IN VACA RE®
INVACARE®
Invacare® InTouch™ Stabilite™ Cushion
Invacare® InTouch™ Propel™ Back
Seating
& Positioning
HCPCS Code = E2607, E2608 (Gentle Contour) E2605 (Max Contour)
HCPCS Code = E2611
Seating
& Positioning
The Invacare® InTouch™ Stabilite™ Seat Cushion was
developed to provide pelvic stability and leg positioning for
patients with postural asymmetry. The Stabilite Cushion
comes fitted with a ThinAir™ liner, a unique comfort layer
that assists in redistributing peak pressures away from
bony prominences as well as with the management of
shear forces that occur with activities of daily living.
The Invacare® InTouch™ Propel™ Back is a general purpose
back support so lightweight and comfortable, consumers will
forget it’s there. Hardware installation is no longer a hassle:
just grab it, set it and go. The rigid shell coupled with a soft,
contoured foam cushion provides gentle support and
facilitates postural symmetry. The Propel Back provides a
stable surface for propulsion and completion of activities
of daily living and daily mobility. Consumers will leave
ordinary back upholstery in the past when they try the
InTouch Propel Back.
Invacare® InTouch™ Flovair™ Cushion
HCPCS Code = E2607, E2608 (Gentle/Max Contour)
Invacare® InTouch™ PCS Back
The Invacare® InTouch™ Flovair™ Seat Cushion was
developed to provide pelvic stability, leg positioning and
pressure management for patients with postural asymmetry
and skin integrity concerns. It incorporates a fluid overlay
used in tandem with the ThinAir™ liner to maximize surface
area for optimal pressure redistribution. Additionally, the
layers work to reduce build up of shear forces against the
user while minimizing overall product weight. The InTouch
Flovair cushion is a great choice where positioning needs and
pressure management requirements are both key goals.
HCPCS code = E2620/ E2621
The Invacare® InTouch™ PCS Back was developed to be a
lightweight positioning back with applications for both
manual and power chair users, for upright seating systems
and for tilt and/or recline systems. The back was designed
with features including scapular cutouts, three inches of
lateral contour depth, soft foam, sacral support, height/angle/
depth adjustability and optional thoracic lateral supports
and pelvic stabilizers that synergize to provide the exceptional
Positioning, Comfort and Stability required by wheelchair
users everyday.
Invacare® InTouch™ Stabilite™ OM Cushion
HCPCS Code = E2605, E2606
The Invacare® InTouch™ Stabilite™ OM Seat Cushion was
developed to address positioning needs for a level pelvis or a
mild to moderate pelvic obliquity. It is a uniquely simple design
for using inserts under the sacral region of the cushion to
manage mild to moderate obliquities, now or in the future.
© 2010 Invacare Corporation.
All rights reserved. Trademarks are identified by the symbols ™ and ®.
All trademarks are owned by or licensed to Invacare Corporation unless otherwise noted.
FloGel® is a registered trademark of S.N.F.
Specifications are subject to change without notification.
Download from Www.Somanuals.com. All Manuals Search And Download.
Page Reference Guide
®
Invacare Seat Cushions
Product
HCPCS Code
Page
™
Absolute
E2601
1-2
1-2
Single Density
E2601/E2602
Comfort-Mate Extra
E2603/E2604
E2603/E2604
E2603/E2604
1-2
3-4
3-4
®
Infinity LoContour ViscoFoam
®
®
Infinity LoContour FloGel
™
™
InTouch Stabilite Max Contour
E2605
5-8
5-8
™
™
InTouch Stabilite OM
E2605/E2606
™
™
InTouch Flovair Gentle/Max Contour
E2607/E2608
E2607/E2608
E2607/E2608
E2607/E2608
5-8
5-8
3-4
3-4
™
™
InTouch Stabilite Gentle Contour
®
Infinity Gentle/Max ViscoFoam
®
®
Infinity Gentle/Max FloGel
®
™
Infinity LoContour AirFlo
K0734/K0735
K0736/K0737
3-4
3-4
®
™
Infinity Gentle/Max Contour AirFlo
®
Invacare Backs
Product
HCPCS Code
Page
™
™
InTouch Propel
E2611
11-12
™
Personal Back 10
E2615/E2616
E2615/E2616
11-12
11-12
™
Personal Back 10 Plus
™
InTouch PCS
E2620/E2621
9-10
Accessories
13-14
15
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
®
™
Invacare Absolute and Single Density Cushions: Simple seating solutions for comfort, fit and function.
