incorrect.
Check the cords and
connections.
• “NO DISC” appears on the No disc in the loading slot.
display.
Insert a disc into the loading
slot.
Disc is inserted incorrectly.
Insert the disc correctly.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptoms
Causes
Remedies
• Disc cannot be played
back.
No MP3/WMA tracks are
recorded on the disc.
Change the disc.
MP3/WMA tracks do not
have the extension code
<.mp3> or <.wma> in their
file names.
Add the extension code
<.mp3> or <.wma> to their
file names.
MP3/WMA tracks are not
recorded in the format
compliant with ISO 9660
Change the disc.
(Record MP3/WMA
tracks using a compliant
Level 1, Level 2, Romeo, or application.)
Joliet.
• Noise is generated.
Skip to another track or
The track played back
is not an MP3/WMA
track (although it has the
extension code <.mp3> or
<.wma>).
change the disc. (Do not add
the extension code <.mp3>
or <.wma> to non-MP3 or
WMA tracks.)
• A longer readout time is
Readout time varies due to
Do not use too many
required (“CHECK” keeps the complexity of the folder/ hierarchies and folders.
flashing on the display).
file configuration.
• Tracks cannot be played
Playback order is determined
back as you have intended when the files are recorded.
them to play.
• Elapsed playing time is not This sometimes occurs
correct.
during play. This is caused
by how the tracks are
recorded on the disc.
• “NO FILES” appears on
the display.
The current disc does not
contain any MP3/WMA
tracks.
Insert a disc that contains
MP3/WMA tracks.
• Correct characters are
not displayed (e.g. album
name).
This receiver can only
display alphabets (capital:
A – Z), numbers, and a
limited number of symbols.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AUDIO AMPLIFIER SECTION
Maximum Power Output:
CD PLAYER SECTION
Type: Compact disc player
Front: 50 W per channel
Rear: 50 W per channel
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Continuous Power Output (RMS):
Front: 19 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than 0.8%
total harmonic distortion.
Number of channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20 000 Hz
Dynamic Range:
96 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: Less than measurable limit
MP3 decoding format:
Rear: 19 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than 0.8%
total harmonic distortion.
MPEG1/2 Audio Layer 3
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Max. Bit Rate: 320 Kbps
WMA (Windows Media® Audio) decoding
format:
Bass:
10 dB at 100 Hz
Treble: 10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
Max. Bit Rate: 192 Kbps
GENERAL
Power Requirement:
Operating Voltage:
DC 14.4 V (11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature:
0°C to +40°C
TUNER SECTION
Frequency Range:
FM: 87.5 MHz to 108.0 MHz
AM: (MW) 522 kHz to 1 620 kHz
(LW) 144 kHz to 279 kHz
Dimensions (W × H × D):
Installation Size (approx.):
182 mm × 52 mm × 150 mm
Panel Size (approx.):
188 mm × 58 mm × 11 mm
Mass (approx.):
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
1.3 kg (excluding accessories)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 30 dB
Design and specifications are subject to change
without notice.
Capture Ratio: 1.5 dB
[MW Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50 µV
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Vous avez des PROBLÈMES de fonctionnement?
Réinitialisez votre appareil
Référez-vous à la page intitulée Comment réinitialiser votre appareil
EN, FR
© 2004 Victor Company of Japan, Limited
1004DTSMDTJEIN
Download from Www.Somanuals.com. All Manuals Search And Download.
KD-G411
Installation/Connection Manual
Manuel d’installation/raccordement
GET0257-010A
[EX/EU]
1004DTSMDTJEIN
EN, FR
ENGLISH
FRANÇAIS
This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If
your vehicle does not have this system, a voltage inverter is required, which can be purchased
at JVC IN-CAR ENTERTAINMENT dealers.
Cet appareil est conçu pour fonctionner sur des sources de courant continu de 12 V à masse
NEGATIVE. Si votre véhicule n’offre pas ce type d’alimentation, il vous faut un convertisseur de tension,
que vous pouvez acheter chez un revendeur d’autoradios JVC.
Parts list for installation and connection
The following parts are provided for this receiver.
After checking them, please set them correctly.
Liste des pièces pour l’installation et raccordement
Les pièces suivantes sont fournies avec cet appareil.
Après vérification, veuillez les placer correctement.
E
C
D
A / B
Power cord
Cordon d’alimentation
Sleeve
Manchon
Trim plate
Plaque d’assemblage
Hard case/Control panel
Etui de transport/Panneau de
commande
F
G
H
I
J
Washer (ø5)
Rondelle (ø5)
Lock nut (M5)
Ecrou d’arrêt (M5)
Mounting bolt (M5 x 20 mm)
Boulon de montage (M5 x 20 mm)
Rubber cushion
Amortisseur en caoutchouc
Handles
Poignées
INSTALLATION (IN-DASH MOUNTING)
The following illustration shows a typical installation. If you have any questions or require
information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a
company supplying kits.
INSTALLATION (MONTAGE DANS LE TABLEAU DE BORD)
L’illustration suivante est un exemple d’installation typique. Si vous avez des questions ou avez besoin
d’information sur des kits d’installation, consulter votre revendeur d’autoradios JVC ou une compagnie
d’approvisionnement.
•
If you are not sure how to install this receiver correctly, have it installed by a qualified technician.
• Si l’on n’est pas sûr de pouvoir installer correctement cet appareil, le faire installer par un technicien qualifié.
Do the required electrical connections.
Réalisez les connexions électriques.
*1 When you stand the receiver, be
careful not to damage the fuse on
the rear.
Bend the appropriate tabs to hold the
sleeve firmly in place.
Tordez les languettes appropriées pour
maintenir le manchon en place.
1
*
Lorsque vous mettez l’appareil à la
verticale, faire attention de ne pas
endommager le fusible situé sur l’arrière.
Removing the receiver / Retrait de l’appareil
Before removing the receiver, release the rear section.
Avant de retirer l’appareil, libérer la section arrière.
When using the optional stay / Lors When installing the receiver without using the sleeve / Lors de
de l’utilisation du hauban en option l’installation de l’appareil scans utiliser de manchon
In a Toyota for example, first remove the car radio and install the receiver in its place.
Stay (option)
Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la
Hauban (en option)
place.
Fire wall
Cloison
* Not included with this receiver.
Flat type screws
* Non fourni avec cet appareil.
(M5 x 8 mm)*
Vis à tête plate
(M5 x 8 mm)*
Dashboard
Tableau de
bord
Bracket*
Support*
Screw (option)
Vis (en option)
Flat type screws
(M5 x 8 mm)*
Vis à tête plate
(M5 x 8 mm)*
Pocket
Poche
Bracket*
Support*
Insert the two handles, then
pull them as illustrated so
that the receiver can be
removed.
Insérez les deux poignées, puis
tirez de la façon illustrée de
façon à retirer l’appareil.
Note
: When installing the receiver on the mounting bracket, make
sure to use the 8 mm-long screws. If longer screws are
used, they could damage the receiver.
Install the receiver at an
angle of less than 30˚.
Installez l’appareil avec un
angle de moins de 30˚.
Remarque : Lors de l’installation de l’appareil sur le support de montage,
s’assurer d’utiliser des vis d’une longueur de 8 mm. Si des vis plus
longues sont utilisées, elles peuvent endommager l’appareil.
PRECAUTIONS sur l’alimentation et la connexion
PRECAUTIONS on power supply and speaker
des enceintes:
connections:
• NE CONNECTEZ PAS les fils d’enceintes du cordon
d’alimentation à la batterie; sinon, l’appareil serait
sérieusement endommagé.
• DO NOT connect the speaker leads of the power cord to
the car battery; otherwise, the receiver will be seriously
damaged.
• AVANT de connecter les fils d’enceintes du cordon d’alimentation aux
enceintes, vérifiez le câblage des enceintes de votre voiture.
• BEFORE connecting the speaker leads of the power cord to the
speakers, check the speaker wiring in your car.
EN CAS DE DIFFICULTES
TROUBLESHOOTING
• Le fusible saute.
• The fuse blows.
* Les fils rouge et noir sont-ils racordés correctement?
* Are the red and black leads connected correctly?
• L’appareil ne peut pas être mise sous tension.
* Le fil jaune est-elle raccordée?
• Power cannot be turned on.
* Is the yellow lead connected?
• Pas de son des enceintes.
• No sound from the speakers.
* Le fil de sortie d’enceinte est-il court-circuité?
* Is the speaker output lead short-circuited?
• Le son est déformé.
* Le fil de sortie d’enceinte est-il à la masse?
* Les bornes “–” des enceintes gauche et droit sont-elles mises ensemble à la masse?
• Sound is distorted.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in common?
• Interférence avec les sons.
La prise arrière de mise à la terre est-elle connectée au châssis de la voiture avec un cordon court et épais?
