Interlink electronic Projector X70 X80 User Manual
X70/X80  
Multimedia Projector  
Operator's Guide  
Thank you for purchasing this projector.  
CAUTION Before using, read the "Product Safety Guide" and  
this "Operator's guide" to ensure correct usage through understanding. After  
reading, store them in a safe place for future reference.  
NOTE  
• The information in this manual is subject to change without notice.  
• The manufacturer assumes no responsibility for any errors that may appear in this manual.  
• The reproduction, transmission or use of this document or contents is not permitted without  
express written authority.  
TRADEMARK ACKNOWLEDGMENT :  
• VGA and XGA are registered trademarks of the International Business Machines Corporation.  
• Apple and Mac are registered trademarks of Apple Computer, Inc.  
• VESA and SVGA are trademarks of the Video Electronics Standard Association.  
• Windows is a registered trademark of Microsoft Corporation.  
• Internet Explorer is a trademark of Microsoft Corporation.  
All other trademarks are the property of their respective owners.  
1
© 3M 2004  
3M™ MultDimowendloiaadPfrroomjeWcwtowr.SXom70an/Xua8ls0.com. All Manuals Search And Download.  
Contents  
…………………  
…………………………  
…………………………  
…………  
22  
Projector Features  
Preparation  
Part Names  
2
2
4
Multifunctional Settings  
Using The Menu Functions ……22  
MAIN Menu ………………………23  
PICTURE-1 Menu ………………24  
PICTURE-2 Menu ………………26  
INPUT Menu ……………………27  
AUTO Menu ………………………29  
SCREEN Menu …………………31  
OPTION Menu……………………33  
NETWORK Menu ………………35  
Projector ……………………………4  
Control Buttons ……………………5  
Remote control ……………………5  
……………………………  
Arrangement ………………………6  
Adjusting The Projector’s  
Elevator ……………………………7  
Using The Lens shift Buttons (X80 only) …7  
Connecting Your Devices…………8  
Connecting The Power Supply …11  
Setting Up  
6
………………  
Network Setting Up  
………………………………  
36  
37  
Lamp  
Replacing The Lamp ……………38  
……………………………  
……………………  
Remote Control  
12  
Air Filter  
Caring For The Air Filter…………39  
…………………………  
39  
About The Laser Pointer ………12  
Putting Batteries …………………12  
Operating The  
Other Care  
Caring For The Inside Of  
40  
Remote Control …………………13  
Using The Remote  
ID Feature…………………………13  
Using The Mouse/Keyboard  
Control Function …………………14  
The Projector ……………………40  
Caring For The Lens ……………40  
Caring For The Cabinet And  
Remote Control …………………40  
…………………  
Troubleshooting  
41  
……………………  
Turning On The Power …………15  
Turning Off The Power …………15  
Power ON/OFF  
15  
Related Messages ………………41  
Regarding The Indicator  
Lamps ……………………………43  
Phenomena That May Easily Be  
Mistaken For Machine Defects …45  
…………………………  
Operating  
16  
Selecting An Input Signal ………16  
Selecting The Aspect Ratio ……17  
Using The Automatic  
……………………  
………………………  
Specifications  
Accessories  
47  
48  
Adjustment Feature………………17  
Adjusting The Picture Position …18  
Correcting The Keystone  
TECHNICAL  
Distortion …………………………18  
Adjusting The Volume …………19  
Muting The Sound ………………19  
Temporarily Blanking  
The Screen ………………………19  
Freezing The Screen ……………20  
Using The Magnify Feature ……20  
Displaying The Child Window …21  
Selecting An Audio Input ………21  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up  
Arrangement  
WARNING • Before installation, make sure that the projector is turned off and the  
power cord is disconnected.  
• Do not set up and move the projector, while it is hot.  
• Install the projector in a suitable environment according to instructions of the “Product  
Safety Guide” and this manual.  
• The power outlet should be close to the projector and easily accessible.  
Refer to the illustrations and tables below to determine the screen size and projection  
distance. The values shown in the table are calculated for a full size screen. ( 10%)  
a [inch (m)]  
Min. Max.  
b [inch (cm)]  
Reference for  
the 4:3 aspect ratio  
Screen Size  
[inch (m)]  
C
[inch (cm)]  
X80 :max  
min  
X70  
:
X80  
40 (1.0)  
60 (1.5)  
46(1.2) 71(1.8) 12(30) 24(61) 24(61)  
71(1.8) 107(2.7) 18(46) 36(91) 36(91)  
83(2.1) 126(3.2) 21(53) 42(107) 42(107)  
95(2.4) 144(3.7) 24(61) 48(122) 48(122)  
120(3.0) 181(4.6) 30(76) 60(152) 60(152)  
144(3.7) 217(5.5) 36(91) 72(183) 72(183)  
181(4.6) 272(6.9) 45(114) 90(229) 90(229)  
243(6.2) 364(9.2) 60(152) 120(305) 120(305)  
304(7.7) 455(11.6) 75(191) 150(381) 150(381)  
366(9.3) 547(13.9) 90(229) 180(457) 180(457)  
427(10.9) 638(16.2) 105(267) 210(533) 210(533)  
489(12.4) 730(18.5) 120(305) 240(610) 240(610)  
612(15.5) 913(23.2) 150(381) 300(762) 300(762)  
Screen  
70 (1.8)  
80 (2.0)  
Lens center  
100 (2.5)  
120 (3.0)  
150 (3.8)  
200 (5.1)  
250 (6.4)  
300 (7.6)  
350 (8.9)  
400 (10.2)  
500 (12.7)  
b
C
Side View  
a
a [inch (m)]  
Min. Max.  
b [inch (cm)]  
Screen Size  
[inch (m)]  
Reference for  
the 16:9 aspect ratio  
C
[inch (cm)]  
X80  
:
max  
X80  
:min  
X70  
40 (1.0)  
60 (1.5)  
50(1.3) 77(2.0) 10(25) 23(58) 20(50)  
77(2.0) 117(3.0) 15(37) 34(87) 29(75)  
91(2.3) 137(3.5) 17(44) 40(102) 34(87)  
104(2.6) 157(4.0) 20(50) 46(116) 39(100)  
131(3.3) 197(5.0) 25(62) 57(145) 49(125)  
158(4.0) 237(6.0) 29(75) 69(174) 59(149)  
198(5.0) 297(7.5) 37(93) 86(218) 74(187)  
265(6.7) 396(10.1) 49(125) 114(291) 98(249)  
332(8.4) 496(12.6) 61(156) 143(363) 123(311)  
399(10.1) 596(15.1) 74(187) 172(436) 147(374)  
466(11.8) 696(17.7) 86(218) 200(508) 172(436)  
533(13.5) 795(20.2) 98(249) 229(581) 196(498)  
600(15.2) 895(22.7) 110(280) 257(654) 221(560)  
Screen  
70 (1.8)  
Lens center  
80 (2.0)  
C
100 (2.5)  
120 (3.0)  
150 (3.8)  
200 (5.1)  
250 (6.4)  
300 (7.6)  
350 (8.9)  
400 (10.2)  
450 (11.4)  
b
a
Side View  
6
Download from Www.Somanuals.com. A©ll M3aMnu2al0s0S4earch A3ndMD™ownMloaudl.timedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up (continued)  
Connecting Your Devices  
WARNING • Whenever attempting to connect other devices to the projector, read  
thoroughly the "Product Safety Guide", this manual and the manual of each device  
to be connected. Incorrect connecting could result in fire or electrical shock.  
CAUTION • TURN OFF ALL DEVICES prior to connecting them to the projector.  
Attempting to connect a live device to the projector may generate extremely loud  
noises or other abnormalities that may result in malfunction and/or damage to the  
device and/or projector.  
ATTENTION • Make sure that you connect devices to the correct port. Incorrect  
connection may result in malfunction and/or damage to the device and/or projector.  
Refer to the section “Technical” of this manual for the pin assignment of connectors and  
RS-232C communication data.  
• Some cables have to be used with core set. Use the accessory cable or a  
designated-type cable for the connection. For cables that have a core only at one  
end, connect the core to the projector.  
• Secure the screws on the connectors and tighten.  
• Whenever attempting to connect a laptop computer to the projector, be sure to  
activate the laptop’s RGB external image output (set the laptop to CRT display or to  
simultaneous LCD and CRT display). For details on how this is done, please refer to  
the instruction manual of the corresponding laptop computer.  
NOTE  
• Some computers may have multiple display screen modes. Use of some of  
these modes may not be compatible with this projector.  
• For some RGB input modes, the optional Mac adapter is necessary.  
• When the image resolution is changed on a computer, depending on an input,  
automatic adjust function may take some time and may not be completed. In this  
case, you may not be able to see a check box to select “Yes/No” for the new  
resolution on Windows. Then the resolution will go back to the original. It might be  
recommended to use other CRT or TFT monitors to change the resolution.  
NOTE  
Plug-and-Play Capability  
• Plug-and-Play is a system incorporated in the computer, its operating system and  
peripheral equipment (i.e. display devices).  
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by  
connecting this projector to computers that are VESA DDC (display data channel)  
compatible.  
• Please take advantage of this function by connecting the accessory RGB cable to the  
RGB port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other  
type of connection is attempted.  
• Please use the standard drivers in your computer as this projector is a Plug-and-Play  
monitor.  
8
Download from Www.Somanuals.com. A©ll M3Manu2al0s0S4earch A3ndMD™ownMloaudl.timedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up (continued)  
Examples of connection with a VCR/DVD Player  
VCR/DVD Player  
Projector  
control  
network  
remote control  
audio out  
audio in1  
audio in2  
R-audio in-L video in  
CR/PR  
Y
Ca/Pa  
rgb  
rgb out  
V
Audio out (R)  
Audio out (L)  
Video out  
R-audio in  
audio in-L  
video in  
R/CR/PR  
G/Y  
B/CB/PB  
H
HI  
H
I
R-audio in-L video in  
S-video in  
BNC  
■ If using a s-video signal  
J
H
S-video out  
S-video cable  
S -video in  
control  
network  
remote control  
audio out  
audio in1  
audio in2  
CR/PR  
Y
Ca/Pa  
rgb  
rgb out  
V
R-audio in-L video in  
H
J
R/CR/PR  
G/Y  
B/CB/PB  
H
R-audio in-L video in  
S-video in  
Audio out (R)  
Audio out (L)  
R-audio in  
BNC  
audio in-L  
■ If using a component signal  
component  
CR/PR out  
CB/PB out  
Y out  
CR/PR  
CB/PB  
K
H
control  
network  
remote control  
audio out  
Y
audio in1  
audio in2  
K
CR/PR  
Y
Ca/Pa  
rgb  
rgb out  
V
H
R/CR/PR  
G/Y  
B/CB/PB  
H
R-audio in-L video in  
R-audio in-L video in  
S-video in  
Audio out (R)  
Audio out (L)  
R-audio in  
BNC  
audio in-L  
■ If using a SCART RGB input  
component  
R-audio in-L video in  
control  
network  
remote control  
audio out  
R (CR/PR)  
audio in1  
audio in2  
K
CR/PR  
Y
Ca/Pa  
rgb  
rgb out  
V
B (CB/PB)  
G (Y)  
K
SCART  
R/CR/PR  
G/Y  
B/CB/PB  
H
HI  
R-audio in-L video in  
S-video in  
RGB out  
BNC  
R-audio in  
audio in-L  
video in  
H
I
SCART  
adapter  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
About The Laser Pointer  
WARNING • The laser pointer of the remote control is used in place of a finger or  
rod. Never look directly into the laser beam outlet or point the laser beam at other  
people. The laser beam can cause vision problems.  
