Quick Installation Guide
NS-B4111/NS-B4111TA/NS-4111B/NS-4111G/NS-4111TU CD Boombox
Read these instructions carefully before using this product, and retain
them in a safe place for reference.
Front
Using your CD player
Warning: Use of any controls, adjustments, or procedures
other than those specified herein may result in hazardous
radiation exposure.
Features
Top
Using the radio
1 Slide the FUNCTION selector to RADIO, then press AM/FM
to select AM or FM mode.
2 Turn the TUNING control until you locate the station you want.
If you tune to an FM station broadcasting in stereo, the
stereo indicator turns on. “ST”will appear in the upper-right
of the LCD screen when stereo is on.
•
For optimum FM reception, make sure that the FM
(telescopic) antenna is fully extended and vertical.
1
2
3
4
5
6
7
Speaker
8
9
Speaker
•
For optimum AM reception, rotate the CD player to orient
its built-in antenna until you get the strongest signal.
Light button
AM/FM button
Random button
CD track display
Repeat button
CD stop
CD skip down
1
2
3
4
Handle
5
6
7
8
Function (RADIO/CD/AUX)
Power (ON/OFF)
10 CD skip up
CD door
Using the CD player
The CD player can play standard audio CDs and audio CDs
created on a computer’s CD-R/CD-RW drive.
1 Slide the FUNCTION selector to CD, then lift the CD door
and insert a CD with the label facing up. Make sure that the
CD is correctly mounted on the spindle and locked in place.
11 CD search down button
12 CD search up button
13 CD play/pause button
Volume control
FM antenna
Tuning control
CD door open (push tab)
Back
2 Close the CD door. After a few seconds, the display shows
Setting up your CD player
the total number of tracks on the CD. If the disc is not
Connecting AC power
correctly inserted or defective, the display shows
.
1 Connect the provided AC power cord to the AC input socket
To play the CD
Press PLAY/PAUSE. The current track number is
shown on the display.
on the CD player.
2 Plug the cord into a household AC power socket.
To pause
playback
Press PLAY/PAUSE. The play indicator flashes on the
display. Press PLAY/PAUSE again to resume playback.
Installing batteries
1 Insert eight C alkaline batteries (not included) into the
battery compartment as indicated by the diagram within
the compartment.
To stop playback Press STOP. The display shows the total number of
tracks on the CD.
-
+
-
-
+
-
+
-
+
-
+
-
+
-
1.5V x 8 UM 2 or
“C” size or LR14
To skip tracks
Press
or
.
To repeat the
current track
PressREPEAT.Torepeattheentiredisc(continuous
play), press REPEAT twice. To return to normal
play, press REPEAT until“REPEAT”disappears from
the display.
2 Securely close the battery compartment cover.
Notes: Battery power is used only when AC power is
disconnected.
+
+
1
2
3
4
AUX IN jack
Battery compartment
Replace all batteries at the same time with the same battery
type. Do not mix battery types.
When CD player is stored unused for a long time, remove the
To play tracks in PressSTOP,pressRANDOM,thenpressPLAY/PAUSE.
random order To stop random playback, press RANDOM again.
Headphone jack
AC input
batteries to prevent damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
|