• Noise interfere with sounds.
* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?
*
• L’appareil devient chaud.
* Le fil de sortie d’enceinte est-il à la masse?
* Les bornes “–” des enceintes gauche et droit sont-elles mises ensemble à la masse?
• Cet appareil ne fonctionne pas du tout.
* Avez-vous réinitialisé votre appareil?
• Receiver becomes hot.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in common?
• This receiver does not work at all.
* Have you reset your receiver?
1
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
FRANÇAIS
RACCORDEMENTS ELECTRIQUES
ELECTRICAL CONNECTIONS
Pour éviter tout court-circuit, nous vous recommandons de débrancher la borne négative de la batterie et
d’effectuer tous les raccordements électriques avant d’installer l’appareil.
• Assurez-vous de raccorder de nouveau la mise à la masse de cet appareil au châssis
de la voiture après l’installation.
To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and
make all electrical connections before installing the receiver.
• Be sure to ground this receiver to the car’s chassis again after installation.
Notes:
Remarques:
• Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC
IN-CAR ENTERTAINMENT dealer.
• Remplacer le fusible par un de la valeur précisée. Si le fusible saute souvent, consulter votre revendeur
d’autoradios JVC.
• It is recommended to connect to the speakers with maximum power of more than 50 W (both
at the rear and at the front, with an impedance of 4 Ω to 8 Ω). If the maximum power is less
than 50 W, change “AMP GAIN” setting to prevent the speakers
from being damaged (see page 21 of the INSTRUCTIONS).
• To prevent short-circuit, cover the terminals of the UNUSED
leads with insulating tape.
• Il est recommandé de connecter des enceintes avec une puissance de plus de 50 W (les enceintes arrière
et les enceintes avant, avec une impédance comprise entre 4 Ω et 8 Ω). Si la puissance maximum est
inférieure à 50 W, changez “AMP GAIN” pour éviter d’endommager vos enceintes (voir page 21 du
MANUEL D’INSTRUCTIONS).
• Pour éviter les court-circuits, couvrir les bornes des fils qui ne sont PAS UTILISÉS avec de la bande
isolante.
Heat sink
Dissipateur de chaleur
• The heat sink becomes very hot after use. Be
careful not to touch it when removing this receiver.
• Le dissipateur de chaleur devient très chaud après usage. Faire attention de ne pas le toucher en retirant
cet appareil.
A Typical connections / Raccordements typiques
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause Avant de commencer la connexion: Vérifiez attentivement le câblage du véhicule. Une
serious damage to this receiver.
The leads of the power cord and those of the connector from the car body may be different in
color.
connexion incorrecte peut endommager sérieusement l’appareil.
Le fil du cordon d’alimentation et ceux des connecteurs du châssis de la voiture peuvent être différents
en couleur.
1 Connect the colored leads of the power cord in the order specified in the illustration below.
2 Connect the aerial cord.
1
Connectez les fils colorés du cordon d’alimentation dans l’ordre spécifié sur l’illustration ci-dessous.
2 Connectez le cordon d’antenne.
3 Finally connect the wiring harness to the receiver.
3 Finalement, connectez le faisceau de fils à l’appareil.
Note: If your vehicle does not have any accessory terminal, move the fuse from the fuse
position 1 (initial position) to fuse position 2, and connect the red lead (A7) to the positive (+)
battery terminal.
Remarque: Si votre véhicule ne possède pas de borne accessoire, déplacez le fusible de la position de
fusible 1 (position originale) à la position de fusible 2 et connectez le fil rouge (A7) à la borne positive
(+) de la batterie.
• The yellow lead (A4) is not used in this case.
• Le fil jaune (A4) n’est pas utilisé dans ce cas.
To steering wheel remote controller (see diagram
)
Pour la télécommande de volant (voir le diagramme
)
Fuse position 2 / Position de fusible 2
Fuse position 1 / Position de fusible 1
Rear ground terminal
Borne arrière de masse
*1 Not included for this receiver
Ignition switch
15 A fuse
Fusible 15 A
1
*
Non fourni avec cet appareil
Interrupteur d’allumage
Line out (see diagram
)
Sortie de ligne
(voir le diagramme
Black
Noir
Aerial terminal
Borne de l’antenne
)
To metallic body or chassis of the car
Vers corps métallique ou châssis de la voiture
Yellow*2
To a live terminal in the fuse block connecting to the car battery
(bypassing the ignition switch) (constant 12 V)
Jaune*2
À une borne sous tension du porte-fusible connectée à la batterie de la voiture
(en dérivant l’interrupteur d’allumage) (12 V constant)
Red
Rouge
To an accessory terminal in the fuse block
Fuse block
Porte-fusible
Vers borne accessoire du porte-fusible
2
*
Before checking the operation of this receiver
prior to installation, this lead must be connected,
otherwise power cannot be turned on.
Pour vérifier le fonctionnement de cet appareil avant
installation, ce fil doit être raccordé, sinon l’appareil
ne peut pas être mis sous tension.
Blue with white stripe
Bleu avec bande blanche
To the remote lead of other equipment or power aerial if any (200 mA max.)
Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une
(200 mA max.)
2
*
Brown
Marron
To cellular phone system
À un système de téléphone cellulaire
White with black stripe
White
Gray with black stripe
Gray
Green with black stripe
Green
Purple with black stripe
Purple
Blanc avec bande noire
Blanc
Gris avec bande noire
Gris
Vert avec bande noire
Vert
Violet avec bande noire
Violet
Left speaker (front)
Right speaker (front)
Left speaker (rear)
Right speaker (rear)
Enceinte gauche (avant)
Enceinte droit (avant)
Enceinte gauche (arrière)
Enceinte droit (arrière)
B
Connecting the external amplifier / Connexion d’un amplificateur extérieur
You can connect an amplifier to upgrade your car stereo system.
• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so • Connectez le fil de commande à distance (bleu avec bande blanche) au fil de commande à distance de
that it can be controlled through this receiver.
l’autre appareil de façon qu’il puisse être commandé via cet appareil.
Vous pouvez connecter un amplificateur pour améliorer votre système autoradio.
• Disconnect the speakers from this receiver, connect them to the amplifier. Leave the • Déconnectez les enceintes de cet appareil et connectez-les à l’amplificateur. Laissez
speaker leads of this receiver unused.
les fils d’enceintes de cet appareil inutilisés.
Rear speakers
Enceintes arrière
Remote lead
Fil d’alimentation à distance
Y-connector (not supplied with this receiver)
Connecteur Y (non fourni avec cet appareil)
*3 Firmly attach the ground wire to the metallic
JVC Amplifier
JVC
Amplificateur
body or to the chassis of the car—to the place
not coated with paint (if coated with paint,
remove the paint before attaching the wire).
Failure to do so may cause damage to the
receiver.
Remote lead (Blue with white stripe)
Fil d’alimentation à distance (Bleu avec bande blanche)
Signal cord (not supplied with this receiver)
Cordon de signal (non fourni avec cet appareil)
3
*
Attachez solidement le fil de mise à la masse au
châssis métallique de la voiture—à un endroit qui
n’est pas recouvert de peinture (s’il est recouvert
de peinture, enlevez d’abord la peinture avant
d’attacher le fil). L’appareil peut être endommagé si
cela n’est pas fait correctement.
To the remote lead of other equipment or power
aerial if any
Au fil de télécommande de l’autre appareil ou à l’antenne
automatique s’il y en a une
Front speakers
Enceintes avant
C
Connecting to the steering wheel remote controller / Connexion de la télécommande de volant
If your car is equipped with the steering wheel remote controller, you can operate this receiver using the
OE remote adapter (not supplied)
Adaptateur pour télécommande au volant (non fourni)
controller. To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required.
Consult your JVC IN-CAR ENTERTAINMENT dealer for details.
Steering wheel remote input
Entrée de la télécommande de volant
Si votre voiture est munie d’une télécommande de volant, vous pouvez commander cet autoradio en utilisant la
télécommande. Pour le faire, un adaptateur pour télécommande au volant JVC (non fourni) correspondant à votre
voiture est nécessaire. Consultez votre revendeur d’autoradio JVC pour les détails.
Steering wheel remote controller (equipped in the car)
Télécommande de volant (installée dans la voiture)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CD RECEIVER
CD-RECEIVER
РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ
KD-G411
For canceling the display demonstration, see page 7.
Zum Abbrechen der Displaydemonstration siehe Seite 7.
Информацию об отмене демонстрации функций дисплея см. на стр. 7.
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Указания по установке и выполнению соединений приводятся в отдельной инструкции.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ
GET0257-006A
[EY]
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and
to obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Warning:
How to forcibly eject a disc
If a disc cannot be recognized by the
receiver or cannot be ejected, ejects the disc
as follows.