CAUTION • Use of controls or adjustments or performance of procedures other  
than those specified herein may result in hazardous radiation exposure.  
AVOID EXPOSURE-LASER  
RADIATION IS EMITTED  
FROM THIS APERTURE  
C A U T I O N  
LASER RADIATION  
DO NOT STARE INTO BEAM  
WAVE LENGTH: 640-660nm  
MAX OUTPUT: 1mW  
CLASS  
2
LASER PRODUCT  
Comples with 21 CFR, 1040.10 AND 1040.11  
IEO60825-1:1993+A1:1997+A2:2001  
LASER-STRAHLING  
NICHT IN DEN STRAHL BLICKEN  
LASER KLASSE  
2
WAVE LENGTH:640-660nm MAX OUTPUT:1mW  
レーザー光  
ビームをのぞきこまないこと  
クラス2レーザー製品  
　JIS  
C
6802（1998）  
レーザー光をのぞき込まないこと。  
レーザー光を人に向けないこと。  
子供に使わせないこと。  
最大出力：1.0mW　波長：640－660nm  
MODEL:H-IRC4  
H
C
R
A
E
S
MANUFACTURER:  
MANUFACTURED  
B
JANUARY,2003  
製造者：INTERLINK ELECTRONICS  
INTERLINK K.K.  
1-10-7 HIGASHIKANDA CHIYODA-KU,TOKYO,JAPAN  
101-0031  
P S  
C
MADE IN CHINA  
This remote control has a laser pointer in place of a finger or rod. The laser beam works and the  
LASER INDICATOR lights while the LASER button is pressed.  
Putting Batteries  
CAUTION • About the battery  
• Keep a battery away from children and pets.  
• Use only the battery specified: two AA batteries.  
• Do not mix new battery with used one.  
• Make sure the plus and minus terminals are correctly aligned when loading the  
battery (as indicated in the remote control).  
• Dispose of batteries in accord with environmental laws.  
Remove the battery  
cover.  
Slide back and  
remove the battery  
cover in the direction  
of the arrow.  
Close the battery  
cover.  
Replace the battery  
cover in the direction  
of the arrow and snap  
it back into place.  
Insert the batteries.  
Align and insert the  
two AA batteries  
according to their plus  
minus terminals (as  
indicated in the remote  
control).  
1
2
3
© 3M 2004 3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control (continued)  
Using The Mouse/Keyboard Control Function  
CAUTION • Before connecting, read the manuals of the device you will connect.  
Mistaken use of the mouse/keyboard control could damage your equipment.  
• Only connect to a PC or an USB Hub connected PC.  
• Do not unplug the connector cables while the computer is operating.  
Using the USB control feature, you can use the remote control as a simplified mouse or  
keyboard of the computer.  
Connect the M1-D port of the projector to the computer via the M1-D cable. Then  
functions illustrated below will be enabled.  
memo The USB c ontrol c a n b e us e d with  
LASER INDICATOR  
STANDBY/ON VIDEO  
RGB  
Windows 95 OSR 2.1 or higher. It may not be  
possible to use the remote control, depending  
on the computer’s configurations and mouse  
drivers.  
+
+
+
LENS SHIFT FOCUS ZOOM  
–
–
–
Mouse left button  
BLANK ASPECT LASER  
PREVIOUS  
NEXT  
MOUSE  
MENU  
memo The function can be used only for the  
functions illustrated on the right.  
Mouse move pointer  
Keyboard  
ESC  
POSITION RESET  
AUTO  
memo The projector would be enumerated as a  
mous e a nd a ke yb oa rd of HID (Huma n  
Inte rfa c e De vic e ) c la s s d e vic e s , a fte r  
connecting cable.  
Arrow keys / / /  
MAGNFY  
ON  
PinP  
VOLUME  
FREEZE MUTE  
KEYSTONE SEARCH  
OFF  
Mouse right button  
Keyboard ESC key  
1
2
3
ID CHANGE  
(Front)  
(Rear)  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating  
Selecting An Input Signal  
Select an input signal.  
1
SEARCH button  
■ Using the INPUT dial  
Turn the INPUT dial of the projector.  
Turning the dial cycles through the input ports as  
shown below. Select the signal you wish to project.  
search  
M1-D  
input  
rgb  
BNC  
reset  
component  
S-video  
ENTER  
M1-D  
video  
rgb  
BNC  
menu  
video  
S-video  
component  
INPUT dial  
■ Using SEARCH button  
Press the SEARCH button of the projector or the  
remote control.  
Pressing the button automatically cycles through input  
ports and displays the picture of retrieved signal.  
memo If no signal is found or the projector is unstable to  
find an input signal at any of its ports, it will turn to the state  
it was in prior to the search.  
VIDEO button  
LASER INDICATOR  
RGB button  
STANDBY/ON VIDEO  
RGB  
M1-D  
video  
rgb  
BNC  
+
+
+
LENS SHIFT FOCUS ZOOM  
–
–
–
BLANK ASPECT LASER  
S-video  
component  
PREVIOUS  
NEXT  
MOUSE  
MENU  
■ Using RGB button  
Press the RGB button of the remote control.  
Pressing the button toggles between the RGB ports  
as shown below Select the signal you wish to project.  
ESC  
SEARCH button  
POSITION RESET  
AUTO  
MAGNFY  
ON  
PinP  
VOLUME  
FREEZE MUTE  
KEYSTONE SEARCH  
OFF  
M1-D  
rgb  
BNC  
1
2
3
ID CHANGE  
■ Using VIDEO button  
focus  
zoom  
Press the VIDEO button of the remote control.  
Pressing the button toggles between the VIDEO ports  
as shown below Select the signal you wish to project.  
component  
S-video  
video  
ZOOM  
buttons  
FOCUS  
buttons  
Use the ZOOM buttons to adjust the screen size.  
Use the FOCUS buttons to adjust the focus.  
2
3
© 3M 2004 3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Operating (continued)  
Selecting The Aspect Ratio  
Press the Aspect button to toggle between the  
modes for aspect ratio.  
1
LASER INDICATOR  
■ At a M1-D signal  
STANDBY/ON VIDEO  
RGB  
+
+
+
16:9  
NORMAL  
4:3  
LENS SHIFT FOCUS ZOOM  
–
–
–
ASPECT button  
BLANK ASPECT LASER  
PREVIOUS  
NEXT  
memo NORMAL keeps the original aspect ratio of the  
input signal.  
MOUSE  
MENU  
ESC  
■ At a RGB signal (not M1-D)  
POSITION RESET  
AUTO  
MAGNFY  
ON  
PinP  
VOLUME  
FREEZE MUTE  
KEYSTONE SEARCH  
16:9  
4:3  
OFF  
1
2
3
■ At a video signal  
ID CHANGE  
16:9  
4:3  
SMALL  
memo At a HDTV signal of 1125i or 750p, only 16:9 can  
be selected.  
Using The Automatic Adjustment Feature  
memo The automatic adjustment operation requires approximately 10 seconds. Also,  
please note that it may not function correctly with some input.  
Press the AUTO button.  
1
■ At a RGB signal  
LASER INDICATOR  
STANDBY/ON VIDEO  
RGB  
The Vertical position (V POSITION), the horizontal  
position (H POSITION), the clock phase (H PHASE)  
and horizontal size (H SIZE) will be automatically  
adjusted.  
+
+
+
LENS SHIFT FOCUS ZOOM  
–
–
–
BLANK ASPECT LASER  
PREVIOUS  
NEXT  
memo Make sure that the application window is set to  
its maximum size prior to attempting to use this feature.  
Dark pictures may still be incorrectly adjusted. Use a  
bright screen when adjusting.  
MOUSE  
MENU  
AUTO button  
ESC  
POSITION RESET  
AUTO  
MAGNFY  
ON  
PinP  
VOLUME  
FREEZE MUTE  
KEYSTONE SEARCH  
OFF  
■ At a video signal  
1
2
3
The signal type mode best suited for the respective  
input signal will be selected automatically.  
ID CHANGE  
memo This function is available only when the AUTO is  
selected to the item VIDEO of the INPUT menu. For a  
component video signal, the signal type is identified  
automatically independently of this function.  
17  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating (continued)  
Adjusting The Picture Position  
memo This function is available only for RGB signals.  
Press the POSITION button.  
As illustrated on the right, a  
dialog will appear on the  
screen to aid you in adjusting  
LASER INDICATOR  
1
STANDBY/ON VIDEO  
RGB  
+
+
+
LENS SHIFT FOCUS ZOOM  
–
–
–
BLANK ASPECT LASER  
POSITION  
Cursor  
buttons  
the position.  
PREVIOUS  
NEXT  
MOUSE  
MENU  
Use the cursor buttons / / / to adjust the  
position.  
2
3
ESC  
POSITION  
button  
POSITION RESET  
AUTO  
memo When you want to initialize the position, press  
the RESET button during adjustment.  
MAGNFY  
ON  
PinP  
VOLUME  
FREEZE MUTE  
KEYSTONE SEARCH  
OFF  
1
2
3
Press the POSITION button again to close the  
dialog and complete this operation.  
RESET  
button  
ID CHANGE  
memo Even if you don't do anything, the dialog will  
automatically disappear after a few seconds.  
Correcting The Keystone Distortion  
Press the KEYSTONE button.  
LASER INDICATOR  
1
KEYSTONE  
STANDBY/ON VIDEO  
RGB  
As illustrated on the right, a dialog  
will appear on the screen to aid you  
in correcting the keystone  
distortion.  
+
+
+
LENS SHIFT FOCUS ZOOM  
–
–
–
BLANK ASPECT LASER  
Cursor  
buttons  
PREVIOUS  
NEXT  
MOUSE  
MENU  
Use the cursor buttons  
select the direction of distortion to  
correct ( or ).  
/
to  
2
+
+
0
0
ESC  
POSITION RESET  
AUTO  
MAGNFY  
ON  
PinP  
VOLUME  
FREEZE MUTE  
KEYSTONE SEARCH  
OFF  
Use the cursor buttons  
distortion.  
/
to correct the  
3
4
1
2
3
KEYSTONE  
button  
ID CHANGE  
Press the KEYSTONE button again to close the  
dialog and complete this operation.  
memo Even if you don't do anything, the dialog will  
automatically disappear after a few seconds.  
memo When this adjustment is excessive, certain  
degradation may appear on the picture. Also,  
please note that it may not function correctly with  
some input.  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating (continued)  
Adjusting The Volume  
VOLUME  
Press the VOLUME button.  
LASER INDICATOR  
1
STANDBY/ON VIDEO  
RGB  
As illustrated on the right, a dialog  
will appear on the screen to aid you  
in adjusting the volume.  