®
™
For individuals with mild to moderate seating needs, the Invacare Absolute and Single Density cushions offer simple, but
highly functional solutions. These cushions are designed to provide basic comfort using highly resilient foam.
HCPCS Code = E2601
™
Absolute Cushion
Model no. EC
Features and Functional Benefits
• Lightweight Molded Polyurethane foam: Provides comfort and durability
• Gentle Contour: For comfort and centering in the seat
• Shaped cushion bottom: Allows use of cushion on taut sling upholstery
• Outer cover: Breathable water repellant cover to protect foam and keep the consumer dry
• Non-slip bottom: Keeps cushion secure and in place
HCPCS Code = E2601/E2602
Single Density Cushion
Model no. SD
Features and Functional Benefits
• Lightweight Contoured foam with deformation cut: Provides comfort and
stability to the individual
• Outer cover: Durable water repellant cover to protect foam and keep the
consumer dry
®
Invacare Comfort-Mate Extra
®
The Invacare Comfort-Mate Extra cushion goes one step further with a comfortable, molded design and a durable moisture-resistant coating.
CPCS Code = E2603/E2604
Comfort-Mate Extra Cushion
Model no. CMEX
Features and Functional Benefits
• Low profile, lightweight cushion: Designed for long-term sitting comfort and
easy lateral transfers
• Molded dual-firmness polyurethane foam: Soft top layer provides exceptional
comfort and firmer bottom layer stabilizes and supports the pelvis
• Contoured seating surface: Promotes neutral leg positioning while providing
gentle positioning
• Beveled sides: Allows use with a drop seat
• Moisture resistant coating: Seals and protects foam from moisture;
easily wipes clean
• Outer Cover: Breathable water repellant cover to keep the user cool and dry
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Application
Specifications
• Intended for individuals:
Width: 16"–20"
- with mild to moderate seating needs
- who are able to do own weight shift for pressure relief
• Comfort and durability
Depth: 16"–18"
A. Height at adductor 3.25"
B. Height at abductor 2.25"
C
• Good rental wheelchair cushion
C. Height at rear
2"
B
Cushion weight approximately 2 lb.
A
Application
Specifications
Width: 10"–24"
Depth: 7"–20"
B
• Designed for individuals from pediatrics to geriatrics:
- with mild to moderate seating needs
- who are able to do own weight shift for pressure relief
• Comfort
A
A. Height at rear
B. Height at rear (center) 1.5"
C. Height at front 2.5"
2"
• Good rental wheelchair cushion
C
Cushion weight approximately 2 lb.
Application
Specifications
• Ideal for individuals:
Width: 14"–22"
- with long-term care needs
Depth: 14"–20"
- who are able to do own weight shifts for pressure relief
- who need some skin protection
A. Height at adductor 2.625"
B. Height at abductor 3.0"
- who need comfort, stability and gentle positioning
C. Height at rear
1.75"
• Good long-term care facility wheelchair cushion
D. Height at leg trough 2.25"
®
• A great fit for the Infinity Drop Base to get the desired
Cushion weight approximately 2.3 lb.
seat-to-floor height
2
Download from Www.Somanuals.com. All Manuals Search And Download.
®
®
Invacare Infinity Cushions
®
®
The Invacare Infinity line of cushions is designed to provide
optimal rehab solutions for comfort, stability and pressure
redistribution, as well as address positioning needs. Additionally,
these versatile modular seating solutions can be modified to meet
current user needs or accommodate future changes. The Infinity
cushions are constructed with three support layers - the base
layer and the integrated middle pelvic support layer with an ischial
®
™
insert. In the Invacare AirFlo cushion, the integrated pelvic
support and ischial layers are replaced with 2" air flotation cells.