If you need to operate the receiver while
driving, be sure to look ahead carefully or
you may be involved in a traffic accident.
How to reset your unit
• If this does not work, try to reset your
receiver.
• Be careful not to drop the disc when it
ejects.
• This will reset the microcomputer. Your
preset adjustments will also be erased.
• If a disc is loaded, it will eject. Be careful
not to drop the disc.
For security reasons, a numbered ID card is provided with this receiver, and the same ID number is
imprinted on the receiver’s chassis. Keep the card in a safe place, as it will help the authorities to
identify your receiver if stolen.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
How to reset your unit ...........................
How to forcibly eject a disc...................
How to read this manual........................
How to use the MODE button...............
2
2
4
4
Sound adjustments ................18
Selecting preset sound modes
(C-EQ: custom equalizer) .................. 18
Adjusting the sound............................... 19
Control panel — KD-G411......... 5
Parts identification.................................
General settings — PSM .........20
5
Basic procedure ..................................... 20
Getting started....................... 6
Detaching the control
Basic operations..................................
Canceling the display demonstrations...
Setting the clock ....................................
6
7
7
panel ..................................22
Using the remote controller
— RM-RK60............................23
Main elements and features ...................... 23
Radio operations ................... 8
Listening to the radio...........................
Storing stations in memory....................
Listening to a preset station...................
8
9
9
Maintenance..........................24
More about this receiver ........25
Troubleshooting.....................27
Specifications.........................29
FM RDS operations.................10
Searching for your favorite FM RDS
programme....................................... 10
Storing your favorite programmes......... 11
Using the standby receptions................. 11
Tracking the same programme
—Network-Tracking Reception ........ 12
Disc operations ......................13
Playing a disc ..................................... 13
Other main functions ............................. 15
Changing the display information ......... 16
Selecting the playback modes................ 17
*Temperature inside the car....
*For safety....
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating the
unit.
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
How to read this manual
How to use the MODE button
If you press MODE, the receiver goes into
functions mode, then the number buttons and
5/∞ buttons work as different function buttons.
The following methods are used to made the
explanations simple and easy-to-understand:
• Some related tips and notes are explained in
“More about this receiver” (see page 25).
• Button operations are mainly explained with
the illustrations as follows:
Ex.: When number button 2 works as
MO (monaural) button.
Press briefly.
Press repeatedly.
Press either one.
Time countdown indicator
To use these buttons for original functions
again after pressing MODE, wait for
5 seconds without pressing any of these buttons
until the functions mode is cleared.
• Pressing MODE again also clears the
functions mode.
Press and hold until
your desired response
begins.
Press and hold both
buttons at the same
time.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel — KD-G411
Parts identification
Display window
1
(standby/on attenuator) button
;
a
4/¢
(control panel release) button
buttons
2 SEL (select) button
3 CD button
s ∞ (down) button / –10 button
4 FM/AM button
5 Loading slot
6 Display window
7 0 (eject) button
8 TP PTY (traffic programme/programme
type) button
9 Remote sensor
Display window
d Tuner reception indicators—
MO (monaural), ST (stereo)
f WMA indicator
g RDS indicators—TP, PTY, AF, REG
h MP3 indicator
j CD indicator
• You can control this receiver with an
optionally purchased remote controller.
• DO NOT expose the remote sensor to
strong light (direct sunlight or artificial
lighting).
k Playback mode / item indicators—
RND (random),
RPT (repeat)
l LOUD (loudness) indicator
/ EQ (equalizer) indicator
z Sound mode (C-EQ: custom equalizer)
indicators—ROCK, CLASSIC, POPS,
HIP HOP, JAZZ, USER
(disc),
(folder),
p 5 (up) button / +10 button
q Control dial
w Number buttons
e EQ (equalizer) button
r MO (monaural) button
t SSM (Strong-station Sequential Memory)
button
y RPT (repeat) button
u RND (random) button
i MODE button
•
also works as the time countdown
indicator.
x Disc information indicators—TAG (ID3
Tag), (folder), (track/file)
c Main display
v Source display / Volume level indicator
b Tr (track) indicator
o DISP (display) button
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Basic operations
To drop the volume in a moment (ATT)
~
Ÿ
To restore the sound, press it
again.
To turn off the power
You cannot select “CD” as the playback
source if there is no disc in the loading
slot.
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging the
speakers by the sudden increase of the output
level.
!
Volume level appears.
Volume level indicator
⁄
Adjust the sound as you want.
(See pages 18 and 19.)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Canceling the display
demonstrations
If no operations are done for about 20 seconds,
display demonstration starts.
Setting the clock
1
[Initial: DEMO ON]—see page 20.
1
2
2 Set the hour, minute, and clock
system.
1 Select “CLOCK H” (hour), then
adjust the hour.
2 Select “CLOCK M” (minute),
then adjust the minute.
3 Select “24H/12H,” then select
“24H” (hour) or “12H” (hour).
3
3 Finish the procedure.
To check the current clock time when the
power is turned off
4 Finish the procedure.
To activate the display demonstration
In step 3 above...
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operations
Listening to the radio
2 Select the desired station frequencies.
~
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
When an FM stereo broadcast is hard to
receive
1
Selected band appears.
Ÿ
Start searching for a station.
2
When a station is received, searching
stops.
To stop searching, press the same
button again.
Lights up when monaural mode is activated.
To tune in to a station manually
In step Ÿ above...
1
Reception improves, but stereo effect will
be lost.
To restore the stereo effect, repeat the same
procedure so that the MO indicator goes off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting—
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 – FM3)
you want to store into.
Preset number flashes for a while.
2
3
Listening to a preset station
1
2 Select the preset station (1 – 6) you
want.
“SSM” flashes, then disappears when
automatic presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
or
Manual presetting
Ex.:Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
To check the current clock time while
listening to an FM (non-RDS) or AM station
• For FM RDS stations, see page 12.
1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FM RDS operations
Searching for your favorite FM RDS programme
You can tune in to a station broadcasting your
favorite programme by searching for a PTY code.
!
Start searching for your favorite
programme.
~
The last selected PTY code appears.
If there is a station broadcasting a
programme of the same PTY code as
you have selected, that station is tuned
in.
Ÿ
Select one of your favorite
programme type.
PTY codes
NEWS O AFFAIRS O INFO O SPORT O
EDUCATE O DRAMA O CULTURE O
SCIENCE O VARIED O POP M (music)
O ROCK M (music) O EASY M (music) O
LIGHT M (music) O CLASSICS O
OTHER M (music) O WEATHER O
FINANCE O CHILDREN O SOCIAL O
RELIGION O PHONE IN O TRAVEL O
LEISURE O JAZZ O COUNTRY O
NATION M (music) O OLDIES O
or
Select one of the twenty-nine PTY
codes.
FOLK M (music) O DOCUMENT O
OFF O (back to the beginning)
Ex.: When “ROCK M” is selected
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Repeat steps 1 and 2 to store
other PTY codes into other preset
numbers.
What you can do with RDS
RDS (Radio Data System) allows FM
stations to send an additional signal along
with their regular programme signals.
By receiving the RDS data, this receiver can
do the following:
4 Finish the procedure.
•
Programme Type (PTY) Search (see page 10)
• Standby Reception of Traffic
Announcement —TA (see the following) or
your favorite programme (PTY) (see pages
12 and 21)
Using the standby receptions
•
Tracing the same programme automatically
—Network-Tracking Reception (see page 12)
TA Standby Reception
• Programme Search (see page 21)
TA Standby Reception allows the receiver to
switch temporarily to Traffic Announcement
(TA) from any source other than AM.
The volume changes to the preset TA volume
level (see page 21).
Storing your favorite programmes
You can store six favorite programme types.
To activate TA Standby Reception
Preset programme types in the number buttons
(1 –6):
The TP indicator either
lights up or flashes.
• If the TP indicator lights up, TA Standby
Reception is activated.
1 Perform steps ~ and Ÿ on page 10 to
select a PTY code.
• If the TP indicator flashes, TA Standby
Reception is not yet activated. (This occurs
when you are listening to an FM station
without the RDS signals required for TA
Standby Reception.)
2 Select the preset number (1 – 6) you
want to store into.
To activate TA Standby Reception, tune in to
another station providing these signals. The
TP indicator will stop flashing and remain lit.
To deactivate the TA Standby Reception
The TP indicator goes off.
Ex.: When “ROCK M” is selected
11
Download from Www.Somanuals.com. All Manuals Search And Download.
PTY Standby Reception
PTY Standby Reception allows the receiver
to switch temporarily to your favorite PTY
programme from any source other than AM.
Tracking the same programme—
Network-Tracking Reception
When driving in an area where FM reception
is not sufficient enough, this receiver
automatically tunes in to another FM RDS
station of the same network, possibly
broadcasting the same programme with stronger
signals (see the illustration below).