+
+
+
LENS SHIFT FOCUS ZOOM  
–
–
–
BLANK ASPECT LASER  
Cursor  
buttons  
PREVIOUS  
NEXT  
Use the cursor buttons  
adjust the volume.  
/
to  
MOUSE  
MENU  
2
3
16  
ESC  
POSITION RESET  
AUTO  
Press the VOLUME button again to close the  
dialog and complete this operation.  
MAGNFY  
ON  
PinP  
VOLUME  
VOLUME  
button  
FREEZE MUTE  
KEYSTONE SEARCH  
OFF  
1
2
3
memo Even if you don't do anything, the dialog will  
ID CHANGE  
automatically disappear after a few seconds.  
LASER INDICATOR  
Muting The Sound  
STANDBY/ON VIDEO  
RGB  
+
+
+
LENS SHIFT FOCUS ZOOM  
–
–
–
Press the MUTE button.  
VOLUME  
BLANK ASPECT LASER  
1
As illustrated on the right, a dialog  
will appear on the screen indicating  
that you have muted the sound.  
PREVIOUS  
NEXT  
MOUSE  
MENU  
ESC  
Press the MUTE or VOLUME  
button to restore the sound.  
POSITION RESET  
AUTO  
2
MAGNFY  
ON  
PinP  
VOLUME  
16  
FREEZE MUTE  
KEYSTONE SEARCH  
MUTE  
button  
OFF  
memo Even if you don't do anything,  
the dialog will automatically  
1
2
3
ID CHANGE  
disappear after a few seconds.  
Temporarily Blanking The Screen  
LASER INDICATOR  
STANDBY/ON VIDEO  
RGB  
BLANK  
button  
+
+
+
Press the BLANK button.  
The input signal screen will shut off, and a BLANK  
screen will appear.  
LENS SHIFT FOCUS ZOOM  
–
–
–
1
BLANK ASPECT LASER  
PREVIOUS  
NEXT  
memo You can set the BLANK screen using the  
menu. Please refer to the item “BLANK” of the  
table of the section “SCREEN Menu”.  
MOUSE  
MENU  
ESC  
POSITION RESET  
AUTO  
MAGNFY  
ON  
PinP  
VOLUME  
FREEZE MUTE  
KEYSTONE SEARCH  
OFF  
Press the BLANK button again to remove the  
2
1
2
3
blank screen, and return to the input signal screen.  
ID CHANGE  
19  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating (continued)  
Freezing The Screen  
Press the FREEZE button.  
As illustrated on the right, a  
dialog will appear on the  
screen, and the screen will  
freeze at the current image.  
LASER INDICATOR  
1
STANDBY/ON VIDEO  
RGB  
+
+
+
LENS SHIFT FOCUS ZOOM  
–
–
–
BLANK ASPECT LASER  
FREEZE  
PREVIOUS  
NEXT  
MOUSE  
MENU  
Press the FREEZE button again to restore the  
screen to normal.  
The icon “||” will change to the icon “ ”. And after  
a couple of seconds, the dialog will be closed and  
the screen will be restored to normal.  
2
ESC  
FREEZE  
button  
POSITION RESET  
AUTO  
MAGNFY  
ON  
PinP  
VOLUME  
FREEZE MUTE  
KEYSTONE SEARCH  
OFF  
1
2
3
memo The freezing feature will automatically finish if a remote control’s  
button that changes some display state (ex. blanking the screen,  
displaying a dialog or a menu, adjusting the picture, changing the input  
signal) is pressed, or a button of projector is pressed.  
ID CHANGE  
NOTE  
•
If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode),  
the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.  
Using The Magnify Feature  
ON  
Press the MAGNIFY  
1
LASER INDICATOR  
button.  
STANDBY/ON VIDEO  
RGB  
As illustrated on the right, a dialog  
will appear on the screen to aid  
you in magnifying the picture.  
+
+
+
LENS SHIFT FOCUS ZOOM  
–
–
–
BLANK ASPECT LASER  
MAGNIFY  
Cursor  
buttons  
PREVIOUS  
NEXT  
MOUSE  
MENU  
Press the POSITION button, then use the cursor  
buttons / / / to select the area to zoom.  
2
3
4
5
ESC  
POSITION  
button  
POSITION RESET  
AUTO  
MAGNFY  
ON  
PinP  
VOLUME  
Press the POSITION button again to finalize the  
zoom area.  
FREEZE MUTE  
KEYSTONE SEARCH  
OFF  
1
2
3
MAGNIFY  
buttons  
ID CHANGE  
Use the cursor buttons  
level.  
/
to adjust the zoom  
OFF  
Press the MAGNIFY  
button again to close the  
dialog and complete this operation.  
memo The magnify feature will automatically finish if the  
automatic adjustment is execute, or the aspect, the signal  
type mode of video or the signal input state is changed.  
20  
Download from Www.Somanuals.com. All Manuals©Se3aMrch2A0n0d4Downlo3adM. ™ Multimedia Projector X70/X80  
Operating (continued)  
Displaying The Child Window  
memo This feature called "PinP (Picture in Picture)" is available only when a RGB signal is  
selected to main screen.  
Press the PinP button.  
The child window with a picture of a video signal  
will appear.  
LASER INDICATOR  
1
STANDBY/ON VIDEO  
RGB  
+
+
+
LENS SHIFT FOCUS ZOOM  
–
–
–
BLANK ASPECT LASER  
Press the PinP button again to change the size of  
the child window or close the window.  
2
PREVIOUS  
NEXT  
MOUSE  
MENU  
Small child window  
Large child window  
ESC  
PinP button  
POSITION RESET  
AUTO  
No child window  
MAGNFY  
ON  
PinP  
VOLUME  
FREEZE MUTE  
KEYSTONE SEARCH  
OFF  
memo You can select the video signal to display in the  
child window, and the position of the child window.  
Please refer to the items “P.INP. INPUT” and “P.INP.  
POSIT.” of the table of the section “INPUT Menu”.  
1
2
3
ID CHANGE  
Selecting An Audio Input  
memo This feature is available only when the child window is on the screen.  
When the child window is on the  
VOLUME  
LASER INDICATOR  
1
2
RGB  
Video  
screen, press the VOLUME button.  
As illustrated on the right, a dialog  
will appear on the screen.  
STANDBY/ON VIDEO  
RGB  
+
+
+
LENS SHIFT FOCUS ZOOM  
–
–
–
BLANK ASPECT LASER  
Cursor  
buttons  
PREVIOUS  
NEXT  
Use the cursor buttons  
select an audio input.  
/
to  
MOUSE  
MENU  
16  
RGB (Audio input for the main screen)  
ESC  
POSITION RESET  
AUTO  
VOLUME  
button  
MAGNFY  
ON  
PinP  
VOLUME  
FREEZE MUTE  
KEYSTONE SEARCH  
Video (Audio input for the child window)  
OFF  
1
2
3
memo You also can adjust the volume using the cursor  
buttons . Please refer to the section “Adjusting  
The Volume”.  
ID CHANGE  
/
Press the VOLUME button again to close the  
dialog and complete this operation.  
3
memo Even if you don’t do anything, the dialog will  
automatically disappear after a few seconds.  
21  
© 3M 2004  
3M™ MultiDmoewdniloaaPd rfroojmecWtowrw.XSo7m0a/Xnu8al0s.com. All Manuals Search And Download.  
Multifunctional Settings  
Using The Menu Functions  
This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO,  
SCREEN, OPTION and NETWORK. Each of these menus is operated using the same  
methods. The basic operations of these menus are as follows.  
ex. Turning off the built-in speaker  
1) Press the MENU button.  
LASER INDICATOR  
Press the MENU button.  
The menu will appear on  
the screen.  
STANDBY/ON VIDEO  
RGB  
1
+
+
+
LENS SHIFT FOCUS ZOOM  
MENU  
–
–
–
Cursor  
buttons  
MAIN  
BRIGHT  
+0  
BLANK ASPECT LASER  
PICTURE-1  
PICTURE-2  
INPUT  
CONTRAST  
ASPECT  
WHISPER  
MIRROR  
LANGUAGE  
[Language]  
RESET  
+0  
4:3  
NORMAL  
NORMAL  
ENGLISH  
AUTO  
SCREEN  
OPTION  
NETWORK  
: SELECT  
PREVIOUS  
NEXT  
MOUSE  
MENU  
MENU  
button  
Use the cursor buttons  
ESC  
2) Select the “OPTION”  
2
POSITION RESET  
AUTO  
/
to select a menu,  
MAGNFY  
ON  
PinP  
VOLUME  
using the  
press the  
button, then  
button.  
FREEZE MUTE  
KEYSTONE SEARCH  
RESET  
button  
then press the  
ENTER) button to  
progress.  
(or the  
OFF  
1
2
3
MENU  
MENU  
ID CHANGE  
MAIN  
VOLUME  
16  
MAIN  
VOLUME  
16  
PICTURE-1  
PICTURE-2  
INPUT  
SPEAKER  
IR REMOTE  
IR REMOTE ID  
LAMP TIME  
FILTER TIME  
SERVICE  
TURN ON  
PICTURE-1  
PICTURE-2  
INPUT  
SPEAKER  
IR REMOTE  
IR REMOTE ID  
LAMP TIME  
FILTER TIME  
SERVICE  
TURN ON  
ESC button  
ALL  
1234 h  
4321 h  
ALL  
1234 h  
4321 h  
AUTO  
AUTO  
The display of the  
selected menu will  
appear.  
SCREEN  
OPTION  
NETWORK  
: SELECT  
SCREEN  
OPTION  
NETWORK  
: SELECT  
RESET  
RESET  
3) Select the “SPEAKER”  
Use the cursor buttons  
3
4
using the  
press the  
MENU  
button, then  
button.  
/
to select an item,  
ENTER  
button  
then press the  
ENTER) button to  
progress.  
(or the  
MAIN  
VOLUME  
16  
OPTION  
PICTURE-1  
PICTURE-2  
INPUT  
SPEAKER  
IR REMOTE  
IR REMOTE ID  
LAMP TIME  
FILTER TIME  
SERVICE  
TURN ON  
SPEAKER  
TURN ON  
TURN OFF  
ALL  
1234 h  
4321 h  
AUTO  
SCREEN  
OPTION  
NETWORK  
: SELECT  
The operation display of  
the selected item will  
appear.  
RESET  
4) Use the cursor button  
Use the cursor buttons  
/
to operate the item.  
to select the “TURN OFF”.  
memo  
When you want to reset the adjustment,  
OPTION  
SPEAKER  
TURN ON  
TURN OFF  
press the RESET button during the operation. Note  
that the items whose functions are performed  
simultaneously with operating (ex. LANGUAGE,  
WHISPER, H PHASE etc.) are not reset.  
memo  
When you want to return to the previous  
display, press the or ESC button.  
5) Press the MENU button.  
Press the MENU button again to close the menu  
display and complete this operation.  