The Infinity cushions are available in three different contours - Lo,
Gentle and Max.
Features and Functional Benefits
• Lightweight Polyurethane foam base: Provides adequate postural support
• Contoured top foam: Provides comfort and enhances pelvic stability
• Integrated Middle Support Layer: Adjusts to correct or accommodate
pelvic obliquity
• Integrated Ischial Insert: Conforms to sensitive bony prominences and
allows optimal immersion for comfort, stability and pressure relief
• AirFlo Cells: Provide optimal immersion and suspension of bony prominences
for pressure redistribution
• Inner cover: Recovery material that is moisture proof and water resistant
with 4-way stretch to allow immersion
• Outer cover: 4-way stretch, water resistant, breathable cover to
dissipate heat and moisture
• Optional Removal leg wedges: Allows lower seat-to-floor height for
foot propellers or accommodates limited hip flexion (opens up seat
to back angle)
• Optional Leg Length Cutouts: 1; or 2" cutouts to accommodate
leg length discrepancies
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LoContour
HCPCS Code = E2607/E2608 (Gentle/Max Contour)
E2603/E2604 (LoContour)
LoContour is an excellent choice for individuals who:
• Have good postural control
• Need to accomodate postural asymmetry,
for example, windswept hips
• Need low profile for lateral transfer
• Foot propel
ViscoFoam Cushion
Model no. ILCVF, IGCVF, IMCVF
Integrated ischial insert is very soft visco foam
Application
• ViscoFoam cushion is an excellent choice for individuals who:
• Are at high risk of skin breakdown
• Require excellent support and stability
• Require a lightweight cushion
Specifications
Width: 13"–22"
Depth: 15"–20"
A. Height at adductor
B. Height at abductor
C
B
2.75"
2.25"
A
C. Height at leg trough 2.25"
Gentle Contour
HCPCS Code = E2607/E2608 (Gentle/Max Contour)
E2603/E2604 (LoContour)
Gentle Contour is an excellent choice for individuals who:
• Have moderate postural instability
• Require gentle control of posture
• Need moderate control of
abduction/adduction tendency
®
FloGel by S.N.F. Cushion
Model no. ILCFG, IGCFG, IMCFG
Integrated ischial insert includes layer of gel over very soft visco foam
Application
®
Specifications
• FloGel cushion is an excellent choice for individuals who:
• Are at high risk of skin breakdown
• Require excellent support and stability
• Require a good dynamic shear reduction
Width: 13"–22"
Depth: 15"–20"
A. Height at adductor
B. Height at abductor
C
B
3.38"
3.38"
A
C. Height at leg trough 2.25"
Max Contour
HCPCS Code = K0736/K0737 (Gentle/Max Contour)
K0734/K0735 (LoContour)
Max Contour is an excellent choice for individuals who:
• Require high level of postural control
• Require optimal pressure reduction
and redistribution
™
AirFlo Cushion
Model no. ILCAIR, IGCAIR, IMCAIR
Single hand operated air inflation bulb allows easy adjustment
Application
Specifications
™
• AirFlo cushion is an excellent choice for individuals who:
Width: 13"–22"
Depth: 15"–20"
A. Height at adductor
B. Height at abductor
C
• Have a history of or are considered to be at very
high risk of skin breakdown
B
4.25"
4.40"
A
• Require an air flotation insert for immersion of bony prominences
• Require a postural support base for stability
C. Height at leg trough 2.66"
4
Download from Www.Somanuals.com. All Manuals Search And Download.
™
™
InTouch Flovair Cushion
™
™
InTouch Stabilite Cushion
™
™
InTouch Stabilite OM Cushion
5
Download from Www.Somanuals.com. All Manuals Search And Download.
®
™
Invacare InTouch Cushions
®
™
™
™
™
The Invacare InTouch Seat Cushions begin with the base for comfort, stability and function. The Stabilite , Flovair and Stabilite
OM cushions are three distinct cushions with one clear message- if the base isn’t right, nothing else matters.