To activate and select your favorite PTY
code for PTY Standby Reception, see page
21.
The PTY indicator either lights up or flashes.
When shipped from the factory, Network-
Tracking Reception is activated.
To change the Network-Tracking Reception
setting, see page 21.
• If the PTY indicator lights up, PTY Standby
Reception is activated.
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
To activate PTY Standby Reception, tune in
to another station providing these signals. The
PTY indicator will stop flashing and remain
lit.
Programme A broadcasting on different
frequency areas (01 – 05)
To deactivate the PTY Standby Reception,
select “OFF” for the PTY code. The PTY
indicator goes off.
To check the current clock time while
listening to an FM RDS station
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc operations
Playing a disc
All tracks will be played
repeatedly until you stop
playback.
• When inserting an audio CD or a CD Text
disc:
About MP3 and WMA discs
MP3 and WMA (Windows Media® Audio)
“tracks” (words “file” and “track” are used
interchangeably) are recorded in “folders.”
• When inserting an MP3 or a WMA disc:
Total playing time of Total track number
the inserted disc
of the inserted disc
CD Text: Disc title/performer =
Track title appear automatically.
*
Total folder
number
Total file
number
Elapsed playing Current track
time
number
When playback starts, disc information will
automatically appear (see page 16).
To stop play and eject the disc
* Either the MP3 or WMA indicator lights up
depending on the first detected file.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
To fast-forward or reverse the track
To locate a particular track (for CD) or
folder (for MP3 or WMA discs) directly
To select a number from 01 – 06:
Fast-forwards.
Reverses.
To select a number from 07 – 12:
To go to the next or previous tracks
To the following
tracks.
• To select a particular track in a folder
(for MP3 or WMA disc) after selecting a
folder:
To the beginning of the current track, then
the previous tracks.
To go to the next or previous folders
(only for MP3 or WMA disc)
To next folders.
To previous folders.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Prohibiting disc ejection
You can lock a disc in the loading slot.
Other main functions
Skipping a track quickly during play
• For MP3 or WMA disc, you can skip a track
within the same folder.
Ex.: To select track 32 while playing track 6
1
To cancel the prohibition, repeat the same
procedure.
2
First time you press +10 or –10 button, the
track skips to the nearest higher or lower
track with a track number of multiple ten
(ex. 10th, 20th, 30th).
Then each time you press the button, you
can skip 10 tracks.
• After the last track, the first track will be
selected and vice versa.
3
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the display information
While playing an audio CD or a CD Text
*1 If the current disc is an audio CD, “NO NAME” appears.
While playing an MP3 or WMA disc
• When “TAG DISP” is set to “TAG ON” (see page 21)
*2 If an MP3/WMA file does not have ID3 tags, folder name and file name appear. In this
case, the TAG indicator will not light up.
• When “TAG DISP” is set to “TAG OFF”
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the playback modes
You can use only one of the following playback modes at a time.
1
2 Select your desired playback mode.
Repeat play
Mode
Plays repeatedly
TRK RPT:
The current track.
• RPT lights up.
FLDR RPT*: All tracks of the current folder.
and RPT light up.
•
Off:
Cancels repeat play.
Ex.: When “TRK RPT” is selected while
playing an MP3 disc
Random play
Mode
Plays at random
FLDR RND*: All tracks of the current folder,
then tracks of the next folder
and so on.
• RND and
DISC RND: All tracks of the current disc.
• RND and light up.
Cancels random play.
light up.
Off:
Ex.: When “DISC RND” is selected while
playing an MP3 disc
*Only while playing an MP3 or WMA disc.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound adjustments
Selecting preset sound modes (C-EQ: custom equalizer)
You can select a preset sound mode suitable to
the music genre.
Preset values
Indication
For:
1
2
3
*
*
*
BAS TRE LOUD
00 00 OFF
USER
ROCK
(Flat sound)
~
Ÿ
Rock or
disco music
+03 +01 ON
CLASSIC Classical
music
+01 –02 OFF
POPS
Light music +04 +01 OFF
HIP HOP Funk or rap
music
+02
00
ON
JAZZ
Jazz music
+02 +03 OFF
*1 BAS: Bass
*2 TRE: Treble
*3 LOUD: Loudness
Ex.: When “ROCK” is selected
Indication pattern for each sound mode:
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Indication
BAS*1
(bass)
To do:
Range
Adjusting the sound
You can adjust the sound characteristics to your
preference.
Adjust the bass.
–06 (min.)
to
+06 (max.)
TRE*1
(treble)
Adjust the treble.
–06 (min.)
to
1
+06 (max.)
FAD*2
(fader)
Adjust the front
and rear speaker
balance.
R06 (Rear
only)
to
F06 (Front
only)
Ex.: When “TRE” is selected
BAL
Adjust the left
L06 (Left
only)
to
(balance) and right speaker
balance.
2
R06 (Right
only)
LOUD*1
Boost low and
(loudness) high frequencies
LOUD ON
J
to produce a well- LOUD OFF
balanced sound at
low volume level.
Indication pattern changes as
you adjust the level.
VOL*3
Adjust the volume. 00 (min.) to
(volume)
30 or 50
(max.)*4
*1 When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including “USER.”
*2 If you are using a two-speaker system, set
the fader level to “00.”
*3 Normally the control dial works as the
volume control. So you do not have to select
“VOL” to adjust the volume level.
*4 Depending on the amplifier gain control
setting. (See page 21 for details.)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
General settings — PSM
3 Adjust the PSM item selected.
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the procedure.
2 Select a PSM item.
Ex.: When you select “DIMMER”
Indications
Selectable settings, [reference page]
DEMO
Display demonstration
DEMO ON: [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [7].
DEMO OFF: Cancels.
0 – 23 (1 – 12), [7]
CLOCK H
[Initial: 0 (0:00)]
Hour adjustment
00 – 59, [7]
CLOCK M
[Initial: 00 (0:00)]
Minute adjustment
12H O 24H, [7]
[Initial: 24H]
24H/12H
24 hours or 12 hours time
display
CLK ADJ
AUTO: [Initial]; The built-in clock is automatically adjusted
Clock adjustment
using the CT (clock time) data in the RDS signal.
OFF:
Cancels.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Indications
Selectable settings, [reference page]
AF-REG
When the received signals from the current station become weak...
Alternative frequency/
regionalization reception
AF:
[Initial]; Switches to another station (the programme
may differ from the one currently received), [12].
• The AF indicator lights up.
AF REG: Switches to another station broadcasting the same
programme.
• The AF and REG indicators light up.
OFF:
Cancels.
PTY STBY
[Initial: OFF]; Activates PTY Standby Reception with one of the
PTY standby
29 PTY codes, [12].
[Initial: VOL 20]; VOL 00 – VOL 30 or 50*, [11]
TA VOL
* Depends on the amplifier gain control.
Traffic announcement
volume
P-SEARCH
Programme search
ON:
Using the AF data, the receiver tunes in to another
frequency broadcasting the same programme as the
original preset RDS station is if the preset station
signals are not sufficient.
OFF:
[Initial]; Cancels.
DIMMER
ON:
Activates dimmer.
Dimmer
OFF:
[Initial]; Cancels.
TEL
MUTING 1/MUTING 2: Select either one which mutes the
Telephone muting
sounds while using the cellular phone.
OFF:
[Initial]; Cancels.
SCROLL
ONCE: [Initial]; Scrolls the disc information once.
Scroll
AUTO: Repeats scrolling (5-second intervals in between).
OFF:
Cancels.
• Pressing DISP for more than one second can scrolls the display
regardless of the setting.
TAG DISP
TAG ON:
[Initial]; Shows the ID3 tag while playing
Tag display
MP3/WMA tracks, [16].
TAG OFF: Cancels.
AMP GAIN
Amplifier gain control
You can change the maximum volume level of this receiver.
LOW PWR: VOL 00 – VOL 30 (Select this if the maximum
power of the speaker is less than 50 W to prevent
them from damaging the speaker.)
HIGH PWR: [Initial]; VOL 00 – VOL 50
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Detaching the control panel
When detaching or attaching the control panel,
Attaching the control panel
be careful not to damage the connectors on
the back of the control panel and on the panel
holder.
Detaching the control panel
Before detaching the control panel, be sure to
turn off the power.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote controller — RM-RK60
This receiver can be remotely controlled as
Main elements and features
instructed here (with an optionally purchased
remote controller). We recommend that you use
remote controller RM-RK60 with your receiver.
• When operating, aim the remote controller
directly at the remote sensor on the
receiver. Make sure there is no obstacle in
between.
Installing the lithium coin battery
(CR2025)
1
(standby/on attenuator) button
• Turns on and off the power and also
attenuates the sound.