5
memo  
Even if you don’t do anything, the menu will  
automatically disappear after a few seconds  
22  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multifunctional Settings (continued)  
MENU  
MAIN  
BRIGHT  
CONTRAST  
ASPECT  
WHISPER  
MIRROR  
LANGUAGE  
[Language]  
RESET  
+0  
+0  
4:3  
NORMAL  
NORMAL  
ENGLISH  
MAIN Menu  
PICTURE-1  
PICTURE-2  
INPUT  
AUTO  
With the MAIN menu, the items shown in the table below can be  
performed. Perform each operation in accordance with the  
instructions in the table below.  
SCREEN  
OPTION  
NETWORK  
: SELECT  
Item  
Description  
BRIGHT  
Adjust the brightness using the  
Adjust the contrast using the  
/
buttons. : Light ꢀ Dark  
buttons. : Strong ꢀ Weak  
buttons. :  
CONTRAST  
/
Select an aspect ratio using the  
■ At a M1-D signal  
/
NORMAL ꢀ 4:3 ꢀ 16:9  
The NORMAL keeps the original aspect ratio of the input signal.  
■ At a RGB signal (not M1-D)  
4:3 ꢀ 16:9  
ASPECT  
■ At a video signal  
4:3 ꢀ 16:9 ꢀ SMALL  
memo At a HDTV signal of 1125i or 750p, only the 16:9 can be selected.  
Select the NORMAL or the WHISPER using the  
/
buttons. :  
NORMAL ꢀ WHISPER  
When the WHISPER is selected, acoustic noise and screen brightness are  
reduced.  
WHISPER  
MIRROR  
Select a mirror status using the  
/
buttons. :  
NORMAL ꢀ H:INVERT ꢀ V:INVERT ꢀ H&V:INVERT  
ex.  
Select a menu language using the  
/
buttons. :  
ENGLISH ꢀ FRANÇAIS ꢀ DEUTSCH ꢀ ESPAÑOL ꢀ ITALIANO  
LANGUAGE  
RESET  
NORSK ꢀ NEDERLANDS ꢀ 日本語 ꢀ PORTUGUÊS ꢀ 中文  
ꢀ SVENSKA ꢀ  
ꢀ SUOMI ꢀ POLSKI  
Select the EXECUTE using the  
button to reset the MAIN menu items. :  
EXECUTE ꢁ CANCEL  
The items of the MAIN menu are collectively returned to the initial setting. Note  
that the items “WHISPER” and “LANGUAGE” are not reset.  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multifunctional Settings (continued)  
MENU  
MAIN  
GAMMA  
NORMAL  
+0  
+0  
+0  
+0  
+0  
+0  
LOAD1  
PICTURE-1 Menu  
With the PICTURE-1 menu, the items shown in the table below can  
be performed. Perform each operation in accordance with the  
instructions in the table below.  
PICTURE-1  
PICTURE-2  
INPUT  
COLOR BAL R  
COLOR BAL G  
COLOR BAL B  
SHARPNESS  
COLOR  
AUTO  
SCREEN  
OPTION  
NETWORK  
: SELECT  
TINT  
MY MEMORY  
Item  
Description  
buttons. :  
Select a gamma mode using the  
/
NORMAL ꢀ CINEMA ꢀ DYNAMIC ꢀ CUSTOM  
Selecting the CUSTOM and then pressing the  
the CUSTOM menu.  
(or the ENTER) button calls  
CUSTOM Menu  
Select an item using the  
GAMMA  
NORMAL  
CINEMA  
DYNAMIC  
CUSTOM  
GAMMA  
COLOR TEMP  
2.2  
/
buttons, and press the  
HIGH  
100  
100  
100  
R
G
B
(or the ENTER) button to perform each function.  
GAMMA ꢀ COLOR TEMP ꢀ R ꢀ G ꢀ B  
memo The R, G and B can be selected only when the  
USER is selected under the COLOR TEMP.  
: SELECT  
Adjust the gamma data using the  
Up ꢀ Down  
/
buttons. :  
GAMMA  
GAMMA  
Select a color temperature using the  
/
buttons. :  
COLOR TEMP  
HIGH ꢀ MIDDLE ꢀ LOW ꢀ USER  
Adjust the red color level for the USER mode of the COLOR  
TEMP using the buttons. : Strong ꢀ Weak  
R
G
B
/
Adjust the green color level for the USER mode of the COLOR  
TEMP using the buttons. : Strong ꢀ Weak  
/
Adjust the blue color level for the USER mode of the COLOR  
TEMP using the buttons. : Strong ꢀ Weak  
/
Adjust the red color balance using the  
Strong ꢀ Weak  
/
buttons. :  
COLOR BAL R  
COLOR BAL G  
COLOR BAL B  
Adjust the green color balance using the  
Strong ꢀ Weak  
/
buttons. :  
Adjust the blue color balance using the  
Strong ꢀ Weak  
/
buttons. :  
Adjust the sharpness using the  
/
buttons. :  
SHARPNESS  
COLOR  
Clear ꢀ Soft  
memo This item can be selected only at a video signal.  
Adjust the whole color using the  
Strong ꢀ Weak  
/
buttons. :  
memo This item can be selected only at a video signal.  
Adjust the tint using the  
/
buttons. :  
TINT  
Green ꢀ Red  
memo This item can be selected only at a video signal.  
(This table is continued to the following page.)  
© 3M 2004 3M™ Multimedia Projector X70/X80  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multifunctional Settings (continued)  
PICTURE-1 Menu (continued)  
Item  
Description  
Select a command to load or save using the  
/
buttons, and then press  
the  
(or the ENTER) button to perform the function.:  
LOAD1 ꢀ LOAD2 ꢀ LOAD3 ꢀ LOAD4  
SAVE1 ꢀ SAVE2 ꢀ SAVE3 ꢀ SAVE4  
MY MEMORY  
This projector has 4 numbered memories for adjustment data.  
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current adjustment  
data on the memory whose number corresponds with the command’s number.  
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the  
memory whose number corresponds with the command’s number, and adjusts  
the picture automatically depending on the data.  
Select the EXECUTE using the  
button to reset the PICTURE-1 menu items. :  
EXECUTE ꢁ CANCEL  
RESET  
The items of the PICTURE-1 menu are collectively returned to the initial setting.  
Note that the items “MY MEMORY” and “GAMMA” of the CUSTOM menu under  
the item “GAMMA” are not reset.  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multifunctional Settings (continued)  
MENU  
MAIN  
V POSITION  
H POSITION  
H PHASE  
H SIZE  
OVER SCAN  
RESET  
20  
142  
31  
1344  
95  
PICTURE-2 Menu  
PICTURE-1  
PICTURE-2  
INPUT  
With the PICTURE-2 menu, the items shown in the table below can  
be performed. Perform each operation in accordance with the  
instructions in the table below.  
AUTO  
SCREEN  
OPTION  
NETWORK  
: SELECT  
memo This menu cannot be selected at a M1-D signal.  
Item  
Description  
Adjust the vertical position using the buttons. :  
/
V POSITION  
Up ꢀ Down  
memo This item can be selected only at a RGB signal.  
Adjust the horizontal position using the  
/
buttons. :  
H POSITION  
H.PHASE  
Left ꢀ Right  
memo This item can be selected only at a RGB signal.  
Adjust the horizontal phase to eliminate flicker using the  
/
buttons. :  
Right ꢀ Left  
memo This item can be selected only at a RGB signal or a component video  
signal other than a COMPONENT port input of 525i/625i/SCART RGB.  
Adjust the horizontal size using the  
/
buttons. :  
Large ꢀ Small  
memo This item can be selected only at a RGB signal.  
memo When this adjustment is excessive, the picture may not be displayed  
correctly. In such a case, please reset the adjustment pressing the RESET  
button during this operation.  
H SIZE  
Adjust the over-scan ratio using the  
/
buttons. :  
Small ꢀ Large  
OVER SCAN  
RESET  
memo This item can be selected only at a video signal.  
memo When this adjustment is too large, certain degradation may appear at  
the frame area of the picture. In such a case, please adjust small.  
Select the EXECUTE using the  
button to reset the PICTURE-2 menu items. :  
EXECUTE ꢁ CANCEL  
The items of the PICTURE-2 menu are collectively returned to the initial setting.  
Note that the item “H PHASE” is not reset.  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multifunctional Settings (continued)  
MENU  
MAIN  
COLOR SPACE  
COMPONENT  
VIDEO  
3D-YCS  
VIDEO NR  
P. INP. INPUT  
P. INP. POSIT.  
POWERUP INPUT RGB  
AUTO  
COMPONENT  
AUTO  
TURN OFF  
LOW  
VIDEO  
INPUT Menu  
PICTURE-1  
PICTURE-2  
INPUT  
With the INPUT menu, the items shown in the table below can be  
performed. Perform each operation in accordance with the  
instructions in the table below.  
AUTO  
SCREEN  
OPTION  
NETWORK  
: SELECT  
Item  
Description  
Select a color space mode using the  
/
buttons. :  
AUTO ꢀ RGB ꢀ SMPTE240 ꢀ REC709 ꢀ REC601  
Selecting the AUTO automatically selects the optimum mode.  
COLOR SPACE  
memo This item can be selected only at a RGB signal or a component video  
signal other than a COMPONENT port input of 525i/625i/SCART RGB.  
memo The AUTO operation may not work well at some signals. In such a case,  
select the SMPTE240 or the REC709 for a HDTV signal.  
Select a function of COMPONENT port using the  
/
buttons. :  
COMPONENT ꢀ SCART RGB  
COMPONENT  
When the SCART RGB is selected, the COMPONENT port function as a port for  
a SCART RGB signal input. Please refer to the section “Connecting Your  
Devices”.  
Select a signal type mode using the  
/
buttons. :  
AUTO ꢀ NTSC ꢀ PAL ꢀ SECAM ꢀ NTSC4.43 ꢀ M-PAL ꢀ N-PAL  
Selecting the AUTO automatically selects the optimum mode.  
memo This item is performs only at a video signal from the VIDEO port or the S-  
VIDEO port. For a component video signal, the signal type is identified  
automatically independently of this function.  
VIDEO  
memo The AUTO operation may not work well at some signals. If the picture  
becomes unstable (ex. a irregular picture, a color lack), please select the mode  
depending on the input signal.  
Select the TURN ON or the TURN OFF using the  
/
buttons. :  
TURN ON ꢀ TURN OFF  
When the TURN ON is selected, the 3D-YCS mode works for a completely still  
image, or images with few motions.  
3D-YCS  
memo This item performs only at a video signal of NTSC3.58.  
memo When this function performs, the setting of the item “VIDEO NR” of this  
INPUT menu is not effective.  
Select a noise reduction level using the  
/
buttons. :  
HIGH ꢀ MIDDLE ꢀ LOW  
The noise on screen is reduced according to the selected level.  
memo This item performs only at a video signal from the VIDEO port or the S-  
VIDEO port. At a video signal of NTSC3.58, this function performs only when  
the TURN OFF is selected to the item “3D-YSC” of this INPUT menu.  
memo When this adjustment is excessive, certain degradation may appear on  
the picture.  
VIDEO NR  
(This table is continued to the following page.)  
