Quick Setup Guide I NS-R5101HD 5.1 Receiver
1 Install remote control batteries
Congratulations on your purchase of
a high-quality Insignia product. Your
5.1-channel surround sound receiver
is designed for reliable and trouble-
free performance.
Remove the cover from the back of the remote control, insert the batteries
as indicated in the battery compartment, then replace the cover.
2 Connect speakers
Position speakers around your room and connect as shown.
Loosen cap, insert speaker wire into the side, then tighten cap.
Use this guide for initial setup of your
receiver. If you have questions, see
your User Guide for more information.
Front
right
Front
left
Center
Package contents
• Remote control
• AAA batteries
• FM antenna
• AM loop antenna
• Microphone for auto setup
• Quick Setup Guide
• User Guide
Power amplifier
Surround back
speakers
Powered subwoofer
1
2
3
4
TV or screen
5
6
7
8
Front right speaker
Front left speaker
Subwoofer
Surround back left speaker
Surround back right speaker
Listening position
Center speaker
AAA batteries
Surround Surround
right left
Microphone
3 Connect devices
You can connect headphones and one device, such as game console or video camera, to the front of your NS-R5101 receiver.
Remote
control
ON/STANDBY
Press to turn on your receiver
or put it in standby mode
during normal operation.
Speaker On/Off
Input Selector
Press to turn off speakers
when using headphones or
TV speakers.
Turn the knob to switch
between components such
as tuner, DVD, CD, or TV.
Volume
FM antenna
AM loop antenna
Power
Press to turn off main power before
connecting components.
Video 3 Input
Tuning/Preset
Connect a game console
or video camera here.
Press TUNING buttons to choose an AM
or FM radio station. Press PRESET buttons
to choose a saved station.
BAND
Press to select
the radio band,
FM, FM-MONO,
or AM.
Headphone Jack
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a TV
Connecting a Blu-ray Disc player or DVD player
To connect a TV using HDMI (Best):
• Connect an HDMI cable to the
HDMI OUT jack on the back of
your receiver and to the HDMI IN
jack on the TV.
To connect a Blu-ray Disc player or DVD
player using HDMI (Best):
To connect a Blu-ray Disc player or DVD player
using component video (Better):
To connect a Blu-ray Disc player or DVD player
using standard (composite) video (Good):
1 Connect a standard video cable to the VIDEO
DVD IN jack on the back of your receiver and
to the VIDEO OUT jack on the player.
• Connect an HDMI cable to the HDMI IN DVD
jack on the back of your receiver and to the
HDMI OUT jack on the player.
1 Connect a component video cable to the
COMPONENT VIDEO IN 1 (DVD) jacks on the
back of your receiver and to the COMPONENT
VIDEO OUT jacks on the player.
NOTE: An HDMI cable carries both video and audio. You do
not need to make an audio connection.
Blu-Ray Disc player
or DVD player
Blu-Ray Disc player
or DVD player
Blu-Ray Disc player
or DVD player
To connect a TV using component video (Better):
Connect a component video cable to the COMPONENT VIDEO
OUT jacks on the back of your receiver and to the COMPONENT
VIDEO IN jacks on the TV.
2 Connect an audio cable to the DVD IN AUDIO L/R
jacks on the back of your receiver and to the AUDIO
OUT jacks on the player. Or use digital (noted
below) for better Audio experience.
2 Connect an audio cable to the AUDIO IN DVD
jacks on the back of your receiver and to the
AUDIO OUT jacks on the player. Or use digital
(noted below) for better Audio experience.
NOTE: An HDMI cable carries both video and audio.
You do not need to make an audio connection.
Connecting a Cable TV or Satellite Box
To connect a TV using standard (composite) video (Good):
Connect a standard (composite) video cable to the MONITOR OUT
jack on the back of your receiver and to the VIDEO IN jack on the TV.
To connect a cable or satellite box using
CABLE/SAT box using HDMI (Best):
To connect a cable or satellite box using
CABLE/SAT box using component video (Better):
1 Connect a component video cable to the
COMPONENT VIDEO IN 2 (CABLE/SAT) jacks
on the back of your receiver and to the
To connect a cable or satellite box using CABLE/
SAT box using standard (composite) video (Good):
1 Connect a standard video cable to the VIDEO
CABLE/SAT IN jack on the back of your receiver
and to the VIDEO OUT jack on the player.