With the exceptional InTouch Stabilite and Flovair cushions from Invacare, less is more. These hybrid cushions combine contouring
in the base with the latest advancements in pressure redistribution technology to create a seating experience like no other. These
cushions capture the stability of foam, the pressure redistribution of air and the shear reduction of fluid. This is all accomplished with
less volume than has traditionally been used in wheelchair cushions, thus reducing weight and maximizing comfort.
Additionally, the Stabilite OM cushion is intended to provide outstanding positioning and comfort with optimal stability for function.
Unique to the design are obliquity inserts under the base that can be utilized to correct or accommodate mild to moderate pelvic
obliquities now or in the future.
Positioning Support Base
The larger the surface area, the lower the pressure. Our engineers put purpose behind the contouring of the InTouch base. Leg troughs are slightly abducted.
Soft foam envelops the IT’s, coccyx and sacrum. Firmer foam supports the trochanters and provides additional pelvic support for stability. Smooth, refined
transitions are sculpted to replace steep ridges or uncomfortably placed abductors. The base is designed to maximize functionality and comfort when seated
in a wheelchair.
Features and Functional Benefits
• Soft foam: Allows immersion of the pelvis and increases contact over maximum surface area for maximum
comfort, stability and optimal pressure redistribution without bottoming out. By maximizing surface area,
pelvic excursion is limited
• Medial Thigh Support: Gentle control of adduction tendencies
• Lateral Thigh Supports: Gentle control of abduction tendencies and positioning guidance to maintain
proper alignment of lower extremities
Maximize surface area
• Slightly Abducted Leg Troughs: Facilitates a neutral to anterior tilt of the pelvis, promoting a stable
upright posture
• Trochanter Cutouts: Provides pressure distribution anterior and posterior to the trochanters, further
promoting a stable pelvis in the seated position
• Trochanter Support: Firmer foam on either side of the base under the trochanters provides additional
pelvic support for stability
• Lateral Pelvic Support: Maintains pelvis in a centered position on the seat and provides lateral pelvic
stability and pelvic support
• Posterior Pelvic Support: Provides pelvic control required for stability and function
• Sacral Relief: Provides additional comfort and support for those sitting in a posterior pelvic tilt
• Low Profile: Lowers seat-to-floor height for foot propellers and allows easier lateral transfers without
compromising positioning/comfort/stability
Removable Leg Wedges
• Optional Removable Leg Wedges: Lowers front seat-to-floor height for foot propellers and
accommodates limited hip flexion by opening up seat to back angle
• Optional Leg Length Cutouts: One or two-inch cutouts accommodate leg length discrepancies
6
Download from Www.Somanuals.com. All Manuals Search And Download.
®
™
™
Invacare InTouch Stabilite Cushion
®
™
™
The Invacare InTouch Stabilite seat cushion was developed to
provide pelvic stability and leg positioning for patients with postural
asymmetry. The Stabilite cushion comes fitted with a patent-
™
pending ThinAir liner, a unique comfort layer that assists in
reducing shear as well as in redistributing peak pressures away
from bony prominences. The Stabilite cushion is a great choice
for geriatric or CVA clients.
®
™
™
Invacare InTouch Flovair Cushion
®
™
™
The Invacare InTouch Flovair seat cushion was developed to
provide pelvic stability, leg positioning and pressure management
for patients with postural asymmetry and skin integrity
concerns. It incorporates a fluid overlay used in tandem with the
™
patent-pending ThinAir liner to maximize surface area for optimal
pressure redistribution and reduce build up of shear forces
against the user, while minimizing overall product weight. The
Flovair cushion is a great choice for neuromuscular, TBI or SCI
clients without significant obliquity.
®
™
™
Invacare InTouch Stabilite OM Cushion
A uniquely simple design for using inserts under the sacral region of the
cushion to manage mild to moderate obliquities, now or in the future.