27  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multifunctional Settings (continued)  
INPUT Menu (continued)  
Item  
Description  
Select a signal input port for the child window using the  
/
buttons. :  
video ꢀ S-video  
P.IN P. INPUT  
memo About the child window, please refer to the section “Displaying the Child  
Window”.  
Select the display position of the child window using the  
/
buttons. :  
ꢀ
ꢀ
ꢀ
P.IN P. POSIT.  
memo About the child window, please refer to the section “Displaying the Child  
Window”.  
Select a signal input port to display just when the projector is turned on, using  
the  
/
buttons. :  
POWERUP  
INPUT  
LAST INPUT ꢀ M1-D ꢀ rgb ꢀ BNC ꢀ component ꢀ S-video ꢀ video  
Selecting the LAST INPUT selects the port that was used at the last time.  
Pressing the  
menu.  
(or the ENTER) button displays the INPUT INFORMATION  
The INPUT INFORMATION menu shows the information about the current  
signal input as illustrated below.  
INPUT-INFORMATION  
RGB  
1024x768 @60.0  
FRAME LOCK  
INPUT-INFORMATION  
S-VIDEO  
INPUT-INFORMATION  
COMPONENT  
575i @50  
SECAM  
AUTO  
INFORMATION  
SCART RGB  
memo The “FRAME LOCK” message means the frame lock function is working.  
This function automatically works when a RGB signal with vertical frequency of  
50 to 60 is input, and it displays a moving picture more smoothly.  
memo The “SCART RGB” message means the COMPONENT port is working  
as a SCART RGB port. Please refer to the item “COMPONENT” in this table.  
Select the TURN ON or the TURN OFF using the  
/
buttons. :  
TURN ON ꢀ TURN OFF  
When the TURN ON is selected, an S2-video signal can be identified and the  
optimum aspect ratio is automatically selected.  
memo This item is performs only at a S-VIDEO signal.  
memo When the ASPECT button is used or the item “ASPECT” of the MAIN  
menu is operated, the TURN OFF will be automatically selected to this item.  
S2-ASPECT  
RESET  
Select the EXECUTE using the  
button to reset the INPUT menu items. :  
EXECUTE ꢁ CANCEL  
The items of the INPUT menu are collectively returned to the initial setting. Note  
that the item “INFORMATION” is not reset.  
© 3M 2004 3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Multifunctional Settings (continued)  
MENU  
MAIN  
ADJUST  
AUTO Menu  
PICTURE-1  
PICTURE-2  
INPUT  
POWER OFF  
POWER ON  
SEARCH  
0 min  
TURN ON  
TURN ON  
With the AUTO menu, the items shown in the table below can be  
performed. Perform each operation in accordance with the  
instructions in the table below.  
AUTO  
RESET  
SCREEN  
OPTION  
NETWORK  
: SELECT  
Item  
Description  
(or the ENTER) button performs the automatic adjustment.  
Pressing the  
■ At a RGB signal  
The vertical position (V POSITION), the horizontal position (H POSITION), the  
clock phase (H PHASE) and the horizontal size (H SIZE) will be automatically  
adjusted.  
memo Make sure that the application window is set to its maximum size prior to  
attempting to use this feature. Dark pictures may still be incorrectly adjusted.  
Use a bright screen when adjusting.  
■ At a video signal  
ADJUST  
The signal type mode best suited for the respective input signal will be  
selected automatically.  
memo This function is available only when the AUTO is selected to the item  
“VIDEO” of the INPUT menu. For a component video signal, the signal type is  
identified automatically independently of this function.  
memo This operation requires approximately 10 seconds, and the message  
“AUTO IN PROGRESS” is displayed during the operation.  
memo This operation may not work well at some signals. If the picture  
becomes unstable (ex. a irregular picture, a color lack), please select the  
suitable mode to the item “VIDEO” of the INPUT menu.  
Set the time using the  
/
buttons. :  
Long (max. 99 minutes) ꢀ Short (min. 0 minute = DISABLE)  
AUTO  
POWER OFF  
ENABLE  
AUTO  
POWER OFF  
DISABLE  
POWER OFF  
POWER ON  
1min  
0min  
ex.  
When the time is set to 1 to 99, the projector lamp will go off and the  
STANDBY/ON indicator begins blinking when the passed time with a proper  
signal (without no-signal and an unsuitable signal) reaches at the set time.  
Please refer to the section “Turning Off The Power”.  
Select the TURN ON or the TURN OFF using the  
TURN ON ꢀ TURN OFF  
When the TURN ON is selected, you can turn the projector on without pressing  
/
buttons.:  
the STANDBY/ON button. Please refer to the section “Turning Off The Power”.  
(This table is continued to the following page.)  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multifunctional Settings (continued)  
AUTO Menu (continued)  
Item  
Description  
Select the TURN ON or the TURN OFF using the  
/
buttons. :  
TURN ON ꢀ TURN OFF  
When the TURN ON is selected, detecting no signal cycles through input ports  
and displays the picture of retrieved signal.  
M1-D  
video  
rgb  
BNC  
SEARCH  
S-video  
component  
memo When the TURN ON is selected, pressing the RGB button selects the  
M1-D ports, and pressing the VIDEO button selects the component port.  
memo If no signal is found or the projector is unstable to find an input signal at  
any of its ports, it will return to the state it was in prior to the search.  
Select the EXECUTE using the  
button to reset the AUTO menu items. :  
EXECUTE ꢁ CANCEL  
The items of the AUTO menu are collectively returned to the initial setting. Note  
RESET  
that the item “ADJUST” is not reset.  
© 3M 2004 3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
Multifunctional Settings (continued)  
MENU  
MAIN  
BLANK  
BLACK  
ORIGINAL  
SCREEN Menu  
PICTURE-1  
PICTURE-2  
INPUT  
START UP  
MyScreen  
MyScreen SIZE  
x1  
With the SCREEN menu, the items shown in the table below can be  
performed. Perform each operation in accordance with the  
instructions in the table below.  
AUTO  
MyScreen LOCK TURN OFF  
MENU POSITION  
SCREEN  
OPTION  
NETWORK  
: SELECT  
MESSAGE  
RESET  
TURN ON  
Item  
Description  
Select a type of the BLANK screen using the  
/
buttons. :  
MyScreen ꢀ ORIGINAL ꢀ BLUE ꢀ WHITE ꢀ BLACK  
The BLANK screen is the screen, which is displayed by pressing the BLANK button.  
The MyScreen is the screen you can register a desired screen, and the  
ORIGINAL is the existing standard screen. The BLUE, the WHITE and the  
BLACK are the non-pattered (plain) screens in each color.  
BLANK  
memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL  
screens will change to the BLACK screen after several minutes.  
memo For the MyScreen, please refer to the item “MyScreen” in this table.  
Select a type of the START UP screen using the  
/
buttons. :  
MyScreen ꢀ ORIGINAL ꢀ TURN OFF  
The START UP screen is the screen, which is displayed by detecting no signal  
or an unsuitable signal.  
The MyScreen is the screen you can register a desired screen, and the  
ORIGINAL is the existing standard screen. When the TURN OFF is selected,  
the BLUE is used.  
START UP  
memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL  
screens will change to the BLANK after several minutes. If also the BLANK  
screen is the MyScreen or the ORIGINAL, it will change to the BLACK screen.  
memo About the MyScreen, please refer to the item “MyScreen” in this table.  
About the BLUE, BLACK and BLANK screens, please refer to the item “BLANK”  
in this table.  
Pressing the  
see the flow chart on the following page.  
(or the ENTER) button starts the MyScreen registration. Please  
MyScreen  
Select the size of the MyScreen using the  
/
buttons. :  
MyScreen SIZE  
x1 ꢀ FULL  
Select the TURN ON or the TURN OFF using the  
/
buttons.:  
TURN ON ꢀ TURN OFF  
The TURN ON disables the operation of the item “MyScreen” of this SCREEN  
menu.  
MyScreen LOCK  
MENU POSITION  
Adjust the menu position using the  
/
/
/
buttons. :  
Up  
ꢂ
Left ꢁ + ꢃ Right  
ꢄ
Down  
memo To finish this operation, press the ESC button but not the  
button.  
(This table is continued to the following page.)  
31  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multifunctional Settings (continued)  
SCREEN Menu (continued)  
Item  
Description  
Select the TURN ON or the TURN OFF using the  
/
buttons. :  
TURN ON ꢀ TURN OFF  
When the TURN ON is selected, the following message function works.  
The message of the “AUTO IN PROGRESS” for the auto adjustment.  
The message of the ”NO INPUT IS DETECTED”  
The message of the ”SYNC IS OUT OF RANGE”  
The message of the ”Searching …”  
MESSAGE  
The message of the “Detecting …”  
The indication of the input signal by input change.  
The indication of the aspect ratio by changing the aspect ratio.  
The indication of “FOCUS” by adjusting the focus.  
Select the EXECUTE using the  
button to reset the SCREEN menu items. :  
RESET  
EXECUTE ꢁ CANCEL  
The items of the SCREEN menu are collectively returned to the initial setting.  
How to register your picture as the MyScreen  
MyScreen is pointed on the SCREEN menu.  
Press the button  
MyScreen  
Do you start capturing this picture?  
ESC  
ENT  
:NO  
:YES  
The MyScreen  
menu appears.  
Do you capture the picture from  
the current screen?  
NO: Press the ESC/RESET button  
If the ESC/RESET  
button is pressed ...  
YES: Press the ENTER button  
The picture freeze and the frame for capturing appears.  
Move the frame to the position of the picture  
MyScreen  
which you want to use, using  
/
/
/
buttons,  
Move the capture area  
as you want.  
and press the ENTER button to register.  
ESC  
:RETURN ENT :NEXT  
My Screen  
Registering.  
It takes about 1 minute to register.  
45%  
Just when the picture registration is completed  
the registered screen and  
MyScreen registration is finished.  
the message of the right is displayed for a few seconds.  
If the picture registration failed,  
the message of the right is displayed for a few seconds.  
A capturing error has occurred.  
Please try again.  
32  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multifunctional Settings (continued)  
MENU  
MAIN  
VOLUME  
16  
OPTION Menu  
PICTURE-1  
PICTURE-2  
INPUT  
SPEAKER  
IR REMOTE  
IR REMOTE ID  
LAMP TIME  
FILTER TIME  
SERVICE  
TURN ON  
ALL  
1234 h  
4321 h  
With the OPTION menu, the items shown in the table below can be  
performed. Perform each operation in accordance with the  
instructions in the table below.  
AUTO  
SCREEN  
OPTION  
NETWORK  
: SELECT  
PIN LOCK  
TURN ON  
Item  
Description  
Adjust the volume using the  
/
buttons. :  
VOLUME  
High ꢀ Low  
Select the TURN ON or the TURN OFF using the  
/
buttons. :  
SPEAKER  
TURN ON ꢀ TURN OFF  
When the TURN ON is selected, the built-in speaker works.  
Select a remote sensor using the  
using the ENTER button (2). :  
(1) 1:FRONT ꢀ 2:TOP ꢀ 3:REAR (2) ꢅ (Off) ꢀ ꢆ (On)  
memo A sensor cannot be turned off when the other two are off.  
Always at least one sensor is on.  