• Connect an HDMI cable to the HDMI IN
CABLE/SAT jack on the back of your receiver
and to the HDMI OUT jack on the player.
COMPONENT VIDEO OUT jacks on the player.
Blu-Ray Disc player
or CABLE/SAT box
Blu-Ray Disc player
or CABLE/SAT box
Blu-Ray Disc player
or CABLE/SAT box
To connect a TV to hear its sound through the receiver:
Connect an audio cable to the TV IN AUDIO L/R jacks on the back of
your receiver and to the AUDIO OUT jacks on the TV.
NOTE: When viewing video program sources through MONITOR OUT jack, you must use the same type of video
jacks that you did connect to video playback components such as Blu-ray Disc player, DVD player, or cable TV
tuner.
CABLE/
SAT
2 Connect an audio cable to the CABLE/SAT IN
AUDIO L/R jacks on the back of your receiver
and to the AUDIO OUT jacks on the player or use
digital (noted below) for better Audio experience.
2 Connect an audio cable to the AUDIO IN
CABLE/SAT jacks on the back of your receiver
and to the AUDIO OUT jacks on the player or use
digital (noted below) for better Audio experience.
NOTE: An HDMI cable carries both video and audio.
You do not need to make an audio connection.
Connecting a device to the front AV jacks
To connect a device to the front
AV jacks:
1 Connect a standard (composite)
video cable to the AUX 1 VIDEO
jack on the front of your receiver
and to a standard video device.
Connecting digital audio
To connect digital audio:
1 Connect the video for a device to the CD, GAME/AUX2, DVD, or
3 Press input selector button on the remote control (CD,
GAME/AUX2, DVD, or CABLE/SAT) to select the video
jack(s) the device is connected to, then press D.INPUTS
one or more times to select the audio jack(s) the device
is connected to. Each time you press D.INPUTS the
audio source changes from O(ptical) 1, to O(ptical) 2, to
CABLE/SAT video jack(s).
2 Connect the digital audio for the device to a digital audio jack
on the back of your receiver.
• If the device has a coaxial digital audio jack, connect a 75Ω
coaxial digital audio cable to the COAXIAL IN 1 (DVD) jack on
the back of your receiver and to the COAXIAL OUT jack on the
digital audio device.
2 Connect an audio cable to the
C(oaxial) 1, H(DMI), or A(nalog).
AUX 1 L/R jacks on the front of
your receiver and to the audio
out jacks on the device.
NOTE: If you press select CD, you cannot select HDMI as the audio source.
NOTE: The default settings are as for the digital audio jacks are:
• OPTICAL IN 1 for devices connected to the video GAME/AUX 2 jack.
• OPTICAL IN 2 for devices connected to the video CABLE/SAT jack.
• COAXIAL IN 1 for devices connected to DVD video jack.
Or,
• If the device has an optical digital audio jack, connect an
optical digital audio cable to the OPTICAL IN 1 (GAME/AUX2)
or OPTICAL IN 2 (CABLE/SAT) jack on the back of your receiver
and to the OPTICAL OUT jack on the digital audio device.
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Connect power
5 Complete setup
1. Connect the power cord to a power outlet.
•
Press the input buttons on your remote control or rotate the INPUT SELECTOR knob on the
front of your receiver to switch between devices. See“Selecting the input source”in your User
Guide for more information.
2. Press POWER on the front of your receiver.
3. Press STANDBY/ON on the receiver or POWER ON on your remote control to turn on the receiver.
•
Press the SOUND PARAMETER button on your remote control to adjust the sound
parameter. See“Adjusting sound parameters”in your User Guide for more information.
INPUT SELECTOR knob (receiver front)
Input buttons (remote control)
Adjust speaker settings with Auto Setup
1. Connect the supplied microphone to the SETUP MIC jack
NOTES:
on the front of your receiver.
•
•
Because the microphone for Auto Setup is designed for use with this receiver,
do not use a microphone other than the one supplied with this receiver.
After you have completed the auto setup procedure, disconnect the
microphone.
2. For best results, place the microphone close to the area in
which you’ll be sitting.
3. See“Setting the listening environment (ROOM EQ)”in your
User Guide for more information on how to complete the
auto speaker setup procedure.
For additional help setting up your receiver, call (877) 467-4289.
For information on using your receiver or for basic troubleshooting tips, see the Troubleshooting section in your User Guide.
09-0363
© 2009 Best Buy Enterprise Services, Inc. Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645 www.insigniaproducts.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|