Obliquity
Management
Simple design addresses
positioning needs for a
level pelvis or a mild to
moderate obliquity
Level
• Accommodate obliquities
by lowering the cushion
on the low side of the
oblique pelvis
Bottom View
One half-inch adjustment
• Correct obliquities by
raising the cushion on
the low side of the
oblique pelvis
• Keep both inserts in
place to address a
level pelvis
One-inch adjustment
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HCPCS Code = E2607/E2608 (Gentle Contour), E2605 (Max Contour)
™
Stabilite Cushion
Model no. ITSG, ITSM
Features and Functional Benefits
• Positioning foam base: Supports the pelvis and thighs; helps to prevent adduction
and internal rotation
TM
• ThinAir liner: Helps reduce shear forces that occur during daily activites in a
seated position
™
™
™
InTouch Flovair /Stabilite Gentle Contour
• Gentle/Max contour: Contour choices based on involvement level
Specifications
Gentle
Contour
Max
Contour
Width:
15"–24"
15"–22"
3.5"
15"–20"
15"–20"
4.38"
HCPCS Code = E2607/E2608 (Gentle/Max Contour)
Depth:
A. Height at adductor
B. Height at abductor
™
Flovair Cushion
3.5"
4.38"
Model no. ITFG, ITFM
C. Height at leg trough 2.87"
2.88"
Features and Functional Benefits
• Positioning foam base: Supports the pelvis and thighs; helps to prevent adduction
and internal rotation
TM
• Fluid + ThinAir liner: Effectively redistributes pressure without weight penalty.
Shear reduction as two layers work in harmony
• Gentle/Max contour: Contour choices based on involvement level
™
™
™
InTouch Flovair /Stabilite Max Contour
HCPCS Code = E2605/E2606
™
Stabilite OM Cushion
Model no. ITSOM
Specifications
Features and Functional Benefits
• Positioning foam base: Supports the pelvis and thighs; helps to prevent adduction
and internal rotation
Width
Depth
14"– 24"
14"– 22"
• Low Profile: Easier transfers without compromising stability/positioning/comfort
Weight capacity
14"– 20" w = 300 lb.
21"– 24" w = 500 lb.
• Obliquity Inserts (Standard): Allow accommodation or correction of mild to moderate
obliquities
A. = 3.75
B. = 3.75
C. = 2.62
8
Download from Www.Somanuals.com. All Manuals Search And Download.
®
™
Invacare InTouch PCS Positioning Back
™
®
Introducing the Invacare InTouch PCS positioning back with
applications for both manual and power chair users, for upright
seating systems and for tilt and/or recline systems. The back was
designed with features that synergize to provide the exceptional
Positioning, Comfort and Stability required by wheelchair
users everyday.
Scapular cutout
Spacer fabric
POSITIONING
• Lightweight aluminum back with 3" of
lateral contour depth
• Scapular cutouts
• Tapered contours at the sacral portion
• New easy to adjust hardware
COMFORT
• Soft foam over the back shell
• New spacer fabric upholstery
• Unique sizes in 1" width increments
STABILITY
• Optional thoracic lateral supports and pelvic
Sacral support
stabilizers for wheelchair users with
3" contour depth
positioning needs that require additional
lateral or pelvic control
Sacral contours
• Unique back mounting hardware
Specifications
Available widths: 14"–24"
Height: 16" (Regular); 20" (Tall)
Depth adjustment: 1.5" to the back
Angle adjust: up to 30°
Product weight: 4.7 lb.
Pre-drilled headrest holes
Aluminum Shell
Back Shell
Features and Functional Benefits
• Aluminum shell: Lightweight to reduce overall weight of
the frame and minimize manual mobility, thereby improving
efficiency with propulsion
• Pre-drilled headrest holes: Headrest can be mounted directly
on the back and easily accommodates standard headrest
mounting hardware
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HCPCS Code = E2620/E2621
™
InTouch PCS Positioning Back
Model no. ITPCSR, ITPCST
Features and Functional Benefits
Quick Release Latch:
Allows one hand operation for
removal and remount of the back
during transport
• Regular and tall heights: Accommodates the different postural requirements and need for taller back
supports when used with tilt and/or recline
• 1" soft foam: Provides optimal comfort with pressure redistribution
• Spacer fabric: Allows for improved airflow between the user and
back for optimal management of heat and moisture to promote better
skin integrity
Spacer fabric:
Regulation of heat and moisture
• Scapular cutouts: Facilitates upright positioning with trunk
extension without interfering with upper extremity function.