/
button (1), then switch it  
OPTION  
IR REMOTE  
1:FRONT  
2:TOP  
3:REAR  
ENT  
IR REMOTE  
Select a number as an ID number for remote control using the  
/
buttons. :  
ALL ꢀ 1 ꢀ 2 ꢀ 3  
The projector is controlled by the remote control whose ID CHANGE switch is  
set into the position of the same number as this number. When the ALL is  
selected, the projector is controlled by a remote control irrespective of the  
position of the ID CHANGE switch.  
IR REMOTE ID  
memo Please refer to the section “Using The Remote ID Feature”.  
Pressing the RESET button for about 3 seconds displays the LAMP TIME menu.  
Select the RESET using  
button to reset the timer. :  
RESET ꢁ CANCEL  
Selecting the RESET resets the count of the lamp timer to 0.  
LAMP TIME  
memo Perform this function only when you have replaced the lamp. The lamp  
timer counts the used time of the current lamp, to display the messages about  
the lamp. Incorrect performing causes incorrect operation of the messages.  
memo About replacing the lamp, please refer to the section” Lamp”.  
Pressing the RESET button for about 3 seconds displays the FILTER TIME  
menu.  
Select the RESET using  
button to reset the timer. :  
RESET ꢁ CANCEL  
Selecting the RESET resets the count of the lamp timer to 0.  
FILTER TIME  
memo Perform this function only when you have cleaned or replaced the air  
filter. The filter timer counts the used time of the air filter after cleaning or  
replacement, to display the messages about the air filter. Incorrect performing  
causes incorrect operation of the messages.  
memo About caring for the air filter, please refer to the section “Air Filter”.  
(This table is continued to the following page.)  
33  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multifunctional Settings (continued)  
OPTION Menu (continued)  
Item  
Description  
Pressing the  
menu.  
SERVICE Menu  
(or the ENTER) button calls the SERVICE  
SERVICE  
FANSPEED  
AUTO ADJUST  
LENS TYPE  
LENS LOCK  
NORMAL  
ENABLE  
AUTO  
TURN OFF  
Select an item using the  
the ENTER) button to per form each function. :  
FANSPEED ꢀ AUTO ADJUST ꢀ LENS TYPE ꢀ LENS LOCK  
/
buttons, and press the  
(or  
: SELECT  
Select the fan speed level using the  
/
buttons. :  
HIGH ꢀ NORMAL  
The HIGH ups rotation speeds of fans, though. Please use this  
function in using a projector at highlands etc.  
memo Note that the projector is noisier when the HIGH is  
selected.  
FANSPEED  
Select the ENABLE or the DISABLE using the  
buttons. :  
/
ENABLE ꢀ DISABLE  
When you want to keep the current adjustment state, select  
the DISABLE. When the ENABLE is selected, detecting a  
signal change to a RGB signal performs the automatic  
adjustment of the vertical position (V POSITION), the horizontal  
position (H POSITION), the clock phase (H PHASE) and the  
horizontal size (H SIZE).  
AUTO  
ADJUST  
SERVICE  
Select the lens type currently used using the  
AUTO ꢀ 1 ꢀ 2 ꢀ 3 ꢀ 4 ꢀ 5  
/
buttons. :  
Please select depending on the following.  
AUTO: automatically selects optimum mode.  
1: for a standard lens (Type NL-500 etc.)  
2: for a fixed short throw lens (Type FL-501 etc.)  
3: for a short throw lens (Type SL-502 etc.)  
4: for a long throw lens (Type LL-503 etc.)  
5: for a super long throw lens (Type LL-504 etc.)  
LENS TYPE  
memo This setting has an influence on the keystone distortion  
etc.  
memo About the optional lens, ask your dealer.  
Select the TURN ON or the TURN OFF using the  
buttons. :  
/
LENS LOCK  
TURN ON ꢀ TURN OFF  
Selecting the TURN ON locks the adjustment of the lens shift  
(X80 only), the zoom and the focus.  
Select the EXECUTE using the  
button to reset the OPTION menu items. :  
EXECUTE ꢁ CANCEL  
RESET  
The items of the OPTION menu are collectively returned to the initial setting.  
Note that the items “VOLUME”, “LAMP TIME” , “FILTER TIME” and “SERVICE”  
are not reset.  
34  
Download from Www.Somanuals.com. All Manuals©Se3aMrch2A0n0d4Downlo3adM. ™ Multimedia Projector X70/X80  
Multifunctional Settings (continued)  
MENU  
MAIN  
SETUP  
DHCP  
INFORMATION  
RESET  
NETWORK Menu  
PICTURE-1  
PICTURE-2  
INPUT  
TURN OFF  
This projector provides the NETWORK function. If you use this  
function, please set up the projector according to the Network  
environment in which you use it.  
AUTO  
SCREEN  
OPTION  
NETWORK  
: SELECT  
memo The following settings is not required If your network can assign an IP  
address through its DHCP server. The projector is set to DHCP by default.  
Please see the section “Network Setting Up”.  
Item  
Description  
NETWORK - SETUP  
IP ADRRESS  
Pressing the  
IP ADDRESS menu to the right.  
memo This menu will be shown only when the DHCP  
is disabled at the NETWORK menu.  
(or the ENTER) button, displays the  
192 . 168 . 1 .  
ENT  
24  
:NEXT  
ESC  
:RETURN  
The IP Address is identification number of the projector on the Network.  
1. Set the IP Address using the buttons.  
/
memo The same IP Address cannot be used for two devices.  
Pressing the (or the ENTER) button at the IP  
NETWORK - SETUP  
SUBNET MASK  
ADDRESS menu, displays the SUBNET MASK menu.  
The SUBNET MASK is an address of the Network.  
SETUP  
255 . 255 . 255 .  
1
ESC  
ENT  
:NEXT  
:RETURN  
2. Set the address of the Network to be used.  
Pressing the  
(or the ENTER) button at the  
NETWORK - SETUP  
DEFAULT GATEWAY  
SUBNET MASK, shows the DEFAULT GATEWAY  
menu. The DEFAULT GATEWAY is the main device  
to access outside of the Network.  
255 . 255 . 255 .  
0
ESC  
ENT  
:NEXT  
:RETURN  
3. Set the address of the device as gateway to an outer Network.  
NETWORK  
DHCP  
Select the TURN ON or the TURN OFF using the  
/
buttons. :  
TURN ON ꢀ TURN OFF  
If your Network doesn’t support the DHCP function, select the  
TURN ON  
TURN OFF  
DHCP  
TURN OFF.  
Pressing the  
INFORMATION menu.  
The menu shows the information about the current  
Network setting as illustrated right.  
(or the ENTER) button displays the  
NETWORK-INFORMATION  
IP ADRRESS  
192. 168. 1. 24  
SUBNETMASK  
DEFAULT GATEWAY  
MAC ADRRESS  
255. 255. 255. 0  
255. 255. 255. 0  
00. E0. 47. 03. 0C. D8  
INFORMATION  
RESET  
Select the EXECUTE using the  
button to reset the NETWORK menu items. :  
EXECUTE ꢁ CANCEL  
All items on the NETWORK menu are returned to the initial setting.  
35  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Setting Up  
This projector provides the NETWORK function. When you start to use this function,  
please consult your dealer for further information.  
To start, connect the network port to a gateway device via a CAT-5 cable, then set up the  
projector according to the Network environment in which you use it.  
When your Network enables the DHCP function  
The IP Address can be set automatically if the DHCP is "TURN ON" using the NETWORK  
menu. Please refer to the section "NETWORK Menu".  
When your Network doesn’t support the DHCP function  
or When you use a fixed address even if your Network can support the  
DHCP function  
Please set the IP Address, the Subnet Mask, the Default Gateway and the DHCP using  
the NETWORK menu.(Page 35) At first, set the DHCP function to “TURN OFF”.  
You can set them using a Web Browser (Internet Explore 4.0 or higher) on the computer  
connected to the Network.  
Input the same IP address as set to the projector onto the Web Browser on the computer  
connected to LAN.  
ex. Case of IP Address = 192.168.1.11  
1) Input “http://192.168.1.11”.  
2) Click “ENTER”.  
3) Input the required data according to the screen.  
4) Make sure the input data is correct, then click "Write".  
memo These setting will be active after reboot. These  
setting will be stored, and used when DHCP is OFF.  
5) Click “Return to top page”.  
6) Click “REBOOT” to complete this operation.  
© 3M 2004 3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
Lamp  
WARNING  
HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE  
The projector uses a high-pressure mercury glass lamp. The lamp can break with a  
loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time.  
Note that each lamp has a different lifetime, and some may burst or burn out soon after  
you start using them. In addition, when the bulb bursts, it is possible for shards of  
glass to fly into the lamp housing, and for gas containing mercury to escape from the  
projector’s vent holes.  
About disposal of a lamp • This product contains a mercury lamp; do not put in  
trash. Dispose of in accord with environmental laws.  
For lamp recycling, go to www.lamprecycle.org. (in USA)  
For product disposal, contact your local government agency or www.eiae.org (in the  
US) or www.epsc.ca (in Canada).  
For more information, call your dealer.  
• If the lamp should break (it will make a loud bang when it does), unplug  
the power cord from the outlet, and make sure to request a replacement  
lamp from your local dealer. Note that shards of glass could damage the  
projector’s internals, or cause injury during handling, so please do not try  
to clean the projector or replace the lamp yourself.  
• If the lamp should break (it will make a loud bang when it does), ventilate  
the room well, and make sure not to breathe the gas that comes out of  
the projector vents, or get it in your eyes or mouth.  
Disconnect the  
plug from the  
power outlet  
• Before replacing the lamp, make sure the power switch is off and the  
power cable is not plugged in, then wait at least 45 minutes for the lamp  
to cool sufficiently. Handling the lamp while hot can cause burns, as well  
as damaging the lamp.  
• Do not open the lamp door while the projector is suspended from above.  
This is dangerous, since if the lamp’s bulb has broken, the shards will fall  
out when the door is opened. In addition, working in high places is  
dangerous, so ask your local dealer to have the lamp replaced even if  
the bulb is not broken.  
• Use only the lamp of the specified type 78-6969-9718-4 for X70 / 78-  
6969-9719-2 for X80.  
• If the lamp breaks soon after the first time it is used, it is possible that  
there are electrical problems elsewhere besides the lamp. If this  
happens, contact your local dealer or a service representative.  
• Handle with care: jolting or scratching could cause the lamp bulb to  
burst during use.  
• If the indicators or a message prompts you to replace the lamp (see the  
section “Related Messages” and “Regarding the indicator Lamps”),  
replace the lamp as soon as possible. Using the lamp for long periods of  
time, or past the replacement date, could cause it to burst. Do not use  
old (used) lamps; this is a cause of breakage.  
37  
© 3M 2004  
3M™ MulDtiomwendloiaad PfrormojeWcwtowr.SXom7a0n/uXal8s.0com. All Manuals Search And Download.  
Lamp (continued)  
Replacing The Lamp  
If the indicators or a message prompts you to replace the lamp, replace the lamp as soon  
as possible.  
Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at  
least 45 minutes.  