2 SRC (source) button
• Selects the source.
Warning:
3 R (reverse) / F (forward) buttons
• Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if
pressed and held.
• Changes the tracks on the disc.
4 SOUND button
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
• Selects the sound mode (C-EQ: custom
equalizer).
5 U (up) / D (down) buttons
• U (up): Changes the FM/AM bands.
• D (down): Changes the preset stations.
• Changes the folder on the MP3/WMA
discs.
6 VOLUME +/– buttons
• Adjusts the volume level.
Caution:
The receiver is equipped with the steering
wheel remote control function.
• See the Installation/Connection Manual
(separate volume) for connection.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
How to clean the connectors
To keep discs clean
Frequent detachment will deteriorate the
connectors.
A dirty disc may not play correctly.
If a disc does become dirty, wipe
it with a soft cloth in a straight line
from center to edge.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
• Do not use any solvent (for
example, conventional record cleaner, spray,
thinner, benzine, etc.) to clean discs.
To play new discs
New discs may have some rough
spots around the inner and outer
edges. If such a disc is used, this
receiver may reject the disc.
Connector
To remove these rough spots, rub the edges
with a pencil or ball-point pen, etc.
Moisture condensation
Moisture may condense on the lens inside the
CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may
malfunction. In this case, eject the disc and
leave the receiver turned on for a few hours
until the moisture evaporates.
How to handle discs
When removing a disc from
its case, press down the center
holder of the case and lift the
disc out, holding it by the
edges.
Center holder
• Always hold the disc by the edges. Do not
touch its recording surface.
When storing a disc into its case, gently insert
the disc around the center holder (with the
printed surface facing up).
• Make sure to store discs into the cases after
use.
Do not use the following discs:
Stick-on
Sticker
Sticker
Warped
label
residue
Disc
disc
24
Download from Www.Somanuals.com. All Manuals Search And Download.
More about this receiver
Inserting a disc
• When a disc is inserted upside down, the disc
automatically ejects.
• Do not insert 8 cm discs (single CD) and
unusual shape discs (heart, flower, etc.) into
the loading slot.
Basic operations
Turning off the power
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
Playing a disc
• While fast-forwarding or reversing on an MP3
or WMA disc, you can only hear intermittent
sounds.
Tuner operations
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and
stations are stored newly.
Playing a CD-R or CD-RW
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in
No. 1 will be automatically tuned in.
• When storing a station manually, a previously
preset station is erased when a new station is
stored in the same preset number.
• Use only “finalized” CD-Rs or CD-RWs.
• This receiver can play back only the files of
the same type which is first detected if a disc
includes both audio CD (CD-DA) files and
MP3/WMA files.
• This receiver can play back multi-session
discs; however, unclosed sessions will be
skipped while playing.
• Some CD-Rs or CD-RWs may not play
back on this receiver because of their disc
characteristics, and for the following causes:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the receiver.
– The pickup lens inside the receiver is dirty.
– CD-R/CD-RW on which the files are
written with “Packet Write” method.
– There are improper recording conditions
(missing data, etc.) or media conditions
(stain, scratch, warp, etc.).
• CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower
than that of regular CDs.
FM RDS operations
• Network-Tracking Reception requires two
types of RDS signals—PI (Programme
Identification) and AF (Alternative
Frequency) to work correctly. Without
receiving these data correctly, Network-
Tracking Reception will not operate.
• If a Traffic Announcement is received, the
volume level (TA Volume) automatically
changes to the preset level.
Disc operations
General
• This receiver has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in audio CD (CD-DA),
MP3 and WMA format.
• Do not use the following CD-Rs or CD-RWs:
– Discs with stickers, labels, or protective seal
stuck to the surface.
• When a disc has been loaded, selecting “CD”
for the playback source starts disc play.
– Discs on which labels can be directly
printed by an ink jet printer.
Using these discs under high temperatures
or high humidity may cause malfunctions or
damage to discs.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
• This receiver cannot play back the following
files:
– MP3 files encoded with MP3i and MP3
PRO formats.
– MP3 files encoded in an unappropriated
format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless,
professional, and voice formats.
– WMA files which are not based upon
Windows Media® Audio.
– WMA formatted files copy-protected with
DRM.
– Files which have the data such as WAVE,
ATRAC3, etc.
Playing an MP3/WMA disc
• This receiver can play back MP3/WMA files
with the extension code <.mp3> or <.wma>
(regardless of the letter case—upper/lower).
• This receiver can show the names of albums,
artists (performer), and ID3 Tag (Version 1.0,
1.1, 2.2, 2.3, or 2.4) for MP3 files and for
WMA files.
• This receiver can handle only one-byte
characters. No other characters can be
correctly displayed.
• This receiver can play back MP3/WMA files
meeting the conditions below:
– Bit rate: 8 kbps — 320 kbps
– Sampling frequency:
• The search function works but search speed is
not constant.
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
– Disc format: ISO 9660 Level 1/ Level 2,
Romeo, Joliet, Windows long file name
• The maximum number of characters for file/
folder names vary among the disc format used
(includes 4 extension characters—<.mp3> or
<.wma>).
– ISO 9660 Level 1: up to 12 characters
– ISO 9660 Level 2: up to 31 characters
– Romeo*: up to 128 (72) characters
– Joliet*: up to 64 (36) characters
– Windows long file name*: up to 128 (72)
characters
* The parenthetic figure is the maximum
number of characters for file/folder names
in case the total number of files and folders
is 313 or more.
Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select “CD” for the playback
source, disc play starts from where it has been
stopped previously.
Ejecting a disc
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to prevent it from
dust. (Disc will not play this time.)
General settings—PSM
• If you change the “AMP GAIN” setting from
“HIGH PWR” to “LOW PWR” while the
volume level is set higher than “VOL 30,” the
receiver automatically changes the volume
level to “VOL 30.”
• This receiver can recognize the total of 512
files, of 200 folders, and of 8 hierarchies.
• This receiver can play back the files recorded
in VBR (variable bit rate).
The files recorded in VBR have a discrepancy
in elapsed time display, and do not show
the actual elapsed time. Especially, after
performing the search function, this difference
becomes noticeable.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Causes
Remedies
• Sound cannot be heard
from the speakers.
The volume level is set to
the minimum level.
Adjust it to the optimum
level.
Connections are incorrect.
Check the cords and
connections.
The built-in microcomputer
may have functioned
• The receiver does not
work at all.
Reset the receiver (see page
2).
incorrectly due to noise, etc.
• SSM automatic presetting Signals are too weak.
does not work.
Store stations manually.
Connect the aerial firmly.
Insert the disc correctly.
• Static noise while listening The aerial is not connected
to the radio.
firmly.
• Disc automatically ejects.
Disc is inserted upside
down.
• CD-R/CD-RW cannot be
played back.
CD-R/CD-RW is not
finalized.
• Insert a finalized CD-R/
CD-RW.
• Tracks on the CD-R/
CD-RW cannot be
skipped.
• Finalize the CD-R/CD-
RW with the component
which you used for
recording.
• Disc can be neither played Disc is locked.
back nor ejected.
Unlock the disc (see page
15).
The CD player may have
functioned incorrectly.
Eject the disc forcibly (see
page 2).
• Disc sound is sometimes
interrupted.
You are driving on rough
roads.
Stop playback while driving
on rough roads.
Disc is scratched.
Change the disc.
Connections are incorrect.
Check the cords and
connections.
• “NO DISC” appears on the No disc in the loading slot.
display.
Insert a disc into the loading
slot.
Disc is inserted incorrectly.
Insert the disc correctly.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptoms
Causes
Remedies
• Disc cannot be played
back.
No MP3/WMA tracks are
recorded on the disc.
Change the disc.
MP3/WMA tracks do not
have the extension code
<.mp3> or <.wma> in their
file names.
Add the extension code
<.mp3> or <.wma> to their
file names.
MP3/WMA tracks are not
recorded in the format
compliant with ISO 9660
Change the disc.
(Record MP3/WMA
tracks using a compliant
Level 1, Level 2, Romeo, or application.)
Joliet.
• Noise is generated.
Skip to another track or
The track played back
is not an MP3/WMA
track (although it has the
extension code <.mp3> or
<.wma>).
change the disc. (Do not add
the extension code <.mp3>
or <.wma> to non-MP3 or
WMA tracks.)
• A longer readout time is
Readout time varies due to
Do not use too many
required (“CHECK” keeps the complexity of the folder/ hierarchies and folders.
flashing on the display).
file configuration.
• Tracks cannot be played
Playback order is determined
back as you have intended when the files are recorded.
them to play.
• Elapsed playing time is not This sometimes occurs
correct.
during play. This is caused
by how the tracks are
recorded on the disc.
• “NO FILES” appears on
the display.