By not limiting upper extremity range of motion, overall
functionality is maximized
• 3" lateral contour depth: Provides lateral trunk support to facilitate centering and postural control with
proximal stability required for function
Quick Release Latch
• Sacral support: Facilitates proximal stability required for function. Provides pelvic control/support for an
upright posture with trunk extension
• Sacral contours: Tapered contours at the sacral portion of the back allow full contact of the back shell against
the user without interfering with hip placement in the seating system
• One tool assembly: Only one tool needed for all installations, adjustments and accessories
• Single-point mounting hardware: Works with dual-point strength to create stability and securely
mounts between canes without any unwanted play, while allowing height, depth and back angle
adjustment. Designed to mount onto back canes with an outside diameter of 1" or 7/8"
Lock
• Angle adjustable hardware: Allows accommodation of hip range of motion limitations, kyphotic postures
and posterior pelvic tilt by opening up seat to back angle
• Depth adjustable hardware: Allows positioning without losing seat depth, thereby maximizing the area of
seating surface for optimal pressure redistribution
• Height adjustable hardware: Accommodates user’s positioning requirements in the wheelchair
Optional Thoracic Lateral Supports: Optional
Height
and width
supports (4" tall) provide improved trunk control
adjustment
for optional
thoracic
and stability
Unlock
Optional Pelvic Stabilizers: Optional supports
(3" tall) promote pelvic stability
lateral
supports
and pelvic
stabilizers
These optional supports provide additional positioning for
the trunk and pelvis to increase support for maximizing
upright (spinal extension) and midline (centered) trunk
positioning. The thoracic lateral supports and pelvic
stabilizers are adjustable in height and width for accom-
modating fixed posture asymmetries, correcting flexible
postural deformities or adjusting over time to support
postural changes incrementally in steps. Additionally,
these supports act as clinician’s hands to keep the
patient in the best position identified.
Thoracic
lateral
supports
Pelvic
stabilizers
10
Download from Www.Somanuals.com. All Manuals Search And Download.
®
™
™
Invacare InTouch Propel Back
®
™
™
Invacare InTouch Propel Back is a general purpose back support so lightweight and comfortable consumers will forget it’s there.
Hardware installation is no longer a hassle: just grab it, set it and go. The rigid shell coupled with a soft contoured foam cushion
provides gentle support and facilitates postural symmetry. The Propel Back provides a stable surface for propulsion and completion
of daily living activities. Consumers will leave ordinary back upholstery in the past when they try the InTouch Propel Back.
CPCS Code = E2611
™
™
Touch Propel Back
del no. ITPR
atures and Functional Benefits
olid, lightweight back: Intended to provide support for an upright posture and
proved sitting tolerance with less fatigue
oft Foam: Provides optimal comfort
capular Cutouts: Improved upper extremity function and efficient wheelchair propulsion
edundant Tissue Cutouts: Increased lower back comfort
way adjustability: Adjustable in height/width/depth/angle to accommodate user’s
sitioning requirements. Adjustments can be made while user is seated in the chair
™
Invack 10 Plus Backs
®
™
™
The Invacare Personal Back 10 and Personal Back 10 Plus Backs combine simplicity of design with effectiveness of application. The
highly popular Personal Back line continues to provide the comfort, postural support and spinal alignment that you have come to expect.