1
Contact your dealer to prepare a new lamp. Tell the dealer your lamp type number.  
If the projector is mounted on the ceiling, or if the lamp has broken, also ask the  
dealer to replace the lamp.  
2
In the case of replacement by yourself,  
Lamp door  
knob  
After making sure that the projector has cooled  
adequately, slide the knob of a lamp door lock as  
shown in the Figure. Then, one side of the lamp door  
is raised. Pull up the lamp door and remove it, as  
shown in the Figure.  
Lamp door  
3
4
Unscrew the 3 screws, and slowly pull out the lamp  
by the handle. Be careful not to touch the inside of  
the lamp case.  
Screws  
Insert the new lamp, and tighten the 3 screws firmly  
to lock it in place.  
P
M
A
L
O
C
5
6
Interlocking the 2 tabs of the lamp door to the  
projector, put the lamp door on the projector. Then  
push the point of the lamp door to fix it, as shown in  
the Figure. Make sure that the lamp door doesn’t  
come up.  
Tabs  
NOTE  
•
Do not use the projector with the lamp door removed. At the lamp replacing, make  
sure that the screws are screwed in firmly. Loose screws could result in damage or injury.  
Turn on the projector, and reset the lamp timer.  
(1) While the projector running, press the MENU button to open the menu.  
(2) Choose the “OPTION” on the menu using the  
button or ENTER button.  
7
button, then press the  
/
(3) Choose the “LAMP TIME” using the  
RESET button for 3 seconds.  
button, then press and hold the  
/
(4) Choose the “RESET” using the  
button.  
memo When the lamp has been replaced after the message of "THE POWER WILL  
TURN OFF AFTER 0hr." is displayed, complete this operation within 10 minutes of  
switching power on.  
memo Incorrectly resetting of the lamp timer (resetting without replacement, or  
neglect of resetting after replacement) will result in incorrect message functions.  
© 3M 2004 3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
Air Filter  
WARNING • Please carefully read the “Product Safety Guide.  
• Before caring, make sure the power switch is off and the power cable is not  
plugged in, then wait at least 45 minutes for the lamp to cool sufficiently.  
• Use only the air filter of the specified type 78-8118-.9187-4.  
• Do not use the projector with the air filter and filter cover removed. The use without  
the air filter could result in damage.  
CAUTION • If the air filter becomes clogged by dust or the like, internal  
temperature rises and could cause malfunction. The power is automatically turned  
off in order to prevent the projector from overheating internally.  
Caring For The Air Filter  
The air filter should be cleaned about every 100 hours. If the indicators or a message  
prompts you to clean the air filter, clean the air filter as soon as possible.  
If the soiling will not come off the air filter, or it becomes damaged, then it needs to be  
replaced. Please replace the air filter as soon as possible.  
memo When you replace the lamp, please replace also the air filter.  
Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at  
least 45 minutes.  
1
After making sure that the projector has cooled adequately, remove the filter cover  
and air filter.  
2
Apply a vacuum cleaner to the top of the filter cover and  
the air filter to clean.  
If the soiling will not come off the air filter, or it becomes  
damaged, it needs to be replaced.  
Hold the release  
buttons of the filter  
cover while pulling  
down it.  
3
If the air filter needs to be replaced, contact your dealer  
to prepare a new air filter. Tell the dealer your air filter  
type.  
Insert the cleaned air filter or a new air filter, and replace  
the filter cover.  
4
5
Hold the release button  
of the air filter while  
pulling out it.  
Turn on the projector power, and reset the filter timer.  
(1) While the projector running, press the MENU button to  
open the menu.  
(2) Choose the “OPTION” on the menu using the  
button, then press the button or ENTER button.  
/
(3) Choose the “FILTER TIME” using the  
press and hold the RESET button for 3 seconds.  
(4) Choose the “RESET” using the button.  
memo Incorrectly resetting of the filter timer (resetting  
button, then  
/
without replacement, or neglect of resetting after replacement) will result in  
incorrect message functions.  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Care  
WARNING • Please carefully read the “Product Safety Guide”.  
• Before caring, make sure the power switch is off and the power cable is not  
plugged in.  
• Be cautious of high temperature. Do not touch about the lens and ventilation  
openings during use or immediately after use prevent a burn.  
• Never try to care for the inside of the unit yourself. Doing so is dangerous.  
• Do not use cleaner or chemicals other than those listed below, including benzene and  
paint thinner.  
• Do not use aerosols or sprays.  
CAUTION • Incorrect care could have adverse influence such as discoloration,  
peeling paint, etc.  
NOTE  
• Do not polish or wipe with hard objects.  
Caring For The Inside Of The Projector  
In order to ensure the safe use of your projector, please have it cleaned and inspected by  
your local dealer about once every 2 years.  
Caring For The Lens  
Turn off the projector, and unplug the power cord.  
1
Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch  
the lens directly with your hand.  
2
Caring For The Cabinet And Remote Control  
Turn off the projector, and unplug the power cord.  
1
Wipe lightly with gauze or a soft cloth.  
2
memo If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water,  
and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Related Messages  
When the unit's power is on, messages such as those shown below may be displayed.  
When any such message is displayed on the screen, please respond as described below.  
If the same message is displayed after the treatment, or if a message other than the  
following appears, please contact your dealer or service company.  
memo Although these messages will be automatically disappeared around several  
minutes, it will be reappeared every time the power is turned on.  
Message  
Description  
The time the lamp timer has counted is approaching  
2000 hours.  
CHANGE THE LAMP  
Preparation of a new lamp, and an early lamp change is  
recommended. After you have change the lamp, please be sure  
to reset the lamp timer.  
AFTER REPLACING LAMP,  
RESET THE LAMP TIMER.  
The time the lamp timer has counted is approaching  
2000 hours, so a lamp change within ** hours is  
recommended.  
When lamp usage reaches 2000 hours, the power will  
automatically be turned off.  
CHANGE THE LAMP  
AFTER REPLACING LAMP,  
RESET THE LAMP TIMER.  
Please change the lamp by referring to the section “Lamp”.  
After you have changed the lamp, please be sure to reset the  
lamp timer.  
THE POWER WILL TURN OFF  
AFTER ** hr.  
CHANGE THE LAMP  
As the time the lamp timer has counted has reached  
2000 hours, the power will soon be automatically  
turned off.  
Please immediately turn the power off, and change the lamp by  
referring to the section “Lamp”. After changing the lamp, please  
be sure to reset the lamp timer.  
AFTER REPLACING LAMP,  
RESET THE LAMP TIMER.  
THE POWER WILL TURN OFF  
AFTER 0 hr.  
(This table is continued to the following page.)  
NOTE  
• A lamp has a finite product life. Lamps are characterized by the fact that,  
after long hours of usage, a lamp will no longer light up, or the lamp will break or burst,  
etc. This projector is equipped with an automatic shut-down function, such that the  
power will automatically be turned off when lamp usage time has reached 2000 hours.  
Please be aware, however, that among lamp types, there are major differences in  
product lifetimes; a lamp may thus fail to light even prior to the functioning of the  
automatic shut-down function of this projector.  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (continued)  
Related Messages  
(continued)  
Message  
Description  
CLEAN THE AIR FILTER  
The time the filter timer has counted has reached 100  
hours.  
Please clean or change the air filter by referring to the section  
“Air Filter”. After caring for the air filter, please be sure to reset  
the filter timer.  
POWER OFF FIRST,  
THEN CLEAN THE AIR FILTER.  
AFTER CLEANING THE AIR  
FILTER,  
RESET THE FILTER TIMER.  
The internal portion temperature is rising.  
Please turn the power OFF, and allow the unit to cool down at  
least 20 minutes. After the projector has sufficiently cooled  
down, please make confirmation of the following items, and  
then turn the power on again.  
CHECK THE AIR FLOW  
• Is there blockage of the air passage aperture?  
• Is the air filter dirty?  
• Does the peripheral temperature exceed 35°C?  
There is no input signal.  
Please confirm the signal input connection, and the status of the  
signal source.  
NO INPUT IS DETECTED  
ON ***  
The horizontal or vertical wavelength of the inputted  
signal is outside of the response parameters of this  
SYNC IS OUT OF RANGE  
ON *** fH *****kHz fV *****Hz  
unit.  
Please confirm the specs for this unit or the signal source  
specs.  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (continued)  
Regarding The Indicator Lamps  
Lighting and flashing of the standby/on indicator, the lamp indicator, and the temp  
indicator have the meanings as described in the table below. Please respond in  
accordance with the instructions within the table. If the same indication is displayed after  
the treatment, or if an indication other than the following is displayed, please contact your  
dealer or service company.  
NOTE  
•
When the interior portion has become overheated, for safety purposes, the  
power source is automatically turned off, and the indicator lamps may also be turned off.  
In such a case, press the “○” (OFF) side of the main power switch, and wait at least 45  
minutes. After the projector has sufficiently cooled down, please make confirmation of  
the attachment state of the lamp and lamp door, and then turn the power on again.  
standby/on  
indicator  
lamp  
temp  
Description  
indicator indicator  
Lighting  
in Orange  
Turned  
Turned  
The projector is in a standby state.  
Please refer to the section “Power On/Off”.  
off  
off  
Blinking  
in Green  
Turned  
Turned  
The projector is warming up.  
Please wait.  
off  
off  
Lighting  
in Green  
Turned  
Turned  
The projector is in an on state.  
Ordinary operations may be performed.  
off  
off  
Blinking  
in Orange  
Turned  
Turned  
The projector is cooling down.  
Please wait.  
off  
off  
The projector is cooling down. A certain error has  
been detected.  
Please wait until the STANDBY/ON indicator finishes blink,  
and then perform the proper response measure using the  
item descriptions below as reference.  
Blinking  
in Red  
(discre-  
tionary)  
(discre-  
tionary)  
The lamp does not light, and there is a possibility  
that interior portion has become heated.  
Please turn the power off, and allow the unit to cool down at  
least 20 minutes. After the projector has sufficiently cooled  
down, please make confirmation of the following items, and  
then turn the power on again.  
Lighting  
in Red  
Lighting  
in Red  
Turned  
off  
• Is there blockage of the air passage aperture?  
• Is the air filter dirty?  
• Does the peripheral temperature exceed 35°C?  
If the s a me ind ic a tion is d is p la ye d a fte r the tre a tme nt,  
please change the lamp by referring to the section “Lamp”.  
(This table is continued to the following page.)  
43  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (continued)  
Regarding The Indicator Lamps  
(continued)  
standby/on  
indicator  
lamp  
temp  
Description  
indicator indicator  
Either there is no lamp and/or lamp door, or either  
of these has not been properly fixed.  
Please turn the power off, and allow the unit to cool down at  
least 45 minutes. After the projector has sufficiently cooled  
down, please make confirmation of the attachment state of  
the lamp and lamp door, and then turn the power on again.  
If the s a me ind ic a tion is d is p la ye d a fte r the tre a tme nt,  
please contact your dealer or service company.  
Lighting  
in Red  
Blinking  
in Red  
Turned  
off  
The cooling fan is not operating.  