The current disc does not
contain any MP3/WMA
tracks.
Insert a disc that contains
MP3/WMA tracks.
• Correct characters are
not displayed (e.g. album
name).
This receiver can only
display alphabets (capital:
A – Z), numbers, and a
limited number of symbols.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AUDIO AMPLIFIER SECTION
Maximum Power Output:
CD PLAYER SECTION
Type: Compact disc player
Front: 50 W per channel
Rear: 50 W per channel
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Continuous Power Output (RMS):
Front: 19 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than 0.8%
total harmonic distortion.
Number of channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20 000 Hz
Dynamic Range:
96 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: Less than measurable limit
MP3 decoding format:
Rear: 19 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than 0.8%
total harmonic distortion.
MPEG1/2 Audio Layer 3
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Max. Bit Rate: 320 Kbps
WMA (Windows Media® Audio) decoding
format:
Bass:
10 dB at 100 Hz
Treble: 10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
Max. Bit Rate: 192 Kbps
GENERAL
Power Requirement:
Operating Voltage:
DC 14.4 V (11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature:
0°C to +40°C
TUNER SECTION
Frequency Range:
FM: 87.5 MHz to 108.0 MHz
AM: (MW) 522 kHz to 1 620 kHz
(LW) 144 kHz to 279 kHz
Dimensions (W × H × D):
Installation Size (approx.):
182 mm × 52 mm × 150 mm
Panel Size (approx.):
188 mm × 58 mm × 11 mm
Mass (approx.):
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
1.3 kg (excluding accessories)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 30 dB
Design and specifications are subject to change
without notice.
Capture Ratio: 1.5 dB
[MW Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50 µV
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Haben Sie PROBLEME mit dem Betrieb?
Bitte setzen Sie Ihr Gerät zurück
Siehe Seite Zurücksetzen des Geräts
Затруднения при эксплуатации?
Пожалуйста, перезагрузите Ваше устройство
Для получения информации о перезагрузке Вашего
устройства обратитесь на соответствующую страницу
EN, GE, RU
© 2004 Victor Company of Japan, Limited
1004DTSMDTJEIN
Download from Www.Somanuals.com. All Manuals Search And Download.
KD-G411
Installation/Connection Manual
Einbau/Anschlußanleitung
Руководство по установке/подключению
GET0257-013A
[EY]
1004DTSMDTJEIN
EN, GE, RU
ENGLISH
DEUTSCH
РУССКИЙ
This receiver is designed to operate on 12 V DC, NEGATIVE
ground electrical systems. If your vehicle does not have this mit 12 V Gleichstrom und (–) Erdung ausgelegt. Verfügt
system, a voltage inverter is required, which can be purchased Ihr Fahrzeug nicht über diese Anlage, ist ein Spannungsinverter
Dieses Gerät ist für einen Betrieb in elektrischen Anlagen
Это устройство разработано для эксплуатации на 12 В
постоянного напряжения с минусом на массе. Если
Ваш автомобиль не имеет этой системы, требуется
инвертор напряжения, который может быть приобретен у
дилера автомобилнего специалиста JVC.
at JVC IN-CAR ENTERTAINMENT dealers.
erforderlich, der bei JVC Autoradiohändler erworben werden kann.
Список деталей для установки и подключения
Следующие детали поставлены в комплекте с
устройством.
Parts list for installation and connection
The following parts are provided for this receiver.
After checking them, please set them correctly.
Teileliste für den Einbau und Anschluß
Die folgenden Teile werden zusammen mit diesem Gerät geliefert.
Nach ihrer Überprüfung, die Teile richtig einsetzen.
После проверки комплектации, пожалуйста, установите
их правильно.
A / B
C
D
Hard case/Control panel
Etui/Schalttafel
Жесткий футляр/панель управления
Sleeve
Halterung
Муфта
Trim plate
Frontrahmen
Декоративную панель
E
F
G
Power cord
Stromkable
Кабель питания
Washer (ø5)
Unterlegscheibe (ø5)
Шайба (њ5)
Lock nut (M5)
Sicherungsmutter (M5)
Фиксирующая гайка (M5)
J
H
I
Handles
Griffe
Рычаги
Mounting bolt (M5 x 20 mm)
Befestigungsschraube (M5 x 20 mm)
Крепежный болт (M5 x 20 мм)
Rubber cushion
Gummipuffer
Резиновый чехол
УСТАНОВКА (УСТАНОВКА В
ПРИБОРНУЮ ПАНЕЛЬ)
На следующих иллюстрациях показана типовая установка.
Если у Вас есть какие-либо вопросы, касающиеся
установки, обратитесь к Вашему дилеру автомобилнего
специалиста JVC или в компанию, поставляющую
соответствующие принадлежности.
INSTALLATION
EINBAU
(IN-DASH MOUNTING)
The following illustration shows a typical installation. If you
(IM ARMATURENBRETT)
Die folgende Abbildung zeigt einen typischen Einbau. Bei
have any questions or require information regarding installation irgendwelchen Fragen oder wenn Sie Informationen hinsichtlich
kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a
company supplying kits.
• If you are not sure how to install this receiver correctly, have it vertreibt.
installed by a qualified technician. • Sind Sie sich über den richtigen Einbau des Geräts nicht sicher,
lassen Sie es von einem qualifizierten Techniker einbauen.
des Einbausatzes brauchen, wenden Sie sich an ihren JVC
Autoradiohändler oder ein Unternehmen das diese Einbausätze
• Если Вы не знаете точно, как следует устанавливать
это устройство, обратитесь к квалифицированному
специалисту.
Do the required electrical connections.
Nehmen Sie die erforderlichen elektrischen
Anschlüsse vor.
Выполните необходимые подключения
контактов, как показано на оборотной
стороне этой инструкции.
*1 When you stand the receiver, be
careful not to damage the fuse
on the rear.
1
*
Beim Aufstellen des Geräts darauf
achten, daß die Sicherung auf der
Rückseite nicht beschädigt wird.
Bend the appropriate tabs to hold
the sleeve firmly in place.
*1 Устанавливайте устройство
таким образом, чтобы не
повредить предохранитель,
расположенный сзади.
Die geeigneten Zapfen biegen, um die
Manschette sicher festzuhalten.
Отогните соответствующие
фиксаторы, предназначенные
для прочной установки корпуса.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Удаление устройства
Перед удалением устройства освободите заднюю часть.
Removing the receiver
Before removing the receiver, release the rear section.
Ausbau des Geräts
Vor dem Ausbau des Geräts den hinteren Teil freigeben.
Insert the two handles, then pull them as
illustrated so that the receiver can be removed.
Die beiden Handgriffe einsetzen und dann ziehen wie
in der Abbildung gezeigt, so daß das Gerät entfernt
werden kann.
Вставьте два рычажка, затем потяните
их, как показано на рисунке, чтобы вынуть
устройство.
When using the optional stay / Beim Verwenden der
When installing the receiver without using the sleeve / Beim Einbau des Geräts
Anker-Option / При использовании дополнительной стойки ohne Halterung / При установке устройства без использования муфты
In a Toyota for example, first remove the car radio and install the receiver in its place.
Zum Beispiel in einem Toyota zuerst das Autoradio ausbauen und dann das Gerät an seinem Platz einbauen.
В автомобилях “Toyota”, например, сначала удалите автомобильную магнитолу, затем установите на
ее место это устройство.
Fire wall
Feuerwand
Стена
Stay (option)
Anker (Option)
Стойка
Flat type screws (M5 x 8 mm)*
Senkkopfschrauben (M5 x 8 mm)*
Крепежные винты (M5 x 8 мм)*
* Not included with this receiver.
* Nicht Teil dieses Geräts.
* Не входят в комплект.
(дополнительно)
Dashboard
Armaturenbrett
Приборная панель
Bracket*
Konsole*
Кронштейн*
Screw (option)
Schraube (Option)
Винт (дополнительно)
Flat type screws (M5 x 8 mm)*
Senkkopfschrauben (M5 x 8 mm)*
Крепежные винты (M5 x 8 мм)*
Pocket
Taschen
Карман
Bracket*
Konsole*
Кронштейн*
Note
: When installing the receiver on the mounting bracket, make sure to use the 8 mm-long
screws. If longer screws are used, they could damage the receiver.
Install the receiver at an angle of less than 30˚.
Stellen Sie das Gerät mit einem Winkel von weniger
als 30˚ auf.
Установите устройство под углом менее
30°.
Hinweis
: Beim Anbringen des Gerät an der Konsole sicherstellen, daß 8 mm lange Schrauben verwendet
werden. Werden längere Schrauben verwendet, können sie das Gerät beschädigen.
Примечание : При установке устройства на крепежный кронштейн, используйте только винты
длиной 8 мм. При использовании более длинных винтов можно повредить устройство.