HCPCS Code = E2615/E2616
™
™
™
Personal Back 10
Personal Back 10 and Personal Back 10 Plus Backs
Model no. PBR, PBT
Model no. PPR, PPT
eatures and Functional Benefits
Regular and Tall Heights: Accommodate different user postural requirements
Aluminum Shell: Lightweight and mounts quickly and easily to the wheelchair
Pre-contoured shell: Provides excellent contact, improved lateral stability and support
Deep Lateral Contour: Provides increased midline support without interfering with
upper extremity range of motion
Pre-drilled headrest pattern: Allows mounting of standard headrest mounting hardware
™
Quick Set hardware: Allows increased adjustability in height, depth and back angle
Tall
Regular
tional Foam-in-Place kit: Provides additional support and positioning for consumers
™
Personal Back 10 Plus
o needs a more custom fit. See Accessories for additional information
Tall
Regular
11
Download from Www.Somanuals.com. All Manuals Search And Download.
One-handed quick release
Adjust depth/angle while client
is seated
Specifications
• One handed quick release: Allows easy removal and
remounting for transport
Width: 16"– 21" (in 1" increments)
Height: 16.5"
• One tool assembly (7/8" wrench): Only one tool
needed for all installations and adjustments
• Hardware: Two point mountings fit 7/8" to 1" canes
Depth adjust: 1.75"
Angle adjust: up to 27°
Product Weight: 4 lb.
Fits 7/8" or 1" canes with no
additional hardware
™
Personal Back 10
B
A
C
™
Personal Back 10 Plus
™
Application: Personal Back 10 Back
Specifications
™
• The Personal Back10 Back is an excellent choice for
individuals who:
• Require comfort and stability with moderate
lateral support
Personal Back 10 Back Heights
Width
Regular
14"
Tall
16"
19"
13" – 14"
15" – 26"
16"
• Require modifications in seat to back angle for
postural accomodation
B
A
C
™
Application: Personal Back 10 Plus Back
• The Personal Back10 Plus Back is an excellent choice for
individuals who:
• Require comfort and stability with increased
lateral support
™
Personal Back 10
Width
13"
12.13 13.13 14.13 15.13 16.13 17.13 18.13 19.13 21.13 23.13 25.13
9.50 10.50 11.50 12.50 13.50 14.50 15.50 16.50 18.43 20.43 22.43
5.14
14"
15"
16"
17"
18"
19"
20"
22"
24"
26"
A (Outer Width)
B (Inner Width)
• Recommended when using the foam-in-place kit
C (Contour Width)
5.28
5.41
5.54
5.68
5.81
5.94
6.08
6.60
6.86
7.13
• Require modifications in seat to back angle for
postural accomodation
™
Personal Back 10 Plus
Width
13"
14"
15"
16"
17"
18"
19"
20"
22"
24"
26"
A (Outer Width)
B (Inner Width)
C (Contour Width)
13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 22.00 24.00 26.00
9.50
6.85
10.50 11.50 12.50 13.50 14.50 15.50 16.50 18.43 20.43 22.43
6.99 7.12 7.25 7.39 7.52 7.65 7.79 8.27 8.54 8.81
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ushion Rigidizer
Lightweight plastic seat insert
Securely attaches to bottom of cushion inside cover
Fits between seat rails for level support
Eliminates hammock effect of seat upholstery
Two Step Adjustable
Headrest System
Adjustable Headrests
• Contoured head and neck supports available in four styles
• Dual-ball swivel hardware for multi-plane adjustment
• Durable steel reinforced polyurethane pads - easily wipe clea
Curved Adjustable
Headrest System
Large Adjustable
Headrest System
Small Adjustable
Headrest System
®
Infinity Drop Base
• Provides stable support base for the cushion
• Lowers seat-to-floor height which aids in foot propulsion, opens up seat to back angle,
allows easy lateral transfers and improves basic functionality when in a seated position
• Width adjustable: Three sizes fit wheelchairs from 14" to 22" wide
• Height and angle adjustable: up to 2" of drop provided
• Portable quick-release hardware allows easy removal of base from wheelchair
Basic Headrest