Please turn the power off, and allow the unit to cool down at  
least 20 minutes. After the projector has sufficiently cooled  
down, please make confirmation that no foreign matter has  
become caught in the fan, etc., and then turn the power on  
again.  
Lighting  
in Red  
Turned  
Blinking  
in Red  
off  
If the s a me ind ic a tion is d is p la ye d a fte r the tre a tme nt,  
please contact your dealer or service company.  
There is a possibility that the interior portion has  
become heated.  
Please turn the power off, and allow the unit to cool down at  
least 20 minutes. After the projector has sufficiently cooled  
down, please make confirmation of the following items, and  
then turn the power on again.  
• Is there blockage of the air passage aperture?  
• Is the air filter dirty?  
Lighting  
in Red  
Turned  
Lighting  
in Red  
off  
• Does the peripheral temperature exceed 35°C?  
If the s a me ind ic a tion is d is p la ye d a fte r the tre a tme nt,  
please contact your dealer or service company.  
There is a possibility that the interior portion has  
become overcooled.  
Ple a s e us e the unit within the us a g e te mp e ra ture  
parameters (0°C to 35°C). After the treatment, resent the  
power to ON.  
Lighting  
in Green  
Alternative  
Blinking in Red  
It is time to clean the air filter, or there is no air  
filter.  
Ple a s e imme d ia te ly turn the p owe r OFF, a nd c le a n or  
change the air filter by referring to the section “Air Filter”.  
After cleaning or changed the lamp, please be sure to reset  
the filter timer. After the treatment, resent the power to ON.  
Lighting  
in Green  
Simultaneous  
Blinking in Red  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (continued)  
Phenomena That May Easily Be Mistaken For Machine Defects  
WARNING • Never use the projector if abnormal operations such as smoke,  
strange odor, excessive sound, damaged casing or elements or cables,  
penetration of liquids or foreign matter, etc. should occur. In such cases, immediately  
turn off the power switch and then disconnect the power plug from the power outlet  
After making sure that the smoke or odor has stopped, contact your dealer or service  
company.  
Before requesting repair, please check in accordance with the following chart. If the  
situation cannot be corrected, please contact your dealer or service company.  
NOTE  
• Although bright spots or dark spots may appear on the screen, this is a  
unique characteristic of liquid crystal displays, and do not constitute or imply a  
machine defect.  
Reference  
pages  
Phenomenon  
Cases not involving a machine defect  
The electrical power cord is not plugged in.  
11  
15  
Correctly connect the power cord.  
The power switch is not set to the on position.  
Set the power switch to [ | ] (On).  
The main power source has been interrupted during operation  
such as by a power outage (blackout), etc.  
Please turn the power off, and allow the unit to cool down at least 20  
minutes. After the projector has sufficiently cooled down, please turn  
the power on again.  
15  
Power does not  
come on.  
Either there is no lamp and/or lamp door, or either of these has  
not been properly fixed.  
Please turn the power off, and allow the unit to cool down at least 45  
minutes. After the projector has sufficiently cooled down, please  
make confirmation of the attachment state of the lamp and lamp  
door, and then turn the power on again.  
35, 36  
The signal cables are not correctly connected.  
8, 9  
-
Correctly connect the connection cables.  
Signal source does not correctly work.  
Correctly set up the signal source device by referring to the manual  
of the source device.  
Neither sounds  
nor pictures are  
outputted.  
The input changeover settings are mismatched.  
Select the input signal, and correct the settings.  
16  
(This table is continued to the following page.)  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (continued)  
Phenomena That May Easily Be Mistaken For Machine Defects  
(continued)  
Reference  
pages  
Phenomenon  
Cases not involving a machine defect  
The signal cables are not correctly connected.  
Correctly connect the connection cables.  
8, 9  
The volume is adjusted to an extremely low level.  
19, 32  
19  
Pictures are  
displayed,  
but no sounds  
are heard.  
Adjust the VOLUME to a higher level.  
The sound is muted.  
Press the MUTE button to restore the sound.  
The audio input is not correctly selected when the child window  
is displayed.  
Correctly select the audio input.  
22  
The lens cap is attached.  
4, 15  
8, 9  
23  
Remove the lens cap.  
The signal cables are not correctly connected.  
Correctly connect the connection cables.  
Sounds are  
heard,  
but no pictures  
are displayed.  
The brightness is adjusted to an extremely low level.  
Adjust the BRIGHT to a higher level using the menu function.  
The screen is blanked.  
Press the BLANK button to return to the input signal screen.  
19  
Colors have a  
faded- out  
appearance, or  
Color settings are not correctly adjusted.  
Perform picture adjustments by changing the COLOR BAL R,  
COLOR BAL G, COLOR BAL B, COLOR and/or TINT settings, using  
24  
23  
Color tone is poor. the menu functions.  
The brightness and/or contrast are adjusted to an extremely low  
level.  
Adjust the BRIGHT and/or CONTRAST settings to a higher level  
using the menu function.  
Pictures appear  
dark.  
The WHISPER function is working.  
Select the NORMAL to the item WHISPER in the MAIN menu.  
23  
The lamp is approaching the end of its product lifetime.  
Replace the lamp.  
35, 36  
Either the focus and/or horizontal phase settings are not  
properly.  
16  
Adjust the focus using the focus buttons, and/or H PHASE using the  
menu function.  
Pictures appear  
blurry.  
The lens is dirty or misty.  
38  
16  
Clean the lens by referring to the section “Caring For The Lens”.  
Input signal  
changes with no  
operation.  
The INPUT dial is set between the click points.  
Turn the INPUT dial and set it at a click point.  
© 3M 2004 3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
Specifications  
NOTE  
• This specifications are subject to change without notice.  
Item  
Specification  
Product name  
Liquid crystal projector  
2.5 cm (0.99 type)  
TFT active matrix  
Panel size  
Drive system  
Pixels  
Liquid  
crystal  
panel  
786,432 pixels (1024 horizontal x 768 vertical)  
Zoom lens F=1.7 ~ 2.4 f=30.5 ~ 45.8 mm  
Lens  
X70:275W UHB  
X80:310W UHB  
Lamp  
Speaker  
1.0W + 1.0W (Stereo)  
X70:AC100 ~ 120V, 4.7A / AC220 ~ 240V, 2.0A  
X80:AC100 ~ 120V, 5.2A / AC220 ~ 240V, 2.2A  
Power supply  
X70:430W  
X80:470W  
Power consumption  
Temperature range  
0 ~ 35°C (Operating)  
420 (W) x 150 (H) x 336 (D) mm (Not including protruding parts)  
• Please refer to the figure of the section “TECHNICAL” of the  
end of this manual.  
Size  
Weight (mass)  
7.7 kg  
RGB input ports  
rgb  
RGB output port  
rgb out  
M1-D  
BNC (R, G, B, H, V)  
Audio output port  
audio out  
Video input ports  
video in  
S-video in  
Control port  
control  
Ports  
component  
(CR/PR, CB/PB, Y)  
Other ports  
network  
Audio input ports  
audio in 1  
remote control  
dc out  
audio in 2  
audio in R/L  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories  
Accessories ............................................................... Part Number  
UHB Lamp, 275W (X70) ............................................................................. 78-6969-9718-4  
UHB Lamp, 310W (X80) ............................................................................. 78-6969-9719-2  
Air Filter ...................................................................................................... 78-8118-9187-4  
Power Cord (US) ......................................................................................... 78-8118-8102-4  
Power Cord (UK) ......................................................................................... 78-8118-8101-6  
Power Cord (Europe) .................................................................................. 78-8118-8103-2  
VGA Cable .................................................................................................. 78-8118-8708-8  
RCA Video/Audio Cable .............................................................................. 78-8118-3234-0  
M1-D Cable ................................................................................................. 78-8118-9276-5  
Remote Control (X70)................................................................................... 78-8118-9274-0  
Remote Control (X80)................................................................................... 78-8118-9275-7  
Not Included with Basic Packet................................ Part Number  
Ceiling Mount .............................................................................................. 78-6969-9697-0  
Adjustable Height Suspension .................................................................... 78-6969-9699-6  
Shipping Case ............................................................................................. 78-6969-8925-6  
Soft rolling case ........................................................................................... 78-6969-8926-4  
RCA Component Cable ............................................................................... 78-8118-8843-3  
S-Video Cable ....................................................................................... ...... 78-8118-3238-1  
Stereo Mini-Cable................................................................................. ....... 78-8118-8846-6  
RS-232C Cable ..................................................................................... ...... 78-8118-9192-4  
Ultra value warranty X70 (US only) ........................................................ ..... 78-6969-9708-5  
Ultra value warranty X80 (US only) ............................................................ . 78-6969-9709-3  
Mac Adapter ................................................................................................ 78-8118-3308-2  
How to Order  
Please order these parts through your dealer, or contact 3M Customer Service at the  
following number:  
In U.S. or Canada : 1-800-328-1371  
In other locations, contact your local 3M sales office.  
48  
© 3M 2004  
3M™ Multimedia Projector X70/X80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Intended Use  
Before operating this machine, please read this entire manual thoroughly. The 3MTM Multimedia Projectors are designed, built, and tested for use indoors,  
using 3M lamps, 3M ceiling mount hardware, and nominal local voltages.  
The use of other replacement lamps, outdoor operation, or different voltages has not been tested and could damage the projector peripheral equipment  
and/or create a potentially unsafe operating condition.  
3M Multimedia projectors and Wall Display Systems are designed to operate in a normal office environment.  
• 16˚ to 29˚C (60˚ to 85˚ F)  
• 10- 80 %RH (without condensation)  
•
0- 1828 m (0-6000 feet) above sea level  
The ambient operating environment should be free of airborne smoke, grease, oil and other contaminates that can affect the operation or performance of the  
projector.  
Use of this product in adverse conditions will void the product warranty.  
Let us help you make the most of your next presentation. We offer everything from presentation supplies to tips for better meetings. And we're the only  
transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy reference and free product samples, call  
us toll-free in the continental United States and Canada, 24 hours a day, or visit our Internet Website.  
3M Austin Center  
3M Canada  
3M Mexico, S.A. de C.V.  
3M Europe  
Building A145-5N-01  
6801 River Place Blvd.  
Austin, TX 78726-9000  
P.O. Box 5757  
London, Ontario  
N6A 4T1  
Apartado Postal 14-139  
Mexico, D.F. 07000  
Mexico  
Boulevard de l'Oise  
95006 Cerge Pontoise Cedex  
France  
Litho in Japan  
© 3M 2004  
78-6970-9368-6 Rev. A  
DN00591 (X70/X80_OG_ENG)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Air Compressor 100 200 HP 75 160 KW User Manual
Ingersoll Rand Heat Pump 670003 User Manual
Intelligent Motion Systems Home Safety Product MDrive23 User Manual
Joytech Video Game Controller 240C User Manual
JVC Camcorder Compact VHS User Manual
JVC Camera Accessories KA R60 User Manual
JVC Digital Camera LYT1624 001B User Manual
KEF Audio Speaker Ci1602FR User Manual
Kenmore Cooktop 7907936 User Manual
Klipsch Portable Speaker CDT ARCHITECTURALCDT ARCHITECTURAL User Manual