ЭЛЕКТРИЧЕСКИЕ ПОДКЛЮЧЕНИЯ
ELECTRICAL CONNECTIONS
ELEKTRISCHE ANSCHLÜSSE
Для предотвращения коротких замыканий мы
рекомендуем Вам отсоединить отрицательный разъем
аккумулятора и осуществить все подключения перед
установкой устройства.
• После установки обязательно заземлите данное
устройство на шасси автомобиля.
To prevent short circuits, we recommend that you disconnect
the battery’s negative terminal and make all electrical
connections before installing the receiver.
• Be sure to ground this receiver to the car’s chassis
again after installation.
Zur Vermeidung von Kurzschlüssen empfehlen wir, daß Sie
den negativen Batterieanschluß abtrennen und alle elektrischen
Anschlüsse herstellen, bevor das Gerät eingebaut wird.
• Sicherstellen, daß das Gerät nach dem Einbau a
Chassis des Fahrzeugs geerdet wird.
Notes:
Hinweise:
Примечания:
• Replace the fuse with one of the specified rating. If
the fuse blows frequently, consult your JVC IN-CAR
ENTERTAINMENT dealer.
• Die Sicherung mit einer der entsprechenden Nennleistung ersetzen.
Brennt die Sicherung häufig durch, wenden Sie sich an ihren JVC
Autoradiohändler.
• Заменяйте предохранитель другим предохранителем
указанного класса. Если предохранитель сгорает
слишком часто, обратитесь к дилеру автомобилнего
специалиста JVC.
• Рекомендуется подключать динамики с максимальной
мощностью более 50 Вт (к задней и передней панели
устройства, с полным сопротивлением от 4 Ω до 8 Ω).
Если максимальная мощность динамиков менее 50 Вт,
перейдите в режим “AMP GAIN”, чтобы предотвратить
их повреждение (см. ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ
на стр. 21).
• Для предотвращения короткого замыкания заклейте
НЕИСПОЛЬЗУЕМЫЕ концы изолирующей лентой.
• Радиатор во время использования сильно нагревается.
Старайтесь его не трогать во время удаления
устройства.
• It is recommended to connect to the speakers with maximum • Es wird empfohlen, Lautsprecher mit einer Maximalleistung von
power of more than 50 W (both at the rear and at the front,
with an impedance of 4 Ω to 8 Ω). If the maximum power
is less than 50 W, change “AMP GAIN” setting to prevent
the speakers from being damaged (see page 21 of the
INSTRUCTIONS).
• To prevent short-circuit, cover the terminals of the UNUSED
leads with insulating tape.
• The heat sink becomes very hot after use. Be careful not to
touch it when removing this receiver.
mehr als 50 W anzuschließen (sowohl hinten als auch vorne, mit
einer Impedanz von 4 Ω bis 8 Ω). Wenn die Maximalleistung
weniger als 50 W beträgt, stellen Sie „AMP GAIN“ anders ein, um
Schäden an den Lautsprechern zu vermeiden (siehe Seite 21 der
BEDIENUNGSANLEITUNG).
• Zur Vermeidung eines Kurzschlusses die Anschlußklemmen
der NICHT VERWENDETEN Leitungen mit Isolierklebeband
umwickeln.
• Das Abstrahlblech wird nach dem Gebrauch sehr heiß. Beim
Ausbau des Geräts darauf achten, das Abstrahlblech nicht zu
berühren.
Heat sink
Abstrahlblech
Радиатор
BЫЯВЛЕНИЕ НЕИСПРАВНОСТЕЙ
TROUBLESHOOTING
FEHLERSUCHE
• Сработал предохранитель.
• The fuse blows.
• Die Sicherung brennt durch.
* Правильно ли подключены черный и красный провода?
* Are the red and black leads connected correctly?
* Sind die roten und schwarzen Leitungen richtig angeschlossen?
• Питание не включается.
* Подключен ли желтый провод?
• Power cannot be turned on.
* Is the yellow lead connected?
• Stromversorgung kann nicht eingeschaltet werden.
* Ist die gelbe Leitung angeschlossen?
• Звук не выводится через громкоговорители.
* Нет ли короткого замыкания на кабеле выхода
громкоговорителей?
• No sound from the speakers.
* Is the speaker output lead short-circuited?
• Kein Ton aus den Lautsprechern.
*
Ist die Lautsprecherausgangsleitung kurzgeschlossen?
• Sound is distorted.
• Ton verzerrt.
• Звук искажен.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in
common?
* Ist die Lautsprecherausgangsleitung geerdet?
* Sind die (–) Anschlußklemmen der linken und rechten Lautsprecher
zusammen geerdet?
* Заземлен ли провод выхода громкоговорителей?
* Заземлены ли разъемы “–” правого (R) и левого (L)
громкоговорителей?
• Noise interfere with sounds.
* Is the rear ground terminal connected to the car’s chassis
using shorter and thicker cords?
• Störgeräusche im Klang.
* Ist die hintere Erdungsklemme mit kürzeren und dickeren Kabeln
an das Fahrzeugchassis angeschlossen?
• Шум мешает звучанию.
* Соединен ли находящийся сзади зажим заземления с
шасси автомобиля с помощью более короткого и тонкого
шнуров?
• Receiver becomes hot.
• Gerät wird heiß.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in
common?
* Ist die Lautsprecherausgangsleitung geerdet?
* Sind die (–) Anschlußklemmen der linken und rechten Lautsprecher
zusammen geerdet?
• Устройство нагревается.
* Заземлен ли провод выхода громкоговорителей?
* Заземлены ли разъемы “–” правого (R) и левого (L)
громкоговорителей?
• This receiver does not work at all.
* Have you reset your receiver?
• Dieser Receiver funktioniert überhaupt nicht.
* Haben Sie einen Reset am Receiver vorgenommen?
• Приемник не работает.
* Выполнена ли перенастройка приемника?
2
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
DEUTSCH
РУССКИЙ
A Typical Connections / Typische Anschlüsse / Типичные подключения
Before connecting: Check the wiring in the vehicle
Vor dem Anschließen: Die Verdrahtung im Fahrzeug sorgfältig
Перед началом подключений: Тщательно проверьте
carefully. Incorrect connection may cause serious damage to überprüfen. Falsche Anschlüsse können ernsthafte Schäden am Gerät проводку в автомобиле. Неправильное подключение
this receiver.
hervorrufen.
может привести к серьезному повреждению устройства.
Жилы силового кабеля и жилы соединителя от кузова
автомобиля могут быть разного цвета.
The leads of the power cord and those of the connector from
the car body may be different in color.
Die Leiter des Stromkabels und die Leiter des Anschlusses im
Fahrzeug können sich farblich unterscheiden.
1 Connect the colored leads of the power cord in the order
1 Die farbigen Adern des Stromkabels in der Reihenfolge
1 Подсоедините цветные провода шнура питания в
specified in the illustration below.
anschließen, wie in der Abbildung unten gezeigt.
указанном ниже порядке.
2 Connect the aerial cord.
2 Das Antennenkabel anschließen.
2 Подключите кабель антенны.
3 Finally connect the wiring harness to the receiver.
3 Die Kabelbäume am Gerät anschließen.
3 В последнюю очередь подключите электропроводку к
Note: If your vehicle does not have any accessory terminal,
Hinweis: Verfügt Ihr Fahrzeug nicht über eine
устройству.
move the fuse from the fuse position 1 (initial position) to fuse Zubehöranschlußklemme, die Sicherung von der 1.
Примечание: Если в Вашем автомобиле никакого
вспомогательного разъема не имеется, переставьте
предохранитель из положения 1 предохранителя
(первоначальное положение) в положение 2
предохранителя и подключите красный провод (А7) к
положительному (+) полюсу аккумулятора.
• Желтый провод (А4) в этом случае не используется.
position 2, and connect the red lead (A7) to the positive (+)
battery terminal.
• The yellow lead (A4) is not used in this case.
Sicherungsposition (Erstposition) in die 2. Sicherungsposition
versetzen, die rote Leitung (A7) an der (+) Batterieanschlußklemme
anschließen.
• Die gelbe Leitung (A4) wird in diesem Fall nicht verwendet.