• Padded to provide comfortable occipital support
• Horizontal and vertical adjustable hardware
• Outer cover easily removes for laundering
Foam-In-Place Kit
• Easy-to-use Foam-in-Place kit provides custom foam mold insert in minutes
• Provides additional support and positioning for users who need a more custom fit
• Custom-molded insert can be easily removed for modification or remolded to meet
the changing needs of the user
™
™
• Can be used with Personal Back 10/ Personal Back 10 Plus
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ay - Hook and Loop Mount
eight and easy to handle
esistant clear polycarbonate tray surface
ttaches to chair armrest with hook and loop straps
able trim allows thorough cleaning
Belts and Straps
• Three sizes of shoulder supports fit child, junior and adult
• Three sizes of padded lap belts fit child, junior and adult;
pinch release buckles
• Push-button style release provides secure attachment
• Three sizes of four-point lap belt to fit child, junior and adult;
push button release buckle
ull Tray - Slide-on Mount
Break-resistant clear polyester resin tray surface
Width adjustable mounting hardware securely
fastens tray to chair arm pads
Molded-in rim helps keep items on tray
Half Tray - Swingaway
• Break-resistant clear polycarbonate tray surface
• Tray securely bolts to wheelchair armrest and is durable
• Tray easily swings away when not in use
• Molded-in rim helps keep items on tray
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
™
™
™
™
™
InTouch Stabilite /Flovair Cushions
(pages 5 -8)
InTouch Stabilite OM (pages 5-8)
Seat width
14" – 24"
14" – 22"
3 lb.
Seat width
15" – 24" Gentle
15" – 20" Max
15" – 22" Gentle
15" – 20" Max
3.05 lb. Stabilite
4.20 lb. Flovair
15" – 20" 250 lb.
21" – 24" 350 lb.
2 years
Seat depth
Product weight
Weight capacity
14" – 20" W
Seat depth
300 lb.
500 lb.
2 years
Product weight
Weight capacity
Limited warranty
21" – 24" W
Limited warranty
All weights/measurements are approximate
®
Infinity Cushions (pages 3-4)
LoContour
13" – 22"
15" – 20"
4 lb.
Gentle Contour
13" – 22"
15" – 20"
4 lb.
Max Contour
13" – 22"
15" – 20"
4 lb.
Seat width
Seat depth
Product weight
Weight capacity
Limited warranty
250 lb.
250 lb.
250 lb.
2 years
2 years
2 years
Invacare Corporation
USA
One Invacare Way
Elyria, Ohio
44035-4190
(800) 333-6900
™
™
™
™
InTouch Propel Back (pages 11-12)
InTouch Personal Back 10 (pages 11-12)
™
™
Width range
16"– 21" (1" increments)
Personal Back 10
Personal Back 10 Plus
Product height
Depth adjust
16.5"
Back height
1.75"
13" – 14" widths
15" – 26" widths
14", 16"
14", 16"
Canada
570 Matheson Blvd. E.
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324
Angle adjust
up to 27°
4 lb.
16", 19"
16", 19"
Product weight
Weight capacity
Limited warranty
Back width
13" – 20", 22", 24", 26"
13" – 20", 22", 24", 26"
300 lb.
2 years
Product weight
13" – 20" widths
22" – 26" widths
Weight capacity
13" – 20" widths
22" – 26" widths
Limited warranty
5 lb.
6 lb.
10 lb.
11 lb.
All weight/measurements are approximate
© 2010
Invacare Corporation.
250 lb.
500 lb.
2 years
250 lb.
500 lb.
2 years
™
InTouch PCS Back (pages 9-10)
All rights reserved.
Trademarks are
identified by the symbols
™ and ®.
All trademarks are
owned by or licensed to
Invacare Corporation
unless otherwise noted.
FloGel is a registered
trademark of S.N.F.
Available widths: 14" – 24" (1" increments)
Height: 16" (Regular); 20" (Tall)
Depth adjustment: 1.5" to the back
Angle adjust: up to 30°
Product weight: 4.7 lb.
User weight limited: 300 lb. (14" – 21");
500 lb. (22" – 24")
Limited warranty: 2 years
Specifications are
subject to change
without notification.
All weight/measurements are approximate
Form No. 06-043
Rev. 03/10
15
Download from Www.Somanuals.com. All Manuals Search And Download.
|