To steering wheel remote controller (see diagram
An Lenkradfernbedienung (siehe Schaltplan
)
)
К рулевому пульту дистанционного управления (см. схему
)
Fuse position 2 / 2. Sicherungsposition / Положение 2
предохранителя
Rear ground terminal
Hintere Erdungscan-
schlußklemme
Задний разъем
заземления
Fuse position 1 / 1. Sicherungsposition / Положение 1
предохранителя
15 A fuse
15 A Sicherung
Предохранитель 15 A
Aerial terminal
Antennenanschlu-
ßklemme
*1 Not included for this receiver
Ignition switch
Zündschalter
Переключатель зажигания
Разъем антенны
1
*
Wird nicht mit Gerät mitgeliefert
*1 Не входит в комплект
Black
Schwarz
Черный
To metallic body or chassis of the car
Zur metallenen Karosserie oder zum Fahrwerk des Autos
К металлическому корпусу или шасси автомобиля
Yellow*2
Gelb*2
Желтый*2
To a live terminal in the fuse block connecting to the car battery
(bypassing the ignition switch) (constant 12 V)
Zur einer stromführenden Anschlußklemme im Sicherungsblock
zum Anschließen an die Autobatterie (Umgehen des Zündschalters)
(konstant 12 V)
Line out (see diagram
Schutz kappen Signalausgang (siehe Schaltplan
К выходу (см. схему
)
)
)
К разъему фазы в блоке предохранителя (минуя блок
зажигания) (постоянный 12 В)
Fuse block
Sicherungsblock
Блок предохранителя
Red
Rot
Красный
To an accessory terminal in the fuse block
Zur einer Zubehöranschlußklemme im Sicherungsblock
К вспомогательному разъему в блоке предохранителя
2
2
*
Before checking the operation of this receiver prior to
installation, this lead must be connected, otherwise
power cannot be turned on.
Vor der Überprüfung der Funktionsfähigkeit
des Geräts vor dem Einbau, muß diese Leitung
angeschlossen werden, da sonst die Stromversorgung
nicht eingeschaltet werden kann.
Перед проверкой работы устройства подключите
*
Blue with white stripe
Blau mit weißem Streifen
Синий с белой полосой
To the remote lead of other equipment or power aerial if any (200 mA max.)
Zum Zusatzkabel des anderen Geräts oder der Motorantenne, sofern vorhanden
(max. 200 mA)
2
*
этот провод, иначе питание не включится.
К удаленному проводу другого оборудования или антенны (макс. 200 мА)
Brown
Braun
Коричневый
To cellular phone system
Zur Mobiltelefon
К системе сотового телефона
White with black stripe
Weiß mit schwarzem
Streifen
White
Weiß
Белый
Gray with black stripe
Grau mit schwarzem
Streifen
Gray
Grau
Серый
Green with black stripe
Grün mit schwarzem
Streifen
Green
Grün
Зеленый
Purple with black stripe
Lila mit schwarzem
Streifen
Purple
Lila
Пурпурный
Белый с черной
полосой
Серый с черной
полосой
Зеленый с черной
полосой
Пурпурный с черной
полосой
Left speaker (front)
Linker Lautsprecher (vorne)
Левый громкоговоритель
(передний)
Right speaker (front)
Rechter Lautsprecher (vorne)
Правый громкоговоритель
(передний)
Left speaker (rear)
Linker Lautsprecher (hinten)
Левый громкоговоритель
(задний)
Right speaker (rear)
Rechter Lautsprecher (hinten)
Правый громкоговоритель
(задний)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
B
Connecting the external amplifier / Anschließen des externen Verstärkers / Подключение внешнего усилителя
You can connect an amplifier to upgrade your car stereo
system.
Sie können einen Verstärker anschließen, um Ihre Autostereoanlage
zu erweitern.
Можно подключить усилитель для обновления
автомобильной стереосистемы.
• Connect the remote lead (blue with white stripe) to the
remote lead of the other equipment so that it can be
controlled through this receiver.
• Disconnect the speakers from this receiver, connect
them to the amplifier. Leave the speaker leads of this
receiver unused.
• Schließen Sie das Fernbedienungskabel (blau mit weißem Streifen) • Подсоедините провод внешнего устройства (синий с
an das Fernbedienungskabel des anderen Geräts an, so daß es über
dieses Gerät gesteuert werden kann.
• Die Lautsprecher von diesem Gerät abtrennen und am
Verstärker anschließen. Die Lautsprecherleitungen
dieses Geräts unbenutzt lassen.
белой полосой) к проводу внешнего устройства другого
оборудования так, чтобы им можно было управлять с
этого устройства.
• Отсоедините громкоговорители от данного
устройства, подключите их к усилителю. Оставьте
провода громкоговорителей данного устройства
неиспользованными.
Rear speakers
Hintere Lautsprecher
Задние громкоговорители
Remote lead
Fernbedienungsleitung
Провод внешнего устройства
Y-connector (not supplied with this receiver)
Y-Anschluß (nicht mit diesem Gerät mitgeliefert)
Разъем Y (не входит в комплект)
JVC Amplifier
JVC Verstärker
JVC-усилитель
Remote lead (Blue with white stripe)
Fernbedienungsleitung (Blau mit weißem Streifen)
Провод внешнего устройства (Синий с белой полосой)
Signal cord (not supplied with this receiver)
Einzelleitung (nicht mit diesem Gerät mitgeliefert)
Кабель сигнала (не входит в комплект)
To the remote lead of other equipment or power aerial if any
Zum Zusatzkabel des anderen Geräts oder der Motorantenne, sofern
vorhanden
К удаленному проводу другого оборудования или антенны
Front speakers
Vordere Lautsprecher
Передние громкоговорители
3
*3 Firmly attach the ground wire to the metallic body or to
the chassis of the car—to the place not coated with paint
(if coated with paint, remove the paint before attaching
the wire). Failure to do so may cause damage to the
receiver.
*
Verbinden Sie den Erdungsleiter mit der Karosserie oder dem
Rahmen des Fahrzeugs. Die Kontaktstelle darf nicht lackiert sein
(sollte die Kontaktstelle lackiert sein, entfernen Sie den Lack
der Kontaktstelle, bevor Sie den Leiter befestigen). Wenn der
Erdungsleiter nicht ordnungsgemäß angeschlossen wird, kann
dieses Gerät beschädigt werden.
*3 Плотно прикрепите заземляющий провод к
металлическому кузову или шасси автомобиля—в
месте, не покрытом краской (если оно покрыто
краской, удалите краску перед тем, как прикреплять
провод). Невыполнение этого требования может
привести к повреждению данного устройства.
C
Connecting to the steering wheel remote controller / Anschluß an die Lenkradfernbedienung / Подключение к рулевому пульту
дистанционного управления
If your car is equipped with the steering wheel remote controller, you can operate this receiver
using the controller. To do it, a JVC’s OE remote adapter (not supplied) which matches with your
car is required. Consult your JVC IN-CAR ENTERTAINMENT dealer for details.
Wenn Ihr Fahrzeug mit einer Lenkradferndienung ausgestattet ist, können Sie damit diesen Receiver
steuern. Hierfür ist ein für Ihr Fahrzeug passender Radio-Lenkrad-Fernbedienungsadaption von JVC
(nicht im Lieferumfang enthalten) erforderlich. Für weitere Einzelheiten wenden Sie sich an Ihren JVC
Autoradiohändler.
OE remote adapter (not supplied)
Radio-Lenkrad-Fernbedienungsadaption
(nicht im Lieferumfang enthalten)
Aдаптер рулевого пульта дистанционного
управления OE (не поставляется)
Steering wheel remote input
Eingang für Lenkradfernbedienung
Вход рулевого пульта дистанционного
управления
Если автомобиль оборудован рулевым пультом дистанционного управления, его можно
использовать для управления данным устройством. Для этого необходим адаптер
рулевого пульта дистанционного управления JVC OE (не поставляется), подходящий
для Вашего автомобиля. За более подробной информацией обратитесь к поставщику
автомобильных аудиосистем компании JVC.
Steering wheel remote controller (equipped in the car)
Lenkradfernbedienung (im Fahrzeug installiert)
Рулевой пульт дистанционного управления
(устанавливаемый в автомобиле)
ПРЕДОСТЕРЕЖЕНИЯ по питанию и
подключению громкоговорителей:
• НЕ подключайте провода громкоговорителей к
аккумулятору автомобиля, иначе устройство будет
повреждено.
PRECAUTIONS on power supply and speaker
connections:
• DO NOT connect the speaker leads of the power cord
to the car battery; otherwise, the receiver will be
seriously damaged.
VORSICHTSMASSREGELN beim Anschließen der
Stromversorgung und Lautsprecher:
• Die Lautsprecherleitungen des Netzkabels NICHT an der
Autobatterie anschließen, da sonst das Gerät schwer
beschädigt wird.
• ПЕРЕД подключением проводов громкоговорителей
к кабелю питания громкоговорителя проверьте схему
соединений громкоговорителей в Вашем автомобиле.
• BEFORE connecting the speaker leads of the power cord to • VOR dem Anschließen der Lautsprecherleitungen des
the speakers, check the speaker wiring in your car.
Spannunsgversorgungskabels an die Lautsprecher, die
Lautsprecherverdrahtung in Ihrem Auto überprüfen.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|